2016 Catalog

Transcription

2016 Catalog

TWO DECADES OF DEDICATION TO EXCELLENCE, QUALITY & DOMINATING PERFORMANCE
COMPANY INTRO
The roots of Speedwerx go back to the 80’s and 90’s, when owner Steve Houle was
designing and building parts for his own race sleds. His innovative ideas spoke
for themselves as he proved to be a dominating force in snowmobile racing, winning many races and multiple world championships along the way. Soon other competitors and consumers were asking for their own race-proven parts, and that led to the
creation of the Hot Seat Performance brand in 1994, and the Speedwerx brand in 1999.
For over 20 years, the Speedwerx family has been committed to winning. Whether it is on the race track with our own machines, or helping our customers achieve their goals with our products, Speedwerx is a proven winner in many different
racing disciplines including Snowmobiles, ATV’s, UTV’s, PWC’s, and our newest venture, Dirt Track Racing Cars. With 69
World and National titles, 24 X-Games Medals (10 Gold!), and Thousands of trips to Victory Lane, Speedwerx is known and
respected worldwide as an industry icon that sets the bar when it comes to performance, quality, and service.
The staff here at Speedwerx takes pride in our work and the products we manufacture. Most of our products are made
right here in the USA and we feel that this is as important to our customers as it is to us. Our products are designed to perform in the toughest and most demanding conditions, and are thoroughly tested with thousands of laps on the track and
thousands of miles on the trails and in the backcountry every year. If you’re searching for the best performing and highest
quality parts for your Arctic Cat Snowmobile, ATV, UTV, or your Dirt Track Race Car, look no further than Speedwerx.
So go ahead and page through the new catalog. If you have any questions please let us know right away. We can be
reached via phone @ 651-982-6020 from 8-5 M-F CST, we are also available via email at tech@speedwerx.com . Don’t forget to check out our new website as well at www.speedwerx.com There you can order online, check for product updates
and get technical support as well. Thank you for choosing Speedwerx !
OUR NEW WEBSITE
You may have noticed that we re-designed our website. If not, check it out today! We will have special deals on the hottest performance products available.
There are also tons of videos and resources for you to browse. Be sure to friend us on facebook and follow us on twitter to stay in touch with us.
GET SOCIAL WITH US
Like us, friend us, follow us...
Stay connected with Speedwerx, Inc.
www.speedwerx.com
SIGN-UP
TO GET
NEWS!
SNOWMOBILE PERFORMANCE
SEASON HIGHLIGHTS / GET CONNECTED
1
4000 MODELS HOT PRODUCTS
2
3
6000 R SX MODELS HOT PRODUCTS
4
5
800/8000 MODELS HOT PRODUCTS
6-7
9000/1100 MODELS HOT PRODUCTS
8-9
2-STROKE EXHAUST: SINGLE PIPES / Y-PIPES
10
2-STROKE EXHAUST: LIGHTWEIGHT MUFFLERS 11
SEASON HIGHLIGHTS
4-STROKE EXHAUST
12
FUEL CONTROL
14
ECU RE-MAPPING / TIMING KEYS
15
HYPERSHIFT™ CLUTCH KITS
16-17
CLUTCHING COMPONENTS
18-19
X-GAMES SNO-X TUCKER HIBBERT
HYPERSHIFT™ HELIXES
20
X - G A M E S H I L L - X R YA N S I M O N S
SPEEDWERX H5™ CLUTCH SPRINGS
21
DRIVE BELTS
22
STEALTH HEAD MOD KIT
22
BIG BORE KITS
23
X-GAMES 2016 QUALIFIER WES SELBY
I S O C P R O O P E N N AT I O N A L S N O - X P O I N T S T U C K E R H I B B E R T
I S O C P R O O P E N S N O - X N AT I O N A L W I N S 13 T U C K E R H I B B E R T
INTAKE PERFORMANCE
24-25
I S O C P R O L I T E S N O - X N AT I O N A L W I N S 2 C O R E Y WAT K I N S O N , T Y L E R A D A M S
MACHINE SERVICES
26-27
C S R A P R O O P E N N AT I O N A L S N O - X P O I N T S L E E B U T L E R
SPROCKETS & CHAIN
28-29
C S R A P R O O P E N N AT I O N A L S N O - X W I N S 5 L E E B U T L E R , D AV E J O N A S
SPECIALTY TOOLS
30-31
R M S H A H I L L C L I M B N AT I O N A L W I N S 8 D AV I D M C C LU R E , K Y L E TA P I O, J E R E M Y A R C H I B A L D
ATV/UTV PERFORMANCE
R M S H A H I L L C L I M B 6 0 0 I M P. N AT I O N A L P O I N T S D AV I D M C C LU R E
SUPER CHARGERS KITS
32
MIRA ENDURO TRIPLE CROWN CADERETTE RACING
CLUTCH HOUSING BLOWER KIT
33
M I R A S O O I - 5 0 0 B R I A N D I C K & W E S S E L B Y A R C T I C C AT / C H R I S T I A N B R O T H E R S R A C I N G
WET CLUTCH DELETE KIT
33
ATV & UTV EXHAUST
34
HYPERSHIFT™ CLUTCH KITS
35
U S X C P R O S TO C K N AT I O N A L W I N S 7 W E S S E L B Y, Z A C H H E R F I N D A H L
U S X C P R O O P E N N AT I O N A L W I N S 7 W E S S E L B Y, Z A C H H E R F I N D A H L
HYPERSHIFT™ CLUTCHING COMPONENTS
36-38
U S X C P R O S TO C K N AT I O N A L P O I N T S Z A C H H E R F I N D A H L
ECU RE-PROGRAMMING
38
U S X C P R O O P E N N AT I O N A L P O I N T S Z A C H H E R F I N D A H L
FUEL CONTROL
39
O L D F O R G E S H O O T O U T 80 0 T R A I L M O D TO P S P E E D R O N G I L L A N D
K&N AIR AND OIL FILTERS
40
S TO C K 80 0 G R A S S D R A G S U N D E F E AT E D S E A S O N R O N G I L L A N D
SPECIALTY TOOLS
41
S TO C K 80 0 G R A S S D R A G S W O R L D C H A M P I O N R O N G I L L A N D
AUTOMOTIVE PERFORMANCE
W O R L D R E C O R D E T 8 0 0 S TO C K 5.11 R O N G I L L A N D
PERFORMANCE HEADERS
42
N S R A P O I N T S S TO C K 8 0 0 R O N G I L L A N D
HEADER PARTS
43
N S R A P O I N T S S TO C K 1 0 0 0 R O N G I L L A N D
MERGE CONTROLLERS / MANDREL BENDS
N S R A S TO C K D R I V E R O F T H E Y E A R R O N G I L L A N D
NECESSITIES
N S R A P O I N T S S TO C K 7 0 0 J A D E G I L L A N D
APPAREL & GEAR
46
N S R A P O I N T S H E AV Y M O D 6 00 J A D E G I L L A N D
COMPANY POLICY
48
N S R A M U LT I P L E W I N S R O N G I L L A N D, J A D E G I L L A N D
FAX-IN ORDER FORM
49
44-45
SN OWMOBILE
ZR 4000 // hot products
ZR 4000
KIT - STAGE I
ATV / UTV
KIT CONSISTS OF THESE COMPONENTS
2015 ZR 4000 Clutch Kit
2016 ZR 4000 Clutch Kit
3.5˚ Flywheel/Timing Key
Standard Lightweight Muffler (Painted Black)
L2 Series Lightweight Muffler (Ceramic Coated)
ZR 4000
STAGE 1 KIT
PART #
CKA4000
CKA4000-3
ACFKL3.5
AC4000M
AC4000M-2
PURCHASED AS EXTERMINATOR KIT - PRICING STARTS AT
PRICE
$189.95
$399.95
$21.00
$319.95
$379.95
$504.95
KIT - STAGE II
LIGHTWEIGHT MUFFLERS
Weight is horsepower! This newly designed lightweight muffler sheds weight without sacrificing reliability or
performance. Our muffler also offers a deeper / throatier sound than stock while using stock mounting location
and hardware. No EFI changes required.
AUTOMOTIVE
ZR 4000
PART #
AC4000M
AC4000M-CC
AC4000M-2
AC4000M
DESCRIPTION
Standard Style (Stock Like Sound Levels) Black Painted
Standard Style (Stock Like Sound Levels) Ceramic Coated
L2 Series (Light & Loud) Ceramic Coated
KIT - STAGE III
WEIGHT SAVINGS
6 lbs.
6 lbs.
8 lbs.
PRICE
$319.95
$379.95
$379.95
HYPERSHIFT CLUTCH KITS
You can expect to see improved acceleration and response with our kits. Most kits come with our H5 alloy
clutch springs, machined adjustable weights and a compound or progressive radius helix. Kit components
depend on application.
PART #
CKA4000
CKA4000-2
CKA4000-3
CKA4000-4
CKA4000-5
CKA4000-6
CKA4000
DESCRIPTION
2015 ZR 4000 (Trail/Cross Country)
2015 ZR 4000 (Sno-X)
2016 ZR 4000 (Trail/Cross Country)
2016 ZR 4000 (Sno-X)
2016 ZR 4000 (Sno-X Limited/Novice 50% Throttle)
2016 ZR 4000 (Sno-X Transition 50% Throttle & ECU)
PRICE
$189.95
$189.95
$399.95
$399.95
$399.95
$399.95
TIMING KEY
Increase acceleration and throttle response and gain 3-4 hp. Requires 91+ octane premium pump fuel.
PART #
ACFKL3.5
DESCRIPTION
PRICE
$21.00
PANEL VENT KIT
Cooler under the hood temperatures = more hp and longer belt life.
PART #
SW-901
DESCRIPTION
Side Panel Vent Kit
PRICE
$209.95
4TH WHEEL KITS
These kits are suggested for studded and racing applications. Kit improves rigidity and stability with studs.
PART #
SPX4WK
SPX4WK-4
DESCRIPTION
2015-2016 RR Models (New & Improved)
2015-2016 LXR Models
SPX4WK
2
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
PRICE
$299.95
$185.00
ZR/XF/M 6000 // hot products
AC6000M-2
Weight is horsepower! This lightweight muffler sheds weight without sacrificing reliability or performance. Our
muffler also offers a deeper / throatier sound than stock while using stock mounting location and hardware.
No EFI changes required. If you are looking for the lightest and loudest muffler for your sled, than our L2 series
muffler is for you!
PART #
AC6000M
AC6000M-CC
AC6000M-2
AC6000M
DESCRIPTION
WEIGHT SAVINGS
10 lbs.
10 lbs.
15 lbs.
PRICE
$319.95
$379.95
$379.95
CKA6000
PART #
CKA6000
CKA6000-2
CKA6000-3
CKA6000-4
DESCRIPTION
2014-2015 ZR/XF 6000
2014-2015 XF High Country/M 6000
2016 ZR/XF 6000
2016 XF High Country/M 6000
PRICE
$299.95
$299.95
$399.95
$399.95
PANEL VENT KIT
PART #
SW-901
DESCRIPTION
Side Panel Vent Kit
PRICE
$209.95
MANUAL CHAIN TENSIONER KIT
Designed for the most extreme and hard/aggressive riding conditions.
PART #
ACMCT
DESCRIPTION
Manual Chain Tensioner Kit
PRICE
$129.95
HIGH FLOW INTAKE
More air and cooler air gives you more power and performance. No EFI changes needed.
AC800HFI
PART #
AC800HFI
DESCRIPTION
High Flow Air Intake Vents
PRICE
$25.99
4TH WHEEL KITS
SPX4WK
PART #
SPX4WK
SPX4WK-4
SPX4WK-5
DESCRIPTION
ZR 129” Models
ZR 137”/XF Models
Shop online 24/7
|
PRICE
$299.95
$185.00
$TBD
Join our e-mail list online to receive our newsletter!
3
SN OWMOBILE
ZR 6000 R SX (SNO-X RACE SLED) // hot products
SNO-X MOD KIT
This is the exact same kit and technology that was used to dominate the ISOC pro-open class, the winter
x-games and multiple drag races around the mid-west since 2012. This same race winning reliability and performance is available to you over the counter. This kit is based off of the 2009-2016 stock Arctic Cat 600 Sno Pro
engine. Kit includes: Our custom race twin pipe kit, billet head inserts, complete Hypershift™ clutch kit with our
H5 alloy clutch springs, carb boring, crank case stuffing, crankshaft true and weld, cdi remapping and cylinder
porting. We also provide you with baseline jetting specs. 2013+ models do not come with all of the parts listed
due to rule changes.
2011-2012 MODELS: 160+ HP @ 8700-9000 RPM WITH A VERY STRONG OVERALL POWERBAND.
2013+ MODELS: Call for more information due to rule changes.
ATV / UTV
PART #
DESCRIPTION
AC612SX
2012 Speedwerx 600 SNO-X Mod Kit
AC613SX
2013-2015 Speedwerx 600 SNO-X Mod Kit
AC616SX
2016 Speedwerx 600 SNO-X Mod Kit
NOTE: Labor for tear down and clean up is extra.
PRICE
$3292.00
$2175.00
$2175.00
AC611SX
WORLD DOMINATION KIT
AUTOMOTIVE
This is the same kit used by the “T-Train“ Tucker Hibbert #68 to win the 2010 & 2012 FIM World SNO-X Championship. This same world championship winning performance is available to you exclusively from Speedwerx.
This kit works on 2009-2016 Arctic Cat 600 Sno Pro models. Kit includes cylinder porting, crank case stuffing,
carb boring, and Hypershift™ clutch kit. This kit it is designed to run on 91+ octane premium pump fuel for trail
use or a 110 / 92 octane mix for racing. You can use the Speedwerx World Domination Kit for trail riding, cross
country or sno-x applications. Please specify your type of use on this kit so we can match you up with the best
clutching set-up for your application.
PART#
AC600WDK
DESCRIPTION
Speedwerx 600 Sno Pro World Domination Kit
PRICE
See Breakdown Below
KIT BREAKDOWN:
SPD-PORT-R
SPXCCS
HSP-CARB2
Hypershift™ Clutch Kit
Speedwerx Porting - Best in the industry. Period.
Speedwerx Complete Crank Case Stuffing To Proper Specifications
Speedwerx Boring Of Your Rack-Style Carburetors
Depends on application - SNO-X / Cross-Country / Trail
$500.00 (Per Cylinder)
$950.00
$250.00 (Plus Labor)
$179.95 - $399.95
AC600WDK
WHEEL KITS
SPX4WK
4TH WHEEL KIT
These kits are suggested for cross-country racing and/or trail conversion applications. Kit comes complete with
lightweight aluminum axle, lightweight aluminum spacers, idler wheels, all necessary mounting hardware and
full installation instructions.
PART #
SPX4WK
DESCRIPTION
2008-2016 600 Sno Pro 4th Wheel Kit (New & Improved)
PRICE
$299.95
BILLET IDLER WHEELS
These wheels were designed and intended for the hardest and toughest riders. The stock wheels can break
and fail during races. These billet aluminum wheels are much stronger than stock and will not fail. We have ran
them for several sno-x seasons without replacing them. Plus they look trick.
PART #
ACBW
ACBW-2
DESCRIPTION
2006-2014 500 & 2006-2011 600 Sno Pro Models - Billet Idler Wheels
2012-2016 600 Sno Pro Models - Billet Idler Wheels
PRICE
$89.00ea.
$89.00ea.
ACBW
LIGHTWEIGHT MUFFLER
muffler also offers a deeper / throatier sound than stock while using stock mounting location and hardware. If
you are looking for the lightest and loudest muffler for your sled, than our L2 series muffler is for you!
PART #
AC600M-4
AC600M-4-CC
AC600M-5
DESCRIPTION
2012-2016 600 Sno-Pro Standard Style (Black Painted)
2012-2016 600 Sno Pro Standard Style (Ceramic Coated)
2012-2016 600 Sno Pro L2 Series (Light & Loud) Ceramic Coated
PRICE
$319.95
$379.95
$379.95
AC600M-3
87 OCTANE HEAD KIT
Tested and designed for the extreme conditions of the Iron dog cross-country race, these heads will also work
for trail applications. For riders who want to trail ride their 600 Sno Pros and not have to worry about getting
premium fuel -- these heads are for you. Speedwerx will provide jetting and clutching specs to complete this
set-up. There is a small power loss due to the lower compression but it is not noticeable. NOTE: Works on 20092016 carbureted models only.
PART #
AC609BH-87D
4
DESCRIPTION
2009-2016 600 Sno Pro 87 Octane Domes
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
PRICE
$129.95ea
|
www.speedwerx.com
AC609BH-87D
ZR/XF 7000 // hot products
muffler is for you!
PART #
AC7000M
AC7000M-2
DESCRIPTION
Standard Style (Stock Like Sound Levels) Stainless Steel
HP GAIN
+8 HP
+8 HP
WEIGHT SAVINGS
3 lbs.
8 lbs.
PRICE
$499.95
$379.95
PART #
CKA7000
CKA7000-2
DESCRIPTION
2014-2015 ZR/XF 7000
2016 ZR/XF 7000
PRICE
$299.95
$399.95
CKA7000
PANEL VENT KIT
PART #
SW-901
DESCRIPTION
Side Panel Vent Kit
PRICE
$209.95
PART #
ACMCT
DESCRIPTION
PRICE
$129.95
4TH WHEEL KITS
PART #
SPX4WK
SPX4WK-4
SPX4WK-5
DESCRIPTION
ZR 129” Models
ZR 137”/XF Models
PRICE
$299.95
$185.00
$TBD
SPX4WK
Shop online 24/7
|
5
SN OWMOBILE
ZR/XF/M 800/8000 // hot products
SPEEDWERX PROCHARGER SUPERCHARGER KIT
For years Speedwerx has been leading the industry in snowmobile performance and this kit takes it to a
completely new level. We have developed a complete supercharger kit for the Arctic Cat 800cc sleds using
a top of the line supercharger from ProCharger, one of the industry leaders in superchargers. Our kit comes
complete with everything needed for a complete install with a few options to choose from. This kit makes
225 hp on premium pump gas from sea level to 13,000 ft. Please call for race gas applications. No chassis
modifications are needed to install the kit. New for 2016 our kits will include a water to air intercooler set-up
and cogged pulleys and belt. With our new water to air intercooler set-up you can expect to see 80° F charge
temps on average during a typical mountain riding day.
ATV / UTV
PART #
ACSC-800-12-WAC
ACSC-800-16-WAC
APPLICATION
2012-2015 XF/M 800/8000 Models
2016 XF/M 8000 Models
PRICE
$7500.00
$7500.00
AUTOMOTIVE
ADVANTAGES OF THE SPEEDWERX PROCHARGER SUPERCHARGER KIT:
- No lag (Best throttle response you’ve ever seen in the mountains)
- Stock-like sound levels with our standard muffler
- Self contained oiling system (No tanks or pumps to worry about)
- Lower under-hood temps compared to a turbo set-up
- Low charge temps (80° F on average in mountain riding conditions)
- Instant throttle response
- Best fuel controller on the market with 4D mapping
- No chassis mods required
- Only 5-10 lbs. heavier than stock after install (Depends on muffler option)
- Made in the USA
KIT INCLUDES:
- Speedwerx Full Supercharger Exhaust System
- Speedwerx Clutch Kit With Machined Adjustable Weights & H5 Alloy Springs
- Larger Injectors (Plug & Play)
- Cold Air Intake
- Power Commander PCV Fuel Controller With 4D Mapping
- ProCharger Supercharger
- Complete Mounting Brackets & Hardware
- Pulleys & Drive Belt
- High Flow Aluminum Charge Box & Charge Tubes
- Water To Air Heat Exchanger, Pump & Wiring Harness
- Water To Air Intercooler
ACSC-800-012-IC
THIS SPEEDWERX PROCHARGER SUPERCHARGER KIT COMES AS A COMPLETE BOLT-ON KIT.
(APPROXIMATE INSTALL TIME IS 8 HOURS!)
SUGGESTED UPGRADES:
PART #
AT-200
POD-300
AC800M-8-SC
PRO-INSTALL
3007-873-C
ACFHM-800-12:1
66
DESCRIPTION
Dynojet AFR Meter
Dynojet Display, Data Logger & Adjuster
L2 Series (Light & Loud) Muffler
Speedwerx Professional Installation and Tune
Stock Head Core
Stock Head Mod To 12:1
Speedwerx,Inc.
Inc. | | 651.982.6020
651.982.6020 or
or 651.982.0600
651.982.0600 | | www.speedwerx.com
www.speedwerx.com
Speedwerx,
PRICE
$279.99
$249.99
$379.95
$1000.00
$378.49
$99.95
ZR/XF/M 800/8000 // hot products
EXTERMINATOR KITS
Our Exterminator kits are designed to ensure our customers are running the correct combination of parts for their particular model. Not only will our kit’s put you ahead of your competition,
they also offer better pricing in kit form. These set-ups are designed for everyday type riding and
in most applications run on premium pump gas. We have grouped different options of performance upgrades together to ensure our customers are looking at the correct combination of
parts for their machine, giving you the confidence that you are getting the best bang for your
buck.
800/8000 MODELS
KITS
STAGE 1
Hypershift Clutch Kit
High Flow Y-Pipe
Power Commander PCV Fuel Controller
PART #
CKA800-XX
AC800Y-4
11-004
STAGE 2
Single Pipe Kit (Includes Y-Pipe)
Power Commander PCV Fuel Controller
Boyesen RAD Valves
High Flow Intake Kit
PART #
CKA800-XX
AC800S-XX
11-004
ACFKL1.5
RAD53-2
AC800HFI
PRICE
$185.95-$399.95
$209.95
$379.95
800/8000 MODELS
$739.95
PRICE
$185.95-$399.95
$719.95
$379.95
$21.00
$329.95
$25.99
KIT - STAGE II
800/8000 MODELS
STAGE 2 KIT
$1569.95
muffler is for you!
PART #
AC800M-7
AC800M-7-CC
AC800M-8
DESCRIPTION
WEIGHT SAVINGS
10-11 lbs.
10-11 lbs.
15-16 lbs.
KIT - STAGE III
PRICE
$319.95
$379.95
$379.95
