Committed to serving you since 1923

Valid April 1 to 30, 2013
Volume 13, Issue 4
Professional Tools.
Professional Results.
DanaDay coming your way in May
Powerplus III T27 Grinding Wheels
A24R, 4-1/2” x 1/4” x 7/8”
#500418
$3.35/ea
Box of 25 $79.25
A46T, 4-1/2” x 1/16” x 7/8”
#501622
$2.90/ea
Box of 25 $66.25
A30 Powerplus Duo T27 Cutting & Grinding
4-1/2” x 1/8” x 7/8”
13,300 Max RPM
Side load capacity +/- 290 n
#500415 $2.70/ea, Box of 25 $64.00
In case you haven’t heard, we’re turning 90 this year and we’re
celebrating. We hope you’ll
join us for a series of special
supplier sponsored days
starting
with
DanaDay
coming in May.
Check this spot in our May
flyer or our website for
upcoming details. See you
then!
Bay #1 Michael Street shop, circa 1960’s
2” Mini-Mite Surface Conditioning Disc.
Roll-on type mount. 30,000 Max RPM
Medium #502257 $1.15/ea, Box 50 $53.00
Coarse #502259 $1.25/ea, Box 50 $59.00
2” A36 Mini-Mite Aluminum Oxide Cloth Disc.
Roll-on type mount. 30,000 Max RPM
#502122 $0.75/ea, Box of 100 $68.00
Recycled Rubber Wheel Chocks
You know you need a set
Contour style
Large eye bolt
#671-1048 $21.30/ea, $39.90/pr
Wheels: 22.5” x 8.25”. 10 Bolt,
285.75mm Circle. 220mm Bore.
White Steel
Zinc phosphate pretreat. Acrylic E-coat
primer. 2 hand holes
Approximate weight 70lbs
#50308PW
$96.50/ea
Fully Polished Aluminum
10 hand holes. 2.75”
Approximate weight 45lbs (25lbs lighter
than steel)
#41644XP
$284.50/ea
Wheel Checks
Stop needless retorqueing
1-1/2” #WCH02 $0.90/ea, $17.00/bag of 20
1-5/16” #WCH03 $0.80/ea, $15.00/bag of 20
7/8”
#WCH04 $0.80/ea, $15.00/bag of 20
Super MUTT Deluxe SE
Remote Controlled Diagnostic Trailer Tester
Manual, remote or auto testing. 12/24 Volt
DC. Fits group 31 battery. 7-way round pin
connection
Electrical Testing:
Power lights individually or all at once
Locate and identify short, crossed, open & overloaded
circuits
Access ABS fault codes
Amperage readout (0 to 20 Amps).
Audible & visible alerts
Air Brake Testing:
Pulse air to check brake operation
with remote
Leak down test on service &
emergency lines
Adjust slackers & measures
pushrods with remote
#IPA-9008SE
New Lower Price $2,595.00/ea
Comes with: 1 Remote, 5’ 7-way cable, chassis ground cable,
external battery connector & 6ft glad hands
Committed to serving you since 1923
MalmbergTruck.com
90
Years
Gladhands & HD Zinc Die-Cast
Connectors & Sockets
In Person:
Gladhands. 1/2” Female Pipe Thread
LeRoy Anderson
Blue Service Gladhand
#12-006 $2.95/ea, $62.50/box of 25
Counter Supervisor
Malmberg
Michael Street
Red Emergency Gladhand
#12-008 $2.95/ea, $62.50/box of 25
The King is in the building! LeRoy Anderson has returned to his
roots at Malmberg’s after a 7 years absence. A native of
Clarenville, Newfoundland, LeRoy risked it all and moved to
Ottawa in 1988 where he worked off and on in the seasonal
construction trade. In 1995, wanting something more
permanent, he began his career as a very green parts
counterman with Malmberg. Today, LeRoy returns to
Malmberg as the Counter Supervisor and we couldn’t be
happier to welcome him back.
LeRoy has two sons and is still married to his high-school
sweetheart. He’s a hockey trainer on his oldest’s minor midget
team. Besides the obvious fishing, snowmobiling and
4-wheeling “Newfies” are know for, he’s also quite handy at
home renovations. Goes to show you can’t keep a good
Newfoundlander down.
