skyplume g1-elmv and ellv
Transcription
skyplume g1-elmv and ellv
Laboratory Exhaust Systems SKYPLUME G1-ELMV & ELLV FRP CONSTRUCTION 233%-266% Induction Rates Fourteen Sizes Ranging from 150 to 542 • Volumes up to 61,100 CFM per fan • Static Pressures up to 6" W.G. • • SKYPLUME G1-ELMV AND ELLV Centrifugal Configuration AMCA 260 Tested Plasticair’s SKYPLUME G1‐ELMV & ELLV – DMF series of FRP Lab Exhaust Fans have been specifically designed for exposure to gas streams containing corrosive fumes. The rugged mixed flow impeller and robust housing offer favourable features such as corrosion resistant FRP construction for all gas contact parts. These units operate at high efficiencies while maintaining a quiet operation. Industries such as Waste Water Treatment, Pulp and Paper, Research Laboratories and Chemical Manufacturing will benefit from utilizing this product as it provides industrial quality, and long life. SKYPLUME G1‐ELMV & ELLV (Extended Lobe) Fans incorporate a Mixed Flow unit, conclusive with Medium and Low velocity nozzle design in addition to integral wind‐band to maximize dilution ratios. Plasticair has achieved certified induction ratios between 233%‐ 267%. This patented and enhanced design maximizes both plume height and dilution versus horsepower. Arrangement # 4 ‐ direct drive option is available and it AMCA certified. Our construction is comprised of a UV stable FRP, which provides maximum corrosion resistance and strength. All of Plasticair’s standard designs meet a 125 MPH (201 kmh) wind load. 150 MPH (241 kmh) wind load construction is available upon request. Plasticair Inc. certifies that the SKYPLUME‐G1‐ELMV ‐ DMF and ELLV ‐ DMF laboratory exhaust model shown herein are licences to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA publication 211 and publication 311 and comply with the requirements of the AMCA Certified Ratings Program. The AMCA Certified Ratings Seal applies to Induced Flow Fan Air and Sound Performance (AMCA standard 260). Exploded view Wheel Construction The SKYPLUME G1‐ ELMV & ELLV ‐ DMF series impeller is of a high efficiency non‐ overloading design. The Mixed Flow wheel is constructed of solid vinyl ester resin and reinforcing glass. A sprocket and bushing are used for shaft attachment and are completely covered with a minimum 3/16” (5mm) of FRP lay‐up. All gas contact points are FRP, complete with corrosion barrier. Plasticair’s commitment to quality ensures that only hand lay‐up methods are utilized for fabrication. This class 2 Impeller is comfortably rated to handle 18,000 feet per minute (91.4 m/sec) tip speed. Page 2 Standard Features • • • • • • • • • Motor Located out of air stream. FRP (Rust Proof) Mixed Flow wheel design. FRP (Rust Proof) SKYPLUME stack. All FRP 0-25 flame spread per ASTM-E84. Inlet: FRP roof curb cap. 316/304 ss hardware. FRP Shaft Sleeve. Design to 125 MPH wind-load. Direct Drive Arrangement # 4 – Direct couple. Shaft and Teflon Seal: This effective design has the motor and steel shaft completely protected from exposure to the corrosive gas stream. The shaft is encapsulated with a solid FRP shaft sleeve, which protrudes out from the Teflon disk shaft seal, located on the inner tube wall. The Teflon seal and shaft sleeve are a machine fit for the elimination of leaking gas. FRP (RUST Proof) UV stable housing design: Designed for industrial and institutional applications, the housing is solid FRP throughout. All FRP exposed to the corrosive gas stream, is constructed with a resin rich corrosion barrier complete with C-veil. Airstream straightening sections are designed into the 6 ducts that extend from the exterior to the interior. These sections also are designed to allow for easy motor access. The motor is completely protected from the toxic airstream and is only exposed to outside or ambient air. Fasteners: 316 stainless steel Optional Features Inlet Plenum: • FRP Rust Proof UV Stable – 25 year wall warranty against failure do to rust and UV attack. • Single wall • Double wall with 2” insulation • Energy recovery run around coils • Bypass ss Dampers – Constructed in FRP, 316 ss, 304 ss, Aluminum epoxy coated, Galvanized. • Damper electric actuators. • Other materials of construction available: 316 ss, 304 ss, Galvanized, Mild Steel Epoxy coated. Spark Resistant Construction: • NEMA 3R disconnect switch, mounted and wired. • NEMA 3R, 7, 9 explosion proof disconnect switch, mounted and wired. • Class 1 Division Motors. • Fans are Graphite lined with grounding Kit – Spark Proof. Factory Assemble Systems: • Common rail system under Fans and Plenum - FRP coated - rust proof. • Energy recovery run around coil. • Silencer Packages: • Stainless Steel Silencer built into SKYPLUME G1 ELMV & ELLV stacks. • Stainless Steel Silencer built into bypass dampers an intake plenum. • Self-Supporting designs available up to 200 km (125 MPH) wind load. Roof Curbs: • Heavy Duty galvanized roof curbs – up to 7 gauge construction. • Vibration Isolation Packages: • 1” spring – housed and restrained. • 2” spring – housed and restrained. • Isolation dampers – constructed FRP, 316 ss, 304 ss. • Isolation dampers – Aluminum epoxy coated construction. Available Motors: VFD Ready, Premium Efficiency Mill and Chemical Duty, Explosion Proof. Flexible Inlet connections Nexus lining for use with Hydrofluoric Acid Gravity type back draft dampers Weather Cover – OSHA standard Page 3 DRIVE ARRANGEMENT 4 5 4 3 2 1 1 FAN INLINE SYSTEM Skyplume G1-ELLV System Inlet