holland coupling products

Transcription

2012
HOLLAND COUPLING PRODUCTS
PINTLE HOOK, COUPLER AND DRAWBAR
CATALOG AND SPECIFICATION GUIDE
NEW TS
UC
PROD
XL-PH10397SG-en-US Rev B
YOUR COMPLETE SOURCE
FOR COMMERCIAL VEHICLE
PRODUCT SOLUTIONS
In 2006, two industrial icons merged
to form SAF-HOLLAND, a global leader in
the design and manufacture of high-quality
components and systems for the commercial
vehicle industry. Today, SAF-HOLLAND represents
a range of brands providing suspension/axle
systems, fifth wheels, kingpins, coupling products,
landing gear and liftgate solutions for truck, tractor,
bus, and trailer applications.
➤
SEVERE-DUTY VOCATIONAL
➤
FIFTH WHEELS
➤
LANDING GEAR
➤
KINGPINS
➤
TRAILER AXLES/BRAKES
➤
BUS AIR-RIDE SUSPENSIONS
➤
COUPLINGS
➤
AIR-RIDE SUSPENSION/
➤
STEER AIR-RIDE
➤
LIFTGATES
➤
MECHANICAL SUSPENSION/
AIR-RIDE SUSPENSIONS
AXLE SYSTEMS
AXLE SYSTEMS
➤
KINGPINS
www.safholland.com
SUSPENSIONS
Contents
Reference Sections
Part Number Index ............................................................................................................................................................................. 2
Replacement Parts Numbers ............................................................................................................................................................... 4
National Stock Number (NSN) Reference Chart................................................................................................................................... 4
Coupling Products by Mounting Type and Rated Capacities ............................................................................................................... 5
Identifying Marks on Pintle Hooks, Couplers and Drawbars ................................................................................................................ 6
Drawbar Compatibilty Chart ............................................................................................................................................................ 42
General Safety Information ............................................................................................................................................................. 60
Coupling System Selection ............................................................................................................................................................... 62
Operating Conditions ....................................................................................................................................................................... 63
Cushioning Systems ......................................................................................................................................................................... 63
Mounting Information ...................................................................................................................................................................... 64
Glossary ........................................................................................................................................................................................... 65
Pintle Hooks
Rigid Mount
BH-200RN41 & BH-50mmRN41 .......................................... 8
PH-10RP ............................................................................. 9
PH-T-60-AOL-8 & PH-T-60-S10646 ................................... 10
PH-30RP ........................................................................... 11
Swivel Mount
PH-30SA ........................................................................... 12
PH-30SB ........................................................................... 13
PH-T-60-AOS-L-8 .............................................................. 14
PH-760 ............................................................................. 15
PH-775-01552 .................................................................. 16
PH-775SL.......................................................................... 17
Rigid Mount - Air Cushioned
PH-300 & PH-300-R .......................................................... 18
PH-210 ............................................................................. 19
PH-310 ............................................................................. 20
PH-400 & PH-400-H ......................................................... 21
PH-410 ............................................................................. 22
PH-550 ............................................................................. 23
PH-419 ............................................................................. 24
Air Chamber Assemblies and Mounting Kits ..................... 26
Couplers
CP-400-H ............................................................................. 28
CP-360................................................................................. 29
CP-740 & CP-730................................................................. 30
PH-990ST71 ......................................................................... 31
PH-995SH71 ........................................................................ 32
PH-775 and PH-995 Interchangeability ................................. 33
Ball Hitch
BH-50 .................................................................................. 34
XL-PH10397SG-en-US Rev B 12-2011 Amendments and errors reserved. © SAF-HOLLAND, Inc.
Couplings (non-road) for Industrial/GSE
CP-400-GSE & CP-400-CA ................................................... 36
XA-T-150-AF and CP-T-150-S02986..................................... 37
EH-3050............................................................................... 38
EH-20/40/60 Replacement Parts ........................................... 39
DB-010EJ1 & DB-020FK1 ..................................................... 40
Drawbars
DB-1250-3 ........................................................................... 44
DB-1249-2H ......................................................................... 44
DB-040DQ1 ......................................................................... 45
DB-060FQ1 .......................................................................... 45
DB-100FQ1 .......................................................................... 45
DB-1228-1 ........................................................................... 46
DB-1238 .............................................................................. 46
DB-1245-1 ........................................................................... 46
DB-1235-1 ........................................................................... 46
DB-1235-3 ........................................................................... 46
DB-1400 .............................................................................. 48
DB-1422 .............................................................................. 48
DB-1400AC (Air Cushioned)................................................. 49
DB-1407 Series .................................................................... 50
DB-1407-SE.......................................................................... 51
DB-1407-S ........................................................................... 51
DB-045BW1 ......................................................................... 52
DB-45BS1............................................................................. 52
DB-610-30 ........................................................................... 53
DB-1249-49 ......................................................................... 53
Coupling Products & Accessories
Drawbar Guides ................................................................... 56
Pintle Hook Wear Gages ...................................................... 56
Plunger Adjustment Gages ................................................... 56
Tow Hooks ........................................................................... 57
Drawbar Hinge and Frame Brackets ..................................... 57
Dolly Master ......................................................................... 58
1
Part Number Index
PART NUMBER
AA-52550-1
AA-52550-2
AA-52550-4
AA-55220-3 74410
BH-200RN
BH-200RN41
BH-200RN51
BH-200RN8
BH-50
BH-50mmRN
BH-50mmRN41
CP-360
CP-360-S01340
CP-380
CP-380-A
CP-400-5A
CP-400-CA
CP-400-GSE
CP-400-H
CP-400-S04729
CP-730
CP-730-S05745
CP-740
CP-T-150-S02986
DB-010EJ1
DB-020FK1
DB-030DQ1
DB-040DQ1
DB-045BS1
DB-045BW1
DB-060FQ1
DB-100FQ1
DB-1228-1
DB-1235-1
DB-1235-3
DB-1238
DB-1245-1
DB-1249-2H
DB-1249-49
DB-1249-S06588
DB-1250-3
DB-1385
DB-1400
DB-1400AC
DB-1400AC-1
DB-1400AC-2
DB-1400AC-3
DB-1400AC-4
DB-1407
DB-1407-L-1
DB-1407-S
DB-1407-S-1
DB-1407-SE
DB-1407-SE-1
DB-1422
DB-610-30
EH-20/40/60
EH-3050
MH-1800-D
PH-10RP
PH-10RP41
PH-16-B
PH-200
PH-200-1
PH-207A
PH-210
PH-210RA11
PH-210RA21
2
PAGE NO.
6
6
6
6
5, 42
8
4
39
5, 34
5, 39, 42
8
4, 5, 6, 29, 42
4
6
6
6
5, 6, 36
5, 6, 36, 42
5, 6, 28, 42
4
5, 30, 42
4
5, 6, 30, 42
37
5, 6, 40, 42
5, 6, 40, 42
6, 42
5, 6, 45, 42
5, 52, 43
5, 6, 52, 43
4, 5, 6, 45, 43
5, 6, 45, 43
5, 6, 42, 46, 47
4, 5, 6, 42, 46, 47
5, 6, 42, 46, 47
4, 5, 6, 42, 46, 47
5, 6, 42, 46, 47
4, 5, 6, 42, 44
4, 5, 6, 42, 53
4
4, 5, 6, 42, 44
4
5, 6, 43, 48
5, 6, 43, 49, 63
6, 49
6, 49
6, 49
6, 49
5, 50
50, 43
5, 6, 43, 51
43, 50
5, 6, 43, 51
43, 50
5, 6, 43, 48
4, 5, 6, 43, 53, 63
39
5, 38, 39, 42
6
5, 39, 42, 56
9
4, 6
6, 56
5, 6, 19, 26, 42, 56, 63
19, 26
19
PART NUMBER
PH-210RF11
PH-210RM11
PH-210RN11
PH-210RN21
PH-30
PH-300
PH-300-1
PH-300-R
PH-300-R-1
PH-30RP
PH-30RP41
PH-30RP51
PH-30SA
PH-30SA41
PH-30SA51
PH-30SB
PH-30SB41
PH-30SB51
PH-310
PH-310RA11
PH-310RA21
PH-310RF11
PH-310RM11
PH-310RN11
PH-310RN21
PH-35
PH-400
PH-400-1
PH-400-1-H
PH-400-H
PH-410
PH-410RA11
PH-410RA21
PH-410RF11
PH-410RM11
PH-410RN11
PH-410RN21
PH-419
PH-419RA11
PH-419RA21
PH-419RF11
PH-419RM11
PH-419RN11
PH-419RN21
PH-550
PH-550-1
PH-75
PH-760
PH-760M-A
PH-760M-X
PH-775
PH-775-01552
PH-775-D
PH-775-E
PH-775SL11
PH-775SL21
PH-775SN11
PH-775SN21
PH-990ST71
PH-995SH71
PH-995SN71
PH-T-100-A
PH-T-125-A
PH-T-126-A
PH-T-370
PH-T-60-AL
PH-T-60-AOL-8
PAGE NO.
26
19, 26
19, 26
19
4, 6, 56
5, 6, 18, 26, 42, 56, 63
17, 26
5, 18, 26, 42, 63,
17, 26
5, 39, 42, 56
6, 11
4, 11
5, 42, 56, 63
12, 63
12
5, 42, 56, 63
13
13
5, 6, 20, 26, 42, 56, 63
20, 26
20
26
20, 26
20 ,26
20
6, 56
5, 6, 21, 26, 42, 56, 63
26
26
5, 6, 21, 26 ,42, 56, 63
5, 6, 22, 25, 42, 56, 63
26, 22
22
26
26, 22
26, 22
22
5, 6, 22, 24, 25, 26, 42,
56, 63
24, 26
24
26
24, 26
24, 26
24
5, 26, 42, 56, 63
26
4
5, 6, 15, 42, 56
4
4
5, 16, 42, 56
4, 16, 33
33, 16
4
6, 17, 63
4, 6, 17
33, 17
33, 17
5, 6, 31, 42
5, 16, 32, 33 ,42
33
6
6
6, 56
4
4, 6
4, 5, 6, 10, 39, 42, 56
PART NUMBER
PAGE NO.
PH-T-60-AOS-L-8
PH-T-60-C
PH-T-60-S08350
PH-T-60-S10646
PH-T-90-A
RK-02536
RK-02772
RK-03179
RK-05961
RK-06683
RK-1020
RK-10244-A
RK-10291
RK-10545
RK-10545-1
RK-10632
RK-10632-1
RK-10636
RK-10636-1
RK-11438
RK-11439
RK-11440
RK-11510
RK-62-O
RK-775
RK-S10646
RK-T-150-S02986
RK-T-551
RK-T-61
TF-03147
TF-03147-10
TF-10520
TF-10521
TF-10522
TF-10523
TF-10612
TF-10960
TF-11402
TF-675
TF-675-1
TH-10050-3
TH-10050-3B
TH-10050-3L
TH-10050-3R
TH-10050-5
TH-10050-5B
TH-10050-5L
TH-10050-5R
XA-01154
XA-01740
XA-02234
XA-02235
XA-02240
XA-02241
XA-02555
XA-02556
XA-02608
XA-02721
XA-04108
XA-04156
XA-04297
XA-04337
XA-04430
XA-05263
XA-05264
XA-05490
XA-05491
XA-05492
4, 5, 6, 14, 42 ,56
4
4
10
6, 56
18, 21
15
18
15
34
57
39
31, 32
17, 19, 20, 22, 24
17, 19, 20, 22, 24
9, 11, 12, 13
9, 11, 12, 13
8
8
39
39
39
17
10 ,14
16
10
37
31
14
56
56
56
56
56
56
56
56
56
58
58
57
57
57
57
57
57
57
57
29
30
34
34
34
34
56
56
18, 19, 20, 21, 22, 24, 26
34
34
18, 19, 20, 21, 22, 24, 26
