About Us 2 Container Lids 4 Replacement Bottoms 10 Compactor

About Us . . . . . . . . . . . . . . . . . . . . 2
Container Lids . . . . . . . . . . . . . . . . . 4
Replacement Bottoms . . . . . . . . . . . . 10
Compactor Parts . . . . . . . . . . . . . . . 12
Container Parts . . . . . . . . . . . . . . . 32
Roll Off Parts . . . . . . . . . . . . . . . . 42
Container Lids
Mission Statement
PRT Premier
PRT’s products are designed
to be problem solvers. Our
products are engineered to
last and we focus on efficiency
in our manufacturing process
in order to keep your cost low.
PRT carries a Premier line of
products that stand-up to the
wear and tear of daily use.
Replacement Bottoms
To utilize our financial strength and engineering know-how to develop standardized,
quality products for the Waste Industry that provide superior value for our customers
and to provide unmatched customer service by shipping these standard products
within 24 hours; or 72 hours when customization is requested by our customer.
Container Parts
Compactor Parts
PRT evaluates all products
for durability and performs
tests on our products in reallife use situations to ensure
performance standards.
We control our production
and distribution streams to
safeguard product quality and
ensure that your parts arrive
on-time.
Roll-Off Parts
1635 Elmore Street
Crawfordsville, IN 47933
Starting in 2014, all PRT product will ship from our new facility in Crawfordsville, IN.
200,000 square feet under roof
15 acres of space
1 Continued Mission
888-999-5278 | www.refuseparts.com
3
Front Load Container Lids
L = Length
Quality Manufacturing
LL == Length
Length
Container Lids
PRT’s lid manufacturing
process is designed to
maintain material integrity
while creating additional
strength in areas of “use
stress” like the hinge line
and knuckle. The materials
PRT selects for its lids, are
also used for gas tanks and
hazardous waste receptacles.
These industries are required
to select the best materials,
PRT choses to pass the best
onto its customers.
W=
W
==
WWidth
Width
Width
3.75”
3.75”
3.75”
Product Availability
In order to reduce delays in
your repair schedules, PRT
can ship lids within 24 hours of
your order.
The Premier Plus+ Series Front Load Lids
PRT can offer you a full selection of front load lids to
meet your new and replacement lid needs. PRT values its
customers and we used customer experts to assist us in
creating the Premier Plus+ product line.
PRT Premier Plus+
PRT’s focus on innovation has
led us to create a special line
of Premier Plus+ Lids. These
lids have been designed
in collaboration with our
customers to meet needs
previously unaddressed in the
marketplace. PRT carries and
entire line of these Premier
Plus+ Lids.
These lids are made from a
hybrid patented design that
offers the benefits of doublewall in hinge strength and
stiffness, while having the
center load strength and water
run-off of a single wall. PRT
listens to you – we welcome
calls and feedback from our
customers related to any
product improvement.
.938”
.938”
.938”
Designed with Customer Collaboration
During this process, PRT was able to incorporate all the
benefits of the best lids in the marketplace while reducing
overall production expenses. This has led to a cost savings
that we now pass on to you. PRT is so confident in the
resulting product that we date stamp every Premier Plus+
lid and provide you a full 5-year warranty.
Strength Hinges & Knuckles
PRT’s front and rear load lids
have strength hinges and
seamless knuckles that hold
up to 2000 pounds each. Our
one piece lids are designed to
allow for hinge movement and
lay flat behind the container
preventing damage.
Stability
PRT front and rear lids are
double-walled to provide
maximum lid life. They offer
center load strength while
being weather and crack
resistant.
Durability
PRT’s special lid design offers
flexibility to protect from lid
crushing and prevent broken
hinge rods and cracked hinge
knuckles. They also are
designed to maximize water
run-off capacity.
Front Load Lid
Lid Sizes Available:
W x L Part # 36" x 30" L.D.30.B
36" x 33" L.D.33.B
36" x 36" L.D.36.B
36" x 38" L.D.38.B
36" x 41" L.D.41.B
36" x 42" L.D.42.B
36" x 46"
L.D.46.B
36" x 47"
L.D.47.B
36" x 48" L.D.48.B
36" x 51"
L.D.51.B
36" x 55"
L.D.55.B
36" x 57" L.D.57.B
36" x 58" L.D.58.B
Container
1, 1½ yd
1, 1½ yd
1, 1½ yd
1½, 2 yd
2 yd
2 yd
3, 4 yd
3, 4 yd
3, 4 yd
3, 4 yd
6, 8 yd
6, 8 yd
6, 8 yd
These colors are available on request.
888-999-5278 | www.refuseparts.com
.75”
.75”
.75”
5-year Warranty Confirmed with
Date Stamp on Lid.
High Molecular Weight Material
PRT manufactures its Premier Plus+ lids from a High-Density
Polyethylene (HDPE). This material was selected by PRT
because it reduces up to 30% of all cracking that can result from
harsh environmental conditions. PRT uses 100% high molecular
weight material. Other lid products in the marketplace can only
offer 0-50%. PRT wants to ensure that our lids can withstand
the worst winters and the scalding sun.
5
Rear Load Container Lids
One-Piece Container Lids and Universal Container Lid
W = Width
= Length
LL =
Length
L = Length
W =W =
Width
W=
Width
L=
Length
Width
L=
Length
3.75”
1.79
1.79
.938”
.75”
.75”
.938”
.938”
5-year Warranty Confirmed with
Date Stamp on Lid.
.75”
Specialty Hinge Line
PRT pays special attention to the hinge lines of your lids. In
order to reduce your lid expenditure, PRT Premier Plus+ lids
are designed with fully stacked hinges. This means that we use
twice the material as our competitors on each hinge. Our hinge
material is also interlocked - created like door hinges. PRT
hinges are stronger than others that use a typical hook-design
where material strength rests on a single side.
888-999-5278 | www.refuseparts.com
Container Lids
W = Width
The Premier Plus+ Series Rear Load Lids
Designed with Customer Collaboration
PRT can offer you a full selection of rear load lids to meet
your new and replacement lid needs. PRT values its
customers and we used customer experts to assist us in
creating the Premier Plus+ product line.
During this process, PRT was able to incorporate all the
benefits of the best lids in the marketplace while reducing
overall production expenses. This has led to a cost savings
that we now pass on to you. PRT is so confident in the
resulting product that we date stamp every Premier Plus+
lid and provide you a full 5-year warranty.
Rear Load Lid
Lid Sizes Available:
W x L 31" x 27" 31" x 31" 31" x 37" 31" x 39" 31" x 41" 31" x 43" 31" x 45"
31" x 48"
31" x 50"
31" x 52"
31" x 56"
31" x 58" Part #
L.D.3127.B
L.D.3131.B
L.D.3137.B
L.D.3139.B
L.D.3141.B
L.D.3143.B
L.D.3145.B
L.D.3148.B
L.D.3150.B
L.D.3152.B
L.D.3156.B
L.D.3158.B
One Piece Rear Load
Lid Sizes Available:
W x L Part #
62" x 31" L.1PL.6231.B
62" x 37" L.1PL.6237.B
62" x 39" L.1PL.6239.B
62" x 41" L.1PL.6241.B
62" x 43" L.1PL.6243.B
62" x 44" L.1PL.6244.B
3.7”
3.7”
L= Length
W=
Width
Side Load Lid
Lid Sizes Available:
W x L Part #
30 x 36" L.SL.3036.B
30 x 41" L.SL.3041.B
30 x 43" L.SL.3043.B
7
Side Load Door and Carboard Recyling Container Lid
Comingle Recycling Container Lid and Accessories
Container Lids
L = Length
L = Length
W=
WidthW = Front
Load
WidthCommingle Recyling Lid
Scoop opening with extra support to
eliminate sagging.
