HDE-CSV-QAM - Blonder Tongue

HDE-CSV-QAM
Input: 1xComponent/HD-SDI/HDMI/VGA/
Composite
Output: 1xQAM+IP+ASI
A BAhri
Rev: 130220-01
© 2013 Blonder Tongue Laboratories, Inc. All rights reserved. Specifications and features are subject to change without notice. Trademarks are the property of their respective owner.
Description
HDE-CSV-QAM (MPEG-2 HD Encoder – 1xComponent/Composite/HD-SDI/HDMI/VGA-to-1xQAM) accepts one
(1) high-definition (HD) program from any of the following inputs:
1xComponent,
1xHD-SDI,
1xHDMI (unencrypted),
1xVGA, and
1xComposite
MPEG-2 encoded outputs are available in the following formats simultaneously:
1xQAM,
1xIP (10/100Base-T Ethernet), and
1xASI
1 Prog.
MPEG-2 HD Encoding
Dolby Digital Audio Encoding
1 Prog.
[1] The encoder does not accept HDCP-encrypted HDMI input
Blonder Tongue Laboratories, Inc.
1.800.523.6049
www.blondertongue.com
Slide # 2
Front Panel
Encoder LED
Power
LED
IP Reset to
factory default
1 RU
output
output
Also used for monitoring/control
1x ASI
Blonder Tongue Laboratories, Inc.
1x IP
1.800.523.6049
www.blondertongue.com
Slide # 3
Rear Panel
1x QAM
1x VGA
1x Component[1]
input
40 dBmV
channels 2 to 158
1 program per QAM
Loop-through
applications
output
output
110-220
VAC
Closed Captioning
input
+12VDC
Clear HDMI
HDCP is not supported
input
input
1x HDMI[2]
1x HD-SDI[2]
input
1x VGA
input
1x Composite[3]
[1]
The encoder accepts both analog and digital audio inputs. If both inputs are present, the encoder will process the analog as the primary audio source.
[2]
The encoder accepts analog NTSC Closed Captioning (EIA-608, also known as Line 21) from a Composite source, digitizes and then inserts it in the
MPEG-2 Transport Stream of the HDMI encoded input. The encoder also supports EIA-708 if Closed Captioning is embedded in the HD-SDI input.
[3]
The Analog L/R audio connectors are shared with the component input.
Blonder Tongue Laboratories, Inc.
1.800.523.6049
www.blondertongue.com
Slide # 4
Features
Front Panel
Rear Panel
• Accepts one (1) program from any of the following inputs: 1xComponent/Composite, 1xHD-SDI, 1xHDMI
(unencrypted), and 1xVGA
• Simultaneously delivers the following outputs: 1xQAM, 1xIP, and 1xASI
• Provides +40 dBmV QAM RF output level
• Provides comprehensive GUI-based monitoring and control via standard Web browsers
• Compact design allows installation of up to 3 Encoder modules in 1RU
• Supports Real-time Dolby® Digital audio encoding
• Supports user-defined PSIP configuration
• Supports Closed Captioning EIA-608 and EIA-708
Blonder Tongue Laboratories, Inc.
1.800.523.6049
Rack-mount Chassis
Model: HDE-3MCH
Stock No. 6389
www.blondertongue.com
Slide # 5
Typical Application (1xHD-SDI)
1xQAM
Output set to
RF Channel 55
HD-SDI
(1080i)
Supports PSIP configuration
User can configure RF output channel 55 to
be displayed on virtual channel 45.3
Studio Camera
1 program
on Virtual channel 45.3
Blonder Tongue Laboratories, Inc.
1.800.523.6049
www.blondertongue.com
Slide # 6
Typical Application (1xComponent)
Typical Digital
Media Server
Component
(1080i)
1xQAM
Output set to
RF Channel 55
1 program
on Virtual channel 45.3
Blonder Tongue Laboratories, Inc.
1.800.523.6049
www.blondertongue.com
Slide # 7
Monitoring & Control - Main > Status
The read-only “Main > Status” screen displays information about (i) the construction of the Transport Stream
(TS) and (ii) the Output mode.
1 Indicates the information about the
output transport stream, i.e. the
program present in the transport
stream and the corresponding
content and bitrate.
1
2
2 Indicates the information about
the three (3) output formats i.e.
