Window Products - DGS Group Plc.

Transcription

Window
Products
Featuring the Elite range of Window
Hardware Exclusive to DGS.
For our full range of products visit
www.dgsgroup.co.uk
Espag | TwinCam | Shootbolt | Friction Stays |
Restrictors & Catches | Ventilation | Tilt & Turn
Gearing | Handles | Duoflex | Highline | Screws
Extensive Range
DGS Group Plc.
Extensive Range
Our extensive range of products
covers all requirements for sealed
unit consumables, window
and door hardware and fitting
materials, making DGS the only
UK One Stop Distributor for the
window and door industry.
Contact your local branch to
request a copy of our window or
door hardware catalogue or visit
www.dgsgroup.co.uk
2
Hardware
Sealed Unit Consumables
Window Products
Spacer Bar
55 Elite Espag Bars
55 Swiss Ultimate
55 Friction Stays
55 Swiss A
55 Ventilation
55 Swiss Georgian
55 Tilt and Turn
55 Chromatech Ultra
55 Handles
55 Chromatech Plus
55 Screws
55 Super Spacer
55 Restrictors and Catches
55 Cut Bar
55 Bendable Bar
Door Products
Desiccant
55 Elite Hardware
55 Locks
55 CE Standard Grade
55 Handles
55 Superior E Grade
55 Hinges
Hotmelt and 2-Part Sealants
55 Door Furniture
55 Screws
55 Fenzi
55 Inline Patio
55 Kommerling
55 Emergency Exit
55 Bostik
55 Low Threshold
Ancilleries
55 Suited Products
55 Coloured Film
Elite Range
55 Cleaning Products
55 TwinCam
55 Tools
55 Espag
55 Tapes
55 Shootbolt
55 Door Locks
Georgian Bar
55 Inline Patio
55 Standard Georgian Bar
55 Cylinders
55 Germanella P Gold
55 Varsavia
Friction Stays
55 Elite Standard Stays
Fitting
55 Elite Security Stays
55 Plastics
55 Elite Egress Stays
55 Silicones
55 Elite Easyclean Stays
55 Rainwater Products
55 Elite Tri-Stays
55 Packers and Gaskets
55 Elite XL Stays
55 Installation Products
55 Elite XXL Stays
55 Mega Egress Stays
.....And much much more
© DGS Group Plc.
Door
Introduction
Furniture
DGS Group Plc.
Service and Value
Since 1977, the name DGS has become synonymous with
service and value. Formed in the very early days of double
glazing technology, our focus on technical expertise and
customer satisfaction has lead to the development of
today’s highly successful multi-million pound business.
There are 11 strategically placed branches, including over
120,000 square feet of manufacturing and warehouse space
at our head office in Derbyshire and across the country.
We have our own fleet of 40 vehicles out daily delivering
throughout the UK and Ireland.
As environmental and security matters have become
increasingly pressing and are enforced by legislation, a
prime focus of DGS is to carefully monitor legislative and
technical trends in the industry. We constantly work with
innovative suppliers throughout the UK, Europe and beyond
enabling us to offer the latest technological solutions. Our
up-to-date knowledge makes it possible for us to offer
products which will enable you to comply with current and
known future specifications.
We are pleased to announce we are GGF members as of
2013.
“One Stop Distributors of
window and door hardware,
sealed unit consumables and
fitting materials.”
© DGS Group Plc.
All content in this catalogue is for reference and guidance
only. We have taken all reasonable due care to ensure the
content within our brochures and website is accurate and
current but we do not accept any liability for any inaccuracy
or omission.
3
Contents
Contents
Page
Elite Espag Bars
Espagnolette..........................................................................................................................................................8 - 10
TwinCam............................................................................................................................................................... 11 - 13
TwinCam Low Handle...................................................................................................................................... 14 - 16
Shootbolt.............................................................................................................................................................. 17 - 19
Friction Stays
Trade Stays........................................................................................................................................................... 22 - 24
Elite Standard Stays.......................................................................................................................................... 26 - 28
Elite Austenitic Stays........................................................................................................................................ 29 - 30
Elite Security Stays............................................................................................................................................ 31 - 33
Elite Egress/Easyclean Stays........................................................................................................................... 34 - 37
Elite Tri-Stays....................................................................................................................................................... 38 - 39
Elite XL Stays.................................................................................................................................................................40
Elite XXL Stays..............................................................................................................................................................41
Mega Egress Stays............................................................................................................................................. 42 - 43
Restrictors and Catches
6” Restrictor...................................................................................................................................................................45
Elite Window Intruder Restrictor...........................................................................................................................46
K Type Window Restrictor........................................................................................................................................47
Cable Window Restrictor.........................................................................................................................................48
Ventilation
S Vent Through Frame Slotvent.................................................................................................................... 51 - 52
L Vent Through Frame Slimline Slotvent............................................................................................................53
GB Vent Through Frame Slotvent.........................................................................................................................54
F Vent Through Frame Slotvent.............................................................................................................................55
5000EA Aluminium Slotvent..................................................................................................................................56
EAR42W Humidity Control Acoustic Vent..........................................................................................................57
Easy Vent Slotvent......................................................................................................................................................58
Tilt and Turn
GU Concealed UNI JET S.................................................................................................................................. 61 - 64
GU Face Fix UNI JET D...................................................................................................................................... 65 - 68
ROTO Concealed NT R...................................................................................................................................... 69 - 71
ROTO Face Fix NT A........................................................................................................................................... 72 - 74
4
© DGS Group Plc.
Elite
Contents
Hardware
Contents
Page
Handles
Suited Espag Handles........................................................................................................................................ 77 - 78
Suited Cockspur Handles................................................................................................................................ 79 - 80
Suited Tilt and Turn Handles.......................................................................................................................... 81 - 82
Hoppe Tilt and Turn Handles..................................................................................................................................83
Window Gearing
Duoflex Openers................................................................................................................................................ 85 - 87
Highline Gearing................................................................................................................................................ 88 - 89
Screws
Rapierstar Features and Benefits.............................................................................................................................91
StarPVCu™ Furniture to PVCu Screws............................................................................................................ 92 - 93
StarTurn™ Wood Screws.................................................................................................................................... 94 - 95
StarFix™ Masonry Screws and Accessories................................................................................................... 96 - 97
© DGS Group Plc.
5
Elite Casement
Range
Elite Espagnolette
Elite TwinCam
Elite TwinCam Low Handle
Elite Shootbolt
This brochure shows the Window Range.
To see our complete range of products
please see our new website or request a
door products catalogue.
6
Elite Hardware
Introduction to our Elite
Window Hardware Range
D
GS Group Plc.
launch the new and exclusive quality
range of Elite Window hardware. All of our
Elite brand hardware is designed, developed
and manufactured in the EU. DGS technical
department and our European partners
are constantly working to provide the best
solution for the fabricator.
This brochure shows the Elite Window
range. To see the complete range of
products please see our new website.
55 10 year manufacturer warranty as standard
on our complete range.
55 The range has been designed to meet
requirements of PAS 24/SBD and offers a
variety of solutions for most fabrication
requirements.
55 Excellent Corrosion Resistance (Exceeding
480 Hours Salt Spray Exposure).
55 Universal routing across the Elite casement
(window) product range.
For more information check our website:
www.dgsgroup.co.uk
Scan the barcode to the right with your
smartphone to get direct access to our
mobile friendly website.
© DGS Group Plc.
7
Elite Hardware
Elite
Espagnolette
Elite Open Out hardware
Designed to provide simple, yet complete
solutions for casement windows. It meets
the most stringent security and weather
performance requirements of BS EN standards,
making the windows equipped with Elite Open
Out components both burglar-resistant and
economical in terms of energy efficiency.
Info Clips
Fits onto all Elite casement
(window) products displaying
a custom logo of your
choosing adding a finishing
touch to your Elite casement
(window) products.
Routing details and additional parts
8
© DGS Group Plc.
Elite Hardware
Elite
Espagnolette
Universal
Elite Open Out fittings are suitable for use
with most PVC, timber or aluminium
windows with Eurogroove
(9.3mm + 0.7/-0.2mm).
Security Cams
Adjustable mushroom cams are an integral
part of Elite Open Out Hardware. They
provide extra security and allow for easy
adjustment of compression to achieve
perfect weather seal.
Universal Routing
For ease of fabrication there is one
UNIVERSAL ROUTING detail across all Elite
casement products.
Surface Protection
Elite hardware delivers the very best
corrosion resistance in the market,
exceeding Grade 5 of BS EN1670, which is
minimum 480 hours exposure to salt spray.
Manufacture
All Elite products are
manufactured to
the normal High-Tec,
High Quality
standards expected
from DGS.
Elite Espag Dimensions
Espag
A (mm)
B (mm) C (mm) D (mm)
240mm
400mm
600mm
800mm
1000mm
1200mm
240
380
580
780
980
1180
89
144
244
344
111
111
© DGS Group Plc.
71
126
226
326
444
544
N/A
N/A
N/A
N/A
426
526
9
Elite Hardware
Elite
Espagnolette
Elite Espag Details
Codes
Gearbox 20mm,
8mm Cam
EE-208150
EE-208240
EE-208400
EE-208600
EE-208800
EE-2081000
EE-2081200
Gearbox 22mm,
8mm Cam
EE-228150
EE-228240
EE-228400
EE-228600
EE-228800
EE-2281000
EE-2281200
Gearbox 20mm,
9.5mm Cam
EE-209150
EE-209240
EE-209400
EE-209600
EE-209800
EE-2091000
EE-2091200
Gearbox 22mm,
9.5mm Cam
EE-229150
EE-229240
EE-229400
EE-229600
EE-229800
EE-2291000
EE-2291200
Faceplate
150
240
400
600
800
1000
1200
Applic.range Cam Keep Pack
Qty
150-240
1
1
10
241-400
2
2
10
401-600
2
2
10
601-800
2
2
10
801-1000
2
2
10
1001-1200 3
3
10
1201-1800 3
3
10
Recommended Keeps
Profile
Code
Profile
Code
DECEUNINCK 2500/2800
DECEUNINCK ZENDOW
DURAFLEX
EUROCELL 70
EUROCELL EUROLOGIK
EUROCELL UNILOGIK 62
KOMMERLING C70/O70
LINIAR
PROFILE 22
REHAU 706 (Hand inserted)
REHAU TRITEC
EK-103
EK-119
EK-107
EK-104
EK-119
EK-109
EK-116
EK-109 or EK-101
EK-102 or EK-109
EK-115
EK-119
REHAU 706 (CO-EX)
SELECTA ADVANCE 70
SPECTUS ELITE 70/63
SYNSEAL SHIELD
SYNSEAL SYNERGY
SYNSEAL LEGEND 70
TIMBER
VEKA FSS
WHS ECLIPSE/ESTHETIQUE
WHS SYSTEM 10/RUSTIQUE
WHS TOP SWING
EK-111
EK-111
EK-106
EK-113
EK-117
EK-108
EK-110
EK-114
EK-105
EK-120
EK-118
Recommended CE Marked Fixings for Elite Window
Espagnolette
Description
Code
Box Qty
For use in unreinforced profile
For use in reinforced profile
CFG4.3 x Length
CSR3.9 x Length
1000
1000
Choose from Zinc or Stainless Steel Finish for more details see page 92.
10
© DGS Group Plc.
Elite Hardware
Elite
TwinCam
E
lite Open Out Hardware
Info Clips
Fits onto all Elite casement
(window) products displaying
a custom logo of your
choosing adding a finishing
touch to your Elite casement
(window) products.
© DGS Group Plc.
11
Elite Hardware
Elite
TwinCam
Universal
Elite Open Out fittings are suitable for use with
most PVC, timber or aluminium windows with
Eurogroove (9.3mm + 0.7/-0.2mm).
Security Cams
Adjustable mushroom cams are an integral
part of Elite Open Out Hardware. They provide
extra security and allow for easy adjustment of
compression to achieve perfect weather seal.
Easy Assembly
EliteTwinCam hardware is comparably quicker
and easier to fit. Due to its single face-fixing it
reduces the fabrication time and makes installation
adjustments easier.
Universal Routing
For ease of fabrication there is one
UNIVERSAL ROUTING detail across
all Elite casement products.
High Security Level
Elite TwinCam hardware meets
BS7950 and Secured by Design
requirements.
SILBEAR surface protection
Elite hardware delivers the very best corrosion
resistance in the market, exceeding Grade 5 of BS
EN1670, which is minimum 480 hours exposure to
salt spray.
Manufacture
All Elite products are manufactured
to the normal High-Tec, High Quality
standards expected from DGS.
12
Elite TwinCam Dimensions
Size
L (mm)
A (mm) B (mm) C (mm) D (mm)
300
400
600
800
900
1000
1100
1200
300
400
550
750
850
950
1050
1150
110
143
213
143
143
143
143
143
without
without
without
313
363
413
463
513
110
143
213
143
143
143
143
143
without
without
without
313
363
413
463
513
© DGS Group Plc.
Elite Hardware
Elite
TwinCam
Elite TwinCam 20mm
Codes
8mm Cam
ETC-208300
ETC-208400
ETC-208600
ETC-208800
ETC-208900
ETC-2081000
ETC-2081100
ETC-2081200
9.5mm Cam
ETC-209300
ETC-209400
ETC-209600
ETC-209800
ETC-209900
ETC-2091000
ETC-2091100
ETC-2091200
10.5mm Cam
ETC-201300
ETC-201400
ETC-201600
ETC-201800
ETC-201900
ETC-2011000
ETC-2011100
ETC-2011200
Faceplate
300
400
600
800
900
1000
1100
1200
Applic.range
301-400
401-550
551-750
751-850
851-950
951-1050
1051-1150
1151-1600
Cam
4
4
4
8
8
8
8
8
Keep
2
2
2
4
4
4
4
4
Pack Qty
10
10
10
10
10
10
10
10
10.5mm Cam
ETC-221300
ETC-221400
ETC-221600
ETC-221800
ETC-221900
ETC-2211000
ETC-2211100
ETC-2211200
Faceplate
300
400
600
800
900
1000
1100
1200
Applic.range
301-400
401-550
551-750
751-850
851-950
951-1050
1051-1150
1151-1600
Cam
4
4
4
8
8
8
8
8
Keep
2
2
2
4
4
4
4
4
Pack Qty
10
10
10
10
10
10
10
10
Elite TwinCam 22mm
Codes
8mm Cam
ETC-228300
ETC-228400
ETC-228600
ETC-228800
ETC-228900
ETC-2281000
ETC-2281100
ETC-2281200
9.5mm Cam
ETC-229300
ETC-229400
ETC-229600
ETC-229800
ETC-229900
ETC-2291000
ETC-2291100
ETC-2291200
For profile related keeps see page 10
TwinCam
Description
Code
Box Qty
CFG4.3 x Length
CSR3.9 x Length
1000
1000
© DGS Group Plc.