49
34
34
34
34
23
23
23
Part Number Index
PART NUMBER
XA-05494
XA-05738
XA-05739
XA-05740
XA-05754
XA-05798
XA-05799
XA-05807
XA-05809
XA-05833-S
XA-05833-SE
XA-06101
XA-07760
XA-07839
XA-08361
XA-08364
XA-08370
XA-08375
XA-08636
XA-09862
XA-10008
XA-10198
XA-10244-A
XA-10286
XA-10287
XA-10546
XA-10802-F
XA-10802-R
XA-10891
XA-11042
XA-1403
XA-1404-1
XA-1404-2
XA-1404-3
XA-1404-4
XA-199-1
XA-199-4
XA-199-6
XA-211
XA-2524-R-12
XA-2524-R-13-1
XA-392
XA-393
XA-394
XA-401-X1
XA-401-X3
XA-402-X1
XA-404-X
XA-610-23
XA-686
XA-687
XA-694
XA-732
XA-736
XA-736-A
XA-749-1
XA-766-2Z
XA-768
XA-780-1
XA-782
XA-T-150-AF
XA-T-2
XA-T-317-8
XA-T-361
XA-T-362
XA-T-56
XA-T-60-A
XA-T-88
PAGE NO.
23
30
30
30
23, 26
51
51
51
51
51
51
29, 30
29
58
58
58
58
58
15
23, 26
31, 32
26
39
31
31, 32
17, 33
12
12
13
30
49
49
49
49
49
10, 14
16
15
36
58
58
29
29
29
36
28
28, 36
28, 36
52, 53
58
58
58
30
15, 30
15
16, 32, 33
16
15
17
16, 17, 32
37
37
31
31
31
12, 44
6
14, 29, 30
PART NUMBER
XB-01996
XB-02724
XB-02745
XB-03103
XB-03104
XB-03731
XB-0437
XB-04473
XB-04847
XB-05493
XB-05496
XB-05497
XB-05498
XB-05499
XB-05514
XB-05679-2
XB-05788
XB-05789
XB-05808
XB-05813
XB-05825
XB-06134
XB-06150
XB-06181
XB-0839
XB-10089
XB-10109
XB-1020
XB-10245
XB-1031
XB-10537
XB-10738
XB-11048
XB-11157
XB-120-2
XB-121
XB-127
XB-128
XB-16594
XB-165945
XB-166321
XB-196-3
XB-21-S-187-1250
XB-21-S-250-1250
XB-21-S-312-1250
XB-21-S-375-1750S
XB-21-S-500-1000
XB-3094
XB-3547
XB-382
XB-403
XB-5
XB-639
XB-646
XB-698
XB-708
XB-757
XB-758
XB-767
XB-767-10
XB-770-1
XB-771-1
XB-772
XB-773
XB-780-1
XB-781-1
PAGE NO.
58
34
34
18, 21, 23
17, 18, 19, 20, 21, 22,
23, 24
30
31, 32
28, 36
37
23
23
23
23
23
34
58
50, 51
50, 51
51
51
23
23
30
36
58
15
28, 36
39
58
17, 19, 20, 22, 24
31, 32
8, 9, 10, 11, 12, 13, 14
8, 9, 10, 11, 12, 13
16
44, 52, 53
15
15
49
18, 29, 20, 21, 22, 23,
24, 26
26
23
30
34
30
39
30
29
34
28, 36
28, 30, 36
29
34
37
58
28, 36
16
14
12, 14, 15, 16, 29, 30,
32, 52, 53
16
31
15
15
14, 15
16, 31, 32
16, 17, 32
PART NUMBER
XB-C-375-C-125
XB-C-375-C-150
XB-C-95
XB-E-540
XB-E-552-1
XB-H-38
XB-HNH-34-F
XB-PWM-38-78
XB-S10647
XB-T-199
XB-T-20-2
XB-T-306
XB-T-307
XB-T-316-A
XB-T-318
XB-T-33-A
XB-T-361
XB-T-362
XB-T-377
XB-T-45-1
XB-T-52
XB-T-56
XB-T-60
XB-T-61
XB-T-69-A
XB-T-69-C
XB-T-89
XB-T-89-4
XB-T-992
XB-T-993
XB-T-993-1
XB-T-9N
XB-TLN-1000-7
XD-01155-1
XD-02275-1
XD-02384-2
XD-10286
XD-10570
XD-10572
XD-10573
XD-11047
XD-11047-10
XD-11231
XD-361
XD-380
XD-400
XD-400-5-1
XD-5275
XD-5315
XD-731
XE-01544-1
XE-02137-HLH
XE-10373
XE-10634
XE-1228
XE-1230
XE-1235
XE-1245
XE-1249
XE-1249-2H-10
XE-1249-48
XE-1385
XE-T-87
XE-T-91
XW-1235
XW-1249-48
PAGE NO.
58
34
58
58
16
34
15
34
17, 19, 20, 22, 24
18, 19, 20, 21, 22, 23,
24, 26
13, 29, 30
31
31
44, 52, 53
44, 50, 52, 53
29
31
31
29
14
12, 13
12, 13
12, 13, 15, 30, 44
31, 32, 58
58
8, 13, 58
14
8, 9, 10, 11, 12, 13, 14
31, 32
31, 32
31, 32
12, 13, 44
31, 32
6
6
6
6
6
6
6
56
56
6
6
6
6
6
57
57
6
18, 19, 20, 21, 22, 23,
24, 26
6
6
56
6
6
6
6
6
6
6
6
6
6
6
6
3
Replacement Part Numbers & NSN Reference Chart
Replacements for Discontinued Models
Discontinued
Replaced By
CP-380 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CP-400-CA
CP380-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CP-400-H
CP-400-5A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XA-T-150-AF*
DB-1250-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DB-040DQ1
DB-1307-S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Discontinued
DB-1385 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DB-060FQ1
EH-20/40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EH-3050
PH-16-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BH-200RN51
Discontinued
Replaced By
PH-200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PH-210RA11
PH-200-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PH-210RN11
PH-207A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Discontinued
PH-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PH-30RP41
PH-75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Discontinued
PH-T-60-AL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PH-10RP51
PH-T-90-A & PH-T-100-A . . . . . . . . . . . . . . . . . . . PH-30SA41
PH-T-125-A & PH-T-126-A . . . . . . . . . . . . . . . . . . PH-30SB41
* Mounting hole pattern different
National Stock Number* (NSN) Reference Chart
*also refered to as ‘NATO’ Stock Number
HOLLAND Cage Code – 74410
HOLLAND Casting Code – HLH
NSN
DESIGNATED HOLLAND
MODEL NUMBER
MODEL STATUS
CURRENT
HOLLAND MODEL
PINTLE HOOKS
2540012653887
2540006519484
2540007072564
2540007760103
2540008359039
2540008916831
2540012819723
2540013373725
2540013768063
2540013892221
2540014759206
2540015070802
2540015306881
2540015584395
PH-16-B
PH-T-60-C
PH-T-370
PH-760M-X Series
PH-30
PH-T-60-AOL-8
PH-T-60-AL
PH-75
PH-760M-A Series
PH-T-60-AOS-L-8
PH-T-60-AOL-8
PH-775-E
PH-775-01552
PH-T-60-S08350
PH-775SL21
Obsolete
BH-200RN51
Obsolete
No Replacement
Active (special order)
PH-T-370
Active
PH-760M-S Series
Obsolete
PH-30RP51
Active
PH-T-60-AOL-8
Obsolete
PH-10RP51
Obsolete
No Replacement
Active
PH-760M-A Series
Active
PH-T-60-AOS-L-8
Active
PH-T-60-AOL-8
Active
PH-775-E
Active
PH-775-01552
Spec’d no paint – Contact SAF-HOLLAND for information
Active
PH-775SL21
COUPLERS
2540012137842
2540004999407
2540007687455
2540011460115
2540012058577
2540013594964
CP-360
CP-400-5A
CP-400-CA
CP-400-S04729
CP-360-S01340
CP-730-S05745
Active
Active
Active
Active
Active
Active
CP-360
CP-400-5A
CP-400-CA
CP-400-S04729
CP-360-S01340
CP-730-S05745
DB-060FQ1
DB-1385
DB-1238
DB-1235-1
DB-1249-S06588
DB-1250-3
DB-610-30
DB-1249-2H
DB-1249-49
Active
Obsolete
Active
Active
Active
Active
Active
Active
Active
DB-060FQ1
DB-060FQ1
DB-1238
DB-1235-1
DB-1249-S06588
DB-1250-3
DB-610-30
DB-1249-2H
DB-1249-49
DRAWBARS
2540011647252
2540011647252
2540011924699
2540012356865
2540013825836
2540014619306
2540014886221
5306011974369
5306012698693
4
Coupling Products by Mounting Type and Rated Capacities
MODEL
MOUNT
MAXIMUM
VERTICAL LOAD
lb.
kg
MAXIMUM GROSS
TRAILER WEIGHT
lb.
kg
MAXIMUM GROSS
TRAILER WEIGHT WITH
A MAXIMUM VERTICAL
LOAD OF 500 LB. (227 KG)
lb.
kg
PINTLE HOOKS
BH-200RN / BH-50mmRN
PH-10RP
PH-T-60-AOS-L-8
PH-T-60-AOL-8
PH-30RP
PH-30SA
PH-30SB
PH-760
PH-775
Rigid - Hook Rating
Rigid - Ball Rating
Rigid
Swivel
Rigid
Rigid
Swivel
Swivel
Swivel
Swivel
4,000
1,000
2,000
3,600
6,000
6,000
6,000
6,000
9,800
20,000
1,814
454
907
1,633
2,722
2,722
2,722
2,722
4,445
9,072
20,000
10,000
10,000
18,000
30,000
30,000
30,000
30,000
49,000
100,000
9,072
4,536
4,536
8,165
13,608
13,608
13,608
13,608
22,226
45,360
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
Rigid
18,000
18,000
20,000
20,000
20,000
20,000
25,000
8,165
8,165
9,072
9,072
9,072
9,072
11,340
72,000
90,000
100,000
100,000
100,000
100,000
100,000
32,659
40,824
45,360
45,360
45,360
45,360
45,360
Rigid
Rigid
Swivel
Rigid
7,500
3,000
20,000
20,000
3,402
1,361
9,072
9,072
30,000
52,000
100,000
100,000
13,608
23,587
45,360
45,360
Swivel
Swivel
3,000
3,000
1,361
1,361
100,000
100,000
45,360
45,360
8,000
3,629
80,000
36,288
Rigid
Rigid
Weld-On
Weld-On
7,500
500
2,000
4,000
3,402
227
907
1,814
30,000
50,000
10,000
20,000
13,608
22,680
4,536
9,072
Rigid Bolt-On
Rigid Bolt-On
Rigid Bolt-On
Swivel Weld-On
Rigid Bolt-On
Rigid Bolt-on
Swivel Weld-On
Rigid Bolt-On
Rigid Bolt-On
Rigid Bolt-On
Rigid Bolt-On
Swivel Weld-On
Rigid Bolt-On
Swivel Weld-On
Rigid Bolt-On
Rigid Bolt-On
Rigid Weld-On
Rigid Weld-On
Rigid Bolt-On
3,000
4,000
4,500
500
7,000
7,000
500
8,000
8,000
9,000
9,000
9,000
9,000
9,000
15,000
16,000
18,000
18,000
20,000
1,361
1,814
2,041
227
3,175
3,175
227
3,629
3,629
4,082
4,082
4,082
4,082
4,082
6,804
7,258
8,165
8,165
9,072
15,000
20,000
22,000
34,000
35,000
35,000
40,000
40,000
40,000
45,000
45,000
45,000
45,000
45,000
60,000
85,000
90,000
90,000
100,000
6,804
9,072
9,979
15,422
15,876
15,876
18,144
18,144
18,144
20,412
20,412
20,412
20,412
20,412
27,216
38,556
40,824
40,824
45,360
Rigid Weld-On
18,000
8,165
90,000
40,824
‘AIR CUSHIONED’ PINTLE HOOKS
PH-300 / PH-300-R
PH-210
PH-310
PH-400 / PH-400-H
PH-410
PH-419
PH-550
COUPLERS – DROP JAW
CP-400-H
CP-360
CP-730
CP-740
COUPLERS – PIN & CLEVIS
PH-990ST71
PH-995SH71
BALL HITCH
BH-50
COUPLINGS (NON-ROAD) FOR INDUSTRIAL / GSE
CP-400-GSE / CP-400-CA
EH-3050
DB-010EJ1
DB-020FK1
20,000
40,000
9,072
18,144
50,000
60,000
70,000
22,680
27,216
31,752
90,000
90,000
40,824
40,824
60,000
90,000
85,000
85,000
85,000
85,000
85,000
90,000
120,000
120,000
120,000
125,000
27,216
40,824
38,556
38,556
38,556
38,556
38,556
40,824
54,432
54,432
54,432
56,700
120,000
54,432
DRAWBARS
DB-1250-3
DB-1228-1
DB-1238
DB-1407-SE
DB-1235-1
DB-1235-3
DB-1407-S
DB-040DQ1
DB-1245-1
DB-1249-2H
DB-1249-49
DB-045BW1
DB-045BS1
DB-610-30
DB-060FQ1
DB-1407 Series
DB-1400
DB-1422
DB-100FQ1
DRAWBARS ‘AIR CUSHIONED’
DB-1400AC
5
Identifying Marks on Pintle Hooks, Couplers and Drawbars
PART NUMBER
PH-16-B
PH-30
PH-30RP41
PH-35
PH-200
PH-210
PH-300
PH-310
PH-400
PH-400-H
PH-410
PH-419
PH-760
PH-775SL11
PH-775SL21
PH-T-60-AL
PH-T-60-AOL-8
PH-T-60-AOS-L-8
PH-T-90-A
PH-T-100-A
PH-T-125-A
PH-T-126-A
PH-990ST71
CP-360
CP-380
CP-380-A
CP-400-5A
CP-400-CA
CP-400-GSE
CP-400-H
CP-740
DB-010EJ1
DB-020FK1
DB-030DQ1
DB-040DQ1
DB-060FQ1
DB-100FQ1
DB-045BW1
DB-610-30
DB-1228-1
DB-1235-1
DB-1235-3
DB-1238
DB-1245-1
DB-1249-2H
DB-1249-49
DB-1250-3
DB-1307-S-1
DB-1400
DB-1400AC-1
DB-1400AC-2
DB-1400AC-3
DB-1400AC-4
DB-1407-S
DB-1407-SE
DB-1422
6
MAIN FRAME NUMBER
XE-02137-HLH
AA-52550-4
AA-52550-4
AA-52550-1
XD-02384-2
XD-10570
XD-01155-1
XD-10572
XD-02275-1
XD-02275-1
XD-10573
XD-11231
AA-52550-2
AA-55220-3 74410
AA-55220-3 74410
XA-T-60-A
AA-52550-4
AA-52550-1
XE-T-91
XE-T-87
XE-T-87
XE-T-91
XD-10286
XD-361
XD-380
XD-380
XD-400-5-1
XD-400
XD-400
XD-400
XD-731
DB-010EJ1
MH-1800-D
XE-10373
XE-10373
XE-1385
XE-1385
Date Stamp Only
XW-1249-48
XE-1228
XE-1235
XW-1235
XE-1230
XE-1245
XE-1249-2H-10
XE-1249-48
Date Stamp Only
XE-1249
DB-1400
DB-1400AC
DB-1400AC
DB-1400AC
DB-1400AC
Date Stamp Only
Date Stamp Only
1422
DISTINGUISHING FEATURES
2˝ Fixed Ball Duplex Hitch
Has Push-Button Lock
Rigid Pintle Hook with 4-Bolt 1.75˝ x 2.38˝ Bolt Pattern
Swivel Pintle Hook with Mounting Flanges
7/8˝ 4-Bolt Mounting
7/8˝ 6-Bolt Mounting 1.88˝ x 6˝ Spacing
3/4˝ 2-Bolt Mounting Flanges 6.5˝ Apart
Swivel Pintle Hook with Housing
Swivel Pintle Hook with Housing
1/2˝ 4-Bolt Mounting 2.12˝ x 3.4˝ Bolt Pattern
Has Cotter Pin and Chain Latch Lock
Swivel Pintle Hook with Mounting Flanges
Swivel Pintle Hook with Mounting Flanges and Square Spring
Swivel Pintle Hook with Mounting Flanges and Round Spring
Swivel Pintle Hook - Undermount and Round Spring
Swivel Pintle Hook - Undermount and Square Spring
Swivel Pintle Hook with Housing and Large “Fish Mouth”
Rigid Coupler 6-Bolt Mounting
Rigid Coupler 4-Bolt 4.5˝ x 4.5˝
Rigid Coupler 4-Bolt 4.5˝ x 4.5˝ Bolt Pattern and Secondary Lock
Rigid Coupler 4-Bolt 1.5˝ x 3.25˝ Bolt Pattern
Rigid Coupler 4-Bolt 4.5˝ x 4.5˝ Bolt Pattern with Secondary Lock
Rigid Couper with Hood
2.5˝ I.D. Eye with 2˝ x 4˝ Mounting Mase
3˝ I.D. Eye
2.38˝ Eye with 4-Bolt Mounting for 1/2˝ Bolts
2.38˝ Eye with 4-Bolt Mounting for 5/8˝ Bolts
3˝ I.D. Eye with 4-Bolt Mounting for 3/4˝ Bolts
3˝ I.D. Eye with 4-Bolt Mounting for 7/8˝ Bolts
2.38˝ I.D. Eye Drawbar with Housing 3˝ x 4˝ x 6˝
3˝ I.D. Eye Drawbar with Housing 3˝ x 4˝ x 6˝
2.5˝ I.D. Eye with 6-Bolt Mounting 1.25˝ x 3˝ Shank
3˝ I.D. Eye with 6-Bolt Mounting 3.12˝ x 3.12˝ Shank
3.0˝ I.D. Eye with 6-Bolt Mounting 3.12˝ x 3.0˝ Shank
3˝ I.D. Eye with 6-Bolt Mounting 1.62˝ x 3˝ Shank
2.38˝ I.D. Eye with 6-Bolt Mounting 3.12˝ x 3.12˝ Shank
3˝ I.D. Eye with 2˝ O.D. x 4.25˝ Shank
3˝ I.D. Eye with 2˝ O.D. x 8.5˝ Shank
2.5˝ I.D. Eye Drawbar with 1.5˝ Diameter x 3.25˝ Shank
3˝ I.D. Eye Drawbar with Housing 5˝ O.D. x 8.25˝