C Plenum A B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 1 FAN INLINE SYSTEM Skyplume G1-ELMV System Inlet C Plenum A B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 2 FANS INLINE SYSTEM Skyplume G1-ELLV C A Plenum System Inlet B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 2 FANS INLINE SYSTEM Skyplume G1-ELMV C Plenum A System Inlet B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 3 FANS INLINE SYSTEM Skyplume G1-ELLV C System Inlet A Plenum B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 3 FANS INLINE SYSTEM Skyplume G1-ELMV C System Inlet Plenum A B E Bypass Damper (with rainhood) DMF Fan Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 3 FANS OPPOSED SYSTEM Plenum System Inlet C A Skyplume G1-ELLV B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 3 FANS OPPOSED SYSTEM Skyplume G1-ELMV Plenum C System Inlet A B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 4 FANS INLINE SYSTEM Skyplume G1-ELLV C System Inlet Plenum A DMF Fan B E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 4 FANS INLINE SYSTEM C Skyplume G1-ELMV System Inlet A Plenum B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 4 FANS OPPOSED SYSTEM Skyplume G1-ELLV System Inlet C Plenum A B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 4 FANS OPPOSED SYSTEM Skyplume G1-ELMV System Inlet C Plenum A B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 Skyplume G1-ELLV 5 FANS OPPOSED SYSTEM C Plenum A System Inlet B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 Skyplume G1-ELMV 5 FANS OPPOSED SYSTEM C Plenum A System Inlet B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 Skyplume G1-ELLV 6 FANS OPPOSED SYSTEM System Inlet Plenum C A B DMF Fan Plenum Access Door (Optional) E Bypass Damper (with rainhood) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 Skyplume G1-ELMV 6 FANS OPPOSED SYSTEM System Inlet C A Plenum B DMF Fan E Bypass Damper (with rainhood) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 Skyplume G1-ELLV 7 FANS OPPOSED SYSTEM Plenum C System Inlet A B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 Skyplume G1-ELMV 7 FANS OPPOSED SYSTEM System Inlet C Plenum A B E DMF Fan Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 Skyplume G1-ELLV 8 FANS OPPOSED SYSTEM C Plenum System Inlet A B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 8 FANS OPPOSED SYSTEM Skyplume G1-ELMV System Inlet C Plenum A B DMF Fan E Bypass Damper (with rainhood) Plenum Access Door (Optional) D PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF PLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF PLASTICAIR INC. IS PROHIBITED. 5 4 3 2 1 PERFORMANCE DATA SKYPLUME G1‐ELMV‐18 ‐ DMF 150 1.0" S.P. Nozzle Outlet Area = 0.990 ft 1.5" S.P. 2" S.P. 2.5" S.P. 2 3" S.P. 4" S.P. MAX Speed = 3767 RPM 5" S.P. 6" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 3000 3030.3 2439 1.32 265.7 2578 1.60 265.7 2710 1.90 266.6 2851 2.26 266.55 2983 2.61 266.6 3235 3.39 265.5 3463 4.17 265.5 3677 5.00 265.5 3200 3232.3 2563 1.52 265.7 2697 1.82 265.7 2821 2.13 265.7 2952 2.48 266.55 3081 2.86 266.6 3323 3.65 265.5 3549 4.49 265.5 3757 5.32 265.5 3400 3434.3 2689 1.74 265.7 2819 2.06 265.7 2938 2.38 265.7 3054 2.72 266.55 3180 3.12 266.6 3413 3.92 266.6 3637 4.81 265.5 3600 3636.4 2818 1.99 263.0 2941 2.32 265.7 3058 2.66 265.7 3167 3.01 265.72 3282 3.39 266.6 3511 4.25 266.6 3725 5.14 265.5 3800 3838.4 2949 2.28 263.0 3065 2.61 265.7 3178 2.97 265.7 3284 3.33 265.72 3385 3.69 265.7 3609 4.58 266.6 4000 4040.4 3190 2.92 265.7 3300 3.30 265.7 3403 3.68 265.72 3501 4.06 265.7 3710 4.94 266.6 4200 4242.4 3316 3.26 265.7 3423 3.66 265.7 3524 4.05 265.72 3620 4.45 265.7 4400 4444.4 3446 3.64 263.0 3547 4.04 265.7 3645 4.46 265.72 3739 4.87 265.7 SKYPLUME G1‐ELLV‐18 ‐ DMF 150 1.0" S.P. Nozzle Outlet Area = 1.284 ft 1.5" S.P. 2.5" S.P. 2" S.P. 2 3.5" S.P. 3" S.P. MAX Speed = 3767 RPM 4" S.P. 4.5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 3900 3037.4 2916 2.02 236.0 3033 2.38 239.2 3145 2.75 239.2 3250 3.11 239.17 3356 3.50 238.1 3469 3.95 238.1 3576 4.39 238.1 3678 4.83 238.1 4000 3115.3 2979 2.14 236.0 3093 2.51 239.2 3204 2.88 239.2 3308 3.26 239.17 3407 3.64 238.1 3518 4.09 238.1 3625 4.55 238.1 3726 5.00 238.1 4100 3193.1 3042 2.27 236.0 3154 2.64 239.2 3262 3.03 239.2 3365 3.41 239.17 3463 3.80 239.2 3568 4.24 238.1 3674 4.71 238.1 4200 3271.0 3105 2.40 236.0 3214 2.78 239.2 3322 3.18 239.2 3423 3.57 239.17 3519 3.97 239.2 3619 4.40 238.1 3723 4.87 238.1 4300 3348.9 3169 2.54 236.0 3275 2.93 239.2 3381 3.33 239.2 3481 3.74 239.17 3576 4.14 239.2 3669 4.55 238.1 4400 3426.8 3232 2.69 236.0 3336 3.08 239.2 3441 3.49 239.2 3539 3.73 239.17 3634 4.32 239.2 3724 4.73 239.2 4500 3504.7 3398 3.24 236.0 3500 3.66 239.2 3598 4.08 239.17 3691 4.50 239.2 4600 3582.6 3461 3.40 236.0 3561 3.83 239.2 3657 4.26 239.17 3749 4.69 239.2 SKYPLUME G1‐ELMV‐20 ‐ DMF 165 1.0" S.P. Nozzle Outlet Area = 1.189 ft 1.5" S.P. 2" S.P. 2 3" S.P. 2.5" S.P. 4" S.P. MAX Speed = 3438 RPM 5" S.P. 6" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 3600 3027.8 2224 1.58 265.7 2351 1.92 265.7 2472 2.29 266.6 2601 2.71 266.55 2721 3.14 266.6 2951 4.07 265.5 3159 5.00 265.5 3354 6.00 265.5 3800 3196.0 2319 1.78 265.7 2442 2.14 265.7 2555 2.50 265.7 2677 2.93 266.56 2795 3.38 266.6 3018 4.33 265.5 3225 5.32 265.5 3414 6.31 265.5 4000 3364.2 2414 1.99 265.7 2533 2.37 265.7 2644 2.75 265.7 2754 3.16 266.55 2870 3.64 266.5 3086 4.60 265.5 3291 5.64 265.5 4200 3532.4 2511 2.23 263.0 2626 2.62 