Side Door
Handle slots create ease of use. ANSI Warning
label included on door center.
Lid Sizes Available:
W x L Part #
30" x 30" L.3030
Hinge Rods and Hinge Ears
Lid Sizes Available:
W x L Part #
36" x 58" L.REC.3658.B
PRT has a full selection of metal and nylon hinge rods. PRT Premier
Plus+ lids are designed to be easily threaded in the field by just one
person, providing you man-hour savings. PRT also has several hinge
ears to choose from, including dual hole and slot designs.
Turn to page 41 to see our full line of hinge products and container
accessories.
Yellow lids available on request
11.6”
11.6”
W = Width
W = Width
L= Length
L=
Length
W=
Width
L=
Length
Front Load
Cardboard Recyling Lid
Slotted opening for easy cardboard
insertion. Includes an easy-install hinge
rod for added support.
Lid Sizes Available:
W x L Part #
74" x 58" L.REC.7458.B
Universal Lid
Can be cut to any length.
Lid Sizes Available:
W x L Part #
31" x 45" L.UNI.3145.B
Yellow lids available on request
14.13”
888-999-5278 | www.refuseparts.com
14.13”
9
W = Width
Standard Replacement Bottoms
Product Availability
W = Width
PRT builds its own bottoms.
In order to ensure quality and
eliminate delays in shipping,
PRT manufactures and
distributes bottoms directly
from our facility. Standard
bottoms are shipped within
24 hours and custom orders
ship within 5 days. FREE
SHIPPING is also included on
all full-pallet standard bottom
orders.
L=
Length
Replacement Bottoms
L=
Length
Payment Assistance
PRT understands that every
company is on a budget. For
this reason, PRT offers its
customers a payment plan
for full-truck orders. Defer
upfront costs and pay for the
bottoms as they are used. The
full inventory is kept at your
location to ensure your repair
shop has the needed product
at its fingertips.
Product Options
Standard and Custom Bottoms Designed to Your Specifications
PRT uses heavy-duty steel
to craft our bottoms. Our
standard gauge is 11, but for
special needs, we can custom
make your bottoms from 1012 gauge steel. Sturdy auto
seam welds are used in all
PRT bottom manufacturing in
addition to bent verses welded
risers, to ensure product
strength.
PRT offers standardsize options in addition to
bottoms in custom sizes with
specializations. Rails, caps
and drain flanges can easily
be included. Riser heights
can be selected from 2.5 - 12
inches, and slanted risers are
available.
5.5"
Standard Replacment Bottoms
PRT prides itself on assisting our customers in prolonging
product life. We know that controlling your expenses
is always a concern. For this reason we offer a line of
standard bottoms as a quick and affordable alternative to
fabrication. PRT also ensures our bottoms reflect the same
quality as if you made your own – using smooth auto seam
welds and 11-gauge steel for strength and durability.
W = Width
W = Width
Standard Bottom
Sizes Available:
W x L Part #
72.5" x 36" B.7236
72.5" x 54" B.7254
72.5" x 66" B.7266
72.5" x 72" B.7272
72.5" x 80" B.7280
Quality Crafted
PRT standard bottoms are
made with 11-gauge steel,
bent risers and auto seam
welds. This method of welding
provides additional product
strength and allows for perfect
seams and sizing.
888-999-5278 | www.refuseparts.com
Cost Efficient
Replacing containers can be
costly and replacing bottoms
is time consuming. PRT’s
bottoms are made to last,
keeping replacements to a
minimum, and quick shipping
helps reduce work delays.
Variety
PRT offers a line of standard
size container bottoms, but
also provides custom options
to meet your needs. A full
variety of sizes and options
are available in risers and
rails, and drain flanges can be
included.
5.5"
L=
Length
L=
Length
Slant Bottom
Sizes Available:
W x L Part #
72.5" x 54" B.7254.S
Custom Replacement Bottoms
PRT knows that every shop has a unique container or two.
PRT can build custom bottoms in a jiffy, fabricating and
shipping within just 5 days.
Simple Steps to Create Your Specialty Bottoms:
• Provide custom measurements
• Select 10, 11 or 12 gauge steel
• Chose straight or slanted risers from 2.5" – 12"
• Include rails, caps and drain flanges as needed
45 o
5.5"
5.5"
45 o
8.5"
8.5"
1.5" Drain Hole Placed at Midpoint
1.5" Drain Hole Placed at Midpoint
11
Full Service
When repairing machinery like
compactors, expert advice
can be useful in assuring that
the best and most equitable
solution is reached. Our onstaff compactor expert can
assist you in selecting the right
parts for your machine.
Additionally, if you or your
colleagues want to further
understand more about
compactor maintenance, PRT
offers free compactor classes
to all of its customers at PRT
University.
Single Phase Power Unit
with PLC, 10HP and 12GPM
Innovative Solutions
Tri-volt three phase system. PLC unit. Features door
controls. Includes roof.
A.PU.LC.3.10
PLC unit. Features door controls. Includes roof.
A.PU.LC.1.10
PRT’s focus on innovation has
led us to create our Premier
Plus+ line of Compactor Parts.
These replacement parts have
been designed in collaboration
with our customers to meet
needs previously unaddressed
in the marketplace and to
afford you the best long-term
part solutions.
Our safety switch designed
for universal mounting
with a durable aluminum
plate, and our Cycon board
which includes component
replacement options, are
two examples of PRT’s
commitment to customer’s
success. Additionally,
PRT takes our compactor
replacement pricing seriously.
We know this is an area of
potential savings for our
customers and we pass along
the price reductions we gain
through innovation to you.
2-year warranty
from Purchase Date
on all non-cylinder
Compactor Parts.
PLC Control Panel
Includes Pendant Station For
PLC Unit. Tri-Volt Three Phase
System. 30MM Buttons.
A.CPX.LC.3
Cycon Board Control
Panel
Includes Pendant Station For
Cycon Board Unit. Tri-Volt
Three Phase System. 30MM
Buttons.
A.CPX.CB.3
Three Phase Power Unit
with Cycon Board, 10HP and 12GPM
Cycon board unit. Features door controls. Includes roof.
A.PU.CB.3.10
Standard Driver Control
PLC
Uses D018 Key.
A.CTRL.DRLC
Options
PRT offers you a full-line
of replacement parts for
your compactors. We focus
on providing a wide array
of options to meet all of
your needs. Select from
a full selection of buttons,
key switches and even
replacement keys from one of
our quality partners like Allen
Bradley.
888-999-5278 | www.refuseparts.com
Quality
PRT prides itself on identifying
the best solutions for our
customers. It is for this
reason that we have selected
to partner with the most
respected manufactures in the
industry, like Baldor and WEG,
offering you the best solution
in power unit motors.
Value
Compactor parts can be
expensive and that is why
PRT introduced our Cycon
board replacement. Our board
allows timers and relays to
be switched out allowing you
to avoid a costly full-board
replacement.
Three Phase Power Unit
with Cycon Board, 10HP and 12GPM
Tri-volt three phase system. Cycon board unit. Features
pedant station controls. Includes roof.
A.PUX.CB.3.10
Customize Your Own Three Phase
Control Panel
Standard Pendant
Control PLC
A.CTRL.OPLC.M
Standard Pendant
Control Cycon Board
A.CTRL.OPCB.M
PRT Will Provide Worksheet To Customer Allowing You To
Outline Requirements. See Page 31 for More Details.
