For the BB5000 Portable Boring Machine BB5000 Facing

all 3.qxp
7/13/06
3:25 PM
Page 1
BB5000 Facing & Grooving Head Accessory
Dimensional Drawings, Ordering Information
BB5000 Facing and Grooving Head Accessory
Dimensions in inch (mm)
BB5000 Facing & Grooving Head Dimensions
(Front View, Standard Model)
FEATURES • TECHNICAL DATA
BB5000 Facing & Grooving Head Dimensions
(Front View, Standard Model)
For the BB5000 Portable
Boring Machine
Extend the versatility of your Climax
BB5000 Portable Boring System by
adding our combination Facing Head
& Grooving Tool. This popular
accessory is designed for easy set-up
and operation, and a high level of
accuracy and precision. The Facing
Head & Grooving Tool is perfect for
your boring procedures that also
require you to machine end flanges
which are truly flat and perpendicular
to your central bore axis, or which may
call for machining precision grooves to
accommodate O-rings, snap-rings or
special lubrication processes.
Easy, flexible, setup and
operation: The Facing Head &
Grooving Tool attaches directly to the
Climax BB5000 Boring Machine.
The assembly clamps securely to any
location along the boring bar for quick
and easy setup. You can mount this
tool to face either the front or rear side
of the work piece.
One setup for boring, facing and
grooving: The Facing Head &
Grooving Tool saves time and provides
an added assurance of accuracy and
alignment. By utilizing a single
machine mounting setup for all
machining operations, you’ll be
assured that your facing and grooving
procedures are square and perfectly
concentric to your central bore. Plus
inboard and outboard end faces can
be cut truly parallel to one another
utilizing just one boring machine
setup.
Change feed
rates on the
fly:
The Facing
Head &
Grooving
Tool has been
designed to allow you to
vary the feed rate without
having to stop the facing head
rotation, to get the job done fast.
Feed rate can be varied from 0.0 0.05 inches (0.0 - 1.3 mm) per
revolution. The Facing Head &
Grooving Tool is available in both a
standard model and in a specially
designed compact version for use
where operating space is limited.
Compact
model shown
Product Warranty: Climax warrants
that all new machines and accessories
are free of defects in materials and
workmanship for a period of one year
after delivery. Within the warranty
period, Climax will, at its option,
either repair or replace the defective
machine.
• Standard Model 36954
19 inches (483 mm)
Facing: ø2.5 - 19 inches (64 - 483 mm)
Grooving: ø4 - 19 inches (102 - 483 mm)
• Compact Model 36936
12 inches (305 mm)
Facing: ø 2.5 - 12 inches (64 - 305 mm)
Grooving: ø4 - 12 inches (102 - 305 mm)
• Tool Kits
Facing
36370
Grooving
35950
15º for snap rings
0º for “O” rings
Technical Information:
• Tool mounts any place on the bar.
• Includes facing and grooving tool
bits and dial indicator (uses standard
0.5 inch or 12 mm square tool bits).
• Shipping weight: 45 lbs. (20.4 Kg)
• Container dimensions: (L, W, H)
20 x 24 x 9 inches
(508 x 610 x 229 mm)
BB5000 Facing & Grooving Head Dimensions
(Front View, Compact Model)
BB5000 Facing & Grooving Head Dimensions
(Front View, Compact Model)
Call Climax for:
Rentals
With six locations in the USA, two in
Canada, one in Europe, and one in
Asia, you are never far away from a
Climax portable machine tool.
Special Projects
Climax has been solving complicated
on-site machining problems for our
customers since 1964.
Ordering Information
On-site Training
Need some refresher courses in
setting up and operating your
Climax machine tool?
Call us.
We’ll bring the solution to you.
BB5FG-1M0706
®
Portable Machine Tools, Inc.
B r i n g i n g
t h e
s o l u t i o n
t o
Corporate Headquarters
Climax Portable Machine Tools, Inc.
2712 E. Second Street
Newberg, Oregon 97132 USA
Worldwide Telephone: 503.538.2185
N. America Toll-Free: 800.333.8311
Fax: 503.538.7600
Email: info@cpmt.com
European Headquarters
Climax GmbH
Willi - Bleicher - Strasse 11
52353 Düren, Germany
Telephone: (+49) (0) 2421.9177.0
Fax: (+49) (0) 2421.9177.29
Email: info.de@cpmt.com
®
Portable Machine Tools, Inc.
www.cpmt.com
y o u .
