E Body Kit - Mustang Parts

Transcription

E Body Kit
- DISCLAIMER - The word "Eleanor" has two registered trademarks, one owned by Carroll Shelby in the automotive classification, and the other by Denice Halicki in video
games and toys. "Gone in 60 Seconds" is a registered trademark of Denice Halicki. GT-350, GT-500 and GT-500E are also registered trademarks of Carroll Shelby. Mustang
Depot has no affiliation with either Carroll Shelby, Denice Halicki or Ford Motor Company. The terms "Eleanor" and "Mustang" when used, are used for descriptive purposes
only and are not meant to imply any affiliation with their mark holders. Mustang Depot was one of the original distributors of the Eleanor Body Kit offered by Cinema Vehicle
Services. We have since continued without interruption with the sales of these kits, and the use of the word "Eleanor" prior to both Carroll Shelby and Denice Halicki registering
their marks. Mustang Depot is not involved in the manufacturing of these body kits, or the manufacturing of replica cars. The styling of the Eleanor Mustang from the motion
picture Gone in 60 Seconds is based on a 1967 Shelby Mustang with some slight modifications. So the styling is considered public domain and is not patented. The body kit
offered on this page is sold as an E Body Kit, not an Eleanor Body Kit out of respect for the mark holders.
These kits are manufactured by FSI. This is a direct knock-off of the original kit with
absolutely no differences in look what so ever. You can rest assured of an exact and accurate high quality
replica.
These body components are being sold either as complete kits, or purchase the parts individually.
Will fit 1967-1968 Fastbacks, Coupes or Convertibles (upper side scoops for Fastbacks only)
The 1965-66 E2 Body Kits Now Available
Made to order, please allow approx 2 weeks.
Prices do not include shipping or packaging charges.
List of Parts Included in Kit Below: front lower valance, upper nose section, hood, front fender flares, rear fender flares,
side exhaust skirts, upper side scoops (fastbacks only), lower side scoops, tail lamp panel with molded in light buckets and spoiler
trunk w/end caps. Options include four different hoods.
Part #
Description
FS-M-7001FB
1967-68 FSI E Body Kit - Fastback
$3750.00/kit
FS-M-7001CP
1967-68 FSI E Body Kit - Coupe/Convertible
$3530.00/kit
Call 702-262-0011
Price
Call 702-262-0011
Direct 702-262-0011 Fax 702-262-0099 M-F 9a-5p PST or visit our website 24/7 www.MustangDepot.com
Copyright  2007 Mustang Depot All Right Reserved. Prices are subject to change without notice.
Version 1i 10/22/2008
1
Fiberglass body parts do not fit the same as stamped steel parts. While they can be finished to show quality, fiberglass body parts are built closer to race car
standards than show car standards. Although fiberglass parts are easy to work with, they can require substantial work to conform to the varying early unibody
Mustangs. This means every car is slightly different. We have come to this conclusion after many years of installing and selling fiberglass body parts from many
different manufacturers. Within 30 days of receipt, you must check fit before sanding or painting your new fiberglass pieces. If fiberglass parts have been sanded or
painted they can no longer be sold as new for either race or show purposes. For this reason, the manufacturer will not warranty such parts and cannot be accepted
for a return. Our policy for returning fiberglass parts is limited to the purchase price of the unit on Exchange. A 20% restocking fee is applicable for the monetary
return of funds. In the event you feel the product is defective, our policy requires that you send the product back to us fully insured, heavily packaged to avoid
damages and freight prepaid. A full investigation by Mustang Depot and the manufacturer will ensue. This includes fitting the item on the respective car, matching
the part to the mold, and matching it with other items produced from the same mold. If it is determined that the product is not defective and is in reasonable
constraints for finishing, the product will be returned at the customers expense. If it is deemed that the product is defective, a replacement will be sent at no cost,
and .the return freight charges incurred by the customer will be refunded in the form of an in-store credit. All product that leaves Mustang Depot is inspected and
confirmed to be in good condition, heavily packaged, and is insured for the value of the product. Noted on the package are clear neon stickers warning you to
inspect the product in the presence of the carrier/driver. In the event damages occur, have the driver notate the damage. If the package was left at your door, you
must notify the carrier immediately and file a damage claim. Do not return the product to Mustang Depot it is our policy to refuse returns without a Return
Authorization number. Retain all the packaging so the carrier can inspect the product. In most cases, small repairs can be made at a reasonable cost. Get an
estimate, and submit the claim. Full loss claims are scrutinized much heavier. Please note: For fiberglass hoods, removal of stock hood springs and use of a prop
rod and hood pins are highly recommended. for trunks, removal of springs or tension rods is highly suggested. Fiberglass has about a 6-8 week cure time when it
