2.75” ROCKET POD BORE BRUSH HANDLE

 Fulcrum Concepts LLC.
1776 Patriot Way, Mattaponi, VA 23110
1(804) 798-1017
2.75” ROCKET POD BORE BRUSH
HANDLE
www.fulcrumconceptsllc.com
2.75” COLLAPSIBLE BORE BRUSH HANDLE
Simple 3-piece design allows the 2.75” bore brush to be utilized in the
same fashion as with the solid one-piece handle with the added
flexibility of collapsing the handle for storage and transportation
purposes.
PRODUCT WARRANTY INFORMATION
Fulcrum Concepts LLC (FCLLC) warrants to the Original Purchaser of
the FCLLC product (herein called the “Unit”) that such Unit, and
all parts thereof, will be free from defects in material and
workmanship under normal use and service for a period of one (1) year
from the date of shipment of the Unit to the Original Purchaser. During
this one year warranty period, FCLLC will repair or replace any
defective part or portion returned to FCLLC by the Original
Purchaser which FCLLC determines was defective due to faulty
material or workmanship.
•
•
•
•
•
CAUTIONS AND WARNINGS DISCLAIMER
Follow all rocket pod cleaning instructions as laid out in TM 9-155460-13&P
Ensure rocket pod igniter arms are in the up (unlocked) position
Always use eye protection
Always use gloves
Failure to fully thread the three sections together could cause
damage to the handle assembly
www.fulcrumconceptsllc.com
Item
Description
Part Number
Source
Contact info
1
Tube Assembly
(Handle section)
000046DA-051
FCLLC
www.fulcrumconceptsllc.com
804.785.1063
2
Tube Assembly
(Middle section)
000046DA-53
FCLLC
www.fulcrumconceptsllc.com
804.785.1063
3
Tube Assembly
(Brush end
section)
000046DA-55
FCLLC
www.fulcrumconceptsllc.com
804.785.1063
www.fulcrumconceptsllc.com
Directions for use
1. There are three specific length sections of the bore brush handle
a. Section 1- T-Handle
b. Section 2- Middle section
c. Section 3- Brush section
2. Thread an assembled rocket bore brush onto section 3, consisting of;
a. Bore Brush
NSN: 1055-00-871-8468
b. Core
NSN: 1055-00-871-8466
c. Core-nut
NSN: 1055-00-871-8467
3. Thread section 3, with brush, onto section 2.
4. Thread section 1 (T-handle) onto the combined assembly of section 2
and 3.
5. Once rocket pod cleaning is complete, disassemble in reverse order.
Any questions or concerns please contact Fulcrum Concepts LLC
directly at:
Fulcrum Concepts LLC
1776 Patriot Way
Mattaponi, VA 23110
1 (804) 785-1063
www.fulcrumconceptsllc.com