NGL pdf

Transcription

NGL pdf
AB
.
2015
1999
http://www.youtube.com/permabosslaser
OSS
OM
M
C
Put Your Embroidery Business on Steroids with
the Permaboss NGL “Your Bridge Laser Alternative”
PER
Profitable
Proven
Affordable
AN
N I V E R S A RY
Multi-Layer Felt Appliqué
Made in seconds directly
on the garment from any
embroidery machine or file!
Never place another
letter by hand again!
Take seconds, to do what
takes others minutes! Keep
your embroidery machine
running without stopping to
place precut letters!
Increase embroidery output
4-5 times using the NGL 50!
Full Front Tackle Twill
Corporate appliqué at
speeds turnover and quality
overseas can’t touch for
comparable prices.
Best of all, on your own
embroidery machine!
Left Chest Tackle Twill
Corportate Logos have never
been easiest to make! Great
for Moisture Management
Garments where puckering
from traditional embroidery is
typically a headache!
Laser Etching on all kinds of promotional
materials, not just textiles! In 3 seconds!
Portfolios, Radios, Desk Accessories, Display and
Gift Boxes, Carabineer, Wood Plaques, Clocks,
Pad Printing Plates, Marking Laser Engravable
Plastic, Cutting Acrylic, Cutting Wood, Business
Card Cases, Paperweight, Pens & Calculators,
Picture Frames, Gift Sets, Money Clip, Designer
Accessories, Key Chains, etc...
Scanning 3D Embroidery Laser
• The addition of a Permaboss NGL laser will allow you to do
what most other embroidery shops CAN’T do.
• The NGL will allow you to DO exactly what costly $150,000$200,000 plus bridge lasers can do using only 16 square feet of
floor space but for a fraction of the price.
• The NGL Series of Scanning (galvo) CO2 lasers are significantly
faster than traditional plotter lasers and can cover the same
area 5-20 times faster.
• Easy to learn, easy to use software is included with a PC
• Reduce stitch count by 80-90% as compared to Fill Stitch, offer
your customers decoration alternatives your competition can’t.
• Make your embroidery more valuable & profitable by
combining details and layers that are impossible without an NGL.
Unleash your imagination with the power of Permaboss.
Offer stunning multimedia 3D laser designs
in less time than ever before!
Call about our FREE Demo Video, Sample Kit & Info Binder
Technology for Every Size Business
Designed by Austrians. Made in Canada. Sold to the World.
65 - 85% USA Content. NAFTA Friendly.
Copyright © 1999 - 2015 Permaboss.
Toll Free: 1-855-PERMABOSS Toll Free Fax: 1-877-552-7375
235 Industrial Parkway S., Unit 18, Aurora ON L4G 3V5 CANADA | (Mon.-Fri. 9-5 EST) | T: (905) 713-6514 F: (905) 713-6506
US Mailing Address: 4450 Witmer Industrial Estates, Unit 4, Niagara Falls, NY 14305-1391
info@permaboss.com
Permaboss reserves the right to make changes at any time, without notice to equipment, specifications, models, prices and availability.
OM
PER
.
2015
1999
http://www.youtube.com/permabosslaser
OSS
C
Permaboss NGL “Next Generation Laser”
THE LASER BRIDGE ALTERNATIVE
M
AB
AN
N I V E R S A RY
www.permabosslaser.com
• GALVO/SCANNING: Cutting by vaporisation of material.
• Comes Standard with 40W Universal CO2 laser source includes red laser scanner beam for visual confirmation.
• Available with optional (plug and play)100W Universal
laser source, or 40W, 60W, 80W, 100W and 200W Synrad
laser source.
• Stand alone laser can be added to a gantry system at
any time and used with any embroidery machine brand.
• Standard Cutting and engraving Area 250mm x 250 mm
Optional 360 mm by 360 mm with higher power laser source.
• 24 months unlimited use warranty. Laser tube included.
• Spot size 390 micrometers 0.39 mm or 0.015”. Higher
wattage models come with smaller spot sizes.
• (Human hair = 0.08mm 5.3x bigger)
• The head moves through an aluminum structure. It is
controlled by a BOSCH servo motor and stops just in front of
each embroidery head to perform the corresponding
cutting or engraving process.
• This moving head receives support from a positioning and
operating program which allows it to work with one or
several embroidery machines depending on the
project/job.
Power Requirements:
16A 220v 1ph 50/60 Hz
Laser Body Weight:
70 Kg (156 lbs)
• Includes PC, EZ Cut laser control software and includes
Permaboss “LaserWorx” Design software.
Shipped Weight:
160 Kg (350 lbs). Shipping
crate size: 48”x48”x55”
Aspiration Turbo Blower:
Included (customer to supply
plumbing to exterior vent)
Working Area:
250 x 250 mm
OR up to 360 x 360 mm (14 x 14 In)
• Meets or exceeds CSA, UL, CE, FDA and OSHA regulations.
Head speed capable:
Capable up to 3000 mm/s.
980 mm/s. Practical for
OSHA safety compliance
Profile precision:
+/- 0.038 mm over 12m span
(Remember that felt layers
over more than 1mm!)
System repeatability:
+/- 0.013 mm
Laser Power Source Options:
Universal 50W or 100W
Synrad 65W, 100W or 200W optional
Galvo mark/cutting speed:
Up to 5000 mm/s
Designed by Austrians. Made in Canada. Sold to the World.
65 - 85% USA Content. NAFTA Friendly.
Invisible laser radiation
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
MAX CONTINOUS POWER 110W
WAVELENGTH: 10.6 nm
Class 4 laser product - (IEC-60825-1)
Copyright © 1999 - 2015 Permaboss.
Toll Free: 1-855-PERMABOSS Toll Free Fax: 1-877-552-7375
235 Industrial Parkway S., Unit 18, Aurora ON L4G 3V5 CANADA | (Mon.-Fri. 9-5 EST) | T: (905) 713-6514 F: (905) 713-6506
US Mailing Address: 4450 Witmer Industrial Estates, Unit 4, Niagara Falls, NY 14305-1391
info@permaboss.com
Permaboss reserves the right to make changes at any time, without notice to equipment, specifications, models, prices and availability.