Toronto/Markham - Spectrum Dialogue

Transcription

SPECTRUM dialogue
Techno-Clinical Day
TORONTO
October 12, 2012
Hilton Suites Conference Centre & Spa (Toronto / Markham)
8500 Warden Ave, Markham, ON L6G 1A5
Speakers
Dr. Allen Aptekar
Dr. Mark Lin
Dr. Murray Arlin
Andrew Long, RDT
Domenico Cascione, MDT
Richard Napolitano, CDT
Jim Collis, CDT
Peter Pizzi, MDT
Roland P. Estrabillo, DDS
Dr. William Rodriguez
Dr. Joseph Fava
Fadi Touma, RDT, CDT
Roger R. Johansen, CDT
Carlo Zanon, DD
Luke S. Kahng, CDT
www.spectrum-day.com
Palmeri Publishing Inc.
905.489.1970 1.866.581.8949
SD-Day-Toronto2012-Brochure-rev.indd 1
9/13/2012 9:19:48 AM
PROGRAM INFORMATION
FRIDAY, OCTOBER 12, 2012
CLINICAL PROGRAM
e
Woodbin
Ave.
Warden
Registration: 8:30am
ADIA Digital Panel Discussion: 9:00am - 11:00am
Lectures: 10:30am - 4:00pm
TECHNICAL PROGRAM
Ave.
Registration: 12:30pm
Lectures: 1:00pm - 8:00pm
Hwy
N
7
DENTURIST PROGRAM
4
Hwy 40
Registration: 1:30pm
Lectures: 2:00pm - 8:00pm
7
Hwy 40
TRADESHOW
12:30pm - 8:30pm
ANNUAL COCKTAIL RECEPTION
8:00pm - 9:00pm
SPECTRUM dialogue Techno-Clinical Day TORONTO
Location and Accommodation
Hilton Suites Conference Centre & Spa (Toronto/Markham)
Tel: 905.470.8500
Suite: $139.00 / night
Booked for Spectrum Day
To make a reservation, please visit:
http://www3.hilton.com/en/hotels/ontario/hilton-suites-toronto-markham-conference-centre-and-spa-YYZAPHF/index.html
If you are making reservations over the phone please indicate that you are booking under “Spectrum Day” in October.
2
9/13/2012 9:20:12 AM
SPECTRUM DIALOGUE TECHNO-CLINICAL DAY TORONTO
PROGRAM @ A GLANCE
CLINICAL
TIME
SPEAKER
TOPIC
SPONSOR
9:00am - 11:00am
Duane Baluke, RDT, Corey Lewis,
Stephan Danco, Jennifer Dibbens,
Dr. Mohamed Ellaham, Randy Popitcoe
Aesthethic Design & Implant Academy - Digital Panel Discussion
Baluke Dental Studios, Donald Cousens 1
Exan Mercedes,
Straumann, Velscope
10:30am - 11:30am
Dr. Allen Aptekar
Implant Surgery for the General Practitioner - Treatment Planning
Implant Solutions
11:00am - 11:30am Break
11:30am - 12:30pm
Dr. Murray Arlin
ROOM
Donald Cousens 2
Donald Cousens 1
Advances, Trends and Controversies in Periodontics and Implant Dentistry
ADIA
12:30pm - 1:30pm Exhibit Hall Opens - Lunch for Purchase
Donald Cousins 1
Donald Cousens 345
1:30pm - 2:30pm
Enhancing Your Dental Practice With Lasers - See How Lasers Work In
Your Daily Practice
Biolase
Donald Cousens 2
1:30pm - 2:30pm
Dr. Joseph Fava
ALL THAT GLITTERS AIN’T GOLD. The Era of Zirconia.
Straumann
Donald Cousins 1
2:30pm - 3:00pm
Exhibit Hall - Break
3:00pm - 4:00pm
Dr. Mark Lin
Donald Cousens 345
All-On-4 Treatment Concept
Nobel Biocare
Donald Cousins 1
SPONSOR
ROOM
TECHNICAL
TIME
SPEAKER
TOPIC
12:30pm - 1:30pm Exhibit Hall Opens - Lunch for Purchase
Donald Cousens 345
1:00pm - 2:00pm
Simplified Restorative Options for Predictable Results with Dental Implants
Dentsply Implants
Violet/Orchard
2:00pm - 3:00pm
Roger R. Johansen, CDT
The Ultimate Solution for Strength and Beauty
3M ESPE
Violet/Orchard
3:00pm - 3:30pm
3:30pm - 4:30pm
Richard Napolitano, CDT
Digital Advances for the Dental Laboratory
Biomet 3i
Violet/Orchard
4:30pm - 5:30pm
Luke S. Kahng, CDT
Achieve More Esthetic Shade Matching with CAD/CAM Design
GC America
Violet/Orchard
5:30pm - 6:00pm
Donald Cousens 345
Donald Cousens 345
6:00pm - 7:00pm
Peter Pizzi, MDT
Esthetic Realities for Today and Tomorrow
ADTO
Violet/Orchard
7:00pm - 8:00pm
Domenico Cascione MDT
Tissue Management Criteria on the Implant Restoration with a Novel
Approach for Non-Invasive Pontic Site Development
Core3d Centres/
Synca
Violet/Orchard
8:00pm - 9:00pm
Exhibit Hall - Cocktail Reception
Donald Cousens 345
DENTURIST
TIME
SPEAKER
TOPIC
SPONSOR
ROOM
2:00pm - 3:00pm
Carlo Zanon, DD
Part 1: “Genios” Teeth: A New Line Worth Looking At
Part 2: An Introduction to Snoring & Sleep Apnea
Dentsply Canada
Donald Cousens 2
3:00pm - 4:00pm
Andrew Long, RDT
Economical Alternatives to Milled Implant Bars
Nordenta
Donald Cousens 2
4:00pm - 4:30pm
4:30pm - 5:30pm
Dr. Mark Lin
Implant Overdenture Treatment Options and Case Presentation for
Patient Acceptance
Nobel Biocare
Donald Cousens 2
5:30pm - 6:30pm
Jim Collis, CDT