265.7 2734 3.02 265.7 2835 3.42 265.72 2947 3.90 266.5 3157 4.90 266.6 3358 5.97 265.5 4400 3700.6 2610 2.50 263.0 2720 2.90 265.7 2825 3.31 265.7 2924 3.73 265.72 3024 4.18 266.5 3232 5.23 266.6 3425 6.30 265.5 4600 3868.8 2710 2.79 263.0 2814 3.19 265.7 2917 3.62 265.7 3013 4.06 265.72 3105 4.50 265.7 3307 5.57 266.6 4800 4037.0 2909 4.52 265.7 3009 3.95 265.7 3104 4.41 265.72 3194 4.86 265.7 3384 5.92 266.6 5000 4205.2 3005 3.83 265.7 3103 4.31 265.7 3195 4.78 265.72 3283 5.26 265.7 SKYPLUME G1‐ELLV‐20 ‐ DMF 165 1.0" S.P. Nozzle Outlet Area = 1.542 ft 1.5" S.P. 2" S.P. 2.5" S.P. 2 3.5" S.P. 3" S.P. MAX Speed = 3438 RPM 4" S.P. 4.5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 4700 3048.0 2668 2.44 236.0 2775 2.88 239.2 2877 3.32 239.2 2973 3.76 239.17 3069 4.23 238.1 3171 4.76 238.1 3269 5.29 238.1 3362 5.83 238.1 4800 3112.8 2716 2.57 236.0 2821 3.01 239.2 2922 0.46 239.2 3016 3.91 239.17 3107 4.37 238.1 3209 4.91 238.1 3306 5.45 238.1 3399 6.00 238.1 4900 3177.7 2746 2.69 236.0 2867 3.14 239.2 2966 3.60 239.2 3060 4.06 239.17 3149 4.52 239.2 3247 5.06 238.1 3343 5.61 238.1 3436 6.17 238.1 5000 3242.5 2812 2.83 236.0 2913 3.28 239.2 3011 3.75 239.2 3104 4.22 239.17 3192 4.69 239.2 3285 5.21 238.1 3381 5.78 238.1 5100 3307.4 2860 2.96 236.0 2959 3.42 239.2 3056 3.90 239.2 3148 4.38 239.17 3236 4.86 239.2 3324 5.37 238.1 3419 5.95 238.1 5200 3372.2 2909 3.10 236.0 3005 3.57 239.2 3101 4.06 239.2 3192 4.55 239.17 3279 5.04 239.2 3362 5.53 238.1 5300 3437.1 2957 3.25 236.0 3052 3.72 239.2 3147 4.22 239.2 3237 4.72 239.17 3323 5.22 239.2 3405 5.72 239.2 5400 3501.9 3099 3.88 236.0 3192 4.39 239.2 3281 4.89 239.17 3366 5.40 239.2 Notes: 1. Perofrmance Installation Type C: Ducted Inlet, Free Outlet. 2. Power Rating (watts, kW, bhp) does not include transmission losses. 3. Performance Ratings do not include the effects of appurtenances (accersories) 4. Performance Ratings do not include the effects of Crosswinds. PERFORMANCE DATA SKYPLUME G1‐ELMV‐22 ‐ DMF 182 1.0" S.P. Nozzle Outlet Area = 1.491 ft 1.5" S.P. 2" S.P. 2.5" S.P. 2 MAX Speed = 3090 RPM 3" S.P. 4" S.P. 5" S.P. 6" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 4500 3018.1 2014 2.00 265.7 2128 2.43 265.7 2235 2.87 266.6 2350 3.40 266.55 2457 3.94 266.6 2663 5.09 265.5 2850 6.26 265.5 3025 7.49 265.5 4700 3152.2 2083 2.20 265.7 2194 2.64 265.7 2295 3.09 265.7 2405 3.62 266.55 2512 4.18 266.6 2712 5.35 265.5 2898 6.58 265.5 3068 7.80 265.5 4900 3286.4 2152 2.41 265.7 2260 2.88 265.7 2360 3.34 265.7 2461 3.86 266.55 2566 4.44 266.6 2761 5.62 265.5 2946 6.90 265.5 5200 3487.6 2257 2.76 263.0 2361 3.25 265.7 2458 3.74 265.7 2549 4.24 265.72 2649 4.83 266.6 2839 6.07 266.6 3019 7.39 265.4 5500 3688.8 2366 3.17 263.0 2463 3.66 265.7 2557 4.18 265.7 2646 4.70 265.72 2734 5.26 266.6 2920 6.56 266.6 5800 3890.0 2474 3.61 263.0 2566 4.11 265.7 2658 4.66 265.7 2744 5.21 265.72 2825 5.76 265.7 3002 7.08 266.6 6100 4091.2 2670 4.59 265.7 2759 5.17 265.7 2843 5.75 265.72 2923 6.33 265.7 3086 7.62 266.6 6400 4292.4 2776 5.13 263.0 2861 5.73 265.7 2943 6.34 265.72 3021 6.94 265.7 2 Nozzle Outlet Area = 1.934 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELLV‐22 ‐ DMF 182 1.0" S.P. 1.5" S.P. 2" S.P. MAX Speed = 3090 RPM 3.5" S.P. 4" S.P. 4.5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 5850 3024.8 2414 3.08 266.0 2506 3.60 239.2 2597 4.15 239.2 2683 4.71 239.17 2768 5.28 238.1 2860 5.94 238.1 2947 6.60 238.1 3031 7.27 238.1 6000 3102.4 2462 3.25 236.0 2555 3.80 239.2 2645 4.37 239.2 2730 4.93 239.17 2811 5.49 239.2 2901 6.16 238.1 2988 6.84 238.1 3071 7.52 238.1 6150 3179.9 2514 3.45 236.0 2605 4.01 239.2 2694 4.58 239.2 2778 5.16 239.17 2858 5.74 239.2 2942 6.39 238.1 3029 7.09 238.1 6300 3257.5 2567 3.65 236.0 2656 4.22 239.2 2743 4.81 239.2 2826 5.40 239.17 2905 6.00 239.2 2984 6.62 238.1 3070 7.34 238.1 6450 3335.1 2620 3.86 236.0 2706 4.44 239.2 2792 5.05 239.2 2874 5.65 239.17 2952 6.26 239.2 3026 6.87 239.2 6600 3412.6 2672 4.08 236.0 2757 4.67 239.2 2841 5.29 239.2 2922 5.91 239.17 2999 6.53 239.2 3073 7.15 239.2 6750 3490.2 2808 4.91 236.0 2891 5.54 239.2 2971 6.18 239.17 3047 6.81 239.2 6900 3567.7 2860 5.16 236.0 2941 5.80 239.2 3020 6.45 239.17 2 Nozzle Outlet Area = 1.826 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELMV‐24 ‐ DMF 200 1.0" S.P. 2" S.P. 1.5" S.P. 4" S.P. MAX Speed = 2806 RPM 5" S.P. 6" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 5800 3176.3 1918 2.77 265.7 2017 3.32 265.7 2109 3.87 265.7 2206 4.51 266.55 2302 5.20 266.6 2482 6.63 265.5 2650 8.14 265.5 2804 9.65 265.5 6000 3285.9 1970 2.99 265.7 2068 3.56 265.7 2158 4.13 265.7 2248 4.74 266.55 2343 5.45 266.6 2519 6.90 265.5 2686 8.46 265.5 6200 3395.4 2022 3.22 265.7 2118 3.81 265.7 2207 4.39 265.7 2290 4.99 266.55 2384 5.72 266.6 2557 7.19 266.6 2722 8.79 265.5 6400 3504.9 2076 3.47 263.0 2169 4.07 265.7 2256 4.67 265.7 2338 5.28 265.72 2426 5.99 266.6 2597 7.51 266.6 2759 9.12 265.5 6800 3724.0 2184 4.03 263.0 2271 4.63 265.7 2355 5.27 265.7 2435 5.92 265.72 2510 6.57 266.6 2679 8.18 266.6 7200 3943.0 2374 5.25 265.7 2456 5.93 265.7 2533 6.61 265.72 2606 7.29 265.7 2761 8.08 266.6 7600 4162.1 2478 5.92 265.7 2558 6.64 265.7 2633 7.37 265.72 2704 8.09 265.7 8000 4381.2 2586 6.71 263.0 2660 7.42 265.7 2733 8.18 265.72 2803 8.94 265.7 2 Nozzle Outlet Area = 2.369 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELLV‐24 ‐ DMF 200 1.0" S.P. 1.5" S.P. 2" S.P. 3.5" S.P. MAX Speed = 2806 RPM 4" S.P. 4.5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 