LATEX Product Catalogue（PDF：1165KB）

LATEX
LATEX Product Catalogue
LATEX
ZEON Corporation’s Kawasaki and Tokuyama latex
manufacturing plants are acquired ISO 9001（international
quality management standard）and ISO 14001（international
standard for environment protection） certifications.
Contents
LATEX Product Catalogue
1 Latex for Paper Coating
（styrene-butadiene copolymer）
3
2 Styrene-butadiene Copolymer（SB）Latex
4
3 Latex for ABS Resin（polybutadiene copolymer）
6
4 Acrylonitrile Butadiene Copolymer（NBR）Latex
7
5 Acrylate Latex
9
6 Soap-free Latex
12
Instuctions for handling latex
Instuctions for storing latex
13
* Values in this catalogue are provided for reference only, and do not represent a warranty for performance under specific actual conditions or uses.
* ZEON Corporation is not liable for products which incorporate Nipol latices patented by third parties.
LATEX
1 Latex for Paper Coating（styrene-butadiene copolymer）
2
ZEON Corporation markets for modified styrene-butadiene latex; and organic pigments coated paper such as art paper, light-weight
coated paper and lightly coated paper; coated paper board, such as coated white cardboard and coated Manila card-board; data
recording paper such as pressure-sensitive paper and thermal paper. We develop diverse latices utilizing new technologies in response
to the various needs of the market.
Major applications of Nipol SB latices are detailed in tables 2-1 to 2-6, while table 2-7 lists other typical applications, and are useful
references for selecting a specific latex.
■ Properties
■ Table 2-1 Tire cords
Product name
Nipol LX407F
series
Composition
Modified SB
Nipol LX407G
series
Modified SB
Nipol LX407S
series
Modified SB
Notes
Total
solid
（%）
50
50
48
pH
8 〜 10
Viscosity
（mPa・s）
50 〜 250
Latex of styrene-butadiene copolymer（SB latex）
Average
particle
diameter
（nm）
Characteristics
Applications
Product name
Composition
Total
solid
（%）
pH
Coated paper for
sheet offset and
gravure printing, and
coated paper board.
Nipol 2518FS
VP
40.5
11.0
30
50
80
80 〜 150
Desirable for sheet offset due to
surface strength（specifically
formulated to avoid dry pick）. Suitable
for ULWC web offset. Low Tg product is
used for gravure.
and rubber adhesion for RFL. Excellent
−44 Fiber
adhesiveness with nylon cords.
Nipol 2518GLA
VP
40.5
11.0
25
45
200
Excellent blister resistance and wet
strength. Wide range of applications
from art paper to ULWC paper.
Coated paper for
web offset.
Fiber and rubber adhesion for RFL. Excellent
with nylon cords and excellent
−44 adhesiveness
initial adhesiveness with polyester cords. Good
adhesiveness with aramid cords.
Nipol LX110
SBR
40.5
11.5
55
60
80
type with high adhesive strength. Soluble with
−47 RFL
VP latex. These are frequently used together.
Nipol LX112
SBR
40.5
11.0
30
60
80
as above. Slightly lower viscosity than
−47 Same
LX110. Used with VP latex.
8 〜 10
50 〜 250
80 〜 150
6〜7
30 〜 200
Excellent color development and
100 〜 160 surface strength as a binder for
pressure-sensitive paper.
Pressure-sensi-tive
paper and special
coating paper.
Notes
1. Modified SB: carboxyl styrene-butadiene copolymer
Average
Surface
Viscosity
parti-cle
Tg
tension
diameter （℃）
（mPa・s）
（mN/m）
（nm）
Characteristics
1. VP: styrene-butadiene vinylpyridine copolymer
2. SBR: low styrene-butadiene copolymer
■ Table 2-2 Carpets
■ Properties（organic pigments）
Product name
Nipol LX407BP
series
Nipol V series
Composition
Modified SB
Modified SB
Total
solid
（%）
50
50
Composition
Nipol LX430
Modified SB
medium styrene
（hard type）
49.0
7.0
130
50
150
12
Slightly hard carboxyl SB latex. Excellent
stability, filler dispersion and adhesiveness.
Easy processing due to low bubbling.
