DJ-195

DJ-195
Service Manual
CONTENTS
SPECIFICATIONS
1) GENERAL ................................................................ 2
2) TRANSMITTER ........................................................ 2
3) RECEIVER ............................................................... 2
CIRCUIT DESCRIPTION
1) Receiver System .................................................. 3, 4
2) Transmitter System ................................................... 4
3) PLL Synthesizer Circuit ........................................ 4, 5
EXPLODED VIEW
1) Front View ............................................................... 15
2) Rear View ............................................................... 16
PARTS LIST
MAIN Unit ......................................................... 17~19
Mechanical Parts .................................................... 20
Packing Parts ......................................................... 20
ADJUSTMENT
4) CPU and Peripheral Circuits ................................. 5, 6
1) Required Test Equipment .................................. 21, 22
5) M3826M8L***GP (XA0644) ................................. 6~8
2) Adjustment Mode ............................................. 23~26
SEMICONDUCTOR DATA
1) NMJ2070M T1 (XA210) ............................................ 9
2) AT24C16N-10SI-2.7TER (XA0368) .......................... 9
3) M5222FP-600C (XA0385) ...................................... 10
4)
5)
6)
7)
TK14521MTL (XA0515) .......................................... 11
M64082AGP (XA0543) ........................................... 12
NJM2904V-TE1 (XA0573) ...................................... 12
NJM2902V-TE1 (XA0596) ...................................... 12
8)
9)
10)
11)
S-81250SG-QD-T1 (XA0619) ................................. 13
S-80845ALMP-EA9-T2 (XA0620) ........................... 13
Transistor, Diode, and LED Ontline Drawings ......... 14
LCD Connection (EL0044) .................................... 14
PC BOARD VIEW
MAIN Unit ............................................................... 27
SCHEMATIC DIAGRAM ............................................ 28
BLOCK DIAGRAM ..................................................... 29
ALINCO,INC.
SPECIFICATIONS
1) GENERAL
Frequency coverage
Mode
Channel steps
Memory channels
Antenna connector
Frequency stability
Microphone input impedance
Power supply requirement
Current drain (at 13.8 V DC)
Usable temperature range
Dimensions
(Projections not included)
Weight
DTMF
Sub audible Tone(CTCSS)
Sub audible Tone (DCS)
T
: TX 144 ~ 147.995MHz
E
: TX 144 ~ 145.995MHz
EAH : TX 135 ~ 173.995MHz
TFH : TX 150 ~ 173.995MHz
TLH : TX 150 ~ 173.995MHz
F3E (FM)
5,10,12.5,15,20,25, & 30kHz
40 channels+1 CALL channel
RX 135 ~ 173.995MHz
RX 144 ~ 145.995MHz
RX 135 ~ 135.995MHz
RX 135 ~ 173.995MHz
RX 135 ~ 173.995MHz
BNC (50Ω unbalanced)
±5 ppm
2kΩ nominal
6.0 ~ 16.0V DC (negative ground)
1.2A (typical) Transmit high at 5W
200mA (typical) Receive at 280mW
50mA (typical) standby
20mA (typical) Battery save on
-10 ~ +60°C (14 ~ 140°F)
56 (W) × 124 (H) × 40 (D) mm (with EBP-48N)
2.2"(W) × 4.88"(H) × 1.57"(D) inches (with EBP-48N)
Approx. 375g (13.2oz) (with EBP-48N)
16 Buttons Keypad
encoder/decoder installed (39tones)
encoder/decoder installed (104codes)
2) TRANSMITTER
Output power
Approx. 5W EBP-48N installed
Approx. 5W 13.8V DC
Approx. 0.8W (LOW)
Modulation system
Variable reactance frequency modulation
Spurious emissions
Less than -60dB
Max. frequency deviation
±5kHz
3) RECEIVER
Receive system
Intermediate frequencies
Sensitivity(12dB SINAD)
Selectivity
Audio output power
2
Double conversion superheterodyne
1st 21.7MHz / 2nd 450kHz
Less than -14.0µdB (0.2uV) [144 ~ 147.995MHz]
Less than -12.0µdB (0.25uV) [135 ~ 173.995MHz]
-6dB : 12kHz or more
-60dB : 26kHz or less
280mW (typical with an 8Ω load)
200mW (8Ω 10% THD)
CIRCUIT DESCRIPTION
1) Receiver System
The receiver system is a double superheterodyne system with a 21.7MHz first IF and a 450kHz second IF.
1. Front End
The received signal at any frequency in the 130.00- to 173.995-MHz range is
passed through thelow-pass filter (L2, L3, L11, C13, C14, C15 and C60) and
tuning circuit (L16 and D15), and amplified by the RF amplifier (Q11). The
signal from Q11 is then passed through the tuning circuit (L17, L18, L19 and
varicaps D13, D14 and D16) and converted into 21.7MHz by the mixer (Q9).
The tuning circuit, which consists of L16, L17, varicaps D15 and D13, L18,
L19, varicaps D14 and D16, is controlled by the tracking voltage form the CPU
so that it is optimized for the reception frequency. The local signal from the VCO
is passed through the buffer (Q13), and supplied to the source of the mixer
(Q9). The radio uses the lower side of the superheterodyne system.
2. IF Circuit
The mixer mixes the received signal with the local signal to obtain the sum of
and difference between them. The crystal filter (XF1, XF2) selects 21.7MHz
frequency from the results and eliminates the signals of the unwanted frequencies. The first IF amplifier (Q10) then amplifies the signal of the selected frequency.
3. Demodulator Circuit
After the signal is amplified by the first IF amplifier (Q10), it is input to pin 16 of
the demodulator IC (IC5). The second local signal of 21.25MHz (shared with
PLL IC reference oscillation), which is oscillated by the internal oscillation circuit in IC1 and crystal (X1), is input through pin 1 of IC5. Then, these two
signals are mixed by the internal mixer in IC5 and the result is converted into
the second IF signal with a frequency of 450kHz. The second IF signal is output
from pin 3 of IC5 to the ceramic filter (FL1), where the unwanted frequency
band of that signal is eliminated, and the resulting signal is sent back to the IC5
through pins 5.
The second IF signal input via pin 5 is demodulated by the internal limiter
amplifier and quadrature detection circuit in IC5, and output as an audio signal
through pin 10.
4. Audio Circuit
The audio signal from pin 10 of IC5 is compensated to the audio frequency
characteristics in the de-emphasis circuit (R104, R103, C122, C121) and amplified by the AF amplifier (Q26). The signal is then input to pin 2 of the electronic volume (IC4) for volume adjustment, and output from pin 1. The adjusted
signal is sent to the audio power amplifier (IC3) through pin 2 to drive the
speaker.
3
5. Squelch Circuit
The signal except for the noise component in AF signal of IC5 is cut by the
active filter inside IC. The noise component is amplified and rectified, then converted to the DC voltage to output from pin13 of IC5. The voltage is led to pin 2
of CPU and compared with the setting voltage. The squelch will open if the
input voltage is lower than the setting voltage.
2) Transmitter System
1. Modulator Circuit
The audio signal is converted to an electric signal in either the internal or external microphone, and input to the microphone amplifier (IC7). IC7 consists of
two operational amplifiers; one amplifier (pins 5, 6, and 7) is composed of preemphasis and IDC circuits and the other (pins 1, 2, and 3) is composed of a
splatter filter. The maximum frequency deviation is obtained by VR202 and
input to the cathode of the varicap of the VCO, to change the electric capacity
in the oscillation circuit. This produces the frequency modulation.
