smartparts catalog

Transcription

smartparts catalog

Catalog Price - $3.00 (US)
Professional Training
3 Days !
Get Better Fast!
This 3 day training program focuses exclusively on the structural, cosmetic
and OEM integration of today’s modern luxury and performance vehicles.
Throughout this program instructors demonstrate smart fabrication
techniques and industry secrets that will enhance the way you integrate with
vehicle panels, structural components and the OEM audio system. It’s the
fastest way to bring some new skills to your shop!
UPDATED
CLASS for
2011/2012
Time is Money!
Training is structured so that you can attend the 3-day Master Tech Boot Camp
Extreme Fabrication Saturday through Monday and then fly out Monday night.
Your time away from the shop is minimal. It’s simple - no other non-product
specific training programs are available for this industry’s top level technicians
that have this range of topics. Call 480 968-2074 for more information!.
DAY 1
Fiberglass
Table Saw Router Table
Metal Fab
DAY 2
Adv. Routers
Pin Routing
Aluminum Trim
Acrylic Plastics
DAY 3
OEM Audio Integration
OScopes and RTAs
System Level Setting
Hands On Class Project
Advanced Door Panel
Fabrication Training
4 Days !
Design and Build a Custom Door Panel
This is the class you have been waiting for! We’ll fulfill any appetite you
might have for door panel design, construction and fabrication. This
four day course will demonstrate three examples of in-depth real world
designs, executed at the highest level!!! These are new techniques you
won’t want to miss out on. Make money by enhancing and reconstructing
the doors on your next installation.
Course Description (4 Days of Hands-On Training!)
in Phoenix, AZ
OUR HOTTEST
HANDS ON
CLASS
• Design and construction of a fiberglass lower pod addition
• Advanced fiberglass, in-depth router inlays and comprehensive upholstery
techniques
• Design and Modification to an OEM door panel - OEM Panel routing and
pressed snap in grilles
• Complete door panel reconstruction – We will reconstruct a complete door
panel. Start to finish, you will see every step first hand!
Prerequisites or Experience
This course is designed for attendees who have been to other
Mobile Solutions Master Tech courses or any Advanced Fabricators
/ Builders (3–5 years minimum experience recommended) Call
480 968-2074 for more information!.
For Training Information:
2
in Phoenix, AZ
(web) www.mobilesolutions-usa.com or (tel) 480-968-2074
4
Tool Packages
Starter Package
Shop Package
Professional Package
4
4
4
Smart Templates
5
5
6
6
6
6
7
7
7
7
8
8
8
8
9
9
9
10
10
10
10
11
11
11
12
12
13
14
Table Saw Accessories
Saw Jaw Blade Change Tool
Zero Clearance Inserts
Magnetic Angle Finder
5 Pc. Push Block & Stick Set
Power Push Stick
MS Push Stick
15
15
15
15
15
15
Router Accessories
Fukuda Router Tool
Fukuda Router Safety Shield
Perfect Circle
Jasper Circle Jigs
The Finger Saver
3-D Router Tool
Router Magic
Router Handbook
Woodshop Dust Control
Router Table Package
Power Tool Switch
New Router Bit & Bearing Tray Packages
JessEm Rout-R-Lift II
JessEm Mast-R-Lift II
JessEm 4 pc. Insert Kit
Porter Cable 892 Router
16
16
16
16
17
17
17
17
17
18
18
18
19
19
19
19
19
Router Bits
Spiral Flush Trim Bits
Standard Flush Trim Bits
Straight Bits
Top Bearing and Misc. Bits
20
20
20
20
21
21
21
21
Specialty Install Tools
Skewdriver HD 90º & 105º
Butane Soldering Iron
Euro Radio Removal Set
OLFA & NT Razor Knives
Pro Security Bits
Wire Split Loom Tool (a real time saver!)
44 pc. Master Radio Removal Set
Panel Removal Guide
4 pc. Scraper Set
7 pc. and 5pc Pry Tool Sets
Klein-Kurve Wire Strippers
Automatic Wire Stripper
Heavy Duty Hex Crimpers
8” Copper Cable Cutters
Klein Crimping Tool (the real thing!)
Wire Strippers
Self-Centering 3pc. Bit Set
7 pc. Taper Drill Bit Set
4 pc. Countersink Bit Set
3 pc. Step Drill Bit Set
Window Gasket Hook
6” Side Cutters
22
22
22
22
22
22
23
23
23
23
24
24
24
24
24
24
25
25
25
25
25
25
Electronic - Acoustic
TPI Hand Held Digital Oscilloscope
DMM/Scope Accessories, Test Leads
Portable RTAs
Cables / Adaptors
Phase Test Instrument PT9A
Test CDs
Battery / Charging System Analyzer
Plastic Fabrication
28
28
28
28
Adhesives
Cyanoacrylate Adhesives
Plastic Adhesives
Kent Epoxies
2 Sided Tape
Dry Laminating Film
29
29
29
30
30
Surface Prep
Kent Poly Prep
Guide Coat
Polyester High Build Primer/Surfacer
The Glü-Bot
Kent Acrysol
MS Upholstery Adhesive
31
31
31
31
31
31
Upholstery Supplies
HVLP Spray Gun Kit
Flocking - Spray Fibers
Steinel Heat Guns
32
32
32
Fiberglass Products
PVA
Resin Pigment
Fumed Silica
2 Part Urethane Foam Kit
Mold Release Wax
Fiberglass Mat and Cloth
Questions or Orders Call
33
34
34
34
35
35
35
35
36
36
36
36
Measure•Copy•Position
Pro Carpenter Measuring Tapes
Profile Transfer Wheel kit
Point-2-Point
AccuScribe Pro
Adjustable Curves
20” Multi-Purpose Protractor
Center Finder Ruler
Flexible Curve
Steel Contour Gauge
Digital Electronic Calipers
Inside/Outside Calipers
Digital Protractor
3 pc. Caliper Set
Digital Level
37
37
37
37
38
38
38
38
38
39
39
39
39
39
Sanding
26
26
26
26
26
27
27
Buffing Wheels & Compounds
Plastic Cleaners
4” Buffing Wheel Kit
Plastic Drill Bits
1/8” Chopped Strand
Fiberglass Resin
Grape Scented Styrene Mask
Clear Casting Resin/MEKP Hardener
Roller Tools
MEKP Dispensers, Mixing Cups & Sticks
10” Fiberglass Shears
Latex Gloves, Disposable Brushes
Molding Foam
Fiberglass Fillers
3M 233+ Green Tape
Plastic Spreaders, Quick Mix Sheets
33
33
33
33
33
33
Soft Sanders™
Block Sanders
Teardrop Sanders
D/A Palm Sander
Sanding pads
Round Hand Sanders
Curve-a-Flex Sander
Sand Devil Sander
40
40
40
40
40
40
40
40
BuildPro Welding Tables
Portable Welding Table
Tube Bender, Bending Brake
Magnetic Angle Clamps
Mini Clamps
3” Throat JointMaster, JointMaster 90º
Adjustable JointMaster
2 & 3 Axis Welder’s Clamps
Complete Nutsert Kit w/ Carrying Case
Compact Aviation Snip Set
Welders Handbook, Weldable Hinges
41
41
42
42
42
43
43
43
44
44
44
Metal Fabrication
Raw Materials
Aluminum/Steel Substrates & Mesh
Bendable MDF
ABS Plastic Sheets
Low Temp Plastic
Aluminum Plate
ABS Wood Grain
45
46
46
46
46
46
Table of Contents
iPod/iPhone/iPad Template Combo
New 2011 Templates
Oval Templates
Circle Templates
True Arc Templates
Complete Classic Template Set Radius Jigs (Large & Small)
Circle Gauge
Radius Gauges
Contour Gauges
Triangle Templates
Trapezoid Templates
Half Oval Templates
Shield Templates
Amp Templates
Curves Templates
Inverse Templates
Center Triangle Templates
End Triangle Templates
Dual Arc Templates
Parallel Templates
Fastback Templates
Stealth Templates
Bold Templates
Designer Sets 1-5
Master Template Set
Complete Kick Panel Templates
Smart Fill Templates
New Router Bit/Bearing Tray
Edge Profile Bits
Rabbet Bits
35pc. Bearing Kit
Miscellaneous
APS Power Supplies
Custom Fuse Blocks
MS Wearables
Temp/Humidity Clock
47
47
47
47
480-968-2074
3
®
Complete
Smart Tool
Templates
Packages
Mobile Solutions now offers complete tool packages to quickly
and efficiently outfit your garage, shop, or production facility
4
Starter Package
Qty Part number 1 ST-PKG 1
1 RA-PCIR
1 RB-102-0455
1 RB-117-0825
1 RB-100-5075
1 RB-120-0402
1 AD-2P-10SAA
1 AD-2P-10T
1 AD-TDST5
Description
Basic Template Set
Perfect Circle
1/2" Shank 2 Flute 1/4" cutter
1/2" Shank 2 Flute 1/2" Flush trim
1/2" Shank 3/4" Rabbet w/ 8 bearings
1/4" Spiral Flush Trim (1/4" Shank)
Activator for CA Glue 12oz Aerosol
Thick Viscosity CA Glue
2-Side Template
Shop Package
1 ST-ITEMP
1 ST-DS-PKG
1 RA-PCIR
1 RB-102-0455
1 RB-117-0825
1 RB-100-5075
1 RB-120-0402
1 RB-BIT-TRAY
1 AD-2P-10SAA
Part# CTP-ST
● The Mobile Solutions Shop Package is what many shop owners and managers use to
get their install team up and running quickly and efficiently when adding new fabrication
services to their daily tasks. This is a cost effective way to get the shop ready to work!
Description
Basic Template Set
IPod and iPad
Designer Sereies
Perfect Circle
Rabbet Tray Holder
Activator for CA Glue 12oz Aerosol
Professional Package
1 ST-ITEMP
1 ST-DS-PKG -4
1 RA-PCIR
1 RA-SHLD
1 RA-FKRT
1 RA-TABLE-PKG1
1 RA-RLFX
1 RB-102-0455
1 RB-117-0825
1 RB-100-5075
1 RB-120-0402
1 RB-120-0805
1 RB-152-0655
1 RB-156-0205
● With a Mobile Solutions Starter Package, you can begin to implement many of the techniques shown in a Mobile Solutions fabrication training. This set is ideal for the technician
purchasing his/her own tools.
Qty Part number 1 AD-2P-10T
1 AD-2P-10J
2 AD-TDST5
2 AD-P34000
1 MC-424-3414 1 MC-ACCU
Description
Jel Viscosity CA Glue
2-Sided Template Tape
2 Sided Foam Tape 1/4" 50ft
Profile Transfer Wheel Kit
AccuScribe Pro
Part# CTP-SP
● The Mobile Solutions Professional Package is ideal for the shop ready to jump in and
start making money with fabrication techniques taught in the Mobile Solutions training programs. It’s the package retailers choose most often when getting revitalized in their shop.
Description
Basic Template Set
IPod and iPad
Designer Series 4
Perfect Circle
Fukuda Router Shield
Fukuda Router Tool
MDF Top, Steel Frame, Power Switch
Jessem Router Lift FX II
1/2" Spiral Flush Trim (1/2" shank)
45 Chamfer Bit
1/8" Roundover Bit
Qty Part number 1 RB-156-0405
1 RB-156-0605
1 RB-156-0805
1 TS-420-2920
1 RB-BIT-TRAY
1 AD-2P-10SAA
1 AD-2P-10T
1 AD-2P-10J
2 AD-TDST5
2 AD-P34000
1 MC-424-3414 1 MC-ACCU
1 MC-12DC
Description
1/4" Roundover Bit
3/8" Roundover Bit
1/2" Roundover Bit
5pc. Push Block & Stick Set
Rabbet Tray Holder
Activator for CA Glue 12oz
Jel Viscosity CA Glue
2-Sided Template Tape
2 Sided Foam Tape 1/4" 50ft
Profile Transfer Wheel Kit
AccuScribe Pro
12" Digital Calipers
Part# CTP-PP
Visit: www.mobilesolutions-usa.com and order today!
i P o d / i P a d
S E R I E S
NEW
iPod and iPad Template Combo
Templates
With so many iPod and iPad installations taking place in consoles,
dashboards, seatbacks and other locations in the vehicle, the Mobile
Solutions Smart Template set helps you create perfect fitting inserts and
frames for these devices.
Part# ST-ITEMP
.S.a.
Made in U
If you are not sure exactly which model iPod you have to
work with, visit the Apple website to verify:
http://support.apple.com/kb/ht1353
N e w
T e m p l a t e s
New Templates
Radius Jigs
3/4"
1 1/4"
3/4"
1 1/4"
1 3/4"
1 3/4"
1"
1"
2"
1.5"
2"
1.5"
• 4 pc set (2 of each)
• 3 curves to each jig
• 3/4”-2” Radius
• Increments of 1/4”
• Guides for alignment
• Double jigs = less taping
• W = 12”, L = 9 1/2”
Part# ST-RADJIG
Mini Arcs
• 7 pc set / 14 arcs total
• Inner + outer arc lines
New Templates Package
All four new design templates shown here
Part# ST-MINIARC
SAVE
10%
Part# ST-2011PGK (Save 10%)
®
Smart Templates
Top and bottom
templates have
finger slot. Bottom
templates also
have charging
cable cutout
Complete Set Covers:
• iPod Classic
• iPod Touch
• iPhone 2/3/3GS/4
• iPad 1 and 2
Contour Gauges
• 7 pc set / 21 contours
• 3 curves on each
• 3:1 Ratio Side
• 1:1 Ratio Sides
Part# ST-CONGAU
Telephone:
Ø2.250
Ø1.250
Ø3.750
Ø3.500
Ø3.000
Ø2.500
Ø1.375
Ø1.500
Ø2.750
Ø1.750
Ø2.000
Circles Jig
• 21 Circles up to 3.75” diameter
• Centering lines to mark center
• Use for half circle or radius too
• Use to test sizing for ports
• Use to cut terminal cups
• Many other uses!
• Durable Type 1 PVC material
Part# ST-CIRJIG
480-968-2074
5
C L A S S I C
S E R I E S
T E M P L A T E S
Oval Templates
Large Oval Set (6 pcs)
•The Large set contains six
pieces. Overall width
dimensions are 6”, 12”, 18”, 24”,
30”, and 36”.
•The Medium oval set contain
five pieces. Overall dimensions
start at 2” x 14” for the smallest
and up to 12” x 24” on the
largest.
Medium Oval Set (5 pcs)
SAVE
10%
®
Smart Templates
Small Oval Set (5 pcs)
•The Small set contains five
pieces with widths of 6”, 9”, 12”,
15”, and 18.
Part# ST-LGOVAL
Part# ST-MDOVAL
Part# ST-SMOVAL
Part# ST-CBOVAL(Combo Set)
Subtle curves, aggressive designs
created with Smart Templates.
Circle Templates
Large Circle Set
(5 pcs)
•Choose from Small, Large, or a
Combination set!
•The small set contains six pieces
- (O.D.) 1 1/4”, 3 1/4”, 5 1/4”, 7 1/4”,
9 1/4” and 11 1/4”.
•The large set contains five
pieces - (O.D.) 13 1/4”. 15 1/4”,
17 1/4”, 19 1/4” and 21 1/2”.
SAVE
10%
Small Circle Set (6 pcs)
Part# ST-LGCIR
Part# ST-SMCIR
Part# ST-CBCIR (Combo Set)
Create cut-outs and trim rings
that make any product pop.
True Arc Templates
Mini Arc Set (7 pcs)
14 arcs total
Inner + Outer arc lines
True Arc 1 Set (8 pcs)
C L A S S I C
•The True Arc 1 set contains(8)
pieces, each 2” wide by 36” tall.
•The Mini Arc set contains (7)
