LISTA DE PRECIOS PARA MEXICO REPRESENTACION EN MEXICO

Transcription

LISTA DE PRECIOS PARA MEXICO
2008-B
CONFIDENCIAL - INFORMACION DISTRIBUIDORES
REPRESENTACION EN MEXICO
www.eadvantage.com.mx
Calle Zubiran Num. 4006 Col. Dale Chihuahua, Chih. C.P. 31050
Tel. / Fax. (614) 492-3019 LADA SIN COSTO: 01-800-000-4428
2008 Lista de Precios. Revision B
www.eadvantage.com.mx/applied-motion
CONFIDENTIAL
Contents
Pricing and Order Policies
3
Stepper Product Section
5
STM Drive+Motor
6
DC Input Drives 7
DC Input Drives with Control 9
ST Series DC Input Drives 10
STAC6 AC Input Drives with Control
13
STAC6 Encoders
14
STAC6 Ordering Checklist
15
AC Input Drives with Control
16
AC Input Drives
17
Motor Controllers and Multi-axis Hubs
18
Operator Interfaces
18
Power Supplies
19
Accessories
19
Stocked Step Motors
20
Non Stocked Step Motors
24
Step Motor Modifications
25
Optional Step Motor Encoders
26
Gearmotors
27
Servo Product Section
29
DC Input Servo Drives
30
AC Input Servo Drives
31
BLuAC5 Ordering Checklist
30
Servo Drive Accessories
34
Servo Motor Cables
35
Servo Motors Part Numbering
37
N Series Servo Motors- NEMA17
39
40
41
M Series Servo Motors Metric 40mm
42
43
44
45
A Series Servo Motors
46
ValueLine Servo Motors
47
Gearhead Product Section
49
Prime Planetary Gearheads
50
Primetric Planetary Gearheads
51
Paragon Planetary Gearheads
52
ValueGear Planetary Gearheads
53
Appendix
54
Warranty Information
55
2
Pricing and Order Policies
5. SHIPMENT DELAYS - Applied Motion Products,
Inc. will use its best efforts to fill accepted purchase
orders as promptly as possible. Applied Motion will
use its best efforts to advise the Customer in advance of any delay in shipment of products ordered
by the Customer.
All prices are F.O.B. Watsonville, California. Shipments
will be freight “collect” unless otherwise specified. In
case of U.P.S., or like service, shipment charges will be
prepaid and billed to the customer.
Applied Motion Products, Inc. shall not be liable for
any defaults or damages caused by delay of product
shipment due to conditions beyond Applied Motion Products control, including, but not limited to
acts of God, strike, boycott, lockout, or other labor
troubles, war, riot, flood, government regulations,
or delays of subcontractors or suppliers of Applied
Motion Products.
2. PAYMENT TERMS - Subject to the approval of Customer credit, all invoices are due and payable 30 days
from the date of shipment as stated on the packing
slip.
3. ORDER SCHEDULING - All motor order quantities
greater than 249 or drive/power supply orders greater
than 24 may be scheduled for two (2) shipments within
six (6) months from the original order date. All other
order quantities must be shipped on the basis of one
order one shipment.
6. RETURNS - All product returns must be accompanied by an Applied Motion Return Authorization
Number, which has been requested from, and issued by, Applied Motion Products. Custom products
cannot be returned for credit.
7. DROP SHIPMENTS - Applied Motion will drop
ship directly to a distributor’s customer based on
shipping instructions as stated on the distributor’s
order. The customer’s “ship to” address must be in
the distributor’s authorized territory as determined
by Applied Motion Products. A $35.00 charge will
be added to the invoice for all drop shipments other
than overnight or 12nd day air services. For drop
shipments with special circumstances (customer
down unit, shipment to another authorized distributor branch, etc.) please consult the factory. Applied
Motion will not do drop shipments outside of the
United States.
4. PACKAGING - All products will be bulk packed when
possible. If individual packing is required it must be
clearly specified. Applied Motion reserves the right to
individually pack all or any portion of products ordered
at its convenience.
3
CONFIDENTIAL
1. GENERAL - All prices are subject to change without
notice. Applied Motion will use its best efforts to provide at least 30 days notice before any price change
becomes effective. However, this may not always be
possible.
CONFIDENTIAL
4
5
CONFIDENTIAL
Stepper Product Section
www.eadvantage.com.mx/applied-motion.com
STM Drive+motor Series
CONFIDENTIAL
Part No
1 - 99
STM23S-2AN
S Model , Size 2, RS-232, No Encoder
$327.40
STM23S-2RN
$381.70
STM23S-2AE
S Model , Size 2, RS-232, Encoder
$493.90
STM23S-2RE
$524.70
STM23Q-2AN
Q Model , Size 2, RS-232, No Encoder
$436.70
STM23Q-2RN
$489.50
STM23Q-2AE
Q Model , Size 2, RS-232, Encoder
$672.10
STM23Q-2RE
$673.20
STM23S-3AN
$375.10
STM23S-3RN
$409.20
STM23S-3AE
$518.10
STM23S-3RE
$540.10
STM23Q-3AN
$487.30
STM23Q-3RN
$517.00
STM23Q-3AE
$699.60
STM23Q-3RE
$700.70
STM23 Drive+Motor
Input STM23 - 12-70VDC
Anti-Resonance
Demand Signal Smoothing
Torque Ripple Smoothing
Included:
Mating Connectors
Software
Programming Cable
Options:
Encoder feedback
Starting at:
Programmable:
Command Options:
Communications:
Inputs:
Outputs:
Error Display:
Dedicated Inputs:
Dedicated Outputs:
327.40
Q
SCL
Step and Direction
RS232
RS485
3
1
2 LED’s
Limits/Alarm Reset/Enable/Jog
Alarm/Brake/Motion
Approvals:
CE
- Pending
STM23S-2AN
Series
STM Series
Feedback
N = None
E = 1000 line encoder
Frame Size
23
Control
S = Basic version
Q = Q Programmer
Motor Size
2 = 125 oz-in max
3 = 210 oz-in max
6
Velocity
Communications
A = RS-232
R = RS-485
DC Input Drives
1 - 99
1030
$130.90
- Std Configuration, 1A, 60 Idle Current, (1000-159-015)
1035D
$295.90
2035
$148.50
2035O
$180.40
2035XD
$284.90
3535
$223.30
3535O
$243.10
3540M
$217.80
3540MO
$273.90
7080
$423.50
1030 Open Frame Stepper Drive
1035D Dual Axis Stepper Drive
Output 35 VDC
Output 30 VDC
Current 1.0A
Step and Direction
Full and Half Step
Idle Current Reduction
Pluggable Connectors
Step and Direction
Full, Half and Eighth Step
Header connections
130.90
2035-O Open Frame Stepper Drive
Output 35 VDC
Current 2.0A
Current 2.0A
Oscillator
Full and Half step
Screw Terminals
Step and Direction
Full and Half Step
Screw Terminals
148.50
Approvals:
CE
295.90
Output 35 VDC
Current 1.0A
Approvals:
CE
Approvals:
CE
180.40
7
CONFIDENTIAL
Part No
CONFIDENTIAL
DC Input Drives - (cont)
3535-O Open Frame Stepper Drive
Output 35 VDC
Current 3.5A
Output 35 VDC
Oscillator
Full and Half step