13
Compactor Parts
Three Phase Power Unit
with PLC, 10HP and 12GPM
Transformers and Fuses
Control Panel Components
Cycon Board
Allen-Bradley Three Fuse 150VA Transformer with Primary
220/230/480V And Secondary 110/115/120V.
C.ABTRANS.M63N
PRT wants to assist its customers in avoiding costly
repairs. The PRT Premier Plus+ Cycon Board was
designed with this in mind. This Cycon board features
timers and relays that can be switched out when they fail
avoiding the need for full-board replacement.
C.PRT.CB001
8 Pin 120V Relay
8 Pin Relay/Time Base
Replacement R1 and R2 Relays
T1 Timer Replacement
Allen-Bradley Eight Pin, Two Pole Timer
Relay with Test Button.
C.ABTR.HA32A134
Allen-Bradley Eight Pin Timer Base.
C.ABTR.HN125
On-Delay 8 Pin Timer
Allen Bradley Eight Pin Timer On Delay.
C.ABTR.HRM12TA1
Allen Bradley Transformer 150VA 3-Fuse
Allen-Bradley Three Fuse 150VA Transformer. Primary
208/230/480V And Secondary 120/24V.
C.ABTRANS.M183N
Universal PLC
Littelfuse 2 AMP 250V
Littelfuse FLM Series 2
Amp/250V Fuse.
C.LF.FLM002
Littelfuse KLDR 1.5AMP
Littelfuse KLDR Series 1.5
Amp Fuse.
C.LF.KLDR01.5
888-999-5278 | www.refuseparts.com
Replacement R1 And R2 Relays For PRT
Premium Plus+ Cycon Board.
C.PRT.RL001
Replacement Interval T1 Timer For PRT
Premium Plus+ Cycon Board.
C.PRT.TM001
T2 Timer Replacement
Replacement Delay T2 Timer For PRT
Premium Plus+ Cycon Board.
C.PRT.TM002
The Allen-Bradley PLC is a universal solution for all OEM
equipment and can operate with pressure or bypass
cylinders. This PLC also has ANSI Safe Stop and photoeye functionality. Multi-cycle, advanced warning, and
container full programming is also included.
A.AB.M810.P2
15
Compactor Parts
Allen Bradley Transformer 150VA 1-Fuse
Pressure, Limit and Switches
0.75”
3.25”
0.75”
0.75”
5”
Switch
3.2
0.75”
”
5
.37
2
DescriptionPart #
Limit Switch Wobble Stick w/ Nylon Extension C.ABLS.WSP
Lever Limit Switch w/ Spring Return. Two circuit. Clockwise and counterclockwise operation. NEMA type 4 & 13.
C.ABLS.AP
Lever limit Switch w/ Spring Return. Four circuit. Clockwise and counterclockwise operation. NEMA type 4 & 13.
C.ABLS.NPTP
2
0.1
”
Allen Bradley Limit Switch Accessories
.25
Description
Part # 0
Adjustable Nylon Arm Roller Lever for Limit Switch
5”
0.75" x 0.28"; 1.19-3 Radius
C.ABLS.W2
3.2
5" Stainless Steel Rod Lever for Limit Switch 0.13" Diameter C.ABLS.W3
5”Lever for Limit Switch
Adjustable Nylon Arm Roller
7
.
0
1.5" x 0.28"; 1.19-3 Radius
C.ABLS.W2A
11.5" Stainless Steel Rod Lever for Limit Switch
C.ABLS.W3A
Universal Magnetic Safety Switch
The PRT Premier Plus+ Aluminum Magnetic Safety Switch
was created in response to customer requests for a
universal mounting solution. PRT now provides mounting
plates with enlarged holes to accommodate standard
screw sizes as an alternative to refitting or redrilling. This
Safety Switch has also been made extra durable with an
aluminum plate that outlasts other plastic designs and a
steel armored
cable providing product longevity.
”
0.75”
0.75”
0.75”
0.75”
0.75”
0.75”
5
This PRT Premier Plus+ Magnetic Safety Switch is
”
guaranteed
75to work in all situations. We are so confident
3
.
2
in this product,
that we will refund and return at our cost
should any customer encounter a ”problem.
5”
0.7
25
0.
Mag Switch Assembly:
”
.25
3
”
.75
0
Barksdale Product. Adjustable
280-3000 PSI. SPDT Single
Circuit.
C.BDPS.C9612-3
Dual Setpoint
Pressure Switch
Barksdale Product. Adjustable
280-3000 PSI. SPDT Dual
Circuit.
C.BDPS.C9622-3
“Bullet” Switch
United Electric ElectroMechanical Pressure Switch.
Includes 5' rubber service oil
resistant cable.
C.UEPS.10-E14
0.75”
0.75”
0.1
”
C.SS.MAG.PRT.AR
25
0.75”
0.75”
0.75”
3.25”
3.25”
Mount3.25”
Plate for
0.125”
0.125”
2.375”
2.375”
3.25”
3.25”
0.25”
0.25”
2.375”
2.375”
3.25”
3.25”
Mount
Plate for
0.25”
Magnet
0.25” Plate
3.25”
3.25”
0.125”
0.125”
0.125”
0.125”
3.25”
Keyed Safety Switch
Magnet
Includes mounting cable and
screws. Pre-wired with 15' of
two-conductor cable.
C.SS.ELE
2.375”
0.75”
888-999-5278 | www.refuseparts.com
0.25”
0.25”
Switch
3.25”
3.2
Single Setpoint
Pressure Switch
0.125”
3.25”
5”
Allen Bradley Limit Switches
0.25”
2.375”
2.375”
Compactor Parts
5”
0.7
2.375”
3.25”
3.25”
0.25”
0.125”
3.25”
17
Photo Eye and Flashing Alarm Kit
22MM Buttons, Switches, Keys and Contacts
Allen Bradley 22MM Push
Button Green
Allen Bradley 22MM Push
Button Blue
Allen Bradley 22MM 2 Position
E-Stop Red
Allen Bradley 22MM 2 Position
Key Selector Switch
Allen Bradley 22MM 2 Position
Key Selector Switch
22MM GE
Replacement
Key 3095
22MM AB
Replacement
Key 3825
22MM Plastic
Mounting
Latch for
Contact
22MM
Replacement
Key 455
Allen-Bradley Photo Eye Components
Description
Retro Reflective Photo Sensor
Power Base 120V AC
Right Angle Mounting Bracket (90°)
Photoswitch Relay for Sensor
3" Round Reflector Photo Eye and Flashing Alarm Kit
Part # C.ABPH.42MRU
C.ABPH.42MTB
C.ABPH.60.1785
C.ABPH.8.590
C.ABPH.92.89
K.ABPH.5000
PRT Complete Photo Eye Kit from
Allen-Bradley
Two Position Maintained/Maintained
Push/Pull E-Stop.
C.AB22.MMP44
Flashing Alarm
Description
Part # Alarm Module 120v AC Dual Circuit Single and Pulsing Tone
C.ELE.PH.ALARM
Red Cover for Flashing Light Alarm
C.ELE.PH.REDLGH
Vertical Mounting Base C.ELE.PH.BASE
Incandescent Bulb 120V AC
C.ELE.PH.INCLMP
Complete Alarm Kit (ANSI Compliant) K.ABPH.FLALRM
This Kit components are comprehensive and include ANSI required
flashing alarm components. The kit can be added to a PRT power
unit, included in a panel purchase, added to a PLC order, or you can
PRT works to create quality product solutions that improve purchase parts individually. The PRT
operational efficiencies and maximize profits. This is why
we partner only with quality manufactures like AllenComplete Photo Eye Kit includes:
Bradley whose products meet these criteria.
