PXI Short Form Catalog

PXI Short Form Catalog
www.geotestinc.com
GEOTEST
PXI Digital CATALOG
PXI Digital
G
eotest offers the widest selection of PXI digital instrumentation in the industry. With over 20 different models
and configurations in both 3U and 6U formats, our instrumentation offers users a variety of interface options
and capabilities for a broad range of static and dynamic digital test applications. Our static digital instrumentation
offers high channel count density as well as a wide selection of I/O interface options via our GX57xx series of
I/O modules. Similarly, you will find that our dynamic digital instrumentation offers the highest performance,
broadest selection, and best value in the industry. Geotest’s impressive array of products includes our deep
memory GX528x and GX529x instruments and our GX5055, the new benchmark for PXI digital instrumentation,
which rivals high-end VXI digital I/O products. When combined with our digital waveform editor and display
tool DIOEasy, which supports all of our dynamic digital products, the task of test program development and
debug is greatly simplified. When you compare features and performance, Geotest’s family of dynamic digital
instrumentation offers the best value, capabilities, and selection in the industry.
For over 20 years, Geotest has been a leader and pioneer in card modular, PC-based digital test
instrumentation. Today, our digital instrumentation and systems are deployed in a broad range of functional test
applications and industries ranging from component to board to LRU/system level testing. We encourage you
to review our catalog of digital test instrument offerings and welcome your inquiries regarding special needs or
requirements for digital test applications.
Applications
Board level functional test
• Suggested instrumentation: GX5050, GX5055, GX5051,
GX5150 and GX5152
• Applications and capabilities:
Bus emulation for processor based PCBs
Flexible sequencer supports stimulus / response
testing with external event conditions for digital
logic board assemblies
■ Replacement for Summation functional test system
■ Major / minor timing cycles for processor bus
support
■
■
Communication & video test
• Suggested instrumentation: GX528x & GX529x
• Applications and capabilities:
■ Deep memory allows capture and generation of multiple
HD video frames
■ Flexible and repeatable test solutions for video
component testing and signal generation
■ Generate / monitor high-speed serial and parallel TTL /
LVDS interfaces for baseband and digital IF applications
Avionics test
• Suggested instrumentation:
GX5050, GX5055,
GX5731, GX5733
• Applications and
capabilities:
■ Wide selection of
I/O configurations
supports a broad
range of logic
families and voltages
■ Static and high
performance digital
options supports
a variety of LRU /
SRU test needs and
requirements
Digital component
functional test for ASICs &
FPGAs
• Suggested instrumentation: GX528x & GX529x
• Applications and capabilities:
■ Deep memory & high channel count
■ LVDS and full TTL logic family support
■ High data rate support
■ Cost effective solution for prototype and
verification test applications
2
Toll Free: 888-TEST-BY-PXI • Phone: 949.263.2222 • Fax: 949.263.1203 • email: sales@geotestinc.com • www.geotestinc.com
GEOTEST
PXI Digital CATALOG
Feature
GX5050
GX5055
GX5150 / GX5151
GX5152 / GX5153
Format
6U
PCI (GC5050)
6U
6U – 2 slot (GX5150 - master)
6U – 1 slot (GX5151 - slave)
6U – 2 slot (GX5152 - master)
6U – 1 slot (GX5153 - slave)
On-board Clock
Frequency Range
5 Hz to 50 MHz
5 Hz to 50 MHz
5 Hz to 50 MHz
5 Hz to 50 MHz
Maximum Vector Rate
50 MHz
50 MHz
50 MHz
50 MHz
Channels
32
32
32
32
Maximum Channels per Domain
512
512
512
512
Dynamic Direction Control
Yes
Yes
No
No
I/O Control
Per Byte
Per Channel
Per card ( 32 channels)
Per card (32 channels)
Major / Minor Cycle Time Set
No
No
No
Yes
Data Formatting
No
NR, R1, R0, RZ, RC, CC
No
No
Per-pin Deskew
No
Yes
+/- 10 ns, < 1 ns resolution
No
No
File Formats
Flat ASCII and ASCII with DIO
commands
Flat ASCII, ASCII with DIO
commands, DTIF
Flat ASCII and ASCII with DIO
commands
Flat ASCII, ASCII with DIO
commands, Summation DSR
format
I/O Channel
Logic Levels
Configurable with GX59xx I/O
Modules
Programmable per channel,
-10 volts to +15 volts;
Dual level drive and sense.
