For more than 30 years, SUN TRACKER® has built

THE BEST IN THE
For more than 30 years, SUN TRACKER® has built pontoon boats richly
featured for fun, safety, durability, comfort and convenience. Every year
we explore new and better methods, with a disciplined focus on continuous
quality improvement. Today, each new SUN TRACKER is built using Lean Sigma
manufacturing methods—the same best practices used by top aerospace,
automobile, appliance and medical equipment manufacturers.
There’s a reason and a process behind every advance we make. And skilled
crafts people bring it all together with impressive fit and finish. These are the
best boats we’ve ever made, and arguably, the best the industry has to offer.
Because our construction methods and quality are second to none, we back
every SUN TRACKER with the best warranty in the pontoon industry. Every 2014
SUN TRACKER is backed by a 10-year bow-to-stern warranty (supplemented with
a limited lifetime warranty on deck and structural components) to assure your
fun-filled days are also filled with ultimate peace of mind.
We are proud of our warranty. For complete details visit
www.suntrackerboats.com/about/warranty.cfm
PONTOON
Trust the flotation, balance, design and
ride of our pontoon logs when you are
out on the water.
24” DIAMETER
Our standard pontoon logs are 24” in diameter (larger than many of our competitors)
and warranted for the life of your boat. This size offers an optimal balance of highriding flotation and efficient performance.
NO-KEEL DESIGN
From the outset, SUN TRACKER logs have always featured an efficient no-keel design.
The bulkheads separating each chamber are welded around the entire circumference
of the tube, providing an air-tight seal and additional structural support, eliminating
the need for an external keel that adds weight and drag.
24”DIAMETER
MULTICHAMBERED
FAILSAFE FLOTATION
NO-KEEL
DESIGN
Air-filled, multichambered pontoons ensure failsafe flotation in the unlikely event of a
puncture. For quality assurance and our owners’ peace of mind, every log is pressure
tested twice at the factory.
MULTICHAMBERED
FAILSAFE PONTOON LOGS
PARTY BARGE 20 DLX shown
ROUND LOG SHAPE
Our cylinder-shaped logs offer maximum structural strength, compared to elliptical
or U-shaped logs with inherently inferior structural geometry.
COMPETITOR
ELLIPTICAL PONTOON LOG
COMPETITOR
U-SHAPED PONTOON LOG
To feed your need for speed,
SUN TRACKER now offers more
performance pontoon boats
than ever before.
SUPERIOR
PERFORMANCE
SUN TRACKER XP3 extra-performance models feature three 26”-diameter pontoon
logs with a total of six performance lifting strakes, two on each log, for enhanced
all-around performance with better stability and control. In addition, to withstand
the forces encountered at higher speeds, XP3 pontoon logs are made from thicker
.100 gauge aluminum alloy.
MORE FEATURES
REGENCY® XP3 pontoons come equipped with a ski tow pylon, and SIGNATURE XP3
models feature ski tow pylon hardware to easily add one to the aft swim platform.
D
RE GS
BEN LO
AMNTOO
H
C O
”
26
R
TE
ME
DIA
MERCURY®
MOTOR OPTIONS
I P
LT FE
MUAILSA
F
The XP3 package allows for even larger Mercury® engine options, including the
best-in-performance Verado® models. For the PARTY BARGE® 22 XP3, choose from
motor options up to the 150 ELPT FourStroke. And for the PARTY BARGE® 24 XP3,
choose motor options up to the 200 L Verado®.
PARTY BARGE 24 XP3 shown
PONTOON
Our thought-out, stable and durable deck
structure keeps you safe and sound as
you cruise and soak up the sun.
BOX-BEAM STRUCTURE
Thanks to the inherent box-beam design and closed structure of the SUN TRACKER
Z-bar (compared to the open C-bar used by many), the structure is stronger with
no exposed fasteners below deck.
Z-BAR CROSS MEMBERS
Designed with care, the support system throughout keeps your boat strong for
any activity. Z-bar cross members support the deck and extend the full width
of the boat, acting like floor joists in a house. These cross members are bolted
to the M-shaped brackets at each end, using a total of four bolts to provide
secure attachment and reduced flexing. SUN TRACKER uses as many or more
deck supports than the competition and utilizes computer-aided engineering. The
Z-bars are variably spaced below the deck to provide maximum support where
needed. Where flooring panels join, they are securely fastened to the Z-bar and
silicone sealed to prevent water intrusion.
M-SHAPED BRACKETS
Heavy-duty M-shaped brackets are securely welded to the top of each pontoon. On 20-ft. and longer models, the
exterior surface is one continuous piece, providing an added level of support along the full length of the boat.
Interior M-bracket are staggered, permitting access to cables, plumbing and wiring. Working as a system, these
M-brackets function like the foundation of a house, providing a solid base for the extruded Z-bar cross members
which are bolted to them.
STERN SHOWN
INTERIOR SHOWN
EXTERIOR SHOWN
PONTOON
Top-grade materials and components
result in a line of pontoon boats ready
for years of family fun and memories.
ROBUST DESIGN
Unlike a boat with a conventional hull, the deck of a pontoon boat is integral to
the overall structure of the boat. More than 30 years of experience has produced
a robust design, assuring the strength and integrity of the deck and substructure.
For example, SUN TRACKER uses MORE THAN DOUBLE THE NUMBER OF DECK
FASTENERS compared to the through-bolts used by some competitors.