2. Power Amplifier Circuit
The transmitted signal is oscillated by the VCO, amplified by the pre-drive
amplifier (Q4) and drive amplifier (Q3), and input to the final amplifier (Q2). The
signal is then amplified by the final amplifier (Q2) and led to the antenna switch
(D1) and low-pass filter (L5, L4, L3, L2, C16, C15, C14 and C13), where unwanted high harmonic waves are reduced as needed, and the resulting signal
is supplied to the antenna.
3. APC Circuit
Part of the transmission power from the low-pass filter is detected by D6, converted to DC, and then amplified by a differential amplifier. The output voltage
controls the bias voltage from the source of Q2 and Q3 to maintain the transmission power constant.
3) PLL Synthesizer Circuit
1. PLL
The dividing ratio is obtained by sending data from the CPU (IC9) to pin 2 and
sending clock pulses to pin 3 of the PLL IC (IC1). The oscillated signal from the
VCO is amplified by the buffer (Q5) and input to pin 6 of IC1. Each programmable divider in IC1 divides the frequency of the input signal by N according to
the frequency data, to generate a comparison frequency of 5 or 6.25kHz.
2. Reference Frequency Circuit
The reference frequency appropriate for the channel steps is obtained by dividing the 21.25MHz reference oscillation (X1) by 4250 or 3400, according to the
data from the CPU (IC9). When the resulting frequency is 5kHz, channel steps
of 5, 10, 15, 20, 25, 30, and 50kHz are used. When it is 6.25kHz, the 12.5kHz
channel step is used.
4
3. Phase Comparator Circuit
The PLL (IC1) uses the reference frequency, 5 or 6.25kHz. The phase comparator in the IC1 compares the phase of the frequency from the VCO with that
of the comparison frequency, 5 or 6.25kHz, which is obtained by the internal
divider in IC1.
4. PLL Loop Filter Circuit
If a phase difference is found in the phase comparison between the reference
frequency and VCO output frequency, the charge pump output (pin 8) of IC1
generates a pulse signal, which is converted to DC voltage by the PLL loop
filter and input to the varicap of the VCO unit for oscillation frequency control.
5. VCO Circuit
A Colpitts oscillation circuit driven by Q1 directly oscillates the desired frequency. The frequency control voltage determined in the CPU (IC9) and PLL
circuit is input to the varicaps (D32 and D34). This change the oscillation frequency, which is amplified by the VCO buffer (Q5) and output from the VCO
unit.
4) CPU and Peripheral Circuits
1. LCD Display Circuit
The CPU turns ON the LCD via segment and common terminals with 1/4 the
duty and 1/3 the bias, at the frame frequency is 112.5Hz.
2. Display Lamp Circuit
When the LAMP key is pressed, “H” is output form pin 50 of CPU (IC9) to the
bases of Q12. Q12 then turn ON and the LEDs (D12 and D17) light.
3. Reset and Backup
When the power form the DC jack or external battery increases from Circuits 0
V to 2.5 or more, “H” level reset signal is output form the reset IC (IC11) to pin
33 of the CPU (IC9), causing the CPU to reset. The reset signal, however,
waits at 100, and does not enter the CPU untilthe CPU clock (X2) has stabilized.
4. S(Signal) Meter Circuit
The DC potential of pin 8 of IC5 is input to pin 1 of the CPU (IC9), converted
from an analog to a digital signal, and displayed as the S-meter signal on the
LCD.
5. DTMF Encoder
The CPU (IC9) is equipped with an internal DTMF encoder. The DTMF signal
is output from pin 10, through R102 and R158 (for level adjust-ment), and then
through the microphone amplifier (IC7), and is sent to the varicap of the VCO
for modulation. At the same time, the monitor-ing tone passes through the AF
circuit and is output form the speaker.6. CTCSS Encoder The CPU (IC9) is
equipped with an internal tone encoder. The tone signal (67.0 to 250.3 Hz) is
output form pin 9 of the CPU to the varicap (D3) of the VCO for modulation.
5
6. Tone Encoder
The CPU (IC9) is equipped with an internal tone encoder.The tone signal (67.0
to 250.3Hz) is output from pin 9 of the CPU to the varicap (D3) of the VCO for
modulation.
7. DCS Encoder
The CPU (IC9) is equipped with an internal DCS code encoder. The code (023
to 754) is output from pin 9 of the CPU to the varicap (D3) of the PLL reference
oscillator. When DCS is ON, DCS MUTE circuit (Q15-ON, Q18-ON, Q16-OFF)
works. The modulation activates in X1 side only.
8. CTCSS, DCS Decoder
The voice band of the AF output signal from pin 10 of IC5 is cut by sharp active
filter IC8 (VCVS) and amplified, then led to pin 4 of CPU. The input signal is
compared with the programmed tone frequency code in the CPU. The squelch
will open when they match.
9. Clock Shift
In the unlikely event that CPU clock noise is present on a particular operating
frequency programmed into the radio, you can shift the CPU clock frequency to
avoid the CPU clock-noise. The output signal from pin 31 of the CPU turns on
Q30. Then the oscillation frequency of X2 will be shifted about 300 ppm.
5) M3826M8L
CPU
***GP (XA0644)
Terminal Connection
(TOP VIEW)
6
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
Pin Name
P67/AN7
P66/AN6
P65/AN5
P64/AN4
P63/SCLK22/AN3
P62/SCLK21/AN2
P61/SOUT2/AN1
P60/SIN2/AN0
P57/ADT/DA2
P56/DA1
P55/CNTR1
P54/CNTR0
P53/RTP1
P52/RTP0
P51/PWM3
P50/PWM0
P47/SROY1
P46/SCLK1
P45/TXD
P44/RXD
P43/ /TOUT
P42I/NT2
P41/INT1
P40
P77
P76
P75
P74
P73
P72
P71
P70/INTO
RESET
Xcin
Xcout
Xin
Xout
Vss
P27
P26
P25
P24
P23
P22
P21
P20
P17
P16
P15/SEG39
P14/SEG38
P13/SEG37
P12/SEG36
P11/SEG35
P10/SEG34
P07/SEG33
Function
SMT
SQL
BAT
TIN
BP1
BP2
DCSW
F/M/KEY
CTOUT
DTOUT
SCL
TBST
BP4
MUTE
CLK
DATA
STBT
STBP
UTX
RTX
BEEP
RE2
RE1
SD
PTT
SDT
P5C
T5C
R5C
AFP
CLSFT
BU
RESET
Xcin
Xcout
Xin
Xout
GND
PSW
SDA
C5C
LAMP
KI0
KI1
KI2
KI3
KO3
KO2
KO1
KO0
H/L
DA2
DA1
DA0
SCR
I/O
I
I
I
I
I
I
O
I
O
O
O
I/O
I
I/O
O
I/O
I/O
O
O
I
I/O
I
I
O
I
I
O
O
O
O
O
I
I
I
O
O
O
I
I
I
I
O
O
O
O
O
O
O
O
I
PU
-
Logic
A/D
A/D
A/D
A/D
A/D
A/D
Activ high
A/D
D/A
D/A
Pulse
Pulse/Activ low
Activ high
Pulse
Pulse
- Activ low/Pulse
Pulse
Pulse
Pulse
- Pulse/Activ low
Avtiv low
Avtiv low
Avtiv low
Activ high
Activ high
Activ low
Activ low
Activ low
Activ low
Activ high
Activ low
Activ low
Avtiv low
Pulse
Activ high
Activ high
Avtiv low
Avtiv low
Avtiv low
Avtiv low
Avtiv low
Avtiv low
Avtiv low
Avtiv low
-
Description
S-meter input
Noise level input for squelch
Low battery detection input
CTCSS tone input/DSC code input
Band plan 1
Band plan 2
DCS signal mute
Function/Moniter key input
CTCSS tone output/DCS tone output/Tuning voltage out
DTMF output/EVR control output
Serial clock for EEPROM
Tone burst output/UP input while trunking
Band plan 4
Microphone mute/Bank change input while trunking
Serial clock output for PLL,CTCSS,and trunking board
Serial data output for PLL,CTCSS, and trunking board/PLL unlock signal input
Trunking board detedtion(when PSW is on)/Storobe signal to trunking board
Strobe for PLL IC
UART data transmission output
UART data reception output
Beep tone/Band plan 3(when PSW is on)
Rotary encoder input
Signal detection output
PTT input
Trunking signal detection input
PLL power ON/OFF output
TX power ON/OFF output
RX power ON/OFF output
AF AMP power ON/OFF output
CLOCK frequency shift
Backup signal detection input
Reset input
Main clock input
Main clock output
CPU GND
Power switch input
Serial data for EEPROM
C5V power ON/OFF output
Lamp ON/OFF
Key matrix input
Key matrix output
Tx power H/L
DA converter for output power
DA converter for output power
DA converter for output power
SCR input
7
No.