pieces,each having an inner and outer
arc dimension (based in 14” - 28” circle
sections), these are simply a small
section of that circle.
Part# ST-ARC1
Part# ST-MINIARC
S E R I E S
View windows, and pod shapes all
created with Smart Templates.
P A C K A G E
Complete Set
The complete set contains these
Classic Smart Templates: All of the
Circles, Ovals, True Arc 1 and Mini Arc
sets. This is a great value on a “go to”
template set
.S.a.
Made in U
Patents
Pending
6
Part# ST-PKG3
SAVE
10%
R A D I U S
&
C O N T O U R
G A U G E S
Radius Gauges
•The Large set contains (6) pieces 2.5”, 3”, 3.5”, 4”, 5” and 6”.
•The Small set contains (8) pieces 1/8”, 1/4”, 3/8”, 1/2”, 3/4”, 1”, 1.5”, and 2”.
ST-RGLG
Large Set
(7 pcs)
•Available as a complete package
with both large and smal versions (best
value).
Part# ST-RGLG
Part# ST-RGSM
Part# ST-RGPKG
ST-RGSM
Small Set
(8 pcs)
Ø3.500
Ø2.250
Ø2.500
Ø1.375
Ø1.250
Ø1.500
• 21 Circles up to 3.75” diameter
• Centering lines to mark center
• Use for half circle or radius too
• Use to test sizing for ports
• Use to cut terminal cups
• Many other uses!
• Durable Type 1 PVC material
Ø3.750
Ø2.750
Ø1.750
Ø2.000
.S.a.
Made in U
Add interest to subwoofer or
component speaker grilles that
blend with the interior lines.
Circle Gauge
Ø3.000
Patents Pending
Trim out “raw” LCD monitors.
Part# ST-CIRJIG
Radius Jigs
Contour Gauges
3/4"
1 1/4"
3/4"
1 1/4"
1 3/4"
1 3/4"
Part# ST-RADJIG
1"
1"
Part# ST-CONGAU
2"
1.5"
2"
®
1.5"
• 4 pc set (2 of each)
• 3 curves to each jig
• 3/4”-2” Radius
• Increments of 1/4”
• 7 pc set / 21 contours
• 3 curves on each
• 3:1 Ratio Side
• 1:1 Ratio Sides
Smart Templates
SAVE
10%
• Guides for alignment
• Double jigs = less taping
• W = 12”, L = 9 1/2”
Radius & Contour Package
Create tight inside and outside
contours that are not always a
symmetrical radius!
All of the templates shown on this page including ST-RGLG, STRGSM, ST-CIRJIG, ST-RADJIG, and ST-CONGAU
Part# ST-RGCGPKG (Save 10%)
Telephone:
480-968-2074
7
D E S I G N E R
S E R I E S
T E M P L A T E S
Triangle Templates
Triangle Set
•The Triangle set contains (6) pieces
ranging from 38 1/2” x 15 1/2” to
4 1/2” x 3 1/2”.
Smart Templates
®
Part# ST-DS-TRI
The Triangle Templates work
perfect for window reveals
Trapezoid Templates
•This set contains (9) pieces ranging
from 36”x18 1/2 to 11 1/4” x 2 1/2”
with 3/4” wall thickness.
•The set is designed specifically for
creating trim panels for amplifiers
and other rectangular components.
Part# ST-DS-TRAP
Patented - US Pat #D640685
Combining shapes will give
you great results
Half Oval Templates
•This popular (5) piece set comes
with detailed score lines to help
position them center on your project.
•The sizes range from
17 3/8” x 11 3/4” to 5 3/4” x 3 3/4”.
Part# ST-DS-OVAL
Use the Half Oval Templates
to accent speakers
Shield Templates
from 21.1/2” x 20” to 3.1/2” x 2.1/2”.
•This set is machined 1/4” apart
between sizes and have matching
radiuses.
Part# ST-DS-SHIELD
.S.A.
Made in U
8
Patents Pending
The Shield Templates create
dynamic curves.
D E S I G N E R
S E R I E S
T E M P L A T E S
Amp Templates
•The set contains (8) pieces ranging
from 21 1/4” x 15 1/2” to 8 1/4” x 2 1/4”.
•This set is like a basic rectangle
shape, but with sweeping external
curves around all sides.
Part# ST-DS-AMP
Curves Templates
from 21 1/2” to 17 1/4” to 10 1/8” x 3 1/2”.
•Use this shape to highlight the
installation and not the square and
round audio system components.
Part# ST-DS-CURVE
Curves used in the EA Sports Infiniti
QX56 “Ultimate Gaming Vehicle”
Inverse Templates
from 21 3/5” x 13 5/8” to 8 1/2” x 2 3/4”.
•This set features inverse, deep
curves that make a real statement.
Part# ST-DS-INVER
Why do the expected, when you can
give your clients something to
brag about?
.S.a.
Made in U
Patents Pending
How To Use Designer Series Templ ates
Telephone:
®
Step 1: Building the frame work is essential for keeping
the shapes symmetrical. Notice the two different Parallel
Templates used, the woofer trim uses the same template
back-to-back giving it a nice flow.
Step 2: Once the frame work is complete, the edges
and bottom layer are taped off for protection. Two part
foam is then added to give the panels clean contours and
smooth edges for the fiberglass.
Step 3: The next step is to add fiberglass for strength
and then bondo to shape and smooth out any uneven
surfaces.
Step 4: Clean and Tight, with a good selection of
materials, Vinyl, Suede, Acrylic and Aluminum mesh. This
is a great example of how to use our Smart Templates.
Save time and create amazing designs…your imagination
is the limit!
Smart Templates
Create trim edges that will
compliment any amplifier.
Step 1
Step 2
Step 3
Step 4
480-968-2074
9
D E S I G N E R
S E R I E S
T E M P L A T E S
Center Triangle Templates
from 12 7/8” x 11 3/8” to 4” x 3 1/2”.
•The Center Triangle set is designed
to accent the Parallel and the
Dual Arc template sets.
•They can be used in the center or
ends, or simply by themselves
Part# ST-DS-CENTRI
End Triangle Templates
®
Smart Templates
Center Triangle create focal points.
•This set contains (8) pieces
ranging from 6 1/2” x 11 3/8”
to 2” x 3 1/2”.
•The End Triangle set is designed
to accent the Parallel and the
Dual Arc template sets on the
ends - either as a set or along with
the center triangles.
The combination of End Triangles and
Dual Arc Templates create great
compliments.
Part# ST-DS-ENDTRI
Dual Arc Templates
from 25” x 14 3/4 to 11” x 3 1/2”.
•The dual arc set has a unique
symmetrical design that allows
your installations to have center
focal point, great for amps, signal
processors, or even ports.
Bring out major elements or
subtle accents.
Part# ST-DS-DUAL
Parallel Templates
from 26 1/8” x 14 3/4” to 12 3/8” x 3 1/2”.
•The gentle curve and straight lines
combine to make this a great shape
for most of today’s automotive
interior styling.
Part# ST-DS-PAR
Curves inset into the Parallel Template
adds sophistication
E x a m p l e s
Patents Pending
Parallel & Center Triangle Templates
Parallel & End Triangle Templates
Dual Arc & End Triangle Templates
Dual Arc & Center Triangle Templates
.S.A.
Made in U
10
D E S I G N E R
S E R I E S
T E M P L A T E S
Comet Templates
9
8
7
6
5
• This set contains (9) pieces ranging from 34 1/4” x
13” to 5 1/4” x 2”
• The Comet can be mounted in a left or right
application, specifically door panels,
rear trunk panels, etc
• The sleek design works great for center consoles
4
3
2
1
Smart Templates
Part# ST-DS-COMET
Fastback Templates
• This (8) piece set ranges from 37 1/4” x 15”
to 12 1/2” x 3”
• The sleek design and smooth curves can be used
to add a unique design to any installation
• The Fastback can also be used for carpet inlays,
door panels and center consoles too
8
7
6
5
4
3
2
1
Part# ST-DS-FASTBACK
Stealth Templates
8
7
6
• This set contains (8) pieces ranging from
24” x 14 1/2” to 8 1/2” x 2”
• The Stealth Templates have the unique ability
to be installed left and right style or they can
be inverted upside down
• This asymmetrical design is great amp racks,
viewing windows, rear deck grilles and
subwoofer enclosures
5
4
3
2
1
Part# ST-DS-STEALTH
9
Bold Templates
8
7
6
5
• This set contains (9) pieces ranging from 20 3/4” x
19 1/2” to 4 3/4” x 5 1/4”
• The Bold template set is ideal for center
consoles, dashboard accents, subwoofer ports,
and rear deck grilles
• This set can also be paired together horizontally to
create a complete subwoofer or amp rack trim
panel combination
4
3
2
1
Part# ST-DS-BOLD
E x a m p l e s
Dual Bold Templates (Horizontal)
Dual Stealth Templates (Inverted)
9
9
8
4
4
9
8
9
3
5
.S.a.
Made in U
8
6
6
8
5
3
Dual Fastback Templates
(Vertical)
®
Patents Pending
Dual Comet Templates (Along Centerline)
Telephone:
480-968-2074
11
D E S I G N E R
S E R I E S
P A C K A G E S
Complete Set 1
•The combination set of Triangle, Trapezoid, Half Oval and Shield
templates will enhance your design options and save you valuable
fabrication time.
Part# ST-DS-PKG
•The combination set of the Amp, Inverse and Curve templates
provide the versatility of design that keeps your designs fresh and
contemporary.
Part# ST-DS-PKG2
Complete Set 3
•The combination set of the Parallel, Dual, Center Triangle and
End Triangles allow you to create unique design solutions.
•Mix and match these shapes and the possibilities are endless.
Part# ST-DS-PKG3
Complete Set 4
8
8
7
7
6
•The Comet, Fastback, Stealth and Bold templates in a package
for modern and aggressive designs that catch the eye!
Part# ST-DS-PKG4:
6
5
5
4
4
3
3
2
2
1
1
8
7
6
5
•All of the Designer Series templates in Packages 1, 2, 3 and 4 shown on this page (a total of 15 Designer Series template sets!)
Part# ST-DS-PKG5:
SAVE
10%
Package Pricing is
the Best Value!
Master Template Set
•Our most popular templates in one huge combination set.
•It’s the ultimate for any master fabricator. Take your designs to
the next level and beyond.
Original and Designer Template Sets:
ST-PKG3 (Classic) and ST-DS-PKG5 (Designer)
Kick Panel Templates:
ST-KIC-PKG525, ST-KIC-PKG65
iPhone/iPad/iPod:
ST-ITEMP
Contours and Radiuses:
SAVE
ST-RGCGPKG
10%
8
Complete Set 5
2
1
5
4
2
7
6
3
3
4
Part# ST-MASTERPKG
12
9
9
1
Smart Templates
®
Complete Set 2
K I C K
P A N E L
T E M P L A T E S
Asymmetrical Template
•The Asymmetrical design has a
timeless shape that will enhance any
door panel, kick panel or rear deck
for most vehicles.
•Overall dimensions are 6”(W) x 9”(H)
for the 5 1/4” and 8”(W) x 12”(H) for the 6”.
Create panels that really kick!
SUV Template
•The SUV speaker template is designed
for large vehicles with strong accent lines
(For example Infinity QX56 or H2).
•Overall dimensions are 6 5/8”(W) x
9” (H) for the 5 1/2” and 8”(W) x 10 1/2”(H)
for the 6 1/2”.
Part# ST-KIC-SUV525
Part# ST-KIC-SUV65
Place speakers anywhere
Angle Template
•The Angle speaker template can be
positioned and rotated to fit in several
vehicle locations, which makes it very
flexible for numerous applications.
10 1/4”(H) for the 5 1/4” and 8 3/8”(W) x
12”(H) for the 6 1/2”.
Part# ST-KIC-ANG525
Part# ST-KIC-ANG65
Perfect for dual speaker
configurations or that large
midrange driver
Teardrop Template
•The teardrop template has a timeless
shape and is designed for tight profiles
when space is a premium.
9 3/8”(H) for the 5 1/4” and 8 1/4”(W) x
11 3/4”(H) for the 6 1/2”.
Part# ST-KIC-TEA525
Part# ST-KIC-TEA65
This style is the traditional
kick panel look for component
speaker sets
Complete 5.25” Template Set
Complete 6.5” Template Set
Includes:
Asymmetrical Set: ST-KIC-SYM525
SUV Set: ST-KIC-SUV525
Angle Set: ST-KIC-ANG525
Teardrop Set: ST-KIC-TEA525
Part# ST-KIC-PKG525
Patent Pending
.S.A.
Made in U
Telephone:
®
Complete Kick Panel Package
Smart Templates
Part# ST-KIC-SYM525
Part# ST-KIC-SYM65
Includes:
Asymmetrical Set: ST-KIC-SYM65
SUV Set:ST-KIC-SUV65
Angle Set:ST-KIC-ANG65
Teardrop Set:ST-KIC-TEA65.
Part# ST-KIC-PKG65
SAVE
10%
480-968-2074
SAVE
10%
13
S m a r t
F i l l
T e m p l a t e s
®
Smart
Smart
Fill
Templates
Templates
•Smart Fill Templates offer a fast unique way to add raised lettering
to any panel
•1/16” Laser cut plastic offers positive or negative impressions
•Custom shapes and logos are available on request
.S.a.
Made in U
14
Patent Pending
ST-BT-ALPINE
ST-BT-CADILLAC
ST-BT-PORSCHE
ST-AP-MS
ST-BT-KEN
ST-BT-ESCALADE
ST-BT-INFIN
ST-BT-SKULL
ST-BT-JLAUDIO
ST-BT-MEC
ST-BT-HUMMER
ST-BT-TRIBAL1
ST-BT-KICKER
ST-BT-LEXUS
ST-BT-H1
ST-BT-TRIBAL2
ST-BT-PIONEER
ST-BT-TAHOE
ST-BT-BOWTIE
ST-BT-TRIBAL3
ST-BT-ARC
ST-BT-CORVETTE
ST-BT-ALTEC
ST-BT-FLAMES
ST-BT-HERTZ
ST-BT-AUDISON
ST-BT-RF
ST-BT-COBRA
How To Use Smart Fill Templ ates
Smart Fill Templates offer a simple
fast way to add raised lettering to any
surface (wood, fiberglass, plastic,
and metal). Save countless hours of
cutting sound damping or vinyl to get
this unique look. Apply spray glue to
the back, position the template, add
body filler, then remove the template,
and your done…Simple, Fast, Easy!
Just like many of our other templates,
these can be used countless times for
high duplication. They are made from
a durable 1/16” ABS plastic and laser
cut for precision. Our SFT can also
be reversed to have an Embossed or
Debossed look, apply body filler to the
inside or outside shapes to achieve your
custom panel.
Step 1: Spray a release agent to top/bottom to ensure
filler won’t stick, and can be removed.
Step 2: Apply body filler to inside openings (no
bubbles). Build filler over the entire template.
Step 3: Sand surface of the body filler to expose detail in
