Table of Contents
Anhydrous Ammonia
Liquid
Manifolds and Splitters. . . . . . . . . . . . . . . . . . . . . . . . 3
Chemical Transfer Pumps . . . . . . . . . . . . . . . . . . . . . 58
Impellicone Manifolds Kits . . . . . . . . . . . . . . . . . . . . . 4
Liquid Fertilizer Pumps . . . . . . . . . . . . . . . . . . . . . . . 59
Raven NH3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Pump Skids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Raven Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . 11
N-Ject LF by Capstan Ag . . . . . . . . . . . . . . . . . . . . . . 64
Capstan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Dickey-John NH3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Dickey-John Troubleshooting. . . . . . . . . . . . . . . . . . . 16
GRANULAR
Manual Meters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Simonsen Spreaders & Tenders . . . . . . . . . . . . . . . . . 65
Flo-Max Breakaway. . . . . . . . . . . . . . . . . . . . . . . . . . 18
Willmar Spreaders. . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Air Drill Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Granular Accessories. . . . . . . . . . . . . . . . . . . . . . . . . 73
NH3 Tanks & Wagons. . . . . . . . . . . . . . . . . . . . . . . . . 20
Layco Systems by Yargus. . . . . . . . . . . . . . . . . . . . . . 74
NH3 Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Speed King. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
NH3 Hose Clamps & Hose Couplers. . . . . . . . . . . . . . 25
ACME Fittings & Couplers . . . . . . . . . . . . . . . . . . . . . 26
Steel Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Service
Storage Tank Components. . . . . . . . . . . . . . . . . . . . . 31
Storage Tank & Safety. . . . . . . . . . . . . . . . . . . . . . . . 32
Service Department. . . . . . . . . . . . . . . . . . . . . . . . . . 81
Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Certifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Air Actuators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
TDU Air Shutdown System. . . . . . . . . . . . . . . . . . . . . 40
BaseStation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
NH3 Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
LC Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
notes:
Terms and Conditions
Payment DyTerra accepts cash, Visa and MasterCard. Visa and MasterCard payments are due upon receipt of invoice. Sales to approved charge accounts are due net 30
days from date of invoice and must be paid by cash, cheque or Interac. If charge account payment is received by Visa or MasterCard, a 2% service charge recovery fee will be
added to the invoice. A service charge of 2% per month will be charged on all overdue accounts.
Shipping We ship by standard courier and trucking companies. We do not ship via Parcel Post. We will do our best to ship orders received by 1:00 PM on the day the order
was placed. Our shipments are carefully packed and inspected by the freight company prior to shipping. It is the receiver's responsibility to check all shipments immediately
for damage or shortages. It is the receiver's responsibility to report any damage or any shortages to the freight company and DyTerra within 24 hours of receipt.
Pricing All prices are subject to change without notice. Applicable taxes are extra. Quotations are made for immediate acceptance unless otherwise stated. Please phone
to verify pricing as foreign exchange and volatile raw material costs may change product pricing.
Returns Returns are only accepted within 30 days. Returns will not be accepted for any reason without prior approval and a valid Returned Goods Authorization (RGA)
number issued from a DyTerra employee. If you receive authorization for a return, an applicable restocking charge will apply to recover the entire cost of the return. Item must
be returned freight prepaid and a copy of the original invoice must accompany the shipment. Special orders are not returnable.
Warranty All products sold by DyTerra are covered by the warranties expressed by individual manufacturers. DyTerra offers no warranty beyond the manufacturers and
assumes no liability for consequential damages. Purchaser accepts these terms and warranty limitations before using any products.
Manifolds and Splitters
anhydrous ammonia
Impellicone Manifold
The Impellicone can be used for all NH3 applications at high or
low rates, while also offering the flexibility to plug unused outlets
without sacrificing accuracy. The Impellicone's superior accuracy
allows better control of targeted rates without comprimising
distribution accuracy, which greatly reduces the over application of
NH3. Available in 13-port and 18-port models, the Impellicone is
the recommended manifold when considering section shutoff and
variable rate application.
PARTDESCRIPTION
JBIP1300
Manifold 13-Port Impellicone
JBIP1800
Manifold 18-Port Impellicone
CTA-1138
Hosebarb ½" Hose x ¼" MNPT
CTA-1132Hosebarb 3 ⁄ 8" Hose x ¼" MNPT
FT04PF
Plug ¼" FS
FT16N96XH
Nipple, 1" x 6"
Continental MVD Manifold
PARTDESCRIPTION
CTA-MVD-16B120
MVD Manifold Assembly Body and 16-Port Ring
CTA-MVD
Body Only MVD Manifold
CTMVD-R-16U120
Ring Only, 16 Port
MIMS24
Manifold Stand
MIUB4SQ
U-Bolt for Stand (One Req)
CTA-6135Plug 1 ⁄ 8"
CTA-MVD-RK
Repair Kit MVD Manifold
Impellicone Accessories
PARTDESCRIPTION
PGA604L
PGA604
MIMSIMP
MIUB4SQ
Gauge Liquid 0-60 PSI
Dry Gauge 0-60 PSI
Impellicone Stand
U Bolt for Stand (2 Req.)
CDS-John Blue Impellicone Splitter
Squibb Taylor Equa-Flo Splitter
Continental Splitter
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
JBIPS2-4
JBIPS2-6
STA-SVD-3
STA-SVD-4
STA-SVD-5
MISS4
MIUB4SQ
CTA-SVD-6
CTA-SVD-7
MISS4 MIUB4SQ
ft12k12s
Splitter 4-Way Impellicone
Splitter 6-Way Impellicone
1¼" Inlet x 1" Outlet
Outlets are pluggable
Splitter 3-Way Squibb
Stand Manifold/Splitter
U-Bolt Square 3 ⁄ 8" x 4" x 5"
Splitter 6-Way Continental
Splitter 7-Way Continental
Splitter Stand
U-Bolt Square 3 ⁄ 8" x 4" x 5"
King Nipple ¾" MPT x ¾" Hose
Headingley, MB: 204-885-8260 Saskatoon, SK: 306-244-4448 Calgary, AB: 403-236-3378 Ayr, ON: 519-740-7188
3
Impellicone Manifold Kits - Section Control
CDS-John Blue Impellicone NH3 Kits
PARTDESCRIPTION
anhydrous ammonia
KTIMP-2-26SC
KTIMP-2-36SC
KTIMP-3-39SC
KTIMP-3-54SC
KTIMP-4-52SC
KTIMP-4-72SC
KTIMP-5-65SC
KTIMP-5-90SC
KTIMP-6-78SC
KTIMP-6-108SC
KTIMP-7-91SC
KTIMP-8-104SC
2-Way Impellicone Kit
KIT
#OF MANIFOLDS
SECTION CONTROL
KT IMP -4- 52 SC 3/8
IMPELLICONE
#OF RUNS
HOSE SIZE
Impellicone Manifolds are available in 13 Port and 18 Port Models
EVA Hose from Manifolds to Shanks is available in ½", 3 ⁄ 8" & ¼"
KIT INCLUDES:
Manifolds with Mounting Hardware and Hosebarbs
Splitter with Mounting Hardware
Flomax Breakaway Coupler with E-Z Bracket
1¼" NH3 Hose from Breakaway to Cooler / Cooler to Splitter
Pressure Gauge
Reusable Hose Clamps
Raven On/Off Valves
Extension Harnesses for Raven On/Off Valves
Thread Tape / Pipe Sealant
All Required Pipe Fittings and Plugs
DOES NOT INCLUDE:
High Pressure 3/4" Nylon Braid NH3 Hose from Splitter to Manifolds (order exact lengths once kit is installed)
Knives, Shanks, NH3 Tubes or Clips
FOR MAXIMUM ROW TO ROW ACCURACY:
KEEP HOSES BETWEEN THE SPLITTER AND MANIFOLDS THE SAME LENGTH
KEEP HOSES FROM THE MANIFOLDS TO THE SHANKS THE SAME LENGTH
4
www.dyterra.com info@dyterra.com
Impellicone Manifold Kits - Standard
CDS-John Blue Impellicone NH3 Kits
PARTDESCRIPTION
KIT
#OF MANIFOLDS
anhydrous ammonia
KTIMP-2-26
KTIMP-2-36
KTIMP-3-39
KTIMP-3-54
KTIMP-4-52
KTIMP-4-72
KTIMP-5-65
KTIMP-5-90
KTIMP-6-78
KTIMP-6-108
KTIMP-7-91
KTIMP-8-104
HOSE SIZE
KT IMP -3- 39 3/8
IMPELLICONE
#OF RUNS
Impellicone Manifolds are available in 13 Port and 18 Port Models
EVA Hose from Manifolds to Shanks is available in ½", 3 ⁄ 8" & ¼"
KIT INCLUDES:
Manifolds with Mounting Hardware
Splitter with Mounting Hardware
Flomax Breakaway Coupler with E-Z Bracket
1¼" NH3 Hose from Breakaway to Cooler
EVA Hose from Cooler to Splitter / Splitter to Manifolds
EVA Hose from Manifolds to Shanks
Pressure Gauge
Reusable Hose Clamps
Thread Tape / Pipe Sealant
All Required Pipe Fittings
DOES NOT INCLUDE:
Knives, Shanks, NH3 Tubes, Clips, etc.
FOR MAXIMUM ROW TO ROW ACCURACY:
KEEP HOSES BETWEEN THE SPLITTER AND MANIFOLDS THE SAME LENGTH
KEEP HOSES FROM THE MANIFOLDS TO THE SHANKS THE SAME LENGTH
5
Raven AccuFlow™ Vortex Cooler
Capacity
· Increased
Rated at 50GPM, the Raven Vortex outperforms even dual cooler setups.
Footprint
· Smaller
Requires half the space required for a dual cooler setup on the toolbar.
anhydrous ammonia
Safety
· Increased
Improved bleed-off system allows for safer bleed downs in half the time than a standard AccuFlow.
Servicability
· Increased
Redesigned flow meter with Gruv-Lok connections can be changed in 10 minutes.
·ISObus Compatible
Dual Inlet shown. Single Inlet also available.
Raven Vortex
ISO Cabling
PARTDESCRIPTION
PARTDESCRIPTION
RVI-117-0171-574
RVI-117-0171-591
RVI-334-0002-005
RVI-063-0173-618
RVI-117-0171-590
RVI-063-0173-062
RVI-333-0006-032
RVI-116-0159-743
RVI-417-0001-031
RVI-417-0001-030
RVI-422-0000-090
RVI-063-0173-668
RVI-063-0173-665
RVI-063-0173-667
RVI-063-0173-664 RVI-117-5300-001
RVI-117-5300-002
Raven Vortex 2-Valve System, 1¼" valves
Seal Hardware Kit
Relief Valve
RFM 60SG Flow Meter
RFM 60SG Internal Replacement Parts Kit
Flow Meter Sensor Assembly w/Nut
2" x 1½" Gruv-Lok Coupling w/Gasket
1½" SS Gauge Tree Manifiold
0-250 PSI Pressure Gauge
-40F - 120F Temperature Gauge
0-250 PSI Pressure Transducer
1½" On/Off Valve Assembly
On/Off Motor Assembly
1½" Standard Control Valve
Standard Control Valve Assembly
Kit Includes:
Pre-assembled Vortex Cooler
1½" Standard Port Valves
Stainless Steel 1½" Flow Meter with Gruv-Lok Connections
Liquid-filled Pressure Gauge
Sealed Temperature Gauge
Vapour Tube Kit
Ball Valve
Strainer
For RAVEN troubleshooting, turn to page 11
6
3 Section Can Control Node Kit
6 Section Can Control Node Kit
Raven AccuFlow Cooler with Raven Valves
PARTDESCRIPTION
KTRV30NH3-2 AccuFlow System 2-Valve C/W Raven SCS 440
KTRV30NH3-2LC AccuFlow System 2-Valve (Less Console)
Recommended for rates up to 6500#/HR 30 GPM
Kit Includes:
Raven AccuFlow Cooler
1¼" On/Off Valve
1¼" Control Valve
Raven Flow meter
All Required Wiring Harnesses
SCS 440 Console (if required)
anhydrous ammonia
Raven NH3 Cooler Kits
Continental Super Flow Cooler
with Raven Valves
The Continental Super Flow mounts upright, taking up less
space on the toolbar. This kit is available less the cooler for
a producer wishing to upgrade their existing Super Flow.
PARTDESCRIPTION
Strainer & Fittings
Ball Valve
Pressure Gauge
Temperature Gauge
Vapour Tube Kit
nh3 facts
KTRVS-2
KTRVSF-2LSF
Continental Super Flow Kit with 2 Raven Valves
Continental Super Flow Kit with 2 Raven Valves
(Less Cooler)
Recommended for rates up to 6500#/HR (if required)
Kit Includes:
1¼" On/Off Valve
1¼" Control Valve
Raven Flow meter
All Required Wiring Harnesses
SCS 440 Console (if required)
Strainer & Fittings
Ball Valve
Vapour Tube Kit (if required)
Total Pounds Actual Nitrogen Per Hour: Desired Lbs x Implement Width (ft.) x Speed (MPH) x 0.1212
Total Pounds Per Minute: Lbs. Per Hour / 60
Gallons Per Minute: Pounds nitrogen per hour x 0.004
Total Pounds of N Per Manifold Outlet Per Hour: Lbs Actual Per Hour / Number of Runs
NH3 Vapour Pressure Approximate Temperature
°F
°CPressure PSIG
-20.0-28.9
3
0.0-17.8
15
10.0-12.2
23
20.0-6.7
33
30.0-1.1
45
40.04.4
58
50.010.0
74
60.015.6
92
70.021.1
114
90.032.2
165
For RAVEN troubleshooting, turn to page 11
7
Raven SCS 440 AccuFlow Single Section
Main Raven Harnesses
PARTDESCRIPTION
RV1-115-0171-085
RV1-115-0159-857
RV1-115-0171-800
Console Cable
Extension Harness 24ft
Flow Cable
anhydrous ammonia
Raven Valves
PARTDESCRIPTION
RV1-063-0172-977
RV1-063-0172-978
RV1-063-0173-202
RV1-063-0173-203
8
Control Valve 1"
On/Off Valve 1" (Boom Control Valve)
Control Valve 1¼"
On/Off Valve 1¼" (Not for Boom Control)
Raven SCS 440 Two Valve Multi-Section
3 Section Raven Harnesses
On/Off Valve Extension Harnesses
PARTDESCRIPTION
PARTDESCRIPTION
RV1-115-0171-085
RV1-115-0171-857
RV1-115-0171-836
RV1-115-0171-837
RV1-115-0171-832
RV1-115-0171-833
RV1-115-0171-834
Console Cable
Flow Cable 3 Section
Flow Cable 3 Section, Plugs into J.D.R.C.
On/Off Valve Extension 6ft
anhydrous ammonia
6 Section Raven Harnesses
PARTDESCRIPTION
RV1-115-0171-085
RV1-115-0171-841
RV1-115-0171-844
RV1-115-0171-838
RV1-115-0171-839
Console Cable
Power Cable (Required for 4 or more Sections)
Flow Cable 6 Section
Flow Cable 6 Section, Plugs into J.D.R.C.
