router bits - Carbide Tools

Transcription

Company Statement:
Our investment in new technology with C.N.C. (computerised numerical controlled) equipment ensures our
commitment to AUSTRALIAN MANUFACTURE and ultimate control in developing the highest reputation for
cutting tool quality.
The combination of design and productive excellence means satisfaction when you order CARB-I-TOOL
Router Bits.
It is the aim of the company to employ its skills and resources towards the continuing needs and expectations
of its customers, so as to maintain a reputation for excellence relating to the timely supply of competitive and
affordable products. This is achieved through a commitment to ongoing quality improvement
CARBIDE GRINDING
Australian Made ANCA MX7 and TGX-7 grinding machines with automatic loaders
ensure Carb-I-Tool router bits are manufactured to exact tolerances with superior
cutting edge sharpness
DIAMOND GRINDING
Manufacture and servicing of PCD and CBN tools for the automotive,
aerospace, woodworking and general engineering industries. This
automatic CNC machine produces high cutting edge accuracy and
surface finish as well as accurate repeatability
Carb-I-Tool (Aust.) Pty. Ltd. - new modern administration, warehouse and manufacturing plant at 10-12 Levanswell Road, Moorabbin, Victoria, 3189 Australia.
Carb-I-Tool (Aust.) Pty. Ltd. - has an ongoing program to improve and update the product range, and therefore reserves the right to change specifications where necessary.
ROUTER BIT TERMINOLOGY
Prefix
Prefix
Suffix
Suffix
Suffix
Suffix
H - High Speed Steel
T - Carbide Tipped or Solid Carbide
A - Carbide Tip on Nose (Pilot Panel Bits)
B - Ball Bearing Guide
E/C
- End Cutting
M - Metric Size
Note: The last two numerical digits denote cutting size ie.
Metric T 216 M = 16mm Dia.
Imperial T 224 = 24/32 = 3/4”Dia.
Suffix
Suffix
Suffix
Suffix
Suffix
S
3/8
1/2
10mm
5/16
- Single Flute
- 3/8”Diameter Shank
- 1/2”Diameter Shank
- 10 mm Diameter Shank
- 5/16” Diameter Shank
A
B
Otherwise
C
1/4”
Diameter
Shanks
Affix X
- Long Series Router Bits.
Not guaranteed against Breakage
Affix XX
- Extra Long Series Router Bits.
Not guaranteed against
Breakage
= Cutting Width
= Flute Length
= Overall Length. On router
bits with bearings. Includes
bearing and screw.
E
= Pilot Width or Bearing Width
ID
= Inside Diameter
T
= Wood Thickness
G
= Depth of Cut
Bevel
= Bevel
R, R1, R2 = Radii
CONTENTS
SAFETY TIPS
& HELPFUL HINTS
Premium Quality Router Bits
1. Always keep collet clean. Replace when worn.
80% of all tool breakage is directly traced to worn
‘ovalized’ collets. Resolve breakage by changing to a
new collet.
2. Insert shank 19mm (3/4”) into collet.
Holding only the upper edge of the shank by the lower
portion of the collet will inevitably lead to Router Bit
breakage, spindle nose wear, and collet bell-mouthing.
3. Tighten the collet securely.
4. Store your bits in a Plastic Pouch.
Do not let them lay loose in your tool box.
5. Clean Ball Bearings with solvent, then submerge them
in thin oil lubricant.
6. Have your tools serviced by a professional service
shop. A properly sharpened tool is vital to the success,
quality and profitability of your operation. Remove the
tool for servicing whenever poor job finish or increased
feed pressure indicates a dull cutting edge. Also
remove the tool for servicing at the slightest sign of a
chip or nick in the cutting edge.
7. We recommend the use of 12.7mm (1/2”) diameter
shanks where possible, for more stability and less
chatter.
8. Router Bits over 38mm (11/2”) in diameter should be
used in bench or overhead machines. Ensure
appropriate speeds, feeds and number of passes are
used for bits over 50mm (2”) in diameter.
Consult your machine manual, supplier and Router
Speed Guide (below) for specific advice.
ROUTER BIT ROUTER BIT WOOD PLASTICS ALUMINIUM
DIAMETER
CUTTING
& NONLENGTH
FERROUS
METALS
Up to 26mm
Up to 26mm
26.1-50mm
26.1-50mm
51.1-63mm
51.1-63mm
63.1-77mm
Max 38mm
38.1mm +
Max 50mm
50.1mm +
Max 63mm
63.1mm +
Max 75mm
24 000
18 000
18 000
16 000
16 000
12 000
12 000
18 000
14 000
14 000
12 000
12 000
10 000
10 000
14 000
12 000
12 000
10 000
10 000
9 000
9 000
SPIRAL FLUTE WOOD ROUTERS
FEED RATE (M/MIN)
BASED ON 1/2” DIAM. TOOL CUTTING 19MM STOCK AT 18000RPM.
TOOL
HARD
WOOD
SOFT COMPOSITES
WOOD (MDF, ETC.)
1 Flute Compression
2 Flute Compression
3 Flute Compression
4 Flute Compression
4 Flute Combined
Compression
3-15
10-25
12-35
12-35
3-15
10-30
12-40
12-40
3-12
10-15
15-30
15-40
25-45
25-45
25-50
2 Flute Standard Spiral
3 Flute Standard Sprial
5-10
5-12
5-11
5-13
5-11
5-11
3 Flute Roughing
3 Flute Chipbreaker
4 Flute Rougher/Finisher
15-25
12-35
20-45
15-25
12-40
20-45
12-25
15-30
25-50
Actual feed rates will be subject to the effect or variables
such as workpiece and machine rigidity, type of material
(hard/soft wood), collet condition, horsepower, top edge
wear, etc. Best to start at a moderate feed rate and increase
until desired finish is attained.
For smaller diameter tools – reduce feed rate.
For larger diameter tools – increase feed rate.
RESHARPENING
Tools can be returned to Carb-I-Tool
or sent to your local service shop.
WHEN USING A ROUTING MACHINE, PROTECTION AGAINST
INJURY SHOULD ALWAYS BE USED.
•
•
•
PAGE
EAR MUFFS
SAFETY GLASSES
DUST MASK AND/OR EXTRACTION
PROCEDURES
IMPORTANT
Router bits turn clockwise in the free hand position and
anticlockwise when inverted in a router table. Always feed
your workpiece against the rotation. Work holding jigs
should be used in these instances. Failure to do so may
harm router bits or cause injury.
Page
Aluminium Cutting Bits
Allen Keys
Arbors
4 - 36
Page
4 Edge Band Trim Bits
36 Edge and Draw
36
Face Bits
Batten Mould Bits
25
Ball End Bits
15
Beading Bits
(with bearing)
19, 20
Beading Bits
(no bearing) 17, 18, 19
Bearings
22, 36, 42, 43
Bevel Trim Bits
12
Bull Nose Bits
23
Canoe Slat Bits
23
Chamfering Bits
22
Chipbreaker Spiral Bits 4
Classical Bits
(no bearing)
17
Classical Bits
(with bearing)
21
Collets
36
Combination Flush,
Bevel, Trim
11, 12
Combination Flush,
Drill, Trim
9, 11, 12
Combination
Multi-Form Bits
26
Compression Bits
5
Core Box Bits
15, 16
Cove Bits
20, 21
Dish Cut Bits
18
Double Edge Radius Bits 25
Dovetail Bits
13
Drawer Pull Bits
13
Drawer Joint Bits
31
Drawing Line Bits
23
Drip Seal Groover Bits 13
12
20
Face Moulding Bits
(architrave, sills, etc) 28, 29
Fibreglass Bits
6
Finger Joint Bits
30
Finishing Spiral Bits
5
Flush Trim Bits
10, 12
Foam Cutting Bits
4
Groove Forming Bits
Gifkin Bits
12-14
13
Handrail Bits
Page
Raised Panel Bits
33, 34
Rebating Bits
22
Regency Bits
30
Reed Bits
25
Replaceable Tip Bits 38-42
Roman Ogee Bits
24
Rougher/Finisher Spiral 4
Roughing Spiral Bits
4
Rounding Over Bits
(no bearing)
18, 19
Rounding Over Bits
(with bearing)
19
Round Nose Bits
15
23
Slot Mortise Bits
8
8
Slotting Cutters
9, 35
14
Solid Surface Bits 26, 27
Jointing Bits
31 Spiral Wood Bits
(with bearing)
10
Kits
9, 36
Stair Handrail Bits
23
Laminate Trim Bits 10, 11, 12 Straight Bits 4, 5, 6, 7, 8
Lock Mortise Bits
8 Table Edge Bits
25
Leigh Bits
13 Tongue and
Groove Bits
31
Mitre Lock Bits
31
Toy
Wheel
Cutters
37
Mortise Bits
8
Traditional Classical
Ogee Bits
(no bearing)
17
(no bearing)
16 Traditioinal Classical
Ogee Bits
(with bearing)
17, 21
(with bearing)
24 Trim Saws
9
Palace Pattern Bits
18 T-Slot Bits
14
Panel Door Bits
32, 33 Vee Groove Bits
14, 15
Pilot Panel Bits
9 Veining Bits
15
Plastic Cutting Bits
4
31
Polystyrene Bits
4 Wavy Joint Bit
Window Sash
Provincial Bits
33
(with bearing)
16, 21 and Rail Bits
Wood
Boring
Drills
37
Provincial Bits
(no bearing)
18
Hinge Mortise Bits
Hook Slot Bits
Wood Boring Drills
Replaceable Insert Router Bits
Diamond Tipped Tools (PCD)
Saw Blades, Holesaws
37
38 - 42
Diamond Grinding Cup Wheels
Diamond Coated Router Bits
Trade Blade Portable Range
Bench Saw Range Hole
Holesaws - Wood
Holesaws - Other
Handsaws
Jigsaw and Reciprocating Saw Blades
Econocut Router Bits and Kits
Planer and Buzzer Blades
Accessories
46 - 48
49 - 50
51
52 - 53
Carbide Tipped Holesaw
Drill Countersink Bits
HSS and TCT Forstner Bits
Adjustable Circle Cutter – Wood
Auger Bits
Drill Saws
Hollow Mortise Chisels
Rosette Cutters
HSS Countersinks
Plug Cutters
Quick Change Chuck
Contour Gauge
Router Base Adapter Kit
Rotary Rasps
Drum Sanding Kit
Step Gauge
Router Table
Mitre Gauge
Adjustable Clamps
43 - 45
54
Expansion Drill Bits
Wood Chisels
Brad Point Drills
Multi-Angle Drill Bits
55
Spade Bits
Hinge Drill Bits
Corner Chisel
Step Drills
Masonry Drill Bits
Template Guide Kit
Router Depth Gauge
Mounted Points
57
56
58
59
Aluminium Insert Plate
Bar Clamp / Spreader
60
Corner Clamps
PVA Glue
Diamond Saw Blade
Diamond Points
Adjustable Hole Saw – Ceramics
Safety Aids
Wood Joining Biscuits
61
62
Glass and Tile Drills
Sharpening Stones
Specialised Lubricants
61
63
64
Premium
Quality
STRAIGHT BITS
ROUTER BITS
FOR PLASTICS
FOR NON FERROUS METALS,
SOLID CARBIDE
SINGLE FLUTE
C
B
For plastics including
Bakelite, Acetate, Plexi,
PVC, Nylon, etc.
UP CUT
PART No.
TSPR 02 MS
TSPR 03 MS
TSPR 04 S
TSPR 04 MS
TSPR 06 S
TSPR 08 S
TXSPR 08 S
A
(ALUMINIUM, LAMINATES, ETC)
For aluminium, laminates, etc. Down cut pushes chips below
the work. Ideal for trimming laminates and through cutting.
Up cuts are ideal for grooving, slotting and routing.
SOLID CARBIDE – TWO FLUTE
DOWN CUT
A
PART No.
in.
TSPL 02 MS
TSPL 03 MS
TSPL 04 S
1/8
TSPL 04 MS
TSPL 06 S
3/16
TSPL 08 S
1/4
TXSPL 08 S 1/4
B
mm
2
3
3.18
4
4.75
6.35
6.35
in.
C
in.
1-1/2
1-1/2
1-1/2
2
2
2
3-5/32
mm
8
10
12.7
12
16
19
38.1
1/2
5/8
3/4
1-1/2
mm
38.1
38.1
38.1
50.8
50.8
50.8
80
C
SHANK
mm
2
3
6.35
4
6.35
6.35
6.35
UP CUT
PART No.
TSR 8
TXSR 8
TSR 12 3/8
TSR 16 1/2
SOLID CARBIDE - SINGLE FLUTE
A
TSP08 SH
TSL 8
TXSL 8
TSL 12 3/8
TSL 16 1/2
in.
1/4
1/4
3/8
1/2
B
mm
6.35
6.35
9.53
12.7
C
in.
mm
in.
3/4
19
2-1/2
1
25.4 2-1/2
1
25.4 2-1/2
1-1/4 31.75
3
mm
63.5
63.5
63.5
76.2
WOOD CUTTING
ROUGHING SPIRAL BITS
For hard plastics and Aluminium
in.
1/4
A
PART No.
B
A
PART No.
DOWN CUT
B
mm
6.35
SOLID CARBIDE - THREE FLUTE
C
in.
3/4
mm
19
in.
2-1/2
mm
63.5
For increased feed rates to give fast routing of hard materials.
C
B
A
UP CUT
DOWN CUT
SOLID CARBIDE - SINGLE FLUTE - EDGE ROUND FOR PLASTIC
PART No.
For rounding the edge on plastic sheets or parts
PART No.
TSPER08S
A
in.
1/4
B
mm
6.35
in.
3/8
C
mm
9.5
in.
2-1/2
Radius
in.
mm
1/4
6.35
mm
63.5
TSRR 8
TSRR 8 M
TSRR 12 3/8
TSRR 10 M
TSRR 12 M
TSRR 16 1/2
TSRR 16 M
TSRR 20 M
A
PART No.
in.
1/4
TSLR 12 3/8
3/8
TSLR 16 1/2
TSLR 16 M
1/2
B
mm
6.35
8
9.53
10
12
12.7
16
20
C
in.
3/4
mm
in.
19.05 2-1/2
25
1
25.4 2-1/2
25
32
1-1/4 31.75
3
35
40
mm
63.5
63
63.5
75
75
76.2
92
104
SOLID CARBIDE - 2 FLUTE FOAM CUTTER
3 FLUTE CHIPBREAKER SPIRAL
Ideal for cutting low density foam materials at high feed rates
A
PART No.
in.
1/4
3/8
TSFHH08
TSFHH12 3/8
B
mm
6.35
9.5
in.
2
2
SOLID CARBIDE
C
mm
50.4
50.4
in.
4
4
mm
101.6
101.6
UP CUT
SOLID CARBIDE - 3 FLUTE POLYSTYRENE BIT
For polystyrene
PART No.
TSF 8
TSF 12 3/8
The chipbreaker grind is staggered on each flute which produces
small chips and leaves a clean cut at high feed rates as well as
minimising vibration. For hardwoods and dense materials.
PART No.
A
in.
1/4
3/8
B
mm
6.35
9.5
in.
2-1/4
2-1/4
DOWN CUT
mm
57.1
57.1
in.
4
4
mm
101.6
101.6
SOLID CARBIDE – SINGLE “SPOON” FLUTE
A
PART No.
C
TSRCB 12 3/8 TSLCB 12 3/8
TXSRCB 16 1/2 TXSLCB 16 1/2
TSRCB 16 M
TSLCB 16 M
in.
3/8
1/2
B
mm
9.5
12.7
16
in.
1-1/4
1-3/4
C
mm
31.8
44.4
41
in.
3
3-5/8
mm
76.2
92
92
4 FLUTE ROUGHER FINISHER
For aluminium and some soft plastics.
SOLID CARBIDE
C
NEW
B
A
PART No.
•
4
TSP 04 S
TSP 04 MS
TSP 06 S
TSP 06 MS
TSP 08 S
A
in.
1/8
5/32
3/16
15/64
1/4
B
mm
3.18
4
4.75
6
6.35
in.
5/16
1/2
1/2
5/8
5/8
UP CUT
C
mm
7.94
12.7
12.7
16
16
in.
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
mm
57.1
57.15
57.15
57.15
57.15
PART No.
DOWN CUT
A
PART No.
T4SRRF 12 3/8 T4SLRF 12 3/8
T4SRRF 16 1/2 T4SLRF 16 1/2
T4XSRRF 16 1/2 T4XSLRF 16 1/2
in.
3/8
1/2
1/2
B
mm
9.5
12.7
12.7
in.
mm
in.
1-1/4 31.75
3
1-1/4 31.8
3
1-1/2 38 3-5/8
C
mm
76.2
76.2
92
Premium
Quality
STRAIGHT BITS
FINISHING SPIRALS FOR WOOD
COMPRESSION BITS
For superior edge finish on all types of material. Hardwoods, Softwoods,
Laminates, Composites etc.
Up cut brings the swarf up and out of the cut.
Down cut drives the swarf down and out of the cut.
Compression (up/down) Spiral Bits - The geometry of these tools prevents the
chipping and furring on the top and bottom surfaces of the material being cut.
Ideal for cutting double sided laminates (melamine, vinyl, spray coatings,
painted board etc.) as well as natural timbers. 3 and 4 flute tools allow for
increased high speed machining with high spindle speeds.
SUFFIX 1/2 = 1/2” SHANK, SUFFIX 5/16”= 5/16” SHANK,
SUFFIX 3/8 = 3/8” SHANK, OTHERWISE 1/4”
SUFFIX M = SHANK DIAM. SAME AS CUTTING DIAM.
SUFFIX E = Extra long flute
FOR COMPRESSION BITS, SHANK DIAMETERS ARE THE SAME
AS ‘A’ DIMENSION
C
B
UNCOATED
A
TiN COATED
A
2 FLUTE FINISHING SPIRAL
UP CUT
DOWN CUT
PART No.
TSRW 4
TSRW 5
TSRW 6
TSSRW 8
TSRW 8
TXSRW 8
TSRW 10 5/16
TSRW 10 1/2
TSRW 8 M
TSRW 12 3/8
TSRW 12 1/2
TSRW 10 M
TSRW 12 M
TSRW 16 1/2
TXSRW 16 1/2
TXXSRW 16 1/2
TSRW 16 M
TSRW 20 M
U
N
C
O
A
PART No.
in.
1/8
5/32
3/16
1/4
1/4
1/4
5/16
5/16
TSLW 4
TSLW 5
TSLW 6
TSLW 8
TXSLW 8
TSLW 10 5/16
TSLW 10 1/2
TSLW 8 M
TSLW 12 3/8
TSLW 12 1/2
TSLW 10 M
TSLW 12 M
TSLW 16 1/2
TXSLW 16 1/2
TXXSLW 16 1/2
TSLW 16 M
TSLW 20 M
3/8
3/8
1/2
1/2
1/2
A
T
E
D
B
C
mm
in.
mm
3.18 1/2 12.7
3.96 5/8
16
4.75 3/4
19
6.35 5/8
16
6.35 3/4
19
6.35
1
25.4
7.94
1
25.4
7.94
1
25.4
8
25
9.53
1
25.4
9.53
1
25.4
10
25
12
32
12.7 1-1/4 31.8
12.7 1-1/4 38.1
12.7
2
50.8
16
35
20
40
in.
2-1/4
2-1/4
2-1/4
2
2-1/2
2-1/2
2-1/2
3
mm
57.15
57.15
57.15
50.8
63.5
63.5
63.5
76.2
63
2-1/2 63.5
3
76.2
75
75
3
76.2
4
101.6
4
101.6
92
104
Available, ex-stock with Titanium Nitride (TiN) coating. When ordering add a
“T” to the required part number. e.g. TSRW8 is TTSRW8 (TiN Coated).
BEARINGS SEE PAGE 11
FOR SPIRAL BITS WITH BEARI
3 FLUTE
FINISHING SPIRAL
Produces extremely
smooth finishes.
Use for natural
timber and composites.
UP CUT
DOWN CUT
PART No.
T3SRW8
T3SRW 12 3/8
T3SRW 16 1/2
A
PART No.
in.
1/4
3/8
1/2
T3SLW8
T3SLW 12 3/8
T3SLW 16 1/2
B
mm in.
6.35 3/4
9.5 1-1/4
12.7 1-1/4
C
mm
19
31.8
31.8
in.
2-1/2
3
3
mm
63
76
76
SPIRAL BIT WITH
BALL END
Used for round
bottom work where
extra depth and a
superior finish is required.
A
PART No.
TSRWB 8
TSRWB 12 3/8
TSRWB 16 1/2
in.
1/4
3/8
1/2
B
mm
in.
mm
6.35 3/4
19
9.5
1
25.4
12.7 1-1/4 31.8
C
in.
2-1/2
3
3
R RADIUS
mm
63.5
76.2
76.2
in.
1/8
3/16
1/4
mm
25.4
25
32
31.8
35
40
in.
3
mm.
3.2
4.8
6.35
SINGLE FLUTE COMPRESSION
A
PART No.
TSRM 12 3/8
TSRM 10 M
TSRM 12 M
TSRM 16 1/2
TSRM 16 M
TSRM 20 M
in.
3/8
1/2
B
mm
9.53
10
12
12.7
16
20
in.
1
1-1/4
C
3
mm
76.2
75
83
76.2
92
104
2 FLUTE COMPRESSION
A
PART No.
in.
mm
T2ESRM08
1/4
6.35
T2ESRM8M
8
T2ESRM12 3/8 3/8
9.5
T2ESRM10M
10
T2SRM16 1/2
1/2
12.7
T2XSRM16 1/2 1/2
12.7
B
in.
7/8
B1
mm
22.2
25
28
28
25.4
35
1-1/8
1
1-3/8
in.
ROUTER BITS
SOLID CARBIDE – SPIRAL TOOLING
C
mm
8
8
8
8
10
10
in.
2-1/2
mm
63.5
63
76
75
76
92
3
3
3-5/8
2 FLUTE COMPRESSION FOR MORTISING (Short Upcut)
A
B
B1
C
PART No.
in.
mm
in.
mm
in.
mm
in.
mm
T2SRM08 Q
1/4 6.35 7/8 22.2
5
2-1/2 63.5
T2SRM8M Q
8
25
5
63
T2SRM12 3/8 Q
3/8
9.5
7/8 22.2
5
3
76
T2SRM10M Q
10
22.2
5
75
T2SRM16 1/2 Q
1/2 12.7
1
25.4
6.35
3
76
T2XESRM16 1/2 Q 1/2 12.7 1-5/8 41.3
6.35 3-5/8 92
3 FLUTE COMPRESSION
A
PART No.
in.
mm
T3ESRM12 3/8 3/8
9.5
T3ESRM10M
10
T3SRM16 1/2
1/2
12.7
T3XSRM16 1/2 1/2
12.7
B
in.
1-1/8
B1
mm
28.6
28
25.4
35
1
1-3/8
in.
C
mm
8
8
10
10
in.
3
mm
76
75
76
92
3
3-5/8
A
B
B1
C
PART No.
in.
mm
in.
mm
in.
mm
in.
T3SRM12 3/8 Q
3/8
9.5
7/8 22.2
5
3
T3SRM10M Q
10
22.2
5
T3SRM16 1/2 Q
1/2 12.7
1
25.4
6.35
3
T3XESRM16 1/2 Q 1/2 12.7 1-5/8 41
6.35 3-5/8
mm
76
75
76
92
4 FLUTE COMPRESSION
A
PART No.
in.
mm
T4SRM16 1/2
1/2
12.7
T4XSRM16 1/2 1/2
12.7
mm
76
92
B
in.
1
1-3/8
B1
mm
25.4
35
in.
C
mm
10
10
in.
3
3-5/8
A
B
B1
C
PART No.
in.
mm
in.
mm
in.
mm
in.
mm
T4SRM16 1/2 Q
1/2 12.7
1
25.4
6.35
3
76
T4XESRM16 1/2 Q 1/2 12.7 1-5/8 41
6.35 3-5/8 92
4 FLUTE COMBINED ROUGHER/FINISHER COMPRESSION
A
B
B1
C
PART No.
in.
mm
in.
mm
in.
mm
in.
mm
T4SRMRF 16 1/2
1/2 12.7
1
25.4
10
3
76
T4XSRMRF16 1/2
1/2 12.7 1-3/8 35
10 3-5/8 92
T4XESRMRF16 1/2 1/2 12.7 1-3/4 44.4
10 3-5/8 92
4 FLUTE COMBINED ROUGHER/FINISHER COMPRESSION
(Short Upcut)
PART No.
T4SRMRF 10M Q
A
in.
B
mm
10
in.
B1
mm
22.2
in.
C
mm
5
in.
mm
75
5
Premium
Quality
ROUTER BITS
STRAIGHT BITS
These bits are used for routing highly abrasive materials such as glass epoxy and fibreglass.
FIBREGLASS BITS
FIBREGLASS BIT WITH PILOT
Can be used for plunge routing due to the end cutting capability.
Used for trimming fibreglass sheets. Pilot enables the tool to run on frames.
SUFFIX 1/2 = 1/2” SHANK, SUFFIX 3/8 = 3/8” SHANK, OTHERWISE 1/4”
A
B
C
SOLID CARBIDE - DIAMOND CUT
PART No.
TG 8
TG 8 E/C
TG 12 3/8
TG 12 3/8 E/C
TG 16 1/2
TG 16 1/2 E/C
SOLID CARBIDE - DIAMOND CUT
A
in.
1/4
1/4
3/8
3/8
1/2
1/2
B
mm
6.35
6.35
9.5
9.5
12.7
12.7
in.
3/4
3/4
1
1
1
1
C
mm
19
19
25.4
25.4
25.4
25.4
in.
2
2
2-1/2
2-1/2
3
3
PART No.
mm
50.8
50.8
63.5
63.5
76
76
TG 8 P
TG 12 3/8 P
TG 16 1/2 P
A
in.
1/4
3/8
1/2
B
mm
6.35
9.5
12.7
in.
3/4
3/4
7/8
C
mm
19
19
22
in.
2-1/2
3
mm
63
83
76
STRAIGHT BITS - STRAIGHT FLUTE
HIGH SPEED STEEL
SOLID CARBIDE
SINGLE FLUTE
SINGLE FLUTE
For all general purpose routing and
grooving. Has the added advantage of
chip clearance plus ease of sharpening
by hand by workers with limited grinding
experience.
Can be used to rout aluminium, zinc,
copper and other soft metals.
For all general purpose routing and
grooving. Has the added advantage
of chip clearance.
C
B
B
HIGH SPEED STEEL
A
H 204S
H 205S
H 204MS
H 206S
H 205MS
H 208S
in.
1/8
5/32
5/32
3/16
1/4
B
mm
3.2
4
4
4.8
5
6.35
SOLID CARBIDE
A
6.35 mm (1/4”) SHANK
PART No.
in.
3/8
5/16
5/16
7/16
7/16
3/4
C
mm
9.5
7.9
7.9
11.1
11.1
19
in.
1-5/8
2
2
1-3/4
1-3/4
2
PART No.
mm
41
50.8
50.8
44.4
44.4
50.8
For general purpose routing, grooving, and rebating.
HIGH SPEED STEEL
6.35 mm (1/4”) SHANK
H 208
HX 208
H 210
H 212
H 214
H 216
H 213M
H 220
H 216M
H 219M
H 224
A
in.
1/4
1/4
5/16
3/8
7/16
1/2
33/64
5/8
5/8
3/4
3/4
B
mm
6.35
6.35
7.9
9.5
11.1
12.7
13
15.9
16
19
19
in.
5/8
1-1/8
3/4
3/4
3/4
3/4
3/4
5/8
5/8
5/8
5/8
T 202 S
T 202 MS
T 203 S
T 203 MS
T 204 S
T 205 S
T 204 MS
T 206 S
T 205 MS
T 207 S
T 206 MS
T 208 S
in.
1-5/8
2-3/8
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
A
in.
1/16
5/64
3/32
1/8
5/32
5/32
3/16
7/32
15/64
1/4
B
mm
1.6
2
2.4
3
3.2
4
4
4.8
5
5.5
6
6.35
in.
3/16
3/16
3/16
1/4
5/16
3/8
7/16
1/2
1/2
1/2
5/8
5/8
C
mm
4.8
4.8
4.8
6.35
7.9
9.5
11.1
12.7
12.7
12.7
15.9
15.9
in.
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
mm
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
38.1
SOLID CARBIDE
C
mm
15.9
28.6
19
19
19
19
19
15.9
15.9
15.9
15.9
A
6.35 mm (1/4”) SHANK
TWO FLUTES
PART No.
C
mm
41
60
44.4
44.4
44.4
44.4
44.4
44.4
44.4
44.4
44.4
LONG SERIES
SINGLE FLUTE
* For maximum rigidity use the
standard length bits (above)
where possible.
C
B
SOLID CARBIDE
A
6.35 mm (1/4”) SHANK
PART No.
HIGH SPEED STEEL
12.7 mm (1/2”) SHANK
A
PART No.
H 1412
H 1416
6
in.
3/8
1/2
B
mm
9.5
12.7
in.
1
1-1/4
C
mm
25.4
31.8
in.
2-3/4
2-3/4
mm
70
70
T 1804 S
T 1804 MS
T 1806 S
T 1805 MS
T 1806 MS
T 1808 S
A
in.
1/8
5/32
3/16
15/64
1/4
B
mm
3.2
4
4.8
5
6
6.35
in.
1/2
5/8
3/4
3/4
1
1
C
mm
12.7
15.9
19
19
25.4
25.4
in.
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
2-1/4
mm
57.1
57.1
57.1
57.1
57.1
57.1
Premium
Quality
STRAIGHT BITS
TWO FLUTE
TWO FLUTE
For all general purpose routing,
grooving, rebating. For longer life
in routing abrasive type
materials.
SOLID CARBIDE INSERT
12.7 mm (1/2”) SHANK
C
PART No.
B
SOLID CARBIDE
6.35 mm (1/4”) SHANK
PART No.
T 206 M
TX 206 M
T 208
TX 208
TXX 208
A
A
in.
15/64
15/64
1/4
1/4
1/4
B
mm
6
6
6.35
6.35
6.35
in.
5/8
1-1/8
5/8
1-1/8
1-1/8
C
mm
16
28.6
15.9
28.6
28.6
in.
1-1/2
2-1/4
1-1/2
2-1/4
2-1/2
mm
19
19
19
19
25.4
19
19
25.4
19
25.4
19
19
19
19
25.4
19
25.4
19
19
19
19
25.4
19
25.4
19
19
19
19
25.4
19
19
19
19
19
19
19
19
19
19
19
in.
1-3/4
1-3/4
1-3/4
1-3/4
2
1-3/4
1-3/4
2
1-3/4
2
1-3/4
1-3/4
1-3/4
1-3/4
2
1-3/4
2
1-3/4
1-3/4
1-3/4
1-3/4
2
1-3/4
2
1-3/4
1-3/4
1-3/4
1-3/4
2
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
1-3/4
6.35 mm (1/4”) SHANK
T 207 M
T 209
T 210
T 208 M
TX 208 M
T 209 M
T 212
TX 212
T 210 M
TX 210 M
T 211 M
T 214
T 212 M
T 216
TX 216
T 213 M
TX 213 M
T 214 M
T 218
T 215 M
T 220
TX 220
T 216 M
TX 216 M
T 216.5 M
T 217 M
T 222
T 218 M
TX 218 M
T 218.5 M
T 219 M
T 224
T 219.5 M
T 220 M
T 226
T 221 M
T 222 M
T 228
T 225 M
T 232
A
in.
9/32
5/16
5/16
5/16
23/64
3/8
3/8
25/64
25/64
7/16
7/16
15/32
1/2
1/2
33/64
33/64
35/64
9/16
19/32
5/8
5/8
5/8
5/8
21/32
43/64
11/16
45/64
45/64
3/4
3/4
49/64
13/16
53/64
7/8
63/64
1
B
mm
7
7.1
7.9
8
8
9
9.5
9.5
10
10
11
11.1
12
12.7
12.7
13
13
14
14.3
15
15.9
15.9
16
16
16.5
17
17.5
18
18
18.5
19
19
19.5
20
20.6
21
22
22.2
25
25.4
in.
3/4
3/4
3/4
3/4
1
3/4
3/4
1
3/4
1
3/4
3/4
3/4
3/4
1
3/4
1
3/4
3/4
3/4
3/4
1
3/4
1
3/4
3/4
3/4
3/4
1
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
T 1406 M
T 1408
T 1410
T 1408 M
A
in.
15/64
1/4
5/16
5/16
B
mm
6
6.35
7.9
8
in.
5/8
5/8
3/4
3/4
C
mm
15.9
15.9
19
19
in.
2-3/4
2-3/4
2-7/8
2-7/8
mm
25.4
25.4
25.4
25.4
25.4
25.4
31.8
31.8
50.8
31.8
50.8
31.8
31.8
38.1
38.1
50.8
38.1
50.8
38.1
38.1
38.1
38.1
50.8
38.1
38.1
50.8
38.1
50.8
38.1
38.1
38.1
38.1
38.1
38.1
31.8
31.8
31.8
31.8
31.8
31.8
31.8
31.8
in.