6-Way Socket. Wire insertion split pin
#15-600 $5.85/ea
6-Way Connector
#15-610 $4.35/ea
7-Way Socket. Wire insertion split pin
#15-720 $6.85/ea, 10 or more $6.45/ea
7-Pin Connector. With cable guard
#15-730 $5.80/ea, 10 or more $5.50/ea
Socket Boot. Fits 15-720
#15-740 $1.25/ea
Supplier Profile:
SAF Holland Hooks, drawbars, 5th wheels, kingpins, landing gears
Rigid Mount Pintle Hook
2,000lbs Max VL. 10,000lbs Max GTW
FastLatch one-hand automatic secondary lock
For 2” to 3” drawbar eyes
#PH-10RP41
$47.70/ea
Rigid Mount Pintle Hook
6,000lbs Max VL. 30,000lbs Max GTW
Same features as above
#PH-30RP41
$54.40/ea
Rigid Mount Air Cushioned Pintle Hook
20,000lbs Max VL. 100,000lbs Max GTW
Same features as above. With plunger, air
chamber & mounting bracket
#PH-410RA11
$299.80/ea
2.5” Rigid Mount Drawbar. 4-Bolt Flange
8,000lbs Max VL. 40,000lbs Max GTW rigid
tongue trailers / 500lbs Max VL. 60,000lbs Max
GTW hinged tongue trailers
#DB-040DQ1
$63.85/ea
3” Rigid Mount Drawbar. 4-Bolt Flange
15,000lbs Max VL. 60,000lbs Max GTW rigid
tongue trailers / 500lbs Max VL. 90,000lbs Max
GTW hinged tongue trailers
#DB-060FQ1
$112.45/ea
Replacement Top Plate
55.000lbs Max VL. 150,000lbs Max GTW
Left hand release handle
#XA-351-A-L-P $925.20/ea
2” Mushroom Kingpin
.38” upper coupler thickness
#KP-T-809-F
$62.55/ea
Spring Loaded Dual-Pin Drop Leg
12,500lbs lift capacity. 20,000lbs static load capacity
12” screw travel + 14” drop leg travel in 2” increments
24-3/8” retracted & 50-3/8” extended length
Comes with handle
#LGD700-213072018
$195.25/ea
Universal Mount Landing Gear Set
Weight saver 10” x 10”x3/8” sand shoe
16.5” travel. 47.5” extended. 31” retracted
Comes with: cross shaft, crank, crank hanger, 2x
brace ears, bracket, 2-speed gear side leg and
idler leg.
#LGS-3A115
$543.65/set
Replacement Legs
#XA-S8-3A115 2-speed gear leg $354.20/ea
#XA-S9-3A115 Idler leg
$244.80/ea
Committed to serving you since 1923
MalmbergTruck.com
90
Years
Aluminum Slide-in Dump Body
Specs
Do you have a 1-ton pick-up but wish you had a
dump box instead? Now you can have both.
Volume
Equifab’s slide-in dump body converts any existing Weight
pick-up with a 6.5’ or 8’ box into a fully-functional
Length
dumper. All Made in Canada!
Width
Typical Equifab fare, the whole assembly is top
Height
quality with the floor and top rail made of
aluminum extrusion and a 7T telescopic cylinder,
Angle
two-way tailgate, cab protector and tarp.
Capacity
Installation is easy and can be retrofitted back to Cycle Time
pick-up bed just as easily if you plan to sell the
Walls
truck and re-install the dumper into another truck.
Floor/Rails
6.5’ model from $5,400.00/ea
8’ model from $5,600.00/ea
8.0'
3
1.7 Y
2.1 Y3
450lbs
500lbs
79-1/4"
97"
48-1/8"
21"
46o
7,000lbs
40 sec
3/16" 5053 Aluminum
6061 Aluminum Ext
Full Installation $500.00/ea
Drive a SPIF-y truck Lets’ face it: SPIF is here and it’s not
going away. With more provinces and even some states looking
into it, we may as well get on board and get it done right.