comes out of the molds. So it's important to remove the parts from it's packaging immediately. Do not place anything on top of the part during storage. The part will
attempt to take the shape of whatever it's stored on top of as well. Especially in warmer climates. The best place to store the part is on the car in it's intended
position. The word Mustang and the word Shelby are used on our site for descriptive purposes only and are not meant to imply any affiliation with either Ford Motor
Company or Shelby American. Click here for our Return Policy
E Body Components
Individual Parts Pricing
• If you purchase the upper nose section, it
will not work with your stock hood
• The headlight buckets will need to be
purchased if using the upper nose, as well
• This is the same concept/dimensions as
putting a S Nose on your car
Prices do not include shipping charges. Please
allow approx 2 weeks delivery
All orders are prepaid and are special order
(ie your credit card will be charged in advance)
Part #
Description
Price
FS-M-7001US
FSI E Upper Nose Section
$469.00/ea
MR-ELN-LN1
FSI E Lower Nose Section Doesn't require Fender Flares *These do
not have the light recesses in the middle*
$489.00/ea
FS-M-7001LN
FSI E Lower Nose Section Requires Fender Flares
$469.00/ea
FS-M-7001LRH
FSI E Low Rise (Orig. Style) Hood -for use with E or S long noses
only
$575.00/ea
FS-M-7001HRH
FSI E High Rise Hood -for use with E or S long noses only
$610.00/ea
FS-M-7001USC
FSI E Upper Scoops
$300.00/pr
FS-M-7001LSC
FSI E Lower Scoops
$300.00/pr
FS-M-7001SS
FSI E Side Exhaust Skirts
FS-M-7001FF
FSI E Front Fender Flare Set Specify mold or bolt in
$350.00/pr
FS-M-7001RF
FSI E Rear Fender Flare Set Specify mold or bolt in
$350.00/pr
FS-ELN-HLB
FSI E Headlight Light Bucket Set w/Brackets not included in kits
above but required for installation
$199.00/pr
FS-678TKA
FSI E Spoiler Trunk - Fastback
$449.95/ea
FS-678TKB
FSI E Spoiler Trunk - Coupe
$469.95/ea
FS-M-7001TLP
1967 FSI E Tail Light Panel Molded Light Buckets
(Does not have hole for Gas Cap)
$245.00/ea
$420.00/set
FS-M-7001RV
FSI E Rear Valance (w/ molded holes for back-up lights)
$180.00/ea
$329.95/kit
FS-M112
1967-68 4pc Ground Effects Kit (includes 2ea side skirts, and 2ea rear
corners) Rear corners must be trimmed when using flares. Can be
supplemented for side exhaust in the kits above.
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
2
E Paint Codes
Body - Pepper Grey Metallic - Dupont Fleet 44490
Stripes - Black Metallic - Dupont Fleet 44435
1967 Tail Lamp Kit
Mustang Depot has done all the work for you on this convenient new kit.
Each Kit Includes:
Pair of New FoMoCo Lenses
Six Each New Aftermarket Bulb Socket/Pigtail Combinations
Pair of New Lens Gaskets
Pair of New 1967 S Tail Lamp Bezels/Frames
Mounting hardware is included...
Part #
Description
Price
67-STLK-2
1967 S Tail Lamp Kit with new lenses
$299.00/kit
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
3
GT40 /ACIII Rims
We are not responsible for offset/backspacing. Make sure to check clearances prior to ordering! For Custom Backspacing, please allow 4-6 weeks
for delivery. Spinners are Included but lug nuts are separate! Please specify custom backspacing required requirements in the "COMMENTS"
section of the checkout order form or call. When selecting custom backspacing, these are "custom" made Special Order wheels and cannot be
returned for any reason.
PART #
SIZE
AR-427-8165
18x10
427 Series Polished Rim/Painted Center
5-4.5
$399.95/ea
AR-427-8865
18x8
5-4.5
$379.95/ea
AR-427-8765
18x7
5-4.5
$369.95/ea
AR-427-71165
17x11
5-4.5
$399.95/ea
AR-427-7965
17x9.5
5-4.5
$384.95/ea
AR-427-7866
17x8
5-4.5
$369.95/ea
17x8
4.5” BS
5-4.5
$369.95/ea
AR-427-7866-45
AR-842042
1/2"
FINISH
PATTERN
Chrome Acorn Lug Nut Set/20
Price
$19.95/set
PART #
SIZE
AR-427P-8165
18x10
427P Series Polished Rim/Polished Center
5-4.5
$469.95/ea
AR-427P-8865
18x8
5-4.5
$449.95/ea
AR-427P-8765
18x7
5-4.5
$439.95/ea
AR-427P-71165
17x11
5-4.5
$459.95/ea
AR-427P-7965
17x9.5
5-4.5
$439.95/ea
AR-427P-7866
17x8
5-4.5
$429.95/ea
1/2"
Chrome Acorn Lug Nut Set/20
AR-842042
FINISH
Call 702-262-0011
PATTERN
Price
$19.95/set
Call 702-262-0011
Version 1i 10/22/2008
4
Bullet Mirrors
Show car quality mirrors, made in America. Exact copy of Rotunda
mirror offered years ago. Includes two styles of pads (Mustang and Cobra versions),
mounting hardware and positioning templates...
Part #
Description
C5RZ-17696-A
1965-67 Bullet Mirrors
Price
$117.95/ea
1967-68 "E" Front Light Kit w/5.75" Headlights
Includes: 1 set of WA-7402-C 5.75" Tri-Bar Headlights clear bulbs, 1 set VPS-PL2088B
projector beams for next to headlights, 1 set VPS-PL2020C small lights in lower apron, 1
set VPS-NS2160DK 6.5" Lower Center Driving Lights. Note: For cars with the rear valance
option, add one more set of VPS-PL2020C 's below. NO SUBSTITUTIONS
VPS-LK5
1967-68 E Front Lower Brace Kit Does not work with Stage 1 Lower Noses
This item helps to support the lower nose and the lower center fog lights.
JV-ELN-LFB
D1ZZ-9030-C
CSX-9030-A
Mach I Pop Open Gas Cap (Used on the movie car)
AC COBRA ROADSTER GAS CAP: 31/2", roller latch LeMans fuel filler cap.
Polish finish (Also used on the E Body Kits/Conversions) New High Quality
Reproduction (above on the right)