2.38˝ I.D. Eye Weld-on Drawbar
2.38˝ I.D. Eye Weld-on Drawbar with Snubber on 12˝ Rod
2.38˝ I.D. Eye Weld-on Drawbar with Snubber on 10˝ rod
2.38˝ I.D. Eye Drawbar with Housing 5˝ O.D. x 8.25˝
2.38˝ I.D. Eye Drawbar with Housing 5˝ O.D. x 9.63˝
2.38˝ I.D. Eye Drawbar for “A-Frame” Mounting
PINTLE HOOKS
s Combination Ball / Hook
s Rigid Mount
s Swivel Mount
s NoLube™
s Air Cushioned
s FastLatch™
Pintle Hooks – Rigid Mount
BH-200RN41 Features 2˝ diameter ball
BH-50mmRN41 Features 50mm diameter ball
Mounting Dimensions
Application
6.39˝
5.39˝
A rigid mount pintle hook that combines a pintle hook and ball hitch.
Designed for customers who need the strength and capacity to pull
trailers equipped with drawbars, as well as the flexibility to pull trailers
with a 2˝ or 50mm ball hitch.
TM
One-hand operation and
automatic secondary lock
Patent #7,431,321
Our unique design is:
s3TRONGERANDMOREDURABLE
than removable ball designs.
s3HAPEELIMINATESPREMATURE
wear typically caused by the
drawbar pulling against the
ball.
s0ROVIDESBETTEROSCILLATION
and articulation in off-road
conditions than a removable
ball design.
Forged from
a special steel
alloy that
is heat treated
for strength,
and durability.
2.00˝
or
50mm
BALL
8.73˝
6.75˝
1.63˝
2.00˝
4.50˝
3.38˝
.53˝
Weight: 10 lbs. (4.5 kg)
Capacities
Pintle Hook:
Available with a
tethered lock pin
as BH-200RN51 or
BH-50mmRN51
1.75˝
High
e
capa st
comb city
in
in its ation
class
.
4,000 lbs. (1,810 kg) Maximum Vertical Load
20,000 lbs. (9,070 kg) Maximum Gross Trailer Weight
2˝ Ball / 50mm Ball:
1,000 lbs. (454 kg) Maximum Vertical Load
.46˝
Replacement Parts
For BH-200RN41/50mmRN41
use RK-10636
XB-T-89-4
XB-11048
Drawbar Eye Dimensions
2.38˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section.
Additional Information
s &ORSEVEREOFFROADAPPLICATIONSREDUCETHEABOVEMAXIMUM
CAPACITIESBYANDUSEWITHASWIVELMOUNTDRAWBAR
For BH-200RN51/50mmRN51
use RK-10636-1
XB-11157
s 4ESTEDINACCORDANCEWITH3!%*
s &ORADDITIONALSPECIFICATIONDETAILREFERTODOCUMENTNUMBERS
XL-PH377
XL-PH385
XL-PH379
XL-PH384
8
for
for
for
for
BH-200RN41
BH-200RN51
BH-50mmRN41
BH-50mmRN51
XB-T-89-4
XB-11048
PH-10RP41
Application
Mounting Dimensions
!RIGIDMOUNTPINTLEHOOKDESIGNEDFOROVERTHEROAD
and off-road towing.
Cast steel body is heat
treated for strength
and durability.
5.39˝
TM
Patent #7,431,321
5.81˝
3.75˝
The hook is designed
for maximum
articulation and
reduced wear.
1.63˝
4.50˝
3.38˝
1.69˝
Available with a
tethered lock pin
as PH-10RP51
.53˝
Weight: 7.5 lbs. (3.4 kg)
1.75˝
.25˝
Capacities
2,000 lbs. (910 kg) Maximum Vertical Load
Replacement Parts
2˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section.
For PH-10RP41 use RK-10632
XB-T-89-4
XB-11048
s &ORADDITIONALSPECIFICATIONDETAILREFERTODOCUMENTNUMBER
XL-PH350. For PH-10RP51, refer to XL-PH387.
For PH-10RP51
use RK-10632-1
XB-11157
XB-T-89-4
XB-11048
9
PH-T-60-AOL-8 (with chained cotter pin)
PH-T-60-S10646 (with tethered lock pin)
Mounting Dimensions
Application
!RIGIDMOUNTPINTLEHOOKDESIGNEDFOROVERTHEROADAND
off-road towing within stated capacities.
Forged from a special steel
alloy that is heat treated
for strength and durability.
The latch is forged steel
alloy and heat treated for
strength and long life.
1.88˝
7.42˝
6.38˝
4.50˝
3.38˝
1.69˝
Available with a
tethered lock pin
as PH-T-60-S10646
Weight: 11 lbs. (5 kg)
Capacities
1.75˝
.53˝ DIA.
Replacement Parts
For PH-T-60-AOL-8 use RK-62-O
XB-T-89-4
XB-11048
XA-199-1
XL-PH203, or XL-PH333 for PH-T-60-S10646.
For PH-T-60-S10646 use RK-S10646
XB-11048
XB-T-89-4
XB-11157
10
PH-30RP41
Application
Mounting Dimensions
!VERSATILERIGIDMOUNTPINTLEHOOKDESIGNEDFOROVERTHEROADAND
off-road towing.
5.39˝
TM
Patent #7,431,321
5.81˝
The hook is
designed for
maximum
articulation and
reduced wear.
5.69˝
1.94˝
alloy that is heat treated
for strength and durability.
Available
with a
tethered
lock pin as
PH-30RP51
4.50˝
3.38˝
1.69˝
.53˝
Weight: 8.4 lbs. (4.2 kg)
1.75˝
.25˝
Capacities
Replacement Parts
For PH30RP41 use RK-10632
XB-T-89-4
XB-11048
XL-PH351. For PH-30RP51, refer to XL-PH364.
For PH-30RP51 use RK-10632-1
XB-11157
XB-T-89-4
XB-11048
11
Pintle Hooks – Swivel Mount (with Spring Shock Absorption)
PH-30SA41
Application
Mounting Dimensions
!SPLITFLANGEMOUNTSWIVELSTYLEPINTLEHOOKDESIGNEDFOROVERTHEROADAND
OFFROADAPPLICATIONS4HESPRINGPROVIDESSHOCKABSORPTIONATTHECOUPLING
ideal for utility and construction applications.
6.75˝
.63˝
MAX.
TM
Patent #7,431,321
alloy that is heat treated for
strength and durability.
16˝
9.25˝
.53˝
4.50˝
2.25˝
A steel spring provides
shock absorption.
2˝
5.88˝
4.25˝
Cast ductile iron mounting
flanges for 5/8˝ plate.
Available with
a tethered
lock pin as
PH-30SA51.
2.50˝
1˝
4˝
Weight: 32 lbs. (14.5kg)
8˝
Capacities
Replacement Parts
For PH-30SA41 use RK-10632
XB-T-89-4
XB-11048
For PH-30SA51
use RK-10632-1
XB-11157
CAPACITIESBY.OTFORUSEWITHASWIVELMOUNTDRAWBAR
XB-T-89-4
XB-11048
XL-PH368. For PH-30SA51, refer to XL-PH369.
XA-10802-R
XB-T-60
XA-10802-F
XB-T-9N
XA-T-56
XB-T-52
XB-767
12
Pintle Hooks – Swivel Mount (with Spring Shock Absorption)
PH-30SB41
Application
Mounting Dimensions
!NUNDERMOUNTSWIVELSTYLEPINTLEHOOKDESIGNEDFOROVERTHEROAD
ANDOFFROADAPPLICATIONS4HESPRINGPROVIDESSHOCKABSORPTIONATTHE
COUPLINGIDEALFORUTILITYANDCONSTRUCTIONAPPLICATIONS
9.44˝
TM
Patent #7,431,321
The fully machined,
high-strength, cast ductile
iron housing with a zerk
fitting for easy lubrication.
.94˝
BRACE LUG
ATTACHMENT
16˝
12˝
10.38˝
7.88˝
5.19˝
Steel spring
provides shock
absorption.
Integrated mount
for cross-bracing.
2.5˝
.81˝
1.75˝
Available
with a
tethered
lock pin as
PH-30SB51
1.25˝
10.19˝
Capacities
Replacement Parts
RK-10632
XB-T-89-4
XB-T-69-C
For PH-30SB51
use RK-10632-1
XB-11157
XB-T-89-4
XB-11048
XL-PH365. For PH-30SB51, refer to XL-PH371.
XB-T-60
XB-T-9N
XA-T-56
XB-T-52
XA-10891
13
Pintle Hooks – Swivel Mount
PH-T-60-AOS-L-8
Mounting Dimensions
Application
!SPLITFLANGEMOUNTEDSWIVELSTYLEPINTLEHOOKDESIGNEDFOROVERTHEROAD
and off-road applications.
The body is forged from special alloy steel that is heat treated for
strength and durability. The special pintle shape is designed for maximum
articulation and reduced wear.
The rear flange
includes a grease
fitting for easy
lubrication.
4.67˝
2.95˝
Latch is forged steel alloy and heat
treated for strength and long life.
1.88˝
2.68˝
.69˝
MAX.
4.00˝
6.16˝
MIN. CLEAR
AREA
.88˝
4.50˝
Mounting flanges
allow for a maximum
.69˝ plate.
2.25˝
1.44˝
2.88˝
1.75˝
.53˝ HOLES
1.69˝
3.38˝
1.28˝ DIA. HOL E
Capacities
Replacement Parts
XB-T-20-2
XA-T-88
RK- T-61
s &ORADDITIONALSPECIFICATIONDETAILREFERTO
document number XL-PH208.
XB-767
XB-T-45-1
XB-773
XB-758
(Qty. 4)
XB-T-89
(Qty. 4)
(Qty. 4)
RK-62-O
XB-T-89-4
XB-11048
14
XA-199-1
PH-760
Application
Mounting Dimensions
(EAVYDUTYCONSTRUCTIONFORONANDOFFROADAPPLICATIONSWHEREA
SIGNIFICANTAMOUNTOFARTICULATIONISREQUIREDINASWIVELSTYLESPLIT
flange mount pintle hook.
To ensure long life, the front
and rear flanges and pivot
bolt include zerk fittings for
for easy lubrication.
1.50˝
Mounting flanges allow for
a maximum 3/4˝ plate.
7.6˝
1.81˝
The forged steel
alloy body and
the cast steel latch
are heat treated
for strength and
durability.
4.19˝
8.75˝
.75˝ 13.7˝
8.50˝
4.25˝
MIN. CLEAR
AREA
2.00˝
4.00˝
.78˝ DIA.
(2 HOLES REQ.)
1.88˝ DIA. HOL E
3.25˝
The hook is
designed for
maximum
articulation.
3.25˝
Capacities
6.50˝
3.50˝
4.12˝
.75
BOLTS
(2 REQ.)
8.50˝
Replacement Parts
3˝ I.D. with 1.25˝ to 1.63˝ diameter section.
RK-02772
XB-T-60
XB-767
(Qty. 2)
s &ORADDITIONALSPECIFICATIONDETAILREFERTODOCUMENT
number XL-PH215.
XA-763
XB-HNH-34-F
(Qty. 2)
XB-772
(Qty. 2)
XA-763A
RK-05961
XB-127
XB-773
XB-771-1
XB-10089
XB-T-60
XB-10089
XB-128
XA-768
XA-199-6
(SUB-ASSY.)
XA-08636
(SUB-ASSY.)
15
PH-775-01552 (Lubricated)
Application
Mounting Dimensions
significant amount of articulation is required.
5.12˝
Cast steel alloy latch is
heat treated for strength
and durability.
Grease fitting for
easy lubrication.
1.75˝
4.38˝
6.56˝
8.44˝
6.25˝
4.50˝
2.25˝
A one piece housing
keeps contaminants
from entering the
pintle hook assembly.
2.25˝
6.25˝
4.50˝
Body and housing are forged from
special steel alloy and heat treated for
high strength, and wear resistance.
.94˝ DIA.
(4 HOLES)
3.25˝
6.50˝
MIN. CLEAR AREA
3.25˝
2.25˝
4.50˝
6.50˝
Capacities
.28 X 45°
CHAMFER
4.00˝ DIA. HOLE
2.25˝
4.50˝
.94˝ DIA.
(4 HOLES)
Replacement Parts
XB-120-2
3˝ I.D. with 1.63˝ diameter section.
number XL-PH246.
The Holland PH-775-01552 complies with NOM-035-SCT-2-2010
Safety Specifications and Test Methods.
RK-775
LATCH KIT
XB-E-552-1
XA-766-2Z
XB-767-10
XB-757
XB-127
XA-749-1
XB-767
XB-781-1
XA-782
XB-780-1
Interchangeable with
New PH-995SH71,
see page 33.
16
PH-775-D ASSEMBLY
XA-199-4
PH-775SL11 (NoLube®)
Application
Mounting Dimensions
significant amount of articulation is required.
4.00 MAX
A one-piece sealed housing keeps
contaminants from entering the
pintle hook assembly.
5.27˝SQ.
TM
Patent #7,431,321
1.75
4.43˝
Cast steel alloy latch is
heat treated for strength
and durability.
6.74˝
8.26˝
6.62˝
4.50˝
2.25˝
SQ.
2.25˝
SQ.
4.50˝
Body and housing are forged
from special steel alloy and
heat treated for high strength
and wear resistance.
®
Available with
a tethered
lock pin as
PH-775SL21.
No lubrication required.
6.62˝
0.91˝
4 HOLES
MIN. CLEARANCE
6.75˝ SQ.
3.38˝
SQ.
.94˝
DIA.
4.03˝ THRU
WITH .28˝x 45˚
CHAMFER GAP
2.25˝ SQ.
CL
Capacities
HOUSING
PROFILE
REF
4.50˝ TYP. SQ.
CL
Replacement Parts
3˝ I.D. with a 1.63˝ diameter section.
For PH-775SL21 use
RK-10545-1 LATCH KIT
RK-10545 LATCH KIT
XB-10537
XB-S10647
XB-03104
XB-03104
XB-10537
number XL-PH334. For PH-775SL21, refer to XL-PH339.
The Holland PH-775SL NoLube complies with NOM-0350-SCT-2-2010
RK-11510
Seal Kit
XA-10546
Housing Subassembly
XB-781-1*
PH-775SN11
Hook Subassembly
XA-780-1*
XA-782*
PH-775SN21
Hook Subassembly
* Included in
Hook
Subassemblies
17
Pintle Hooks – Rigid Mount – Air Cushioned
PH-300 and PH-300-R
Application
Mounting Dimensions
A rigid mount pintle hook designed for enhanced wear resistance. Used
for on- and off-road applications.
Unique one-handed latch operation.
Also available with reversed latch
handle, PH-300-R (see inset).
5.76˝
.38˝ MIN .
2.00˝ MAX.
Plunger/snubber force is
developed by the vehicle’s air
system to reduce wear and to
provide shock absorption.
7.25˝
10.5˝
6.00˝
Adjustable
plunger
.94˝
3.8˝
3/8˝ to 1/4”
NPT Reducer
3/8˝NPT Plug
7.5˝
Austenitic Manganese
steel alloy body
for enhanced wear
resistance.
3.25˝
DIA. MIN .
3.75˝
*
PH-300-R
(reverse latch)
.12˝
1.88˝
6.00˝
3.75˝
2.5˝
3.00˝
6.00˝
The complete assembly includes a pintle hook, plunger, air chamber, and
mounting bracket. For pintle hooks without an air chamber, bracket, or
plunger, order PH-300-1 or PH-300-R-1.
.81˝ DIA. TYP.
(6 REQ.)
* Center hole not required if
used without air chamber.
The PH-300 can be operated with or without the air chamber. For easier
COUPLINGDRAWBARGUIDESAREAVAILABLESEEPAGE
Capacities
Replacement Parts
PH-300-R use RK-03179
PH-300 use RK-02536
XB-03104
XB-03104
XB-03103
XB-165945
XB-T-199
Included with
XB-165945
s 4ESTEDINACCORDANCEWITH3!%*4YPE))
XA-04156
number XL-PH243. For PH-300-R, refer to XL-PH248.
Included with
XB-165945
XE-01544-1
XB-T-199
XA-02608 Cylinder and Bracket Sub-Assembly
18
PH-210
Application
Mounting Dimensions
A rigid mount pintle hook designed for trailers and semitrailers in doubles
ANDTRIPLESOPERATIONS5SEDFOROFFANDOVERTHEROADAPPLICATIONS!IR
cushioned snubber is designed to minimize the gap between the pintle
HOOKANDTHEDRAWBARONVEHICLESWITHAIRSYSTEMS
Plunger/snubber force is developed by
the vehicle’s air system to reduce wear
and to provide shock absorption.
5.97˝
7.06˝
3/8˝ MIN
2˝ MAX
TM
Patent #7,431,321
10.71˝
5.64˝
.95˝
3.93˝
Air chambers
are available
for different
mounting
widths; see
page 26.
3/8˝ NPT PLUG