The UltraSuction™ Denture System, and the Reline & Revitalize Alternative
OnCore
Donald Cousens 2
6:30pm - 7:00pm
7:00pm - 8:00pm
Roland P. Estrabillo, DDS
8:00pm - 9:00pm
Exhibit Hall - Cocktail Reception
Donald Cousens 345
Donald Cousens 345
Denturists - Explore your Hidden Gems
ADAM Centre
Donald Cousens 2
Donald Cousens 345
3
9/13/2012 9:20:30 AM
CLINICAL
Aesthetic Design & Implant Academy
Digital Panel Discussion
Intra-oral Scanning of Straumann Implants
with iTero System
Stephan Danco I Straumann
Digital Work Flow from Fixture Scan to Model Milling &
Lab Design with CAD/CAM Abutment Production
Jennifer Dibbens I Straumann
Paperless Office
Dr. Mohamed Ellaham I Exan Mercedes
How CAD/CAM Plays a Role in Lab Restorations
Duane Baluke, RDT and Corey Lewis I Baluke Dental Studios
Effective Oral Cancer Screening
Randy Popitcoe I Velscope
9:00am - 11:00am • Donald Cousens 1 • 2 points
ADIA
Implant Surgery for the General
Practitioner - Treatment Planning
•
•
•
•
•
•
Patient Identification • Diagnosis
Treatment Planning
• Force Factors
Contraindications
• Medical History Review
Single implants, i) mandible ii) maxilla
Multiple implants –fixed prostho., i) mandible ii) maxilla
Removable implant retained prosthetics, i) mandible ii) maxilla
11:00am - 11:30am
10:30am - 11:30am • Donald Cousens 2 • 1 point
Implant Solutions
4
Donald Cousens 1
BREAK
Advances, Trends and Controversies in
Periodontics and Implant Dentistry
Dental professionals are inundated with numerous publications and as well
with commercial salespersons. It is very difficult for the private practitioner to
do thorough research and to differentiate what are miracle materials or simply
mighty marketing. This seminar will highlight some of the current concepts in
Periodontics and Implant Dentistry and will address some of the controversies
that plague our industry.
Murray Arlin, D.D.S., dip Perio, F.R.C.D.(C)
received his D.D.S. from McGill University in 1977. After a
1 year Residency in General Dentistry at the Jewish General
Hospital in Montreal, he began his Post-Graduate Program in
Periodontics at the University of Toronto, graduating in 1980.
Dr. Arlin received his Membership and Fellowship in the
Royal College of Dentists of Canada in 1981 and 1983 respectively. He has
taught at the Undergraduate and Periodontal Post-Graduate departments at
the University of Toronto. Dr. Arlin received his training in Implant Dentistry
initially in 1985 and since then has been actively involved in Continuing
Education. He has placed and documented over 10,000 implants to date. He
has lectured internationally and has authored many articles on Periodontics
and Implant Dentistry.
11:30am - 12:30pm • Donald Cousens 1 • 1 point
12:30pm - 1:30pm
•
Donald Cousens 345
EXHIBIT HALL OPENS
Dr. Allen Aptekar
studied at the University of Toronto,
earning his Bachelors of Science degree in Biology. He received
his Doctor of Dental Medicine degree with distinction at the
University of Saskatchewan College of Dentistry. He then
completed a one year hospital residency at Sunnybrook Health
Sciences Center and the University of Toronto. He has authored
and coauthored several articles in refereed professional dental journals, and is a
lecturer in dental implant procedures for dentists and denturists. He practices in the
Greater Toronto Area, with a special interest and focus on dental implantology.
•
LUNCH FOR PURCHASE
Enhancing Your Dental Practice with
Lasers - See How Lasers Work in Your
Daily Practice
•
•
•
•
•
Brief History of Lasers
Short info on Laser Physics.
Indications for Laser
Photos and Videos of cases using the Laser.
Return on investment. IS it worth having a laser?
9/13/2012 9:20:44 AM
is the principal dentist at
Dr. William Rodriguez Dentistry Professional Corporation in
Mississauga, Ontario. He graduated from the University of
the East, Manila, Philippines in 1980 and the National Dental
Examining Board, Ontario, Canada in 1995. He is fluent in
English, Tagalog, Cebuano, and Ilonggo.
1:30pm- 2:30pm • Donald Cousens 2 • 1 point
Biolase
ALL THAT GLITTERS AIN’T GOLD. The Era
of Zirconia.
Designed for clinicians and dental technicians who want to provide their