Raven Valves
PARTDESCRIPTION
RV1-063-0172-977
RV1-063-0172-978
RV1-063-0173-202
RV1-063-0173-203
Control Valve 1"
On/Off Valve 1" (Boom Control Valve only)
Control Valve 1¼"
On/Off Valve 1¼" (Not for Boom Control)
9
Raven NH3
Speed Control
anhydrous ammonia
PARTDESCRIPTION
Raven SCS Console
PARTDESCRIPTION
RV1-063-0171-183
RV1-063-0171-220
Raven SCS 440 Console Kit 3 Boom
Raven SCS 450 Console 6 Boom
RV1-117-0171-165
RV1-117-0159-822
RV1-115-0159-709
RV1-115-0171-304
RV1-115-0159-700
Raven Phoenix 10 GPS Speed Sensor
Raven Radar Kit
Y Cable - Radar (Ford, Versitile)
Y Cable - Radar (Case MX, STX)
Y Cable - Radar (John Deere 8000/9000)
Raven Replacement Parts
PARTDESCRIPTION
Raven On/Off Valves
PARTDESCRIPTION
RV1-063-0172-977
RV1-063-0172-978
RV1-117-0159-410
RV1-063-0172-979
RV1-063-0173-202
RV1-063-0173-203
RV1-115-0171-807
RV1-115-0171-808
1" Control Valve
1" On/Off Valve
Repair Kit 1" Raven Valve
Fast Valve
1¼" Control Valve
1¼" On/Off Valve
Cable Adapter Fast Valve & Control Valve
Cable Adapter On/Off Valve
Raven Valve Repair Kits
PARTDESCRIPTION
RV1-117-0159-410
RV1-117-0171-355
Repair Kit, 1" Raven Valve
Repair Kit, 1¼" Raven Valve
3
10
RV1-063-0171-666
RV1-063-0171-669
RV1-117-0171-410
RV1-063-0173-030
RV1-417-0001-009
RV1-417-0001-008
Raven Stainless Steel Flow Meter RFM60S 1"
Raven Flow meter Sensor
Raven Vapour Tube Kit ½"
Raven Back Check Valve 1¼"
Temperature Gauge
Pressure Gauge
Raven Flow Meter Breakdown
ITEMPART
DESCRIPTION
1
2
3
4
5
6
7
Body, RFM 60s Flow meter
Rotor/Magnet Assembly
Hub/Bearing Assy, Upstream
Hub/Bearing Assy, Downstream
Ring, Retaining, Internal
Stud Bearing
Sensor Assembly
RVI-107-0171-246
RVI-063-0171-673
RVI-063-0171-674
RVI-063-0171-769
RVI-335-0000-278
RVI-063-0173-062
RVI-063-0171-669
raven TROUBLESHOOTING GUIDE
Problem
Probable Cause & Corrective Action
1. Rate display is inaccurate
or unstable.
1. Check to see if your strainer is plugged.
2. Verify that there is product being discharged from each of the vapour tubes – If not,
disassemble and clean out your supercooler with compressed air.
3. Unplug, Check and reconnect all wiring harnesses – Just one corroded pin or loose
connection could cause the system to malfunction.
4. Test Your Flow Cable – (See Fig. 2 on next page) Ensure that power is actually getting to your
flow meter by testing for the required voltages. If no power can be found, check connections
or replace your flow cable. If there is power at your flow cable, replace your flow sensor.
5. Replace your flow sensor – The black wire connected to your flow meter is called the flow
sensor. Remove the old sensor and thread in the new sensor, making sure to follow the
installation instructions. No calibration changes are required.
6. Replace your flow meter – If you are still having issues after replacing the flow sensor, the
turbine inside your Flow meter may have burnt out. Flow meter replacement parts are
on page 10.
2. Rate does not change in either
manual or automatic control modes.
1. Check the control valve cabling for wear or breaks.
2. Check and clean cable connections.
3. Check the voltage at the control valve: (see Fig. 1)
4. Power on the console.
5. Set the master switch on the console to “On”.
6. Set the console to “Manual” mode.
Troubleshooting
7. Hold the Increase/Decrease switch while testing voltage at the flow cable.
8. If voltage is found, plug the control valve back in.
9. If the valve will not turn while holding the Increase/Decrease Switch, replace the valve.
3. Are you still having issues?
The flow of NH3 through your metering system is solely controlled by tank pressure. When
applying in colder temperatures, tank pressure will drop. If tank pressure drops too low, your
cooler will be starved for product, which causes rates to fluctuate. Your options are to slow down
or try the following:
1. Increase plumbing size from tank.
2. Upgrade to a high flow breakaway.
3. Use a larger nurse tank with a high-flow withdrawal.
4. Upgrade to a higher capacity supercooler.
Fig. 1
On/Off Valve Connection - Tractor Side
control Valve Connection - Tractor Side
11
Fig. 2
procedure to test flow meter cables:
1. Disconnect cable from flow sensor.
2. Hold flow sensor cable so that the keyway is pointing to the 12 o’clock position:
KEYWAY
10 O'CLOCK
2 O'CLOCK
6 O'CLOCK
Pin Designations
2 o’clock socket location is ground.
10 o’clocksocket loaction is power.
6 o’clock socket loaction is signal.
Voltage Readings
a) 2 o’clock socket to 6 o’clock socket = +5 VDC
b) 2 o’clock socket to 10 o’clock socket = +5 VDC
Troubleshooting
procedure to test flow cable:
1.
2.
3.
4.
5.
6.
7.
Enter a meter cal number of 1 in the key labelled METER CAL.
Depress key labelled TOTAL VOLUME.
Place boom switches to ON.
With a small jumper wire, short between the 2 o’clock and 6 o’clock sockets with a “Short, No Short” motion.
Each time a contact is made, the TOTAL VOLUME should increase by increments of 1 or more counts.
If TOTAL VOLUME does not increase, remove the section of cable and repeat test at the connector next closest
to the console. Replace defective cables as required.
Perform the above voltage checks.
If all cables test properly, replace the flow sensor.
Note: After testing is complete, re-enter correct METER CAL numbers before application.
12
Capstan
N-Ject
As the most advanced and reliable NH3 application system available on the market, the N-Ject NH3 system provides
precise row-by-row uniformity with less than six percent distribution error.
N-Ject Installation Parts
itempart DESCRIPTION
part description
1
1A
2
3
4
5
6
7
Coil Assy, 7-Watt, Overmolded
Coil Assy, 12W, OM
Plunger Assy, Teflon
O-Ring, 015 BUNA N
Pressure Sensor, 50 PSI Non-vented
Pressure Sensor, 250 PSI Non-vented
Pressure Gauge, 0-400 PSI
Pressure Gauge, 0-60 PSI
K TNJPP
CA116189-111 CA625147-011 CA716190-001 CA621022-204 CA620162-050 CA620120-250 CA620125-001 CA620-124-001 anhydrous ammonia
N-Ject Manifold Parts
N-Ject Installation Parts Package
Kit Includes:
Hoseclamps
Mounting Hardware
Ball Valves
Breakaway w/Bracket
Required Fittings
HOW N-JECT NH3 WORKS
Warm NH3 liquid and vapour enter from the tank, pass
through the screen, and enter the inlet chamber.
NH3 leaves the outlet tube and is routed
to the knife for application to field.
NH3 liquid vapourizes in the outlet passage
causing the cooling tubes to get very cold.
The nozzle-valve pulses open to allow the correct
amount of NH3 into the outlet passage.
Gravity helps to separate vapour from liquid.
NH3 passes between cooling tubes to
condense vapour into liquid.
Super cooled NH3 liquid enters the rail
passage ready for metering.
13
Dickey-John Wiring
Land Manager 1
LM1 Cables
PARTDESCRIPTION
DJ466391003S1
DJ466391090S1
DJ466391030S1
anhydrous ammonia
J2
RS 232
Connector
Connects to
PC/Printer
J1
Ground Wire
(Connected to Mounting
Bracket Screw)
Yellow
Second battery
cable supplies
actuator power
Harness, Main LM1, J1 (Long)
Harness Power LM1, J2
Harness, Implement LM1
External
Alarm
Master Switch Module
Gnd Speed Sensor
Radar Ground
Speed Sensor
Radar connector for alternate location
on Tractor Harness 46639-1030
(Not on Truck harness 46639-1081)
Battery
Sensor
Junct
Actuator
Valve Actuator
FQ Sensor
Analog Sensor
Flow meter
Digital 1 Sensor
PQ Sensor
Digital 2 Sensor
Implement Switch
CCS100 and CMS100
DJCCS100
Console
DJ46429-0140
CCS 100 Cables
PARTDESCRIPTION
DJCMS100
Console
DJ457901892
DJ457901891S1
DJ45790 2770S1
6' Cable + 12 Volts Switched from Ignition
Red
Boom Section
Shutoff Input
Y Cable
Main Harness
DJ45790-1892
Switch Module
Radar II Ground Speed Sensor
12V
Battery
Optional Lift Switch
To Implement Harness
For DICKEY-JOHN troubleshooting, turn to page 16
14
Control Valve
Implement
Harness
Harness, Main for CCS & LMSE
Harness Implement - CCS & LMSE
Harness Main Extension
DJ45790-1891S1
Not Used
Optional
Vapour
Detector
Dickey-John NH3
PART
PART
PART
CTA-SF-3000
DJ467095060
Dickey-John Actuator
DJ457901570AS1
Flow Sensor Module
CTA-BVT
1¼" Continental BVT Valve
Recommended for rates up to 6500 #N/HR
Required when upgrading to a CTA-BVT valve
REPAIR KIT: CTA-SF-RK
HARDWARE KIT: KZEH4HDW
Requires D5457904000 to
connect to BVT valve
anhydrous ammonia
PART
REPAIR KIT: CTA-BVT-RK
PART
PART
PART
PART
DJ467831000S9
Dickey-John Radar Kit
DJ466050030
Module Switch, LM1
DJ457901610S1
Flow Meter (Complete)
RVI-117-0171-165
Raven Phoenix 10 GPS
RVSSDJ
Cable, Raven Speed Sensor
to DJ Harness
Dickey-John CCS 100
The Dickey-John CCS 100 has been discontinued, but can be replaced with a Land Manager Upgrade Kit.
If you have this
you need this
Common CCS 100 Replacement Parts
PARTDESCRIPTION
DJLM/CCSRETRO
DJ457902320S1
CCS to LM1 Upgrade Kit
Flush Switch, CCS
PART
DJ466390025S1
Console, Land Manager 1
CCS 100
LM1
For DICKEY-JOHN troubleshooting, turn to page 16
15
dickey-john TROUBLESHOOTING GUIDE
Problem
Probable Cause & Corrective Action
1. Rate display is inaccurate
or unstable.
This is a Dickey-John Flow Sensor. (Fig.1) Usually a faulty flow sensor is responsible for this issue,
but before replacing the flow sensor, try the following:
1.Check to see if your strainer is plugged. (Fig. 2)
2.Check the opening on your Continental cooler. There is a small 3/8” hosebarb in the elbow after
your control valve. Remove the barb and make sure it’s not plugged. (Fig.3)
3.Verify that there is product being discharged from each of the vapour tubes – If not,
disassemble and clean out your supercooler with compressed air.
4.Unplug, check and reconnect all wiring harnesses – just one corroded pin, or loose
connection could cause the system to malfunction.
5.Check the voltage on the tractor side of the flow sensor connection.
Voltage should read 12V across red and black 9V across black and green (Fig.4)
Power at flow sensor:
Black + Red 12V
Black + Green 9V
6. If there is no voltage, you have a faulty cable or connection.
Check or replace implement harness.
7. If there is voltage, remove the flow sensor and check to see that the paddle wheel inside the
flow meter is spinning freely. If the paddle wheel spins freely inside the flow meter,
replace the flow sensor.
Troubleshooting
2. Control Valve will not
operate in auto.
Does the Valve Operate in Flush? If it does, check your speed cable connections. If it doesn’t, test
the voltage on the tractor side of the control valve connection (Fig. 5)
Power at Actuator Connection:
Red + Black 12V Always
Black + White 12V Flush Switch Off
Black + Brown 12V Flush Switch On
3. Are you still having issues?
The flow of NH3 through your metering system is solely controlled by tank pressure. When
applying in colder temperatures, tank pressure will drop. If tank pressure drops too low, your
cooler will be starved for product, which causes rates to fluctuate. Your options are to slow down
or try the following:
1. Increase plumbing size from tank.
2. Upgrade to a high flow breakaway.
3. Use a larger nurse tank with a high-flow withdrawal.
4. Upgrade to a higher capacity supercooler.
Fig. 1
16
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Manual Meters
Use this calculation to determine which meter is best for your applicator:
DESIRED #N X WIDTH IN FEET X MPH X .1212 = # ACTUAL N PER HOUR
B9500 Manual Meter Kit
C4100 Manual Meter
Kit includes: 1¼" Coupling, 1¼" x 1" Reducer, Meter Stand w/ U-Bolt
PARTDESCRIPTION
KTB-9500-B
Meter Kit B9500 Hydraulic S/O
KTB-9500-ESO Meter Kit B9500 Electric S/O
CTA-RTS-16A Remote S/O Switch B9500 Electric S/O
REPAIR KIT: CTB-9500-RS
anhydrous ammonia
Kit includes: 1" Nipple Ring, 1¼" x 1" Reducer,
Meter Stand with U-Bolt
PARTDESCRIPTION
KTCTC4103-6572
Meter C4103 C/W HYD. Shut-off
METER REPAIR KIT: CTA-4125-RS
SHUTOFF REPAIR KIT: CTR-6572-RK
Hydraulic Shutoff
PARTDESCRIPTION
CTR-9590
Shutoff Hydraulic In-Line 1"
REPAIR KIT: CTR-9590RK
17
Flo-Max Breakaway
1¼" Flo-Max Kit
1½" Flo-Max Kit
PARTdescription
PARTdescription
STFM126K
STFM150K
Flo-Max Breakaway Kit 1¼" (Less Bracket)
Kit Includes:
Kit Includes:
anhydrous ammonia
Breakaway
2 x ¼" Bleeders
1 x Hydrostat
1 x Acme Adaptor
1 x Reducer Bushing
1 x Acme Cap
1 x Hydrostat
Breakaway
1½" E-Z Bracket 1 x Acme Adaptor
2 x ¼" Bleeders 1 x Acme Cap
1¼" Flo-Max E-Z Bracket Only
1½" Flo-Max E-Z Bracket Only
PARTdescription
PARTdescription
STFM126-1500
STFM150-1001
E-Z Bracket 1¼"
E-Z Bracket 1½"
1¼" Flo-Max Female Half
1½" Flo-Max Female Half
PARTdescription
PARTdescription
STFM126-1100
STFM150-1100
Female Half
Female Half
1¼" Flo-Max Male Half
1½" Flo-Max Male Half
PARTdescription
PARTdescription
STFM126-1200
STFM150-1200 Male Half
Male Half
1¼" Flo-Max Male Insert
1½" Flo-Max Male Insert
PARTdescription
PARTdescription
STFM125-5003
STFMQR
STFM108-2003 STFM150-5003
STP5-304-RO
ST110-2003 Flo-Max Male Insert (Less O-Rings)
Quad Ring - Male Tip
O-Ring - Male Tip
Flo-Max Male Insert (Less O-Rings)
Quad Ring, Male Tip 1½"
O-Ring, Male Tip 1½"
1¼" Flo-Max Repair Kit
1½" Flo-Max Repair Kit
PARTdescription
PARTdescription
STFM125-0022
STFM125-0024
STFM150-0022 Repair Kit Flo-Max c/w Tool Assembly
STFM150-0024 Repair Kit (O-Rings only)
Repair Kit Flo-Max
c/w Tool Assembly
Repair Kit (O-Rings only)
reminder: Change O-Rings Annually
RB Breakaway Repair Kits
PARTDESCRIPTION
STRB1-0024
STRBOK-1
STRBOK-125
STRB1.25-0024
18
Flo-Max Breakaway Kit (C/W Bracket)
Repair Kit 1" RB (OEM)
O-Ring Kit 1" RB Coupling
O Ring Kit 1¼" RB Coupling
Repair Kit, 1¼" RB (OEM)
RB Breakaway (Discontinued)
Air Drill Kit & Cushion hitches
anhydrous ammonia
Existing Breakaway
KTASK20 1¼" Air Drill Kit
Includes: 1¼" Flo-Max Breakaway, 1¼" Hose Clamp, 1¼" x 13 ⁄4" ACME Hose Coupler
Note: used for tow behind air drill carts.