Screw terminals
243.10
Approvals:
CE
223.30
2035XD Dual Axis Stepper Drive
284.90
Output 40 VDC
Current 3.5A
Step and Direction
Half Step
Microstepping
Screw terminals
Approvals
RoHS
3540MO Open Frame Stepper Drive
217.80
Approvals:
CE
RoHS
Output 40 VDC
Current 3.5A
Oscillator
Half Step
Microstepping
Joystick Control
Screw terminals
273.90
Approvals:
CE
3540M Open Frame Stepper Drive
Output 35 VDC
Current 2.0A
Dual Axis
Step and Direction
Oscillator
Microstepping
Software Setup
RS232
Screw terminals
Included:
Software
Programming Cable
Current 3.5A
Step and Direction
Full and Half Step
Screw Terminals
Output 80 VDC
Current 7.0A
Step and Direction
Microstepping
Screw terminals
Approvals:
CE
RoHS
423.50
8
Approvals:
CE
DC Input Drives with Controls
1 - 99
1240i
$282.70
1240i-485
$282.70
3540i
$327.80
ENC485 ( 1000-175, optional Encoder/RS485 board for 3540i)
$88.00
7080i
$737.00
3540i Programmable Stepper Drive
1240i Programmable Stepper drive
Output 40 VDC
Current 3.5A
Si Software
SCL
Microstepping
Software Setup
Screw terminals
Approvals:
CE
RoHS
Included:
Software
Programming Cable
Output 12-40 VDC Current 1.2A
Si Software
SCL
RS232
Microstepping
Screw terminals
Options:
RS485
Encoder Feedback
Included:
Software
Programming Cable
327.80
Options:
RS485
Approvals:
RoHS
282.70
7080i Programmable Stepper Drive
Output 80 VDC
Current 7.0A
Si Software
SCL
Microstepping
Software Setup
Screw terminals
Included:
Software
Programming Cable
9
737.00
Approvals:
CE
RoHS
CONFIDENTIAL
Part No
ST Series DC Input Drives/Controls
CONFIDENTIAL
ST5/10-S Stepper Drive
Input ST-5 - 24-48VDC
ST10- 24-80VDC
Programmable:
Command Options:
Communications:
Current ST-5 - 5A
ST10- 10A
Inputs:
Outputs:
Anti-Resonance
Error Display:
Dedicated
Inputs:
Dedicated Outputs:
Approvals:
CE
RoHS
Included:
Mating Connectors
Software
Programming Cable
SCL
Step and Direction
Analog
RS232
3
1
2 LED’s
Stop/Run, Dir, X3 ( choose one)
Alarm/Brake/Motion/tach
(choose one)
Starting at:
324.50
ST5/10-Q Si Stepper Drive
Input ST-5 - 24-48VDC
ST10- 24-80VDC
Programmable:
Command Options:
Communications:
Current ST-5 - 5A
ST10- 10A
Inputs:
Outputs:
Anti-Resonance
Error Display:
Dedicated
Inputs:
Dedicated Outputs:
Included:
Mating Connectors
Software
Programming Cable
Options:
RS 485
Encoder feedback
Approvals:
CE
Pending
RoHS
Si
Q
SCL
Step and Direction
Velocity
RS232
8+2
4
2 LED’s
Alarm/Brake/Motion
Starting at:
ST5-Si-RE
Series
ST Series
Output Current
5 = 5A
10 = 10A
Feedback
(not available on S version)
N = None
E = Encoder - ST-ENC Option Board
Control
S
Q
Si
Communications Option Board
(not available on S version)
N = None
R = RS485 Option Board
10
495.00
Part No
1-99
5A, S version , RS-232 - No options available
$324.50
ST5 - Q-NN
5A, Q version , No options fitted
$495.00
ST5 - Q-RN
5A, Q version , RS-485 option
$577.50
ST5 - Q-NE
5A, Q version, Encoder option
$577.50
ST5 - Q-RE
5A, Q version, RS-485 and Encoder options
$660.00
ST5 - Si-NN
5A, Si version, No options fitted
$495.00
ST5 - Si-RN
5A, Si version, RS-485
$577.50
ST5 - Si-NE
5A, Si version, Encoder option
$577.50
ST5 - Si-RE
5A, Si version, RS-485 and Encoder options fitted
$660.00
ST10 - S
10A, S version , RS-232 - No options available
$434.50
ST10 - Q-NN
10A, Q version , No options fitted
$605.00
ST10 - Q-RN
10A, Q version , RS-485 option
$687.50
ST10 - Q-NE
10A, Q version, Encoder option
$687.50
ST10 - Q-RE
10A, Q version, RS-485 and Encoder options
$770.00
ST10 - Si-NN
10A, Si version, No options fitted
$605.00
ST10 - Si-RN
10A, Si version, RS-485
$687.50
ST10 - Si-NE
10A, Si version, Encoder option
$687.50
ST10 - Si-RE
10A, Si version, RS-485 and Encoder options fitted
$770.00
Part No
1-99
11
CONFIDENTIAL
ST5 - S
ST Encoders
CONFIDENTIAL
Feedback options
1-9
WAA Option
Differential encoder - encoder mounted on HT17 motor
$199.10
ZAA option
$199.10
YAA Option
$199.10
NOTES
WAA, ZAA and YAA are 2000 line differential encoder with connector. To order this option add this suffix to the motor part number. When an encoder is used the motor must have rear shaft option. eg. HT23-400D-ZAA
Encoder Cables
These are not included with encoders and must be ordered separately
ST-ENC-CA-10
(3004-195-10)
10ft Cable for Differential Encoder to ST Q & Si Series
drives
1-9
$44.00
ST-ENC-CA-10
JAE F1W15S
HD15 ‘D’ type
JAE F1W15S
APPLIED MOTION
3004-195-XX
To 970-1001
Encoder
To BLu /ST/STAC6 Drives
12
STAC6 AC Input Drives with Control
STAC6 Stepper Drive
Programmable:
Command Options:
Communications:
Anti-Resonance
Inputs:
Outputs:
Error Display:
Dedicated Inputs:
Dedicated Outputs:
Current 6 Peak
Included:
Mating Connectors
Software
Programming Cable
Options:
S, Q or Si Versions
Expanded I/O ( QE)
Approvals:
CE
UL
RoHS
SCL (Based on version)
Si
Q
Step and Direction
Analog
RS232
RS485
7 ( S & Q) 15 ( Si, SE, QE )
3 ( S & Q) 7 ( Si, SE, QE )
2 LED’s
Alarm/Brake/Motion
(110V version)
Starting at:
874.50
Drives and Motors - 110VAC Version
STAC6 Stepper drives
1 - 99
STAC6 - S
$874.50
STAC6 - Q
$1,094.50
STAC6 - QE ( expanded I/O )
$1,232.00
STAC6 - Si
$1,094.50
Motors
1 -99
Motors
1 -99
High Torque NEMA 23
High Torque NEMA 34
HT23-548
$127.40
HT34-488
$371.80
HT23-549
$146.90
HT34-489
$461.50
HT23-550
$176.80
HT34-490
$600.60
Drives and Motors - 220VAC Version
STAC6 Stepper drives
1 - 99
STAC6-220 - S
$984.50
STAC6-220 - Q
$1,204.50
STAC6-220 - Si
$1,204.50
Motors
1 -99
Motors
High Torque NEMA 23
HT23-552
$202.80
HT23-553
$217.10
HT23-554
$257.40
1 -99
High Torque NEMA 34
PRICING NOTES
HT34-495
$371.80
HT34-496
$461.50
HT34-497
$608.40
Pricing shown is for single shaft motors, add $5.20 to motor price along with a "D" at the end of the part number if you want
to order a standard double shaft motor. This adder does not apply to any part number on price list that ends with a “D”.
13
CONFIDENTIAL
Input 90-240 V
STAC6 Encoders
CONFIDENTIAL
Feedback options
1-9
ZAA option
$199.10
YAA Option
$199.10
NOTES
ZAA and YAA are 2000 line differential encoder with connector. To order this option add this suffix to the motor part number.
When an encoder is used the motor must have rear shaft option. eg. HT23-550D-ZAA
ZAA and YAA encoder mounted on HT23 and HT34 motor. Please note encoder is
same size for both options.