3/8˝ TO 1/4˝ NPT REDUCER
Available with a
tethered lock pin.
Adjustable plunger
3.25˝
DIA.
MIN.
(Replace “11” with “21”
in model number)
Cast steel alloy body is
heat treated for increased
strength and durability.
PH-210RA11n#OMPLETEASSEMBLYINCLUDESAPINTLEHOOKPLUNGER
air chamber, and mounting bracket.
PH-210RN11n0INTLEHOOKWITHOUTANAIRCHAMBERBRACKETORPLUNGER
PH-210RM11n0INTLEHOOKWITHPLUNGERONLY
For additional model numbers, see page 26.
The PH-210 can be operated with or without the air chamber.
&OREASIERCOUPLINGDRAWBARGUIDESAREAVAILABLESEEPAGE
8.5˝
5.25˝
2.62˝
*
5.64˝
3.00˝
1.88˝
3.14˝
6.50˝
3.25˝
4.25˝
.81˝ DIA.
TYP.
(4 REQ.)
Capacities
18,000 lbs. Maximum Vertical Load
90,000 lbs. Maximum Gross Trailer Weight
Replacement Parts
For PH-210RN21 use
XB-S10647
XB-03104
RK-10545 LATCH KIT
XB-10537
XB-03104
XB-10537
XB-165945
number XL-PH340.
XB-T-199
s !LSOAVAILABLEn0(3ERIESWITHTETHEREDLOCKPIN
Replace “11” with “21” in model number.
The Holland PH-210 complies with NOM-0350-SCT-2-2010
Included with
XB-165945
XA-04156
Included with
XB-165945
XE-01544-1
XB-T-199
19
PH-310
Application
Mounting Dimensions
cushioned snubber is designed to minimize the space between the pintle
7.06˝
5.97˝
3/8˝ MIN
2˝ MAX
TM
Patent #7,431,321
6.11˝
10.71˝
.95˝
3.93˝
3/8˝ NPT PLUG
3/8˝ TO 1/4˝ NPT REDUCER
Air chambers
are available
for different
mounting
widths; see
page 26.
7.75˝
Available with a
tethered lock pin.
*
3.75˝
3.25˝ MIN.
in model number)
Adjustable plunger
.12˝
1.88˝
strength,durability, and
wear resistance.
PH-310RA11n#OMPLETEASSEMBLYINCLUDESAPINTLEHOOK
plunger, air chamber, and mounting bracket.
6.11˝
3.75˝
3.13˝
3.00˝
6.00˝
.81 TYP
(6 REQ.)
Capacities
Replacement Parts
For PH-310RN21 use
XB-S10647
XB-03104
RK-10545 LATCH KIT
XB-10537
XB-03104
XB-10537
XB-165945
XB-T-199
number XL-PH341.
Included with
XB-165945
XA-04156
s !LSOAVAILABLEn0(3ERIESWITHTETHEREDLOCKPIN
Replace “11” with “21” in model number.
Included with
XB-165945
XE-01544-1
20
XB-T-199
PH-400 and PH-400-H
Application
Mounting Dimensions
PH-400 and PH-400-H
Automatic secondary lock
for improved safety.
5.76˝
.75˝ MIN .
2.25˝ MAX.
7.00˝
Unique one-handed
latch operation.
10.43˝
11.75˝
Plunger/snubber
force is developed
by the vehicle’s
air system to
reduce wear and
to provide shock
absorption.
.94˝
5.00˝
Cast alloy
steel body is
heat treated
for increased
strength,
durability,
and wear
resistance.
Air chambers
are available
for different
mounting widths;
see page 26.
3.8˝ to 1/4”
NPT Reduce r
3.8˝NPT Plug
PH-400
Adjustable plunger
7.6˝
The complete assembly includes a pintle hook, plunger, air chamber, and mounting
bracket. For pintle hooks without an air chamber, bracket, or plunger, order PH-400-1
or PH-400-1-H.
The PH-400 and PH-400-H can be operated with or without the air chamber. For
EASIERCOUPLINGDRAWBARGUIDESAREAVAILABLESEEPAGE
6.62˝
PH-400-H
3.25˝ DIA. MIN
2.38˝
*
10.43˝
6.38˝
3.8˝
2.50˝
10.43˝
1.81˝
2.19˝
2.00˝
1.06˝
2.12˝
5.00˝
5.00˝
2.50˝
5.00˝
7.6˝
5.00˝
3.25˝ *
DIA. MIN.
3.8˝
2.38˝
3.00˝
.81˝ DIA. TYP.
(8 REQ.)
6.00˝
.81˝ DIA. TYP.
(8 REQ.)
Capacities
Replacement Parts
RK-02536
XB-03103
XB-03104
XB-165945
number XL-PH244 or PH-247.
XB-T-199
Included with
XB-165945
XA-04156
The Holland PH-400 and PH-400-H complies with NOM-0350-SCT-2-2010
Included with
XB-165945
XE-01544-1
XB-T-199
21
PH-410
Application
Mounting Dimensions
7.06˝
5.97˝
3/8˝ MIN
2˝ MAX
TM
7.70˝
Patent #7,431,321
11.79˝
.94˝
4.94˝
3/8˝ NPT PLUG
3/8˝ TO 1/4˝
NPT REDUCER
Air chambers
are available
for different
mounting widths;
see page 26.
Adjustable plunger
7.63˝
5.00˝
2.50˝
Available with a
tethered lock pin.
*
in model number)
3.25˝ MIN.
strength,durability, and
wear resistance.
2.38˝
2.00˝
5.00˝
2.13˝
.81˝ THRU
(6 REQ.)
3.81˝
Capacities
Replacement Parts
RK-10545 LATCH KIT
For PH-410RN21 use
XB-10537
XB-S10647
XB-03104
XB-03104
XB-10537
XB-165945
XB-T-199
Included with
XB-165945
XL-PH342.
XA-04156
s !LSOAVAILABLEn0(3ERIESWITHTETHEREDLOCKPIN2EPLACE
“11” with “21” in model number.
XE-01544-1
XB-T-199
Included with
XB-165945
22
PH-550
Application
Mounting Dimensions
Secondary lock pin.
5.8˝
.50˝ MIN.
2.25˝ MAX.
6.7˝
10.7˝
9.9˝
.38˝
Body is cast
steel alloy
for maximum
durability.
3/8˝ to 1/4”
NPT Reducer
3/8˝ NPT Plug
1.63˝ DIA.
5.0˝
Adjustable
plunger.
1.5˝ MIN. DIA.
3.12˝ MAX. DIA.
.812˝ DIA.
6 HOLES
9.88˝
The complete assembly includes a pintle hook, bullet, mounting bracket,
and air chamber. For pintle hook and plunger only, order PH-550-1.
The PH-550 must be operated with an air chamber. For easier coupling,
DRAWBARGUIDESAREAVAILable; see page 56.
2.38˝
2.00˝
2.12˝
3.56˝
1.12˝
2.50˝
7.25˝
Capacities
Replacement Parts
XB-05497
XB-05493
XB-05825
XA-05492
XA-05490
XA-05491
XB-05499
SUB-ASSY.
XB-06134
XB-05825
XB-196-3
XB-03104
XA-05494
XB-03103
number XL-PH261.
CL
BULLET
NOSE
XB-05496
XB-03104
XB-05498
XB-165945
XB-T-199
Included with
XB-165945
The Holland PH-550 complies with NOM-0350-SCT-2-2010 Safety
Specifications and Test Methods.
XA-05754
XB-T-199
Included with
XB-165945
XE-01544-1
23
PH-419
NEW
Application
Mounting Dimensions
A rigid mount pintle hook designed for trailers
ers and semitrailers
semitrail
used in
DOUBLESANDTRIPLESOPERATIONS5SEDFOROFFANDOVERTHEROADAPPLICATIONS
Air cushioned snubber is designed to minimize the gap between the pintle
6.02"
(152.9mm)
7.40"
(188.1mm)
X=
3/8"MIN
2"MAX
(9.5mm MIN
50.8mm MAX)
0.5 in.[12.7mm]-12.0 in.[304.8mm]
SEE MOUNTING STRUCTURE CHART
FOR CORRESPONDING
PART NUMBERS
(Page 6)
12.17"
(309.1mm)
TM
Patent #7,431,321
.94"
(23.8mm)
5.13"
(130.2mm)
3/8" NPT PLUG
3/8" TO 1/4" NPT REDUCER
Air chambers
are available
for different
mounting widths;
see page 26.
6.62"
(168.2mm)
5.00"
(127.0mm)
2.50"
(63.5mm)
Available with a
tethered lock pin.
in model number)
Ø 3.25"
(82.6mm)
Adjustable plunger
Austenitic Manganese
steel alloy body
for enhanced wear
resistance.
2.38"
2.00"
(50.8mm)(60.3mm)
7.88"
(200.0mm)
5.19"
(131.8mm)
Ø .81"THRU
(20.6mm)
(6 REQ.)
2.13"
(54.0mm)
3.31"
(84.1mm)
Capacities
Replacement Parts
RK-10545 LATCH KIT
(See FastLatch Note Below)
XB-10537
XB-S10647
XB-03104
3˝ I.D. with 1.25˝ to 1.63˝ diameter section.
XB-03104
XB-10537
XA-02608 - CYLINDER AND BRACKET SUB-ASSEMBLY
XB-T-199
XL-PH10409.
s !LSOAVAILABLEn0(3ERIESWITHTETHEREDLOCKPIN2EPLACE
“11” with “21” in model number.
Included with
XB-165945
XA-04156
XE-01544-1
XB-T-199
Included with
XB-165945
24
NEW PH-419 – BEST COMBINATION OF
WEAR RESISTANCE, STRENGTH AND SAFETY
Enhanced
Wear Resistance
NEW
PH-419 PINTLE HOOK
s !USTENITICMANGANESESTEEL
alloy body
s 4HEHOOK@WORKHARDENSAT
contact surfaces with the
drawbar eye
Strength by Design
s "ODYDESIGNEDTOOPTIMIZE
strength based on the nonlinear material properties of
the austenitic manganese
steel alloy
s #OMPAREDTOAPH-410, which
features our higher-strength
carbon steel alloy, the PH-419
body is visibly more robust
having been optimized via
CAD / FEA for the austenitic
manganese material
properties
The PH-419 can be used
with or without air chamber
and is compatible with
drawbar eye dimensions of
3” (76mm) I.D. with a 1.63”
(41.5mm) cross section.
CAPACITIES
20,000 Lbs. (9.070 Kg)
Maximum Vertical Load
Safety by HOLLAND
s /URHIGHSTANDARDSOF
safety are the result of over
a century of experience
in the design, testing,
manufacturing, and quality
control of coupling products
100,000 Lbs. (45,860 Kg)
Maximum Gross Trailer Weight
APPLICATIONS (EAVYDUTY@!TRAINCONVERTERDOLLYAPPLICATIONS
for bulk liquids, dry bulk, aggregates and quarry materials.
Patent Pending
25
Air Chamber Assemblies and Mounting Kits
X
SELECT “X”
DIMENSION
FOR
MOUNTING
AIR
CHAMBER
ROD
LENGTH
AIR
CHAMBER/
PLUNGER
ASSEMBLY
P/N WHEN
ORDERED
SEPARATELY
PINTLE HOOK PART NUMBERS *****
PINTLE HOOK ONLY
PH-210RN11 PH-300-1 PH-300-R-1 PH-310RN11 PH-400-1 PH-400-1-H PH-410RN11 PH-410RN11
PINTLE HOOK WITH
PLUNGER ONLY
PH-210RM11
PINTLE HOOK
WITH COMPLETE
AIR CHAMBER
ASSEMBLY
.75˝ - 2.0˝
1.8˝
XA-02608*
2.0˝ - 12.0˝
12.0˝
XA-10198*** PH-210RF11
.75˝ - 2.25˝
1.8˝
XA-02608*
.50˝ - 2.25˝
PH-210RA11
PH-300
PH-300-R
PH-310RM11
PH-410RM11 PH-419RM11 PH-550-1
PH-310RA11
PH-410RA11 PH-419RA11
PH-310RF11
PH-410RF11
PH-400
PH-419RF11
PH-400-H
XA-09862**
PH-550**
WHAT’S INCLUDED:
*
**
***
*****
Includes plunger, mounting bracket, and air chamber.
For PH-550, includes bullet, mounting bracket, and air chamber (plunger is factory installed to the pintle hook).
Includes plunger and air chamber with cut-to-length rod.
To add the Tethered Lock Inset Pin Option for FastLatch models PH-210, PH-310, PH-410 and PH-419, replace
the ‘11’ with ‘21’ in the part number.
XA-02608
XA-09862
XB-165945
XB-T-199
Included with
XB-165945
XB-165945
XB-T-199
Included with
XB-165945
XA-04156
XA-05754
Included with
XB-165945
XE-01544-1
XB-T-199
XE-01544-1
Included with
XB-165945
XB-T-199
XA-10198
XB-166321
Cut-to-length
air chamber rod
XA-04156
26
COUPLERS
TITLE HERE
s FastLatch
s Rigid
Mount Ball / Hook
Combination
s Swivel
Mount
Rigid Mount
s Pin
& Clevis
Swivel
Mount
s Ball
Hitch
NoLube
s Air Cushioned
Coupler – Rigid Mount (Over-the-Road)
CP-400-H
Application
Mounting Dimensions
!VERSATILERIGIDMOUNTCOUPLERUSEDFORTRAILERSANDEQUIPMENTINOVER
the-road and off-road applications. Especially useful when frequent and
automatic coupling is desired, and when the weight of the drawbar makes
it impractical to lift. The latch automatically closes and locks upon coupling.
Body is cast steel alloy
and heat treated for
strength.
Minimal lubrication
and maintenance is
required.
2˝
8.12˝
Jaw is forged
steel alloy and
heat treated.
Secondary
lock for
added safety.
.78˝ DIA. (4 HOLES)
8.50˝
6.00˝
4.50˝
2.25˝
4.50˝
6.00˝
Capacities
Replacement Parts
XA-401-X3
SUB ASSY.
XB-403
XB-708
Springs
attach
here
XL-PH233.
XB-10109
XB-382
XA-402-X1
XA-404-X
XB-04473
28
Coupler – Rigid Mount (Over-the-Road)
CP-360
Application
Mounting Dimensions
!RIGIDMOUNTCOUPLERUSEDFORTRAILERSANDEQUIPMENTINOVERTHEROAD
and off-road applications. Especially useful when frequent and automatic
coupling is desired, and when the weight of the drawbar makes it
impractical to lift. The latch automatically closes and locks upon coupling.
2.24˝
Body is cast steel alloy and
heat treated for strength.
Jaw is cast steel
alloy and heat
treated.
To ensure long
life, grease
fittings are
provided for
easy lubrication.
10.13 ˝
1.50˝
Secondary lock for
added safety.
10.00˝
8.50˝
5.50˝
2.75˝
2.38˝
Bottom handle pull is
primary lock release.
6.44˝
8.75˝
4.75˝
.84˝
.78˝ DIA.
6 HOLES
Capacities
Replacement Parts
XL-PH231.
XB-T-33-A
XB-T-377
XA-01154
XB-T-377
XB-767
XA-394
XA-393
XB-5
XB-T-20-2
XB-3094
XA-07760
XA-T-88
XA-392
XA-T-88
XA-06101
XB-767
29
Coupler –Rigid and Swivel Mount (Over-the-Road)
CP-740 and CP-730
Application
Mounting Dimensions (CP-740)
!VERYSTRONGSPECIALIZEDCOUPLERUSEDFORTRAILERSANDEQUIPMENTIN
OVERTHEROADANDOFFROADAPPLICATIONS%SPECIALLYUSEFULWHENFREQUENT
and automatic coupling is desired. The latch automatically closed and
locks upon coupling.
CP-740 Rigid Mount
Primary lock release
mechanism.
12.75˝
Hooded guide directs
the drawbar into the
jaw for easy coupling.
1.81˝
Secondary lock
release mechanism
automatically locks
for added safety.
To ensure long life,
grease fittings (3)
are provided for
easy lubrication.
8.44˝
9.69˝
13.0˝
10.88˝
9.38˝
Jaw is forged steel
alloy and heat treated.
3.25˝
4.69˝
6.50˝
Body is cast steel alloy
and heat treated.
5.25˝
2.63˝
Capacities
.78˝ DIA.
THRU (6 REQ.)
number XL-PH268.
Replacement Parts
XB-767
XB-21-S-187-1250
XB-21-S-312-1250
XB-T-20-2
XA-732
XA-11042
CP-730 Swivel Mount
The CP-730 is an on- and off-road
coupler featuring the CP-740
coupler with a lubricated,
SWIVELMOUNTHOUSINGAND
spring-loaded lock pin.
When the spring-loaded
lock pin is engaged, the
coupler remains rigid
when coupling, or when
towing a trailer equipped
WITHASWIVELSTYLEDRAWBAR
Simply disengage the lock pin to return