7200 3039.3 2217 3.85 236.0 2302 4.51 239.2 2384 5.19 239.2 2462 5.86 239.17 2536 6.55 238.1 2619 7.36 238.1 2698 8.18 238.1 2774 8.99 238.1 7400 3123.7 2269 4.10 236.0 2352 4.78 239.2 2433 5.47 239.2 2509 6.17 239.17 2582 6.87 239.2 2660 7.66 238.1 2739 8.50 238.1 7600 3208.1 2321 4.37 236.0 2402 5.06 239.2 2482 5.77 239.2 2557 6.49 239.17 2629 7.20 239.2 2702 7.97 238.1 2780 8.83 238.1 7800 3292.5 2374 4.65 236.0 2453 5.35 239.2 2531 6.08 239.2 26051 6.82 239.17 2676 7.55 239.2 2744 8.29 238.1 8000 3377.0 2426 4.95 236.0 2503 5.66 239.2 2580 6.41 239.2 2654 7.16 239.17 2723 7.91 239.2 2790 8.67 239.2 8200 3461.4 2555 5.98 236.0 2630 6.75 239.2 2702 7.52 239.17 2771 8.29 239.2 8400 3545.8 2606 6.32 236.0 2680 7.09 239.2 2751 7.88 239.17 8600 3630.2 2658 6.67 236.0 2730 7.46 239.2 2800 8.27 239.2 Notes: 1. Perofrmance Installation Type C: Ducted Inlet, Free Outlet. 2. Power Rating (watts, kW, bhp) does not include transmission losses. 3. Performance Ratings do not include the effects of appurtenances (accersories) 4. Performance Ratings do not include the effects of Crosswinds. PERFORMANCE DATA 2 Nozzle Outlet Area = 2.242 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELMV‐27 ‐ DMF 222 1.0" S.P. 2" S.P. 1.5" S.P. 4" S.P. MAX Speed = 2546 RPM 5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM 6800 3033.0 1693 3.12 265.7 1785 3.76 265.7 1870 4.41 265.7 1963 5.20 266.55 2051 6.01 266.6 2218 7.72 265.5 7200 3211.4 177 3.53 265.7 1860 4.22 265.7 1942 4.90 265.7 2026 5.66 266.55 2112 6.51 266.6 2273 8.26 265.5 7600 3389.8 1849 3.99 263.0 1935 4.71 265.7 2015 5.43 265.7 2090 6.15 265.72 2174 7.04 266.6 2331 8.84 8000 3568.2 1929 4.53 263.0 2011 5.25 265.7 2089 6.01 265.7 2162 6.77 265.72 2237 7.60 266.6 2391 9.49 8400 3746.7 2010 5.11 263.0 2088 5.83 265.7 2164 6.63 265.7 2235 7.43 265.72 2303 8.22 265.7 2452 10.17 266.6 8800 3925.1 2165 6.46 265.7 2239 7.30 265.7 2309 8.13 265.72 2375 8.97 265.7 2514 10.89 266.6 9200 4103.5 2243 7.14 265.7 2315 8.01 265.7 2383 8.89 265.72 2448 9.76 265.7 9600 4281.9 2323 7.91 263.0 2392 8.78 265.7 2458 9.69 265.72 2522 10.60 265.7 2 Nozzle Outlet Area = 2.907 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELLV‐27 ‐ DMF 222 1.0" S.P. 2" S.P. 1.5" S.P. 3.5" S.P. 6" S.P. BHP E.R. (%) RPM BHP E.R. (%) 2372 9.50 265.5 2513 11.27 265.5 2425 10.13 265.5 266.6 2480 10.79 265.5 266.6 2535 11.46 265.5 MAX Speed = 2546 RPM 4" S.P. 4.5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 8800 3027.2 2022 4.74 236.0 2099 5.55 239.2 2174 6.38 239.2 2244 7.21 239.17 2310 8.03 239.2 2385 9.03 238.1 2457 10.02 238.1 2525 11.02 238.1 9000 3096.0 2061 5.00 236.0 2137 5.82 239.2 2210 6.67 239.2 2279 7.51 239.17 2345 8.36 239.2 2416 9.33 238.1 2487 10.35 238.1 9200 3164.8 2100 5.27 236.0 2174 6.10 239.2 2246 6.97 239.2 2315 7.83 239.17 2380 8.70 239.2 2447 9.63 238.1 2518 10.68 238.1 9400 3233.6 2139 5.55 236.0 2212 6.39 239.2 2283 7.27 239.2 2351 8.16 239.17 2415 9.04 239.2 2478 9.95 238.1 9600 3302.4 2179 5.83 236.0 2249 6.69 239.2 2320 7.59 239.2 2387 8.50 239.17 2451 9.40 239.2 2512 10.30 239.2 9800 3371.2 2218 6.13 236.0 2287 7.00 236.0 2357 7.92 239.2 2423 8.84 239.17 2486 9.77 239.2 10000 3440.0 2326 7.33 236.0 2394 8.26 239.2 2459 9.20 239.17 2522 10.14 239.2 10200 3508.8 2365 7.67 236.0 2431 8.61 239.2 2496 9.57 239.17 2 Nozzle Outlet Area = 2.738 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELMV‐30 ‐ DMF 245 1.0" S.P. 1.5" S.P. 2" S.P. 4" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM 8400 3067.9 1525 3.85 265.7 1608 4.65 265.7 1684 5.45 265.7 1768 6.43 266.55 1847 7.42 266.6 8800 3214.0 1581 4.27 265.7 1661 5.10 265.7 1736 5.94 265.7 1813 6.88 266.55 1891 7.92 266.6 9200 3360.1 1638 4.71 265.7 1716 5.59 265.7 1789 6.46 265.7 1859 7.36 266.55 1936 8.45 9600 3506.2 1696 5.21 263.0 1772 6.10 265.7 1843 7.01 265.7 1910 7.92 265.72 1982 8.99 10000 3652.3 1755 5.76 263.0 1827 6.66 265.7 1897 7.60 265.7 1962 8.55 265.72 2028 10400 3798.4 1814 6.35 263.0 1883 7.25 265.7 1951 8.23 265.7 2016 9.22 265.72 10800 3944.5 1940 7.87 265.7 2006 8.90 265.7 2069 9.92 265.72 11200 4090.6 1996 8.54 265.7 2062 9.60 265.7 2123 10.67 265.72 1.0" S.P. 1.5" S.P. 2" S.P. 6" S.P. BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 1997 9.54 265.5 2135 11.73 265.5 2262 13.93 265.5 2037 10.07 265.5 2174 12.37 265.5 266.6 2078 10.62 266.6 2232 13.02 265.5 266.5 2122 11.26 266.6 2253 13.68 265.5 9.56 266.6 2166 11.93 266.6 2077 10.20 265.7 2211 12.61 266.6 2129 10.95 265.7 2256 13.32 266.6 2182 11.73 265.7 2 Nozzle Outlet Area = 3.551 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELLV‐30 ‐ DMF 245 MAX Speed = 2292 RPM 5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM 10700 3013.2 1797 5.65 236.0 1867 6.64 239.2 1934 7.64 239.2 1998 8.65 239.17 11000 3097.7 1839 6.03 236.0 1908 7.03 239.2 1974 8.07 239.2 2037 9.10 239.17 11300 3182.2 1882 6.42 236.0 1949 7.45 239.2 2014 8.51 239.2 2076 9.58 11600 3266.7 1925 6.84 236.0 1990 7.88 239.2 2054 8.97 239.2 2115 11900 3351.2 1968 7.27 236.0 2031 8.33 239.2 2094 9.45 239.2 2155 12200 3435.7 2073 8.81 236.0 2135 9.95 239.2 12500 3520.1 2115 9.31 236.0 2176 10.47 12800 3604.6 2157 9.83 236.0 2216 11.01 3.5" S.P. MAX Speed = 2292 RPM 4" S.P. 4.5" S.P. BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 2060 9.69 238.1 2128 10.90 238.1 2193 12.11 238.1 2255 13.32 238.1 2096 10.14 239.2 2162 11.35 238.1 2226 12.59 238.1 2288 13.84 238.1 239.17 2135 10.64 239.2 2196 11.80 238.1 2260 13.08 238.1 10.06 239.17 2173 11.16 239.2 2230 12.28 238.1 10.57 239.17 2212 11.69 239.2 2267 12.81 239.2 2194 11.10 239.17 2251 12.25 239.2 239.2 2234 11.65 239.17 2290 12.82 239.2 239.2 2274 12.21 239.17 Notes: 1. Perofrmance.Installation.Type.C: Ducted Inlet, Free Outlet. 