Nipol LX433C
Modified SB
medium styrene
（hard type）
50.0
9.0
90
45
100
50
Hard carboxyl SB latex. Excellent
reinforcement effect, filler dispersion and
combination stability. Blend with other soft
Nipol latices to adjust toughness.
Nipol LX435
Modified SB
medium styrene
50.0
8.5
120
38
120
−14
Medium-hard type. Great adhesive strength even
at high filling rate. Well suited for floss processing.
Nipol 2507H
SB high styrene
52.0
10.0
20
35
250
58
High styrene-butadiene latex. Blend with other
SB latices to adjust toughness.
Product name
pH
7〜8
8〜9
Viscosity
（mPa・s）
Average
particle
diameter
（nm）
Characteristics
10 〜 150
Binder pigment. Competitive cost
performance as a binder.
printability, including print
200 〜 400 Excellent
gloss and ink receptivity. Can
dramatically improve blister pack
suitability and pasting quality.
100 〜 200
Organic pigment which performs as
binder. High styrene. Improves gloss
and brightness of coated paper and
200 〜 400 paper board. Effectively enhances
printability and processing aptitude
（varnishability, pasting, blister pack
suitability）.
Applications
Coated paper board.
Coated paper board.
Average
Surface
Viscosity
particle
Tg
pH
tension
diameter （℃）
（mPa・s）
（mN/m）
（nm）
Total
solid
（%）
Characteristics
Notes 1. SB: styrene-butadine copolymer
2. Modified SB: carboxyl styrene-butadiene copolymer
■ Table 2-3 Non-woven fabrics and fiber
Nipol LX407BP series
（average particle diameter: 0.4 μm）
3
LATEX
Nipol V series
（average particle diameter: 0.3 μm）
Average
Total
Surface
Viscosity
particle Tg
solid pH
tension
diameter （℃）
（mPa・s）
（%）
（mN/m）
（nm）
Product name
Composition
Nipol LX415M
Modified SB
medium styrene
（hard type）
Nipol LX432M
Modified SB
medium styrene
（soft type）
41.0
8.0
60
Nipol LX433C
Modified SB
medium styrene
（hard type）
50.0
9.0
Nipol LX421
Modified SB
medium styrene
（soft type）
41.0
Nipol 2507H
SB high styrene
43.0
8.0
55
45
Characteristics
Applications
Hard, self-crosslinking
type with low
formaldehyde. High
waterproofing property,
and dry cleaning and light
resistance.
Non-woven fab-rics for
wooden floor cushions, and
wrapping materials
（pulp nonwoven fabrics）.
110
27
45
130
Soft, self-crosslinking type
with low formaldehyde.
waterproofing
−55 Excellent
properties, and dry
cleaning, heat, and light
resistance.
90
45
100
50
8.0
20
40
100
modified
−18 Standard
carboxyl.
52.0 10.0
20
35
250
58
Hard type. Effectively
reinforces other SB
latices.
Non-woven fabrics（wooden
floor cushions, glass fibers）.
Filters as impregnated nonwoven fabrics, and synthetic
leathers.
Glass fibers and fiber treatment such as impregnated
polishing fab-rics.
High concentration with
improved stability.
Non-woven fabrics
（synthetic
leather）, and fiber treatment
such as shoe materials.
LATEX Product Catalogue
4
LATEX
■ Table 2-4 Cement
Product name
Composition
Nipol LX206
SB
medium styrene
（soft type）
Nipol LX438C
Modified SB
medium styrene
（soft type）
■ Table 2-7 Applications
Average
Total
Surface
Viscosity
particle Tg
solid pH
tension
diameter （℃）
（mPa・s）
（%）
（mN/m）
（nm）
45.5 11.0
45.0
7.0
20
350
35
50
200
150
Characteristics
Excellent chemical
−15 stability and good
miscibility with cement.
1
Good miscibility with
cement and adhesive
strength.
Applications
Mixed with cement mortar
（deck covering）.
Mixed with cement mortar
（waterproofing use）.
Product name
Product name
Composition
Average
Total
Surface
Viscosity
particle Tg
solid pH
tension
diameter （℃）
（mPa・s）
（%）
（mN/m）
（nm）
Characteristics
Nipol LX110
SBR
40.5 11.5
55
60
80
as special internal
−47 Used
paper .