• Retro-reflective photo senor and power base
The PRT Complete Photo Eye Kit, used in conjunction
• 90° mounting bracket
with your compactor power unit, offers a great solution
• 3" round reflector
for compactors that need to be self-monitored due
• Relay
to location or user access restrictions. With this Kit
• Complete Flashing Alarm Kit – ANSI Required
installed, compactor operation will trigger only when trash
o 120v alarm module
accumulates beyond a preset level. This occurs within the
o 120v red flashing light & bulb (replaceable)
unit when a sender transmits a beam of light to a receiver.
o Vertical Mounting Base
When this beam of light is interrupted by a pile of trash, it
alerts the compactor to begin its compacting process.
Please call for more information on this easy trash management
solution that prevents unneeded wear and tear on your equipment.
888-999-5278 | www.refuseparts.com
With Flush Head.
C.AB22.MF6
Compactor Parts
With Flush Head.
C.AB22.MF3
Spring Return Key Selector Switch. Key
Removal Left. Uses Key 3825.
C.AB22.MKR21
22MM Contact Block
Normally Closed Contact Block.
C.AB22.X01
Maintained/Maintained Key Selector
Switch. Key Removal Left. Uses Key
3825.
C.AB22.MKM21
22MM Contact Block
Normally Open Contact Block
C.AB22.X10
C.KEY.3095
C.AB22.ALP
C.KEY.3825
Schneider Electric/
Telemecanique
Switches
C.KEY.455
19
30MM Buttons, Knobs and Key Switches
With Flush Head.
C.AB30.A1
Allen Bradley 30MM
Push Button Black
With Flush Head.
C.AB30.A2
Allen Bradley 30MM
Push Button
Red
Allen Bradley 30MM
Mushroom E-Stop
Push Button Red
Allen Bradley 30MM
Red E-Stop Legend
Allen Bradley 30MM
Off/On Legend
Allen Bradley 30MM
Reverse Legend
Allen Bradley 30MM
Start Legend
Allen Bradley 30MM
Contact Block
With Flush Head.
C.AB30.B6
C.AB30.X504
C.AB30.X529
C.AB30.X539
Allen Bradley 30MM 2
Position E-Stop Button
Red
Allen Bradley 30MM 2
Position E-Stop Button
Red
Allen Bradley 30MM
3 Position Selector
Switch
Allen Bradley 30MM
Cylinder Lock Push
Button
Allen Bradley 30MM
Contact Block
Allen Bradley 30MM
Contact Block
Allen Bradley 30MM
Contact Block
Allen Bradley 30MM 2
Position Key Switch
Allen Bradley 30MM 2
Position Key Switch
Allen Bradley 30MM 3
Position Key Switch
Allen Bradley 30MM
Cylinder Lock Push
Button
30MM Allen Bradley
D018 Replacement Key
30MM Square “D” Key
E10
30MM Allen Bradley
E158 Replacement Key
Maintained/Maintained
Push/Pull E-Stop
C.AB30.FX6
Maintained/Maintained Key
Switch. Key Removal Left.
Uses Key D018.
C.AB30.H31
Maintained/Maintained
Push/Pull Illuminated E-Stop
C.AB30.FXP16R
Standard Knob With Spring
Return To Center.
C.AB30.J91
Spring Return Key Switch. Key Maintained/Maintained/
Removal Left. Uses Key D018. Maintained Key Switch. Key
C.AB30.H48
Removal From All Positions.
Uses Key D018.
C.AB30.J44
888-999-5278 | www.refuseparts.com
C.AB30.X547
Momentary E-Stop.
C.AB30.D6
One normally open and one
normally closed. Uses key
E158.C.AB30.E14A
Push Button Key Switch With
Guarded Bezel. Uses Key
E158.
C.AB30.NX970
Normally Open/Normally
Closed Contact Block.
C.AB30.XA
For Cylinder Lock 2, 3 And 4
Position Selectors.
C.KEY.D018
Normally Open Contact Block.
C.AB30.XD1
C.KEY.E10
Normally Closed Contact
Block.
C.AB30.XD2
Compactor Parts
Allen Bradley 30MM
Push Button Green
30MM Legends, Contacts and Keys
Normally Closed Late Break
Contact Block.
C.AB30.XD4
For Push Button Cylinder
Lock.
C.KEY.E158
21
Motors and Electrical Connectors
Motor Starters and Heater Elements
Allen Bradley IEC Contactor
Weg Motor Single Phase 10HP
Baldor Three-Phase, Open, Drip-Proof,
10 HP Motor. Phases 208/230/460. 1765
RPM. 215TC Frame. UL And CSA Listed.
C.MTR.3PH10HP.B
9AMPS-45AMPS.
C.ABCO.EEFD
Allen Bradley Starter/Heater
Element
Joslyn Clark Starter/Heater
Element
WEG Motor 3 Phase 10HP
Weg Three-Phase, Totally-Enclosed,
Fan-Cooled, 10 HP Motor. Phases
208/230/460. 1750 RPM. 215TC Frame.
UL And CSA Listed.
C.MTR.3PH10HP.E
Compactor Parts
Weg Single Phase, Totally-Enclosed,
Fan-Cooled, 10 HP Motor. 1750 RPM.
215TC Frame. UL And CSA Listed.
C.MTR.1PH10HP
Baldor Motor 3 Phase 10HP
Allen Bradley Contactor
Overload Relay
43 Amp/15 HP Contactor, Three Pole
With One Normally Open.
C.ABCO.C43D10
6 Pin Base Connector
Housing with Male
Insert
10 Pin Base Connector
Housing with Male
Insert
6 Pin Hood Connector
Housing with Female
Insert
10 Pin Hood Connector
Housing with Female
Insert
A.CNT.6P.BSML
A.CNT.6P.HDFM
888-999-5278 | www.refuseparts.com
Starter Size 2.
C.ABSE.509-COD
A.CNT.10P.BSML
A.CNT.10P.HDFM
Starter Size 2.
C.JOCL.HP25U03
Allen Bradley Heater Elements
Allen-Bradley Starter/Heater Element.
Three Phase With Three-Pole Overload
Protection. Nema Full Voltage Starter. UL
And CSA Listed.
Alen Bradley Series PRT Part #
Allen Bradley Starter Element
Allen-Bradley Starter/Heater Element
W55 C.ABSE.W55
Normally Open Auxiliary Contact.
W63 C.ABSE.W63
C.ABSE.595.A
W64C.ABSE.W64
W70C.ABSE.W70
Allen Bradley Starter Element
Allen-Bradley Starter/Heater Element
Normally Closed Auxiliary Contact.
C.ABSE.595.B
23
Directional Valves and Manifolds
AYR
Check & Relief Valves, Pumps and Motor-Pump Couplings
(Our Standard Valve)
Check Valve Crackling
Delta Relief Cartridge
5 PSI/18 GPM with 50" NPT
C.HYD.CV.F50F
Four-Way Solenoid High-Flow Directional Valve with
Two Positions. Soft-Shift. NFPA 1.
C.HYD.D5S.4W2P
3 Position Directional Valve 4 Way
Four-Way Solenoid High-Flow Directional Valve with
Three Positions. Soft-Shift. NFPA 2.
C.HYD.D5D.4W3P
Compactor Parts
2 Position Directional Valve 4 Way
Delta 20GPM Max Flow Relief Cartridge.