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
2-3/4
3
3
3-3/4
3
3-3/4
3
3
3-1/4
3-1/4
3-3/4
3-1/4
3-3/4
3-1/4
3-1/4
3-1/4
3-1/4
3-3/4
3-1/4
3-1/4
3-3/4
3-1/4
3-3/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3-1/4
3
3
3
3
3
3
3
3
mm
70
70
73
73
CARBIDE TIPPED
mm
38.1
57.1
38.1
57.1
63.5
CARBIDE TIPPED
PART No.
ROUTER BITS
SOLID CARBIDE & CARBIDE TIPPED
C
mm
44.4
44.4
44.4
44.4
50.8
44.4
44.4
50.8
44.4
50.8
44.4
44.4
44.4
44.4
50.8
44.4
50.8
44.4
44.4
44.4
44.4
50.8
44.4
50.8
44.4
44.4
44.4
44.4
50.8
44.4
44.4
44.4
44.4
44.4
44.4
44.4
44.4
44.4
44.4
44.4
12.7 mm (1/2”) SHANK
PART No.
T 1409 M
T 1412
T 1410 M
T 1411 M
T 1414
T 1412 M
TX 1412 M
T 1416
TX 1416
T 1413 M
TX 1413 M
T 1414 M
T 1418
T 1415 M
T 1420
TX 1420
T 1416 M
TX 1416 M
T 1416.5 M
T 1417 M
T 1422
T 1418 M
TX 1418 M
T 1418.5 M
T 1419 M
TX 1419 M
T 1424
TX 1424
T 1419.5 M
T 1420 M
T 1426
T 1428
T 1425 M
T 1432
T 1436
T 1432 M
T 1435 M
T 1448
T 1452
T 1456
T 1460
T 1464
A
in.
23/64
3/8
25/64
7/16
7/16
15/32
15/32
1/2
1/2
33/64
33/64
35/64
9/16
19/32
5/8
5/8
5/8
5/8
21/32
43/64
11/16
45/64
45/64
3/4
3/4
3/4
3/4
49/64
13/16
7/8
63/64
1
1-1/8
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
B
mm
9
9.5
10
11
11.1
12
12
12.7
12.7
13
13
14
14.3
15
15.9
15.9
16
16
16.5
17
17.5
18
18
18.5
19
19
19
19
19.5
20
20.6
22.2
25
25.4
28.6
32
35
38.1
41.3
44.4
47.6
50.8
in.
1
1
1
1
1
1
1-1/4
1-1/4
2
1-1/4
2
1-1/4
1-1/4
1-1/2
1-1/2
2
1-1/2
2
1-1/2
1-1/2
1-1/2
1-1/2
2
1-1/2
1-1/2
2
1-1/2
2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
C
mm
70
70
70
70
70
70
76
76
95
76
95
76
76
82
82
95
82
95
82
82
82
82
95
82
82
95
82
95
82
82
82
82
82
82
76
76
76
76
76
76
76
76
STRAIGHT BIT
WITH DOWN
SHEAR
C
Reduces top edge breakout.
Ideal for veneered and
laminated boards.
SINGLE FLUTE
B
CARBIDE TIPPED
12.7 mm (1/2”) SHANK
PART No.
T 1410 MS
T 1413 MS
T 1416 MS
A
in.
25/64
33/64
5/8
B
mm
10
13
16
in.
1
1-1/2
1-1/2
A
C
mm
25.4
38.1
38.1
in.
2-5/8
3-5/32
3-5/32
mm
67
80.2
80.2
PART No.
TSH 1424
TSHX 1424
A
in.
3/4
3/4
B
mm
19
19
in.
1-1/2
1-61/64
C
mm
38.1
50
in.
3-1/4
3-23/37
mm
82
94.5
7
Premium
Quality
STRAIGHT BITS
END
VIEW
ROUTER BITS
END CUTTING
HINGE
MORTISE BITS
C
For plunge cutting deep or
repetitive holes in addition to
normal groove, trim and rebate
routing.
C
Can be used as a fast cutting
stair tread bit or making mortises
from edge of work.
B
CARBIDE TIPPED - TWO FLUTE
A
12.7 mm (1/2”) SHANK
PART No.
T 1410M E/C
T 1413M E/C
T 1416M E/C
T 1418M E/C
T 1419M E/C
T 1425M E/C
T 1432M E/C
A
in.
25/64
33/64
5/8
45/64
3/4
63/64
-
B
mm
10
13
16
18
19
25
32
B
TWO FLUTE
in.
1
1-1/4
1-1/2
1-1/2
1-1/2
1-1/2
1-1/4
C
mm
25.4
31.8
38.1
38.1
38.1
38.1
31.8
in.
2-3/4
3
3-1/4
3-1/4
3-1/4
3-1/4
3
A
6.35 mm (1/4”) SHANK
A
PART No.
mm
70
76
82
82
82
82
76
in.
B
mm
in.
mm
C
mm
H 2016
1/2
HIGH SPEED STEEL
12.7
13/32
10.3
50
T 2016
1/2
CARBIDE TIPPED
12.7
13/32
10.3
42
12.7 mm (1/2”) SHANK
RIP & SLOTTER BIT
A
PART No.
in.
A slotting and fast cutting roughing bit.
C
B
T 1622 1/2
T 1624 1/2
T 1626 1/2
T 1628 1/2
B
mm
in.
CARBIDE TIPPED
17.5
3/4
19
3/4
20.6
3/4
22.2
3/4
11/16
3/4
13/16
7/8
C
mm
in.
mm
19
19
19
19
2-1/2
2-1/2
2-1/2
2-1/2
63.5
63.5
63.5
63.5
A
6.35 mm (1/4”) SHANK
PART No.
T 803 - 509
A
in.
1/4
B
mm
6.35
in.
3/8
FOR SCHEER
ROUTERS
C
mm
9.5
in.
1-1/2
mm
38.1
C
SLOT MORTISE BITS
A long series bit for slot mortise joints.
Note: Due to the extreme length of these
bits they should be used in a table
mounted routing machine only.
These bits are not guaranteed
against breakage.
B
C
10 mm INTERNAL
THREAD
B
A
PART No.
in.
TWO FLUTE END CUTTING WITH CHIP BREAKER
12.7 mm (1/2”) SHANK
PART No.
TSM 1408 M
TSM 1409.5M
5/16
3/8
TSM 1413 M
33/64
B
mm
in.
C
mm
in.
mm
2-3/16
55
2-3/16
2-3/16
2-3/8
2-3/8
55
55
60
60
A
A
in.
A
B
C
mm
in.
mm
8
1-1/2
38.1
9.5
1-1/2
38.1
CARBIDE TIPPED
13
2
50.8
in.
mm
3-5/8
3-5/8
92
92
3-3/4
95
TFRNA 8
1/4
TFRNA 12
TFRNA 16
TFRNA 20
TFRNA 24
3/8
1/2
5/8
3/4
6.35
5/8
15.9
CARBIDE TIPPED
9.5
3/4
12.7
3/4
16
1-1/4
19
1-1/4
19
19
31.8
31.8
LOCK MORTISE CUTTERS
Standard bits have a 12/32 NEF
thread to suit the Stanley machine.
Bits marked UNF fit the Porter
Cable machine. Extension Arbors
(96mm Long) are available to suit
both NEF and UNF threads
TA 22 for NEF
TA 24 for UNF
NEW
(see page 36)
A
STAGGERED
TIP BITS
C
A fast cutting roughing bit
for heavy stock removal.
B
B
CARBIDE TIPPED
PART No.
•
8
TLM 10
TLM 12
TLM 12 UNF
TLM 13 UNF
TLM 14
TLM 14 UNF
TLM 16
TLM 16 UNF
A
in.
5/8
3/4
3/4
13/16
7/8
7/8
1
1
B
mm
15.9
19
19
20.6
22.2
22.2
25.4
25.4
A
12.7 mm (1/2”) SHANK
in.
3/4
3/4
.590
.590
1
.590
1
.590
mm
19
19
15
15
25.4
15
25.4
15
THREAD
12/32 NEF
12/32 NEF
1/4 UNF
1/4 UNF
12/32 NEF
1/4 UNF
12/32 NEF
1/4 UNF
PART No.
A
in.
TST 1409.5 M
3/8
TST 1413 M
TSTX 1413 M
33/64
33/64
B
mm
in.
C
mm
in.
mm
9.5
1-1/2
38.1
3-5/8
92
CARBIDE TIPPED
13
1-3/4
44.5
13
2-1/4
57.1
3-1/2
4
89
102
TRIM SAWS
SLOTTING CUTTER
ASSEMBLIES
For edge trimming of laminated sink tops.
C
B
SOLID CARBIDE CUTTER
TWELVE TEETH
6.35 mm (1/4”) SHANK
PART No.
CARBIDE TIPPED - WITH PILOT
A
6.35 mm (1/4”) SHANK
A
in.
Solid carbide cutters give great
rigidity for thin slotting cuts.
B
mm
in.
TA 900 1.2M
TA 900 1.6M
TA 900 1.2M
TA 900 1.6M
C
mm
in.
mm
2-3/8
65
2-3/8
63
A
in.
1-1/4
1-1/4
1-1/4
1-1/4
B
mm
31.8
31.8
31.8
31.8
in.
3/64
1/16
3/64
1/16
C
mm
1.2
1.6
1.2
1.6
in.
1-5/8
1-5/8
ARBOR
No.
mm
41
TA 11
41
TA 11
Cutter only
Cutter only
ROUTER BITS
FLUSH TRIMMING BITS
PART No
Premium
Quality
P I L O T PA N E L B I T S
SINGLE FLUTE CARBIDE TIPPED
T 1910
5/16
T 1910 2
5/16
8
13/16
20.6
TWO FLUTES CARBIDE TIPPED
8
13/16
20.6
SLOTTING
CUTTER
ASSEMBLIES
C
B
COMBINATION
FLUSH TRIMMING &
DRILLING BITS
SOLID CARBIDE CUTTER
TWELVE TEETH
with ball bearing Guide
9.4mm
6.35 mm (1/4”) SHANK
This bit drills its own hole for blind
routing in plywood and soft metals.
Eliminates fitting edges at window
and floor openings.
C
PART No.
TA 900 1.2MB
TA 900 1.6MB
B
A
in.
1-1/4
1-1/4
B
mm
31.8
31.8
in.
3/64
1/16
C
mm
1.2
1.6
in.
2-3/32
2-3/32
mm
53
53
A
ARBOR
No.
TA 10
TA 10
Replacement Ball Bearing TB11
WITH PILOT
SUFFIX 1/2 = 1/2” SHANK,
PART No
A
in.
B
mm
in.
KITS
A
C
mm
in.
mm
2-3/8
2-5/8
3-5/8
60
67
92
2-1/2
63.5
2-61/64
3-3/16
3-5/8
75
81
92
2-3/4
70
SINGLE FLUTE HIGH SPEED STEEL
H 1508
H 1512 3/8
H 1516 1/2
1/4
3/8
1/2
T 1508
1/4
6.35
9.5
12.7
3/4
7/8
1-1/8
19
22.2
28.6
SINGLE FLUTE SOLID CARBIDE
6.35
25/32
20
SINGLE FLUTE CARBIDE TIPPED
T 1510
T 1512 3/8
T 1516 1/2
5/16
3/8
1/2
T 1510 2
5/16
8
9.5
12.7
13/16
1
1
20.6
25.4
25.4
SIX BIT STARTER
ROUTER BIT SET
HIGH SPEED STEEL
PART No. H202-457
Set includes:
1-Router Bit Case
1-H112
1-H216
1-H416
1-H916
1-H508
1-H208
Supplied in handy Plastic Case.
Case sold separately
Part No. TCASE
TWO FLUTES CARBIDE TIPPED
8
13/16
20.6
THREE BIT LAMINATE
TRIM SET
This bit is used extensively
in the caravan repair and
manufacturing industries
for drilling and trimming
sheet aluminium.
C
B
SPIRAL DOWNCUT
HIGH SPEED STEEL - WITH PILOT
SUFFIX 3/8 = 3/8”SHANK,
OTHERWISE 1/4”
PART No
HSF 1508
HSF 1512 3/8
HSF 1516 1/2
A
A
in.
1/4
3/8
1/2
B
mm
6.35
9.5
12.7
CARBIDE TIPPED
PART No. TRBS-1
Set includes:
1-T 192.22 B
1-T 192.00 B
1-T 208 S
in.
3/4
25/32
1-3/4
C
mm
19
20
44.4
in.
2-3/4
3
4-1/2
mm
70
76
115
9
Premium
Quality
ROUTER BITS
L A M I N AT E T R I M B I T S & C U T T E R S
FLUSH TRIMMING BITS
A popular bit for fast smooth and accurate
trimming cuts for laminates and template work.
C
This bit has been specially designed for
template work in softer timbers. Where a
single bearing might create an indentation
on the timber, this bit has double the
surface area to ensure template surface is
not damaged.
C
B
B
WITH DOUBLE BALL BEARING GUIDE
WITH BALL BEARING GUIDE
OTHERWISE 1/4”
PART No.
T 8008 B
T 8012 B
TS 8012 B
TS 8016 B
T 8016 B
T 8016 B 1/2
TX 8016 B 1/2
TXX 8016 B 1/2
T 8020 B
T 8020 B 1/2
T 8028 B 1/2
TX 8028 B 1/2
A
A
in.
1/4
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
0.866
0.866
OTHERWISE 1/4”
B
mm
6.35
9.5
9.5
12.7
12.7
12.7
12.7
12.7
15.9
15.9
22
22
in.
1
1
1/2
5/8
1
1
1-1/2
2
1
1
1
1-1/2
C
mm
25.4
25.4
12.7
15.9
25.4
25.4
38.1
50.8
25.4
25.4
25.4
38.1
in.
2-3/8
2-5/8
1-57/64
2-1/4
2-1/2
3-1/8
3-3/8
3-7/8
2-5/8
3-1/8
3-3/8
3-3/4
Bearing
No.
TB 6
TB 9
TB 9
TB 11
TB 11
TB 11
TB 11
TB 11
TB 14
TB 14
TB 12
TB 12
mm
60
63.5
48
57.1
67
79
86
98
67
79
86
95
A
A
PART No.
in.
T 8012 BB
3/8
TS 8012 BB
3/8
TS 8016 BB
1/2
T 8016 BB
1/2
T 8016 BB 1/2
1/2
TX 8016 BB 1/2 1/2
TXX 8016 BB 1/2 1/2
T 8020 BB
5/8
T 8020 BB 1/2
5/8
T 8028 BB 1/2 0.866
TX 8028 BB 1/2 0.866
B
mm
9.5
9.5
12.7
12.7
12.7
12.7
12.7
15.9
15.9
22
22
in.
1
1/2
5/8
1
1
1-1/2
2
1
1
1
1-1/2
C
mm
25.4
12.7
15.9
25.4
25.4
38.1
50.8
25.4
25.4
25.4
38.1
in.
2-3/4
2-9/64
2-3/8
2-3/4
3-3/8
3-7/8
4-1/4
3
3-3/8
3-1/2
4-5/32
mm
70
54.5
60
70
86
98
108
76
86
89
105
Bearing
No.
TB 9
TB 9
TB 11
TB 11
TB 11
TB 11
TB 11
TB 14
TB 14
TB 12
TB 12
FLUSH TRIM BITS DUAL BEARING
Designed for trimming and template work.
The top, bottom or both
bearings can be used for a variety of
trimming applications.
Made with Polycrystalline Diamond (PCD)
Tips. PCD Tips keep a sharp cutting edge
many times longer than tungsten carbide
tips. These bits are excellent for extremely
hard laminates.
C
NEW
B
NEW
Suffix 1/2 = 1/2” shank
Otherwise 1/4” shank
A
A
PART No.
DIATR S 8012 B
DIATR S 8016 B
DIATR S 8016 B 1/2
in.
3/8
1/2
1/2
B
mm
9.5
12.7
12.7
in
1/2
5/8
5/8
C
mm
12.7
15.9
15.9
in
2-3/32
2-7/32
2-13/16
mm
53.2
56.4
71.4
Bearing
No.
TB9
TB11
TB11
FLUSH TRIM BIT
WITH DOWN
SHEAR
A
PART No.
T 8216 DB
T 8224 DB 1/2
in.
1/2
3/4
End Centre
Bearing Bearing
No.
No.
mm
in
mm
in
mm
12.7 1.0 25.4 2-3/4 69.9 TB 11 TB 7
19 1-1/2 38.1 4-11/64 105.9 TB 16 TB 4
B
C
INVERTED FLUSH
TRIMMING BITS
A handy bit for copy work where
the template is between the work
and the router.
CARBIDE TIPPED
For minimal chipping and
superior finish.
C
C
CARBIDE TIPPED - TWO FLUTES
B
OTHERWISE 1/4”
B
A
A
PART No.
TSH 8024 B 1/2
TSHX 8024 B 1/2
A
in.
3/4
3/4
B
mm
in.
19
1-1/2
19 1-61/64
PART No.
C
mm
38.1
50
in.
mm
3-39/64 91.7
4
101.6
Bearing
No.
TB 16
TB 16
OVERHANG
TRIMMING BIT
This bit will leave a 1/8” overhang in
order that the final flush trimming cut
is a light one for the smoothest
possible finish.
C
A
in.
T 8212 B
3/8
T 8216 B
1/2
T 8220 B
5/8
T 8224 B 1/2
3/4
TX 8224 B 1/2 3/4
T 8236 B 1/2 1-1/8
B
C
Bearing
No.
mm
in. mm
in.
mm
TB 2
9.5
3/4
19 2-11/64 55
TB 7
12.7 3/4
19 2-11/64 55
TB 14
15.9 3/4
19 2-11/64 55
19 1-1/2 38.1 3-5/8 92.1 TB 4
19
2
50.8 4-5/32 105.6 TB 4
TB 18
28.6 1-1/2 38
3-1/3
89
Retaining
Ring
Circlip
TZR 1
TZR 1
TZR 3
TZR 3
TZR 3
INVERTED FLUSH
TRIM BIT with
Down Shear
CARBIDE TIPPED
C
B
B
6.35 mm (1/4”) SHANK
Retaining Ring TZR 3
Replacement Ball Bearing TB8.
PART No.
TO 8012 B
10
A
A
in.
3/8
B
mm
9.5
in.
1
PART No.
C
mm
25.4
in.
2-3/4
mm
70
TSH 8224 B 1/2
TSHX 8224 B 1/2
A
A
in.
3/4
3/4
mm
19
19
B
in.
mm
1-1/2
38.1
1-61/64 50
C
Bearing
in.
mm
No.
3-39/64 91.7
TB 4
4
101.6
TB 4
Premium
Quality
Ideal for template work where a superior finish is required.
H IGH PERFORMANCE
PROFESSIONAL RANGE - 4
Flutes
SOLID CARBIDE
These tools produce a chatter-free trimmed
edge. At high feed rates they produce a superior
finish to any other tool. Assembly includes 4 flute
cutter, arbor (1/4” or 1/2” shank),
bearing, nut and washer.
UP CUT
DOWN CUT
A
in. mm
PART No
PART No
TSRW 12 BB 3/8
TSRW 16 BB 1/2
TXSRW 16 BB 1/2
TXXSRW 16 BB 1/2
TSLW 12 BB 3/8
TSLW 16 BB 1/2
TXSLW 16 BB 1/2
TXXSLW 16 BB 1/2
3/8
1/2
1/2
1/2
B
in. mm
9.5
1
12.7 1
12.7 1 1/2
12.7 2
25.4
25.4
38.1
50.8
C
in.
Bearing
No.
TB9
TB11
TB11
TB11
mm
3
76.2
3 5/8 92.1
4
101.6
4 1/2 114.3
6.35 mm (1/4”) SHANK
A
T 9122 B
T 9130 B
B
mm
19
22.2
in.
0.580
0.580
C
mm
14.7
14.7
in.
2-3/16
2-3/16
mm
55
55
BEVEL
30 0 BEVEL
TRIMMING BIT
B
2
C
3
A
CARBIDE TIPPED TWO FLUTES WITH
BALL BEARING
GUIDE
B
A
T 192.00 B
T 192.22 B
T 192.30 B
A
B
C
in.
mm
in.
mm
in.
mm
1/2
0.697
0.784
12.7
17.7
19.3
1/4
1/4
1/4
6.35
6.35
6.35
1-3/4
1-3/4
1-3/4
44.4
44.4
44.4
1
2
3
For extra smooth trimming. Assembly includes 3 flute
cutter, bearing, arbor, spacers and nut.
A
6.35 mm (1/4”) SHANK
TA 193.00 B
TA 193.22 B
Arbor No.
Flush
22
TA 9
TA 9
T 193.00
T 193.22
BEVEL
Flush
220
A
PART No.
BEVEL
T 194.00
T 194.15
T 194.25
T 194.45
Flush
150
250
450
A
in.
.866
1
1-1/8
1-3/8
mm
22
25.4
28.6
35
DOUBLE FLUSH AND
BEVEL TRIMMING
ASSEMBLIES
Bevel
C
B
B
CARBIDE TIPPED - FOUR FLUTES
PART No.
BEVEL Arbor No.
TDA 194.00 B
TDA 194.00 B 1/2
TDA 194.15 B
TDA 194.15 B 1/2
TDA 194.25 B
TDA 194.25 B 1/2
TDA 194.45 B
TDA 194.45 B 1/2
FLUSH
FLUSH
150
150
250
250
450
450
TA 13
TA 14
TA 13
TA 14
TA 13
TA 14
TA 13
TA 14
B
in.
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
C
mm
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
in.
3
3-1/4
3
3-1/4
3
3-1/4
3
3-1/4
mm
76
82
76
82
76
82
76
82
REPLACEMENT LEFT HAND
TRIMMING CUTTERS
C
in.
2-3/8
2-3/8
REPLACEMENT TRIMMING CUTTERS
PART No.
mm
63.5
63.5
63.5
63.5
63.5
63.5
63.5
63.5
FLUSH AND BEVEL TRIMMING
ASSEMBLIESSOLID CARBIDE - THREE
FLUTES WITH BALL BEARING GUIDE
BEVEL
TA 1
TA 3
TA 1
TA 3
TA 1
TA 3
TA 1
TA 3
in.
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
2-1/2
Item
PROFESSIONAL RANGE - 3 Flutes
PART No.
Flush
Flush
150
150
250
250
450
450
C
mm
6.35
6.35
6.35
6.35
6.35
6.35
6.35
6.35
A time saving bit that will trim both sides of the
board in one pass. Washers provided enable
cutters to be separated the correct distance to
suit thickness of board to be trimmed.
6.35 mm (1/4”) SHANK
PART No.
TA 194.00 B
TA 194.00 B 1/2
TA 194.15 B
TA 194.15 B 1/2
TA 194.25 B
TA 194.25 B 1/2
TA 194.45 B
TA 194.45 B 1/2
B
in.
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
8 mm (5/16”) BORE
22 BEVEL
TRIMMING BIT
C
BEVEL Arbor No.
REPLACEMENT TRIMMING CUTTERS
0
1
PART No.
For oversize Bearing use TB13
220
300
HANDYMAN RANGE - 2 Flutes
An effective
range of
trimming bits
ideal for
small routers.
22mm
A versatile bit with ball bearing guide. By
adjusting the depth this bit will either flush
trim or bevel trim.
in.
3/4
7/8
C
B
FLUSH AND BEVEL
TRIMMING ASSEMBLIES
COMBINATION FLUSH &
BEVEL TRIMMING BITS
PART No.
Bevel
ROUTER BITS
SPIRAL FLUTE BIT - WITH BEARING
mm
60
60
Replacement Ball
Bearing TB14
For oversize
Bearing use TB16
6.35 mm (1/4”) BORE
A
in.
5/8
7/8
mm
15.9
22.2
A
8 mm (5/16”) BORE
PART No.
T 194.15 LH
T 194.25 LH
T 194.45 LH
BEVEL
150
250
450
A
in.
1
1-1/8
1-3/8
mm
25.4
28.6
35
11
Premium
Quality
ROUTER BITS
COMBINATION
FLUSH TRIMMING
& DRILLING BIT
COMBINATION FLUSH
& 22˚ BEVEL
TRIMMING BITS
C
Drills through surface laminate
into pre-cut opening and trims
edge square in one operation.
B
CARBIDE TIPPED TWO FLUTES
A
6.35 mm (1/4”) SHANK
T 703-507
A
in.
1/4
B
mm
6.35
in.
5/8
6.35 mm (1/4”) SHANK
C
mm
16
in.
1-1/2
mm
38.1
C
A
B
in.
1/2
mm
12.7
in.
1-1/2
mm
38.1
mm
41
51
30˚ BEVEL
TRIMMING BITS
C
B
A
PART No.
C
B
in.
5/8
5/8
TBD 30
TBDX 30
Provides 7° bevel or 0° square
cut on the edge of plastic
laminated surfaces.
mm
15.9
15.9
in.
3/8
3/8
C
mm
9.5
9.5
in.
1
1-3/8
mm
25.4
35
EDGE BAND TRIM BITS
CARBIDE TIPPED
B
C
A
C
SOLID CARBIDE SINGLE FLUTE
B
R
6.35 mm (1/4”) SHANK
T 2614
in.
1-5/8
-
6.35 mm (1/4”) SHANK
C
COMBINATION
FLUSH & 7˚ BEVEL
TRIMMING BIT
PART No.
C
mm
11
19
A
mm
4.8
in.
7/16
3/4
A
6.35 mm (1/4”) SHANK
in.
3/16
mm
12
14.3
Provides a 30˚ bevel to trim
the edge of plastic laminated
surfaces.
B
WITH PILOT
B
in.
15/32
9/16
T 2622
TX 2622
Provides 7° bevel to trim the
edge of plastic laminated
surfaces. Built-in pilot
eliminates guide assembly.
T 403-501
A
PART No.
7˚ BEVEL
TRIMMING BIT
PART No.
B
A
SOLID CARBIDE SINGLE FLUTE WITH PILOT
PART No.
C
Provides a 22˚ or 0˚ straight cut
on the edge of plastic
laminated surfaces.
in.
1/4
B
mm
6.35
B
A
A
in.
3/8
C
mm
9.5
in.
1-1/2
A
mm
38.1
COMBINATION
FLUSH & 22˚ BEVEL
TRIMMING BITS
PART No.
B
TLE 24
TLE 24 LH
A
TEG
TLE
C
Provides 22° bevel or 0° square
cut on the edge of plastic
laminated surfaces.
A
in.
3/4
3/4
B
mm
19.0
19.0
in.
31/64
31/64
mm
12.3
12.3
C
in.
mm
1-45/64 43.3
1-45/64 43.3
R RADIUS
in.
mm
5/64
2.0
5/64
2.0
15˚ BEVEL
PART No.
TEG 15
TEG 15 LH
6.35 mm (1/4”) SHANK
PART No.
TBD 22
TBDX 22
A
in.
1/4
1/4
B
mm
6.35
6.35
in.
1/2
1/2
in.
1
1-1/2
mm
25.4
38.1
Makes square trim edge cuts.
Has integral pilot
C
B
SOLID CARBIDE SINGLE FLUTE WITH PILOT
T 303-500
in.
1/4
B
mm
6.35
in.
1/4
C
mm
13.0
13.0
in.
1-1/2
1-1/2
mm
38.1
38.1
GROOVE FORMING BITS
BROOKMAN
DOVETAIL BIT
A bit specially designed to
be used in the Brookman
dovetailing machine.
C
B
3/8” B.S.F.
EXTERNAL THREAD
A
C
mm
6.35
in.
1-1/2
mm
38.1
PART No.
T 100
12
in.
33/64
33/64
A
6.35 mm (1/4”) SHANK
PART No.
B
mm
32.0
32.0
C
mm
12.7
12.7
FLUSH TRIMMING BIT
A
A
in.
1-17/64
1-17/64
A
in.
.520
B
mm
13.2
in.
9/16
C
mm
14.3
in.
2-1/4
mm
57.1
Bevel
10˚
Premium
Quality
GROOVE FORMING BITS
DOVETAIL“LEIGH” BITS
For dovetail joint, drawer fronts,
etc. for the quality minded
To suit the ‘Leigh’ Dovetail Jig.
ROUTER BITS
DOVETAIL BITS
C
C
SUFFIX 1/2 =
1/2” SHANK,
OTHERWISE 1/4”
TWO FLUTE
SUFFIX 10mm = 10mm
SHANK, OTHERWISE 1/4”
B
A
A
PART No.
in.
B
mm
mm
9/32
9/16
9/16
7.1
14.3
14.3
T 1012
9/32
7.1
9.5
13.5
13.5
Bevel
C
in.
mm
Bevel
1-5/8
1-5/8
2
41
41
50.8
5˚
15˚
15˚
38.1
5˚
44.4
44.4
70
70
70
44.4
70
15˚
15˚
15˚
15˚
15˚
15˚
5˚
SOLID CARBIDE
9.5
1-1/2
1/2
9/16
9/16
9/16
9/16
19/32
3/4
12.7
14.3
14.3
14.3
14.3
15
19
13.5
13.5
13.5
13.5
13.5
12.7
26
1-3/4
1-3/4
2-3/4
2-3/4
2-3/4
1-3/4
2-3/4
PART No.
TL 70
TL 80
TL 90 1/2
TL 100 1/2
TL 120
TL 140
TL 150 1/2
TL 160 1/2
A
B
in.
3/8
1/2
11/16
13/16
1/2
5/16
7/16
1/2
mm
9.5
12.7
17.4
20.6
12.7
8
11.1
12.7
in.
1/2
13/16
1
1-1/4
1/2
1
1
1
A
C
mm
12.7
20.6
25.4
31.8
12.7
25.4
25.4
25.4
in.
2-3/8
2-3/4
2-7/8
3-1/8
2-3/8
2-7/8
3
3
Bevel
mm
60
70
73
79
60
73
76
76
8˚
8˚
8˚
8˚
14˚
0˚
0˚
0˚
DRAWER PULL BITS
CARBIDE TIPPED
T 1016
T 1018
T 1018 3/8
T 1018 10MM
T 1018 1/2
T 1019
T 1024 1/2
B
B
A
HIGH SPEED STEEL
H 1012
H 1018
H 1018 1/2
C
These bits will
produce a hidden
handle on drawers
and cupboard doors.
12.7mm (1/2”) SHANK
DOVETAIL “GIFKINS” BITS
To suit ‘Gifkins’
Dovetail Jig.
PART No.
A
in.
TDC 16 1/2 1-3/4
TDC 20 1/2
2
TDC 24 1/2 2-1/4
C
C
B
mm
44.4
50.8
57.1
in.
1/2
9/16
3/4
C
mm
12.7
14.3
19
in.
2-1/2
2-9/16
2-5/8
mm
63.5
65
67
R RADIUS
in.
mm
1/2 12.7
9/16 14.3
3/4
19
These bits produce a recessed
handle on drawers or cupboard
doors that is both decorative
and functional.
C
B
B
A
A
A
PART No.
B
C
in.
mm
in.
mm
in.
mm
3/8
9.5 33/64 13.0 2-1/2 63.5
5/8 15.9
22.0 2-5/16 84.0
3/8
9.5 33/64 13.0 2-31/64 63.0
1/2 12.7
22.0 3-5/16 84.0
.244 6.2 25/64 10
2-1/4 57.1
.433 11 25/64 10
2-1/4 57.1
TGAD 12
TGBD 16 1/2
TGAS 12
TGBS 16 1/2
TGHD 12 *
TGHS 12
Bevel
8˚
8˚
0˚
0˚
7˚
0˚
Retaining
Ring
TZR 4
TZR 3
TZR 4
TZR 3
TZR 4
TZR 4
* Solid Carbide
Replacement Ball Bearings
1/4 Shank - TB7, 1/2 Shank - TB4
T-CUT DOVETAIL BIT
This bit allows you to cut matching dovetail
joints to the precision and accuracy found in
fine furniture.
Suits T-CUT Dovetail Jig.
B
OTHERWISE 1/4”
PART No.
TDP 20
TDP 20 1/2
TDP 35 1/2
A
A
in.
1
1
1-1/4
B
mm
25.4
25.4
31.8
in.
.609
.609
.760
C
mm
15.5
15.5
19.3
in.
2
2-3/8
2-3/4
mm
50.8
60
70
DRIP SEAL GROOVER
These bits cut a 2.5mm wide & 8mm deep
grove for fitting drip, dust & smoke seals to
window frames.
A countersunk screw securing the cutter
allows for a flush cut.
NEW
6.35mm (1/4”) SHANK
PART No.
TB 19149
A
14.9
B
10
C
46
Retaining
Ring
TZR 1
PART No.
A
in.
mm
TDSG 44 B
1-47/64 44
TDSG 44 B 1/2 1-47/64 44
B
in
3/32
3/32
mm
2.5
2.5
C
in
2-51/64
2-51/64
mm
71
71
ARBOR
TA 25
TB 26
A
craftsman.18
13
Premium
Quality
ROUTER BITS
GROOVE FORMING BITS
HOOK SLOT BITS
T-SLOT CUTTERS
This bit will quickly drill and slot
a convenient screw, nail
or hook slot in the back of a
picture frame, hanging
shield, etc.