Existing Breakaway
KTASK24 1½" Air Drill Kit
Includes: 1½" Flo-Max Breakaway, 1½" Hose Clamp, 1¼" x 2¼" ACME Hose Coupler
KTASK kits do not include hose. DyTerra can supply a custom length for your drill.
An inline ball valve at the back of your applicator will allow you to change NH3 tanks in the field without having to bleed
down your entire system.
Optional Equipment
Schuck Cushion Hitch
PARTDESCRIPTION
PARTDESCRIPTION
BVSS203
FT20N32XH
BVSS24
FT24N32XH
MI750RTR
M1750RT
MISK17006
1¼" nipple
1¼" x 2" nipple
1½" ball valve
1½" x 2" nipple
Receiver Cushion Hitch High-Rider 3½" Drop
Receiver Cushion Hitch Low-Rider 5½" Drop
Spring Set SS Cushion Hitch (set of 2)
19
NH3 Tanks & Wagons
Call DyTerra Today to Request a Quote
anhydrous ammonia
DyTerra Twin 2000 Gallon with Extreme Flow Package
FEATURES:
n
n
n
n
1½" Centre Withdrawal
1¼" Centre and Front Withdrawal
Heavy Duty Scraper Style Gooseneck
Duo-Lift LB4400 Lowboy Wagon
n
n
n
n
1¼" Rear Fill
1¼" Centre and Front Withdrawal
1¼" Fill Valves
1¼" and 1½" Plumbing Packages Available
DyTerra 8100 Gallon Delivery Unit
FEATURES:
n
n
n
n
n
20
Made in Canada to Transport Canada Specifications
3” Base Mount Pump with Delivery Rates at well over 100 GPM
Completely Self-Contained with Fuel Injected Gas Engine & Electric Clutch Drive
2” Flanged Mass Flow Meter or 3” LC Meter for High Speed Delivery
74” Diameter for Low Centre of Gravity
NH3 Tanks & Wagons
Call DyTerra Today to Request a Quote
anhydrous ammonia
DyTerra 2000 Gallon with Extreme Flow Package
FEATURES:
n
n
n
1½" Center Withdrawal
1¼" Center and Front Withdrawal
1¼" Rear Fill
n
n
Rocking Front Bolster Suspension
Duo-Lift M21000C Wagon with Offset Wheel Tracking
DyTerra 2400 Gallon with Extreme Flow Package
FEATURES:
n
n
n
n
2" Center Withdrawal
1½" Center Withdrawal
1½" Center Spray Fill with 2" Standpipe for faster filling
1¼" Front Withdrawal
n
n
n
n
1¼" Rear Fill
Rocking Front Bolster Suspension
Duo-Lift M2400C
Wagon with Offset Wheel Tracking, 90" Front x 120" Rear
21
DyTerra Extreme Flow Package
DyTerra's Extreme Flow cold weather application package delivers more product to the field for higher speeds and higher
rates, especially at lower temperatures.
anhydrous ammonia
1¼" Hose End Valve
1½" Hose End Valve
PARTDESCRIPTION
PARTDESCRIPTION
STA1527
KTVG24STO
STA1529
KTVG24STO
Valve/Speedy Coupler 1¼" x 2¼"
Valve Guard STA1527, STA1529 C/W U-Bolt
1¼" Hose and Reusable Hose Clamps
1½" Hose and Reusable Hose Clamps
PARTDESCRIPTION
PARTDESCRIPTION
ME3162-20
Reusable Hose Clamp 1¼" x 1¼"
ME3162-2020S Clamp 2¼" F ACME x 1¼" Hose
HSN259520
Hose NH3 1¼" Stainless Steel Braid (8 Year)
ME3162-24
ME3162-24S
HSN259524
1¼" Withdrawal Valve
1½" Withdrawal Valve
PARTDESCRIPTION
PARTDESCRIPTION
STA484N-45
STA482N-60
Valve Withdrawal Top/Bottom 1¼"
Reusable Hose Clamp 1¼" x 1½"
Clamp 2¼" F ACME x 1½" Hose
Hose NH3 1½" Stainless Steel Braid (8 Year)
Valve Withdrawal Top/Bottom 1½"
1¼" x 2¼" Hardware
1½" x 2¼" Hardware
PARTDESCRIPTION
PARTDESCRIPTION
STA2060S
STA2077
Adapter 1¼" MNPT x 2¼" M ACME
Withdrawal Valve
Adapter 1½" MNPT x 2¼" M ACME
Hose End Valve & Valveguard
Hardware & Hose
22
Valve/Speedy Coupler 1½" x 2¼"
Valve Guard STA1527, STA1529 C/W U-Bolt
NH3 Hose
ALL HOSE MEASURED BY INNER DIAMETER
One of the most important considerations for a proper installation is the withdrawal line plumbing from the nurse tank to
the cooler or pump. Consider the following to ensure you are achieving optimal flow rates:
n
n
n
n
n
Use ISC valves or high flow withdrawal valves in nurse tank outlet
Use minimum 1¼" hose in place of 1" hose
1¼" hose has 56% more capacity than 1" hose
1½" hose has two-times the capacity of 1¼" hose
Ensure inlet plumbing from the nurse tank is as short as possible
Stainless Steel Anhydrous Hose (Grey Stripe)
Nylon Braided Anhydrous Hose (Green Stripe)
PARTDESCRIPTION
PARTDESCRIPTION
HSN144608
HSN259512
HSN259516
HSN259520
HSN259524
HSN259532
HSN144648
Hose NH3 ½" SS Braid
Hose NH3 ¾" SS Braid
Hose NH3 1" SS Braid
Hose NH3 1¼" SS Braid
Hose NH3 1½" SS Braid
10 Year
8 Year
8 Year
8 Year
8 Year
8 Year
10 Year
HSN200008
HSN200012
HSN200016
HSN200020
HSN200024
Hose NH3 ½" SS Braid
Hose NH3 ¾" SS Braid
Hose NH3 1¼" SS Braid
Hose NH3 1½" SS Braid
anhydrous ammonia
6 Year
6 Year
6 Year
6 Year
6 Year
EVA Tubing
A flexible ethyl vinyl tubing is used for applying NH3, aqua ammonia,
herbicides and all liquid fertilizers. The addition of carbon black as a
UV stabilizer greatly increases life expectancy and lets you check for
frosting quickly and easily.
PARTDESCRIPTION
HSEVA04250
HSEVA06250
HSEVA08250
HSEVA1225
HSEVA12100
HSEVA16R50
EVA Tubing ¼" - 250' Roll
EVA Tubing 3 ⁄ 8" - 250' Roll
EVA Tubing ½" - 250' Roll
EVA Tubing ¾" - 25' Roll
EVA Tubing ¾" - 100' Roll
EVA Tubing 1" - 50' Roll (Reinforced)
23
Knives, Tubes & Shanks
anhydrous ammonia
Shanks
Ray Mac Tubes
PARTDESCRIPTION
MICP08
MICP06
Applicator Tube ½" Pipe
Applicator Tube 3 ⁄ 8" Pipe
PARTDESCRIPTION
MIKSC-95
MIKSC-96
Coil-Shank 6" Bar
Coil-Shank 4" Bar
Accessories
PARTDESCRIPTION
MIKSC-384ILollipop
MIKSC-TP96
Top Plate 6"
MIKSC-TP64
Top Plate 4"
Side Mount Knives
PARTDESCRIPTION
1"
MIA50UVX204X Knife Side Mount c/w ½" Tube
MIA50UVX1104 Knife Side Mount c/w 3 ⁄ 8" Tube
¾"
30˚
25¼"
½"
1½"
KSC-95
REF
12 3 4
Dimensions 13" 20" 4½"2¾"
Hose Clips
PARTDESCRIPTION
MICPB-2-4-08
MICPB-2-4-06
Hose Clip ½"
Hose Clip 3 ⁄ 8"
1"
¾"
30˚
23¼"
Chisel Plow Knife
24
1½"
KSC-96
PARTDESCRIPTION
REF
1
MICP7025
Dimensions
11¼" 20"
Knife, Chisel Plow ½"
2
3
4
4½"
2¾"
NH3 Hose clamps & Hose Couplers
Hose clamps
PART
PART
PART
PART
ME3162-08
Clamp, Reusable
½" MNPT x ½" Hose
ME3162-12
Clamp, Reusable
¾"MNPT x ¾" Hose
ME3162-16
Clamp, Reusable
1" MNPT x 1" Hose
ME3162-20
Clamp, Reusable
1¼" MNPT x 1¼" Hose
ME3162-24
Clamp, Reusable
1½" MNPT x 1½" Hose
PART
ME3162-32
Clamp, Reusable
2" MNPT x 2" Hose
PART
PART
PART
ME3162-48
Clamp, Reusable
3" MNPT x 3" Hose
ME3162-1216
Clamp, Reusable
1" MNPT x ¾" Hose
ME3162-2016
Clamp, Reusable
1" MNPT x 1¼" Hose
anhydrous ammonia
PART
Hose Couplers
PART
PART
PART
ME3162-12S
Clamp, Reusable ¾"Hose X 1¾"F ACME
ME3162-16S
Clamp, Reusable 1"Hose X 1¾"F ACME
ME3162-2018S
Clamp, Reusable 1¼" Hose X 1¾"F ACME
PART
PART
PART
ME3162-2020S
Clamp, Reusable 1¼"Hose X 2¼"F ACME
ME3162-24S
Clamp, Reusable 1½"Hose X 2¼"F ACME
ME3162-32S
Clamp, Reusable 2"Hose X 3¼"F ACME
25
ACME Fittings & Couplers
anhydrous ammonia
PART
PART
PART
PART
STA2002
Adapter 1"MPT x 1¾" M ACME
STA2003S
Adapter 1¼"MPT x 1¾" M ACME
STA2060S
Adapter 1¼"MPT x 2¼" M ACME
STA2063S
Adapter 2"MPT x 3¼" M ACME
PART
PART
PART
PART
ME502S-16/10
Adapter 2" MPT x 2¼" M ACME
CTA-586
ME611S
ME612S
Adapter 1¾" F ACME x 2¼"M ACME Adapter 1¾" M ACME x 2¼"F ACME Adapter 1¾" M ACME x 3¼"F ACME
PART
PART
PART
PART
STA1151F
STA1156FS
STA1157FS
STA1131F
Coupling, Fill 1¾" F ACME x 1" MPT Coupling, Fill 2¼" F ACME x 1¼" MPT Coupling, Fill 3¼" F ACME x 2" MPT Coupler, Speedy 1¾" F ACME x 1" MPT
PART
PART
STA1132F
STA2013S
Coupler, Speedy 2¼" F ACME x 1¼" MPT Adapter 1¾" M ACME x 1" FPT
26
PART
PART
STA2005S
STA2007S
Adapter 1¾" M ACME x 1¾"M ACME Adapter 2¼" M ACME x 2¼"M ACME
ACME Caps & Gaskets
PART
PART
PART
STA2014B
Parking Plug 1¾" ACME
STA2024
Parking Plug 2¼" ACME
STAL109
Hose Swivel 1"
STAL111
Hose Swivel 1¼"
Repair Kit: ST109-0022
Repair Kit: ST111-0022
PART
PART
STA2080C
Cap, Plastic 1¾"
ST1177
Cap, Plastic 2¼"
PART
PART
PART
STA1152C
Cap, Steel 1¾"
STA1175CS
Cap, Steel 2¼"
STA1176CS
Cap, Steel 3¼"
1¾"
ST1102A16
2¼"
3¼"
ST1E8126
ST1E8128
anhydrous ammonia
PART
ACME Gaskets
PARTDESCRIPTION
ST1102A16
ST1E8126
ST1E8128
Gasket 1¾" ACME
Gasket 2¼" ACME
Gasket 3¼" ACME
*All gaskets shown are actual size
27
Bleeders, Gauges & Strainers
anhydrous ammonia
PART
PART
PART
PART
STA1911
Valve, Bleeder, ¼" Knurled
STA1912
Valve, Bleeder ¼" T-Handle
STA1910S
Valve, Bleeder ¼" C/W Tube
MEJ415
Valve, Liquid Level ¾"
PART
PART
PART
PART
PGA400
Gauge 0-400 Dry
PGA400L
Gauge 0-400 Liquid
PGA604
Gauge 0-60 Dry
PGA604L
Gauge 0-60 Liquid
Certified Test Gauges are available on request. Contact DyTerra to place an order.