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
8
Pin Name
P06/SEG32
P05/SEG31
P04/SEG30
P03/SEG29
P02/SEG28
P01/SEG27
P00/SEG26
P37/SEG25
P36/SEG24
P35/SEG23
P34/SEG22
P33/SEG21
P32/SEG20
P31/SEG19
P30/SEG18
SEG17
SEG16
SEG15
SEG14
SEG13
SEG12
SEG11
SEG10
SEG9
SEG8
SEG7
SEG6
SEG5
SEG4
SEG3
SEG2
SEG1
SEG0
Vcc
Vref
Avss
COM3
COM2
COM1
COM0
VL3
VL2
C2
C1
VL1
Function
AFC
S31
S30
S29
S28
S27
S26
S25
S24
S23
S22
S21
S20
S19
S18
S17
S16
S15
S14
S13
S12
S11
S10
S9
S8
S7
S6
S5
S4
S3
S2
S1
S0
VDD
Vref
Avss
COM3
COM2
COM1
COM0
VL3
VL2
I
C1
VL1
I/O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
I
PU
-
Logic
Activ high
A/D
Description
AF tone control
LCD segment signal
CPU power terminal
AD converter power supply
AD converter GND
LCD COM3 output
LCD COM2 output
LCD COM1 output
LCD COM0 output
LCD power supply
LCD power supply
SEMICONDUCTOR DATA
1) NMJ2070M T1 (XA210)
Low Voltage Power Amplifier
Equivalent Circuit
2) AT24C16N-10SI-2.7TER (XA0368)
16K bits CMOS Serial EEPROM
9
3) M5222FP-600C (XA0385)
Electronic Volume
10
4) TK14521MTL (XA0515)
IF System
11
5) M64082AGP (XA0543)
6) NJM2904V-TE1 (XA0573)
Dual Single Supply Operational Amplifier
7) NJM2902V-TE1 (XA0596)
Quad Single Supply Operational Amplifier
12
8) S-81250SG-QD-T1 (XA0619)
Top View
9) S-80845ALMP-EA9-T2 (XA0620)
Voltage Regulator
13
10) Transistor, Diode, and LED Ontline Drawings
Top View
RSL135 TE11
XD0066
DA204U T106
XD0130
1SV214 TPH4
XD0131
MA741WA TX
XD0251
MA741WK
XD0252
S3DG7
XD0261
MA729-TX
XD0291
U2FWJ44N (TE12R)
XD0294
MA2S30400L
XD0312
MA2S111-TX
XD0323
HSU277TRF
XD331
RB706F-40-T106
XD0332
MRF9745T1
XE0034
2SK2975-T11-A
XE0038
2SK882-GR-TE85L
XE0040
BRPG1201W TR
XL0028
SML-310MTT86
XL0036
2SC4081 T106R
XT0095
2SA1036K T146Q
XT110
2SD2216R-TX
XT0135
2SB766A-TX
XT0170
2SC4808-TX. AR
XT0171
2SC4618
XT0172
2SC2915
XT0178
UN9216-R-TX
XU0099
RN2107 TE85L
XU0192
RN1107 TE85L
XU0193
RN2111 TE85L
XU0194
XP1114 (TX)
XU0161
XP1501-TX
XU0172
RN1104 TE85L
XU0195
SEG0
SEG1
SEG2
SEG3
SEG4
SEG5
SEG6
SEG7
SEG8
SEG9
SEG10
SEG11
SEG12
SEG13
SEG14
SEG15
SEG16
SEG17
SEG18
SEG19
SEG20
SEG21
SEG22
SEG23
SEG24
SEG25
SEG26
SEG27
SEG28
SEG29
SEG30
SEG31
11) LCD Connection (EL0044)
14
EXPLODED VIEW
1) Front View
15
2) Rear View
16
PARTS LIST
Ref.
No.