Safe, Productive & Infrastructure-Friendly is a science mastered
by very few and far between. At Malmberg though, we could
teach a clinic on it with more in-house SPIF experts than
anywhere else. Not bragging, but let’s just say the other “SPIF
pros” send their problems to us to fix from all over Ontario.
Furthermore, our shop is the only shop in the National Capital
Region with the scales necessary to properly calibrate SPIF
systems. So, see us now or see us later for you SPIF needs…
And why would you go elsewhere? Malmberg has been the
pioneer at outfitting trucks of all sizes and types since 1965. We
think we’ve had enough practice by now.
6.5'
Ultra Line Steel
Landscape body
The premier lightweight drop side landscape body from
Beauroc. Get ready early and buy now.
11g/1/8” Domex 100W sides, posts, front & tailgate
3/16” Hardox 450 floor
8” C-channel sills
11’ long x 15” sides x 24” tailgate. 88” inside width
Standard front mount telescopic hoist w/6” recess
Made in Vars, Ontario
Starting from $10,995.00/ea, installed
Crane-ium
Just in case you’re
wondering what else Malmberg does,
we’re also your source for crane sales,
service and inspections.
Our residents expert Jeff Marquart—
with the help of his protégé Chris
Moase— is know across the land as the crane guru, with well
over 30 years experience and more than 20 of those as a
factory trained technician.
All major brands and types, from articulated to straight to
drywall. We do magnetic particle testing and repair cracked
welds. Obviously, we’re also hydraulic experts.
Need your annual lifting device
certification? Close the phonebook
and call us for your hoists, forklifts,
booms and baskets.
Where else than Malmberg?
This body installed at Malmberg
A salt box in April? We’re not late for
winter; we’re early for next year!
35” W x 24” D x 30” H. 8.8 cu/ft
Durable, corrosion free black Poly
Lockable slopped lid (lock not included)
Forklift slots and hand holds
Save in Spring! Limited quantities
#9031100
$119.95/ea
Committed to serving you since 1923
MalmbergTruck.com
90
Years
Lowe and behold! One of Malmberg’s very own
technicians—Alex Lowe—has been selected to represent
Eastern Ontario at this year’s 24th annual Ontario
Technological Skills Competition to be held May 6 to 8 in
Waterloo, Ontario. Alex will be participating in the Truck
and Coach Apprentice Technician category. Lets all root for
our hometown boy to do us proud. Good luck Alex!
Work Lights
LED Signal-Stat Auxiliary Lamps
Die-cast aluminum housing. Polycarbonate lens
No-Sweat Safety Season Are you way behind on your
annual safeties? Do you need some help catching up?
Don’t forget Malmberg has two full service locations that
can help if you’re in a tight spot: 1621 Michael Street and
25 Slack Road.
Broke down and your shop is full? Bring it on over. Mobile
Drive Clean & I-beam Axle Surgeon service. MTO
inspections, NSM certification, S.P.I.F. certification.
In-house spring, hose and brake shops. Light duty &
automotive to military grade and RVs with everything in
between. Trucks, trailers and equipment. Whatever you
have, we do it. Why go elsewhere?
Our business is helping your business. We’re the original
Malmberg and we’ve been doing it all for 90 years.
Stainless hardware. 18 gauge wire
Multi-volt design
Air Tanks
4” Round. 8 Diode
540 lumens
#8150 $70.50/ea
4” Rectangular. 8 Diode
540 lumens
#8155 $70.50/ea
4” Rectangular. 10 Diode
750 lumens
#8160 $79.00/ea
5” Rectangular. 9 Diode
950 lumens
#8170 $114.85/ea
Meet SAE J10 & FMVSS DOT 121 for air
brake systems
150 psi max working pressure
Every tank date coded for traceability
1425 cu/in. 8” x 29”
Mount holes 32”. 3 port
#2000
$65.55/ea
1488 cu/in. 9-1/2” x 22-1/2”
Mount holes 27-1/2”. 4 port
#2001A
$64.70/ea
2800 cu/in. 12” x 27”
Mount holes 29-1/2”. 4 port
#2002A
$92.60/ea
2800 cu/in. 12” x 27”
Mount holes 29-1/2”. 3 port
#2002D
$92.60/ea
Rubber 4-3/4” Round. Glass Lens
35 watts. 2,500cp
Clear trapezoid lens
#80360 $10.15/ea
Rubber LED 4-3/4” Round Flood
6 diodes. 500 lumens
Polycarbonate lens flood lamp
#81260TL
$56.55/ea
Dyett Advice:
NOT stored wet Well, it’s getting time to store away
LED Auxiliary Lamps
6 diodes. 500 lumens
12 volts
Work Lamp
#81360 $97.70/ea
Flood Lamp
#81380 $97.70/ea
All Truck-Lite products available in store
your winter equipment again. Avoid those ”it was
working when I put it away last spring” moments and
take care of your equipment before you store it away.