C.HYD.RC2
D05 Universal Manifold
P
A
P
B
A
T
ow
Universal D05 12GPM Max
Flow Manifold.
P
C.HYD.D05MNFOLD
T
D05-Standard
D05-Standard
P
A
B
B
T
A
T
T
T
A
P
B
MASKA LO100 Series Motor
Coupling w/ 1.375" Diameter
Standard Keyway
C.MTR.C100.1375
B
MASKA L099-LO100 Series
Coupling Insert
Standard Keyway
C.MTR.CI100
MASKA LO100 Series Motor
Coupling w/ .875" Diameter
Keyway .25"
C.MTR.C100.875K
T
D05- High Flow
D05-Standard
D05- High Flow
D05-Standard
Alternative Manifold Flow Paths
T
A
P
A
B
T
T
B
P
T
B
A
TT
T
D03
D05-High
D05HighFlow
Flow
P
B
A
A
P
P
A
B
A
B
D05-Standard
D08
D08
888-999-5278 | www.refuseparts.com
TP
B
B
Heavy Duty 12 GPM
Gear Pump
Heavy-Duty 12 GPM Gear
Pump with 7/8"Shaft And 1/4"
Keyway. SAE A Mount. 1" NPT
Inlet And 3/4" NPT Outlet.
C.HYD.GPM12.G.K
P
D03
D03
D03
25
Self-Container Compactor Hydraulic Cylinders
Hydraulic Cylinders
C.CYL.437.CT.BP
Description: 4" x 37" x 2.5" rod 32" stroke (by-pass)
Compactor Application: Galbreath SC-2
Description: 3" x 20" x 1.125" rod 16" stroke
(pressure)
Compactor Application: 6 yard Pack-Man
Description: 1.25" dia. x 9" length. Universal adjustment
C.CYL.PIN.9
C.CYL.322.BP
Description: 3" x 22" x 1.25" rod 18.5" stroke (by-pass)
Compactor Application: MPT & Mini-Mac
Stationary Compactor Hydraulic Cylinders
C.CYL.429.BP
C.CYL.436
C.CYL.420
C.CYL.452.BP
C.CYL.436.BP
C.CYL.550.BP
C.CYL.442.BP
C.CYL.661
C.CYL.437
C.CYL.437.CT
C.CYL.661.HD
Description: 4" x 29" x 2.5" rod 25" stroke (by-pass)
Compactor Application: RJ-885C
Description: 4" x 36" x 2.5" rod 31.25" stroke (by-pass)
Compactor Application: RJ-250SC
Description: 4" x 37" x 2.5" rod 32" stroke (pressure)
Compactor Application: McClain
888-999-5278 | www.refuseparts.com
Description: 4" x 36" x 2.5" rod 31.25" stroke (pressure)
Compactor Application: RJ-250SC
Description: 5" x 50" x 2.5" rod 42" stroke (by-pass)
Compactor Application: RJ-100/RJ-250VL
Description: 4" x 37" x 2.5" rod 32" stroke (pressure)
Compactor Application: Galbreath SC-2
Description: 4" x 20" x 2" rod 16" stroke (pressure)
Compactor Application: Dumper, VIP, JP-6 & SP-16
Description: 4.5" x 42" x 2.5" rod 37.25" stroke (by-pass)
Compactor Application: TC-2
Description: 6" x 61" x 4" rod 56" stroke (pressure)
Compactor Application: RJ-225 HD
Compactor Parts
C.CYL.320
Cylinder Pin
Description: 4.5" x 42"x 2.5" rod 45.25" stroke (by-pass)
Compactor Application: TC-2.5
Description: 6" x 61" x 2.5" rod 56" stroke (pressure)
Compactor Application: RJ-225
1-year Warranty from Purchase Date on
All PRT Cylinders
27
Hydraulic Accessories
Hydraulic Accessories and Ratchet Binders
Female Quick
Disconnect
Male Quick Disconnect
Oil Level and
Temperature Gauge 3"
Oil Level and
Temperature Gauge 5"
H&F Female Quick Disconnect
with 0.50" NPT
C.HF.QDC.F.50E
Front Mount 3" Oil Level/
Temperature Site Gauge with
Thermometer.
C.HYD.OILGA.3
H&F Male Quick Disconnect
with 0.50" NPT
C.HF.QDC.M.50E
Front Mount 5" Oil Level/
Temperature Site Gauge with
Thermometer.
C.HYD.OILGA.5
Assembled Hydraulic Pressure Tester
Pressure Gauge 2.5"
3000 PSI Glycerine-Filled 2.5"
Pressure Gauge. 1/4" NPT
Bottom Mount.
C.HYD.PG25.3000
Suction Strainer
10 GPM
10 GPM Suction Strainer
with 1" Port Metal Fitting. 100
Micron.
C.HYD.SS.MT.10
Compactor Parts
Hydraulic Pressure Tester For Power Unit. Includes Pressure Tester Value, H&F Fitting And Reducer Fitting,
Elbow Fitting, Quick Disconnects, And 2.5" Glycerin-Filled 3000 PSI Pressure Gauge.
A.PRT.PT.3KCL
Color Pressure Gauge
2.5"
3000 PSI Glycerine-Filled 2.5"
Pressure Gauge with Color
Dial. Green, Yellow, Red Dial.
1/4" NPT Bottom Mount.
C.HYD.PG25.3KCL
Suction Strainer
20 GPM
20 GPM Suction Strainer with
1.25" Port Metal Fitting. 100
Micron.
C.HYD.SS.MT.20
10" Jaw-Jaw Ratchet Binder
10" Ratchet binder with two Jaw ends, 14"
Handle, 13,000 lbs. Load Bear Capacity,
7/8" Acme threads.
P.RO.RB.10.JJ13
12" Jaw-Jaw Ratchet Binder
12" Handwheel Ratchet Binder
12" Ratchet binder with two Jaw ends, 24" 12" Handwheel ratchet binder with two
Handle, 28,000 lbs. Load Bear Capacity,
Jaw ends, 8" Wheel, 28,000 lbs. Load
1 3/8" Acme threads.
Bear Capacity, 1 3/8" Acme threads.
P.RO.RB.12.JJ28
P.RO.HW.8.JJ.28
See also page 46 for PRT Roll-Off Ratchet Binders.
Contact for more ratchet binder configurations.
888-999-5278 | www.refuseparts.com
29
Compactor Accessories
Power Unit Built to Your Requirements
Standard Control Buttons on the Panel Face:
Standard PLC Buttons Include:
30MM Auto/Off/Hand Key Switch
30MM Start Push Button (Green)
30MM Forward/Reverse Spring
Loaded Manual Switch
30MM E-Stop Push Button (Red)
Standard PCB Buttons Include:
30MM Off/On Key Switch
30MM Start Push Button (Green)
30MM Reverse Push Button (Black)
30MM E-Stop Push Button (Red)
Compactor Lid Hinge Ear.
C.HE
Galbreath Door Spring 9596
Compactor Door Spring For Galbreath
6-Yard Pack-Man.
C.MP.GL.DS
K-PAC Door Spring
Compactor Door Spring For K-Pac
6-Yard.