Parts No. Description
Parts Name
Ver
Main Unit
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10
C11
C12
C13
C14
C15
C16
C17
C18
C19
C20
C21
C22
C23
C24
C25
C26
C27
C28
C29
C30
C31
C32
C33
C34
C35
C36
C37
C38
C39
C40
C41
C42
C43
C44
C45
C46
C47
C48
C49
C50
C51
C52
C53
C54
C55
C56
C57
C58
C59
C61
C62
C63
C64
C65
C66
C67
C68
C69
C70
C71
C72
C73
C73
C74
C75
C76
C77
C78
CU3035
CU3035
CS0404
CU3012
CU3012
CU3035
CU3035
CU3035
CU3035
CU3035
CU3019
CU3015
CU3011
CU3014
CU3016
CU3085
CU3004
CU3001
CU3020
CU3016
CU3003
CU3035
CU3004
CU3002
CU3012
CU3015
CU3002
CU3002
CU3035
CU0108
CU3047
CU3035
CU3047
CU3035
CU3035
CU0108
CU3035
CU3027
CU3035
CU3002
CU3002
NC
CU3035
CU3035
CU3035
CU0108
CU3035
CU3035
CU3047
CU3035
CU3047
CS0404
CU3014
CU3047
CU3035
CU3002
CU3002
CU3015
CU3007
CU3047
CU3111
CS0407
CU3011
CU3011
CU3035
CU3012
CU3047
CU3057
CU3016
CU3035
CS0406
CU3017
CU3085
CU3019
CU3018
CU3047
CU3003
CU3011
Chip C
Chip C
Chip Tantal
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
C1608JB1H102KT-AS
C1608JB1H102KT-AS
6MCM106MATER
C1608CH1H120JT-AS
C1608CH1H120JT-AS
C1608JB1H102KT-AS
C1608JB1H102KT-AS
C1608JB1H102KT-AS
C1608JB1H102KT-AS
C1608JB1H102KT-AS
C1608CH1H470JT-AS
C1608CH1H220JT-AS
C1608CH1H100DT-AS
C1608CH1H180JT-AS
C1608CH1H270JT-AS
C1608CH1H300JT-AS
C1608CH1H030CT-AS
C1608CH1H0R5CT-AS
C1608CH1H560JT-AS
C1608CH1H270JT-AS
C1608CH1H020CT-AS
C1608JB1H102KT-AS
C1608CH1H030CT-AS
C1608CH1H010CT-AS
C1608CH1H120JT-AS
C1608CH1H220JT-AS
C1608CH1H010CT-AS
C1608CH1H010CT-AS
C1608JB1H102KT-AS
LMK212BJ105KG
C1608JB1H103KT-N
C1608JB1H102KT-AS
C1608JB1H103KT-N
C1608JB1H102KT-AS
C1608JB1H102KT-AS
LMK212BJ105KG
C1608JB1H102KT-AS
C1608CH1H221JT-AS
C1608JB1H102KT-AS
C1608CH1H010CT-AS
C1608CH1H010CT-AS
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip Tantal
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip Tantal
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip Tantal
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
C1608JB1H102KT-AS
C1608JB1H102KT-AS
C1608JB1H102KT-AS
LMK212BJ105KG
C1608JB1H102KT-AS
C1608JB1H102KT-AS
C1608JB1H103KT-N
C1608JB1H102KT-AS
C1608JB1H103KT-N
6MCM106MATER
C1608CH1H180JT-AS
C1608JB1H103KT-N
C1608JB1H102KT-AS
C1608CH1H010CT-AS
C1608CH1H010CT-AS
C1608CH1H220JT-AS
C1608CH1H060CT-A
C1608JB1H103KT-N
C1608JB1C104KT-N
35MC104MATER
C1608CH1H100DT-AS
C1608CH1H100DT-AS
C1608JB1H102KT-AS
C1608CH1H120JT-AS
C1608JB1H103KT-N
C1608CH1H130JT-AS
C1608CH1H270JT-AS
C1608JB1H102KT-AS
35MCM105MATER
C1608CH1H330JT-AS
C1608CH1H300JT-AS
C1608CH1H470JT-AS
C1608CH1H390JT-AS
C1608JB1H103KT-N
C1608CH1H020CT-AS
C1608CH1H100JT-AS
T.E.EAH
TFH.TLH
Ref.
No.
C79
C80
C81
C82
C83
C84
C85
C86
C87
C88
C89
C90
C91
C92
C93
C94
C95
C96
C97
C98
C99
C100
C101
C102
C103
C104
C105
C106
C107
C108
C109
C110
C111
C112
C113
C114
C115
C116
C117
C118
C119
C120
C121
C122
C123
C124
C125
C126
C127
C128
C129
C130
C131
C132
C133
C134
C135
C136
C137
C138
C139
C140
C141
C142
C143
C144
C145
C146
C147
C148
C149
C150
C151
C152
C153
C154
C155
C156
C157
Parts No. Description
CU0108
CU3035
CU3016
CU3035
CU3111
CU3035
CU3016
CU3035
CE0392
CU3035
CS0405
CU3035
CU3035
CU0108
CU3047
CS0404
CU3035
CS0408
CU3035
CU0108
CS0408
CU3035
CU3035
CE0392
CE0373
CU0108
CU3047
CU3035
CS0404
CS0404
CU3047
CU3035
CU3111
CU3111
CU3035
CE0397
CU3047
CU3051
CU3051
CU0108
CU3111
CE0396
CU3051
CU3111
CU3111
CS0404
CU3035
CU3111
CU3025
CU3035
CU3111
CU3041
CU0108
CU3111
CU3047
CU3038
CU3053
CU3111
CU3035
CU3111
CU3035
CU3035
CU3035
CU0108
CU3051
CU3047
CU3021
CU3101
CU3111
CU3111
CS0404
CU3047
CU3047
CU0108
CU3047
CU0108
CS0405
CU3014
CU3013
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Electrolytic C
Chip C
Chip Tantal
Chip C
Chip C
Chip C
Chip C
Chip Tantal
Chip C
Chip Tantal
Chip C
Chip C
Chip Tantal
Chip C
Chip C
Electrolytic C
Electrolytic C
Chip C
Chip C
Chip C
Chip Tantal
Chip Tantal
Chip C
Chip C
Chip C
Chip C
Chip C
Electrolytic C
Chip C
Chip C
Chip C
Chip C
Chip C
Electrolytic C
Chip C
Chip C
Chip C
Chip Tantal
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip Tantal
Chip C
Chip C
Chip C
Chip C
Chip C
Chip Tantal
Chip C
Chip C
Parts Name
Ver
LMK212BJ105KG
C1608JB1H102KT-AS
C1608CH1H270JT-AS
C1608JB1H102KT-AS
C1608JB1C104KT-N
C1608JB1H102KT-AS
C1608CH1H270JT-AS
C1608JB1H102KT-AS
6MV47UW
C1608JB1H102KT-AS
10MCS475MATER
C1608JB1H102KT-AS
C1608JB1H102KT-AS
LMK212BJ105KG
C1608JB1H103KT-N
6MCM106MATER
C1608JB1H102KT-AS
6MCM156MATER
C1608JB1H102KT-AS
LMK212BJ105KG
6MCM156MATER
C1608JB1H102KT-AS
C1608JB1H102KT-AS
6MV47UW
16MV 100UW
LMK212BJ105KG
C1608JB1H103KT-N
C1608JB1H102KT-AS
6MCM106MATER
6MCM106MATER
C1608JB1H103KT-N
C1608JB1H102KT-AS
C1608JB1C104KT-N
C1608JB1C104KT-N
C1608JB1H102KT-AS
MVS16VC47MF46
C1608JB1H103KT-N
C1608JB1E223KT-NS
C1608JB1E223KT-NS
LMK212BJ105KG
C1608JB1C104KT-N
MVS6.3VC100MF46
C1608JB1E223KT-NS
C1608JB1C104KT-N
C1608JB1C104KT-N
6MCM106MATER
C1608JB1H102KT-AS
C1608JB1C104KT-N
C1608CH1H151JT-AS
C1608JB1H102KT-AS
C1608JB1C104KT-N
C1608JB1H332KT-NS
LMK212BJ105KG
C1608JB1C104KT-N
C1608JB1H103KT-N
C1608JB1H182KT-AS
C1608JF1E333ZT-N
C1608JB1C104KT-N
C1608JB1H102KT-AS
C1608JB1C104KT-N
C1608JB1H102KT-AS
C1608JB1H102KT-AS
C1608JB1H102KT-AS
LMK212BJ105KG
C1608JB1E223KT-NS
C1608JB1H103KT-N
C1608CH1H680JT-AS
C1608JB1C473KT-NS
C1608JB1C104KT-N
C1608JB1C104KT-N
6MCM106MATER
C1608JB1H103KT-N
C1608JB1H103KT-N
LMK212BJ105KG
C1608JB1H103KT-N
LMK212BJ105KG
10MCS475MATER
C1608CH1H180JT-AS
C1608CH1H150JT-AS
17
Ref.