13
Elite Hardware
Elite TwinCam
Low Handle
Elite Low Handle Open Out Hardware
- Has all the benefits of our standard TwinCam but
has been designed as a complete solution for where a
low sightline is required. (Suitable for Lifetime Homes
Standards).
Universal
Elite Open Out fittings are suitable for use with most PVC, timber or
aluminium windows with Eurogroove (9.3mm + 0.7/0.2mm).
Security Cams
Adjustable mushroom cams are an integral part of Elite
Open Out Hardware. They provide extra security and
allow for easy adjustment of compression to achieve
perfect weather seal.
Easy Assembly
EliteTwinCam hardware is comparably quicker and easier to fit. Due to its
single face-fixing it reduces the fabrication time and makes installation
adjustments easier.
Universal Routing
For ease of fabrication there is one UNIVERSAL ROUTING detail across all
Elite casement products.
High Security Level
Elite TwinCam hardware meets BS7950 and Secured by Design
requirements.
SILBEAR surface protection
Elite hardware delivers the very best corrosion resistance in the market,
exceeding Grade 5 of BS EN1670, which is minimum 480 hours exposure to
salt spray.
Manufacture
All Elite products are manufactured to the normal High-Tec, High Quality
standards expected from DGS.
Info Clips
Fits onto all Elite casement (window) products displaying
a custom logo of your choosing adding a finishing touch
to your Elite casement (window) products.
14
© DGS Group Plc.
Elite Hardware
Elite TwinCam
Low Handle
Elite TwinCam Details Measurements 20mm
Codes
8mm Cam
9.5mm Cam
Applic.range
Cam
Keep
ETCL-208850
ETCL-208950
ETCL-2081050
ETCL-2081150
ETCL-209850
ETCL-209950
ETCL-2091050
ETCL-2091150
851-950
951-1050
1051-1150
1151-1600
6
6
6
6
3
3
3
3
Pack
Qty
10
10
10
10
Elite TwinCam Details Measurements 22mm
Codes
8mm Cam
9.5mm Cam
Applic.range
Cam
Keep
ETCL-228850
ETCL-228950
ETCL-2281050
ETCL-2281150
ETCL-229850
ETCL-229950
ETCL-2291050
ETCL-2291150
851-950
951-1050
1051-1150
1151-1600
6
6
6
6
3
3
3
3
Pack
Qty
10
10
10
10
For profile related keeps see page 10
TwinCam Low Handle
Description
Code
Box Qty
CFG4.3 x Length
CSR3.9 x Length
1000
1000
© DGS Group Plc.
15
Elite Hardware
Elite TwinCam
Low Handle
16
© DGS Group Plc.
Elite Hardware
Elite
Shootbolt
E
lite Shootbolt Hardware
Flexible Solution
Elite Open Out Hardware system offers increased flexibility to
fabricators who are able to combine smaller number of individual
components to fit a variety of sash dimensions.
Universal Routing
For ease of fabrication there is one UNIVERSAL ROUTING detail across all Elite casement products.
Security Cams
Adjustable mushroom cams are an integral part of Elite Open Out
Hardware. They provide extra security and allow for easy adjustment of
compression to achieve perfect weather seal.
Easy Assembly
Elite Shootbolt components
can be assembled quickly and easily.
High Security Level
Elite High Security Shootbolt version has been designed to meet
BS7950 and Secured by Design requirements.
Surface Protection
Elite hardware delivers the very
best corrosion resistance in the
market, exceeding Grade 5 of
BS EN1670, which is minimum
480 hours exposure to salt spray.
Manufacture
All Elite products are manufactured
to our normal High-Tec, High
Quality standards.
© DGS Group Plc.
17
Elite Hardware
Elite
Shootbolt
18
© DGS Group Plc.
Elite Hardware
Elite
Shootbolt
Gearbox Details
Gearbox Backset 20mm
ESB-200
Gearbox Backset 22mm
ESB-220
Pack Qty
10
Order Details
8mm Cam 9.5mm Cam Applic.
Range
ESB-1600 ESB-1600
370 - 550
ESB-83601 ESB-93601
551 - 950
ESB-85601 ESB-95601
951 - 1350
ESB-85602 ESB-95602
951 - 1350
ESB-87602 ESB-97602
1351 - 1750
No. of
cams
0
1
1
2
2
Cam
Keeps
0
2
2
4
4
End Keeps
Pack Qty
1LH and 1RH
1LH and 1RH
1LH and 1RH
1LH and 1RH
1LH and 1RH
10
10
10
10
10
*** Profile Related
Gearbox Details
20 & 22mm backset
Recommended CE Marked Fixings for Elite
Window Shootbolt
Description
Code
Box Qty
For use in unreinforced
profile
For use in reinforced
profile
CFG4.3 x Length
1000
CSR3.9 x Length
1000
Choose from Zinc or Stainless Steel
Finish for more details see page 92.
© DGS Group Plc.
19
Friction Stays
Trade Stays
Elite Standard Stays
Elite Security Stays
Elite Egress Stays
Elite Easyclean Stays
Elite Tristays
Elite XL Stays
Elite XXL Stays
Mega Egress Stays
20
20
Friction Stays
Friction Stays
UK Manufactured
Q
uality Assurance
- DGS quality and reliability is recognised everywhere;
DGS friction stays are designed and manufactured under the
ISO 9001:2000 quality standard and are Secured by Design
registered. In house testing is routinely carried out on all
ranges up to 20,000 cycles (equivalent to 100 years use) and
performance is further endorsed by the BSI.
DGS is a supplier of friction stays to and is specified by many
local authorities. All DGS friction hinges are made to be fitted
with the minimum of effort and slotted fixing holes allow for
maximum adjustment. Window security, fire or emergency exit,
safety restriction, easy cleaning and anti-corrosion: all come
within the scope of DGS friction stays
The Elite range of friction stays comprises:
55 Elite Standard.
55 Elite Security.
55 Elite TriStay.
55 Elite Easyclean.
55 Elite Egress.
55 Elite XL and XXL.
55 Restrictors and Catches.
Manufactured in the UK
Explore the range of friction stays
- Choose from our three ranges of DGS friction stays
manufactured in the UK.
**Mega Egress not manufactured by DGS**
Trade Stays
Elite Stays
Over the last thirty years, DGS
Hardware has produced in excess
of 50 million pairs of friction stays.
DGS Friction Stays are noted
for their innovative design and
reliablity.
Mega Egress
DGS Group Plc received a coveted
Secured by Design (SBD) Award for
our range of Elite Friction Stays.
(DGS Standard Track Width is 18mm)
© DGS Group Plc.
21
Friction Stays
Trade
Stays
T
rade Friction Stay
- Over 18 million pairs in trouble free use. The original
non-handed friction stay.
Features:
55 Non Handed - no misfitting.
55 No need to separate.
55 Available with inbuilt safety restrictor.
55 Manufactured in ferritic stainless steel.
55 10 year guarantee (details upon request).
55 Friction adjustment without metal to metal contact.
55 Available in Std 13mm Stack Height.
Need more weight capacity?
Elite High Capacity Range for heavy
sash weight applications.
See page 41-42
Specifications for standard 13mm stack height
friction stay (top hung) in ferritic stainless steel.
Size (Top Max Vent
Min Vent
Max Vent
Max Vent
Hung)
Weight (kg) Height (mm) Height (mm) Width (mm)
8"
12
200
350
1200
Opening Order
Angle
Code
60°
F/S08TH
Box Qty
(Pairs)
25
10"
16
275
400
1200
85°
F/S10TH
25
12"
16"
21
22
350
500
550
750
1200
1200
85°
85°
F/S12TH
F/S16TH
25
25
20"
24"
24
26
700
850
1000
1200
1200
1200
55°
38°
F/S20TH
F/S24TH
25
25
Size (Side
Hung)
12"
16"
Max Vent
Weight (kg)
22
24
Min Vent
Width (mm)
300
400
Max Vent
Width (mm)
650
750
Opening
Angle
61°
85°
Order
Code
F/S12SH
F/S16SH85
Box Qty
(Pairs)
25
25
Please note: vent height/width is measured from rebate to rebate
22
© DGS Group Plc.
Friction Stays
Trade
Stays Dimensions
Size
08TH
A
35
B
21
C
102
D
30
E
132.5
F
37
10TH
35
30.6
121
30
178
42.5
12TH
35
54
121
30
211.5
60
16TH
35
101.5
121
30
281.5
92
20TH
35
148.5
121
30
227.5
248
24TH
35
195.5
121
30
175.5
402
12SH
30.6
82.9
127.75
30
185.5
86
16SH
35
101.5
140
30
281.5
92
Recommended CE Marked Fixings for Trade Stays
Description
Code
Box Qty
For use in unreinforced sash profile
SFG4.3 X Length 1000
For use in PVC reinforced frame profile
SSR3.9 X Length 1000
Choose from Zinc or Stainless Steel Finish, for more details see page 92
© DGS Group Plc.
23
Friction Stays
Trade Stay With
Integrated Restrictor
Trade Friction Stay - Integrated Restrictor
Opening windows carry the risk that a person might
fall out of them. A safety restrictor makes this much
more unlikely by initially restricting the opening to a
fixed position. Opening beyond this initial position
is achieved by operating the safety restrictor release
mechanism. It is strongly recommended that safety
restrictors are used in pairs.
Order codes and quantities for Trade Stay with
Integrated Restrictor (Top Hung)
Size (Top
Hung)
16"
13mm IR
I/RS16TH
Box Qty
(Each)
50
Restricted
Opening Angle
13o
20"
I/RS20TH
50
11o
24"
I/RS24TH
50
8o
Order codes and quantities for Trade Stay with
Integrated Restrictor (Side Hung)
Size (Side
Hung)
12"
13mm IR
I/RS12SH
Box Qty
(Each)
50
Restricted
Opening Angle
14°
16"
I/RS16SH
50
13°
Recommended CE Marked Fixings for IR Trade Stays
Description
Code
Box Qty
24
© DGS Group Plc.
Friction Stays
Elite Friction Stays
Manufactured in the UK
Secured by Design
- Our Elite range of Friction Stays are now CE Approved
and Secured by Design.
DGS Group Plc. received a coveted Secured by Design (SBD) Award for our range of Elite
Friction Stays in January 2013. Secured by Design is the initiative from the Association of Chief
Police Officers (ACPO) that aims to reduce crime through effective environmental design. The
scheme also calls for the installation of security products that meet police-approved standards.
Manufacturers and installers whose products have been certified by an accredited testing body
to the specified standards, can apply for SBD membership and licence to utilise the scheme’s
logo. Further information on the scheme can be obtained by visiting www.securedbydesign.com
The SBD logo is the only symbol that guarantees national Police approval of a product, providing
architects, planners, specifiers, builders and end customers with reassurance that it provides a
realistic level of resistance to criminal attack. It is widely recognised within the building industry
and is increasingly being listed as a mandatory requirement
in tenders. Utilising SBD accredited products helps meet
new planning requirements for developers to demonstrate
what they are doing to reduce crime. Planners recognise
the effectiveness of Secured by Design and creating a
development that is SBD compliant and/or utilises SBDaccredited building and security products is a quick and
simple way to ensure compliance with new guidelines.
Consumers and specifiers are also recognising that SBD
provides an easy route to help identify which of the many
technical standards indicates a product is an effective crime
prevention measure.
Gaining SBD approval for our range of Elite Friction Stays in conjunction with our window
intruder restrictor is a significant achievement, demonstrating our commitment to safety and
sustainability and providing our valued customers with reassurance that our product matches
performance claims. Securing SBD accreditation provides our range of Elite Friction Stays with a
unique competitive advantage and reiterates its status as a first-class product.
Many of our friction stays are available in the following variants:
55 Standard 13mm stack height.
55 15mm stack height.
55 17mm stack height.
55 Ferritic or austenitic steel.
55 Various combinations.
55 Plus integrated restrictor available on 12" side hung and above.
55 DGS Friction Stays are tested to BS 6375 Part 2.
© DGS Group Plc.
25
Friction Stays
Elite Standard
Stays
Standard Elite Friction Stay
- Awarded Secured by Design Accreditation and
Tested as part of a window system to CE Standard
Features:
55 Tested as part of a window system to CE Standard.
55 Handed.
55 Enhanced security.
55 Improved weather tightness.
55 A degree of self adjustment.
55 Also available in austenitic stainless steel giving
load bearing and improved resistance to adverse
atmospheric conditions.
55 BSI approved.
55 CE approved.
55 Tested to 20,000 cycles.
Specifications for standard 13mm, 15mm,
17mm stack height.
Size (Top Hung) Max Vent
Weight (kg)
8"
12
Min Vent
Height (mm)
200
Max Vent
Height (mm)
350
Max Vent
Width (mm)
1200
Opening
Angle
60o
10"
16
275
400
1200
85o
12"
21
350
550
1200
85o
16"
22
500
750
1200
85o
20"
24
700
1000
1200
55o
24"
26
850
1200
1200
38o
Size (Side Hung) Max Vent
Weight (kg)
12"
22
Min Vent
Width (mm)
300
Max Vent
Width (mm)
650
Opening
Angle (mm)
61o
16"
400
750
85o
Side Hung Elite Stays
26
24
© DGS Group Plc.