2. Power Rating (watts, kW, bhp) does not include transmission losses. 3. Performance Ratings do not include the effects of appurtenances (accersories) 4. Performance Ratings do not include the effects of Crosswinds. PERFORMANCE DATA 2 Nozzle Outlet Area = 3.376 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELMV‐33 ‐ DMF 270 1.5" S.P. 1.0" S.P. 2" S.P. 4" S.P. MAX Speed = 2083 RPM 5" S.P. 6" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 10200 3021.3 1390 4.70 265.7 1465 5.66 265.7 1534 6.63 265.7 1534 6.63 265.72 1682 9.02 266.6 1818 11.59 265.5 1947 14.25 265.5 2059 16.91 265.5 10700 3169.4 1443 5.22 265.7 1516 6.23 265.7 1583 7.25 265.7 1583 7.25 265.72 1724 9.65 266.6 1856 12.26 265.5 1980 15.05 265.5 11200 3317.5 1496 5.78 265.7 1567 6.84 265.7 1633 7.91 265.7 1633 7.91 265.72 1766 10.31 266.6 1894 12.96 266.6 2017 15.86 265.5 11700 3465.6 1551 6.42 263.0 1619 7.50 265.7 1684 8.61 265.7 1684 8.61 265.72 1809 11.00 266.6 1936 13.77 266.6 2055 16.69 265.5 12200 3613.7 1606 7.11 263.0 1672 8.20 265.7 1735 9.35 265.7 1735 9.35 265.72 1852 11.71 266.6 1977 14.60 266.6 12700 3761.8 1662 7.86 263.0 1724 8.95 265.7 1786 10.15 265.7 1786 10.15 265.72 1899 12.56 265.7 2019 15.46 266.6 13200 3910.0 1777 9.74 265.7 1838 10.99 265.7 1838 10.99 265.72 1949 13.50 265.7 2062 16.36 266.6 13700 4058.1 1831 10.59 265.7 1890 11.89 265.7 1890 11.89 265.72 1999 14.49 265.7 2 Nozzle Outlet Area = 4.379 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELLV‐33 ‐ DMF 270 1.0" S.P. 1.5" S.P. 2" S.P. 3.5" S.P. MAX Speed = 2083 RPM 4" S.P. 4.5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 13500 3082.9 1692 7.54 236.0 1754 8.77 239.2 1814 10.04 239.2 1870 10.75 239.17 1924 12.58 239.2 1924 12.58 239.2 2040 15.55 238.1 13800 3151.4 1735 8.09 236.0 1785 9.19 239.2 1844 10.49 239.2 1900 11.79 239.17 1953 13.09 239.2 1953 13.09 239.2 2065 16.04 238.1 14100 3219.9 1778 8.66 236.0 1816 9.63 239.2 1874 10.96 239.2 1929 12.28 239.17 1982 13.61 239.2 1982 13.61 239.2 14400 3288.4 1789 8.80 236.0 1847 10.08 239.2 1904 11.44 239.2 1959 12.79 239.17 2011 14.15 239.2 2011 14.15 239.2 14700 3356.9 1878 10.56 236.0 1935 11.94 239.2 1989 13.32 239.17 2040 14.70 239.2 2040 14.70 239.2 15000 3425.4 1910 11.05 236.0 1965 12.45 239.2 2018 13.86 239.17 2069 15.27 239.2 2069 15.27 239.2 15300 3493.9 1941 11.57 236.0 1996 12.98 239.2 2048 14.42 239.17 15600 3562.5 1973 12.09 236.0 2026 13.53 239.2 2078 14.99 239.17 2 Nozzle Outlet Area = 4.053 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELMV‐36 ‐ DMF 300 1.0" S.P. 1.5" S.P. 2" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM 12200 3010.1 1235 5.47 265.7 1304 6.63 265.7 1368 7.81 266.6 12950 3195.2 1294 6.23 265.7 1360 7.46 265.7 1421 8.69 265.7 13700 3380.2 1353 7.07 265.7 1417 8.37 265.7 1477 9.67 14450 3565.3 1413 8.04 263.0 1475 9.36 265.7 1533 10.73 15200 3750.3 1475 9.10 263.0 1533 10.43 265.7 1589 15950 3935.4 1591 11.60 265.7 16700 4120.4 1650 12.85 265.7 17450 4305.5 1711 14.26 263.0 MAX Speed = 1884 RPM 5" S.P. BHP E.R. (%) 6" S.P. BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 1438 9.26 266.55 1504 10.70 266.6 1628 13.81 265.5 1742 16.99 265.5 1848 20.28 265.5 1485 10.10 266.55 1550 11.63 266.6 1670 14.81 265.5 1783 18.19 265.5 265.7 1533 10.99 266.55 1597 12.61 266.6 1713 15.85 266.6 1824 19.40 265.5 265.7 1587 12.10 265.72 1644 13.65 266.6 1758 17.06 266.6 1866 20.65 265.5 11.87 265.7 1642 13.32 265.72 1693 14.76 265.7 14992 17.28 266.6 1646 13.11 265.7 1698 14.62 265.72 1747 16.13 265.7 1852 19.65 266.6 1704 14.44 265.7 1754 16.02 265.72 1803 17.60 265.7 1762 15.86 265.7 1811 17.52 265.72 1858 19.17 265.7 2 Nozzle Outlet Area = 5.257 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELLV‐36 ‐ DMF 300 1.0" S.P. 4" S.P. RPM 1.5" S.P. 2" S.P. 3.5" S.P. MAX Speed = 1884 RPM 4" S.P. 4.5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP 15800 3005.5 1474 8.32 236.0 1532 977.00 239.2 1587 11.26 239.2 1639 12.75 239.17 1691 14.29 238.1 1747 16.08 238.1 1800 17.86 238.1 1851 19.65 238.1 16150 3072.1 1501 8.75 236.0 1558 10.23 239.2 1613 11.75 239.2 1665 13.27 239.17 1714 14.79 239.2 1769 16.60 238.1 1822 18.42 238.1 1872 20.25 238.1 16500 3138.7 1529 9.21 236.0 1584 10.71 239.2 1639 12.26 239.2 1690 13.81 239.17 1738 15.37 239.2 1790 17.12 238.1 1843 18.99 238.1 16850 3205.3 1557 9.68 236.0 1611 11.20 239.2 1664 12.79 239.2 1715 14.37 239.17 1763 15.96 239.2 1813 17.67 238.1 1862 19.49 238.1 17200 3271.8 1584 10.17 236.0 1638 11.71 239.2 1690 13.33 239.2 1741 14.95 239.17 1788 16.56 239.2 1835 18.22 238.1 17550 3338.4 1612 10.67 236.0 1664 12.24 239.2 1732 14.21 239.2 1766 15.54 239.17 1813 17.19 239.2 1858 18.84 239.2 17900 3405.0 1640 11.19 236.0 1691 12.78 236.0 1743 14.46 239.2 1792 16.15 239.17 1838 17.83 239.2 1883 19.52 239.2 18250 3471.6 1719 13.35 236.0 1769 15.06 239.2 1817 16.77 239.17 1864 18.49 239.2 E.R. (%) RPM BHP E.R. (%) RPM Notes: 1. Perofrmance Installation Type C: Ducted Inlet, Free Outlet. 2. Power Rating (watts, kW, bhp) does not include transmission losses. 