patients/customers with zirconia based restorative options. This course
provides an excellent foundation for growing your “metal free” practice or
laboratory. Restorative solutions ranging from single-unit, multiple-unit, and
full arch restorations will be discussed. Custom CAD/CAM abutments will be
compared to commercially available “stock” zirconia abutments. To maximize
aesthetic outcome layered vs. monolithic zirconia restorations will be discussed.
The limitations of zirconia based restorations will be examined to help achieve
predictability in its usage.
Learning Objectives:
•
•
•
•
•
•
What is zirconia?
The unique material properties of zirconia
Advantages of zirconia based restorations
Case selection and lab communication
Advantages of full contoured monolithic zirconia vs. layered zirconia copings
Limitations of zirconia based CAD/CAM
Dr. Joseph Fava
completed 2 years of an honours
degree in Biology/Psychology prior to being accepted to
the Faculty of Dentistry at the University of Toronto. He
practiced as a general dentist for 10 years before returning
to complete a specialty program at the University of Toronto
in Prosthodontics and a MSc. focused on the topic of Dental
Implants in the Aesthetic Zone. He currently maintains a private Prosthodontic
practice with emphasis and focus on aesthetic and implant dentistry in the
Yorkville area in Toronto. He is a distinguished Kois Mentor and Co-Director
of the Mini-Residency in Implant Dentistry continuing education course at the
University of Toronto.
All-On-4 Treatment Concept
The “All-On-4” treatment concept for the full arch edentulous rehabilitation
can provide simplified, predictable, aesthetic, fixed and immediate functional
teeth in 1 day.
The advantages of the “All-On-4” concept will usually require fewer implants,
minimal morbidity, avoid the need for extensive grafting, less financial cost,
potential immediate temporization with same day fixed teeth, predictable
esthetics and extremely high patient satisfaction and acceptance.
This course will address the clinical skills required to achieve optimal success
with the ‘All-On-4” treatment concept. A step by step evaluation of all
parameters will be addressed with comprehensive hands on practical exercises
with the models provided. The implementation of the “All-On-4” treatment
concept will require several parameters to be covered in detail as follows:
• Systematic pretreatment evaluation and patient selection criteria
• Surgical parameters for number (4-6) and location of implants to achieve
initial stability for the maxillary and mandibular arches
• Immediate loading consideration and protocol
• Step by step review for the conversion technique from the complete dentures
to the screw retained immediate provisional
• Final fixed prosthetic parameters for optimal esthetics and functional
occlusion
Dr. Mark Lin practiced general dentistry for 13 years
before completing his post graduate training in the specialty
of Prosthodontics at the University of Toronto. He currently
holds the title as “Assistant Professor” at the faculty of
dentistry, discipline of Prosthodontics at the University of
Toronto. He maintains a full time specialty practice as a
Prosthodontist at Dr. Mark Lin Prosthodontic Center with focus on full mouth
reconstructions, dental implant surgery and implant prosthetics. He is a Fellow
and Diplomate with the I.C.O.I. He is an Associate Fellow and Fellow with the
A.A.I.D. He is also a graduate and Fellow with the Misch Implant Institute.
Finally, he is a Diplomate with the A.B.O.I., a designation that is earned by
less than 40 dentists or specialists in Canada. He is a Fellow and serves as
an Examiner with the Royal College of Dentists of Canada in the specialty of
Prosthodontics. Over the past 10 years, he has given more than 200 lectures
at various different professional and scientific meetings in Canada, U.S.,
Taiwan, Germany, India, Iran and China.
3:00pm - 4:00pm • Donald Cousens 1 • 1 point
Nobel Biocare
1:30pm - 2:30pm • Donald Cousins 1 • 1 point
Straumann
2:30pm - 3:00pm
•
Donald Cousens 345
EXHIBIT HALL BREAK
5
9/13/2012 9:20:58 AM
TECHNICAL
Simplified Restorative Options for
Predictable Results with Dental Implants