C.MP.KP.DS
c
c
c
c
Optional Features:
5 HP
10 HP (Standard)
15 HP
20 HP
Power Unit Control Panel:
c PLC Control Panel
c Cycon Control Panel
Container Full (PLC Standard)
Advanced Warning
Multi-Cycle (PLC Standard)
Safety Door Switch
c Magnet
c Key Style
Magnetic Door Switch w/ Counter Starter
Photo-Eye Switch
Oil Heater c 230V c 480V
Optional Pendant Controls
System Power Supply:
c
c
c
c
c
c
c
Compactor Parts
Compactor Lid Hinge Ears
Customization Options:
Horsepower:
Voltage: c 208VPhase:
c Single
c 230V
c Three
c 480V
c Controls at Remote Location (12' Whip)
c Custom Whip Length: ______________
OEM Cylinder Replacement Worksheet
Shoe Blades
Description:
Cast Iron Long Shoe Cast Iron Short Shoe
Part #:
C.BLADESH.L
C.BLADESH.S
Heavy Duty Paddle Latch
Locking Heavy Duty Paddle Latch. Keys
Included.
C.PADLTCH.HD
G
Slam Latch
Standard Duty Slam Latch. Includes
Handle. Handle Only C.Slamhandle.
C.SLAMLATCH
E
I
H
B
D
(I - H = D)
E
C
F
F
Clevis Clevis
Quick OEM Match:
G
Equipment Make:___________________________ Clevis
F
Cross Tube
Cross Tube Cross Tube
Hole
Hole Bored
HoleThrough
Bored Through
Rod Bored
RodThrough Rod
Side View
Side View
Front View
Side
Front
View
View Front View Side View
Side View
Front View
Side
Front
View
View Front View
Top
View
Top ViewTop View
Front View
Front
View
Equipment Model: __________________________________
Advanced OEM Match:
Compactor Door Seal
15' Rubber P-Shaped Compactor Door
Seal.
C.SEAL.P
Compactor Door Seal
20'L X 1"W X 2.5"H Universal Compactor
Foam Door Seal.
C.SEAL.RT1
888-999-5278 | www.refuseparts.com
Track for Compactor Door Seal
92"L X 1"W X 2.5"H Track For Compactor
Door Seal.
C.SEAL.RT1.TRK
(A) Cylinder Type: c Pressure c Bypass
(B) Bore: _________________________________ (F) Pin Size:_______________________________________
(C) Rod: _________________________________ (G) Port Location (Mark with X on Drawing if Different)
(D) Stroke:________________________________ Port Fittings: c NPT c SAE c Other
(E) Mount Type:
Bore End: c Clevis
c Cross Tube
c Other
Rod End: c Clevis
c Cross Tube
c Hole Bored Through Rod
c Other
31
Product Options
PRT prides itself on being
a One-Stop Parts Shop.
We work to create part
solutions for your commercial
containers that reduce shop
works load. From a beefy ¼”
thick universal hinge ear that
allows for easy lid attachment
in several positions, to a hinge
rod that comes complete with
a nylon lock nut and washer,
we can service your shop’s
needs.
Durable Design
The Premier Plus+ Caster
forks are double-welded to
provide added strength. The
frame is also zinc-plated to
prevent rusting.
PRT Premier Plus+
The PRT Premier Plus+
Caster wheel is made in the
U.S.A.to ensure that our
quality standards are met.
The wheel’s solid construction
allows for continued wear
without breakage and frame
forks are double-welded for
strength. We are so confident
about the durability of this
product that we date stamp
our wheel and offer a full
1-year warranty. If you have
any problem during this
time, just return and it will be
immediately replaced.
Co-Polymer Wheels
PRT is committed to product quality. We also believe
in providing the best product pricing for our customers.
However, we understand that if a product lacks durability,
there is no value in the purchase.
Our commitment to quality at a good price, led us to
manufacture the PRT Premier Plus+ Caster. PRT has been
offering this caster since 2009. With encouragement from
our customers and feedback that a lack of quality wheels
existed in the marketplace, we took on the endeavor to
create a caster with a wheel that could live up to all the
abuse and use it experiences in the field. Today, we can
proudly say we have never had to replace a PRT Premier
Plus+ wheel for lack of performance or durability.
Date Stamp for Warranty
PRT offers a full 1-year
warranty on our Premier Plus+
wheel verified by a date-stamp
on the product. Our customers
refer to this wheel as bulletproof and no warranty claims
have ever been made.
Easy Maintenance
A Zerk fitting is included on
the wheel. This fitting is also
included on the swivel frame
to ensure proper ball bearing
functionality.
Container Parts
PRT’s focus on innovation
has led us to create a special
Premier Plus+ Caster. This
caster has been designed
in collaboration with our
customers to meet a need
previously unaddressed in the
marketplace – a reliable and
virtually indestructible caster.
Premier Plus+ Wheels Available:
Security
PRT values security and offers
a front auto-lock as well as
manual lock options for your
containers. We do not want
you to sacrifice this security
because of limited budgeting,
so we provide these products
at the lowest cost possible.
888-999-5278 | www.refuseparts.com
Stability
Whether you have containers
on stationary or swivel casters
or prefer foot pads, PRT wants
to provide you the best quality
products. We even offer a
caster option with a date
stamp and 1-year warranty.
Ingenuity
PRT knows that the key
to reducing repair costs
is quality craftsmanship.
It is for this reason that
our stamped pockets are
manufactured with gussets,
as this reinforcement ensures
longevity and eliminates
unneeded repairs.
Description
Part #
6x2" Premier Plus Wheel P.62CP 6x2" Premier Plus Wheel
P.62CPSW
on Swivel Caster
6x2" Premier Plus Wheel
P.62CPRG
on Rigid Caster
6x2" Premier Plus Wheel P.62CPRBSW.CMBK
on Swivel Caster with Brake High Grade Material
The Premier Plus+ Wheel is
thermoformed from a virgin
copolymer material. It is a solid
plastic design and each wheel
weight rating is 900lbs.
1-year warranty confirmed with
date stamp on wheel.
33
Customized Solutions:
Standard Casters and Wheels
How to Order Your Casters
6 x 2" Rigid Caster
and bolt included. Weight rating 1000
pounds per wheel. 1-year warranty
confirmed by date stamp on wheel.
P.62CP
6 x 2" Phenolic Wheel
Axel and bolt included. Weight rating
1200 pounds per wheel. Made in the
U.S.A.
P.62PH
6 x 2" Mold-On-Rubber Wheel
Axel and bolt included. Weight rating 400
pounds per wheel.
P.62MOR
4.45”
3.88”
.24”
4.53”
6 x 2" Swivel Caster
7.53”
6.00”
3.62”
6 x 2" Steel Wheel
2.99”
Axel and bolt included.
Weight rating 800
pounds per wheel.
P.62ST
2.60”
3.62”
6 x 2" Poly-On-Steel Wheel
2.99” Weight rating
Axel and bolt included.
1200 pounds per wheel. Non-marking
wheel.
2.60”
P.62PU
2.00”
2.97”
2.97”
Double-welded forks for
strength. Zinc-plated to
prevent rust.
P.62RG
4.45”
3.88”
1.90”
6 x 2" Rigid Caster
3. Select Brake Option (Optional)
Brake Options:
Use Code:
CAM Brake.CMBK
3.62”
2.00”
3.00”
4.45”
.24”
1.90”
3.88”
2.60”
.24”
2.97”
4. Assemble the Product Code Number:
3.62”
2.99”
4.53”
P.62 _________ _________ . _________
Wheel Code Caster Code Brake Code
4.53”
7.53”
2. Select the Caster
Caster Type: Use Code:
Swivel Caster SW
Rigid Caster RG
2.60”
7.53”
2.00”
2.97”
CAM Brake
.23”
6 x 2" Swivel Caster
6 x 2" Caster w/ CAM Brake
Can be used in conjunction with PRT swivel frame P.62SW.
