PLTTB8UI - Manuals

BALANCE
L
CAUTION
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE
ORSHOCKHAZARD,DONOTEXPOSETHISAPPLIANCETORAINORMOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrow·
head symbol, within an equi·
lateral triangle is intended to
alert the user to the presence
ofuninsulalad'dangerousvoHage
within the product's enclosure
that may be of sufficient
magmtu~e to constitute a risk
of electnc shock to persons.
WARNING :TOREDUCETHE
RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK) NO USER
SERVICEABLE PARTS
INSIDE REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL
.
The exclamation point within
an equilateral triangle is intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in
the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
1.) Read these instructions.
2.) Keep these instructions.
3.) Heed all warnings.
4.) Follow all instructions.
5.) Do not use this apparatus near water.
6.) Clean only with dry cloth.
7.) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8.) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9.) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized
plug has two blades with one wider than the other. Agrounding type plug has two blades
and a third grounding prong. The wide blade or the third prong is provided for your
safety. If the provided plug does not fit into you outlet, consult an electrician for
replacement of the obsolete outlet.
10.) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and point where they exit from the apparatus.
11.) Only use attachments I accessories specified by the manufacturer.
12.) Unplug this apparatus during lightning storms or when unused for long periods oftime.
13.) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
14.) This appliance shall not be exposed to dripping or splashing water and no objectfilled
with liquids such as vases shall be placed on the apparatus.
15.) Do not overload wall outlet. Use only power source as indicated.
16.) Use replacement parts as specified by the manufacturer.
1
L
PREPARATION FOR USE
UNPACKING AND SET UP
• Carefully remove the unit from the display carton and remove all packing
material from the unit.
• Unwind the DC power plug and extend it to its full length.
• Unwind the speakers and extend it to its fuillength(open the speakers
fastener(L/R).
• Place the unit on a stable, level surface, convenient to an AC outlet, out of
direct sunlight, and away from sources of excess heat, dust, moisture,
humidity, or strong magnetic fields.
• Connect the plug to your AC outlet.
• Raise the lid to expose the phonograph. The phonograph has been secured
for shipment with a transit screw. Use a coin or screwdriver to tum the transit
screw clockwise. This will allow the turntable to .. float".
TRANSIT SCREW
2
L
• Remove the opaque white plastic stylus
cover from the phonograph stylus by
sliding it in the direction of the arrow.
Discard the stylus cover.
TONE ARM LOCK LEVER
• Remove the twist-tie that was used to
secure the tone arm during shipment.
Release the tone arm lock lever.
STYLUS COVER
• Connect the plug to your AC outlet.
POWER SOURCE
This system is used dc adaptor operate on normal 120V 60Hz DC only.
Attempting to operate from any other power source may cause damage to the
system, and such damage is not covered by your warranty.
NOTE: If this plug will not fit into your outlet, you probably have an out-dated
non-polarized AC outlet. You should have you outlet changed by a qualified
licensed electrician. The DC adaptor output DC 12V, push in DC jack.
Please pull the power plug during shock and unused for a long time.
The power plug and power jack should be matched as a suitable make and
break device, in order to make operation conveniently.
IMPORTANT: Raising And Lowering The Lid
To open the lid, raise it as far as it will go until the lid support bracket 'locks' in
the open position. To close the lid, lift it upward slightly until the lid support
bracket 'unlocks' ,and then gently lower the lid.
TO AVOID DAMAGING THE CABINET OR THE LID, NEVER FORCE THE LID CLOSED.
ALWAYS RAISE THE LID TO RELEASE THE LID SUPPORT BRACKET.
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These'feet'are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on
your furniture. However certain types of oil based furniture polishes, wood
preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and
leave marks or a rubber residue on the furniture. To prevent any damage to your
furniture we strongly recommend that you purchase small self-adhesive felt
pads, available at hardware stores and home improvement centers everywhere.
3
L
LOCATION OF CONTROLS AND INDICATORS
FRONT PANEL
6)
9) Turntable's Fastener plug
Phonograph Lid.
Phonograph Lid Support Bracket. 10) BALANCE control
11) BASS control
Speakers
12) VOLUME control
Turntable.
13) FUNCTION control
IPOD slot
14) POWER Button
Handle
7)
8)
Phones jack
Turntable's Fastener
1)
2)
3)
4)
5)
15) PC port
BACK PANEL
16
m
m
17
I
I
Gp
I
16) DC IN Jack
17) AUX IN Jack
b~
18) DC SUPPLY COMPARTMENT
19) DC SUPPLY COMPARTMENT
FASTENER
~.. ~~
I
19
18
4
L
PHONOGRAPH
3
1) Turntable.
2) 45 RPM Adapter.
3) Transit Screw.