Nipol 2507H
SB high
styrene
52.0 10.0
20
35
250
58
100
Used for special papers
as impregnated
−18 such
paper and paper
processing.
Nipol LX421
Nipol LX416
Modified SB
（soft type）
41.0
Modified SB high 48.0
styrene
Nipol LX430
Modified SB
medium
styrene
（hard type）
Nipol LX432M
Modified SB
medium
styrene
（soft type）
49.0
41.0
8.0
20
40
High concentration with
improved stability.
Applications
Gaskets.
Shoe material（impregnated）
Impregnated paper.
8.0
45
50
110
50
Used to reinforce other
paper such as
latices. Good mechanical Impregnated
shoe materials.
and spray stability.
7.0
130
50
150
12
Excellent adhesive
strength and stability.
Low bubbling. Available
for various purposes.
130
Soft, self-crosslinking
type with low
Excellent Paper processing
（impreg−55 formaldehyde.
waterproofing properties, nated）, and special paper.
and dry cleaning, heat,
and light resistance.
8.0
60
45
Special papers used in
paper processing
（impregnated）.
■ Table 2-6 Adhesives
Product name
Characteristics
Applications
30
60
80
adhesive
−47 Excellent
strength.
Adhesive.
Modified SB
medium styrene
（soft type）
50.0
8.5
100
40
120
adhesiveness
−39 Excellent
and extremely low odor.
Film treatment, and tape
primer of paper adhesives.
Modified SB
（hard type）
49.0
7.0
130
50
150
12
130
Soft, self-crosslinking
with low formaldehyde.
waterproofing
−55 Excellent
properties, and dry
cleaning, heat, and light
resistance.
SBR
Nipol LX426
Nipol LX430
LATEX
Average
Total
Surface
Viscosity
particle Tg
solid pH
tension
diameter （℃）
（mPa・s）
（%）
（mN/m）
（nm）
40.5 11.0
Nipol LX112
Nipol LX432M
5
Composition
Modified SB
medium sytrene
（soft type）
41.0
8.0
60
45
Excellent adhesive
strength and stability.
Low bubbling.
Adhesives for wood.
Carpets
Fiber
Tire cords treatment
Cement
mixing
Blend with
condensation Adhesives Reinforcement
resin such as
phenol
Nipol LX110
◎
◎
○
Nipol LX112
○
◎
◎
◎
Nipol LX206
Nipol 2507H
■ Table 2-5 Special paper and paper processing（internal and impregnated）
Impregnated Internal Non-woven
paper and paper and
fabrics
fabrics
fabrics
○
○
◎
◎
Nipol 2518FS
◎
Nipol 2518GLA
◎
◎
Nipol LX415M
Nipol LX416
◎
Nipol LX421
◎
○
○
○
◎
○
Nipol LX432M
◎
Nipol LX433C
◎
◎
○
◎
○
◎
◎
○
◎
◎
◎
◎
○
○
◎
◎ indicates major applications of the product.
Latex for ABS resin
Average
Surface
Viscosity
parti-cle
tension
diameter
（mPa・s）
（mN/m）
（nm）
Product name
Type
Total
solid
（%）
pH
Nipol LX111A2
PB
54.0
11.5
70
40
Nipol LX111K
PB
55.0
11.5
35
38
Notes ○
◎
Nipol LX438C
3
◎
◎
Nipol LX435
Note
◎
○
Nipol LX426
Nipol LX430
◎
Gel
contents
（%）
Characteristics
300
73
Sharp distribution of particle diameter.
General-purpose type. Suitable for transparent
uses.
350
86
General-purpose polybutadiene latex of hard
gel and high gel types.
1. PB: polybutadiene
2. Sodium alginate method is applied for calculating the average particle diameter of this table.（For other tables, electron microscopy is applied.）
Adhesives. Masking tape
primers.
LATEX Product Catalogue
6
LATEX
4
Latex of acrylonitrile butadiene copolymer（NBR latex）
Nipol NBR latices are available in medium nitrile, medium-high nitrile, and high nitrile, according to the relative concentration of
acrylonitrile. We also have modified types, such as modified carboxyl, and non-modified types. Major applications are detailed in tables
4-1 to 4-5, while table 4-6 lists other typical uses, and are useful references for selecting a specific latex.