AC800M-8
AC800M-7
PART #
CKA800-6
CKA800-7
CKA800-8
CKA800-9
DESCRIPTION
2012-2015 ZR/XF 800/8000
2012-2015 XF High Country/M 800/8000
2016 ZR/XF 8000
PRICE
$299.95
$185.95
$399.95
$399.95
CKA800-6
PART #
ACMCT
DESCRIPTION
PRICE
$129.95
4TH WHEEL KITS
PART #
SPX4WK
SPX4WK-4
SPX4WK-5
DESCRIPTION
ZR 129” Models
ZR 137”/XF Models
PRICE
$299.95
$185.00
$TBD
SPX4WK
Shop online 24/7
|
7
SN OWMOBILE
ZR/XF/M 9000 (1100 TURBO) // hot products
Our Exterminator kits are designed to ensure our customers are running the correct combination of parts for their particular model. Not only will our kit’s put you ahead of your competition, they also offer better pricing in kit form. These
set-ups are designed for everyday type riding and in most applications run on premium pump gas. We have grouped
different options of performance upgrades together to ensure our customers are looking at the correct combination of
parts for their machine, giving you the confidence that you are getting the best bang for your buck.
9000 & 1100 TURBO
ATV / UTV
KIT - STAGE I
Single Stage ECU Re-Mapping
L2 Series Lightweight Muffler
Insulated Heat Tape / Panel Insulation
Side Panel Vent Kit
9000 & 1100 TURBO
PART #
RPI-1100T
CKA1100T-XX
AC1100TM-2
HT1X3
SW-901
AUTOMOTIVE
9000
& 1100
TURBO KIT - PRICING STARTS AT
PURCHASED
AS EXTERMINATOR
PRICE
$400.00
$269.95-$399.95
$379.95
$150.00
$209.95
$1339.95
KIT - STAGE II
STAGE 1 KIT
KIT - STAGE I
9000 & 1100 TURBO
STAGE 2 KIT
9000 & 1100 TURBO
9000 & 1100 TURBO
KIT - STAGE III - RACE GAS
KIT - STAGE II
4 Stage Multi-Map ECU Re-Mapping
Insulated Heat Tape / Panel Insulation
Side Panel Vent Kit
Aluminum Charge Tubes
KIT - STAGE I
9000 & 1100 TURBO
9000 & 1100 TURBO
PART #
RPI-1100T-M
CKA1100T-XX
AC1100TM-2
HT1X3
SW-901
AC1100TCTK
PRICE
$600.00
$269.95-$399.95
$379.95
$150.00
$209.95
$269.95
$1779.95
KIT - STAGE II
9000 & 1100 TURBO
4 Stage Multi-Map ECU Re-Mapping
Header Down Pipe - Stainless Steel
Insulated Heat Tape / Panel Insualtion
Side Panel Vent Kit
Aluminum Charge Tubes
Head Stud Kit
PART #
RPI-1100T-M
CKA1100T-XX
AC1100TM-2
AC1100TDP
HT1X3
SW-901
AC1100TCTK
Z1THSK
STAGE 3 KIT
8
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
PRICE
$600.00
$269.95-$399.95
$379.95
$439.95
$150.00
$209.95
$269.95
$183.75
$2369.95
ZR/XF/M 9000 (1100 TURBO) // hot products
ECU MAPPING
This is as simple as it gets for adding serious HP to your 9000/1100 Turbo. We have developed our own software
that allows us to reprogram the stock ECU and adjust fuel, boost limits, timing, rev limiter and waste gate activation/deactivation RPM. With this software there are no limits to what we can do to unleash the most power from
your 1100 Turbo. All of these great features allow us to produce up to 290+ HP with the stock turbo. It also allows
us to make up to 240 HP on premium pump gas all while improving the fuel mileage by up to 2 gallons per tank
compared to stock. So over time the mapping will pay for itself! ECU boxes that are sent in will be remapped
within 1 business day for a fast and speedy turn around. For those that cannot wait, we have core boxes on hand
ready to be sent out.
ECU mapping is available in 2 different forms. Our single map version where we can put any single map in your
box, or our multi map function that allows us to run up to 4 different maps at one time and you can select on
the go (real-time) which map you would prefer to run. Both set-ups look stock and can easily be hidden from
your competition.
MAPS AVAILABLE: (NOTE: ALL HP CLAIMS ARE WITH AN INTAKE TEMPERATURE OF 100° F AND HIGHER! NORMAL OPERATION IS 60° F!)
• 87 OCTANE SAFE TRAIL MAP 177 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER
• 91 OCTANE SAFE TRAIL MAP 210 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER (IMPROVES FUEL MILEAGE OVER STOCK)
• 110+ OCTANE LAKE RACE MAP 260 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER (REQUIRES HEAD STUD KIT!)
• 114+ OCTANE DRAG RACE MAP 290+ HP W/ SPEEDWERX WASTE GATE MOD (REQUIRES HEAD STUD KIT!)
PART #
DESCRIPTION
RPI-1100T
2012-2016 Single Map ECU Re-Program
RPI-1100T-M
2012-2016 4 Stage Mulit-Map (Includes mapping and map selector switch assembly)
Z1WGM
2009-2016 Models - Waste Gate Modification For 290 HP Level
NOTE: You must send your ECU box to us for remapping or call and arrange for an exchange!
PRICE
$400.00
$600.00
$34.95
Our lightweight mufflers are designed to improve performance and overall power all while reducing weight.
These systems offer a different sound with stock-like runability without any EFI changes. For the 1100 Turbo/9000 models we are only offering our L2 series muffler because it has the same sound as our older standard
version muffler due to the turbo reducing most of the exhaust noise. The L2 series is also lighter and runs cooler
since the exhaust doesn’t have to stay in the muffler as long before it exits the machine.
PART #
AC1100TM-2
AC1100TSP
DESCRIPTION
Straight Pipe (Stainless Steel)
HP GAIN
+10 HP
+10 HP
WEIGHT SAVINGS
10 lbs.
20 lbs.
AC1100TSP
AC1100TM-2
PRICE
$379.95
$259.95
PART #
CKA1100T
CKA1100T-2
CKA1100T-3
CKA1100T-4
DESCRIPTION
2012-2015 F/ZR/XF 1100 Turbo/9000
2012-2015 XF High Country/M 1100 Turbo/9000
2016 ZR/XF 9000
PRICE
$269.95
$299.95
$399.95
$399.95
CKA1100T-2
PANEL VENT KIT
PART #
SW-901
DESCRIPTION
Side Panel Vent Kit
PRICE
$209.95
CHARGE TUBE KIT
Our charge tube kit is made from thin wall 18-gauge .049” aluminum. It is designed to help dissipate heat
quicker than the stock tubes and other thicker walled aluminum tubes on the market. It is also more durable
under higher boost pressures than the stock rubber hoses. Tubes come polished for a great look.
PART #
AC1100TCTK
DESCRIPTION
2012-2016 1100 Turbo/9000 Models
PRICE
$269.95
Shop online 24/7
|
9
SN OWMOBILE
2-STROKE EXHAUST //single pipes & y-pipes
ARCTIC CAT MODEL
FAT DADDY SINGLE PIPES
ATV / UTV
AUTOMOTIVE
ABOUT OUR EXHAUSTS:
All of our Fat Daddy single pipes undergo countless hours of testing and
development combined with hours of design and fitting. We have taken
the time necessary to produce the best single pipes for your machines.
Here are some of the key benefits to using our single pipes:
STRAIGHT-UP USA HORSEPOWER
Every pipe is designed, DYNO tested and then field tested to produce
real, accurate and reliable horsepower gains. Our pipes are not built for
one run across the lake or on the trail. Our pipes are built to last and our
pipes work!
CERAMIC COATING
All of our single pipes come with a long lasting finish that offers a great
look while also acting as a thermal barrier to keep heat inside the pipe
for optimum performance.
LIGHTWEIGHT
All of our single pipes are lighter than the stock system. You can expect
an average weight savings of 5 lbs.
GREAT FIT
All single pipes are designed to run into the stock muffler for simple
installation.
QUIET
You can expect stock sound levels while using the stock muffler.
DETAILED INSTRUCTIONS
Each single pipe comes complete with a full instruction/set-up sheet
which includes jetting specifications if needed, clutch set-up suggestions, as well as full installation instructions.
YEAR
HP GAIN
800 F / M / XF Procross/Proclimb (0-5,000 Ft.)
12-16
9-10
800 F / M / XF Procross/Proclimb (5,000 Ft.+)
12-16
9-10
*800 F / M / XF Procross/Proclimb Models
12-16
9-10
800 Crossfire / Crossfire R 8 (0-5,000 Ft.)
10-11
9
800 Crossfire / Crossfire R 8 (5,000 Ft.+)
10-11
9
*800 Crossfire / Crossfire R 8
10-11
9
800 M-Series M8 / HCR (0-5,000 Ft.)
10-11
9
800 M-Series M8 / HCR (5,000 Ft.+)
10-11
9
*800 M-Series M8 / HCR
10-11
9
800 Speedwerx Sno Pro Big Bore (0-5,000 Ft.)
08-11
N/A
800 Speedwerx Sno Pro Big Bore (5,000 Ft. +)
08-11
N/A
*925 Speedwerx Big Bore 800 F/M/XF
12-16
N/A
1000 Crossfire / Crossfire R 1000
07-11
16-17
1000 M-Series M1000
07-11
16-17
* Adjustable pipe kit features 2 stinger options for different elevations.
WEIGHT SAVINGS
PART #
PRICE
5 lbs.
5 lbs.
5 Lbs.
5 lbs.
5 lbs.
5 lbs.
5 lbs.
5 lbs.
5 lbs.
N/A
N/A
5 Lbs.
5 lbs.
5 lbs.
AC800S-9
AC800S-10
AC800S-ADJ-2
AC800S-5
AC800S-8
AC800S-ADJ
AC800S-5
AC800S-8
AC800S-ADJ
AC6/800S
AC6/800S-2
AC925S-ADJ-2
AC1000S-4
AC1000S-4
$719.95
$719.95
$885.95
$719.95
$719.95
$885.95
$719.95
$719.95
$885.95
$719.95
$719.95
$885.95
$719.95
$719.95
AC800S-5
GET THE POWER TO THE GROUND:
When adding horsepower to your machine it is very important to
be running at the proper RPM! For best results we highly suggest
the use of one of our Hypershift™ clutch kits.
SEE PAGES 16-17 FOR MORE DETAILS.
AC800S-ADJ
ONE STINGER INSTALLED & ONE STINGER LOOSE
ARCTIC CAT MODEL
600 Crossfire / F-Series / M-Series
800 Crossfire / Crossfire R / F-Series / M-Series
1000 Crossfire / F-Series / M-Series
YEAR
07-11
07-16
07-11
HP GAIN
WEIGHT SAVINGS
N/A
4
7-8
AC800Y-4
10
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
PART #
AC600Y
AC800Y-4
AC1000Y
PRICE
$209.95
$209.95
$209.95
2-STROKE EXHAUST // mufflers
SPEEDWERX L2 COMPETITION SERIES MUFFLERS (LIGHT & LOUD)
The new L2 Series muffler is designed to be lighter and louder than our original lightweight muffler. You will
see up to a 15 pound weight savings! These are made from mild steel and they are ceramic coated.
Disclaimer: Designed for competition use only! Speedwerx, Inc. is not responsible for the performance or noise of these exhaust
systems. These exhaust systems are designed to be lighter and louder than our original lightweight muffler systems. The mufflers are suggested to be used for closed course racing only.
ARCTIC CAT MODEL
YEAR
WEIGHT SAVINGS
PART #
PRICE
800 F / M / XF Models
800 M / XF Models
6000 Models
2012-16
2010-2011
2014-16
15 lbs.
15 lbs.
15 lbs.
AC800M-8
AC800M-10
AC6000M-2
$379.95
$379.95
$379.95
4000 Models
600 SP Models
2015-16
2012-16
8 lbs.
9 lbs.
AC4000M-2
AC600M-5
$379.95
$379.95
AC800M-8
Please Note: 800 models only; + 200 RPM above 5000’ elevation.
STANDARD LIGHTWEIGHT MUFFLERS
Our lightweight mufflers cut anywhere from 3 to 12 pounds depending on model! All of our mufflers are
designed to reduce weight while keeping sound levels as low as possible. Our mufflers have more bark than
stock units but we try not to make them too obnoxious. In other words, they won’t blow you off of your seat!
Some of our mufflers are even quieter than stock. Our 2010-2016 800 mufflers are 4-6 decibels quieter
than OEM @ 4000 RPM! We always have performance on our minds and our mufflers will either perform
the same or better than the stock system. Our mufflers utilize the stock outlet location and require no major
chassis modifications for installation. All mufflers come standard painted with a hi-temp black paint and most
mufflers come with installation instructions if needed.
ARCTIC CAT MODEL
YEAR
WEIGHT SAVINGS
PART #
PRICE
CERAMIC PART #
PRICE
500 Sno Pro
600 F-Series 6
600 M-Series M6
600 Sno Pro
600 Sno Pro
800 F / M / XF Procross / Proclimb
800 F-Series 8
800 M-Series M8 / HCR
1000 M-Series M1000
4000 Models
6000 Models
10-14
07-11
05-11
08-11
12-16
12-16
10-11
10-11
10-11
07-11
07-11
15-16
14-16
3 lbs.
4 lbs.
4 lbs.
3 lbs.
3 lbs.
11 Lbs.
10-11 lbs.
4 lbs.
10-11 lbs.
11 lbs.
11 lbs.
6 lbs.
10 lbs.
AC600M-3
AC600M
AC600M-2
AC600M-3
AC600M-4
AC800M-7
AC800M-5
AC800M-4
AC800M-5
AC1000M-2
AC1000M-2
AC4000M
AC6000M
$319.95
$319.95
$319.95
$319.95
$319.95
$319.95
$319.95
$319.95
$319.95
$319.95
$319.95
$319.95
$319.95
AC600M-3-CC
AC600M-CC
AC600M-2-CC
AC600M-3-CC
AC600M-4-CC
AC800M-7-CC
AC800M-5-CC
AC800M-4-CC
AC800M-5-CC
AC1000M-2-CC
AC1000M-2-CC
AC4000M-CC
AC6000M-CC
$379.95
$379.95
$379.95
$379.95
$379.95
$379.95
$379.95
$379.95
$379.95
$379.95
$379.95
$379.95
$379.95
AC800M-5
AC800M-7
Shop online
online 24/7
24/7 || Join
Join our
our e-mail
e-mail list
list online
online to
to receive
receive our
our newsletter!
newsletter!
Shop
11
11
SN OWMOBILE
4-STROKE EXHAUST COMPONENTS //
9000 / 1100 TURBO STAINLESS STEEL DOWN PIPE
Our new down pipe design has a better merge and blends better from the waste gate to the exhaust. This
allows for more overall performance and horsepower. The Speedwerx 1100 turbo down pipe is intended for 240+ HP
set-ups only! This down pipe will not work properly on models running less then 240 HP.
AC1100TDP
ARCTIC CAT MODEL
YEAR
HP GAIN
WEIGHT SAVINGS
PART#
PRICE
9000 / 1100 Turbo F / M / XF
2012-2016
+5 HP
-2 Lbs.
AC1100TDP
$439.95
ATV / UTV
9000 / 1100 TURBO FULL EXHAUST SYSTEM
The merged waste gate exhaust system for the 2012 1100 turbo models is a complete system from the turbo
and back. You will see unmatched power and weight savings with both of these Speedwerx full exhaust kits.
As always, our full exhaust kits are made right here in Minnesota, USA!
AC1100TEX
AUTOMOTIVE
ARCTIC CAT MODEL
YEAR
HP GAIN
WEIGHT SAVINGS
PART#
PRICE
9000 / 1100 Turbo F / M / XF
2012-2016
+15 HP
-10 Lbs.
AC1100TEX
$799.95
SPEEDWERX L2 COMPETITION SERIES MUFFLERS (LIGHT & LOUD)
The new L2 Series muffler is designed to be lighter and louder than our original lightweight muffler. You will
see up to a 15 pound weight savings! These are made from mild steel and they are ceramic coated.
ARCTIC CAT MODEL
YEAR
HP GAIN
WEIGHT SAVINGS
Part #
Price
9000 / 1100 TURBO
ZR 7000
2012-2016
2016
+10 HP
+8
-10 lbs.
-8 lbs.
AC1100TM-2
AC7000M-2
$379.95
$379.95
AC1100TM-2
9000 / 1100 TURBO L2 COMPETITION SERIES STAINLESS STEEL STRAIGHT PIPE
Lightest & Loudest! Our new stainless steel straight pipe is designed to be as light as possible. This system is
loud and is typically used for race applications.
AC1100TSP
ARCTIC CAT MODEL
YEAR
HP GAIN
WEIGHT SAVINGS
PART#
PRICE
9000 / 1100 Turbo F / M / XF
2012-2016
+10 HP
-20 Lbs.
AC1100TSP
$259.95
SPEEDWERX LIGHTWEIGHT MUFFLERS
Our light weight mufflers for the 4 stroke machines drop up to 8-10 lbs. depending on the model. All of 4 stroke
muffler systems are designed to improve power, reduce weight and keep noise levels at a minimum. In most
cases our 4 stroke mufflers will add 10 hp to your machine without any fuel / efi changes required. Mufflers come
standard with our high temp black finish, or you can upgrade to a ceramic coated finish. Some systems available
in stainless steel as well.
12
ARCTIC CAT MODEL
YEAR
HP GAIN
WEIGHT SAVINGS
PART#
PRICE
CERAMIC PART #
PRICE
Z1 Turbo Models
7000 Models
2009-11
2014-16
+ 10 HP
+ 8 HP
-10 lbs.
-3lbs.
ACZ1TM
AC7000M
$319.95
$499.95
ACZ1TM-CC
S/S
$379.95
N/A
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
ACZ1TM
Shop online
online 24/7
24/7 || Join
Join our
our e-mail
e-mail list
list online
online to
to receive
receive our
our newsletter!
newsletter!
Shop
13
13
SN OWMOBILE
FUEL CONTROL // power commander pcv
ARCTIC CAT
YEAR
PCV
PRICE
PCV PTI
PRICE
ZR 6000 El Tigre
2015
11-021
$379.95
TBD
TBD
400/500 SP / 600/700 F / M / XF
2005-2016
11-007
$379.95
11-007PTI
$449.95
ZR / XF 7000
2014-2016
11-015
$379.95
11-015PTI
$449.95
800cc/1000cc Models
2009-2016
11-013
$449.95
11-013PTI
$549.95
800cc/1000cc Models
2009-2016
11-004
$379.95
11-004PTI
$449.95
Z1 Models (Non-Turbo)
2009-2011
11-003
$379.95
N/A
N/A
9000 / 1100 Turbo
2012-2016
11-009
$379.95
11-009PTI
$449.95
ATV / UTV
PCV
POWER COMMANDER FUEL CONTROLLERS
POWER COMMANDER V (PCV):
• Reduced Size (Less than half the size of PCIII)
• USB Powered From Computer (9 Volt Adaptor is no longer needed for programming)
• 2 Position Map Switching Function Built In (Map switch not included)
• Gear / Speed Input (Allows for map adjustment based on gear and speed)
• 10 Throttle Position Columns (Up from 9 on the PCIII)
• Enhanced “Accel Pump” Utility (Increased adjustment and sensitivity ranges)
• -100% / +250% Fuel Change Rate (Allows more adjustment range)
• Analog Input
(Allows user to use any 0-5 volt sensor and built an adjustment table based on its input such as boost
or temp.)
The Power Commander is a fuel injection adjustment unit that plugs “inline” with
the bike’s stock ECU (electronic control unit). The PC uses original equipment style
connectors, so no splicing or cutting of the harness is required. Most installations
take less than 15 minutes, some as little as 5 minutes.
AUTOMOTIVE
Changes are made to the bikes fuel and, in some cases, ignition curves via the PC’s
onboard microprocessor. Using this technology we are able to offer a large area of
adjustment without making any permanent changes to the bike’s ECU. Removing
the PC returns the bike to its previous stock condition. Each unit comes complete
with software and cable link that allows you to change between different maps or
make adjustments to a map file.
AUTO TUNE MODULE
DYNOJET IS PLEASED TO BE ABLE TO BRING YOU THE LATEST IN TUNING ACCESSORIES. WE NOW OFFER
A WIDE BAND AUTO TUNE KIT THAT CAN BE USED WITH ANY POWER COMMANDER V.
The Dynojet Auto Tune Kit plugs into the PCV with a single cable. The only other connections needed are a +12 volt and a ground. With the Auto Tune Kit connected the
user can specify what air/fuel ratio (how rich or lean) to make each specific RPM and
throttle position % combination. This makes it possible to adjust cruise for best fuel
economy as well as larger throttle openings for peak power. Dynojet includes base
settings for the air/fuel ratios, but they are fully adjustable if need be.
AT-200
PART #
AT-200
AT-300
48292001
DESCRIPTION
Single Channel Single Cylinder - PCV Models Only! (Acts as an O2 Gauge!)
Dual Channel Twin Cylinder - PCV Models Only! (Acts as a dual O2 Gauge!)
Replacement O2 Sensor for All AutoTune Kits
PRICE
$279.99
$399.99
$99.85ea
POD-300 DATA VIEWER & LOGGER
THE POD-300 IS AN ACCESSORY DISPLAY FOR DYNOJET DEVICES THAT SUPPORT DJ-CAN; INCLUDING
THE POPULAR POWER COMMANDER V, AUTOTUNE, WIDEBAND 2, AND CMD.
Simply connect the included CAN cable and you’re ready to go; there’s no need to
tap power or deal with other messy connections.
Need to adjust your tune in the field, or datalog the supported channels to further
refine your tune? No problem, with the POD-300 you’re just a few clicks away from
taking advantage of the many features with it’s easy to use menu system.
POD-300
Handle Bar Mount
• Display channels real-time: RPM, TP, map position (when using map switch), duty cycle, fuel change, speed,
pressure, ignition change & wideband air/fuel ratio- (w/WB2 or AutoTune connected)
• Real time fuel adjustments
