Spectrum Day Toronto 2014 - program2 .indd

Transcription

TORONTO
OCTOBER 24, 2014
SPECTRUM
dialogue
Free Admission
(Free Parking)
Techno-Clinical Day
TORONTO
Location: Hilton Suites Hotel & Spa (Toronto/Markham),
8500 Warden Ave, Markham,
ON L6G 1A5
October 24, 2014
Hilton Suites Conference Centre & Spa (Toronto/Markham) 8500 Warden Ave, Markham, ON L6G 1A5
Clinical Program
Registration: 8:00am
Lectures: 8:30am–1:45pm
Dental Technicians
Program
Registration:12:30pm
Lecture: 1:00pm–8:00pm
Speakers
Trade Show
11:30am–8:30pm
Dental Technicians
Women in Dentistry (WiDS)
Dr. Mark McCullough
Dr. Damon Adams
Business Program
Denturist
Program
Dr. Murray Arlin
Peter Pizzi, CDTRegistration: 9:00am
Registration: 1:30pm
Lecture: 9:30pm–3:00pm
Sandie
Baillargeon
Bernard
Robichaud
Lecture: 10am–1:00pm
Lecture: 2:00pm– 8:00pm
SD-Toronto- 2014.indd 4
Domenico Cascione, CDT
Shauneen Ryan
Trish Scrimshaw, RDT
Dr. Dana Colson
Dr. Jim Register
HylandOnline: www.spectrum-day.com
Claude Sieber, MDT
Ljepa Katanic,
Andy Sommer, RDT, DD, LVIF
Phone:RDT
905.489.1970 – 1.866.581.8949
Andrew Long,
RDT
Steven Touchie
events@palmeripublishing.com
Email:
Bill Marais, RDT
Fadi Touma, RDT
Dale Tucci
Gary Maxon, CDT
www.spectrum-day.com
Palmeri Publishing Inc.
905.489.1970 1.866.581.8949
2014-06-20 11:21 AM
PROGRAM INFORMATION
Friday October 24, 2014
Clinical Program
Lectures: 8:30am – 1:45pm
Digital Technicians Business Program
Lecture: 10am – 1:00pm
Technicial Program
Registration:12:30pm
Lecture: 1:00pm – 8:00pm
Denturist Program
Registration: 1:30pm
Women in Dentistry (WiDS)
Trade Show
11:30am – 8:00pm
Annual Cocktail Reception
8:00pm-9:00pm
Spectrum dialogue Techno-Clinical Day Toronto
Location and Accommodation
Hilton Suites Conference Centre & Spa (Toronto/Markham)
8500 Warden Ave, Markham, ON L6G 1A5
Suite: $ 139.00 / night
To make a reservation, please call 905.470.8500 or toll-free 800.593.9223 and indicate that you are booking
under ‘Spectrum Day Toronto’. The special rate will be available until September 22, 2014.
2
SPECTRUM dialogue Techno-Clinical Day - TORONTO
Program @ A Glance
CLINICAL PROGRAM at Room - Donald Cousens 1
Time
Speaker
Topic
8:30am - 12:30pm
Dr. Damon Adams
All-Ceramics What’s New? What’s Proven? Controversies and Clinical Tips Ivoclar Vivadent
3M, Shaw Lab Group
Time
Speaker
Topic
Sponsor
8:30am - 10:00am
10:00am - 11:30am
11:30am
12:15pm - 1:45pm
Dr. Mark McCullough
Dr. Jim Hyland
Exhibit Hall Opens
Dr. Murray Arlin
Advancements In Digital Dentistry
Healthy Mouth, Fresh Breath: it’s more than scaling teeth!
Biomet 3i
Oravital
CLINICAL PROGRAM
Time
Sponsor
at Room - Violet / Orchid
Periodontics & Implant Dentistry for the GP Office: Make it Simple
DENTAL TECHNICIANS BUSINESS PROGRAM
9:00am - 12:00pm
at Room - Donald Cousens 2
Sponsor
Speaker
Topic
Gary Maxom, CDT
Moving into the Digital Age and How it All Works Together
Palmeri Media Group
TECHNICAL PROGRAM at Room - Donald Cousens 2
Time
Speaker
Topic
Sponsor
1:00pm - 2:00pm
2:00pm - 3:00pm
Trish Scrimshaw, RDT
Steven Touchie
Will CAD/CAM make you more money?
DWOS LiveLink™ - Creates New Opportunities for Labs to
Grow Their Implant Cases
Zahn Canada
Dental Wings
3:00pm - 3:30pm
3:30pm - 4:30pm
4:30pm - 5:30pm
5:30pm - 6:00pm
6:00pm - 7:00pm
Exhibit Hall - Break
Peter Pizzi, CDT
Domenico Cascione, CDT
Bill Marais, RDT
7:00pm - 8:00pm
Claude Sieber, MDT
Esthetic Realities For Today and Tomorrow
Symbiosis: Art & Technique in Implant Dentistry
Full Arch Zirconia Hybrids: Predictable Results with GC Initial ZR-FS and
GC Initial Zirconia
The phenomenon of Translucency
Vident Canada
GC America
Vident Canada
DENTURIST PROGRAM at Room - Violet / Orchid
Time
Speaker
Topic
Sponsor
2:00pm - 3:00pm
3:00pm - 4:00pm
4:00pm - 4:30pm
4:30pm - 5:30pm
5:30pm - 6:30pm
6:30pm - 7:00pm
7:00pm - 8:00pm
Andrew Long, RDT
Fadi Touma, RDT
Bernard Robichaud
Andy Sommer, RDT, DD, LVIF
Ljepa Katanic, RDT
Creative Implant Solutions Using the Equator
Redefining Treatment Options
Nordenta
Dentsply Implant
Step 1: Subcontract bar manufacturing – Step 2: ?! – Step 3: Profit!
Enterra and Eclipse Materials
Panthera Dental
Dentsply Canada
Individuality in the field of implant prosthetics: Is ceramic
still the material of the future?
Central Dental
WiDS at Room - Evergreen
Time
Speaker
Topic
Sponsor
9:30am - 10:30pm
10:30am - 11:00am
11:00am - 12:00pm
12:00pm - 1:00pm
1:00pm - 2:00pm
Dale Tucci
Coffee Break
Shauneen Ryan
Lunch Break
Sandie Baillargeon
“Team Power” Strategies & Tools to Improve Team
Tucci Management
Infection Control in the Dental Office: Do you know the drill?
SciCan
Perfecting Your Practice
2:00pm - 3:00pm
Dr. Dana Colson
Lasers, Lateral Beams and Thought Processes!
Dental Office
Consulting Services
Biolase
8:00pm - 9:00pm Exhibit Hall - Cocktail Reception in Donald Cousens 3, 4 & 5
DENTAL TECHNICIANS
BUSINESS PROGRAM
CLINICAL PROGRAM
Room - Donald Cousens 2
9:00am - 12:00pm