3. Performance Ratings do not include the effects of appurtenances (accersories) 4. Performance Ratings do not include the effects of Crosswinds. BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) PERFORMANCE DATA 2 Nozzle Outlet Area = 4.929 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELMV‐40 ‐ DMF 330 1.0" S.P. 1.5" S.P. 2" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM 14800 3002.6 1118 6.62 265.7 1180 8.02 265.7 15700 3185.2 1170 7.53 265.7 1231 9.02 265.7 16600 3367.8 1223 8.53 265.7 1282 10.10 17500 3550.4 1277 9.68 263.0 1333 11.28 18400 3733.0 1332 10.95 263.0 1385 19300 3915.6 20200 4098.2 21100 4280.8 4" S.P. 5" S.P. 6" S.P. BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 1239 9.47 266.6 1303 11.22 266.55 1362 12.97 266.6 1475 16.75 265.5 1579 20.61 265.5 1675 24.61 265.5 1286 10.51 265.7 1345 12.23 266.55 1403 14.08 266.6 1512 17.95 265.5 1615 22.04 265.5 265.7 1336 11.68 265.7 1388 13.29 266.36 1445 15.26 266.6 1550 19.18 266.6 1652 23.50 265.5 265.7 1386 12.94 265.7 1435 14.60 265.72 1487 16.49 266.6 1591 20.63 266.6 1689 24.99 265.5 12.56 265.7 1436 14.31 265.7 1485 16.05 265.72 1530 17.80 265.7 1633 22.15 266.6 1437 13.95 265.7 1487 15.78 265.7 1534 17.61 265.72 1579 19.44 265.7 175 23.73 266.6 1490 15.44 265.7 1539 17.36 265.7 1585 19.27 265.72 1629 21.19 265.7 1544 17.11 263.0 1591 19.05 265.7 1636 21.05 265.72 1679 23.06 265.7 2 Nozzle Outlet Area = 6.393 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELLV‐40 ‐ DMF 330 1.0" S.P. 1.5" S.P. 2" S.P. 3.5" S.P. MAX Speed = 1708 RPM 4" S.P. 4.5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 19200 3003.3 1336 10.10 236.0 1388 11.87 239.2 1439 13.67 239.2 1486 15.48 239.17 1533 17.36 238.1 1583 19.53 238.1 1632 21.70 238.1 1678 23.88 238.1 19700 3081.5 1365 10.72 236.0 1416 12.53 239.2 1466 14.38 239.2 1513 16.23 239.17 1557 18.09 239.2 1607 20.27 238.1 1655 22.50 238.1 1701 24.73 238.1 20200 3159.7 1394 11.38 236.0 1445 13.21 239.2 1493 15.11 239.2 1540 17.01 239.17 1584 19.91 239.2 1630 21.03 238.1 1678 23.32 238.1 20700 3237.9 1424 12.06 236.0 1473 13.92 239.2 1521 15.87 239.2 1567 17.82 239.17 1610 19.77 239.2 1654 21.81 238.1 1701 24.15 238.1 21200 3316.1 1454 12.77 266.0 1501 14.66 239.2 1549 16.66 239.2 1594 18.65 239.17 1637 20.65 239.2 1678 22.64 239.2 21700 3394.3 1483 13.51 236.0 1530 15.44 236.0 1577 17.48 239.2 1621 19.52 239.17 1664 21.56 239.2 1704 23.60 239.2 22200 3472.5 1559 16.25 236.0 1605 18.32 239.2 1649 20.41 239.17 1690 22.50 239.2 22700 3550.8 1588 17.10 236.0 1633 19.20 239.2 1676 21.33 239.17 2 Nozzle Outlet Area = 6.026 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELMV‐44 ‐ DMF 365 1.0" S.P. 1.5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM 18200 3020.2 1016 8.20 265.7 19300 3202.8 1063 9.32 265.7 20400 3385.3 1111 10.55 21500 3567.9 1160 11.97 22600 3750.4 1210 13.54 23700 24800 25900 2" S.P. 4" S.P. MAX Speed = 1545 RPM 5" S.P. 6" S.P. BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 1072 9.92 265.7 1124 11.68 266.6 1182 13.83 266.55 1236 15.98 266.6 1337 20.62 265.5 1431 25.36 265.5 1518 30.24 265.5 1118 11.15 265.7 1168 12.98 265.7 1220 15.07 266.55 1273 17.35 266.6 1371 22.08 265.5 1464 27.11 265.5 265.7 1164 12.49 265.7 1213 14.42 265.7 1259 16.38 266.55 1311 18.80 266.6 1406 23.62 266.6 1497 28.90 265.5 263.0 1210 13.90 265.7 1258 15.98 265.7 1303 18.02 265.72 1349 20.31 266.6 1443 25.40 266.6 1531 30.73 265.5 263.0 1257 15.52 265.7 1304 17.66 265.7 1347 19.80 265.72 1389 21.95 265.7 1481 27.26 266.6 3933.0 1305 17.22 265.7 1350 19.47 265.7 1392 21.72 265.72 1433 23.96 265.7 1519 29.20 266.6 4115.5 1353 19.07 265.7 1396 21.42 265.7 1438 23.77 265.72 1478 26.12 265.7 4298.0 1402 21.13 263.0 1443 23.50 265.7 1484 25.96 265.72 1523 28.40 265.7 2 Nozzle Outlet Area = 7.815 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELLV‐44 ‐ DMF 365 1.0" S.P. 1.5" S.P. 2" S.P. 3.5" S.P. MAX Speed = 1545 RPM 4" S.P. 4.5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 23500 3007.0 1209 11.41 236.0 1257 14.55 239.2 1302 16.76 239.2 1345 18.97 239.17 1387 21.26 238.1 1433 23.92 238.1 1477 26.58 238.1 1519 29.24 238.1 24100 3083.8 1235 13.13 236.0 1282 15.34 239.2 1327 17.60 239.2 1369 19.87 239.17 1409 22.14 239.2 1454 24.81 238.1 1497 27.54 238.1 1539 30.27 238.1 24700 3160.6 1262 13.92 236.0 1307 16.16 239.2 1351 18.48 239.2 1393 20.81 239.17 1433 23.13 239.2 1475 25.72 238.1 1518 28.52 238.1 25300 3237.4 1288 14.74 236.0 1332 17.02 239.2 1376 19.40 239.2 1417 21.78 239.17 1456 24.16 239.2 1496 26.66 238.1 1538 29.52 238.1 25900 3314.1 1314 15.59 236.0 1357 17.90 239.2 1400 20.34 239.2 1441 22.78 239.17 1480 25.21 239.2 1517 27.65 239.2 26500 3390.9 1341 16.48 236.0 1383 18.83 236.0 1425 21.32 239.2 1465 23.81 239.17 1504 26.31 239.2 1541 28.80 239.2 27100 3467.7 1408 19.81 236.0 1450 22.33 239.2 1490 24.88 239.17 1528 27.43 239.2 27700 3544.5 1434 20.82 236.0 1475 23.38 239.2 1514 25.99 239.17 Notes: 1. Perofrmance Installation Type C: Ducted Inlet, Free Outlet. 2. Power Rating (watts, kW, bhp) does not include transmission losses. 