■ Table 4-1 Paper processing and fiber treatment（impregnated and internal）
Product name
Type
Nipol 1562
NBR
Average
Total
Surface
Viscosity
particle Tg
solid pH
tension
diameter （℃）
（mPa・s）
（%）
（mN/m）
（nm）
41.0 10.0
35
43
50
■ Table 4-4 Non-woven fabrics
Characteristics
Applications
−21 Medium-high nitrile. Soft type.
High nitrile. Standard modified
carboxyl. Good infiltration, adhePaper packing,
sive strength and low
polishing fabrics,
discoloration with paper, fabrics,
gaskets.
and wood. Good oilproof
properties and solvent resistance.
Modified NBR
40.0
8.3
15
28
120
−8
Nipol 1571C2
Modified NBR
45.0
8.5
25
40
120
High nitrile. Further improved on
1571H type by creating lower
−10 bubbling, higher concentration, Gaskets（internal）.
and more stability.
Nipol LX517B
Modified NBR
Modified NBR
Nipol 1577K
Nipol LX511A
NBR
Modified NBR
Nipol LX513
NBR
38.0
40.0
8.0
12
8.0
29
12
38.0 10.0
100
40
20
120
45
40
Medium-high nitrile. More
−16 flexible with less bubbling than
1571H type.
26
Special nitrile. Good oil-proof
properties and adhesiveness,
even though medium nitrile.
Hard type used to reinforce
other NBR latices.
Shoe materials
（impregnated）.
20
30
170
−19 Medium-high nitrile.
45.0 10.0
35
34
140
Medium-high nitrile. Capable of
−31 gelatinization by heat. More
flexible than LX511A.
Gaskets.
■ Table 4-2 Foam rubber
Type
Nipol LX531B
NBR
66.0 11.0
300
34
300
Modified NBR
Characteristics
−12 Medium-high nitrile.
46.0
8.0
20
30
170
Applications
Cosmetic puffs.
Product name
Type
Type
Nipol LX550
Modified NBR
45.0
8.5
250
35
110
nitrile. Soft type for oilproof gloves.
−27 Medium
Film is elastic and strong.
Nipol LX550L
Modified NBR
45.0
8.3
60
35
110
Medium nitrile. Soft type for oilproof gloves and
−27 excellent for thin gloves. Film is elastic and
strong.
Nipol LX551
Modified NBR
45.0
8.5
85
31
120
nitrile. Oilproof gloves. More
−14 Medium-high
oilproof and stronger than LX550.
Nipol LX552
Modified NBR
45.0
8.0
30
28
110
Medium-high nitrile. Oilproof gloves. Greater
−12 gel volume and stronger than LX550 and
LX551.
Product name
7
Average
Surface
Viscosity
particle
Tg
pH
tension
diameter （℃）
（mPa・s）
（mN/m）
（nm）
Total
solid
（%）
LATEX
Characteristics
Applications
Medium-high nitrile. Easy
crosslinking using zinc oxide.
Film is soft and elastic.
oil and solvent
−19 Excellent
resistance. Sharply heatgelatinized by organo
polysiloxane copolymer. More
elastic than 1571H.
Nipol 1571C2
Modified NBR
Average
Total
Surface
Viscosity
particle Tg
solid pH
tension
diameter （℃）
（mPa・s）
（%）
（mN/m）
（nm）
45.0
8.5
25
40
120
Synthetic leather.
Thick non-woven
fabric binders, base of
non-woven fabric
binders for
artificial leather.
Characteristics
Applications
High nitrile. Further improved
1571H type by creating
−10 on
lower bubbling, higher concentration, and better stability.
Floor mats.