Thoroughly wash, inspect, lubricate and properly store
your equipment (jack stands, battery trickle chargers,
fuel stabilizer, etc). This will avoid the expensive false
start up when it’s time to bring it out again next fall.
Henry Dyett is the Night Shift Foreman at Malmberg’s Equipment
Division on Slack Road. He has 43 years experience and has been a part
of Malmberg’s team for an incredible 40 of those. Malmberg customers
are lucky to have Henry and the entire Malmberg team available to
answer any service and repair issues they may encounter. Another
Malmberg Service Advantage.
Committed to serving you since 1923
MalmbergTruck.com
90
Years
Belts, Hoses, Pulleys
& Tensioners
Since 1970
ISO 9001 Certified
Smooth non-flanged pulley
10-rib Poly V. 39.25mm
#49111
$34.40/ea
Stainless Steel Clamps. 3” Width
Smooth non-flanged pulley
12-rib Poly V. 46.25mm
#49112GY
$31.95/ea
4” Diameter
5” Diameter
GRWFC-4
GRWFC-5
$8.20/ea
$8.90/ea
Flex Pipe. Sold by the foot
Grooved flanged pulley. 6-rib Poly V. 27.5mm
#49126
$21.95/ea
Smooth non-flanged tensioner
Cummins, Case IH
#49501
$122.20/ea
Smooth non-flanged tensioner
International, Cat
#49504
$180.45/ea
HD 304 Stainless Steel
4”
#GRSF-4120
5”
#GRSF-5120
$12.85
$16.20
Galvanized Steel
3”
#GRGF-3120
3.5”
#GRGF-35120
4”
#GRGF-4120
5”
#GRGF-5120
$4.45
$4.50
$4.15
$5.35
Aluminized Straight Pipe. Sold by the foot
Smooth non-flanged tensioner
John Deere, Cummins, Cat
#49507
$103.60/ea
3”
4”
5”
#17375
#17386
#17425
#17446
#17525
#17561
#17570
o
$13.05/ea
$13.95/ea
$14.20/ea
$14.90/ea
$16.80/ea
$17.55/ea
$17.15/ea
Poly V Serpentine Belts
6 Rib. 66”
8 Rib. 68.5””
8 Rib. 85.5”
10 Rib. 55.5”
#4060660
#4080685
#4080855
#4100555
$31.65/ea
$42.10/ea
$41.70/ea
$15.25/ea
Radiator/Coolant hose. Priced per inch
2”
#57232
2-1/4” #57236
2-1/2” #57240
$1.70
$1.95
$2.10
Hy-T Heater Hose. Priced per inch
1/2”
#65020
$0.70
5/8”
#65023
$0.75
3/4”
#65026
$0.90
Hi-Miler Heater Hose. Priced per foot
5/8”
#65031
$2.95
3/4”
#65033
$3.70
1”
#65035
$4.90
4” ID/OD, 6” L
5” ID/OD, 8” L
45 Bend
#GRL445-0606A $24.50/ea
#GRL545-0808A $28.00/ea
4” ID/OD, 10” L
4” ID/OD, 12” L
5” ID/OD, 10” L
5” ID/OD, 18” L
90o Bend
#GRL490-1010A
#GRL490-1212A
#GRL590-1010A
#GRL590-1818A
#9003206
#9003208
$0.70
$0.85
Chromed Curved Stacks
4” ID x 36” L
5” ID x 18” L
5” ID x 36” L
#GRK4-36EXC
#GRK5-18EXC
#GRK5-36EXC
$84.90/ea
$55.00/ea
$79.30/ea
Problem Solver Part: Universal Patch Muffler
Can be used Side-in/End-out or End-in/Side-out
set-ups. Confused? Just know that you decide
the configuration of your muffler. All you need
to figure out is the inlet diameter.