Encoder Cables
ST-ENC-CA-10
(3004-195-10)
1-9
10ft Cable for Differential Encoder to STAC6 Series drives
$44.00
ST-ENC-CA-10
JAE F1W15S
HD15 ‘D’ type
JAE F1W15S
APPLIED MOTION
3004-195-XX
To 970-1001
Encoder
14
Software
Configurator
Voltage -110VAC
Disc included with all drives
STAC6 - S
Q Programmer
STAC6 - Q
Disc included with drive
STAC6 - Si
Si Programmer
Voltage -220VAC
Mating Connectors
STAC6 - 220- S
STAC6 - 220 - Q
Include all
STAC6 - 220 - Si
All mating connectors included with drive
Step Motor 110V
HT23-548D
HT23-549
HT23-549D
HT23-550
HT23-550D
HT34-488
HT34-488D
HT34-489
HT34-489D
HT34-490
HT34-490D
Encoder
Double Shaft
Size 23
HT23-548
Single Shaft
HT23-552
HT23-552D
HT23-553
HT23-553D
HT23-554
HT23-554D
Size 34
Size 23
Double Shaft
Size 34
Single Shaft
Step Motor 220V
HT34-495
HT34-495D
HT34-496
HT34-496D
HT34-497
HT34-497D
Accessories
(requires double-shaft motor):
BOB1
ZAA
Breakout board for IN/OUT1 connector; comes
with DB-25 extension cable
for NEMA 23 motors:
2000 line, index, differential outputs
BOB2
breakout board for IN/OUT2 connector; comes
YAA
for NEMA 34 motors:
2000 line, index, differential outputs
MMI-01
operator interface for Si and SiNet Hub
applications only
Encoder Cables
Si Net Hub 444
multi-axis sequencer to control up to 4 drives
ST-ENC- CA -10
encoder cable, 10 feet
Si Net Hub 8
15
CONFIDENTIAL
Drive Version
Standard
CONFIDENTIAL
AC Input Drives with Control
Part No
1 - 99
Si2035
$632.50
Si3540
$823.90
Si5580
$1,318.90
Si2035 Packaged Stepper Drive
Output 35 VDC
Current 2.0A
Si Programming
SCL
Microstepping
110/220VAC Input
Output 40 VDC
Current 3.5A
Si Programming
SCL
Microstepping
110/220VAC Input
Included:
Included:
Mating Connectors
Software
Programming Cable
Approvals:
CE
632.50
Output 80 VDC
Current 5.5A
Si Programming
SCL
Microstepping
110/220VAC Input
Included:
Approvals:
CE
Mating Connectors
Software
Programming Cable
1,318.90
16
Mating Connectors
Software
Programming Cable
823.90
AC Input Drives
1 - 99
PDO2035
$533.50
PDO3540
$715.00
PDO5580
$984.50
PDO2035 Packaged Stepper Drive
Output 35 VDC
Current 2.0A
Step and Direction
Full and Half Step
Microstepping
Oscillator
110/220VAC Input
Output 40 VDC
Current 3.5A
Step and Direction
Full and Half Step
Microstepping
Oscillator
110/220VAC Input
Included:
Included:
Mating Connectors
533.50
Mating Connectors
Approvals:
CE
715.00
Output 80 VDC
Current 5.5A
Step and Direction
Full and Half Step
Microstepping
Oscillator
110/220VAC Input
Included:
Mating Connectors
Approvals:
CE
984.50
17
CONFIDENTIAL
Part No
Motor Controllers and Multi-axis Hubs
CONFIDENTIAL
Part No
1 - 99
SiNet Hub 8
$383.90
SiNet Hub 444
$251.90
Si100
$689.70
Si Net Hub 8 Multi- Port Hub
Si Net Hub 444 Multi- Port Hub
Si Net Hub Programmer
SCL Router
4 Ports
4 Inputs and 4 Outputs
Si Net Hub Programmer
SCL Router
8 ports
Included:
Included:
Connection cables
Software
Programming Cable
Connection cables
Software
Programming Cable
Options: DIN Rail Mount
383.90
251.90
Si100 Single Axis Controller
Si Programming
SCL
Microstepping
110/220VAC Input
Included:
Mating Connectors
Software
Programming Cable
689.70
Operator Interfaces
Part No
1-9
MMI-01
$545.60
MMI-02 - Backlit version
$652.30
MMI 01 Operator Interface
For use with : Si 100 and all Si
series servo and
Stepper drives
Included:
18
Connecting Cables
Software
Programming Cable
Options: Backlit version
545.60
Power Supplies
Part No
1 - 99
$382.80
PS1050
$759.00
Accessories
RC 050 Regneration clamp
BOB1 & BOB2 Break Out Boards
50w
Plugs to 25 way ‘D’ on drive
Din rail mount
165.00
Included: 3 ft Connection cables
Part Number
137.50
1 - 99
BOB1
BOB2
Break Out Module
$137.50
Break Out Module
$137.50
RC-050
Regeneration Clamp
$165.00
3004-189
Programming cable for Si and all STAC6 models
$27.50
3004-190
Hub/MMI Cable
$11.00
Firmware upgrade
$165.00
Connector Kit - specify drive model when ordering
$41.80
Printed manual - specify drive model when ordering
(all drive manuals available for free download from web site)
$27.50
19
CONFIDENTIAL
PS430
CONFIDENTIAL
Stocked Step Motors
Stocked motors ( including double shaft versions) are typically held in stock in Watsonville, CA for immediate delivery. They
are also often part of a recommended motor drive combination. Details and Torque curves are available on the web site,
www.applied-motion.com
High Torque NEMA 08
HT08 Step Motors
1 - 99
HT08-020
$102.70
HT08-021
$122.20
"L"
.059 ± 0.008
.59 ± .039
.36
18” MIN
NOTES
Pricing shown is for single shaft motors, add
$5.20 to motor price along with a “D” at the
end of the part number if you want to order a
standard double shaft motor.
2X .78 ±.019
Ø .0157
Length
L (Inch)
HT08-020
HT08-021
HT11-013
$122.20
HT11 Step Motors
“L”
.06 ± 0.008
.787 ± .02
2X 1.10 ±.012
2X .906 ±0.01
0
Ø .1968 -0.012
Length
2X #4-40 UNC
ON A Ø19.05(.750)
BOLT CIRCLE
NEMA 14
5014-842
$98.80
L (Inch)
HT11-012
HT11-013
Ø .8660
+0
-.001
4X M2.6 X .45
Notes 1) Drawing shown with optional rear shaft.
2) Encoder holes only on dual shaft version.
1.32
1.87
NEMA 14 Step Motors
1 - 99
$76.70
18” MIN
.394 ±.04
NOTES
Pricing shown is for single shaft motors, add
$5.20 to motor price along with a “D” at the
end of the part number if you want to order
a standard double shaft motor.
5014-820
4X M2
+0.000
Ø.59 -0.001
1 - 99
$102.70
+0.000
-0.0001
1.18
1.81
High Torque NEMA 11
HT11-012
2X .63±0.008
“L”
.059
12” MIN
.559± .014
NOTES
Pricing shown is for single shaft motors, add $5.20
to motor price along with a “D” at the end of the
part number if you want to order a standard double
shaft motor.
2X 1.024
+0.000
2 X Ø .1968
- 0.004
2X 1.38
.39
2X 0.25
Lenght
2X #2-56
ON A Ø0.75 B.C.
20
5014-820
5014-842
L (Inch)
1.00
1.57
Ø .866
+0.000
- 0.001
2X #4-40
STUDS
www.eadvantage.com.mx/applied-motion.com
Stocked Step Motors (cont)
1 - 99
NEMA 17
5017-006
$49.40
5017-013
$66.30
HT17 Step Motors
High Torque NEMA 17
HT17-068
$67.60
HT17-071
$70.20
HT17-075
$84.50
NOTES
“L”
.080
.79± 0.01
.591± 0.01
12” MIN
4 x #4-40 UNC
.17 DEEP
Ø.1968
Pricing shown is for single shaft motors, add $5.20 to motor
price along with a “D” at the end of the part number if you
want to order a standard double shaft motor.
+.0000
- .0004
2 x 1.220
FLAT
.177± .006
FLAT
.177± .006
2 x #2-56 UNC
ON Ø.75 BCD
Part Number
NEMA 23
2 x 1.65
Length
L (Inch)
HT17-068
HT17-071
HT17-075
.59± 0.02
Ø.866
+.000
- .001
1.3
1.54
1.85
NEMA 23 Step Motors
1 - 99
"L"
.190
4023-819
4023-820
5023-100
$85.80
5023-122
$110.50
5023-167D #
$143.00
5023-499
$87.10
4023-828
4023-830
$123.50
5023-123
$166.40
5023-168D #
$197.60
4023-835
$187.20
5023-124
$236.60
5023-169D #
$262.60
"L"
.060
18.0 Typ
4X Ø.205±.01
Ø.25
REF
0
Ø.25-.005
MOUNTING
END
Ø1.5±.002
.75
2X 1.856
2X 2.22
.81±.03
Motor Length (inch)
NOTES
2.00
2.25
3.0
4.0
4023-819
5023-499
4023-828
4023-835
4023-830
5023-124
5023-100
5023-123
5023-169D
5023-122
5023-168D
4023-820
# denotes motor with 10ft cable
want to order a standard double shaft motor. This adder does
not apply to any part number on price list that ends with a
“D”.