THECOUPLERTOSWIVELMODE
XB-403
XB-06150
XB-21-S-500-1000
XA-01740
XA-736
XA-05739
XB-03731
XA-05738
XA-T-88
XB-T-60
XA-06101
XB-767
XA-05740
Please contact SAF-HOLLAND for more information.
30
Pin and Clevis Coupler – Swivel Mount (Over-the-Road)
PH-990ST71 (Rubber Cushioned)
Application
Mounting Dimensions
!SPECIALFRAMEMOUNTSWIVELSTYLEPINCOUPLERWITHAhFISHMOUTHvHEAD
and rubber cushions for shock absorption. Designed for extreme-duty trailers
ANDSEMITRAILERSINDOUBLESANDTRIPLESOPERATIONS5SEDFOROVERTHEROADAND
off-road applications.
Easy to maintain and
requires no lubrication.
23.28˝
8.00˝
4.00˝
2.28˝
5.53˝
10.28˝
9.88˝
4.94˝
8.00˝
4.00˝
@&ISHMOUTH
clevis head
helps guide the
drawbar into
position for
easier coupling
Internal rubber
cushions provide
shock absorption.
9 HOLES
FOR .75˝
DIA.
BOLTS
1.50˝
4.43˝
2.00˝
Wear plates
in fish mouth
provide a
replaceable
wear surface
and minimize
DRAWBAR@SLOP
18.23˝
13.80˝
For added security, a safety pin
serves as a secondary lock.
11.61˝
The clevis pin is forged steel alloy
that is heat treated for strength,
durability, and wear resistance.
11.67˝
7.38˝
2.75˝
DIA.
Capacities
Replacement Parts
number XL-PH219.
XB-T-993
Parts required for PH-990ST71
May also be used with PH-T-990
XB-T-307 (6 REQ.)
XB-T-993
XB-T-993
XB-10738
(4 REQ.)
RK-T-551
XB-T-992
XA-10287
XB-T-61
(4 REQ.)
XA-10008
(2 REQ.)
XA-T-361 XB-T-362
XA-10286
XB-770-1
XA-T-317-8
XA-T-361
XB-TLN-1000-7
XB-780-1
XB-T-993-1
XB-0437
XB-T-306 (6 REQ.)
RK-10291
XA-10008
(2 Req.)
XA-10287
XB-T-61
XB-10738 (4 Req.)
(4 Req.)
XB-T-993
31
Pin and Clevis Coupler – Swivel Mount (Over-the-Road)
PH-995SH71 (Non-Cushioned)
NEW
Application
Mounting Dimensions
!NONCUSHIONEDSWIVELMOUNTPINANDCLEVISCOUPLERDESIGNEDFOR
D I
DF
OVERTHEROADANDOFFROADAPPLICATIONSOFDRAWBARSTYLETRAILERS
19.16"
(486.7 mm)
12.53"
(318.3 mm)
Grease fitting for
easy lubrication.
@&ISHMOUTH
clevis head
helps guide the
drawbar into
position for
easier coupling
A one-piece housing helps
keep contaminants out.
Wear plates
in fish mouth
provide a
replaceable
wear surface
and minimize
DRAWBAR@SLOP
10.62"
(269.6mm)
6.25"
(158.8 mm)
Ø 2.75"
(69.8 mm)
8.25"
(209.6 mm)
6.50"
(165.1 mm)
6.63"
(168.4 mm)
4.77"
(121.3 mm)
6.25"
(158.8 mm)
For added security, a safety pin
serves as a secondary lock.
4.14"
(105.3 mm)
Large 2.75˝ (70 mm) diameter
CLEVISPINREDUCES@SLOPBETWEEN
the pin and drawbar eye.
15.34"
(389.6 mm)
10.56"
(268.3 mm)
Replacement Parts
XB-T-993
Capacities
XB-T-992
XA-10287
XB-T-61
(4 REQ.)
XA-10008
(2 REQ.)
XB-T-993
XB-T-993
XB-10738
(4 REQ.)
XB-TLN-1000-7
XB-T-993-1
XB-0437
XL-PH10412UM.
XB-767
XA-782
XB-781-1
XA-749-1
XB-780-1
RK-10291
Interchangeable with
PH-775-01552,
see page 33.
32
XA-10008
(2 Req.)
XA-10287
XB-T-61
XB-10738 (4 Req.)
(4 Req.)
XB-T-993
Interchangable Assemblies
New Installations
Complete Pintle Hook Assembly
Complete Pin & Clevis Assembly
PH-775-01552
PH-995SH71
Features XA-749-1 Lubricated Housing
Features XA-749-1 Lubricated Housing
100,000 lb. (45,360 kg) Max. GTW
20,000 lb. (9,070 kg) Max. Vertical
100,000 lb. (45,360 kg) Max. GTW
3,000 lb. (1,360 kg) Max. Vertical
See page 16
See page 32
Retrofit/Interchange Installations
XA-749-1
Lubricated
Swivel Housing
Hook & Latch Sub-Assemblies
Pin & Clevis Sub-Assembly
PH-775-D
PH-995SN71
Compatible with XA-749-1
,UBRICATED3WIVEL(OUSING
only
,UBRICATED3WIVEL(OUSING
only
Standard Latch with
Chained Cotter Pin
PH-775SN11
with FastLatch™
Lubricated and XA-10546
.O,UBE©3WIVEL(OUSINGS
PH-775SN21
with FastLatch™
and Tethered
Lock Pin
Lubricated and XA-10546
.O,UBE©3WIVEL(OUSINGS
33
Ball Hitch – Rigid Mount (Over-the-Road)
BH-50 (Includes Ball and Receiver Assemblies)
Mounting Dimensions
Application
4HISBALLHITCHISIDEALFORHEAVYDUTYOVERTHEROADAPPLICATIONS
where high articulation (up to 30°) in all directions is required, and in
APPLICATIONSWHERETHEVEHICLEANDTRAILERREMAINCOUPLED4HEBH-50
minimizes reduces chucking.
6.75˝
5.0˝
DIA.
1.0˝
13.5˝
1.75˝
17.0˝
10.0˝
3.25˝
4.12˝
6.5˝
8.5˝
Top-mounted adjustment
ratchet provides easier
coupling, uncoupling, and
slack adjustment.
The release includes
a compression spring
to aid in uncoupling.
Steel bolt-on
frame for ease
of installation
and strength.
Weld the body to
the trailer frame
or tongue.
1.06˝ DIA .
4 MOUNTING HOLES
1.75˝
6.0˝
The tethered
safety pin acts as
a secondary lock.
3.0˝
.5˝
.5˝
NOTE:
The 5˝ diameter steel alloy ball
is precision machined, and heat
treated for superior strength,
durability and wear resistance.
7/16˝ min .
3.25˝
.5˝
19.75˝
TONGUE
A minimum of 35 linear
STRUCTURE
inches of weld of the size
noted is required to develop
sufficient hitch strength.
2.5˝
5.8˝
Capacities
7/16˝ min.
WELD ACROS S
THE BOTTO M
7/16˝ min .
BOTH SIDES
Replacement Parts
RECEIVER ONLY
XA-04430
XA-02235
XB-02724
XB-PWM-38-78
XA-05264
XB-21-S-250-1250
number XL-PH254.
XB-C-375-C-150
XB-PWM-38-78
XA-02240
XB-05514
XA-02234
XB-02745
D
XB-H-38
XB-639
XB-3547
XA-02721
SUB-ASSY.
XA-02241
BALL ONLY
XA-04108
XA-05263
XA-04337
RK-06683
XB-02724
XB-21-S-250-1250
XA-05264
XB-PWM-38-78
XA-05263
XB-05514
XA-04337
34
COUPLINGS
INDUSTRIAL / GSE
s Couplers
s E-Hitch
s Lunettes
Coupler – Rigid Mount (Industrial / GSE)
CP-400-GSE and CP-400-CA
Application
Mounting Dimensions
Strong rigid mount couplers that are designed for industrial material
handling and ground support applications. The CP-400-GSE and CP-400-CA
are useful where coupling is frequent, and quick and easy coupling release
is desired. The latch automatically closes and locks upon coupling.
The CP400-CA features an integral roller which accommodates a cable
RELEASESYSTEMTOOPENTHECOUPLERFROMTHEDRIVERSPOSITION
Lubrication and
maintenance are minimal.
2˝
CP-400-CA
Cable
Release
Primary lock only;
no secondary
lock.
8.12˝
Body is cast
steel alloy.
.78˝ DIA. (4 HOLES)
Jaw is forged
alloy steel and
heat treated
for strength,
toughness, and
durability.
8.50˝
6.00˝
4.50˝
4.50˝
6.00˝
Capacities
30,000 lbs. (13,610 kg) Maximum Drawbar Pull
Replacement Parts
IMPORTANT:
There is no secondary lock mechanism.
This coupler is not designed for overthe-road applications.
XA-401-X1
SUB ASSY.
XB-403
XA-211
XB-708
Springs
attach here
s &ORMOREPRODUCTSPECIFICMOUNTINGINFORMATIONAND
operating instructions, refer to SAF-HOLLAND document
number XL-PH348 or XL-PH232.
XB-06181
XB-382
XB-10109
XA-402-X1
XA-404-X
XB-04473
36
XA-T-150-AF Bolt-On and CP-T-150-S02986 Weld-On
Application
Mounting Dimensions
!UTOMATICRIGIDMOUNTCOUPLERDESIGNEDFORAVARIETYOFINDUSTRIAL
material handling applications. Useful in instances where coupling is
frequent and quick coupling is desired. The latch automatically closes
and locks upon coupling.
5˝
!VAILABLEWITHOUTPREDRILLEDMOUNTINGHOLES
Order CP-T-150-S02986.
10.94˝
Body is cast
steel alloy.
3.13˝
1.5˝
3.38˝
1.25˝
.62˝ R.
7.19˝
6.66˝
3.5˝
5.0˝
1.75˝
Bottom pull lock
release mechanism.
Jaw remains open upon lock release
and automatically closes and locks
when drawbar is inserted.
1.5˝
3.38˝
.75˝
.53˝ DIA.
4 HOLES
Capacities for both Coupler and Coupler Ring
50 lbs. (23 kg) Maximum Vertical Load
15,000 lbs. (6,800 kg) Maximum Drawbar Pull
XA-T-150-AF
.38˝ *See Note Below
CP-T-150-S02986
NOTE: Maximum of 16.76 linear inches of .38˝
fillet weld required to develop rated capacity.
Replacement Parts
IMPORTANT:
There is no secondary lock mechanism.
This coupler is not designed for over-theroad applications.
Maximum 1˝ diameter cross-section.
RK-T-150-S02986 Jaw Replacement Kit
XA-T-2
XB-04847
operating instructions, refer to SAF-HOLLAND document
number XL-PH235.
XB-646
(2 Req.)
37
EH-3050
s 30,000 lb. (13,610 kg) or 50,000 lb.
(22,680 kg) Maximum Drawbar Pull,
depending on mounting fasteners
NEW
s 500 lb. (227 kg) Maximum Vertical Load
s NATO 3˝ (76mm) Drawbar Eye Compatible
2.375˝ (60mm) to 3.0˝ (76mm) with maximum 1.75˝ (44mm)
diameter section.
PATENT PENDING DESIGN
s (IGHSTRENGTHCASTSTEELFRAMEPINANDHANDLE
s 5PPER0IN'UARDANDANINTERNALLYMOUNTEDSPRING
helps protect the e-Hitch from impacts.
s 4HEMMDIAMETERSTEELPINMINIMIZESTOWBAR
@SLOP0INWEARISDECREASEDDUETOITSLARGERSURFACE
area and heat-treating to increase hardness.
s 4HROATAREAFEATURESANEGATIVESLOPETOMINIMIZE
TOWBAR@CHUCKINGBOUNCING
s #ORROSIONRESISTANTCOATINGSONALLCOMPONENTS!CHOICE
of yellow or white powder coat frame is available.
– EH-3050-13 Safety Yellow
– EH-3050-14 White
s (ANDLEISINTERCHANGEABLEBETWEENRIGIDANDFOLDDOWN
settings. Simply remove the handle, turn 180º, and
reinstall to provide the other setting.
For additional specification detail, refer to document
XL-PH10399.
IMPORTANT: There is no secondary lock mechanism.
4HISCOUPLERISNOTDESIGNEDFOROVER
the-road applications.
INTERNALLY MOUNTED PIN SPRING AND INTEGRAL
KEYWAY FOR HANDS-FREE HOLD OPEN PIN POSITION
Steel spring is
mounted inside
the robust pin to
protect it from
impact damage.
38
Keyway is designed into
the pin, and the key is
designed into the frame.
This eliminates the need
TO@HUNTFORTHEKEYWAY
when opening and closing.
1/8 Turn for
‘Hold-Open’
Position
Integral
Keyway
Key
The integral keyway also
INCLUDESA@HOLDOPEN
position via a 1/8-turn of
the handle.
“Flex-Mount” Bolt Pattern
PINTLE HOOKS
BH-200RN8
BH-50mmRN
PH-10RP
PH-T-60-AOL-8
PH-30RP
E-HITCH
EH-20
EH-40
EH-3050 bolt pattern is interchangeable with the above HOLLAND models.
VARIABLE FOUR (4) BOLT MOUNTING PATTERN
Use only Grade 8 bolts.
Two 1/2˝ bolts are required for all installations in either the top or middle rows.
Two bolts are required in the bottom row.
For 30,000 lb. (13,610 kg) MDBP installation, use upper slot sized for 1/2˝ bolts.
For 50,000 lb. (22,680 kg) MDBP installation, use lower slot sized for 5/8˝ bolts.
Dimensions - Inch (mm)
HANDLE IN
THE DROP
POSITION
HANDLE
IN UPRIGHT
POSITION
PIN
GUARD
Replacement Parts
HANDLE
BOLT
HANDLE
LOCK NUT
PIN
RK-11438
(Washers)
15.53
(394.4)
3.50
(88.9)
12.42
(315.4)
3.50
2X (88.9)
(Handle,
Bolt,
Locknut)
Ø.53
6X(13.5)
12.42
(315.5)
9.31
(236.4)
RK-11440
3.38
(85.7)
1.75
2X(44.5)
RK-11439
(Pin, Spring,
Bolt, Locknut)
FRAME
3.93
(99.9)
5.68
(144.3)
INTERNAL
SPRING
3.50
(88.9)
Ø.66
2X (16.7)
EH-20/40/60
NOT FOR SALE
RK-10244-A
(Pin, Handle, Spring)
Replacement Parts
XA-10244-A
Nylon Cable Ties
XB-21-S-376-1750S
(For spring
installation only)
s 2EFERENCE3!&(/,,!.$
document number XL-PH347
Replacement Procedure.
XB-10245
39
Lunettes – Weld-on Lunettes (Industrial / GSE)
DB-010EJ1 and DB-020FK1
s
s
s
s
&ORGEDONEPIECESTEELALLOYLUNETTES
.ONHARDENEDNONPAINTEDFORWELDABILITY
)NTENDEDFORINDUSTRIALTRUCKAND'3%APPLICATIONS
4ESTEDINACCORDANCEWITH3!%*
DB-010EJ1
DB-020FK1
Weld onto 2˝x 4˝ (11
gauge) structural tubing
Forged steel universal
weld-on lunette
Rigid Tongue Trailers
Hinged Tongue Trailers
Weight
500 lb. Maximum Vertical Load
Capacities
lb.
kg
lb.
kg
lb.
kg
DB-010EJ1
2.88˝ Eye
GTW
VERTICAL
10,000
2,000
4,536
907
20,000
500
9,072
227
15
6.8
DB-020FK1
3˝ Eye
GTW
VERTICAL
20,000
4,000
9,072
1,814
40,000
500
18,144
227
22
10
s &ORADDITIONALSPECIFICATIONSREFERTODOCUMENT8,$"
Mounting Dimensions
DB-010EJ1
DB-020FK1
See note*
4.32˝
2.25˝
3.75˝
1.69˝
.91˝
See note**
.38˝
5.9˝
2.75˝
3.00˝
2.5˝
1˝ DIA.
6.25˝
2.88˝
1.63˝
DIA.
4.88˝
*NOTE: A minimum of 12˝ linear inches of .38˝ weld on
2˝x 4˝ (11 gauge) structural tubing required to
obtain ratings.
40
**NOTE:
8.5˝ of linear weld .38˝ bevel groove weld
(3˝x 1.25˝ bar used) required to obtain ratings.
DRAWBARS
TITLE HERE
s FastLatch
s
s Compatibility
CombinationChart
Ball / Hook
s
Bolt-On/Weld-On
s Rigid
RigidMount
Mount
s
Cushioned
s Air
Swivel
Mount
s
Mount
s Swivel
NoLube
s Air Cushioned
Drawbar Compatibilty
NON-ROAD
IND/GSE USE ONLY
R
R
DRAWBAR NUMBER
DB-010EJ1 DB-020FK1 DB-1250-3
R
R
R
DB-1228-1
DB-1238
R
Max Vertical Load
GTW
GTW w/500 lbs. Vertical
Eye I.D. Diameter
2,000
10,000
20,000
2.5˝
R
DB-030DQ1 DB-1235-1
R
R
R
R
DB-1235-3 DB-040DQ1 DB-1245-1 DB-1249-2H DB-1249-49
4,000
20,000