3 points
Managing a Dental Laboratory in today’s
Environment
Moving into the Digital Age and how it all
Works
This interactive program will cover the fundamentals needed to
evaluate and implement into your business the major challenges
of Digital Technology. The technical challenges moving from
handmade restorations to an industrial process for you laboratory
and the technicians. Learn where to identify where the work
flow problems will occur and how to increase productivity and
profitability. Gain insight into proven methods on how to review
your business to discover ways to implement Digital Technology
and also implement corrective actions without slowing down
production. Turn your laboratory into a more profitable and
streamlined business that can help provide financial success in
any economy.
•
•
•
•
•
•
•
•
•
•
The Three Levels of CAD/CAM Integration
CAD/CAM by the Numbers
Digital Trends you need to Know
Major Challenges Implementing CAD/CAM
Understanding new Market Conditions
Evaluating New Materials
Embracing and Adapting to Change
Changing from Analog to Digital
Technical Challenges
Evaluating CAD/CAM and Printing Systems
Gary Maxon, CDT has been involved in the
laboratory industry for the past 40 years. He started
his own laboratory in Portland, OR, growing it to
over 25 people in two years; sold the laboratory
to LifeMark Corp. in Houston; then held several
positions with LifeMark as the manager of education and
training, vice president and group manager. He has worked with
PTC to give training seminars worldwide and with Vident as
manager of education. For the past 10 years, Maxon has been
involved with CAD/CAM systems, including the development of
the D4D system and training for CEREC systems. He also owns
Dental Laboratory Management in Dallas.
Palmeri Media Group
4
8:30am - 12:30pm

4 points
All-Ceramics
What’s New? What’s Proven? Controversies
and Clinical Tips
Knowledge of the latest indirect dental materials is vital to maximizing the aesthetic and functional success of your team-created restorations. Dental materials are sometimes being brought
to market and being widely used in patients without adequate
science-based evidence. Dr. Adams will help you increase your
understanding of the most advanced materials with the goal of
making better-informed choices.
A basic knowledge of today’s all-ceramic materials is also a must
for today’s assistants and hygienists, allowing them to explain,
discuss, and support treatment plans presented to patients that
include the most proven advanced aesthetic options. This full-day
science-based presentation is recommended for doctors, chairside assistants, hygienists and dental technicians.
Course Objectives:
• The basics classifications of the all-ceramic materials currently
available
• Advantages and disadvantages of each class of modern allceramic materials
• A review of some of the latest developments and innovations in
the world of all-ceramics
• How to minimize all-ceramic fractures/ failures to reduce
stress and increase profits
• 100% zirconium restorations: Evidence-based data versus
future challenges?
• New coping designs for HIP’d zirconia. Should our labs be slow
cooling, or fast cooling zirconia restorations? Myths versus
research!
• What are the best cements for all-ceramics available today?
The latest approaches to increase bond strength and decrease
microleakage. Curing challenges under ACs?
• An update on surface treatments for all-ceramics. Making it
much simpler!
• Treatment planning considerations for all-ceramics: opening
the doctor-technician channels
• Are all-ceramics always the best choice? What are some of the
best alternatives?
• The role of occlusion in the function and longevity of allceramics
• Ways to improve bite registrations for your dental lab team to
ensure better occlusal results
Dr. Damon C. Adams, a graduate of the
University of Michigan School of Dentistry, is an
assistant clinical professor at the University of
Toledo, College of Medicine (dental residency
program). He lectures internationally focusing on
updates in dental materials, the latest trends and innovations
in dentistry, doctor-technician relationships and technoclinical perspectives. He also facilitates hands-on preparation
workshops designed to optimize the utilization of allceramic
systems. In addition to his years in private practice, he has
had the opportunity to serve as a doctor-technician liaison for
numerous dental laboratories throughout North America since
1996. Dr. Adams is the editor-in-chief of Dentistry Today and,
prior to taking this position, was listed in Dentistry Today’s
Leaders in Continuing Education for 7 years until becoming the
chairman for the Leaders Selection Board. In addition, he also
serves on the Advisory Board for Spectrum Dialogue (Palmeri
Media Group). Dr. Adams is a member of the ADA, AGD, AACD,
SCAD, and the National Association of Dental Laboratories.
Ivoclar Vivadent, Shaw Lab Group & 3M
CLINICAL PROGRAM
Room - Violet / Orchid
8:30 am - 10:00 am