plastic, allow template to be removed without damage.
Step 4: Remove template.
Step 5: Carefully sand the top of the filler
left on the panel.
Step 6: At this point the panel can be covered with
vinyl or primed and painted.
5 Pc. Push Block & Stick Set
short work of changing blades
on your table saw.
•The Saw-Jaw will safely store
one blade after removal.
•Gives you a good grip and keeps
your hands safely away from
small or thin stock cutting edges.
•Use with your router table,
table saw, shaper or jointer.
Part# TS-400-1047
Part# TS-420-2920
Zero Clearance Inserts
•Made of Double-Sided
Power Push Stick
Part# TS-400-1070
•The power push stick is
exceptionally rigid and has a spring
loaded pin to keep the right amount
of tension on your material.
•This is the top of the line,
day-to-day push stick you’ve
been looking for!
Part# TS-400-1076
Part# TS-420-4200
Laminated High Density
Phenolic (DLHDP)
which is extra hard and rigid.
Material slides across it like
glass. (Colors may vary)
Zero Clearance Insert (Delta/Grizzly)
Zero Clearance Insert (JET).
Finger access for
easy removal
Magnetic Angle Finder
•How cool is this? A digital
angle gauge with a magnetic
base to make checking your
work or finding an angle a
breeze.
•Take the guesswork out of
setting up those critical bevel
cuts on your table saw, drill
press, or angle base router.
MS Push Stick
•Made for use in all situations.
•It’s made from 1/4” PVC plastic
is ideal for table saws of
all types.
Part# TS-PUSH
.S.a.
Made in U
Part# MF-424-0130
Advanced Subwoofer Design, Acoustics & Fabrication Training
Design and Build Unique Subwoofer Enclosures!
This 4 day program is the one you’ve been waiting for. We teach concept to
completion on the most advanced, cutting edge subwoofer enclosure designs in
the industry. You will learn how to correctly calculate complex enclosures, use the
latest computer design software, work with multiple materials, design and fabricate
irregular shapes, build your own project, and much more.
4 Days !
in Phoenix, AZ
Topics covered:
• Advanced Enclosure Design
Software
• The Secret 12 Minute Fiberglass
Technique
• Techniques and Tricks for Fast
Molding and Shaping
• Advanced 3-Dimensional Router
Techniques
• Individual Hands-On Project
®
HANDS ON
CLASS
Table
Smart
Saw
Templates
Accessories
•This handy tool will make
Visit www.mobilesolutions-usa.com for more information and a class schedule
Telephone:
480-968-2074
1155
Fukuda Router Tool
®
Router
Smart Accessories
Templates
12x12” Version
Patent Pending
•The original adjustable square
jig tool designed by Mark Fukuda.
Duplicate any square or rectangle
shape precisely from 3/8” to 12”
(or up to 36” using RA-FKRT-EX).
•Machined from 1/2” aircraft grade
6061 billet aluminum
•Brushed finish
•Clear anodized for smooth operation
•Knurled nylon adjustment screws
•Stainless steel stop screws
Part# RA-FKRT: This guide will ensure that you
get the perfect and precise cut
every time.
Part# RA-FKRT-EX:
Fukuda (12”x12”) Router Tool
Fukuda (36”x36”) Router Tool
.S.a.
Made in U
Fukuda Router Safety Shield
•The Fukuda Router Safety Shield
is made of sturdy 1/2” optically clear
acrylic and has high impact
type 1 PVC plastic handles.
•This not only keeps your hands safe,
but adds an additional guard between
the work piece and your body.
.S.a.
Made in U
Part# RA-SHLD
Patented - US Pat #5,967,209
Attach the template or jig then attach the
substrate to the jig.
Perfect Circle
.S.a.
Made in U
•Cut precision inside and outside
diameter holes.
•Great for cutting woofer holes,
small circles, and giant arcs from
1” all the way up to 30”.
•Machined from 1/2” aircraft grade
6061 billet aluminum
Part# RA-PCIR
Extends to cut up to a 30” hole
or use as a large arc with just a
small section of a round cut!
Note: Available for most routers.
Call or visit our website for more detail
Never miscut another circle.
Get it right the first time with the
Perfect Circle router jig.
Jasper Circle Jigs
•Jasper circle cutting jigs are clearly
marked and simple to use.
•CNC machined from ¼”
polycarbonate and pre-drilled to fit
19 different models of plunge routers
Part# RA-JSLG
Large Jasper Jig
Part# RA-JSSM
Small Jasper Jig
16
The Finger Saver
•For router or even table saws,
bandsaws, drill presses, jointer, etc.
•For small parts that might cause
your hands to be to close to the
cutting blade (especially aluminum).
Keeps your hands away from the blade.
Cut small shapes without risk.
3-D Router Tool
•When routing tall or thick items
like trim bars, compound curve face
plates, and other designs that
needs to be shaped, you will find the
3D routing tool to be a time saver.
Part# RA-400-1255
.S.a.
Made in U
Make curved head unit face plates (above), armrests and door pulls on
custom panels or many other fabricated pieces that have compound
curves. Use the 3D Router Tool in combination with MS router bits to
achieve unique shapes.
Router Magic
•Now you can teach your router to do magical tricks you
never dreamed possible! All you need are a handful of
standard bits and the extraordinary jigs, fixtures, and
techniques inside this book.
•Craft flawless cope-and-stick joints on your router table,
quickly and easily
Part# RA-404-6993
Router Handbook
•More than 1,000 photos and drawings showcase a brilliant
array of how-to instructions. Everything’s covered: sharpening
and maintenance procedures, making and fitting exact joints,
cutting, lots of jigs, safety - and lots more.
®
Part# RA-405-0518
Router
Smart Accessories
Templates
Part# RA-420-1010
Woodshop Dust Control
A complete guide to all of the methods of protecting our lungs from
harmful wood dust. From developing a dust control strategy and
installing air filtration to making the best use of shop vacuums, this
book addresses the important environmental and health issues
associated with wood dust control.
Part# RA-402-8499
Telephone:
480-968-2074
17
Router Table Package
Now you can get fabricating fast!
We have put together a great router table package that’s virtualy turnkey and includes everything you need to get started within less than an
hour of assembly. You’ll be fabricating your next masterpiece in no time!
• TOP: The Rout-R-Top™ is made from 1” thick high density fiber board with high
pressure laminate on the top and bottom. The top is edge banded for long life.The
Rout-R-Top™ is available pre-machined to fit our Mast-R-Lift II™ and Rout-R-Lift
II™. (See facing page for details, but lifts not included with this package)
• TABLE: Solid heavy duty tubular leg construction. Quick and easy assembly with
riveted steel nuts pre-installed and ready to be bolted. Black powdercoat finish for
durability.
®
Router
Smart Accessories
Templates
Specifications:
The table comes standard with corner and side levelling pads. Each corner levelling
pad is designed with tapped brass inserts which allow for (2) levelling set screws.
The levelling set screws can be adjusted with a hex key from the bottom of the table.
Each levelling set screw is provided with a jam nut to secure the set screw at the
proper height. Each corner levelling pad is designed with a center hole for securing
the insert plate securely in the table opening.
Note: Router Lifts and Routers
are all sold separately.
(Additional shipping & handling
to the 48 contiguous US states.)
Call for rates to Hawaii, Alaska,
and International.
• SWITCH: New remote motor switch for our complete router tables. Features safety
switch with removable key, 2 plug receptacles for your router and dust collection and
8 feet of grounded cord. Switch is 15 Amp and bolts directly to the table frame.
The Mobile Solutions Router Table will accommodate any of the router
lifts that we sell (but not included). You can be up and running putting
your new router table to work in about an hour!
Part# MS-PRT
Includes: Steel Frame, Top and Safety Switch
Power Tool Switch
Universal Power
Tool Switch
•This mechanical push button switch features an oversized red
stop paddle to quickly shut off power to your tool in an instant.
•When the switch is in the off position, a safety catch locks out
the on button to prevent accidental starts.
•This switch is ideal for router tables or any 110V stationary
power tool. This is a universal power switch (different than the one shown on the router table package above).
Part# RA-415-0840
New Router Bit & Bearing Tray Packages
Stop losing and misplacing your router bit bearings. Finally
there’s a place to keep everything AND easily determine which
one you need - rabbet OR oversize!
• Cutouts for 9 bearings and holds bits too
• Laser etched markings for oversize and reduction cuts
• Clear acrylic top plate and rugged expanded PVC base
• Dimensions are approx. 12”W x 5”L x 1”D
1
Bit Tray with Rabbet & Flush Trim
This kit contains:
(1) RB-100-5075
(1) RB-117-0825
(1) RB-BIT-TRAY
2
11 bearings, 1 Super
Rabbet and 1 twoflute Flush Trim Bit
Bit Tray with Rabbet, Flush and 8
Oversize
3
This kit contains:
(1) RB-100-5075
(9) RB-117-0825
(1) RB-BIT-TRAY
1 Part# RA-BIT-TRAY
2 Part# RA-BIT-TRAY RABBET KIT
An oversize bit for
EVERY bearing, plus
Rabbet and Flush
3 Part# RA-BIT-TRAY OVERSIZE RABBET KIT
18
JessEm Rout-R-Lift II
Part# RA-RLFX
Rout-R-Lift II
JessEm Mast-R-Lift II
•Has been designed for heavier duty
applications using the big PorterCable 7518
3-1/4HP router (see below).
•Heavy duty top plate is precision machined from
1” solid aluminum instead of phenolic.
•Can be adapted to fit other routers by using
Mast-R-Lift adapters (please call for assistance
before ordering)
Part# RA-MAFX
Mast-R-Lift II
JessEm 4 pc. Insert Kit
•This set of 4 phenolic inserts is an accessory to both the
Rout-R-LiftFX and the Mast-R-Lift.
•Each router plate comes with one 1 1/2” insert ring standard,
but this adds 1/4”, 1/2”, 1.375”. and 2.5” inserts so you can
use both larger and smaller router bits while maintaining
support near the bit edge and maximum vacuum from the dust
collection system.
Part# RA-INST
•The 890 series from Porter Cable is loaded with great features
to give you an easier-to-use, more powerful, and versatile router.
•Ideal for all router table applications (especially in our
Rout-R-LiftFX and complete router table package MS-PRT).
•This package includes 2-1/4 HP motor with fixed base and
multi-function carrying case.
Part# RA-PC892
®
Router
Smart Accessories
Templates
•Allows you to make quick router bit changes
from above the table and was specifically
designed for today’s most popular 1-3/4 to
2-1/4 HP fixed-base router motors.
•The top plate is CNC machined from 3/4”
phenolic for a perfectly flat and durable
surface.
•Fits Porter Cable 690 and 890 series,
Bosch 1617/18, and DeWalt 610, 616,
and 618 routers.
•The 7518 series from Porter Cable is the “big daddy” of routers.
•Ideal for all router table applications (especially in our
Mastr-R-Lift and complete router table package MS-PRT).
•This package includes 3-1/4 HP motor with fixed base and
multi-function carrying case.
Part# RA-PC7518
Telephone:
480-968-2074
19
Spiral Flush Trim Bits
•Use the spiral flush trim bits for finishing work saving you several steps
in sanding and polishing when used on acrylic plastics or MDF!
(Not for use on aluminum or nonferrous metal).
•Spiral bits also have 4 times the operational life of a standard
2 flute bit.
•Just like all our bits these offer smooth, burn free cutting and are
made from precision ground extra thick carbide. Available in 1/8”
(no bearing - has a brass pilot), 1/4” with a flush mount double bearing,
and the 1/2” monster, also with a double bearing and lock nut
attachment. If you’ve seen our Extreme Fabrication training, you
know you can’t afford to be without these important router bits!
.S.a.
Made in U
Smart
Router
Templates
Bits
®
The flush double bearing
makes it the ideal bit for
copying the thinnest shapes
because it won’t eat into
the template like traditional
flush trim bits!
Part# RB-120-0202
Part# RB-120-0805
Part# RB-120-0402
Part# RB-120-0825
1/8” Spiral Flush Trim (1/4” Shank)
1/8”
1/4”
1/2”
(X-Tall)
1/2”
1/2” Spiral Flush Trim (Taller 1/2” Shank)
Standard Flush Trim Bits
•These bits offer smooth, burn free cutting.
•Precision ground extra thick carbide with a top quality ball bearing pilot
for longer tool life.
•The two flute bits provide fast, economical cutting for MDF, plastics,
or aluminum. Use the standard 2 flute for day to day flush trimming.
•Use the 3/4” diameter “shear angle” flush trim bit for flush trimming
thick acrylic, aluminum or other non ferrous metals.
Part# RB-117-1245
Part# RB-117-0835