• Weather resistant for use in all conditions
• Log channels saved to internal memory and can be viewed / analyzed with Dynojet’s PowerCore Software
• High contrast display, viewable in direct sunlight
• 3 Programmable light alarms
Can Cable
14
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
PART #
26300062
DESCRIPTION
POD Commander - 300 Data Viewer & Logger
PRICE
$249.99
61300062
76950145
76950143
76950117
76950690
76950680
76950530
Handle Bar mount for POD Commander - 300 Display
6” Can Cable
18” Can Cable
36” Can Cable
6’ Can Cable
10’ Can Cable
20’ Can Cable
$59.95
$14.00
$14.00
$15.00
$16.00
$ CALL
$ CALL
ECU RE-MAPPING //
ECU BOX RE-MAPPING
This is as simple as it gets for adding serious HP to your 9000/1100 Turbo. We have developed our own software
that allows us to reprogram the stock ECU and adjust fuel, boost limits, timing, rev limiter and waste gate activation/deactivation RPM. With this software there are no limits to what we can do to unleash the most power from
your 1100 Turbo. All of these great features allow us to produce up to 290+ HP with the stock turbo. It also allows
us to make up to 240 HP on premium pump gas all while improving the fuel mileage by up to 2 gallons per tank
compared to stock. So over time the mapping will pay for itself! ECU boxes that are sent in will be remapped
within 1 business day for a fast and speedy turn around. For those that cannot wait, we have core boxes on hand
ready to be sent out.
ECU mapping is available in 2 different forms. Our single map version where we can put any single map in your
box, or our multi map function that allows us to run up to 4 different maps at one time and you can select on
the go (real-time) which map you would prefer to run. Both set-ups look stock and can easily be hidden from
your competition.
MAPS AVAILABLE: (NOTE: ALL HP CLAIMS ARE WITH AN INTAKE TEMPERATURE OF 100° F AND HIGHER! NORMAL OPERATION IS 60° F!)
• 87 OCTANE SAFE TRAIL MAP 177 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER
• 110+ OCTANE LAKE RACE MAP 260 HP W/ SPEEDWERX LIGHTWEIGHT MUFFLER (REQUIRES HEAD STUD KIT!)
• 114+ OCTANE DRAG RACE MAP 290+ HP W/ SPEEDWERX WASTE GATE MOD (REQUIRES HEAD STUD KIT!)
PART #
DESCRIPTION
RPI-1100T
2012-2016 Single Map ECU Re-Program
RPI-1100T-M
2012-2016 4 Stage Mulit-Map (Includes mapping and map selector switch assembly)
Z1WGM
2009-2016 Models - Waste Gate Modification For 290 HP Level
NOTE: You must send your ECU box to us for remapping or call and arrange for an exchange!
PRICE
$400.00
$600.00
$34.95
TIMING KEYS // advance or retard timing
TIMING KEYS
EFI APPLICATIONS:
Add more power to your machine with the use of these new keys. They work great to add acceleration and
throttle response in many applications. Available in three different degrees.
NOTE: Keys fit on all new stock Crossfire/F-Series/M-Series EFI ZR / MC / KC & 800 Procross/Proclimb models!
PART #
ACFKL1.5
ACFKL2.5
ACFKL3.5
DESCRIPTION
Advances 1.5˚
Advances 2.5˚
Advances 3.5˚
PRICE
$21.00
$21.00
$21.00
CARB APPLICATIONS:
Add even more power with the use of 1, 2, or 3 degree advanced flywheel keys. Especially if you have a ZR and
want to have the extra power like the Mountain Cat CDI boxes have.
PART #
ACFK1
ACFK2
ACFK3
DESCRIPTION
Advances 1˚
Advances 2˚
Advances 3˚
PRICE
$21.00
$21.00
$21.00
ACFKL STYLE
ACFK STYLE
IMPORTANT:
AN ENGINE’S TIMING CURVE IS A VERY IMPORTANT INGREDIENT
WHEN IT COMES TO PERFORMANCE. WE OFFER TIMING KEYS FOR
MOST ARCTIC CAT MODELS. IF YOU ARE NOT SURE WHICH TIMING
KEY YOU NEED, PLEASE CONTACT OUR TECH LINE @ 651.982.6020!
Shop online
online 24/7
24/7 || Join
Join our
our e-mail
e-mail list
list online
online to
to receive
receive our
our newsletter!
newsletter!
Shop
15
15
SN OWMOBILE
HYPERSHIFT™ CLUTCH KITS //
SPEEDWERX HYPERSHIFT™ CLUTCH KITS
For years Speedwerx has worked very hard to set the standard in performance clutch kits utilizing titanium springs. The springs and complete clutch kits worked perfectly but the
price was hard to swallow due to the steep cost of titanium. To address the cost issue we have come up with a new spring material that we call H5 Alloy. The new H5 Alloy has a lot
of the same characteristics as a titanium spring (with the exception of the weight loss) but at a fraction of the cost. We thought that would make it a little easier on our customers.
These springs may be new to the consumer market, but we have been running these parts for over 9 years now! Not all kits come with the new H5 Alloy material at this time, but
if you want to make sure your kit includes a spring made of the new H5 Alloy all you have to do is request it!
Most of our performance clutch kits come with a new H5 Alloy drive spring, a set of our machined weights that feature a black oxide coating to prevent corrosion, one of our
compound radius secondary helixes and a new H5 Alloy secondary spring. If you want a smooth yet aggressive holeshot, excellent back shifting and great throttle response, ask
for the best. Ask for Speedwerx.
ATV / UTV
PLEASE NOTE:
Not all kits are listed! If your machine or certain application is not listed, don’t worry. Our staff has years of experience and tuning knowledge to make a special kit that is perfect
for you!
AUTOMOTIVE
DIAMOND DRIVE ARCTIC CAT
CLUTCH KIT
STANDARD ARCTIC CAT CLUTCH KIT
CKAF8-6-2 - STAGE 2 KIT
2012-2015 ARCTIC DRIVE
CLUTCH KIT
CKA800-6
HYPERSHIFT™ CLUTCH KIT APPLICATION CHART
ARCTIC CAT MODEL
440 Sno-Pro
16
YEAR
2004-2007
ZR 4000
2015
ZR 4000
2015
ZR 4000
2016
ZR 4000
2016
MODIFIER
Pump Gas Conversion Kit
0-5,000 ft.
CKA440PG
PRICE
$280.00
5,000-9,999 ft.
CALL
PRICE
$CALL
10,000 ft. +
CALL
CKA4000
$189.95
N/A
N/A
SX
CKA4000-2
$189.95
N/A
N/A
CKA4000-3
$399.95
N/A
N/A
SX
CKA4000-4
$399.95
N/A
N/A
ZR 4000
2016
SX LTD / NOVICE 50% THROTTLE
CKA4000-5
$399.95
N/A
N/A
ZR 4000
2016
SX TRANSITION 50% AND ECU
CKA4000-6
$399.95
N/A
N/A
5000 ZR LXR
500 Sno Pro
500 Sno Pro
500 Sno Pro
500 Sno Pro
570 F-Series
600 F-Series/Crossfire
600 M-Series
600 Sno Pro Stock
600 Sno Pro Mod
600 Sno Pro Stock
600 Sno Pro Stock
600 Sno Pro Mod
600 Sno Pro Stock
2014
2010-2014
2010-2014
2010-2014
2010-2014
2009-2014
2011
2011
2013
2013
2013
2014
2014
2014
CKA5000
CKA500-4
CKA500-4-S
CKA500-5
CKA500-5-LIMITED
CKA570
CKAF6-5
CKAM6-3
CKA613
CKA613-2
CKA613-3
CKA614
CKA614-2
CKA614-3
$299.00
$379.95
$379.95
$379.95
$379.95
$265.00
$CALL
$130.00
$235.00
$130.00
$235.00
$329.95
$229.95
$329.95
CKA5000-HA
CKA500-4-HA
CKA500-4-S-HA
CKA500-5-HA
CKA500-5-LIMITED-HA
CKA570-HA
CKAF6-5-HA
CKAM6-3-HA
CKA613-HA
CKA613-2-HA
CKA613-3-HA
CKA614-HA
CKA614-2-HA
CKA614-3-HA
With Speedwerx Single Pipe
SNO-X Race Kit
SNO-X Limited (ECU & Throttle)
Sno-X
Sno-X
Cross-Country / Trail
Sno-X
Sno-X
Cross-Country / Trail
$299.00
$379.95
$379.95
$379.95
$379.95
$CALL
$CALL
$CALL
$CALL
$CALL
$CALL
$CALL
$CALL
$CALL
CKA5000-HA-1
CKA500-4-HA-1
CKA500-4-S-HA-1
CKA500-5-HA-1
CKA500-5-LIMITED-HA-1
CKA570-HA-1
CKAF6-5-HA-1
CKAM6-3-HA-1
CKA613-HA
CKA613-2-HA
CKA613-3-HA
CKA614-HA
CKA614-2-HA
CKA614-3-HA
600 SP/SX
2015
CKA615
$285.00
N/A
N/A
600 SP/XC
2015
CKA615-3
$185.00
N/A
N/A
600 SP/SX
2016
CKA616
$399.95
N/A
N/A
600 SP/XC
2016
CKA616-3
$399.95
N/A
N/A
PRICE
$CALL
$299.00
$379.95
$379.95
$379.95
$379.95
$CALL
$CALL
$CALL
$CALL
$CALL
$CALL
$CALL
$CALL
$CALL
6000 El Tigre
2015
CKA6000
$299.95
CKA6000-HA
$299.00
CKA6000-HA-1
$299.00
ZR/XF 6000
2014-2015
CKA6000
$299.95
CKA6000-HA
$299.95
CKA6000-HA-1
$299.95
$299.95
M / XFHC 6000
2014-2015
CKA6000-2
$299.95
CKA6000-2-HA
$299.95
CKA6000-2-HA-1
ZR/XF 6000
2016
CKA6000-3
$399.95
CKA6000-3-HA
$399.95
CKA6000-3-HA-1
$399.95
M / XFHC 6000
2016
CKA6000-4
$399.95
CKA6000-4-HA
$399.95
CKA6000-4-HA-1
$399.95
7000 XF / ZR
2014-2015
CKA7000
$299.95
CKA7000-HA
$299.00
CKA7000-HA-1
$299.00
ZR / XF 7000
2016
CKA7000-2
$399.95
CKA7000-2-HA
$399.95
CKA7000-2-HA-1
$399.95
730 Speedwerx 500 to 730 Sno Pro
2010-2014
CKA730
$359.95
CKA730-HA
$CALL
CKA730-HA-1
$CALL
Speedwerx, Inc.
|
Speedwerx 500 to 730cc Big Bore
651.982.6020 or 651.982.0600
|
www.speedwerx.com
HYPERSHIFT™ CLUTCH KIT APPLICATION CHART
ARCTIC CAT MODEL (CONT’D)
YEAR
MODIFIER
0-5,000 ft.
PRICE
5,000-9,999 ft.
PRICE
10,000 ft. +
800 Crossfire / Crossfire R
2010-2011
Stage 1 - Stock Pipe
CKAF8-6
$139.00
CKAF8-6-HA
$210.00
CKAF8-6-HA-1
PRICE
$255.00
2010-2011
Stage 2 - Speedwerx Pipe
CKAF8-6-2
$225.00
N/A
N/A
N/A
N/A
800 F-Series
2010-2011
Stage 1
CKAF8-7
$370.00
CKAF8-7-HA
$CALL
CKAF8-7-HA-1
$CALL
800 F-Series
2010-2011
Stage 2
CKAF8-7-2
$370.00
CKAF8-7-2-HA
$CALL
CKAF8-7-2-HA-1
$CALL
$299.95
800 F / XF Procross
2012-2015
CKA800-6
$299.95
CKA800-6-HA
$299.95
CKA800-6-HA-1
800 M-Series
2007
CKAM8
$130.00
CKAM8-4-HA
$130.00
CKAM8-4-HA-1
$130.00
800 M-Series
2010-2011
CKAM8-6
$130.00
CKAM8-6-HA
$130.00
CKAM8-6-HA-1
$130.00
$130.00
800 M-Series
2010-2011
CKAM8-7
$130.00
CKAM8-7-HA
$130.00
CKAM8-7-HA-1
800 M Procross
2012-2015
With Speedwerx Single Pipe
CKA800-7
$185.95
CKA800-7-HA
$185.95
CKA800-7-HA-1
$185.95
ZR /XF 8000
2016
CKA800-8
$399.95
CKA800-8-HA
$399.95
CKA800-8-HA-1
$399.95
M / XFHC 8000
2016
CKA800-9
$399.95
CKA800-9-HA
$399.95
CKA800-9-HA-1
$399.95
1000 M-Series
2008-2011
CKAM1-2
$130.00
CKAM1-HA-2
$130.00
CKAM1-HA-1-2
$130.00
$275.00
Z1 Turbo / EXT
2009-2011
CKAZ1T-2
$275.00
CKAZ1T-2-HA
$275.00
CKAZ1T-2-HA-1
1100/9000 Turbo F / XF Procross
2012-2015
With 0627-073 Belt
CKA1100T
$269.95
CKA1100T-HA
$269.95
CKA1100T-HA-1
$269.95
1100/9000 Turbo M Proclimb
2012-2015
CKA1100T-2
$299.95
CKA1100T-2-HA
$299.95
CKA1100T-2-HA-1
$299.95
ZR / XF 1100T
2016
CKA1100T-3
$399.95
CKA1100T-3-HA
$399.95
CKA1100T-3-HA-1
$399.95
M / XFHC 1100T
2016
CKA1100T-4
$399.95
CKA1100T-4-HA
$399.95
CKA1100T-4-HA-1
$399.95
SPEEDWERX KITS ARE DESIGNED AND TESTED WITH WOODY’S TRACTION PRODUCTS!
WE SUGGEST WOODY’S TRACTION PRODUCTS FOR ALL APPLICATIONS.
BE SURE TO GET THE TRACTION YOU NEED, CALL US TO GET A WOODY’S
GRIP KIT.
WE WILL CUSTOM TAILOR A KIT FOR YOUR MACHINE AND THE TYPE
OF RIDING THAT YOU DO.
CALL AND SPEAK TO ONE OF OUR TECHNICIANS - (651) 982-6020
OR EMAIL OUR TECH TEAM - TECH@SPEEDWERX.COM
Shop online 24/7
|
17
SN OWMOBILE
HYPERSHIFT™ CLUTCH WEIGHTS //
WEIGHT BUSHINGS / SET SCREWS
HYPERSHIFT MACHINED ADJUSTABLE CLUTCH WEIGHTS - MADE IN THE USA!
ORIGINAL HYPERSHIFT MACHINED WEIGHTS
All of our machined adjustable weights come heat treated and black oxide coated to prevent wear and corrosion. We
offer 3 different profiles of weights. The first being our Hammerhead (heavy tip) weights which provide you with the most
aggressive shift. They work great on big torque twin cylinder engines. Then we have our Tapered Tip weights, which are the
same profile as the Hammerhead weights but they feature a medium tip for a slightly less aggressive upshift and better
backshift. Last but not least we have our Taper Tip 2 weights, which have a similar profile as the Tapered Tip weights but
they feature the lightest tip available for the least aggressive upshift and the best backshift. The tip of the weight is adjustable so you can add 2.5 grams for fine tuning.
Weight bushings and set screws are
sold separately. Be sure to order as
many as you need for your model as
well as the correct part. Set screws
should be replaced every time you
change weights! Bushing should be
replaced when worn or when they are
loose.
RWB
ATV / UTV
AUTOMOTIVE
HAMMERHEAD WEIGHTS
I-60
(44.5gr)
I-45
(47.5gr)
I-30
(50.5gr)
J-30
(52.5gr.)
I-15
(53.3gr)
I-56
(56.0gr)
J-58
(58.0gr)
K-60
(60.5gr)
L-62
(62.4gr)
M-64
(64.3gr)
N-66
(66.5gr)
O-68
(68.3gr)
P-70
(70.3gr)
Q-72
(72.5gr)
R-74
(74.5gr)
S-76
(76.5gr)
T-78
(78.5gr)
TT-80
(80.0gr)
U-82
(82.5gr)
V-85
(85.0gr)
W-87
(87.0gr)
X-89
(89.0gr)
Y-91
(91.0gr)
Z-93
(93.0gr)
ZZ-95
(95.0gr)
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
TAPERED TIP WEIGHTS
I1-B
(52.0gr)
I-1
(53.2gr)
J-1
(55.2gr)
K-1
(57.0gr)
L-1
(59.0gr)
M-1
(60.5gr)
M-1N
(60.5gr/notch)
N-1
(62.5gr)
N1-N
(62.5gr/notch)
O-1
(64.5gr)
P-1
(66.5gr)
Q-1
(68.5gr)
R-1
(70.0gr)
S-1
(72.0gr)
T-1
(74.0gr)
TT-1
(76.0gr)
U-1
(78.0gr)
V-1
(80.5gr)
W-1
(82.5gr)
X-1
(84.5gr)
Y-1
(86.5gr)
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
FITS POLARIS P-85 AND P-90 CLUTCHES
AND UP TO 2015 CAT MODELS
TAPERED TIP 2 WEIGHTS
I-2
(50.5gr)
*I-2A
(50.5gr)
J-2
(52gr)
K-2
(54gr)
L-2
(56.0gr)
M-2
(58.0gr)
N-2
(60.0gr)
N-2N
(60.0gr/notch)
P-2
(63.5gr)
Q-2
(65.5gr)
R-2
(67.5gr)
S-2
(69.5gr)
T-2
(71.5gr)
TT-2
(73.5gr)
U-2
(75.5gr)
V-2
(77.5gr)
W-2
(79.5gr)
X-2
(81.5gr)
Y-2
(83.5gr)
25165
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
NOTE: ALL WEIGHTS ARE SOLD WITHOUT
BUSHINGS OR SET-SCREWS! IF YOUR
MACHINE REQUIRES BUSHINGS, YOU MUST
ORDER THEM SEPARATELY!
PART #
RWB-kit
25165
RWB2-kit
DESCRIPTION
Weight Bushings
Set Screw
Bushings for Team
Primary
PRICE
$26.95set
$0.66ea
$44.95set
CAM ARM REPAIR KITS
Replace your worn or damaged clutch
weight pins. Make sure your clutch is
operating properly. Each kit will repair
one primary clutch.
4639-674
PART #
4639-674
1639-030
DESCRIPTION
FIXED PIN STYLE
BUSHING STYLE
PRICE
$33.95
$47.49
ADJUSTABLE WEIGHT COMPONENTS
ADJUSTABLE AGGRESSIVE PROFILE MACHINED WEIGHTS
This new aggressive profile weight revs quicker at engagement while shifting
harder through the mid-range and top end. These weights will act 4 to 6
grams heavier than a standard profile weight. (If you are replacing a 65
gram standard weight, you should order a 60-61 gram aggressive profile weight.) The tip is also adjustable so you can add up to 2.5 grams for fine
tuning. The engagement RPM will increase about 200 RPM over the standard
profile.
5-SERIES ADJUSTABLE MACHINED WEIGHTS
These weights are designed to match
the power curve and shift characteristics of some of the new 4-stroke
engines on the market. These weights
all act 4-6 grams heavier in the clutch
than they weigh on the scale.
ADJUSTMENT KIT/INDIVIDUAL COMPONENTS
This kit comes with a base of set screws,
button head screws, washers and
loc-tite for fine tuning and adjusting
your new speedwerx weights. With
this kit you can add from 0.5g - 2.4g
per weight. Individual parts are also
available.
SPXAWK
ADJUSTABLE AGGRESSIVE PROFILE
MEDIUM TIP WEIGHTS
I3-1
(54.0gr)
$35.95ea
J3-1
(56.0gr)
$35.95ea
J3-1N
(55.1gr)
$35.95ea
K3-1
(58.2gr)
$35.95ea
K3-1N
(57.0gr)
$35.95ea
O3-1
(65.0gr)
$35.95ea
Q3-1N
(70.8gr)
$35.95ea
S3-1
(74.3gr)
$35.95ea
T3-1
(76.1gr)
$35.95ea
U3-1
(80.1gr)
$35.95ea
V3-1
(82.7gr)
$35.95ea
W3-1
(84.8gr)
$35.95ea
ZZ3-1
(95.0gr)
$35.95ea
These weights act 4-6 grams heavier!
18
Speedwerx, Inc.
|
ADJUSTABLE AGGRESSIVE PROFILE
LIGHT TIP WEIGHTS
J3-2
(54.5gr)
$35.95ea
K3-2
(56.5gr)
$35.95ea
L3-2
(58.5gr)
$35.95ea
M3-2
(60.3gr)
$35.95ea
N3-2
(62.5gr)
$35.95ea
O3-2
(64.3gr)
$35.95ea
P3-2
(66.2gr)
$35.95ea
Q3-2
(68.3gr)
$35.95ea
R3-2
(70.2gr)
$35.95ea
S3-2
(72.3gr)
$35.95ea
ADJUSTABLE 5-SERIES WEIGHTS
M-5
N-5
O-5
P-5
Q-5
R-5
S-5
T-5
|
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
$35.95ea
FITS POLARIS P-85 AND P-90 CLUTCHES
AND UP TO 2015 CAT MODELS
651.982.6020 or 651.982.0600
(62.6gr)
(64.4gr)
(66.5gr)
(68.4gr)
(70.4gr)
(72.6gr)
(74.3gr)
(76.4gr)
www.speedwerx.com
ADJUSTMENT KIT
SPXAWK Adjustment Kit
$15.95
THREADLOCK TUBE
0150425 BLUE - MEDIUM
$2.50
WASHERS
1175203 0.4g
$0.30ea
SET SCREWS
25165
(8-32 x 3/16” ) - 0.3gr
25167
(8-32 x 5/16” ) - 0.5gr
25168
(8-32 x 3/8” ) - 0.6gr
25169
(8-32 x 1/2” ) - 0.9gr
$0.66ea
$0.66ea
$0.66ea
$0.66ea
BUTTON-HEAD SCREWS
24021
(8-32 x 3/16”) - 0.9g
24022
(8-32 x 1/4”) - 1.0g
24691
(8-32 x 5/16”) - 1.1g
24023
(8-32 x 3/8”) - 1.2g
24024
(8-32 x 1/2”) - 1.5g
$0.99ea
$0.99ea
$0.99ea
$0.99ea
$0.99ea
HYPERSHIFT™ CLUTCH WEIGHTS //
HYPERSHIFT MACHINED CLUTCH WEIGHTS - MADE IN THE USA!
NEW TEAM BOSS PRIMARY CLUTCH WEIGHTS BUSHINGS SOLD SEPARATELY
These new T series weights are built specifically for the new Arctic Cat Team primary clutches they are built to with stand all requirements that come with these
new clutches. All of our machined weights come heat treated and black oxide coated to prevent wear and corrosion. We offer 4 different profiles of weights all of
them are adjustable by about 2.5 grams heavier on the tip with the use of our adjustable weight kit. Bushings sold separately.
• Hammerhead (heavy tip) weights which provide you with the most aggressive shift.
• Tapered Tip weights feature a medium tip for a slightly less aggressive up-shift and better back-shift.
• Taper Tip 2 weights feature the lightest tip available for the least aggressive up-shift and the best back-shift.
• 4 Series Aggressive profile weights feature an aggressive ramps for a very aggressive up shift and a light tip to maintain good back-shift.
FULL TIP HAMMER HEAD STYLE
ADJUSTABLE MACHINED WEIGTHS
I-T
(60.3gr)
$49.95ea
J-T
(62.5gr)
$49.95ea
K-T
(64.3gr)
$49.95ea
L-T
(66.5gr.)
$49.95ea
M-T
(68.3gr)
$49.95ea
N-T
(70.5gr)
$49.95ea
O-T
(72.3gr)
$49.95ea
P-T
(75.5gr)
$49.95ea
Q-T
(77.3gr)
$49.95ea
R-T
(79.5gr)
$49.95ea
S-T
(81.5gr)
$49.95ea
T-T
(83.5gr)
$49.95ea
TT-T
(85.5gr)
$49.95ea
U-T
(87.3gr)
$49.95ea
V-T
(89.5gr)
$49.95ea
W-T
(91.3gr)
$49.95ea
X-T
(93.5gr)
$49.95ea
Y-T
(95.3gr)
$49.95ea
Z-T
(97.5gr)
$49.95ea
MEDIUM TIP / SAME AS POLARIS 10 SERIES
ADJUSTABLE MACHINED WEIGHTS
I-1T
(58.5gr)
$49.95ea
J-1T
(60.3gr)
$49.95ea
K-1T
(62.5gr)
$49.95ea
L-1T
(64.3gr)
$49.95ea
M-1T
(66gr)
$49.95ea
N-1T
(67.7gr)
$49.95ea
O-1T
(69.8)
$49.95ea
P-1T
(72.0gr)
$49.95ea
Q-1T
(73.5)
$49.95ea
R-1T
(75.5gr)
$49.95ea
S-1T
(77.4gr)
$49.95ea
T-1T
(79.1gr)
$49.95ea
TT-1T
(80.6gr)
$49.95ea
U-1T
(82.5gr)
$49.95ea
V-1T
(85.3gr)
$49.95ea
W-1T
(87.5gr)
$49.95ea
X-1T
(89.3gr)
$49.95ea
Y-1T
(91.5gr)
$49.95ea
ACTUAL WEIGHT MAY VERY AS PRODUCTION PARTS
WERE NOT COMPLETE AT TIME OF THIS SHEET
/
LIGHT TIP / TAPERED TIP SERIES
ADJUSTABLE MACHINED WEIGHTS
I-2T
(57.3gr)
$49.95ea
J-2T
(59gr)
$49.95ea
K-2T
(60.8gr)
$49.95ea
L-2T
(62.5gr)
$49.95ea
M-2T
(64.3gr)
$49.95ea
N-2T
(66gr)
$49.95ea
O-2T
(67.8gr)
$49.95ea
P-2T
(69.5gr)
$49.95ea
Q-2T
(71.3gr)
$49.95ea
R-2T
(73gr)
$49.95ea
S-2T
(74.8gr)
$49.95ea
T-2T
(76.6gr)
$49.95ea
TT-2T
(78.3gr)
$49.95ea
U-2T
(80.0gr)
$49.95ea
V-2T
(81.8gr)
$49.95ea
W-2T
(83.6gr)
$49.95ea
X-2T
(85.3gr)
$49.95ea
Y-2T
(87.0g)
$49.95ea
AGGRESSIVE PROFILE MACHINED WEIGHTS
J-4T
(54.0gr)
$49.95ea
K-4T
(55.7gr)
$49.95ea
L-4T
(57.5gr)
$49.95ea
M-4T