1 point
Advancements in Digital Dentistry
•
•
•
Abutment options and the impact on the success of the case
CAD/CAM solutions and its impact on your practice
New solutions in implant restorations
COURSE OBJECTIVES
At the end of the course, the participant should be able to:
• Utilize advanced technologies to meet aesthetic demands
while increasing productivity
• Understand why one abutment would be chosen as
compared to another
Dr. Mark McCullough is a graduate from the
University of Toronto, Faculty of Dentistry. He is a
member of the CDA, ODA, ODS, AGD, AACD, AAID,
and ICOI. He is on the dental faculty at Algonquin
College as well as Algonquin’s Dental Advisory
Committee. Dr. McCullough has a passion for technology, learning
and teaching. He instructs on many topics including beginner
and advanced implantology, hard/soft tissue grafting, CAD/CAM
and intraoral scanning, CBCT integration, sedation dentistry and
microscope enhanced dentistry. He is also enthusiastic about
business dentistry, owning multiple patient focused practices.
Biomet 3i
10 am - 11:30 am

1 point
Healthy Mouth, Fresh Breath: it’s more than
scaling teeth!
Build deeper relationships and inspire your patients by enhancing
patient care and wellness. Learn four test that will convince
your periodontally affected patients that they require treatment.
Effectively use microbiology testing and antibiotic rinses for
predictable results in the treatment of periodontal disease and
breath odour. Get your patients involved in their oral health so
they ask you “How are my gums? I don’t want them to bleed!”
Dr. Jim Hyland DDS, BSc (UofT), member of ODA/
CDA since 1976; Taught at UofT Faculty of Dentistry,
Seneca and George Brown College. Dr. Hyland was
on staff at North York Hospital Dental Department;
Philosophy learned from Crown Council Boot Camp is reflected in
his dental practice and presentation. Dr. Hyland’s dental clinic was
the first to adopt the Oravital System in 2008 and he has been
presenter for Oravital Inc since 2013.
Oravital Inc
11:30pm

12:15 pm - 1:45 pm
Exhibit Hall Opens

1 point
Periodontics & Implant Dentistry for the GP
Office: Make it Simple
Dental professionals are inundated with numerous publications
and as well with commercial salespersons. It is very difficult for
the private practitioner to do thorough research to differentiate
what are miracle materials or simply mighty marketing.
This seminar will highlight some of the current concepts in
Periodontics and Implant Dentistry and will address some of the
controversies that plague our industry.
Dr. Murray Arlin, D.D.S., dip Perio, F.R.C.D.(C)
received his D.D.S. from McGill University in 1977.
After 1 year Residency in General Dentistry at the
Jewish General Hospital in Montreal, he began
his Post-Graduate Program in Periodontics at the
University of Toronto, graduating in 1980. Dr. Arlin received his
Membership and Fellowship in the Royal College of Dentists of
Canada in 1981 and 1983 respectively. He has taught at the
Undergraduate and Periodontal Post-Graduate departments at
the University of Toronto. Dr. Arlin received his training in Implant
Dentistry initially in 1985 and since then has been actively
involved in Continuing Education. He has placed and documented
over 10,000 implants to date. He has lectured internationally
and has authored many articles on Periodontics and Implant
Dentistry.
5
TECHNICAL PROGRAM
1:00pm - 2:00pm