Friction Stays
Elite Standard
Stays
Order codes and quantities for the Elite Top Hung Stay
Size (Top Hung) 13mm Stack
8"
E/S08TH
15mm Stack
E/S08TH15
17mm Stack
E/S08TH17
Box Qty (Pairs)
25
10"
E/S10TH
E/S10TH15
E/S10TH17
25
12"
E/S12TH
E/S12TH15
E/S12TH17
25
16"
E/S16TH
E/S16TH15
E/S16TH17
25
20"
E/S20TH
E/S20TH15
E/S20TH17
25
24"
E/S24TH
E/S24TH15
E/S24TH17
25
Order codes and quantities for the Elite Side Hung Stay
Size (Side Hung) 13mm Stack
12"
E/S12SH
15mm Stack
E/S12SH15
17mm Stack
E/S12SH17
Box Qty (Pairs)
25
16"
E/S16SH15
E/S16SH17
25
E/S16SH
Dimensions
Size
08
A
36
B
21
C
102
D
29.9
E
132.5
F
37
10
36
30.5
121
29.9
178
42.5
12
36
54
121
29.9
211.5
60
16
36
101.5 140
29.9
281.5
92
20
36
148.5 121
29.9
227.5
248
24
36
195.5 121
29.9
175.5
402
127.75 29.9
185.5
86
281.5
92
12SH 31.6 82.9
16SH 35
© DGS Group Plc.
101.5 140
29.9
27
Friction Stays
Elite Standard Stays with
Order codes and quantities for the Elite Stay with
Size (Top 13mm
Hung)
Stack
16"
EIR/S16TH
17mm Stack Box Qty
(Pairs)
EIR/S16TH17 25
20"
EIR/S20TH
EIR/S20TH17
25
24"
EIR/S24TH
EIR/S24TH17
25
Order codes and quantities for the Side Hung Elite
Stay with Integrated Restrictor
Size (Side 13mm
Hung)
Stack
12"
EIR/S12SH
EIR/S12SH17
Box Qty
(Pairs)
25
16"
EIR/S16SH17
25
EIR/S16SH
17mm Stack
Specifications for Top Hung Restrictor Stays
Size (Top
Hung)
16"
20”
24"
Max Vent
Weight (kg)
22
24
26
Min Vent
Height (mm)
500
700
850
Max Vent
Height (mm)
750
1000
1200
Max Vent
Width (mm)
1200
1200
1200
Opening
Angle
85o
55o
38o
Restricted
Opening Angle
13o
11o
8o
Side Hung Restrictor Stays
Size (Top
Hung)
12”
Max Vent
Weight (kg)
22
Min Vent
Max Vent
Opening
Height (mm) Width (mm) Angle
300
650
61o
Restricted
Opening Angle
14o
16”
24
400
13o
750
85o
Recommended CE Marked Fixings for Elite Standard Stays
Description
Code
Box Qty
28
© DGS Group Plc.
Friction Stays
Elite Austenitic
Stays (Standard and IR)
Standard Austenitic Elite Friction Stay
- Awarded Secured by Design Accreditation
and Tested as part of a window system to CE
Standard.
Features:
55 480 Hours Salt Spray Endurance on our
Austenitic Stays Type 304. Tested to EN ISO
9227:2012.
55 Tested as part of a window system to CE
Standard.
55 Handed.
55 Enhanced security.
55 Improved weather tightness.
55 A degree of self adjustment.
55 Manufactured in austenitic stainless steel.
55 BSI approved.
55 CE approved.
Specifications for standard 13mm and
17mm stack height.
Size (Top
Hung)
8"
Max Vent
Weight (kg)
12
Min Vent
Max Vent
Max Vent
Height (mm) Height (mm) Width (mm)
200
350
1200
Opening
Angle
60o
Restricted
Angle
-
10"
16
275
400
1200
85o
-
12"
21
350
550
1200
85o
-
16"
22
500
750
1200
85o
13o
20"
24
700
1000
1200
55o
11o
24"
26
850
1200
1200
38o
8o
Weight (kg)
12"
22
Min Vent
Width (mm)
300
Max Vent
Width (mm)
650
Opening
Angle
61o
Restricted
Angle
14o
16"
400
750
85o
13o
© DGS Group Plc.
24
29
Friction Stays
Elite Austenitic
Stays (Standard and IR)
Order codes and quantities for the Austenitic Elite Stay
8"
AE/S08TH
17mm Stack
AE/S08TH17
Box Qty (Pairs)
25
10"
AE/S10TH
AE/S10TH17
25
12"
AE/S12TH
AE/S12TH17
25
16"
AE/S16TH
AE/S16TH17
25
20"
AE/S20TH
AE/S20TH17
25
24"
AE/S24TH
AE/S24TH17
25
Order codes and quantities for the Austenitic Side Hung Elite Stay
12"
AE/S12SH
17mm Stack
AE/S12SH17
Box Qty (Pairs)
25
16"
AE/S16SH17
25
AE/S16SH
Order codes and quantities for the Austenitic Elite Stay with Integrated Restrictor
16"
AEIR/S16TH
17mm Stack
AEIR/S16TH17
Box Qty (Pairs)
25
20"
AEIR/S20TH
AEIR/S20TH17
25
24"
AEIR/S24TH
AEIR/S24TH17
25
Order codes and quantities for the Austenitic Side Hung
Elite Stay with Integrated Restrictor
12"
AEIR/S12SH
17mm Stack
AEIR/S12SH17
Box Qty (Pairs)
25
16"
AEIR/S16SH17
25
AEIR/S16SH
Recommended CE Marked Fixings for Elite Austenitic Stays
Description
Code
Box Qty
30
© DGS Group Plc.
Friction Stays
Elite Security
Stays
Elite Security Friction Stay
- Awarded Secured by Design Accreditation and
Tested as part of a window system to CE Standard.
Features:
55 A Higher Security Friction Stay with Improved
Weather Sealing. Specify this stay where security to
BSI 7950 is required.
55 Handed.
55 Higher security.
55 Strengthened Sash Bar.
55 Elongated end cap with screw fixing hole and
stainless steel pin running through the end cap.
55 Improved weather sealing.
55 BSI approved.
55 Available in Std 13mm and 17mm stack height.
Please note: vent height/width is measured from
rebate to rebate
Specifications for standard 13mm and 17mm
stack height.
Weight (kg)
8"
12
Min Vent
Height (mm)
200
Max Vent
Height (mm)
350
Max Vent
Width (mm)
1200
Opening
Angle
60o
10"
16
275
400
1200
85o
12"
21
350
550
1200
85o
16"
22
500
750
1200
85o
20"
24
700
1000
1200
55o
24"
26
850
1200
1200
38o
Min Vent
Width (mm)
300
400
Max Vent
Width (mm)
650
750
Opening
Angle
61o
85o
Weight (kg)
12"
22
16"
24
© DGS Group Plc.
31
Friction Stays
Elite Security
Stays
Order codes and quantities for the Elite Security Stay
8"
S/S08TH
17mm Stack
S/S08TH17
Box Qty (Pairs)
25
10"
S/S10TH
S/S10TH17
25
12"
S/S12TH
S/S12TH17
25
16"
S/S16TH
S/S16TH17
25
20"
S/S20TH
S/S20TH17
25
24"
S/S24TH
S/S24TH17
25
Order codes and quantities for the Side Hung
12"
S/S12SH
17mm Stack
S/S12SH17
Box Qty (Pairs)
25
16"
S/S16SH17
25
S/S16SH
Recommended CE Marked Fixings for Elite Security Stays
Description
Code
Box Qty
32
© DGS Group Plc.
Friction Stays
Elite Security
Stays
Top Hung
Size
08TH
A
40.5
B
24.5
C
94
D
15
E
31.7
F
G
132.5 37
10TH
40.5
24.5
119.1
15
31.7
178
12TH
40.5
24.5
142.5
15
31.7
211.5 60
16TH
40.5
24.5
189
15
31.7
281.5 92
20TH
40.5
24.5
214
15
31.7
211.5 60
24TH
40.5
24.5
214
15
31.7
281.5 92
42.5
Side Hung
Size
12SH
A
40.5
B
24.5
C
122.5
D
129.5
E
15
F
31.7
G
227.5
H
248
16SH
40.5
24.5
169.5
129.5
15
31.7
175.5
402
© DGS Group Plc.
33
Friction Stays
Elite Egress Stays
(Standard and IR)
Elite Egress Friction Stay
- Awarded Secured by Design Accreditation and Tested
as part of a window system to CE Standard. For fire escape
and emergency exit, with or without restrictor.
Features:
55 Available in 12” and 16” side hung options.
55 Gives maximum exit clearance.
55 Optional Easyclean Mode .
55 Available with inbuilt safety restrictor to comply with
BS6375 Part 2 1987, BS 8213 Part 1 1991.
55 16” version complies with BS8213 Part 1991 for fire
escape windows.
55 Stack heights available 13mm and 17mm.
Egress windows provide emergency exits in case of fire. To
be designated a fire escape window, these windows must
comply with Building Regulations Approved Document B
for fire escape windows and British Standard BS 9991:2011.
Order codes and quantities for the Standard Elite Escape Egress Hinge
12"
F/SE12SH
17mm Stack
F/SE12SH17
Box Qty (Pairs)
25
16"
F/SE16SH17
25
F/SE16SH
Order codes and quantities for the Elite Escape Egress Hinge
with Integrated Restrictor
12"
I/RSE12SH
17mm Stack
I/RSE12SH17
Box Qty (Pairs)
25
16"
I/RSE16SH17
25
I/RSE16SH
34
© DGS Group Plc.
Friction Stays
Elite Egress
Stays Dimensions
Size
12”
A
33.75
B
45
C
170
D
32.8
E
81.55
F
190.45
16”
33.25
105.5 134
32.8
106
268
Specifications for Standard and IR Stays 13mm and 17mm stack height
Weight (kg)
12"
22
Min Vent
Width (mm)
300
Max Vent
Width (mm)
650
Opening
Angle
85o
Restricted
Angle
15o
16"
400
700
88o
14o
24
Recommended CE Marked Fixings for Elite Egress Stays
Description
Code
Box Qty
© DGS Group Plc.
35
Friction Stays
Elite Egress With
Easyclean Stays
Elite Easyclean Friction Stay
- Awarded Secured by Design Accreditation
and Tested as part of a window system to
CE Standard. The Elite Easyclean overcomes
one of the main difficulties with egress stays.
It allows the cleaning of a window from an
internal position.
Features:
55 Available in 12” and 16” side hung options.
55 Gives maximum exit clearance.
55 Easyclean mode.
55 Manufactured in ferritic stainless steel (type
430).
55 Available in austenitic stainless steel (type
304) for improved resistance to adverse
atmospheric conditions.
Order codes and quantities for Elite Easyclean Stays
12"
E/CDGS12SH
17mm Stack
E/CDGS12SH17
Box Qty (Pairs)
25
16"
E/CDGS16SH17
25
E/CDGS16SH
Order codes and quantities for Austenitic Elite Easyclean Stays
12"
AE/CDGS12SH
17mm Stack
AE/CDGS12SH17
Box Qty (Pairs)
25
16"
AE/CDGS16SH17
25
AE/CDGS16SH
stack height.
Size (Side
Hung)
12"
Max Vent
Min Vent
Max Vent
Weight (kg) Height (mm) Height (mm)
22
300
650
Opening
Angle
85o
16"
24
88o
36
400
750
© DGS Group Plc.
Friction Stays
Elite Egress With Easyclean
Stays Dimensions
Size
12”
A
33.75
B
45
C
170
D
32.8
E
16
F
256
16”
33.25
105.5 134
32.8
16
358
Description
Code
Box Qty
Use in unreinforced sash profile
Use in PVC reinforced frame profile SSR3.9 X Length 1000
© DGS Group Plc.
37
Friction Stays
Elite
Tri-Stays
Fire Escape, EasyClean and
Safety Restrictor all in one.
Elite Tri-Stay Friction Stay
- Awarded Secured by Design Accreditation and Tested
as part of a window system to CE Standard. For Fire Escape,
Easyclean and Safety Restrictor all in one.
Features:
55 Higher Security Friction Stay with Improved Weather
Sealing. Specify this stay where security to BSI 7950 is
required.
55 Handed.
55 13mm and 17mm stack heights available.
55 Fire Escape as Standard.
55 Easyclean function as Standard.
55 Ferritic Stainless Steel.
55 Austenitic Stainless Steel Available.
55 Full egress to BS 5588.
55 Safety restriction as standard.
55 Super smooth EasyClean operation.
55 Basic Egress stay without a restrictor function risk the
possibility of people opening a window and falling out
or even climbing up to an already open window.
Please note: vent height/width is measured from rebate to
rebate.
Order codes for the Elite TriStay
12"
T/S12SH
17mm Stack
T/S12SH17
Box Qty (Pairs)
25
16"
T/S16SH17
25
T/S16SH
Order codes for the Austenitic Elite TriStay
12"
AT/S12SH
17mm Stack
AT/S12SH17
Box Qty (Pairs)
25
16"
AT/S16SH17
25
38
AT/S16SH
© DGS Group Plc.
Friction Stays
Elite
Tri-Stays
Fire Escape, EasyClean and
Safety Restrictor all in one.
Size
12”
A
33.25
B
45
C
170
D
32.8
E
16
F
256
16”
33.25
105.5 238
32.8
16
358
stack height.
Weight (kg)
12"
22
Min Vent
Height (mm)
300
Max Vent
Height (mm)
650
Opening
Angle
85o
Restricted
Angle
15o
16"
400
750
88o
12o
24
Description
Code
Box Qty
Use in unreinforced sash profile
Use in PVC reinforced frame profile SSR3.9 X Length 1000
© DGS Group Plc.
39
Friction Stays
Elite XL 35kg
Load Bearing Stays
Elite XL Friction Stay - 35Kg Load Bearing Stay
- Awarded Secured by Design Accreditation and Tested as
part of a window system to CE Standard. The DGS Elite High
Capacity Range is a specialist range for heavy sash weight
applications. It is available in 13mm and 17mm stack heights.
Features:
55 The Elite XL stay features innovative heavy duty components
enabling it to support extra heavy vent weights.