• Recognize the options available for the replacement of a single tooth
predictably and esthetically.
• Become familiar with options for implant-supported restorations.
• Understand the rationale for abutment selection.
3:00pm - 3:30pm
•
Donald Cousens 345
EXHIBIT HALL BREAK
Digital Advances for the Dental Laboratory
worked in a prosthodontic
specialty office from 1994 to 2001. In 1998, Mr. Touma
started his own specialty laboratory focusing on full mouth
reconstruction, implants and cosmetic dentistry. He has
extensive implant knowledge and experience with most implant
systems. Mr. Touma holds an American certification in addition
to his Canadian registration. He is currently the Dentsply Implants District Sales
Manager for laboratories for the Eastern region of Canada.
Incorporating CAD/CAM Technology into Today’s Dental Laboratory:
1:00pm - 2:00pm • Violet/Orchard • 1 point
Richard Napolitano, CDT is a graduate of Providence
College, Providence, Rhode Island, and Durham Technical
Institute, Durham, North Carolina. He is a national lecturer
on all aspects of dental laboratory technology, treatment
planning, implantology and dental techniques, and has been
involved in study clubs throughout Southern New England.
Mr. Napolitano is an allied member of the College of Prosthodontists and
the owner and CEO of Precision Craft Dental Laboratory in Providence,
Rhode Island.
Dentsply Implants
The Ultimate Solution for Strength
and Beauty
What do you get when you introduce 3M ESPE’s unique nanotechnology into
a CAD/CAM block? The ultimate solution for beautifully polished, fractureresistant, wear-resistant, natural-looking restorations. Roger Johansen,
Professional Relations Manager at 3M ESPE, will introduce Lava™ Ultimate
made from a new class of material, Resin Nano Ceramics. This new block
material, in addition to being resilient and incredibly durable and shock
absorbent, comes with an industry-leading 10-year warranty. In addition, Roger
will present exciting updates on Lava Zirconia.
Roger R. Johansen, CDT is the Professional Relations
Manager for 3M ESPE Digital Oral Care Products and Implants.
He has worked with 3M since 2005 coordinating beta testing
programs for new product launches and customer new product
training and education programs. He is a Certified Dental
Technician with over 20 years of experience in the field of dentistry.
Roger opened his own laboratory in Colorado in 1997, specializing in crown and
bridge utilizing CAD/CAM technology. In 2003-2005, he served as President of the
Colorado Dental Laboratory Association and on the Colorado Dental Association’s
Board of Trustees. During this time he worked with the state legislature and local
government agencies to write the Colorado Dental Practice Legislation and to
develop tax strategies to benefit dental prosthetic manufacturing businesses.
3M ESPE
6
•
•
•
•
•
•
Understanding the basics of Dental CAD/CAM
How to incorporate a CAD/CAM system into your lab workflow
Understanding what products your CAD/CAM System can create
Profitability! Getting a hold of the cost of CAD/CAM
Avoiding the unexpected: upkeep and ancillary considerations
Case studies incorporating CAD/CAM restorations
Biomet 3i
Achieve More Esthetic Shade Matching
with CAD/CAM Design
All dental professionals have at one time or another experienced frustration
with matching natural dentition. This course is created to give you guidelines for
systematically determining opacity and translucency so that your restorations
will closely mimic natural teeth.
Also covered will be All on 4/Ceramic vs. All on 4/Denture cases. When is the
best time to use each?
Learning Objectives:
• Learn to precisely match natural dentition: step by step
• Choose the right material based on patient’s color for the best possible match
• Become familiar with how to build your case from a neutral color to one that
perfectly mimics natural teeth
• Analysis: traditional shade tabs. Why do they not match your patient’s teeth?
• Discuss and understand the various hybrid bars and attachments
9/13/2012 9:22:45 AM
Luke S. Kahng, CDT is the owner of LSK121 Oral
Prosthetics, a dental laboratory in Naperville, Illinois. In addition