These bits allow you to make horizontal
T-slots when used in hanging brackets,
or creating wall display units, slatwall, etc.
C
B2
B1
CARBIDE TIPPED - SINGLE FLUTE
CARBIDE TIPPED
A1 - TWO FLUTES
A2 - SINGLE FLUTE
12.7mm (1/2”) SHANK
A1
A2
A1
A2
in. mm in. mm
THS 12
.355
9
3/16 4.8
THS 16
1/2 12.7 5/16
8
THS 16 1/2 1/2 12.7 5/16
8
PART No.
in.
1/8
1/8
1/8
B1
mm
3.2
3.2
3.2
in.
3/8
1/2
1/2
A1
A2
B1
B2
C
mm
in. mm in.
mm in. mm in.
mm
TSA 28 1/2 1-7/64 28 25/64 10 57/64 22.7 25/64 10 3-3/32 78.5
TSA 30 1/2 1-3/16 30 25/64 10 57/64 22.7 25/64 10 3-3/32 78.5
TSA 30.6 1/2 1-13/64 30.6 27/64 10.6 45/64 18 25/64 10 3-3/32 78.5
B2
C
mm in. mm
9.5 1-5/8 41
12.7 1-3/4 44.4
12.7 2-5/8 67
PART No.
in.
EDGE & FACE FORMING BITS
“V” GROOVE BITS
22.5˚ VEE
GROOVE BITS
60˚ VEE
GROOVE BITS
22.5 Degree included Angle Single Flute - Solid Carbide
This bit is specifically
designed for sign and
lettering work.
C
B
0.5mm Flat
A
PART No.
TV 2208
TV 2216 1/2
A
in.
1/4
1/2
B
mm
6.4
12.7
in.
37/64
1-13/64
60° INCLUDED ANGLE
CARBIDE TIPPED
- TWO FLUTES
C
mm
14.7
30.6
in.
2-1/4
3
mm
57.2
76.2
* These bits are not guaranteed against tip breakage due to thin section of carbide at the point
PART No.
T 6128
T 6128 1/2
30˚ VEE
GROOVE BITS
30 Degree included Angle
- Single Flute - Solid
Carbide
B
A
PART No.
TV 3008
TV 3016 1/2
in.
1/4
1/2
mm
6.4
12.7
in.
-
in.
-
C
mm
22.4
22.4
in.
2-1/4
2-3/4
mm
57.1
70
A versatile bit for decorative
vee grooves and chamfering.
Used for sign and lettering
work. Also mitre joints for
box fabrication.
0.5mm Flat
B
B
mm
25.4
25.4
90˚ VEE GROOVE BITS
C
A
A
in.
1
1
C
C
mm
10.9
22.8
in.
2-1/4
3
NEW
mm
57.2
76.2
B
A
90° INCLUDED ANGLE
TWO FLUTES
CARBIDE TIPPED
45º VEE GROOVE BITS
45 Degree included angle - Single Flute - Solid Carbide
PART No.
NEW
A
in.
B
mm
in.
C
mm
in.
mm
1-3/8
1-7/8
35
47
HIGH SPEED STEEL
H 112
H 128
17/32
1-15/64
13.5
31.3
3/8
7/8
9.5
22
CARBIDE TIPPED
•
PART No.
TV 4508
TV 4516 1/2
14
A
in.
1/4
1/2
B
mm
6.35
12.7
in
–
37/64
C
mm
7.0
14.7
in
2-1/4
3.0
mm
57.15
76.2
•
T 112
45/64
18
.365
9.2
1-3/4
T 112 W/F *
45/64
18
7
T 128
1-15/64
31.3
5/8
15.9
2
T 128 1/2
1-15/64
31.3
5/8
15.9
2-1/2
T 1230 1/2
1-9/16
39.7
25/32
20
3-3/8
T 1236 1/2
1-49/64
45
1-13/64
30.5
3-13/64
T 1240 1/2
2
50.8
1
25.4
3
* Ground with a flat, for use on aluminium composite materials.
44.4
42
50.8
63.5
86
81.5
76
Premium
Quality
CORE BOX BITS
For use in fluting flat surfaces
such as mantles and facades.
120 Degree Included
Angle – Two Flute –
Carbide Tipped
C
B
A
PART No.
A
B
C
in.
1-45/64
2-13/64
2-29/32
TWO FLUTE
SUFFIX 1/2 = 1/2”
A
PART No.
B
in.
mm
150º VEE GROOVE BITS
H 408
H 412
H 416
H 420
H 424
1/4
3/8
1/2
5/8
3/4
6.35
9.5
12.7
15.9
19
150 Degree Included Angle - Two Flute - Carbide
Tipped
T 408
1/4
TV 1232
TV 1232 1/2
TV 1264 1/2
in.
1
1
2
mm
25.4
25.4
50.8
in.
-
mm
7.5
7.5
14.7
mm
43.3
55.9
73.8
NEW
PART No.
TV 1532
TV 1532 1/2
TV 1564 1/2
A
in.
1
1
2
B
mm
25.4
25.4
50.8
in
21/64
21/64
0.058
C
mm
8.4
8.4
14.8
in
1-19/32
2.10
2-19/32
mm
40.4
53.4
65.8
C
mm
R RADIUS
in.
mm
in.
mm
1-1/4
1-1/4
1-1/4
1-3/8
1-3/8
31.8
31.8
31.8
35
35
1/8
3/16
1/4
5/16
3/8
3.2
4.8
6.35
8.0
9.5
SOLID CARBIDE
6.35
5/16
8
1-1/2
38.1
1/8
3.2
CARBIDE TIPPED
7.9
1/4
6.35
9.5
1/4
6.35
12.7 31/64 12.2
12.7 31/64 12.2
15.9
3/8
9.5
15.9
3/8
9.5
19
1/2
12.7
19
1/2
12.7
25.4
5/8
15.9
31.8
3/4
19
38
7/8
22.2
31.8
31.8
38.1
57.1
44.4
57.1
47
57.1
63.5
63.5
67
5/32
3/16
1/4
1/4
5/16
5/16
3/8
3/8
1/2
5/8
3/4
4.0
4.8
6.35
6.35
8.0
8.0
9.5
9.5
12.7
15.9
19.0
HIGH SPEED STEEL
T 410
T 412
T 416
T 416 1/2
T 420
T 420 1/2
T 424
T 424 1/2
T 432 1/2
T 440 1/2
T 448 1/2
in.
5/16
3/8
1/2
1/2
5/8
5/8
3/4
3/4
1
1-1/4
1-1/2
1/4
1/4
11/32
3/8
15/32
6.35
6.35
8.7
9.5
12
1-1/4
1-1/4
1-1/2
2-1/4
1-3/4
2-1/4
1-7/8
2-1/4
2-1/2
2-1/2
2-5/8
ROUTER BITS
120˚ VEE
GROOVE BITS
ROUND NOSE BITS
For decorative coves and veins.
PROVINCIAL DESIGN
VEINING BITS
NEW
For recess design veining in fine
cabinet surfaces.
Designed for template routing.
C
B
90° INCLUDED ANGLE
A
6.35 mm (1/4”) SHANK
PART No.
T 503-502
T 503-503
T 503-504
T 503-505
A
in.
3/32
1/8
3/16
1/4
B
mm
2.4
3.2
4.8
6.35
in.
1/4
1/4
1/4
3/8
C
mm
6.35
6.35
6.35
9.5
in.
1-1/2
1-1/2
1-1/2
1-1/2
mm
38.1
38.1
38.1
38.1
Carbide Tipped
Two Flute
PART No.
TRN 416 1/2
TRN 420 1/2
TRN 424 1/2
VEINING BITS
For grooving and scoring panel
designs in wood surfaces such
as cupboard doors.
C
A
in.
1/2
5/8
3/4
B
mm
12.7
15.9
19
in
1 1/4
1 1/4
1 1/2
C
mm
31.75
31.75
38.1
in
3.0
3.0
3.27
mm
76.7
76.7
83.1
R Radius
in
mm
1/4
6.35
5/16
8
3/8
9.5
BALL END BITS
For cutting a channel for ropes, cables or pipes.
We recommend cutting a straight groove prior to using the ball end bit
to ease the cutting pressure on the tool.
B
SINGLE FLUTE
6.35 mm (1/4”) SHANK
PART No.
H 302
H 304
H 307
T 302
T 303
T 304
T 305
T 306
T 307
A
A
in.
1/16
1/8
7/32
1/16
3/32
1/8
5/32
3/16
7/32
B
mm
in.
C
mm
HIGH SPEED STEEL
1.6
3/16
4.8
3.2
5/16
7.9
5.5
7/16
11.1
SOLID CARBIDE
1.6
3/16
2.4
3/16
3.2
5/16
4
5/16
4.8
7/16
5.5
7/16
4.8
4.8
7.9
7.9
11.1
11.1
in.
mm
1-5/8
1-5/8
1-5/8
41
41
41
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
1-1/2
38.1
38.1
38.1
38.1
38.1
38.1
NEW
R
Carbide Tipped
Two Flute
PART No.
TBE 416 1/2
TBE 420 1/2
TBE 424 1/2
A
in.
1/2
5/8
3/4
B
mm
12.7
15.9
19
in
7/16
9/16
11/16
C
mm
in
mm
11 2-13/64 56
14.2 2-21/64 59.2
17.5
2.46
62.5
R Radius
in
mm
1/4
6.35
5/16
8
3/8
9.5
15
Premium
Quality
ROUTER BITS
OGEE BITS
ROUNDED BOTTOM
HALF CORE
BOX BITS
C
Used for decorative plunge cutting,
grooving or edge
forming.
C
B
R1
A
R
B
R
CARBIDE
TIPPED TWO
FLUTES
A
A
PART No.
PART No.
THC 45 1/2
THC 75 1/2
A
in.
2-1/2
3
B
mm
63.5
76.2
in.
43/64
23/32
C
R RADIUS
mm
in.
mm
in.
mm
17.0 2-45/64 68.7
45.0
18.3 2-13/16 71.4 2-61/64 75.0
B
in.
TR 7506
.937
TR 7506-1/2 .937
TR 7509
1-1/4
TR 7509-1/2 1-1/4
mm
23.7
23.7
32
32
in.
.580
.580
.700
.700
C
mm
14.7
14.7
17.7
17.7
in.
1-7/8
2-1/2
1-7/8
2-1/2
R RADIUS
in.
mm
3/16
4.7
3/16
4.7
1/4
6.35
1/4
6.35
mm
47
63.5
47
63.5
OGEE BITS
Used for panel doors and
decorative edge moulds.
C
TWO FLUTES
C
OTHERWISE 1/4”
B
R2
R1
A
R
R
B
PART No.
A2
TRS 7506 1/2
TRS 7509 1/2
A1
PART No.
A1
mm
A2
mm
B
in.
C
mm
in.
20
30.5
4.8
4.8
5/8
7/8
15.9
22.2
1-3/4
1-7/8
B
C
R1 RADIUS R2 RADIUS
mm
in. mm
in.
mm
in. mm in. mm
25.4 19/32 15.1 2-25/64 60.7 5/16 7.9 3/16 4.8
33.5 23/32 18.3 2-25/64 61.0 5/16 7.9 3/8 9.5
R RADIUS
in.
mm
mm
HIGH SPEED STEEL
H 7506
H 7509
A
in.
1
-
44.4
47
3/16
9/32
4.8
7.1
1/16
1/16
1/8
1/8
3/16
3/16
1/4
1/4
1.6
1.6
3.2
3.2
4.8
4.8
6.35
6.35
OGEE BITS
WIDE FLAT BOTTOM
Designed for grooving panel doors
and decorative edge moulds.
C
CARBIDE TIPPED
T 7502
T 7502 1/2
T 7504
T 7504 1/2
T 7506
T 7506 1/2
T 7509
T 7509 1/2
9.9
9.9
16.2
16.2
23.8
23.8
31.2
31.2
3.6
3.6
3.6
3.6
4.8
4.8
4.8
4.8
3/8
3/8
1/2
1/2
5/8
5/8
45/64
45/64
9.5
9.5
12.7
12.7
15.9
15.9
18
18
1-7/8
2-1/2
1-7/8
2-1/2
1-7/8
2-1/2
1-7/8
2-1/2
47
63.5
47
63.5
47
63.5
47
63.5
R
12.7mm
A
PART No.
TW 7506
TW 7506 1/2
TW 7509
TW 7509 1/2
OGEE BITS FINE POINT
For Ogee grooves where a fine point is required.
Used extensively in router lathe work.
A
in.
1-1/4
1-1/4
1-1/2
1-1/2
B
mm
31.8
31.8
38.1
38.1
in.
5/8
5/8
3/4
3/4
C
mm
15.9
15.9
19
19
in.
1-7/8
2-1/2
2
2-1/2
R
R
1mm
Used for decorative edge
and face moulds.
C
A
TF 7506
TF 7506 1/2
TF 7509
TF 7509 1/2
16
A
B
mm
20.7
20.7
26.4
26.4
R RADIUS
in.
mm
3/16
4.8
3/16
4.8
1/4
6.35
1/4
6.35
PROVINCIAL BITS
with bearing
B
in.
.815
.815
1.040
1.040
mm
47
63.5
50.8
63.5
C
PART No.
B
R
in.
33/64
33/64
5/8
5/8
C
mm
13
13
15.9
15.9
in.
1-7/8
2-1/4
1-7/8
2-1/2
mm
47
57.1
47
63.5
R
R RADIUS
in.
mm
3/16 4.8
3/16 4.8
1/4 6.35
1/4 6.35
B
R
A
PART No.
TCRR 3 B
TCRR 5 B 1/2
A
in.
1-3/8
B
mm
22.0
35.0
in.
25/64
35/64
C
mm
in.
mm
10.0
2
50.8
14.0 2-45/64 68.7
Replacement Bearings 1/4 “-TB12, 1/2” -TB21
R RADIUS
in.
mm
1/8
3.2
5.0
Premium
Quality
Used for panel doors and
decorative edge moulds.
This bit produces a beading
on the surface of the material
coming to a fine point.
TC 6
TC 6 1/2
TC 10
TC 10 1/2
TC 12 1/2
TC 16 1/2
C
B
R
SUFFIX 1/2 = 1/2”
SHANK,
OTHERWISE 1/4”
PART No.
BEADING BITS
FINE POINT
C
ROUTER BITS
CLASSICAL BITS
R
B
R
1mm
A
A
in.
1/2
1/2
.760
.760
57/64
1-5/32
B
mm
12.7
12.7
19.2
19.2
22.6
29.2
in.
1/2
1/2
9/16
9/16
5/8
3/4
C
in.
1-3/4
2-1/2
1-3/4
2-5/16
2-1/2
2-1/2
mm
12.7
12.7
14.3
14.3
15.9
19
R RADIUS
in. mm
3/32 2.4
3/32 2.4
5/32
4
5/32
4
3/16 4.8
1/4 6.35
mm
44.4
63.5
44.4
58.6
63.5
63.5
A
PART No.
TBF 4
TBF 4 1/2
TBF 8
TBF 8 1/2
TRADITIONAL
CLASSICAL BITS
Used for panel doors and decorative edge moulds.
B
mm
7.4
7.4
13.7
13.7
in.
3/8
3/8
1/2
1/2
C
mm
9.5
9.5
12.7
12.7
in.
1-3/4
2-5/8
1-3/4
2-5/8
mm
44.4
67
44.4
67
R RADIUS
in.
mm
1/8
3.2
1/8
3.2
1/4 6.35
1/4 6.35
BEADING BITS WIDE
FLAT BOTTOM
C
A
in.
.290
.290
-
Specially designed for grooving panel
doors. This bit produces a beading
groove with a wide bottom.
B2
R
B1
C
A
B
R
A
in. mm
TTC 8
11/16 17.4
TTC 8 1/2 11/16 17.4
TTC 12
.925 23.5
TTC 12 1/2 .925 23.5
TTC 16 1/2 1.160 29.5
PART No.
B1
in.
mm
0.070 1.8
0.070 1.8
0.070 1.8
0.070 1.8
1/8
3.2
B2
in.
1/2
1/2
1/2
1/2
5/8
mm
12.7
12.7
12.7
12.7
16
C
in. mm
1-3/4 44.4
2-1/4 57.1
1-3/4 44.4
2-1/4 57.1
2-1/4 57.1
12.7mm
R RADIUS
in. mm
1/8 3.2
1/8 3.2
3/16 4.8
3/16 4.8
1/4 6.35
A
PART No.
TBW 4
TBW 4 1/2
TBW 8
TBW 8 1/2
TRADITIONAL
CLASSICAL BITS
with bearing
A
in.
3/4
3/4
1
1
B
mm
19
19
25.4
25.4
in.
7/16
7/16
3/4
3/4
C
mm
11.1
11.1
19
19
in.
1-3/4
2-1/4
2-3/8
2-3/8
mm
44.4
57.1
50.8
60
R RADIUS
in.
mm
1/8
3.2
1/8
3.2
1/4 6.35
1/4 6.35
C
DOUBLE BEADING BIT
WIDE FLAT BOTTOM
R2 B1
B2
R1
Specially designed for grooving panel doors.
Also produces a decorative edge beading.
C
A
PART No.
TTCR 4 B
TTCR 6 B 1/2
A
mm
22.0
35.0
B1
mm
12.7
14.3
B2
mm
4.8
4.8
C
mm
54
73.0
R1
mm
5.5
10.3
R2
mm
4
6.0
R B
R
12.7mm
A
Replacement Bearings 1/4 “-TB12, 1/2” -TB21
BEADING BITS
For grooving panel designs in wood surfaces
such as cupboard doors.
PART No.
C
CARBIDE TIPPED - TWO
FLUTES
SUFFIX 1/2 =
1/2” SHANK,
OTHERWISE 1/4”
B
R
3.2mm
A
PART No.
TBB 4
TBB 4 1/2
TBB 8
TBB 8 1/2
A
in.
3/8
3/8
5/8
5/8
B
mm
9.5
9.5
15.9
15.9
in.
3/8
3/8
1/2
1/2
C
mm
9.5
9.5
12.7
12.7
in.
1-3/4
2-1/4
1-3/4
2-1/4
mm
44.4
57.1
44.4
57.1
R RADIUS
in.
mm
1/8
3.2
1/8
3.2
1/4 6.35
1/4 6.35
TBD 4
TBD 4 1/2
TBD 8 1/2
A
in.
1
1
1-1/2
B
mm
25.4
25.4
38.1
in.
7/16
7/16
3/4
C
mm
11.1
11.1
19
in.
1-3/4
2-1/4
2-1/2
mm
44.4
57.1
63.5
R RADIUS
in.
mm
1/8
3.2
1/8
3.2
1/4 6.35
SPECIAL B I T S
Are made to any size or detail.
Please furnish a wood sample, drawing or
dimensioned sketch when ordering.
17
Premium
Quality
ROUTER BITS
EXTENDED ROUNDING OVER BITS
EXTENDED
DOUBLE
BEADING
BITS
This bit is used for rounding over edges
in areas where a ball bearing is
not required.
It makes a decorative edge, or can be
used to plunge completely through
the material.
C
R2
R1
B
A
R1 RADIUS R2 RADIUS
PART No.
in. mm in. mm
in.
mm in. mm in. mm
TBX 604 1/2
1
25.4 1-1/8 28.6 2-29/32 73.8 1/8 3.2 1/8 3.2
TBX 606 1/2 1-1/8 28.6 1-3/16 30.2
3
76.2 3/16 4.8 1/8 3.2
A
B
C
NO BEARING
PART No.
TX 506
TX 508
TX 508 1/2
TX 512 1/2
TX 516 1/2
TX 520 1/2
TX 524 1/2
A1
mm
20
25
25
33
39
45
51
A2
mm
10
13
13
13
13
13
13
B
mm
16
19
19
25
25
28.6
31.8
C
mm
53
59
72
79
84
82
90.8
R RADIUS
mm
5
6
6
10
13
16
19
24.7
32.7
38.7
12.7
12.7
12.7
19
25
25
71
74
80
6
10
13
EXTENDED
PROVINCIAL
BITS
C
R
B
R
WITH BEARING
TX 508 B 1/2
TX 512 B 1/2
TX 516 B 1/2
A
A
B
C
R1 RADIUS R2 RADIUS
in. mm
in.
mm
in. mm in. mm in. mm
TCRX 8 1/2
1
25.4 1-15/64 31.3
3
76.2 1/8 3.2 1/8 3.2
TCRX 12 1/2 1-1/8 28.6 1-19/64 32.9 3-7/64 79.0 3/16 4.8 1/8 3.2
PART No.
DISH CUT BITS
These bits are used for routing
trays, bowls, plates and boxes.
They have a wide surface cut, to
quickly remove excess material.
12.7 mm (1/2”)
SHANK
CARBIDE TIPPED TWO FLUTES WITH BEARING
12.7 mm (1/2”)
SHANK
C
C
B
B
R
R
A
A
A
mm
19
32
PART No.
TD 706 1/2
TD 716 1/2
B
mm
19
32
C
mm
64
77
R RADIUS
mm
4.75
6.5
PART No.
TD 706 B 1/2
TD 712 B 1/2
A
mm
19
28.6
B
mm
19
32
C
mm
76.8
89.9
R RADIUS
mm
4.75
6
BEARING
NO.
TB4
TB18
EDGE FORMING BITS
PALACE PATTERN
BITS
An attractive edge mould for
table and bench tops.
C
B1
FLUTE
WITH BALL BEARING
GUIDE
B2
12.7 mm (1/2”)
SHANK
PART No.
B1
PART No. TEB 11 B 1/2
C
in.
mm
in.
mm
in.
mm
TEB 09 B 1/2 1-1/4
31.8
1
25.4
9/32
7.1
3-1/8
79
TEB 10 B 1/2
31.8
1
25.4
3/8
9.5
3-1/8
79
TEB 11 B 1/2
1-5/16
33
1-9/32
32.5
0.590
15
3/8
86
TEB 12 B 1/2
1-9/32
32.5
1-9/32
32.5
3/4
19
3-1/4
82
18
B2
mm
1-1/4
A
A
in.
Premium
Quality
EDGE FORMING BITS
A decorative edge bit with pilot
for early American furniture
making.
C
Ideal for drop leaf table joints
and rounded edges.
R
E = 4.8mm (3/16”)
TWO FLUTE - WITH PILOT
A
in.
B
E
A
B
mm
B
in.
C
mm
in.
H 508
H 510
H 512
H 516
3/4
3/4
1
1-1/4
19
19
25.4
31.8
HIGH SPEED STEEL
1/2
12.7
1-7/8
1/2
12.7
1-7/8
5/8
15.9
2
13/16 20.6
2
T 506
T 508
T 510
T 512
T 516
9/16
11/16
13/16
15/16
1-3/16
14.2
17.5
20.6
23.8
30.1
CARBIDE TIPPED
1/2
12.7
1-3/4
9/16 14.3
1-7/8
9/16 14.3
1-7/8
5/8
15.9
2
13/16 20.6
2-1/4
Gives extra smooth chatter free cuts
due to precise tool geometry.
Can be converted to a beading bit by
using bearing TB 9.
6.35 mm (1/4”) SHANK
R RADIUS
in.
mm
mm
PART No.
47
47
50.8
50.8
1/4
5/16
3/8
1/2
6.35
7.9
9.5
12.7
44.4
47
47
50.8
57.1
3/16
1/4
5/16
3/8
1/2
4.8
6.35
7.9
9.5
12.7
A
in.
3/4
3/4
1
T 604
T 608
T 612
9/16
13/16
1-1/16
NEW
•
•
•
3.2
6.35
9.5
1/8
1/4
3/8
3.2
6.35
9.5
C
B
R
NEW
B
mm
in.
15.9 5/16
16.7 11/32
19
1/2
20.6 7/16
22.2 15/32
22.2 15/32
22.5 15/32
24.7 33/64
25.4
1/2
25.4
1/2
28.6
1/2
28.6
1/2
31.8
5/8
31.8
5/8
32.7 21/32
36.7 45/64
38.1
3/4
38.1
3/4
44.5
7/8
50.8
1
57.1 1-5/64
63.5 1-1/4
76.2 1-15/32
mm
7.9
8.7
12.7
11.1
12
12
12
13
12.7
12.7
12.7
12.7
15.9
15.9
16.5
18
19
19
22.2
25.4
27.4
31.8
37.3
C
in.
1-7/8
1 7/8
2
2
2
2-1/2
2
2-3/16
2
2-1/2
2
2-5/8
2-1/4
2-5/8
2-53/64
2-57/64
2-1/4
2-3/4
3-1/4
3-1/4
3-1/2
3-5/8
3-3/4
mm
47
47
50.8
50.8
50.8
63.5
50.8
55.5
50.8
63.5
50.8
67
57.1
67
72
73.5
57.1
70
82
82
89
92
95
R RADIUS
in.
mm
1/16
1.6
5/64
2
1/8
3.2
4
3/16
4.8
3/16
4.8
5
15/64
6
1/4
6.35
1/4
6.35
5/16
7.9
5/16
7.9
3/8
9.5
3/8
9.5
25/64 10
15/32 12
1/2
12.7
1/2
12.7
5/8
15.9
3/4
19
7/8
22.2
1
25.4
1-1/4 31.8
•
•
B
mm
in.
15.9 5/16
16.7 11/32
19
1/2
20.6 7/16
22.2 15/32
22.2 15/32
22.5 15/32
24.7 33/64
25.4
1/2
25.4
1/2
28.6
1/2
28.6
1/2
31.8
5/8
31.8
5/8
32.7 21/32
36.7 45/64
38.1
3/4
38.1
3/4
44.5
7/8
50.8
1
57.1 1-5/64
63.5 1-1/4
76.2 1-15/32
mm
7.9
8.7
12.7
11.1
12
12
12
13
12.7
12.7
12.7
12.7
15.9
15.9
16.5
18
19
19
22.2
25.4
27.4
31.8
37.3
C
in.
1-7/8
1-7/8
2
2
2
2-1/2
2
2-3/32
2
2-1/2
2
2-5/8
2-1/4
2-5/8
2-3/4
2-51/64
2-1/4
2-3/4
3-1/4
3-1/4
3-1/2
3-5/8
3-3/4
R RADIUS
in.
mm
1/16
1.6
5/64
2
1/8
3.2
4
3/16
4.8
3/16
4.8
5
15/64
6
1/4
6.35
1/4
6.35
5/16
7.9
5/16
7.9
3/8
9.5
3/8
9.5
25/64 10
15/32 12
1/2
12.7
1/2
12.7
5/8
15.9
3/4
19
7/8
22.2
1
25.4
1-1/4 31.8
mm
47
47
50.8
50.8
50.8
63.5
50.8
53.2
50.8
63.5
50.8
67
57.1
67
69.7
71.2
57.1
70
82
82
89
92
95
A decorative edge bead.
These bits are very popular for table
and bench tops. Profiles are variable
by raising or lowering the bit.
C
C
WITH BALL BEARING
GUIDE
B
12.7 mm (1/2”)
SHANK
B
C
in.
mm
in.
mm
in.
mm
BEARING
No.
2-1/4
2-1/4
2.80
2.80
57.1
57.1
71.1
71.1
15/16
15/16
15/16
15/16
23.8
23.8
23.8
23.8
3-1/4
3-1/4
3-1/4
3-1/4
82
82
82
82
TB11
TB9
TB11
TB9
B
OTHERWISE 1/4”
A
A
•
T 602 B
T 602 MB
T 604 B
T 604 MB
T 606 B
T 606 B 1/2
T 605 MB
T 606 MB
T 608 B
T 608 B 1/2
T 610 B
T 610 B 1/2
T 612 B
T 612 B 1/2
T 610 MB 1/2
T 612 MB 1/2
T 616 B
T 616 B 1/2
T 620 B 1/2
T 624 B 1/2
T 628 B 1/2
T 632 B 1/2
T 640 B 1/2
A
in.
5/8
21/32
3/4
13/16
7/8
7/8
7/8
31/32
1
1
1-1/8
1-1/8
1-1/4
1-1/4
1-9/32
1-7/16
1-1/2
1-1/2
1-3/4
2
2-1/4
2-1/2
3
A
DOUBLE
BEADING BITS
ROUND OVER FILLET BITS
TEB 01 B 1/2
TEB 02 B 1/2
TEB 03 B 1/2
TEB 04 B 1/2
1/8
1/4
3/8
OTHERWISE 1/4”
PART No.
R RADIUS
in.
mm
PART No.
T 502 B
T 502 MB
T 504 B
T 504 MB
T 506 B
T 506 B 1/2
T 505 MB
T 506 MB
T 508 B
T 508 B 1/2
T 510 B
T 510 B 1/2
T 512 B
T 512 B 1/2
T 510 MB 1/2
T 512 MB 1/2
T 516 B
T 516 B 1/2
T 520 B 1/2
T 524 B 1/2
T 528 B 1/2
T 532 B 1/2
T 540 B 1/2
B
C
in.
mm
in.
mm
HIGH SPEED STEEL
19
3/8
9.5 1-7/8
47
19
1/2
12.7 1-7/8
47
25
5/8
15.9
2
50.8
CARBIDE TIPPED
14.3
1/2
12.7 1-5/8
41
20.6
9/16
14.2 1-5/8
41
27
5/8
15.9
2
50.8
mm
H 604
H 608
H 612
OTHERWISE 1/4”
A
in.
5/8
21/32
3/4
13/16
7/8
7/8
7/8
31/32
1
1
1-1/8
1-1/8
1-1/4
1-1/4
1-9/32
1-7/16
1-1/2
1-1/2
1-3/4
2
2-1/4
2-1/2
3
E
A
This bit is the same as the rounding over
bit but has a smaller bearing leaving 1/16”
edge bead.
Can be converted to rounding over bit by
using bearing TB11.
PART No.
R
E = 4.8mm (3/16”)
6.35 mm (1/4”) SHANK
PART No.
C
ROUTER BITS
BEADING BITS
ROUNDING OVER
BITS
A
B
C
in.
mm in. mm in.
mm
TB 606 B
1-3/8 35 11/16 17.4 2-1/4 57.1
TB 606 B 1/2 1-3/8 35 11/16 17.4 2-3/4 70
TB 608 B 1/2 1-5/8 41
7/8 22.2 3-1/8 79
PART No.
R2
R1
A
R1 RADIUS R2 RADIUS
in. mm in. mm
3/16 4.8 1/4 6.35
3/16 4.8 1/4 6.35
1/4 6.35 5/16 7.9
19
Premium
Quality
ROUTER BITS
EDGE FORMING BITS
COVE BITS
DOUBLE
BEADING BITS
Used for a drop leaf table
joints and decorative edges.
C
OTHERWISE 1/4”
C
B
R2
B
R1
R
E = 4.8mm (3/16”)
A
A
PART No.
in.
TBR 608 B
1-1/4
TBR 608 B 1/2 1-1/4
TBR 616 B 1/2
2
B
C
mm in. mm in. mm
31.8 17/32 13.3
2 50.8
31.8 17/32 13.3 2-1/2 63.5
50.8 29/32 22.9 3-1/8 79.4
R1 RADIUS R2 RADIUS
in. mm in. mm
1/4 6.4 1/8 3.2
1/4 6.4 1/8 3.2
1/2 12.7 1/4 6.35
TRIPLE
BEADING BITS
E
A
6.35 mm (1/4”)
SHANK
A
PART No.
B
in.
H 708
H 712
H 716
11/16
1
1-1/4
T 706
T 708
T 712
T 716
9/16
11/16
15/16
1-3/16
mm
in.
C
mm
in.
HIGH SPEED STEEL
17.4
1/2
12.7
1-7/8
25
3/4
19
2
32 13/16 20.6
2
CARBIDE TIPPED
14.2
3/8
9.5
1-5/8
17.5 9/16
14.2
1-7/8
24
5/8
15.9
2
30 13/16 20.6
2
R RADIUS
in.
mm
mm
47
50.8
50.8
1/4
3/8
1/2
6.35
9.5
12.7
41
47
50.8
50.8
3/16
1/4
3/8
1/2
4.8
6.35
9.5
12.7
C
R1 B
R2
R1
12.7 mm (1/2”) SHANK
Up, sheer cutting angle
clears chips fast for chatter
free accurate routing.
C
A
A
B
C
R1 RADIUS R2 RADIUS
in.
mm in.
mm in. mm in. mm in. mm
TT 606 B 1/2 1-3/4 44.4 7/8 22.2 3-1/4 82 3/16 4.8 1/4 6.35
TT 608 B 1/2 2-1/8 54 1-1/16 27 3-1/4 82 1/4 6.35 5/16 7.9
PART No.