55 Available for 13 or 17mm Stack Height Elite XL Stay.
55 Thicker control arm.
55 Extra vent weight capacity.
55 Enhanced performance to BS 6375-2:2009.
55 Enhanced resistance in testing for jamming.
55 Tested as part of a window system to CE standards.
Codes for 13mm and 17mm stack Elite XL stay
Type
Top Hung
Size
24"
Stack Height
13mm
Code
Pairs/box
E/S24TH13XL 25
Top Hung
24"
17mm
E/S24TH17XL 25
Size
24"
A
36
B
195.5
C
121
D
29.9
E
175.5
F
402
Specifications
Weight (kg)
24"
35
40
Max Vent
Width (mm)
1200
Opening
Angle
38o
© DGS Group Plc.
Friction Stays
Elite XXL 50Kg
Load Bearing Stays
Elite XXL Friction Stay 50Kg Load Bearing Stays
- Awarded Secured by Design Accreditation and Tested as
part of a window system to CE Standard. The Elite XXL stay has
the same features as the Elite XL stay but is further uprated by
incorporating a substantially ‘beefed-up’ third bar. This enables
the stay to support even heavier loads. Ideal for Triple Glazing.
Features:
55 Thicker and wider control arm than standard.
55 Available for 13 or 17mm Stack Height Elite XL Stay.
55 Extra vent weight capacity.
55 Increased diameter load bearing pivots.
55 Increased sliding shoe friction capability.
55 Additional vent arm and track fixing points.
55 Enhanced performance to BS 6375 Part 2 Test 5 - Release of
jammed hinge.
55 Fits into Eurogroove while still carrying 50kg!
Codes for 13mm and 17mm stack Elite XL stay
Type
Top Hung
Size
24"
Stack Height
13mm
Code
E/S24TH13XXL
Pairs/box
20
Top Hung
24"
17mm
E/S24TH17XXL
20
Size A
24" 36
B
C D
E F G
H
I
J
K
38.25 71 86.25 38 83 29.9 175.5 154 181 67
Specifications
Weight (kg)
24"
50
© DGS Group Plc.
Max Vent
Width (mm)
1500
Opening
Angle
38o
41
Friction Stays
Mega Egress 40kg Egress
& EasiClean Stays
Mega Egress Stay Easyclean.
40kg Load Bearing, Egress and
Features:
55 345mm suits all side hung applications up to 900mm sash
widths.
55 Reduced possibility for finger entrapment.
55 In open position the sash is moved outside the frame to
maximise the escape aperture.
55 True 90 degree opening for egress compliance.
55 Achieves 450mm wide opening for egress on smaller
windows than traditional egress hinges.
55 Can be moved into easy clean position, with automatic
reset to egress operation on closing (330mm version only).
55 High security and excellent compression achieved by
unique patented hinge geometry.
55 No hinge protection needed to achieve high security.
55 Superior carrying weight - maximum 40kg load.
Sizes and Loads
55 Ideal when triple glazing is used.
55 Guarantee - 10 years for mechanical.
Type
Size
Recommendations
Immobilizer to be fitted to easy clean feature on sash widths
above 600mm.
Testing and Accreditation
55 Tested to BS EN 1670 and has exceeded grade 5
classification for ultimate corrosion resistance.
55 Tested to over 25,000 cycles under 40kg operational load.
55 Tested to PAS 24 (BS7950) security test as part of a window
system.
Product Material Specification
55 Stainless steel parts are - 430.
55 Plastic parts - glass reinforced Nylon 66.
Length of
hinge
Maximum
sash weight
Maximum
frame width
Maximum
frame height
Full opening
Available
stack height
345mm - easy
clean operation
40kg
900mm
(immobiliser
of easy clean
recommended on
wide sashes)
1200mm
90 degrees
13.5mm and
16.5mm
Specifications
Type
Side Hung
Size
12" 345mm
13.5mm Stack
F/SME12SH13.5
16.5mm Stack
F/SME12SH16.5
Pairs/box
25
42
© DGS Group Plc.
Friction Stays
Mega Egress 30kg Load
Bearing Stays
Mega Egress Stay (small) -
30kg Load Bearing
Features:
55 220mm suits all side hung applications up to 600mm sash
widths.
55 Reduced possibility for finger entrapment.
55 In open position the sash is moved outside the frame to
maximise the escape aperture.
55 True 90 degree opening for egress compliance.
55 Achieves 450mm wide opening for egress on smaller
windows than traditional egress hinges.
55 High security and excellent compression achieved by
unique patented hinge geometry.
55 No hinge protection needed to achieve high security.
55 Superior carrying weight - maximum 30kg load.
55 Ideal when triple glazing is used.
Technical Specification
Sizes and Loads
Type
Length of
hinge
Maximum
sash weight
55 Tested to BS EN 1670 and has exceeded grade 5
Maximum
classification for ultimate corrosion resistance.
55 Tested to over 25,000 cycles under 40kg operational load. frame width
55 Tested to PAS 24 (BS7950) security test as part of a window Maximum
frame height
system.
Full opening
For casement window systems, the Mega Egress Friction
Hinge is suitable for all side hung applications.
Product Material Specification
55 Stainless steel parts are - 430.
55 Plastic parts - glass reinforced Nylon 66.
Available
stack height
Size
220mm - fixed/
non easy clean
30kg
600mm
1200mm
90 degrees
13.5mm and
16.5mm
Specifications
Type
Side Hung
© DGS Group Plc.
Size
220mm
13.5mm Stack
F/SME220SH13.5
16.5mm Stack
F/SME220H16.5
Pairs/box
25
43
Restrictors
and Catches
DGS 6” Restrictor
Elite Window Intruder Restrictor
K Type Restrictor
Cable Restrictor
44
Restrictors
6” DGS Window
Restrictor
D
GS 6” Restrictor Stay
This device enables the user to restrict a window opening up to 100mm.
55 Manufactured exclusively by DGS in UK.
55 Fits standard Eurogroove.
55 Adjustable friction control.
55 Solid stainless steel construction.
55 No disengagement.
55 Suitable for PVCu, aluminium and timber profiles.
55 Non handed.
55 Factory fit or retro-fit.
Code
R/S6
Description
DGS Stainless Steel Restrictor 6"
Pack Qty
50
Recommended CE Marked Fixings for DGS 6” Window Restrictor
Description
Code
Box Qty
CFG4.3 x 30
1000
CSR3.9 x 30
1000
© DGS Group Plc.
45
Restrictors
Elite Window
Intruder Restrictor
E
lite Window Intruder Restrictor
When using DGS Friction Stays you can consider using the Elite DGS window intruder
restrictor. These are used in pairs, one piece on the frame and one on the sash. When the window
is closed, the two identical components interlock and restrict the opportunity to jemmy the
window open. Use of this product will enhance security and may help you
to achieve compliance with BSI 7950.
55 Manufactured exclusively by DGS in UK.
55 Strong pressed stainless steel construction.
55 3 fixing holes for added security.
Item
Elite DGS Window Intruder
Restrictor single piece
13mm Stack
WIR/13
17mm Stack
WIR/17
Singles/Box
200
Recommended CE Marked Fixings for Elite Window Intruder Restrictor
Description
Code
Box Qty
CFG4.3 x 30
1000
CSR3.9 x 30
1000
46
© DGS Group Plc.
Restrictors
K Type Window
Intruder Restrictor
D
GS ‘K’ Type Window Intruder Restrictor
The standard DGS WIR Window Intruder Restrictor is unsuitable for use with DGS Egress
Friction Stays due to the geometry of these stays. If using DGS egress stays, you can consider
using the DGS ‘K’ type intruder restrictor. Again, these are used in pairs, one piece on the frame
and one on the sash. When the window is closed, the two identical components interlock and
restrict the opportunity to jemmy the window open. Use of this product will enhance security
and may help you to achieve compliance with BSI 7950.
55 Strong cast construction.
55 2 fixing holes.
Item
DGS 'K' Type Intruder Restrictor single piece
13mm Stack
KSHS/14
17mm Stack
KSHS/17
Singles/Box
600
Recommended CE Marked Fixings for K Type Window Intruder Restrictor
Description
Code
Box Qty
CFG4.3 x 30
1000
CSR3.9 x 30
1000
© DGS Group Plc.
47
Restrictors
Cable Window
Restrictor
C
able Window Restrictor
The Royal Association for the Prevention of Accidents
report that each year 4000 children under the age of 15
fall out of a window. We have recently launched a simple,
affordable and very effective solution to this in the form of
the window restrictor. Available soon is a Chrome and Gold
with transparent cover for hotels and modern facades.
55 MRSA protective coating is suitable for council contracts
and the NHS sector, also for window fabricators to retro-fit.
55 Fitted to any window in minutes.
55 20cm long cable.
55 Withstands forces of up to 100kg.
55 Restricts opening to approx. 100mm.
55 Meets standards EN 16281:2013 exceeding strength
requirements and withstanding a minimum force of
1350Nm. This is far greater than restrictors currently on the
market which have been tested to withstand only 350Nm.
55 Passed a cord cutting test of 3600N.
55 Window can be opened fully in an emergency.
Item
Window Restrictor White
Code
WRU/WH
Box Qty
10
Window Restrictor Black
WRU/BK
10
Window Restrictor Chrome
WRU/CH
10
Window Restrictor Gold
WRU/GD
10
48
© DGS Group Plc.
Restrictors
Products
Including The Exclusive Elite Range of
Hardware.
The range of products stocked covers all
requirements for sealed unit consumables,
window and door hardware and fitting
materials, making DGS the only UK One Stop
Distributor for the window and door industry.
We are proud to be members of the GGF and are
a recognised SBD supplier and continually test
for the latest standards in terms of corrosion,
performance and security.
DGS Group Plc.
The Complete One Stop Distributor
© DGS Group Plc.
49
Ventilation
S Vent
L Vent
GB Vent
F Vent
5000EA Vent
Acoustic Vent
Easy Vent
50
Ventilation
S Vent - Through
Frame Slotvent
G
reenwood S Vent
Suitable for all window types and provides trickle
ventilation in line with current Building Regulations.
Overview
55 Up to 4200mm2 Equivalent Area.
55 Selection of control options.
55 Upward and downward air deflection options.
55 Widely specified within the social sector.
55 Suitable for installation with sleeves that help improve
window integrity.
55 Greenwood’s S Vent is suitable for all window types, provides
trickle ventilation in line with current Building Regulations
and is available in a range of model sizes.
Supplied as a complete package, the internal mechanism has a number of control options
including, front, bottom and pull cord operations, ensuring maximum flexibility for the end
user. The external canopy is supplied with an integral flyscreen and provides excellent weather
protection.
Aesthetically pleasing and manufactured from rigid PVCu, the S Vent is simply screw fixed to the
window frame and is supplied with push fit screw covers to conceal fixing points. The S Vent is
available in a range of colours and can be supplied with differing internal and external colours.
The vent can also be used in conjunction with Greenwood’s PVCu Permavent glazed-in Bar
Carriers.
3000S
4000S
6000S
© DGS Group Plc.
51
Ventilation
S Vent - Through
Frame Slotvent
Front Operation
Front Operation
A front mounted shutter option is available on all S Vent
models and that providing easy controllable ventilation.
Bottom Operation
A central bottom mounted shutter is available on 3000 and
4000 models only and reduces the possibility of damage to the
vent during transit. The internal shutters can also be removed
to provide permanent trickle ventilation.
Bottom Operation
Pull Cord Operation
The front mounted shutter is supplied with a pull cord fed
through the ventilator allowing greater ease of operation.
(Available on request).
Pull Cord Operation
Additional Special Colour Options
Coloured Slotvents, available to order in boxes of 50 vents:
Light Ivory - RAL 1015, Cream - RAL 9001, Anthracite Grey - RAL
7016, Slate Grey - RAL 7015, Silver Grey - RAL 7001, Black Brown
- RAL 8022, Black - RAL 9005. (Available on request).
Order Codes
Bottom
Operation
S/V30522WH
S/V30522BN
S/V30522TA
S/V40022WH
S/V40022BN
S/V40022TA
Not available
Not available
Not available
52
Front
Operation
S/VF30522WH
S/VF30522BN
S/VF30522TA
S/VF40022WH
S/VF40022BN
S/VF40022TA
S/VF55022WH
S/VF55022BN
S/VF55022TA
Description
Size
Colour
'S' Type Model 3000S
‘S' Type Model 6000S
305mm x 22mm x 23mm
305mm x 22mm x 23mm
305mm x 22mm x 23mm
400mm x 22mm x 23mm
400mm x 22mm x 23mm
400mm x 22mm x 23mm
550mm x 22mm x 23mm
550mm x 22mm x 23mm
550mm x 22mm x 23mm
White
Brown
Tan
White
Brown
Tan
White
Brown
Tan
Pack
Qty
50
50
50
50
50
50
50
50
50
© DGS Group Plc.
Ventilation
L Vent - Slimline Through
Frame Slotvent
G
reenwood L Vent - Slimline Through Frame Slotvent
Suitable for all window types and provides trickle
ventilation in line with current Building Regulations.
Overview
55 Through frame trickle ventilator.
55 Suitable for use with narrow frame sections.
55 Manufactured from PVCu.
55 Provides up to 3200mm2 equivalent area.
55 Attractive low profile unobtrusive design.
Greenwood L Vent provides an unobtrusive ventilation
solution in line with current Building Regulations and has been designed for use on low profile
window frames with limited slot heights.
The internal mechanism is controlled via a bottom-mounted lever and the external canopy is
supplied with an integral flyscreen. The hooded exterior cover prevents weather ingress. The L
Vent is manufactured from rigid PVCu and is available in 2000 and 4000 models providing 1600
and 3200 equivalent area respectively and a choice of colours. The 2000L also offers a noise
reduction of 37dB when in the open position thereby providing a high level of sound reduction.
Supplied as a complete unit, the L Vent can be simply screw fixed to the window and end caps
are provided to snap into place to conceal fixing points.
2000L
4000L
Order Codes
Code
S/V26315BN
S/V26315TA
S/V26315WH
S/V48515BN
S/V48515TA
S/V48515WH
© DGS Group Plc.