REINFORCED BOW EYE
To reduce the stress while winching your SUN TRACKER onto a trailer, the bow eyes
are connected to three heavy-duty full width Z-bar cross members. Many competitors
attach to only one or two cross members.
DECK FLOOR
Our ¾”-thick 7-ply pressure-treated deck floor is warranted for the life of your boat—
ensuring your peace of mind as you embark on years of family adventures and
trouble-free ownership.
TEK® FASTENING SYSTEM
The SUN TRACKER deck is secured to the Z-bars using coated TEK brand deck
fasteners which friction-weld to the Z-bars as they are tightened. The reliability
of this method has been proven over many years and millions of hours on the
water. In its history of use on our pontoon boats, the TEK fastening system has
no reported failures or warranty claims.
ABOVE DECK
Our attention to detail extends
to the components of the deck
enclosure as well.
STURDY RAILS
Our system includes sturdy 1.25” anodized aluminum rails and stanchions.
The entire system is securely bolted through the floor and anchored to the
structural Z-bars below, and our fence panels are securely attached to the
rails using sound- and vibration-deadening insulation strips.
SECURITY GATES
SUN TRACKER boats feature gates that open only to the inside and feature
double latches to guard against accidental opening.
Both the rail and gate systems are covered by our warranty for the life of
your boat.
RAIL SPACERS
Rail spacers raise the railing above the floor covering to promote positive
drainage and ventilation to help prevent mold and mildew.
OPTIONAL TRAILERS
Optional trailers are available for SUN TRACKER owners. Included are a bow
boarding ladder, outboard motor support and EZ Lube hubs. Each trailer is
custom crafted in our own facility and constructed from heavy-duty galvanized
steel tubing with our GALVASHIELD® corrosion protection, then covered with
a baked-on powder-coat finish. The result is a rugged, durable trailer with
exceptional corrosion resistance, easy maintenance and lasting good looks.
INTERIOR
Outfitted with satisfying features,
the interior fit and finish of the
boat gives you outstanding
convenience and comfort.
SEATING QUALITY
We design and craft our own furniture at a facility within our manufacturing
complex. Each piece of upholstery is built, custom sewn and carefully
tailored by skilled crafts people with years of experience. Using marinegrade vinyl and threads, and a moisture barrier over the foam, our
furniture is well protected from water intrusion—ready to provide you
years of use and enjoyment.
SAFE & SOUND STORAGE
Couches and lounges include spacious below-seat storage solutions and
armrest compartments (varies by model). To secure your valuables, some of
these storage areas are lockable.
ERGONOMIC COMFORT
Every SUN TRACKER couch and chair is extremely comfortable because
multiple-density foams are ergonomically placed to provide optimal support
and comfort on seating areas, as well as in lumbar supports and headrests,
where applicable.
ELECTRIC &
PLUMBING
Water, water everywhere…is taken into
consideration whether water is being
used or guarded against.
PLUMBING SYSTEM
On models equipped with livewells and/or sinks, our plumbing system is
routed through the M-brackets to keep it protected.
FACTORY
All SUN TRACKER models are factory
rigged to Mercury specifications by
Mercury-trained technicians.
MARINE-GRADE
CONNECTORS
Throughout the boat, wiring harnesses are wrapped in abrasionresistant conduit. Marine-grade, automotive-quality main harness
connectors ensure reliable, water-resistant connections.
RELIABILITY
& PERFORMANCE
When your SUN TRACKER pontoon leaves the
plant, it is completely rigged by Mercury-trained
technicians and ready to go. Factory rigging
ensures you’ll experience superb reliability,
maximum performance and great peace of mind
through years of service.
ASSURING EVERY DAY IS
Every new SUN TRACKER comes STANDARD with our exclusive
10-year bow-to-stern warranty, the best in the pontoon industry.
+Ten-Year Bow-to-Stern Warranty
+Limited Lifetime Structural and Deck Warranty
+Transferable to Second Owner
+One-Stop Factory Warranty Resolution
+Full Coverage Throughout Warranty Period,
No Pro-Rating
COMPARE TO THE COMPETITION
Hull Warranty
Structural Warranty
Deck Warranty
Transferable
Limited Lifetime
Structural Warranty
Limited Lifetime
Deck Warranty
YES
Limited Lifetime
Structural Warranty
Limited Lifetime
Deck Warranty
YES
Limited Lifetime
Structural Warranty
Lifetime Marine Deck
PTP Deck Panels
NO
Limited Lifetime
Structural Warranty
Limited Lifetime Deck
Component Warranty
NO
Limited Lifetime
Structural Warranty
Limited Lifetime
Deck Warranty
YES
Limited Lifetime
Structural Warranty
Limited Lifetime
Deck Warranty
NO
SUN TRACKER
10-Year Bow-to-Stern
BENNINGTON
5-Year Bow-to-Stern
(Optional 7-Year)
GODFREY
5-Year Bow-to-Stern
5-Year Furniture & Upholstery
5-Year Carpet & Canopy Fabrics
FOREST RIVER
5-Year Bow-to-Stern
HARRIS
5-Year Bow-to-Stern
PREMIER
5-Year Bow-to-Stern
5-Year Carpet/ 7-Year Vinyl
Warranty information obtained from public resources supplied by boat manufacturers.
For complete details www.suntrackerboats.com/about/warranty.cfm
Visit SUNTRACKERBOATS.COM/CONSTRUCTION for more information.
Best efforts are used to ensure accuracy in the information shown; nevertheless, customer should always check with local dealer regarding discrepancies that may appear in print. © 2014 Tracker Marine Group