PART
PART
MIPAGET16-40
MIPAGET20-40
MIPAGET24-40
MIPAGET32-40
28
Strainer 1" 40 Mesh
Strainer 1¼" 40 Mesh
Strainer 1½" 40 Mesh
Strainer 2" 40 Mesh
MIPAGETS16
MIPAGETS20
MIPAGETS24
MIPAGETS32
MIPAGETS48
MIPAGETS20-100
MIPAGETS24-100
MIPAGETS32-100
Strainer 1" 40 Mesh
Strainer 2" 40 Mesh
Strainer 3" 40 Mesh
Strainer 3" 100 Mesh
Relief Valves
PART
PART
PART
CTA-402-250
Valve Relief ¾" 250 PSI
CTA-402-265
Valve Relief ¾" 265 PSI
STA1310A
Valve Relief 1¼" 250 PSI
STA1310B
Valve Relief 1¼" 265 PSI
PART
PART
PART
PART
MEV200FIR/265
Valve, Internal Relief 2" 265PSI
MEV300FIR/265
Valve, Internal Relief 3" 265PSI
For use with: NH3, LPG
RGA8434G
Valve, Internal Relief, 2" 250 PSI
RGA8434N
RGA8436G
Valve, Internal Relief, 3" 250PSI
RGA8436N
anhydrous ammonia
PART
PART
CTA-400-C
Hydrostat, ¼" 350PSI NH3
29
Steel Fittings
Schedule 80 Forged Steel - Threaded
Size
Fitting
anhydrous ammonia
1/4"
1/2"
1"
Coupling
FT04C04F
FT08C08F
FT16C16F
Elbow (90 Deg)
FT04E90F
FT08E90F
Elbow (45 Deg)
N/A
N/A
1¼"
1½"
2"
3" FT20C20F
FT24C24F
FT32C32F
FT48C48F
FT16E90F
FT20E90F
FT24E90F
FT32E90F
FT48E90F
FT16E45F
FT20E45F
FT24E45F
FT32E45F
FT48E45F
Street Elbow (90)
FT04L90F
FT08L90F
FT16L90F
FT20L90F
FT24L90F
FT32L90F
N/A
Reducer Bushing
N/A
FT08B04F
FT16B12F
FT20B16F
FT24B20F
FT32B20F
FT48B32F
Reducer Coupling
N/A
N/A
FT16C12F
FT20C16F
FT24C20F
FT32C20F
FT48C32F
Tee
FT04TF
FT08TF
FT16TF
FT20TF
FT24TF
FT32TF
FT48TF
Nipple - Short
FT04NSPXH
FT08NSPXH
FT16N32XH
FT20N32XH
FT24N32XH
FT32NSPXH
N/A
Nipple - 3"
FT04N48XH
FT08N48XH
FT16N48XH
FT20N48XH
FT24N48XH
FT32N48XH
FT48N48XH
Nipple - 6"
FT04N96XH
FT08N96XH
FT16N96XH
FT20N96XH
FT24N96XH
FT32N96XH
FT48N96XH
Plug
FT04PF
N/A
FT16PF
FT20PF
FT24PF
FT32PF
FT48PF
Schedule 40 Steel Fittings - Welded
Size
Fitting1¼"
2"
3"
4"
Elbow (90 Deg)
FT20E90BW40
FT32E90BW40
FT48E90BW40
FT64E90BW40
Elbow (45 Deg)
FT20E45BW40
FT32E45BW40
FT48E45BW40
FT64E45BW40
Tee
FT20T40
FT32T40
FT48T40
FT64T40
King Nipple
FT20K40
FT32K40
FT48K40
FT64K40
Cap
FT20CPBW40
FT32CPBW40
FT48CPBW40
FT64CPBW40
Schedule 80 Steel Fittings - Welded
Fitting
Size
1¼" 2"
3"
4"
Elbow (90 Deg)
FT20E90BW80
FT32E90BW80
FT48E90BW80
FT64E90BW80
Elbow (45 Deg)
FT20E45BW80
FT32E45BW80
FT48E45BW80
FT64E45BW80
Tee
FT20T80
FT32T80
FT48T80
FT64T80
King Nipple
FT20K80
FT32K80
FT48K80
FT64K80
Cap
FT20CPBW80
FT32CPBW80
FT48CPBW80
FT64CPBW80
Steel Flanges 150# & (300)#
Fitting
30
Size
1¼" 2"
FT48B150 (300)
4"
Blind
FT20B150 (300)
Weldneck
FT20FWN150 (300) FT32FWN150 (300) FT48FWN150 (300) FT64FWN150 (300)
Threaded
FT20FT150 (300)
FT32FT150 (300)
FT48FT150 (300)
FT64FT150 (300)
Slip-On
FT20FS150 (300)
FT32FS150 (300)
FT48FS150 (300)
FT64FS150 (300)
FT32B150 (300)
3"
FT64B150 (300)
Storage Tank components
PART
PART
PART
ST4607
Master Storage Tank Dial 10"
STA1310-20
Pipeaway Adapter 1¼"
STA1416
Manifold, Relief Valve 1¼"
ST5520R
Dial Only, Flow Indicator
anhydrous ammonia
PART
PACKING KIT: ST1415-7
PART
PART
MIVS32AL
CTA-400-C
Vent Stack, 40" Aluminum c/w Cap Valve, Hydrostatic ¼"
PART
PART
ME875S-16
STA1310A
Valve, Relief 250 PSI 1¼"
Backcheck 2" FNPT X 2" FNPT
OLD STYLE MOUNT
NEW STYLE MOUNT
Master Float Gauge
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
STME3650B
ST5520-2 Flow Indicator Assembly, 2"
ST5520-2F Flapper Only, 2"
ST5520-3 Flow Indicator Assembly, 3"
ST5520-3F Flapper Only, 3"
Master Float Gauge Assembly
108" Diameter
gasket - sti30040
For DECALS, turn to pages 48 & 49
31
Storage Tank & Safety
anhydrous ammonia
PART
PART
PART
PART
KTVG16GO
Valveguard 1" Globe Valve
KTVGV16AO
Valveguard 1" Angle Valve
DYVG2032O
Valveguard 1¼" and 2" Globe
KTVG24STO
Valveguard 1¼" HF Globe
Valveguard 1½" HF Globe
Valveguard 1¼"-1½" HF Globe
PART
PART
PART
PART
MIG5290300B
Goggles Non-Vented
MIPH75650
Safety Container
MIPH76411
Water Container Side-Mount
MINORT1441WG
Gloves Neoprene 14"
PART
PART
PART
PART
MIPH76410
Water Container Top-Mount
HSCVT10
Hose, Clear Vinyl 5 ⁄ 8" - 100ft Roll
MEP120B
Spanner Wrench
MEP120C
Spanner Wrench, New Style
PART
PART
PART
PART
MILB2
Lock Box, 2 Hose
MILB3
Lock Box, 3 Hose
MI0P9011EY
Shutoff, Cable, 1 Compartment
MI0P9002EY
Shutoff, Cable, 2 Compartment
MIN1572
Needle Valve ¼" Angle
Hosebarbs:
CTA-1132 3 ⁄ 8"Hose x ¼" MPT
CTA-1138 ½"Hose x ¼" MPT
MIN1532
Needle Valve ¼" Straight
Hosebarbs:
CTA-1132 3 ⁄ 8"Hose x ¼" MPT
CTA-1138 ½"Hose x ¼" MPT
For DECALS, turn to pages 48 & 49
32
Valves
PARTdescription
PARTdescription
PARTdescription
STAL310P
STAL311P
STAL312P
STAL313P Valve, Globe 1"
Valve, Angle 1"
Valve, Globe 1¼"
Valve, Angle 1¼"
REPAIR KIT: ST310-22
PARTdescription
PARTdescription
PARTdescription
PARTdescription
STAL316P
STAL317P
ME810-8
ME820-8
Valve, Globe 2"
Valve, Angle 2"
Valve, Quick Acting 1"X1" Angle
REPAIR KIT: ME810BRK
anhydrous ammonia
PARTdescription
Valve, Quick Acting 1"X1" Straight
REPAIR KIT: me810brk
High Flow Valves
PARTdescription
PARTDescription
PARTdescription
PARTdescription
ME825-10
ME825-12
ME825P-16 Valve, Globe 2"
ME815-10
Valve, Angle 1¼"
REPAIR KIT: ME815-10SRK
STA331
Valve, Globe 1¼"
Squibb Taylor
Valve, Globe 1¼"
Valve, Globe 1½"
ME815P-16 Valve, Angle 2"
CTA-2525-H Valve, Globe 1¼"
Continental
REPAIR KIT: CTA-25H-RK
33
tank Valves
anhydrous ammonia
PARTdescription
PARTdescription
STA521P
STA525P
Valve Withdrawal 1¼" x 1"
Valve Fill/Vapour 1¼"
High Flow TANK Valves
PARTdescription
PARTdescription
PARTdescription
STA484 N-45
STA482 N-60
STA335
CTA-1406-FBW Valve Withdrawal
1¼" Bottom Mount
Valve, Withdrawal 1¼"
Valve, Withdrawal 1½"
PARTdescription
STA1527
34
Valve/Speedy Coupler Assembly
1¼" x 2¼" ACME, Includes Bleeder
STA1529
Valve/Speedy Coupler Assembly
1½" x 2¼" ACME, Includes Bleeder
Valve, 1¼" x 1¼"
Less Excess Flow
ISC Valves
PART
RGA3209D050
Valve, 1¼" ISC Straight
REPAIR KIT: RGA3209R-50
PART
REGO RGA3209DT050
Valve, 1¼" ISC 90 Deg
REPAIR KIT: RGA3209R-50
PART
RGA3212R250
Valve 2" ISC Straight
REGO RGA3212RT250
Valve 2" ISC 90 Deg
PART
PART
REGO ME990-10-85
MARSHALL ME992-10-85
MARSHALL
Valve, 1¼" ISC Straight
Valve, 1¼" ISC 90 Deg
REPAIR KIT: ME990-10-VRK
PART
PART
REGO ME990-16-260
MARSHALL ME992-16-500
Valve 2" ISC 90 Deg
MARSHALL
REPAIR KIT: RGA3212A-50
REPAIR KIT: RGA3212A-50
PART
PART
PART
PART
FRC477-16-25
REPAIR KIT: FRRC400-16
FISHER FRC471-16-25
Valve 2" ISC 90 Deg
REPAIR KIT: FRRC400-16
anhydrous ammonia
PART
FISHER FRC484-24-40
FISHER ME990S-3DF
FISHER
ISC, 3" X 300# Single Flange
ISC, 3" Double Flange, 500GPM
REPAIR KIT: FRRC40424T012
35
ISC Accessories
anhydrous ammonia
36
PARTDESCRIPTION
PARTDESCRIPTION
RGA3209TL
FRT20377000A2 Gland Assembly - Fisher ISC 2"
FRT20430000A2 Grand Assembly - Fisher ISC 3"
Thermal Latch - Rego ISC 1¼"
PARTDESCRIPTION
PARTDESCRIPTION
FRP134
ME990-10-85
Link, Fusible
Thermal Latch - Marshall ISC 1¼"
PARTDESCRIPTION
PARTDESCRIPTION
ME990-10-PGA Grand Assembly
Marshall ISC 1¼"
ME990-PGA
Grand Assembly - Marshall ISC 2" & 3"
Emergency Shutoff Valves
PARTDESCRIPTION
RGAA6010
RGA6016
ESV, 1¼" Rego
ESV, 2" Rego
REPAIR KIT: RGAA6010-50
Thermal Latch: RG6010TF
REPAIR KIT: RGAA6016-50
Thermal Latch: RG6016TF
PARTDESCRIPTION
PARTDESCRIPTION
ME980-10
ME980-16
ESV, 1¼" Marshall
ESV, 2" Marshall
Thermal Latch: ME980-905
REPAIR KIT: ME980-16-SRK
Thermal Latch: me980-905
PARTDESCRIPTION
PARTDESCRIPTION
FRN550-10
FRN550-16
ESV, 1¼" Fisher Snappy Joe
REPAIR KIT: FRT13090-T0012
Thermal Latch: frt12963t0012
anhydrous ammonia
PARTDESCRIPTION
ESV, 1¼" Fisher Snappy Joe
REPAIR KIT: FRT13090-T0012
Thermal Latch: frt12963t0012
37
Air Actuators for ISC's & ESV's
ISC VALVE
ROTARY ACTUATOR
Rego 1¼"
not available
STROKE ACTUATOR
anhydrous ammonia
RGA3209PAF
Marshall & Fisher 1¼"
ME225
ME205
RGA3212RA
RGA3213PA
ME226
ME206
ROTARY ACTUATOR
STROKE ACTUATOR
RG6016RA
RG6016-60C
Rego 2"
Fisher 2" & 3"
ESV
Rego 1¼"
Marshall & Fisher 1¼"
ME552
ME551
RG6016RA
RG6016-60C
ME552
ME551
Rego 2"
Fisher 2" & 3"
38
Combination Rotary Actuators & ISC Valves
anhydrous ammonia
PART
PART
ME990AR-10-85
ISC/Rotary Actuator Combo 1¼"
MARSHALL
PART
ME990AR-16-250
ISC/Rotary Actuator Combo 2"
MARSHALL
PART
ME980AR-10
ESV/Rotary Actuator Combo 1¼"
MARSHALL
ME980AR-16
ESV/Rotary Actuator Combo 2"
MARSHALL
PART
ME990SAR3DF-500
MARSHALL
Double Flange ISC/Rotary Actuator 3" 500GPM
39
TDU Air Shutdown System
anhydrous ammonia
ISC
40
ISC
PART
PART
PART
PART
HDKN90555397
Valve, Pressure Protection 85 PSI
MI111-3002-P
Regulator Pre-Set 50 PSI
Primary Pressure 125 PSI
HDKN20001
Shutoff/Dump Valve
DYESOSB
Bracket, Shutoff Valve
PART
PART
PART
PART
BEAIR1000
Air Valve Protection 150 PSI
HDKN32005
Air Valve, Quick Release
HS1J-223-07
Hose, ¼" Blue Nylon, DOT
100 ft. Roll
MID6520-04-02
Elbow, Air ¼" X 1 ⁄ 8" MPT DOT
PART
PART
PART
PART
MID6520-04-04
Elbow, Air ¼" X ¼" MPT DOT
MID6520-04-06
Elbow, Air ¼" X 3 ⁄ 8" MPT DOT
MID6580-04-00
Union, Air ¼" x ¼" DOT
MID6540-04-00
Tee, Air ¼" x ¼" x ¼" DOT
baseSTATION oN BOARD TRUCK COMPUTER
BASE Engineering's BASEstation is an on-board computer designed specifically for petroleum delivery fleets. Our truck
mounted computer and back-office connection were designed and built by people with 33 years experience in fuel delivery
automation and control.
DAS System Keypad
Pro Control II - Handheld
BESTN1000-Verizon
BEDAS1000R
BEDSSDAX 900-ID
DSSD Antenna
RFID Tags
BEANT6001
BETAG1000
anhydrous ammonia
BASE Station OBC
41
Off Truck Emergency Shutdowns
BASE ASKW "D" Series Remote Shutdown
anhydrous ammonia
Developed specifically for delivery truck applications requiring
intrinsically safe, explosion proof handhelds. Systems can be
specified for Fisher or Rego internal valves and any type of truck
engine.
PARTDESCRIPTION
BEASKD200Q-ECS
Delivery Truck Remote Shutdown, Cable ISC
Transmitters & Accessories
PARTDESCRIPTION
BEASK300TX
BEASK200TX
BEASK400TX
BEANT1000
BEASK200TX
BEASK300TX
BEASK400TX
BECAS1000
2 Function Transmitter - Query, Emergency Stop
3 Function Transmitter - PTO, Throttle, Emergency Stop
4 Function Transmitter - PTO, Throttle, Query, Emergency Stop
Leather Case for ASK/RVC Style Transmitter
BECAS1000
BECOAXT-15 (30)
Miscellaneous Parts
Antennas & Coax Cables
PARTDESCRIPTION
BESOL1000
PARTDESCRIPTION
BEANT1000
BECOAXT-15
BECOAXT-30
BEREL1100
42
Internal Air Solenoid
Replacement Antenna for ASK/RVC Systems
15 ft. Coaxial Cable
30 ft. Coaxial Cable
BEREL2000
BEWIRASM1000
Relays & Accessories
Squibb RSD Remote
PARTDESCRIPTION
PARTDESCRIPTION
BEWIRASM1000
BEREL1100
BEREL2000
STRSD-T2
Diode Replacement Kit for Reversing Relays
Prestolite Relay for Hose Reel Circuits
Ignition Kill Relay
Handheld RSD Transmitter - 2 Function
Excess Flow ValveS
These valves are designed to close when liquid flow exceeds the valve's setting. They are intended to prevent large
discharges of NH3 to the atmosphere due to a break in the hose or piping system.