1 point
Will CAD/CAM make you more money?
Digital advancement are taking place everyday. Now is the time
to explore whether in-house milling will make you money in your
lab. We will examine different milling machine options depending
on certain lab needs. We will also explore different material
options depending on your patient/dentists needs. Finally, we
will demonstrate how in-house milling can make your laboratory
profi table and at the same time keeping control of your quality.
Whether you are outsourcing or have not engaged in digital
options at all - you need to know your milling options!
Trish Scrimshaw, RDT, received her diploma
from the Dental Technology program at George
Brown College in Toronto. Following graduation, she
took a position as an in-house laboratory technician
within the prosthodontic practice of Prosthodontic
Associates quickly moving to the position of laboratory manager/
laboratory technician where she gained additional experience
working with various CAD programs. In 2009 she established
Cheshire Dental Studio, which provides localized laboratory
services specializing in implants, cosmetic and combination
cases, all the while continuing to develop her interest in CAD/
CAM. Her experience with prosthodontic practices and digital
technology eventually led her to her current position of Digital
Technology Specialist with Zahn Canada.
Zahn Canada
2:00pm - 3:00pm
Dental Wings / Central Dental
3:00pm - 3:30pm  Break
3:30pm - 4:30pm  1 point
Esthetic Realities For Today and Tomorrow
What will separate us more then ever before in the years to come
will be our talent level and ability to understand the clinical/
technical side of dentistry. This lecture will focus on the “Team
Concept” of restorative dentistry and the importance of the dental
teams ability to effectively control the esthetic outcome. Under
the best of circumstances the transfer of information between the
dentist and technician for the fabrication of restorations is diffi cult
and challenging. Our educated patients and the advancement of
materials has created a need for us to didactically move through
the diagnostic process including biomechanical, functionally,
periodontal and
esthetically. With the advent of newer technologies such as
photographic, video and cad cam, our role in the communication
process will be a value to the dental community.
Peter Pizzi, CDT, MDT, FNGS, as an educator of dental

1 point
DWOS LiveLink™ - Creates New Opportunities For Labs To Grow Their Implant Case
DWOS LiveLink™ is Dental Wings’ new ground breaking
application for collaborative implant planning in Dental Wings
coDiagnostiX and prosthetic design in DWOS CAD. Through
a secure remote connection via DWOS LiveLink™ dental
technicians and dentists can now work together in real time to
determine the optimal implant position for the desired prosthetic
outcome. With DWOS LiveLink™ any change made in DWOS CAD
or coDiagnostiX is simultaneously updated in both applications.
This assures that surgical and restorative factors are considered
prior to implant placement. Once the optimal implant positions are
established and approved by the dentist, the lab technician can
6
proceed with confidence to design custom healing abutments,
provisionals, and the surgical guide all in the same DWOS CAD
session.
Steven Touchie is Vice President of Marketing for
Dental Wings Inc. His 28 years of varied experience
in the dental industry includes being the founder and
former owner of the Montreal based laboratory 3D
Dental. His current role at Dental Wings affords Steven
the unique opportunity to help labs apply digital technologies and
workflows that create trusted restorative solutions as well as
promising business opportunities.
technology and operatory procedures Peter has found
an easy transition into the lecture/clinician circuit. His
personal appreciation and expertise on all phases of
crown and bridge, porcelain, Implantology, muscle
function, mandibular physiology, Ceramics and photography have
made him a source of knowledge and motivation for his peers to
draw from. Peter currently lectures nationally and internationally
to both technicians and dentists for the communication process
and a predictable outcome of success for the patient.
4:30pm - 5:30pm

1 point
Symbiosis: Art & Technique in Implant
Dentistry
This presentation illustrates a systematic approach based on
the technician’s expertise with principles & techniques in order
to obtain predictable results on challenging implant cases.
Tissue management criteria on the implant restoration, with
a novel approach for noninvasive pontic site development, and
the importance of proper diagnosis, treatment planning, and
communication is emphasized.
Domenico Cascione, CDT, BS obtained his
primary education in Bari (Italy), where he was also
certifi ed as a Dental Technologist (CDT) in 1985.
He is a Master Ceramist and also is specialized
in metallurgy, implant work and complex esthetic
rehabilitation. From 2005 to 2008 he was Research Associate and
Program Director, Advance Training for Dental Technology at the
Center for Dental Technology, the University Of Southern California
School Of Dentistry. Since 2009 he became an Adjunct Faculty
as a Clinical Assistant Professor at the University Of Southern
California School Of Dentistry.
Vident Canada
5:30pm - 6:00pm  Break
6:00pm- 7:00pm  1 point
Full Arch Zirconia Hybrids: Predictable
Results with GC Initial ZR-FS and GC Initial
Zirconia
Far too many variables (heat rate, holding time, cracking, cooling)
hinder the fabrication of full arch zirconia hybrids. Add to that the
fact that we have no set formula to follow during fabrication we have become accustomed to following a standard formula
when fabricating single crowns and small span bridges (how to
grind, how to steam, what temperatures, cooling, etc.). With full
arch zirconia hybrids, technicians must rely on past experience,
intuition and logic to achieve the sought after outcome for a case.
This presentation will show you how to achieve predictable results
with GC Initial ZR-FS and GC Initial Zirconia during the fabrication
of full arch zirconia hybrids.
in a dental laboratory in South Africa for three years, Mr. Marais
immigrated to the United States in 1996, receiving his Bachelor’s
Degree in Prosthetic Sciences. In 1999, Mr. Marais opened his own
laboratory, Disa Dental Studio, a one-man laboratory focusing on
high-end, complex combination cases, in Santa Monica, CA. In
January 2011, he moved his family and the Disa Dental Studio
to Portland, OR. Mr. Marais continues his education by attending
numerous workshops and courses, including Frank Spears and
LVI.
GC America
7:00pm - 8:00pm