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
$344.95/kit
$179.00/ea
$139.95/ea
$149.95/ea
5
1965-68 Mustang Fastback Side Filler Kit
423411B
Great for E and E2 Fastbacks wanting the side filler gas cap/inlet (slight shortening may be
required for 1965-66 model cars depending on cap placement)
S7MS-8200-E
1967-68 E Front Grill Set Upper and Lower Billet Grill for E Nose Only
This item is sold separately, or one of our inclusive kits below.
$219.95/kit
$359.95/set
Part #
Description
Price
ML-MK3-Kit
1964-73 Steering Wheel Kit- Real Mahogany Rim! (Polished Adaptor Kit,
Horn Kit and Horse Emblem Included)
$359.95/kit
ML-MK4-Kit
1964-73 Steering Wheel Kit- Real Black Leather Rim! (Polished Adaptor Kit,
Horn Kit and Horse Emblem Included)
$359.95/kit
Whether you’re working on Steel, SMC, FRP, fiberglass, rigid plastic, semi-rigid plastic, flexible plastic or panel bonding,
Norton SpeedGrip Urethane Structural Adhesive gets the job done. This product will help to reduce the potential for
cracking when bonding fiberglass to metal. While retaining flexibility after curing, it can be sanded and painted. Yes you
can use it as the filler instead of bondo. Ideal for bonding on the flares, skirts, and side scoops on our E & E2 Body Kits.
Can also be used in place of 2 way adhesive tapes commonly used on late model side scoops and skirts.
Part #
Description
Price
636425-04616
636425-04617
636425-04627
636425-41400
Speed Grip 5 Minute Set Time (2ea tips included)
Speed Grip 15 Minute Set Time (2ea tips included)
Speed Grip Self Mixing Tips
Speed Grip Heavy Duty Manual Applicator Gun
$39.95/ea
$39.95/ea
$7.95/ea
$69.95/ea
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
6
Ultra Interior Kit
Each kit includes the following
TMI Front and Rear Seat Upholstery
A Pair of Arm Rest Pads
TMI Padded Sun Visors
A Pair of Chrome Arm Rests Bases
(1965-66 Only)
TMI Door Panels
A Moonskin Headliner
(Coupe/Fastback Only)
Auto Custom Carpet 80/20 Carpet
Front & Rear Windshield Seals
(Coupe/Fastback Only)
16 Feet of Windlace
(8 Feet in Convertible Kits)
Quarter Trim Upholstery
(Convertible Only)
Dash Pads from Dashes Direct are optional below. For the 1965-66 cars, we supply reproduction dash pads.
Two tone colors are available in; Lt Blue/Blue, Red/White & Blue/White
Certain colors are not available. These colors include; Ivy Gold, Parchment & Palomino.
Part #
Description
Price
MD-INT1
1967-68 Coupe Standard Interior Kit
Please specify Year, Door Panel/Arm Rest Color, Upholstery Color and Carpet Color
$499.95/kit
MD-INT1DP
1967-68 Coupe Standard Interior Kit with Dash Pad
Please specify Year, Door Panel/Arm Rest Color, Upholstery Color, Carpet Color and Dash
Pad Color
$684.95/kit
MD-INT2
1967-68 Fastback Standard Interior Kit
Please specify Year, Door Panel/Arm Rest Color, Upholstery Color and Carpet Color
$499.95/kit
MD-INT2DP
1967-68 Fastback Standard Interior Kit with Dash Pad
Please specify Year, Door Panel/Arm Rest Color, Upholstery Color, Carpet Color and Dash
Pad Color
$684.95/kit
MD-INT4
1967-68 Convertible Standard Interior Kit Please specify Year, Door Panel/Arm Rest Color,
Upholstery Color and Carpet Color
$459.95/kit
MD-INT4DP
1967-68 Convertible Standard Interior Kit with Dash Pad Please specify Year, Door Panel/Arm
Rest Color, Upholstery Color, Carpet Color and Dash Pad Color Carpet Color =
$644.95/kit
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
7
Ultra Suspension Kit
Picture shown with optional rear sway bar and KYB shocks.
Build your suspension kit with the BEST and most current suspension components available on the market today! The Ultra Suspension Kit
includes everything to take your stock suspension to the next level. The "upgrades" we offer will build upon the suspension and chassis with the
latest technology and bring your car to a competitive weekender, or even a full race set-up. This kit has everything you need to completely change
out your front and rear suspension.
Each Kit Includes:
•
•
•
•
•
•
•
•
•
•
•
•
Front Coil Springs (1" Lowering on Perf. Springs)
Performance 4 Leaf Standard Eye Leafs
1" Front Sway Bar Kit
KYB Front and Rear Shock Absorbers
3 Options for Coil Springs Insulators
Polyurethane Sway Bar End Link Kits
Polyurethane Sway Bar Frame Bushing Kits
New Leaf Springs Shackles w/Rubber Bushings
Upper Control Arm Set (Made in the USA)
Lower Control Arm Set (Made in the USA)
Either Rubber or Poly Urethane Strut Rod Bushings
Spring Perches
Upgrades Available:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Bilstein Street Shocks $350
Classic 4.5 Leaf Mid Eye 1" drop Leafs = $30.00
Classic 5 Leaf Standard Eye Leafs = $50.00
Classic 5 Leaf Mid 1" drop or Rev Eye 2"drop = $50.00
Maier Racing 165 Race or 200 Race = $160.00
Racing Shackles $35.00
700# Perf. Big Block Coils "no drop" $45
3/4" Non Adj. Rear Sway Bar Kit $95.00
Maier Racing 5/8" Adjustable Rear Sway Bar $229
Maier Racing Adjustable Pan Hard Bar for $359
Pan Hard Bar and Adj Rear Sway Bar for $588
Roller Perches for $170.00
TCP Strut Rods $469
1 1/8 Inch Front Sway Bar $10
The stock ride height in the front can be accomplished by using the 1" "Insulator Option" below. Ride heights are referring to the stock, right off the
assembly line heights. Most cars have sagged over the years so actual height lowering may vary from these numbers. Please Call on ALL Big