Description
Slot Vent 'L' Type Model 2000L
Size
263mm x 15mm x 18mm
263mm x 15mm x 18mm
263mm x 15mm x 18mm
485mm x 15mm x 18mm
485mm x 15mm x 18mm
485mm x 15mm x 18mm
Colour
Brown
Tan
White
Brown
Tan
White
Pack Qty
50
50
50
50
50
50
53
Ventilation
GB Vent - Through
Frame Slotvent
G
reenwood GB Vent - Through Frame Slotvent
Permanent Ventilation through frame slotvent.
Overview
55 Through frame trickle ventilator.
55 Designed for use in combustion environments.
55 Provides permanent ventilation.
55 Manufactured from PVCu.
55 Conforms to BS 5440 Part 2: 2000.
The GB Vent has been designed to meet the Building
Regulations requirements for the permanent supply of
combustion air and complies to BS 5440 Part 2: 2000.
Available in a 5000mm2 model, the inner vent is inverted to deflect the supply of air upwards and
the external unit is hooded to prevent weather ingress. The GB Vent can be used as a throughframe, glazed-in or over-frame ventilator. Supplied as a complete package and manufactured
from PVCu, the vent is designed for screw fixing and is available in white.
5000GB
Product Performance
A non-adjustable ventilator designed to allow the passage of air at all times. The ventilator must
be fitted with apertures that prevent the entry of a 10mm diameter ball, but allow the entry
of a 5mm diameter ball. No gauze or screen should be incorporated or fitted. Greenwood’s GB
ventilator has been tested and conforms to BS 5440 Part 2: 2000 and requirements laid down in
current Building Regulations.
Order Codes
Code
S/V400GBWH
54
Description
Through Frame Slotvent (White)
Size
400mm x 22mm x 29mm
Pack Qty
50
© DGS Group Plc.
Ventilation
F Vent - Through
Frame Slotvent
G
reenwood F Vent - Through Frame Slotvent - Screw
Fit or Clip Fit - Aesthetic through frame slotvent.
Overview
55 Slimline, unobtrusive finish on profile when installed.
55 Up to 2634mm² Equivalent Area.
55 Clip fit and screw fix installation options.
55 10 or 12mm rout options.
55 Clip fit option reduces installation time on-site and in
production.
55 Traditional screw fix installation option also available on
same model.
55 Available in a range of colours to suit a variety of window
profiles including uPVC, timber and wood effect finishes.
55 Equivalent area performance visibly marked for Building Control inspection.
The F Vent is available with a clip-fit installation option which offers
valuable installation savings in production and on site. The clip has
been designed to fit securely to a range of profile depths and is
provided already installed in the ventilator body.
1250FB
2500FB
Order Codes
Screw Fit
S/V23816WH
S/V23816BN
S/V38316WH
S/V38316BN
© DGS Group Plc.
Clip Fit
S/V23816CWH
S/V23816CBN
S/V38316CWH
S/V38316CBN
Description
Slot Vent 'F' Type Model 1250F 238mm
Colour
White
Brown
White
Brown
Pack Qty
50
50
50
50
55
Ventilation
5000EA - Aluminium
Vent
G
reenwood 5000EA Vent - Smallest 5000mm²
equivalent area slotvent
Overview
55 Smallest 5000mm2 equivalent area vent on the market - just
410mm long.
55 Easy to apply 13mm rout for installation on window profile.
55 Suitable for use where a high level of equivalent area is
required and to achieve the minimum room requirements
under Building Regulations (min 5000mm2 ea per room).
55 Excellent air tightness performance, increasingly important
with dwelling air pressure tests.
55 Aesthetically pleasing design - unobtrusive when installed.
55 Easy to open and control by the homeowner - upward air deflection to reduce risk of
draughts.
55 Suitable for use on all types of window frames.
55 Manufactured from aluminium alloy.
5000EA
Fitting Diagram
Fitting
Ensure that the canopy and vent are
correctly positioned to ensure that the
slotvent is not obstructed in any way that
could impede air flow.
Order Codes
Code
Description
S/VF5000EABN 5000mm² equivalent area vent (Brown)
S/VF5000EAWH 5000mm² equivalent area vent (White)
56
Pack Qty
100
100
© DGS Group Plc.
Ventilation
EAR42W - Humidity
Control Acoustic Vent
G
reenwood EAR42W Vent - Humidity control
acoustic vent
Overview
One of the best performing acoustic window ventilators
available in the UK. Provides an outstanding Dn,e,w; 42dB(A)
for areas with high external noise transmission, those likely
in PPG24 categories B, C and D. Humidity control to regulate
supply of fresh air effectively throughout the day in response to
changing indoor humidity levels.
55 Humidity control to regulate incoming air in response to
changing humidity levels.
55 Provides up to 3912mm² equivalent area.
55 Upward air deflection to eliminate draughts.
55 May require add-on section in some installations.
Acoustic Performance
Dn,e,w: = 42dB(A)
Dn,e,w: (C) = 42dB
Dn,e,w: (Ctr) = 42dB
Dn,e,w: Average weighted preformance
across frequency range
C: Pink noise = 41dB
Ctr: Road noise: = 39dB
Closed Position: = 45dB (A)
External
Acoustic Spacer
Internal
Order Code
Code
EAR42W
© DGS Group Plc.
Description
Humidity Control Acoustic Vent (White)
Qty
1
57
Ventilation
Easy Vent - Window
Slotvent
C
ompetitively priced window slot vent.
A NEW competitively priced window slot vent
available from all DGS branches throughout the
UK and Ireland.
Overview
55 Available in 3000mm and 4000mm variants.
55 From 1800mm² to 2500mm² equivalent area.
55 Made from UV stable ASA.
55 Snap on screw cover caps.
55 Multi Position Vent.
55 Available in colours: White, Brown, Tan as standard. Other colours on request.
55 Tested to BSEN 1026:2000 & BSEND1027:2000.
55 300mm Boxed in 55s and 400mm boxed in 70s.
Order Codes
Code
S/VE3000/BK
S/VE3000/LO
S/VE3000/MY
S/VE3000/WH
S/VE3000BK/WH
S/VE3000LO/WH
S/VE4000BK
S/VE4000LO
S/VE4000MY
S/VE4000WH
S/VE4000BK/WH
S/VE4000LO/WH
S/VE4000MY/WH
58
Description
Easy Vent 3000mm Black
Easy Vent 3000mm Tan
Easy Vent 3000mm Brown
Easy Vent 3000mm White
Easy Vent 3000mm Black Out/White In
Easy Vent 3000mm Tan Out/White In
Easy Vent 4000mm Black
Easy Vent 4000mm Tan
Easy Vent 4000mm Brown
Easy Vent 4000mm White
Easy Vent 4000mm Black Out/White In
Easy Vent 4000mm Tan Out/White In
Easy Vent 4000mm Brown Out/White In
Pack Qty
55
55
55
55
55
55
70
70
70
70
70
70
70
© DGS Group Plc.
Restrictors
UK Manufacturing
Friction stay production, Melbourne
Derbyshire.
For Over 30 years DGS has been
manufacturing high quality reliable friction
stays. To date we have produced over
50 million and all DGS friction stays are
designed and manufactured under the
ISO 9001:2000 quality standard. In house
testing is routinely carried out on all ranges
up to 20,000 cycles (equivalent to 100 years
use) and performance is further endorsed
by BSI and Secured by Design registered.
DGS Group Plc.
© DGS Group Plc.
59
Tilt and Turn
GU Concealed
GU Face Fix
ROTO NT A Face Fix
ROTO NT R Concealed
60
Tilt and Turn
GU Uni-Jet S
Concealed
U
NI-JET-CONCEALED - The fully concealed Tilt & Turn system.
The UNI-JET-S-CONCEALED hardware system is designed for enhanced requirements
in PVC and timber windows and balcony
doors. Individual window design options
are possible with UNI-JET S-CONCEALED.
The UNI-JET S-CONCEALED hardware
was successfully subjected to a durability
test with 15,000 cycles in accordance
with EN 13126-8 and with this, fulfils the
requirements specified in the European
Standard.
Design and Functionality
55 Plenty of scope for design creativity thanks to floor-to-ceiling sash rebate heights of up to
2800mm currently in fashion.
55 Your field of vision is not distracted by hinges but rather by the window’s handle and design.
55 Thanks to the interior rebate gasket, the formation of condensation in the window’s rebate is
successfully prevented and it’s sound proof characteristics are enhanced.
55 A technically and aesthetically perfected hardware system with well-proven quality and
performance characteristics from Gretsch-Unitas.
55 The window profile colours can be selected completely independant of the hardware
component’s surface finish.
Design Advantages
55 Universally applicable as the hardware can be used as standard for all window series.
55 The hardware components are not damaged or soiled on the building site as these are
protected in the rebate. Cumbersome and time consuming taping work is no longer
necessary.
55 Suitable for sash weights up to 130kg without any additional machining.
55 A wide opening angle of up to 100° provides an unrestricted view.
55 Certified burglar inhibition up to Burglary Resistance Grade 2 (‘WK2’) in accordance with ENV
1627-1630.
© DGS Group Plc.
61
Tilt and Turn
GU Uni-Jet S
Concealed
F
erGUard* silver surface coating.
This appealing bright silvery surface has proven itself
for years now and has become a standard for window
hardware FerGUard* silver is applied in three
optimally coordinated layers in modern computer-controlled surface treatment
facilities. This state of the art surface treatment sealing ensures long term high-grade
corrosion protection which has been convincingly proven by striking results
achieved in standardised salt spray procedures.
Technical Advantages
55 All hardware adjustments can be carried out with a single system tool.
55 Reduced stock levels and increased cost effectiveness as there is no need to colour-match the
window hinge-side components with the window.
55 UNI-JET hardware is subject to the QM 328 Quality Management programme (‘tested product
quality’) by the ift Rosenheim
55 Reassuring 10 year functional guarantee.
55 No drilling or milling work necessary on the window.
55 The “Cleverle” locking cam ensures that your window functions correctly
by automatically compensating for clearance tolerances.
55 The robust design is reflected in the material thickness and
workmanship.
55 Elegant hardware adaptations by means of profile-specific packers.
55 No jig required.
Product Overview
Clearance Hardware
(mm)
Axis (mm)
12
9/13
62
Sash Overlap
(mm)
max.22
Maximum sash Sash rebate
weight (kg)
width (mm)
130
280 - 1400
Sash rebate
height (mm)
280 - 2800
© DGS Group Plc.
Tilt and Turn
GU Uni-Jet S
Concealed
Application Diagram for UNI-JET Tilt&Turn hardware, sash weight up to 130kg
Infill weights
Dimensioned Sketch
Hardware Versions
UNI-JET D
UNI-JET S-CONCEALED
Examples
Infill weight = 70kg/m²
With a sash rebate width SRW
of 850mm, the maximum sash
rebate height SRH is 2050mm
With a sash rebate height SRH
of 1200mm, the maximum sash
rebate width SRW is 1180mm
Remarks
Only sash formats appearing on
the left of the weight graph are
permissible
Non permissible formats are in
the grey zone
© DGS Group Plc.
63
Tilt and Turn
GU Uni-Jet S
Concealed
Item Part Code
Part Description
Sash Rebate Qty Per
Width/Height Window
1
6-32021-00-0-1
Corner Transmission
500-1400
1
1
6-32238-00-0-1
Corner Transmission
400-500
1
2
6-34088-06-0-1
Stay Arm Connecting Plate
420-500
1
2
6-34088-06-0-1
501-750
1
2
6-34088-08-0-1
751-950
1
2
6-34088-10-0-1
951-1200
1
2
6-34088-12-0-1
1201-1300
1
2
6-34088-10-0-1
1301-1400
1
2
G-45995-00-0-1
Additional Extension
250
1
3
G-22080-00-0-1
Drive Gear 15mm Backset
480-590
1
3
G-22081-00-0-1
591-750
1
3
G-22082-00-0-1
751-1200
1
3
G-22084-00-0-1
1201-1700
1
3
G-22085-00-0-1
1451-1950
1
3
G-22086-00-0-1
1951-2450
1
4
6-32012-00-0-1
Middle Lock DK-Bottom
280-750
1
5
6-32076-05-0-1
751-950
1
5
6-32076-07-0-1
951-1200
1
5
6-32076-10-0-1
1201-1600
1
6
6-32010-00-0-1
Middle Lock Hinge Side
480-720
1
6
6-32008-05-0-1
721-1100
1
6
6-32008-07-0-1
1101-1350
1
6
6-32008-12-0-1
1351-1700
1
6
6-32008-15-0-1
1701-2100
1
6
6-32008-19-0-1
2101-2450
1
7
6-32668-00-0-1
Locking Plate SE KD TBT
All
1
8
Acc to profile
Packer to Suit
All
1
9
Acc to Profile
Locking Plates
All
Dependant on
locking points
10
6-29987-00-0-1
Sash Positioner
551-2090
1
11
Acc to profile
Wedge Plate
551-2090
1
12
6-35049-30-L/R-1
Stay Arm 13mm Groove
280-750
1
12
6-35049-45-L/R-1
751-1200
1
12
6-35049-60-L/R-1
1200-1400
1
13
9-44437-**-L-1
Hinge Packer Left Hand
All
1
14
9-44437-**-R-1
Hinge Packer Right Hand
All
1
15
6-34095-00-R/L-1
Corner Bearing
All
1
16
6-34096-13-L/R-1
Sash Bearing 13mm Groove
All
1
17
6-32303-00-0-1
Extension Piece
All
1
18
G-45995-00-0-1
Additional Stay Arm **
1300-1400
1
64
Required on
every window
Optional
According to
Specification
** Required on
windows over
1300mm wide
© DGS Group Plc.
Tilt and Turn
GU Uni-Jet D
Face Fix
U
NI-JET-D (Face Fix) Tilt & Turn System.
The high quality UNI-JET D Tilt & Turn system is designed for
PVC windows with drill-in or rebate corner hinges. With UNI-JET D,
we provide a high-quality and very practical system that has been
perfected by means of the central locking system concept. In this case
the hinge-side is also supplemented with the standard UNI-JET product
range; resulting in optimised stock keeping and reduced costs.