■ Table 4-6 Applications
Impregnated Internal
paper and paper and
fabrics
fabrics
Nonwoven
fabrics
Carpets
Gloves
Fiber
treatment
Foam
rubber
◎
Blend with
Leather Adhesives condensation Reinforcement
finishing
resin such
as phenol
Nipol 1562
◎
◎
Nipol 1571H
◎
◎
○
Nipol 1571C2
○
◎
○
Nipol 1571CL
◎
○
○
Nipol 1577K
◎
Nipol LX511A
◎
◎
◎
◎
○
○
Nipol LX513
◎
◎
○
○
○
○
○
Nipol LX517B
◎
◎
○
○
○
○
◎
○
○
○
◎
○
○
○
○
○
○
○
○
◎
◎
Nipol LX531B
■ Table 4-3 Gloves
Characteristics
■ Table 4-5 Carpets
Product name
8.0
Average
Total
Surface
Viscosity
particle Tg
solid pH
tension
diameter （℃）
（mPa・s）
（%）
（mN/m）
（nm）
Average
Total
Surface
Viscosity
particle Tg
solid pH
tension
diameter （℃）
（mPa・s）
（%）
（mN/m）
（nm）
Gaskets and clutch
sheets.
Notes 1. NBR: acrylonitrile-butadiene copolymer
2. Modified NBR: carboxyl acrylonitrile-butadiene copolymer
Product name
Nipol LX511A
High nitrile. Less CI- from 1571H Polishing fab-rics and
−11 type. Low rusting with iron. Good paper（impregnated）,
blend stability with phenol.
and clutch boards.
Polishing fabrics and
gaskets.
46.0
Type
Basic paper for tapes,
clutch sheets, belts,
and hoses.
Nipol 1571H
Nipol 1571CL
Product name
Nipol LX550
○
◎
○
○
Nipol LX550L
○
◎
○
○
Nipol LX551
○
◎
○
○
Nipol LX552
○
◎
○
○
Notes ◎ indicates major applications of the product.
LATEX Product Catalogue
8
LATEX
5 Acrylate latex
Acrylate type latices are copolymerized alkylester acrylic acid and alkylester metacrylic acid, which are based on pure acrylic. These
latices are copolymerized with functional groups such as carbonic acid and monomers such as acrylonitrile and styrene. Major
applications are detailed in tables 5-1 to 5-4, while table 5-5 lists other typical uses, and are useful references for selecting a specific
latex.
■ Table 5-2 Paper processing（impregnated and internal）
■ Table 5-1 Non-woven fabrics
Product name
Type
Total
Surface
Viscosity
Tg
solid pH
tension
（mPa・s）
（℃）
（%）
（mN/m）
Characteristics
Applications
Nipol LX811H
Self-crosslinking
type
50.0
6.5
170
35
1
Standard type. Excellent
resistance to discoloration from
light and age.
Nipol LX814
Self-crosslinking
type
46.0
6.0
30
35
25
Similar but hard type to LX811H. Clothing.
15
Medium-hard. Excellent
Interlining cloth materials
resistance to discoloration from （impregnated）, resin
light and age. Extremely low
cotton, clothing（spray）, and
formalde-hyde.
auto-mobile ceiling materials.
Nipol LX851C
Nipol LX851E
Nipol LX851F2
Nipol LX852B
Self-crosslinking
type
Self-crosslinking
type
Self-crosslinking
type
Self-crosslinking
type
45.0
45.0
45.0
45.0
6.5
6.0
7.0
6.5
20
40
60
80
27
30
30
30
15
Medium-hard. Excellent
resistance to discoloration from
light and age. Extremely low
formalde-hyde.
15
Medium-hard. Excellent
resistance to discoloration from
light and age. Extremely low
formalde-hyde.
Resin cotton, filters and cotton
wool.
−6
Soft type. Excellent adhesiveness, resistant to discoloration from light and age.
Extremely low formaldehyde.
LX852B is included in the Japan
Sanitary Material Industrial
Association’ s list.
Rough blankets, clothing
materials（impregnated）, wet
tissues, sanitation materials
and filters.
Nipol LX854E
Self-crosslinking
type
45.0
6.5
25
27
self-crosslinking than
−10 Stronger
LX852B. Low formaldehyde.
Nipol LX855EX1
Self-crosslinking
type
45.0
6.5
20
28
36
Nipol LX857X2
Nipol LX874
Self-crosslinking
type
Self-crosslinking
type
45.0
45.0
6.5
6.5
30
20
28
26
Countercloth（spray）.
43
Oil filters and non-woven
fabrics for civil engineering.
Product name
Type
Total
Surface
Viscosity
Tg
solid pH
tension
（mPa・s）
（℃）
（%）
（mN/m）
Characteristics
Applications
Polishing paper（filler material）
and special paper.