BEADING
OGEE BITS
C
R1
R2 B
R2
OTHERWISE 1/4”
A
A
B
C
R1 RADIUS R2 RADIUS
in. mm in. mm in. mm in. mm in. mm
TBO 30 B
1-1/8 28.6 21/32 16.5 2-1/4 57.1 7/64 2.75 1/4 6.35
TBO 30 B 1/2 1-1/8 28.6 21/32 16.5 2-5/8 67 7/64 2.75 1/4 6.35
TBO 35 B
1-3/8 35
7/8 22.2 2-1/2 63.5 3.15 5/16 8
TBO 35 B 1/2 1-3/8 35
7/8 22.2 3
76
3.15 5/16 8
TBO 50 B 1/2 1-7/8 47 1-5/16 33 3-3/8 86 3/16 4.75 1/2 12.7
PART No.
R
SUFFIX 1/2 =
1/2” SHANK,
OTHERWISE 1/4”
PART No.
Produces a decorative edge
moulding.
B
FLUTES WITH BALL
BEARING GUIDE
T 702 B
T 704 B
T 706 B
T 708 B
T 708 B 1/2
T 710 B
T 710 B 1/2
T 712 B
T 712 B 1/2
T 716 B
T 716 B 1/2
T 720 B 1/2
T 724 B 1/2
A
A
in.
5/8
3/4
7/8
1
1
1-1/8
1-1/8
1-1/4
1-1/4
1-1/2
1-1/2
1-3/4
2
B
mm
15.9
19
22.2
25.4
25.4
28.6
28.6
31.8
31.8
38.1
38.1
44.5
50.8
in.
5/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
7/8
7/8
C
mm
7.9
12.7
12.7
12.7
12.7
12.7
12.7
12.7
12.7
15.9
15.9
22.2
22.2
in.
2-3/32
2-3/32
2-3/32
2-3/32
2-1/2
2
2-5/8
2-3/32
2-5/8
2-1/4
2-3/4
3
3-1/4
R RADIUS
in.
mm
1/16
1.6
1/8
3.2
3/16
4.8
1/4
6.35
1/4
6.35
5/16
7.9
5/16
7.9
3/8
9.5
3/8
9.5
1/2
12.7
1/2
12.7
5/8
15.9
3/4
19
mm
53
53
53
53
63.5
50.8
67
53
67
57.1
70
76
82
CLASSICAL COVE BITS
A decorative edge moulding.
By fitting the optional TB11 ball bearing the
standard cove design can be achieved.
E D G E & D R AW
FACE BIT
B
C
WITH BALL BEARING
GUIDE
B
TEF 01 B 1/2
A
A
in.
2.6
B
mm
66
20
in.
45/64
C
mm
18
in.
3
mm
76
R
OTHERWISE 1/4”
PART No.
12.7mm (1/2”)
SHANK
PART No.
C
in.
TC 708 B
1-1/8
TC 708 B 1/2 1-1/8
TC 712 B
1-3/8
TC 712 B 1/2 1-3/8
TC 716 B 1/2 1-5/8
A
A
B
mm
28.6
28.6
35
35
41
in.
.530
.530
.670
.670
-
mm
13.5
13.5
17
17
22
C
in.
2-1/4
2-1/2
2-1/4
2-3/4
3-9/32
mm
57.1
63.5
57.1
70
83.2
R RADIUS
in.
mm
1/4
6.35
1/4
6.35
3/8
9.5
3/8
9.5
1/2
12.7
Premium
Quality
EDGE FORMING BITS
CLASSICAL BITS
Produces a decorative edge moulding.
By fitting the optional TB11 ball bearing
a cove effect can be achieved.
This versatile bit produces a
very decorative moulding used
extensively on many furniture
and building applications.
C
B
R2
R1
PART No.
TDC706B
TDC706B 1/2
TDC708B 1/2
in.
B
mm
RB
R
A
OTHERWISE 1/4”
A
C
in.
1-1/2 38.1 3/4
1-1/2 38.1 3/4
1-3/4 44.4 7/8
C
mm
in.
R1 RADIUS R2 RADIUS
mm in. mm in. mm
A
19 2-1/4 57.1 3/16 4.8 1/4 6.35
19 2-3/4 70 3/16 4.8 1/4 6.35
22.2 3
76 1/4 6.35 5/16 7.9
A
PART No.
in.
TC 8 B
1-1/8
TC 8 B 1/2 1-1/8
B
mm
28.6
28.6
in.
1/2
1/2
C
mm
12.7
12.7
in.
2
2-1/2
mm
50.8
63.5
R RADIUS
in.
mm
1/8
3.2
1/8
3.2
ROUTER BITS
DOUBLE COVE BITS
ACTUAL SIZE
TRIPLE COVE
BITS
Produces a decorative edge
moulding or any combination
of the three radii can be used.
By fitting the optional TB11 ball
bearing a different profile can
be achieved.
C
R1
B
R2
R1
TB9 BEARING FITTED
A
12.7mm (1/2”) SHANK
PART No. TC 12 B 1/2
TB11 BEARING FITTED
A
PART No.
A
B
C
R1 RADIUS R2 RADIUS
TTC 706B 1/2 1-7/8 47
1 25.4 3-1/4 82 3/16 4.8 1/4 6.35
TTC 708B 1/2 2-1/4 57.1 1-1/8 28.6 3-3/8 86 1/4 6.35 5/16 7.9
PART No.
in.
TC 12 B
1-3/8
TC 12 B 1/2 1-3/8
B
mm
35
35
in.
5/8
5/8
C
mm
15.9
15.9
in.
2-1/4
2-3/4
mm
57.1
70
R RADIUS
in.
mm
3/16
4.8
3/16
4.8
ACTUAL SIZE
PROVINCIAL BITS
Like so many of Carb-I-Tool’s router bits
this bit can be used as illustrated to
produce decorative edge mouldings
or by using the guide on your machine
many combinations of rounds and
covers can be achieved.
C
R
R
B
A
A
in.
TCR 8 B
1
TCR 8 B 1/2 1
TCR 12 B
1-1/4
TCR 12 B 1/2 1-1/4
TCR 16 B 1/2 1-1/2
B
PART No.
mm
25.4
25.4
31.8
31.8
38.1
in.
0.460
0.460
.560
.560
0.710
TC 16 B 1/2
C
mm
11.7
11.7
14.2
14.2
18
in.
2
2-5/8
2-1/4
2-5/8
2-3/4
mm
50.8
67
57.1
67
70
R RADIUS
in.
mm
1/8
3.2
1/8
3.2
3/16
4.8
3/16
4.8
1/4
6.35
C
B
A
in.
TCRA 16 B
1 1/4
TCRA 16 B 1/2 1 1/4
TCRA 32 B 1/2 2
A
B
C
mm in. mm in. mm
31.8 19/32 15.0 2-1/4 57.2
31.8 19/32 15.0 2-5/8 66.7
50.8 15/16 23.8 3-1/4 82.6
R1 RADIUS
in. mm
1/4 6.4
1/4 6.4
1/2 12.7
R2 RADIUS
in. mm
1/8 3.2
1/8 3.2
1/4 6.35
A
in.
15/8
B
mm
41
in.
-
C
mm
22
in.
3-9/32
mm
83.2
R RADIUS
in.
mm
1/4
6.35
TRADITIONAL
CLASSICAL BITS
This bit produces a traditional
style furniture moulding.
CARBIDE TIPPED TWO FLUTE
A
in. mm
TTC 8 B
1 25.4
TTC 8 B 1/2
1 25.4
TTC 12 B
1-1/4 31.8
TTC 12 B 1/2 1-1/4 31.8
TTC 16 B
1-1/2 38.1
TTC 16 B 1/2 1-1/2 38.1
PART No.
PART No.
TB9 BEARING FITTED
12.7 mm (1/2”) SHANK
PART No.
PART No. TC 16 B 1/2
TB11 BEARING FITTED
B1
in. mm
7/16 11.1
7/16 11.1
7/16 11.1
7/16 11.1
9/16 14.3
9/16 14.3
B2
C
Radius mm
in. mm
in.
mm R1 R2
5/64 2
2-1/8 54 3.2
2
5/64 2
2-1/2 63.5 3.2
2
5/64 2
2-1/8 54 4.8 3.5
5/64 2 2-9/16 65 4.8 3.5
1/8 3.2 2-1/4 57.1 6.35 6.35
1/8 3.2 2-3/4 70 6.35 6.35
21
Premium
Quality
ROUTER BITS
EDGE FORMING BITS
CHAMFERING
BITS
REBATING BITS
Pilot equipped bits do not
require a guide when making
rebating cuts.
Helpful in making almost
invisible joints.
E = 4.8mm (3/16”)
TWO FLUTES - WITH PILOT
6.35 mm (1/4”)
SHANK
E = 4.8mm (3/16”)
TWO FLUTES - WITH PILOT
6.35 mm (1/4”) SHANK
450 CHAMFER
PART No.
A
in.
B
mm
in.
C
mm
PART No.
in.
mm
1-7/8
47
1.94
49.5
HIGH SPEED STEEL
H 916
1
T 916
1-3/16
25.4
5/8
15.9
CARBIDE TIPPED
30.2
45/64
18.0
A popular method of
removing sharp corners
for a professional finish.
H 1708
H 1712
11/16
15/16
T 1708
T 1712
11/16
15/16
B
C
mm
in.
mm
in.
mm
HIGH SPEED STEEL
17.5 7/16 11.1 1-7/8
47
23.8
1/2
12.7
2
50.8
CARBIDE TIPPED
17.5
23.8
7/16
1/2
11.1
12.7
2
2
D Depth
in.
mm
1/4
3/8
6.35
9.5
50.8
50.8
1/4
3/8
6.35
9.5
mm
50.8
63
57
63
76.2
65
65
D Depth
in.
mm
1/4 6.35
1/4 6.35
3/8
9.5
3/8
9.5
3/8
9.5
1/2 12.7
5/8 15.9
Has ball bearing guide for
mar-free finish. Replacement
bearing TB-11. By substituting
TB-9 bearing the depth of
rebate will be increased by
1/16” (1.6mm.)
FLUTES WITH BALL
BEARING GUIDE
SUFFIX 1/2 = 1/2”
SHANK,
OTHERWISE 1/4”
OTHERWISE 1/4”
PART No.
PART No.
A
in.
A
in.
T 8105 B 1/2
47/64
T 8110 B 1/2
63/64
T 8122 B
T 8122 B 1/2
TX 8122 B 1/2
1
1
1.42
T 8130 B
T 8130 B 1/2
1-1/8
1-1/8
T 916 B
T 916 B 1/2
T 920 B 1/2
T 924 B 1/2
1-3/8
1-3/8
1-7/8
2-1/4
T 8165 B
T 8165 B 1/2
TX 8165 B 1/2
1.58
1.58
2.95
T 8180 B
T 8180 B 1/2
TX 8180 B 1/2
1.58
1.58
2.95
B1
B2
C
T 1708 B
T 1708 B 1/2
T 1712 B
T 1712 B 1/2
TX 1712 B 1/2
T 1716 B 1/2
T 1720 B 1/2
mm
in.
mm
in.
mm
in.
mm
CHAMFER FROM VERTICAL
18.5 1 27/64 36.1
36
3 5/8 92.1
24.9 1 7/16 36.5
36
3 5/8 92.1
25.4 21/32 16.5 39/64 15.5 2-1/4 57.1
25.4 21/32 16.5 39/64 15.5 2-3/4
70
36
1-1/4
32
28.4 3-1/4
82
28.6 43/64 17
35/64 13.9 2-1/4 57.1
28.6 43/64 17
35/64 13.9 2-3/4
70
35
5/8
15.9 29/64 11.4 2-1/4 57.1
35
5/8
15.9 29/64 11.4 2-3/4
70
47.6
1
25.4 11/16 17.5 2-3/4
70
57.1 1-1/4 31.8
22.5 3-1/4
82
40
5/8
15.9
1/4
6.35 2-3/32 53
40
5/8
15.9
1/4
6.35 2-1/2 63.5
75
1-3/8
35
14.5 2-3/4
70
40
9/16 14.3 3/32
2.4 2-1/4 50.8
40
9/16 14.3 3/32
2.4 2-1/2 63.5
75
1-1/4
32
7/32
5.5 2-9/16 65
A
in.
1
1
1-1/4
1-1/4
1-1/4
1-1/2
1-3/4
B
mm
25.4
25.4
31.7
31.7
31.7
38.1
44.5
in.
1/2
1/2
1/2
1/2
1
1/2
1/2
mm
12.7
12.7
12.7
12.7
25.4
12.7
12.7
C
in.
2
2-1/2
2-1/4
2-1/2
3
2-9/16
2-9/16
SHIELDED BEARINGS
These bearings can be fitted to the Rebating Bits to give a range of cut depths.
PART No.
TBS 1
TBS 2
TBS 3
TBS 4
TBS 5
TBS 6
TBS 7
TBS 8
TBS 9
OD
in.
3/4
7/8
1
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
1 3/4
ID
mm
19.0
22.2
25.4
28.6
31.8
34.9
38.1
41.3
44.5
in.
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
B
mm
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
in.
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
mm
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
4.8
For the Complete range of bearings
INVERTED
CHAMFERING BIT
CHAMFERING BIT
WITH RADIUS
Used for chamfering the bottom
of boards.
C
B1
45Û
B2
TWO FLUTES - CARBIDE
TIPPED
12.7 mm (1/2”)
SHANK
A
PART No.
TI 916 B 1/2
in.
1 3/4
B1
mm
44.5
Replacement Ball Bearing TBS9.
22
PART No.
A
in.
-
B2
mm
22.5
in.
5/8
C
mm
15.9
in.
3
mm
76.3
in.
TRR 10 B 1/2 1.57
TRR 16 B 1/2 2.4
A
B
mm
40
60.9
in.
.458
.530
C
mm
11.6
13.5
in.
2-1/2
2-9/16
mm
63.5
65
R RADIUS
in.
mm
.156
3.9
.156
3.9
Premium
Quality
EDGE FORMING BITS
STAIR HANDRAIL BIT
C
A time saving bit for rounding over
both sides of a board in one pass.
B2 B1
OTHERWISE 1/4”
ROUTER BITS
BULL NOSE
RADIUS BITS
This bit will produce an attractive
and functional hand rail
for balustrades. It can be
used in conjunction with
the half bull nose bit to
curve the top over.
This will produce an
optional profile.
A
WITH BEARING
A
PART No.
in.
TBN 2 B
25/32
TBN 2 B 1/2
25/32
TBN 4.5 MB 1/2 51/64
TBN 5 MB 1/2
53/64
TBN 3 B
27/32
TBN 3 B 1/2
27/32
TBN 4 B
29/32
TBN 4 B 1/2
29/32
TBN 6 B
1-1/32
TBN 6 B 1/2
1-1/32
TBN 8 B 1/2
1-5/32
TBN 10 B 1/2
1-9/32
TBN 12 B 1/2
1-13/32
TBN 15 B 1/2
1-21/32
TBN 32 MB 1/2 1-57/64
B1
B2
mm
in.
mm
in.
mm
19.8
1/2
12.7
5/32
4
19.8
1/2
12.7
5/32
4
20.4
1/2
12.7 11/64 4.5
20.9
1/2
12.7 13/64
5
21.4
1/2
12.7
7/32
5.5
21.4
1/2
12.7
7/32
5.5
23
3/4
19
9/32
7.1
23
3/4
19
9/32
7.1
26.2
3/4
19
13/32 10.3
26.2
3/4
19
13/32 10.3
29.4
1
25.4 17/32 13.5
32.6 1-3/32 27.8 21/32 16.7
35.8 1-1/4 31.8 25/32 19.8
42
1-1/2 38.1 1-1/32 26.2
48 1-39/64 40.6 1-17/64 32
C
in.
2
2-1/2
2-1/2
2-1/2
2
2-1/2
2-3/8
2-3/4
2-3/8
2-3/4
3
3-1/4
3-1/4
3-5/8
3-7/8
mm
50.8
63.5
63.5
63.5
50.8
63.5
60
70
60
70
76
82
82
92
98.4
OPTIONAL
TBN 4 1/2
12.7 mm (1/2”) SHANK
PART No.
THR 50 B 1/2
29/32
23
3/4
19
9/32
7.1
2 33/64
TCO 1 B 1/2
TBN 4 B 1/2
C
B
in.
2-1/4
C
mm
57.1
in.
4.5
mm
116
A
B
mm
22.6
22.6
in.
9/32
9/32
Profile on top of rail can be varied using
a half bull nose bit
(See diagrams on
THR 50 B-1/2).
FLUTES WITH BALL
BEARING GUIDE
12.7 mm (1/2”)
SHANK
A
TCO 1 B
TCO 1 B 1/2
B
mm
50.8
64
Use TBN 4 B or
TBN 4 B 1/2 (see
above) for
matching cutter.
in.
57/64
57/64
A
in.
2
STAIR HANDRAIL BIT
CANOE SLAT
BITS
PART No.
PROFILE
Use THBN 75 B 1/2 for curved top
WITHOUT BEARING
OPTIONAL
PROFILE
C
mm
7.1
7.1
in.
1 3/4
2 3/8
mm
44.5
60.3
PART No.
THR 40 B 1/2
THR 60 B 1/2
A
in.
2-5/16
2-1/8
B
mm
58.7
54
in.
2
C
mm
38.7
50.8
in.
3-13/16
4.3
mm
96.8
110
DRAWING LINE BITS
A popular mould. Common on old
style double hung windows, and
architraves.
C
B2 B1
HALF BULL NOSE
RADIUS BITS
A handy bit for finishing wider
timbers. The adjustment of
machine height gives a variety
of different forms.
PART No.
TDL 3 B
TDL 3 B 1/2
TDL 4 B
TDL 4 B 1/2
TDL 6 B
TDL 6 B 1/2
A
in.
.850
.850
.910
.910
1.035
1.035
mm
21.6
21.6
23.1
23.1
26.3
26.3
R
A
OTHERWISE 1/4”
B1
in.
mm
7/16 11.1
7/16 11.1
19/32
15
19/32
15
11/16 17.5
11/16 17.5
B2
C
in.
mm
in.
mm
7/32
5.5
2
50.8
7/32
5.5
2-1/2 63.5
9/32
7.1 2-3/32 53
9/32
7.1
2-3/4
70
13/32 10.3 2-1/4 57.1
13/32 10.3 2-3/4
70
C
B1 B2
12.7 mm (1/2”) SHANK
A
A
B1
B2
C
R RADIUS
in.
mm in. mm
in. mm in. mm
mm
THBN 45 B 1/2
1
25.4 1.18 30 1.41 36 3-5/8 92
45
THBN 60 B 1/2 1-1/16 27
42.3 1-13/16 46 4-3/32 104
60
THBN 75 B 1/2 1-1/8 28.6 2
50.8 2-1/4 57.1 4-3/8 111.5
75
PART No.
23
Premium
Quality
ROUTER BITS
EDGE FORMING BITS
ROMAN OGEE BITS
OGEE BITS
A decorative edge bit for early
American furniture making.
C
R
R
6.35 mm (1/4”)
SHANK
A
A
PART No.
B
B
in.
mm
H 5705
H 5708
3/4
1-1/4
19
31.8
T 5705
T 5708
3/4
1-1/4
19
31.8
in.
C
mm
in.
R RADIUS
in.
mm
mm
These bits produce a
decorative form used
widely on table and
mantle edges. By
fitting the optional
TB9 ball bearing a
1/16” edge bead can
be produced as
illustrated.
C
B
R
R
A
HIGH SPEED STEEL
1/2
12.7
1-7/8
3/4
19
2
CARBIDE TIPPED
1/2
12.7 1-7/8
3/4
19
2
47
50.8
5/32
1/4
4
6.35
47
50.8
5/32
1/4
4
6.35
A
PART No.
in.
T 7506 B
1-3/8
T 7506 B 1/2 1-3/8
B
mm
34.9
34.9
in.
0.650
0.650
C
mm
in.
mm
16.5 2-5/16 58.7
16.5 2-25/32 70.7
R RADIUS
in.
mm
3/16
4.8
3/16
4.8
ACTUAL SIZE
C
WITH BALL BEARING
GUIDE
R
SUFFIX 1/2 = 1/2”
SHANK,
OTHERWISE 1/4”
in.
T 5705 B
1-1/8
T 5705 B 1/2 1-1/8
PART No. T7508 B1/2
TB11 BEARING FITTED
TB9 BEARING FITTED
A
A
PART No.
A
PART No.
B
R
B
mm
28.6
28.6
in.
1/2
1/2
C
mm
12.7
12.7
in.
2
2-5/8
R RADIUS
in.
mm
5/32
4
5/32
4
mm
50.8
67
in.
T 7508 B
1-5/8
T 7508 B 1/2 1-5/8
B
mm
41
41
in.
3/4
3/4
C
mm
19
19
in.
2-1/4
2-3/4
mm
57.1
70
R RADIUS
in.
mm
1/4
6.35
1/4
6.35
ACTUAL SIZE
PART No. T 5705 B1/2
PART No. T7512 B1/2
TB11 BEARING FITTED
PART No. T 5708 B1/2
TB9 BEARING FITTED
12.7 mm (1/2”) SHANK
PART No.
A
in.
T 5708 B
1-1/2
T 5708 B 1/2 1-1/2
T 5712 B 1/2
2
B
mm
38.1
38.1
50.8
in.
3/4
3/4
1
C
mm
19
19
25.4
in.
2-3/8
2-3/4
3-3/8
R RADIUS
in.
mm
1/4
6.35
1/4
6.35
3/8
9.5
mm
60
70
86
PART No.
T 7512 B 1/2
A
in.
2-1/8
B
mm
54
in.
1
C
mm
25.4
in.
3-3/8
mm
86
R RADIUS
in.
mm
3/8
9.5
SHALLOW
ROMAN
OGEE BITS
DOUBLE OGEE BITS
This bit will produce
a decorative edge
moulding.
C
C
R
OTHERWISE 1/4”
PART No.
TDO 8 B
TDO 8 B 1/2
TDO 12 B 1/2
TDO 16 B 1/2
A
in.
1-1/4
1-1/4
1-5/8
2
in.
.575
.575
.763
.950
24
A
B
mm
31.8
31.8
41
50.8
R B
R
C
mm
14.6
14.6
19.4
24.1
in.
2-3/16
2-5/8
2-3/4
3
mm
55
67
70
76
WITH BALL BEARING
GUIDE
R
B1
R B2
A
R RADIUS
in.
mm
1/8
3.2
1/8
3.2
3/16
4.8
1/4
6.35
A
B1
B2
C
R RADIUS
in. mm in. mm in. mm in. mm
mm
TS 5705 B
1-1/4 32
3/8 9.5 5/32 4
2 50.8
4
TS 5705 B 1/2 1-1/4 32
3/8 9.5 5/32 4 2-3/8 60
4
TS 5708 B 1/2 1-5/8 41 7/16 11.1 1/4 6.35 2-1/2 63.5
6.3
TS 5712 B 1/2
2
50.8 9/16 14.3 3/8 9.5 2-5/8 67
9.5
PART No.
Premium
Quality
EDGE FORMING BITS
A bit to enable production of batten
moulding for the fixing of cement
sheeting and other types of wall
panelling.
DOUBLE EDGE
RADIUS BIT
C
This versatile assembly enables you
to round the top and bottom edges
of timber at the same time.
Assembly comes with bearing,
spacer and washers, which allow
you to cut up to 30mm material.
B2 B1
12.7 mm (1/2”) SHANK
B1
in.
TBM 33 B 1/2 1-1/8
mm
28.6
in.
1.3
B2
mm
33
in.
7/8
12.7 mm (1/2”) SHANK
C
mm
22.2
in.
3-5/8
mm
92
PART No.
TDA 194-3 MB 1/2
TDA 194-5 MB 1/2
TDA 194-8 MB 1/2
TABLE EDGE BIT
A popular bit for finishing
table edges.
C
R1
12.7 mm (1/2”)
SHANK
PART No.
TEB 14B 1/2
R2
T 194-3 M RH
T 194-3 M LH
T 194-5 M RH
T 194-5 M LH
T 194-8 M RH
T 194-8 M LH
B
TABLE EDGE BIT
WITH RETURN
R1
12.7 mm (1/2”) SHANK
in.
2
2
C
mm
97.8
97.8
97.8
R RADIUS
mm
3
5
8
Cutter only
Cutter only
Cutter only
Cutter only
Cutter only
Cutter only
–
–
–
–
–
–
Top
Bottom
Top
Bottom
Top
Bottom
3
3
5
5
8
8
Spaces between cutters
nil (no Brg.)
Brg. + 2 Washers
Brg. + 5 Washers
Brg. + Spacer
Brg. + Spacer & 5 Washers
C
TEB 15 B 1/2
TEB 16 B 1/2
B
mm
15-32
19-36
25-39
Replacement Arbor TA 20.
This bit has a return to round over
bottom of table for an attractive finish.
A
28
28
32
32
38
38
Wood Thickness
10
19
22
25
30
B
C
R1 RADIUS R2 RADIUS
mm in. mm in. mm
mm
mm
50.8 0.720 18.3 3-1/8 79
8
16
PART No.
A
mm
28
32
38
A
CUTTER ONLY
A
A
in.
2
R
R B
A
A
PART No.
C
ROUTER BITS
BATTEN MOULD BIT
SPECIAL B I T S
R2 B
A
B
Are made to any size or detail.
Please furnish a wood sample, drawing or
dimensioned sketch when ordering.
C
R1 RADIUS R2 RADIUS
mm in. mm in. mm
mm
mm
50.8 1 5/16 33.5 - 94.7
6.35
16
8
16
50.8
36.7 3-27/32 97.6
REED BITS
TRS 3 B 1/2
TRD 3 B 1/2
TRM 3 B 1/2
C
B1
B2
A
SINGLE REED BIT
DOUBLE REED BIT
M U LT I P L E R E E D B I T
This bit will produce a single bead on
the edge of the material.
This bit gives a combination of
two beads on the material.
This bit gives a combination of four
beads on the material.
A
PART No.
B1
B2
C
in.
mm
in.
mm
in.
mm
in.
mm
TRS 3 B 1/2
.885
21.6
.397
10
7/32
5.5
2-1/2
63.5
TRD 3 B 1/2
.855
21.6
5/8
15.9
7/32
5.5
2-3/4
70
TRM 3 B 1/2
.855
21.6
1.16
29.5
7/32
5.5
3-1/4
82
WITH BALL BEARING
GUIDE
12.7 mm (1/2”)
SHANK
25
Premium
Quality
ROUTER BITS
EDGE FORMING BITS
CLASSICAL
C O M B I N AT I O N
BITS
MULTI FORM
COMBINATION
BITS
This combination bit,
developed by Carb-I-Tool,
will cut a multitude of different
shapes. Any part can be
selected, multiple passes
will also increase variety
of shapes.
C
B
R
R
A
With this combination bit the
number of standard mouldings
that can be produced is
enormous. With multiple
passes and a little
imagination any number of
beautiful mouldings can be
produced.
C
B
R
R
12.7 mm (1/2”) SHANK
A
12.7 mm (1/2”) SHANK
A
B
C
R RADIUS
in.
mm in.
mm in. mm in.
mm
TCB 50 B 1/2 1-21/32 42 1-3/16 30 3-5/8 92 3/16 4.8
TCB 60 B 1/2 1-21/32 42 1-3/16 30 3-5/8 92 3/16 4.8
PART No.
BEARING
No.
TB16
TB14
A
B
C
in. mm
in.
mm
in.
mm
TCB 500 B 1/2 1.65 41.9 1-5/16 33.3 3-3/4 95
TCB 600 B 1/2 1.65 41.9 1-5/16 33.3 3-5/8 92
PART No.
SOLID SURFACE BITS
COUNTER TOP BIT
COUNTER TOP BIT
NO DRIP DESIGN
TWO FLUTES - WITH
CARBI-SMOOTH
BEARING ASSEMBLY & BALL
BEARING GUIDE
NO DRIP DESIGN - TWO FLUTES
OTHERWISE 1/4”
12.7 mm (1/2”) SHANK
PART No.
TSS 1 B 1/2
A
25.4
B
22.9
C
82
PART No.
TSS 2
TSS 2 1/2
Replacement Bearing Assembly TBT21.
COUNTER
TOP BIT
Used in conjunction with
TSS 2 and TSS 2 1/2
C
TWO FLUTES - WITH
CARBI-SMOOTH BEARING
ASSEMBLY & BALL BEARING
GUIDE
R
Face
Top
SUFFIX 1/2 = 1/2”
A
A
19
19
B
9.3
9.3
C
41
54
R RADIUS
6.35
6.35
BEVEL
UNDERMOUNT
BOWL BIT
B
TWO FLUTES - WITH
CARBI-SMOOTH
BEARING ASSEMBLY
& BALL BEARING GUIDE
12.7 mm (1/2”) SHANK
PART No.
TSS 3 B
TSS 3 B 1/2
A
28.6
28.6
B
13.5
13.5
C
60
73
R RADIUS
6.35
6.35
A
35
B
32
ROMAN OGEE
UNDERMOUNT
BOWL BIT
ROUNDING
OVER
UNDERMOUNT
BOWL BIT
CARBIDE TIPPED
TWO FLUTES - WITH
ASSEMBLY & BALL BEARING GUIDE
CARBIDE TIPPED
TWO FLUTES - WITH
12.7 mm (1/2”) SHANK
12.7 mm (1/2”) SHANK
PART No.
A
B
TSS 5 B 1/2 50.8 25.4
C
85
R1
5/32
C
88
26
PART No.
TSS 4 B 1/2
R2
3/8
PART No.
TSS 6 B 1/2
A
44.5
B
25.4
C
85
R RADIUS
9.5
R RADIUS BEARING
in.
mm
No.
3/16 4.8
TB16
3/16 4.8
TB14
Premium
Quality
SOLID SURFACE BITS
ROUNDING
OVER BIT
C
CARBIDE TIPPED
TWO FLUTES - WITH CARBI-SMOOTH BEARING
CARBIDE TIPPED
TWO FLUTES - WITH BALL BEARING GUIDE
PART No.
TSS 7 B 1/2
TSS 9 B 1/2
A
60.3
66.7
B
22.2
24.1
C
80
82
R
12.7 mm (1/2”) SHANK
12.7 mm (1/2”) SHANK
R RADIUS
16
19
B
Face
A
PART No.
TSS 8 B 1/2
TSS 10 B 1/2
Replacement Bearing TB18.
FACE INLAY BIT
A
47.6
54
B
20.6
25.4
C
80
84
R RADIUS
16
19
ROUTER BITS
BULLNOSE BIT
SET. INVERTED
ROUNDING
OVER BIT
SURFACE
PLANER
1/4” WIDTH-1/2” WIDTH
C
CARBIDE TIPPED
TWO FLUTES - WITH
CARBIDE TIPPED - SIX FLUTES
B
12.7 mm (1/2”) SHANK
PART No.
TSS 11 B 1/2
TSS 21 B 1/2
TSS 31 B 1/2
TSS 12 B 1/2
TSS 22 B 1/2
TSS 32 B 1/2
A
25.4
25.4
25.4
25.4
25.4
25.4
12.7 mm (1/2”) SHANK
G
B
1/4”
1/4”
1/4”
1/2”
1/2”
1/2”
C
66
66
66
73
73
72
G
1.6
3.2
4.8
1.6
3.2
4.8
BRG ASS
TBT 22
TBT 21
TBT 20
TBT 22
TBT 21
TBT 20
A
PART No.
TSS 13 1/2
CHAMFER BIT 15°
A
50.8
B
9.5
C
80
BOWL CUTTER 15°
CARBIDE TIPPED
TWO FLUTES WITH BALL
BEARING GUIDE
CARBIDE TIPPED
TWO FLUTES WITH BALL
BEARING GUIDE
12.7 mm
(1/2”) SHANK
12.7 mm
(1/2”) SHANK
PART No.
TSS 14 B 1/2
A
28.6
B1
25.4
B2
28.4
PART No.
TSS 15 B 1/2
C
85
A
28.6
B1
23.5
COUNTER TOP BIT
BEVEL BIT
B2
25.4
C
85
B2
28.4
C
79.4
12.7mm
(1/2”) SHANK
12.7mm
(1/2”) SHANK
PART No.
TSS 16 1/2
PART No.
TSS 17 1/2
A
23.8
B
9.5
FLUSH TRIM
BIT
C
CARBIDE TIPPED TWO FLUTE WITH
ASSEMBLY& BALL
BEARING GUIDE
B
25.9
WITH CARBI-SMOOTH
BEARING ASSEMBLY & BALL
BEARING GUIDE
C
12.7mm (1/2”) SHANK
B
12.7mm (1/2”) SHANK
A
19
B1
25.4
C
54
OVERHANG
TRIM BIT
PART No.
TSS 18 B 1/2
A
25.4
C
87
B
PART No.
TSS 19 B 1/2
A
A
19
B
25.9
C
87
A
27
Premium
Quality
ROUTER BITS
FACE MOULDING BITS
Face moulding bits can be used for window sills, architraves, picture frames or handrails.
FACE MOULDING
BIT
C
FACE MOULDING
BIT
C
B
TFM 01 B 1/2
A1
in.
-
mm
17.8
A1
A2
12.7mm (1/2”) SHANK
PART No.