Design and Functionality
55 The hinge-side’s slimline aesthetics harmonises with the slimline
profile design and with it enables a maximum glass surface.
55 The simple elegance of the UNI-JET D hinge-side emphasises the
window’s aesthetics.
55 Stylish cover caps can be colour-matched to suit the window’s
profile colour. Window handles are available in a choice of colours to
complete the colour harmony.
55 The hardware system enables easy and convenient window
operation.
55 The face-fix UNI-JET D hinge side flush with the sash overlap. The window retains it’s line
management and high-quality appearance.
55 The integrated hardware enables easy and time saving window cleaning.
55 Jig required.
Additional Hinge Side Advantages
55 The 3D adjustment in the pivot rest and stay bearing compensates for installation tolerances
and warrants long term operation and tightness.
55 The stay arm hinge is equipped with an integrated sash brake that compensates for
installation and glazing tolerances. As a result, the sash does not close over on it’s own - even
in draughty conditions.
55 An optional adjustable sash brake is also available.
55 The symmetrical drilling and screw-fixing pattern for both the stay bearing and pivot rest
is designed in such a way as to ensure that the screw connection always reaches into the
profile’s steel reinforcement.
55 Rugged rebate corner hinges made of steel support even sashes with the heaviest of special
glazing.
© DGS Group Plc.
65
Tilt and Turn
GU Uni-Jet D
Face Fix
F
erGUard* silver surface coating.
This appealing bright silvery
surface has proven itself for
years now and has become a standard for window hardware FerGUard*
silver is applied in three optimally coordinated layers in modern
computer-controlled surface treatment facilities. This state of the art surface treatment sealing
ensures long term high-grade corrosion protection which has been convincingly proven by
striking results achieved in standardised salt spray procedures.
The Basics; the central locking system
55 Optimised stock keeping: the hinge-side hardware versions are based
on the UNI-JET central locking system equipped with the self-adjusting
locking cam “Cleverle”.
55 The self adjusting mushroom cam “Cleverle” provides enhanced security
and automatically adjusts clearance tolerances.
55 Certified burglary resistance security right up to Burglary Resistance
Grade 2(‘WK2’) is determined by means of selecting the appropriate
strikers for the central locking system.
Product Overview
Clearance Hardware
(mm)
Axis (mm)
12
9/13
66
Sash Overlap
(mm)
18/20/22
Maximum sash Sash rebate
weight (kg)
width (mm)
130
280 - 1600
Sash rebate
height (mm)
280 - 2800
© DGS Group Plc.
Tilt and Turn
GU Uni-Jet D
Face Fix
SRH
Application Diagram for UNI-JET Tilt&Turn hardware, sash weight up to 130kg
Infill weights
Dimensioned Sketch
SRW
Hardware Versions
UNI-JET D
UNI-JET S-CONCEALED
Examples
Infill weight = 70kg/m²
With a sash rebate width
SRW of 850mm, the maximum sash rebate height
SRH is 2050mm
With a sash rebate height
SRH of 1200mm, the maximum sash rebate width
SRW is 1180mm
Remarks
Only sash formats appearing on the left of the weight
graph are permissible
Non permissible formats
are in the grey zone
© DGS Group Plc.
67
Tilt and Turn
GU Uni-Jet D
Face Fix
Item
Part Code
Part Description
Sash Rebate Width/Height
Qty Per Window
1
6-32021-00-0-1
Corner Transmission
All
1
2
6-31512-03-0-1
401-500
1
2
6-31512-06-0-1
501-750
1
2
6-31512-08-0-1
751--950
1
2
6-31512-10-0-1
951-1200
1
2
6-31512-12-0-1
1201-1450
1
2
6-31512-14-0-1
1451-1600
1
2
6-32142-00-0-1
Extension 500
N/A
1
3
G-22080-00-0-1
480-590
1
3
G-22081-00-0-1
591-750
1
3
G-22082-00-0-1
751-1200
1
3
G-22083-00-0-1
951 - 1450
1
3
G-22084-00-0-1
1201-1700
1
3
G-22085-00-0-1
1451-1950
1
3
G-22086-00-0-1
1951-2450
1
4
6-32012-00-0-1
280-750
1
5
6-32076-05-0-1
751-950
1
5
6-32076-07-0-1
951-1200
1
5
6-32076-10-0-1
1201-1600
1
6
6-32075-05-0-1
721-1100
1
6
6-32075-07-0-1
1101-1350
1
6
6-32075-12-0-1
1351-1850
1
6
6-32075-15-0-1
1851-2100
1
6
6-32075-19-0-1
2101-2350
1
7
6-29987-00-0-1
Sash Positioner
591-2090
1
8
Acc to profile
Wedge Plate
591-2090
1
9
6-32668-00-0-1
Locking Plate SE KD TBT
All
1
10
Acc to Profile
Packer to Suit
All
1
11
Acc to profile
Locking Plates
All
Dependant on
locking points
12
6-36847-24-0-1
280-500
1
12
6-36847-33-0-1
501-750
1
12
6-36847-47-0-1
751-1200
1
12
6-36847-63-0-1
1201-1600
1
12
6-36041-20-0-1
Stay Hinge
All
1
13
6-36882-22-0-1
Corner Bearing 9mm and 13mm Groove
All
1
14
6-36026-06-0-1
Stay Arm Bearing 9mm and 13mm Groove
All
1
15
9-48898-00-0-1
Stay Arm Bearing Pin
All
1
15
9-47795-01-0-*
Cover Cap for Stay Hinge
All
1
15
9-47334-01-0-*
Cover Cap for Stay Bearing
All
1
15
9-47782-00-L/R-*
Cover Cap for Corner Rebate Hinge
All
1
15
9-42683-00-0-*
Cover Cap for Pivot Rest
All
1
16
6-36138-20-L/R-1
Rebate Corner Hinge 13mm Groove
All
1
17
6-32303-00-0-1
Extension Piece
All
1
68
Required on
every window
Optional
according to
Specification
* = Specify
White or Brown
© DGS Group Plc.
Tilt and Turn
Roto NT R
Concealed
R
oto NT R Concealed
55 Designed for use on all timber, PVCu and aluminium windows with a standard eurogroove.
55 Faceplate width 16mm.
55 All cams are adjustable by +/- 0.8mm, meaning adjustments can be made on site.
55 3 locking cam versions. NT components listed here feature 3 different locking cam options
that differ in application and adjusting capabilities.
Coating Specification
RotoSil surface protection procedure has been developed by Roto for the hardware product
range, based upon galvanising, chromating and an additional sealing. RotoSil enables the
hardware components to appear in a smooth silver tone. The quality requirements of RAL-RG
607/3 are exceeded, also the protection effect against acids has been decisively improved. The
surface protection regulations of the RAL quality assurance association in Velbert, Germany are
more than fulfilled. Surface protection with RotoSil exceeds the requirements of the following
standards:
55 RAL 607/3 (72 hours protection from white rust and 240 hours protection against red rust.
Inclusive of cycle testing to 60,000 cycles).
55 BS 6375 pt. 2 “Performance of Windows.”
55 BS EN 1670:2007 part 5.6, grade 5 (480 hours building hardware corrosion resistance).
Locking Cam 'P'
Compression adjustable
security cam
© DGS Group Plc.
Locking Cam ‘E’
Compression adjustable
cam
Rotosil Surface
Protection for Roto
Hardware
69
Tilt and Turn
Roto NT R
Concealed
70
© DGS Group Plc.
Tilt and Turn
Roto NT R
Concealed
1. Corner Drives
Item
6. Standard centre lock (vertical)
SRH
Part Number
SRH
Size
Part Number
1 (1P)
451 - 2400
R01-260277
801 - 1200 (1E)
400
R01-255280
1a (1E)
310 - 450
R01-260280
1201 - 1400 (1E)
600
R01-255281
1401 - 1800 (1E)
600 connectable
R01-255282
1401 - 1800 (1E)
400
R01-255280
1801 - 2000 (1E)
600 connectable
R01-255282
1801 - 2000 (1E)
600
R01-255281
2001 - 2400 (2E)
600 connectable
R01-255282 x 2
2001 - 2400 (1E)
400
R01-255280
2. Espagnolette
Item
SRH
Part Number
310 - 450 (1)
430
R01-259717*
451 - 620
400
R01-259718*
621 - 800 (1E)
580
R01-259719
801 - 1200 (1E)
980
R01-259720
1201 - 1600 (2E)
1380
R01-259721
1601 - 2000 (2E)
1780
R01-259762
2001 - 2400 (4E)
2180
R01-259763
* Lifting and mishandling device is not possible (1)
With special corner drive 1a and TF corner drive 7a
3. Stay arm
Item
Description
Part Number
7
Tilt first corner drive
(1P) R01-260277
7a
Special TF corner drive
(1P) R01-260282
7
Tilt first striker
Profile related
*Special TF corner drive 7a should be used to acheive a SRH of 310mm.
SRW
Part Number
360 - 800
L or R Profile related
801 - 1400
4. Stay guide
SRW
Length (mm) Part Number
360 - 410
300
R01-570222
411 - 600
490
R01-570223
601 - 800
690
R01-570224
801 - 1000 (1E)
890
R01-570345
1001 - 1200 (1E)
1090
R01-570346
* Additional stay 292022 is required on sashes over
1200mm wide, increasing the maximum sash rebate
width to 1400mm.
5. Centre lock stay guide connector
SRW
Part Number
360 - 800 (1P)
R01-617126
801 - 1400 (1P)
R01-260286
© DGS Group Plc.
7. Tilt first corner drives (for tilt first window only)
8. Standard centre lock (horizontal)
SRW
Size
Part Number
801 - 1200 (1E)
400
R01-255280
1201 - 1400 (1E)
600
R01-255281
9. Corner hinge
Max. Sash Weight
Part Number
100kg Left hand
R01-254026
100kg Right hand
R01-254028
10. Pivot rest
Max. Sash Weight
Part Number
100kg
11. Compression Striker - Profile related
12. Sash lifting device - R01-260538
13. Striker for sash lifting device - Profile Related
14. Mis-operation device
Description
Part Number
Left hand 9mm axis
R01-349128
Right hand 9mm axis
R01-349129
Left hand 13mm axis
R01-349130
Right hand 13mm axis
R01-349131
71
Tilt and Turn
Roto NT A
Face Fix
72
© DGS Group Plc.
Tilt and Turn
Roto NT A
Face Fix
1. Corner Drives
4. ROTO ‘A’ stay bearing and stay pin arm
Item
SRH
Part Number
SRW
Part Number
1 (1P)
451 - 2400
R01-260277
Max. sash weight 100kg
R01-245714
1a (1E)
310 - 450
R01-260280
Pin
R01-227354
White covers for above
R01-230330
Brown covers for above
R01-230325
2. Espagnolette
Item
SRH
Part Number
310 - 450 (1)
430
R01-259717*
451 - 620
400
R01-259718*
SRW
Length (mm)
Part Number
621 - 800 (1E)
580
R01-259719
290 - 410
300
R01-260201*
801 - 1200 (1E)
980
R01-259720
411 - 600
490
R01-256024
1201 - 1600 (2E)
1380
R01-259721
601 - 800
690
R01-260204
1601 - 2000 (2E)
1780
R01-259762
801 - 1000 (1E)
890
R01-260208
2001 - 2400 (4E)
2180
R01-259763
1001 - 1200 (1E)
1090
R01-260212
1201 - 1400 (1E)
1290
R01-260215
* Lifting and mishandling device is not possible (1)
3. Stay arm 9mm axis
5. Stay guide
Item
SRH
Part Number
290 - 410
150
(L) R01-260224
* For sash rebate widths smaller than 310mm, the assembly
connector clip end of the stay guide, must be removed.
Additional stay 292022 required on sashes over 1400mm
wide.
290 - 410
150
(R) R01-260225
6. Centre lock stay guide connector
411 - 600
250
(L) R01-260226
411 - 600
250
(R) R01-260227
601 - 800
350
(L) R01-260228
601 - 800
350
(R) R01-260229
801 - 1400
500
(L) R01-260230
801 - 1400
500
(R) R01-260231
3. Stay arm 13mm axis
Item
SRH
Part Number
290 - 410
150
(L) R01-260232
290 - 410
150
(R) R01-260233
411 - 600
250
(L) R01-260234
411 - 600
250
(R) R01-260235
601 - 800
350
(L) R01-260236
601 - 800
350
(R) R01-260237
801 - 1400
500
(L) R01-260238
801 - 1400
500
(R) R01-260239
Item
Part Number
(1P) Centre Lock Stay Guide
R01-260286
7. Standard centre lock (vertical)
SRH
Size
Part Number
801 - 1200 (1E)
400
R01-255280
1201 - 1400 (1E)
600
R01-255281
1401 - 1800 (1E)
600 Connectable
R01-255282
1401 - 1800 (1E)
400
R01-255280
1801 - 2000 (1E)
600 Connectable
R01-255282
1801 - 2000 (1E)
600
R01-255281
2001 - 2400 (2E)
600 Connectable
R01-255282 x 2
2001 - 2400 (1E)
400
R01-255280
8. Tilt first corner drives (for tilt first only window)
SRH
Size
Part Number
8
(1P) Tilt first corner drive
R01-260277
(1P) Special TF corner drive
R01-260282
Tilt first striker
Profile related
Item
Part Number
8a
White covers for above
R01-230252
8
Brown covers for above
R01-230247
© DGS Group Plc.
Special TF corner drive 8a should be used to achieve an SRH of 310mm
73
Tilt and Turn
Roto NT A
Face Fix
9. Standard Centre Lock Horizontal
SRW
Size
Part Number
801- 1200 (1E)
400
R01-255280
1201- 1400 (1E)
600
R01-255281
1401- 1600 (1E)
600 Connectable
R01-255282
10. Roto A corner hinge
Maximum Sash Weight
Part Number
For 9mm axis - 100kg (L)
R01-447347
For 9mm axis - 100kg (R)
R01-447348
For 13mm axis - 100kg (L)
R01-447357
For 13mm axis - 100kg (R)
R01-447358
White covers for above (L)
R01-309951
White covers for above (R)
R01-309952
Brown covers for above (L)
R01-309949
Brown covers for above (R)
R01-309950
11. Roto A Pivot rest
Maximum Sash Weight 100kg Part Number
Left Hand
R01-262004
Right Hand
R01-262005
White Covers LH
R01-264344
White Covers RH
R01-264345
Brown Covers LH
R01-264346
Brown Covers RH
R01-264347
12. Compression Striker - Profile related
13. Sash lifting device - R01-260538
14. Striker for sash lifting device - Profile Related
15. Mis-operation device
Description
Part Number
For 9mm axis (L)
R01-349128
For 9mm axis (R)
R01-349129
For 13mm axis (L)
R01-349130
For 13mm axis (R)
R01-349131
74
© DGS Group Plc.