3. Performance Ratings do not include the effects of appurtenances (accersories) 4. Performance Ratings do not include the effects of Crosswinds. PERFORMANCE DATA 2 Nozzle Outlet Area = 7.306 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELMV‐49 ‐ DMF 402 1.0" S.P. Nozzle Fan outlet Inlet velocity CFM FPM 1.5" S.P. 2" S.P. 4" S.P. MAX Speed = 1403 RPM 5" S.P. 6" S.P. RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 1398 38.22 265.5 23000 3148.1 953 10.88 265.7 1003 13.06 265.7 1048 15.24 265.7 1098 17.81 266.55 1146 20.53 266.6 1236 26.24 265.5 1320 32.23 265.5 24280 3323.3 994 12.27 265.7 1043 14.57 265.7 1087 16.88 265.7 1131 19.31 266.55 1179 22.18 266.6 1266 27.97 265.5 1349 34.30 265.5 25560 3498.5 1037 13.84 263.0 1083 16.21 265.7 1127 18.64 265.7 1168 21.06 265.72 1212 23.92 266.6 1298 29.97 266.6 1379 36.41 265.5 26840 3673.7 1080 15.60 263.0 1124 17.09 265.7 1166 20.54 265.7 1206 23.08 265.72 1246 25.74 266.6 1330 32.09 266.6 28120 3848.9 1123 17.52 263.0 1165 19.91 265.7 1206 22.57 265.7 1246 25.24 265.72 1283 27.91 265.7 1363 34.30 266.6 29400 4024.1 1207 21.97 265.7 1247 24.75 265.7 1285 27.55 265.72 1321 30.34 265.7 1396 36.61 266.6 30680 4199.3 1249 24.21 263.0 1288 27.10 265.7 1325 30.01 265.72 1361 32.92 265.7 32000 4380.0 1293 26.82 263.0 1330 29.69 265.7 1367 32.72 265.72 1401 35.76 265.7 2 Nozzle Outlet Area = 9.475 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELLV‐49 ‐ DMF 402 1.0" S.P. 1.5" S.P. 2" S.P. 3.5" S.P. MAX Speed = 1403 RPM 4" S.P. 4.5" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 29000 3060.7 1115 15.64 236.0 1157 18.30 239.2 1198 21.03 239.2 1237 23.76 239.17 1273 26.49 239.2 1315 29.75 238.1 1354 33.03 238.1 1392 36.32 238.1 29700 3134.6 1138 16.55 236.0 1179 19.25 239.2 1219 22.04 239.2 1258 24.84 239.17 1294 27.63 239.2 1333 30.81 238.1 1372 34.17 238.1 30400 3208.4 1161 17.49 236.0 1201 20.23 239.2 1241 23.09 239.2 1279 25.95 239.17 1314 28.81 239.2 1351 31.89 238.1 1390 35.33 238.1 31100 3282.3 1184 18.46 236.0 1223 21.25 239.2 1262 24.18 239.2 1300 27.11 239.17 1335 30.03 239.2 1369 32.99 238.1 31800 3356.2 1207 19.48 236.0 1245 22.31 239.2 1284 25.31 239.2 1321 28.30 239.17 1356 31.29 239.2 1389 34.28 239.2 32500 3430.1 1268 23.43 236.0 1306 26.47 239.2 1342 29.53 239.17 1377 32.58 239.2 33200 3504.0 1290 24.59 236.0 1327 27.67 239.2 1363 30.80 239.17 1398 33.92 239.2 33900 3577.8 1313 25.79 236.0 1349 28.92 239.2 1385 32.11 239.17 2 Nozzle Outlet Area = 8.950 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELMV‐54 ‐ DMF 445 1.0" S.P. Nozzle Fan outlet Inlet velocity CFM FPM 1.5" S.P. 2" S.P. RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 4" S.P. MAX Speed = 1267 RPM 5" S.P. 6" S.P. RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 1244 44.87 265.5 27000 3016.8 832 12.14 265.7 878 14.70 265.7 921 17.31 266.6 969 20.50 266.55 1261 43.33 265.7 1096 30.58 265.5 1173 37.62 265.5 28700 3206.7 873 13.87 265.7 917 16.59 265.7 958 19.31 265.7 1001 22.42 266.55 1044 25.81 266.6 1125 32.84 265.5 1201 40.32 265.5 30400 3396.6 913 15.78 265.7 957 18.66 265.7 997 21.54 265.7 1034 24.45 266.55 1077 28..05 266.6 1155 35.24 266.6 1229 43.09 265.5 32100 3586.6 955 18.00 263.0 996 20.92 265.7 1035 23.97 265.7 1072 27.01 265.72 1110 30.40 266.6 1186 37.99 266.6 1258 45.92 265.5 33800 3776.5 998 20.45 263.0 1036 23.38 265.7 1074 26.58 265.7 1110 29.79 265.72 1144 32.99 265.7 1218 40.88 266.6 35525 3969.3 1078 26.09 265.7 1114 29.46 265.7 1149 32.82 265.72 1182 36.19 265.7 1251 43.94 266.6 37250 4162.0 1119 29.02 265.7 1155 32.55 265.7 1189 36.09 265.72 1221 39.52 265.7 39000 4357.5 1162 32.42 263.0 1196 35.94 265.7 1229 39.64 265.72 1261 43.33 265.7 2 Nozzle Outlet Area = 11.615 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELLV‐54 ‐ DMF 445 1.0" S.P. Nozzle Fan outlet Inlet velocity CFM FPM RPM BHP 1.5" S.P. E.R. (%) RPM BHP 2" S.P. E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP 3.5" S.P. E.R. (%) RPM BHP MAX Speed = 1267 RPM 4" S.P. E.R. (%) RPM BHP 4.5" S.P. E.R. (%) RPM BHP E.R. (%) 34900 3004.7 991 18.37 236.0 1030 21.59 239.1 1068 24.87 239.2 1103 28.15 239.17 1138 31.56 238.1 1175 35.51 238.1 1211 39.46 238.1 1245 43.41 238.1 35800 3082.2 1013 19.50 236.0 1051 22.77 239.2 1088 26.14 239.2 1123 29.51 239.17 1156 32.88 239.2 1192 36.84 238.1 1228 40.90 238.1 1262 44.95 238.1 36700 3159.7 1035 20.67 236.0 1072 24.00 239.2 1108 27.46 239.2 1142 30.91 239.17 1175 34.36 239.2 1209 38.21 238.1 1245 42.37 238.1 37600 3237.2 1056 21.90 236.0 1096 25.29 239.2 1128 28.82 239.2 1162 32.36 239.17 1195 35.90 239.2 1227 39.62 238.1 1262 43.87 238.1 38500 3314.7 1078 23.18 236.0 1114 26.62 239.2 1149 30.24 239.2 1182 33.86 239.17 1214 37.49 239.2 1245 41.11 239.2 39400 3392.2 1100 24.51 236.0 1135 28.01 236.0 1169 31.71 239.2 1202 35.42 239.17 1234 39.13 239.2 1264 42.83 239.2 40300 3469.7 1156 29.48 236.0 1190 33.23 239.2 1222 37.03 239.17 1254 40.82 239.2 41200 3547.1 1177 31.00 236.0 1211 34.81 239.2 1243 38.69 239.17 Notes: 1. Perofrmance Installation Type C: Ducted Inlet, Free Outlet. 2. Power Rating (watts, kW, bhp) does not include transmission losses. 3. Performance Ratings do not include the effects of appurtenances (accersories) 4. Performance Ratings do not include the effects of Crosswinds. PERFORMANCE DATA 2 Nozzle Outlet Area = 10.954 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELMV‐60 ‐ DMF 490 1.0" S.P. Nozzle Fan outlet Inlet velocity CFM FPM 1.5" S.P. 2" S.P. 4" S.P. RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) MAX Speed = 1146 RPM 5" S.P. 6" S.P. RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 1125 54.84 265.5 33000 3012.6 752 14.82 265.7 794 17.95 265.7 833 21.15 266.6 875 25.05 266.55 915 28.95 266.6 991 37.37 265.5 1060 45.97 265.5 35000 3195.2 787 16.85 265.7 827 20.17 265.7 865 23.49 265.7 904 27.30 266.55 943 31.44 266.6 1016 40.03 265.5 1085 49.15 265.5 37000 3377.8 822 19.09 265.7 862 22.59 265.7 898 26.10 265.7 932 29.68 266.55 971 34.06 266.6 1042 42.81 266.6 1109 52.40 265.5 39000 3560.3 859 21.65 263.0 896 25.23 265.7 932 28.92 265.7 965 32.62 265.72 999 36.81 266.6 1069 46.04 266.6 1134 55.72 265.5 41000 3742.9 896 