(59.3gr.)
$49.95ea
N-4T
(61.0gr)
$49.95ea
O-4T
(62.7gr)
$49.95ea
P-4T
(64.5gr)
$49.95ea
Q-4T
(66.3gr)
$49.95ea
R-4T
(68.0gr)
$49.95ea
S-4T
(69.7gr)
$49.95ea
T-4T
(71.5gr)
$49.95ea
TT-4T
(73.3gr)
$49.95ea
U-4T
(75.0gr)
$49.95ea
V-4T
(76.7gr)
$49.95ea
W-4T
(78.4gr)
$49.95ea
These will act 4-6 grams heavier than what they
weigh on the gram scale
NOTE: ALL WEIGHTS ARE SOLD WITHOUT BUSHINGS OR SET-SCREWS! IF YOUR
MACHINE REQUIRES BUSHINGS, YOU MUST ORDER THEM SEPARATELY!
Image by : John Hanson
s
r
a
e
y
en
e
t
f
fi
rx
r
e
e
w
v
d
o
e
“For en using Spgecomponents.
in
e
I’ve b clutching and tudnbuilding quality
s.”
mance
ing an
r
ucces
t
s
o
s
f
y
e
r
t
e
m
p
to
of
e part
cation
i
g
T
d
u
e
h
d
a
BBER
Their
ucts is
ER HI
d
ce pro
n
a
m
r
perfo
K
- TUC
The home of horsepower.
The home of horsepower.
Shop online 24/7
|
19
SN OWMOBILE
HYPERSHIFT™ HELIXES //
SPEEDWERX HYPERSHIFT™ HELIXES
We offer 3 types of cuts on our helixes, Progressive, Compound Radius and Straight. Progressive angle helixes progressively change from the starting angle to the ending angle
down the whole ramp. Compound radius cut helixes are progressive on the first section of the ramp and have a straight angle on the end of the ramp. Our straight helixes maintain the same angle through the entire ramp of the helix.
The advantage to the compound radius is that it will typically back shift quicker for snow cross or tight twisty trail riding. The starting angle is always steeper at first for quicker
acceleration, then progressively changes to the lesser angle so that the clutches don’t over shift and bog down the motor so you retain excellent top speed.
TEAM BOSS HELIX
ATV / UTV
TEAM BOSS HELIX
COMPOUND CUT
PART #
TBH-59-43.36
TBH-59-45.36
TBH-61-43.36
TBH-61-45.36
TBH-63-43.36
TBH-63-45.36
TBH-63-47.36
TBH-65-47.36
TBH-58-49.15
TBH-66-49.20
TBH-59-48.20
STRAIGHT CUT
++PART #
TBH-42
TBH-43
TBH-44
TBH-45
TBH-46
TBH-47
TBH-48
PRICE
$116.95
$116.95
$116.95
$116.95
$116.95
$116.95
$116.95
$116.95
$116.95
$116.95
$116.95
PRICE
$116.95
$116.95
$116.95
$116.95
$116.95
$116.95
$116.95
PROGRESSIVE CUT
PART #
PRICE
TBH-65-45.36R
$116.95
TBH-67-45.46R
$116.95
TBH-65-45.46R
$116.95
TBH-67-45.36R
$116.95
TBH-63-45.36R
$116.95
TBH-63-45.46R
$116.95
TBH-64-49.20R
$116.95
TBH-66-49.20R
$116.95
PROGRESSIVE CUT
PART #
PRICE
TBH-42R
$116.95
TBH-43R
$116.95
TBH-44R
$116.95
TBH-45R
$116.95
TBH-46R
$116.95
TBH-47R
$116.95
TBH-48R
$116.95
AUTOMOTIVE
2012-2015 MODELS FIXED SPRING RATE ADS HELIXES
STRAIGHT CUT
PART #
ADS36
ADS38
ADS40
PRICE
$120.00
$120.00
$120.00
SPEEDWERX 2012-2015 ARCTIC DRIVE HELIX
COMPOUND CUT
PART #
ADS54-40X
ADS54-38X
ADS54-36X
ADS52-40X
ADS52-38X
ADS52-36X
ADS50-40X
ADS50-38X
ADS50-36X
ADS48-40X
ADS48-38X
ADS48-36X
ADS46-40X
ADS46-38X
ADS46-36X
ADS44-40X
ADS44-38X
ADS44-36X
ADS42-40X
ADS42-38X
ADS42-36X
PROGRESSIVE CUT
PART #
ADS54P40
ADS54P38
ADS54P36
ADS52P40
ADS52P38
ADS52P36
ADS50P40
ADS50P38
ADS50P36
ADS48P40
ADS48P38
ADS48P36
ADS46P40
ADS46P38
ADS46P36
ADS44P40
ADS44P38
ADS44P36
ADS42P40
ADS42P38
ADS42P36
PRICE
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
TEAM PRIMARY CLUTCH SPRING CUP ADAPTOR
This spring cup adaptor is designed to allow you to run your older style primary springs
on the new Team clutches. It is necessary to keep proper spring alignment when using
the old style springs in the new Team clutch. These new clutches not only have a different load height compared to the old clutches, the spring cup diameter is different
as well. Using this adaptor with your old springs will change the rate of your spring
slightly. Here is a list of rate changes with our Speedwerx springs.
SPXTPSA
20
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
# SPXTPSA $ 19.95
ORIGINAL RATE AT 2.5” & 1.25”
CCH5-A-120-310
CCH5-A-125-340
CCH5-A-140-335
CCH5-A-170-260
CCH5-B-155-300
CCH5-B-165-310
CCH5-B-170-330
CCH5-B-175-305
CCH5-B-180-300
CCH5-B-190-330
CCH5-D-114-267
CCH5-D-122-285
CCH5-D-148-290
Team clutch heights with Spx
adaptor at 2.7” & 1.4”
115-305
120-335
130-325
160-255
150-305
155-315
165-310
170-300
175-295
180-320
110-265
115-275
143-285
PRICE
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
SPEEDWERX H5™ CLUTCH SPRINGS //
CLUTCH SPRINGS
Everyone wants to know why we offer the new H5 Alloy springs. The truth is there are several reasons why, but the main reason was to try and cut down on the price of
titanium that has sky-rocketed in the past few years. We want to provide our customers with a high performance part but we also want it to be priced reasonably low. These
new springs feature the following;
• SPEEDWERX H5 SPRINGS ARE AVAILABLE FOR CLUTCH, SUSPENSION,
AND VALVETRAIN APPLICATIONS.
• THIS NEW MATERIAL HAS A 30,000 TO 40,000 PSI HIGHER TENSILE
STRENGTH THAN STANDARD CHROME SILICON WIRE SPRINGS.
• WE HAVE BEEN TESTING AND RUNNING THESE SPRINGS FOR OVER
9 YEARS. (GRASS DRAGS / SNO-X / CROSS-COUNTRY & TRAIL APPLICATIONS!)
• NO RATE LOSS OVER TIME WHICH MAINTAINS EFFICIENT CLUTCHING
FOR A BETTER PERFORMING AND MORE CONSISTENT SPRING!
• UP TO A 35% WEIGHT SAVINGS OVER CHROME SILICON WIRE SUSPENSION SPRINGS!
• SAME PERFORMANCE AS TITANIUM AT A FRACTION OF THE COST!
• CUSTOM APPLICATIONS AVAILABLE UPON REQUEST!
ARCTIC CAT 6 & 9 POST, POLARIS P-85 & COMET PRIMARY CLUTCHES
| Rated @ 2.5” & 1.25”
PART #
COLOR
CCH5-A-120-310
Blue/White
CCH5-A-125-340
White
CCH5-A-140-335
Black
CCH5-A-170-260
Red/Green
CCH5-B-155-300
Red
CCH5-B-165-310
Blue
CCH5-B-170-330
Black/Yellow
CCH5-B-175-305
Black/Gold
CCH5-B-180-300*
Blue/Green/Green
CCH5-B-190-330*
Blue/Green
CCH5-D-122-285
Black/Green/Yellow
CCH5-D-114-267
Green
CCH5-D-148-290
Green/White
* Not covered under Speedwerx limited warranty.
PRICE
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
ARCTIC CAT TEAM PRIMARY CLUTCH 2016
PART #
CCH5-E-160-255
CCH5-E-155-315
CCH5-E-165-310
CCH5-E-180-320
| Rated @ 2.7” & 1.4” - more rates coming soon
DESCRIPTION
PRICE
ARCTIC CAT / TEAM PRIMARY CLUTCH SPRING
$49.95
$49.95
$49.95
$49.95
See Spring Cup Adaptor for more options.
2012-2015 ARCTIC CAT H5 STANDARD SECONDARY SPRINGS | Rated @ 2.6” & 1.4”
PART #
COLOR
CCH5-N-150-230
Black/Red
CCH5-N-150-250
Black
CCH5-N-150-270
Black/Gray
CCH5-N-155-220
Black/Orange
CCH5-N-170-250
Black/Purple
CCH5-N-170-270
Black/White
NOTE: Stock Black/Blue spring is 180-295.
PRICE
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
TEAM BOSS DRIVEN CLUTCH
PART #
CCH5-L-125-200
CCH5-L-140-200
CCH5-L-140-215
CCH5-L-140-330
CCH5-L-155-220
CCH5-L-155-240
CCH5-L-160-235
CCH5-L-160-250
CCH5-L-160-270
CCH5-L-180-270
CCH5-L-200-280
CCH5-L-180-240
| Rated @ 2.6” & 1.6”
ARCTIC CAT “ BOSS “ TEAM SECONDARY SPRING
ARCTIC CAT " BOSS " TEAM SECONDARY SPRING
PRICE
$49.95
$49.95
$49.95
$49.95
$49.95
$49.95
$49.95
$49.95
$49.95
$49.95
$49.95
$49.95
TEAM TSS-98 & TSS-004 CLUTCHES | Rated @ 2.875” & 1.625”
PART #
CCH5-J-140-240
CCH5-J-150-250
CCH5-J-155-222
CCH5-J-160-240
CCH5-J-160-260
CCH5-J-160-280
CCH5-J-160-300
CCH5-J-180-260
CCH5-J-180-280
CCH5-J-180-300
COLOR
Red
Green
Black/Red
Black/Purple
Black/White
Black/Silver
Black/Gold
Black/Blue
Black/Orange
Black/Lime Green
PRICE
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
$39.95
SKI-DOO TRA PRIMARY SPRINGS | Rated @ 2.9” & 1.6”
PART #
CCH5-C-160-320
CCH5-C-200-320
CCH5-C-200-380
CCH5-C-230-350
COLOR
Black/Blue
Black/Yellow
Black/Green
Black/Red
PRICE
$39.95
$39.95
$39.95
$39.95
ARCTIC CAT H5 STANDARD TORSIONAL SECONDARY SPRINGS | Rated @ 2.4” & 1.4”
PART #
CTH5-G-052-100
CTH5-G-080-115
CTH5-G-090-130
CTH5-G-115-239
COLOR
Black/Red
Black/Silver
Black/Blue
Black/Yellow
PRICE
$39.95
$39.95
$39.95
$39.95
ARCTIC CAT H5 ACT DRIVE SECONDARY SPRINGS | Rated @ 2.875” & 1.625”
PART #
CCH5-K-140-270
CCH5-K-140-290
CCH5-K-170-270
CCH5-K-170-290
CCH5-K-170-310
COLOR
Black/Orange
Black/Green
Black/Yellow
Black/Blue
Black/Red
PRICE
$39.95
$39.95
$39.95
$39.95
$39.95
Shop online 24/7
|
21
SN OWMOBILE
DRIVE BELTS // speedwerx and oem
SPEEDWERX DRIVE BELTS
SPX8989 & BLT2 Are designed to replace stock Arctic Cat 020 & 031 belts, this belt is wider and
longer. Belts work best for drag racing & Sno-X applications.
ATV / UTV
PART #
SPX8989
BLT2
BLT-5
44x4640
DESCRIPTION
Hard Compound
Soft Compound
2012-2016 800 Models Drag Race Belt - Longer / Wider / Softer Than Stock
2012-2016 9000 / 1100 Turbo Models Suggested for 400+ HP Applications
STOCK ARCTIC CAT DRIVE BELTS
We carry a full line of Arctic Cat stock drive belts. We have them on hand and
ready to ship to you!
PRICE
$91.50
$91.50
$99.00
$99.00
PART #
0627-070
0627-073
0627-075
0627-076
0627-081
0627-082
0627-083
0627-084
0627-085
0627-086
SPEEDWERX ACT DIAMOND DRIVE ARCTIC CAT BELT
This belt comes with our top secret compound. This belt is longer & wider than the OEM belt,
which offers a lower starting ratio for better acceleration. The compound length & width help
prevent or reduce the huge belt slippage problems most of the diamond drive units have! If
you have any questions, please contact our tech line.
AUTOMOTIVE
PART #
DESCRIPTION
*ACTBLT-1
2005-06 Firecat With 10.4” Secondary Clutch (Trail)
* Gains 1.5 MPH in 1000 Ft.
2012-2013
Bearcat 570/LTD
0627-067
Bearcat 570 XT
0627-046
Bearcat Z1 XT/LTD
0627-047
Crossfire 6
0627-046
Crossfire 8,CFR 8, CFR 1000
0627-060
F5 LXR/570
0627-067
F6 Sno Pro/8 EXT/LXR/
8 Sno Pro LTD
0627-046
M6/8/HCR0627-046
M1000 Sno Pro
0627-060
T5700627-067
TZ1/LXR LTD
0627-069
TZ1 Turbo LXR LTD
0627-073
Z1 LXR
0627-069
Z1 Turbo EXT/LXR/Sno Pro
0627-073
Sno Pro 500
0627-047
Sno Pro 600 (Sno Cross
0627-075
Sno Pro 600 (Cross Country
0627-076
PRICE
$179.95
$179.95
$179.95
$179.95
$98.95
$199.95
$98.95
$199.95
$199.95
$199.95
PRICE
$138.00
arctic cat oem drive belt fitment chart
2011
DESCRIPTION
2008-09 600R Sno Pro Race Sled
2009-2011 Z1 Turbo
2010-2011 600R Sno Pro Race Sled (SNO-X)
2010-2011 600R Sno Pro Race Sled (XC)
See Chart Below
See Chart Below
See Chart Below
See Chart Below
See Chart Below
See Chart Below
BC 570
0627-067
BC 570 XT
0627-046
BC Z1 XT
0627-047
F5 LXR, F570
0627-067
F 800 0627-084
F 1100
0627-081
F 1100 Turbo
0627-082
M 800
0627-084
M 1100
0627-081
M 1100 Turbo
0627-082
T5700627-067
TZ1 Touring
0627-069
TZ1 Turbo Touring
0627-082
XF 800
0627-084
XF 1100
0627-081
XF 1100 Turbo
0627-082
Sno Pro 500
0627-047
Sno Pro 600 Sno-X / XC
0627-085
2014
BEARCAT 570
0627-067
BEARCAT 570 XT
0627-046
BEARCAT Z1 XT
0627-047
BEARCAT Z1 XT GS
0627-073
F50627-067
F5700627-067
M 8000
0627-084
M 9000
0627-082
T5700627-067
TZ10627-069
TZ1 TURBO
0627-073
XF 7000
TBD
XF 8000
0627-083
XF 8000 High Country
0627-084
XF 9000
0627-082
ZR 5000
0627-081
ZR 6000
TBD
ZR 6000 SP
0627-086
2014 (CONT’D)
ZR 7000
ZR 8000
ZR 9000
SNO PRO 500
TBD
0627-083
0627-082
0627-047
STEALTH HEAD MOD KIT //
STOCK APPEARING ‘STEALTH’ HEAD MODS
Available for most Arctic Cat models. What we do is machine / gut your stock head
so that you can run our interchangeable domes. Our domes drop right into place
under your stock head cover without anyone even knowing it! Not only does this
add some serious power to your machine, but it is a cheaper alternative to the
complete billet head kit set-up.
How this works is you can either send us your stock head or order a new stock head
through us (we normally have them on-hand). We will machine it for our domes, and
then send it to you. If you would like to send in your stock (un-machined) head, we
will give you a credit when we receive it!
2007-2016 800
MODELS
STEALTH HEAD KIT
ACFHM-500
STOCK APPEARING ‘STEALTH’ HEAD MOD APPLICATIONS
ARCTIC CAT MODEL
500 Sno Pro/4000
22
YEAR
10-16
STOCK HEAD
MOD PART #
ACFHM-500
PRICE
$125.00
DOME PART #
(NEED 2)
ACF5BH-13
ACF5BH-14
ACF5BH-16
DESCRIPTION
Premium pump gas 0’-5000’
110 octane 0-5000’ or premium pump gas 5000’+
114 octane 0-5000’ or premium pump gas 10000’+
DOME
PRICE
$80.00
$80.00
$80.00
O-RING PART #
(NEED 2)
121-9746
PRICE
$2.00
800 / 8000 Crossfire / F-Series / M-Series
07-16
ACFHM-800
*NOTE: 2010-16 800 Models come stock with 13:1 compression ratio!
$177.00
ACFHM-800
ACFHM-800
ACF8BH13D-1
ACF8BH14D-1
ACF8BH15D-1
11:1 Compression For Boosted Applications
12:1 Compression For Boosted Applications
0-5,000 ft. Premium Fuel
5,000-9,999 ft. Premium Fuel
10,000 + ft. Premium Fuel
$99.95
$99.95
$180.00
$180.00
$180.00
1-232 9727
$3.95
925 Crossfire / F-Series / M-Series Big Bore
$177.00
ACF925BH13D
ACF925BH14D
ACF925BH15D
0-5,000 ft. Premium Fuel
5,000-9,999 ft. Premium Fuel
10,000 ft.+ Premium Fuel
$180.00
$180.00
$180.00
1-232 9727
$3.95
Speedwerx, Inc.
|
07-16
ACFHM-800
651.982.6020 or 651.982.0600
|
www.speedwerx.com
BIG BORE KITS //
925CC BIG BORE KIT - (WORKS GREAT FOR BOOSTED APPLICATIONS TOO!)
Kit comes complete with cylinder boring, porting and plating, custom pistons, base gaskets, our stealth
sleeper head mod kit with your choice of 13, 14 or 15:1 compression ratio inserts, and matching of your
stock exhaust valves (our light weight aluminum valves are also available). Kit requires premium 91+ octane
fuel. Your cylinders and head need to be sent in for exchange, outright cylinders and heads available upon
request at an additional cost. Kit also works great on turbo equipped machines.
2007-2009 MODEL CYLINDERS WILL SEE 170+ HP AND OVER 115 FT POUNDS OF TORQUE @ 7700-7900 RPM.
2010-2016 MODELS WILL SEE 188+ HP DUE TO THE BETTER PORT LAYOUT OF THE STOCK CYLINDERS.
APPLICATIONS: 2007-2016 800cc Crossfire, Crossfire R, F-Series and M-Series Models
PART#
ACF925BB-13
ACF925BB-14
ACF925BB-15
DESCRIPTION
0-4,999 ft.
5,000-9,999 ft.
10,000 ft. +
PRICE
$2100.00 (With Exchange)
REPLACEMENT PARTS (NOT ALL INCLUDED IN KIT!)
PART#
ACF925CYL
ACF925BH-13D
ACF925BH-14D
ACF925BH-15D
11319M09150
3604KD
3008-503
ACFHM-800
1-232 9727
3005-854
3004-081
3007-523
3007-536
3007-521
3007-522
3007-849
3007-873
3007-874
3007-889
DESCRIPTION
Modify Cylinder to Speedwerx Spec.
Dome, 13:1
Dome, 14:1
Dome, 15:1
Piston Kit
Replacement Ring Set
Needle Bearing, 22mm
Stock Head Cover Mod (For Speedwerx Inserts)
2007-2016 Dome O-Ring
2007-2016 Inner Head O-Ring
2007-2016 Outer Head O-Ring
2007-2009 Base Gasket
2007-2009 Exhaust Gasket
2007-2009 Cylinder Head, Stock
2007-2009 Cylinder, Stock
2010-2016 Cylinder, Stock
2010-2016 Cylinder Head, Stock
2010-2016 Base Gasket
2010-2016 Exhaust Gasket
PRICE
$720.00
$180.00
$180.00
$180.00
$269.00
$30.85
$27.95
$177.00
$3.95
$15.99
$12.49
$18.79
$4.99
$378.49
$844.99
$875.95
$378.49
$18.79
$9.49
925 BIG BORE KIT
ADDITIONAL OPTIONS:
PART#
ACF807EV
ACF810EV
Speedwerx Single Pipe Kit
Speedwerx Lightweight Muffler
Speedwerx High Flow Intake
Speedwerx Hypershift Clutch Kit
Speedwerx PCV Fuel Controller
Auto Tune Kit for PCV
V-Force Reeds
Dual EGT Gauge
Speedwerx Throttle Body Boring
DESCRIPTION
2007-2009 Billet Exhaust Valve
2010-2016 Billet Exhaust Valve
PRICE
$99.00ea.
$99.00ea.
$719.95
$319.95
$77.95 - $199.95
$130.00 - $399.95
$379.95
$279.99
$258.00
$359.95
$300.00
600 SNO PRO 800CC BIG BORE KIT
For those of you who want even more out of your 600 Sno Pro we have our 800cc big bore kit. The 800
kit requires stock 700 cylinder cores and a stock 2003-2011 600 or 700 head core to start. We have stock
cylinders and heads on hand ready to go if needed. We start by boring , porting and re-plateing your
cylinders to our 800 specs and then we re-machine a stock cylinder head to accept our domes. We then
send everything back with larger exhaust valves, pistons, wrist pin bearings and washers, our custom connecting rods, base gaskets and spark plug o-rings. Kit produces 160+ HP and tons of torque with our Fat
Daddy single pipe and bored carbs. Kit is designed and intended to run on premium pump gas
(91+ octane).
APPLICATIONS: 2008-2014 600 Sno Pro Models
PART#
AC6/800BB-13
AC6/800BB-14
AC6/800BB-15
13:1 - Premium Pump Gas 0’-5000’
14:1 - Premium Pump Gas 5000’ + or 110 Octane Below 5000’
15:1 - Premium Pump Gas 10,000’ + or 114 Octane Below 5000’
PRICE
$2715.00 (After Exchange)
NOTE: Speedwerx has cores on hand ready for exchange for both 700 and 800 kits. This means less down time and more ride time.
Speedwerx can also build your entire engine if needed. This includes tear down, new rod install and reassembly. Call our tech line for
800 BIG BORE KIT - 160+ HORSEPOWER
more details.
MORE BIG BORE / ENGINE KITS AVAILABLE
The big bore kits and engine kits listed below are also available. If you would like more information on these kits, please visit our website or call our tech line @ 651.982.6020!
ARCTIC CAT MODEL
SnoPro / Firecat
SnoPro / Firecat
Crossfire/M-Series/F-Series
ZR/ZL
M-Series
M-Series
M-Series
M-Series
STOCK SIZE
440/500cc
440/500cc
600/700cc
800/900cc
600cc
700cc
800cc
1000cc
MOD SIZE
730cc or 780cc
600cc
800cc
1000cc
600cc Improved
700cc Improved
800cc Improved
1000cc Improved
STARTING PRICE
$4500.00
$4500.00
$2100.00
$2015.00
$2950.00
$2950.00
$2950.00
$2950.00
Shop online 24/7
NOTED FOR
Multiple WSA National SNO-X Wins
2 x WPSA Pro National Points Titles | 2 x Winter X Games old Medals
Endless list of Hillclimb wins out west
Numerous pink slips won across North America
9 x Jackson Hole Hill Climb World Champion
3 x Jackson Hole Hill Climb World Champion | 1 x Undefeated Season
|
23
SN OWMOBILE
INTAKE PERFORMANCE //
2012-2014 HIGH FLOW INTAKES
More air and cooler air gives you more power and performance. No EFI changes needed.
The 1100T models intake kit comes through the hood.
PART#
AC6000HFI
AC800HFI
AC9000HFI
AC1100THFI
AC800HFI
DESCRIPTION
2014-2016 6000 El Tigre Models
2012-2016 800 F / M / XF Models
2014-2016 9000 M / XF / ZR Models
2012-2013 1100 Turbo F / M / XF Models
PRICE
$25.95
$25.95
$199.95
$199.95
ATV / UTV
BOYESEN RAD VALVES//
AUTOMOTIVE
BOYESEN RAD VALVES
MAXIMUM POWER ACHIEVED THROUGH AIR INTAKE,
ACCELERATION AND DISTRIBUTION
A year ago BOYESEN engineers embarked on a mission to create a
new lineage of aerodynamic intake technology by refining the primary performance factors required to increase peak horsepower through
design innovation: Aerodynamic Surface Optimization, Model-Specific Reed Petal Tensioning, Material Fuel Resistance, and Multi-Stage
Reed Timing. Together, these innovations create a new technological
benchmark in intake performance. The next generation Rage Cage