Part# RB-117-1825
Part# RB-117-0822
3/4” Shear Angle, 2 Flute (1/2” Shank)
3/4” Shear
Angle
3 Flute 2 Flute
2 Flute
(1/4” Shank)
1/2” 2 Flute w/ 2 Top Bearings
1/2” 3 Flute Flush Trim (1/2” Shank)
Part# RB-117-0825
Spiral Cutters
1/2”, 3/8” & 1/4”
2 Flute
1/2”, 3/8” & 1/4”
Straight Bits
•These bits are intended for hand held routers NOT table mounted routers.
•Use the cutting bits for circle or pattern cutting with our Perfect Circle
or Jasper jigs as well as with the Oval Jig to make your own
large arc patterns.
•Available in spiral or 2 flute cutters.
Part# RB-102-0645
Part# RB-106-0885
Part# RB-102-0845
Part# RB-106-0665
Part# RB-102-0455
Part# RB-106-0462
3/8” 2 Flute (1/2” Shank)
2 Flute
(1/4” Shank)
1/2” Spiral (1/2” Shank)
Top Bearing and Misc. Bits
3/4”
Cutter
1/2”
Shank
•Top Bearing Bits are for flush trimming with a hand-held router OR in a table
with the new 3D Router Tool! Use for pattern cutting or duplication too.
•V-Groove bit is for clear acrylic and light dispersion accents
1/2”
Cutter
•Bull Nose bit is for adding subtle detail to flat panel surfaces (embossed lines)
Part# RB-102-0832B
1/2” Top Bearing Flush (1/4” Shank)
1/4”
Shank
Part# RB-102-1265B
3/4” Top Bearing Flush 2” Tall (1/2” Shank)
Bull Nose Bit
20
Part# RB-132-0815
V-Groove Bit w/45º Cut (1/2” Shank)
Part# RB-130-0802
Bull Nose Bit w1/2” Radius (1/4” Shank)
V-Groove Bit
Standard Roundover Bits (1/2” Bearing, 1/2” Shank”)
Edge Profile Bits
•Create unique visual edge finishing with one or several of these bits.
•These are demonstrated throughout the Mobile Solutions
Extreme Fabrication Master Tech training programs.
•Your design pallet just gets so much more creative with the right
edge profile choices and you can make otherwise similar shapes
look unique (all pictured at right).
Mini Chamfer/Roundover
Roundover Bits:
Bits:
Part# RB-156-1605
1” Roundover (1/2” Shank)
Part# RB-159-0602
3/8” Mini Roundover (1/4” Shank)
Part# RB-156-1205
3/4” Roundover (1/2” Shank)
Part# RB-159-0402
Part# RB-156-0805
Part# RB-159-0202
Part# RB-156-0605
Part# RB-159-0102
Part# RB-156-0405
Chamfer Bits:
Part# RB-156-0305
Part# RB-152-0625
Part# RB-152-0655
Part# RB-152-0305
Cove Bits:
Part# RB-154-0805
1/2” Cove (1/2” Shank)
Part# RB-154-0605
45º 1/2” Shank, 1” Cutter Height
1/4”
3/16” 1/8” 1/16”
Cove Bits 1/2” Bearing (1/2” Shank”)
1/2”
3/8”
1/4”
1/8”
Mini Chamfer and Roundover Bits (1/8”
Bearing, 1/4” Shank”)
45º Chamfer Bits
(1/2” Bearing, 1/2” Shank”)
Part# RB-152-0505
30º Chamfer Bit (1/8 x 1/2” Shank)
Part# RB-152-1105
11.25º Chamfer Bit (7/8 x 1/2” Shank)
Specialty Bits:
Part# RB-111-0412
Part# RB-154-0202
Part# RB-102-0802
Handrail Bits:
Part# RB-174-4005
Part# RB-174-2005
1” Handrail (1/2” Shank)
3/8”
22.5º Chamfer Bit (3/16 x 1/2” Shank)
Part# RB-154-0405
1/2”
45º Chamfer Bit, 5/8” Cutter Height
Part# RB-156-0102
3/4”
Solid Carbide Fiberglass Cutting Bit
Dado Clean-out: 1/2 x 1/4 x 1/4” Shank
3/8”
1/4”
1/8”
1/16”
Handrail Bits
(1/2” Bearing, 1/2” Shank”)
7/16” Handrail (1/2” Shank)
5/8”
Cutter
Height
1”
Cutter
Height
Specialty Bits
Rabbet Bits
•Two Rabbet Bit Choices - 1” tall, 1/2 rabbet bit or the new Super Pro
rabbet bit kit with rabbet depths up to 3/4” and comes with 9 bearings.
1” “Helicopter”
RB-150-1325
9/16” Rabbet Bit (1/2” Shank)
Bearing Kit
RB-100-5075
Super Pro Kit, 3/4” (1/2” Shank)
9/16” Depth Rabbet
(Bit w/1 bearing)
Dado Bit Fiberglass
Cutting Bit
Master Bearing Kit
•35pc Master Bearing Kit
•Incl. hardware & lubricant
.S.a.
Made in U
Super Pro Rabbet Kit
RB-199-9640
(Comes w 9 bearings)
35 Pc. Master Bearing Kit
See Page 18 for additional information on the Bit/Bearing Tray Kits!
RA-BIT-TRAY RABBET KIT
Tray + Super Pro Rabbet Kit + 1/2” Flush Trim Bit
RA-BIT-TRAY
Holds 11 1/2” Shank Bits + 9 Bearings (tray only)
Telephone:
®
New Router Bit/Bearing Tray
Stop losing and misplacing your router bit bearings.
Finally there’s a place to keep everything AND easily
determine which one you need quickly and easily.
7/16” Cutting
Height
Smart
Router
Templates
Bits
Part# RB-156-0205
1”
RA-BIT-TRAY OVERSIZE RABBET KIT
Same as at left, but adds 8 more Flush Trim Bits
• Cutouts for 9 bearings + 11 1/2” shank bits • Laser etched markings for over/under cuts
• Acrylic top plate and expanded PVC base
• Dimensions = approx. 12”W x 5”L x 1”D
480-968-2074
21
Skewdriver HD 90º & 105º
HD90 - •Features a fold out handle and 90 degree angle.
HD105 •Features a heavy duty 105 degree skewdriver head for power
drill applications
Part# SI-HD-90
HD105
(Cut Away)
Part# SI-HD-105
The HD105 has extra heavy duty gears for use with
cordless power drill applications
OLFA & NT Razor Knives
®
Specialty
Install Tools
Smart Templates
HD90
OLFA Replacement
Blades (50 pack)
NT Replacement
Blades (50 pack)
OLFA and NT “Red Dot” Auto-Lock stainless steel razor knives are
designed with an auto-locking blade slide and stainless steel handles.
Part# UP-50-AL
Part# UP-516-NT
Part# UP-531-10
Part# UP-532-50
Olfa Razor Knife (Auto Lock)
OLFA
NT Red Dot
NT Razor Knife (Auto Lock)
Olfa Replacement Blades (10 Blades)
NT Replacement Blades (50 Blades)
Part# UP-531-50
Olfa Replacement Blades (50 Blades)
Pro Security Bits
•This set has 100 total pieces of assorted security bits including spline
drive, tamper proof and standard versions of Torx and Allen,
Robertson, Straight, and Phillips.
Part# SI-9448
Butane Soldering Iron
•This may be the best butane soldering iron you have ever seen.
•Made by Steinel (the same company who makes the best heat guns).
•This kit has everything you need to do cordless soldering.
Part# SI-TS600K
Wire Split Loom Tool
• The SI-WSLT-1 is a rigid plastic tool that pulls wire through split loom in seconds.
• The vertical blade splits the loom ahead of the pull while the cone shaped head
pilots the wire through the loom.
Part# SI-WSLT-1
Euro Radio Removal Set
•
•
•
•
•
VW
BMW
MBZ
Porsche
Ford (Euro)
•
•
•
•
•
Audi
Becker
Blaupunkt
Grundig
Universal “U”
• 18 pcs total
• Includes Canvas Case
Part# SI-URRS
22
Panel Removal Guides
Multi-year coverage for domestic & imported
cars, light trucks, vans, & SUVs
Part# SI-MIPRG-1
Part# SI-MIPRG-2
Model Years 1991-2007
Model Years 2007-2011
7 pc. Pry Set
•The Mobile Solutions Clandestine Pry Tools are designed for prying
applications on delicate vehicle surfaces.
•They are tough enough to pry, but not hard enough to damage.
•These tools are an essential item for anybody performing work on
dashboards, door and trim panels, or any sensitive vehicle surface.
Part# SI-PRY7
5 pc. Pry Set
•This an excellent set for any panel removal tasks, whether
dash or door panel related.
•They are strong, yet flexible enough not to damage any interior
surfaces that you will encounter.
Part# SI-4505
4 pc. Scraper Set
•Use these scraper tools instead a knife or blade, which will leave
marks or a cut groove in the material.
•All the scraping power with safety in mind so you don’t get cut.
Part# SI-SCR4
44 pc. Master Radio Removal Set
Telephone:
2: Radio Removal Keys
(Pioneer & JVC)
(Sony I before 2005)
(Panasonic)
(Kenwood I before 1998)
(Kenwood MASK)
(Clarion-New)
(Clarion (ALT)
(Panasonic 2006)
(Sony IDIC 2005)
®
2: Radio Removal U-Hooks
(Ford/VW/Audi/Grundig/Blaupunkt)
1: Special Pentagon Wrench
(BMW)
(VW/Audi/Becker/Mercedes-Benz)
(Mercedes-Benz/Porsche/Becker)
2: Radio Removal Keys: (VW)
1: Allen Hex Wrench (BMW/Opel)
2: Radio Removal U-Hooks
(New Blaupunkt)
(Mercedes-Benz/BMW)
(Kenwood II 1998-2001)
(Sony II after 2002)
(Kenwood III after 2002)
Specialty
Install Tools
Smart Templates
The MOTOR Interior Panel Removal Guides contain:
• Replacement procedures for interior door panels, instrument panels,
floor consoles, door handles & latches, and exterior mirrors • Exploded views show hidden fastener locations and type
• Air bag system precautions
Part# SI-8444
480-968-2074
23
®
Specialty
Install Tools
Smart Templates
Automatic Wire Stripper
•Automatically adjusts to wire size
•Cuts and strips solid or stranded 12-22 gauge wire
•Handles single or multiple conductor wire
•Easy to use - yields clean, nick-free results every time
•Not designed to strip Teflon or similar insulations
Part# SI-PICO390T
Klein Crimping Tool
•For insulated and non-insulated terminals and connectors
•Crimping die marked for insulated and non-insulated solderless
terminals and connectors
•Accommodates wire from No. 10 to 22 AWG
•Red plastic-dipped handles for comfort
•Length: 9-3/4” (248mm)
Part# SI-KLE1005
Wire Strippers
•26 - 8 AWG
•Strips: Duplex, Parallel, Thermostat, Communication Cable and
Primary Wire on the end or in the middle
Part# SI-SGT19000
Klein-Kurve Wire Strippers
•Strips and cuts solid and stranded wires 20 - 30 AWG solid and
22 - 32 AWG stranded Screw-shearing holes.
•Strong-gripping serrated nose; for easy bending, shaping, and
pulling of wire.
•Precision shear-type blades for clean cuts on solid and
stranded copper wire
•Coil spring provides fast self-opening action
Part# SI-KLE11055
Heavy Duty Hex Crimpers
•This is the Mercedes-Benz of crimp tools.
•Double compound action effortlessly exerts maximum force for fast,
reliable hexagonal crimp. That means equal pressure on all sides
of the connection.
•Crimps terminals and lugs 10ga. through 4/0ga.
•There’s even a chart right on the tool for selecting correct
die setting.
Part# SI-50101
8” Copper Cable Cutters
•There’s nothing worse than fighting a cut of large gauge copper wiring,
the next challenge is stripping the insulation.
•Your worries are over with these premium 8” copper cable cutters
and strippers.
•Cuts copper wire from 10ga. up to 3/0ga.
Part# SI-50103
24
6” Side Cutters
Part# SI-50160
Window Gasket Hook
•Use this for repositioning window sash trim after
reinstalling door panels or for bending the tabs of
a DIN mounting cage.
Part# SI-757
7 pc. Taper Drill Bit Set
•This high speed set includes 7 tapered bits with 7 matching
countersinks and 7 adjustable depth stop collars with Allen wrench.
•Bits are designed to follow the taper of screws to give you a good tight fit.
•Countersinks ensure a flush fit. For screw sizes #5, 6, 7, 8, 9, 10 and 12.
Drill sizes: 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64” and 7/32.
Part# SI-357-0023
Self-Centering 3pc. Bit Set
•Simply place bit in mounting hole, push down, and drill (these feature
a spring action design!).
•Drills a perfectly centered hole every time! You can also adjust the pilot
bit for various screw lengths.
•The 3-Piece set includes 5/64”, 7/64” and 9/64” bits.
Part# SI-400-1279
Drill holes perfectly
on center!
4 pc. Countersink Bit Set
Part# SI-365-9399
Countersink Set, 82º, 4 pcs
3 pc. Step Drill Bit Set
•This set has 2 bits that go to 1/2” (one in 1/32” increments and
the other in 1/16” increments) and another that goes to 3/4”.
®
•This is the last countersink bit set you will ever need to buy.
•This works equally well on wood, plastics and most metal compounds.
Specialty
Install Tools
Smart Templates
•These effortlessly cut wire below 8ga. in size and keep the fatigue on
your hands to a minimum.
•Great for the high current wires in remote starters or even large gauge
speaker wiring!
Part# SI-MTN7445
Telephone:
480-968-2074
25
®
Electronic
- Acoustic
Smart Templates
TPI Hand Held Digital Oscilloscope
•The TPI 440 is a 1MHz scope that has
a very familiar DMM user interface with
traditional shielded banana test leads.
•There is virtually no learning curve with
the TPI 440.
•It has an internal Ni-Mh battery with a
wall charger included.
Protective
Boot (Grey)
Nylon Carrying Case
Part# EA-TPICASE
Part# EA-TPIA403
Part# EA-TPIPKG
TPI 440 Portable Oscilloscope
Nylon Carrying Case
Complete TPI Scope Package
SAVE
10%
DMM/Scope Accessories
TPI A296: It’s a “Hall Effect” clamp that measures both AC and DC current up
to 2000 amperes accurately. It is self powered and plugs into any standard
DMM that measures millivolts (that’s how it displays its measurement safely).
To order, use Part# EA-A296
MS Test Lead Kit: This 12pc. kit has all the test leads you’ll need including
larger gauge wire piercing clips, large jaw alligator clips, backprobe pins for
probing Molex connectors, and much more. The test lead kit also comes with a
nice carrying pouch. To order, use Part# EA-TESTKIT
MS 20pc. Backpin
Test Clip Kit
MS 12pc. Test Lead Kit contains: (2) Standard Test Probes
(2) Silicon Back Probe Pins
(1) Storage Pouch
(2) Bed of Nails Clips
(2) Crocodile Clips
(2) Insulation Piercing Clips (2) 64” Test Leads
MS Backpin Test Clips - Small, sharp pins on one end and alligator clips