40,000
3˝
3,000
15,000
50,000
2.5˝
4,000
20,000
60,000
2.5˝
4,500
22,000
70,000
3˝
6,000
30,000
38,000
2.5˝
7,000
35,000
90,000
3˝
7,000
35,000
90,000
3˝
8,000
40,000
60,000
2.5˝
8,000
40,000
90,000
2.38˝
9,000
45,000
85,000
3˝
9,000
45,000
85,000
3˝
PINTLE HOOK MODEL MAX GTW
PH-10RP
BH-200RN
BH-50mmRN
PH-T-60-AOS-L-8
PH-T-60-AOL-8
PH-30RP
PH-30SA
PH-30SB
PH-300 / 300-R
PH-210
PH-310
PH-400 / 400-H
PH-410
PH-419
PH-550
PH-760
PH-775
R
R
R
S
R
R
S
S
R
R
R
R
R
R
R
S
S
10,000
20,000
20,000
18,000
30,000
30,000
30,000
30,000
72,000
90,000
100,000
100,000
100,000
100,000
100,000
49,000
100,000
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
R
R
S
R
S
S
30,000
52,000
100,000
100,000
100,000
100,000
X
X
O
O
O
O
X
X
O
O
O
O
X
X
O
O
O
O
X
X
O
O
O
O
X
X
O
O
O
O
X
X
O
O
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
O
O
O
X
O
O
O
O
O
X
X
O
O
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
COUPLER MODEL
CP-400-H
CP-360
CP-730
CP-740
PH-990ST71
PH-995SH71
INDUSTRIAL / AVIATION GROUND SUPPORT EQUIPMENT (Non-Road)
CP-400-GSE / CA R
EH-3050
R
R = RIGID
S = SWIVEL
30,000
50,000
X
X
X
X
X
X
X
X
X = COMPATIBLE
O = NOT COMPATIBLE
This information reflects only the dimensional compatibility between HOLLAND lunettes (eyes)
and HOLLAND pintle hook horns, coupler jaws and clevis pins.
This information is not an assurance of operational or application compatibility between coupling
PRODUCTS#OMPATIBILITYOFTHECOMPLETE@COUPLINGSYSTEMREQUIRESADDITIONALINFORMATION
Please go to the Reference Sections of this catalog (page 59) for helpful information, including:
s 3AFETY)NFORMATION
s #OUPLING3YSTEM3ELECTION
s /PERATING#ONDITIONS
s -OUNTING)NFORMATION
42
Drawbar Compatibilty
S
S
R
S
S
R
R
DB-045BS1
DB-045BW1
DB-610-30
DB-060FQ1
DB-1407-S
DB-1407-SE
DB-1407-L-1
DB-1407-S-1
9,000
45,000
85,000
2.38˝
9,000
45,000
85,000
2.38˝
9,000
45,000
85,000
3˝
15,000
60,000
90,000
3˝
500
40,000
40,000
2.38˝
500
34,000
34,000
2.38˝
16,000
85,000
120,000
2.38˝
16,000
85,000
120,000
2.38˝
X
X
X
O
X
X
O
O
X
X
X
X
X
X
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
X
O
O
X
X
X
X
X
O
X
O
O
X
X
X
O
X
X
O
O
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
X
O
O
X
X
O
O
O
O
X
O
O
O
O
O
X
O
O
O
O
O
X
O
O
O
O
O
R
R
DB-1407-SE-1
DB-1400
DB-1400AC
DB-1422
DB-100FQ1
16,000
85,000
120,000
2.38˝
18,000
90,000
120,000
2.38˝
18,000
90,000
120,000
2.38˝
18,000
90,000
120,000
2.38˝
20,000
100,000
125,000
3˝
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
O
O
O
O
X
O
O
O
O
O
X
O
O
O
O
O
X
O
O
O
O
O
X
O
O
O
O
O
X
X
O
O
O
O
X
X
X
X
X
X
X
X
X
X
X
X
PINTLE HOOK MODEL MAX GTW
X
X
X
X
X
X
X
X
X
X
X
X
X
O
X
O
O
X
X
X
O
X
X
O
O
X
X
X
X
X
O
X
O
O
COUPLER MODEL
X
O
O
O
O
O
X
O
O
O
O
O
INDUSTRIAL / AVIATION GROUND SUPPORT EQUIPMENT (Non-Road)
X
X
R = RIGID
S = SWIVEL
X
X
X
X
X
X
X
X
X
X
X
X
X = COMPATIBLE
O = NOT COMPATIBLE
This information reflects only the dimensional compatibility between HOLLAND lunettes (eyes)
and HOLLAND pintle hook horns, coupler jaws and clevis pins.
This information is not an assurance of operational or application compatibility between coupling
PRODUCTS#OMPATIBILITYOFTHECOMPLETE@COUPLINGSYSTEMREQUIRESADDITIONALINFORMATION
Please go to the Reference Sections of this catalog (page 59) for helpful information, including:
s 3AFETY)NFORMATION
s #OUPLING3YSTEM3ELECTION
s /PERATING#ONDITIONS
s -OUNTING)NFORMATION
43
Drawbars – Rigid Mount Bolt-On (Shank Mount)
DB-1250-3 and DB-1249-2H
s
s
s
s
&ORGEDONEPIECESTEELALLOYDRAWBAR
(EATTREATEDFORSTRENGTH
)$OFEYEISINDUCTIONHARDENEDFORWEARRESISTANCE
DB-1250-3
XB-T-60
1.50˝ O.D. shank.
Replacement Parts
DB-1249-2H
Replacement Parts
2˝ O.D. shank.
XB-121
XB-T-9N
XB-T-316-A
XB-T-318
XA-T-56
Weight
500 lb. Max. Vertical Load
lb.
kg
lb.
kg
lb.
kg
DB-1250-3
2.5˝ Eye
Capacities
GTW
VERTICAL
15,000
3,000
6,804
1,361
50,000
500
22,680
227
9
4
DB-1249-2H
3˝ Eye
GTW
VERTICAL
45,000
9,000
20,412
4,082
85,000
500
38,556
227
14
6.4
s .OTRECOMMENDEDFORSWIVELMOUNTAPPLICATIONS
s 7HENMOUNTEDHIGHCLAMPFORCEISREQUIREDTOPROVIDERATEDCAPACITIES
s &OROFFROADAPPLICATIONSREDUCEPUBLISHEDCAPACITIESBYANDUSEWITH
SWIVELMOUNTCOUPLING
s &ORADDITIONALSPECIFICATIONSREFERTODOCUMENTS8,$"AND8,$"
Mounting Dimensions
DB-1250-3
DB-1249-2H
9.12˝
1.50˝ 1.50˝- 6 UNC-2A
THREAD
5.50˝
DIA.
1.25˝
6.25˝
DIA.
1.50˝
2.50˝
DIA.
1.75˝
1.63˝
DIA.
2˝-4.5 UNC-2A
THREAD
3.0˝
DIA.
2.03˝
1.53˝
.15x
45°*
.19˝x 45° *
3.12˝
3.25˝
3.12˝
10.51˝
4.25˝
*NOTE: The mounting surface must have an adequate
chamfer, as shown above, so that the drawbar
mounts flush with the mounting surface.
44
Drawbars – Rigid Mount Bolt-On (4 Bolt Flange Mount)
DB-040DQ1, DB-060FQ1 and DB-100FQ1
s &ORGEDONEPIECESTEELALLOYDRAWBAR
s (EATTREATEDFORSTRENGTH
DB-040DQ1
DB-060FQ1
DB-100FQ1
Capacities
lb.
kg
lb.
kg
Weight
Dimension
‘A’
Grade 8
Fastener Size
lb.
kg
DB-040DQ1
2.5˝ Eye
GTW
VERTICAL
40,000
8,000
18,144
3,629
60,000
500
27,216
227
0.656˝
5/8˝
14
6.4
DB-060FQ1
3˝ Eye
GTW
VERTICAL
60,000
15,000
27,216
6,804
90,000
500
40,824
227
0.780˝
3/4˝
19
8.6
DB-100FQ1
3˝ Eye
GTW
VERTICAL
100,000
20,000
45,360
9,072
125,000
500
56,700
227
0.910
7/8˝
19
8.6
s IMPORTANT – DO NOT WELDn.OTDESIGNEDFORWELDEDINSTALLATION
s 5SEONLY'RADEBOLTSAND'RADE#LOCKNUTS
s &OROFFROADAPPLICATIONSREDUCEPUBLISHEDCAPACITIESBYANDUSEWITH
SWIVELMOUNTCOUPLING
Mounting Dimensions
DB-040DQ1
DB-060FQ1 & DB100FQ1
6.83˝
6.13˝
‘A’
3.71˝
2.25˝
3.38˝
3.00˝
1.25˝x 1.5˝
DIA.
6.62˝
4.50˝
.87˝
2.25˝
.75˝
2.25˝
1.63˝
DIA.
4.50˝
2.25˝
6.38 ˝
4.50 ˝
1.63˝
1.44 ˝
2.5˝ DIA.
‘A’
.63˝
4.50˝
1.25˝x 1.5˝
DIA.
6.38˝
.71˝
1.63˝
DIA.
6.00˝
45
Drawbars – Rigid Mount, Rectangular & Square Shank (Bolt On)
DB-1228-1, DB-1238, DB-1245-1, DB-1235-1 & DB-1235-3
s
s
s
s
&ORGEDONEPIECESTEELALLOYDRAWBARS
DB-1228-1
DB-1238
DB-1245-1
DB-1235-1
DB-1235-3
SAF-HOLLAND testing confirms that the type of drawbar mount for a rigid
TONGUETRAILERCANAFFECTTHEVERTICALLOADCAPACITYOFTHETONGUEDRAWBAR
assembly due to the bolt loads associated with the particular mounting
type (reference chart below).
When used in hinged tongue
trailer applications where
MAXIMUMVERTICALLOADCANNOT
exceed 500 lbs. (227 kg).
Hinged tongue capacities are not
AFFECTEDBYOVERUNDERTONGUE
mounting.
TONGUE
TONGUE
Over-Tongue Mount
Under-Tongue Mount
Vertical rating may be increased by
FROMOVERTONGUEMOUNT
Capacities
lb.
kg
lb.
kg
DB-1228-1
2.5˝ ID Eye
GTW
VERTICAL
20,000
4,000
9,072
1,814
DB-1238
3˝ ID Eye
GTW
VERTICAL
22,000
4,500
DB-1245-1
2.38˝ ID Eye
GTW
VERTICAL
DB-1235-3
3˝ ID Eye
DB-1235-1
3˝ ID Eye
lb.
kg
GTW
VERTICAL
20,000
6,000
9,072
2,722
GTW
VERTICAL
60,000
500
27,216
227
9,979
2,041
GTW
VERTICAL
22,000
6,750
9,979
3,062
GTW
VERTICAL
70,000
500
31,752
227
40,000
8,000
18,144
3,629
GTW
VERTICAL
40,000
12,000
18,144
5,433
GTW
VERTICAL
90,000
500
40,824
227
GTW
VERTICAL
35,000
7,000
15,876
3,175
GTW
VERTICAL
35,000
10,500
15,875
4,763
GTW
VERTICAL
90,000
500
40,824
227
GTW
VERTICAL
35,000
7,000
15,876
3,175
GTW
VERTICAL
35,000
10,500
15,876
4,763
GTW
VERTICAL
90,000
500
40,824
227
s 3!&(/,,!.$RECOMMENDSTHATALLBOLTHOLESBEUSED
s 5SEONLY'RADEBOLTSAND'RADE#LOCKNUTS
s IMPORTANT – DO NOT WELDn.OTDESIGNEDFORWELDEDINSTALLATION
s &OROFFROADAPPLICATIONSREDUCEPUBLISHEDCAPACITIESBYANDUSE
WITHSWIVELMOUNTCOUPLING
46
Drawbars – Rigid Mount, Rectangular & Square Shank (Bolt On)
Mounting Dimensions
DB-1228-1
DB-1238
17.25˝
.656˝ DIA. HOLES
A
B
3˝
1.50˝
4.50˝
2.0˝
TYP.
E
.75˝
Dimensions
Weight
A
B
E
lb.
kg
DB-1228-1
2.50˝
1.25˝ x 1.50˝ Oval
1.25
20
9.1
DB-1238
3.0˝
1.63˝ Round
1.62˝
26
11.8
Mounting Dimensions
DB-1245-1
DB-1235-1
DB-1235-3
17.25˝
D
.656˝ DIA. HOLES
A
1.63˝
DIA.
1.50˝
B
2.0˝
TYP.
E
C
Dimensions
A
B
C
Weight
D
E
lb.
kg
DB-1245-1
2.38˝
6.0˝
0.75˝
3.0˝
3.0˝
41
18.6
DB-1235-3
3.0˝
6.5˝
0.75˝
3.0˝
3.0˝
41
18.6
DB-1235-1
3.0˝
6.0˝
0.82˝
3.12˝
3.12˝
42
19.1
47
Drawbars – Rigid Mount, Weld-On
DB-1400 and DB-1422
s )$OFEYEISINDUCTIONHARDENEDFORWEARRESISTANCE
DB-1400
DB-1422
Use with 3˝ channel or rectangular
tube mounting configuration.
Use with 3˝ channel
or square tubing.
Weld tabs can be heated and
bent ± 10° to accommodate
installation requirements.
Designed for 20° minimum
and 60° maximum angle.
Designed for 30° angle.
Weight
lb.
kg
lb.
kg
lb.
kg
DB-1400
2.38˝ Eye
Capacities
GTW
VERTICAL
90,000
18,000
40,824
8,165
120,000
500
54,432
227
14
6.4
DB-1422
2.38˝ Eye
GTW
VERTICAL
90,000
18,000
40,824
8,165
120,000
500
54,432
227
11
5
s &OROFFROADAPPLICATIONSREDUCETHEPUBLISHEDCAPACITIESBY
ANDUSEWITHASWIVELMOUNTCOUPLING
Mounting Dimensions
5.63˝
1.63˝
1.63˝ DIA.
2.38˝ DIA.
2.88˝
26 LINEAR
INCHES
1.63˝
2.38˝ DIA.
1.69˝
1.69˝
2.75˝
2.25˝
4.0˝
32 LINEAR
INCHES
.38˝
5.62˝
45 °
.38˝
7.50˝
1.56˝
3.5˝
WILL
ACCEPT
20°- 60° CHANNE L
SPREAD
2.06˝
30°
48
Drawbars – Rigid Mount, Weld-On, ‘Air-Cushioned’
DB-1400AC Series: DB-1400AC-1, DB-1400AC-2, DB-1400AC-3, DB-1400AC-4
s )$OFEYEISINDUCTIONHARDENEDFORWEARRESISTANCE
Mounting Dimensions
1.63˝
DIA.
Use with 3˝ channel
or square tubing.
26 LINEAR
INCHES
Designed for 20° minimum
and 60° maximum angle.
2.7˝
.38˝
Snubber force is developed
by the vehicle’s air system to
provide shock absorption.
1.56˝
5.7˝
3.50˝
WILL ACCEPT 20° TO 60°
CHANNE L SPREAD
Weight
Capacities
DB-1400AC
2.38˝ Eye
GTW
VERTICAL
lb.
kg
lb.
kg
lb.
kg
90,000
18,000
40,824
8,165
120,000
500
54,432
227
14
6.4
ANDUSEWITHASWIVELMOUNTCOUPLING
Replacement Parts
B
XA-1403
A
Drawbar includes
a plunger and
turnbuckle
XB-16594
A = Distance required to mount air chamber
B = Rod length
XA-04297
XA-1404-1 (12˝)
XA-1404-2 (8˝)
XA-1404-3 (7˝)
XA-1404-4 (10˝)
MODEL*
DB-1400AC-1
DB-1400AC-2
DB-1400AC-3
DB-1400AC-4
DIM “A”
15.25˝
11.25˝
10.25˝
13.25˝
DIM “B”
12.00˝
8.00˝
7.00˝
10.00˝
*Air cylinder is NOT included; order separately.
49
Drawbars – Bolt-On (Shank Mount)
DB-1407
s
s
s
s
Capacities
DB-1407-L-1/-S-1/-SE-1
2.38˝ Eye
GTW
VERTICAL
lb.
kg
85,000
16,000
38,556
7,258
GTW
VERTICAL
lb.
kg
120,000
500
54,432
227
25% and use with a rigid-mount coupling.
Mounting Dimensions
A
B
C
Replacement Parts
3.75˝
2.38˝
DIA.
1.56˝
DIA.
D**
5.13˝
.31˝ R
2.00˝ DIA.
(2.03˝ HOLE SIZE)
6.50˝
1.63˝
MODEL NO.
A
B
C
**CHAMFER
D
WEIGHT
lb.
kg
DB-1407-S-1*
11.62˝
9.6˝
9.5˝
.38˝ x 45°
24
10.9
DB-1407-L-1*
12.25˝
10.3˝
10.1˝
.38˝ x 45°
25
11.3
DB-1407-SE-1*
13.13˝
11.1˝
11.0˝
.38˝ x 45°
26
11.8
* Includes drawbar washer, nut and retaining ring.
** The mounting surface must have adequate chamfer, as
shown above, so that the drawbar mounts flush with the
mounting surface.
50
XB-T-318
XB-05788
XB-05789
Drawbars – Swivel Mount Assembly (with Rubber Cushion)
DB-1407-SE and DB-1407-S Weld-On Assemblies
s
s
s
s
s
3TEELHOUSINGFEATURESREPLACEABLERUBBERBUSHINGS
Weight
Capacities
lb.
kg
lb.
kg
DB-1407-SE
2.38˝ Eye
GTW
VERTICAL
34,000
500
15,422
227
50
22.6
DB-1407-S
2.38˝ Eye
GTW
VERTICAL
40,000
500
18,144
227
45
20.4
s 2UBBERCUSHIONEDHOUSINGSARERECOMMENDEDFORHINGEDTONGUETRAILERAPPLICATIONSONLY
s &OROFFROADAPPLICATIONSREDUCETHEPUBLISHEDCAPACITIESBYANDUSEWITHASWIVELMOUNTCOUPLING
s &ORADDITIONALSPECIFICATIONSREFERTODOCUMENTS8,$"AND
Mounting Dimensions
DB-1407-S
DB-1407-SE
.38˝
Minumum of 34 linear inches
of .38˝ fillet weld is required
to develop rated capacity.
.38˝
11.62˝
9.5˝
3.75˝
13.13˝
11.0˝
Minimum of 34 linear inches
of .38˝ fillet weld is required
to develop rated capacity.
3.75˝
1.56˝
DIA.
1.56˝
DIA.
5.50˝
DIA.
2.38˝
DIA.
2.38˝
DIA.
5˝
DIA.
1.63˝
.37˝
.44˝
9.63˝
1.63˝
6.50˝
8.25˝
6.50˝
.38˝
Replacement Parts
XB-05789
XB-05789
XA-05809
XA-05798
XA-05799
XA-05807
XB-05813
XA-05833-SE
XA-05833-S
XB-05788
XB-05808
XB-05788
XB-05813
XB-05808
51
Drawbars – Swivel Mount Assembly
DB-045BW1 Weld-On Assembly
s 3TEELBLOCKHOUSINGFEATURESCLOSEDIMENSIONALTOLERANCES
s &EATURESGREASEZERKFOREASYLUBRICATION
Replacement Parts
XB-121
XB-T-316-A
XB-T-318
DB-045BS1 Bolt-On Drawbar
XA-610-23
s
s
s
s
XB-767
DB-045BW1
DB-045BS1
500 lb. Max. Vert. Load
Weight
Capacities
lb.
kg
lb.
kg
lb.
kg
DB-045BW1 Assembly
2.38˝ Eye