24.49 263.0 931 28.08 265.7 965 31.97 265.7 998 35.86 265.72 1029 39.75 265.7 1097 49.41 266.6 43000 3925.5 966 31.17 265.7 1000 35.25 265.7 1031 39.33 265.72 1061 43.41 265.7 1125 52.93 266.6 45000 4108.1 1002 34.51 265.7 1034 38.78 265.7 1065 43.04 265.72 1094 47.31 265.7 47000 4290.7 1038 38.24 263.0 1069 42.56 265.7 1099 47.02 265.72 1128 51.47 265.7 2 Nozzle Outlet Area = 14.207 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELLV‐60 ‐ DMF 490 1.0" S.P. Nozzle Fan outlet Inlet velocity CFM FPM 1.5" S.P. 2" S.P. RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 3.5" S.P. MAX Speed = 1146 RPM 4" S.P. 4.5" S.P. RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 42700 3005.6 897 22.48 236.0 932 26.42 239.2 966 30.43 239.2 997 34.45 239.17 1029 38.62 238.1 1063 43.46 238.1 1095 48.28 238.1 1126 53.12 238.1 43900 3090.0 918 23.99 236.0 952 28.00 239.2 985 32.13 239.2 1017 36.26 239.17 1047 40.39 239.2 1080 45.23 238.1 1112 50.20 238.1 1142 55.17 238.1 45100 3174.5 939 25.56 236.0 973 29.65 239.2 1005 33.90 239.2 1036 38.14 239.17 1066 42.38 239.2 1097 47.06 238.1 1128 52.17 238.1 46300 3259.0 961 27.22 236.0 993 31.38 239.2 1025 35.74 239.2 1056 40.09 239.17 1085 44.45 239.2 1114 48.94 238.1 1145 54.18 238.1 47500 3343.4 982 28.95 236.0 1014 33.18 239.2 1046 37.65 239.2 1076 42.12 239.17 1104 46.59 239.2 1132 51.06 239.2 48700 3427.9 1035 35.07 236.0 1066 39.64 239.2 1095 44.22 239.17 1124 48.80 239.2 49900 3512.4 1056 37.07 236.0 1086 41.70 239.2 1115 46.40 239.17 1143 51.09 239.2 51100 3596.8 1077 39.15 236.0 1106 43.85 239.2 1135 48.66 239.17 2 Nozzle Outlet Area = 13.254 ft 3" S.P. 2.5" S.P. SKYPLUME G1‐ELMV‐66 ‐ DMF 542 1.0" S.P. Nozzle Fan outlet Inlet velocity CFM FPM 1.5" S.P. 2" S.P. 4" S.P. MAX Speed = 1042 RPM 5" S.P. 6" S.P. RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) 1023 66.46 265.5 40000 3018.0 684 18.00 265.7 722 21.79 265.7 758 25.65 266.6 797 30.39 266.55 833 35.12 266.6 902 45.31 265.5 965 55.73 265.5 42500 3206.6 717 20.55 265.7 754 24.58 265.7 788 28.61 265.7 823 33.21 266.55 859 38.23 266.6 925 48.64 265.5 987 59.71 265.5 45000 3395.2 751 23.36 265.7 786 27.63 265.7 819 31.90 265.7 850 36.20 266.55 885 4.52 266.6 949 52.16 266.6 1011 63.78 265.5 47500 3583.8 785 26.62 263.0 819 30.95 265.7 851 35.46 265.7 881 39.96 265.72 912 44.98 266.6 975 56.22 266.6 1034 67.95 265.5 50650 3821.5 829 31.21 263.0 860 35.55 265.7 891 40.35 265.7 920 45.16 265.72 948 49.96 265.7 1008 61.59 266.6 53800 4059.2 902 40.64 265.7 932 45.75 265.7 960 50.85 265.72 987 55.95 265.7 1042 67.28 266.6 56950 4296.8 945 46.43 263.0 973 51.66 265.7 1000 57.06 265.72 1026 62.46 265.7 60100 4534.5 988 52.99 263.0 1015 58.12 265.7 1041 63.82 265.72 2 Nozzle Outlet Area = 17.191 ft 2.5" S.P. 3" S.P. SKYPLUME G1‐ELLV‐66 ‐ DMF 542 1.0" S.P. Nozzle Fan outlet Inlet velocity CFM FPM 1.5" S.P. 2" S.P. 3.5" S.P. MAX Speed = 1042 RPM 4" S.P. RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP E.R. (%) RPM BHP 4.5" S.P. E.R. (%) RPM BHP E.R. (%) 52000 3024.8 820 27.61 236.0 851 32.40 239.2 882 37.29 239.2 911 42.18 239.17 939 47.18 238.1 970 53.06 238.1 999 58.95 238.1 1027 64.84 238.1 53300 3100.5 837 29.26 236.0 868 34.13 239.2 898 39.14 239.2 927 44.15 239.17 954 49.17 239.2 983 55.01 238.1 1013 61.04 238.1 1040 67.07 238.1 54600 3176.1 854 30.97 236.0 885 35.92 239.2 914 41.06 239.2 942 46.40 239.17 969 51.33 239.2 997 56.99 238.1 1026 63.17 238.1 55900 3251.7 872 32.76 236.0 901 39.79 239.2 931 43.05 239.2 958 48.31 239.17 985 53.57 239.2 1011 59.03 238.1 1040 65.35 238.1 57200 3327.3 889 34.62 236.0 918 39.73 239.2 947 45.11 239.2 974 50.49 239.17 1001 55.87 239.2 1026 61.25 239.2 58500 3402.9 907 36.56 236.0 935 41.75 236.0 963 47.24 239.2 991 52.75 239.17 1016 58.25 239.2 1041 63.76 239.2 59800 3478.6 952 43.88 236.0 980 49.45 239.2 1007 55.08 239.17 1032 60.71 239.2 61100 3554.2 969 46.09 236.0 997 51.74 239.2 1023 57.49 239.17 Notes: 1. Perofrmance Installation Type C: Ducted Inlet, Free Outlet. 2. Power Rating (watts, kW, bhp) does not include transmission losses. 3. Performance Ratings do not include the effects of appurtenances (accersories) 4. Performance Ratings do not include the effects of Crosswinds. Plasticair Inc., Servicing Industry FRP Fans Scrubbing Equipment Laboratory Fumehoods Plasticair Product List Scrubbers: Horizontal Packed Bed - Single/Double (HS-Series) Vertical Packed Bed Towers (VS-Series) Odour Control Scrubbers (HCS, VCS-Series) Demisters - Vane Type (P-Series) Demisters - Mesh Type (M-Series) Demisters - Multiple Stage Type (E-Series) Venturi Scrubbers (ECE-Series) Laboratory Fume Hood Scrubbers (FHS-Series) Plasticair’s Sales Forces are located in major cities around the world. Scrubber Applications: Oil/Air Separators Chlorine Scrubbers Micro Chip Manufacturing Scrubbers Plating Plant Scrubbers Pickling Line Scrubbers Chromic Acid Scrubbers And Demisters FRP Fans: Axial Fans - Vane / Tube Panel Fans - Wall Mount / Box Mount Inline Centrifugal - Backward Curved Laboratory Fans - B.I. Utility Sets / B.I. Tubular High Pressure Fans - Radial Blade Medium Pressure Fans - Radial Blade Medium Pressure Fans - Backward Curved Mini Industrial Vent Sets - Radial Blade / B.I. Contact the factory for the agent closest to you. Your Local Plasticair Representative is: Bulletin # 132 December 2014 Plasticair Inc. 1275 CRESTLAWN DRIVE, MISSISSAUGA, ONTARIO, CANADA L4W 1A9 TEL: (905) 625-9164 F A X : (905) 625-0147 Email: sales@plasticair.com • Web Page: www.plasticair.com