on the other end allow you to easily pierce insulation or Molex plugs w/ no
damage! 20pc. kit. To order, use Part# EA-THX490
S.a.
Made in U.
Portable RTAs
•These hand held RTAs are great for a number of common tasks with system tuning and OEM integration tasks. Built in microphone flips out easily.
•These are menu driven RTAs that also have a polarity check, signal
generator, and SPL meters. The XLR plugs on the bottom provide
input (up to 80 VAC) and output (generator) capabilities
•PAA-3 features a USB interface while PAA-2 is RS-232 (Serial Port)
Part# EA-PAA3
USB Interface RTA
PAA-3 includes USB cable,
charger, sortware and case.
PAA-2 includes Serial cable,
charger, software and case.
Part# EA-PAA2
RS-232 Interface RTA
(requires Serial-USB adaptor)
Cables / Adaptors
•USB to Serial RS-232 Adaptor
•Male XLR to Speaker Wire
•Use for TPI Scope or Phonic PAA-2 RTA •Use w/Phonic PAA-2/PAA-3 RTA
•Includes USB adapter and USB cable
•Bring speaker level signals to RTA
USB to Serial RS-232
Male XLR to Speaker Wire
Adaptor
Part# EA-TPI-USB
USB to Serial RS-232
Part# EA-XLR
Male XLR to Speaker Wire Adaptor
Phase Test Instrument PT9A
The protective
carrying case is
included!
PT9A with test leads, and
Test CD
26
Part# EA-TPI-440
Grey Rubber Boot for TPI 440
TPI A296
AC/DC
Current Clamp
The TPI 440 comes with standard
DMM test leads.
•The PT9A features a built-in microphone and comes with a test CD that
includes in phase and out of phase pulses (in addition to 11 other useful test
tracks).
•It has a built in pulse generator for both speaker level and preamp level
connections directly to a component (speaker, amplifier, signal processor, etc.).
•Comes with a protective carrying case and test leads.
Part# EA-PT9A
PT9A Kit (Incl. CD, case, probes)
Part# EA-PT9APK
Two PT9A Kits
SAVE
10%
Test CDs
Autosound 2000 CDs are a necessary weapon in your car audio tuning and
diagnostic aresenal. Each disc is designed to test a specific performance
parameter of a car audio system.
Part# EA-CDSET
Complete Set 101-105
Part# EA-CD104
CD-104 (Level Setting) Only
Battery / Charging System Analyzer
•Menu Driven, Intuitive Interface with Thermal Printer for test results .Sales people can even do it!
•Easy, color coded connection to the battery (temp sensors built in to jaws). Rugged ballistic case.
•Doesn’t require the car to first “go to sleep” like the MicroVAT or other analyzers. Immediate testing.
•Easy to understand results like: Replace Now, Replace Soon, or Continue to Use .
Part# EA-CHGA
Part# EA-CHGA-RP
Handheld Charging Sys Analyzer w/Printer
Thermal Printer plugs into
bottom of analyzer
Extra roll of thermal printer paper
Sample
Printout
Intuitive menu driven
controls
Printout
Opening
Ballistic
Nylon Case
Hand Held
Analyzer
All New Design!
C o m p l e t e M e a s u r e m e n t T o o l Pa c k a g e s
ESSENTIALS PACKAGE
•TPI 440 Package (scope, boot, case, standard probes)
•PAA-2 Portable RTA (incl. software, charger, case)
•(1) PT9A Phase Test Tool w/CD (incl. case & probes)
Part# EA-ESS-PKG
Essentials Tool Package
®
SAVE
10%
EXPERT PACKAGE
Everthing in the Essentials Package above plus several extras!
•A296 Hall Effect Clamp • 12pc. Automotive Test Probe Kit
•Second PT9A (2 total) • PAA-3 RTA instead of the PAA-2
Part# EA-EXP-PKG
Expert Measurement Tool Package
(Pictured at Right)
SAVE
10%
Telephone:
Electronic
- Acoustic
Smart Templates
• CD-101 - 99 tracks of 20-20kHz Sweeps, Low Hz Bursts, and Sine Waves
• CD-102 - 32 tracks of evaluating Stereo Imaging and Speaker Placement
• CD-103 - Recorded by Sheffield Labs: Learn Vocals, Soundstage, Distortion, etc.
• CD-104 - The “must have” for level setting amp and processor gains over 6 frequencies
• CD-105 - Use as a demonstration disc or for learning about sonic attributes in a system
The Mobile Solutions EXPERT Measurement Tool Package is complete with
everything a technician needs to tackle OEM integration jobs, tune and adjust
aftermarket systems and troubleshoot any number of audio related issues.
480-968-2074
27
Plastic Drill Bits
•This specialty 8pc drill bit set is made exclusively for plastics
•Won’t chip or shatter the plastic as it drills the hole
•Sharp tip keeps the bits from “walking” on the plastic
•Sizes - 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16” & 1/2”
Part# PF-110-6641
8pc Drill Bit Set for Plastics
•Remove hazing and sanding scratches from acrylic plastics
with this 4” buffing wheel.
•Use the separate 1/4” shaft arbor adapter to attach the
buffing wheel to an air die grinder for the best hand held
buffing tool.
•Use the White and Blue rouge buffing compounds.
®
Plastic
Smart Templates
Fabrication
8pc Drill Bit Set
Part# PF-110-6019
Part# PF-110-6053
1/4 Shaft Arbor Adapter
Buffing Wheels & Compounds
8 inch wheel
6 inch wheel
•The 6” buffing wheel features a loose 40 ply cotton construction with
stitching around the arbor hole, but with a looser construction toward
the outer edge.
• The 8” buffing wheel is exactly like the 6” buffing wheel, only it’s totally
different.
•We recommend using a buffing motor with a 1750 RPM speed.
Compounds:
•Use Blue for buffing after sanding the edges of your acrylic plastics.
•Use the White for final polishing to leave a nice finish on the edges
• Use the Red for buffing aluminum after sanding through 600 grit wet.
Part# PF-110-6758
Part# PF-110-6757
Part# PF-110-6759
Part# PF-110-6756
Part# PF-110-PKG1
Part# PF-110-6755
6” Buffing Wheel, 5/8” Arbor
Red
(Not Shown)
White
8” Buffing Wheel, 5/8” Arbor
6 and 8” Buffing Wheel Package
White Buffing Compound, 2lb.
Blue Buffing Compound, 2lb.
Red Buffing Compound, 2lb.
Blue
For the best buffing and
polishing results, don’t skimp
on the sanding process (both
dry and wet sanding)!
Buffing wheels free of “glazed” on buffing compound. Use a 1750RPM
motor (bench grinders are 3250 and can burn the acrylic).Use gentle
pressure. Let the compound do the work. Alternate directions.
For small parts, use a die grinder with the 4” Buffing
Wheel Kit. Apply compound liberally and often to
avoid burning any edges. Be sure to buff on a sturdy
surface or work table to be consistent with pressure.
Plastic Cleaners
•The plastic cleaner offers excellent non volatile, low static cleaning
for acrylic plastics (8oz. pump spray bottle).
•The plastic polish is used for detailing the acrylic after buffing.
•Leaves a beautiful high gloss that enhances any acrylic accent piece.
Part# PF-110-6021
Plastic Cleaner, 8oz. Pump Spray
Part# PF-110-6377
Plastic Polish, 8oz .Pump Spray
Part# PF-110-6018
Plastic Cleaner, 1 Gallon Refill
28
Cyanoacrylate Adhesives
Part# AD-2P-10SAA
Part# AD-2P-10M
Part# AD-2P-10ACT
Part# AD-2P-10T
Activator for CA Glue, 12oz.
Aerosol
Medium Viscosity CA Glue
(Watery)
Activator for CA Glue, 2oz. Pump
Thick Viscosity CA Glue (Like
Syrup)
Part# AD-2P-10DB
Part# AD-2P-10J
Debonder for CA Glue, 2oz. Pump
Gel CA Glue (Thickest Viscosity)
Part# AD-2P-10TIP
Micro-Tips (25pc)
Part# AD-2P-10KIT
Part# AD-2P-10CAP
Adhesive Sample Kit (6) 2oz.
Bottles
Pin Caps (5pc)
Plastic Adhesives
•Use Weld-On (water consistency) acrylic cement for joining acrylic
plastics, particularly when laminating multiple colored plastics together.
•Sold in a 4oz. can.
•If you are bonding ABS plastic to itself or bonding other styrene
and polycarbonate type plastics to themselves, use Weld-On #2354.
•If you are bonding clear acrylic, you need to use Weld-On 16 because it
dries clear. Syrup consistency and sold in a 5oz tube.
Weld-On No. 3
Weld-On No. 16
Weld-On ABS
No. 2354
Part# PF-10799
Kent Epoxies
Weld-On No.3, 4oz
2-PART EPOXY
2oz. Applicator for Weld-On #3
(Not shown)
Part# PF-830232
Weld-On ABS No.2354, 5oz
Part# PF-110-6033
Weld-On No.16, 5oz Tube
•Use Kent 2-Part White Automotive
Epoxy for bonding metal, plastics,
SMC, and fiberglass to each other.
It’s the best! Ready to sand and
paint within an hour.
•Sold in two 8oz. tubes.
Part# AD-20250
CHEM-WELD 1
•Is ideal for flexible plastics,
especially interior panels
that will move with daily driving.
•Sand and paint in 30 min.
•Sold in two 8oz. tubes.
®
Part# PF-110-6109
Smart
Adhesives
Templates
Adhesives:
•Mobile Solutions’ Instant CA Adhesive in 8 oz. bottles are
the ultimate industrial grade fabrication adhesives!
•For the fabricator who requires a bit more adhesive than
1 oz., these bottles are the perfect solution!
•The formula is an industrial grade Cyanoacrylate adhesive,
not the “hobby grade” that most fabricators are using.
•Viscosity is available in Medium, Thick, and Gel (which is
thick enough to not to drip even when used upside down!).
Activator:
Our unique industrial grade 2P-10 activator is a two-part,
10 second bond accelerator. Just apply the adhesive to one side,
then spray the activator on the other side and stick it together for a strong
permanent bond. Since it’s packaged in a 12 oz. aerosol can, it is ideal
for the fast pace of a fabrication environment where the contents
will be used up quickly. Our Cyanoacrylate 2oz debonder
is also available for removing glue residue.
Part# AD-10555
Kent Plast RPR Chem Weld Kit 1
Kent 2-Part Epoxy, (2) 8oz. Tubes
Telephone:
480-968-2074
29
2 Sided Tape
2 Sided Template
Tape
2 Sided Foam Tape
®
Adhesives
Smart
Templates
Part# AD-P34000
Part# AD-TDST5
Part# AD-P40519
Part# AD-TDST1
2-Sided Foam Tape 1/4” x 50 ft.
2-Sided Foam Tape 1/2” x 50 ft.
2-Sided Template Tape 1/2” x 100 ft.
2-Sided Template Tape 1” x 100 ft.
Part# AD-P40521
2-Sided Foam Tape 1” x 50 ft.
H o w T o U s e 2 - S i d e d Ta p e o n T e m p l at e s
Step 1: Trace and rough cut desired shape onto
your material. Rough cutting saves router bits!
Step 2: Apply template tape to all sides of the area
to be trimmed flush with router. Peel backing away
from template tape.
Step 3: Position Smart Template jig carefully on
material. Press down firmly! Trim flush with Mobile
Solutions ½” Flush Trim or ¼” Spiral Flush Trim bit.
Step 4: Use 5 in 1 tool to peel Smart Template jig
away from material. There’s your finished piece!
Step 1
Step 3
Step 4
Step 2
Dry Laminating Film
•Our Dry Laminating Film is an optically clear film that is sticky
on both sides, though you’d never know it while looking through it.
•The film backing peels off to allow adhesion to a clear substrate
(like acrylic) so that your logo can
appear “cast” in the plastic.
•Available in 9x12” sheets which
serve most needs for small dry
laminating, but if you need larger
single sheet quantities please give us a call!
Part# AD-CLF912
Clear Dry Laminating Film (9” x 12” Sheet)
How To Use Dry L aminating Film
The question we hear most often about this stuff is “what the heck is laminating film?” Laminating film is one of the “tricks of the trade”
used in getting logos or system designs into your installations. In this “How To” feature, we briefly describe how to laminate a printed
graphic to a piece of acrylic. You can really laminate just about anything that needs identity and that can be printed on a basic ink-jet
style printer. Laminating as we demonstrate it here is an essential component to creating brand awareness for your shop!
Begin with the printed graphic (sized
larger than your acrylic), the polished
acrylic, and the film. You will also need
a razor knife, a squeegee and some
plastic cleaner in a spray bottle
30
2 Sided Foam Tape:
•The compression foam tape is used for both temporary and
permanent adhesion of parts that need to maintain a vapor channel
so that moisture will not trap under the surface.
2 Sided Template Tape:
•The 2-sided template tape has an extremely aggressive tack for
placing templates together, but because it’s thinner than most tapes
you won’t have any sliding of the template while pushing it into the
bearing on the router bit.
After cleaning thoroughly, spray the
acrylic with plastic cleaner, then peel
& stick one side of the film. Use the
squeegee to push the liquid out.
After drying it thoroughly, peel the other
side and stick the acrylic to your print.
Once it’s stuck down, push the air
bubbles out with a hard card and then
trim with a razor knife!
Kent Poly Prep
Kent Acrysol
•Kent Acrysol is great for
removing various adhesive
residue or
other epoxy clean up before it
has dried.
•This is a gentle chemical wash
that will (in most cases) not
harm the surface of your part.
Part# AD-10559
Kent Poly Prep Mild Solvent
Part# AD-60170
Kent Acrysol Solvent
Guide Coat
MS Upholstery Adhesive
•Made for Mobile Solutions by
Weldwood, this is the most reliable
upholstery glue in the business.
It’s what we use in all of our
fabrication training classes and