Configurable with GX59xx I/O
modules (one per card)
Configurable with GX59xx I/O
modules (one per card)
I/O Termination
Resistive1
Programmable2
Resistive1
Resistive1
Slew Rate Control
No
.1 V/ns to 1 V/ns, programmable
per channel and for rising /falling
edge transitions
No
No
Programmable Vector
Width vs. Memory Depth
No
No
Yes
8/16/32
channel configurations
Yes
8/16/32
channel configurations
Vector Depth
256 Kb per channel or
1 Mb per channel
512 Kb per channel
256 Kb / channel
to 32 Mb/channel
( depending on memory
configuration)
256 Kb / channel
to 32 Mb/channel
( depending on memory
configuration)
1. 390 ohm pull up;
330 ohm pull down
User configurable
2. ±24 ma pull up / pull down;
-10 to +15 commutation voltage range
GX5910
3
GX5930
PXI Dynamic Digital I/O Features
GX5281
GX5282
GX5283
GX5292 / GX5292e
GX5293
3U
3U
3U
3U
3U
5 Hz to 50 MHz
5 Hz to 100 MHz
5 Hz to 100 MHz
5 Hz to 100 MHz
5 Hz to 200 MHz
50 MHz
100 MHz
200 MHz
100 MHz
200 MHz
32
32
32
32
16
32 at vector rates < 100 MHz
256
256
256
256
128 / 256
No
No
No
Yes
Yes
Per Byte
Per Byte
Per Byte
Per Channel
Per Channel
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Flat ASCII and ASCII with DIO
commands
Flat ASCII and ASCII with DIO
commands
Flat ASCII and ASCII with DIO
commands
Flat ASCII and ASCII with DIO
commands
Flat ASCII and ASCII with DIO
commands
TTL/LVTTL/CMOS/LVCMOS
1.4 to 3.6 prog. output level
TTL/LVTTL/CMOS/LVCMOS
LVDS/LVDM/M-LVDS
1.4 to 3.6 prog. output level
TTL/LVTTL/CMOS/LVCMOS
LVDS/LVDM/M-LVDS
1.4 to 3.6 prog. output level
TTL/LVTTL/CMOS/LVCMOS
LVDS/LVDM/M-LVDS
1.4 to 3.6 prog. output level
TTL/LVTTL/CMOS/LVCMOS
LVDS/LVDM/M-LVDS
1.4 to 3.6 prog. output level
Resistive1
Resistive1
Resistive1
Resistive1
Resistive1
No
No
No
No
No
No
No
Yes
1 / 2 / 4 / 8 / 16 / 32
channel configurations
Yes
1 / 2 / 4 / 8 / 16 / 32
channel configurations
Yes
1 / 2 / 4 / 8 / 16 / 32*
channel configurations
*At vector rates < 100 MHz
32 Mb per channel
64 Mb per channel
128 Mb/channel (32 channels) to
4 Gb (one channel)
64 Mb/channel (32 channels) to
2 Gb (one channel)
128 Mb/channel
(16 channel configuration) to
4 Gb (one channel)
GX59xx I/O modules for GX5050 & GX515x DIO
Feature
GX5910
GX5930
GX5940
GX5960
Channels
32
32
32
32
TTL
Programmable,
Two groups of 16, with
independent drive and
threshold voltages for each
group
PECL
LVDS
+/- 24 ma output current,
180/390 termination
(socketed & software controlled)
Driver:
Drive Hi: 0 to +9 volts
Drive Lo: 0 volts
Drive current: +/- 100 ma,
200 ma max per 8 channels
45 ohm source termination
Sensor:
Input threshold: 0 to +9 volts
Bias current: +/- 10 na
Output:
Vhi: + 4.1 V (nom.)
Vlo: +3.2 V (nom)
Drive current: 50 ma (4
channels)
Input:
Differential input: 350 mv, min.
68 ohm differential input
termination
+/- 8 ma output current @
2.4 Voh, .4 Vol,
100 ohm differential input
termination
Logic Levels
Input/Output Characteristics
4
Toll Free: 888-TEST-BY-PXI • Phone: 949.263.2222 • Fax: 949.263.1203 • email: sales@geotestinc.com • www.geotestinc.com
GEOTEST
Static Digital I/O
PXI Digital CATALOG
Model
Format
Channels
Configuration Control
I/O Interfaces
Description
GX5641
3U
64
Per channel
Bidirectional TTL /
RS422
Translator or static I/O
control
GX5642
3U
64
Per channel
Bidirectional TTL /
LVDS
Translator or static I/O
control
GX5731
6U
224
Per byte
TTL (128 channels) &
I/O modules (96 channels)
224 channel I/O card.