B
A2
in.
mm
1-1/4 31.8
B
in.
mm
1-5/16
33
A1
A2
12.7mm (1/2”) SHANK
C
in.
mm
3-3/8 86
PART No.
TFM 03 B 1/2
A
in.
1/2
A2
mm
12.7
in.
1-1/4
B
mm
31.8
in.
1-5/16
mm
33
C
in.
mm
3-3/8
86
FACE MOULDING
BIT
C
FACE MOULDING
BIT
C
B
B
A
PART No.
TFM 06 B 1/2
A
in.
0.945
B
mm
24
A
12.7mm (1/2”) SHANK
12.7mm (1/2”) SHANK
in.
1-7/16
C
mm
36.5
in.
3-1/2
mm
89
PART No.
TFM 12 B 1/2
A
in.
0.945
B
mm
24
in.
1-7/16
C
mm
36.5
in.
3-1/2
mm
89
FACE MOULDING
BIT
FACE MOULDING
BIT
C
C
B
B
A
PART No.
TFM 18 B 1/2
A
in.
0.945
B
mm
24
A
12.7mm (1/2”) SHANK
12.7mm (1/2”) SHANK
in.
1-7/16
C
mm
36.5
in.
3-1/2
mm
89
PART No.
TFM 24 B 1/2
A
in.
1.0
B
mm
25.4
in.
1-7/8
C
mm
47.6
in.
4
mm
102
FACE MOULDING
BIT
C
FACE MOULDING
BIT
C
B
B
A
12.7mm (1/2”) SHANK
PART No.
TFM 30 B 1/2
A
in.
1-3/4
B
mm
44.5
28
A
12.7mm (1/2”) SHANK
in.
1-1/2
C
mm
38.1
in.
4
mm
102
PART No.
TFM 32 B 1/2
A
in.
1-3/4
B
mm
44.4
in.
1-7/8
C
mm
48
in.
4-1/8
mm
105
Premium
Quality
FACE MOULDING BITS
FACE MOULDING
BIT
C
FACE MOULDING
BIT
C
B
B
A
12.7mm (1/2”) SHANK
PART No.
TFM 36 B 1/2
A
in.
1-1/2
B
mm
38.1
A
12.7mm (1/2”) SHANK
in.
1-5/8
C
mm
41.3
in.
3-5/8
PART No.
mm
92
TFM 42 B 1/2
A
in.
1-1/2
B
mm
38.1
in.
1-5/8
C
mm
41.3
in.
3-5/8
mm
92
FACE MOULDING
BIT
FACE MOULDING
BIT
C
C
B
B
TFM 48 B 1/2
A
in.
1-1/8
A
12.7mm (1/2”) SHANK
PART No.
in.
1-5/8
C
mm
41.3
A
12.7mm (1/2”) SHANK
B
mm
28.6
in.
3-13/16
PART No.
mm
96.5
TFM 54 B 1/2
A
in.
1-1/8
B
mm
28.6
in.
1-5/8
C
mm
41.3
in.
3-5/8
mm
92
FACE MOULDING
BIT
C
FACE MOULDING
BIT
C
B
B
TFM 60 B 1/2
A
in.
1-5/8
B
mm
41.3
A
12.7mm (1/2”) SHANK
PART No.
in.
1-3/4
C
mm
44.5
A
12.7mm (1/2”) SHANK
in.
3-7/8
PART No.
mm
98
TFM 66 B 1/2
A
in.
1-1/8
B
mm
28.6
in.
2-1/4
C
mm
57.1
in.
4-3/8
mm
111.5
FACE MOULDING
BIT
C
FACE MOULDING
BIT
C
B
TFM 72 B 1/2
B
mm
28.6
A
12.7mm (1/2”) SHANK
A
in.
1-1/8
B
A
12.7mm (1/2”) SHANK
PART No.
ROUTER BITS
Face moulding bits can be used for window sills, architraves, picture frames or handrails.
in.
2-1/4
C
mm
57.1
in.
4-3/8
mm
111.5
PART No.
TFM 80 B 1/2
A
in.
1-1/4
B
mm
31.8
in.
2-1/4
C
mm
57.1
in.
4-3/8
mm
111.5
29
Premium
Quality
ROUTER BITS
FACE MOULDING BITS
DOUBLE
REGENCY BIT
SINGLE
REGENCY BIT
A decorative face mould
to highlight the ends of
protruding boards such
as mantle supports.
protruding boards such
as mantle supports.
C
C
B2 B1
B2 B1
A
PART No.
TDR 33 B 1/2
A
in.
3/4
mm
19
A
12.7mm (1/2”) SHANK
12.7mm (1/2”) SHANK
B1
in.
mm
1-5/16
33
B2
in.
1.07
C
mm
27.2
in.
3-3/8
A
PART No.
mm
86
in.
TSR 33 B 1/2 15/16
B1
mm
23.9
in.
1-5/16
B2
mm
33
in.
45/64
C
mm
17.8
in.
3-5/8
mm
92
SURFACE
BEADING BIT
C
protruding boards, such
as mantle supports.
The range of Carb-I-Tool router
bits and associated products,
is continually being upgraded to
reflect industry requirements.
Carb-I-Tool (Aust.) Pty. Ltd.
reserves the right to change
specifications on existing tools
where neccessary.
B2 B1
A
12.7mm (1/2”) SHANK
PART No.
TSB 33 B 1/2
A
in.
3/4
B1
in.
mm
1-5/16
33
mm
19
B2
in.
5/8
C
mm
15.9
in.
3-3/8
mm
86
FINGER JOINT BITS
Produces a very strong joint due to the
extended glue line.
Supplied with five, finger slot cutters, which
are removable allowing for a range of joint
thickness.
5 C UTTERS
C
B
Designed to join large
boards, as well as making
spine and scarf, mortise
and tenon joints.
Supplied with three,
2-wing cutters as shown,
additional cutter may be
added if needed. For use
with router table.
W OOD T HICKNESS : 31-36mm
CARBIDE TIPPED -
A
12.7mm (1/2”)
SHANK
4 C UTTERS
3 C UTTERS
12.7mm (1/2”)
SHANK
2 C UTTERS
1 C UTTER
W OOD T HICKNESS :
PART No.
11-16mm
16-21mm
A
in.
TAFJ 90 B 1/2
TFJS 90
TFJE 90
mm
40
40
39.6
Replacement Arbor TA23
Replacement Ball Bearing TB 3
30
21-26mm
B
in.
CARBIDE TIPPED TWO WING
26-31mm
C
mm
in.
30
3-7/8
Finger Slot Cutter
Abutting Edge Cutter
mm
98.6
PART No.
TAFJ 60 1/2
TFG 60
in.
A1
mm
A2
mm
in.
mm
B2
mm
2-1/2
2-1/2
63.5
63.5
13.6
13.6
15/16
11/32
23.5
8.5
7.62
7.62
B1
C
in.
mm
3-5/8
92
Cutter only
Premium
Quality
JOINING BITS
TONGUE AND
GROOVE BITS
This bit makes professional hard to detect tongue
and groove joints. One bit only is required, simply
invert second piece of timber for matching joints.
ROUTER BITS
TONGUE AND GROOVE BITS
for floor boards
C
T
STYLE
A
B
STYLE A - Tongue & Groove Joint
A
12.7mm (1/2”) SHANK
TAG 01 B 1/2
A
C
T Min.
T Max.
TGA 100 1/2 1-3/4 44.5 1-5/32 29.4 3-1/8 79 15/32 12 1-9/64 29
PART No.
B
PART No.
STYLE B - Tongue & Groove Joint
OTHERWISE 1/4”.
T
STYLE
TAG 02 B 1/2
TAG 01 B 1/2
TAG 02 B 1/2
TAGC 01
TAGC 02
A
B
in.
mm
in.
mm
32.4
1 3/64
26.7
1 5/16
33.4
17/64
6.7
CUTTER ONLY – TAG 01 B 1/2
CUTTER ONLY – TAG 02 B 1/2
C
in.
-
mm
82.5
63.7
Replacement Arbor TA14 (TAG 01 B 1/2)
Replacement Arbor TA5 (TAG 02 B 1/2)
B
A
B
C
T Min.
T Max.
TGB 50
1.180 30 63/64 25 2-1/4 57.1 7/16 11.1 7/8 22.2
TGB 50 1/2 1.180 30 63/64 25 2-1/4 57.1 7/16 11.1 7/8 22.2
TGB 100 1/2 1-3/4 44.4 1-5/32 29.4 3-1/4 82 5/8 15.9 1-1/32 27.8
TGB 200 1/2 1-3/4 44.4 2
50.8 4
102 11/16 17.5 1-15/16 49.2
PART No.
TONGUE AND GROOVE BIT
for wall panel
MITRE LOCK BIT
Primarily designed for joining material at
90o, however this bit will also produce
reasonably strong straight joints. One bit is
required. For 900 joins cut second piece of
timber at 900 to first piece to produce joint.
For straight joints invert the second piece of
timber for matching joint.
C
90° JOINTS
T
B
A
A
B
4
STRAIGHT
JOINTS
4
3
2
1
B
A
12.7mm (1/2”) SHANK
C
A
B
in. mm
in. mm
TML 60 1/2 2-3/8 60.3 61/64 24.2
PART No.
T
C
in.
3
mm
76
T Min.
mm
8.7
T Max.
mm
20
TTG 10 1/2
To cut matching piece remove slotting cutter and add spacer supplied
PART No.
TTG 10 1/2
TTGR 10
TTGS 10
TTGC 10
TTGW 10
A
in.
1-5/8
1-1/8
1-5/8
1-5/8
B
mm
41.3
28.6
41.3
41.3
in.
1
C
T Min.
T Max.
mm in. mm
in mm in
mm
25.4 3-1/8 79.4 15/32 12.0 13/16 20.6
Cutter only (1)
10.5 mm
Slot cutter (2)
4.0 mm
Bevel cutter (3)
10.8 mm
Spacer
(4)
JOINTING BIT
WOOD THICKNESS
MIN.: 10 mm
MAX.: 45 mm
B
12.7mm (1/2”) SHANK
DRAWER JOINT BIT
PART No.
This bit is very easy to use for
quick joining. It gives you the
option to create a plain or rebated
drawer by varying the depth of cut.
WOOD THICKNESS
MIN.: 10 mm for X
MIN.: 15 mm for Y
TGC 100 1/2
X
12.7mm (1/2”)
SHANK
PART No.
TGD 35 1/2
A
in.
1-3/4
B
mm
44.4
in.
1-7/8
C
mm
47
in.
3-7/8
mm
98
Increases joint strength by
increasing glued surface area.
Also suitable for solid
surface materials.
NEW
Y
B
in.
.768
X
REBATE
PLAIN
Y
mm
35
A
WAVY JOINT BIT
A
in.
1-3/8
C
C
mm
19.5
in.
2-1/2
mm
63.5
PART No.
TWJ 16 1/2
A
in.
5/8
B
mm
16
in
2-1/64
C
mm
51.3
in
4-1/32
mm
102.3
31
Premium
Quality
ROUTER BITS
D O O R PA N E L B I T S
FOR BOTH RAIL AND STILE
REVERSIBLE PANEL
DOOR BITS
PANEL DOOR BITS
The TPD 1B-1/2 and TPD 2-1/2 are
manufactured as matched sets in order that the
rail and stile fit together as perfect joints.
The TPD 1B-1/2 now has a ball bearing guide
ensuring simpler set ups for professional results.
Arches on your cupboard doors are now much
easier to achieve.
1/4"
C
1-5/8"
B
A
A
ALTERNATIVE USE
PART No. TPDR 10 B 1/2
RAIL
STILE
STILE
Replacement Grooving Cutter TPDG 9
Replacement Arbor TA 6
PANEL
Perspective View of Panel Door
(with one rail removed).
PANEL GROOVE: 4 mm
STILE
RAIL
CARBIDE TIPPED TWO FLUTES TWO BIT SET
YOUR
CHOICE OF
ANY
COMPLETE
PROFILE
ASSEMBLIES
12.7mm (1/2”) SHANK
PROFILE
PART No.
TPD 1 B 1/2
TPD 2 1/2
A
mm
55
54
B
mm
29
25
C
mm
94
76
Wood Thickness
M in: 16mm
M ax: 20mm
PA R T N U M B E R S
COMMON
REVERSIBLE
PROFILE
CUTTER
OGEE
WOOD THICKNESS
MIN:20 mm
MAX: 25 mm
TPDR 10 B 1/2
TPDC 10
TPDR 11 B 1/2
TPDC 11
TPDR 12 B 1/2
TPDC 12
TPDR 13 B 1/2
TPDC 13
CLASSICAL
STACKED STILE A
RAIL ASSEMBLIES
Now you can machine stile and rail with just
one bit without having to adjust and switch,
reverse or remove the bit from your router.
Designed for use in your router table, this bit
will machine 16mm to 20mm material.
Ball bearing guide allows you to do odd
shapes such as arches or cathedral pattern
doors. Assembly feature allows any cutter to
be removed for economical repair,
sharpening, or replacement.
Also makes glass door and tongue
and groove joints.
TWO FLUTE, CARBIDE TIPPED, BALL BEARING
GUIDE
TRADITIONAL
1/4"
STRAIGHT
1-5/8"
PART No.
TPDS 11 B 1/2
11mm
STEP 1.
Cut the Stile
STEP 2.
Cut the Rail
Replacement Ball Bearing TB12, Replacement grooving Cutter TPDG 9.
32
Stile and Rail
Premium
Quality
PA N E L D O O R & W I N D O W B I T S
WINDOW SASH & RAIL BITS
These two bits work together to produce a complete divided light
sash. The TCW 2B 1/2 is used to cope the rails, sash bars, and
muntins. The TCW 1B 1/2 cuts the profile on all components.
Application:
Cuts all composition materials, plywood, hard wood, and soft wood.
Use on table mounted portable routers.
C
R
B
4mm
WOOD THICKNESS
MIN:16 mm
MAX: 20 mm
A
C
SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”.
PART No.
TPS 8 B-1
TPS 8 B 1/2-1
TPSG 8
A
in.
1-3/8
1-3/8
1-3/8
B
mm
35
35
35
in.
17/32
17/32
C
mm
in.
13.5 2-1/2
13.5 2-7/8
Cutter only
mm
63.5
73
R RADIUS
mm
8
8
-
C
R
R B
16mm
R
R
Replacement Grooving Cutter - TPSG 8
ROUTER BITS
PANEL DOOR BITS
B
A
A
C
R
B
SUFFIX 1/2 = 1/2”
SHANK,
OTHERWISE 1/4”.
PART No.
TPS 8-2
TPS 8 1/2-2
12.7mm (1/2”) SHANK
A
PART No.
A
in.
1-3/8
1-3/8
B
mm
35
35
in.
7/8
7/8
C
mm
22.2
22.2
in.
2-1/4
2-5/8
mm
57.1
67
R RADIUS
mm
8
8
TCW 1B 1/2
TCW 2B 1/2
TCW 3
A
in.
1.654
1.654
1.654
B
mm
42
42
42
in.
1-1/2
.609
C
in.
mm
3.55 90.1
2.77 70.5
Cutter only
mm
38.1
15.5
R RADIUS
in.
mm
.200 5.08
.200 5.08
R A I S E D PA N E L D O O R B I T S
RAISED PANEL BITS
PANEL BITS WIDE
FLAT BOTTOM
This bit produces an Ogee Fillet on
panel doors and draw fronts.
C
C
Specially designed for grooving
panel doors.
Bevel
FLUTES
12.7mm 1/2”
SHANK
in.
TOG 57 B 1/2 2-1/4
TOG 67 B 1/2 2-1/4
A2
A1
A
A
PART No.
B
mm
57
57
in.
41/64
41/64
C
mm
16.3
16.3
in.
3
3
mm
76
76
16.3
2-3/4
70
SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4”.
BEARING No.
TB11
TB9
Also available without Ball Bearing
TOG 57 1/2
2-1/4
57
41/64
NO BEARING
ELLIPTICAL BEADING
BITS WIDE FLAT
BOTTOM
C
A
12.7mm (1/2”) SHANK
TE 808 1/2
TE 812 1/2
B
R
B
in.
7/16
9/16
C
mm
11
14.2
in.
3/8
3/8
1/2
1/2
A2
mm
9.5
9.5
12.7
12.7
B
in. mm
7/16 11
7/16 11
9/16 14.3
9/16 14.3
C
in.
1-5/8
2-1/8
1-13/16
2-5/16
mm
41
54
46
58.5
BEVEL
25°
25°
25°
25°
This bit is used for panel doors
and other decorative edges.
C
A
in.
mm
1-13/64 30.5
1-1/4
31.8
A1
in. mm
TPD 25
1
25.4
TPD 25 1/2
1
25.4
TPD 50
1.575 40
TPD 50 1/2 1.575 40
PART No.
RAISED PANEL BIT
Specially designed for grooving
panel doors.
PART No.
B
B
in.
2-7/16
2-9/16
mm
62
65
R RADIUS
in.
mm
3/8
9.5
3/8
9.5
FLUTES WITH BALL
BEARING GUIDE
Bevel
12.7mm (1/2”)
SHANK
A1
in. mm
TRP 40 B 1/2 1-5/8 40
PART No.
B
A2
A1
A2
in.
1/8
B
mm
3.2
in.
1/2
C
mm in. mm
12.7 2-5/8 67
BEVEL
25°
33
Premium
Quality
ROUTER BITS
R A I S E D PA N E L B I T S
RAISED PANEL
BITS
VERTICAL RAISED
PANEL BIT
Also available with a ball
bearing guide.
C
C
CARBIDE
TIPPED TWO FLUTES
B
B
12.7mm
(1/2”)
SHANK
PART No.
TPD 3 1/2
TPD 3 B 1/2
A
A
A
in.
2.83
2.83
B
mm
72
72
in.
3/4
3/4
12.7mm (1/2”) SHANK
C
mm
19.0
19.0
in.
2-3/4
3
mm
70
76
PART No.
TPDV 3 1/2
A
in.
1.36
B
mm
34.5
in.
1.7
C
mm
43
in.
3-5/8
mm
92
RAISED PANEL
BITS
VERTICAL RAISED
PANEL BIT
bearing guide.
C
TPD 4 1/2
TPD 4 B 1/2
B
B
12.7mm (1/2”)
SHANK
PART No.
C
A
A
A
in.
2-3/8
2-3/8
B
mm
60.3
60.3
in.
11/16
11/16
12.7mm (1/2”) SHANK
C
mm
17.3
17.3
in.
2-5/8
-
mm
66.8
72.1
PART No.
TPDV 4 1/2
A
in.
1-1/8
B
mm
28.6
in.
1-1/2
C
mm
38.1
in.
3-1/3
mm
89
RAISED PANEL
BITS
VERTICAL RAISED
PANEL BIT
bearing guide.
C
B
12.7mm
(1/2”)
SHANK
A
12.7mm (1/2”) SHANK
PART No.
TPD 5 1/2
TPD 5 B 1/2
A
in.
3
3
B
mm
76.2
76.2
in.
5/8
5/8
C
mm
15.9
15.9
in.
2-3/4
2-3/4
mm
70
70
PART No.
TPDV 5 1/2
A
in.
1-1/4
B
mm
31.8
in.
1-1/2
C
mm
38.1
in.
3-1/3
mm
89
RAISED PANEL BITS
VERTICAL RAISED
PANEL BIT
Also available with a ball bearing guide.
C
12.7mm
(1/2”) SHANK
B
A
12.7mm (1/2”) SHANK
PART No.
TPD 6 1/2
TPD 6 B 1/2
A
in.
3
3
B
mm
76
76
34
in.
5/8
5/8
C
mm
15.9
15.9
in.
2-3/4
3
mm
70
76
PART No.
TPDV 6 1/2
A
in.
1-1/8
B
mm
28.6
in.
2
C
mm
50.8
in.
3-7/8
mm
98
Premium
Quality
SLOTTING CUTTERS & ASSEMBLIES
Replacement and additional
cutters can be purchased
singularly for economy where
you have an existing arbor.
ASSEMBLIES
ASSEMBLIES
By using the guide on your
routing machine, the maximum
depth of cut can be obtained.
Ball bearing guide eliminates
the cumbersome and time
consuming job of
setting up router
machine guides.
B
50.8mm
14.4 mm max depth
PART No.
B
A
CUTTER BORE 8mm (5/16”)
PART No.
T 500-1.6 M
T 500-2 M
T 500-2.5 M
T 500-2.8 M
T 500-3.2 M
T 500-3.6 M
T 500-4 M
T 500-4.8 M
T 500-5.5 M
T 500-6.4 M
T 500-8.0 M
A
in.
2
2
2
2
2
2
2
2
2
2
2
B
mm
50.8
50.8
50.8
50.8
50.8
50.8
50.8
50.8
50.8
50.8
50.8
in.
1/16
5/64
3/32
7/64
1/8
9/64
5/32
3/16
7/32
1/4
5/16
mm
1.6
2
2.5
2.8
3.2
3.6
4
4.8
5.5
6.35
8
•
•
TA 500-1.6 M
TA 500-1.6 M 1/2
TA 500-2 M
TA 500-2 M 1/2
TA 500-2.5 M
TA 500-2.5 M 1/2
TA 500-2.8 M
TA 500-2.8 M 1/2
TA 500-3.2 M
TA 500-3.2 M 1/2
TA 500-3.6 M
TA 500-3.6 M 1/2
TA 500-4 M
TA 500-4 M 1/2
TA 500-4.8 M
TA 500-4.8 M 1/2
TA 500-5.5 M
TA 500-5.5 M 1/2
TA 500-6.4 M
TA 500-6.4 M 1/2
TA 500-8 M
TA 500-8 M 1/2
PART No.
B
in.
1/16
1/16
5/64
5/64
3/32
3/32
7/64
7/64
1/8
1/8
9/64
9/64
5/32
5/32
3/16
3/16
7/32
7/32
1/4
1/4
5/16
5/16
mm
1.6
1.6
2
2
2.5
2.5
2.8
2.8
3.2
3.2
3.6
3.6
4
4
4.8
4.8
5.5
5.5
6.4
6.4
8
8
ARBOR
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 17
TA 18
•
•
B
A
CUTTER BORE 8 mm (5/16”)
TX SERIES: BORE 12.7 mm (1/2”)
PART No.
T 700-1.6 M
T 700-2 M
T 700-2.5 M
T 700-2.8 M
T 700-3.2 M
T 700-3.6 M
T 700-4 M
T 700-4.8 M
T 700-5.5 M
T 700-6.4 M
T 700-8.0 M
TX 700-4.8 M
TX 700-5.5 M
TX 700-6.4 M
TX 700-8 M
A
in.
2
2
2
2
2
2
2
2
2
2
2
3-5/32
3-5/32
3-5/32
3-5/32
B
mm
50.8
50.8
50.8
50.8
50.8
50.8
50.8
50.8
50.8
50.8
50.8
80
80
80
80
in.
1/16
5/64
3/32
7/64
1/8
9/64
5/32
3/16
7/32
1/4
5/16
3/16
7/32
1/4
5/16
mm
1.6
2
2.5
2.8
3.2
3.6
4
4.8
5.5
6.35
8
4.8
5.5
6.35
8
•
•
TA 700-1.6 M
TA 700-1.6 M 1/2
TA 700-2 M
TA 700-2 M 1/2
TA 700-2.5 M
TA 700-2.5 M 1/2
TA 700-2.8 M
TA 700-2.8 M 1/2
TA 700-3.2 M
TA 700-3.2 M 1/2
TA 700-3.6 M
TA 700-3.6 M 1/2
TA 700-4 M
TA 700-4 M 1/2
TA 700-4.8 M
TA 700-4.8 M 1/2
TXA 700-4.8 M 1/2
TA 700-5.5 M
TA 700-5.5 M 1/2
TXA 700-5.5 M 1/2
TA 700-6.4 M
TA 700-6.4 M 1/2
TXA 700-6.4 M 1/2
TA 700-8 M
TA 700-8 M 1/2
TXA 700-8 M 1/2
B
mm
1.6
1.6
2
2
2.5
2.5
2.8
2.8
3.2
3.2
3.6
3.6
4
4
4.8
4.8
4.8
5.5
5.5
5.5
6.4
6.4
6.4
8
8
8
ARBOR
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 15
TA 16
TA 8
TA 15
TA 16
TA 8
TA 15
TA 16
TA 8
TA 17
TA 18
TA 8
B
50.8mm
14.4 mm max depth
CARBIDE TIPPED FOUR FLUTES WITH BALL BEARING GUIDE
TX CUTTERS: MAX DEPTH 29mm WIDTH 80mm.
in.
1/16
1/16
5/64
5/64
3/32
3/32
7/64
7/64
1/8
1/8
9/64
9/64
5/32
5/32
3/16
3/16
3/16
7/32
7/32
7/32
1/4
1/4
1/4
5/16
5/16
5/16
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 1
TA 3
Four flute bits with ball bearing
guide produce an accurate and
professional job
with minimum
set up time.
TX CUTTERS: MAX DEPTH 30mm WIDTH 80mm.
PART No.
ARBOR
ASSEMBLIES
Bits without bearings can be
used where the bearing and
nut interfere with the
work piece
configuration.
Four flute cutters are used for extra
smooth cutting and smoother
finishes with longer tool life between
sharpenings.
mm
1.6
1.6
2
2
2.5
2.5
2.8
2.8
3.2
3.2
3.6
3.6
4
4
4.8
4.8
5.5
5.5
6.4
6.4
8
8
ASSEMBLIES
SLOTTING
CUTTER ONLY
TA 500-1.6 MB
TA 500-1.6 MB 1/2
TA 500-2 MB
TA 500-2 MB 1/2
TA 500-2.5 MB
TA 500-2.5 MB 1/2
TA 500-2.8 MB
TA 500-2.8 MB 1/2
TA 500-3.2 MB
TA 500-3.2 MB 1/2
TA 500-3.6 MB
TA 500-3.6 MB 1/2
TA 500-4 MB
TA 500-4 MB 1/2
TA 500-4.8 MB
TA 500-4.8 MB 1/2
TA 500-5.5 MB
TA 500-5.5 MB 1/2
TA 500-6.4 MB
TA 500-6.4 MB 1/2
TA 500-8.0 MB
TA 500-8.0 MB 1/2
B
in.
1/16
1/16
5/64
5/64
3/32
3/32
7/64
7/64
1/8
1/8
9/64
9/64
5/32
5/32
3/16
3/16
7/32
7/32
1/4
1/4
5/16
5/16
ROUTER BITS
SLOTTING
CUTTER ONLY
PART No.
•
•
TA 700-1.6 MB
TA 700-1.6 MB 1/2
TA 700-2 MB
TA 700-2 MB 1/2
TA 700-2.5 MB
TA 700-2.5 MB 1/2
TA 700-2.8 MB
TA 700-2.8 MB 1/2
TA 700-3.2 MB
TA 700-3.2 MB 1/2
TA 700-3.6 MB
TA 700-3.6 MB 1/2
TA 700-4 MB
TA 700-4 MB 1/2
TA 700-4.8 MB
TA 700-4.8 MB 1/2
TXA 700-4.8 MB 1/2
TA 700-5.5 MB
TA 700-5.5 MB 1/2
TXA 700-5.5 MB 1/2
TA 700-6.4 MB
TA 700-6.4 MB 1/2
TXA 700-6.4 MB 1/2
TA 700-8 MB
TA 700-8 MB 1/2
TXA 700-8 MB 1/2
B
in.
1/16
1/16
5/64
5/64
3/32
3/32
7/64
7/64
1/8
1/8
9/64
9/64
5/32
5/32
3/16
3/16
3/16
7/32
7/32
7/32
1/4
1/4
1/4
5/16
5/16
5/16
mm
1.6
1.6
2
2
2.5
2.5
2.8
2.8
3.2
3.2
3.6
3.6
4
4
4.8
4.8
4.8
5.5
5.5
5.5
6.4
6.4
6.4
8
8
8
ARBOR
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 4
TA 5
TA 7
TA 4
TA 5
TA 7
TA 4
TA 5
TA 7
TA 1
TA 3
TA 7
35
Premium
Quality
ROUTER BITS
CARB-I-TOOL ROUTER BIT KITS
5 Router Bits, presented in a sturdy, handled, plastic carry case. The Bits are secured in a multi-holed
foam compound tray which can hold up to 21x1/4” Shank Bits and 12 x1/2” Shank Bits.
Storage Box only
Part No. TRBS 500.
1/4” SHANK KIT
1/2” SHANK KIT
PART NO. TRBS 20 1/4
PART No.
Description
T219M
TS8016B
T508B
T1712B
T916B
19mm Diam
1/2" Diam
1/4" Rad
3/8" Rebate
45˚Chamfer
PART NO. TRBS 30 1/2
Catalogue
Page No.
7
10
19
22
22
Straight Bit
Flush Tr imming Bit
Rounding Over Bit
Rebating Bit
Chamfer Bit
PART No.
Description
T1413M
T8016B 1/2
T512B 1/2
T1712B 1/2
T916B 1/2
13mm Diam
1/2" Diam
3/8" Rad
3/8" Rebate
45˚Chamfer
Catalogue
Page No.
7
10
19
22
22
BEARINGS, COLLETS, ARBORS & KEYS
BALL BEARINGS
ARBORS
ID
B
PART No.
TB2
TB3
TB4
TB5
TB6
TB7
TB8
TB9
TB10
TB11
TB12
TB13
TB14
TB15
TB16
TB17
TB18
TB19
TB20
TB21
OD
in.
3/8
3/4
3/4
1/4
1/2
5/8
3/8
3/8
1/2
0.866
0.945
5/8
13/16
3/4
1.102
1-1/8
3/4
-
PART No.
OD
B
mm
9.5
28
19
19
6.35
12.7
15.9
9.5
9.5
12.7
22
24
15.9
20.6
19
28
28.6
19
24
35
in.
1/8
23/64
5/32
7/64
3/16
3/16
1/8
5/32
3/16
.275
5/16
3/16
19/64
9/32
5/16
5/16
-
NEW
ID
mm
3.2
9
4
6
2.7
4.8
4.8
3.2
4
4.8
6.9
8
4.8
7.6
7.1
8
8
6
5
11
in.
1/4
5/16
1/2
1/8
1/4
3/16
3/16
1/8
3/16
5/16
5/16
1/4
1/4
1/4
0.472
1/2
5/16
-
mm
6.35
8
12.7
6
3.2
6.35
4.8
4.8
3.2
4.8
8
8
6.35
6.35
6.35
12
12.7
8
15
15
•
CARBI-SMOOTH
BEARING
ASSEMBLIES
PART No.
ID
TBT19 has a bevelled smooth
surface. All other bearings have
a straight surface (as illustrated).
B
BRG.
USED
TB7
TB7
TB14
TB14
OD
in.
3/4
5/8
3/4
7/8
mm
19
15.9
19
22.2
in.
15/64
15/64
15/64
15/64
ID
mm
6
6
6
6
in.
1/4
1/4
1/4
1/4
A1
in.
1/4
1/2
1/4
1/2
1/2
1/2
1/4
1/4
1/4
1/2
1/2
1/2
1/2
mm
6.35
12.7
6.35
12.7
12.7
12.7
6.35
6.35
6.35
12.7
12.7
12.7
12.7
•
•
•
•
TA8
TA11
TA15
TA16
TA17
TA18
TA22
TA24
TA25
TA26
A1
in.
1/2
1/4
1/4
1/2
1/4
1/2
1/2
1/2
1/4
1/2
mm
12.7
6.35
6.35
12.7
6.35
12.7
12.7
12.7
6.35
12.7
36
PART No.
TK1
TK2
TK3
TK4
TK5
TK6
B
in.
7/8
7/8
.760
.760
1-1/4
.950
1-1/8
5/8
1-1/2
1-29/64
1-25/69
1-3/4
2.07
mm
22.2
22.2
19.3
19.3
31.8
24.1
28.8
15.9
38.1
37
50
44.4
52.5
C
in.
2-3/8
2-5/8
2.260
2.510
3.100
3.100
2-3/8
2.062
3
3-5/16
2
3-5/8
3-25/32
A2
in.
mm
1/2
12.7
.295
7.5
0.315
8
0.315
8
0.315
8
0.315
8
5/8
16
5/8
16
B
in.
3/32
0.030
0.030
0.030
0.120
0.120
0.33
0.33
mm
2.4
0.8
0.8
0.8
3
3
8.5
8.5
C
in.
2.250
1.465
1-7/8
1.780
1.825
1.870
3 25/32
3 25/32
2 45/64
2 45/64
mm
6.35
6.35
6.35
6.35
TC3 suits Makita
Trimmer model
3700B.