we know that when correctly applied,
this will never lift or release
from the surfaces to which it’s
applied. Don’t waste your time
with substandard upholstery glue!
•Not available for sale to customers
in California, unfortunately.
•Powdered Guide Coat provides a
visual guide to highlight low spots and
imperfections during surface preparation.
This product is suitable for use with both
wet and dry sanding methods. Black
in color. Not the same as black spray
paint because it sands more evenly
and has more of a powder spray!
Part# AD-100-721
Aerosol Spray Can (Black)
Part# UP-MSWA-1G
MS Landau Top and Trim Upholstery Adhesive (1 Gallon)
Polyester High Build Primer/Surfacer
A two-component polyester primer surface that is fully compliant with both National and California regulations for maximum allowable
VOC’s. The Mobile Solutions Polyester Primer is a high build primer surfacer with exceptional build and level capabilities.
•
•
•
•
•
High Build, No Shrinkage Cross-Link Cure
Excellent Flow and Leveling
Sands Easily
Approximately 60 min Dry to Sand Time
Sold in 1 Gallon Containers
Use the MS Polyester Surface Primer to prepare any
fiberglass or composite surfaces for final finishes,
whether painting or upholstered. The surfacing properties
of the primer allows you to achieve a consistent finish
and fix any minor low/high spots BEFORE you move on
to the final surface finish.
Part# AD-MSSP-1
Polyester Surface Primer (1 Gallon)
The Glü-Bot
Blade Tip
•The Glü-Bot from Mobile Solutions is the ONLY wood glue bottle that
will not drip or spill.
•You never have to clean up glue spills or drips again.
•The easy-squeeze Glü-Bot will put the glue where
you want it... and only where you want it.
Part# AD-GLU-BOT
Part# AD-TRI-BLADE
Part# AD-BAB-BOT
Part# AD-TRI-ROUND
Glü-Bot, 16oz.
Rounded Tip
4 oz. Baby GLÜBOT
®
16 oz. GLÜ-BOT
Baby Glü-Bot, 4oz.
Telephone:
Surface
Smart Prep/Adhesion
Templates
•Use as an adhesion promoter for
any of the Kent Epoxy products
where you need to make sure
that the bond between plastics
and your fabricated parts
will “take”.
Blade Tips, 5 per pack
Rounded Tips, 5 per pack
480-968-2074
31
Steinel Heat Guns
®
Upholstery
Smart Templates
Supplies
These are the Mercedes-Benz of heat guns. Once you experience a Steinel you will ask yourself why you waited! There are several
Steinel models from which to choose, all of which have multiple temperature adjustments to accommodate everything from heat
shrink tubing to stretching vinyl to plastic welding!
•The 2310 LCD Intellitemp heat gun has a variable
digital temperature control panel that maintains the
displayed temperature within 5%. 3 presets available.
The 34876 kit includes various tips, case and plastic
welding rods.
•The 1810 S is a value priced three stage
temperature controlled heat gun from Steinel.
Temp settings are 120ºF, 750ºF and 1100ºF.
•The 1750 is a five temperature heat gun with
trigger inserts that hold the range (200-1200ºF).
Output is 1750 watts @ up to 23 CFM
2310 LCD
Plastic Weld Kit
(comes with 2310 LCD and all
attachments shown).
Part# UP-2310LCD
Steinel 2310 Intellitemp Heat Gun w/Presets
Part# UP-34876
Steinel Plastic Weld Kit w/ 2310 & Tips
Part# UP-HL1810S
Steinel 1810 3 Stage Heat Gun
1750
Part# UP-1750
Steinel 1750 Trigger Insert 5 Temp Heat Gun
1810 S
HVLP Spray Gun Kit
•One spray gun with a 1.0mm needle and nozzle set for finishing and touch
up work. Includes a smaller paint cup for easy clean up on smaller jobs.
• A second spray gun with a 1.4mm needle and nozzle set for lighter materials
such as high quality base coats and clear coats
• A third spray gun with a 1.7mm needle and nozzle set for heavier materials
such a primers, spray fillers, and upholstery adhesives.
• Kit also includes a locking pressure regulator with needle gauge and two large
volume paint cups for the 1.4mm and 1.7mm spray guns.
Part # UP-HVLP
HVLP 3 Spray Gun Kit
Flocking - Spray Fibers
Color
Flocking
Adhesive
497-1741 Red
3oz.
497-1731 Red
8oz.
497-1742 Kelly Green
3oz.
497-1732 Kelly Green
8oz.
497-1743 Medium Blue
3oz.
497-1733 Medium Blue
8oz.
497-1744 Wine
3oz.
497-1734 Wine
8oz.
Additional Air Canister (each)
497-1745 Black
3oz.
497-1735 Black
8oz.
Also Available:
497-1746 Brown
3oz.
497-1736 Brown
8oz.
Flocking has the appearance and feel of felt and is a great way to finish glove
boxes, center consoles, or subwoofer ports. Fade resistant and easy to use!
Simply apply undercoat adhesive with a brush or roller, dispense matching
color fibers in the Air Assist Canister with our Flocker Gun and allow to dry.
Three (3) ounces of flocking fiber and eight (8) ounces of adhesive cover
12-15 sq. ft. Flocker Gun comes with one air canister and extra canisters for
additional colors are available separately. Use only one canister for each color.
Part # UP-497-1712
Spray Flocking Gun
w/ 1 Air Canister
UP-497-1712 Gun
w/ 1 Canister
Part # UP-497-1713
Part # UP-497-1710
Mini Flocking Gun - Plunger Type, Non- Pneumatic (Not Shown)
3
32
2
Mold Release WAX
PVA
•Partall® Paste #2 from Rexco is a
polishing compound produced
from a combination of hydrocarbon
and microcrystalline waxes.
•It is particularly recommended as
a primer coat to create a smooth,
compatible mold surface or it can be
used as a general parting agent
for day-to-day molding done with
fiberglass parts.
Part# FP-PVA-1G
Partall #2 Paste, 24oz.
Part# FP-FMR-QT
VA 1 Quart Bottle
Part# FP-PVA-1Q
PVA 1 Gallon Bottle
Fiberglass Mat
Resin Pigment
•Pigments come in 2oz.
jars as a viscous liquid.
•They are compatible with
all polyester, vinylester
and epoxy resins as
well as gelcoats.
Part# FP-FBL-PG
Resin Pigment, 2oz, BLACK
•1-1/2 oz. fiberglass mat excellent for
building subwoofer enclosures and
trim panels
•Our mat builds strength very
quickly, three or four layers
= 1/4 “ thickness
•Most commonly used mat for
mold and boat building
applications as well as
automotive part construction
Part# FP-MAT per Yard
Fumed Silica
Fiberglass Cloth
•Makes resin thixotropic,
without increasing viscosity
•Controls sag and allows
work on overhead surfaces
•Can create non-sag putty
•Increases the hardness
of resin
•6oz fiberglass cloth
•Lightweight cloth is good
for most light duty applications
•Used commonly for a top layer
in combination with fiberglass
mat.
•Adds strength and helps
keep a unformed surface
Part# FP-SILICA
Fumed Silica
Part# FP-CLOTH per Yard
Urethane Foam Kit
1/8” Chopped Strand
•Makes resin easy to work with
•Excellent for tight corners and
difficult contours, before adding
fiberglass mat
•Reduce cost of resin mixture,
strengthen bond properties
•Improve abrasion
resistance
®
•A rigid 2 lb. density polyurethane
foam that expands up to 30 times
its original liquid volume
•Just mix equal parts of the
resin and hardener and pour
into an enclosed area, leaving
plenty of room for expansion.
•It comes in two equal parts:
Part A-Resin and Part B-Catalyst
(hardener).
•Ideal for shaping irregular shapes
and contours.
Fiberglass
Smart Templates
products
•PVA is a water-soluble liquid to
apply over Partall Mold Release
Paste.
•Spray PVA on a mold that has
been treated with Mold Release
Paste
to achieve a smooth gloss finish.
•It can be used with polyester
and epoxy resins.
•Remove PVA from the casting or
mold by washing in clear water.
Part# FP-CHOP
1/8: Chopped Strand
Part# FP-POLYFOAM
Urethane Foam Kit
Telephone:
480-968-2074
33
Fiberglass Resin
Part# FP-TRESIN-1G
Tooling Resin (1 gallon bottle)
Grape Scented Styrene Mask
®
Fiberglass
Smart Templates
products
•Formulated for making molds or parts that require higher
physical properties.
•Low shrinkage, high heat distortion temperature and improved
resistance to many chemicals.
•Available in one gallon containers.
•Requires MEKP Catalyst (hardener) which is sold separately.
34
•Add 2% by volume to the polyester resin.
•Reduces the offensive odor of catalyzing resin.
•Available in quarts.
Part# FP-MASK-G
Grape Mask
Clear Casting Resin/MEKP Hardener
•It’s a liquid plastic. Easy-to-use, water-clear polyester resin.
•Embed and encapsulate Aluminum, other plastics and metal
•Add Transparent Dyes or Opaque Pigments to color resin.
•Available in gallon containers
•Requires MEKP Catalyst (hardener) which is sold separately
Part# FP-CASTRESIN
Clear-Lite Casting Resin “Liquid Plastic”
Part# FP-MEKP160
MEKP Hardener
Resin Mixing Chart
Note: All of the materials listed on this and the previous page, can be shipped to addresses within the 48 contiguous United States via Fedex Ground Service. All
require packaging, labeling, handling and shipping precautions. Items are subject to a $20.00 hazardous materials fee. We will advise you of the best way to ship
your order and notify you before shipment of any packaging or shipping fees that may be applicable to a specific order.
Resin by Volume
Volume = OZ
mL / CC
2 oz
60
4 oz
120
6 oz
180
8 oz
240
10 oz
300
12 oz
360
14 oz
420
16 oz (Pint)
480
18 oz
540
20.3 oz
600
32 Oz (Quart)
960
40 Oz
1200
48 Oz
1440
56 Oz
1680
64 Oz (1/2 Gal.)
1920
Outside Temperature (F)
Estimated cure time
If room temperature
Est. cure time @ room temp
0.50%
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
2.7
3.0
4.8
6.0
7.2
8.4
9.6
MEKP by Volume (in mL / CCs)
0.75%
1.00%
1.50%
0.5
0.6
0.9
0.9
1.2
1.8
1.4
1.8
2.7
1.8
2.4
3.6
2.3
3.0
4.5
2.7
3.6
5.4
3.2
4.2
6.3
3.6
4.8
7.2
4.1
5.4
8.1
4.5
6.0
9.0
7.2
9.6
14.4
9.0
12.0
18.0
10.8
14.4
21.6
12.6
16.8
25.2
14.4
19.2
28.8
@ 98° & up @ 88°
@ 78°
@ 73°
2 Hours
2 Hours 2 Hours 2 Hours
@ 73°
@ 73°
@ 73°
@ 73°
5 Hours
3.5 Hours 2 Hours 1.5 Hours
2.00%
1.2
2.4
3.6
4.8
6.0
7.2
8.4
9.6
10.8
12.0
19.2
24.0
28.8
33.6
38.4
@ 68°
2 Hours
@ 73°
45 Min
10” Fiberglass Shears
Roller Tools
Part# FP-FBR-13
Barrel Roller Tool
Part# FP-SHEARS
Part# FP-FGR-13
Conical (Wheel) Roller Tool
Part# FP-FRP-13
Cylinder Roller Tool.
MEKP Dispensers
Latex Gloves
Deluxe MEKP Dispenser:
•Is a 500 ml. plastic bottle with
a measuring cup attached.
When squeezed, the cup to
preset level.
•The measuring range is from
1 to 25 ml...
Standard MEKP Dispenser:
•This is not the 16 oz. Pint
size, but rather a 50%
larger version!
•These come 100 to a box. We sell the Medium,
Large, and Extra Large sizes so please specify when
ordering. They are not intended for medical use, so
no “surgical procedures” please!
Part# FP-GLVMD
100ct. Medium Gloves
Part# FP-GLVXL
100ct. Extra Large Gloves
Part# FP-GLVLG
100ct. Large Gloves
Part# FP-FD-MEKP
Deluxe MEKP Dispenser
Part# FP-F-MEKP
Deluxe
Dispenser
Standard MEKP Dispenser
Standard
Dispenser
Mixing Cups & Sticks
Disposable Brushes
•These disposable brushes with sturdy wood handles
are an economical way to lay up resin on your fiberglass
cloth or mat without having to bother with cleaning up
the brush later.
•These are 2” wide and come 36 to a box.
•Quart and two quart plastic
cups with the markings
on the sides In both
standard and metric
volumes.
Part# FP-CHIPBR
Part# FP-CUP1
2” Brushes, Pkg. of 36
1 Pint Cups
Part# FP-CHIPEA
Part# FP-CUP2
2” Brushes,
1 Quart Cups
Part# FP-STIX
®
Extreme Subwoofer Enclosures
25 per PKG.
Fiberglass
Smart Templates
products
•These metal shears can take the abuse of acetone
when you need to clean them from trimming away
excess wet fiberglass mat or cloth.
•A must for the serious fabricator.
These roller tools feature top
quality wood handles with
precision aluminum rollers.
Telephone:
480-968-2074
35
•This is the best “painters tape” for all the fabrication tasks
you do where you need good adhesion but no residue when
you peel the tape off.
•It conforms well to curves and withstands temperatures
to 250º F for 30 minutes, which is perfect for fiberglass work!
•It’s also moisture and solvent resistant.
•Sold in 1/4”, 1/2” 1” & 2” wide x 60 yard rolls.
36
FP-3M-TAPE-G20
FP-3M-TAPE-G50
FP-3M-TAPE-G10
FP-3M-TAPE-G25
3M 233+ Green Tape, 2”x 60yd.
®
Fiberglass
Smart Templates
products
3M 233+ Green Tape
3M 233+ Green Tape, 1 ”x 60yd.
3M 233+ Green Tape, 1/4”x 60yd.
Plastic Spreaders
Molding Foam
•These closed cell molding foam blocks can easily be
cut with a knife or hacksaw blade to add a unique shape
to a panel or fabricated part.
•It’s much lighter and faster than building up layers of
body filler and once you have the shape, you can
fiberglass over it to create a plug for subsequent parts.
•Use Weldwood upholstery glue (or similar) to glue several
blocks together if you need bigger dimensions.
•Sold in packages of 6, each block measures 8” x 4” x 2.75”.
3M 233+ Green Tape, 1/2”x 60yd.
•Designed for spreading
body and fiberglass fillers,