to being a board member for several dental publications, he has
published more than 100 articles with major dental journals.
He also lectures internationally, offering hands-on seminars
to dental technicians and clinicians alike. The first and second
editions of his highly successful Chairside Shade Selection Guide were launched
in 2009 and 2010, with international sales worldwide. The third edition, produced
in 2012, encompasses the same concept but as a ceramic shade tab. Hand-made,
the shade tabs are grouped according to natural dentition as dictated by the aging
process and sold in sets of twenty as: 3.0 (Young, Cosmetic), 4.0 (Middle Years),
5.0 (Later Years), 6.0 (Molars, Premolars and Canines) and 7.0 (Surface Texture,
Tissue Color and After Prep Color), for clinicians and technicians alike. He is the
author of four hardback books: Anatomy from Nature, The Esthetic Guide Book,
Smile Selection + CS³ Clinical Cases and the Kaleidoscope Wax-up Book.
GC America
5:30pm - 6:00pm
•
Donald Cousens 345
EXHIBIT HALL BREAK
Esthetic Realities for Today and Tomorrow
What will separate us more then ever before in the years to come will be our
talent level and ability to understand the clinical side of dentistry. This course
will focus on the “Team Concept” of restorative dentistry and the importance
of the technicians ability to effectively control the esthetic outcome. Under
the best of circumstances the transfer of information between the dentist and
technician for the fabrication of restorations is difficult and challenging. Our
educated patients and the advancement of materials has created a need for us
to didactically move through the diagnostic process including biomechanically,
functionally, periodontally and esthetically. This program will present a rational
methodology to help eliminate the frustrations often encountered during this
endeavor and discuss the future relationship that will prevail in the years to
come. With the advent of newer technologies such as photographic, video
and CAD/CAM, our role in the communication process through preoperative
mounted casts, the diagnostic wax up, preparation guides, and the importance
of photography as an aid for ceramic builds and color communication will still
be a value to the dental community.
•
•
•
•
•
Case management
Diagnostic communication
Preparation guided Ceramic layering and contours
The use on new technologies
The importance of photographic communication and perception
Peter Pizzi CDT, MDT, F.N.G.S. has found an easy
transition into the lecture/clinician circuit as a teacher of
dental technology for 12 years. His personal appreciation
and expertise on all phases of crown and bridge, porcelain,
implantology, muscle function and mandibular physiology
have made him a source of knowledge and motivation for
his peers to draw from. A technician since 1984 and a business owner and
manager of Pizzi Dental Studio Inc. A member of the ICOC (International
Congress of Oral Implantology) Board member of ASMDT (Association of
Master Dental Technicians) Teacher and educator in Master Dental Technician
Program (New York University) Member of the AACD (American Academy of
Cosmetic Dentistry) Technical Fellow of the NGS (Northeastern Gnathalogical
Society) Educator in the NYU School of Dentistry Executive Board Member
of the NGS Educator at NYU School of Dentistry Editorial Board IDT {Aegis
Dental Magazine] Peter has lectured to doctors and technicians throughout the
United States, Europe and Asia on several different topics. He also continually
studies with some of the world’s top speakers and clinicians.
ADTO
Tissue Management Criteria on the
Implant Restoration with a Novel
Approach for Non-Invasive Pontic Site
Development
The objective of this lecture is to present a systematic approach based on the
technician’s expertise in order to obtain predictable results on the implant
challenging cases. Adopting temporary restoration as an objective tool using
CAD/CAM technology with different materials:
• Chromo/cobalt alloy and porcelain build up technique
• Titanium with individual crowns cemented and pink porcelain or pink
composite.
