Thermelt Knot Filler

Thermelt® Knot Filler
Knot hole or damage in your wood material? They can now be repaired!
Loose knots, large scratches and damages on edges can now be perfectly repaired with Thermelt®
Knot Filler by Rangate. Our Knot Filler is made from polyamide / nylon, which has been specially
developed to bond wood without developing cracks or shrinkage.
The Knot Filler selection depends on the material types and
finishing colors. We offer fourteen (14) different combinations of
polyamide colors and types to best suit your applications.
The repair is easy to make as the Thermelt® Filler is applied with a
Knot Filler gun. After applying, the surplus Filler is then removed
with a sharp cutting tool or chisel immediately. The surface
becomes smooth and is ready for any finishing treatment. The Knot
Filler accepts all forms of surface treatments.
For special applications, Thermelt® 162, a hard and sand-able
polyamide Knot Filler, is specially made for the flooring industry,
where a high heating resistance on the Filler is required.
Thermelt® Knot Filler is available in three (3) types:
813-series: For cutting
134-series: For cutting and sanding
162-series: For sanding
For more information: 888‐810‐2522
info@rangate.com http://www.rangate.com Thermelt Knastfylder / Knot filler / Astfüller
160oC
134-2
813 Semi-Transparent
813 Off-white
160oC
162 Transparent
210oC
134 Sort/Black/Schwarz
160oC
How to do
140oC
12mm
1
140oC
813 Ivory
140oC
2
813 Beige
140oC
3
813 Amber
162 Straw
210oC
162 Brun/Brown/Braun
210oC
140oC
4
•
Knastfylderen ”skydes” ned i skaden med en limpistol.
•
”Shoot” the Knot filler into the damage with a knot filler gun.
•
Der Astfüller im Schaden mit einer Astfüller Pistole ”schießen”.
•
Reparationen køles ned med et kølejern et kort øjeblik.
•
Cool down the repair with a cooling iron for a short while.
•
Die Reparatur kurz mit einem Kühleisen abkühlen.
•
Når kold, fjern overskydende fylder med et skære- eller stemmejern.
•
When cold remove surplus filler with a cutting tool or a chisel.
•
Wenn kalt überschüssiger Füller mit einem Hobel entfernen.
•
Efter pudsning er reparationen klar til efterbehandling.
•
After sanding, the repair is ready for treatment.
•
Nach Schliff, die Reparatur ist klar für Nachbehandlung.
300mm
134-1 Mahogany
813 Oak
140oC
162-2
210oC
162 Cola
210oC
•
Indstil venligst temperaturen korrekt.
•
Please adjust the temperature correctly.
•
Bitte die Temperatur korrekt einstellen.
•
Knastfylder er pakket i lufttætte poser med 10 stænger. Posen skal lukkes grundigt efter brug.
•
The knot filler is packed in air tight bags containing 10 sticks. The bag must be sealed very well after use.
•
Der Astfüller ist in luftdichten Tüten mit 10 Stangen gepackt. Nach Gebrauch Tüte wieder gut verschließen.
888-810-2522 info@rangate.com