5023-167D
21
CONFIDENTIAL
Part Number
www.eadvantage.com.mX/applied-motion
CONFIDENTIAL
HT23
HT23 Step Motors
18” MIN
1 - 99
.197
.59± 0.001
Ø1.50± 0.001
.063
4 x Ø.205± 0.01
.591± 0.01
Ø.250
Ø.250
.228± 0.006
FLAT
2 x 1.11
2 x 2.22
+.000
- .001
2 x 1.856
+.000
- .001
2 x #4-40 UNC
ON Ø1.82 BCD
.630± 0.039
.787± 0.020
2 x #4-40 UNC
ON Ø.75 BCD
.228± 0.006
FLAT
Motor Length (inch)
1.54
2.13
2.99
HT23-393
HT23-396
HT23-399
HT23-394
HT23-397
HT23-400
HT23-395
HT23-398
HT23-401
1.7”
2.16”
3.05”
HT23-549D
HT23-550D
$117.00
HT23-399
HT23-400
HT23-401
$148.20
HT23-548D #
$127.40
HT23-549D #
$146.90
HT23-550D #
$176.80
NEMA 34
1 - 99
1.19± .03
.19
HT23-396
HT23-397
HT23-398
NEMA 34 Step Motors
1.19±.04
$102.70
NOTES
HT23-548D
"L
HT23-393
HT23-394
HT23-395
Ø2.875±.002
18” approx
4X Ø .216±.01
Ø3.38
MAX
+0
2X x Ø .3750 - 0.005
.063
MOUNTING
END
2X 2.74
2X 3.26
MAX
3.7
5.1
5034-348
4034-329
4034-334
5034-367D
5034-349
5034-350
5034-368D
5034-369D
$198.90
5034-367D#
$236.60
4034-329
$250.90
5034-349
$283.40
5034-368D#
$322.40
4034-334
$361.40
5034-350
$364.00
5034-369D#
$386.10
NOTES
Motor Length (inch)
2.50
5034-348
22
Model
L
HT34-474
HT34-476
HT34-478
2.6
3.78
4.96
L
4X Ø.218THRU
Ø 2.875±.002
.39
0.08
90.0°
4 x .45
+.000
- .005
Ø.50
+.0000
- .0005
90o
.98±.01
1.12±.04
FLAT
1.34±.04
1.46±.04
2X 2.74±.01
2X #4-40 UNC TAP 5(.2) DEEP 180°
APART ON A Ø46.02(1.812) B.C.
3.38±.0
High Torque NEMA 34
1 -99
HT34-474
$280.80
HT34-476
$373.10
HT34-478
$442.00
HT34-485
$273.00
HT34-486
$364.00
HT34-487
$503.10
HT34-488 (with 10’ cable)
$371.80
$461.50
$600.60
HT34 Step Motors HT-485/486/487
Lenght
HT34-485
HT34-486
HT34-487
Shaft
L
3.11
4.63
6.14
L
D
HT34-485
HT34-486
HT34-487
.330
.062
0.5
0.5
0.625
Ø 2.875±.002
4X Ø.218THRU
1.12±.04
shaft
D
2X 2-56 UNC
5(.2) DEEP ON
A Ø1.28(32.5) B.C.
3.38±.02
Ø .3750
1.25±.02
2X #4-40 UNC TAP 5(.2) DEEP 180°
APART ON A Ø46.02(1.812) B.C.
2X 2.74±.01
Lenght
HT34-488
HT34-489
HT34-490
Shaft
L
3.11
4.63
6.14
L
HT34-488
HT34-489
HT34-490
.330
.062
D
0.5
0.5
0.625
Ø 2.875±.002
4X Ø.218THRU
1.12±.04
shaft
D
2X 2-56 UNC
5(.2) DEEP ON
A Ø1.28(32.5) B.C.
3.38±.02
Ø .3750
2X #4-40 UNC TAP 5(.2) DEEP 180°
APART ON A Ø46.02(1.812) B.C.
1.25±.02
2X 2.74±.01
NOTES
Pricing shown is for single shaft motors, add $5.20 to motor price along with a "D" at the end of the part number if you
want to order a standard double shaft motor. This adder does not apply to any part number on price list that ends with a
“D”.
23
CONFIDENTIAL
CONFIDENTIAL
Non Stocked Step Motors
Non-Stocked motors are not typically held in stock. They will be held for distributors/customers placing blanket orders. Lead time for units not available from stock is 12-16 weeks.
Each order for less than 10 pieces of Non Stocked motors will incur a $97.50 processing fee per order, in
addition to the product price.
Part No
NEMA 14
1-99
5014-833
$105.30
NEMA 17
5017-008
$55.90
5017-009
5017-011
$61.10
5017-014
$74.10
High Torque NEMA 17
HT17-069
HT17-070
$96.20
HT17-072
HT17-073
HT17-074
$97.50
HT17-076
HT17-077
$115.70
NEMA 23
4023-839
5023-019
$120.90
4023-823
$119.60
5023-094
$120.90
5023-149
$195.00
4023-833
$258.70
NEMA 34
4034-322
4034-324
4034-326
$232.70
NEMA 42
5042-023D
$1,315.60
PRICING NOTES
▪▪ Pricing shown is for single shaft motors, add $5.20 to motor price along with a "D" at the end of the part
number if you want to order a standard double shaft motor. This adder does not apply to any part number on
price list that ends with a “D”.
▪▪ “D” at the end of the part number denotes that the motor already comes with a double shaft as standard.
24
Step Motor Modifications
*Qty 1-24/each
Encoder Holes on Endbell
Customer specified
$22.75
Shorten Shaft
+/-.02” length
$22.75
Flat on Shaft
+/-.006” thickness
$22.75
2 Flats on Shaft
+/-.006” thickness
$45.50
Perpendicular Hole in Shaft
+/-.002” diameter
$22.75
Turn Down Shaft Diameter
+000/-.0005” diameter
$22.75
Slot in End of Shaft
+/-.005” width
$22.75
Add Keyway
Customer specified
$32.50
Axial Hole through Shaft
+/-.002” diameter
$32.50
Set-Up Charge per release/shipment
$253.50
*For quantity 25 and greater: Consult factory for Quotation.
NOTES
Not all motors can be modified with the options in the above list, consult factory for details.
Important notes regarding terms and policies on custom motor modifications can be found in the appendix
on page 55.
25
CONFIDENTIAL
Tolerances
Step Motor Encoders
CONFIDENTIAL
Feedback options
1-9
WAA Option
$199.10
ZAA option
$199.10
YAA Option
$199.10
NOTES
WAA, ZAA and YAA are 2000 line differential encoder with connector. To order this option add this suffix to the motor part number. When an encoder is used the motor must have rear shaft option. eg. HT23-400D-ZAA
Encoder Cables
ST-ENC-CA-10
(3004-195-10)
1-9
10ft Cable for Differential Encoder to ST Q & Si Series
drives
$44.00
ST-ENC-CA-10
JAE F1W15S
HD15 ‘D’ type
JAE F1W15S
APPLIED MOTION
3004-195-XX
To 970-1001
Encoder
NOTES
For previous encoder versions offered by Applied Motion Products, please consult the factory. These may
still be available for applications requiring suitable volumes.
26
Gearmotors
1 - 24
17068-2-05S
17068-2-10S
17068-2-18S
HT17-068P 5:1 spur gearhead
$396.50
17071-2-05S
17071-2-10S
17071-2-18S
$400.40
17075-2-05S
17075-2-10S
17075-2-18S
$513.50
23820-2-05S
23820-2-10S
23820-2-18S
4023-820P 5:1 spur gearhead
$607.10
23828-2-05S
23828-2-10S
23828-2-18S
$694.20
NOTES
“S” at the end of the part number, denotes a single shaft motor. Add $5.20 to Step Motor Gearhead price for double
shaft along with a “D” to part number, in place of the “S” for double shaft.
i.e. 17068-2-05D
HT17 Step Gearmotors
L -inch
POWER
LENGTH “L”
.187 TYP.