1 point
The phenomenon of Translucency
Claude Sieber began his career by completing
his studies in Art. During the early 1970’s he earned
his professional certification from the government
of Switzerland, completing his apprenticeship in a
small dental laboratory in Basel.
Over the next few years, he worked for several dental laboratories
gaining additional work experience. His practicum took him as
far as Rio de Janeiro, Brazil, where he worked at length with
Professor Olympio Pinto.
Claude Sieber has been the owner of a specialized dental
laboratory in Basel, Switzerland since 1984. In 1990 he dedicated
a training facility to the advancement of Expert Dental Ceramists.
He works with dentists worldwide, and he focuses on his special
interest of anterior tooth replacement.
Claude has lectured extensively throughout the world and his
original work in Fine Arts and Photography are prominent in his
visual and physical presentations. Since 2005 Claude is teaching
photography classes across the globe.
Claude Sieber was instrumental in the development of Vita’s
Spinell porcelain, Vitadur Alpha, Akzent stains, Luminairies,
Interno Color Effects, the Omega 900 porcelain systems, the 3-D
Master Color Shade Guide and the new VM Material .
Vident Canada
Mr. Bill Marais was born in Johannesburg, South
Africa and moved to Cape Town at the start of high
school. In 1993, he graduated as a RDT after four
years of study in Dental Technology from Cape
Peninsula University of Technology. After working
7
DENTURIST PROGRAM
Room - Violet / Orchid
2:00pm - 3:00pm

1 point
Creative Implant Solutions Using the Equator
This presentation will use several case studies to show how
challenging implant cases can be successfully resolved. The
Equator, which is available as an implant abutment, castable
attachment and threaded version, offers solutions where other
systems do not. We will take a look at some direct overdentures,
cast and milled bar challenges that denturists may face in their
practice and offer creative solutions to these implant cases.
Problem-solving and trouble-shooting will also be discussed.
Andrew Long, RDT, MICOI, ABIST has been in
the Dental Industry since 1976, and has spent
time working in England, Germany and Canada.
He has completed the Dawson Centre’s Occlusion
and Function Program and has trained with the
Millenium Aesthetics Program.

1 point
Redefining Treatment Options for the Edentulous Patient
In recent years there has been an increase demand for a more
removable options for conventional and implant dentistry. Today
with the help of unique components and Cad Cam technology
DENTSPLY IMPLANTS has developed multiple options for clinicians
and labs that allows them to offer high precision treatments with
different protocols that caters to the Edentulous case. Step by
step technique on handling each case from start to fi nish.
Fadi Touma, RDT, CDT is a 1994 graduate of Ferris
State University (Dental Technology program). He
worked in a prosthodontic specialty offi ce from
1994 to 2001. In 2001, Mr. Touma started his
own specialty laboratory focusing on full mouth
reconstruction, implants and cosmetic dentistry. He has extensive
implant knowledge and experience with most implant systems. Mr.
Touma holds an American certifi cation in addition to his Canadian
registration. He is currently the DENTSPLY Implants District Sales
Manager and Technical Advisor for the Eastern region of Canada.
Dentsply Implant
8
4:30pm - 5:30pm

1 point
Subcontract bar manufacturing – Step 2: ?! –
Step 3: Profit!
How could it be more profitable to subcontract the manufacturing
of your implant bars, and even their design than to fabricate them
yourself? Discover solutions to increase your profit margin on
implant buy and other CAD/CAM products.
Bernard Robichaud is the co-founder of
Panthera Dental, a lecturer, and a specialist in high
technology CAD/CAM dental products. He graduated
in telecommunication at college Radio Television of
Quebec. During his career he led several lectures
in English and French in more than 10 countries and trained over
400 dental specialists in CAD/CAM dental field.
Panthera Dental
5:30pm - 6:30pm

1 point
Enterra and Eclipse Materials
Nordenta
3:00pm - 4:00pm
4:00pm - 4:30pm  Break
This course will demonstrate the Enterra® VLC Unit, which
provides versatility in fabricating high quality appliances while
saving time, space and money. Enterra provides an effective
curing system for multiple types of visible light cured fixed and
removable appliances, using a variety of traditional and innovative
materials, resulting in less working time. Participants will have the
opportunity to discover time-saving benefits of the material and
curing units and how they can increase productivity in the clinic.
Andy Sommer, RDT, DD, LVIF : Starting his
dental career in 1982 with a family-owned dental
laboratory, Micro-Dent in Toronto, Andy Sommer,
RDT, DD, LVIF (Owner, Denturist) has over 30 years
of combined clinical and technical experience in the
field of dental technology. Attended George Brown College Dental
Technology program, he has worked in all areas of the dental lab:
crown & bridge, dentures, cast partials and orthodontic appliances
and is able to bring that broad range of expertise and experience
in comprehensive dental restorations to bear on your individual
situation.
Andy has assisted chair side with Dentists on numerous occasions
for complex restorative cases.
Andy believes it is very important to keep current with all
innovations in the industry by studying techniques from around
the world to further enhance his services to you. He has taken,
and continues to take, numerous courses in occlusal rehabilitation,
including innovative concepts such as LD Pankey, Neuromuscular,
Implantology, Dental Ceramics, Crown and Bridge Techniques,
Dentures as well as Orthodontics. Today he serves as a Dental
Technology consultant and lecturer on restorative options for
leading dental manufacturers such as Myerson and Dentsply.
As an outsource lab for the University of Toronto, Dental
Department, Micro-Dent was involved with the university’s
early Implant research Toronto Ltd. program, providing technical
lab support. Working closely with his father, Andy was involved
in initial bar and hybrid designs for new and exciting fixed and
removable implant prosthesis. In 1992, he started Sommer
Restorative Prosthetics (SRP), a laboratory specializing in implant
restorations. This firm merged with Aurum Ceramic (Canada’s
largest dental lab group) in 1994 to create Classic Dental Labs
(Toronto) In 2010, Andy attended the Trillium College for Denturism
and received his diploma in Denturism (DD). Initially starting
with a 1000 sq. ft. facility, Classic is now housed in 8,400 sq.
ft., complete with an education facility – and the site of Sommer
Denture Centre, specializing in complex denture rehabilitations.
Dentsply Canada
6:30pm - 7:00pm  Break
7:00pm - 8:00pm