RC2 series results in an optimized reed valve system that provides superior efficiency, peak horsepower gains, and acceleration for YOUR
specific model sled.
PRECISION CASTING
Your engine is a glutton for air. It will take over 200 “gulps” per second,
at velocities over 500 MPH - if your intake valve will let it. The Rage
Cage’s seamless, one-piece, precision casting and continuous aeroform surfaces ensure maximum flow velocities and instant, explosive
movement of air particles the moment you open the throttle. Result:
An intake valve the size of your fist delivers air with the power of a
tornado.
POWER CHANNELED AIR CHARGE
Integrated into the seamless inner chamber are 4-way aerodynamic
directional dividers that distribute the angled charge evenly without
flow loss. Each channel has its own unique Power Profile, scientifically
shaped to produce instant, explosive movements of air. Result: Unparalleled performance.
INTELLIGENT MULTI-STAGE REED PETAL SYSTEM
Standard equipment on each Rage Cage, Boyesen dual-stage, Pro Series Reeds have the superior ability to time themselves to the needs
of the engine. You get maximum flow velocity across the entire RPM
range, and at all throttle settings. Smooth. Sharp. Smart. Result: Full
Spectrum power and throttle response.
OPTIMIZED FOR EACH MAKE/MODEL/YEAR SLEDl
Each Boyesen Rage Cage is unique - tailor made to that model, year
and displacement. While other aftermarket valves might change
flange sizes or bolt patterns, they’re basically generic - and require you
to irreversibly cut your intake boot to install it! But with the Rage Cage,
there are no compromises in power, no modifications. Result: A true,
bolt-on Power Boost.
BOYESEN RAGE CAGES AND ACCESSORIES
ARCTIC CAT
MODEL
ZR 440/SnoPro
440 Sno Pro
500 / 4000
500 Sno Pro
F5 SaberCat / LXR (EFI)
Crossfire 5
F5 Firecat / Sabercat/M5
Mtn. Cat 500
ZL/ZR 500
Crossfire 6
F6 FCat/SCat/M6/LXR (EFI)
F6 Firecat/Sabercat (Carbureted)
Mtn. Cat 600 (EFI)
Mtn. Cat 600 (Carbureted)
Trip. Touring 600
ZL/ZR 600 (Carbureted & EFI)
ZRT 600
Crossfire 7
F7 Firecat (Carbureted)
F7 Firecat /M7/Sabercat (EFI)
800 H.O. / 8000 / F8 / M800
Crossfire 8 / Crossfire 8 Sno Pro
F8 / F8 Sno Pro / LXR
M8 / M8 Sno Pro
Mtn. Cat 800 (Carbureted)
Mtn. Cat 800 (EFI)
ZR / ZL 800
ZR / ZL 800 (EFI)
ZRT 800
Mtn Cat 900 (Carbureted)
Mtn Cat 900 (EFI)
T-Cat 900
ZR/ King Cat 900 (Carbureted)
ZR/ King Cat 900 (EFI)
Crossfire 1000 / Sno Pro
F1000 / F1000 Sno Pro / LXR
M1000 / M1000 Sno Pro
Mtn Cat 1000 / T-Cat 1000
RAD53-2
24
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
YEAR
98-02
03-04
2015-16
11-14
06-14
07-09
03-06
01-02
99-02
06-11
04-11
04-05
2004
01-03
2000
99-03
97-03
2006
03-06
03-06
10-16
RAGE CAGE
RAD50A-2
RAD51A-2
RAD51B-2
RAD51B-2
RAD51B-2
RAD51B-2
RAD51A-2
RAD50A-2
RAD50A-2
RAD51B-2
RAD51B-2
RAD51-2
RAD51B-2
RAD50A-2
RAD50A-3
RAD50A-2
RAD50A-3
RAD51B-2
RAD51-2
RAD51B-2
RAD53-2
07-09
RAD51C-2
01-02
02-04
01-03
02-03
95-01
03-04
03-04
93-98
03-05
03-06
RAD51-2
RAD51B-2
RAD51-2
RAD51B-2
RAD50A-3
RAD51-2
RAD51B-2
RAD50A-3
RAD51-2
RAD51B-2
07-11
RAD52-2
99-02
RAD50A-3
PRICE
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
$329.95
INTAKE PERFORMANCE //
V-FORCE 3 REED VALVE SYSTEM
Introducing the new VForce 3, by Moto Tassinari. Moto Tassinari has
continued to build upon their industry leading design that doubles
the reed tip surface of a standard reed valve. The advantages of doubling the reed tip surface are numerous. On a VForce, with its less restrictive design, the reed petals only travel half the distance of a standard valve resulting in greater airflow through the entire RPM range
and increasing reed petal life. Throttle response and horsepower is
greatly increased with the addition of a VForce, however fuel economy
is typically also greater, due to the efficiency of a VForce reed valve
system. Exclusive to the VForce 3 is our patent pending snap together
cage design that utilizes symmetrical reed petals, eliminating the need
for different “inner” and “outer” replacement petals. Also new is the patent pending reed tip shape that accelerates the air mixture over the
reed tips, ensuring increased airflow for increased horsepower. The
new design completely eliminates the need for screws. So when you
do need to finally replace your worn reeds the job is literally... a SNAP.
Whether you’re looking for more horsepower, additional RPM’s, higher
efficiency, longer reed petal life or an ultra light replacement for your
heavy conventional stock cages, look no further than the VForce 3, by
Moto Tassinari.
BOLT ON 2-3 HP DEPENDING ON MODEL!
SEE APPLICATION CHART FOR PART NUMBER AND PRICE.
V-FORCE PERFORMANCE REED APPLICATIONS
ARCTIC CAT
MODEL
440 ZR/ZL SnoPro
440 SnoPro
500 ZR/ZL/MC
500 Firecat/Sabercat (Carb)
500 F5/Sabercat/LXR (EFI)
500 M-Series (Carb)
500 Crossfire
500 F-Series/Sabercat
500 Sno Pro 4000
5000 ZR LXR
600 ZR/ZL/MC (Carb)
600 Mtn. Cat (EFI)
600 ZRT
600 Triple Touring
600 F-Series/Sabercat (EFI)
600 M-Series / LXR (EFI)
600 Crossfire
600 Sno Pro
6000 El Tigre
700 Firecat/Sabercat (EFI)
700 M-Series (Carb)
700 M-Series (EFI)
700 Crossfire
800 ZR/ZL/MC/1M Carb
800 ZR/ZL/MC/1M EFI
800 ZRT
800 M-Series / HCR / F-Series
8000 M / XF / ZR
900 ZR/ZL/MC/KC Carb
900 ZR/ZL/MC/KC EFI
900 T-Cat
1000 T-Cat/Powder Special
1000 F-Series
1000 M-Series
YEAR
98-02
03-07
All
All
06-10
All
All
07-11
10-16
14
99-03
2004
All
00
04-05
04-11
06-09
06-09
08-11
14
03-06
03-06
03-06
03-06
2006
01-03
02-04
All
07-13
07-13
14-16
03-05
03-06
All
All
All
All
All
REEDS
PART #
V3110-682A-2
V3112-873A-2
V3110-682A-2
V3112-873B-2
V3112-873B-2
V3112-873B-2
V3112-873B-2
V3112-873C-2
V3112-873C-2
V3112-873C-2
V3110-682A-2
V3110-682A-2
V3110-682A-3
V3110-682A-3
V3112-873B-2
V3112-873B-2
V3112-873B-2
V3112-873B-2
V3112-873B-2
PRICE
$258.00
$258.00
$258.00
$258.00
$258.00
$258.00
$258.00
$258.00
$258.00
$258.00
$258.00
$258.00
$348.00
$348.00
$258.00
$258.00
$258.00
$258.00
$258.00
PETALS
ONLY
3P682M
3P883A
3P682M
3P883A
3P883A
3P883A
3P883A
3P883A
3P883A
3P883A
3P682M
3P682M
3P682M
3P682M
3P883A
3P883A
3P883A
3P883A
3P883A
PRICE
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
GASKETS
ONLY
G3110
G3112
G3110
G3112
G3112
G3112
G3112
G3112
G3112
G3112
G3110
G3110
G3110
G3110
G3112
G3112
G3112
G3112
G3112
PRICE
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
V3112-873B-2
V3112-873B-2
V3112-873B-2
V3112-873B-2
V3112-873B-2
V3112-873B-2
V3112-873B-2
V3110-682A-3
V3112-873B-2
V3112-873B-2
V3112-873B-2
V3112-873B-2
V3112-873B-2
V3110-682A-3
V3110-682A-3
V3112-904-2
V3112-904-2
V3112-904-2
$258.00
$258.00
$258.00
$258.00
$258.00
$258.00
$258.00
$348.00
$258.00
$258.00
$258.00
$258.00
$258.00
$348.00
$348.00
$258.00
$258.00
$258.00
3P883A
3P883A
3P883A
3P883A
3P883A
3P883A
3P883A
3P682M
3P883A
3P883A
3P883A
3P883A
3P883A
3P682M
3P682M
3P904A
3P904A
3P904A
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
$59.95
G3112
G3112
G3112
G3112
G3112
G3112
G3112
G3110
G3112
G3112
G3112
G3112
G3112
G3110
G3110
G3112
G3112
G3112
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
$2.80
9000/1100T HIGH FLOW INTAKE
SHOW 1100T HFI!!!
More air = more power! We have high flow intake kits for most models. You will see up to a 6 horsepower
gain depending on your model. All kits are easy to install so you spend more time on the trail and less
time in the garage.
PART#
AC1100THFI
DESCRIPTION
2012-2016 9000 / 1100T High Flow Intake Kit
PRICE
$199.95
AC1100THFI
K&N HIGH FLOW CLAMP-ON FILTER
These filters are suggested for drag racing or speed run racing ONLY! We do not suggest these for everyday trail riding as they may ice-up in certain situations. ECU re-mapping or fuel map changes may be
required with these filters due to increased air-flow.
RF-1001
SN-2620
PART#
DESCRIPTION
RF-1001
2012-2016 800 Models Clamp-on Filter to Stock Plenum
20-1075
Outerwear Pre-Filter For RF-1001
SN-2620
2012-2016 800 Models & 2003-2011 600/700/800 Models
20-1299
Outerwear Pre-Filter For SN-2620
NOTE: You will need one filter and pre-filter per carb/throttle body.
Shop online 24/7
|
PRICE
$68.02
$21.95
$61.48
$17.45
25
SN OWMOBILE
MACHINE SERVICES //
CYLINDER & CRANK CASE PORTING
Need some extra power? No problem, there is a lot extra left in your motor. Simply send us your cylinders
(and exhaust valves, if your model has them) so our mad scientists can professionally modify the ports
for optimum flow and efficiency. Computer, dyno and field testing are all done to achieve our porting
specs. Don’t be fooled by your neighbor who just came home with a new grinder. Trust the experts, trust
Hot Seat Performance & Speedwerx. Specify trail, lake race, high altitude or full race. Full race porting also
requires you send us your cases, for extensive crankcase porting. We’ve gotta make it flow you know.
NOTE: We here at HSP and Speedwerx are capable of porting just about anything, so don’t be afraid to call
and ask about special jobs!
ATV / UTV
PART #
SPD-PORT
SPD-PORT-R
SPD-CASE2
SPD-CASE3
DESCRIPTION
Trail Cylinder Porting(All Models)
Full Race Cylinder Porting(All Models)
2 Cylinder Crank Case Porting(All Models)
3 Cylinder Crank Case Porting(All Models)
PRICE
$300.00ea
$500.00ea
$200.00
$300.00
SPD-PORT
CYLINDER BORING
AUTOMOTIVE
Our in-house boring bar allows for quick turn-around and expert service for boring cylinders. Renew out
of spec. cylinders or repair damaged cylinders for improved performance. We can bore cylinders for OEM
or aftermarket pistons.
PART #
HSP-BORE-1
HSP-BORE-2
HSP-BORE-3
DESCRIPTION
+.010” - .020”
+.030” - .060”
+.070”+
PRICE
$75.00ea
$100.00ea
$115.00ea
CYLINDER BORING
SPX-TBB
CARB BORING / THROTTLE BODY BORING / BUTTERFLY MODIFICATIONS
If you have rack-style, flatslide carbs and are looking for more flow, we can bore them for you. We can bore
38’s to 40mm and 40’s to 42mm. A definite benefit when used on motors with ported cylinders. If you
want us to disassemble and reassemble your carbs add $100.00/hour.
PART #
HSP-CARB-1
HSP-CARB-3
SPX-TBB
HSP-CARB-L
DESCRIPTION
Twin Cylinder Models
Three Cylinder Models
Throttle Body Boring
Carb/Throttle Body Boring Assembly Labor
HSP-CARB2
PRICE
$200.00
$300.00
$300.00
$100.00/hr
SPX-TBB
ARCTIC CAT OIL INJECTION BLOCK OFF KITS
Eliminate the possibility of an oil pump failure with this oil pump elimination kit. Always have the proper
oil/gas ratio by mixing it yourself. Oil pump, lines and oil tank can then be removed to save weight. Minor
case mods will be required to complete oil injection removal! Saves 7-8 Lbs. over machines with a full oil
bottle!
PART#
DESCRIPTION
ATVBOP*
Plate ‘03-’10 600/700/800/1000 Arctic Cat Models
20005
Xtreme Oil Injection Elimination Kit (No Case Modification Needed)
0644-007
Oil Injection Usage Tool - Measure The Oil Usage in Oil Injection Models
*Requires Speedwerx Case Modification! Failure to do so can cause engine damage!
PRICE
$13.50
$29.95
$58.95
20005
26
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
0644-007
MACHINE SERVICES //
(OLD)
CYLINDER REPLATING
We can repair and replate your damaged Nikasil cylinders to better than new condition. Even extremely
scored cylinders and cracked bridge ports can be repaired at a fraction of the cost of new cylinders.
PART #
REPLATE
W/REPLATE
DESCRIPTION
Replate (All Models)
Weld And Replate Cylinder (All Models)
PRICE
$210.00ea
$290.00ea
(NEW)
CRANKSHAFT TRUE & WELD
For the performance rider or racer, we can also true and weld your crank for lasting durability.
HSP-TW2
PART #
DESCRIPTION
HSP-TW2
Twin Cylinder True and Weld (All Models)
HSP-TW3
Three Cylinder True and Weld (All Models)
NOTE: We also offer complete crankshaft rebuilding! Call for details!
PRICE
$195.00
$295.00
CRANK CASE STUFFING
PART #
SPXCCS
DESCRIPTION
2003-2013 500/600/700/800/1000cc Models
PRICE
$950.00
SPXCCS
Shop online
online 24/7
24/7 || Join
Join our
our e-mail
e-mail list
list online
online to
to receive
receive our
our newsletter!
newsletter!
Shop
27
27
SN OWMOBILE
SPROCKET & CHAIN APPLICATION CHART //
600 SNO PRO RACE SLED SPECIFICATIONS:
2012-2015 Models come with 13 wide / 33T Internal Bottom Sprockets and
13 wide / 19T internal top sprockets. Note: Sno-X models come with a slipper
sprocket on the bottom! (This is a 46T TOS-ASSY).
OEM APPLICATION CHART
ATV / UTV
AUTOMOTIVE
ARCTIC CAT MODEL
YEAR
CHAIN PITCH
TOP GEAR
BOTTOM GEAR
ZR 4000
2015-16
90P/ 13W
21T / 13W
49T / 13W
XF 6000
2014-16
90P/ 13W
22T / 13W
48T / 13W
XF 7000
2014-16
90P / 13W
21T / 13W
49T / 13W
F 800
2012-2013
84P / 13W
21T / 13W
38T / 13W
XF 800
2012
90P / 13W
22T / 13W
48T / 13W
XF 800
2013
84P / 13W
21T / 13W
38T / 13W
XF 8000
2014-16
90P / 13 &15W
22T / 13 &15W
48T / 13W
XF 9000
2014-16
86P / 15W
21T / 15W
41T / 13W
F 1100 TURBO
2012-13
84P / 15W
22T / 15W
37T / 15W
XF 1100 TURBO
2012
90P / 15W
21T / 15W
38T / 15W
XF 1100 TURBO
2013-16
90P / 15W
22T / 15W
37T / 15W
M 6000
2014-16
90P/ 13W
18T / 13W
50T / 13W
M 7000
2015-16
90P/ 13W
21T / 13W
49T / 13W
M 800
2012-13
90P / 13W
21T / 13W
49T / 13W
M/XFHC 8000
2014-16
90P /13 & 15W
19T / 13 &15W
50T / 13W
M/XFHC 9000
2014-16
90P / 13W
21T / 15W
49T / 13W
M 1100
2012
90P/ 13W
21T / 13W
49T / 13W
M 1100 TURBO
2012-13
90P / 15W
21T / 15W
49T / 15W
ZR 5000 LXR
2014-16
90P / 13W
22T / 13W
48T / 13W
ZR 6000
2014-16
90P / 13W
22T / 13W
48T / 13W
ZR 7000
2014-16
90P / 13W
21T / 13W
49T / 13W
ZR 8000
2014-16
86P / 15W
21T / 15W
41T / 13W
ZR 9000
2014-16
84P / 15W
21T / 15W
38T / 13W
600 S/P (SNO-X) (Slipper on Bottom)
2012
90P / 13W
21T / 13W
49T / 13W
600 S/P (CROSS-COUNTRY)
2012
86P / 13W
23T / 13W
40T / 13W
BORG WARNER SPROCKETS & CHAIN
2016 2-STROKE TOP
MATERIAL
MATERIAL DESCRIPTION
2602-943
SPROCKET,BW-18T FWD-(13 WIDE/19 SPLINE)
pwd metal
2602-823
pwd metal
2602-824
pwd metal
2602-825
pwd metal
2602-826
pwd metal
2602-827
pwd metal
2602-828
pwd metal
2602-829
pwd metal
2602-830
pwd metal
2016 2 STROKE AND 4 STROKE BOTTOM
2602-831
SPROCKET,BW-35T(13 WIDE/34 SPLINE)
pwd metal
2602-833
pwd metal
2602-834
pwd metal
2602-836
pwd metal
2602-745
cut steel
2602-790
cut steel
2602-758
cut steel
2602-746
cut steel
2602-940
cut steel
2602-941
cut steel
2602-874
SPROCKET,BW-48T(13 WIDE/34 SPLINE)ALUM
alum
2602-875
alum
2602-876
alum
2602-939
alum
1702-402
SPROCKET,BW 40T TOS-ASSY
1702-403
SPROCKET,BW 49T TOS-ASSY
2016 4 STROKE TOP
1702-410
SPROCKET,BW-21T REV-(13 WIDE/33 SPLINE)
pwd metal
1702-351
cut steel
1702-382
cut steel
1702-352
cut steel
2016 BORG WARNER CHAINS
28
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
2602-837
CHAIN,BORG WARNER-84P (13 WIDE)
2602-743
2602-760
2602-744
2602-944
2602-838
2602-839
2602-840
2602-841
2602-945
www.speedwerx.com
SPROCKETS & CHAIN //
TEAM PERFORMANCE LINK BELT SILENT SPROCKETS & CHAIN
PART NO.
13 Wide Sprockets
931064-008
931064-009
931064-010
931064-011
931064-012
931064-013
931064-014
931064-001
931064-002
931064-003
931064-004
931064-005
931064-006
931064-007
DESCRIPTION
34T Internal Spline
36T Sprocket, Link Belt Silent - 2012-2013 800 AC 2-Stroke
RETAIL
PART NO.
13 Wide Sprockets
931065-013
931065-001
931065-002
931065-003
931065-004
931065-005
931065-006
931065-007
931065-008
931065-009
931065-010
931065-011
931065-012
DESCRIPTION
19T Internal Spline
$34.95
$34.95
$34.95
$34.95
$34.95
$34.95
$34.95
$34.95
$34.95
$34.95
$34.95
$34.95
$34.95
13 Wide Chain
970418
970423
2012-2013 800 AC 2-Stroke
Link Belt Silent Chain. 13 Wide, 88 Link
Link Belt Silent Chain. 13 Wide, 90 Link
PRICE
$94.95
$89.95
$79.95
$79.95
$79.95
$79.95
$79.95
$79.95
$79.95
$79.95
$79.95
$79.95
$79.95
$79.95
$79.95
$79.95
RETAIL
OEM LINK BELT SPROCKETS & CHAIN APPLICATION: 2012-2015 2-Stroke Top Sprockets
13 Wide Sprockets
2602-377
2602-335
19T Internal Spline
Top Sprocket, Link Belt Silent-21T (13 Wide)
$43.95
$43.95
2602-403
$43.95
APPLICATION: 2012-2015 4-Stroke Top Sprockets
13 Wide Sprockets
33T Internal Spline
1702-201
1702-074
$16.95
$16.95
APPLICATION: 2012-2015 2-Stroke & 4-Stroke Bottom Sprockets
13 Wide Sprockets
34T Internal Spline
2602-405
Bottom Sprocket, Link Belt Silent-36T (13 Wide)
2602-406
2602-371
2602-372
2602-364
2602-363
*2602-276
$63.95
$63.95
$63.95
$63.95
$63.95
$63.95
$63.95
APPLICATION: 2012-2015 2-Stroke & 4-Stroke Chain
13 Wide Chain
2602-369
Chain, Link Belt Silent-84P (13 Wide)
2602-514
2602-370
$118.95
$118.95
$118.95
15 Wide Sprockets
19T Internal Spline
2602-212
2602-461
$43.95
$43.95
15 Wide Sprockets
33T Internal Spline
1702-202
1702-191
1702-203
$16.95
$16.95
$16.95
APPLICATION: 2012-2015 2-Stroke & 4-Stroke Chain
15 Wide Chain
2602-365
2602-373
$118.95
$118.95
Shop online
online 24/7
24/7 || Join
Join our
our e-mail
e-mail list
list online
online to
to receive
receive our
our newsletter!
newsletter!
Shop
29
29
SN OWMOBILE
SPECIALTY TOOLS // you need these
CLUTCH PULLERS
Quick drive clutch removal for most machines.
PART #
0644-207
0644-096
0644-100
0744-080
0744-080
MAY NOT LOOK EXACTLY LIKE THIS!
DESCRIPTION
Arctic Cat, Arctic Round Shaft Primary Models (F-7)
Arctic Cat, Comet Primary Models (Short Bolt W/Retainer Plug Style)
Arctic Cat, Comet Primary Models (Long Bolt Style)
Arctic Cat, 4-Roller Primary 2007 1000cc 2-Stroke & 1100cc 4-Stroke
Arctic Cat, 2010-2016 Arctic Cat Models
PRICE
$31.95
$82.95
$82.95
$41.95
$41.95
ATV / UTV
CLUTCH ALIGNMENT TOOLS
Establishes correct offset between drive and driven clutches.
AUTOMOTIVE
PART #
0644-509
0644-320
0644-246
0644-428
0644-427
0644-496
0644-428
0644-588
DESCRIPTION
Arctic Cat, Parallelism Bar 2007+ Models
Arctic Cat, Models With Reverse Cam Secondary (1.365” Offset)
Arctic Cat, 1997 Models With Internal-Helix Secondary (1.562” Offset)
Arctic Cat, Bearcat Wide Track Turbo Model (1.485” Offset)
Arctic Cat, 10.0”ACT Roller Secondary Models (1.655” Offset) (M-Series / Crossfire)
Arctic Cat, 10.4” ACT Roller Secondary Models (1.507” Offset) (F-Series / Z1 Turbo 2007+)
2012 - 2016 Models
2013 Models - (F4 Chassis)
PRICE
$17.95
$25.95
$18.95
$19.95
$19.95
$13.95
$19.95
$12.95
UNIVERSAL PISTON PIN PULLER
A must have for your tool box! There’s nothing worse than bending a rod trying to get a wrist pin out with
a hammer. This puller will fit almost anything. Pulls piston pins up to 127mm (5”) in diameter and has 3
different threaded adaptors to pull pins as small as 10mm (.400”)in diameter.
PART #
SPXPPP
HSPCCT
DESCRIPTION