17068-S-x
2.275
17071-S-x
2.51
17075-S-X
2.82
4X M3 THREADED BRASS
INSERT THRU FLANGE
1.650
TYPICAL
2X .47 FLAT
.225 FLAT
2X 90° APART
CL GEARHEAD SHAFT
CL
CL STEP MOTOR
.2500 Ø
.2495
STEP MOTOR
.310
.710Ø
.120
.790±.020
1.220
TYPICAL
23 Step Gearmotors
L -inch
POWER
Length “L”
.188
.20
23820-S-x
3.66
23828-S-x
4.66
.50±.02
FLAT
1.856
.3125
.3120 Ø
.293
.390
1.667
Ø
.710
.708
.205Ø (4X)
1.260
THRU FLANGE
2.250
27
CONFIDENTIAL
Part Number
CONFIDENTIAL
28
29
CONFIDENTIAL
Servo Product Section
CONFIDENTIAL
DC Input Servo Drives
BLuDC4 Servo Drive
Output 24-48VDC
Programmable:
Current 4.5 cont 13max Command Options:
Communications:
Inputs:
Outputs:
Error Display:
Dedicated Inputs:
Dedicated Outputs:
Included:
Mating Connectors
Software
Programming Cable
Options:
S, Q or Si Versions
Motor Cables
Si
Q
Step and Direction
Analog
RS232
RS485
7 ( S & Q) 15 ( Si, SE, QE )
3 ( S & Q) 7 ( Si, SE, QE )
2 LED’s
Alarm/Brake/Motion
Approvals:
CE
495.00
Starting at:
Part Number
1-9
BLuDC4-S
$495.00
BLuDC4-Q
$577.50
BLuDC4-Si
$632.50
Note - the PN BLuDC4 replaces the PN BLU100 drive
BLuDC9 Servo Drive
Output 24-48VDC
Current 9 cont 18max
Included:
Mating Connectors
Software
Programming Cable
Options:
S, Q or Si Versions
Motor Cables
Programmable:
Command Options:
Communications:
Inputs:
Outputs:
Error Display:
Dedicated Inputs:
Dedicated Outputs:
Si
Q
Step and Direction
Analog
RS232
RS485
7 ( S & Q) 15 ( Si, SE, QE )
3 ( S & Q) 7 ( Si, SE, QE )
2 LED’s
Alarm/Brake/Motion
Approvals:
CE
Starting at:
588.50
Part Number
1-9
BLuDC9-S
$588.50
BLuDC9-Q
$671.00
BLuDC9-Si
$748.00
Note - the BLuDC9 replaces the BLU200 drive
30
SV Series Drives
SV Series Servo Drive
Current 7.5 Cont 14 peak
Included:
Mating Connectors
Software
Programming Cable
Programmable:
Command Options:
Communications:
Inputs:
Outputs:
Error Display:
Dedicated Inputs:
Dedicated Outputs:
Si
Q
Step and Direction
Analog
RS232
RS485
7 ( S & Q)
3 ( S & Q)
2 LED’s
Alarm/Brake/Motion
Approvals:
CE
Pending
RoHS
Options:
S, Q or Si Versions
Starting at:
Part Number
434.50
1-9
SV7-S-AE
S version - RS-232 - Encoder Feedback
$434.50
SV7-S-RE
S version - RS-485 - Encoder Feedback
$517.00
SV7-S-AR
S version - RS-232 - Resolver Feedback
$434.50
SV7-S-RR
S version - RS-485 - Resolver Feedback
$517.00
SV7-Q-AE
Q version - RS-232 - Encoder Feedback
$544.50
SV7-Q-RE
Q version - RS-485 - Encoder Feedback
$627.00
SV7-Q-AR
Q version - RS-232 - Resolver Feedback
$544.50
SV7-Q-RR
Q version - RS-485 - Resolver Feedback
$627.00
SV7-Si-AE
Si version - RS-232 - Encoder Feedback
$654.50
SV7-Si-RE
Si version - RS-485 - Encoder Feedback
$737.00
SV7-Si-AR
Si version - RS-232 - Resolver Feedback
$654.50
SV7-Si-RR
Si version - RS-485 - Resolver Feedback
$737.00
SV7-C-CE
CanOpen - Can Comms - Encoder Feedback
$522.50
SV7-C-CR
CanOpen - Can Comms - Resolver Feedback
$522.50
SV7-S-AF
S version - RS-232 - Motion Controller Feedback
$467.50
SV7-Si-AE
Series
SV Servo Series
Feedback Option Board
E = Encoder Option Board
R = Resolver Option Board
F = Motion Controller Feedback (MCF)
Output Current
7 = 7A cont ,14A peak
Control
S
Q
Si
C
Communications A = RS-232 (Standard)
R = RS-485
C = CANOpen
31
CONFIDENTIAL
Input 24-80 V
AC Input Servo Drives
CONFIDENTIAL
BLuAC5 Servo Drive
Input 90-240 V
Current 5 Cont 15 peak
Included:
Mating Connectors
Software
Programming Cable
Options:
S, Q or Si Versions
Expanded I/O ( SE and QE)
Motor Cables
Programmable:
Command Options:
Communications:
Inputs:
Outputs:
Error Display:
Dedicated Inputs:
Dedicated Outputs:
Approvals:
CE
Si
Q
Step and Direction
Analog
RS232
RS485
7 ( S & Q) 15 ( Si, SE, QE )
3 ( S & Q) 7 ( Si, SE, QE )
7 Segment Display
Alarm/Brake/Motion
Starting at:
Part Number
880.00
1-9
BLuAC5-S
$880.00
BLuAC5-Q
$1,094.50
BLuAC5-Si
$1,424.50
NOTES
When using BLuAC5 Servo Drives the BLuMTR-FA or BLuMTR-BK-FA cables MUST be used.
32
Drive Version
Software
Standard
Quick Tuner
BLuAC5 - S
Q Programmer
BLuAC5 - Q
BLuAC5 - Si
Si Programmer
Mating Connectors
Include all
With Brake
N0200-101-B-000
N0200-151-B-000
N0400-101-B-000
N0400-151-B-000
N0400-102-C-000
N0400-152-C-000
N0600-102-C-000
N0600-152-C-000
N0750-102-C-000
N0750-152-C-000
80mM
Size 34
Size 23
Servo Motors
Without Brake
60mm
All mating connectors included with drive
cables
Motor Cables
BluMTR- FA -04
BluMTR-BK-FA -04
motor cable, 10 feet
BluMTR- FA -20
Encoder Cables
M0200-101-4-000
M0200-151-4-000
M0400-101-4-000
M0400-151-4-000
M0400-102-5-000
M0400-152-5-000
M0600-102-5-000
M0600-152-5-000
M0750-102-5-000
M0750-152-5-000
BOB1
With Brake
BluMTR- FA -10
With Brake
Accessories
Without Brake
Without Brake
Breakout board for IN/OUT1 connector; comes
BOB2
BluMTR-BK-FA -10
breakout board for IN/OUT2 connector; comes
MMI-01
BluMTR-BK-FA -20
operator interface for Si and SiNet Hub
applications only
Si Net Hub 444
BLu-ENC- CA -04
Si Net Hub 8
BLu-ENC- CA -10
RA-100
BLu-ENC- CA -20
regen resistor assembly
33
CONFIDENTIAL
CONFIDENTIAL
Servo Drive Accessories
Part Number
1-9
RC-050
$165.00
Regeneration Clamp
Break Out Modules for BLuAC and BLuDC D type connectors.