1 point
Individuality in the field of implant
prosthetics: Is ceramic still the material of
the future?
Ceramic and Zirconium are often too hard for human tissue and
serve no resilience in protecting the body for long term use.
Polymer, composite, and/or acrylics currently used as prosthetic
dental materials are too weak in strength, dissolve quite easily
showing no restraint to colour changes, often can produce a bad
odor and are prone to bacteria adhesions.
In this presentation, the speaker demonstrates the concepts
and materials used to achieve optimal patient satisfaction. With
Bredent Group’s innovative new system; Visio.lign the above
mentioned weaknesses and shortages will be overcome. The
aesthetic options possible with new and modern materials, such
as modified composites, are demonstrated on the basis of fixed
and removable restorations on implants. The speaker poses the
provocative question, “Does it always have to be ceramic?“
Ljepa Katanic, obtained her Dental Technology
degree from George Brown College in 2007. Upon
her graduation she gained 5 years of experience
in dental labs within Ontario. Ljepa is currently
providing technical and business support to Central
Dental Ltd focusing her vast knowledge of the Bredent product
line after receiving hands-on training both in Germany and from
Peter T. Pontsa R.D.T. and former owner of Dent-Line Of Canada
Inc.
EDUCATION
LOOK FOR THESE EXCITING UPCOMING
EDUCATIONAL OPPORTUNITIES:
Aesthetic Design & Implant Academy
A Multidisciplinary Study Club for Dentists
www.adiacanada.com
Denturism Implant Study Club
A Multidisciplinary Study Club for Denturists
www.disccanada.ca
Dental Technology Academy
A Multidisciplinary Study Club for Dental Technologists and Technicians
www.dtacanada.com
(The exclusive education provider of the ADTO in the GTA)
Oral Surgery for the GP
A Practical Approach
3 Day Hands-On Seminar
www.adiacanada.com
2-Day Live Patient Hands-On Oral
Surgery Clinical Session
Clinical Hands-On Oral Surgery Session for the GP
www.adiacanada.com
The All-On Treatment Procedure
www.adiacanada.com
Periodontics for the GP
A Practical Approach
3 Day Hands-On Seminar
www.adiacanada.com
Central Dental Ltd.
9
Thank you to Our Sponsors
Spectrum Day Toronto would like to express its appreciation to our loyal sponsors
for their ongoing support and generosity.
Our sponsors allow us to offer you a world class program of
unprecedented value every year.
2014 Sponsors
Opportunities for
Assistant Technicians
Update your skills and expand your
knowledge in dental technology
George Brown College offers evening and weekend courses
for Assistant Technicians. Applicants must be employed in a
dental laboratory or have the permission of the instructor to
enroll in the class. Choose from the following subject areas.
� Functional Anatomy
� Crown and Bridge I and II
� Dental Ceramics I and II
� Denture Construction I and II
� Orthodontics I and II
� Removable Partial Dentures
Please note that some courses require students to bring their own
hand tools and equipment.
View detailed course descriptions and requirements online at
coned.georgebrown.ca/health
Registration for fall classes opens July 6!
Questions? Call us at 416-415-5000, ext. 2126, or
long distance at 1-800-265-2002, ext. 2126.
10
Periodontics for the GP: A Practical Approach
Dr. Edy Braun, Hon. BSc, DDS, Cert. Perio, FRCD(C)
A Three Day Hands-on Seminar
Date: October 31st - November 2nd 2014 - $2,200 + HST
Location:
Day 1:
Day 2:
Day 3:
Save Your
Placement
NOW!
Springhill Suites by Marriott Toronto/Vaughan
612 Applewood Crescent, Vaughan, On L4K 4B4
Periodontal Disease
1. disease etiology overview, monitoring and charting, hygiene surveillance
2. radiographic interpretation, treatment planning, proper sequencing
3. non-surgical options, chemotherapeutics, lasers
4. resective surgical techniques
a) open flap debridement - flap curettage, distal wedge
b) crown-lengthening (esthetic and functional)
Regenerative surgical techniques
1. Soft-tissue grafting
a) free gingival graft
b) connective tissue graft
c) frenectomy
2. Hard-tissue grafting
a) guided tissue regeneration (osseous defects around teeth)
b) guided bone regeneration (for implant or pontic site development)
Hands-On Surgery and Suturing
1. practice techniques learned in the first 2 days....
2. open flap debridement surgery, continuous sling sutures
3. crown-lengthening surgery, vertical external mattress sutures
4. ridge augmentation surgery/implant bone graft, split-thickness flap
5. free gingival grafting and associated suturing
6. connective tissue grafting and associated suturing
To register contact:
Palmeri Publishing at 905.489.1970 Ext. 206/207 or
Email: seminars@palmeripublishing.com
events@palmeripublishing.com
u 21 credits for seminar attendance
Approved PACE Program Provider FAGD/MAGD
Credit Approval does not imply acceptance by a
stateor provincial board of dentistry or AGD
endorsement 9/1/2013 to 8/31/2015 .
Provider ID# 355116
Spectrum dialogue Techno-Clinical
Palmeri Publishing Inc.
Phone : 905. 489.1970 Ext. 206/207
Day Fax
Toronto
Orders: 905. 489.1971
11
SPECTRUM dialogue
WOMEN IN DENTISTRY
Techno-Clinical Day - TORONTO
Room - Evergreen
9:30am - 10:30am