No.
C158
C159
C160
C161
C162
C163
C164
C165
C166
C167
C168
C169
C170
C171
C172
C173
C174
C175
C176
C177
C178
C179
CN1
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
D12
D13
D14
D15
D16
D17
D18
D19
D20
D21
D22
D23
FL1
IC1
IC2
IC3
IC4
IC5
IC7
IC8
IC9
IC10
IC11
JK2
JK3
JK4
L1
L2
L3
L4
L5
L6
L7
L8
L9
L10
L11
L12
L13
L15
L16
L17
L18
L19
L20
L21
LCD1
MIC1
PCB
Q1
18
Parts No. Description
CU0108
CU3035
CU3047
CS0404
CU3111
CU3111
CU3046
CU3111
CU3044
CU3040
CU3050
CU3035
CU3035
CU3035
CU3101
CU3035
CU3101
NC
NC
NC
NC
CU3049
UE0350
XD0066
XD0312
XD0131
XD0312
XD0331
XD0251
XD0323
XD0261
XD0130
XD0323
XD0294
XL0036
XD0312
XD0312
XD0312
XD0312
XL0036
XD0131
XL0028
XD0291
XD0332
XD0323
NC
XC0060
XA0543
XA0619
XA0210
XA0385
XA0515
XA0573
XA0596
XA0644
XA0368
XA0620
UJ0046
UJ0019
UJ0022
QC0508
QKA45A
QKA45A
QKA65A
QKA45A
QC0571
QC0566
QC0570
QC0573
QKA75A
QC0535
QC0538
QC0570
QC0508
QC0537
QC0537
QC0537
QC0537
QC0573
QC0089
EL0044
EY0017
UP0376
XT0171
Parts Name
Chip C
Chip C
Chip C
Chip Tantal
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
Chip C
LMK212BJ105KG
C1608JB1H102KT-AS
C1608JB1H103KT-N
6MCM106MATER
C1608JB1C104KT-N
C1608JB1C104KT-N
C1608JB1H822KT-NS
C1608JB1C104KT-N
C1608JB1H562KT-NS
C1608JB1H272KT-NS
C1608JB1E183KT-A
C1608JB1H102KT-AS
C1608JB1H102KT-AS
C1608JB1H102KT-AS
C1608JB1C473KT-NS
C1608JB1H102KT-AS
C1608JB1C473KT-NS
Chip C
Connector
Diode
Diode
Diode
Diode
Diode
Diode
Diode
Diode
Diode
Diode
Diode
Chip LED
Diode
Diode
Diode
Diode
Chip LED
Diode
Chip LED
Diode
Diode
Diode
C1608JB1E153KT-NS
DF12D(3.5)20DP0.5V81
RLS135 TE 11
MA2S30400L
1SV214 TPH4
MA2S30400L
HSU277TRF
MA741WA TX
MA2S111-TX
S3DG7
DA204U T106
MA2S111-TX
U2FWJ44N(TE12R)
SML-310MTT86
MA2S30400L
MA2S30400L
MA2S30400L
MA2S30400L
SML-310MTT86
1SV214 TPH4
BRPG1201W TR
MA729-TX
RB706F-40-T106
MA2S111-TX
Filter
IC
IC
IC
IC
IC
IC
IC
CPU
IC
IC
Jack
Jack
Jack
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
Coil
LCD
Microphone
PCB
Transistor
ALFYM450F=K
M64082AGP
S-81250SG-QD-T1
NJM2070M T1
M5222FP-600C
TK14521MTL
NJM2904V-TE1
NJM2902V-TE1
M38267E8L-GP
AT24C16N-10SI-2.7TER
S-80845ALMP-EA9-T2
MJ82-1
HSJ1493-01-010
HSJ1102-01-540
LK16082R2K-T
MR1.5 4.5T 0.4
MR1.5 4.5T 0.4
MR1.5 3.5T 0.4
MR1.5 4.5T 0.4
LL1608-FH68NJ
LL1608-FH27NJ
LL1608-FH56NJ
LL1608-FHR10J
QKA75A
LQN21A56NJ04
LQN21AR10J04
LL1608-FH56NJ
LK16082R2K-T
LQN21A82NJ04
LQN21A82NJ04
LQN21A82NJ04
LQN21A82NJ04
LL1608-FHR10J
NL322522T-181JA
HT-3404
OB-27P44
DJ195 INTEGRATED
2SC4808-TX.AR
Ver
Ref.
No.
Q2
Q3
Q4
Q5
Q6
Q7
Q8
Q9
Q10
Q11
Q12
Q13
Q14
Q15
Q16
Q17
Q18
Q19
Q20
Q21
Q22
Q23
Q24
Q25
Q26
Q27
Q28
Q29
Q30
Q31
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13
R14
R15
R16
R17
R18
R19
R20
R21
R22
R23
R24
R25
R26
R27
R28
R28
R29
R30
R31
R32
R33
R34
R35
R36
R37
R38
R39
R40
R41
R42
R43
R44
R45
R46
R47
R48
R49
R50
R51
R52
R53
Parts No. Description
XE0038
XE0034
XT0171
XT0171
XU0172
XT0135
XT0170
XE0040
XT0172
XE0040
XU0193
XT0178
XT0170
XU0193
XU0193
XT0170
XU0193
XT0110
XU0172
XU0172
XU0161
XU0192
XT0135
XU0193
XT0095
XU0192
XT0135
XU0195
XU0194
XU0192
RK3030
RK3030
RK3034
RK3050
RK3022
RK3042
RK3046
RK3022
RK3030
RK3062
RK3049
RK3062
RK3018
RK3046
RK3044
RK3062
RK3034
RK3026
RK3062
RK3042
RK3037
RK3050
RK3058
RK3058
RK3062
RK3053
RK3054
RK3052
RK3054
RK0002
RK3034
RK3042
RK3050
RK3030
RK3050
RK3046
RK3022
RK3050
RK3039
RK3066
RK3050
RK3018
RK3042
RK3038
RK3037
RK3044
RK3062
RK3030
RK3042
RK3037
RK3020
RK3062
RK3038
RK3076
FET
FET
Transistor
Transistor
Transistor
Transistor
Transistor
FET
Transistor
FET
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Transistor
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Parts Name
2SK2975-T11-A
MRF9745T1
2SC4808-TX.AR
2SC4808-TX.AR
XP1501-TX
2SD2216R-TX
2SB766A-TX
2SK882-GR-TE85L
2SC4618
2SK882-GR-TE85L
RN1107 TE85L
2SC4915-O TE85L
2SB766A-TX
RN1107 TE85L
RN1107 TE85L
2SB766A-TX
RN1107 TE85L
2SA1036K T146Q
XP1501-TX
XP1501-TX
XP1114(TX)
RN2107 TE85L
2SD2216R-TX
RN1107 TE85L
2SC4081 T106R
RN2107 TE85L
2SD2216R-TX
RN1104 TE85L
RN2111 TE85L
RN2107 TE85L
MCR03EZHJ221
MCR03EZHJ221
MCR03EZHJ471
MCR03EZHJ103
MCR03EZHJ470
MCR03EZHJ222
MCR03EZHJ472
MCR03EZHJ470
MCR03EZHJ221
MCR03EZHJ104
MCR03EZHJ822
MCR03EZHJ104
MCR03EZHJ220
MCR03EZHJ472
MCR03EZHJ332
MCR03EZHJ104
MCR03EZHJ471
MCR03EZHJ101
MCR03EZHJ104
MCR03EZHJ222
MCR03EZHJ821
MCR03EZHJ103
MCR03EZHJ473
MCR03EZHJ473
MCR03EZHJ104
MCR03EZHJ183
MCR03EZHJ223
MCR03EZHJ153
MCR03EZHJ223
ERJ6GEYJ120V
MCR03EZHJ471
MCR03EZHJ222
MCR03EZHJ103
MCR03EZHJ221
MCR03EZHJ103
MCR03EZHJ472
MCR03EZHJ470
MCR03EZHJ103
MCR03EZHJ122
MCR03EZHJ224
MCR03EZHJ103
MCR03EZHJ220
MCR03EZHJ222
MCR03EZHJ102
MCR03EZHJ821
MCR03EZHJ332
MCR03EZHJ104
MCR03EZHJ221
MCR03EZHJ222
MCR03EZHJ821
MCR03EZHJ330
MCR03EZHJ104
MCR03EZHJ102
MCR03EZHJ155
Ver
T.E.EAH
TFH.TLH
T.E.EAH
Ref.