P.62BRK.CM
4.45”
.23”
1.90”
3.88”
.24”
EX: For a Premier Plus+ Wheel mounted on a swivel caster with a CAM brake the code would be
P.62
CPSW.CMBK
Wheel Code Caster Code Brake Code
6 x 2" Caster Top Plate
4.53”
888-999-5278 | www.refuseparts.com
Container Parts
6 x 2" Premier Plus+ Wheel Axel
Double-welded forks for
strength. Zinc-plated to
prevent rust.
P.62RG
1. Select the Wheel
Wheel Types: Use Code:
Premier Plus+ Wheel CP
Phenolic Wheel PH Mold-On-Rubber-Wheel MOR
Poly-On-Steel
PU Steel WheelST
7.53”
PRT provides additional wheels and casters in 4" x 2",
5" x 2", and 8" x 2" sizes.
35
Corner Bracket and Foot Pads
Caster Pads
1.63”
90o
7.38”
4 x 4.5" Caster Pad
9.5" x 9.5" x 13" Two sides up with one
down. Fabricated from 3/16" steel for
durability.
P.CB2.99
Carriage bolt and nylon lock
nut included. Made of 10
gauge steel. Fits standard top
plate casters.
P.CP2
1.63”
4.5 x 6.5" Caster Pad
Carriage bolt and nylon lock
nut included. Made of 10
gauge steel. Fits standard top
plate casters.
P.CP.LP
PRT Product Efficiency –
The Quick Release Caster Pad
3.94”
PRT knows that there are never enough
hands to complete all the work required
of a secondary shop. PRT Quick
Release Caster pads can save you time
and money. These pads are designed
to allow you to easily switch out caster
wheels when they become worn or
damaged. Avoid the time and labor cost
of re-welding casters to your container
with this fast and efficient option.
5.91"
2.88”
.72”
5.42”
4.47”
Nylon insert prevents
loosening.
P.CPBOLT
Container Parts
Corner Bracket
Carriage Bolt and
Nylon Lock Nut for
Casters
3.98”
8.53"
.22”
1.50”
.22"
.73”
1.97"
3.01”
4 x 4.5" Foot Pad
6 x 6" Foot Pad
P_FP2_FootPad8in_dr
Ground footprint 3 x 4.” Fabricated from 1/4" steel for Ground footprint 6 x 8.5.” Fabricated
from 1/4" steel
durability.
for durability.
P.FP1
P.FP2
888-999-5278 | www.refuseparts.com
37
Auto Front mount
Flat Top
Auto Side mount
9.31”
7.50”
Manual and Automatic Locks
Lock Parts, Drain Plugs, and Flanges
2.50”
8.59”
10.00”
60.00”
60.00”
Auto Front mount
Slant Top
Auto Front mount
Flat Top
9.31”
15.58”
2.50”
2.50”
8.59”
10.00”
8.75”
10.00”
60.00”
Auto Front mount
Slant Top
3/16" Proof Coil Chain
Zinc plated. Cut to desired
length.
P.CHAIN.316
15.58”
3/8" Proof Coil Chain
Zinc plated. Cut to desired
length.
P.CHAIN.38
80" Schedule 40
Lock-Bar Pipe
P.LCKPIPE.80
Master Lock Padlock
Model 3K. Keyed alike same key works for all locks.
P.PL.3KA.0464
2.50”
8.75”
10.00”
80.00”
Front Mount Auto Lock
Preassembled. Bolt or weld attachment option. Powder-coated
to prevent rust.
7.50”
P.LCKFM4
Variety of Lock Options
Side mount
Front Manual
Mount
Auto Lock Slope-Container
Preassembled. Bolt or weld attachment option. Powder-coated to
prevent rust.
P.LCKFM4.45
80.00”
PRT carries a wide variety of Master Lock brand locks to meet your needs.
Featuring steel bodies, these commercial grade locks feature superior
protection from drilling and prying. PRT has an entire line of 1KA and 3KA
models to choose from. Varying sizes are available.
80.00”
Manual Side mount
Auto Side mount
Container Parts
7.50”
7.50”
80.00”
60.00”
Auto Front mount
Flat Top
Auto Side mount
9.31”
7.50”
2.50”
8.59”
10.00”
60.00”
Standard Side Mount Auto Lock
Auto Front
mount
Manual
Lock
Kit
Slant Top
60.00”
Preassembled. Bolt or weld attachment option. Powder-coated 7 1/2" preassembled arms. Universal kit for all front-load
to prevent rust.
containers. Lock bar pipe sold separately.
15.58”
P.LCK
P.LOCK-KIT
1.5" Plastic Drain Plug
Auto Front mount
Flat Top
9.31”
Threaded to ensure good fit.
P.DR-PLG.PL-1.5
2.50”
2.50”
8.75”
10.00”
8.59”
10.00”
60.00”
888-999-5278 | www.refuseparts.com
Auto Front mount
Slant Top
1.5" Steel Drain Flange
Foam Drain Plug for
Made to prevent damage during container 1.5" Holes
stacking. Designed for tight fit with plastic Actual size 2.5". Made of
plugs. P.FLANGE1.5
closed-cell foam to prevent
leaks.
P.DR-PLG.CC-2.5
39
Hinge Rods and Hinge Ears
.50”
Container Accessories
65.5" Universal
Rear-Load Hinge Rod
1/2-13 UNC
1.50”
65.50”
1/2" zinc-plated steel rod.
Straight end threaded. Second
end bent to 90°. Nut and
washer included.
P.HR.65
Lift Eye
3 3/8" W x 5 5/8" L Lift Eye. Fabricated
from 3/8" steel for durability.
P.LIFTEYE
4" x 4" Gusset 3/16" thick
Single Slot Hinge Ear
Single elongated hole for multiple position Fabricated from 3/16" steel for
durability.
placements. Made from 1/4" think steel
P.GUSSET.44
plate.
P.HE.SLOT
4" x 4" Gusset 1/4" thick
0.78”
1.50”
0.78”
0.87”
HOLES
0.68”
0.47”
1.13”
1.88”
76.50”
1/2" zinc-plated steel rod.
Straight end threaded. Second
end bent to 90°. Nut and
washer included.
P.HR.76.5
1.88”
.50”
Fabricated from 1/4" steel for durability.
P.GUSSET.44.25
76.5" Universal
Front-Load Hinge Rod
1/2-13 UNC
0.52”
3.25”
4.00”
76.5" Heavy Duty
Universal Front-Load
Hinge Rod
1/2-13 UNC
1.50”
76.50”
5/8" zinc-plated steel rod.
Straight end threaded. Second
end bent to 90°. Nut and
washer included.
P.HR.76.5-5/8
Dual-Hole Hinge Ear
4.00”
0.375”
Two 9/16" diameter holes for two placement options.
Made from 1/4" think steel plate.
P.HE1
Container Parts
.50”
35.62”
18.03”
76" Double Threaded
Front-Load Hinge Rod
1/2" zinc-plated steel rod.
Both ends threaded. Nut and
washer included.
P.HR.76
888-999-5278 | www.refuseparts.com
76" Nylon Hinge Rod
Made of UHMW polyethylene
to improve durability. Locking
washers included.
P.HRN.76
36" Stamped Pocket Assembly
Made of 10-gauge steel. Stamped not welded for additional
strength. 5-year warranty.
P.SLV.36
4.50”
9.13”
5-year warranty from Purchase Date for
all the PRT Stamped Pocket Assembly.
41
Timely
PRT can ship all standard
roll-off parts within 24-hours.