GTW
VERTICAL
45,000
9,000
20,412
4,082
85,000
500
38,556
227
38
17.2
DB-045BS1 Drawbar
2.38˝ Eye
GTW
VERTICAL
45,000
9,000
20,412
4,082
85,000
500
38,556
227
23
10.4
s &OROFFROADAPPLICATIONSREDUCETHEPUBLISHEDCAPACITIESBYANDUSEWITHARIGIDMOUNTCOUPLING
s &ORADDITIONALSPECIFICATIONSREFERTODOCUMENT8,$"OR8,$"
Mounting Dimensions
* See note below
.38˝
1.56˝
15.0˝ REF
5.12˝
15.0˝
3.75˝
Ø2.38˝
8.5˝
1.63˝
2.38˝
6.00˝
12.25˝
3.75˝
3˝ (DEPTH)
* See note below
.38˝
6˝
Ø2.38˝
CLEARANCE
HOLE
.38˝
*NOTE: Minimum of 24 linear inches of .38˝ fillet
weld required to develop rated capacity.
52
NOTE: The mounting surface must have an adequate
Drawbars – Swivel Mount Assembly
DB-610-30 Weld-On Assembly
s 3TEELBLOCKHOUSINGFEATURESCLOSEDIMENSIONALTOLERANCES
s &EATURESGREASEZERKFOREASYLUBRICATION
Replacement Parts
XB-121
XB-T-316-A
DB-1249-49 Bolt-On Drawbar
s
s
s
s
XB-T-318
XA-610-23
XB-767
DB-610-30
DB-1249-49
Weight
500 lb. Max. Vert. Load
Capacities
lb.
kg
lb.
kg
lb.
kg
DB-610-30 Assembly
3˝ Eye
GTW
VERTICAL
45,000
9,000
20,412
4,082
85,000
500
38,556
227
36
16.3
DB-1249-49 Drawbar
3˝˝ Eye
GTW
VERTICAL
45,000
9,000
20,412
4,082
85,000
500
38,556
227
24
10.9
s &OROFFROADAPPLICATIONSREDUCETHEPUBLISHEDCAPACITIESBYANDUSEWITHARIGIDMOUNTCOUPLING
s &ORADDITIONALSPECIFICATIONSREFERTODOCUMENT8,$"OR8,$"
Mounting Dimensions
* See note below
.38˝
17.12˝
17.125˝ REF .
6.25˝
DIA.
4˝
3˝
DIA.
5.5˝
1.63˝
DIA.
SECTION
6.25˝
DIA.
3˝ (DEPTH )
.38˝
2˝
.38˝
6˝
14˝
3.00˝
DIA.
1.63˝ DIA.
SECTION
5.50˝
6˝
14.00˝
* See note below
*NOTE: Minimum of 24 linear inches of .38˝ fillet
weld required to develop rated capacity.
NOTE: The mounting surface must have an adequate
53
THIS PAGE INTENTIONALLY LEFT BLANK
54
COUPLING
ACCESSORIES
s Drawbar Guides
s Pintle Hook Wear Gages
s Plunger Adjustment Gages
s Tow Hooks
s Dolly Master
Coupling Accessories
Drawbar Guides: XA-02556 (left) and XA-02555 (right)
Application
Used in conjunction with PH-210,
PH-300(R), PH-310, PH-400(H),
PH-410, PH-419 and PH-550 Series
pintle hooks to simplify the coupling
procedure by guiding the drawbar
into the pintle hook throat.
3.00˝
For installation instructions, refer to
document number XL-PH353.
7.75˝
XA-02556
XA-02555
Left drawbar guide
Pintle Hook Wear Gages
Right drawbar guide
PINTLE HOOK
WEAR GAGE
PH-550
TF-10520
PH-200, PH-210, PH-300, PH-400, PH-400-H,
PH-310 & PH-410
TF-10612 (shown)
PH-760 and PH-775
TF-10521
PH-T-60-AOL-8, PH-T-60-AOS-L-8,
PH-30, PH-35
TF-10522
PH-T-90-A and PH-T-126-A
TF-10523
PH-30RP, PH-30SA, PH-30SB
TF-10960
PH-10RP with Frame Numbers XD-11047 or
XE-10634
TF-10960
PH-10RP with Frame Number XD-11047-10
TF-11402
Plunger Adjustment Gages
Application
The plunger adjustment gage establishes proper air cylinder
plunger adjustment.
PH-200, PH-300, PH-400, PH-400-H
and PH-550 Series
PH-210, PH-310 and PH-410 Series
TF-03147
PLUNGER
TF-03147-10
PLUNGER
PLUNGER
ADJUSTMENT
TOOL
PLUNGER
ADJUSTMENT
TOOL
LOCK NUT
HORN
LOCK
NUT
HORN
Product Information
operating instructions, refer to document number XL-PH304.
56
s .OTAVAILABLEFOR0(
Tow Hooks – Heavy-Duty
TH-10050-3 and TH-10050-5
Application
Mounting Dimensions
Super strong and tough, these tow hooks are designed to be used in pairs
for a tow cable or chain attachment. The tow hooks are designed for
emergency towing only. Forges steel alloy tow hooks are heat treated and
angled configuration to be used in pairs.
TH-10050-3L, -3R
3.6˝
3.9˝
2.0˝
6.4˝
7.3˝
3˝
TH-10050-3L, -3R or -3B for boxed pair
1.0˝
.94˝ .6˝
.8˝
2.4˝
Use (2) 3/4˝ Grade 8 bolts
3.2˝
.781˝
TYPICAL
TH-10050-5L, -5R or -5B for boxed pair
Use (2) 20mm Grade 8 bolts
Full Face* Mount rating: 45,000 lbs. (20,410 kg)
Full Cantilevered** rating: 33,000 lbs. (14,970 kg)
TH-10050-5L, -5R
92mm
Weight: 4.6 lbs. (2.1 kg) each
*Full Face Mount
The mounting face of the
tow hook is fully supported.
**Cantilevered Mount
The mounting surface of the tow hook
extends beyond the mounting structure.
100mm
50mm
186mm
163mm
80mm
Max. 1˝
25mm
20mm 15mm
20mm
60mm
81mm
21mm
TYPICAL
s &ORMOREPRODUCTSPECIFICMOUNTINGINFORMATIONANDOPERATING
instructions, refer to document number XL-PH-310.
Drawbar Hinge and Frame Brackets: XD-5275, XD-5315, RK-1024, XB-1020
XD-5275
RK-1024
Description
Description
Drawbar front bracket.
Replaces Fruehauf part FLA-005275
Equalizer bushing assembly.
Capacities
200 lbs. Maximum Vertical Load
XD-5315
XB-1020
Description
Description
Drawbar hinge.
Replaces Fruehauf part FCA-005315
Bushing.
Replaces Fruehauf part UXA-00000
Capacities
200 lbs. Maximum Vertical Load
57
Coupling Accessories
TF-675 and TF-675-1 Dolly Master™
Application
TF-675 Mounting Dimensions
The Dolly Master PROVIDESALOWCOSTEFFICIENTWAYto position
converter dollies in the yard. The Dolly Master is an air-operated, truckMOUNTEDSTEELFRAMEASSEMBLYTHATINCLUDESAVERTICALSLIDEWITHGUIDE
ramps to which a 1.75˝ diameter coupling pin is attached. A double-acting
air cylinder, which uses the truck’s air supply, raises and lowers the slide. A
CONTROLVALVEISOPERATEDFROMWITHINTHECAB
TM
IMPORTANT:
26.25˝
14.75"
The Dolly Master is not intended for use in trailer
spotting or coupling.
6.0˝
12.00˝
8.50˝
TF-675
VERTICAL SLIDE
The Dolly Master can
be bolted or welded
to the tow vehicle.
The stop mechanism
holds the dolly
tongue securely
while repositioning
the dolly.
It has few moving
parts so it’s easy to
maintain.
The air cylinder (not
shown) actuates the
slide by utilizing the
tractor air supply.
Up/Down cab control
allows the driver to
secure and release
the dolly from within
the cab.
Replacements Parts
XB-0839
XB-698
XB-E-540 XB-C-375-C-125
XB-01996
(4 REQ.)
XA-686
XA-694
XB-T-61
(4 REQ.)
XA-687
XB-T-69-A
COUPLING PIN
XA-07839 TUBE
(CYLINDER PROTECTION)
XA-2524-R-12
XB-1031
TF-675-1
VERTICAL SLIDE
TF-675-1 Mounting Dimensions
The air cylinder (not
shown) actuates the
slide by utilizing the
tractor air supply.
26.25˝
The stop mechanism
holds the dolly
tongue securely while
repositioning the dolly.
COUPLING PIN
Weight: 116 lbs.
6.00˝
12.00˝
8.625˝
Replacements Parts
Capacities
XB-C-95
XB-T-69-C
XA-2524-R-12
390 lbs. (177 kg) Maximum Vertical Load
XA-08370
XA-08364
XB-T-61
(4 REQ.)
XA-2524-R-13-1
A
XB-T-69-C
XB-C-95
B C
A
D
58
XA-08361
TF-675-1
TF-675
A
B
C
D
B C
D
Maximum drawbar
ELEVATIONRANGE
12˝ usable stroke
14.75˝ total stroke
0ROVIDEADEQUATECLEARANCE
A
B
C
D
Maximum drawbar
ELEVATIONRANGE
12˝ usable stroke
14.75˝ total stroke
0ROVIDEADEQUATECLEARANCE
XB-05679-2
XB-698
XB-01996
XB-E-540
XB-0839
XB-C-375-C-125
(4 REQ.)
XA-08375
s &ORMOREPRODUCTSPECIFICMOUNTINGINFORMATION
and operating instructions, refer to document
number XL-PH-240-01.
REFERENCE
SECTIONS
s Safety Information
s Warranty
s Coupling System Selection
s Operating Conditions
s Cushioning Systems
s Mounting Information
s Glossary
General Safety Information
Introduction
In the following section of this catalog, you will notice the
terms “IMPORTANT” and “WARNING” followed by important
PRODUCTINFORMATION4HOSETERMSAREDESCRIBEDASFOLLOWS
IMPORTANT: Included additional information that if not
followed could lead to hindered product
performance.
Indicates a potentially hazardous situation
WHICHIFNOTAVOIDEDCOULDRESULTINDEATH
or serious injury.
In the safety information below, you will notice the term
‘WARNING’ which indicates a potentially hazardous
SITUATIONWHICHIFNOTAVOIDEDCOULDRESULTINDEATHOR
serious injury.
1. Always read the Product Specification Sheet or
Owner’s Manual associated with each product before
installation or use of the product. These manuals are
shipped with each product or can be obtained from
the SAF-HOLLAND website at www.safholland.us.
2. Do not modify or add to these products.
.EVEREXCEEDTHEMANUFACTURERSRATEDCAPACITIESOF
ACOUPLINGDEVICEINCLUDING-AXIMUM'ROSS4RAILER
Weight and Maximum Vertical Load.
&OROVERTHEROADAPPLICATIONS3!&(/,,!.$
RECOMMENDSTHATACOUPLINGDEVICEBEEQUIPPEDWITH
both a primary and secondary lock.
&OROFFROADAPPLICATIONSORVEHICLEOPERATIONOVER
ROUGHTERRAINUSEASWIVELMOUNTCOUPLINGDEVICE
with a rigid-mount drawbar, or 2) a rigid-mount
COUPLINGDEVICEWITHASWIVELMOUNTDRAWBAR.EVER
USEASWIVELMOUNTCOUPLINGDEVICEWITHASWIVEL
mount drawbar.
6. For rigid tongue trailers towed with ball, pintle hook
ORCOUPLERSTYLECOUPLINGDEVICESMOSTHITCHANDTRAILER
MANUFACTURERSRECOMMENDAVERTICALTONGUELOADOF
10% - 15% of the gross trailer weight (GTW). Do not
TOWATRAILERTHATHASANEGATIVEVERTICALLOAD
IMPORTANT: Do not weld on these products, except
as specified by SAF-HOLLAND for welded
installation.
Weld repairs to repair a broken part or to
build-up a worn surface are strictly
forbidden. Such weld repairs could locally
alter the chemistry and heat treatment of
the metal, alter the strength of the coupling
DEVICEORCREATEASTRESSCONCENTRATIONTHAT
could result in structural failure resulting in
death or serious injury.
60
0RIORTOUSEALWAYSINSPECTACOUPLINGDEVICEFOR
EXCESSIVEWEARCRACKSBENTORDEFORMEDCOMPONENTS
secure mounting, and damaged or missing parts.
)MMEDIATELYINSPECTACOUPLINGDEVICEWHICHHASBEEN
SUBJECTEDTOOVERLOADORBINDINGDUETOJACKKNIFINGOR
EXCESSIVEARTICULATION
&AILURETOINSPECTACOUPLINGDEVICEPRIOR
TOUSECOULDRESULTINVEHICLEANDTRAILER
SEPARATIONWHICHIFNOTAVOIDEDCOULD
result in death or serious injury.
.EVERSTRIKEANYPARTOFACOUPLINGPRODUCTWITHA
hammer or other tool as parts could break.
-OUNTINGBOLTSMUSTBELONGENOUGHTOPROVIDEA
minimum of two (2) full threads beyond the end of the
nut. Always use ASTM Grade 8 bolts with ASTM Grade
C lock nuts with hardened steel washers for installation
and mounting. Torque to manufacturer’s specifications
ANDDONOTOVERTORQUE
Failure to use a long enough bolt or
proper fastener type for mounting could
RESULTINVEHICLEANDTRAILERSEPARATION
WHICHIFNOTAVOIDEDCOULDRESULTIN
death or serious injury.
11. Verify that the drawbar size is compatible with the
COUPLINGDEVICEOFTHETOWVEHICLE2EFERTOTHE
‘Drawbar Compatibility Chart’ located in this catalog.
12. Verify that a pintle hook latch closes and locks
completely prior to use.
Failure to correctly close and lock a pintle
HOOKLATCHCANRESULTINVEHICLEANDTRAILER
SEPARATIONWHICHIFNOTAVOIDEDCOULD
result in death or serious injury.
13. Check the pintle hook latch gap, which is the space
between a closed latch and the top of the pintle hook
horn. If the latch gap is 0.38˝ (9.5mm) or larger, do not
use the pintle hook.
$ONOTOVERARTICULATEACOUPLINGCONNECTIONBY
JACKKNIFINGORBINDINGDURINGVEHICLEOPERATIONS
&AILURETOAVOIDOVERARTICULATIONOFA
coupling connection due to jackknifing
or binding could result in failure of the
COUPLINGDEVICESWHICHIFNOTAVOIDED
could result in death or serious injury.
15. Do not apply grease or other lubricants to the hook
OFTHECOUPLINGDEVICEORDRAWBAREYEWHICHMAY
TRAPABRASIVESANDANDDIRTWHICHCANACCELERATEWEAR
in the coupling connection. Additionally, grease or
other lubricants can hide cracks or damage present in
coupling components.
16. Follow inspection and maintenance guidelines listed
in the Product Specification Sheet or Owner’s Manual
AVAILABLEFROMTHECOUPLINGMANUFACTURER
17. Always use SAF-HOLLAND Original Parts for repair.
Installation and use of non original
SAF-HOLLAND parts could result in
FAILUREOFTHECOUPLINGDEVICESWHICH
IFNOTAVOIDEDCOULDRESULTINDEATHOR
serious injury.
SAF-HOLLAND recommends that trailer and dolly
manufacturers, distributors, and users be familiar with
APPLICABLENATIONALSTATEANDLOCALREGULATIONSGOVERNING
COUPLINGSYSTEMSANDSAFETYDEVICESSUCHASSAFETYCHAINS
Within the United States, the following is a partial list of
sources for regulations and information pertaining to trailer
TOWING
s .ATIONAL(IGHWAY4RAFFIC3AFETY!DMINISTRATION.(43!n
Federal Motor Carrier Safety Standards and Regulations
s .ATIONAL!SSOCIATIONOF4RAILER-ANUFACTURERS.!4-
s 4RAILER3AFETY)NDUSTRY#OALITION43)#
s 3OCIETYOF!UTOMOTIVE%NGINEERS3!%$ESIGNAND4EST
Standards
s !MERICAN4RUCKING!SSOCIATION!4!n4ECHNOLOGY