1 point
“Team Power”
Strategies & Tools to Improve Team
This presentation is ideally suited for business owners and their
team members. Attendees will learn strategies and tools to
immediately implement in their offices. Team have a powerful
impact on business performance and a great team is within every
practice’s reach.
Dale Tucci is the CEO of Tucci Management
Consultants Incorporated providing dental practice
management consulting services for over 25
years across North America. The firm offers a
variety of practice management services: business
performance assessments; human resource development;
associate and associate/buyer recruiting; transition planning;
marketing plans and customer service training. Dale has more than
three decades of hands-on consulting with dental professionals.
TMCI’s approach is results-oriented and customized to meet
unique client needs and timelines. We pride ourselves on working
collaboratively with our clients to meet and exceed expectations.
Tucci Management Consultants Inc
10:30am - 11:00am  Coffee Break
11:00am - 12:00am  1 point
Infection Control in the Dental Office: Do you
know the drill?
1. Understanding our risk - A break down of the new organisms
we face
2. Assessing Disinfect¡on or Steril¡zation Processes - What,
when, why, where and how safe are our chemicals
3. Education and Training, Written Policies and Procedures - The
Role of the infection control officer
4. Factors Affecting the Efficacy of the Reprocessing Procedure
- Why does Sterilization fail?
5. Transportat¡on and Handling of Contaminated Medical
Equipment/Devices
6. Cleaning lnstruments and handpieces - Ultrasonics, washers,
and lubrication
7. Sterilization of Reusable Equipment/Devices
8. Storage and Use of Reprocessed Equipment
12
Shauneen Ryan, is a graduate of Ontario
Business College dental assisting program with
severalyears working in hospital and private
dental cliníc settings. Her career working with
dental manufacturers gave her the opportunity to
educate dental clinics on various dental products and equipment
throughout North America.
As a ScíCan representative, Shauneen is able to implement all
aspects of her expertise including the CDC, RCDSO and OSAP
standards and guidelines on a day to day basis. Her training
accomplishments include being invited to attend the infection
control boot camp with the US military organized by OSAP (The
Organization for Safety and Asepsis Prevention). After working
closely with several tenured educators involved ín the infection
and prevention control circuit, including several well respected
oral health professionals, she was prompted to share her
knowledge with the dental community.
SciCan
12:00pm - 1:00pm
Lunch for Purchase  Exhibit Hall Open
1:00pm - 2:00pm

1 point
Perfecting Your Practice
•
•
•
•
Learn how to build and maintain solid professional
relationships and customer loyalty
Learn how to perfect your internal business systems to
achieve success
Learn how to perfect your human resources system by hiring
well and firing well
Learn how to create an internal culture committed to
providing your customers exceptional care
Sandie Baillargeon is a leading authority
on how to increase the effectiveness of dental
business systems. She is the author of two text
books, Dental Office Administration and The
Canadian Dental Office Administrator Dental Office
Consulting Services specializes in dental business planning, staff
development, consulting and continuing education seminars. Visit
her website at www.dentalofficeconsulting.com or contact her
directly at (905) 336-7624.
Dental Office Consulting Services
2:00pm - 3:00pm