Caution: Excess flow valves close only when restrictions down-stream of the valve do not exceed the flow rating
of the valve.
anhydrous ammonia
REGO
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
RGA1519A4 Valve, Excess Flow 2"F x 2"F, 100GPM
RGA1519B4 Valve, Excess Flow 2"F x 2"F, 133GPM
RGA3282C
PARTDESCRIPTION
Valve, Excess Flow RGA3292C
1¼"F x 1¼"F, 50GPM Valve, Excess Flow 2"M x 2"F, 110GPM
SQUIBB taylor
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
STA1705
STA1706
STA1708
Valve, Excess Flow 1¼"F x 1¼"F, 50GPM
Valve, Excess Flow 1¼"M x 1¼"M, 50GPM
Valve, Excess Flow 2"M x 1¼"M, 95GPM
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
STA1711 Valve, Excess Flow
2"M x 2"M x 1¼"M, 95GPM
STA1713 Valve, Excess Flow
3"M x 3"M x 2"F, 165GPM
STA1715 Valve, Excess Flow 3"MPT x 2"MPT, 165GPM
43
Back Check Valves
FISHER
anhydrous ammonia
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
FRG104
FRG105
FRG106
FRG107
Valve, Back Check 3"M x 3"F
Valve, Back Check
2"M x 2"M x 1¼"F
Valve, Back Check 3"F x 2"M
Valve, Back Check 3"M x 3"M
MARSHALL
(HIGH FLOW BACK CHECK)
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
ME87OS-10 Valve, Back Check 1¼"F x 1¼"M
ME87OS-16 Valve, Back Check 2"F x 2"M
ME87OS-24 Valve, Back Check 3"F x 3"M
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
RGA3176
RGA3186 Valve, Back Check 2"M x 2"F
RGA3196 Valve, Back Check 3"M x 3"F
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
STA1727
STA1728
STA1729
REGO
Valve, Back Check 1¼"M x 1¼"F
sQUIBB
44
Valve, Back Check 1¼"M x 1¼"F
Replacement Dials & Float Gauge Gaskets
PARTDESCRIPTION
PARTDESCRIPTION
ST4607
ST5553
ME930-905 Replacement Dial 4"
Glow in the Dark
Master Storage Tank Dial 10"
Replacement Dial 4" 5-95%
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
RC5-40
RC5-2
ST130018
Dial, JR Head
Dial, SR Head
anhydrous ammonia
PARTDESCRIPTION
Dial, Drop In 2208CV
ST130122
ST130121
PARTDESCRIPTION
PARTDESCRIPTION
ST130121
ST130122
Gasket, JR Float Gauge (Actual Size)
Gasket, SR Float Gauge (Actual Size)
45
NH3 Float Gauges
delivery units
anhydrous ammonia
Installation Tool
Marshall Trans-Max Float Gauge
Accu-Max Float Gauge
Designed to replace rotary style gauges in tanks with
fluid capacities greater than 2300 gallons. Suitable for
use in bobtail, transport and bulk storage applications.
Mounts to all standard 1" NPT tank coupling adapters
and is suitable for NH3 or LPG. Custom lengths
available upon request. DRIPTION
Measure liquid levels within horizontal DOT and
Stationary ASME Tanks with fluid capacities above
2,300 gallons. Suitable for use in bobtail, transport,
railcar and bulk storage applications.
PARTDESCRIPTION
Available for order in a variety of different lengths.
Must specify tank diameter.
ME930WG
MEP930WG
Float Gauge, Trans-Max C/W Glow Dial
Installation Tool - Trans Max Float Gauge
PARTDESCRIPTION
ME930
Float Gauge, Trans-Max C/W Glow Dial
Tool is Required for Installation
Available for order in a variety of different lengths.
Must specify tank diameter.
nurse tanks
SR Tank Float Gauges
JR Tank Float Gauges
PARTDESCRIPTION
PARTDESCRIPTION
RC6280-41 RC6283-41
RC6280-46 RC6283-46
RC6283-49 RC6281-41
RC6284-41
RC6281-46
RC6284-46
41" Tank Diameter, Top Mounting, SR Head
41" Tank Diameter, End Mounting, SR Head
46" Tank Diameter, Top Mounting, SR Head
* Call for storage tank gauge requirements
REPLACEMENT BOLTS: MIFGBSR
46
41" Tank Diameter, Top Mounting, JR Head
41" Tank Diameter, End Mounting, JR Head
46" Tank Diameter, Top Mounting, JR Head
46" Tank Diameter, End Mounting, JR Head
* Call for storage tank gauge requirements
REPLACEMENT BOLTS: MIFGBJR
Truck Accessories
anhydrous ammonia
Wheel Chock Bracket
Designed to provide a durable and convenient
receptacle to store wheel chocks during over the road
transit. Durable aluminum construction and molded
inserts prevent damage to wheel chocks.
Hose End Valve Holster
Safely and effectively secures delivery hose end
valves during transport.
PARTDESCRIPTION
PARTDESCRIPTION
ME200BK
MEP801
Bracket, Wheel Chock
comes with Chocks
Holster, Hose End Valve
Universal Spring Loaded Utility Bracket
Provides a safe and secure method to mount and
retain hand tools such as shovels, picks, brooms or
other equipment during transit.
Back-up Alarm
PARTDESCRIPTION
PARTDESCRIPTION
MEP082
MIABU
Universal Spring Loaded Utility Bracket
Back Up Alarm (12V)
47
NH3 Decals
anhydrous ammonia
Sold in Sheets of 6
PARTDESCRIPTION
PARTDESCRIPTION
DECAU
DEANH
DEAMM
DEINH
DEHAZ
DEFLLG
DEVY2
DEESO
DELO2
DESF2Y
Decal – Caution Green 4"
Decal – Anhydrous Green 4"
Decal – Ammonia Green 4"
Decal – Inhalation Black 4"
Decal – Hazard Black 4"
Sold in Sheets of 10
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
DECAUCD
DEAMMCD Decal – Ammonia Curved Down
DEAMMCU Decal – Ammonia Curved Up
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
DEMAX 3X14 Decal - Maximum Speed 40 km/h
DE1005W Decal - 1005 White
DE1005WP Decal - 1005 White Plastic
DE1005H Holder 1005WP
DESMV
DESMVM
Decal – Caution Curved Down
Don't see what you need?
We can supply custom decals. Call 1-866-885-8260 for details.
48
Decal – Fixed Liquid Level Gauge
Decal – Vapour Yellow
Decal – Emergency Shut Off, Blue
Decal – Liquid Orange
Decal – Spray Fill
Decal - Slow Moving Vehicle
Decal - Slow Moving Vehicle Metal
NH3 Decals
PARTDESCRIPTION
PARTDESCRIPTION
DENTSP
DESPHA
DEWTVS
Decal - Nurse Tank Safety
Decal - Ammonia Handling
Decal - Warning Vehicle Stops
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
DETFDS
DETFST
DEEMTDU
Decal – Transfer TDU to Storage
Decal – Transfer Storage to TDU
Decal – Emergency Procedures TDU
PARTDESCRIPTION
PARTDESCRIPTION
PARTDESCRIPTION
DEUNAA
DERC10
DESKR
Decal - NH3 UN 1005 (WHIMIS)
Decal Red Cross 10"
anhydrous ammonia
PARTDESCRIPTION
Decal Safety Kit
49
Blackmer LGLD3F & LGLD3E Pump
anhydrous ammonia
BKLGLD3F
REFPART
DESCRIPTION
QTY
4 BK415113 Cover-Relief Valve
1
5BK920331Capscrews
6
8BK475135Spring
1
9 BK455129 Relief Valve
1
9 BK455100 Relief Valve (Nickel Plated) 1
10BK701925*O-Ring
1
12BK015127 Casing
1
13 BK265148 Rotor and Shaft
1
14BK095131*Duravane
6
20BK035128 Head
2
21BK920369 Capscrews
40
24 BK903172* Ball Bearing
2
24ABK903523 Locknut
2
24BBK903524* Lockwasher
2
REFPART
DESCRIPTION
26 BK385125* Gasket Bearing Cover
27 BK041815 Bearing Cover (Inboard)
27A BK041817 Bearing Cover (Outboard)
28BK920285 Capscrews
35BK909130*Key-Shaft
41BK185111 Liner
42 BK655112 Flange Threaded
42 BK655102 Flange Welded
42A BK702002* 0-Ring Flange
42B BK920547 Capscrew Threaded Flange
42B BK920510 Capscrew Welded Flange
71BK065112*Disc
72 BK702041* 0-Ring Head
73 BK908198 Gauge Plug
Blackmer Bypass
item number
DESCRIPTION
BK893080
BK893980
BKBV2-W
Valve, Bypass 1¼"
Valve, Bypass 2"
Valve, Bypass c/w WN Flanges
BKBV2-W
50
QTY
2
1
1
12
1
1
2
2
2
8
8
2
2
2
REFPART
DESCRIPTION
74
76
76A
77
104
153
186
BK185191
BK317815
BK701992
BK125105*
BK331908*
BK335225*
BK341801
Key Liner
Grease Fitting
Grease Relief Fitting
Push Rod
Seal Grease
Seal Mechanical
Shaft Protector
BK898981
Repair Kit
* Items included in repair kit
QTY
1
2
2
3
1
2
1
Blackmer TLGLF3C Pump
anhydrous ammonia
LOCKNUT TOOL
BKTLGLF3C
REFPART
DESCRIPTION
4 BK415108
5 BK920331
8 BK471428
9 BK451417
9A BK455100
10 BK701919
12BK015128
13 BK265147
14 BK095132*
20BK035132
21 BK920351
24 BK903156*
24A BK903521
24B BK903522*
Cover-Relief Valve (R/V) 1
Capscrew - R/V Cover
6
Spring - R/V
1
Valve - R/V
1
Relief Valve (Nickel Plated) 1
O-Ring R/V Cover
1
Casing
1
Rotor and Shaft
1
Vane - Duravane
6
Head
2
Capscrews - Head
36
Ball Bearing
2
Locknut - Bearing
2
Lockwasher - Bearing
2
QTY
REFPART
DESCRIPTION
QTY
26 BK383940* Gasket Bearing Cover
2
27 BK041431 Bearing Cover
2
28 BK920285 Capscrews Bearing Cover 8
35BK909130*Key-Shaft
1
41BK185101 Liner
1
42 BK652010 Flange 2" NPT
1-2
42 BK652024 Flange Welded
1-2
42 BK655100 Flanged Elbow - 2"NPT 1-2
42 BK655109 Flanged Elbow - 2" Weld 1-2
42 BK652036 Blank Flange - Aux Inlet 1-2
42A BK702004* 0-Ring Flange (Current)
2
42A BK701919* O-Ring Flange (Older Pumps) 2
42B BK920491 Capscrew Flanges
8
71BK065121*Disc
2
REFPART
DESCRIPTION
QTY
72
73
74
76
76A
77
104
123
186
---
153
BK711923* O-Ring - Head
2
BK908198 Gauge Plug
2
BK185193 Key - Liner
1
BK317815 Grease Fitting
2
BK701992 Grease Relief Fitting
2
BK121607* Push Rod
3
BK331918* Seal Grease
2
BK701480* Dirt Shield
2
BK341601 Shaft Protector
1
BK903091 Tool - Locknut
--
BK334439* Mechanical Seal
2
* Items included in repair kit
REPAIR KIT: BK898980
51
Corken 1021 & 1022 Pumps
Torque 25 ft lb
Corken Bypass
partDESCRIPTION
CK1787-XA
CKT166
CKZV200
CKZV200BAFF
anhydrous ammonia
Direction of rotation
Valve, Bypass 1"
Valve, Bypass 1¼"
Valve, Bypass 2" Threaded
Valve, Bypass 2" WN Flange
CKT166
Torque
15 ft lb
Torque
25 ft lb
CK1021 and CK1022
REFPART
DESCRIPTION
QTY
1CK1201-2Cam
1
2CK2841 Case
1
3CK1206-3Flange
2
4 CK2-245A* O-Ring Flange
2
5 CK2-112A* Adjusting Screw O-Ring
1
6 CK2590
Flush Seal Plug 1 ⁄ 8"1
7 C2252
Relief Valve Adjusting Screw 1
8 CK1207
Valve Cap
1
9 CK1227
Relief Valve Spring and Guide 1
10 CK2-228A* Relief Valve Cap O-Ring
1
11 CK1224
Relief Valve
1
12 CK1226
Relief Valve 1
13 CK1309
Cam Key 1
52
REFPART
DESCRIPTION
14CK1308-9*
15 CK1208-1X1R
16 CK1358*
17 CK1164-1
18 CK2158
19 CK1769
20 CK1343
21 CK1769-XRA*
22CK1209-1*
23CK1205-4
24 CK2754-X*
25 CK2760-244
26 CK1343
Vane
10
Rotor and Shaft
1
Seal – Grease
2
Bearing Cap
2
Grease Zerk 1 ⁄ 8"2
Housing Bearing
2
Fitting Relief
2
Seal Mechanical
2
Sideplate
2
Head
2
Bearing Assy – Complete 2
Retainer Ring
2
Fitting Relief
2
QTY
REFPART
DESCRIPTION
27
28
29
30
31
39
CK2-128A
CK1882
CK2-240A
CK2-268A*
CK2270
CK2-227A
Shaft O-Ring
Seat Adapter Plate
Adapter Plate O-Ring
O-Ring Casing
Key ¼"
Seal Seat O-Ring
CK2906-X2 Repair Kit
*Items included in repair kit
QTY
2
2
2
2
2
2
Corken Z3500 Pump
anhydrous ammonia
CKZ3500
REFPART
DESCRIPTION
1CK2-228*
2CK2-245
3CK2-259
4CK2-268
5 CK1206-4
6 CK1207-2
7 CK1208-1X6R
8 CK1224
9 CK1309
10 CK1343
11 CK1359
12 CK2158
13 CK2159
O-Ring
O-Ring
O-Ring
O-Ring
Inlet Flange - 3"MNPT
Relief Valve Cap
Rotor Shaft Assembly
Relief Valve
Cam Key
Grease Relief Fitting
Lubrication Plate
Grease Zerk
Lubricap QTY
1
1
1
2
1
1
1
1
1
4
2
2
2
REFPART
DESCRIPTION
14 CK2270*
15 CK2649
16 CK2754*
17 CK2760-244
18 CK3253
19 CK3442
20CK3935
21CK3936*
22 CK4248
23 CK4417
24 CK4432*
25 CK4435*
26 CK4438
Shaft Key - ¼"
Name Plate
Outer Bearing
Retainer Ring
Cam Key Pin
Pipe Plug - ¼"NPT
Sideplate
Vane
Relief Warning Tag
Bearing Cap
Thrust Bearing Assembly
Thrust Bearing Mount Ring
Grease Seal
QTY
1
1
2
2
2
2
2
6
1
2
2
2
2
REFPART
DESCRIPTION
27 CK4439*
28 CK4439-1*
29 CK4439-2*
30 CK4441*
31 CK4431-X2
32 CK4985
33CK5534
34CK5537
35CK5539
36 CK5538
37CK5548
38 CK5554-X*
Bearing Cap Shim - .002"
Grease Seal
Mechanical Seal
Coro-Vane Shaft Cover
Head
Case
Cam
Outlet Flange 3"NPT
Spring
Vane Driver
QTY
2
2
2
2
2
1
2
1
1
1
1
CK3195-X2 Repair Kit
*Items included in repair kit
53
Spindles, Hubs, Tires & Rims
anhydrous ammonia
PARTDESCRIPTION
MIH614WP
mih821wp
mih881wp
mih886wp
mih5500wp
tw215161sgt
tw231268tL
tw30532DT
Hub, 6 bolt comes with bearings and seals, 5000# rating
Tire, 21.5 x 16.1 lug style on 8-bolt rim
Tire, 23.1 x 26 lug style on 8-bolt rim
Tire, 30.5 x 32 lug style on 10-bolt rim
wagon
Duolift M1450
Duolift M1750
Duolift M2000
Duolift M2100 Duolift M2400
Hub M1H614WP
M1H821PMIH821PM1H821PM1H821P
Spindle
M1S614-32X224M1S821-40X288M1S821-40X288M1S821-40X288M1S821-40X288
Tires
TW215161SGTTW215161SGTTW215161SGTTW215161SGTTW215161SGT
Leaf Spring Assembly DLE5115
DLE5115
N/A
N/A
N/A
Leaf Spring U-Bolt
DLE245DLE245DLE245N/A N/A
54
wagon
Duolift lb2900
Hub
Spindle
Tires
Leaf Spring Assembly
Leaf Spring U-Bolt
MIH886WPM1H886WP
M1S886-50X256M1S886-50X256
TW215161SGTTW231268TL
N/A
N/A
N/A
N/A
Duolift LB4400 (fRONT)
Duolift lb4400 (rEAR)
jOHNSON WELDING 2000
M1H881WP
M1S885-72X288
TW30532DT
N/A
N/A
M1H5500WP
M1S5500-40X256
TW215161SGT
N/A
N/A
LC Meters
Liquid Controls meters are positive displacement meters, designed for liquid measurement in both custody transfer and
process control applications. They can be installed in pump or gravity flow systems. Because of their simple design,
they are easy to maintain and easy to adapt to a variety of systems. LC meters are available for order with or without
temperature compensation.