No.
R54
R55
R56
R57
R58
R59
R60
R61
R62
R63
R64
R65
R66
R67
R68
R69
R70
R71
R71
R72
R73
R74
R75
R76
R77
R78
R79
R80
R81
R82
R83
R84
R85
R86
R87
R88
R89
R90
R91
R92
R93
R94
R95
R96
R97
R98
R99
R100
R101
R102
R103
R104
R105
R106
R107
R108
R109
R110
R111
R112
R113
R114
R115
R116
R117
R118
R119
R120
R121
R122
R123
R124
R125
R126
R127
R128
R129
R130
R131
R132
R133
R134
R135
R136
Parts No. Description
RK3074
RK3022
RK3042
RK3074
RK3022
RK3074
RK3074
RK3050
RK3030
RK3050
RK3059
RK3058
RK3058
RK3076
RK3059
RK3074
RK3054
RK3057
RK3058
RK3054
RK3050
RK3044
RK3058
RK3050
RK3058
RK3054
RK3050
RK3046
RK3062
RK3046
RK3050
RK3036
RK3022
RK3050
RK3038
RK3050
RK3032
RK3044
RK3062
RK3058
RK3032
RK3050
RK3050
RK3058
RK3052
RK3050
RK3041
RK3066
RK3050
RK3066
RK3052
RK3048
RK3054
RK3050
RK3050
RK3014
RK3062
RK3066
RK3038
RK3051
RK3032
RK3062
RK1018
RK3074
RK3062
RK3045
RK3057
RK3061
RK3055
RK3062
RK3058
RK3063
RK3072
RK3056
RK3054
RK3056
RK3058
RK3038
RK3022
RK3050
RK3014
RK3058
RK3074
RK3050
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Parts Name
MCR03EZHJ105
MCR03EZHJ470
MCR03EZHJ222
MCR03EZHJ105
MCR03EZHJ470
MCR03EZHJ105
MCR03EZHJ105
MCR03EZHJ103
MCR03EZHJ221
MCR03EZHJ103
MCR03EZHJ563
MCR03EZHJ473
MCR03EZHJ473
MCR03EZHJ155
MCR03EZHJ563
MCR03EZHJ105
MCR03EZHJ223
MCR03EZHJ393
MCR03EZHJ473
MCR03EZHJ223
MCR03EZHJ103
MCR03EZHJ332
MCR03EZHJ473
MCR03EZHJ103
MCR03EZHJ473
MCR03EZHJ223
MCR03EZHJ103
MCR03EZHJ472
MCR03EZHJ104
MCR03EZHJ472
MCR03EZHJ103
MCR03EZHJ681
MCR03EZHJ470
MCR03EZHJ103
MCR03EZHJ102
MCR03EZHJ103
MCR03EZHJ331
MCR03EZHJ332
MCR03EZHJ104
MCR03EZHJ473
MCR03EZHJ331
MCR03EZHJ103
MCR03EZHJ103
MCR03EZHJ473
MCR03EZHJ153
MCR03EZHJ103
MCR03EZHJ182
MCR03EZHJ224
MCR03EZHJ103
MCR03EZHJ224
MCR03EZHJ153
MCR03EZHJ682
MCR03EZHJ223
MCR03EZHJ103
MCR03EZHJ103
MCR03EZHJ100
MCR03EZHJ104
MCR03EZHJ224
MCR03EZHJ102
MCR03EZHJ123
MCR03EZHJ331
MCR03EZHJ104
ERJ8GEYJ101V
MCR03EZHJ105
MCR03EZHJ104
MCR03EZHJ392
MCR03EZHJ393
MCR03EZHJ823
MCR03EZHJ273
MCR03EZHJ104
MCR03EZHJ473
MCR03EZHJ124
MCR03EZHJ684
MCR03EZHJ333
MCR03EZHJ223
MCR03EZHJ333
MCR03EZHJ473
MCR03EZHJ102
MCR03EZHJ470
MCR03EZHJ103
MCR03EZHJ100
MCR03EZHJ473
MCR03EZHJ105
MCR03EZHJ103
Ver
T.E.EAH
TFH.TLH
Ref.
No.