Ventilation
Deliveries
A fleet of 40 vehicles delivering daily
throughout the UK and Ireland.
We do not rely on carriers at DGS. We ensure
that the products you order are packed and
carefully handled then delivered using our
vans and lorries with our own drivers. We
deliver to your area every 48 hours.
NEW for 2014! A next day delivery service is
now available from select branches.
Please contact your local sales office/
representative to see if your area is covered.
DGS Group Plc.
© DGS Group Plc.
75
Handles
Espag
Cockspur
Tilt and Turn
76
Handles
Suited
Espag Handle
S
uited Espag Handle
These suited espag handles offer an attractive looking
product designed with soft grip insert to give an improved
comfort and feel during use. Available as inline or cranked
for improved hand clearance, the window handles have
been manufactured to an extremely high standard with
outstanding product performance.
Key Product Features
55 Ergonomic soft grip and improved aesthetics.
55 Push to open, key lockable.
55 Non-locking options available.
55 Inline or cranked versions.
55 Supplied with screws and cylinder immobiliser insert
to achieve non locking.
55 Variety of spindle lengths to accommodate most
profiles.
55 Spare keys and screw cover caps available.
55 Corrosion tested to BS EN 1670. Painted finishes
Grade 5, plated finishes Grade 4.
55 Available in a full choice of finishes including gold,
polished chrome and white.
55 Other finishes available upon request.
55 Corrosion resistance to BS EN 1670.
55 Painted finishes Grade 5, plated finishes Grade 4.
55 Cycle tested to 25,000 cycles under operational load.
Product Materials Specifications
55 Zinc Alloy cast components - ZL2.
55 Plastic parts - Nylon 66, UV stabilised ABS and ACETAL.
© DGS Group Plc.
77
Handles
Suited
Espag Handle
Inline Locking Handle
55 Spindle lengths: 15mm, 30mm, 40mm.
55 Colours available: Black, Polished Chrome, Gold, Satin Silver, White.
Note: These codes are for spindle length 30mm. For spindle lengths 15mm and 40mm, modify code as required. Typical codes would be
TEIL/15GD. Other spindle lengths are available. Please contact your local DGS Branch
Code
TEIL/30BK
Description
In-line Locking Espag Handle Black
Button
Black
Pack Qty
10
TEIL/30CH
In-line Locking Espag Handle Chrome
Black
10
TEIL/30GD
In-line Locking Espag Handle Gold
Black
10
TEIL/30SS
In-line Locking Espag Handle Satin Silver
Black
10
Black
10
TEIL/30WH In-line Locking Espag Handle White
Inline Non-Locking Handle
55 Colours available: Only available in white with a green button.
Code
Description
TEILN/15WHG In-line Non Locking Espag Handle White 15mm spindle
Button Pack Qty
Green 10
TEILN/30WHG In-line Non Locking Espag Handle White 30mm spindle
Green
10
TEILN/40WG
Green
10
In-line Non Locking Espag Handle White 40mm spindle
Cranked Handle
55 Colours available: White, Gold (PVD), Satin Silver,
Polished Chrome.
Note: These codes are for left hand version and spindle length 30mm. For right hand
version change ‘L’ to ‘R’ and for spindle lengths 15mm and 40mm, modify code as
required. Typical codes would be TECR/30WH.
Code
TECL/30BK
Description
Espag Handle Cranked Locking Black
Button Pack Qty
Black
10
TECL/30CH
Espag Handle Cranked Locking Chrome
Black
10
TECL/30GD
Espag Handle Cranked Locking Gold
Black
10
TECL/30SS
Espag Handle Cranked Locking Satin Silver
Black
10
TECL/30WH
Espag Handle Cranked Locking White
Black
10
78
© DGS Group Plc.
Handles
Suited
Cockspur Handle
S
uited Cockspur Handle
These suited cockspur handles are available for both
left hand and right hand operations and come in a full
selection of finishes which includes Gold (PVD), Chrome
and Traditional White.
55 Corrosion tested to BS EN 1670. Painted finishes Grade
5, plated finishes Grade 4.
55 Spare keys and screw cover caps available.
55 Ergonomic stylish design and improved aesthetics.
55 Push to open, key lockable.
55 Non-locking egress options available.
55 3 locking nib height options 9mm, 15.5mm and 21mm.
55 Available in a full choice of finishes including Gold, Polished Chrome and White.
55 Corrosion resistance to BS EN 1670.
55 Cycle tested 25,000 cycles under operational load.
55 Zinc Alloy cast components - ZL2.
55 Plastic parts - Nylon 66, UV stabilised ABS and ACETAL.
© DGS Group Plc.
79
Handles
Suited
Cockspur Handle
Note: These codes are for left hand versions. For right hand version change ‘L’ to ‘R’ and modify code as required.
Order Codes 9mm Nib Height
Code
TC09L/BK
Description
Cockspur Handle Locking Black LH
Button
Black
Nib Height Pack Qty
9
10
TC09L/CH
Cockspur Handle Locking Chrome LH
Black
9
10
TC09L/GD
Cockspur Handle Locking Gold LH
Black
9
10
TC09L/WH
Cockspur Handle Locking White LH
Black
9
10
Order Codes 15.5mm Nib Height
Code
TC15.5L/BK
Description
Button
Black
Nib Height Pack Qty
15.5
10
TC15.5L/CH
Black
15.5
10
TC15.5L/GD
Black
15.5
10
TC15.5L/WH
Black
15.5
10
Order Codes 21mm Nib Height
Code
TC21L/BK
Description
Button
Black
Nib Height Pack Qty
21
10
TC21L/CH
Black
21
10
TC21L/GD
Black
21
10
TC21L/WH
Black
21
10
80
© DGS Group Plc.
Handles
Suited Standard
Tilt & Turn Handles
S
tandard Suited Tilt and Turn Handles
This handle offers an attractive looking
product design. The grip feature gives increased
hand clearance and incorporates ergonomic soft
grip insert giving improved comfort and feel
during use.
55 Ergonomic soft grip feature and improved
aesthetics.
55 Push to open, key lockable in closed position.
55 Non-locking egress option.
55 Available in Gold (PVD), Polished Chrome, Satin Silver, Black and White.
55 Corrosion tested to BS EN 1670.
55 Base Grip - Zinc Alloy.
55 Button and Mechanism - Nylon 66 and Acetol.
Codes - Standard Versions 40mm Spindle
Code
TTTL40/BK
Description
Locking TT Handle
Colour
Black
Button
Black
Pack Qty
10
TTTL40/CH
Locking TT Handle
Chrome
Black
10
TTTL40/GD
Locking TT Handle
Gold
Black
10
TTTL40/SS
Locking TT Handle
Satin
Black
10
TTTL40/WH
Locking TT Handle
White
Black
10
TTTL40W/WH
Locking TT Handle
White
White
10
© DGS Group Plc.
81
Handles
Suited Tilt Safe
Tilt & Turn Handles
T
ilt Safe Suited Tilt and Turn Handles
This handle can be locked in the close position.
90 degree turn of the key allows movement to tilt
only. 180 degree turn of the key allows full operating
of sash. The handle has been manufactured to
an extremely high standard to give outstanding
product performance.
55 Ergonomic design and improved aesthetics.
55 When locking in the tilt position it allows
ventilation without compromising on safety.
55 White button option available on white handles for improved aesthetics.
55 Black button option available on Black, Gold and Chrome handles.
55 Available in Gold (PVD), Polished Chrome, Satin Silver, Black and White.
55 Corrosion tested to BS EN 1670.
55 Base Grip - Zinc Alloy.
55 Button and Mechanism - Nylon 66 and Acetol.
Codes - ‘Tilt Safe’ Versions 40mm Spindle
Code
TTTSL40/BK
Description
Locking TT Handle
Colour
Black
Button
Black
Pack Qty
10
TTTSL40/CH
Locking TT Handle
Chrome
Black
10
TTTSL40/GD
Locking TT Handle
Gold
Black
10
TTTSL40/SS
Locking TT Handle
Satin
Black
10
TTTSL40W/WH
Locking TT Handle
White
White
10
82
© DGS Group Plc.
Handles
Hoppe Tilt & Turn
Handles
H
oppe Tilt and Turn Handles
Lockable TBT (Tilt Before Turn) window handles
TBT technology enables the handle to be locked in the
tilted position (90°) with a key. The further moving of
the handle to the opening position (180°) is then only
possible once it has been unlocked again.
Order codes for Hoppe TBT Handles
Code
HOPTBTABK
Spindle Colour
Length
Atlanta TBT Handle 32mm
Black
Pack
Qty
10
HOPTBTABK44
Black
10
HOPTBTACH
Chrome 10
HOPTBTACH44
Chrome 10
HOPTBTAGD
Gold
10
HOPTBTAGD44
Gold
10
HOPTBTARGD
10
HOPTBTASV
Resista
Gold
Silver
HOPTBTASV44
Silver
10
HOPTBTAWH
White
10
HOPTBTAWH44
White
10
© DGS Group Plc.
Description
10
83
Window Gearing
Duoflex Folding Openers
Highline Window Gearing
84
84
Duoflex
Duoflex
Openers
D
uoflex
The openers will restrict
the opening of the window to
approximately 150mm. A link bar will
divide the opening gap in half, e.g.
a 150mm opening will effectively
become a 75mm opening which
meets recommendations for 2nd
storey and higher windows. Sash
height - a minimum sash height
of 250mm is required when butt hinges are used or 400mm if friction hinges are fitted. Pole
operated devices are not recommended for windows above 3m from finished floor level or
where windows are in deep reveal.
55 Stylish design to complement all building schemes.
55 Simple to adjust on site.
55 No need for packers.
55 3 simple options.
55 Suitable for top hung open out windows.
55 Powder coated and plated finished available.
55 Tested to over 100,000 cycles.
55 Modular single, double or triple opener system.
55 Patent pending, application number GB1108140.3
55 Made in Britain.
The information on this page is intended as a guide only
We recommend that the link bar is
approximately 2/3 to 3/4 of the sash
width E.g. Sash width x 0.75 = link bar
required, round up to nearest 50mm.
Code for the link bar STR4BAR00. A
centre ring can be fitted STRX02100.
For operation with a pole for higher
level windows (Available in 1 metre X02801011, 1.5 metre - X02801511 or 2
metre - X02802011 lengths.
© DGS Group Plc.
85
Duoflex
Duoflex
Openers
F
or Top Hung Open Out Windows
There are 3 Duoflex openers Recessed, Flush and Stepped. The information below will help
you choose which you need.
Window Type
Recessed for TIMBER
A
Part No.
STRDU01
Finish Code
Silver (20) White (25) SSP (44) PBP (43)
Other RAL colours available, please enquire.
B
C
A = Fixing centre to frame 25mm.
B = Fixing centre to sash 19mm.
C = Minimum frame width required 38mm.
Window Type
Flush for ALUMINIUM OR STEEL
Part No.
A
STRDU02
Finish Code
• A = Distance between fixing centres 25mm. Step (see B below) 0-10mm can be
accommodated.
86
© DGS Group Plc.
Duoflex
Duoflex
Openers
Window Type
Stepped for PVCU
Part No.
A
STRDU03
Finish Code
B
A = Distance between fixing centres 48mm.
B = Step from face of sash to face of frame 16mm. Step 0 - 26mm can be accommodated (It is
important that screws are fixed into reinforcement inside the profile).
C = Minimum framewidth required 38mm.
Components for sash width upto 600mm
Code
STRDUO***
Description
Folding Opener Silver
Qty Req.
1
Recommendations
Unit
Per Each
We recommend that the link
bar is approximately 2/3 to
3/4 of the sash width.
Unit
Per Each
Per Each
Per Each
Per Each
Per Each
***Folding openers selection.
Components for sash width 600mm to 900mm
Code
STRDUO***
STRBA0620
STRBA0920
STRX02120
STRENDCAP
Description
600mm Link Bar
900mm Link Bar
Centre Ring
End Caps for Link Bar
Qty Req.
1
1
1
1
2
Components for sash width 900mm to 1500mm
Code
STRDUO***
STRBA0920
STRBA1020
STRENDCAP
© DGS Group Plc.
Description
900mm Link Bar
1000mm Link Bar
End Caps for Link Bar
Qty Req.
3
1
1
2
Unit
Per Each
Per Each
Per Each
Per Each
STRDUO120 = Recessed for
Timber windows.
STRDUO220 = Flush for
Aluminium windows.
STRDUO320 = Stepped for
Pvc-u windows.
Depending on the size of the
window one, two or three
openers may be required.
87
Highline
Highline
Window Gearing
H
ighline
A range of remote window openers for high level or hard to reach windows. They operate
manually by simply winding a handle or electronically at the push of a button.
Before ordering the following information is required:
1. Do you require a manual or electric
system?
2. Window Information
55 A: Dimensions
55 B: Material
55 C: Glazing
55 D: Type of hinges
55 E: Hinge position
3. Window Positions
55 A: Number of windows
55 B: Distance of operating handle to opening
sash (sketch required)
4. If electrical system, do you require:
55 A: 24vDC or 230vAC
55 B: Manual or Automatic
For manual or electrical systems butt hinges
are preferred. If friction hinges are fitted,
ensure the friction element is removed
to allow free movement. A sketch of the
windows and layout will allow your needs to
be easily identified and will allow specifying
to be more accurate.
Once you have this information, please contact your local branch for a bespoke quotation.
88
© DGS Group Plc.