BOB1 For In/Out 1, Includes 3’ cable
$137.50
BOB2 For In/Out 2, Includes 3‘ cable
$137.50
RC 050 Regneration clamp
50w
165.00
BOB1 & BOB2 Break Out Boards
Plugs to 25 way ‘D’ on drive
Din rail mount
Included: 3 ft Connection cables
137.50
34
Servo Motor Cables for A, N and M Series motors
Encoder Cable- For use with BLuAC and BLuDC
BLuENC-CA-04 (3004-182-04)
BLuENC-CA-10
BLuENC-CA-20
1-9
$185.90
$208.00
$239.20
4’
10’
20’
BLuENC-CA-xx / 3004-182-xx
HD15 D Type
AMP connector - 16 way
To BLu Drives
To Servo Motors
Motor Cable for BLuDC Drive
BLuMTR-CA-04 (3004-181-04)
BLuMTR-CA-10
BLuMTR-CA-20
4’
10’
20’
Custom
Length
BLuMTR-CA-XX
1-9
$96.20
$128.70
$172.90
$340.60 plus $2.60 per foot
BLuMTR-CA-xx / 3004-181-xx
A
B
C
G
To Servo Motors
35
CONFIDENTIAL
Cables for BLu Series Drives
Motor with Brake Cable for BLuDC Series Drives
BLuMTR-BK-CA-04 (3004-183-04)
4’
BLuMTR-BK-CA-10
10’
BLuMTR-BK-CA-20
20’
BLuMTR-BK-CA-XX
Custom Length
1-9
$122.20
$167.70
$193.70
BLuMTR-BK-CA-xx 3004-183-xx
GND
CB A
CONFIDENTIAL
To Servo Motors
Motor Cable for BLuAC Drive
1-9
BLuMTR-FA-04 (3004-197-04)
4’
$162.50
BLuMTR-FA-10
10’
$185.90
BLuMTR-FA-20
20’
Custom
Length
$256.10
BLuMTR-FA-XX
BLuMTR-FA-xx / 3004-197-xx
A
B
C
To Servo Motors
Motor with Brake Cable for BLuAC Series Drives
BLuMTR-BK-FA-04 (3004-202-04)
BLuMTR-BK-FA-10
BLuMTR-BK-FA-20
BLuMTR-BK-FA-XX
4’
10’
20’
Custom Length
1-9
$208.00
$236.60
$271.70
BLuMTR-BK-FA-xx / 3004-202-xx
A
B
C
To Servo Motors
36
V Series (ValueLine) Cables
Encoder Extension cables
1-9
for use with V Series to SV/BLu Drives
$50.70
$63.70
$76.70
VA-ENC-CA-xx / 3004-230-xx
'L'
APPLIED MOTION
3004-230-XX REV B
Motor Extension cables
1-9
for use with V Series to SV/BLu Drives
3004-214-03 / VA-MTR-CA-03
3004-214-06 / VA-MTR-CA-06
3004-214-10 / VA-MTR-CA-10
$32.50
$39.00
$52.00
VA-MTR-CA-xx / 3004-214-xx
"L"
MOLEX
To Valueline
Motor
37
CONFIDENTIAL
3004-230-03 /VA-ENC-CA-03
3004-230-06 /VA-ENC-CA-06
3004-230-10 /VA-ENC-CA-10
CONFIDENTIAL
Servo Motors Part Numbering
X0000-000-0-000
Series
N = NEMA flange (IP65)
M = Metric flange (IP65)
A = Metric flange
V = Valueline
Wattage Rating
0030 = 30 watts
0050 = 50 watts
0100 = 100 watts
0200 = 200 watts
0250 = 200 watts
0400 = 400 watts
0600 = 600 watts
0750 = 750 watts
0800 = 800 watts
0950 = 950 watts
1000 = 1000 watt
1500 = 1500 watts
Encoder Type
1 = 2000 Line inc. Encoder
2 = 2048 Line inc. Encoder
3 = ABS Encoder
4 = Resolver
NOTES
“A” series motors not available with holding brake.
38
Custom Features
Voltage
1 = 100
2 = 200
3 = 24
4 = 48
5 = 60
6 = 80
Frame Size
3 = 40 mm
4 = 60 mm
5 = 80 mm
6 = 86mm
7 = 100mm
A = NEMA 17
B = NEMA 23
C = NEMA 34
Shaft Type
0 = Round
1 = One Flat
2 = Two Flats
3 = Keyway
4 = N/A
5 = Brake Option w/ Round Shaft
6 = Brake Option w/ One Flat
7 = Brake Option w/ Two Flats
8 = Brake Option w/ Keyway
Sealing:
Connectors:
Power:
IP65
AMP
30W
50W
2 (.08)
0
Ø22h7–0.021
(.866 +.000)
–.001
2 X #8–32 UNC TAP
21 ref
L±1
(.94)
5.08
(.200)
DIMENSION “L”
PART NUMBER
L mm (inch)
N0030-103-A-000
85.1 (3.35)
N0050-103-A-000
91.1 (3.59)
N0100-103-A-000
105 (4.13)
N0100-101-A-000
105 (4.13)
100W
300 ± 50
Ø56
ref
0
Ø6.35 –0.009
(.250 +.0000)
–.0004
300 ± 50
31 ± 0.1
(1.220)
24 ± 1
2 X 42
(1.65")
65.7 ref
N Series NEMA 17 Servo Motor without Brake
1-9
N0030-101-A-000
N0030-102-A-000
N0030-103-A-000
N0030-104-A-000
30w, 100v, NEMA 17 flange
$671.70
N0050-101-A-000
N0050-102-A-000
N0050-103-A-000
N0050-104-A-000
$674.70
N0100-101-A-000
N0100-102-A-000
N0100-103-A-000
N0100-104-A-000
$700.70
N Series NEMA 17 Servo Motor with Brake
1-9
N0030-151-A-000
N0030-152-A-000
N0030-153-A-000
N0030-154-A-000
$786.50
N0050-151-A-000
N0050-152-A-000
N0050-153-A-000
N0050-154-A-000
$808.60
N0100-151-A-000
N0100-152-A-000
N0100-153-A-000
N0100-154-A-000
$829.40
39
CONFIDENTIAL
NEMA 17 Servo Motors
CONFIDENTIAL
L±1
Ø38.1 – 0.03
(1.50 + .000)
– .002
20.6 ± 1 (.81 ± .04)
26
4 X Ø5.5 ± .25
(.217 ± .01)
+0
Ø12.7 –0.011
(.500 + .0000)
–.0004
Sealing:
Connectors:
Power:
IP65
AMP
30W
6.0
(.24)
50W
1.52
(.060)
2 X 47.14
(1.856")
Power
L mm (inch)
No Brake
Brake
N0100
116 (4.56)
149 (5.87)
N0200
126 (4.96)
161 (6.33)
N0400
149 (5.86)
183 (7.2)
60
(2.36")
(Body)
2 X 56.4
(2.22")
(Flange)
100W
1-9
N0100-101-B-000
N0100-103-B-000
N0100-104-B-000
$791.90
N0200-101-B-000
N0200-102-B-000
N0200-104-B-000
$808.60
N0400-101-B-000
N0400-102-B-000
N0400-105-B-000
$915.20
1-9
N0100-151-B-000
N0100-153-B-000
N0100-154-B-000
N0200-151-B-000
N0200-152-B-000
N0200-154-B-000
$973.70
N0400-151-B-000
N0400-152-B-000
N0400-155-B-000
$1,097.20
40
$954.20
L±1
30 ± 1 (1.18 ± .04)
8.0
(.315)
+0
Ø15.875 – 0.013
(.6250 + .0000)
–.0005
1.6 ± 0.3
(.063)
Sealing:
Connectors:
Power:
IP65
AMP
200W
400W
600W
750W
POWER
Ø73.02 – 0.013
(2.875 + .000)
–.002
4 X Ø5.5 ± .25
(.217 ± .01)
2 X 69.6 ± 0.1
(2.74 ± .004)
2 X 34.8
(1.37)
L mm (inch)
Without Brake
With Brake
N0200
107.0 (4.21)
143.6 (5.65)
N0400
120 (4.72)
155.6 (6.13)
N0600
132 (5.19)
167.6 (6.60)
N0750
140.0 (5.51)
176.6 (6.95)
2 X 86.0
(3.386)
MAX
1-9
N0200-101-C-000
N0200-102-C-000
$869.70
N0400-102-C-000
$1,118.00
N0600-102-C-000
$1,077.70
N0750-102-C-000
$1,118.00
1-9
N0200-151-C-000
N0200-152-C-000
$1,019.20
N0400-152-C-000
$1,305.20
N0600-152-C-000
$1,305.20
N0750-152-C-000
$1,532.70
41
CONFIDENTIAL
CONFIDENTIAL
M Series 40mm Motors
2 X 40
(1.57")
Ø8.00 –0.009
(.315 + .0000)
–.0004
Ø55
ref
25 ± 1
(.98)
0
Ø30h7 –0.021
(1.81 + .000)
–.001
2 X Ø4.5 ON 46 PCD
POWER
M0030
Sealing:
Connectors:
Power:
IP65
AMP
30W
M0050
M0100
50W
L mm (inch)
Without Brake
With Brake
81 (3.18)
115.7 (4.55)
86.1 (3.38)
123 (4.84)
101 (3.97)
5.00
(.197)
136 (5.35)
100W
M Series 40mm Servo Motor without Brake
1-9
M0030-101-3-000
M0030-102-3-000
M0030-103-3-000
M0030-104-3-000
30w, 100v, 40mm flange
$603.20
M0050-101-3-000
M0050-102-3-000
M0050-103-3-000
M0050-104-3-000
$609.70
M0100-101-3-000
M0100-102-3-000
M0100-103-3-000
M0100-104-3-000
$635.70
M Series 40mm Servo Motor with Brake
1-9
M0030-151-3-000
M0030-152-3-000
M0030-153-3-000
M0030-154-3-000
$725.40
M0050-151-3-000
M0050-152-3-000
M0050-153-3-000
M0050-154-3-000
$738.40
M0100-151-3-000
M0100-152-3-000
M0100-153-3-000
M0100-154-3-000
$759.20
42
L±1
2.5 (.098)
L±1
4 X Ø5.5 ± .25
(.217 ± .01)
ON Ø70 B.C.