Universal Piston Pin Puller
PRICE
$69.95
CLUTCH COMPRESSION TOOL
Used to compress the primary clutch while still on the snowmobile for easily changing flyweights. Will
work on all models.
SPXPPP
PART #
HSPCCT
DESCRIPTION
Most Arctic Cat & Polaris Primary Clutches
PRICE
$38.90
UNIVERSAL FLYWHEEL PULLER
This puller has pulled 95% of all flywheels we have ever come across! Constructed of the highest quality
steel and anodized for protection making this thing tough. A must have for your tool box. You’re sure to
pick up a favor or two from your buddies when they need to borrow it. Comes with 3-8mm bolts and
3-6mm bolts to meet most applications.
SPXFWP
PART #
SPXFWP
30
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
DESCRIPTION
Universal Flywheel Puller
www.speedwerx.com
PRICE
$130.00
2009 & NEWER 1100CC 4-STROKE CLUTCH HOLDING FIXTURE
Bolt this fixture to your work bench to securely and safely hold your primary clutch while servicing Arctic
Cat 2009 and newer 1100cc 4-Stroke clutches. MADE IN THE USA!
PART #
AC1100-CHF
DESCRIPTION
2009 -2015 1100cc 4-Stroke Clutches
PRICE
$105.95
AC1100-CHF
2012-2015 SPIDER NUT REMOVAL SOCKET
Make sure you have the proper socket to remove the spider nut on your new machine. If you don’t have
the proper socket you will damage your spider nut and may have to purchase a complete new clutch to
make changes.
PART #
ACSS-12
DESCRIPTION
2012-2015 Spider Nut Removal Socket
PRICE
$79.95
???
ACSS-12
ARCTIC CAT SPIDER REMOVAL KIT
Disassemble/assemble/remove spider on Comet and Arctic Cat drive clutches.
PART #
DESCRIPTION
0644-449
Complete Kit (works on 2016 team primaries w/minor grinding for clearance)
0744-037
Handle
0744-036
Removal Tool
0644-380*
Clutch Holder, 33mm
0744-035**
Clutch Holder, 30mm
AC1100-CHF
Clutch Holder - 2009 And Newer 1100cc 4-Stroke Clutches
0644-138***
Thin Wall Deep Socket, 1-7/16 in.
**Aid in assembling/disassembling of 108 & 102C Comet and Arctic Cat drive clutches.
**Aid in assembling/disassembling of 108 & 102C Comet and Arctic Cat drive clutches.
***Remove and install spider nut on Arctic Cat round-shaft drive clutch.
PRICE
$246.29
$106.95
$82.95
$82.95
$44.95
$105.95
$79.95
0644-449
ARCTIC CAT DRIVEN PULLEY PULLER - ACT
Remove ACT driven pulley from a corroded input shaft. Left-hand thread for models with a white sheave
adjuster. Right-hand thread for models with a black sheave adjuster.
PART #
0644-469
0644-468
DESCRIPTION
ACT Driven Pulley Puller, Left-Hand Thread
ACT Driven Pulley Puller, Right-Hand Thread
PRICE
$28.95
$28.95
0644-468
ARCTIC CAT DRIVE CLUTCH SPANNER WRENCH
Hold Comet and Arctic Cat round-shaft drive clutch in place during removal and installation.
PART #
0644-136
DESCRIPTION
Arctic Cat Drive Clutch Spanner Wrench
PRICE
$50.95
0644-136
UNIVERSAL CLUTCH PRESS TOOL
A revolutionary tool for servicing most primary and secondary clutches. For drive clutch service, this tool
will compress the spring for easy cam arm changes or cover bolt removal. For driven clutch service, the
tool will compress the helix and hold it in place for snap ring removal and installation.
PART #
8080
DESCRIPTION
Clutch Press Tool
PRICE
$64.99
8080
TEAM CLUTCH TOOL
Try our easy to use clutch spring compression tool. More compact and less expensive than competitors.
You’ll like the extra work space this tool won’t take up! Made of durable, impact resistant aircraft quality
steel. It’s also corrosion resistant.
PART #
930001
DESCRIPTION
Clutch Compression Tool For Team Clutches
PRICE
$79.00
930001
Shop online 24/7
|
31
SN OWMOBILE
SUPERCHARGER KITS //
ARCTIC CAT WILDCAT SUPERCHARGER KITS
The performance gained with this kit will blow you away. Not only is the performance great but the quality
of parts and service is unmatched as well. Standard Wildcat models will see 135 HP and X Models 150HP on
pump gas. Race gas applications call!!
ATV / UTV
WHAT ARE THE ADVANTAGES OF THE SPEEDWERX PROCHARGER KIT:
• Stock-like sound levels when using the stock exhaust
• Self contained oiling system (No oil pumps to worry about!)
• Lower under-chassis temps and charge tube temps when compared to a turbo set-up
• Instant throttle response
• Best fuel controller on the market
• Includes wet clutch delete on non X models
• Made in the USA!
PART #
ACSC-WILDCAT-012
ACSC-WILDCATX-013
ACSC-WILDCATX-015
DESCRIPTION
2012-2013 Standard Wildcat Models
2013-2014 Wildcat X Models
2015 Wildcat X Models
PRICE
$6500.00
$6000.00
$6000.00
ACSC-WILDCATX-015
AUTOMOTIVE
KIT INCLUDES:
• Speedwerx Wet Clutch Deletion Kit on non X models
• Speedwerx Clutch kit
• Power Commander PCV boost ready controller
• Pro-Charger Supercharger & intercooler
• All necessary mounting brackets and hardware for complete install
• Blow off Valve
• High flow aluminum air box, charge tubes and inner cooler
• Larger injectors
THIS SPEEDWERX PROCHARGER SUPERCHARGER KIT COMES AS A COMPLETE BOLT-ON KIT.
OPTIONAL CONTENTS:
PART #
AT-300
POD-300
AC1100BBK
ACATVHP-2
PRO-INSTALL
ACWC-CHB
MUFFLER
DESCRIPTION
Dual Channel Auto Tune Module / A/F Ratio Gauge
POD - 300 Data Viewer & Logger
1100cc Big Bore Kit With Pistons
Head Porting & 3 Angle Valve Job (Both Heads)
Speedwerx Professional Install, Test & Tune
Clutch Housing Blower Fan Kit
Q6 or L2
PRICE
$399.99
$249.95
$1345.00
$XXX.00
$1000.00
$1000.00
$389.95
105 HP KITS //
105 HORSEPOWER KIT / ARTIC CAT 1000CC
Want the most out of your 1000cc Wildcat / ATV / or Prowler ? We have the kit to unleash a true 105 hp from
your Arctic Cat machine. We will greatly improve the performance of your machine with our upgrades, this
will unlock the full potential of your machine.
PART #
ACWCX-105HP-KIT
ACWC-105HP-KIT
DESCRIPTION
2013-2015 WCX / 2015 PROWLER / 2015 ATVS
2012-2014 WC / 2008-2014 ATVS / 2010-2014 PROWLER
PRICE
$4099.95
$4099.95
KIT INCLUDES:
• Speedwerx 1100cc Big Bore kit
• Speedwerx Stage 2 Head Porting and Valve Job
• Speedwerx H5 Alloy Valve Springs
• Speedwerx Go Fast Cam Shafts
• Power Commander PCV Fuel Controller
• Speedwerx Slip-on Muffler L2 or Q-6 series
• Speedwerx Custom Forged Pistons 11:1 or 12:1
Optional upgrades:
• ACWC-CHB Clutch housing blower kit $399.95
• Speedwerx Hypershift Clutch kit $199.95-239.95
• Stage 3 Cylinder Head Porting add $1000.00
• SPX-TBB Throttle Body Boring $300.00
ACWCX-105HP-KIT
32
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
CLUTCH HOUSING BLOWER KIT //
CLUTCH HOUSING BLOWER KIT Keep your clutches cool- Heat destroys belts. Why purchase the Speedwerx blower kit over the competition:
• Helps prevent you the customer from spending 200.00 on each belt you to replace
• Its the only kit that modifies the stock clutch cover to draw fresh cool air into the clutches. Others pass air through the stock housing causing the air to heat up before
it even gets to the clutches.
• Fan motor is mounted high behind the cockpit at shoulder level to help prevent water and debris from entering your clutch housing.
• In 20 minutes of riding, machines equipped with the Speedwerx clutch housing blower fan kit seen 50 degree lower temperatures compared to stock in the clutch
housing area.
Our blower kit utilizes a 12 volt DC in-line blower that we install to keep fresh cool air coming into your clutch housing. The intake is covered with a outwears type sock
to help prevent debris and moisture out. We include a full wiring harness that does not require and splicing or soldering. Kit also features a toggle switch that mounts
in the factory location next to the reverse override switch for a clean “ factory “ look.
PART #
ACWC-CHB
DESCRIPTION
2012-2015 WILDCAT / WILDCAT X PRICE
$399.95
KIT INCLUDES:
• High Flow Blower Fan
• Wiring Harness
• On/Off Switch
• Water Proof Intake / Filter Screen
• Modified Clutch Cover ( core exchange program )
• Required hardware
• Detailed Instructions
Optional upgrades:
0806-112 Wildcat cover $ 199.95
0806-129 Wildcat X cover $ 164.95
ACWC-CHB
WET CLUTCH DELETE KITS //
ARCTIC CAT WET CLUTCH DELETE KITS
This kit is designed to eliminate the inner wet clutch on the Arctic Cat 550/650/700/1000cc ATV and UTV lineup. The stock clutch design works good for longevity and durability, but it lacks in overall performance and
tuneability. The Speedwerx Wet Clutch Deletion Kit will help eliminate the lag and power delay that these
units have been known for as well as increase top speed.
This kit removes over 4.5 lbs of rotating weight from the stock clutching set-up. The Primary clutch used is a
Comet clutch that has been used in the snowmobile and ATV industry for 20+ years, it offers unlimited tuning and adjustability. This clutch is very similar to the primary clutches you see on all Polaris ATVs and Polaris
and Arctic Cat Snowmobiles. The Speedwerx kit also comes 100 % complete and ready to install. The stock
clutch cover is the only stock part we modify, all other parts can be returned to stock form if needed. The
clutch cover is modified to accept the new primary clutch and we also put an oversized bearing in the clutch
cover to help support the crank shaft to ensure everything stays in place.
ACPCC
The machine will feel like it has 25-30 more hp than stock, it will be more responsive, accelerate faster and
offer more tuneability than the stock configuration.
KITS INCLUDE:
• New Primary Clutch w/ billet Speedwerx spyder
• Wet Clutch Elimination Shaft and lock collars
• 1 Set of 3 Machined Clutch Weights
• H5 Alloy Primary Spring
• Secondary spring
• Clutch puller
• Alignment and deflection shims
• Replacement OEM gaskets
• Modified Stock Clutch Cover w/ oversized bearing( new covers available at additional cost )
PART #
ACPCC
ACPCC-1000MP
ACPCC-1000P
ACPCC-1000TC
ACPCC-550
ACPCC-550-2
ACPCC-550-3
ACPCC-550P
ACPCC-700
ACPCC-700-2
ACPCC-700-3
ACPCC-700MP
ACPCC-700P
DESCRIPTION
2012-2013 Standard Wildcat Models
All 1000 Mud Pro Models
All 1000 Prowler Models
All 1000 Thundercat / XT Models
All 550 ATV Models 09-13
All 550 XR / Prowler Models 15
All 550 Prowler Models 09-13
All 700 XR / Prowler Models 15
All 700 Mud Pro Models
All 700 Prowler Models 08-13
THE BELOW TEST RESULT ARE WITH A WILDCAT 1000I HO MODEL!
Speed at Distance:
• Seal
• Helix
• Clutch alignment bar
• Primary clutch bolt
• Primary Pilot
Stock 0-60’ 29.88 mph / Clutch Kit installed 30.20 mph
PRICE
$1800.00
$1800.00
$1800.00
$1800.00
$1800.00
$1800.00
$1800.00
$1800.00
$1800.00
$1800.00
$1800.00
$1800.00
$1800.00
Time at Speed info:
Stock 0-30 MPH - 2.42 sec. / Clutch Kit installed 2.36 sec.
Stock 20-50 MPH - 5.89 sec / Clutch Kit installed 4.89 sec. (1 Second Faster!)
Stock 0-50 MPH - 7.24 sec. / Clutch Kit installed 6.23 sec. (1 Second Faster!)
Time at Distance info:
Stock 0-60’ 2.41 sec. / Clutch Kit installed 2.40 sec.
Shop online 24/7
|
33
SN OWMOBILE
ATV & UTV EXHAUST // slip-ons
SLIP-ON EXHAUST SYSTEMS
These ATV Slip-On Exhaust Systems are designed to increase power, add acceleration
and throttle response, lose weight and give your quad a new deeper throatier sound. We
try to keep noise levels to a minimum. Most of our slip-on systems will fall at or below 96
decibels. Carbureted units come with suggested jetting for sea level, summer time riding,
if changes are needed. EFI units come with baseline Power Commander or Boondocker
fuel controller settings if necessary. However, most systems will require no changes to
ATV / UTV
the stock jetting or EFI mapping. All slip-ons are designed to fit with stock OEM bumpers.
Some aftermarket bumpers may affect the sound of the machine. If so we do offer dif-
ACWILDCAT-ATVP-2
ferent end caps to route the exhaust outlet more downward so it will not echo off of the
bumper. Silencers have a custom aluminum shell with steel cores and packing material.
These cans are 100% rebuildable with all inner parts being removable. Our steel end caps
can also be switched and/or converted over to a custom snorkel outlet set-up very easily.
AUTOMOTIVE
ARCTIC CAT
366 Auto 4x4 FIS
400 Auto TBX / TRV
425 CR
450 Auto EFI / TRV
450 XC Auto
550/550s H1 Auto EFI 4x4 / TRV
550 Prowler H1 / XT
650 H1 Auto FIS / TBX / TRV
650 H1 Mud Pro
700/700s H1 Auto EFI 4x4 / TRV
700 Mud Pro
700/700s Prowler XT / XTX
700 H1 Prowler HDX
700 Diesel
Wildcat Trail / Sport
1000 Mud Pro
1000/1000s ThunderCat 4x4 / TRV
1000 Prowler XTZ
1000 HO WILDCAT/WILDCAT X
1000 HO WILDCAT/WILDCAT X
AC1000-ATVP
YEAR
08-11
06-13
11-12
10-12
11-13
09-13
09-13
07-12
07-11
08-13
09-15
08-13
11-13
10-13
14-15
10-14
08-14
09-13
12-14
15
PART #
AC366-ATVP
AC400-ATVP-3
AC425-ATVP
AC450-ATVP
AC450XC-ATVP
AC550-ATVP
ACPXT-ATVP
AC650-ATVP-3
AC650-ATVP-3
AC700-ATVP-2
AC700-ATVP-2
ACPXT-ATVP
AC700-ATVP-2
AC500-ATVP-2
ACWCTRAIL-ATVP
AC1000-ATVP
AC1000-ATVP
ACXTZ-ATVP
ACWILDCAT-ATVP-2
ACWILDCAT-ATVP-3
NOTES
L2 SERIES
L2 SERIES
PRICE
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
Q SERIES
Our new Q6 series mufflers are purpose built and intended for the most extreme
ATV / UTV conditions. They are made to increase power, add acceleration and throttle
response, loose weight, and be maintenance free. Made out of 100 % stainless steel to
prevent rust and corrosion, these mufflers are built to last.
Q6-ACWCTRAIL-ATVP
FEATURES:
• 10% hp gain
• No fuel controller needed ( better results with one though )
• Lighter than stock
• Stainless steel
• Internal Spark arrestor
• Stock like sound levels
• No packing ( maintenance free )
• 1 year full warranty
• Internals are washable for mudding applications
Q SERIES
WILDCAT TRAIL / SPORT MODELS
WILDCAT X MODELS
550 XR MODELS
700 XR MODELS
1000 MUD PRO AND TRV MODELS
700 MUD PRO
34
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
YEAR
14-15
01-15
2015
2015
2015
09-15
PART #
Q6-ACWCTRAIL-ATVP
Q6-ACWILDCT-ATVP
Q6-XR550-ATVP
Q6-XR700-ATVP
Q6-AC1000-ATVP
Q6-AC700-ATVP
NOTES
PRICE
$389.95
$389.95
$389.95
$389.95
$389.95
$389.95
Our Hypershift Clutch Kits are one of the most valuable products available when it comes to enhancing the performance of your ATV/UTV. Each kit is designed and rigorously tested by the staff @ Speedwerx to insure that it will
increase your machine’s acceleration, backshift and all around performance. We offer kits for most applications. We
have kits for stock machines, piped or slightly modified machines, stock machines with oversized tires, piped or slightly
modified machines with oversized tires and kits for higher elevations as well. Most kits but not all include: primary
spring, secondary spring, machined clutch weights and a compound radius helix. All of the proper ingredients to get
your machine ahead of the competition and keep it there. Before ordering take a look at the application charts below
to make sure you get the proper kit for your application. If you have a complete custom unit built for mudding, drags
or whatever, let us know. Our clutching experts can help put a kit together for just about anything.
CKA1000ATV
One of the most popular mods for ATVs today is larger tires. We here at Speedwerx & Hot Seat Performance are aware
of this and understand why you want larger tires. But when installing larger tires 9 out of 10 times your machine will
be slower and/or less responsive. The way to make up for this drastic loss in power and response is to change your
clutching so it matches the tires you’re running. So if you’re planning on installing larger tires on your machine, DON’T
FORGET TO CHANGE YOUR CLUTCHING! If you have any questions please call our tech line.
Speedwerx & Hot Seat Performance have a full line of big wheel clutch kits available for 27”and larger tire sizes. However, some units with 29” or larger tires may require additional changes. If you have 29” or larger tires on your machine,
please let us know and we will match your tire size with your other mods and assemble a kit that will put a smile on
your face!
CKAWILDCATX
ARCTIC CAT CLUTCH KITS / STOCK OR PIPED MACHINES WITH STOCK TIRES!
MODEL
366 Automatic
550 Automatic H1
XR 550
650 Automatic H1
650 Automatic Prowler H1
700 Automatic Mud Pro
700 Automatic H1 EFI / TRV
700 Auto Prowler H1 XTX EFI / HDX
XR 700
Wildcat Trail
Wildcat Sport
YEAR
08-11
10-13
2015
05-12
07-09
11-14
08-13
08-13
2015
14-15
2015
0-2999 FT. PART #
CKA366ATV
CKA550ATV-2
CKA550ATV-3
CKA650ATV
CKAPXTATV-2
CKAMPATV-2
CKA700ATV-2
CKAPXTXATV
CKA700ATV-3
CKAWILDCATTRAIL
CKAWILDCATTRAIL
PRICE
$49.95
$199.95
$ 189.95
$134.00
$130.00
$295.00
$184.00
$363.00
$ 189.95
$ 39.95
$ 39.95
3000-5999 FT. PART #
CKA366ATV-36
CKA550ATV-36-2
CKA550ATV-36-3
CKA650ATV-36
CKAPXTATV-36-2
CKAMPATV-36-2
CKA700ATV-36-2
CKAPXTXATV-36
CKA700ATV-36-3
CKAWILDCATTRAIL
CKAWILDCATTRAIL
PRICE
$49.95
$199.95
$ 189.95
$134.00
$130.00
$295.00
$184.00
$184.00
$ 189.95
$ 39.95
$ 39.95
6000 FT. + PART #
CKA366ATV-6+
CKA550ATV-6+-2
CKA550ATV-6+-3
CKA650ATV-6+
CKAPXTATV-6+-2
CKAMPATV-6+-2
CKA700ATV-6+-2
CKAPXTXATV-6+
CKA700ATV-6+-3
CKAWILDCATTRAIL
CKAWILDCATTRAIL
PRICE
$49.95
$199.95
$ 189.95
$134.00
$130.00
$295.00
$184.00
$184.00
$ 189.95
$ 39.95
$ 39.95
1000 Mud Pro
1000 Automatic Thundercat
1000 Automatic Prowler XTZ
1000 Auto WILDCAT HO
1000 Auto WILDCAT X
1000 Auto WILDCAT 4
10-14
08-13
09-13
12-15
13-15
13
CKA1000MPATV
CKA1000ATV
CKAXTZATV
CKAWILDCAT
CKAWILDCATX
CKAWILDCAT4
$295.00
$315.00
$315.00
$179.95
$239.95
$CALL
CKA1000MPATV-36
CKA1000ATV-36
CKAXTZ-36
CKAWILDCAT-36
CKAWILDCATX-36
CKAWILDCAT4-36
$295.00
$201.00
$201.00
$179.95
$239.95
$CALL
CKA1000MPATV-6+
CKA1000ATV-6+
CKAXTZ-6+
CKAWILDCAT-6+
CKAWILDCATX-6+
CKAWILDCAT4-6+
$295.00
$201.00
$201.00
$179.95
$239.95
$CALL
Comes with 28” Tires Stock
PRICE
$49.95
$199.95
$ 189.95
$134.00
$184.00
$216.00
$ 189.95
$ 39.95
$ 39.95
$201.00
$201.00
$179.95
$239.95
$CALL
3000-5999 FT. PART #
CKA366ATV-36-27
CKA550ATV-36-27-2
CKA550ATV-27-36-3
CKA650ATV-36-27-2
CKA700ATV-36-27-2
CKAPXTXATV-36-27
CKA700ATV-27-36-3
CKAWILDCATTRAIL
CKAWILDCATTRAIL
CKA1000ATV-36-27
CKAXTZ-36-27
CKAWILDCAT-36-27
CKAWILDCATX-36-27
CKAWILDCAT4-36-27
PRICE
$49.95
$199.95
$ 189.95
$134.00
$184.00
$184.00
$ 189.95
$ 39.95
$ 39.95
$201.00
$201.00
$179.95
$239.95
$CALL
6000 FT. + PART #
CKA366ATV-6+-27
CKA550ATV-6+-27-2
CKA550ATV-27-6+-3
CKA650ATV-6+-27-2
CKA700ATV-6+-27-2
CKAPXTXATV-6+-27
CKA700ATV-27-6+-3
CKAWILDCATTRAIL
CKAWILDCATTRAIL
CKA1000ATV-6+-27
CKAXTZ-6+-27
CKAWILDCAT-6+-27
CKAWILDCATX-6+-27
CKAWILDCAT4-6+-27