Block Cars! Please specify year, model, engine size, leaf springs preferred, size of insulators preferred, and either standard or upgraded shackles.
Part #
Description
Price
SS-US1Stg1
1964-70 Ultra Performance Suspension Rebuild Kit - Stage 1
$799.95/kit
SS-US1Stg2
1964-70 Ultra Performance Maier Combo Suspension Rebuild Kit - Stage 2
$1269.95/kit
SS-US1Stg3
1964-70 Ultra Performance TCP Combo Suspension Rebuild Kit - Stage 3
$1749.95/kit
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
8
Used on the original movie car! TCP’s
Coilover Conversion Kit is the definitive
solution for improving the handling of your
classic automobile. Using current technology,
materials and racetrack proven techniques,
we are able to offer a suspension package
that even the most modest of drivers can
benefit from. You can now enjoy the security,
confidence and handling characteristics of a
newer vehicle without making irreversible
modifications to your classic automobile.
TCP’s Design
Vari Shock
Coilovers
Our use of TIG welded, tubular steel
control arms and Kevlar Injection
Molded Rod Ends, prevent much of this
deflection. The tubular control arms
resist the twisting and bending that the
stamped design is subject to. The state of the art rod
ends create an extremely precise pivot point that
ensures accurate travel throughout the suspensions
range of motion.
We have also made corrections to the original geometry
of the suspension. Our design induces negative camber
as the suspension loads, which keeps more of your tire's
contact patch on the road. The upper ball-joint angle has
also been corrected to prevent binding at the top of the
travel arch. The lower mount of the shock is relocated to
the strut rod plate at the lower control arm. This
modification effectively transfers the weight of the vehicle
closer to the pivot axis of the spindle, which eliminates
the flex normally induced upon the upper control arm.
Please confirm spring rate. Recommended spring rates
450 for a small block and 550 for a big block. Small block
kits shown below.
The QA1 shock
absorber is
machined from 6061
T-6 billet aluminum stock, which
provides superior heat dissipation,
maximum strength and quality
appearance. Special features are easy
six-position compression and sixposition rebound damping adjustments,
an internally vented oil chamber which
protects the top seal from excess
pressure and stops leakage, nitrogen
gas charging for fade-free damping and
consistent operation, and hydraulic antitopping. Bottom threaded nut quickly
changes spring preload to adjust ride
height.
Part #
Description
Starting Price
TCP-COLVF-09
1967 Coilover Spring Conversion Small Block
$2485.00/kit
TCP-COLVF-10
1968-79 Coilover Spring Conversion Small Block
$2485.00/kit
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
9
TCP Rack and Pinion
The cure for poor steering... For many classic car
enthusiasts, a car that isn't up to today's handling standards
can sometimes taint the joy of ownership. Some owners are
known to comment that they "love everything about their car,
except the way it steers". Our Rack & Pinion Kit is the cure for
the poor steering characteristics of your classic car.
Patent Pending
Precision Operation...
Our Rack & Pinion Kit eliminates the "play" in the steering system. By using a more direct gearing system
than the factory steering box we have enabled a more efficient transfer of energy. As you turn the steering
wheel the steering shaft turns the pinion gear. The pinion gear is in direct contact with the rack gear. The
centerlink, which the inner tie-rods bolt to, is bolted directly into the rack gear. This simplified gearing
system gives the steering a tight, direct feel that the factory steering box is incapable of.
Factory Steering...
The factory steering box uses a
worm and sector gearing system
that is very susceptible to wear.
As the worm gear turns, the contact edges slide
along the surface of the sector gear and
consequently wear these surfaces down. After
some use this sliding action creates slack
between the gears which translates into
unwanted "play" at the steering wheel. This "play"
creates a delay in the control of the front wheels.
Rack & Pinion...
A pinion and rack gear are less
susceptible to wear. As the pinion gear
turns it pushes against the rack gear
which reduces the sliding action. Reduced wear
insures increased precision by maintaining a tight fit.
This precision provides immediate control and
feedback from the front wheels.
Quicker Ratio...
A quicker ratio means fewer turns of the steering wheel while maintaining the same turning radius. Our
Rack & Pinion requires only 3 turns from lock to lock. The factory steering systems were a slow
responding 4 turns. A more sensitive steering system will get you pointed in the right direction in less time.
You will enjoy quicker turning response and more confidence in all types of driving situations.
Highest Quality...
Every component is manufactured from the highest quality materials available. Billet steel construction of
the internal gears, stainless steel lines, durable rubber boots, grade 8 mounting hardware combined to give
you a reliable and quality steering system.
Easy Installation...
This kit has been designed for the easiest possible installation. Whenever possible, factory mounting