OD
ALLEN
KEYS
A2
in.
mm
0.315
8
0.315
8
0.315
8
0.315
8
0.315
8
1/2
12.7
1/4
6.35
.295
7.5
0.315
8
0.315
8
0.315
8
1/2
12.7
5/8
16
COLLETS
OD
B
TA1
TA3
TA4
TA5
TA6
TA7
TA9
TA10
TA13
TA19
TA20
TA21
TA23
A2 A1
ACROSS FLATS
in.
mm
3/32
5/32
1.5
2.0
2.5
3.0
mm
60
67
57.4
63.7
78.7
78.7
60
52.4
76
84
100
92
96
TA 22 12/32 NEF Thread
TA 24 1/4
UNF Thread
Also available a range of: shielded bearings, see page 22.
rubber sealed bearings, see page 43
BRG ASSEMBLY
No.
TBT19
TBT20
TBT21
TBT22
C
B
CARE OF BEARINGS:
All bearings should be kept free
of dust and dirt. They should be
cleaned in glue solvent and
lightly oiled after each use.
PART No.
TC1
TC2
TC3
TC4
TCM2
TCM3
TCM4
in.
1/2
1/2
1/2
1/4
1/4
1/4
ID (BORE)
mm
12.7
12.7
11.0
12.7
6.35
6.35
6.35
in.
1/4
3/8
1/4
1/4
–
–
–
mm
6.35
9.5
6.35
6.35
2
3
4
STYLE
STRAIGHT
STRAIGHT
CONE
STEPPED
STRAIGHT
STRAIGHT
STRAIGHT
mm
57.1
37.2
47
45.2
46.4
47.5
96
96
68.5
68.5
THROUGH BORING
DRILLS
HINGE BORING DRILLS
For multi spindle machines.
Suitable for Bench Press and secured
Hand Drill. Not suitable for portable
routing machines.
Suitable for Bench Press and secured Hand Drill.
Not suitable for portable routing machines.
CARBIDE TIPPED
RIGHT
HAND
PART No.
WDT5R70
WDT8R70
LEFT
HAND
PART No.
WDT5L70
WDT8L70
CARBIDE TIPPED
A
L
C
mm
5
8
mm
35
35
mm
70
70
RIGHT
HAND
LEFT
HAND
PART No.
10mm diameter shank x
26mm long with
adjusting screw.
PART No.
WD25R56
WD25R70
WD30R56
WD30R70
WD35R56
WD35R70
WD25L56
WD25L70
WD30L56
WD30L70
WD35L56
WD35L70
A
C
mm
25
25
30
30
35
35
mm
56
70
56
70
56
70
C
WOOD BORING DRILLS
WOOD BORING DRILLS
DOWEL DRILLS
Suitable for Bench Press and secured Hand Drill.
Not suitable for portable routing machines.
CARBIDE TIPPED
RIGHT
HAND
PART No.
WD3R56
WD3R70
WD4R56
WD4R70
WD5R56
WD5R70
WD6R56
WD6R70
WD6.5R56
WD6.5R70
WD8R56
WD8R70
WD9R56
WD9R70
WD9.5R56
WD9.5R70
WD10R56
WD10R70
WD11R56
WD11R70
WD12R56
WD12R70
WD15R56
WD15R70
LEFT
HAND
PART No.
WD3L56
WD3L70
WD4L56
WD4L70
WD5L56
WD5L70
WD6L56
WD6L70
WD6.5L56
WD6.5L70
WD8L56
WD8L70
WD9L56
WD9L70
WD9.5L56
WD9.5L70
WD10L56
WD10L70
WD11L56
WD11L70
WD12L56
WD12L70
WD15L56
WD15L70
A
L
C
mm
3
3
4
4
5
5
6
6
6.5
6.5
8
8
9
9
9.5
9.5
10
10
11
11
12
12
15
15
mm
18
18
20
27
27
35
27
35
27
35
27
35
27
35
27
35
27
35
27
35
27
35
27
35
mm
56
70
56
70
56
70
56
70
56
70
56
70
56
70
56
70
56
70
56
70
56
70
56
70
A
10mm diameter shank x 26mm long
with adjusting screw.
HINGE BORING
DRILLS
For Bench Press and secured Hand Drill.
High quality two flute drill with two scribing
teeth produces cleanly cut hole.
Not suitable for portable routing machines
CARBIDE TIPPED
RIGHT HAND
PART No.
10mm diameter shank x
27mm long (56mm) or
35mm long (70mm) with
adjusting screw in end.
TH 20 1/2
TH 25 3/8
TH 25 1/2
TH 30 1/2
TH 32 1/2
TH 35 3/8
TH 35 1/2
TH 40 1/2
TH 50 1/2
A
mm
20
25
25
30
32
35
35
40
50
C
C
mm
63.5
57.2
63.5
63.5
63.6
67
67
67
67
A
TOY WHEEL
CUTTERS
This bit gives the perfect wheel
shape for toy making.
Available in 3 sizes with a 6mm
interchangeable drill.
Recommended for use in
Bench or secured Hand Drills.
(Not suitable for routing
machines)
ADJUSTABLE HINGE
BORING BIT (TCT)
Adjusts from 20mm-50mm width. Ideal
for deep repetitive holes up to 75mm
in depth.
For bench drill or secured portable
hand drill only. These bits are not
suitable for portable router machines.
C
12.7mm (1/2”) SHANK
PART No.
10mm (3/8”) SHANK
PART No.
TAHB 50
A
mm
22.5 - 48
B
B
mm
11
C
mm
97
A
TWCH 40 1/2
TWCH 50 1/2
TWCH 60 1/2
A
mm
40
50
60
B
mm
6.3
7
8
C
mm
90
92
92
see also Expansion Bits page 55
37
Premium
Quality
ROUTER BITS
REPLACEABLE INSERT ROUTER BITS
Replaceable Insert
ROUTER BITS
STRAIGHT BITS
TWO FLUTES
TWO FLUTE
All sizes in millimetres
Part No.
D
B
L
d
INSERT NO.
R 1912
19
12
48
6.35
PL 12 12 1.5
R 1912 1/2
19
12
58
12.7
PL 12 12 1.5
STRAIGHT BITS
TWO FLUTES
TWO FLUTE
• Use End Cutting Inserts for Rebating and Grooving.
• Supplied with End Cutting Inserts when New.
Part No.
D
B
L
d
R 1830 1/2
R 1830 .16
R 1840 1/2
R 1930 1/2
R 1930 .16
R 1940 1/2
R 1950 1/2 -2
R 2030 1/2
R 2030 16
R 2040 1/2
R 2040 16
18
18
18
19
19
19
19
20
20
20
20
30
30
40
30
30
40
50
30
30
40
40
75
75
80
75
75
84
94
85
85
85
85
12.7
16.0
12.7
12.7
16
12.7
12.7
12.7
16
12.7
16
STRAIGHT BITS
PL 29.5 12 1.5 EC
PL 29.5 12 1.5 EC
PL 39.5 12 1.5 EC
PL 29.5 12 1.5 EC
PL 29.5 12 1.5 EC
PL 39.5 12 1.5 EC
PL 49.5 12 1.5 EC
PL 29.5 12 1.5 EC
PL 29.5 12 1.5 EC
PL 39.5 12 1.5 EC
PL 39.5 12 1.5 EC
TWO FLUTES
TWO FLUTE
Note: 3 Hole Fixing.
(3 Hole Inserts used for greater support.)
INSERT NO.
Part No.
D
B
L
d
R 1850 1/2 -3
R 1950 1/2 -3
R 1950 .16 -3
18
19
19
50
50
50
94
94
94
12.7
12.7
16
INSERT NO.
PL 50 12 1.7 EC
PL 50 12 1.7 EC
PL 50 12 1.7 EC
• Use End Cutting Inserts for Rebating and Grooving.
• Supplied with End Cutting Inserts when new.
NOTE: Part No’s include cutter bodies complete with Inserts, Screws and Torx Key. Bearing if applicable.
End Cutting Inserts, have End Cutting Clearance.
38
Premium
Quality
ONE BEARING
TWO FLUTES
TWO FLUTE
Part No.
D
B
L
d
INSERT NO.
R 1912 B
R 1912 B 1/2
19
19
12
12
57
65
6.35
12.7
PL 12 12 1.5
PL 12 12 1.5
Replacement bearing TB-5
FLUSH TRIMMING BITS
DOUBLE BEARING
TWO FLUTE
TWO FLUTES
Part No.
D
B
L
d
INSERT NO.
R 1912 BB
R 1912 BB 1/2
19
19
12
12
61
69
6.35
12.7
PL 12 12 1.5
PL 12 12 1.5
ROUTER BITS
FLUSH TRIMMING BITS
FLUSH TRIMMING BITS
ONE BEARING
TWO FLUTE
TWO FLUTES
Part No.
D
B
L
d
INSERT NO.
R 1930 B 1/2
R 1940 B 1/2
19
19
30
40
82
93
12.7
12.7
PL 30 12 1.5
PL 40 12 1.5
FLUSH TRIMMING BITS
DOUBLE BEARING
TWO FLUTE
TWO FLUTES
Part No.
D
B
L
d
INSERT NO.
R 1930 BB 1/2
R 1940 BB 1/2
19
19
30
40
93
105
12.7
12.7
PL 30 12 1.5
PL 40 12 1.5
FLUSH TRIMMING BITS
ONE BEARING
TWO FLUTE
TWO FLUTES
Part No.
D
B
L
d
R 1950 B 1/2 -3
19
50
100
12.7
INSERT NO.
PL 50 12 1.7 E/C
NOTE: 3 Hole Fixing.
3 Hole Inserts used for greater support.
INVERTED FLUSH TRIMMING BITS
TWO FLUTES
TWO FLUTE
1.6mm
Part No.
RV 1930 B 1/2
RV 1940 B 1/2
RV 2440 B 1/2
RV 2830 B 1/2
RV 2840 B 1/2
RV 2850 B 1/2 -2
D
B
L
d
INSERT NO.
REPLACE.
BEARINGS
19.05
19.05
24.0
28.6
28.6
28.6
30
40
40
30
40
50
78
88
88
78
88
98
12.7
12.7
12.7
12.7
12.7
12.7
PL 29.5 12 1.5 EC
PL 39.5 12 1.5 EC
PL 39.5 12 1.5 EC
PL 29.5 12 1.5 EC
PL 39.5 12 1.5 EC
PL 49.5 12 1.5 EC
TB-4
TB-4
TB-20
TB-18
TB-18
TB-18
Supplied with End Cutting Inserts when new.
INVERTED FLUSH TRIMMING BITS
1.6mm
TWO FLUTES
TWO FLUTE
Part No.
RV 1950 B 1/2 -3
RV 2450 B 1/2 -3
D
B
L
19.05
24
50
50
98
98
d
INSERT NO.
12.7 PL 50 12 1.7 EC
12.7 PL 50 12 1.7 EC
REPLACE.
BEARINGS
TB-4
TB-20
39
Premium
Quality
ROUTER BITS
STRAIGHT BITS
SINGLE FLUTE
SINGLE FLUTE
*
• Use End Cutting Inserts for Plunging and Trenching
*
*
*
*
*
*
*
*
Part No.
RS 1230 1/2
RS 12.730 1/2
RS 1430 1/2
RS 1630 1/2
RS 1640 1/2
RS 1640 16
RS 1830 1/2
RS 1930 1/2
RS 1940 1/2
RS 1940 16
RS 2030 1/2
RS 2040 1/2
RS 2040 16
D
12
12.7
14
16
16
16
18
19
19
19
20
20
20
B
30
30
30
30
40
40
30
30
40
40
30
40
40
SINGLE FLUTE
*
*
• Use End Cutting Inserts for Plunging and Trenching
*
Part No.
RSP 12.7 30 1/2
RSP 16 40 1/2
D
12.7
16
L
75
75
75
85
85
85
85
85
85
85
85
85
85
d
12.7
12.7
12.7
12.7
12.7
16
12.7
12.7
12.7
16
12.7
12.7
16
INSERT NO.
PL 29.5 9 1.5
PL 29.5 9 1.5
PL 29.5 9 1.5
PL 29.5 12 1.5
PL 39.5 12 1.5
PL 39.5 12 1.5
PL 29.5 12 1.5
PL 29.5 12 1.5
PL 39.5 12 1.5
PL 39.5 12 1.5
PL 29.5 12 1.5
PL 39.5 12 1.5
PL 39.5 12 1.5
B
30
40
L
85
90
d
12.7
12.7
INSERT NO.
PL 29.5 9 1.5 EC
PL 29.5 9 1.5 EC
These tools will be deleted from the range once current
stocks are sold
22o BEVEL TRIMMING BITS
TWO FLUTES
TWO FLUTE
Part No.
D
B
L
d
INSERT NO.
R 22 B
R 22 B 1/2
19
19
12
12
54
58
6.35
12.7
PL 12 12 1.5
PL 12 12 1.5
45o BEVEL TRIMMING BITS
TWO FLUTES
TWO FLUTE
Part No.
D
B
L
d
INSERT NO.
R 45 B
R 45 B 1/2
19
19
12
12
54
58
6.35
12.7
PL 12 12 1.5
PL 12 12 1.5
VEE GROOVE BITS
SINGLE FLUTE
B
D
d
Part No.
D
B
L
d
INSERT NO.
RVG 91 1/2
18
12
60
12.7
PL 12 12 1.5
Cuts included angle of 91˚
L
B
d
D
L
Part No.
D
B
L
d
RVG 90 1/2
25
15.5
68
12.7
INSERT NO.
PLR 20 12
Cuts included angle of 90˚
40
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
Premium
Quality
SURFACE PLANERS
d
d
ROUTER BITS
L
L
FOR USE ONLY IN SECURELY
MOUNTED MACHINES.
CARE SHOULD BE TAKEN WITH
SPEED SELECTION.
B
B
D
D
3 Flute
4 Flute
Part No.
D
B
L
d
INSERT NO.
Part No.
D
B
L
d
INSERT NO.
R3 5512 1/2
55
12
78
12.7
PL 12 12 1.5
R4 8012 16M
R4 8012 20M
80
80
12
12
83
83
16
20
PL 12 12 1.5
PL 12 12 1.5
M U LT I - S H A P E P R O F I L E B I T
Use the standard range of shapes available or custom design your own shape.
INSERTS
PART No.
RMST 201
RMST 202
RMST 203
RMST 204
RMST 205
RMST 206
RMST 207
B
B1
B2
R chmf D
mm mm mm mm
mm
9.52
9.52
5.9
3.5
5.9
6.6
5.0
6.6
7.0
3.5
7.0
10.45 6.01
35˚ 8.58
5.0
2.5
6.6
5.5
11.68
6.7
(Blank Insert onto which a
profile can be ground NB.
These blanks will not fit onto
the body until ground)
Tip Thickness 2mm
TOOL (WITHOUT INSERTS)
D
mm
30
PART No.
RMS 200 1/2
B
mm
20
L
mm
75
Replacement Insert – 20 x 12 x 2.0
Replacement Screw – M4
Replacement Torx Key – T15
d
mm
12.7
d
R
R
R
R
1.00
B
B
D
RMST 301
B
1
B2
B
D
D
D
RMST 302
RMST 303
RMST 304
C
INSERTS
B
B1
B2
R chmf
mm mm mm mm
RMST 301 11.8
7
RMST 302 11
23.35
RMST 303
19.25 13.61
45˚
RMST 304 11
5
PART No.
B
D
D
mm
11.8
13.47
13.61
13.2
PART No.
RMS 300 1/2
RMS 300 16
20
RMSTB 30202
TOOL (WITHOUT INSERTS)
D
mm
46
46
30
(Blank Insert onto which a
profile can be ground NB.
These blanks will not fit onto
the body until ground)
Tip Thickness 2mm
B
mm
30
30
L
mm
90
90
d
mm
1/2
16
Replacement Insert – 30 x 20 x 2.0
Replacement Screw – M4
Replacement Torx Key – T15
41
Premium
Quality
ROUTER BITS
INDEXABLE INSERTS
Part No.
35º
ØD
W
PL 7.65 12 1.5
PL 9 12 1.5
PL 15 12 1.5
PL 20 12 1.5
T
L
L
7.65
9
15
20
Part No.
PL 25 12 1.5
PL 30 12 1.5
PL 40 12 1.5
PL 50 12 1.5
PL 60 12 1.5
PL 80 12 2.2
PL 100 12 2.2
35º
W
C
L
=
ØD
=
T
W
35º
ØD
Part No.
PL 12 12 1.5
T
L
30º
W
Part No.
ØD
PL 14 14 1.5
PL 14 14 2
T
L
Part No.
T
L
PL 19.5 12 1.5 EC
15º
Part No.
PL 29.5 9 1.5 EC
PL 29.5 12 1.5 EC
PL 39.5 9 1.5 EC
PL 39.5 12 1.5 EC
PL 49.5 12 1.5 EC
PL 59.5 12 1.5 EC
35º
W
C
L
=
ØD
=
T
W
35º
ØD
Part No.
C
L
Dimensions, mm
T
A
1.5
2
1.5
2
1.5
2
1.5
2
Dimensions, mm
T
A
1.5
2
1.5
2
1.5
2
1.5
2
1.5
2
2.2
2
2.2
2
W
12
12
12
12
12
13
13
ØD
4
4
4
4
ØD
4
4
4
4
4
4
4
C
14
14
26
26
26
26
26
L
12
W
12
Dimensions, mm
T
A
1.5
4
ØD
4
L
14
14
W
14
14
Dimensions, mm
T
A
1.2
4
2
4
ØD
8.5
6.5
L
19.5
W
12
Dimensions, mm
T
A
1.5
4
ØD
4
35º
ØD
W
L
25
30
40
50
60
80
100
W
12
12
12
12
T
PL 50 12 1.7 EC
L
29.5
29.5
39.5
39.5
49.5
59.5
W
9
12
9
12
12
12
Dimensions, mm
T
A
1.5
4
1.5
4
1.5
4
1.5
4
1.5
4
1.5
4
ØD
4
4
4
4
4
4
C
14
14
26
26
26
26
L
50
W
12
Dimensions, mm
T
A
1.7
4
ØD
4
C
37
20º
35º
ØD
W
Part No.
PLR 20 12
T
L
L
20
W
12
Dimensions, mm
T
A
1.5
2
ØD
4
L
n/a
W
22
Dimensions, mm
T
A
2
3
ØD
6.5
L
18
W
18
Dimensions, mm
T
A
1.95
4
ØD
10.3
30º
ØD
Part No.
PLT 22
T
W
Part No.
ØD
W
PLS 18
EC = End Cut
T
L
A = Number of cutting edges
REPLACEABLE INSERTS & PARTS FOR REPLACEMENT INSERT ROUTER BITS
REPLACEMENT PARTS
DESCRIPTION
Torx Key
Torx Key
Torx Head Screw
Torx Head Screw
Torx Head Screw
Bearing Screw
Replacement Bearing
Replacement Bearing
NOTE
Part No.
All bits prefix RSP
All other bits
All bits prefix R & RV
All bits prefix RS
All bits prefix RSP
All bits
All bits prefix R
All bits prefix RV
T10
T15
M4
M3.5
M3
M4
TB5
TB 4 or TB 20
or TB 18
When ordering replacement blades:
State
• Insert Number
eg. PL 30 12 1.5
42
•
All straight Router Bits without bearings or
with a bearing on the shank, are supplied
with end cutting inserts.
• Inserts can be removed and replaced
without removing cutter from the routing
machine.
CAUTION
• DO NOT OVERTIGHTEN TORX SCREWS
• When tightening screws, ensure that
inserts are held firmly into pocket for
correct location
• Ensure tip seating is free of burs and resin
when changing blades.
Quantities of
10 supplied in
a protective
plastic box.
Premium
Quality
D I A M O N D C O AT E D R O U T E R B I T S
Ideal for use in a wide range of materials such as marble, granite, fibreglass, ceramics, solid surface materials and some types
of plastics, glass and graphite. (*Special shapes and sizes available on request)
ROUNDING OVER
BITS
45º CHAMFER
BIT
PART No.
A
B
C
RADIUS
BEARING
SHANK
DIACR 3.5 MB 1/2
DIACR 6 MB 1/2
DIACR 10 MB 1/2
DIACR 12 MB 1/2
27
30
37
43
8
14
16
18
65
70
75
75
3.5
6
10
12
TBRS 40
TBRS 40
TBRS 40
TBRS 40
1/2
1/2
1/2
1/2
45º INVERTED
CHAMFER BIT
PART No.
A
B
C
BEARING
SHANK
DIACR 45 B 1/2
30
14
75
TBRS 41
1/2
ROUTER BITS
DIAMOND COATED EDGE FORMING BITS
TRIM BIT
PART No.
A
B
C
BEARING
SHANK
DIACR 135 B 1/2
30
17
75
TBRS 42
1/2
PART No.
DIACR 12730 B 1/2
A
B
C
BEARING
SHANK
12.7
30
70
TBRS 43
1/2
REPLACEMENT BEARINGS (RUBBER SEALED)
PART No.
OD mm
ID mm
B mm
TBRS 40
TBRS 41
TBRS 42
TBRS 43
19
16
30
12.7
5
5
10
4.8
4
6
9
4.8
DIAMOND GRINDING CUP WHEELS
FOR USE ON ANGLE GRINDERS (GUARDING RECOMMENDED)
DOUBLE GRINDING
CUP WHEEL
SEGMENTED TURBO
CUP WHEEL
Ideal for finish grinding concrete, granite, bricks and stone.
The double row of diamond surface ensures smooth
operation and long life.
For rough surface grinding. Suitable for grinding
concrete, brick , stone and most masonry
applications .
PART No.
DIAMETER
ARBOR
DDGC 458
DDGC 478
4” (105mm)
4” (105mm)
5/8
7/8
PART No.
DIAMETER
ARBOR
DSTGC 458
DSTGC 478
4” (105mm)
4” (105mm)
5/8
7/8
43
Premium
Quality
ROUTER BITS
DIAMOND TIPPED TOOLS (PCD)
STRAIGHT BITS
STRAIGHT BITS
For routing panels of raw and coated hardboard, MDF and
multi-layer panels
High Performance Tools For routing panels of raw and
coated board, MDF and multi-layer panels
• Open flutes provide for faster and easier chip clearance.
• Shear angle Tips
• Increased feeds
• Low noise
• Excellent finish
• Polished Diamond
HIGH PERFORMANCE (HP)
• Shear angle Tips
• Polished Diamond
• Open flutes provide for faster and easier chip clearance.
Part No. (right hand) Part No. (left hand)
DIATR 10M 12
DIATR 12M 12
DIATR XE 12M 12
DIATR 12M 25
DIATR 14M 16
DIATR 16M 16
DIATR XE 16M 16
DIATR XXE 16M 16
DIATR 16M 20
DIATR XE 16M 20
DIATR XXE 16M 20
DIATR 18M 16
DIATR XE 18M 16
DIATR 18M 20
DIATR XE 18M 20
DIATR XXE 18M 20
DIATR 18M 25
DIATR XE 18M 25
DIATR XXE 18M 25
DIATR 20M 20
DIATR XE 20M 20
DIATR XXE 20M 20
DIATR XXXE 20M 20
DIATR 20M 25
DIATR XE 20M 25
DIATR XXE 20M 25
DIATR XXXE 20M 25
DIATL 10M 12
DIATL 12M 12
DIATL XE 12M 12
DIATL 12M 25
DIATL 14M 16
DIATL 16M 16
DIATL XE 16M 16
DIATL XXE 16M 16
DIATL 16M 20
DIATL XE 16M 20
DIATL XXE 16M 20
DIATL 18M 16
DIATL XE 18M 16
DIATL 18M 20
DIATL XE 18M 20
DIATL XXE 18M 20
DIATL 18M 25
DIATL XE 18M 25
DIATL XXE 18M 25
DIATL 20M 20
DIATL XE 20M 20
DIATL XXE 20M 20
DIATL XXXE 20M 20
DIATL 20M 25
DIATL XE 20M 25
DIATL XXE 20M 25
DIATL XXXE 20M 25
D
mm
10
12
12
12
14
16
16
16
16
16
16
18
18
18
18
18
18
18
18
20
20
20
20
20
20
20
20
L1
d
mm mm
25 12
25 12
35 12
25 25
25 16
25 16
35 16
43 16
25 20
35 20
43 20
25 16
35 16
25 20
35 20
43 20
25 25
35 25
43 25
25 20
35 20
43 20
52 20
25 25
35 25
43 25
52 25
L2
mm
40
40
40
55
50
50
50
50
50
50
50
50
50
50
50
50
55
55
55
50
50
50
50
55
55
55
55
L3
mm
75
75
85
75
85
85
95
103
85
95
103
85
96
85
96
103
90
100
108
85
95
103
112
90
100
108
117
Z
mm
3+1
3+1
4+1
3+1
3+1
3+1
4+1
5+1
3+1
4+1
5+1
3+1
4+1
3+1
4+1
5+1
3+1
4+1
5+1
3+1
4+1
5+1
6+1
3+1
4+1
5+1
6+1
D
mm
18
18
18
18
20
20
20
20
20
20
Part No.(right hand) Part No.(left hand)
DIATR HP 18M 20
DIATR XEHP 18M 20
DIATR HP 18M 25
DIATR XEHP 18M 25
DIATR HP 20M 20
DIATR XEHP 20M 20
DIATR XXEHP 20M 20
DIATR HP 20M 25
DIATR XEHP 20M 25
DIATR XXEHP 20M 25
DIATL HP 18M 20
DIATL XEHP 18M 20
DIATL HP 18M 25
DIATL XEHP 18M 25
DIATL HP 20M 20
DIATL XEHP 20M 20
DIATL XXEHP 20M 20
DIATL HP 20M 25
DIATL XEHP 20M 25
DIATL XXEHP 20M 25
Ideal for CNC Routing and contouring MDF, HDF, Plywood,
sandwich panels (with or without veneer, paper or plastic
coatings) Full carbide bodies up to 12mm diameter
L2
mm
50
50
55
55
50
50
50
55
55
55
L3
mm
85
95
90
100
85
95
110
90
100
115
Z
mm
6+1
7+1
6+1
7+1
6+1
7+1
9+1
6+1
7+1
9+1
STRAIGHT BITS
EXTREME PERFORMANCE (XP)
Helical pattern router bit for raw and coated panels, MDF,
Multi layer panels, etc.
• For use in CNC machines
• Thick tips provide for multiple resharpens
• Two way rotation
• Fast chip discharge
• Low Noise
• High feed rates
D
mm
20
20
20
25
25
25
25
25
Part No.(right hand) Part No.(left hand)
STRAIGHT FLUTE
L1
d
mm mm
28 20
35 20
28 25
35 25
28 20
35 20
48 20
28 25
35 25
48 25
DIATR XP 20M 20
DIATR XP 20M 25
DIATR XE XP 20M 25
DIATR XP 25M 20
DIATR XP 25M 25
DIATR XE XP 25M 25
DIATR XXE XP 25M 25
DIATR XXXE XP 25M 25
DIATL XP 20M 20
DIATL XP 20M 25
DIATL XE XP 20M 25
DIATL XP 25M 20
DIATL XP 25M 25
DIATL XE XP 25M 25
DIATL XXE XP 25M 25
DIATL XXXE XP 25M 25
L1
d
mm mm
23 20
28 25
35 25
23 20
23 25
35 25
45 25
55 25
L2
mm
50
55
55
50
55
55
55
55
L3
Z
mm mm
83 5+1
93 7+1
100 8+1
83 5+1
88 5+1
100 8+1
110 10+1
120 13+1
DIAMOND (PCD) TIPPED FLUSH
TRIMMING BIT
Part No.(right hand)
DIATR S 6M 12
DIATR S 8M 12
DIATR S 10M 12
DIATR SX 10M 12
DIATR S 12M 12
DIATR S 16M 16
DIATR SXE 16M 16
44
Part No.(left hand)
DIATL S 6M 12
DIATL S 8M 12
DIATL S 10M 12
DIATL SX 10M 12
DIATL S 12M 12
DIATL S 16M 16
DIATL SXE 16M 16
D
6
8
10
10
12
16
16
L1
12
12
12
22
25
25
35
d
12
12
12
12
12
16
16
L2
40
40
40
40
40
50
50
L3
70
70
70
70
70
85
95
Z
1+1
1+1
1+1
2+1
1+1
2+1
2+1
Made with Polycrystalline Diamond
(PCD) Tips. PCD Tips keep a sharp
cutting edge many times longer than
tungsten carbide tips. These bits are
excellent for extremely hard
laminates.
NEW
PART No.
DIATR S 8012 B
DIATR S 8016 B
DIATR S 8016 B 1/2
A
in.
3/8
1/2
1/2
B
mm
9.5
12.7
12.7
in
1/2
5/8
5/8
mm
12.7
15.9
15.9
C
in
2-3/32
2-7/32
2-13/16
mm
53.2
56.4
71.4
Bearing
No.
TB9
TB11
TB11
Premium
Quality
DIAMOND TIPPED TOOLS (PCD)
Wood boring Drills - Flat bottom (10mm shank with flat)
For use on point-to-point boring and multi spindle machines
Raw, Melamine and MDF panels
L1
R
d
D
D1
ROUTER BITS
WOOD DRILLS
PROFILE BITS
As well as the standard range of bits below, custom
made bits can also be manufactured. Please provide
specifications for pricing and availability.
L2
DIAT WD 5 R 57
DIAT WD 5 R 70
DIAT WD 6 R 57
DIAT WD 6 R 70
DIAT WD 8 R 57
DIAT WD 8 R 70
DIAT WD 10 R 57
DIAT WD 10 R 70
L3
ROUNDING OVER BITS
PART No.
DIAT RO 6MR 16
DIAT RO 10MR 16
DIAT RO 12MR 16
D
mm
24
32
36
D1
mm
12
12
12
R
mm
6
10
12
L1
mm
11
15
17
d
mm
16
16
16
L2
mm
45
45
45
L3
mm
50
70
72
L1
Part No.(left hand)
DIAT WD 5 L 57
DIAT WD 5 L 70
DIAT WD 6 L 57
DIAT WD 6 L 70
DIAT WD 8 L 57
DIAT WD 8 L 70
DIAT WD 10 L 57
DIAT WD 10 L 70
D
5
5
6
6
8
8
10
10
L1
32
45
32
45
32
45
32
45
d
10
10
10
10
10
10
10
10
L2
25
25
25
25
25
25
25
25
L3
57
70
57
70
57
70
57
70
Z
1
1
1
1
1
1
1
1
WOOD DRILLS
B2
B1
Through Drills (10mm shank with flat)
For multi-spindle machines
Makes through holes in Raw, Melamine and MDF panels
D
d
L2
L3
VEE GROOVE/CHAMFER BIT
PART No.
DIAT VGC 45D 16
B2
L1
d
D Angle B1
mm mm mm mm mm mm
22.63 45˚
16 11.31 16.31 16
L2
mm
45
L3
mm
71.3
HINGE BORING DRILLS
Hinge boring Drills (10mm shank with flat)
For use on point-to-point boring and line machines
Raw, Melamine and MDF panels
DIAT WDT 5 R 57
DIAT WDT 5 R 70
DIAT WDT 6 R 57
DIAT WDT 6 R 70
DIAT WDT 8 R 57
DIAT WDT 8 R 70
DIAT WDT 10 R 57
DIAT WDT 10 R 70
Part No.(left hand)
DIAT WDT 5 L 57
DIAT WDT 5 L 70
DIAT WDT 6 L 57
DIAT WDT 6 L 70
DIAT WDT 8 L 57
DIAT WDT 8 L 70
DIAT WDT 10 L 57
DIAT WDT 10 L 70
D
5
5
6
6
8
8
10
10
L1
32
45
32
45
32
45
32
45
d
10
10
10
10
10
10
10
10
L2
25
25
25
25
25
25
25
25
L3
57
70
57
70
57
70
57
70
Z
1
1
1
1
1
1
1
1
A full range of Diamond Tipped (PCD)
Sawblades, Scorers, Hogging Units, Anti-Chip
Finishing Tool Heads and Grooving Cutter
Blocks is available on request.
DIAT WD 15 R 57
DIAT WD 30 R 57
DIAT WD 30 R 70
DIAT WD 35 R 57
DIAT WD 35 R 70
DIAT WD 40 R 57
DIAT WD 40 R 70
Part No.(left hand)
DIAT WD 15 L 57
DIAT WD 30 L 57
DIAT WD 30 L 70
DIAT WD 35 L 57
DIAT WD 35 L 70
DIAT WD 40 L 57
DIAT WD 40 L 70
D
15
30
30
35
35
40
40
L1
32
32
45
32
45
32
45
d
10
10
10
10
10
10
10
L2
25
25
25
25
25
25
25
L3
57
57
70
57
70
57
70
Z
4
4
4
4
4
4
4
45
TRADE BLADES
TRADE BLADES
Premium Quality Saw Blades
for Portable, Radial Arm and Bench Machines
These precision, hardened plate blades have thick micrograin carbide tips designed to give optimum performance in a wide ranch of materials.
Al
w
Al ay
wa s e
y
Al s w nsu
wa ea re
op ys r ey ade
er fol e, qu
at lo
in w han ate
g
an mac d & gua
r
d
sa hine hea ding
r
fe
ty ma ing is i
in nu pr n p
st
ru fact otec lac
ct ur ti e.
o
io
ns ers n.
.
WOOD CUTTING - STANDARD KERF
Part No.