Nipol LX814
Self-crosslinking
type
46.0
6.0
30
35
25
Nipol LX816A
Self-crosslinking
type
42.0
2.0
30
35
be stabilized with a small
−10 Can
amount of coagulant.
Nipol LX844C
Self-crosslinking
type
40.0
7.5
70
55
32
Hard type. Good waterproofing
properties and resistant to white
discoloration from water.
Air filters（impregnated）
.
Nipol LX852B
Self-crosslinking
type
45.0
6.5
80
30
−6
Soft type.
Filters（internal）and clutch
sheets.
Nipol LX857X2
Self-crosslinking
type
45.0
6.5
30
26
43
Harder than LX855EX1.
Paper knives（impregnated）
.
Nipol LX874
Self-crosslinking
type
45.0
6.5
20
26
Extremely soft type. Good
−31 waterproofing properies and dry
cleaning resistance.
Hard type.
Special paper（internal）
.
Paper processing（filters）
, and
tape paper（impregnated）
.
■ Table 5-3 Fiber treatment
Non-woven fabrics for wood
floor cushions, resin cottons,
and clothing.
Harder than LX851 with good
resistance to washing and dry
cleaning. Extremely low
formaldehyde.
Wet tissues, and ventilation
filters.
Harder than LX855EX1. Low
formaldehyde. Good resistance
to discoloration from light.
Air conditioning filters, and
non-woven fabrics for
engineering.
Spiral spring supporting sheets
Extremely soft with good
of automobile seats, filters,
−31 waterproofing properties and dry clothing materials, clothing,
cleaning resistance.
and automobile
ceiling materials.
Product name
Type
Total
Surface
Viscosity
Tg
solid pH
tension
（mPa・s）
（℃）
（%）
（mN/m）
Characteristics
Applications
Nipol LX851C
Self-crosslinking
type
45.0
6.5
20
27
15
Medium-hard type. Excellent
washing resistance.
Fabric labels（care instruction
labels）
.
Nipol LX851F2
Self-crosslinking
type
45.0
7.0
60
30
15
Medium-hard type.
Canvases（impregnated）
.
Nipol LX852B
Self-crosslinking
type
45.0
6.5
80
30
−6
Soft type.
Glass fibers
（internal）
.
Nipol LX854E
Self-crosslinking
type
45.0
6.5
25
27
−10 Soft type.
Nipol LX855EX1
Self-crosslinking
type
45.0
6.5
20
28
36
Nipol LX874
Self-crosslinking
type
45.0
6.5
20
26
−31 Extremely soft.
Harder than LX851 with good
resistance to washing and dry
cleaning.
Fabric labels（care instruction
labels）
, and canvases
（impregnated）
.
Glass fibers.
Fire hoses（impregnated）
.
■ Table 5-4 Painting materials
Product name
Nipol LX820A
9
LATEX
Type
Reaction type
Total
Surface
Viscosity
Tg
solid pH
tension
（mPa・s）
（℃）
（%）
（mN/m）
55.0
7.5
3,000
36
Characteristics
Good miscibility with pigments
−43 and especially good spreading
at low temperature.
Applications
Multi-layered elastic paints.
LATEX Product Catalogue
10
LATEX
6 Soap-free latex
Ⅰ．Colloid characteristics
Ⅱ．Polymer characteristics
（1）Low thixotropy, displays flow properties similar to newtonian
flow（solvent-like movement）
■ Table 5-5 Applications
Product name
Impregnated Internal Non-woven
paper and paper and
fabrics
fabrics
fabrics
Nipol LX811H
○
Nipol LX814
◎
Nipol LX816A
○
○
◎
Fiber
treatment
Flocky
Leather
finishing
Adhesives
◎
○
○
○
○
◎
○
○
○
○
○
Pigment
printing
○
○
Nipol LX820A
Nipol LX844C
◎
○
○
◎
○
◎
○
○
Nipol LX851E
◎
○
○
○
○
Nipol LX851F2
◎
○
◎
○
○
◎
○
◎
○
Nipol LX854E
○
Nipol LX855EX1
○
Nipol LX857X2
◎
Nipol LX874
◎
◎
○
○
Note ◎ indicates major applications of the product.