locations are used and extensive cutting is avoided. We provide detailed installation instructions with photos
to make the installation as straightforward as possible. For those other than textbook installations we have
free tech support available during business hours. Our rack will clear most aftermarket headers and work
with small or big block engines.
Improve the steering characteristics of your classic automobile! Order today!
Continued on next page…
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
10
TCP Rack & Pinion Conversion (Please note: You must pick an installation kit below)
Part #
Description
Price
TCP-RCKMFD67
1967-70 TCP Mustang Manual Rack & Pinion Conversion Please select an
installation kit below! Includes Eccentric Eliminator Kit!
$1329.00/kit
TCP-RCKPFD67
1967-70 TCP Mustang Power Rack & Pinion Conversion Kit - Please select an
installation kit below! Includes Eccentric Eliminator Kit!
$2029.00/kit
Please pick your Manual R&P Installation Kit
Part #
Description
Price
M65-66-LS-SB 1965-66 Mustang Manual R&P Installation Kit - Long Shaft / Small Block
N/A
M67-LS-SB
N/A
1967 Mustang Manual R&P Installation Kit - Long Shaft / Small Block
M67-69-SS-SB 1967-69 Mustang Manual R&P Installation Kit - Short Shaft / Small Block
N/A
M69B-70-SSSB
1969Boss-70 Mustang Manual R&P Installation Kit - Short Shaft / Small Block
N/A
M67-LS-BB
1967 Mustang Manual R&P Installation Kit - Long Shaft / Big Block
N/A
M67-69-SS-BB 1967-69 Mustang Manual R&P Installation Kit - Short Shaft / Big Block
N/A
M69B-70-SSBB
1969Boss-70 Mustang Manual R&P Installation Kit - Short Shaft / Big Block
N/A
MF60-65-LSSB
1960-65 Falcon Manual R&P Installation Kit - Short Shaft / Small Block
N/A
Please pick your Power R&P Installation Kit
P65-66-LS-SB 1965-66 Mustang Power R&P Installation Kit - Long Shaft / Small Block
N/A
P67-LS-SB
N/A
1967 Mustang Power R&P Installation Kit - Long Shaft / Small Block
P67-69-SS-SB 1967-69 Mustang Power R&P Installation Kit - Short Shaft / Small Block
N/A
P69B-70-SSSB
1969Boss-70 Mustang Power R&P Installation Kit - Short Shaft / Small Block
N/A
P67-LS-BB
1967 Mustang Power R&P Installation Kit - Long Shaft / Big Block
N/A
P67-69-SS-BB 1967-69 Mustang Power R&P Installation Kit - Short Shaft / Big Block
N/A
P69B-70-SSBB
N/A
1969Boss-70 Mustang Power R&P Installation Kit - Short Shaft / Big Block
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
11
TCP Subframe Connectors
Fits: 1964 1/2 - 1970 Mustang and Cougar Coupe, Fastback & Conv.
Part #
Description
Price
1964-70 Drive Shaft Safety Loop
$89.00/set
1964-70 Coupes/Fastbacks Subframe Connectors Kit 1 (outside section / weld-in)
$169.00/set
1964-70 Coupes/Fastbacks Subframe Connectors Kit 2 (center section / bolt-in)
$195.00/ea
1964-70 Convertible Subframe Connectors Kit 1C
(outside / weld-in)
$185.00/set
1964-70 Convertible Subframe Connectors Kit 2C
$205.00/ea
1964-70 Coupes/Fastbacks Subframe Connectors Complete Package Kit (Includes driveshaft
safety loop)
$449.00/ea
1964-70 Convertibles Subframe Connectors Complete Package Kit
$385.00/ea
TCP-DSL-01
TCP-SUBFC-01
TCP-SUBCS-01
TCP-SUBFC-02
TCP-SUBCS-03
TCP-PKG-SFC-01
TCP-PKG-SFC-02
Shock Tower Braces
During cornering your car's chassis has a tendency to flex a great deal, allowing unwanted changes in its overall handling performance. Our
Shock Tower Brace is designed to help eliminate unwanted flex, keeping your car's chassis properly aligned. By stiffening the shock towers to the
firewall and shock tower to shock tower, you vehicle stays tight and goes where you point it. Left & Right Rod Ends offer complete adjustability
to help you dial-in desired handling characteristics.
Part #
Description
Price
TCP-TWRB-01
1964-70 Mustang Tower Brace Kit 1 (Export Brace Portion)
$160.00/kit
TCP-TWRB-02
1964-70 Mustang Tower Brace Kit 2 (Monte Carlo Bar Portion)
$120.00/kit
TCP-TWRB-03
1964-70 Mustang Tower Brace Kit 3 (Tie’s in Kit #1 to Kit #2)
$115.00/kit
TCP-TWRB-123
Mustang Tower Brace Kit Set 1,2 & 3
$395.00/kit
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
12
Our Rear Coilover System is the most technologically advanced rear suspension system available for
vintage Mustangs. We have put together elements from various racing series in a package that fits neatly
into your vehicle with only minor modifications to the existing chassis. Quick access for maintenance was
also taken into account during the design process. The entire rearend system can be removed from the
vehicle in a matter of minutes. If you want razor sharp handling for your Mustang then this is the system
for you.
The positioning of the shocks is the most eye-catching feature of the system. Pushrods are used to
actuate the shocks. Removing the shocks from the axle housing greatly reduces the amount of unsprung
weight and allows the shocks to work more efficiently. Placing the shocks below the axle lowers the
center of gravity to improve handling. click here for the complete data sheet and Expanded Application
Guide
Part #
Description
Price
TCP-RCOV65-55
1965-66 TCP Rear Coilover Conversion
Truck Freight Collect
$4889.00/kit
TCP-RCOV67-70
1967-70 TCP Rear Coilover Conversion
Truck Freight Collect
$4889.00/kit
Part #
Description
Price
A111-28
SSBC Force 10 Rear Disc Conversion for Fab9 Housing
Internal parking brake, Force 10 SuperTwin aluminum caliper. 11.25"