• A traditional technique will be demonstrated using porcelain fused to
metal and pink porcelain.
Domenico Cascione MDT, BS
obtained his
primary education in Bari (Italy), where he was also certified
as a Dental Technologist (CDT) in 1985. From 1991 to 2004
he carried out metallurgy research becoming a specialist
in dental metallurgy. From 1986 to 2004 he was the owner
and Director of a Dental Laboratory in Bari (Italy). He
specialized in metallurgy, implant work and complex esthetic rehabilitation.
Since January 2005, he became Research Associate and Program Director
of the Advanced Training for Dental Technology at the Center for Dental
Technology, the University of Southern California School of Dentistry. He
was a winner of the 2007 Judson C. Hichey Award in the research category
in the Journal of Prosthetic Dentistry. He is author and co-author of several
articles in the literature.
Core3d Centres/Synca
8:00pm - 9:00pm
•
Donald Cousens 345
EXHIBIT HALL COCKTAIL RECEPTION
7
9/17/2012 12:20:50 PM
DENTURIST
Part 1: “Genios” Teeth: A New Line Worth
Looking At • Part 2: An Introduction to
Snoring & Sleep Apnea
both his fellowship and his masters with the ICOI . He is also a member of the
AACD, working towards his accreditation, while running his own boutique
dental lab in the heart of Niagara’s wine region.
Part 1 of this 2 part lecture will highlight the many benefits of incorporating
premium teeth into the Denturist, Dentist or laboratory practice. Highlighted is
the “Genios” line of artificial teeth by Dentsply.
Nordenta
A draw for a Genios mould guide will take place at the end of the seminar.
Part 2. An introduction to snoring and sleep Apnea and how oral appliances are
treating these conditions.
Carlo Zanon, DD started his career as a denturist in
1980 and presently operates two denture and anti-snoring
clinics. He is licensed to practice in Canada and the United
States. He has authored and published numerous articles
and is presently the editor-in-chief of “Spectrum Denturism”
magazine, an international Denturist publication. He is a
member of the Denturist Association of Canada, Denturist Association of
Ontario, Maine Denturist Association, National Denturist Association, and
the International Federation of Denturists. He is a Fellow of the Canadian
Academy of Denturists and an Honourable member of the Brotherhood of
Sterkenburgers. He has taught courses worldwide. He has received numerous
awards for his efforts. He continues to update his knowledge by studying,
teaching, lecturing and taking courses throughout the year.
Dentsply Canada
Economical Alternatives to Milled
Implant Bars
The Seeger is an innovative, affordable bar design from Rhein83 which
utilizes the Equator attachment as its retentive element. It eliminates the
need for milling while still achieving accuracy of fit and strength. Perfect for
the small lab or denturist who is looking for a cost-saving, patient-friendly
alternative to milled bars. Larger labs will appreciate having an economical
alternative to offer patients who require a lower price point. The Seeger puts
design control back in the hands of the technician.
Andrew Long, RDT, MICOI, ABIST
has been in
the Dental Industry since 1976, and has spent time working
in England, Germany and Canada. He has completed the
Dawson Centre’s Occlusion and Function Program and has
trained with the Millenium Aesthetics Program. He has
been working with implants since the early eighties and
recognizing that implants would become an ever growing part of our industry,
he educated himself whenever the opportunity arose. Recently he received
8
4:00pm - 4:30pm
•
Donald Cousens 345
EXHIBIT HALL BREAK
Implant Overdenture Treatment Options and
Case Presentation for Patient Acceptance
There are various implant overdenture treatment modalities utilizing different
attachments, bars, removable and fixed options. Each treatment option offers
both advantages and disadvantages to the clinician and patients. All the
treatment options can be overwhelming and confusing when presented to our
patients especially when dealing with wide range of professional fees. This
presentation will review in detail all implant overdenture treatment modalities