M6 24T
M6 30T
Diameter
160mm
160mm
Teeth
24
30
Kerf
Grind
2.5mm Alt. Bev.
2.5mm Alt. Bev.
M7 20T
M7 30T
M7 40T
M184 20T
M184 30T
M184 40T
178mm
178mm
178mm
184mm
184mm
184mm
20
30
40
20
30
40
2.6mm
2.6mm
2.6mm
2.6mm
2.6mm
2.6mm
Alt. Bev.
Alt. Bev.
Alt. Bev.
Alt. Bev.
Alt. Bev.
Alt. Bev.
M8 24T
M8 30T
M8 40T
M8 60T
M210 24T
M210 30T
M210 40T
M210 60T
203mm
203mm
203mm
203mm
210mm
210mm
210mm
210mm
24
30
40
60
24
30
40
60
2.8mm
2.8mm
2.8mm
2.8mm
2.8mm
2.8mm
2.8mm
2.8mm
Alt. Bev.
Alt. Bev.
Alt. Bev.
Alt. Bev.
Alt. Bev.
Alt. Bev.
Alt. Bev.
Alt. Bev.
WOOD CUTTING - THIN KERF
Part No.
MTHIN 6 24T
Diameter
160mm
Teeth
24
Kerf
Grind
1.7mm Alt. Bev.
MTHIN 6 40T
160mm
40
1.7mm Alt. Bev.
MTHIN 184 20T
MTHIN 184 30T
MTHIN 184 40T
MTHIN 210 30T
MTHIN 210 40T
184mm
184mm
184mm
210mm
210mm
20
30
40
30
40
ALUMINIUM CUTTING - NEG RAKE
Part No.
Diameter
Teeth
Kerf
Grind
MNF160 60T
160mm
60
2.2mm Trip. Chip.
MNF184 60T
184mm
60
2.2mm Trip. Chip.
MNF210 80T
210mm
80
2.8mm Trip. Chip.
MNF216 60T
MNF216 80T
216mm
216mm
60
80
2.7mm Trip. Chip.
2.7mm Trip. Chip.
MNF9 80T
235mm
80
2.8mm Trip. Chip.
MNF10 80T
MNF10 100T
250mm
250mm
80
100
3.0mm Trip. Chip.
2.6mm Trip. Chip.
MNF262 80T
262mm
80
3.1mm Trip. Chip.
MNF300 100T
300mm
100
2.8mm Trip. Chip.
1.7mm Alt. Bev.
1.7mm Alt. Bev.
1.7mm Alt. Bev.
2.2mm Alt. Bev.
2.2mm Alt. Bev.
*To Suit Elu Machines, Negative Rake
*MN216 24T
216mm
24
2.8mm Alt. Bev.
*MN216 48T
216mm
48
2.8mm Alt. Bev.
M9 24T
M9 30T
M9 40T
M9 60T
235mm
235mm
235mm
235mm
24
30
40
60
3.0mm
3.0mm
3.0mm
3.0mm
M10 40T
M10 60T
M10 72T
250mm
250mm
250mm
40
60
72
3.0mm Alt. Bev.
3.0mm Alt. Bev.
3.0mm Alt. Bev.
M262 60T
262mm
60
3.0mm Alt. Bev.
M12 30T
M12 72T
300mm
300mm
30
72
3.2mm Alt. Bev.
3.2mm Alt. Bev.
When ordering - please specify
part no and add bore size
eg: 9 1/4" x 60 x 25 mm = M9
60T x 25mm
Variations to common bore
sizes are supplied on request at
no extra charge.
46
Alt. Bev.
Alt. Bev.
Alt. Bev.
Alt. Bev.
MTHIN 235 30T
MTHIN 235 40T
235mm
235mm
30
40
2.4mm Alt. Bev.
2.4mm Alt. Bev.
MTHIN 250 100T
250mm
100
2.4mm Alt. Bev.
MTHIN 305 60T
MTHIN 305 80T
305mm
305mm
60
80
2.8mm Alt. Bev
2.8mm Alt. Bev
METAL CUTTING BLADES
MMET 102 20T
MMET 115 20T
MMET 125 20T
MMET 150 30T
MMET 184 36T
MMET 210 40T
MMET 230 48T
MMET 250 60T
MMET 305 60T
102mm
115mm
125mm
150mm
184mm
210mm
230mm
250mm
305mm
20
20
20
30
36
40
48
60
60
2.2
2.2
2.2
2.2
2.2
2.6
2.6
2.6
2.6
Flat Top Grind
Flat Top Grind
Flat Top Grind
Flat Top Grind
Flat Top Grind
Flat Top Grind
Flat Top Grind
Flat Top Grind
Flat Top Grind
A full range of precision, turned saw bushes is
available ex-stock.
Odd size bushes can be manufactured to suit
most requirements.
Metal cutting blades are for use only on power
saws equipped with adequate guarding that
meets Australian standards. Always follow the
operating & safety instructions provided by the
manufacturer of the machine. Always hold the
machine with both hands. Do not use for side
grinding. Wear eye, ear, respiratory & hand
protection.
CARB-I-TOOL BENCH SAW BLADES
are made to exacting European standards and cover a wide range of applications. These hardened
plate blades have superior quality micro-grain carbide teeth that enable the sharp cutting edge
to be maintained longer between sharpenings
Al
w
Al ay
wa s e
y
Al s w nsu
wa ea re
op ys r ey ade
er fol e, qu
at lo
in w han ate
g
an mac d & gua
r
d
sa hine hea ding
r
fe
ty ma ing is i
in nu pr n p
st
ru fact otec lac
ct ur ti e.
o
io
ns ers n.
.
Application
Part No.
PRECISION L5BA10N
CUTTING
"
Specially
"
intended for
"
sawing thin
"
hard material
"
eg: bakelite, LPQ5BA10N
plywood &
L5BA10N
plexiglass.
"
Chip free finish
Material
L5BA10T2
1-10mm
Application
PRECISION
CROSSCUT
For cross
cutting small
sized timber,
chipboard,
etc. materials
2-20mm thick
Diam.
Teeth
100-4"
28
150-6"
48
180-7"
56
200-8"
64
225-9"
68
250-10"
80
300-12"
96
350-14" 104
400-16" 120
450-18" 144
150-6"
48
180-7"
56
200-8"
64
225-9"
68
250-10"
80
56
L5BA10T3 180-7"
200-8"
64
225-9"
68
250-10"
80
300-12"
96
Kerf
2.5
2.2
2.5
2.8
2.8
2.8
3.2
3.5
4.0
4.0
1.8
2.0
2.0
2.2
2.2
1.8
1.8
2.0
2.0
2.2
Part No.
L5BA14N
"
"
"
"
LPQ5BA14N
LPQ5BA14N
LPQ5BA14N
L5BA14N
"
"
Kerf
2.2
2.2
2.5
2.5
2.8
3.2
3.2
3.5
4.0
4.0
4.0
Diam.
Teeth
125-5"
28
150-6"
32
180-7"
40
200-8"
44
225-9"
48
250-10"
60
300-12"
72
350-14"
80
400-16"
88
450-18"
96
500-20" 112
Application Part No.
Diam.
PRECISION LPQ5EA10N 300-12"
CUTTING
Positive rake. LPQ5EA14N 300-12"
Triple chip.
Teeth
96
Kerf
3.2
72
3.2
Application
Part No.
Diam.
Teeth
40
CROSSCUT L10BA19N 250-10"
For cutting
300-12"
48
small to medium
350-14"
60
size timber,
400-16"
68
chipboard etc.
450-18"
72
materials 6-40mm
500-20"
80
thick.
CROSSCUT L10BA30N
Cross cutting
medium to large
size timber
15-90mm thick
Diam.
Teeth
250-10"
24
300-12"
32
350-14"
36
400-16"
40
450-18"
48
500-20"
52
Kerf
2.8
3.2
3.5
4.0
4.0
4.0
Application
Diam.
Teeth
250-10"
40
300-12"
48
350-14"
60
400-16"
68
450-18"
72
500-20"
80
Kerf
2.8
3.2
3.5
4.0
4.0
4.0
Part No.
L20BA30N
COMBINATION RIP
AND CROSS CUT
Materials 15-90mm
thick.
Diam.
Teeth
250-10"
24
300-12"
32
350-14"
36
400-16"
40
450-18"
48
500-20"
52
Kerf
2.8
3.2
3.5
4.0
4.0
4.0
RIP SAWS L20BA39N
For ripping
larger timbers
20-125mm
thick
Diam.
Teeth
250-10"
20
300-12"
24
350-14"
28
400-16"
32
450-18"
36
500-20"
40
560-22"
44
610-24"
48
630-26"
48
Kerf
2.8
3.2
3.5
4.0
4.0
4.0
4.5
4.5
4.5
RADIAL
LN2BA30N
ARM
Negative hook
angle for cross
cutting timber
in pendium or pull
across cross cut saws
Diam.
Teeth
250-10"
24
300-12"
30
350-14"
36
400-16"
40
Kerf
2.8
3.1
3.5
4.0
Part No.
L20BA19N
COMBINATION
RIP AND CROSS CUT
Materials 6-40mm
thick.
Application
Kerf
2.8
3.2
3.5
4.0
4.0
4.0
Diam.
Teeth
40
SPECIAL
L10BA30N 380
72
TABLE
L5BA16N 380
SAW BLADES 380mm (15") DIAMETER
Part No.
Bore Size
Diam.
SCORING SAWS SOLID CONICAL
20mm bore
105
LSOLID
22mm bore
105
22mm bore
120
20mm bore
120
45mm bore
125
Teeth
Part No.
Diam.
SCORING SAWS SPLIT
100
LSPLIT
"
100
120
LPQSPLIT
LPQSPLIT
120
Bore Size
Teeth
20mm bore
22mm bore
22mm bore
20mm bore
2x12
2x12
2x12
2x12
16
16
24
24
20
Application
Part No.
Diam.
Teeth
SAWS FOR NON FERROUS
METAL CUTTING
36
For sawing LN2EAM14 150-6"
aluminium and
180-7"
40
non-ferrous
200-8"
44
metals
225-9"
48
3-12mm
250-10"
56
thick.
275-11"
64
Negative rake.
300-12"
68
Triple chip.
350-14"
80
400-16"
88
450-18"
96
44
For sawing LN2EAM10 150-6"
aluminium
180-7"
52
and non-ferrous
200-8"
60
metals up to
225-9"
64
6mm thick.
250-10"
80
Negative rake.
275-11"
84
Triple chip.
300-12"
96
350-14" 104
400-16" 120
450-18" 132
BENCH SAW BLADES
BENCH SAW BLADES
Kerf
2.5
2.8
2.8
2.8
3.1
3.1
3.5
4.0
4.5
4.5
2.5
2.8
2.8
2.8
2.8
3.2
3.2
3.5
4.0
4.0
When ordering please specify part no.,
diameter and add bore size
Eg: L5BA10N 250 x 80T x 25mm bore
"Made to Order" Sawblades are also
available.
Price and delivery on application.
Kerf
4.0
4.0
All blades available in standard bore sizes.
Variation in bore size available at no extra
charge.
BA = Alternate Bevel
EA = Triple Chip
BLADE/SCORER PACKAGES
Part No.
Description
LPQPKGBA
LPQPKGBA
LPQPKGEA
LPQPKGEA
72
72
72
72
20
22
20
22
300 x 72T AB + 120 x 24 x 20 Split Scorer
300 x 72T Trip. Chip + 120 x 24 x 20 Split Scorer
LPQPKGBA
LPQPKGBA
LPQPKGEA
LPQPKGEA
96
96
96
96
20
22
20
22
47
TRADE BLADES
TRADE BLADES
CEMENT SHEET CUTTING SAW BLADES
METAL CUTTING SAW BLADE
Premium Trade Blade Quality, Diamond (PCD) Tipped, Heat Treated
Blades for cutting cement sheet and other compressed, highly abrasive
materials
Specifically Designed to Cut Corrugated Iron, Acrylics and Metals
Fits most 185mm Hand Held Portable Metal Cutting Machines
NEW
NEW
PART No.
MPCD125 4T 20mm
MPCD160 4T 20mm
MPCD180 4T 20mm
MPCD250 6T 30mm
MPCD300 8T 30mm
Diameter
125mm
160mm
180mm
250mm
300mm
Teeth
Kerf
Bore
4
4
4
6
8
2.4mm
2.4mm
2.4mm
3.2mm
3.2mm
20mm
20mm
20mm
30mm
30mm
To be used only on power saws with adequate guarding that meets
Australian standards. Always follow the operating & safety instructions
provided by the manufacturer of the machine on which the saw blade is
to be used. Wear eye, ear, respiratory & hand protection.
PART No.
Teeth
Kerf
Bore
48T
2.2mm
20mm
MMET185 48T 20mm
Metal cutting blades are for use only on power saws equipped
with adequate guarding that meets Australian standards.
Always follow the operating & safety instructions provided by
the manufacturer of the machine.
Always hold the machine with both hands.
Do not use for side grinding. Wear eye, ear, respiratory & hand
protection.
HOLE SAWS
CARBIDE TIPPED HOLESAWS
FOR WOOD
For use on a range of timber applications.
Holesaws up to 30mm have 1/2-20 UNF internal thread and no driving pins.
PART No.
Holesaws 32mm and over have 5/8-18 UNF internal thread and driving pins.
A
B
FIXED ARBOR
QUICK CHANGE
VAX1 - For 19-30mm diam. holesaws VAX3/8 - For 32-63mm diam. holesaws
VAX2 - For 32-63mm diam. holesaws VAX1/2 - For 32-102mm diam. holesaws
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
THW
19
25
30
32
35
38
40
44
51
54
57
63
76
102
A
mm
19
25
30
32
35
38
40
44
51
54
57
63
76
102
B
mm
54
54
54
59
59
59
59
59
59
59
59
59
59
59
No. of
Teeth
1
1
2
2
2
2
2
2
3
3
3
3
4
5
C A R B I D E T I P P E D H O L E S AW S
F O R S TA I N L E S S S T E E L F I B R E G L A S S A N D O T H E R A B R A S I V E M AT E R I A L S
PART No.
CARBIDE TIPPED
48
FIXED ARBOR
VA1 Used on V16 - V30 cutters
VA2 Used on V32 - V75 cutters
QUICK CHANGE ARBOR
VA 1/2 (1/2” SHANK) Used on V32 - V75 cutters
VA 3/8 (3/8” SHANK) Used on V32 - V75 cutters
V16
V19
V20
V21
V22
V25
V28
V30
V32
V35
V38
V40
V42
V44
V50
V55
V60
V65
V70
V75
A
mm
16
19
20
21
22
25
28
30
32
35
38
40
42
44
50
55
60
65
70
75
B
mm
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
No. of
Teeth
3
4
4
4
5
5
6
6
7
7
8
8
8
9
10
11
12
13
14
15
PROFESSIONAL RANGE
A range of superior quality hand saws made in Sheffield by skilled craftsmen calling on centuries of experience and tradition.
The range includes Panel and Tenon saws, Rip saw, Gents and Flexible Flush Cutting saws.
PART No.
S95 20 10ppi
S95 22 8ppi
S95 22 10ppi
S95 24 6ppi
S95 24 7ppi
S95 24 8ppi
S95 26 5ppi (RIP)
S95 26 6ppi
S95 26 7ppi
Length
20"
22"
22"
24"
24"
24"
26
26"
26"
Points Per Inch
10
8
10
6
7
8
5
6
7
S95 Handsaw
The blade is made from Allow Spring Steel, taper ground
with a skew back giving effortless cutting and good balance,
attractively finished with a Beech handle.
HAND
SAWS
Quality
HAND SAWS
Spare handle - Part No S95 HANDLE
Spare Screws - Part No SSCREW
S52 - Tenon Saw
SDS819 Dovetail Saw
This Tenon Saw has a high grade Alloy Steel 3," deep blade
with brass back, attractively finished with a Beech handle.
A brass backed dovetail saw with an Alloy Steel
blade and Beech handle.
PART No.
Length Points Per Inch
S52 8 15ppi
8"
15
S52 10 15ppi
10"
15
S52 12 15ppi
12"
15
S52 14 15ppi
14"
15
Length
8"
PART No.
SDS 819
Points Per Inch
20
Spare Handle - Part No SDS HANDLE
Spare Handle - Part No S52 HANDLE
Spare Screws - Part No S52 SSCREW
SGS8 Gents Saw
SFFC Flexible Flush Cutting Saw
The perfect partner to the range of Hand and Tenon saws.
An Alloy Steel blade with brass back.
Made from Flexible Alloy Steel with Beech handle. This saw cuts on
the pull stroke, ideal for cutting Dowels, etc
PART No.
SGS 8
Length
8"
Points Per Inch
20
PART No.
SFFC
Length
6"
Points Per Inch
20
Spare Handle - Part No SDS HANDLE
Hardpoint Saws
These heat treated, hardpoint saws give prolonged life, holding their edge up to 6 times as long as standard teeth.
Supplied with soft touch handle.
NEW
PART No.
S25 HP 22 7ppi
S25 Hand Saw
Length
22” 560mm
Points Per Inch
7
SWB-6 - Wallboard Saw
150mm cutting blade, 320mm long, ergonomic rubberised
handle and teeth sharpened on both sides. For use with
Plaster Board, plywood, etc.
S12 Tenon Saw
NEW
PART No.
S12 HP 12 12ppi
Length
12" 300mm
Points Per Inch
12
Coping Saw
170mm (6 3/4”) Blade Length, 125mm Deep. Includes 5
Blades for a range of Wood and Metal Cutting Applications
NEW
PART No.
SWB–6
Description
Wallboard Saw
PART No.
SCS55
Description
Coping Saw
49
HAND SAWS
HAND SAWS
FINE DETAIL SAW
DOUBLE PULL SAW
Ideal for Cutting Dowels, Dovetails and other Precision Work
178mm Blade
A Precision Hardpoint Double Edge Pull Saw with Triple
Ground Teeth
1 Edge 9 P.P.I
1 Edge 15 P.P.I
Popular for a wide range of cutting applications including
trimming thin sections from the bottom of doors and door
jambs.
PART No.
SFDS
PART No.
SDPS300
ALL PURPOSE MAGIC SAW
The versatile blade can be set in 3 directions which allows for easy cutting of shapes. Cuts aluminium, nails, pipes, wire, wood rubber, etc.
With the insertion of the flat saw blade the Magic Saw converts into a handy straight saw, ideal for small timber jobs. e.g. wall cuts, etc.
8 PIECE - MEDIUM GRIP
7 PIECE - SMALL GRIP
Contains:
Frame, 6 coping saw blades, 1 straight saw blade for wood.
Includes glass cutting tip, and glass & tile breaking grip
Contains:
Frame, 5 coping saw blades, 1 straight saw blade for wood.
PART No.
HA907
PART No.
HA105
REPLACEMENT COPING SAW BLADES
6” MAGIC SAW
Contains:
5 replacement coping saw blades,
For both HA907 & HA 105
Cuts Wood, Aluminium, Nails, Bolts, Plastic, Rubber and Stainless
Steel
PART No.
HA103-A
PART No.
HA500
REPLACEMENT WOOD BLADES
MAGIC SAW DIAMOND BLADE
Cuts Tile and Ceramics, Glass and Metal
PART No.
HA102
HA902
50
Description
Replacement Blade for HA105 Round Head
Replacement Blade for HA907 Square Head
PART No.
HA-DIA-S
CARB-I-TOOL JIGSAW BLADES
CARB-I-TOOL RECIPROCATING
SAW BLADES
Universal Fitting to 2 Per Card
5 Per Card
suit B&D, Skill,
Part No.
Part No.
Hitachi, and Ryobi Old
New Old
New
9 TPI Fast Clean Wood Cut
PU11C
24 TPI Fine Metal Cut
PU18A
13 TPI Medium Cut Metal
PU18B
13 TPI Medium Scroll Wood
PU19BO
10 TPI Extra Clean Wood Cut
PU1B
PU1D
8.5 TPI Non Ferrous Metal/Plas PU27D
6 TPI Extra Fast Cut Curves
PU44D
5 Assorted Handyman Mix
Carbide Coated 1 Blade/Card
SU30
(Cement, Laminates,Tiles, Light Brick)
Makita Fitting
3406-5
3411-5
3413-5
3409-5
3401-5
3403-5
3418-5
3405-5
SUX
3311-2
3301-2
3306-2
3305-2
3304-2
33185-2
3313-2
3309-2
5 Per Card
Part No.
Old New
SM1
SM2
SM3
SM4
SM5
SM7
SM8
SM9
SMX
3311-5
3301-5
3306-5
3305-5
3304-5
33185-5
3313-5
3309-5
SMX
A range of quality European made reciprocating saw blades
suitable for most applications
5 Per Card
CUTTING LENGTH
PART No.
4015-5
280mm / 6 T.P.I
4430-5
130mm / 10 T.P.I
4431-5
180mm / 10 T.P.I
4432VP-5
280mm / 10-14 T.P.I
4401-5
130mm / 18 T.P.I
4411-5
130mm / 14 T.P.I
4416-5
210mm / 14 T.P.I
4014-5
130mm / 6 T.P.I
4041-5
130mm / 10 T.P.I
4020-5
280mm / 3 T.P.I
4052-5
210mm 5-4 T.P.I
4080-5
130mm – GRIT
3322-1
2 Per Card
5 Per Card
Part No.
Part No.
Old
New Old
New
P101B
P101D
P111C
P118A
13 TPI Medium Metal Cut
P118B
13 TPI Medium Scroll Wood Cut P119BO
8.5 TPI Non Ferrous Metal/Plas
P127D
P244D
S130
3101-2
3103-2
3106-2
3111-2
3113-2
3109-2
3118-2
3105-2
3122-1
Small End Fitting
Suits Bosch, AEG,
Metabo
2 Per Card
Part No.
Old
New
9
24
13
13
10
6
8.5
6
P11C
P18A
P18B
P19BO
P1B
P1D
P27D
TPI Fast Clean Wood Cut
TPI Fine Metal Cut
TPI Medium Metal Cut
TPI Medium Scroll Wood Cut
TPI Extra Clean Wood Cut
TPI Fast Clean Wood Cut
TPI Non Ferrous Metal/Plas
TPI Extra Fast Cut Curves
SU11C
SU18A
SU18B
SU19BO
SU1B
SU1D
SU27D
SU44D
SUX
3422-1
2 Per Card
Part No.
Old New
PM1
PM2
PM3
PM4
PM5
8.5 TPI Non Ferrous Metal/Plas
PM7
13 TPI Medium Metal Cut
PM8
13 TPI Medium Scroll Wood Cut
PM9
SM30
Large End
Suits Bosch, AEG,
Metabo
3406-2
3411-2
3413-2
3409-2
3401-2
3403-2
3418-2
3405-2
3506-2
3511-2
3508-2
3509-2
3501-2
3503-2
3518-2
S101B
S101D
S111C
S118A
S118B
S119BO
S127D
S244D
SLX
3101-5
3103-5
3106-5
3111-5
3113-5
3109-5
3118-5
3105-5
SLX
APPLICATION
JIGSAW BLADES
J I G S AW & R E C I P R O C AT I N G S AW B L A D E S
Curved Cuts
Bi-Metal Blade
Plastic, Wood
Wood with Nails
Straight Cuts
Bi-Metal Blade
Non-Ferrous Metal, Aluminium
Sheet Metal, Metal
Straight Cuts
Bi-Metal Blade
Metal, Sheet Metal, Aluminium
Pipes and Profiles
Straight Cuts
Bi-Metal Blade
Metal, Plastics,
Wood with Nails
Fast Straight Cuts
Bi-Metal Blade
Thin Material
Metal, Sheet Metal
Fast Straight Cuts
Bi-Metal Blade
Thick Material
Metal, Non-Ferrous Metal
Fast Straight Cuts
Bi-Metal Blade
Thick Material
Metal, Non-Ferrous Metal
Plaster Board
Wood, Plastics
Fast Cutting
Hardened Teeth
Non-Ferrous Metal, Aluminum
Wood, Particle Board
Plaster Board, Wood with Nails
Fast Course Cut
Wood
Fast Course Cuts
Hardened Teeth
Green Wood, Branches,
Firewood
Straight Cuts
Cast Iron, Ceramics,
Fibre Reinforced Plastics
visit us at
www.carbitool.com.au
Small End Fitting to suit Bosch,AEG and Metabo
are available only 2 Blades/Card.
51
ECONOCUT ROUTER BITS
FOR THE HANDYMAN/DIY USER
STRAIGHT BITS
12.7mm (1/2”) SHANK
6.35 mm (1/4”) SHANK
PART No.
EY 206 M
EY 208 M
EY 210 M
EY 212 M
EY 213 M
EY 216 M
EY 218 M
EY 219 M
A
mm
6
8
10
12
13
16
18
19
B
mm
16
20
20
20
20
20
20
20
C
mm
46.7
51.7
51.7
51.7
51.7
51.7
51.7
51.7
PART No.
EY 1406 M
EY 1408 M
EY 1410 M
EY 1412 M
EY 1413 M
EY 1416 M
EY 1418 M
EY 1419 M
D O V E TA I L B I T S
B
mm
16
20
25.4
25.4
25.4
25.4
25.4
25.4
ROMAN OGEE BITS
6.35 mm (1/4”) SHANK
PART
No.
EY 1018
A
mm
6
8
10
12
13
16
18
19
A
B
C
mm mm mm
14.3 12.7 45
BEVEL
14°
6.35 mm (1/4”) SHANK
A
B
C RADIUS
mm mm mm mm
25.5 13 52
4
34.9 19 60.3 6.35
PART
No.
EY 5705 B
EY 5708 B
12.7 mm (1/2”) SHANK
12.7mm (1/2”) SHANK
EY 1018 1/2 14.3 12.7 66.7 14°
EY 5705 B 1/2 25.5 13 66.7 4
EY 5708 B 1/2 34.9 19 70 6.35
Replacement bearings 1/4” Shank EY B 3
1/2” Shank EY B 4
Bevel
V. G R O O V E B I T S
OGEE BITS
6.35 mm (1/4”) SHANK
A
mm
12.7
PART
No.
EY 112
B
mm
12.7
C
mm
45
12.7 mm (1/2”) SHANK
EY 112 1/2
12.7
12.7
54
6.35 mm (1/4”) SHANK
A
B
C RADIUS
mm mm mm mm
36.3 16.5 57.1 4.8
41 19 57.1 6.35
PART
No.
EY 7506 B
EY 7508 B
12.7mm (1/2”) SHANK
EY 7506 B 1/2 36.3 16.5 66.7 4.8
EY 7508 B 1/2 41 19 70 6.35
Replacement bearings EY B 4
FLUSH TRIM BITS
ROUNDING OVER BITS
6.35 mm (1/4”) SHANK
PART
No.
EY 8012 B
EY 8016 B
EY 8020 B
A
B
C
mm mm mm
BEARING
9.5 12.7 54 EY B3
12.7 13 56 EY B4
15.8 25.4 67 EY B1
12.7 mm (1/2”) SHANK
EY 8012 B 1/2 9.5 25.4 74.6 EY B3
EY 8016 B 1/2 12.7 25.4 79 EY B4
EY 8020 B 1/2 15.8 25.4 79 EY B1
6.35 mm (1/4”) SHANK
PART
No.
EY 508 B
EY 510 B
EY 512 B
EY 516 B
A
mm
25.4
28.5
31.8
38.1
EY 508 B 1/2
EY 510 B 1/2
EY 512 B 1/2
EY 516 B 1/2
25.4
28.5
31.8
38.1
6.35 mm (1/4”) SHANK
PART
No.
A
mm
B
mm
C
mm
EY 416
EY 420
EY 424
12.7
15.8
19.0
9.5
12.7
12.7
40
45
47
12.7 mm (1/2”) SHANK
mm
6.35
7.9
9.5
12.7
13.5
15.5
16.5
19
63.5
66.7
66.7
70
6.35
7.9
9.5
12.7
EY B 4
9.5
12.7
12.7
54
54
57.1
6.35 mm (1/4”) SHANK
PART
No.
EY 608 B
EY 610 B
EY 612 B
EY 616 B
A
mm
25.4
28.5
31.8
38.1
B
mm
13.5
15.5
16.5
19
C
mm
52
56
56
60.3
RADIUS
mm
6.35
7.9
9.5
12.7
12.7mm (1/2”) SHANK
EY 608 B 1/2
EY 610 B 1/2
EY 612 B 1/2
EY 616 B 1/2
25.4
28.5
31.8
38.1
Replacement bearing
52
RADIUS
BEADING BITS
CORE BOX BITS
12.7
15.8
19.0
C
mm
52
56
56
60.3
12.7mm (1/2”) SHANK
Replacement bearing
EY 416 1/2
EY 420 1/2
EY 424 1/2
B
mm
13.5
15.5
16.5
19
13.5
15.5
16.5
19
63.5
66.7
66.7
70
EY B 2
6.35
7.9
9.5
12.7
C
mm
61.9
63.5
66.7
66.7
66.7
66.7
66.7
66.7
ECONOCUT ROUTER BITS
FOR THE HANDYMAN/DIY USER
COVE BITS
CLASSICAL BITS
6.35 mm (1/4”) SHANK
PART
No.
EY 708 B
EY 712 B
EY 716 B
A
mm
22
28.5
34.9
B
mm
13
12.7
15.9
C RADIUS
mm mm
52 6.35
53 9.5
57.1 12.7
6.35 mm (1/4”) SHANK
A
B
C RADIUS
mm mm mm mm
PART
No.
EY C 8 B
EY C 12 B
28.5 12.7 50.8 3.2
35 15.9 57.1 4.8
12.7mm (1/2”) SHANK
12.7mm (1/2”) SHANK
EY 708 B 1/2 25.4 13 63.5 6.35
EY 712 B 1/2 31.8 12.7 66.7 9.5
EY 716 B 1/2 34.9 15.9 70 12.7
EY C 8 B 1/2 28.5 12.7 63.5 3.2
EY C 12 B 1/2 35 15.9 70 4.8
Replacement bearing
EY B 4
1/2” Shank EY B 4
R E B AT I N G B I T S
CHAMFERING BITS 450
6.35 mm (1/4”) SHANK
PART
No.
EY 1708 B
EY 1712 B
A
B
C
D
mm mm mm mm
22.2 12.7 53.8 6.35
28.5 12.7 53.8 9.5
12.7 mm (1/2”) SHANK
EY1708 B1/2 25.4 12.7 63.5 6.35
EY1712 B1/2 31.8 12.7 63.5 9.5
6.35 mm (1/4”) SHANK
PART
No.
EY 916 B
A
mm
32
B
mm
15
C
mm
55
12.7 mm (1/2”) SHANK
EY 916 B 1/2
32
Replacement bearing
15
66.7
EY B 3
A
1/2” Shank EY B 4
BEARINGS
ID
B
OD
PART
No.
EY B 1
EY B 2
EY B 3
EY B 4
visit us at
A
mm
16
9.5
9.5
12.7
B
mm
5
3.2
4
4.8
ID
mm
5
4.8
3.2
4.8
www.carbitool.com.au
T- C U T H A N D Y M A N R O U T E R B I T K I T S
TUNGSTEN CARBIDE TIPPED
BUDGET KIT
GREENLINE KIT
• 12 Pieces • Anti Kickback Design
• 12 Pieces • Anti Kickback Design
Wooden Presentation Box
Plastic Clamshell Pack
Contains:
Contains:
3 - Straight Bits (6,12,16mm)
3 - Straight Bits (1/4”,1/2”,3/4”)
1 - 1/2” Core Box Bit
1 - 1/2” Core Box Bit
1 - 1/2” V Groove Bit
1 - 1/2” V Groove Bit
1 - Dovetail Bit
1 - Dovetail Bit
1 - 1/2” Flush Trim Bit with bearing
1 - 1/2” Flush Trim Bit with bearing
1 - 1/4 Cove Bit with bearing
1 - 1/2” Cove Bit with bearing
1 - 1/4 Rounding Over Bit with bearing
1 - 3/8” Rebating Bit with bearing
1 - 3/8 Rounding Over Bit with bearing
1 - 1/2” Rounding Over Bit with bearing
1 - 4mm Roman Ogee Bit with bearing
1 - 1/4” Roman Ogee Bit with bearing
1 - 45o Chamfer Bit with bearing
1 - 45o Chamfer Bit with bearing
• 1/4'' Shank - Part No. TBUD-12
• 1/4'' Shank - Part No. TKIT-12
• 1/2'' Shank - Part No. TKIT-12-1/2
See page 36 for Carb-I-Tool Kits
53
PLANER AND BUZZER BLADES
PLANER AND BUZZER BLADES
DRILL COUNTERSINKS
BLADES FOR ELECTRIC HAND PLANERS
MACHINE
MODELS
MAKITA
HITACHI
HITACHI
RYOBI TOWA
RYOBI TOWA
RYOBI TOWA
1100, 1900, 1900B, 1923
PF2, PF3, FU20, F20A
F30A
L22, L22D
L22L
L120, L120N
PART No.