PRICE
$49.95
$199.95
$ 189.95
$134.00
$CALL
$184.00
$ 189.95
$ 39.95
$ 39.95
$201.00
$201.00
$179.95
$239.95
$CALL
NOTES
ARCTIC CAT CLUTCH KITS / STOCK OR PIPED MACHINES WITH 27”+ TIRES!
MODEL
YEAR
0-2999 FT. PART #
366 Automatic
08-11
CKA366ATV-27
550 Automatic H1
10-13
CKA550ATV-27-2
XR 550
2015
CKA550ATV-27-3
650 Automatic H1
06-12
CKA650ATV-27-2
700 Automatic H1 EFI / TRV
08-13
CKA700ATV-27-2
700 Auto Prowler H1 XTX EFI / HDX
08-13
CKAPXTXATV-27
XR 700
2015
CKA700ATV-27-3
Wildcat Trail
14-15
CKAWILDCATTRAIL
Wildcat Sport
2015
CKAWILDCATTRAIL
1000 Automatic Thundercat
08-13
CKA1000ATV-27
1000 Automatic Prowler XTZ
09-13
CKAXTZ-27
1000 Auto WILDCAT Standard
12-14
CKAWILDCAT-27
1000 Auto WILDCAT X
13-15
CKAWILDCATX-27
1000 Auto WILDCAT 4
13
CKAWILDCAT4-27
Shop online 24/7
|
NOTES
Comes with 28” Tires Stock
35
SN OWMOBILE
HYPERSHIFT™ CLUTCHING COMPONENTS //
6-SERIES MACHINED ADJUSTABLE CLUTCH WEIGHTS
ADJUSTABLE CLUTCH WEIGHTS
These weights are designed specifically for the Artic Cat Wildcat X, Sport & Trail
machines. These weights have more tip weight to them compared to stock for a
more aggressive upshift and hardens belt squeeze later in the shift. Adjustable by
about 2.5 grams heavier than listed wights. Adjustable weight kit sold separately
ATV / UTV
ARTIC CAT CLUTCH WEIGHTS
F-6
(50gr)
G-6
(52gr)
H-6
(54gr)
I-6
(56gr.)
J-6
(58gr)
K-6
(60gr)
L-6
(62gr)
M-6
(64gr)
N-6
(65.5gr)
O-6
(68gr)
P-6
(70.5gr)
Q-6
(72.3gr)
R-6
(74gr)
S-6
(76gr)
SPXAWK
ADJUSTABLE WEIGHT KIT
ADJUSTABLE WEIGHT COMPONENTS
ADJUSTMENT KIT/INDIVIDUAL COMPONENTS
This kit comes with a base of set screws, button head screws, washers and loc-tite
for fine tuning and adjusting your new speedwerx weights. With this kit you can add
from 0.5g - 2.4g per weight. Individual parts are also available.
$66.95ea
$66.95ea
$66.95ea
$66.95ea
$66.95ea
$66.95ea
$66.95ea
$66.95ea
$66.95ea
$66.95ea
$66.95ea
$66.95ea
$66.95ea
$66.95ea
$15.95ea
SPXAWK
AUTOMOTIVE
NOTE: NO BUSHINGS OR SET SCREWS NEEDED FOR
THESE WEIGHTS
CLUTCH SPRINGS
WILDCAT & WILDCAT TRAIL/SPORT
0823-496 PRIMARY ( NEWER VERSION )
MEASURED @ 2.25 AND 1.25
0823-500
51-151 BLK COMES STOCK
0823-509
65-115 BLK
0823-511
52-133 BLK
0823-514
77-134 BLK
0823-513
65-154 BLK
0823-512
77/158 BLK
0823-510
59/214 BLK
$14.95
$54.95
$54.95
$54.95
$54.95
$54.95
$54.95
$15.95
THREADLOCK TUBE
0150425 BLUE - MEDIUM
$2.50
WASHERS
1175203 0.4g
$0.30ea
SET SCREWS
25165
(8-32 x 3/16” ) - 0.3gr
25167
(8-32 x 5/16” ) - 0.5gr
25168
(8-32 x 3/8” ) - 0.6gr
25169
(8-32 x 1/2” ) - 0.9gr
$0.66ea
$0.66ea
$0.66ea
$0.66ea
BUTTON-HEAD SCREWS
24021
(8-32 x 3/16”) - 0.9g
24022
(8-32 x 1/4”) - 1.0g
24691
(8-32 x 5/16”) - 1.1g
24023
(8-32 x 3/8”) - 1.2g
24024
(8-32 x 1/2”) - 1.5g
$0.99ea
$0.99ea
$0.99ea
$0.99ea
$0.99ea
ARCTIC CAT WILDCAT SECONDARY SPRINGS
These clutch springs are to be used for fine tuning calibration and set ups,
depending on your tire size, elevation and/or riding conditions..
WILDCAT & WILDCAT TRAIL/SPORT
0823-386 PRIMARY ( OLD VERSION )
MEASURED @ 2.25” AND 1.25”
0823-401
80-180 BLK/SIL COMES STOCK
0823-467
80-130 BLK/ORG
0823-469
77-158 RED/ORG/SIL
0823-472
90-153 BLK/RED/YEL
0823-471
92-181 BLK/RED/WHT
0823-470
100-182 BLK
0823-468
105-260 RED/GOLD/SIL
ADJUSTMENT KIT
SPXAWK Adjustment Kit
$10.95
$62.95
$62.95
$62.95
$62.95
$62.95
$62.95
PART #
210412
DESCRIPTION
78-198 - BLACK/RED/GREEN
PRICE
$24.95
210463
210451
210464
0823-411
125-190 - BLACK W/PART #
105-163 - BLACK
$24.95
$24.95
$24.95
$24.95
WILDCAT TRAIL/SPORT SECONDARY CLUTCH SPRINGS @
2.345” AND 1.28”
0823-523
115-190 BLK
$62.95
0823-522
139-195 BLK
$62.95
0823-443
104-173 BLK COMES STOCK
$14.95
SPEEDWERX SPEC H5 ALLOY
SECONDARY SPRING @ 2.5” AND 1.4”
CCH5-p-115-190
115-190 BLK/PINK
$39.95
ARCTIC CAT PRIMARY CLUTCH SHAFT SHIMSFOR WET CLUTCH MODELS
These shims are designed to space out the
primary clutch on your machine, allowing the
belt to rid up higher in the driven clutch, which
in turn allows your machine to start off in a lower
gear giving it a tourqier feel. Shim thickness
depends on clutch and belt wear, some models
will not allow for any shims due to clutch cover
and belt clearance.
C132017
C132018
.060" WASHER
.080" WASHER
SLICK SHIFT BEARING / DELRIN WASHER
FOR WILDCAT TRAIL / SPORT MODELS
C132017
$5.95
$5.95
Under development at the time of print. This washer / bearing is designed to
eliminate spring binding between the spring and clutch to ensure maximum
performance at tall times.
This product is currently under development contact
Speedwerx for updates $ CALL
36
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
ARCTIC CAT CLUTCH ROLLER WEIGHTS
The primary function of the clutch roller weight is to control the engines operating rpm. We offer 4 different grams of rollers
which will allow you to mix and match so you can come up with several different combinations in overall weight if you are
tuning or setting up your own clutching. The other difference in our clutch rollers is the diameter. Our rollers are a smaller diameter than the stock units which opens up the primary clutch more and allows the belt to drop down in the primary clutch
farther so you start off in a lower gear ratio, thus, giving you better acceleration, better throttle response, more pulling power
and less belt slippage which means longer belt life. Our rollers also come as a complete assy. So you just have to drop them
into place and go. There is no pressing, swapping or changing out existing parts with your stock ones to make these work.
PART #
ACCRW-15
ACCRW-20
ACCRW-25
ACCRW-30
WEIGHT
15 Gram
20 Gram
25 Gram
30 Gram
PRICE
$17.10
$17.10
$17.10
$17.10
STOCK WEIGHT CLASSIFICATIONS
RED
18.5 Gram
GREEN
23.5 Gram
BLUE
21 Gram
WHITE
17-27 Gram (Depends On Model)
BLACK
33.5 Gram
ACCRW-20
INNER WET CLUTCH SPRINGS (ENGAGEMENT SPRINGS)
These springs will allow you to raise your machines engagement rpm for better acceleration and response!
These springs will raise the engagement approx. 200-400 RPM.
APPLICATIONS:
03-10 400 Auto | 00-10 500 Auto | 05-10 650 H1 Auto | 06-08 700 EFI | 06-10 650 Prowler H1 | 08-10 Thundercat 1000 / 08-10 Prowler 700 XTX | 08-10 700 H1 | 09-10 700 Mud Pro | 09-10 Prowler XTZ 1000 | 2010
1000 Mud Pro / Most Yamaha & Suzuki Models
DESCRIPTION
PART #
42 Lbs. Engagement Springs (5-Pack)
210267
54 Lbs. Engagement Springs (5-Pack)
955556
NOTE: Stock primary engagement springs are about 20-25 Lbs. - 1400 RPM!
ENGAGEMENT RPM
1800 RPM
2300 RPM
PRICE
$49.95
$49.95
ARCTIC CAT & SOME SUZUKI SECONDARY SPRINGS
These secondary springs are designed to help fine tune and adjust the shifting characteristics to meet the
needs for custom applications and/or clutch kits. We offer several different rates. These springs will not fit all
models. The compression springs are designed for Arctic Cat quads without the new ‘06 updated clutch or ‘07
650 H1/Prowler 650 H1 secondary clutch with the removable helix. Our springs do not have tines on them for
torsional load either.
COMPRESSION SECONDARY SPRINGS
These springs fit models with NON-HELIX style secondary clutches.
COMPRESSION SPRING
PART #
CCS-350-150-250-200
CCS-350-175-250-225
CCS-350-200-250-250
CCS-350-250-250-300
COLOR
RED
BLUE
LIME GREEN
BLACK
RATE
150-200
175-225
200-250
250-300
PRICE
$29.95
$29.95
$29.95
$29.95
TORSIONAL SECONDARY SPRINGS
These springs fit models with NON-HELIX style secondary clutches.
TORSION SPRING
SPEEDWERX NOTES:
2005 650 H1
2006 Prowler H1
Stock Arctic Cat Helix Style Models
WILDCAT / 650/700 MUDPRO
1000 MUDPRO
PROWLER 550XT / 650 / 700XTX
STOCK 69-100
STOCK 150-200
STOCK 160-200 (TORSIONAL)
STOCK 190-235
STOCK 195-275
STOCK 120-160
PART #
210268
210301
210275
COLOR
500/650 H1/ AC & SUZUKI MODELS
400 AC MODELS ONLY
500/650 H1/ AC & SUZUKI MODELS
RATE
75-150
110-150
84-119
COLOR
BLACK
LIME GREEN
YELLOW
PRICE
$24.95
$24.95
$24.95
TORSIONAL SECONDARY SPRINGS
These springs fit models with HELIX style secondary clutches.
PART #
CTH5-L-200-250
CTH5-L-120-160
CTH5-L-160-200
CTH5-L-190-235
CTH5-L-195-275
COLOR
BLACK/BLUE
BLACK/WHITE
BLACK/RED
BLACK/ORANGE
BLACK/GREEN
RATE
200-250
120-160
160-200
190-235
195-275
PRICE
$39.95
$39.95
$39.95
$39.95
$39.95
Shop
Shop online
online 24/7
24/7 || Join
Join our
our e-mail
e-mail list
list online
online to
to receive
receive our
our newsletter!
newsletter!
37
37
SN OWMOBILE
ARCTIC CAT WILDCAT X HELIXES
With bigger tires or more horsepower, you need to adjust helix angle to optimize belt traction.
PART #
422194
422195
420196
422197
422198
CUSTOM
DESCRIPTION
50-60 Full
52 Straight
54 Straight
56 Straight
58 Straight
CALL TO ORDER
PRICE
$79.00
$79.00
$79.00
$79.00
$79.00
$99.00
ATV / UTV
ARCTIC CAT SECONDARY HELIXES
AUTOMOTIVE
The secondary helix helps control upshift and backshift characteristics on your ATV. We offer a variety
of angles to meet the needs for all applications. If you have any questions please contact our technical support department.
PART #
ANGLE
ACATV54-44-.33
54-44-.33
ACATV54-44-.46
54-44-.46
ACATV50-44-.33
50-44-.33
ACATV50-44-.46
50-44-.46
ACATV30STR
30 Straight
ACATV45STR
45 Straight (Stock 2012-13 Wildcat Replacement)
NOTE: More angles coming soon! Custom angles available upon request!
PRICE
$120.00
$120.00
$120.00
$120.00
$120.00
$120.00
ECU RE-PROGRAMMING //
WILDCAT / WILDCAT X / WILDCAT 4 ECU RE-MAPPING
Speedwerx can re-map your stock ECU box to perform with better power, acceleration and top speed.
Send us your ECU box and we will re-program it with our custom Stage I or Stage III
performance programming
STAGE I
With the Stage I re-program you will get a raised rev-limit (8200 RPM). You will be
required to use premium pump fuel at all times whe you have your ECU box reprogrammed by Speedwerx.
STAGE III
With the Stage III re-program you will get new fuel & ignition curves as well as a
raised rev-limit (8200 RPM). You will be required to use premium pump fuel at all
times whe you have your ECU box re-programmed by Speedwerx.
PART #
DESCRIPTION
PRICE
*RPI-WC-1
Standard Wildcat Models - Stage I Re-Mapping
$379.95
*RPI-WC-3
Standard Wildcat Models - Stage III Re-Mapping
$379.95
*RPI-WC4-1
Wildcat Models - Stage I Re-Mapping
$379.95
*RPI-WC4-3
Wildcat Models - Stage III Re-Mapping
$379.95
*RPI-WCX-1
Wildcat X Models - Stage I Re-Mapping
$379.95
0530-064
Stock ECU - Standard Wildcat Models
$391.95
0530-099
Stock ECU - Wildcat X Models
$391.95
*All prices above are for re-programming only! You will need to send us your ECU box or buy a new stock
ECU box from us and we can send it to you after it has been re-programmed.
RPI-WC-1
38
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
FUEL CONTROL // power commander
POWER COMMANDER FUEL CONTROLLERS
The Power Commander is a fuel injection adjustment unit that plugs “inline” with the bike’s stock
ECU (electronic control unit). The PC uses original equipment style connectors, so no splicing or
cutting of the harness is required. Most installations take less than 15 minutes, some as little as 5
minutes.
Changes are made to the bikes fuel and, in some cases, ignition curves via the PC’s onboard
microprocessor. Using this technology we are able to offer a large area of adjustment without making any permanent changes to the bike’s ECU. Removing the PC returns the bike to its previous
stock condition. Each unit comes complete with software and cable link that allows you to change
between different maps or make adjustments to a map file.
PCV
PCIII USB
POWER COMMANDER V (PCV):
• Reduced Size (Less than half the size of PCIII)
• USB Powered From Computer (9 Volt Adaptor is no longer needed for programming)
• 2 Position Map Switching Function Built In (Map switch not included)
• Gear / Speed Input (Allows for map adjustment based on gear and speed)
• 10 Throttle Position Columns (Up from 9 on the PCIII)
• Enhanced “Accel Pump” Utility (Increased adjustment and sensitivity ranges)
• Analog Input
• -100% / +250% Fuel Change Rate (Allows more adjustment range)
(Allows user to use any 0-5 volt sensor and built an adjustment table based on its input such
as boost or temperature)
POWER COMMANDER III USB (PCIII):
• Works With Any Exhaust
• -100% / +100% Fuel Change Rate
• Expandable With: Ignition Module / Color LCD Display / Multi-Function Hub
• Easy Installation - No Cutting Or Splicing!
ARCTIC CAT
450 H1
450 / 500 Models
550 H1
700 Prowler XTX
700 EFI (Suzuki Engine)
700 H1
700 H1
700 Models
700 Wildcat Trail / Sport
Thundercat 1000 / XT
Thundercat 1000 / XT
*Thundercat 1000
1000 TRV
*1000 TRV
1000 TRV/MudPro
Prowler 1000 XTZ
Wildcat 1000 HO
Wildcat 1000 HO
YEAR
2010-2012
2013
2009-2014
2008
2006-2007
2008
2009-2012
2013
2014-2015
2008
2008-2013
2008-2013
2009
2009
2010-2014
2009-2013
2012-2014
2015
PCIII USB
•
•
•
623-411
616-411
630-411
•
•
•
622-411
•
•
•
•
•
•
•
•
PRICE
•
•
•
$369.95
$369.95
$369.95
•
•
•
$369.95
•
•
•
•
•
•
•
•
PCV
11-008
11-016
11-005
•
•
•
11-006
11-014
11-019
•
11-002
11-011
11-002
11-011
11-017
11-001
11-010
11-023
PRICE
$379.95
$379.95
$379.95
•
•
•
$379.95
$379.95
$379.95
•
$379.95
$399.95
$379.95
$399.95
$379.95
$379.95
$379.95
$379.95
* FUEL & IGNITION ADJUST
POD-300
POD-300 DATA VIEWER & LOGGER
AT-200
THE POD-300 IS AN ACCESSORY DISPLAY FOR DYNOJET DEVICES THAT SUPPORT DJ-CAN; INCLUDING
THE POPULAR POWER COMMANDER V, AUTOTUNE, WIDEBAND 2, AND CMD.
Simply connect the included CAN cable and you’re ready to go; there’s no need to
tap power or deal with other messy connections.
AUTO TUNE MODULE
DYNOJET IS PLEASED TO BE ABLE TO BRING YOU THE LATEST IN TUNING ACCESSORIES. WE NOW OFFER
A WIDE BAND AUTO TUNE KIT THAT CAN BE USED WITH ANY POWER COMMANDER V.
The Dynojet Auto Tune Kit plugs into the PCV with a single cable. The only other connections needed are a +12 volt and a ground. With the Auto Tune Kit connected the
user can specify what air/fuel ratio (how rich or lean) to make each specific RPM and
throttle position % combination. This makes it possible to adjust cruise for best fuel
economy as well as larger throttle openings for peak power. Dynojet includes base
settings for the air/fuel ratios, but they are fully adjustable if need be.
PART #
AT-200
AT-300
48292001
DESCRIPTION
Single Channel Single Cylinder - PCV Models Only! (Acts as an O2 Gauge!)
Dual Channel Twin Cylinder - PCV Models Only! (Acts as a dual O2 Gauge!)
Replacement O2 Sensor for All AutoTune Kits
Handle Bar Mount
PRICE
$279.99
$399.99
$99.85ea
Need to adjust your tune in the field, or datalog the supported channels to further
refine your tune? No problem, with the POD-300 you’re just a few clicks away from
taking advantage of the many features with it’s easy to use menu system.
• Display channels real-time: RPM, TP, map position (when using map switch), duty cycle, fuel change, speed,
pressure, ignition change & wideband air/fuel ratio- (w/WB2 or AutoTune connected)
• Real time fuel adjustments
• Weather resistant for use in all conditions
• Log channels saved to internal memory and can be viewed / analyzed with Dynojet’s PowerCore Software
• High contrast display, viewable in direct sunlight
• 3 Programmable light alarms
PART #
26300062
DESCRIPTION
POD Commander - 300 Data Viewer & Logger
PRICE
$249.99
61300062
76950145
76950143
76950117
76950690
76950680
76950530
Handle Bar mount for POD Commander - 300 Display
6” Can Cable
18” Can Cable
36” Can Cable
6’ Can Cable
10’ Can Cable
20’ Can Cable
$59.95
$14.00
$ 14.00
$15.00
$16.00
$ CALL
$ CALL
Shop online 24/7
|
39
SN OWMOBILE
K&N // air and oil filters
ARCTIC CAT
K&N AIR FILTERS
K&N Replacement Air Filters are ideal for extended use in dirty and dusty
off-road riding and provide clean carburetion even at high altitude. As a
rule, no jet changes are required with just a K&N Filter Element, however
the spark plug condition should be checked for proper mixture after the
first few miles of riding. If the airbox has been modified for increased air
flow, the main jet size will need to be increased to provide the proper fuel
mixture. Replacement air filters are available for most street bikes, sport
bikes, dirt bikes, cruisers, dual sport bikes, touring bikes, ATV’s and more!
ATV / UTV
HERE ARE SOME INTERESTING FACTS ABOUT K&N AIR FILTERS:
• DESIGNED TO INCREASE ACCELERATION & HORSEPOWER
• WASHABLE AND REUSABLE
• WILL NOT VOID US WARRANTY
• EMISSION LEGAL IN ALL 50 US STATES
ALL 250 / 300
250/300 2x4 / 4x4
366
400 Auto/Manual (not DVX)
400/454
500
500
550 H1
650 V-Twin
650 H1
650 H1
700 H1 / 700i
700 SUZUKI MOTOR
650 PROWLER XT H1
700 PROWLER XTX H1 EFI/LE
1000 THUNDERCAT / Mud Pro
1000 WILDCAT / WILDCAT X
YEAR
06-13
98-05
08-11
06-13
96-05
98-02
05-09
09-13
04-06
05-06
07-12
08-13
06-08
06-07
08-12
08-13
12-15
AIR FILTER
KY-2504
AC-3098
•
AC-4004
AC-4096-1
AC-4096-1
AC-4004
AC-7009
AC-6504
AC-6504
AC-4004
AC-7009
•
AC-4004
AC-7009
AC-1009
AC-1012
PRICE
OIL
PRICE
$64.50
$65.00
•
$74.55
$61.53
$61.53
$74.55
$65.00
$64.33
$64.33
$74.55
$65.00
•
$74.55
$65.00
$65.00
$75.00
FILTER
•
KN-132
KN-621
KN-621
KN-138
KN-138
KN-621
KN-621
KN-204
KN-621
KN-621
KN-621
KN-621
KN-621
KN-621
•
•
•
$6.49
$13.49
$13.49
$13.99
$13.99
$13.49
$13.49
$13.99
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
•
•
AUTOMOTIVE
PL-1003
K&N OIL FILTERS
Originally developed for demanding race applications, the K&N Premium
Oil Filter is rapidly becoming a favorite among consumers for its durability
and easy removal. Many of the K&N Technicians are racers and they insisted
that the company offer an oil filter that corrected the “headaches” they
experienced over the years changing oil filters. K&N Replacement Oil Filters
features a new, high-quality rubber anti-drain back valve, an improved
pressure relief valve, a strong inner core and a heavy duty base plate with
an improved rolled seal. “Spin-on” oil filters feature a heavy-duty metal can
with a 17mm cross drilled nut.
KN-303
40
40
Speedwerx,
Speedwerx,Inc.
Inc. | | 651.982.6020
651.982.6020 or
or 651.982.0600
651.982.0600 | | www.speedwerx.com
www.speedwerx.com
SPECIALTY TOOLS // you need these
CLUTCH PULLERS
Quick drive clutch removal for most machines.
PART #
352251
0744-080
DESCRIPTION
ARCTIC CAT, 650 V-Twin Models Primary Clutch Puller
Wildcat Models
PRICE
$34.95
$41.95
CLUTCH ALIGNMENT TOOLS
Establishes correct offset between drive and driven clutches.