and provide a simple to understand flow chart to be utilized during our case
presentations for our patients. Factors and parameters that influence case
presentations and patient acceptance will also be covered to improve the rate
of acceptance for the practicing denturist.
Dr. Mark Lin practiced general dentistry for 13 years
before completing his post graduate training in the specialty
of Prosthodontics at the University of Toronto. He currently
holds the title as “Assistant Professor” at the faculty of
dentistry, discipline of Prosthodontics at the University
of Toronto. He maintains a full time specialty practice as
a Prosthodontist at Dr. Mark Lin Prosthodontic Center with focus on full
mouth reconstructions, dental implant surgery and implant prosthetics. He
is a Fellow and Diplomate with the I.C.O.I. He is an Associate Fellow and
Fellow with the A.A.I.D. He is also a graduate and Fellow with the Misch
Implant Institute. Finally, he is a Diplomate with the A.B.O.I., a designation
that is earned by less than 40 dentists or specialists in Canada. He is a Fellow
and serves as an Examiner with the Royal College of Dentists of Canada in
the specialty of Prosthodontics. Over the past 10 years, he has given more
than 200 lectures at various different professional and scientific meetings in
Canada, U.S., Taiwan, Germany, India, Iran and China.
Nobel Biocare
9/13/2012 9:23:07 AM
The UltraSuction™ Denture System, and
the Reline and Revitalize Alternative
This unique course will explore two different subjects. First, we will discuss
the UltraSuction™ Denture System from OnCore, a patented innovative
system that is comprised of one-way air valves that are placed on either
side of the linguals of upper or lower dentures. These valves connect to a
chamber that creates suction around the entire arch. The system creates
enhanced retention of the denture base to the tissue and improved comfort
to the patient. Then, we will discuss a technique for completely revitalizing
a patient’s existing denture as a less costly, but esthetically pleasing
alternative to replacing the denture. We will explore cutting-edge techniques
for naturalizing the denture base and denture teeth using modern light cure
composites. The ultimate objective is an existing appliance that has been not
only been restored but significantly enhanced.
Jim Collis, CDT
has owned and operated Collis
Prosthodontic Laboratory since 1980. The lab specializes in
high quality removable prosthodontics and laser welding and
primarily serves a select clientele of dental offices in the north
and west suburbs of Chicago. Jim has also previously served
as an instructor in the Junior/Senior laboratory of Northwestern
University Dental School for ten years. In that capacity, he presented numerous
courses to the dental school students on prosthetics including: advanced
esthetics pertaining to removable prosthodontics, fixed work, and advanced
attachment and implant techniques. He has presented lectures and hands-on
clinics at various venues throughout the United States, Canada and Germany.
He is a consultant and lecturer for several companies in the industry. He has
been a Certified Dental Technician for over thirty years.
OnCore
Denturists - Explore your Hidden Gems
This introductory seminar will stimulate you on how you can tap into your
hidden gems. You will learn how improve your case presentations and
increase your treatment acceptance to implant supported prostheses. It will
not only increase your patient satisfaction but your patients will be promoting
your services to others and increase your bottom-line.
Roland P. Estrabillo, DDS is the founder of the TTHE
an acronym Team of Total reHab Experts in Dentistry. This
training facility for advanced learning was initially formed
because of Roland’s vision and desire to continuously push
the standard of the profession to the next level. He is a
graduate of University of Toronto faculty of dentistry in 1987.
He has had extensive training in the field of complete rehabilitative dentistry
under the guidance of some excellent dental gurus. His continuous pursuit of
knowledge has led him to people who became his teachers and mentors. A few