Copyright © 2006 Climax Portable Machine Tools, Inc. All Rights Reserved.
all 3.qxp
7/13/06
3:25 PM
Page 1
BB5000 Facing & Grooving Head Accessory
Dimensional Drawings, Ordering Information
BB5000 Facing and Grooving Head Accessory
Dimensions in inch (mm)
BB5000 Facing & Grooving Head Dimensions
(Front View, Standard Model)
FEATURES • TECHNICAL DATA
BB5000 Facing & Grooving Head Dimensions
(Front View, Standard Model)
For the BB5000 Portable
Boring Machine
Extend the versatility of your Climax
BB5000 Portable Boring System by
adding our combination Facing Head
& Grooving Tool. This popular
accessory is designed for easy set-up
and operation, and a high level of
accuracy and precision. The Facing
Head & Grooving Tool is perfect for
your boring procedures that also
require you to machine end flanges
which are truly flat and perpendicular
to your central bore axis, or which may
call for machining precision grooves to
accommodate O-rings, snap-rings or
special lubrication processes.
Easy, flexible, setup and
operation: The Facing Head &
Grooving Tool attaches directly to the
Climax BB5000 Boring Machine.
The assembly clamps securely to any
location along the boring bar for quick
and easy setup. You can mount this
tool to face either the front or rear side
of the work piece.
One setup for boring, facing and
grooving: The Facing Head &
Grooving Tool saves time and provides
an added assurance of accuracy and
alignment. By utilizing a single
machine mounting setup for all
machining operations, you’ll be
assured that your facing and grooving
procedures are square and perfectly
concentric to your central bore. Plus
inboard and outboard end faces can
be cut truly parallel to one another
utilizing just one boring machine
setup.
Change feed
rates on the
fly:
The Facing
Head &
Grooving
Tool has been
designed to allow you to
vary the feed rate without
having to stop the facing head
rotation, to get the job done fast.
Feed rate can be varied from 0.0 0.05 inches (0.0 - 1.3 mm) per
revolution. The Facing Head &
Grooving Tool is available in both a
standard model and in a specially
designed compact version for use
where operating space is limited.
Compact
model shown
Product Warranty: Climax warrants
that all new machines and accessories
are free of defects in materials and
workmanship for a period of one year
after delivery. Within the warranty
period, Climax will, at its option,
either repair or replace the defective
machine.
• Standard Model 36954
19 inches (483 mm)
Facing: ø2.5 - 19 inches (64 - 483 mm)
Grooving: ø4 - 19 inches (102 - 483 mm)
• Compact Model 36936
12 inches (305 mm)
Facing: ø 2.5 - 12 inches (64 - 305 mm)
Grooving: ø4 - 12 inches (102 - 305 mm)
• Tool Kits
Facing
36370
Grooving
35950
15º for snap rings
0º for “O” rings
Technical Information:
• Tool mounts any place on the bar.
• Includes facing and grooving tool
bits and dial indicator (uses standard
0.5 inch or 12 mm square tool bits).
• Shipping weight: 45 lbs. (20.4 Kg)
• Container dimensions: (L, W, H)
20 x 24 x 9 inches
(508 x 610 x 229 mm)
BB5000 Facing & Grooving Head Dimensions
(Front View, Compact Model)
BB5000 Facing & Grooving Head Dimensions
(Front View, Compact Model)
Call Climax for:
Rentals
With six locations in the USA, two in
Canada, one in Europe, and one in
Asia, you are never far away from a
Climax portable machine tool.
Special Projects
Climax has been solving complicated
on-site machining problems for our
customers since 1964.
Ordering Information
On-site Training
Need some refresher courses in
setting up and operating your
Climax machine tool?
Call us.
We’ll bring the solution to you.
BB5FG-1M0706
®
Portable Machine Tools, Inc.
B r i n g i n g
t h e
s o l u t i o n
t o
Corporate Headquarters
Climax Portable Machine Tools, Inc.
2712 E. Second Street
Newberg, Oregon 97132 USA
Worldwide Telephone: 503.538.2185
N. America Toll-Free: 800.333.8311
Fax: 503.538.7600
Email: info@cpmt.com
European Headquarters
Climax GmbH
Willi - Bleicher - Strasse 11
52353 Düren, Germany
Telephone: (+49) (0) 2421.9177.0
Fax: (+49) (0) 2421.9177.29
Email: info.de@cpmt.com
®
Portable Machine Tools, Inc.
www.cpmt.com
y o u .
Copyright © 2006 Climax Portable Machine Tools, Inc. All Rights Reserved.