finishing putties, and
resins.
•Flexible.
•Easy to clean.
•Cured filler pops off easily.
Part# FP-4526
4” Plastic Spreaders 12 pkg.
Part# FP-FOAM
Part# FP-4528
6” Plastic Spreaders 12 pkg.
Quick Mix Sheets
Molding Foam, 6 pcs.
•Mix on top sheet, then remove
for next mixing
•100 disposable non-porous
sheets padded
•Masonite board with strap
on back for easy holding
•No cleaning required
•12” x 12” Disposable Sheets
Part# FP-QMIX
Quick Mix Sheets
Fiberglass Fillers
Kitty Hair:
•Formulated with long strands of chopped
fiberglass. Can be used with or without
fiberglass cloth or mat.
•Blue cream hardener included.
Rage Gold Body Filler:
•Premium light-weight formula w/ the finest
resin available. Tack free & stain resistant,
superior sandability.
•Blue cream hardener included.
Duraglas:
Part# FP-869
•Combines resin and chopped fiberglass.
Kitty Hair Long Strand
•Can also be used with fiberglass cloth
Fiberglass Reinforced
to cover large holes.
•White cream hardener included.
Part# FP-112
Rage Premium Light Weight
Filler
Part# FP-CHARD
Cream Hardener (Blue or White)
Part# FP-24030
USC Duraglas Fiberglass
Body Filler
Pro Carpenter Measuring Tapes
Part# MC-PSSR
Part# MC-PMS
Part# MC-PSSP
Part# MC-LIMP
16’ Green “Lefty/Righty” Tape
16’ Orange Story Pole Tape
16’ Yellow Metric+SAE Tape
Part# MC-CENTER
“Flat back”
16’ Self Centering Tape
16’ Gray Flat Back Tape
Lefty/Righty
Metric/Standard
Story Pole
Self Centering
Profile Transfer Wheel kit
4 different profile transfer wheel fittings and a spring
loaded tracing pencil tool
•This one-of-a-kind tool was designed to
overcome difficulties in copying profiles.
•It comes with three different sizes of
interchangeable tracing wheels which hold
your pencil stable at its center and follow
along almost any surface, keeping it at a
constant distance, ensuring an accurate
copy every time.
•The pencil is also spring loaded so that it
will remain in constant contact with your
work piece whether it is flat or upright
Part# MC-424-3414
AccuScribe Pro
Includes
pencil
sharpener
AccuScribe PRO
Part# MC-ACCU
Point-2-Point
Point-2-Point
•Mark multiple points quickly, accurately, and easily with this handy tool.
•Takes the frustration out of prep work for drilling and countersinking
holes in acrylic. Made of stainless steel, extends up to 2 feet.
Part# MC-424-3410
®
•The AccuScribe makes it easy to maintain
a consistent scribe offset, staying parallel
to the object surface every time.
•It is ideal for copying lines for false trunk
floors, unique arcs or radiuses, or virtually
any other curvy line you want to transfer.
•An adjustable grip locks your standard-size
pencil in place.
Follow curves and mark identical lines!
Make curvy insert panel templates easily.
Ideal for copying trunk floors!
Measure
Smart- Copy
Templates
- Position
•Pro Carpenter tape measures have built in pads and metric and
standard measurements identifying increments down to the
1/16” and millimeter.
•The unique “story pole” layout makes it easy to transfer lines
simply by marking the tape.
Mark evenly spaced points on any line!
Use for hardware, accent lines, braces, etc.
Telephone:
480-968-2074
37
•This patented protractor lets you measure the degree of outward
or inward angles, angles less than 90° and sloped angles.
•The brass knob allows you to lock measurements in place to
easily transfer angles or bevels.
•An excellent measurement tool for all custom fabricators.
Part# MC-424-3405
38
Patented
Center Finder Ruler
•The zero is in the middle with scales in 1/32“ on either side.
•The rule is placed on the object so that the readings at both ends
are the same.
•These rulers have a second scale which allows them to be used
as regular rulers too.
®
Measure
Smart- Copy
Templates
- Position
20” Multi-Purpose Protractor
Part# MC-301-3024
24 “ Center Finder Ruler
Part# MC-301-3048
48 “ Center Finder Ruler
Flexible Curve
•This 25” flexible curve is used to draw or duplicate any shape easily.
•The 1/4” square “snake” will conform and hold almost any curve
for long periods.
•No longer are complex panel curves hard to copy.
Part# MC-616-2025
Steel Contour Gauge
•This gauge is capable of reproducing shapes of objects 12” in length
and over 4” in depth.
•The polished steel pins are 6” long.
•Great for pulling contours off of dashes or hard to reach spots.
Part# MC-616-1212
Adjustable Curves
•These flexible drawing instruments, formed of interlocking
layers of butyrate plastic, can be finger-shaped to the desired
curve and then taped to wood or plastic to form a unique shape
for trim panels.
•They are held in position by friction and can be used over
and over again for years and still keep their smooth ruling edge.
•Available in 24”, 36”, 48” and 60” lengths.
Part# MC-AAC24
Part# MC-AAC48
Part# MC-AAC36
Part# MC-AAC60
24” Adjustable Curve
Use 2 sided tape to attach the curve to
a panel and rough cut the shape.
Flush trim on a router table.
Build beautiful curves into panels, insert and accent pieces with the
flexible curves from Mobile Solutions.
The curves easily hold their shape
when taped on top with masking
tape and then transfer easily to a
substrate with 2-sided tape for easy
routering to make a template.
Now you have a perfect edge.
Use as a template for other parts.
Lay out entire panels
with unique curved lines!
3 pc. Caliper set
Part# MC-303-1212
Inside/Outside Calipers
Inside Caliper
These digital calipers feature chrome finished alloy jaws and a large LCD
display. They offer three choices of read out: inch, metric, and fraction.
Measuring range is from 0-8” that is accurate to within 0.01”
• Spring Loaded Travel
• Easy Move / Lock System
• Alloy Jaw, Chrome Finish • Replaceable Battery
Part# MC-35-ID8
Insider Caliper
Outside Caliper
Part# MC-35-OD8
Outside Caliper
Digital Electronic Calipers
•Mobile Solutions Digital Electronic Calipers in 6” or 12” sizes are fast,
accurate, and easy to read. New version has even larger digital display!
•At a touch of a button, the LCD readout shows the entire measurement
in either inches or centimeters from 0.001” to 6” or 12”.
•Each features a stainless steel beam. Battery included.
Part# MC-6DC
6” Digital Electronic Caliper
Part# MC-12DC
12” Digital Electronic Caliper
Among other things, use calipers to measure vinyl
thickness and accurately account for the tolerance in
your fabrication projects!
Digital Level
Digital Protractor
12” (30cm)
Easy to read LCD digital level. The display even flips
over with the level so it always reads right side up. CNC
machined aluminum body. Accurate to + or - 0.1 degree
with a resolution of 0.05 degrees. Includes 9V battery.
• Red cross-hair laser for pin point accuracy
• Measurement in degrees or percentage of slope
• Magnetic bottom that will hold to metal surfaces
Part# MC-424-0112
Part# MC-424-0109
Complete Digital Package
All of our Digital Measure Copy Position products in one convenient package.
The package includes the 12” Digital Electronic Calipers (shown above), Inside
and Outside Digital Calipers (shown above), Digital Protractor (shown above),
Digital Level (shown above), and Magnetic Digital Angle Finder (Part # MF-4240130, shown on page 15)
Part# MC-DIG-PKG1
Telephone:
480-968-2074
®
•Measure range: 0-360°, Resolution: 0.05°, Accuracy: ±0.2°
Repeatability: 0.05°, Battery: 3V CR2032 included
• This digital protractor allows you to precisely set angles in the
horizontal plane. 12” (30cm) ruler on both sides (16th, 32nd & 64ths).
•Reversible digital display always displays “UP” correctly.
•Measuring 3” from pivot to end, works great to set miter gauges,
bandsaws, drill presses, table saws, etc.
Measure
Smart- Copy
Templates
- Position
•With the baked-on black powder coating, these calipers have a
silky smooth finish and are virtually rust-proof. The set of 3
includes divider with a pencil holder, outside and inside calipers.
39
Sanding pads
Soft Sanders™
•The package of 6 foam blocks
includes unique shapes in 3
different densities for maximum
coverage on all of your fabrication
applications.
Part# SN-0701
®
Sanding
Smart Templates
Products
Soft Sander Foam Contours (6 pcs)
•Choose from single density or
dual density pads.
•Single density is available in
Small (5” x 2 1/2”, x 1/2”)
Large (8 3/4” x 2 3/4” x 5/8”).
•Dual density is one size only
(5” x 2 1/2”, x 1/2”).
Part# SN-525
Single Density Sanding Pad
(Small)
Block Sanders
•These will wash up without
deterioration of the rubber, which
makes them ideal for wet
sanding or color sanding clear
coat paint work.
•Available in a 5” (Small) version
and a 9” (Large) version.
Part# SN-521
5” Blue Block Sander
Part# SN-522
9” Blue Block Sander
Teardrop Sanders
•No more sore fingers from those
tight, hard to reach places.
•The Teardrop sander can be used
to sand in tight curves, inside
corners of all angles, and almost any
other hard to reach area.
•Available in 2 1/2” (Small) and 5 1/2”
(Large) lengths, diameter is
approximately 1 1/2”.
Part# SN-524
Teardrop Sander (Small)
Part# SN-523
Teardrop Sander (Large)
D/A Palm Sander
High powered, super light weight, orbital palm sander.
Features include a compact light weight motor, built in
speed regulator, and sealed bearings for extended life. The
compact size and low vibration design help reduce operator
fatigue, while the orbital action assures a swirl free final finish.
Includes a unique 29 degree tapered edge pad that offers
excellent flexibility for ultimate control.
• 6” pad size
• 1.5 lbs total weight
• 10,000 rpm free speed
• 5.5 cfm air consumption @90 psi
Part# SN-3022-S
Part# SN-535
Single Density Sanding Pad
(Large)
Part# SN-526
Dual Density Sanding Pad
(Small)
Round Hand Sanders
•These round rubber sanders
are perfect for any hand sanding
job where you need to move
from flat to curved surfaces
without worry of “gouging”
the transition with a
sanding block edge.
•The round sanders are available
in 3”, 5” and 6” sizes.
Part# SN-536
3” Round Hand Sander
Part# SN-538
Part# SN-537
Curve-a-Flex Sander
•Works with regular or PSA sandpaper.
•Washes up without deterioration of the rubber, which
also makes it ideal for wet sanding applications
too (5” Length and 2” Diameter).
•Ideal for inside radius sanding
Part# SN-52
Curve-a-Flex Sander
Sand Devil Sander
•This clever sanding block turns a long lasting 3” x 21”
sanding belt into the finest hand sander you will ever use!
•The “clever lever” design makes belt changes fast
and easy while holding the belt tight and flat
without wrinkling.
•Sander Block Kit includes block plus one
sanding belt of each of the following: 60, 80 100,
120 and 150 grit.
Part# SN-571-0525
Sand Devil Sanding Kit
6” Finishing Palm Sander
40
Mobile Solutions is proud to announce that we are now a Master Distributor for StrongHand Tools, manufacturer of the BuildPro™
Welding Tables. We introduced the BuildPro Welding Table to attendees of our Master Tech Boot Camp and they were simply blown
away with the capabilities. The table has a large “field” of work areas separated by gaps for common clamps, but there are also
multiple locations for BuildPro’s own clamping jigs to allow you the flexibility of creating a repeatable jig for your designs without all the
homemade brackets and shims common with creating and welding custom parts. Truly the coolest thing in welding fabrication today! BuildPro 6’ Welding Table
The very practical, modular design of the BuildPro™ Table makes it easy to
set-up and tear down for the job at hand, big or small. Save time and money
by holding, positioning, and locating quickly and easily with a wide variety of
BuildPro clamps and accessories (available separately by contacting Mobile
Solutions for details)
Dimensions:
BuildPro 6’ Welding
Table
Width of Table =
Length of Table = Height (w Legs) = Part# MF-57-838
6 Foot Modular Welding Table
These are just some of
the clamp and fixturing
options available!
38”
78”
30”
(Additional shipping & handling to the 48 contiguous US states.) Note: Call for rates to
Hawaii, Alaska, and International.
Contact Mobile Solutions for more detail on the variety of clamps and accessories made
specficially for these welding tables!
BuildPro Jr. 4’ Welding Table
The Build Pro Jr. Welding Table is the perfect solution for metal fabrication
rooms that are not large enough to accommodate the full 6’ table. The Jr. Table
features the exact same materials, layout, and build quality of the full size table
in a 4’ version. All of the same accessories for clamps, fixturing, etc fit the Jr.
table just like the full size table.
Dimensions:
Width of Table =