PART #
ABAR-AC1000
DESCRIPTION
ARCTIC CAT, STOCK 1000cc Models STO Wildcat
PRICE
$24.95
UNIVERSAL CLUTCH PRESS TOOL
A revolutionary tool for servicing most primary and secondary clutches. For drive clutch service, this tool
will compress the spring for easy cam arm changes or cover bolt removal. For driven clutch service, the
tool will compress the helix and hold it in place for snap ring removal and installation.
PART #
8080
DESCRIPTION
Clutch Press Tool
PRICE
$64.99
8080
TEAM CLUTCH TOOL
Try our easy to use clutch spring compression tool. More compact and less expensive than competitors.
You’ll like the extra work space this tool won’t take up! Made of durable, impact resistant aircraft quality
steel. It’s also corrosion resistant.
PART #
930001
DESCRIPTION
Clutch Compression Tool For Team Clutches
PRICE
$79.00
930001
TEST PLUG / ERROR CODE READER
Test / reset error codes on Arctic Cat 700 EFI & 1000 EFI models.
PART #
0486-219
DESCRIPTION
Test Plug / Error Code Reader
PRICE
$4.95
Shop online
online 24/7
24/7 || Join
Join our
our e-mail
e-mail list
list online
online to
to receive
receive our
our newsletter!
newsletter!
Shop
41
41
SN OWMOBILE
PERFORMANCE HEADERS //
RACE CAR HEADERS
FEATURES:
ATV / UTV
- Tested and proven to be better against competition on the dyno and on the track.
- 20 years experience manufacturing exhaust.
- Three stage equal length primarys
- Computer designed
- Custom designs and fits available to meet engine builders or racers needs
- Stainless systems are purged welded for the smoothest finish inside
- 1000’s of feature wins
- Built by racers, for racers!
- Tri-y
- 4-1 Merge
- 4-1 Non Merge
- Crate 602/604/525
- Mild Steel
- Stainless Steel
APPLICATIONS:
AUTOMOTIVE
42
Circle Track / Performance Street / Hot Rod / Drag Race / Off-Road / More
CHASSIS AVAILABLE
MB CUSTOMS
SHAW
TAYLOR
SSR
GRT
J-CAR
FASTTRACK
FEGERS
MASTERSBILT
TRC
HUGHES
ELITE
PRO
MILLENIUM
IMPRESSIVE
SWARTZ
ROCKET
PIRECE
HUSTLER
BEAK BUILT
AFFORDABLE
BARRY WRIGHT
CAPITAL
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
made
here.
HEADER // flanges / mufflers / turn downs / hangers / bolts
MUFFLERS
Our mufflers are designed to be lightweight and reduce noise without sacrificing performance.
PART #
MI2753
MI335
MI354
M2753
M335
M354
CHASSIS FIT
UNIVERSAL
UNIVERSAL
UNIVERSAL
UNIVERSAL
UNIVERSAL
UNIVERSAL
DESCRIPTION
MUFFLER INSERT 2.75" ID FITS 3" EXHAUST
MUFFLER INSERT 3.0" ID FITS 3.5" EXHAUST
MUFFLER INSERT 3.5" ID FITS 4.0" EXHASUT
SLIP-ON MUFFLER 3.0" EXHAUST
PRICE
$39.95ea
$39.95ea
$39.95ea
$59.95ea
$59.95ea
$59.95ea
INSERT MUFFLER
SLIP-ON TURN-DOWNS
PART #
TD3
TD35
TD4
CHASSIS FIT
UNIVERSAL
UNIVERSAL
UNIVERSAL
DESCRIPTION
TURN DOWN - SLIPS ONTO 3" TUBE
TURN DOWN - SLIPS ONTO 3.5" TUBE
TURN DOWN - SLIPS ONTO 4" TUBE
PRICE
$29.95ea
$29.95ea
$29.95ea
HANGERS / MOUNTING TABS
Additional hangers and supports help to reduce vibration & cracking.
PART #
MT-12-3473
DESCRIPTION
STAINLESS STEEL REAR SUPPORT / MOUNTING TABS
PRICE
$2.25ea
DESCRIPTION
ELECTROLESS NICKLE PLATING
CERAMIC COATING
PRICE
$510.00/set
$330.00/set
SLIP-ON MUFFLER
COATINGS
PART #
EN-HEADERS
CC-HEADERS
DETAILS
DOES INSIDE AND OUTSIDE TO PREVENT CORROSION
OUTSIDE ONLY
HEADER BOLTS & NUTS
PART #
1123215
37260
73470
70796
DESCRIPTION
1/4"-20 X 3" SHC - STANDARD BLACK OXIDE BOLT
STANDARD NUT
1/4"-20 X 3" SHC - STAINLESS STEEL BOLT
STAINLESS STEEL NUT
TURN DOWN
PRICE
$0.60ea
$0.20ea
$1.30ea
$0.65ea
HEADER FLANGE BOLTS
PART #
1173540
1123305
DESCRIPTION
3/8"-16 X 1" SHCS - STAINLESS STEEL
3/8"-16 X 1" SHCS
PRICE
$1.56ea
$0.75ea
Shop
Shop online
online 24/7
24/7 || Join
Join our
our e-mail
e-mail list
list online
online to
to receive
receive our
our newsletter!
newsletter!
43
43
SN OWMOBILE
MERGE COLLECTORS & MANDREL BENDS //
WE WILL HAVE MORE APPLICATIONS AVAILABLE SOON! IF YOU ARE IN NEED OF A CUSTOM BEND OR IF YOU
JUST HAVE A QUESTION, PLEASE CALL FOR MORE INFORMATION - 651-982-6020
MACHINED MERGE COLLECTORS
ATV / UTV
SPEEDWERX, Inc. Merge Collectors (Header Collectors) are custom engineered and machined for each application. All of our Machined Merge Collectors are designed with a
CAD software program and then they are CNC machined for precision. Merge Collectors combine high flow and high velocity to increase and broaden an engine’s torque
curve all the way to the horsepower peak and beyond.
All of our products feature the highest quality fabrication and TIG-welding. Each collector is completely hand finished inside for proper flow.
We can custom make each Machined Merge Collector to fit your application. If you
need a specific inlet leg length or outlet length don’t worry, we have you covered!
AUTOMOTIVE
MACHINED MERGE COLLECTORS - MILD STEEL
PART #
MMC-1625-18-MS
MMC-1750-18-MS
MMC-1875-18-MS
MMC-2000-18-MS
MMC-2125-18-MS
MMC-2250-18-MS
OD
1.625”
1.750”
1.875”
2.000”
2.125”
2.250”
GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
MATERIAL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
PRICE
CALL FOR CURRENT PRICE
MACHINED MERGE COLLECTORS - 304 STAINLESS STEEL
PART #
MMC-1625-18-SS
MMC-1750-18-SS
MMC-1875-18-SS
MMC-2000-18-SS
MMC-2125-18-SS
MMC-2250-18-SS
OD
1.625”
1.750”
1.875”
2.000”
2.125”
2.250”
GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
MATERIAL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
PRICE
15˚ BENDS (TRI-Y / COLLECTOR BENDS) - MILD STEEL
PART #
15B-1625-3-18-MS
15B-1750-3-18-MS
15B-1875-3-18-MS
15B-2000-3-18-MS
15B-2125-3-18-MS
15B-2250-3-18-MS
TYPE
15˚ BEND
15˚ BEND
15˚ BEND
15˚ BEND
15˚ BEND
15˚ BEND
OD
1.625”
1.750”
1.875”
2.000”
2.125”
2.250”
CLR
3”
3”
3”
3”
3”
3”
GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
MATERIAL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
PRICE
15˚ BENDS (TRI-Y / COLLECTOR BENDS) - 304 STAINLESS STEEL
PART #
15B-1625-3-18-SS
15B-1750-3-18-SS
15B-1875-3-18-SS
15B-2000-3-18-SS
15B-2125-3-18-SS
15B-2250-3-18-SS
44
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
www.speedwerx.com
TYPE
15˚ BEND
15˚ BEND
15˚ BEND
15˚ BEND
15˚ BEND
15˚ BEND
OD
1.625”
1.750”
1.875”
2.000”
2.125”
2.250”
CLR
3”
3”
3”
3”
3”
3”
GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
MATERIAL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
PRICE
JEREMY HOULE - MIDWEST MODIFIED
D
MERGE COLLECTORS & MANDREL BENDS //
45˚ BENDS - MILD STEEL
PART #
45B-1625-3-18-MS
45B-1750-3-18-MS
45B-1875-3-18-MS
45B-2000-3-18-MS
45B-2125-3-18-MS
45B-2250-3-18-MS
TYPE
45˚ BEND
45˚ BEND
45˚ BEND
45˚ BEND
45˚ BEND
45˚ BEND
OD
1.625”
1.750”
1.875”
2.000”
2.125”
2.250”
CLR
3”
3”
3”
3”
3”
3”
GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
MATERIAL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
PRICE
CLR
3”
3”
3”
3”
3”
3”
GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
MATERIAL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
PRICE
MATERIAL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
PRICE
45˚ BENDS - 304 STAINLESS STEEL
PART #
45B-1625-3-18-SS
45B-1750-3-18-SS
45B-1875-3-18-SS
45B-2000-3-18-SS
45B-2125-3-18-SS
45B-2250-3-18-SS
TYPE
45˚ BEND
45˚ BEND
45˚ BEND
45˚ BEND
45˚ BEND
45˚ BEND
OD
1.625”
1.750”
1.875”
2.000”
2.125”
2.250”
U-BENDS (180˚ BEND WITH 6-8” LEGS) - MILD STEEL
PART #
UB-1625-3-18-MS
UB-1750-3-18-MS
UB-1875-3-18-MS
UB-2000-3-18-MS
UB-2125-3-18-MS
UB-2250-3-18-MS
TYPE
U-BEND
U-BEND
U-BEND
U-BEND
U-BEND
U-BEND
OD
1.625”
1.750”
1.875”
2.000”
2.125”
2.250”
CLR
3”
3”
3”
3”
3”
3”
GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
U-BENDS (180˚ BEND WITH 6-8” LEGS) - 304 STAINLESS STEEL
PART #
UB-1625-3-18-SS
UB-1750-3-18-SS
UB-1875-3-18-SS
UB-2000-3-18-SS
UB-2125-3-18-SS
UB-2250-3-18-SS
TYPE
U-BEND
U-BEND
U-BEND
U-BEND
U-BEND
U-BEND
OD
1.625”
1.750”
1.875”
2.000”
2.125”
2.250”
CLR
3”
3”
3”
3”
3”
3”
GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
MATERIAL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
PRICE
COMBO BENDS (180˚ BEND WITH 45˚TAIL ON ONE LEG) - MILD STEEL
PART #
CB-1625-3-18-MS
CB-1750-3-18-MS
CB-1875-3-18-MS
CB-2000-3-18-MS
CB-2125-3-18-MS
CB-2250-3-18-MS
TYPE
15˚ BEND
15˚ BEND
15˚ BEND
15˚ BEND
15˚ BEND
15˚ BEND
OD
1.625”
1.750”
1.875”
2.000”
2.125”
2.250”
CLR
3”
3”
3”
3”
3”
3”
GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
MATERIAL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
MILD STEEL
PRICE
COMBO BENDS (180˚ BEND WITH 45˚TAIL ON ONE LEG) - 304 STAINLESS STEEL
PART #
CB-1625-3-18-SS
CB-1750-3-18-SS
CB-1875-3-18-SS
CB-2000-3-18-SS
CB-2125-3-18-SS
CB-2250-3-18-SS
TYPE
15˚ BEND
15˚ BEND
15˚ BEND
15˚ BEND
15˚ BEND
15˚ BEND
OD
1.625”
1.750”
1.875”
2.000”
2.125”
2.250”
CLR
3”
3”
3”
3”
3”
3”
GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
18 GAUGE
MATERIAL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
STAINLESS STEEL
PRICE
Shop online 24/7
|
45
Accent Logo
made
here.
SPEEDWERX GOODIES // apparel / banners / decals / koozies
Accent Logo
INE
ONL IGNS
K
C
ES
CHE EW D
N
FOR
made
here.
made
here.
made
here.
made
here.
SPEEDWERX PERFORMANCE HOODY
PART #
HOODY2012
HOODY2012
SPEEDWERX PERFORMANCE T-SHIRT
DESCRIPTION
Hoody, Black
Hoody, Black
PRICE
$45.00 (S-XL)
$50.00 (2XL-3XL)
DESCRIPTION
Beanie, Speedwerx
PRICE
$15.00
DESCRIPTION
Black Speedwerx T-Shirt
SPEEDWERX PODIUM POLO SHIRT
PRICE
$20.00 (S-3XL)
SPEEDWERX PERFORMANCE FLEX FIT CAP
BEANIES
PART #
SPXTH
PART #
SPXTEE
PART #
FFHATSM
FFHATLXL
GFFHATSM
GFFHATLXL
DESCRIPTION
Flex Fit, Red/WHite/Blue S-M
Flex Fit, Red/WHite/Blue L-XL
Flex Fit, Green S-M
Flex Fit, Green L-XL
PRICE
$24.00
$24.00
$24.00
$24.00
PART #
SPXPOLO
DESCRIPTION
PodiumPolo, Black
PRICE
$45.00 (S-2XL)
SPEEDWERX PERFORMANCE MESH-BACK CAP
PART #
DESCRIPTION
MBHATSM
Mesh Back, Red/White/Blue
GMBHATSM
Mesh Back, Green
THESE CAPS ARE ADJUSTABLE!
BANNERS / DECALS
46
SPEEDWERX BANNER
PART #
DESCRIPTION
SPXBANNER
94” Long x 34” Tall With Grommets
PRICE
$50.00
SPEEDWERX DECALS
SPXD-S
6” Stick Anywhere Decal
SPXD-L
13” Windsheild Decal
SPXD-T
36” Trailer Decal
SPXHTD
High Temp Decal (-40 to 350 Degrees)
$1.00
$3.00
$15.00
$9.95
Speedwerx, Inc.
|
651.982.6020 or 651.982.0600
|
CAN KOOZIE
PART #
SPXKOOZIE
www.speedwerx.com
DESCRIPTION
Speedwerx Can Koozie
PRICE
$3.00
PRICE
$24.00
$24.00
47
ORDERING POLICY / ORDER FORM
ORDERS -- Our average shipping time is less than 3 working hours. All items can be checked for availability at the time you place your order. Your order is printed in our
shipping department (If Not On Back Order) immediately after you hang up the phone. Therefore “add-on” items called in later must be placed on a separate invoice and
are subject to additional shipping charges and the below small order fee if under $30.00.
DROP SHIPMENTS -- In an emergency, we can drop ship an order to your customer for a fee of $10.00 plus applicable freight charges.
PRICES -- A separate Master Price List is provided showing Dealer & Distributor cost, as well as the suggested retail prices. All prices are subject to change without notice.
BACKORDERS -- Backorders are shipped on arrival. We will verify any backorder over 30 days old before shipping. SPECIAL ORDERS CANNOT BE CANCELLED OR RETURNED.
RETURNS -- Return authorization is required. Call us for an RA number, clearly mark the outside of the package with the RA number, include a copy of the invoice and
write down the reason for return and return the package freight prepaid. Credit cannot be issued for items purchased 30 days or more prior to return, discontinued items,
special order or electrical parts. Returned merchandise must be in original package and in like new condition. A restocking fee will be charged on all returns except items
that are determined to be defective or not as ordered.
WARRANTIES AND GUARANTEES -- Items under question of warranty may be replaced or IN SOME CASES returned for house credit. If the problem is fixable it will be
fixed and returned to you. Cash refunds are not allowed. We require you to call in for a return authorization for your warranty work. Please include a detailed note explaining length of time used, cause of failure and any other necessary information.
SHORTAGES OR DAMAGED MERCHANDISE -- Must be reported at the time the package is opened - NO EXCEPTIONS. All orders are checked for accuracy after picking
and are weighed to give us three ways of checking. ALL BOXES AND PACKING MUST BE SAVED and returned to Hot Seat Performance, Inc. or Speedwerx, Inc. in most
cases to receive credit for shortages. We will pay for postage.
REFUSED C.O.D. -- Our FULL restocking fee, plus freight both ways will be charged to your account if you change your mind and refuse a C.O.D.
FREIGHT CLAIMS -- UPS SHIPMENTS: Indicate “DAMAGED” when signing. CARTON AND MERCHANDISE MUST BE KEPT. Contact us by phone for instructions.
DEALERS ONLY -- We require that you have a business name and be listed in the phone book doing business as (1) a franchised snowmobile or ATV dealer,
(2) a retail
store advertising and having an inventory of snowmobile and ATV accessories or (3) full-time recreational vehicle repair shop. A repair shop must have a retail display of
snowmobile or ATV accessories in order to buy anything other than repair parts. To apply for dealership submit request on your business letterhead and enclose a copy of
your business license. You must have a business phone number (NOT your residence). We prefer to have a photo of your business showing your business sign. If dealership is a new business, we will require a photo for our files. We reserve the right to refuse selling to anyone we feel does not meet our dealer qualifications. If you are not a
legitimate dealer, PLEASE DO NOT WASTE YOUR TIME AND OURS. We reserve the right to requalify dealer status at any time.
CREDIT TERMS -- All customers will receive orders on a C.O.D. or Credit Card basis except those who have established an open account with us and they will receive
orders under our regular terms. All invoices are due payable 30 days following the date of purchase. All past due accounts will be charged the maximum legal rate of
interest. Open accounts lapsing into 60 day balance will revert back to C.O.D. status. We send out statements monthly, however you may request a statement whenever
necessary. All merchandise purchased from Hot Seat Performance, Inc. or Speedwerx, Inc. remains our property until the account is paid in full. Checks returned unpaid
for any reason are subject to a $20.00 charge.
NEW ACCOUNTS -- Orders are normally shipped pre-paid on a credit card that you provide. Open account status may be established by well-rated firms. To establish an
open account, request a credit application when ordering. Please allow 30 days for processing the credit application! We reserve the right to reject any application.
MINIMUM ORDERS - Service Charges -- We have no minimum order. However, all orders totaling less than $30.00 dealer cost are automatically charged a $5.00 small
order fee to cover telephone and processing costs.
48
IMPORTANT READ BEFORE ORDERING! WARNING: THE HIGH-PERFORMANCE PRODUCTS LISTED IN THIS CATALOG ARE NOT FOR INSTALLATION OR OPERATION
BY “CONSUMERS”, AS DEFINED BY MAGNUSON-MOSS WARRANTY ACT!
DO NOT order any performance parts or services unless you have the technical ability to properly set-up the entire machine to compensate for the installation of those
parts. References in many of our literature to “bolt-on” parts, only indicates the parts are removable from the engine (as opposed to porting or machining type modifications). It is not meant to imply that the parts can be installed without additional modification. The necessary work and expertise needed to install different products varies.
Instructions, where provided, are given to assist in installation only; they are NOT a substitute for mechanical experience in setting up racing snowmobiles, watercraft or land
based vehicles. References to performance gains, reliability, ease of installment, etc. are based on our, and outside customer’s experiences. This is NOT a guarantee of similar
performance in every installation. While we sell proven hardware, in the end it’s up to the individual racer to make the most of that hardware in his/her application.
COMPANY
NAMEPHONE
ADDRESS (NO P.O. BOXES)
CITY / STATE / ZIP
SHIPPING PREFERENCE: (CIRCLE ONE)
UPS GROUND
UPS NEXT DAY AIR
UPS SECOND DAY AIR
UPS THREE DAY SELECT
PAYMENT METHOD: (CIRCLE ONE)
VISA
MASTERCARD
DISCOVER
MONEY ORDER
CREDIT CARD INFORMATION: (CARD NUMBER)
EXPIRATION DATE:
VERIFY BILLING ADDRESS: (WHERE DOES YOUR CREDIT CARD STATEMENT GET MAILED TO?)
MODEL AND YEAR OF MACHINE:
QTY
PART #
DESCRIPTION
PRICE EACH
ORDERS CAN BE FAXED 24 HOURS A DAY
651.982.0630
TOTAL PRICE
SUBTOTAL
TAX (6.875 %)
MN ONLY
MAIL TO:
SPEEDWERX, INC
20195 GREYSTONE AVE. FOREST LAKE, MN 55025
SHIPPING
GRAND TOTAL
Shop online 24/7
|
Join our e-mail list online to recieve our newsletter!
49
headquarters
speedwerx, inc.
20195 GREYSTONE AVENUE N.
FOREST LAKE, MN 55025 - USA
PHONE: (651) 982-6020
FAX: (651) 982-0630
WW.SPEEDWERX.COM
worldwide distributors
ECHO CYCLE
D&L PERFORMANCE
15311 118TH AVENUE
EDMONTON, ALBERTA T5V-1C3
TOLL FREE: 877-438-3246
LOC AL: 780-447-3246
FAX: 780-455-5815
SPEEDWER X@ECHOC YCLE.COM
WWW.ECHOC YCLE.COM
673 ROSSITER
ST-JEAN-SUR-RICHELIE, QUEBEC
J3B-8A4
PHONE: 450-359-7858
FAX: 450-359-9257
MCOSSET TE@DLPERFORM.COM
WWW.DLPERFORM.COM
COUNTRY CORNERS
DISPONENT VAGEN 11C
975 94, LULEA SWEDEN
PHONE: +46702105306
WWW.MNPROD.SE
AUTHORIZED DISTRIBUTOR FOR:
586 MAIN STREET
EXETER, ONTARIO N0M-1S1
PHONE: 519-235-3456
FAX: 519-235-0770
PARTS@COUNTRYCORNERS.NET
WWW.COUNTRYCORNERS.NET
SWEDISH MOUNTAIN PRODUCTS
WESTERN POWER SPORTS
601 EAST GOWEN ROAD
BOISE, IDAHO 83716
PHONE: 208-376-8400
DEALER PHONE: 800-999-3388
INFO@WPS-INC.COM
WWW.WPS-INC.COM

2016 Catalog

Transcription

Similar documents

Johnny Tremain by Esther Forbes Objectives

Rekluse was founded in 2002 on the values of performance, quality

Publication

Activity Kit - Draw Flynn`s Nose The Magistrate just can`t get Flynn`s

Hanging file system kits. File Frame.

Saebo Evaluation and Treatment Kit

Gravlax Kit Guide and Information

LGOBO SALE SHEET

Hinson Clutch Components names Chris Green the newest member

Hinson Clutch Components Now Available for 2014 Husqvarna