Certified MA7 Meters
DESCRIPTION
LCMA7NH3-NTC
LCMA7NH3-WTC
LCMA7CLI10 w/LCR2
Meter 2" NH3,
LCRII No Temp. Compensation
Meter 2" NH3
LCRII With Temp. Compensation
Meter 2” LPG
Certified MA15 Meters
pART DESCRIPTION
LCMA15NH3-NTC
LCMA15NH3-WTC
Meter 3" NH3
LCRII No Temp. Compensation
Meter 3" NH3
LCR-II™ Electronic Register
anhydrous ammonia
pART W&M Seal Wires
Air Eliminator
Solenoid Activated
Differential
Pressure Valve
Positive Displacement Flow Meter
Strainer
W&M
Thermometer Well
Optional Temp. Probe (RTD)
LectroCount LCR-II
Liquid Controls produces among the most reliable and accurate metering systems available worldwide. For truck-mounted
or fixed-site custody transfer applications requiring Weights & Measures-approved accuracy, LC products deliver
consistent, error-free, dependable service.
MA7 Meter Parts
ITEMpART DESCRIPTION
1
LC06850
O-Ring, Front/Rear Cover MA7 Meter
2
LC06854
O-Ring, Round MA7 Meter
2A
LC40430
O-Ring, Flanges, Square MA7 Meter
3
LC49403
Adjuster Assembly
4
Packing Gland - see Fig.1
5
LC06856
O-Ring Packing Gland
6
LC48287
Shaft, Adjuster, Old Style
7
LC41786
Bushing, Drive Shaft, set of 2
8
LC02188
Retaining Ring, Drive Shaft
9 LC40122Gear
LC81513040
Printer Cable, LCR2
LC825001
Cable Power Printer, 12-24 Volt
Fig. 1
Packing Glands - NH3
Packing Glands - LPG
PARTDESCRIPTION
PARTDESCRIPTION
LC49588 Fork Style (New)
LC49541 Blade Style (Pre '91)
LC49561 Fork Style (New)
LC49567 Blade Style (Pre '91)
55
LC Meters
anhydrous ammonia
Mechanical Vapour Eliminator
Liquid Controls mechanical air and vapour
eliminators remove air and vapour from metering
systems. This increases the accuracy of the
meter by allowing only liquid to pass through the
meter for measurement.
ITEMPART
1
2
3
4
5
6
7
DESCRIPTION
LC48239
Cover, Air Eliminator Outlet
LC42823
Gasket, Air Eliminator Cover
Vapour Plate - see Fig. 1
LC501024 Float Assembly
LC501040 Float & Reed Assembly
LC48571
Reed Valve
LC09335
Seal, Vapour Eliminator Base
Fig. 1
Vapour Plates - NH3
Vapour Plates - LPG
PARTDESCRIPTION
PARTDESCRIPTION
LC501103 No Weep Hole
LC45823 With Weep Hole
LC42822 No Weep Hole
LC45824 With Weep Hole
Note:Parts for the Vapour Eliminator and the Differential Valve are
interchangeable between MA7 and MA15 configurations.
Differential Valve
Differential Valves are spring loaded valves on the outlet side of the meter. Most Liquid
Controls meter systems with a vapour eliminator also have a differential valve. Vapour
eliminators and differential valves work in conjunction to stop the flow of product through
the meter until the vapour is eliminated from the system. In order to do this, the vapour
eliminator and the differential valve are piped together at installation.
Differential Valve - NH3 Parts
1
2
3
4
5
5A
O-Ring, Plate Valve NH3
Diaphragm Neoprene NH3
O-Ring, Valve Piston NH3
Piston, Valve NH3
O-Ring, Flange Valve NH3
Gasket, Square, Valve
LC9425
LC501555
LC9423
LC501554
LC9425
LC40430
Differential Valve - LPG Parts
56
1
2
3
4
5
5A
O-Ring, Plate, Differential Valve LPG
Diaphragm, Differential Valve LPG
O-Ring, Differential Valve Piston LPG
Piston, Differential Valve LPG
O-Ring, Flange, Differential Valve LPG
Gasket, Square, Differential Valve
LC07900
LC47306
LC06856
LC49947
LC07838
LC40430
LC Meters
anhydrous ammonia
Strainer Assembly
Strainers help to protect meters from serious damage
caused by burrs dislodged from new piping, pipe
scale or foreign material. The strainer’s initial cost
is good insurance against the cost of down time and
replacement parts incurred from a damaged meter.
MA7 Configuration
MA15 Configuration
ITEMPART
DESCRIPTION
ITEMPART
DESCRIPTION
1
2
3
4
5
6
7
Seal Ring (Square) Strainer
Gasket, Strainer D-Shape (not shown)
O-Ring, Lower-Strainer
O-Ring, Strainer Cover
Gasket, Flange (Square)
Basket, Strainer 100 Mesh
Rod, Magnet Holder (not shown)
1
2
3
4
5
6
7
Seal Ring (Square) Strainer
Gasket, Strainer D-Shape (not shown)
O-Ring, Lower-Strainer
O-Ring, Strainer Cover
Gasket, Flange (Square)
Basket, Strainer 100 Mesh
Rod, Magnet Holder (not shown)
LC6844
LC43639
LC6854
LC09338
LC40430
lca2432
LC501401
LC09201
N/A
LC4474
LC09335
N/A
lc4474
LC501401
Fork or Blade
Drive
Pod Pulsar
The Liquid Controls Pulse Output Device (POD) converts the rotary motion of Liquid
Controls Positive Displacement Flow Meters into electronic pulses that equal the
volumetric measurements of the meter. This allows for remote installation of the meter
register.
ITEMpart DESCRIPTION
1
2
Pulse Output Device Assembly
O-Ring, Packing Gland
LCP0DI
LC06856
57
Chemical Transfer Pumps
Liquid
ShurFlo AgRunner
ShurFlo's AgRunner features a durable glass-filled
polypropylene housing mounted in a rugged steel frame.
Capable of flow rates of up to 10 GPM, the AgRunner
comes with a 1" in-line flow meter along with suction and
discharge hoses.
PARTDESCRIPTION
SF1100PTSI
SF1100PTS100
SF-1100-110V
AgRunner Chemical Pump with Meter
AgRunner Chemical Pump without Meter
Pump, 110 V
PARTDESCRIPTION
SFFM1100I
SF94-732-00
58
AgRunner Meter Only
Electronic Assembly Kit FM1100 Meter
vertiflo Liquid Fertilizer Pumps
Shaft Size 1¼"
Liquid
Vertiflo 1424 Pump
Vertiflo 1434 Pump
Typically 350 GPM at 1800 RPM with
3 phase 20 HP electric motor.
Typically 500 GPM at 1800 RPM with
3 phase 30 HP electric motor.
PARTDESCRIPTION
PARTDESCRIPTION
VL1424-4x3x10 Pump 4" Inlet x 3" Outlet, 10" Impeller
VL1424-6x4x12 Pump 6" Inlet x 4" Outlet, 12" Impeller
Vertiflo 1424 Replacement Pump Parts
Vertiflo 1434 Replacement Pump Parts
itempart DESCRIPTION
PartDESCRIPTION
1
6
7
9
10
11
12
13
14
14A
15
16
Shaft
Thrust Bearing
Radial Bearing
Lip Seal
Shaft Snap Ring
Cap Snap Ring
Lip Seal
Slinger
Seal Spacer Sleeve
Mechnaical Seal
Case Gasket
Stuffing Box Gasket
VLSJ-2134-SI-00 Mechanical Seal 1434
VL50-5449-01-60 Casing Gasket 1434
VL22-2403-04-23 VLBD-5122-22-00 VLBD-5125-01-00 VLSL-3420-01-00 VLRE-2220-01-00 VLRE-5056-01-00 VLSL-3425-01-00 VLSG-4200-01-62 VL32-2824-09-20 VLSJ-2124-S1-00 VL50-4441-01-60 VL50-2217-01-60 6" inlet x 4" outlet
4" inlet x 3" outlet
Note: Piping size and configuration determines actual pump flow.
59
CDS-John Blue Liquid Fertilizer Pumps
JBSP-3320-P Pump 3" Pedestal (self-priming)
Typically 250 GPM at 3500 RPM with 3 phase 10 or 15 HP electric motor
SP-3320 Pump Parts
Liquid
ITEMPART
1
2
3
4
5
6
DESCRIPTION
JB43005
Mech. Double Seal
JB102037-01Impeller
JBS-3638
Gasket Seal (2)
JBS-3641
Housing Cover Gasket
JBS-3654
Suction Flange Gasket
JBS-3646
Impeller Shaft
Shaft Size 1 1/8"
JBS-3320-P Pump 3" Pedestal
Typically 275 GPM at 3500 RPM with 3 phase 15 HP electric motor
S-3320 Pump Parts
ITEMpart
1
2
3
4
5
DESCRIPTION
JB43005
Mech. Double Seal
JB102037-01Impeller
JBS-3638
Gasket Seal (2)
JBS-3656
Flange Gasket (2)
JBS-3646
Impeller Shaft
60
Shaft Size 1 1/8"
Liquid FeRtilizer Pump Skid
At DyTerra, we manufacture modular liquid fertilizer pumping skids, custom built with high flow plumbing to match your
specific requirements.
Available Options:
Vertiflo 1424 Pump
CDS-John Blue 3320 Pump
KZ Actuators
Ultraflo Butterfly Valves
3” Micro Motion Mass Flow Meter
·
·
·
·
·
· Thompson Strainer
· Custom Control Panel, Built by LV Control
· Complete Control Shed
· DyCrete Liquid Fertilizer Containment System
Liquid
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
MI7SX1-¼
MI7SX1-1 ⁄ 8
MI7SX1-7⁄ 16
MI7SX1-3 ⁄ 8
MI7SX1-5 ⁄ 8
MI7JE
KZVA24V KZ Actuator 24V
3" Butterfly Valve
KZEH4HDW Hardware Kit
KZ208-0016 Stem Coupler
KZ100255 Mounting Disc Bracket
KZ24VDCEH5-4
KZEH4HDW
KZ208-0007
KZ105-0002
Shur Flex Hub 1¼"
Shur Flex Hub 11 ⁄ 8"
Shur Flex Hub 17⁄ 16"
Insert Shur-Flex
KZ Actuator 12/24V 4" Butterfly Valve
Hardware Kit
Stem Coupler
Mounting Bracket
PUMPSHAFT SIZEHUB REQUIRED
Vertiflo 1424
CDS-John Blue 3320
1¼"
MI7SX1 - ¼
11/8"
MI7SX1 - 1/8
61
Liquid FeRtilizer Pump Skid
150lb Flange Hardware
Flange Size Studs
Qty.
Nuts
Qty.
2” MIB710X56 4 MI2H10 8
3” MIB710X56 4 MI2H10 8
4” MIB710X56 8 MI2H1016
6” MIB712X50 8 MI2H1216
150lb Flange Hardware with KZ Actuator
partDESCRIPTION
MI2H10
MI2H12
Nut 2H 5 ⁄ 8"
Nut 2H ¾"
Valve Size Studs
Qty.
3” MIB710X96 4
partDESCRIPTION
MIB710X56 Stud, B7 5 ⁄ 8" X 3½"
MIB712X52 Stud, B7 ¾" X 4¼"
Nuts
MI2H10
Qty.
8
4” MIB710X96 8 MI2H10 16
Liquid
62
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
HSEPDM48XH Hose, 3" Enforcer High PSI
HSEPDM64XH Hose, 4" Enforcer High PSI
MITMU295 Printer, Slip Ticket
MITMU295PS Power Supply, TMU 295 printer
MIG32150
MIG48150
MIG64150
UF400-3C Butterfly Valve 3"
Handle Kit: UF400237-2310L
Handle Kit: UF400237-4610L
Wafer SS
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
MI90555397 Strainer 4"Body with 3"Flanges
MI1002-30
MIHCTSS343 Clamp, T-Bolt, 3"
MIHCTSS456 Clamp T-Bolt, 4"
PG160L
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
MI2924201 Shaft Guard
MI11AV
BVSS203
Check Valve
3" PVC
Air Release
¾" x ½" SS
Gasket Flange
2" x 150#
Gasket Flange
3" x 150#
Gasket Flange
4" x 150#
Ball Valve
Threaded 1¼"
Gauge 0-160 PSI ¼" Liquid Filled
liquid
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
BVSS04 Ball Valve, Threaded ¼" SS
BVSS163 Ball Valve,
3 piece, 1" SS
BVSS16SL Ball Valve, Springloaded, 1" SS
BVSS203
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
BVSS32 Ball Valve, 2" SS
BVSS323 Ball Valve,
3 piece, 2" SS
BVSS483 Ball Valve
3 piece, 3" SS
BVSS643 Ball Valve
3 piece, 4" SS
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
BVSS48150 Ball Valve 150#FLGSS, 3"
BVSS64150 Ball Valve 150#FLGSS, 4"
UF393-3CL Valve, Butterfly 3"
Cast, Lug, SS Stem & Disc
UF393-4CL Valve, Butterfly 4"
Cast, Lug, SS Stem & Disc
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
partDESCRIPTION
FT12KSS King Nipple, ¾" SS
FT16KSS King Nipple, 1" SS
Ball Valve
3 piece, 1¼" SS
Liquid
63
N-Ject® LF by Capstan Ag Systems
Pulse Width Modulation Creates a True Variable Orifice
The secret of achieving a large range of application rates is unlocked using Pulse Width Modulation technology to make a
single oriface perfom like multiple orifices. With a set pressure and a targeted field speed, the operator has a 25:1 range
of rate control without changing an orifice. Now any toolbar can easily be adapted to automatically apply a greater range
of rates than previously thought possible.