ØD
Sealing:
Connectors:
Power:
IP65
AMP
200W
2 X 49.50 ± 0.1
REF
6.0
(.24)
400W
600W
Ø50.0 – 0.03
(1.97 + .000)
– .002
305 + 76
(12 +3)
100w = 25 ± 1 (0.984 ± .04)
200W/400W = 30 ± 1 (1.18 ± .04)
3.00
(.118)
750W
L mm (inch)
POWER Without brake With brake
2 X 60
(2.36)
MAX
Shaft D - mm (inch)
M0100
87 (3.42)
110 (4.33)
8 (0.314)
M0200
103 (4.05)
135 (5.31)
14 (0.551)
M0400
126 (4.96)
160 (6.3)
14 (0.551)
1-9
M0100-101-4-000
M0100-103-4-000
M0100-104-4-000
$725.40
M0200-101-4-000
M0200-102-4-000
M0200-104-4-000
$746.20
M0400-101-4-000
M0400-102-4-000
M0400-105-4-000
$830.70
1-9
M0100-151-4-000
M0100-153-4-000
M0100-154-4-000
$869.70
M0200-151-4-000
M0200-152-4-000
M0200-154-4-000
$890.50
M0400-151-4-000
M0400-152-4-000
M0400-155-4-000
$995.80
43
CONFIDENTIAL
L±1
200W/400W = 30 ± 1 (1.18 ± .04)
600W/750W = 35 ± 1 (1.37 ± .04)
8.0
(.315)
+.0
Ø70 –0.03
(2.76 + .000)
–.002
305 + 76
(12 +3)
CONFIDENTIAL
4 X Ø6.5 ± .25
ON Ø90 PCD
ØD
L mm (inch)
Power
Sealing:
Connectors:
Power:
IP65
AMP
200W
3 ± 0.3
(.118)
400W
600W
Without Brake
2 X 31.82 (1.25)
ref
Shaft D- mm (inch)
With Brake
M0200
90 (3.54)
121.6 (4.78)
14 (0.551)
M0400
103 (4.05)
133.6 (5.25)
14 (0.551)
M0600
127 (5.0)
164.0 (6.45)
M0750
135 (5.31)
176.6 (6.95)
19 (0.748)
19 (0.748)
2 x 80.0
(3.15)
MAX
750W
1-9
M0200-101-5-000
M0200-102-5-000
$791.70
M0400-102-5-000
$1,025.70
M0600-102-5-000
$973.70
M0750-102-5-000
$1,118.00
1-9
M0200-151-5-000
M0200-152-5-000
$934.70
M0400-152-5-000
$1,181.70
M0600-152-5-000
$1,181.70
M0750-152-5-000
$1,326.00
44
+0.015
8P9 -0.051
(0.31)
+0
18 -0.2
(0.70)
Ø 133
(5.23)
4 x Ø 9.0 on a
Ø115 +/-0.2 B.C
Ø 100
(3.93)
32
(1.26)
29
(1.41)
Ø 24
(0.94)
Ø 95
(3.74)
DETAIL A
Sealing:
Connectors:
Power:
40+/-1
(1.57)
IP65
AMP
950W
L mm (inch)
Power
Without Brake
With Brake
M1000
158 (6.22)
176 (6.93)
Part Number
79
(3.11)
+0
-0.013
Ø 22
(0.866)
Shaft D- mm (inch)
17
7 (0.67)
(0.27)
18 (0.7)
1-9
M1000-102-7-000
$1,391.00
M1000-152-7-000
45
$1,560.00
L
CONFIDENTIAL
DETAIL A
SCALE 1:1
100 +0
-0.1
(3.93)
CONFIDENTIAL
A Series Servo Motors
Part Number
1-9
A0030-101-3-000
A0030-102-3-000
A0030-103-2-000
A0030-104-2-000
$713.70
A0050-101-3-000
A0050-102-3-000
A0050-103-3-000
A0050-104-3-000
$720.20
A0100-101-3-000
A0100-102-3-000
A0100-103-3-000
A0100-104-3-000
$751.40
A0200-101-4-000
A0200-102-4-000
A0200-104-4-000
$876.20
A0400-101-4-000
A0400-102-4-000
A0400-105-4-000
$999.70
A0600-102-5-000
$1,144.00
A0800-102-5-000
$1,285.70
A0950-102-5-000
$1,285.70
NOTES
“A” series motors not available with holding brake.
Drawings and specifications available on web site
www.applied-motion.com
46
ValueLine Servo Motors
V Series 17 Motors
42
20±1
45±1
35
Ø5h6
Ø22h7
31
35
4.5 Flat
15±.25
4X #4-40 UNC
4.3 MIN DEEP
Connectors:
Power:
“D” & Molex
50W
500±50
Dimensions in mm
V Series 23 Motors
56.4
47.14
Ø6.35h6
20.00
L
35
5.00
1.60
35
Ø38.1
Ø4.50
REF
5.8 FLAT
Connectors:
Power:
15 ±0.25
500±50
“D” & Molex
100W
200W
Drawing shows motor with encoder and connector.
V Series Servo Motor - Motor Only
1-9
V0050-N14-A-000
$182.00
V0100-N14-B-000
$214.50
V0200-N14-B-000
$279.50
V0250-N14-B-000
$364.00
V0400-N14-C-000
$429.00
V Series Servo Motor - Motor with 2048 line Encoder
1-9
V0050-214-A-000
$416.00
V0100-214-B-000
$455.00
V0200-214-B-000
$513.50
V0250-214-B-000
$598.00
47
CONFIDENTIAL
2
CONFIDENTIAL
V Series Servo Motor - Motor with Resolver
1-9
V0050-414-A-000
$409.50
V0100-414-B-000
$455.00
V0200-414-B-000
$500.50
V0250-414-B-000
$585.00
48
*Pricing Notes: For different ratios, modifications or higher volumes please consult factory
for quote.
49
CONFIDENTIAL
Gearhead Product Section
CONFIDENTIAL
Prime Planetary Gearheads
Prime Planetary Gearhead
Sizes:
Ratios:
Backlash:
17
23
42
56
75
34
Single Stage - 3 / 5 / 5.5 / 7 / 10
Dual Stage - 15 / 16 / 20 / 22 / 25 / 28 / 30 / 30 / 40 / 49 / 50 / 55 / 70 / 1000
Single Stage - Standard= 6 min
Low
= 3 min
Dual Stage - Standard= 10 min
Low
= 5 min
Non NEMA
Standard Backlash
Part Number
Gearhead-Motor Mounting
1 -9
Size 17
Size 34
17PL003
17PL005
17PL010
34PL003
34PL005
34PL010
17PL015
17PL020
17PL025
17PL050
17PL070
17PL100
$916.30
$1,190.20
Size 23
23PL003
23PL005
23PL010
$916.30
23PL015
23PL020
23PL025
23PL050
23PL070
23PL100
$1,1547.26
34PL015
34PL020
34PL025
34PL050
34PL070
34PL100
Kit/Shaft Modification
$1,434.40
$1,797.40
42PL015
42PL020
42PL025
42PL050
42PL070
42PL100
Non Nema
Mounting
Kits
17PL
23PL
34PL
42PL
$154.00
$154.00
$231.00
$310.20
Low
Backlash
$264.00
Version
Size 42
42PL003
42PL005
42PL010
1-9
$1,886.50
$2,293.50
50
*Pricing Notes: For different ratios, modifications or higher volumes please consult
factory for quote.
Prime—An adaptor charge is only required if the
gearhead is a different size than the motor or
if the motor is round. Prices only apply when
ordered with gearhead, for adaptor only orders
consult factory.
Primetric Planetary Gearheads
Sizes:
Ratios:
Backlash:
40
60
100
75
Single Stage - 3 / 5 / 5.5 / 7 / 10
Dual Stage - 15 / 16 / 20 / 22 / 25 / 28 / 30 / 30 / 40 / 49 / 50 / 55 / 70 / 100
Low
= 3 min
Low
= 5 min
Non NEMA
Standard Backlash
Part Number 1 -9
40mm
80mm
40PM003
40PM005
40PM010
75PM003
75PM005
75PM010
75PM015
75PM020
75PM025
75PM050
75PM070
75PM100
40PM015
40PM020
40PM025
40PM050
40PM070
40PM100
$1,008.70
$1,309.00
60mm
60PM003
60PM005
60PM010
60PM015
60PM020
60PM025
60PM050
60PM070
60PM100
$1,578.50
Non Nema
Mounting Kits
40PM
60PM
75PM
100PM
$1,977.80
Low backlash
version
$264.00
100mm
$1,008.70
$1,309.00
100PM003
100PM005
100PM010
$2,241.80
100PM015
100PM020
100PM025
100PM050
100PM070
100PM100
$2,615.80
51
1-9
$154.00
$154.00
$231.00
$310.20
*Pricing Notes: For different ratios, modifications or higher volumes please consult factory
for quote.