Miscellaneous
Highline
Highline
Window Gearing
Order Codes for Highline Manual
Description
Chain opener 250mm
Chain opener 380mm
Locking Opener
Operator MAXI
Operator MIDI
Operator MINI
Rotary Junction Box
Conduit 3 Metre Length
Square Conduit
Conduit Plug
© DGS Group Plc.
Code
T100
T150
T175
T210
T250
T300
T350
T400
T410
T420
Description
Inner cable per metre
Frame Saddles
Spring Stop
Brass Nut
Bracket for Aluminium
Bracket for PVC-U Vent
Bracket for Timber Vent
Conduit Connector
Bottom Hung Fixing Kit
Conduit Tool
Bend Former
Code
T450
T600
T700
T720
T740
T750
T760
T800M
T850
T900
T950
89
CE Marked Screws
Features and Benefits
Furniture to PVCu Screws
Wood Screws
Baypole Screws
Reinforcement Retention Screws
Machine Screws
Cill Screws
Masonry Screws
90
Screws
Screws Introduction
Features and Benefits
D
GS Group Plc.
Providing high quality screws for the door and window industry throughout the UK and
Ireland across our 11 branches.
Tested for Safety Tested for Quality Screws are tested for plating depth and
corrosion resistance using internationally
accepted test equipment. Salt spray testing
is in accordance with BS EN1670:2007 service
classes according to BS EN ISO 9227 and to
UKAS requirements. Carbon steel screws
are routinely tested to 300 hours and our
enhanced martensitic stainless steel carries
certification beyond 3000 hours salt spray test.
Screws Features and Benefits
Laser sorting removes swarfe = No clogged auto-feed machines.
Ductility tested to acknowledged standards = Screws will not break.
Plating is checked for depth and consistency = Plating is quality assured.
Recess measured and tested for wobble = Easier and safer insertion.
Salt spray tested in accordance with ISO9227:2012 = Corrosion resistance exceeds UK and
international standards.
Torque tested = Screws will not shear.
Tested to detect Hydrogen embrittlement = Screws will not suffer delayed failure.
Tested for speed of insertion = Faster production.
Tested for pull out = More secure fastening.
© DGS Group Plc.
91
Screws
StarPVCU™
G
uaranteed
The market leading brand, proven by the
industry’s leading companies to offer superior
performance and the best value for money
window screw range as well as a cost effective
guarantee of corrosion resistance.
Safe - Quality assurance you can trust. Strong
drill points, quick insertion, high pull-out values
and long lasting corrosion resistance. Complies
with British and European standards for quality
with on-going performance testing within an
industry leading R&D laboratory.
Experienced - Technical support, and
knowledgeable application engineers will
advise on correct fastener solutions with
approved fastener guides for all the leading
system companies. (Ask about our profile
related fixing manuals).
Fast, Reliable Supply - The comprehensive
StarPVCU™ range includes superior plated
Carbon Steel and complete Stainless Steel
solution for all window and door applications,
available for fast delivery from any of our 11
strategically placed branches.
One Stop Solution - A full range of installation
fixings and fabrication consumables are
available, including drill bits, screwdriver bits,
superglues and much more.
www.dgsgroup.co.uk
92
© DGS Group Plc.
Screws
StarPVCU™
StarPVCU™ - the market leading brand, proven by the industry’s leading companies to offer
superior performance and the best value for money window screw range as well as a cost
effective guarantee of corrosion resistance.
Furniture to PVCU
Product Code
Box Qty
CFG4.3X16
1000
CFG4.3X20
1000
CFG4.3X22
1000
CFG4.3X25
1000
CFG4.3X30
1000
CFG4.3X35
1000
CFG4.3X40
1000
CFG4.3X45
500
CFG4.3X55
500
Available in Zinc and Stainless Steel
Furniture to PVCU (Repairs)
Product Code
Box Qty
CFG4.8X25
1000
CFG4.8X38
500
Friction Stay to PVCU
Product Code
Box Qty
SFG4.3X16
1000
SFG4.3X20
1000
SFG4.3X25
1000
Friction Stay to PVCu (Repairs)
Product Code
Box Qty
SFG4.8X20
1000
SFG4.8X25
1000
Furniture to Reinforced PVCU
Product Code
Box Qty
CSR3.9X13
1000
CSR3.9X16
1000
CSR3.9X19
1000
CSR3.9X22
1000
CSR3.9X25
1000
CSR3.9X32
1000
CSR3.9X38
1000
CSR3.9X45
1000
Furniture to Reinforced (Repairs)
Product Code
Box Qty
CSR4.8X25
1000
CSR4.8X38
500
CSR4.8X45
500
Friction Stay to Reinforced PVCU
Product Code
Box Qty
SSR3.9X16
1000
SSR3.9X19
1000
SSR3.9X25
1000
© DGS Group Plc.
93
Screws
StarTurn™
Wood Screws
U
ltimate Woodscrew
The award winning StarTurn is probably
the most efficient universal screw available.
The patented StarForm™ thread provides lower
drive-in torque, quicker assembly times and
exceptional holding power.
With a choice of Pozi or StarDrive™ recess,
Full or Partial thread and sizes from 12mm to
300mm long , the StarTurn range provides a
comprehensive and cost effective solution for
many fixing and fastening applications.
Safe - Deep precision Pozi or StarDrive™ recess
within the double countersunk head, improves
grip and extends bit life.
Low torque and reduced splitting - The
patented StarForm™ thread lowers torque by up
to 50% and reduces the risk of wood splitting
without pre-drilling.
Superior Plating - Unique plating process
ensures long life, with dry lubricant to make
insertion even easier - increasing productivity in
all applications.
Quick Start - Rapidly penetrates Softwood,
Hardwood, MDF, Chipboard, Plastics and Thin
Sheet Metal.
94
© DGS Group Plc.
Screws
StarTurn™ Wood
Screws & Others
StarTurn™ - The award winning StarTurn
is probably the most efficient universal
screw available. The patented StarForm™
thread provides lower drive-in torque,
quicker assembly times and exceptional
holding power.
StarTurn Wood Screw
Product Code
Box Qty
CPF4.0X25
200
CPF4.0X30
200
CPF4.0X35
200
CPF4.0X40
200
CPF4.0X50
200
CPF4.0X60
200
CPF5.0X25
200
CPF5.0X30
200
CPF5.0X35
200
CPF5.0X40
200
CPF5.0X50
200
CPF5.0X60
200
CPF5.0X70
200
CPF5.0X80
200
CPP5.0X90
100
CPP5.0X100
100
Available in Zinc
Baypole Screw (Frame to Baypole)
Product Code
Box Qty
WSR4.8X50
200
WSR4.8X60
200
WSR4.8X70
200
WSR4.8X80
200
Reinforcement Retention
Product Code
Box Qty
RSR3.9X13
1000
RSR3.9X16
1000
Machine Screws
Product Code
M/SM5X12Z
M/SM5X16Z
M/SM5X20Z
M/SM5X25Z
M/SM5X30Z
M/SM5X35Z
M/SM5X40Z
M/SM5X50Z
M/SM5X70Z
Available in Zinc
Box Qty
1000
1000
1000
1000
1000
500
500
500
200
Cill Screw (Cill to Window)
Product Code
Box Qty
BSR4.2X42
500
BSR4.2X50
500
BSR4.2X55
500
BSR4.2X65
500
BSR4.2X75
500
Available in Zinc
© DGS Group Plc.
95
Screws
StarFix™
Masonry Screws
H
igh Tech Fixing
The award winning StarFix masonry fixing
screw that threads directly into pre-drilled pilot
holes - no anchor or plug is needed. Patented
StarForm™ self tapping thread with spaced hi-lo
thread form provides ultimate grip and allows
for multiple re-fixing without stripping the
formed tapped hole
Safe - The precision StarDrive T30 recess
provides optimum drive efficiency, improving
grip and extending grip life.
Secure - High thread cuts into masonry whilst
the low thread compacts loose material. This
gives better resistance to the fixing pulling
out of the masonry base due to more effective
thread engagement.
Faster and No Wastage - No need for plug
means a quicker application. StarFix masonry
anchors eliminate the wastage associated with
nylon installation fixings.
Lower Torque - The highly efficient StarForm™
thread lowers torque and achieves optimum
insertion into all kinds of brick, stone, concrete
and wood.
Safe and Strong - Safer, stronger installations
with a 7.5mm diameter steel fixing.
96
© DGS Group Plc.
Screws
StarFix™
Masonry Screws
StarFix™ -The award winning StarFix is probably the most efficient direct masonry anchor
available. The patented StarForm thread provides 30 percent lower drive-in torque and up to 50
percent quicker assembly. A cost effective and time saving installation with exceptional holding
power.
Cover Caps - Flush
StarFix Masonry Screws
fitting against the frame.
Product Code
Box Qty
White or Black available
FFT7.5X62
100
FFT7.5X82
100
from your nearest DGS.
FFT7.5X102
FFT7.5X112
FFT7.5X122
FFT7.5X142
FFT7.5X152
FFT7.5X182
FFT7.5X202
FFTCAPS/BLACK
FFTCAPS/WHITE
100
100
100
100
100
100
100
Cover Cap Black
Cover Cap White
StarFix Masonry Accessories
Product Code
Description
MA1/4HEX
1/4 Hex Magnetic Adaptor
SBP225ACR
Phillips No2 Driver Bit
SBP225
Pozi No2 Driver Bit
SBT30
T30 Star Driver Bit
SDS6X210
6X210 SDS Drill Bit
SDS6.5X210
6.5x210 SDS Drill Bit
STARPLUS6.0MM
6mm Drill to Driver Adaptor
STARPLUS6.5MM
6.5mm Drill to Driver Adaptor
© DGS Group Plc.
SDS Drill Bits - Full
range of SDS drill bits
available upon request.
55 No plug required.
55 Only 6mm or 6.5mm pilot hole required through substrate.
55 8mm clearance hole through frame.
55 Universal for all common applications.
55 Long lasting and stress free stand off fixing.
97
Screws
Warehousing
In total we have 120,000 sq ft. in Castle
Donington and across the country.
Over 3 million metres of warm edge spacer bar,
thousands of door and window locks and much,
much more. DGS has the capacity to supply and
deliver on time every time. Customer service
and satisfaction is paramount to any company
and at DGS our success is based on having the
right product ranges available ex stock for your
business.
DGS Group Plc.
98
© DGS Group Plc.
Elite
DGSHardware
Branches
DGS Group of
Companies
DGS (Glasgow) Ltd
Unit 1, Alpha Centre
Clyde Street
Clyde Bank
Glasgow
G81 1PS
T: 0141 9523758
F: 0141 9525910
E: Glasgow@dgsgroup.co.uk
DGS (Northern Ireland) Ltd
Unit 2B,
Westbank Business Park,
Westbank Drive,
BELFAST
BT3 9LA
T: 028 9077 2477
F: 028 9077 9339
E: Belfast@dgsgroup.co.uk
DGS Group Plc (Newcastle)
Units 15-17 Baltic Road
Riverside Industrial Estate
Felling, Gateshead
NEWCASTLE UPON TYNE
NE10 0BS
T: 0191 4690988
F: 0191 4385568
E: Newcastle@dgsgroup.co.uk
DGS (Leeds) Ltd
Unit 7, Techno Trading Estate
Station Road,
Morley,
LEEDS
LS27 8JR
T: 0113 2526313
F: 0113 2536445
E: Leeds@dgsgroup.co.uk
Note: The Irish
counties of Donegal,
Monaghan and
Leitrim are served by
our Belfast Office for
logistical reasons.
HEAD OFFICE
DGS Group Plc.
Sycamore Road,
Trent Lane Industrial Estate,
Castle Donington,
DERBY
DE74 2NW
T: 01332 811611
F: 01332 812650
E: Sales@dgsgroup.co.uk
DGS Ireland Ltd
Unit 1, Block 4,
Westlink Industrial Estate,
Kylemore Road,
DUBLIN 10
T: 01 626 1055
F: 01 626 6652
E: Dublin@dgsgroup.co.uk
DGS (Southwest) Ltd
Swansea
Unit 7, Beaufort Court,
Beaufort Road,
The Enterprise Park,
Morriston,
SWANSEA
SA6 8JG
T: 01792 700555
F: 01792 796576
E: Swansea@dgsgroup.co.uk
DGS (Southwest) Ltd Exeter
Unit H Silverton Road,
Matford Retail Park,
Marsh Barton,
EXETER
EX2 8NN
T: 01392 824129
F: 01392 824130
E: Exeter@dgsgroup.co.uk
© DGS Group Plc.
DGS (Southern) Ltd Brentwood
Unit F2, Bluegate Park
Hubert Road,
BRENTWOOD
CM14 4JE
T: 01277 218072
F: 01277 219072
E: Brentwood@dgsgroup.co.uk
DGS (Southern) Ltd
Unit 3, St. Peters Road,
MAIDENHEAD
DGS (Southwest) Ltd
SL6 7QU
Unit 54, Symondscliffe Way,
T: 01628 784971
Severn Bridge Industrial Estate,
F: 01628 780544
Portskewett,
E: Southern@dgsgroup.co.uk
CALDICOT
NP26 5PW
T: 01291 430727
F: 01291 430737
E: Southwest@dgsgroup.co.uk
99
Scan the barcode to the right with your
smartphone to get direct access to our
mobile friendly website.
Contact Us:
DGS Group Plc.
Castle Donington Head Office
Sycamore Road,
Trent Lane Industrial Estate,
Castle Donington,
Derby,
DE74 2NW.
Email: sales@dgsgroup.co.uk
Tel: 01332 811611
Fax: 01332 812650
Twitter: @dgsgroupplc
Facebook: /dgsgroupplc
www.dgsgroup.co.uk

Window Products - DGS Group Plc.

Transcription

Similar documents

Event: Elite Model Look 24th World Final

Ingenico Elite 710

ML280 Elite/ML280 Elite DC Specifications

Authorized BAC Dealers

GRAN CLUB SANTA LUCIA ***

Verkauf Frankreich 895 000

Saebo Long Term Care Program

now available! - Homestat Farm

puzzle - Dallas Voice