Slotted/Plated Rotor. Click on part number for more details
$1394.00/kit
CE-67Axl31TF
1967-70 Currie Forged Axle Kit 31 Spline Torino Flange for 53.75" Housing
Kit includes two axles, assembled and complete with studs, bearings and seals
ready to install.
$449.95/kit
Side Exhaust Kits
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
13
Fig. A
•
•
Fig. C
Fig. D
The Dr Gas side exhaust kits are designed to run with your 65-04 Mustang making 12 more horsepower than Walker Race Bullets and
noticeably quieter. The Dr Gas kit uses Spintech mufflers with mandrel bent tubing.. The tubing is flattened to go under subframe
connectors (see Fig. A). The size of the Dr Gas tip is dim 5.5" x 2" (See Fig. B). Options include tube sizes 2.5" and 3", addition of XPipe technology with long or short tube headers...
The new Side Exhaust with Cast Aluminum E Tips is uniformly contoured to the exhaust hole on the side skirt (See Figure C) This is
the same kit as above using the E tip. These work with both the 1967-68 E Body Kit and the 1965-66 E2 Body Kit. The cast has
flattened contour to go under subframe connectors and pre-tapped holes for securing the tip with hangers. (See Figure D). Please
Note: If you are using TCP-SFKit2, it is very close to the center section and you will have to fabricate new exit tubes between the
mufflers and tips. On all cars, it's expected that some modification will be necessary to the Dr Gas exit tube that comes out of the
muffler to meet the tip, as these tips were not specifically designed for the Dr Gas Exhaust Kit. The rocker area will need to be
modified for the exhaust tip to exit comfortably. You would cut the outer rocker slightly larger than the hole opening and weld in
fillers so the inner rocker is not exposed. It's a good idea to trim the pinch weld where the tip would run underneath. The hole opening
is the same between the Maier E Kit skirts and the E2's skirts. Convertibles require a special pipe so please call prior to ordering.
Part #
Description
Price
S7MS-5255-E
E Tip Set 2.5" Inlet Cast Aluminum - Polished Tip Openning
$309.95/set
PMS-SX6100-SPEC1
1965-04 Side Exhaust Kit 2.5" Tubing w/E Tips
from behind the X pipe pictured above and back
$769.95/set
PMS-SX6100-SPEC2
1965-04 Side Exhaust Kit 2.5" Tubing w/X-Pipe & E Tips
for Shorty Headers (pictured above)
$1049.95/set
PMS-SX6100-SPEC3
1965-04 Side Exhaust Kit 2.5" Tubing w/X-Pipe & E Tips
for Long Tube Headers
$1069.95/set
PMS-SXD6130-SPEC1
1965-04 Side Exhaust Kit 3" Tubing w/E Tips
from behind the X pipe pictured above and back
$899.95/set
PMS-SXD6130-SPEC2
1965-04 Side Exhaust Kit 3" Tubing w/X-Pipe & E Tips
for Long Tube Headers
$1094.95/set
All JBA Headers come standard with 14 gauge steel nickel/chrome finish, hardware gaskets, instructions
and a limited lifetime manufacturers warranty…
JBA-1650
Add JBA Headers 289, 302
$499.95/set
JBA-1653
Add JBA Headers 351W
$599.95/set
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
14
Customer Cars
”
Mustang Depot Order Sheet
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
15
___________________________________________________________________
Ship To Address: (Cannot be a PO Box)
First & Last Name
:
Street Address
:
City, State & Zip
:
Day Time Telephone # :
Email Address
:
____________________________________________________________________
Billing Address: (Required! Must match billing address on credit card)
Name
:
Address
:
City, State & Zip
:
____________________________________________________________________
Method of Pre-Payment: (No COD's)
Card Type
:
Card Number
:
Expiration Date
:
____________________________________________________________________
Year, Make & Model:(Please enter all info relative to your order)
Part Number
Description
Qty
Price
TOTAL
___________________________________________________________________
I hereby authorize Mustang Depot to charge my credit card account for the parts listed above and
including shipping & handling fees incurred in the transportation of the merchandise requested
above.
Returns within 30 days only, are subject to a 20% restocking fee. Shipping charges
figured at 8% (.08) of the total sale and are non-refundable. Prices are subject to change
without notice. Call for pricing and availability. Please include a copy of your driver’s
license…
Signature X______________________________
Print Name Here__________________________
Date ___________________
Mustang Depot 2510 E Sunset Rd #7 Las Vegas, NV 89120
Terms and Conditions
Mustang Depot is not affiliated with Ford Motor Company. Mustang Depot reserves the right to refuse or cancel any order at any time!
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
16
Your access to and use of the Mustang Depot, including any purchase made using our web site is exclusively governed by these terms and conditions and any others contained on this web site
(collectively, "Terms and Conditions"), as may be supplemented by applicable law. By accessing, using or purchasing products from Mustang Depot, you agree to be bound by the Terms and
Conditions. The Terms and Conditions may be changed at any time without prior notice. We will make changes by modifying our web sites. Your continued access to or use of the modified web