R137
R138
R139
R140
R141
R142
R143
R144
R145
R146
R147
R148
R149
R150
R151
R152
R153
R154
R155
R156
R157
R158
R158
R159
R160
R161
R162
R163
R164
R165
R166
R167
R168
R169
R170
R171
R172
R173
R174
R175
R176
R177
R178
R179
R180
R181
R182
R183
R184
R185
R186
R187
R188
R189
R190
R191
R192
R193
R194
R195
R196
R197
R198
R199
R200
R201
R202
R203
R204
R205
R206
R207
R208
SW17
SW18
TC1
VR1
W1
W2
W3
X1
X2
XF1
XF2
Parts No. Description
RK3062
RK3069
RK3038
RK3065
RK3061
RK3058
RK3050
RK3062
RK3062
RK3040
RK3070
RK3052
RK3046
NC
RK3038
RK3046
RK3038
RK3050
RK3046
RK3048
RK3062
RK3055
RK3056
RK3038
RK3074
RK3069
RK3060
RK3050
RK3050
RK3048
RK3038
RK3048
RK3038
RK3074
RK3062
RK3062
RK3001
RK3066
RK3066
RK3062
RK3074
RK3066
RK3062
RK3062
RK3046
RK3058
RK3046
NC
RK3054
NC
NC
NC
RK3026
RK3074
RK3058
RK3050
RK3059
RK3063
RK3060
RK3050
RK3067
RK3050
RK3050
RK2042
RK3054
RK3057
RK3045
RK3050
RK3050
RK3050
RK3050
RK3052
NC
UU0030
UU0030
CT0012
RH0140
MACL07AA
MACL07AA
MACLH2GG
XQ0112
XQ0077
XF0041
XF0041
Parts Name
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
MCR03EZHJ104
MCR03EZHJ394
MCR03EZHJ102
MCR03EZHJ184
MCR03EZHJ823
MCR03EZHJ473
MCR03EZHJ103
MCR03EZHJ104
MCR03EZHJ104
MCR03EZHJ152
MCR03EZHJ474
MCR03EZHJ153
MCR03EZHJ472
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
MCR03EZHJ102
MCR03EZHJ472
MCR03EZHJ102
MCR03EZHJ103
MCR03EZHJ472
MCR03EZHJ682
MCR03EZHJ104
MCR03EZHJ273
MCR03EZHJ333
MCR03EZHJ102
MCR03EZHJ105
MCR03EZHJ394
MCR03EZHJ683
MCR03EZHJ103
MCR03EZHJ103
MCR03EZHJ682
MCR03EZHJ102
MCR03EZHJ682
MCR03EZHJ102
MCR03EZHJ105
MCR03EZHJ104
MCR03EZHJ104
MCR03EZHJ000
MCR03EZHJ224
MCR03EZHJ224
MCR03EZHJ104
MCR03EZHJ105
MCR03EZHJ224
MCR03EZHJ104
MCR03EZHJ104
MCR03EZHJ472
MCR03EZHJ473
MCR03EZHJ472
Chip R
MCR03EZHJ223
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
Chip R
MCR03EZHJ101
MCR03EZHJ105
MCR03EZHJ473
MCR03EZHJ103
MCR03EZHJ563
MCR03EZHJ124
MCR03EZHJ683
MCR03EZHJ103
MCR03EZHJ274
MCR03EZHJ103
MCR03EZHJ103
MCR18EZHJ152
MCR03EZHJ223
MCR03EZHJ393
MCR03EZHJ392
MCR03EZHJ103
MCR03EZHJ103
MCR03EZHJ103
MCR03EZHJ103
MCR03EZHJ153
Switch
Switch
Trimmer
Volume
Wire
Wire
Wire
Crystal
Crystal
MCF
MCF
EVQPJ005
EVQPJ005
CTZ3S-10A-W1-P
MVR22HXBRN472
#30A02-070-02
#30A02-070-02
#30AH1-025-H1
UM-5 21.250MHZ
38C 3.686400MHZ
UM5 21.7M 21R15A5
UM5 21.7M 21R15A5
Ver
TFH.TLH
T.E.EAH
T.E
19
Ref.
No.
Parts No. Description
Parts Name
Mechanical Parts
AF0012
AF0029
AK0001
AN0012
DG0035
DP0126
ES0011AZ
FF0029
FG0274
FG0285
FG0286
FG0289
FG0290
FG0291
FM0176
FM0177
FM0178
FM0179
FP0142
KZ0098
MACLH2GG
NK0068
RD0108
SS0092
ST0063
TG0033
TL0022
TS0142
TW0020
UE0029A
20
Screw
Screw
Nut
Speaker
Wire
OPH M2+4 FE/ZN3
0PH 2+9 FE/N 3
0PH B2+4 FE/N 3
RND N7X0.75 BR/B.ZN
LCD LIGHT
LCD PANLE DJ195
036M9014
Sheet
DC CAP
16 KEY RUBBER DJ195
JACK CAP DJ195
TERMINAL RUBBER 195
PTT RUBBER DJ195
LCD RUBBER CONNECT.
PLUS TERMINAL DJ195
RADIATIVE PLATE 195
DJ195
ANTENNA EARTH DJ195
BLIND SHEET DJ195
FRONT CASE DJ195
#30AH1-025-H1
DIAL KNOB DJ195
J1/6Z
CHASSIS DJ195
LCD HOLDER DJ195
SP HIMELON DJ195
REFLECTIVE SHEET 195
VCO case XH655
W.PROOF A XH720
ANT.CONNECT.DJ460
Ver
Ref.
No.
Parts No. Description
UR0019
YX0024
Dial
Parts Name
Ver
RH70N00E20 (RY-6320)
LCD TAPE DJ195
Packing Parts
EA57
EA58
PR0309
EBP-48N
HK0465
HM0189
HU0150
HU0151
BH0011
BB0009Y
HP0003
PR0237
DS0388A
DS0411
PS0313A
HH0061
EDC93
EDC94
PH0009A
PT0004A
PK0076
PR0421
DS0388A
DS0411
Antenna
Antenna
CE label
EBP-48N
Pacage
Carton 10
Inner C
Inner 5
Belt clip
Strap
Protection Bag 5*75*110
FCC label
Spec.sheet
Spec.sheet DJ195T
Instruction Manual
Air cap
Wall charger EDC-93
Wall charger EDC-94
Warranty
Serial No. Carton
Schematic Diagram
Serial No. label
Spec. sheet with out Serial
Spec. sheet DJ195 with out Serial
T.E.EAH
TFH.TLH
E.EAH
E.EAH.TFH.TLH
T
T
E.EAH.TFH.TLH
T
E.EAH.TFH.TLH
T
ADJUSTMENT
1) Required Test Equipment
The following items are required to adjust radio parameters:
1. Regulated power supply
Supply voltage:
Current:
5-14V DC
3A or more
Voltage range:
Current:
Input resistance:
FS = Approx. 20V
10A or more
High impedance
Measurable frequency:
Audio frequency
Impedance:
Dissipation:
Jack:
8Ω
1W or more
3.5mmΦ
Output frequency:
Output level:
Modulation:
200MHz or more
-20dBu/0.1uV -120dBu/1V
FM
Measuring range:
Up to 2GHz or more
2. Digital multimeter
3. Oscilloscope
4. Audio dummy load
5. SSG
6. Spectrum Analyzer
7. Power meter
Measurable frequency: Up to 200MHz
Impedance:
50Ω, unbalanced
Measuring range:
0.1W -10W
8. Audio volmeter
Measurable frequency: Up to 100kHz
Sensitivity:
1mV to 10V
9. Audio generator
Output frequency:
Output impedance:
67Hz to 10kHz
600Ω, unbalanced
10.Distortion meter/SINAD meter
Measurable frequency: 1kHz
Input level:
Up to 40dB
Distortion:
1% - 100%
11.Frequency counter
Measurable frequency: Up to 200MHz
Measurable stability:
Approx. +/-0.1ppm
21
12.Linear detector
Measurable frequency: Up to 200MHz
Characteristics:
Flat
CN:
60dB or more
Note
■ Standard modulation:
1kHz +/-3.5kHz/DEV
■ Reference sensitivity:
12dB SINAD
■ Specified audio output leve: 200mW at 8Ω
■ Standard audio output level: 50mW at 8Ω
■ Use an RF cable (3D2W:1m) for test equipment.
■ Attach a fuse to the RF test equipment.
■ All SSG outputs are indicated by EMF.
■ Supply voltage for the transceiver: 13.8VDC
22
2) Adjustment Mode
The DJ-195 does not require a serviceperson to manipulate the components
on the printed-circuit board, except the trimmer when adjusting reference frequency and deviation.Most of the adjustments for the transceiver are made by
using the keys on it while the unit is in the adjustment mode.Because the adjustment mode temporarily uses the channels, frequency must be set on each
channel before adjustments can be made.For instructions on how to program
the channels, see the “DJ-195 INSTRUCTION MANUAL” which came with the
product.In consideration of the radio environment, the frequency on each channel must be near the value (+/-1MHz) listed in the table below.To enter the
adjustment mode, set key lock and input 490217.Decimal point at 100MHz and
10MHz appears in LCD. (To release the mode, set key-lock and input 490217.)