of his mentors include people such as John McCormack, Gordon Christensen,
Dex Yager, Omer Reed, Dick Barnes, Tony Robins, John Kanca, Ed Philips, Ray
Bartolloti, Paul Bass, Roger Levin, Ron Ball, Carl Misch. Arun Garg, and Joel
Bauer. His goal is to share his vision and transfer all knowledge and skills he
has gained over the years to as many practitioners throughout the world, so
that he may help them build a practice that they’ve always dreamt of and help
them realize, enjoy and experience the beauty of the profession of dentistry.
He provides extensive and proper training for all dental personnel including
dentists, hygienist, receptionists, assistants, laboratory technicians and all
other staff members that work in a dental office.
ADAM Centre
8:00pm - 9:00pm
6:30pm - 7:00pm
•
Donald Cousens 345
•
Donald Cousens 345
EXHIBIT HALL COCKTAIL RECEPTION
EXHIBIT HALL BREAK
PART OF THE PROCEEDS WILL BE DONATED TO
GEORGE BROWN COLLEGE DENTAL PROGRAM
ON BEHALF OF
9
9/13/2012 9:23:18 AM
THANK YOU TO OUR SPONSORS
Spectrum Day Toronto would like to express its appreciation to our loyal
sponsors for their ongoing support and generosity. Our sponsors allow us to
offer you a world class program of unprecedented value every year.
2012 SPONSORS
10
9/13/2012 9:23:30 AM
EDUCATION
LOOK FOR THESE EXCITING UPCOMING
EDUCATIONAL OPPORTUNITIES:
Aesthetic Design & Implant Academy
A Multidisciplinary Study Club for Dentists
www.adiacanada.com
Denturism Implant Study Club
A Multidisciplinary Study Club for Denturists
www.disccanada.ca
Dental Technology Academy
A Multidisciplinary Study Club for Dental Technologists and Technicians
www.dtacanada.com
(The exclusive education provider of the ADTO in the GTA)
Dentechnica du Québec
1 Day Continuing Education Trade Show Event
www.dentechnicaduquebec.com
2-Day Live Patient Hands-on Oral Surgery Clinical Session
Clinical Hands-on Oral Surgery Session for the GP
www.spectrumdialogue.com
Ortho Techniques Symposium
www.orthotechniques.net
SPECTRUM dialogue Techno-Clinical Day CHICAGO
www.spectrum-day.com
Women in Dentistry Symposium
www.womenindentistrysymposium.com
11
9/13/2012 9:23:44 AM
SPECTRUM dialogue
Techno-Clinical Day
OCTOBER 12, 2012
Hilton Suites Conference Centre & Spa (Toronto/Markham)
(Please complete sections A – C)
Fax Completed form to: 905.489.1971
Mail form to: SPECTRUM dialogue Techno-Clinical Day TORONTO
34 - 145 Royal Crest Court, Markham, ON, L3R 9Z4
•
Register Online: www.spectrum-day.com
Questions? Call: 905.489.1970
•
1.866.581.8949 • Email: events@palmeripublishing.com
A. Contact Information: (please print)
1) First Name:___________________________________ Last Name:_______________________________  RDT
 DDS
 DD
 DDS
 DD
 DDS
 DD
Company: ___________________________________________________________________________________________________
Address: ____________________________________________________________________________________________________
City: ___________________________________________________ Pro/State: ______________ Postal/Zip Code: _______________
Phone: _________________________________________________ Fax: _______________________________________________
Email: __________________________________________________________________________________________________________
B. I am a:
 Dentist
 Dental Assistant
 Hygienist
 Dental Technologist
 Technician
 Denturist
 Orthodontist
Other: Please specify: ___________________________________________________________________________________________
C. I am a Member of: (check all that apply)
 ADTO
 CACD
 CAED
 ODA
 ADIA
 DTA
 SADA
 OAGD
Other: Please specify: ___________________________________________________________________________________________
if you
N
O
I
S
S
I
M
FREE AD in advance!
r
registe .00 at the door)
($59
12
9/13/2012 9:23:54 AM

Toronto/Markham - Spectrum Dialogue

Transcription

Similar documents

2016 SFOpen Dance Camp

4th of july sendiks - Nehring`s Sendik`s Downer

Save 20% - Cisco Live

DIGITAL IMAGING - THE NEW STANDARD OF CARE

TLC-Dec15-Ronit-3

Adopt-a-thon and Fundraiser Event

SUNDAYS FROM 10:00AM

saturday, february 7, 2015

Your Local Club! - Praxis Creative Art

2016 Winter Art SAlon