sites conclusively demonstrates your acceptance of those changes prospectively. No other provisions or changes are binding upon us unless reduced to writing and signed by an authorized
Mustang Depot representative. If any provision of the Terms and Conditions or any application thereof is held to be invalid or unenforceable for any reason, that provision shall be deemed sever
able and the remainder of the Terms and Conditions and the application of that provision in other situations shall not be affected. All pictures herein are for representation purposes only.
Although we do our best to provide as clear and accurate pictures as possible, the picture may be of a product similar to the actual one (ie different year, etc) Some of the products we sell are for
racing and off-road vehicle only, lighting products are solely as auxiliary lighting. Please check with your local DMV or vehicle department for regulations and information. Mustang Depot is not
responsible for any legal issues regarding any of the products purchased from this site. For your own concern, please make sure of your orders and the legality of the product before making any
purchases. We reserve the right, without liability or prior notice, to revise, discontinue, or cease to make available any or all products or to refuse or cancel any order.
Shipping Terms
Mustang Depot will process all orders received the day after the order is received. We do not guarantee stock. If the item is currently available, the product will ship the day following the order
date, with respect to the type of delivery service requested by the customer. (For example; If you order something on Monday selecting the Next Day Air Option, if the product is available, your
order will be processed and shipped on Tuesday and you should receive it by Wednesday) This does not include weekends and holidays. We are not liable for shipping charges, for items that are
not currently in stock. We will ship the item the manner in which it was ordered (i.e. Next Day, 2nd Day) whenever the product is or becomes available... There are no refunds given for
shipping charges! We will do our best to fill orders that we don't have currently in stock. We have a network of affiliates, which allows us the ability to pursue the product from other sources.
However, it is not too uncommon for nationwide backorders to be in effect due to manufacturer hold-ups on certain items. The term used herein as "Free Shipping" only applies to "Ship To"
addresses within the continental USA only. When a product is deemed "Free Shipping," other shipping options including 3 Day, 2nd or Next Day Air, will have to be paid separately. On large
items deemed "Truck Freight Collect" the bill for freight will be due upon arrival of the parts. Shipping charges are, in all cases, the complete responsibility of the customer and Mustang
Depot will not be liable in any case for shipping charges incurred by the customer. This includes both from the origin to the customer and from the customer to the origin. We do not currently
accept international orders...
Other Policies
Special Order Items - Some items listed in this catalog are made to order by the manufacturer. These Special Order items require pre-payment by debit card, credit card, or wire transfer and are
not returnable. Back Orders - Items temporarily out of stock will be placed on back-order unless you indicate that a refund should be made. All shipping charges on regular domestic orders are
charged on the initial order, so back orders are shipped at no additional charge. Back ordered items usually are shipped within 30 days, however, availability can change and Mustang Depot
reserves the right to cancel any back order and issue a refund. Refused Shipments - The customer is responsible for freight both ways on any shipment for which delivery is refused
Sale Items - At no time are refunds given on items that may go on sale after purchase.
Warranty Disclaimer; Limitation of Liability
Mustang Depot expressly disclaims, and the purchaser expressly assumes, responsibility for any incidental or consequential damages arising from any and all product failure, sold through
Mustang Depot. Defective product liability is limited to the replacement/purchase price of the product and is provided by the manufacturer of the goods.. Any provision voided by state or other
applicable law shall not act to enlarge other provisions of this warranty except as expressly required by law. Mustang Depot products are provided "AS IS." We do not make any representations
or warranties, whether express or implied, regarding or relating to Mustang Depot or any associated hardware or software, including the content or operations of either. TO THE FULLEST
EXTENT PERMITTED BY LAW, MUSTANG DEPOT DISCLAIMS ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MUSTANG DEPOT OR ANY OF ITS EMPLOYEES, DIRECTORS, OFFICERS,
AGENTS, VENDORS OR SUPPLIERS (collectively, the "Mustang Depot parties") BE LIABLE FOR ANY DIRECT OR INDIRECT LOSSES OR DAMAGES ARISING FROM OR
RELATED TO ANY PRODUCTS, SERVICES OR SOFTWARE PROVIDED HEREIN. This limitation of liability applies to all losses and damages of any kind whatsoever (whether general,
special, consequential, incidental, punitive, exemplary, or otherwise, including loss of income, profits, or data), whether arising in contract, negligence or other tort theory, even if we have been