Can use up to (3)
GX57xx I/O cards
GX5732
6U
224
Per byte
7, 32 bit, TTL ports
224 channel I/O card.
(4) 8-bit 50 MHz
counters
GX5733
3U
128
Per byte
TTL (96 channels) & I/O
module (32 channels)
128 channel I/O card.
Can use one GX57xx
I/O card
GX57xx I/O modules for GX5731 & GX5733 DIO
Model
5
Channels
Description
Input / Output Characteristics
GX5701
32
Digital Input latch with programmable threshold,
4K of memory per channel,
Handshaking
Input threshold:
-30 V to +30 V, 1 mV resolution
GX5702
32
Digital Output latch,
4K of memory per channel,
Handshaking
TTL and CMOS compatible
GX5703
32
Digital Input latch with programmable threshold,
4K of memory per channel,
Handshaking
LVDS compatible
GX5704
32
Digital power output latch,
4K of memory per channel,
Handshaking
Optically coupled, open collector outputs; 50 volt,
500 ma outputs
GX5705
32
RS-232 to TTL conversion
RS-232 compatible inputs or outputs, direction
configurable on a byte basis
GX5709
32
RS-422 Differential Digital I/O
RS-422 compatible inputs or outputs, direction and
termination configurable on a byte basis
GX5710
32
LVDS Digital I/O
LVDS compatible inputs or outputs, configuration
on a byte basis, includes software enabled
termination
GX5711
16
Bidirectional LVDS-TTL converter ,
Data can be sourced / read via software
LVDS & TTL input and output
direction and termination programmable on a byte
basis
GX5712
16
Bidirectional RS-422 to TTL converter,
Data can be sourced / read via software
RS-422 & TTL input and output
direction and termination programmable on a byte
basis
Software
•Graphical vector development environment for all of Geotest’s
dynamic digital I/O products
•Supports creation/editing of vectors via a graphical interface or
embedded scripting environment
•Supports vectors up to 512-bits wide and 128 MS deep
•File compression algorithm reduces DIO file size
•Converts ASCII vector formats to/from DIO formats for all Geotest
digital I/O instruments
•GUI environment supports interactive control and status of all
Geotest dynamic digital instruments
Description
Digital I/O (DIO) systems are very complex and typically require a
substantial amount of programming effort to define data vectors. In
order to simplify the process, Geotest developed Windows-based
DIOEasy—providing users with a familiar interface for developing,
debugging, and executing digital test vectors. DIOEasy toolbars
and menus provide quick access to vector editing and viewing
tools.
Features
DIOEasy offers two methods for creating and editing digital test
vectors:
•Graphical User Interface (GUI) Environment
•Scripting Environment
DIOEasy
Graphical
Editor
DIO
Panel
Scripting
Editor
Function
Library
ActiveX
Objects
DIO Driver
DIO Boards
Vectors can be loaded to and from DIO instrument(s) using
the DIO Virtual Panel. After loading the vectors, the user can
arm and trigger the instrument for generation/ acquisition.
Data captured from the boards can be saved to a file and/or
loaded to DIOEasy for viewing or for comparison against a
previously defined vector data file.
Graphical User Interface
DIOEasy’s GUI offers interactive digital vector editing and
viewing. Its generic structure allows it to easily support
all of Geotest’s dynamic digital instrument hardware
configurations. DIOEasy produces vector data files that
can be directly used by the digital instrument’s driver
(GTDIO).
Similar to a spreadsheet application, each cell represents
the state of a single data bit in a given step. The data
bits (channels) are represented by trace lines in the rows
of cells, and each step is a column of cells.
Scripting
DIOEasy allows you to create, design, and edit vectors
using Microsoft Visual Basic Script™ (VBScript)—a
popular scripting language. Using the capabilities of
VBScript and DIO ActiveX objects, the user can write
complex programs that create and modify DIO vectors.
6
Toll Free: 888-TEST-BY-PXI • Phone: 949.263.2222 • Fax: 949.263.1203 • email: sales@geotestinc.com • www.geotestinc.com
1770 Kettering
Irvine California, 92614-5616
TF: 888.837.8297
Tel: 949.263.2222
Fax: 949.263.1203
E-Mail: info@geotestinc.com
www.geotestinc.com
Copyright © Geotest – Marvin Test Systems, Inc. All rights
reserved. Product and company names listed are trademarks
or trade names of their respective companies. Revision B.