11
LATEX
◎
○
◎
◎
○
◎
○
○
◎
（5）Good mechanical stability
◎
○
Total
solid
（%）
pH
Nipol SX1105A
Styrene-butadiene
copolymer
Fluidity, miscibility with
alcohol, film composition,
close adherence, rubberlike elasticity, flexibility.
45.0
7.0
250
42
1.02
100
0
Nipol SX1503A
Acrylonitrile
butadiene copolymer
Fluidity, miscibility with
alcohol, film composition,
close adherence, rubberlike elasticity, flexibility,
solvent resistance.
42.0
7.0
180
44
1.00
50
−20
Nipol SX1706A
Ester acrylic acid
copolymer
Fluidity, miscibility with
alcohol, film composition,
close adherence, weather
resistance, trans-parency,
decomposibility.
48.0
7.4
220
41
1.08
100
0
○
Viscosity Surface
tension Specific
（mPa・s）（mN/m） gravity
Average
particle
Tg
diameter （℃）
（nm）
Characteristics
○
○
（5）Close adherence and adhesiveness to a variety of materials
（6）Dramatically improves the size of impregnated paper
（7）Good solvent resistance of latex-coated paper
（8）Latex-coated paper is decomposable!
（9）Low particle dissolution with less bleeding
Polymer composition
Product name
○
◎
◎
○
Reinforcement
○
Nipol LX851C
Nipol LX852B
Paints
（2）Good miscibility with water solvents, such as alcohol
（3）Good miscibility with various synthetic resins
（4）Good fluidity for coating, enables a consistant coating without
causing craters on the surfaces of various materials
（1）Good film composition
（2）Can form a film with high Tg at relatively low temperatures
（3）Good blocking resistance（low viscosity）
（4）Good balance between impairing strength and impairing
elasticity of unvulcanized polymer film
LATEX Product Catalogue
12
LATEX
Instructions for handling latex
Instructions for storing latex
Warning
* Detailed instructions for handling latex are provided in the Safety Data Sheet（SDS）published by ZEON Corporation.
〈Handling〉
1. Wear proper protection
（goggles, gloves,
safety shoes, and working uniforms）.
If allowed to come into contact with the
eyes, latex may cause inflammation,
itching, or damage to the cornea.
Latex may cause inflammation or itching
if allowed to contact the skin.
2. Ventilation systems, hand washers and
eye washers are required.
（1）Latex are water soluble and are not volatile at
n o r m a l t e m p e r a t u r e s . H o w eve r, i f y o u
experience nausea from inhal-ing the odor of a
latex, move into a different room for fresh air.
3. Do not drain or discard latex into a river.
Do not try to clean or remove spilled
latex with water; this will only further
diffuse the latex.
Spilled latex are environmental pollutants
with harmful affects on animals, plants,
and drinking water.
Promptly contact the proper authorities
for an appropriate action in the event
latex and latex compounds leak into
restricted areas.
4. Exercise caution when handling latex in
unusual operations or conditions.
Instructions provided in this catalog are only intended for normal uses.
（2）If latex come into contact with the skin or the
eyes, wash the affected area thoroughly.
（3）If latex and latex compound are taken into your
mouth, rinse your mouth thoroughly and seek
professional assistance.
〈Storage〉
1. Store latex in tightly sealed containers.
Exposure to air may result in the formation of a film
or emulsion, or be decomposed by bacteria.
2. Store latex at tem-peratures between 5°C
~ 40°C.
Exposure to direct sunlight may cause the formation of film or alter the viscosity due to the high
temperatures.
Latex become unusable when frozen.
13
LATEX
3. Latex stored for long periods of time must
be stirred and filtered before use.
Stirring helps redistribute uneven, settled latex,
which have a large specific grav-ity. Filtering latex
break up coagulation, emulsion and films.
4. Containers for storing latex must always
be used.
When storing latex in con-tainers, other than those
originally supplied by the manufacturer, use
stainless steel with corrosion resistant glass or
resin linings.
LATEX Product Catalogue
14
ZEON Corporation Latex Division
1-6-2 Marunouchi, Chiyoda-Ku, Tokyo 100-8246, Japan
Tel :+81-3-3216-2344 Fax:+81-3-3216-0504
http://www.zeon.co.jp
June 2015
0615005
（MB-MC）