Cut a hole where you want the side outlet and
weld on. 10” muffler is rated up to 10 liter
engines.
Patches sold separately.
4” ID
5” ID
Mufflers
#GRESM-436
#GRESM-536
$142.15/ea
$147.30/ea
4” ID
5” ID
Patches
#GRESP-4
#GRESP-5
$39.10/ea
$39.10/ea
Committed to serving you since 1923
MalmbergTruck.com
$24.45/ea
$22.70/ea
$27.85/ea
$25.90/ea
Double Saddle Clamps. Zinc plated
4”
GRHD-4ZN
$4.55/ea
5”
GRHD-5ZN
$5.30/ea
Air Brake Hose. Priced per foot
3/8”
1/2”
$4.50
$5.80
$7.05
Aluminized Elbows
V Belts .531” Top Width
37.5”
38.5”
42.5”
44.5”
52.5”
56”
57”
#GRS3-120SBA
#GRS4-120SBA
#GRS5-120SBA
90
Years
Spotlight on: Malmberg Spring Shop
Eric & Jason @ 613-741-3360
1621 Michael Street
Springs@MalmbergTruck.com
Did you know? Malmberg Truck has been in the Heavy Duty spring business since its early days on Preston Street. To this day, it’s still an integral part of our business and we remain
the leaders in the market. Backed by our two resident experts, Eric Vardon and Jason Belland, we can repair or fabricate you leaf springs at our in-house spring shop on Michael
Street. Most springs can be same-day turnaround.
And we don’t use off-shore white-box parts either: Dallas Springs, American Steel, Eagle
suspension, Standen’s from Canada. Genuine Hendrickson distributor. Atro polyurethane
bushings. How do we keep our prices so close?
Torque arms. Walking beams. Made to order U-bolts. Have a loaded pick-up that sags? We
sell and install SuperSprings. So, where do you go in spring-time? Malmberg’s!
Trailer Springs
Canadian Made
Since 1924
3 Leaf, 1,750lbs. 23-1/3”
#T1750-3L
$18.00/ea
4 Leaf, 2,500lbs. 25-1/4”
#T1763-4L
$20.00/ea
5 Leaf, 2,750lbs. 25-1/4”
#T1764-5L
$25.00/ea
5 Leaf Slipper, 3,500lbs. 26”
#120-3T3-5L
$31.00/ea
Spring shop techs Al Burd and Paul Dagenais
at the Preston St shop, circa 1950’s
Supplier Profile:
Eaton Aeroquip hoses and fittings
Malmberg is your Premier Eaton
Aeroquip distributor in Ottawa. Our
Michael Street and Gatineau
locations have the people and the equipment necessary to
custom-fabricate your hoses while you wait. If you can’t bring
your hose in, our in-house resident expert David Hickey has 41
years experience and can work with you to figure it out
What is it we do? AQP Transmission lines, air & hydraulics,
power steering, A/C, etc. Pressure hoses from 1,500 to
5,000psi. 1, 2 and 4 wires. Metric and British Standard Pipe fittings including Kubota, Hitachi and
HIab among others.
Where else than at Malmberg
Head Office
HD Parts & Service
1621 Michael Street
Powertrain Division
Driveline & Steering
1427 Michael Street
Truck Equipment
Sales, Parts & Service
25 Slack Road
Gatineau Location
HD Parts Store
1-195 rue Deveault
613-741-3360
613-521-3555
613-226-1320
819-483-9739
All applicable taxes extra. Some items may not be in stock at all stores. We reserve the right to limit quantities. Some items while quantities last.
Committed to serving you since 1923
MalmbergTruck.com
90
Years