Maintenance Council (TMC) Recommended Practices
s 4RUCK4RAILER-ANUFACTURERS!SSOCIATION44-!
Recommended coupling and uncoupling procedures are also
AVAILABLEFROMSEVERALOFTHEABOVELISTEDSOURCES
Warranty
0RODUCTSINTHISCATALOGARECOVEREDBY3!&(/,,!.$S
Commercial Warranty for Coupling Products. For North
America, this is a two-year parts and labor warranty. For other
countries or regions, refer to the appropriate coupling products
WARRANTYAVAILABLEONOURWEBSITE
61
Coupling System Selection
Coupling System Selection
Gross Trailer Weight (GTW)
GTW is the weight of an empty trailer plus the weight of its
maximum payload. This is shown as Gross Vehicle Weight
Rating (GVWR) as specified by the trailer manufacturer and is
shown on the manufacturer’s identification label located on the
trailer. If the label is missing or unreadable, contact the trailer
manufacturer for GVWR information.
The type of load, density of the load, and placement of the
LOADINRELATIONTOTHETRAILERAXLESWILLHAVEASIGNIFICANT
EFFECTONTHEVERTICALLOADATTHETRAILERTONGUE%XCESSIVE
VERTICALLOADSAPPROACHINGOFGROSSTRAILERWEIGHTCAN
RESULTINACCELERATEDWEARANDOVERLOADINGOFTHECOUPLING
DEVICES
Payload Changes Vertical Load
1,000 POUNDS
Always use the GVWR as supplied by the trailer manufacturer as
the ‘minimum’ gross trailer weight that the coupling system is to
be selected for.
)FVARIOUSSIZETRAILERSWILLBETOWEDTHETRAILERWITHTHELARGEST
GVWR must be used to determine the capacity requirements of
THECOUPLINGDEVICE
)FATOWVEHICLEWILLPULLMULTIPLETRAILERSATTHESAMETIMEAS
with doubles, triples and road trains, the sum of the GVWRs
for all towed trailers must be used to determine the capacity
REQUIREMENTSOFTHECOUPLINGDEVICE
4,000 POUNDS
Maximum Vertical Load
Vertical load is the upward force exerted on the drawbar eye
of the trailer and the downward force exerted on the coupling
DEVICEOFTHETOWVEHICLE
Hinged Tongue Trailer
The tongue is hinged to the trailer so that the tongue will
NOTTRANSFERTHEVERTICALWEIGHTOFTHETRAILERORPAYLOAD
TOTHECOUPLINGDEVICES4HEVERTICALLOADIMPOSEDONA
COUPLINGDEVICEBYAHINGEDTONGUETRAILERISAPPROXIMATELY
one-half of the weight of the hinged tongue/drawbar
ASSEMBLYONLY7HEREVERTICALLOADONTHECOUPLINGDEVICEIS
limited due to a hinged tongue, the maximum gross trailer
weight rating for the drawbar/eye may be increased (see
drawbar product pages for specific ratings).
PIVOT POIN T
DRAWBAR
8,000 POUNDS
Drawbar Compatibility
The size of the drawbar eye (lunette) must be compatible with
THECOUPLINGDEVICEOFTHETOWVEHICLE4HISINCLUDESTHEINSIDE
diameter (I.D.) of the eye and the cross-section dimension(s) of
the eye. Proper eye selection will allow for adequate clearance
BETWEENTHEEYEANDITSMATINGCOMPONENTTOHELPPREVENT
binding between coupling components. If a trailer is to be pulled
BYMORETHANONETOWVEHICLECOMPATIBILITYSHOULDBECHECKED
WITHTHECOUPLINGDEVICESOFEACHTOWVEHICLE
Over-The-Road Locking Systems
Rigid Tongue Trailer
The tongue and trailer form a single rigid unit so that the
VERTICALLOADMEASUREDATTHEDRAWBAREYEINCLUDESTHE
WEIGHTOFTHETRAILERANDITSPAYLOAD4HEVERTICALLOADIS
generally recommended to be a minimum of 10% - 15%
of the maximum gross trailer weight.
SAF-HOLLAND recommends that all couplers and pintle
HOOKSUSEDINOVERTHEROADAPPLICATIONSBEEQUIPPEDWITH
both a primary lock and secondary lock. Holland FastLatch™
incorporates both the primary and secondary locks into a single
integrated latch system.
WEIGHT HERE
TRANSFERRED HERE
62
Operating Conditions/Cushioning Systems
Operating Conditions
Cushioning Systems
Off-Road / Rough Terrain Applications
(OLLANDCUSHIONINGSHOCKABSORPTIONSYSTEMSINCLUDE
Reduction in Rated Capacities
s Rubber Mount
For off-road and rough terrain applications, the rated
capacities (MGTW and Maximum Vertical Load) of the
COUPLINGDEVICESFORBOTHTHETOWANDTOWEDVEHICLES
should be reduced by a minimum of 25% to accommodate
the increase in dynamic loading.
%XAMPLEn!PINTLEHOOKRATEDATLBSKG
-'47ANDLBSKGMAXIMUMVERTICALLOAD
would, for off-road applications, be rated at 75,000 lbs.
(34,020 kg) MGTW and 15,000 lbs. (6,800 kg) Maximum
Vertical Load.
!BSORBSSHOCKLOADSFROMHARDCOUPLINGVEHICLELAUNCH
and braking (reference Holland products PH-990,
DB-1407-S, and DB-1407-SE).
PH-990ST71
DB-1407-S
Articulation
Maximizing the range of articulation between the drawbar
EYEOFTHETRAILERANDTHECOUPLINGDEVICEOFTHETOWVEHICLE
is critical for good off-road performance. Holland pintle
hooks are designed for maximum articulation with Holland
DRAWBARS/THERCONSIDERATIONSINCLUDE
s !SWIVELMOUNTCOUPLERPINTLEHOOKORSWIVELMOUNT
drawbar can further enhance articulation in offROADAPPLICATIONS4HESWIVELMOUNTFEATUREPROVIDES
ROTATIONTOHELPPREVENTBINDINGBETWEENTHEDRAWBAR
EYECOUPLERORPINTLEHOOK.OTEHOWEVERTHATYOU
SHOULDNEVERUSEASWIVELMOUNTCOUPLERPINTLEHOOK
WITHASWIVELMOUNTDRAWBAR4HETWOSWIVELMOUNT
COMPONENTSCOULDLEADTOOVERROTATIONOFTHECOUPLING
DEVICE
s )TISIMPORTANTTOCOORDINATETHESIZEOFTHEDRAWBAR
eye with the mating component of the coupler or pintle
hook. Proper sizing will allow for optimum articulation
OFTHECOUPLINGSYSTEMWHENDRIVINGOVERUNEVEN
terrain. Reference Drawbar Compatibility Chart on pages
nFORASSISTANCEINTHESELECTIONPROCESS
PH-775SL11 NoLube
s Steel Spring
!BSORBSSHOCKLOADSDURINGVEHICLELAUNCHAND
acceleration (reference Holland products PH-30SA and
PH-30SB).
PH-30SA41
s Pneumatic Snubber
&ORVEHICLESEQUIPPEDWITHAIRSYSTEMSASNUBBER
WITHFORCESUPPLIEDBYANAIRSERVICECHAMBERHELPSTO
minimize ‘free play’ or ‘slack’ between the drawbar eye
ANDCOUPLINGDEVICEASWELLASABSORBINGSHOCKLOADS
during deceleration and braking (Reference Holland
products PH-210, PH-300(R), PH-310, PH-400(H), PH410, PH-419, PH-550, and DB-1400AC).
PH-210
DB-1400AC
DB-610-30
63
Mounting Information
Mounting Information
Mounting Height
7HENMOUNTINGACOUPLINGDEVICEAHEIGHTSHOULDBESELECTED
THATRESULTSINTHECHASSISOFTHETOWEDVEHICLEBEINGCLOSETO
LEVELWITHTHEGROUND!NOFFSETINMOUNTINGHEIGHTWILLCREATE
VERTICALANDHORIZONTALDISPLACEMENTOFTHEDRAWBARINRELATION
TOTHEMATINGCOMPONENTOFTHECOUPLINGDEVICE4HISMISMATCH
INHEIGHTWILLLEADTOACCELERATEDWEARANDCHANGESINVEHICLE
handling.
Improper Mounting Height
(causing excessive vertical and horizontal movement)
Mounting Surface
4HEMOUNTINGSURFACEFORACOUPLINGDEVICEMUSTBEFLATANDOF
adequate strength to support the rated capacity of the coupling
DEVICE)TMUSTHAVESUFFICIENTVERTICALLOADANDHORIZONTALLOAD
capability to comply with the requirements of SAE J847.
Mounting Hardware
All mounting hardware must be new ASTM Grade 8 bolts with
hardened steel washers and ASTM Grade C locknuts. Bolts
SHOULDBEOFSUFFICIENTLENGTHTOPROVIDEAMINIMUMOFTWO
full threads beyond the end of the nut under recommended
torque.
Proper Fastener Selection
Bolt head designation
for Grade 8 is 6 equally
spaced bars as show.
A minimum of 2 full
threads must be exposed
after proper torquing.
4ODEVELOPTHEFULLRATEDCAPACITYOFACOUPLINGDEVICEALL
required mounting fasteners must be present with proper
ANDEQUALTORQUEAPPLIEDTOEACHFASTENER4ORQUEVALUESAND
procedures should follow SAE J429 and are stated in the Owner’s
Manual shipped with each Holland coupling product. This
INFORMATIONISALSOAVAILABLEONLINEATTHE3!&(/,,!.$WEBSITE
64
Glossary
ASTM
Off-Road
American Society for Testing and Materials
2EFERSTOTERRAINONWHICHATOWINGTOWEDVEHICLEWILLOPERATE
which is ungraded, rough or undulating, with no maintained
TRAVELSURFACEGENERALLYCONSIDEREDTONOTBEPARTOFTHEPUBLIC
road system. Examples include agricultural fields, construction
sites, utility right-of-way, temporary logging roads, and what is
commonly referenced as ‘two-track’ roads.
Converter Dolly / Dolly
An auxiliary axle chassis consisting of a frame with single or
tandem axles, suspension, fifth wheel, and tongue with drawbar.
!DOLLYISUSEDTOCONVERTASEMITRAILERINTOAFULLTRAILER
‘A’ Dolly
Over-The-Road
!CONVERTERDOLLYWITHASINGLEPOINTOF
ATTACHMENTTOTHETOWINGVEHICLETHE
point being located along the centerline
of the dolly.
2EFERSTOTERRAINONWHICHATOWINGTOWEDVEHICLEWILL
OPERATEWHICHISPAVEDORFEATURESAGRADEDSURFACEGENERALLY
considered to part of the public road system.
“A” DOLLY
‘C’ Dolly
SAE
!CONVERTERDOLLYWITHTWOPOINTSOFATTACHMENTTOTHE
TOWINGVEHICLETHEPOINTSBEINGEQUALLYSPACEDALONGTHE
centerline of the dolly.
3OCIETYOF!UTOMOTIVE%NGINEERS
Drawbar
The structural member of the trailer tongue that attaches the
drawbar eye or lunette to the trailer tongue. Drawbars are
TYPICALLYBOLTONORWELDONANDAREAVAILABLEASRIGIDMOUNTOR
SWIVELMOUNT
Drawbar Eye / Lunette
!ROUND@DOUGHNUTSHAPEDDEVICEUSEDTOCOUPLEATRAILER
TONGUETOATOWINGVEHICLEEQUIPPEDWITHACOUPLINGDEVICE
such as a pintle hook or coupler.
Full Trailer
J429 - Mechanical and material requirements for externally
threaded fasteners
J847 - Trailer towbar eye and pintle hook/coupler
performance
Semi-trailer
A trailer, except pole trailer, so constructed that a substantial
PARTOFITSWEIGHTRESTSUPONORISCARRIEDBYANOTHERVEHICLEOR
CONVERTERDOLLY
Tare Weight / Unloaded Vehicle Weight (UVW)
4HETOTALWEIGHTOFAVEHICLEATTHEGROUNDINCLUDINGNORMAL
FLUIDSANDEQUIPMENTINACONDITIONTORECEIVEOCCUPANTSAND
payload.
A trailer equipped with two or more axles that support the
entire weight of the trailer. Full trailers typically feature a hinged
trailer tongue.
Trailer Tongue
Gross Trailer Weight (GTW) / Maximum Gross Trailer
Weight (MGTW)
Vertical Load / Maximum Vertical Load
The actual total weight measured at the ground of a fully
loaded trailer or multiple coupled trailers. Maximum Gross Trailer
Weight is the largest weight of both the trailer(s) and payload
THATCANSAFELYBETOWEDBYACOUPLINGDEVICE
The structural member of a trailer that connects to a towing
VEHICLE
The load or downward force measured at the drawbar located at
the coupling end of the trailer tongue. Maximum Vertical Load is
THEMANUFACTURERSRECOMMENDEDSTATICVERTICALLOADDOWNTHAT
CANBESAFELYAPPLIEDTOTHECOUPLINGDEVICE
Gross Vehicle Weight Rating (GVWR)
4HEVALUESPECIFIEDBYTHEMANUFACTURERASTHELOADEDMAXIMUM
WEIGHTOFASINGLEMOTORVEHICLEORTRAILER
Jackknife
/VERARTICULATIONBETWEENTHETOWINGANDTOWEDVEHICLES
(generally greater than 90 degrees) that results in binding at the
coupling connection.
Negative Vertical Load
The load as an upward
force measured at the
drawbar located at
the coupling end of
the trailer tongue. A
NEGATIVEVERTICALLOAD
typically results from the
payload being placed
behind the trailer axle
(see illustration).
PAYLOAD
Negative
Vertical
Load
PAYLOAD
Positive
Vertical
Load
65
66
67
68
They’re called “Original Parts” for a reason!
Why trust anything else?
FIFTH WHEELS
SUSPENSIONS
COUPLINGS
LANDING GEAR
LIFTGATES
Service parts for HOLLAND, SAF, NEWAY, and
former Binkley, Simplex, and TruckMaster Products.
SAF-HOLLAND Original Parts are the same quality components used in
the original component assembly. SAF-HOLLAND Original Parts are tested
and designed to provide maximum performance and durability. Will-fits,
look-alikes or, worse yet, counterfeit parts will only limit the performance
potential and could possibly void SAF-HOLLAND’s warranty.
Always be sure to spec SAF-HOLLAND Original Parts
when servicing your SAF-HOLLAND product.
SAF-HOLLAND USA, Inc.
888.396.6501 Fax 800.356.3929
SAF-HOLLAND Mexico
52.55.5362.8743 Fax 52.55.5362.8743
www.safholland.com
SAF-HOLLAND Canada Limited
519.537.3494 Fax 800.565.7753
Western Canada 604.574.7491 Fax 604.574.0244
XL-PH10397SG-en-US Rev B · 2012-02-07 · Amendments and errors reserved · © SAF-HOLLAND, Inc.
From fifth wheel rebuild kits to suspension bushing repair kits,

holland coupling products

Transcription

Similar documents

Green Series Medical Exam Lights

holland coupling products

classic service van for ford transit

MODEL LM 1 - Log Master Portable Saw Blade

Mount Pleasant Community Brochure

McFly egg - Total Flyfisher Magazine

Bikamper™

SG-40 and 50 Tool Insert page f

OUTDOOR EQUIPMENT RENTAL

GRUE TOUT-TERRAIN DE 1500 TONNES PRÈS DE LA CHUTE