Liquid
What to Expect from N-Ject® LF
· Expanded rate application range over conventional spray technology
· Individual boom section "on/off" control
· No more orifice changing
· On-the-go monitoring of product flow through individual tubes
· Potential input cost management with map-driven variable rate applications
· Enhance fertilizer applications in no till, tidge till and minimum till ground
· Double up with variable rate dry production control
· Double up with PMW technology on a chemical sprayer
64
Simonsen Spreaders & Tenders
SMC Pull Spreaders
SMC2064S - Spreader, 6 Ton Stainless
· Available in 5, 6 and 8-ton capacities
· Walking-tandem suspension for better weight distribution
· Stainless steel in critical corrosion areas
· Heavy gauge 7" wide apron chain
· Distributor fan powered by a gearbox
· Stainless steel input and output shafts in fan gearbox
· Simple chain-and-sprocket ground wheel drive system
· Accurate application rate up to 640 lb./acre
· 12" wide heavy duty stainless steel conveyor
Granular
SMC2584S - Spreader, 8 Ton Stainless
Available options:
· 409 stainless steel hopper (standard)
· Fitted tarp with ridgepole
· Simonsen roll tarp with SS endcaps
· Shur-Lok roll tarp (manual crank)
· Hydraulic actuation of ground drive
· D.O.T. light package
65
Simonsen SMC Spreader
Granular
66
Granular
REFDESCRIPTION
SMC1754
1Sprocket
2Chain
3 Block, Chain Tightener
4A Long Shaft
SI1700-20 SI1700-20
SI1700-10 SI1700-12
SI1700-75 SI1700-75
SMC2064
(Early Units With Two Separate Hubs) SI643-10SI643-10
4B Short Shaft
(Present Units With Welded Dual Sprockets)
5 Bearing 1" Flange
SI973-20
SI973-20
6Shaft
SI1033-10 SI1033-11
7Arm
SI1700-70 SI1700-70
8 Wheel Drive Yoke
SI1209-10 SI1209-11
9Shaft
SI1175-10 SI1175-11
10Spacer
SI9341-26 SI9341-26
11 Hub and Rim
SI1377-00 SI1377-00
12Tire
SI1376-00 SI1376-00
13 Tire and Rim Assembly
SI1376-00 SI1376-00
15Sprocket
SI1700-30 SI1700-30
16 Carriage Bolt
SI3907-10 SI9707-10
17 Tightener Block Chain
SI1700-80 SI1700-80
18Chain
SI1249-10 SI1249-10
19Sprocket
SI1248-03 SI1248-03
SI1170-10SI1170-10
20 Handle Nut 3 ⁄ 8
21Sprocket
SI240-00 SI240-00
REFDESCRIPTION
SMC1754
SMC2064
22Sprocket
23 Screw Take-Up SS
24 Screw Take-Up Nut
25 Bearing-Take Up 1"
26 Splice Pin 7" Stainless Steel
27 Bearing 1” Pillow Block
28 Apron Chain 7”
29 Front Roller
30 Tractor Half
31 PTO Shaft (540 RPM)
32 Trailer Half
33Shaft
34Pulley
35Pulley
36Spacer
37Belt
38Shaft
39 Bearing Wooden Insert
40 Spinner Disc c/w Blades
41 Blade, Spinner Disc 4 per Disc
42Bushing
43 U-Joint Assembly
44Gearbox
SI530-0
SI188-00
SI189-00
SI187-10
SI1700-01
SI705-00
SI1700-00
SI591-10
SI616-27
SI616-50
SI616-26
SI578-10
SI780-10
SI1400-10
SI1700-50
SI779-10
SI1589-10
SI1390-00
SI575-01
SI556-02
SI580-02
SI1042-00
SI1900-00
SI530-00
SI188-00
SI189-00
SI187-10
SI1700-01
SI705-00
SI1700-00
SI591-10
SI616-27
SI616-50
SI616-26
SI578-10
SI780-10
SI1400-10
SI1700-50
SI779-10
SI1589-11
SI1390-00
SI575-01
SI556-02
SI580-02
SI1042-00
SI1900-00
67
Simonsen "N" Series Spreaders
Granular
REFDESCRIPTION
N44J
N54J
N64J
QTY
1 Bearing 1" Pillow Block
SI157-00 SI157-00 SI157-00 4
2 Bearing 1½" Pillow Block SI170-00 SI170-00 SI170-00 2
3 Sprocket 1”
SI532-00 SI532-00 SI530-00 1
4 Sprocket 1”
SI782-00 SI782-00 SI533-00 1
5 Spinner Blade
SI556-02 SI556-02 SI556-02 4
6 Metering Door Slide LH
SI568-00 SI568-00 SI568-00 1
7 Metering Door Slide RH
SI569-00 SI569-00 SI569-00 1
SI571-00 SI571-00SI571-001
8 Flange Bearing 5 ⁄ 8”
9 Spinner Disc c/w Blades
SI575-01 SI575-01 SI575-01 1
10Bushing
SI580-02 SI580-02 SI580-02 1
11 Apron Chain 12” SS
SI586-00 SI586-00 SI586-00 1
12 Splice Pin
SI587-00 SI587-00 SI587-00 1
13 Metering Gate Decal (Silver) SI614-00 SI614-00 SI614-00 1
14 Rear Apron Drive Gear Box SI624-30 SI624-30 SI624-30 1
15 Screw, Crank and Brg Assembly SI634-02 SI634-02 SI634-02 1
16 Screw and Crank
SI634-00 SI634-00 SI634-00 1
17 Metering Gate Screw
SI634-01 SI634-01 SI634-01 1
18 Metering Door
SI635-00 SI635-00 SI635-00 1
19 Metering Door Bracket
SI642-00 SI642-00 SI642-00 1
68
REFDESCRIPTION
N44J
20 Rear Apron Drive Roller
21Tire
22 ACME Nut
23 Wheel Drive Yoke
24 Wheel Drive Linkage
25 Handle Nut
26Shaft
27 Shaft 1" x 9½"
28Spindle
29Sprocket
30U-Joint 7⁄ 8" SQ x 1" Round
31 Slip Joint 7⁄ 8" SQ x 1" Round
32 Square Shaft
33 Dual Sprocket
34 SS Chain #50
35 Wheel Drive Tire
36 Wheel Drive Assembly
37 Gearbox Spinner Disc
38 Gearbox Bracket
SI643-00 SI643-00 SI643-00 1
SI1133-01 SI758-25 SI1023-00 4
SI1050-00 SI1050-00 SI1050-00 1
N/A
N/A
SI1162-00 1
N/A
N/A
SI1167-00 1
SI1170-00 SI1170-00 SI1170-00 1
SI1033-01 SI1033-01SI1173-00 1
SI1175-00 SI1175-00 SI1175-00 1
SI1152-00 SI1152-00 SI1191-00 4
SI1200-00 SI1200-00SI1200-00 2
SI1202-00 SI1202-00 SI1202-00 2
SI1203-00 SI1203-00 SI1203-00 1
SI1212-01 SI1212-01 SI1212-00 1
SI1248-02 SI1248-01 SI1248-00 1
MIRC50SS MIRC50SS MIRC50SS
SI1376-00 SI1376-00 SI1376-00 1
N/A
N/A
SI1407-00 1
SI1900-00 SI1900-00 SI1900-00 1
SI1585-00 SI1585-00 SI1585-00 1
N54J
N64J
QTY
Granular
Front and Left Side View
REFDESCRIPTION
N44J
1 Bearing 1" Pillow Block SI157-00
2 Spring Take-Up
N/A
3 Bearing Take-Up 1"
SI187-00
4 Screw Take-Up SS
SI188-00
5 Take Up Screw Nut
SI189-00
6 Spinner Blade
SI556-02
7 Spinner Disc c/w Blades SI575-01
8Bushing
SI280-00
9 Front Apron Gear Box
SI623-50
10 Rear Apron Gear Box
SI624-30
11 Hitch Pin
SI1013-00
12 Setting Guide Top
SI1024-00
13 Gate Setting Guide Bottom SI1026-00
14 Top and Bottom Assembly SI1027-02
15 Slip Joint 1" x 1"
SI1037-00
16 Safety Chain and Hook SI1154-00
17 Outer Race
SI610-03
18 Outer Cup
SI610-06
19 Wheel Bolt
SI1151-05
20Dustcap
SI610-04
21 Wheel Drive Yoke
SI1592-00
22Wheel
SI1140-00
23 Wheel Drive Linkage
N/A
24 Tie Bolt
SI1168-00
25 Hub c/w Races
SI1150-00
26Spindle
SI1152-00
N54J
N64J
QTY
SI157-00
N/A
SI187-00
SI188-00
SI189-00
SI556-02
SI575-01
SI580-00
SI623-50
SI624-30
SI1013-00
SI1024-00
SI1026-00
SI1027-02
SI1037-00
SI1154-00
SI610-03
SI610-06
SI1151-05
SI610-04
SI1592-00
SI758-10
N/A
SI1168-00
SI1150-00
SI1152-10
SI157-00 4
SI173-00 1
SI187-00 2
SI188-00 2
SI189-00 2
SI556-02 4
SI575-01 1
SI580-021
SI623-50 1
SI624-30 1
SI1013-00 1
SI1024-00 1
SI1026-00 1
SI1027-02 1
SI1037-00 1
SI11154-00 2
SI1161-01 4
SI1161-03 4
SI1161-06 2
SI1161-07 4
SI1162-00 1
SI1165-00 4
SI1167-00 1
SI1168-00 2
SI1190-00 4
SI1191-00 4
REFDESCRIPTION
N44J
N54J
N64J
QTY
27Seal
28 Inner Race
29 Inner Cup
30U-Joint 7⁄ 8" SQ x 1" Round
31 Slip Joint 7⁄ 8" SQ x 1" Round
32 7⁄ 8" SQ Shaft
33 Cast Hitch
34 Wheel Drive Tire
35 Wheel Drive Rim
36 Tire and Rim Assembly
37 Bearing Wooden Insert
38 Wheel Drive Handle
39 Gear Box Bracket
40 Drive Shaft
43 Idler Roller
44 Tumbling Rod
48 Jack Handle
49 Tongue Jack c/w Bracket
50 Spindle Nut
51 Spindle Washer
SI1151-01
SI1151-02
SI1151-03
SI1202-00
SI1293-00
SI974-10
SI1214-00
SI1376-00
SI1377-00
SI1377-01
SI1390-00
N/A
SI1585-00
SI552-110
SI1591-00
SI616-00
SI1394-03
SI1484-00
SI1152-02
SI1152-01
SI1151-01
SI1151-02
SI1151-03
SI1202-00
SI1293-00
SI974-10
SI1214-00
SI1376-00
SI1377-00
SI1377-01
SI1390-00
N/A
SI1585-00
SI1589-01
SI1591-00
SI616-00
SI1394-03
SI1484-00
SI1152-02
SI1152-01
SI1192-01 4
SI1192-02 4
SI1192-03 4
SI1202-00 1
SI1293-00 1
SI1213-00 1
SI1214-00 1
SI1376-00 1
SI1377-00 1
SI1377-01 1
SI1390-00 2
SI1407-00 1
SI1585-00 1
SI1589-00 1
SI1591-00 1
SI616-00 1
SI1394-03 1
SI1484-00 1
SI1191-02 4
SI1191-01 4
69
simonsen smc4816 tender
Granular
Simonsen SMC4816 Tender
itemPARTDESCRIPTION
1
SI306-02
2
SI410-01
3
SI496-01
4
SI541-01
5
SI1336-01
6
SI1373-01
7
SI1544-02
8
SI1544-03
9
SI1544-05
10
SI1545-02
11
SI1545-30
12
SI1545-35
13
SI1545-37
14
SI51545-31
15
SI1545-41
16
SI1548-32 17
SI4768-00
18
SI9120-16
70
1½" Set Collar with 25 ⁄ 8" O.D. Flat Washer
1¼" Flange Bearing (two bolt mounting)
Drive Shaft for Delivery Auger (used with grease chamber)
Round Bolt-on End for Delivery Auger (used with grease chamber)
Tail Shaft for Delivery Auger (8" Long)
U-Joint (1¼" Round x 1¼" Round)
Flighting for Delivery Auger (9" Dia. Full Pitch) (Less Shafts)
Stainless Steel 15' - 10½' Long
Tube and Hopper Assembly for delivery auger (less extension for hopper and all other bolt on parts) (includes clean out door)
Stainless Steel 16' - 5¾" Long (length of tube and hopper)
Extension for Hopper (Bolt-on)
Support Shaft for Delivery Auger (1¼" Dia. x 16" Long)
Grease Chamber
Hydraulic Motor for Delivery (two 11 ⁄ 16" O-Ring Ports)
Clean Out Door
Willmar Spreader
Granular
Willmar Spreader
REFDESCRIPTION
S600-800
S500
REFDESCRIPTION
S600-800
S500
1 PTO Support 10 Tarp with Shock Cord 14 Rear Gate
21 Rear End 24Bushing-Hardwood
26Divider
29 Spindle 35 Rear Belt Shield 36 U-Bolt 38 Shackle Arm 39 Main Leaf Spring c/w Item 39
39A Complete Leaf Spring
40 Spring Bolt
42 Clip Plate
45 Grease Seal
46 Inner Bearing Cone WI15152
WI17469
WI21193
WI16080
WI16548
WI16133
N/A
WI15232
WI16717
WI15162
WI15445
WI16718
WI15129
WI16716
WI15433
WI15434
WI15152
WI17471
WI21193
WI16080
WI16548
WI16133
WI15066
WI15232
WI15058
WI15504
WI20611
WI20538
WI15506
WI15059
WI15487
WI15488
47
48
49
50
51
52
56
57
58
59
60
62
64
66
67
WI15442
WI10681
WI15265
WI15435
WI15441
WI15436
WI15348
WI15435
WI15130
WI15154
WI14341
WI15443
WI10828
WI22432
WI15503
WI15494
WI10680
WI14875
WI19123
WI15493
WI15490
WI15491
WI19122
WI15129
WI15500
WI15503
WI19125
WI10827
WI22432
WI25415
Inner Bearing Cone
Sprocket Ring-27 Tooth Ground Drive Hub and Sprocket
Hub-Brake w Bearing Cups
Outer Bearing Cup
Outer Bearing Cone
Hub Cap
Hub-Plain w/Bearing Cups Equalizer Bolt
Equalizer Arm w/Bushings Bushing (c/w item 59)
Wheel Nut
Wheel Jack Assembly
Bushing Headingley, MB: 204-885-8260 Saskatoon, SK: 306-244-4448 Calgary, AB: 403-236-3378 Ayr, ON: 519-740-7188
71
Willmar Spreader
Granular
Spinner Drive and Conveyor
REF DESCRIPTION S600-800
S500
REF DESCRIPTION 3
9
10
11
14
19
21
22
26
31
35
WI10636
WI10454
WI10487P
WI10460
WI10464
WI10645
WI16584
WI15226
WI16583
WI16595
WI10513
WI10511
WI10636
WI10454
WI10487P
WI10460
WI10464
WI10645
WI16584
WI15226
WI16583
WI16595
WI10513
WI10506
36
37
40
41
42
43
44
45
47
49
Bearing 1" PB Sheave, 8"
V-Belt Sheave, 6"
V-Idler Sheave, 6½"
Bearing, 3 Hole Flange
Distributor Fan
Fan Blade Kit
Distributor Blade-Right
Distributor Blade-Left
Splice Pin
Conveyor Chain
S600-800
Rear Line Shaft WI21540
Front Line Shaft WI21540
Take-Up Bearing WI10652
Front Roller WI15195
Conveyor Drive Chain WI19129
Connector Link
WI10633
Rear End Sprocket WI12363
Rear Drive Roller and Shaft WI16597
Set Collar
WI21533
Bearing 1" PB WI10636
PTO Assembly (Not Shown) WI22001
S500
WI21539
WI114805
WI10652
WI15195
WI10630
WI10633
WI12363
WI16597
WI21533
WI10636
WI22001
Ground Drive
Decals
72
S500
Application Rate Decal (11 L x 15 Tires)
Application Rate Decal (12.5 L x 15 Tires)
Dial Decal-Green
WI19503
WI19501
WI17395
WI19498
WI19501
WI17395
S500
51 Sheave, 4½"
52 Connector Link 53 Gnd. Drive Engaging Arm
54 Engaging Lever 55 Bushing, Nylon 56 Ground Drive Linkage 57 Bearing 1" PB 58 Drive Sprocket 59 Spring 60 Ground Drive Jack Shaft 61 Slip Clutch Assembly 62 Slip Clutch Nut 63 Slip Clutch Spring 64 Shield 65 Slip Clutch Floating Jaw 66 Slip Clutch Hub 67 Sprocket 68 Ground Drive Chain WI10461
WI10575
WI15246
WI15251
WI22547
WI15095
WI10636
WI12368
WI16617
WI15245
WI10663
WI10668
WI10669
WI15244
WI10513
WI10664
WI1066
WI19128
WI10461
WI10575
WO14878
WI15251
WI22547
WI15095
WO10636
WI12368
WI16617
WI15093
WI10663
WI10668
WI10669
WI15244
WI10513
WI10664
WI10666
WI19130
GRANULAR ACCESSORIES
Bin Gate Air Cylinders
Norgren Valves
PARTDESCRIPTION
PARTDESCRIPTION
MIDW316-2
MIMP-31
MI318-DXP
MIK71DA00KS6KV2
Valve Air Single Solenoid 120V
MIK71DA00K32K32
Valve Air Double Solenoid 1
MIK71DA00KS124VDC Valve Air Single ¼" Port
Cylinder Air 6" Stroke (Less Clevis)
Clevis for DW316-2
Cylinder Air 8" Stroke
¼" Ports
Buckets
PARTDESCRIPTION
PARTDESCRIPTION
MI5012-DXP
MIBKT9X6
MIBKT10X6
Cylinder Air 12" Stroke
Airline Fittings
PARTDESCRIPTION
MI12-020-0600
MI12-040-0600
MI12-060-0600
MI12-425-0628
MI12-425-0638
MG12-447-0628
MG12-447-0638
Fitting Air Joiner ¼"
Fitting Air Elbow Joiner
Fitting Air Tee 3 ⁄ 8"
Fitting Air MPT Straight ¼"
Fitting Air MPT Straight 3 ⁄ 8"
Fitting Air MPT Elbow ¼"
Fitting Air MPT Elbow 3 ⁄ 8"
Granular
Blender Air Cylinder
Bucket Poly 9" x 6" CCHD
Bucket Poly 10" x 6" CCHD
Belting
PARTDESCRIPTION
MIBCV12
MIBCV16
MIBCV24
Belt PVC Low Temp 12"
*Also available in smooth and crescent top
73
Layco Systems by Yargus
Declining Weight Blend System
If your fertilizer needs require a faster, more accurate blend system, your best choice is the Layco Declining Weight Blend
System. This system is superior to other multi-feed Blender Systems because it features stainless steel rotary valves to
meter the product and the PLC computer to control your NPKs, resulting in a better fertilizer blend.