Primetric—An adaptor charge is only required
if the gearhead is a different size than the
motor or if the motor mounting plate is round.
Prices only apply when ordered with gearhead,
for adaptor only orders consult factory.
CONFIDENTIAL
Primetric Planetary Gearhead
CONFIDENTIAL
Paragon Planetary Gearheads
Paragon Planetary Gearhead
Sizes:
Ratios:
Backlash:
17
23
42
34
Single Stage - 3 / 4 / 5 / 5.5 / 7 / 10
Dual Stage - 15 / 16 / 20 / 22 / 25 / 28 / 30 / 30 / 40 / 49 / 50 / 55 / 70 / 100
Low
= 7 min
Low
= 9 min
Standard Backlash
Non NEMA
Part Number
1-9
17PN003
17PN005.5
17PN010
17PN016
17PN022
17PN028
17PN049
17PN070
17PN100
$724.90
34PN003
34PN005.5
34PN010
$899.80
34PN016
34PN022
34PN028
34PN049
34PN070
34PN100
Size 23
23PN003
23PN005.5
23PN010
23PN016
23PN022
23PN028
23PN049
23PN070
23PN100
Size 34
Size 17
1-9
$1,067.00
$1,248.50
Non Nema
Mounting
Kits
17PN
23PN
34PN
42PN
$154.00
$154.00
$231.00
$310.20
Low
backlash
$264.00
version
Size 42
$724.90
42PN003
42PN005.5
42PN010
$1,630.20
$899.80
42PN016
42PN022
42PN028
42PN049
42PN070
42PN100
$2,024.00
52
Paragon—An adaptor charge is required if the
gearhead is a different size than the motor, if the
motor is round, or if the mounting dimensions are
not Standard NEMA. An adaptor is NOT required
if the only non-NEMA feature is that the motor
has a larger than NEMA diameter shaft. Prices
only apply when ordered with gearhead, for adaptor only orders consult factory.
ValueGear Planetary Gearheads
Sizes:
Ratios:
Backlash:
Part Number
NEMA 17
17VL004
17VL005
17VL007
17VL010
17VL015
17VL020
17VL025
17VL028
17VL040
17VL050
17VL070
17VL100
17
23
34
Single Stage - 4 / 5 / 7 / 10
Dual Stage - 15 / 20 / 25 / 28 / 40 / 50 / 55 / 70 / 100
Dual Stage - Standard= 16
1-9
$625.90
$785.40
Non NEMA
NEMA 34
Gearhead-Motor Mounting Kit/
34VL004
34VL005
34VL007
34VL010
Shaft Modification
34VL015
34VL020
34VL025
34VL028
34VL040
34VL050
34VL070
34VL100
$851.40
$658.90
23VL015
23VL020
23VL025
23VL028
23VL040
23VL050
23VL070
23VL100
$828.30
17VL
23VL
34VL
$154.00
$154.00
$231.00
ValueGear—An adaptor charge is always required
$1,104.40 unless the motor is Standard NEMA in all dimensions including the shaft diameter. Prices only apply when ordered with gearhead, for adaptor only
orders consult factory.
NEMA 23
23VL004
23VL005
23VL007
23VL010
Non Nema
Mounting Kits
1-9
53
CONFIDENTIAL
Valuegear Planetary Gearhead
Super ValueGear Planetary Gearheads
CONFIDENTIAL
Super Valuegear Planetary Gearhead
Sizes:
Ratios:
Backlash:
OP Torque
Nominal:
Part Number
NEMA 23
23
Single Stage - 10
Dual Stage - 25
Single Stage = 15-20 min
Dual Stage = 20-25
Single Stage - = 6 Nm
Dual Stage - = 12Nm
1-9
23SV010
$528.00
23SV025
$601.70
Note - Super valuegear gearhead is only offered as NEMA 23 mount. No other options are available.
54
Warranty Information / Appendix
Warning:
FAILURE OR IMPROPER SELECTION, APPLICATION OR USE OF THE PRODUCTS DESCRIBED HEREIN CAN CAUSE DEATH, PERSONAL INJURY AND
PROPERTY DAMAGE.
This price list and other information from Applied Motion Products, Inc. and
authorized distributors provide product options for further investigation by
users having technical expertise. It is important that you analyze all aspects
of your application and review the information concerning the product in the
current product catalog. Due to the variety of operating conditions and applications for these products, the user, through his or her own analysis and
testing, is solely responsible for making the final selection of the products
and assuring that all performance, safety and warning requirements of the
application are met.
Products described in this document including product features, designs,
specifications, availability and pricing, are subject to change by Applied Motion Products, Inc. at any time without notice.
Warranty:
Applied Motion Products, Inc. warrants to buyer all standard products as
represented in this price list against defects in material or workmanship
for a period of one (1) year from the date of shipment. This warranty does
not cover products that are damaged or worn due to application conditions,
incorrect sizing or any other causes that Applied Motion Products, Inc. determines in its sole discretion to be excessive or improper, or products that
have been modified in any way or manner after shipment.
THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER
WARRANTY, GUARANTEE OR REPRESENTATION OF ANY KIND WHATSOEVER.
ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS, I
MPLIED, OR
ARISING BY OPERATION OF LAW, TRADE USAGE, OR COURSE OF DEALING
ARE HEREBY DISCLAIMED.
NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR PARTIALLY, TO BUYER’S
DESIGNS OR SPECIFICATIONS.
Limitation of Remedy:
SELLER’S LIABILITY ARISING FROM OR IN ANY WAY CONNECTED WITH
THE ITEMS SOLD OR THIS CONTRACT SHALL BE LIMITED EXCLUSIVELY
TO REPAIR OR REPLACEMENT OF THE ITEMS SOLD OR REFUND OF THE
PURCHASE PRICE PAID BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT
SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER, INCLUDING BUT
NOT LIMITED TO LOST PROFITS ARISING FROM OR IN ANY WAY CONNECTED
WITH THIS AGREEMENT OR ITEMS SOLD HEREUNDER, WHETHER ALLEGED
TO ARISE FROM BREACH OF CONTRACT, EXPRESSED OR IMPLIED WARRANTY, OR IN TORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO
WARN OR STRICT LIABILITY.
55
Appendix 1- Custom Product
Due to the nature of manufacturing custom products,
orders for custom motors or drives may need to have
the following wording on the purchase order
i.
Due to the volume of product quoted orders
placed for these volumes must have the following
wording stated on your order. “We understand and
agree that any and all items as stated on this purchase order cannot be canceled or rescheduled. We
agree to accept and pay for all products as ordered
and scheduled for delivery on this document.”
CONFIDENTIAL
Customer Service / Application Support
All of Applied Motion’s products are supported by a nation wide distribution
network working in concert with our regional offices to provide customers
with product expertise, timely delivery and on site service. For immediate
application assistance or customer service please call:
1-800-525-1609
ii
Due to the custom nature of the product,
any order placed for this item must have the following
wording stated on your order. “We understand and
agree that any and all items as stated on this purchase order are for custom product and therefore cannot be rescheduled or canceled. We agree to accept
and pay for all products as ordered and scheduled for
delivery on this document.”
Appendix 2- Air Freight From Factory
If special shipping arrangements are required by the
customer , the following statement will be submitted
for approval.
In an attempt to meet a ship date(s) of____________,
on the above referenced purchase order, international
air freight is required. If you would like to approve air
freight, please sign your approval below and fax back
ASAP. Air freight cost to be as billed by air freight carrier.
Approx.:______________________________________$
CONFIDENTIAL
Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076
800-525-1609
Tel: 831-761-6555
Fax: 831-761 -6544
56
7/31/08

LISTA DE PRECIOS PARA MEXICO REPRESENTACION EN MEXICO

Transcription

Similar documents

customized encoders

Engine Downsizing Potential of Electric Turbochargers

Twist N Set Flange

W-12 view

WhisperShade® IQ® System

VIBCO REPAIR KIT INSTRUCTIONS for BBS

Untitled - MBTA.com

TheAffordableCompactServoSolution

Converting old Quickie P200 Motors for new Electronics