HIGH SPEED
STEEL
KH1900B
KHF20A
KHF30A
KHL22D
KHL22L
KHL120
PART No.
CARBIDE
TIPPED
KT1900B
KTF20A
KTF30A
KTL22D
KTL22L
KTL120
DRILL/COUNTERSINK
WITH BALL BEARING
DEPTH STOP
NEW
Carbide Tipped Countersink
H.S.S Drill
This tool allows precise depth
adjustment when drilling
screw holes. Ideal for timber
decks and furniture making.
Ball bearing depth stop with
delrin cap eliminates scoring
and burning on the
workpiece.
Triangular shanks suit ø3/8”
and ø10mm drill chucks.
SOLID TUNGSTEN CARBIDE KNIVES
TWIN EDGE 82mm LONG
For hand planers fitted with
conversion sets.
PART No.
KTKNIVES
(pair)
PART No.
THIN PLANER BLADES (Buzzer Blades)
Available in lengths up to 1060 mm (HSS) and 1010mm (Carbide Tipped).
These can be cut to length and rebated if required. Sets of knives of any number can be
matched and balanced.
CARBIDE TIPPED
HIGH SPEED STEEL
18% TUNGSTEN
THICKNESS
mm
3
3
3
3
WIDTH
mm
20
25
30
35
THICKNESS
mm
3
3
3
3
3
3
4
WIDTH
mm
20
22
25
30
35
38
38
DCS 3.2 DS
DCS 3.5 DS
DCS 3.8 DS
DCS 5.0 DS
DRILL/COUNTERSINK
Carbide Tipped Countersink
H.S.S Drill
DCS 2.4
DCS 3.2
DCS 4.0
DCS 4.4
DCS 5.0
DCS 5.0-16
DCS 6.3
HIGH SPEED STEEL
6-7% TUNGSTEN
WIDTH
mm
40
50
60
70
CARBIDE TIPPED
THICKNESS
mm
10
10
WIDTH
mm
60
70
SOLID CARBIDE
PLANER KNIVES
THICKNESS
in.
mm
KTSC 20 1/8
3.2
KTSC 24 1/8
3.2
PART No.
54
A1
A2
A1
mm
2.4
3.2
4.0
4.4
5.0
5.0
6.3
A2
mm
9
10
11
11
12
16
13
B
mm
10
10
10
10
10
12
10
C1
mm
52
70
73
80
82
92
101
WIDTH
in. mm
5/8 15.9
3/4
19
LENGTH
in. mm
6 152.4
6 152.4
C2 Shank
mm Ø mm
41
8
41
8
41
8
41
8
46
8
47
10
46
10
Produces a 82° Countersink
DRILL/COUNTERSINK
H.S.S Countersink
H.S.S Drill
1/4” Shank
Supplied in 2 or 3 piece sets
Special sizes
available on request.
B
C1
PART No.
Available in lengths up to
650 mm.
C2
For drilling, chamfering in solid
wood, wood composites, and
plastic laminated materials.
H.S.S DRILL
CARBIDE TIPPED COUNTERSINK
C O R R U G AT E D B A C K K N I V E S
THICKNESS
mm
8
8
8
8
A1 A2
B
C SCREW
mm mm mm mm GAUGE
3.2 16 7.3 65
#8
3.5 16 7.1 70
#9
3.8 16 7.0 75
#10
5.0 16 6.3 86 BUGLE
PART No.
HDSC - 1
HDSC - 2
HDSC - 3
HDSC - 4
HDSC - 5
DRILL SIZE
2 mm
2.4 mm
3 mm
3.175 mm
3.5
FOR SCREW
#4
#6
#8
#10
#12
CARB-I-TOOL FORSTNER BITS
Quality steel and tungsten carbide tipped forstner bits to produce flat bottom
holes of various diameters.
STEEL (imperial)
STEEL (metric)
1/4” quick change shank
PART No.
FB 08
FB 12
FB 16
FB 20
FB 24
FB 28
FB 32
FB 36
FB 40
FB 44
FB 48
FB 52
FB 56
FB 60
FB 64
FB 72
DIAMETER
1/4”
3/8”
1/2”
5/8”
3/4”
7/8”
1”
1–1/8”
1–1/4”
1–3/8”
1–1/2”
1–5/8”
1–3/4”
1–7/8”
2”
2–1/8”
PART No.
FB 06m
FB 10m
FB 12m
FB 16m
FB 20m
FB 22m
FB 25m
FB 28m
FB 32m
FB 35m
FB 38m
FB 42m
FB 45m
FB 48m
FB 50m
FB 54m
DIAMETER
6 mm
10 mm
12 mm
16 mm
20 mm
22 mm
25 mm
28 mm
32 mm
35 mm
38 mm
42 mm
45 mm
48 mm
50 mm
54 mm
PART No.
FBT 06m
FBT 10m
FBT 12m
FBT 16m
FBT 20m
FBT 22m
FBT 25m
FBT 28m
FBT 32m
FBT 35m
FBT 38m
FBT 42m
FBT 45m
FBT 48m
FBT 50m
FBT 54m
DIAMETER
6 mm
10 mm
12 mm
16 mm
20 mm
22 mm
25 mm
28 mm
32 mm
35 mm
38 mm
42 mm
45 mm
48 mm
50 mm
54 mm
ACCESSORIES
ACCESSORIES
1” diameter and above have saw
tooth design.
5 PIECE KIT
Part No: FB-5KIT
Contains 1 of each
5/8”, 3/4”, 1”, 1-1/4”, 1-3/8”
5 PIECE KIT
(Metric)
Part No: FB-5KIT METRIC
Contains 1 of each
16mm, 20mm, 25mm, 32mm, 35mm
5 PIECE KIT
(TCT Metric)
Part No: FB-5KIT TCT METRIC
Contains 1 of each
16mm, 20mm, 25mm, 32mm, 35mm
ADJUSTABLE CIRCLE
HOLE CUTTER
Produces holes of between 40mm and 120mm in a wide
range of materials to a depth of 35mm. Fitted with carbide
tipped blades, 2 spare steel blades, 1 spare drill and a hex
key are also supplied. 10mm hex shank.
For use in wood, laminates, plywood, MDH, FRP, etc.
For bench drill or secured portable hand drill only.
This tool is not suitable for portable router machines.
16 PIECE KIT
Part No: FB-16KIT
Contains 1 of each
1/4”, 3/8”, 1/2”, 5/8’, 3/4”, 7/8”, 1”
1-1/8”, 1-1/4”, 1-3/8”, 1-1/2”, 1-5/8”
1-3/4”, 1-7/8”, 2”, 2-1/8”
16 PIECE KIT
(Metric)
Part No: FB-16KIT METRIC
Contains 1 of each
6mm, 10mm, 12mm, 16mm, 20mm,
22mm 25mm, 28mm, 32mm, 35mm,
38mm, 42mm, 45mm, 48mm, 50mm,
54mm,
EXPANSION DRILL BITS
Ideal for drilling large holes in timber.
Made of hardened high carbon steel.
2 sizes • 15mm - 45mm
• 22mm - 76mm
For use in drills only
PART No.
EXPDB-1
EXPDB-2
SIZE RANGE
15mm - 45mm
22mm - 76mm
WOOD CHISELS
General purpose, durable
and economical range of
wood chisels.
PART No.
TACC-120
PART No.
WC 6M
WC 12M
WC 19M
WC 25M
WC 41KIT
SIZE
LENGTH
6m
260mm
12mm
260mm
19mm
260mm
25mm
260mm
6mm, 12mm, 19mm
25mm (260mm long)
55
ACCESSORIES
ACCESSORIES
AUGER BITS
A
PART No.
AUG230
AUG230
AUG230
AUG230
AUG230
AUG230
AUG230
AUG230
AUG230
AUG230
AUG230
AUG230
A
mm
6
8
10
12
14
16
18
19
20
22
25
30
(230mm Long)
6M
8M
10M
12M
14M
16M
18M
19M
20M
22M
25M
30M
PART No.
AUG400
AUG400
AUG400
AUG400
AUG400
AUG400
AUG400
AUG400
AUG400
AUG400
AUG400
AUG400
Precision ground cutting
edges, heat treated for
strength and screw
threaded centre point.
For use in hard and soft
timbers, chipboard, MDF,
plywood, etc.
BRAD POINT BITS
(400mm Long)
6M
8M
10M
12M
14M
16M
18M
19M
20M
22M
25M
30M
A
mm
6
8
10
12
14
16
18
19
20
22
25
30
HSS BRAD POINT
DRILL KIT
For all wood projects, furniture manufacturing,
carpentry and dowelling applications where
exact size holes are required.
6 Pce. Stub Length (58mm long)
Quick Change Hex Shank
Idea for drilling accurate holes in
soft wood and hard wood,
plywood and hardboards etc.
A
NEW
B
C
HIGH CARBON STEEL
PART No.
BP3M
BP4M
BP5M
BP6M
BP7M
BP8M
BP9M
BP10M
BP11M
BP12M
BP13M
BP-5KIT
CARBIDE TIPPED
A
B
C
mm mm
mm
3
40
60
4
48
75
5
55
85
6
58
90
7
68
95
8
75
105
9
80
115
10
80
115
11
95
115
12
95
125
13
95
130
3,6,8,10,12mm
PART No.
TBP3M
TBP4M
TBP5M
TBP6M
TBP7M
TBP8M
TBP9M
TBP10M
TBP11M
TBP12M
TBP13M
TBP-5KIT
A
B
C
mm mm
mm
3
38.1 76.2
4
38.1 76.2
5
50.8 88.9
6
60.3 101.6
7
60.3 110
8
60.3 120
9
60.3 120
10
60.3 120
11
60.3 150
12
60.3 150
13
60.3 150
3,6,8,10,12mm
HOLLOW MORTISE CHISELS
Combination of a drill and 4 sided chisel. For clean, straight edges
and corners in drilled holes. 3/4” shank
PART No.
DESCRIPTION
HBPQC-6KIT
1x 3,4,5,6,8,10mm Diameter
H.S.S. DRILL SAW (TiN Coated)
For cutting irregular contours and enlarging blind holes.
For use in wood, soft metals, plastics and rubber etc.
A
B
C
PART No.
DST3M
DST4M
DST6M
DST8M
DST10M
DST12M
DST 368M KIT
A
B
C
mm
mm
mm
3
40
60
4
45
70
6
60
92
8
62
97
10
70
103
12
70
109
1 of each 3mm, 6mm, 8mm
MULTI ANGLE DRILL BITS
These tools cut, drill, mill and rout with amazing directional control.
Due to multiple cutting edges they can cut forward, backwards,
sideways and curves.
A universal tool for all trades and DIY users.
• TiN Coated
NEW
A
PART No.
HMC08
HMC10
HMC12
HMC14
HMC16
HMC18
HMC20
HMC24
HMC28
HMC32
56
Diameter
Overall Length
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
3/4”
7/8”
1”
210mm
210mm
210mm
210mm
210mm
210mm
225mm
225mm
225mm
225mm
C
PART No.
MAD12M
MAD16M
MAD19M
MAD25M
MAD 4 KIT
A
C
mm
mm
12
130
16
130
19
130
25
130
4 pce kit 12,16,19,25
ACCESSORIES
ACCESSORIES
ROSETTE CUTTERS
Make your own quality rosettes in a drill press.
Decorative moulds for enhancing furniture and architectual applications
TRO 01 1/2
TRO 02 1/2
TRO 03 1/2
PART No.
TRO 01 1/2
TRO 02 1/2
TRO 03 1/2
TROL 01 1/2
TROL 02 1/2
TROL 03 1/2
A
in.
2 1/8
2 1/8
2 1/8
2 3/4
2 3/4
2 3/4
B
mm
54
54
54
70
70
70
in.
45/64
45/64
45/64
45/64
45/64
45/64
TROL 01 1/2
C
mm
18
18
18
18
18
18
in.
2 43/64
2 43/64
2 43/64
2 43/64
2 43/64
2 43/64
mm
68
68
68
68
68
68
Important Safety Warning
These tools are drills – For use in drill press only NOT for use in
a router.
Maximum RPM 5,000
Recomended RPM
– 1800 Hardwoods
– 3500 Softwoods
TROL 02 1/2
TROL 03 1/2
Drawings not to scale.
S PA D E B I T S
CARB-I-TOOL
SPADE BITS 6” LONG
PART No.
WSB 6
WSB 8
WSB 10
WSB 12
WSB 13
WSB 14
WSB 16
WSB 18
WSB 19
WSB 20
WSB 22
WSB 24
WSB 25
WSB 28
WSB 30
WSB 32
WSB 35
WSB 38
DIAMETER
6 mm
8 mm
10 mm
12 mm
13 mm
14 mm
16 mm
18 mm
19 mm
20 mm
22 mm
24 mm
25 mm
28 mm
30 mm
32 mm
35 mm
38 mm
COUNTERBORE
ADAPTOR FOR
SPADE
BITS
Pat. Pending.
SPADE BIT KITS
Allows you to convert your standard
spade bit into a counterbore tool
PART No.
WSBCA 3/8
WSBCA 1/2
WSBCA 5/8
DIAMETER
3/8
1/2
5/8
Fits most spade bits
and enables the
spade bit to bore a
hole to accommodate
the bolt head either
flush with, or below
the surface of the
timber. Pre drill bolt
hole to suit counterbore
diameter.
Part No:
WSB-6KIT
Part No:
WSB-13KIT
Contains 1 of each
6mm, 10mm,
12mm, 16mm,
19mm, 25mm.
Contains 1 of each
6mm, 8mm, 10mm,
12mm, 13mm, 14mm,
16mm, 18mm, 19mm,
20mm, 22mm, 24mm,
25mm, 6” Extension,
Hex Wrench
Part No: WSBEX-6
6” Extension for Spade Bits
Part No: WSBEX-12
12” Extension for Spade Bits
57
ACCESSORIES
ACCESSORIES
MASONRY DRILL BITS
Made of high carbon steel with a carbide tip and hardened core.
For use with rotary and percussion drills. Use for masonry,
conrete, rock, artificial stone etc.
SDS PLUS SHANK
ROUND SHANK
A
A
B
B
C
C
A
mm
5
5.5
6
6.5
8
10
12
13
14
16
18
20
22
25
PART No.
MDBS 5M
MDBS 5.5M
MDBS 6M
MDBS 6.5M
MDBS 8M
MDBS 10M
MDBS 12M
MDBS 13M
MDBS 14M
MDBS 16M
MDBS 18M
MDBS 20M
MDBS 22M
MDBS 25M
HINGE DRILL BITS
Self centering spring loaded drill bit allows for
accurate drilling of hinge screw holes
PART No.
HDB - 3
HDB - 5
HDB - 9
HDB - 12
HDB - 14
DRILL SIZE
5/64
7/64
9/64
11/64
13/64
FOR SCREW
#3, #4
#5, #6
#8, #9, #10
#12
#14, #16
B
mm
65
65
65
65
65
95
125
125
125
125
125
125
125
125
C
mm
110
110
110
110
110
160
210
210
210
210
210
210
210
210
A
mm
5
5.5
6
6.5
8
10
12
13
14
16
18
20
22
25
PART No.
MDBR 5M
MDBR 5.5M
MDBR 6M
MDBR 6.5M
MDBR 8M
MDBR 10M
MDBR 12M
MDBR 13M
MDBR 14M
MDBR 16M
MDBR 18M
MDBR 20M
MDBR 22M
MDBR 25M
HSS COUNTERSINKS
PART No.
HCS 1
HCS 2
HCS 3
HCS 4
A mm
9.5
12.7
16
19
B mm
4
5.5
7
9
C mm
39
39
45
50
PLUG CUTTERS
1/4" shank
Corner Chisel
Ideal tool for squaring corners of routered cuts
e.g. Hinge Recess, etc.
PART No.
HPLG 08
HPLG 12
HPLG 16
HPLG 20
DIAMETER
1/4"
3/8"
1/2"
5/8"
Made of
Quality
Tool Steel
PART No.
RCC 001
QUICK CHANGE CHUCK
STEP DRILL SET
Kit containing 3x 2 Flute,
titanium coated HSS step
drills with 1/4” quick change
chuck.
•Self starting.
For use in range of
materials
1x 13 steps – 1/8”-1/2”
1x 9 steps – 1/4”-3/4”
1x 6 steps – 3/16”-1/2”
PART No.
HSD-3 Kit 1
58
For use with tools equiped with quick
change shanks.
PART No.
HQCC
SIZE
1/4
CONTOUR GAUGE
For use in woodworking
and other applications
where a profile needs to
be cut or replicated.
• Simply press contour
gauge against the shape
required then cut to
shape.
• Sturdy metal
construction
PART No.
LENGTH
CONG-152
152mm (6”)
B
mm
51
60
60
60
60
90
120
120
120
120
120
120
120
120
C
mm
85
100
100
100
100
150
200
200
200
200
200
200
200
200
TEMPLATE GUIDE KIT - 10 PCE
Precision machined brass template guides.
NEW
Perfect for following templates and jigs.
ROUTER BASE PLATE ADAPTOR KIT
Predrilled to fit most routers. Made of clear plastic which allows the operator, in
most cases, to see the templates when machining.
Includes plate, centering pin and screws.
Ideal for intricate detail,
box joint, pattern work etc.
NEW
Packed in plastic blow moulded
case.
ACCESSORIES
ACCESSORIES
PART No. Description
TEGUK
10 PCE Template Guide Kit
Outside
Diameter
5/16”
3/8”
7/16”
1/2”
5/8”
3/4”
51/64”
1”
1 3/8”
Locknut
Inside
Diameter
1/4”
9/32”
11/32”
13/32”
17/32”
21/32”
5/8”
25/32”
1 9/32”
Barrel
Length
5/32”
5/16”
5/32”
5/16”
9/16”
9/16”
9/16”
3/8”
5/8”
Brass Guide not included
PART No.
BAPLK
25 PCE DRUM SANDING KIT
Includes: 5 Rubber Backed Drums 1/2”, 3/4”, 1”, 11/2”, 2” Diameter
2 x 80 Grit sanding sleeves to suit each drum size (10 Pcs)
2 x 120 Grit sanding sleeves to suit each drum size (10 Pcs)
Additional Template Guides available separately - (Not included in kit)
PART No.
TEGU5
TEGU10
Outside
Diameter
1 1/4”
1 1/2”
Inside
Diameter
1 5/32”
1 13/32”
Barrel
Length
1/2”
1/2”
NEW
ROUTER DEPTH
GAUGE
A simple and easy to use router
depth gauge that will reduce
guess work and wasted timber.
Clearly marked in 15 steps from
1/8” up to 1”.
PART No.
RDG-1
PART No.
DESCRIPTION
DSK25
25 Pce. Drum Sanding Kit
DSKR80 Replacement Sanding Sleeve Pack 80 Grit (10 Pcs)
DSKR120 Replacement Sanding Sleeve Pack 120 Grit (10 Pcs)
STEP GAUGE
Make accurate setups for
table saws, radial arm saws,
etc., quickly and easily
MOUNTED POINTS
4 Kits with a range of shapes in a
number of grit sizes for a
variety of applications
PART No.
SG-1
ROTARY RASPS
NEW
5 Pce Rotary Rasp 6mm shank set includes a
cylinder, 2 cones, ball, rounded cylinder
For use on a range of applications
NEW
PART No.
DESCRIPTION
5pce, 3mm Shanks, 2 x Cylinders, 1x Ball,
1 x Rounded Cone, 1 x Tear Drop
5pce, 6mm Shanks, 2 x Cylinders, 1x Ball,
2 x Cone on Cylinder
120
MOPOK206
20pce, 6mm Shanks, 11 x Cylinders, 3x Balls,
4 x Cone on Cylinder, 1 x Saucer, 1x Cone/Flat
Top
36
MOPOK483
48pce, 3mm Shanks, 5 x Cylinders Ball,
Rounded Cone, Tear Drop, (2 of each of the above
in 3 grit sizes
60
120
360
MOPOK53
MOPOK56
PART No.
RR 5
Grit
36
59
ACCESSORIES
ACCESSORIES
ROUTER TABLE
NEW
A sturdy, simple but very durable router table. The work top is made of
MDF with melamine top.
-
800x 610mm Table Top
-
10mm Thick Acrylic Insert
-
6mm Thick x 100mm High Alloy Fence
-
25mm Thick x 150mm High Sub-Fences
PART No. Description
PART No.
Description
MROUT1
MRM1
Router Table Package Includes:
Router Table (MROUT1) and Mitre Gauge (MMIT1)
Router Table
MITRE GAUGE
NEW
PART No.
MMIT1
ALUMINIUM INSERT PLATE
An alternative to the acr ylic plate supplied
with the router table or to fit into a custom made table. The
1/4” thick aluminium inser t plate provides a true flat surface
and limits any plate sag that may be experienced with the
use of heavy routers. This plate has pre marked (not pre
drilled) marking holes to match popular routers. Supplied
with levelling screws ,
4 magnets, 3 inser t
rings with screws to
suit and a steel
star ter pin to aid in
the routing of cur ved
pieces.
(Approx 9”x12”)
PART No.
Fits the Carb-I-Tool Router Table (MROUT1)
MALIP
ADJUSTABLE CLAMP
BAR CLAMP AND SPREADER
A general purpose clamp that has 7 jaw angles for a capacity
range up to 180mm. Features a patented ratchet mechanism with
quick release trigger. For use on a variety of clamping applications.
150mm Clamp Capacity. 165-350mm Spreading Capacity
Quick Grip Release Handle
Capacity Range
1) 0 - 18mm
2) 0 - 45mm
3) 25 - 75mm
4) 58 - 110mm
5) 92 - 141mm
6) 123 - 168mm
7) 150 - 180mm
NEW
NEW
PART No.
CL180
PART No.
CL150
60
NEW
ADJUSTABLE CORNER CLAMPS
MINI CORNER
CLAMP!
Ideal for small picture
frames. Made of plastic
with a web strap that
allows for up to 1m x 1m
clamping
For use in making picture
frames of any shape, gluing
boxes together or for gluing
trims without nailing.
Now comes with Flexible
Jaw Inserts to help hold
those odd shaped items.
Maximum Size:
900mm X 900mm
(steel band)
Replacement
Jaws Pk 10
ACCESSORIES
ACCESSORIES
(TVFLEX)
Replacement Corner
Pieces Pk 4
(TVCP)
PART No.
TV 149
PART No.
TV 148
SAFETY AIDS
A range of safety items designed to keep your hands away from blades and cutters.
PUSH STICK
LONG PUSH BLOCK
• 300mm long
For use on router tables and sawbenches
• 400mm long x 70mm wide
Made of durable, strong shatter proof plastic with a heavy
duty rubber foam pad that will not mark the workpiece.
PART No.
PBL-1
PART No.
PS-1
SHORT PUSH BLOCKS
150mm long x 75mm wide.
Both with heavy duty rubber foam pads.
OFFSET
STRAIGHT
Comfortable straight
handle
PART No.
PBSO-1
PART No.
PBSS-1
TABLE SAW MATE
8 tools in 1
– Depth Guage
– 230mm Rule
– 154mm Hook Rule
– 90 deg. Square
– 45 deg. guage for mitre cuts
– 30 & 60 deg. marks for setting
up angles
– Centre Finder
– Push Stick
PART No.
SMT-1
This block has an
angled contoured
handle for maximum
grip and operator
safety
FEATHERBOARD
WITH ANGLE
MEASURE
Can be used to control
passage of timber
horizontally on router
tables or vertically on the
fence as a hold down.
Spirit level indicates exact
angle of timber passage.
PART No.
FAM-1
61
ACCESSORIES
ACCESSORIES
PVA Woodworking Glue
WOOD JOINING BISCUITS
Compressed straight grained wood biscuits that expand on contact
with water based glue. Ideal for furniture, cabinates and other
special woodworking applications
NEW
NEW
PART No.
PART No.
PVA 250
PVA 500
SIZE
BISC0 150
BISC10 125
BISC20 100
250ml
500ml
QUANTITY
150 Pcs
125 Pcs
100 Pcs
Biscuit Size
For Joining
0 (48 x 16 x 4mm)
10 (54 x 19 x 4mm)
20 (57 x 24 x 4mm)
8-12mm Timber
13-18mm Timber
19mm+ Timber
Bulk quantities available on request.
DIAMOND SAW BLADES
CONTINUOUS RIM
For fast, smooth cutting in thin ceramics, stone, etc.
PART NO.
DSCR 105
DSCR 115
DSCR 125
DSCR 180
DSCR 230
DIAMETER
mm
in.
105
4
115
4-1/2
125
5
180
7
230
9
BORE SIZE
20/16
22.23
22.23/20
22.23/20/16
25.4/22.23
DIAMOND
DEPTH mm
5
5
5
5
5
KERF
mm
1.7
1.9
1.9
2.2
2.4
DIAMOND
DEPTH mm
7
7
7
7
7
KERF
mm
1.7
1.9
1.9
2.2
2.4
SEGMENTED RIM
Universal blade for concrete, brick, masonry, etc.
PART NO.
DSSR 105
DSSR 115
DSSR 125
DSSR 180
DSSR 230
DIAMETER
mm
in.
105
4
115
4-1/2
125
5
180
7
230
9
BORE SIZE
20/16
22.23
22.23/20
22.23/20/16
25.4/22.23
TURBO
For fast, smooth cutting in a wide range of masonry applications. Cooling holes control heat build-up.
PART NO.
DSTR 105
DSTR 115
DSTR 125
DSTR 180
DSTR 230
DIAMETER
mm
in.
105
4
115
4-1/2
125
5
180
7
230
9
BORE SIZE
DIAMETER
mm
in.
105
4
115
4-1/2
125
5
180
7
230
9
350
14
BORE SIZE
20/16
22.23
22.23/20
22.23/20/16
25.4/22.23
DIAMOND
DEPTH mm
7
7
7
7
7
KERF
mm
1.78
2
2
2.2
2.8
DIAMOND
DEPTH mm
7
7
7
7
7
7
KERF
mm
1.7
2
2
2.2
2.5
2.8
LASER WELDED
For long life in most applications
PART NO.
DSLW 105
DSLW 115
DSLW 125
DSLW 180
DSLW 230
DSLW 350
62
20/16
22.23
22.23/20
22.23/20/16
25.4/22.23
25.4
ACCESSORIES
ACCESSORIES
DIAMOND POINTS
Ideal for carving and engraving on wood, ceramics, glass and other hard materials.
20 pce - 1/8” shank
PART No.
DPS-20
CONTENTS
Cylindricals, Ball End Cylindrical,
Balls, Pointed Cones, Flame,
Inverted Taper
ADJUSTABLE
HOLE SAW
For glazed ceramic wall tiles
Cuts holes from 10mm-100mm
in most ceramic wall tiles
PART No.
DPS-50
CONTENTS
Cylindricals, Ball End Cylindricals,
Cones, Inverted Cones, Pointed
Cones, Flames, Balls, Tapers,
Square Wheels, Radius Wheels
PART No.
DPS-10
CONTENTS
Cylindricals, Ball, Cone, Taper,
pointed cones
GLASS AND TILE DRILLS
For drilling glass and tiles. Carbide Tipped.
(Not suitable for toughened glass)
A
B
C
CARBIDE TIPPED
PART No.
TATC-100
PART No.
TGT3M
TGT4M
TGT5M
TGT6M
TGT8M
TGT10M
TGT12M
A
3
4
5
6
8
10
12
B
6.2
8.2
10.2
12.2
16.2
20.2
20.2
C
55
55
55
65
75
90
90
SHARPENING STONES
Handy size Diamond Whetstones for a range of sharpening applications. Including Knives, scissors, axes and other tools
side 1
side 2
PART No.
DWS-331
3 Whetstones
(180, 260, 360 grit)
each 76mm x 25mm
PART No.
DWS-162
1 Double sided Whetstone
150mm x 50mm with handle
63
SPECIALISED LUBRICANTS
By employing the latest advances in tooling enhancement technology these specially formulated lubricants bond to the microstructure of the tool
surface giving added lubricity as well as reducing friction and cutting temperature. This unique bond also protects the cutting edge against the
action of corrosive materials. These products are non toxic, non hazardous and biodegradable.
Opti-Cut - XL
Opti-Cut - SS
Opti-Cut - NF
Premium blade lubricant for
woodcutting applications. Ideal for
saw blades, drills, band saws, hole
saws, planes, Moulder heads etc.
Just spray onto the cutting tool for a
cooler and cleaner cut with less
friction prevents fouling caused by
pitch build up. Suitable for all cutting
surfaces.
Specialised lubricant for solid
surface applications allows
cutting edges to travel through
solid surface materials with less
friction and heat. Opti-Cut-SS
seals the cutting surface
preventing the action of
corrosive acids and resins from
chemically etching the cutting
surface.
Cutting edge lubricant for non
ferrous materials (aluminium,
brass copper etc.) For cooler
cutting with less friction.
Increases lubricity, reduces
the chance of the waste
material adhering to the
cutting edge.
PART No.
OCXLS - 8B
PART No.
OCSSS - 8B
236ml Spray Bottle
Also available in 3.8 Litre
Bulk Bottle
236ml Spray Bottle
236ml Spray Bottle
PART No.
OTOP - KIT
Blade Saver
Tool Saver
The all in one saw blade and router bit
cleaning system. Use to remove pitch,
gum and resins from all cutting surfaces
Everything you need to
keep your tools looking and
working like new.
All in one kit
Contains:
1x 59ml Bottle of Router Bit lubricant
1x 59ml Bottle of Opti-Cut XL
lubricant (see above)
1x 59ml Bottle of Top Saver
(see above)
1x 59ml Bottle of Blade Saver
(see above)
1x 44ml Bottle of Dri-Tool Lubricant This lubricant
penetrates deep into the pores of
the surface structure to clean and remove
contaminants. Leaves the surface sealed
and gives high lubricity. Ideal for bearings,
slide screws, locks, etc.
Top Saver
Rust remover / Lubricant / Surface
sealant / Conditioner.
Completely removes rust and corrosion
on metal surfaces. Reduces friction,
eliminates binding and repels moisture.
Size
236 ml
OCNFS - BULK 3.8 L
PART No.
OCNFS - 8B
PART No.
OBS - KIT
PART No.
OTS - KIT
PRODUCT RANGE
WOODWORKING PRODUCTS
CARB-I-TOOL ROUTER BITS
O
Solid Carbide
O
Carbide Tipped
O
Diamond Tipped
O
Diamond Coated
O
Replaceable Insert
O
High Speed Steel
3D ROUTER CARVER
CARBIDE TIPPED SAW BLADES
O
Carb-I-Tool Bench Range
O
Trade Blade Portable Range
CARB-I-TOOL
O
Hand Planer Blades
O
TCT and HSS Buzzer Blade
O
Carbide Tipped Buzzer Blade
O
Wood Boring Drills
(TCT and Diamond Tipped)
O
TCT Holesaws
O
Indexable Inserts
CARB-I-TOOL
Carbide Tipped Hole Saws
O
Drill / Countersink Bits
O
Indexable Inserts
O
HSS Buzzer Blade
OTHER PRODUCTS
O
Handsaws
O
Drill/Countersink Bits
O
Jigsaw Blades
O
Reciprocating Saw Blades
O
Corner Chisel
O
Circle Cutter
O
Forstner Bits
O
Auger Bits
O
Brad Point Bits
O
Drill Saws
O
Expansion Bits
O
Multi-Angle Drill Bits
O
Rosette Cutters
O
Spade Bits
O
Masonry Drill Bits
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Diamond Saws (Masonry)
Chisels
Sharpening Stones
Diamond Points
Router and Saw guages
Glass and Tile Drills
Safety Aids
Specialised Lubricants
All Purpose Magic Saw
Hollow Mortise Chisels
Tempate Guides
Router Base Plate Adaptor
Drum Sanding Kit
Rotary Rasps
Mounted Points
Router Table
Mitre Gauge
Safety Switch
Bar Clamp/Spreader
PVA Glue
Wood Joining Biscuits
CARB-I-TOOL (AUST.) PTY. LTD.
ACN. 005 203 289
ABN. 26 005 203 289
12 Levanswell Road, Moorabbin,
Victoria 3189, Australia.
Telephone: (03) 9555 2966
Facsimile : (03) 9555 8695
International Tel: 61 3 9555 2966
International Fax: 61 3 9555 8695
Email: sales@carbitool.com.au
Web Site: www.carbitool.com.au
JANUARY 2012
It’s a BIT better with CARB-I-TOOL
ENGINEERING PRODUCTS
CEMENTED CARBIDES
O
Ground Rods
O
Strips & Tips
O
Disposable Inserts
CARB-I-TOOL
SOLID CARBIDE TOOLS
O
Burs
O
Slot Drills
O
End Mills
O
Carbide Drills
O
Dee Bits
CARB-I-TOOL
O
Diamond Grinding Wheels
O
Diamond Lapping Compounds
O
HSS Metal Cutting Saws
FOLEY - BELSAW
O
Range of saw and cutter
sharpening equipment

router bits - Carbide Tools

Transcription

Similar documents

DFRC report - Voice of Detroit

Non-Sparking, Non-Magnetic Tools

Font brochure