Channel frequencies used in the adjustment mode
Channel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Channel function
Reference frequency adjustment
High power adjustment
Low power adjustment
Minimum frequency sensitivity adjustment
Medium frequency sensitivity adjustment
Maximum frequency sensitivity adjustment
S-meter ( 1 ) adjustment
S-meter ( FULL ) adjustment
Deviation
DTMF ( 1 ) test
DTMF ( D ) test
Tone 67 Hz test
Tone 88.5 Hz test
Tone 250.3 Hz test
DCS code 255 test
Tone burst test
Aging ( Not required to use )
Frequency
145 MHz
145 MHz
145 MHz
130 MHz
145 MHz
174 MHz
145 MHz
145 MHz
145 MHz
145 MHz
145 MHz
145 MHz
145 MHz
145 MHz
145 MHz
145 MHz
145 MHz
23
Reference Frequency Adjustment
1. In the adjustment mode, select channel 1 by rotating the main tuning dial.
2. Press the
key to start transmission.
3. Rotate TC1 on the Main board until the value on the frequency counter
matches the one displayed on the LCD.
4. On 145.05MHz measure TP1 near the VCO and to obtain 1.2V+0.1V
( If the frequency display is flashing, the PLL is unlocked. )
High Power Adjustment
1. In the adjustment mode, select channel 2 by rotating the main tuning dial.
2. Hold down the
key to start transmission.
3. While watching the reading of the TX power meter, set the output power to
the value closest to 5 W by rotating the main tuning dial.
4. When the
key is released, the output power at that time will be
stored as the high power setting.
Low Power Adjustment
1. In the adjustment mode, select channel 3 by rotating the main tuning dial.
2. Hold down the
key to start transmission.
3. While watching the reading of the TX power meter, set the output power to
the value closest to 0.8 W by rotating the main tuning dial.
4. When the
key is released, the output power at that time will be
stored as the low power setting.
Minimum Frequency Sensitivity Adjustment
See “Note on Adjusting the Sensitivity” later in this section.
1. In the adjustment mode, select channel 4 by rotating the main tuning dial.
2. Set the minimum frequency sensitivity rotating the main tuning dial, while F
appears after the
key is pressed.
Medium Frequency Sensitivity Adjustment
See “Note on Adjusting the Sensitivity” later in this section.
1. In the adjustment mode, select channel 5 by rotating the main tuning dial.
2. Set the medium frequency sensitivity rotating the main tuning dial, while F
appears after the
key is pressed.
Maximum Frequency Sensitivity Adjustment
See “Note on Adjusting the Sensitivity” later in this section.
1. In the adjustment mode, select channel 6 by rotating the main tuning dial.
2. Set the maximum frequency sensitivity rotating the main tuning dial, while F
appears after the
24
key pressed.
S-meter (1) Adjustment
1. In the adjustment mode, select channel 7 by rotating the main tuning dial.
The S-meter will show a single circle ( )
2. Enter “0”dBu(EMF) with the transceiver tester (SSG).
3. Press the F key. The transceiver beeps indicating the new setting has been
stored successfully.
S-meter (FULL)
1. In the adjustment mode, select channel 8 by rotating the main tuning dial.
The S-meter will show all six circles (
)
2. Enter “+20”dBu (EMF) with the transceiver tester (SSG).
3. Press the
key. The transceiver beeps indicating the new setting has
been stored successfully.
Deviation
1. In the adjustment mode, select channel 9 by rotating the main tuning dial.
2. Input a 50mVrms, 1KMz signal with your transceiver tester through the
external microphone jack.
3. With the tester, put the transceiver in the transmission mode.
4. Rotate the VR1 on the printed-curcuit board of the transceiver until the deviation is set to 4.5KHz.
DTMF (1) Test
This function is only for checking the DTMF code, not adjusting it.
1. In the adjustment mode, select channel 10 by rotating the main tuning dial.
2. Press the
key. DTMF code “1” is automatically sent and you will
hear the monitoring tone from the speaker.
3. Check the deviation with the transceiver tester.
DTMF (D) Test
1. In the adjustment mode, select channel 11 by rotating the main tuning dial.
2. Press the
key. DTMF code “D” is automatically sent and you will
hear the monitoring tone from the speaker.
3. Check the deviation with the transceiver tester.
Tone 67Hz Test
This function is only for checking the tone encoder, not adjusting it.
1. In the adjustment mode, select channel 12 by rotating the main tuning dial.
2. Press the
key. A 67Hz tone is automatically sent.
3. Check the deviation with the transceiver tester.
Tone 88.5Hz Test
1. In the adjustment mode, select channel 13 by rotating the main tuning dial.
2. Press the
key. An 88.5Hz tone is automatically sent.
3. Check the deviation with the transceiver tester.
25
Tone 250.3Hz Test
1. In the adjustment mode, select channel 14 by rotating the main tuning dial.
2. Press the
key. A 250.3Hz tone is automatically sent.
3. Check the deviation with the transceiver tester.
DCS Code 225 Test
1. In the adjustment mode, select channel 15 by rotating the main tuning dial.
2. Press the
key. An 255 DCS code is automatically sent.
3. Check the deviation with the transceiver tester.
Tone Burst Test
This function is only for checking the tone burst, not adjusting it.
1. In the adjustment mode, select channel 16 by rotating the main tuning dial.
2. Press the
key. A 1750Hz tone burst is automatically sent.
3. Check the deviation with the transceiver tester.
Aging
Perform this aging test only when necessary.
1. In the adjustment mode, select channel 17 by rotating the main tuning dial.
The transceiver automatically repeaters transmission for a minute and reception for another minute.
Note on Adjusting Sensitivity
Sensitivity is adjusted by applying the optimum voltage from the CPU to the
varicap of the tuning circuit.
1. Program any frequency within 145MHz +/- 1MHz on memory channel 5.
2. To enter the adjustment mode, set key lock and input 490217. Decimal point
at 100MHz and 10MHz appears in LCD. (To release the mode, set key lock
and input 490217).
3. Select channel 5 by rotating the main tuning dial.
4.
Press the
key and, while the F appears, rotate the main tuning
**” for maximizing the sensitivity (“**”
dial. Set the adjustment data to “
appears in the channel number area on the LCD).
5. Press the
key.
6. In the key lock mode, Input 490217. Decimal point at 100MHz and 10MHz
disappear. Turn the power OFF. The transceiver is in the normal status.
26
PC BOARD VIEW
MAIN SIDE A
MAIN Side B
27
SCHEMATIC DIAGRAM
28
BLOCK DIAGRAM
29
DJ-195
Service Manual
ALINCO, INC.
Head Office : “TWIN 21” MID Tower Building 25F
1-61, 2-Chome, Shiromi, Chuo-ku, Osaka 540-8580 Japan
Phone: 06-6946-8150 Fax: 06-6946-8175 Telex: 63086
E-mail: 101243.1446@compuserve.com
U.S.A. : 438 Amapola Ave., Suite 130, Torrance, CA 90501-6201, U.S.A.
Phone: 310-618-8616 Fax: 310-618-8758
http://www.alinco.com/
Germany : Eschborner Landstrasse 55, 60489 Frankfurt am Main, Germany
Phone: 069-786018 Fax: 069-789-60766
Dealer/Distributor
Copyright 1999 Alinco, lnc. Osaka Japan
Printed in Japan
PM0058