1 point
Lasers, Lateral Beams and Thought Processes!
Lasers are truly a dental paradigm! Lasers help us think outside of
the box into new areas of healing. What
otherwise may have been a very guarded prognosis , laser
applications can shift the outcome to a more
favourable prognosis. This lecture looks at real time video
procedures and post ops that allows faster healing
and less stress chairside, not only for the dentist and team but
also for the patient. Application involves not
only soft tissue but also hard tissue, teeth and bone. Local
anaesthetic is often not needed! Minimally invasive
dentistry makes it fun for everyone. We all deserve a win-win
situation!
Dr. Dana Colson practices wellness-based
dentistry in midtown Toronto. She graduated from
the University of Toronto in 1977. Throughout
her career Dana has committed to extensive
continuing education. Dana has studied
Acupuncture, Nutrition, Craniosacral Therapy and Homeopathy.
Dana has also taken courses in active listening and NLP. Dana
holds accreditation in IAOMT, achieved FAGD, and is a member in
several professional organizations, including the ODA/CDA, AACD
and HAPA. She is also a graduate of both the Pankey Institute in
Florida and the Kois Curriculum in Seattle. Dr. Colson has recently
authored the book Your Mouth: The Gateway to a Healthier You.
Dana has lectured extensively in Canada and internationally on
general, laser and cosmetic dentistry, integrating her unique
wellness based approach.
Biolase
Palmeri Media Group
makes your message STAND OUT
As a leader in publishing, online media and
marketing operations, Palmeri Media Group
maximizes the power of your online campaigns.
Leveraging a combination of scale, efficiency and
cost saving we deliver best-in-class digital services and
solutions for dental marketers in the world.
We can help you MAXIMIZE your digital world...
DIGITAL
u
u
u
u
u
u
u
Website creation
Website updates
Digital reprints
Targeted Email marketing
Digital editions
Digital news letters delivery
Digital data
PRINT
u Custom publishing print
u Reprints
u Brochures
u Event programs and materials
Call: 905.489.1970, 1.866.581.8949 or
visit our website: www.palmerimediagroup.com
13
Knowledge is Power
Get it for your dental library today
Fascinating All- Ceramics
by Oliver Brix
In 15 chapters and 1200 images, of the highest quality
and resolution, featuring special 3d printing, the author
describes in minute details how to use lithium disilicate
by presenting clinical cases that he has worked on in cooperation with other world renown clinicians.
$199.00+GST
Chapter 1: Introduction
Chapter 2: The correct procedures for aesthetics restorations treatment goals
Chapter 3: e.max: The material from A to Z
Chapter 4: The layering technique with e.max Ceram
Chapter 5: Colour examples, enamel blends and chroma control
Chapter 6: Preparation instructions
Chapter 7: Veneers
Chapter 8: Crown restorations with the e.max system from A to Z
Chapter 9: Crowns and veneers
Chapter 10: Zirconium and bridges made of zirconium
Chapter 11: Implants
Chapter 12: Cross-mounting
Chapter 13: Minimally invasive and no-prep method
Chapter 14: Dental miracles
Chapter 15: Instruments
Mail Orders: 35 -145 Royal Crest Court, Markham, ON L3R 9Z4
Phone Orders: 905.489.1970 • Fax Orders: 905.489.1971 • Online Orders: www.SpectrumDialogue.com
SPECTRUM dialogue
October 24, 2014
Techno-Clinical Day
TORONTO
Hilton Suites Conference Centre & Spa (Toronto/Markham) 8500 Warden Ave, Markham, ON L6G 1A5
Please complete sections A - C
Fax completed form to: 905.489.1971
Mail form to: SPECTRUM dialogue Techno-Clinical Day TORONTO • 34 - 145 Royal Crest Court, Markham, ON L3R 9Z4
Register Online: www.spectrum-day.com
Questions? Call: 905.489.1970 • 1.866.581.8949 • Email: events@palmeripublishing.com
A. Contact Information: (please print)
1/ First Name: Last Name:  RDT  DDS  DD
Company:
Address:
City:
Prov.:
Postal Code:
Phone:Fax:
Email:
Please note that by giving us your email, you are giving Palmeri Publishing Inc. permission to send you emails/CEM’s. We respect your privacy and you can unsubscribe from our emails at anytime
B. I am a:
 Dentist
 Dental Assistant  Hygienist  Dental Technologist  Technician  Denturist  Orthodontist
Other: Please specify:
C. I am a Member of: (check all that apply)
 ADTO
 CACD
 CAED
 ODA
 ADIA
 DTA
 DISC
 SADA
 OAGD
Other: Please specify:
Free Admission with advance registration!
($59 at the door)
15
Join ADIA for 2015!
2015 Program
10 Half Day Seminars
3 Evening Seminars
(Breakfast, break or dinner included)
Please contact:
events@palmeripublishing.com | seminars@palmeripublishing.com
905.489.1970 | Toll Free 1.866.581.8949
www.adiacanada.com
Approved PACE Program Provider FAGD/MAGD Credit
Approval does not imply acceptance by a state or provincial board of dentistry or
AGD endorsement 9/1/2013 to 8/31/2015
Provider ID# 355116

Spectrum Day Toronto 2014 - program2 .indd

Transcription

Similar documents

TLC-Dec15-Ronit-3

4th of july sendiks - Nehring`s Sendik`s Downer

DIGITAL IMAGING - THE NEW STANDARD OF CARE

to this!

HONORS CONVOCATION TO FEATURE FAMU

ACDLA Cosmetic Dental Grant Campaign

SUNDAYS FROM 10:00AM

2016 SFOpen Dance Camp

Grace Dental 12425 55th St N Lake Elmo, MN 55042 phone 651

dental fear? - Sedation Dentist Ocean City