Length of Table = Height (w Legs) = Part# MF-54-738
4 Foot Modular Welding Table
BuildPro 4’ Welding
Table
47”
46”
30”
BuildPro “Half” Welding Table
The Build Pro “Half” Welding Table under half the size of the Jr. model for even
smaller welding areas. There are 3 precision ground steel plates on this model.
A great addition for any smaller shop that is just getting started in welding!
BuildPro “Half”
WeldingTable
Part# MF-52-238
Dimensions:
Width of Table =
Length of Table = Height (w Legs) = 2’x3’ Foot Modular Welding Table
Portable Welding Table
®
•Designed for use in shops with
limited space for a dedicated
welding area.
•Three 1.1” (28mm) slots in the
tabletop allow for insertion of
clamps to reach any point on the
table. Tabletop tilts to three
positions: Horizontal, 30°,
and folded.
•350lb load capacity and only
weighs 44lbs itself!
Portable Welding
Table
41
Part# MF-PWT
38”
22”
30”
Metal fabrication
Smart
Templates
The full size BuildPro™ Welding Table is a 6’ modular table featuring
precision ground steel plates spaced 1 3/8” apart. Each plate has 57 CNC
machined 5/8” holes in a 2” grid pattern for locating, positioning and holding
BuildPro clamps and accessories. Heavy duty leveling feet allow adjustment on
uneven floors and the table has a 2 ton (4000lb) capacity!
Fold up and rolls for easy storage.
Portable Welding Table, Folding Design
Telephone:
480-968-2074
4411
®
Smart
Metal fabrication
Templates
Tube Bender
• Easily bend up to .090” wall thickness mild steel
or .125” (1/8”) aluminum
• Includes 3/4”, 1 1/2” and 2” round tube dies.
• Also includes adjustable height stand 42” - 50”
• Easy to operate
• Approximate minimum radius:
.062” wall (1/16”)
1” roll = 9” radius
1 1/2” roll = 15” radius
2” roll = 30” radius
• Weight 75 lbs
MF-WFTR5
Part# MF-WFTR5
With the tube bender you
can easily bend round,
square, or rectangular stock
to pre form your wildest
creations before welding in
place.
(Additional shipping & handling to the 48 contiguous
US states.) Note: Call for ates to Hawaii, Alaska, and
International.
Bending Brake
• Create any bracket fast and easy
• Example: Custom Fuse holder brackets
• 4” Die Width
• 3/16” Capacity
MF-WFFORM
Part# MF-WFFORM
Magnetic Angle Clamps
MF-MSA45
•With these switchable magnet angle clamps, you can get the metals
positioned right and then flip the switch.
•MF-MSA45 The patented ON/OFF switch on each of our Adjust-O magnets
will make positioning easier, and safer to use 45°, 90° (50lbs Pull)
• MF-MS2-90 Dual Switch Magnet 90° only (150lbs Pull)
• MF-MAV120 Angle Magnet 25° - 275 ° (90lbs Pull)
Part# MF-SA46HD
Single Angle Clamp Switch
Adjustable
Angle w/Dual
Switches
Part# MF-MAV120
Adjust-O Angle Magnet
MF-MAV120
Part# MF-MS2-90
Adjust-O Dual Switch Magnet
Heavy Duty
Dual Switches
MF-MS2-90
Mini Clamps
Mini clamps are ideal for keeping small metal parts in place during
preparation and welding. Great for laying up and welding amp rack
frames, weld on brackets, weldable hinges, etc.
• Each package includes one pair of Mini Clamps
• 30, 45, 60 and 90 degree angles are on each clamp
• Super strong magnet force for ultimate holding power
Part# MF-346-AT
2pc Mini Magnetic Clamp Set
42
Fixed 45º with
Single Switch
SAVE
10%
2pc Mini
Magnet Set
MF-MF-346-AT
Buy 2 or more sets at a
time and save 10%
42
3” Throat JointMaster
Part# MF-PL634
Joint Master lets you do hands-free
joints in less time.
3” Throat JointMaster 90º
•The 90° Fixed JointMaster™ features
a retractable plate for edge alignment,
V-Grooves for securely holding round
pieces.
•Ideal for holding two pieces of different
thicknesses and where individual
adjustments are required.
•The retractable metal clamping edge
plate makes edge alignment a snap.
Part# MF-PT634
Right Angle Joints
Adjustable JointMaster
•Position the Adjustable JointMaster™
fixture from 30°-275°.
•Simply adjust to the desired angle, and
“lock” into position using the handle.
•Join round, or flat work pieces, materials
with different thicknesses.
•This zinc alloy Adjustable Handle can
be tightened and reset to any
desired angle.
Part# MF-PA634
Adjustable Angle Joints
2 Axis Clamp
•The 2-axis model is a fast way to get right angles positioned for welding.
•With the 3-axis model, you can weld all three positions with one
convenient setup!
•Handy swing-away arm for easy part removal.
•Both models feature an exclusive quick acting button on the spindles to
allow the threaded studs to slide in and out for quick, easy positioning.
3 Axis Clamp
®
2 & 3 Axis Welder’s Clamps
Smart
Metal fabrication
Templates
•“L” Handle quickly adjusts and
tightens pivoting head to clamp
work pieces.
•Right Angle JointMaster™ is a fast,
precise single hand corner joining tool.
•Ideal for quick hold and release on
wood, metal and synthetic materials.
•Pivoting head can be adjusted for
varying thicknesses.
Part# MF-WAC34
2-Axis Welding Clamp
Part# MF-WAC35SW
3-Axis Welding Clamp
43
Telephone:
480-968-2074
43
Metal
Smartfabrication
Templates
®
Industrial Grade!
Complete “Nutsert” Kit
•Complete NEW Nutsert Kit!
•Shorter handles, new grips
•Double compound hinges
•(6) Interchangeable mandrels
• M5, M6,and M8
• 10-24, 1/4-20 and 5/16-18
•Incl. 10 pieces of each size “nutsert”
(also known as a “rivet nut”)
• Nutsert replacement packs sold
separately (in every size)
Part# MF-1442
Complete Nutsert Kit w/ Carrying Case
“Nutsert” Kit
Replacement Nutsert Packs
Part# MF-1442-M5
25pcs M5 thread nutserts
Part# MF-1442-M6
Part# MF-1442-M8
Part# MF-1442-10-24
25pcs 10-24 thread nutserts
Part# MF-1442-14-20
25pcs 1/4-20 thread nutserts
Part# MF-1442-516-18
25pcs 5/16-18 thread nutserts
....AND USE NUTSERTS!
Stop using drywall screws and self tappers to
mount or ground 12 volt equipment to sheet
metal in vehicles! Use Nutserts instead!
Compact Aviation Snip Set
These snips have all the power of full size snips but are 25% smaller so they’re
more maneuverable even in the most cramped spaces. The compact head
design cuts extremely tight radiuses.
• Practical locking system easily opens and closes with one hand
• Compound leverage reduces effort required to cut material
• Ergonomic handles keep hands from slipping
• 3pc Set features Right Cut, Left Cut, and Straight Cut
• Includes Nylon Pouch for storage
Part# MF-D15-SET
Weldable Hinges
•This 2-piece weld-on hinge is extremely popular because of its high
weight load capacity as well as it professional appearance.
•Made from mild steel (1015) with a case hardened fixed steel pin
and a brass washer.
•Two sizes: Small; a .19” pin, 2” length or Large; a .30” pin
and a 3” length.
Part# MF-25WH
Weldable Hinges (1/4”)
Example of the welded
hinge in a speaker
bracket application
Part# MF-50WH
Weldable Hinges (1/2”)
Welders Handbook
•A newly-updated, state-of-the-art guide to MIG and
TIG arc welding technology.
•Written by a noted authority in the field, this revised
edition of HP’s bestselling automotive book-for over
20 years is a detailed, instructional manual on the
theory, technique, equipment, and proper procedures
of metal inert gas (MIG) and tungsten inert gas
(TIG) welding.
Part# MF-WH-BOOK
44
44
Aluminum/Steel Substrates & Mesh
•Perforated aluminum or steel is great for speaker grilles or other design elements in a custom installation.
•Material is lightweight, has good corrosion resistance,excellent workability, and can be welded.
Part# RM-MESH2
Part# RM-MESH3
Part# RM-MESH4
30” x 40” (30% open area)
30” x 40” (40% open area)
30” x 40” (51% open area)
36” x 40” (79% open area)
1/16” Round Aluminum Mesh
1/8” Round Aluminum Mesh
3/16” Round Steel Mesh
Hex Aluminum Mesh
Part# RM-MESH5
Part# RM-MESH6
Part# RM-MESH7
Part# RM-MESH8
36” x 40” (65% open area)
30” x 48” (30% open area)
30” x 48” (40% open area)
30” x 48” (40% open area)
Oval Aluminum Mesh
Part# RM-MESH9
Part# RM-MESH10
Part# RM-MESH11
Part# RM-MESH12
30” x 48” (61% open area)
36” x 32” (74% open area)
36” x 32” (74% open area)
24”x32”
1/8” x 1” Steel Slot Mesh
1/2” Hex Mesh
Diamond Mesh - Fine
®
Smart
Raw Materials
Templates
Part# RM-MESH1
Part# RM-MESH13
Part# RM-MESH14
Part# RM-MESH15
Part# RM-MESH16
24”x32”
24”x32”
24”x32”
24”x32”
Diamond Mesh - Medium
Diamond Mesh - Thick
Telephone:
Large Weave
480-968-2074
Small Weave
44
55
Bendable MDF
•The bendable MDF sheet has a smooth pre-sanded (120 grit) surface,
which makes it ideal for painting, laminating, or laying up fiberglass
to pull forms.
•Sold in a 32”x 48” sheet, 1/4” thick.
Part# RM-BMDF
Smart
Raw Materials
Templates
®
ABS Plastic Sheets
•ABS sheets have high-impact strength with a textured hair-cell
finish on one side.
•Great for trim rings, dash reconstruction, speaker baffles,
instrument panels and making prototypes.
•It can be sawed, routed, glued and heat formed.
•Sold in 24”x 48” sheets.
Part# RM-ABS1
Part# RM-ABS3
Black ABS 1/16” Sheet , 32 “x48”
Part# RM-ABS2
Low Temp Plastic
•The LTP is becoming a fabricators choice because of its low melting
point and because it can be formed very easily over complicated
shapes and still remain very rigid after cooling.
•Light weight and much safer to cut or router unlike other plastics.
•LTP bonds to most materials: fiberglass, bondo, Cyanoacrylate,
and most primers and paint.
•Available in 1/8” and 1/4” thickness in a 32” x 48” sheets.
Part# RM-LTP1
LTP Plastic 1/8” Sheet, 32” X 48”
Part# RM-LTP2
LTP Plastic 1/4” Sheet, 32” X 48”
Aluminum Plate
•1/8” Thickness Aluminum Sheet
• 6061 Aircraft Grade Aluminum
• Sold in 24”x32” Sheets
Part# RM-ALUM1
6061 Aluminum Plate (24” x 32”)
ABS Wood Grain
•Wood Grain Print Laminate
• Flexible 1/16” ABS backing
• Durable High Gloss Finish
• Dimensions 27” x 36”
Part# RM-WDGRN-1
Wood Grain ABS (27” x 36”)
46
APS Power Supplies
MS Wearables
Part# MI-APS-55
55 Amp Supply, 110V
•Mobile Solutions T-shirts are 100% cotton
•Available in Black. Sizes are L, XL. or XXL.
• Designer Series artwork is a tribal style using the MS
template designs throughout
Part# MS-DS-TSHIRT
(Specify size L, XL, or XXL)
Part# MI-APS-90
90 Amp Supply, 110V
Part#MI-APS-55-220V:
55 Amp Supply, 220V
Front
Back
Temp/Humidity Clock
Custom Fuse Blocks
•These are every technician’s dream when you are building
custom installations that require many of your own discrete,
fused circuits.
•Easy to connect with a large gauge input (up to 10ga.) and
3, 6, or 9 outputs via standard ATC/ATO automotive fuses.
•These really clean up the look of multiple circuits and
provide a sensible platform that can serve as an easy to
locate point of service in the event of a component
failure.
Part# MI-BB3
3 position ATC/ATO Fuse Block
•An easy to read wall clock with temperature
(F and C) and humidity gauges.
•Silver with white dials.
•Great for mixing resin just right.
•Includes a mix chart.
•Takes the guess work out of your mix ratios!
Part# FP-CLOCK
Temperature/Humidity Clock
Part# MI-BB9
®
Part# MI-BB6
Smart
Miscellaneous
Templates
All APS Power Supplies utilize an advanced switching
design. There is no low frequency transformer hum. Every
unit is equipped with a cooling fan that is virtually silent.
APS Power Supplies all feature thermal control circuitry
that engages the fan only when internal temperatures
require it (typically 75% of full load). Additionally, these
have less than 100mV RMS of AC ripple, which means a
quiet audio system too!
•The switch mode technology utilized in APS Power
Supplies boasts 86% efficiency.
•The APS-55 requires a 15 amp circuit.
•Two of the APS-55 units can be powered from a single
20 amp circuit.
•The APS-90 requires a 20 amp circuit for EACH UNIT.
•The quick charge plug should ONLY be used for quick
charging, remove promptly after batteries are charged!
6 Position
Fuse Block
9 Position
Fuse Block
3 Position
Fuse Block
Telephone:
480-968-2074
47
Call for Orders or Information - (480) 968-2074
Fax (480) 968 0947
e-mail - sales@mobilesolutions-usa.com
web - www.mobilesolutions-usa.com
http://www.facebook.com/mobilesolutions.usa
Post Office will
not deliver without
postage applied
Mobile Solutions, LLC.
2120 E. 6th St., Suite 10
Tempe, AZ. 85281
To:

smartparts catalog

Transcription

Similar documents

CLAY WORKSHOP WITH ANNIE CHRIETZBERG

3D Life Sized Cowboy Boot Cake

Hexaflexagons! 1 Flexagons - Washington University in St. Louis

Johnny Tremain by Esther Forbes Objectives

2001 CMT New Products

Lifetouch Yearbooks®. We`ll make it easy, you`ll make it great.

eCabinet Systems Software Expands and Diversifies

Articulated Hollow Flatwing

Our Design Templates. A Users Guide.

Diane von Furstenberf for Kravet Collections