advised of or should have known of the possibility of such losses or damages. The preceding Warranty Disclaimer and/or Limitation of Liability shall survive the failure of any exclusive remedy,
but they may be prohibited or restricted by applicable law so they may not apply to you. YOU AGREE TO INDEMNIFY, DEFEND AND HOLD HARMLESS THE MUSTANG DEPOT
PARTIES FROM AND AGAINST ANY AND ALL THIRD PARTY CLAIMS, DEMANDS, LIABILITIES, COSTS OR EXPENSES, INCLUDING REASONABLE ATTORNEYS' FEES,
ARISING FROM OR RELATED TO ANY BREACH BY YOU OF ANY OF THE TERMS AND CONDITIONS OR APPLICABLE LAW, INCLUDING THOSE REGARDING
INTELLECTUAL PROPERTY. All products herein are reproductions and not affiliated directly with either Ford or Shelby American unless noted. All Ford brand products are licensed by Ford
through the respective manufacturer. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Information and
prices are subject to change without notice.
Privacy Statement
We consider the personal information you choose to share with us to be confidential. We do not share any personal or identifying information you submit directly or through our web sites with
any unaffiliated third party, unless it is necessary to respond to your inquiry or required by law. We train our associates to respect and protect our customers' privacy. We limit our associates'
access to information about you, and stress the importance of your privacy with our associates. If you just view our web sites, we do not collect any personal or identifying information about you.
We do monitor the number of visits to our web sites, but only in the aggregate. This information is important for us to provide the best possible service to you.
Return Policy
Within 30 days of your purchase, items can be returned to Mustang Depot via UPS for a refund. There is a 20% restocking fee imposed on all goods returned for a refund! In-Store Credits can
be issued in the full amount of the product, less shipping charges! Shipping charges are always non-refundable! Either way, it's necessary to obtain a Return Goods Authorization (RGA)
number from Mustang Depot. Obtaining an RGA number ensures that the return process is handled efficiently and that credits are issued in a timely manner. Within 30 days of receipt of
items purchased from Mustang Depot customers may choose to return:
•
Any new item in original packaging and original/unused condition
•
If you install the item(s), it will be deemed un-returnable.
•
Any used Core, as long as it is shipped in the box that contained the new product
•
Any item received in a damaged or defective condition
•
Any item received in a damaged or defective condition.
•
Any item received in error.
Goods Not Accepted for a Return
•
If you purchase a product and find it doesn't fit due to any modification to the car from stock (ie. Engine Swap, Transmission Swap)
•
No return on electrical parts, books, special order items, or items we disclaim in advance...
Obtaining a Return Goods Authorization Number When you plan to return items via UPS to Mustang Depot, it's necessary to obtain a Return Goods Authorization (RGA) number. RGA
numbers help us process returns quickly and efficiently. Please Call (702) 262-0011 or email customerservice@mustangdepot.com for your RGA number request. Please include the reason for
the return, date the order was placed, your order number, name, phone number, and shipping address.
Returning Items to MustangDepot.com Simply take your package to any location that has regularly scheduled UPS pick-ups. You may want to check with your place of employment to see if
they have regular UPS pick-ups. Or, you can call 1-800-PICK-UPS (1-800-742-5877) or visit the UPS Web site at www.ups.com/using/services/locate/locate.html. As long as your return address
label is attached and the RGA number is included, it will insure the prompt and efficient handling of your return. Please note: you must insure the item with the carrier for the total amount
of the sale!
Credit and Return Shipping Costs Within 15 business days of receipt of your returned item, you will be issued credit for the original purchase price, plus applicable sales taxes, and less
applicable re-stocking charges. Core credits will also be processed within 15 business days.
If the reason for your return was caused by Mustang Depot, or one of our business partners (i.e., damaged or defective items, wrong part shipped), we will cover the freight charges on the
replacement items. All other returns (i.e., didn't want, doesn't like) will be limited to the invoiced price less a 20% restocking fee, and less the shipping charges. In-store credits can be issued for
the full purchase price of the goods, less shipping charges.
Thank you for choosing Mustang Depot
Call 702-262-0011
Call 702-262-0011
Version 1i 10/22/2008
17

E Body Kit - Mustang Parts

Transcription

Similar documents

Johnny Tremain by Esther Forbes Objectives

Activity Kit - Draw Flynn`s Nose The Magistrate just can`t get Flynn`s

Saebo Evaluation and Treatment Kit

Gravlax Kit Guide and Information

LGOBO SALE SHEET

WWW.MUSTANGBARN.COM WWWW.MUS STANGB BARN.C COM

The wardrobe malfunction — it`s a Hollywood moment that

Remanufactured Parts - Depot International

New Korando Accessories

See store for details!