Once the blend formulation is entered into the electronic keypad, the PLC computer sends the rate information to the
proper rotors, then continuously monitors the RPMs to ensure accurate blends. Use of the rotary valve makes the Layco
Declining Weight Blend System easy to clean and service.
Declining Weight Blend System
2 to 10 Hopper Design. 120 to 300 Tons per Hour Capacity
Granular
Vertical Single-Unit Blender
6,8,10 and 13 Ton Batch Availability
Tower Blend System
150 to 200 Ton Storage
74
Super Flow Rotary Blend System
5,6,8 and 10 Ton Batch Availability
granular construction department
From CAD Design to Completion
At DyTerra, we can take an idea and make it a reality. On-site engineers and our experienced road crews work hand in
hand to complete projects efficiently and on time. Call us today.
Granular
75
Speed King
Granular
Granular Blending Equipment
For nearly fifty years Speed King has been serving the
dry chemical fertilizer industry with quality fertilizer
handling products. Their leading components are the
environmentally friendly vertical screw blending
system, bucket elevators, the original tube conveyor as
well as various trough-roller conveyors for in-plant
use. Speed King’s components are the trusted line for
blending chemical fertilizer and other bulk materials
throughout North America.
76
Speed King Tube Conveyor
Tube Conveyor with 1" Shaft
and Roller in Head Section
PART
1
2
3
4
5
6
7
8
9
10
12
13
14
15
16
17
18
19
20
SK82269200
SK82796400
SK61686200
SK61687000
SK03001500
SK88107800
SK10409100
Varies
SK60196300
SK82264300
SK10319210
SK62153200
SK89763700
SK14969000
SK14970800
SK14971600
SK14972400
SK14973200
SK17678400
SK17679200
SK13816400
SK10317600
MS Discharge Spout
SS Discharge Spout
MS Headframe Assembly
SS Headframe Assembly
1" Bearing
6" x 12" Roller – Lagged
1" x 21½" Shaft
MS or SS Tube - 12"
PVC Return Idler
Return Idler Bracket
10" Half Band
MS Tail Frame Assembly
SS Tail Frame Assembly
Guide Stiffener L SS
Guide Stiffener R SS
Front Panel SS
Strap SS
Back Panel SS
Right Hopper Side
Left Hopper Side
Material Guide
Back Wiper
QTY
1
1
1
1
4
2
2
Varies
Varies
Varies
Varies
1
1
1
1
1
1
1
1
1
2
1
Tube Conveyor with 15 ⁄ 16" Shaft
and Roller in Head Section
The difference is only in the head section.
REFDESCRIPTION
PART
315 ⁄ 16" Bearing
4 6" Lagged Roller
5 Shaft 15 ⁄ 16" x 21"
SK03018900
SK61685400
SK14979900
QTY
2
1
1
Granular
REFDESCRIPTION
8" and 10" Electrical Drive
REF DESCRIPTION
SMALL ELECTRIC 8"LARGE ELECTRIC 10" QTY
21 Square Nut SS
SK01561000
22 1" Bearing
SK03001500
-
2315 ⁄ 16" Bearing
24 Sprocket D48T x 15 ⁄ 16"-
25 Sprocket D20T x 1"
-
26 #50 - 2 x 76 Pitch Chain -
27 Take Up Bracket SS
SK10330900
28 1" x 28½" Shaft
-
29 1" x 16"
SK11888500
30 Shaft 1" x 23½"
SK10001600
-
15 ⁄ 16" x 23¾"
31 Bearing Slide SS
SK81610800
32 Take Up Bolt
SK83106500
33 3½" Lagged Roller
SK88001300
34 Lagged Roller
SK88040100
20 Belt Guard Bracket SS -
SK01561000
SK03001500
SK03018900
SK04513800
SK04514600
SK05222500
SK10330900
SK11697000
SK11888500
-
SK11891900
SK81610800
SK83106500
SK88001300
SK88011200
SK16801300
2
4
2
1
1
1
2
1
1
1
1
2
2
1
1
3
77
Speed King Trough Roller Conveyor
Granular
Trough Roller Outload Conveyor
78
REFDESCRIPTION
16”
24”
REFDESCRIPTION
16”
24”
4 Bearing Slide, Top
5 Bearing Slide, Bottom
6 Take Up ½" x 14"
7 ½" SS Square Nut
8Bearing
9ARoller
9BShaft
10 Strap, Back
11 Back Skirt
12 Side Skirt
13 Strap, Side
14 Load Hopper
17 Return Roller BRKT
18 Return Roller
21 Carrier Roller
23Sprocket
24Sprocket
25 Chain SK16076200
SK16075400
SK83106500
SK01561000
SK03018900
SK88186200
SK16088700
SK16053100
SK16068900
SK16069700
SK16070500
SK83163600
SK13019500
SK60194800
SK60191400
SK04502100
SK04501300
MIRC60MS
SK16076200
SK16075400
SK83106500
SK01561000
SK03033800
SK60355500
SK18640300
SK18639500
SK18656900
SK18622100
SK83934000
SK13019500
SK60195500
SK60192200
-
26 Chain Guard
27 Take Up Bolt
30 Discharge Spout
31 Belt PVC Low Temp
33 Lagged Roller
34Shaft
35Shaft
36Bearing
37Sheave
38Sheave
39Hub
40V-Belt
41 Tail Cap
42 Guard Body
43 Guard End Plate
SK89215800
SK83104000
SK83166900
MGBCV16
SK88826300
SK16088700
SK12217600
SK03001500
SK04259800
SK04293700
SK04388500
MIB51
SK83081000
SK15911100
SK15910300
SK83104000
SK83911800
MGBCV24
SK60197100
SK18636100
SK04285300
SK04406500
MIB73
SK8318000
SK18624700
-
Speed King 6' Tripper
Granular
Speed King 6' Tripper
REFDESCRIPTION
24"
2 Lagged Roller
3 Flange Bearing 1"
4 Shaft 1" x 23"
5 Belt Spliced Both Ends
6 Bearing Mount
7 Take Up Bracket
8 Take Up Bolt 3 ⁄ 8"
9Nut 3 ⁄ 8" Square
10 Shaft 1" x 21"
11 Flange Bearing
12 Lagged Roller 3½" X 16"
13Shaft 15 ⁄ 16" X 25"
SK88558200 SK88558200
SK03001500 SK03001500
SK10001600 SK10001600
11' 10"
11' 10"
SK13379300 SK13379300
SK16186900 SK16186900
SK83103200SK83103200
SK01560200 SK01560200
SK19603000 SK19603000
SK03018900 SK03018900
SK88186200 SK88186200
SK14230700 SK14230700
16"
REFDESCRIPTION
24"
14Roller
SK81181000
15 Shaft 1" x 27"
SK16187700
17 V-Groove Wheel
SK65080400
21V-Belt
MIB60
22Sheave
SK04255600
23 Belt Guard
SK16203200
24 Belt Guard Bracket (front) SK16801300
25 Belt Guard Bracket
SK15745300
26 Roller Assembly
SK72035900
27Cover
SK83211300
28 Take Up Bolt ½"
SK83106500
29 Nut ½" Square
SK01561000
16"
SK81181000
SK16187700
SK65080400
MIB83
SK04255600
SK16204000
SK16801300
SK15745300
SK72035900
SK83211300
SK83106500
SK01561000
79
Speed King Trough Roller S-Wrap
Granular
16" Trough Roller
12" Trough Roller
ref Part Description
SK60305000 1
SK19536200 2 SK19533900 3 SK19532100 4 SK19673300 5 SK60392800
6 SK80011000 SK19603000 7 SK03018900 8 SK03001500 12" S-Wrap Assembly
S-Wrap Frame
Material Guide RH
Material Guide LH
Mounting Angle
Lagged Roller 3.5" x 12.5"
Roller 3.5" x 12.5"
Shaft 1"
Bearing 1.313" 2B Flange
Bearing 1" 2B Flange
QTY
1
1
1
1
4
2
1 1
4
2
24" Trough Roller
80
ref Part
Description
SK60305000
1
SK19537000 2 SK19533900 3 SK19532100 4 SK19673300 5 SK60355500 6 SK81574600
7 SK03018900 8 SK03001500 24" S-Wrap Assembly
1
S-Wrap Frame
1
Material Guide RH
1
Material Guide LH
1
Mounting Angle
4
Lagged Roller 3.5" x 24"
w/ 1.313" Shaft
2
Roller 3.5" x 24"
w/ 1.313 Shaft 1
1
Bearing 1.313" 2B Flange 4
Bearing 1" 2B Flange
2
QTY
ref Part 1
2
3
4
5
6
7
8
SK60393600 SK19531300 SK19533900 SK19532100 SK19673300 SK60560000 SK80682800
SK03018900 SK03018900 Description
16" S-Wrap Assembly
S-Wrap Frame Material Guide RH
Material Guide LH
Mounting Angle
Lagged Roller 3.5" x 12.5"
Roller 3.5" x 16"
w/ 1.313" Shaft
QTY
1 1
1
1
4
2
1
4
2
service department
Transport Canada 1 and 5 year Inspections - NH3, LPG and Fuel
·TDUs
· Nurse Tanks
· Single Barrel Bobtails (with man-way)
· NH3 and LPG Tankers
· Mini Fuel Tanker (ON)
· Fuel Truck (ON)
· Fuel Truck (ON)
Maintenance & Repairs
· Hose Testing
· Pump Rebuilds, Replacement & Repair
· Plumbing Upgrades
· Safety Shutdown Troubleshooting & Repair
Meters
· 2" & 3" Meter Calibrations
· Gravametric Meter Inspections
· Volumetric Meter Inspections
· Measurement Canada Device Certifications
· Measurement Canada Broken Seal Reports
Mobile NH3 Prover
Mobile Service Unit
Mobile Propane Prover
Service
Internal Crack Repair
81
CERTIFICATIONS
R
R
AgencyCertificationDescription of the Certification
Transport Canada
Transport Canada, Certificate of Registration National Board of Pressure
Vessel Inspectors (USA)
R-Stamp,
Certificate of Authorization
CWB CWB, Certification to CSA
(Canadian Welding Bureau)
Standard W47.1 - Division 2
COR Certificate of Recognition
ISNetworld
ISN Members of ISN
Measurement Canada
Certificate of Designation
Department of Transport
Ministerial Authorization
Service
Provincial Certificate Quality Program of Authorization
Certificate of Authorization
Quality Control Program
Certificate of Registration
82
Manufacture, Modification, Assembly, Repair, Test, Retest,
or Inspection of Highway Tanks and Portable tanks in
accordance with CSA Standard B620. Shop and Field
Metallic Repairs and/or Alterations. Shop and Field
Certification of companies for Fusion Welding of Steel.
Manufacture, repair, welding and fabrication
of fertilizer distribution facilities.
Approved Safety Program
Approved Safety Program
Authorized ASP for retail and bulk certification of
petroleum and LPG Meters. (Registration Certificate R-414)
Authorization to apply the NSM (National Safety Mark)
The assembly, alteration and repair of pressure vessels,
highway, portable vessels and related piping and
components. (Shop and Field)
Repair and Alteration of Pressure Vessels and Construct,
Repair and alteration of Process Piping (Shop and Field)

TAbLe of conTenTs

Transcription

Similar documents

407-613p - Great Plains Manufacturing