We recognize that waiting on
a part can create end-user
dissatisfaction. PRT not only
wants to maintain its excellent
reputation in the marketplace,
we want to help you maintain
yours too.
PRT Premier Plus+
PRT’s focus on innovation has
led us to create our Premier
Plus+ Roll-Off Conversion Kit.
This kit has been designed
in collaboration with our
customers to meet a need
previously unaddressed in
the marketplace. Roll-Off
containers can now be easily
adapted from a hook truck lift
to a hoist.
Hook Plate Assembly
Assembled Roll-Off hook and pull plate with long nose roller
bracket. 1.25" Thick plate and hook for heavy load capacity.
P.RO.HOOKASMBLY
Roll-Off Conversion Kit
Dog House
PRT recognizes that in your day-to-day operations you
often are required to modify equipment to the situation
for which it is used. PRT provides parts that can not only
withstand the use and abuse of a variety of applications,
but provide you opportunity for easy adaptation.
The Roll-Off Conversion Kit
includes a dog house, bull
nose, hook lift assembly plate,
and nose rollers. Regardless
of the type of container you
purchase, this kit gives you
the flexibility to get all your
containers quickly adapted
for use and also provides you
an option when these areas
experience damage.
Dog House has 22"L X 12"W
X 22"H Hold. Made from
11-gauge steel
P.RO.DH
Our Roll-Off Conversion kit allows you to easily convert
your roll-off container from a hook lift to a hoist-fitted
container. Includes a dog house, two bull noses, hook and
plate assembly, and two 4" x 6" nose rollers.
What the Kit Includes:
Description Part #
Hook Plate Assembly
P.RO.HOOKASMBLY
Dog HouseP.RO.DH
6" Nose Roller
P.NRA.46
Roll-Off Bull Nose
P.RO.BN.W
888-999-5278 | www.refuseparts.com
Cost Savings
New containers are costly
and often exceed established
budgets. To allow for
affordable and timely repairs,
PRT offers pans and channels
specifically designed for roll-off
containers.
Durability
PRT knows containers take a
beating, and for that reason
we take pride in the durability
of all of our container parts.
Our Ground Rollers have a
40,000 lb. weight capacity and
are constructed from ¼ inch
think solid steel.
Full Kit
K.ROF.CONV
6" Nose Roller
6" W Nose Roller with Axel
- 4" diameter. Solid cast iron
roller.
P.NRA.46
Roll-Off Parts
Efficiency
PRT knows every shop
benefits from saving time
and often needs to convert
containers quickly. With our
Roll-Off Conversion Kit, an
A-frame container can quickly
be fabricated for a Universal
lift. These kits can also be
used to make speedy damage
repairs.
Roll-Off Bull Nose
Made of 1"steel.
P.RO.BN.W
43
Ground Rollers and Side Plates
Nose Rollers and Accessories
Ground Rollers
Nose Rollers
PRT Ground Rollers feature a carbon steel axle with zerk fittings. The
wheel diameter is 8" and pre-assembled 1/4" Thick steel side plates are
available.
Ground Rollers Available:
Description 6" W Ground Roller 6" W Ground Roller w/ Side Plates 8" W Ground Roller 8" W Ground Roller w/ Side Plates 10" W Ground Roller
10" W Ground Roller w/ Side Plates PRT Nose Rollers are made of solid cast iron for maximum durability and
are 4" in diameter. We also use 1" thick steel for our Bull Nose and ½”
thick steel for our Nose Roller Brackets increasing product longevity.
Nose Rollers Available:
Description 4" W Nose Roller
6" W Nose Roller Nose Roller Bracket Roll-Off Bull Nose
Part #
P.GRA.86
P.GRA.86.SP
P.GRA.88
P.GRA.88.SP
P.GRA.810
P.GRA.810.SP
P.NRA.44
Part #
P.NRA.44
P.NRA.46
P.NRA.BRACKET
P.RO.BN.W
P.NRA.BRACKET
6.50”
6.00”
6.00”
8.50”
10.50”
6.00”
12.50”
6.00”
8.00”
10.00”
4.39”
4.00”
6.00"
5.56"
7.50”
7.50”
7.50"
1.50”
1.50”
1.50"
1.50”
1.50”
1.50”
1.50"
3.00"
Standard Side Plate
8.00”
5.50”
7.00”
P.GRA.86.SP
8.00”
7.50”
9.50”
9.00”
11.50”
P.GRA.88.SP
P.GRA.810.SP
P.NRA.46
P.RO.BN.W
9.00”
8.50”
The PRT Promise:
At PRT our priority is our Customers. If you need a part for a Commercial Container,
Roll-Off Container or Compactor, we have a solution for you. Our promise to you is
that if we don’t have it, we will direct you to someone who will.
Roll-Off Parts
8.00”
8.00"
8.86"
.47"
6.39”
6.00”
Our Customer Service Team will be happy to assist you with the following:
• Product selection assistance
• Freight-free options
• Bulk order options
• Expedited shipping
888-999-5278 | www.refuseparts.com
• Lower cost - same quality part alternatives
• Order delivery times
• Order placement aid
• Payment, credit, or delayed billing options
1.63”
7.00”
45
Ratchet Binders
Steel Tub Pans, Channels and Accessories
Dead Hook Lift
Manufacturing process guarantees part
consistency for ease of replacement.
P.RO.HOOKLIFTDD
10" Jaw-Jaw Ratchet Binder
10" Ratchet Binder with one Jaw and one Hook end, 14"
Handle, 13,000 lbs. Load Bear Capacity, 7/8" Acme threads.
P.RO.RB.10.JH13
Hinge
Complete assembly includes hinge pin.
P.RO.HINGE
Hook with Pull Plate
1" Thick plate and hook for heavy load
capacity.
P.RO.HOOKPULLPL
10" Eye-Eye Ratchet Binder
10" Ratchet binder with two Eye ends, 14" Handle, 13,000 lbs.
Load Bear Capacity, 7/8" Acme threads.
P.RO.RB.10.OO13
See also page 29 for PRT Compactor Ratchet Binders.
Contact for more ratchet binder configurations.
44"W x 56.7"H
Tub-Style Roll-Off Replacement Pan
44"W x 56.7"H
Tub-Style Roll-Off Replacement Pan
Double Roll-Off Channel
Dog House
Made from 11-gauge steel.
P.RO.TUBPAN.SM
Roll-Off Parts
Height is 24.7" above bend, 32" below bend. Features a 122°
interior angle. Made from 9-gauge steel. P.RO.TUBPAN.LRG
PRT’s focus for the last 17 years has been on providing our customers the best products at the best price. Check out our
Compactor Parts Section on Page 12 to see how you can save on your purchase of compactor parts.
We offer compactor parts up to 30% less than the competition and warranty all non-cylinder parts for two years.
888-999-5278 | www.refuseparts.com
12"deep with two 3" high channels separated by 30.25"wide
plate.
P.RO.CHNL.12
Dog House has 22"L X 12"W X 22"H Hold. Made from
11-gauge steel
P.RO.DH
47
The PRT Promise
At PRT our priority is our
Customers. If you need a part
for a Commercial Container,
Roll-Off Container or
Compactor, we have a solution
for you. Our promise to you is
that if we don’t have it, we will
direct you to someone who will.
Our focus for the last 17
years has been to ensure our
customers are at the center of
all of our business practices.
Customer satisfaction with
our products and service has
allowed us to continue our
success and growth. We look
forward to continuing our
partnership with you.
PRT
850 Supreme Dr.
Bensenville, IL 60106
888-999-5278