IP, QAM, and ASI.
For IP, displays the protocol (UDP
or RTP), IP Address (Uni- or Multicast), & port number.
For QAM, displays the QAM RF
Channel number the output is
assigned to.
Blonder Tongue Laboratories, Inc.
1.800.523.6049
www.blondertongue.com
Slide # 8
Monitoring & Control - Main > Video
The “Main > Video” screen allows the user to select the video parameters for the input program.
Possible Options: Composite, Component, HD-SDI,HDMI,
VGA
Valid Range: Not to exceed 38.8
Possible Options: Disabled, Minimum, Medium, Maximum
Possible Options: Frame, Field
Possible Options: YCbCr, RGB
Valid Range: 1 to 120
Blonder Tongue Laboratories, Inc.
1.800.523.6049
www.blondertongue.com
Slide # 9
Monitoring & Control - Main > Audio
The “Main > Audio” screen allows the user to select the audio parameters for the input program.
Blonder Tongue Laboratories, Inc.
1.800.523.6049
www.blondertongue.com
Slide # 10
Monitoring & Control - Main > TS Config
The “Main > TS Config” screen allows the user to create a Virtual channel table (VCT) for the output TS.
1 Allows user to edit the following information
about the output TS:
Transport Stream ID number
Transport Stream’s bitrate
Modulation Mode (QAM 256/64; 16/8VSB)
1
2 Displays the input program assigned to TS,
along with PID numbers, program number,
short name, and major-minor channel number
to create a VCT.
2
Blonder Tongue Laboratories, Inc.
1.800.523.6049
www.blondertongue.com
Slide # 11
Monitoring & Control - Main > IP
The “Main > IP” screen allows the user to assign the Destination IP address for the TS.
11
2
2
33
4
1
Allows user to assign a uni- or multi-cast IP address for the IP output.
2
Allows user to select the UDP or RTP mode for the IP output and assign destination and source port numbers.
3
Allows user to assign an upper bound on the time that an IP packet can exist in an IP network to prevent an
undeliverable packet from circulating on the network perpetually. The range is 1 to 255.
4
When enabled, adds null packets to ensure the TS is maintained at a constant bitrate.
Blonder Tongue Laboratories, Inc.
1.800.523.6049
www.blondertongue.com
Slide # 12
Monitoring & Control - Main > QAM
The “Main > QAM” screen allows the user to assign the RF QAM characteristics for the TS.
1
2
3
1 Allows user to select the RF QAM channel number/frequency.
2 Allows user to turn the channel on/off.
3 Allows user to select the output level, modulation mode (QAM 64, 256, …) , and type (Standard, HRC, IRC).
Blonder Tongue Laboratories, Inc.
1.800.523.6049
www.blondertongue.com
Slide # 13
Monitoring & Control - Main > Output
The “Main > Output” screen allows the user to assign the TS to any of the three output formats.
2
1
1 Indicates the construction of TS.
2 Allows the user to assign TS to a desired output format. Shown here for example:
TS will be delivered in IP (UDP://225.168.253.2:50000), QAM (Ch.2) and ASI (ASI BNC connector) formats.
Blonder Tongue Laboratories, Inc.
1.800.523.6049
www.blondertongue.com
Slide # 14
Ordering & Contact Information
Model
HDE-CSV-QAM
HDE-3MCH
Stock
6382A
6389
Description
MPEG-2 HD Encoder
1RU Rack Mount Chassis
Sales Representatives
USA - Western Territory Manager
Salim Chehade
schehade@blondertongue.com | 800-523-6049 ext 4376
USA - Eastern Territory Manager
Tom Lowden
tlowden@blondertongue.com
| 800-523-6049 ext 4375
Director - CATV Sales & Special Markets
Steve Cimino
scimino@blondertongue.com
| 858-505-1318 ; 858-531-2997 (mobile)
Vice President – Sales & Service Management
Jeff Smith
jsmith@blondertongue.com
| 512-238-6973 ; 732-491-5657 (mobile)
Customer Service btorder@blondertongue.com
| 800-523-6049 exts 4220 & 4320
Outside the USA
Blonder Tongue Laboratories, Inc.
btglobalsales@blondertongue.com
1.800.523.6049
www.blondertongue.com
Slide # 15