\1---t-4
4) Cue Lever.
1-+----if~
Elf-+-5
,---+-6
5) Speed Selector
11--+-7
(33 &45 &78 RPM).
2'-t-{3EI)
6) ToneArm Lock.
7) Tone Arm with Stylus.
AUX IN OPERATION
1) Set the VOLUME to desired location.
2) Place the POWER/FUNCTION control to AUX position, insert the audio
cable (not included) into the matching "AUX IN" socket of the unit
(PLTTB8UI),operate A as usual and through the speaker of PLTTB8UI, you
will hear the sound exported from A.
PLTTB8UI
I
I'
external device(A)
{J/b
J
3) Place the Mp3 player (not included) into the Mp3 player slot of the left
on the unit, insert the AUX IN plug into the Mp3 player phones jack, you
will hearthe sound exported from PLTTB8UI.
MP3/MP4 .....
PLTTB8UI
BASS ON/OFF OPERATION
Rotate the BASS to control the bass boost MIN. or MAX.
BALANCE OPERATION
Rotate the BALANCE to counterpoise the speaker sound(LlR).
5
L
PLAYING RECORDS
This system includes a full-size, 3-speed, belt-drive turntable. You can play 33,
45, and 78 RPM records.
1)
Rotate the VOLUME control to set the Volume to a low level.
2)
Set the POWER/FUNCTION selector(AUXlPHONOIOFF) to the PHONO
position.
3)
Make sure that you have removed the stylus cover from the stylus and
have released the Tone Arm Lock that secured the tone arm to the tone
arm rest.
4)
Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78
RPM. If you are playing 45 RPM singles, place the 45 RPM adapter on
the center spindle.
5)
Place your record on the center spindle.
6)
Raise the CUE lever to lift the tone arm off its rest. Move the tone arm to
the edge of the record. The turntable starts automatically. Use the CUE
lever to gently lower the tone arm on to the record.
Adjust the VOLUME control to the desired level.
When the tone arm reaches the end of the record it automatically returns to
the tone arm rest and the record player stops.
7)
8)
9)
To turn the system 'off' , rotate the POWER/FUNCTION control to OFF
position.
NOTE: Do not tum or stop the turntable manually. Moving or jarring the
Turntable without securing the Tone Arm clamp could result in damage to the
ToneArm.
IMPORTANT!!
• TO PROTECT THE TURNTABLE FROM DAMAGE DURING TRANSPORTATION, A
SILVER TRANSIT SCREW IS LOCATED AT THE UPPER RIGHT OF THE
TURNTABLE PLATFORM.
~
• BEFORE PLAYING, PLEASE USE A SCREWDRIVER TO
TURN THE TRANSIT SCREW IN A CLOCKWISE DIRECTION
(SCREW GOING DOWN) COMPLETELY TO UNLOCK THE
TURNTABLE.
• TO LOCK THE TURNTABLE AGAIN FOR TRANSPORTATION,
PLEASE TURN THE SCREW IN COUNTER-CLOCKWISE
DIRECTION.
[)I
t
[jI
• REMOVE THE PAPER MAT FROM THE TURNTABLE
BEFORE PUTTING YOUR RECORD ON THE CENTER~
SPINDLE.
.
6
-..
L
AUX IN/PHONO RECORDING (Quick-Start Guide)
1, Set the FUNCTION toAUX or PHONO position, playback the
tacks on theAUX or PHONO.
2, Install the soft disc and step by step to fix the Audacity in the computer.
3, Set the computer before record:
1) Set the volume control--+ attribute--+ record® --+ mixer: SSS USB Audio
Device .... YES and then adjust the volume to max ..
2) After open the Audacity, choose--+ Edit --+ preferences enter the
Audacity preferences, choose Recording --+ Device(AK5371);
3) then choose quality_Default sample format --+ 16-bit;
4) choose Interface again, the language to choose the ENGLISH, choose
OK to sure all sets. and press the SKIP TO START, PLAY, RECORD,
PAUSE, SKIP TO END button of the Audacity soft to set you want
RECORD the tracks.
4, After recording, you can edit the record and export to WMV format.
7
L
Audacity and USB Connection
It supports Wind0w95lWindow XPlWindow 7Nista or more advanced version,
with the EMS memory more than 128MB and Audacity takes space of 5MB.
INSTRUCTION FOR PC RECORDING
I. Software installatioo
1.1. Insert the CD disk into drive of PC, and read it;
1.2. Open the software, double press the file "Audacity.exe", then press "next" to go forward;
Welcome to the Audacity Setup
Wi z ard
II ~ reoarrnended IMt)'OU oboe .. other ~otO:m before
cono:~
1.3.Choose I accept the agreement.and press "NEXT"to go forward;
!~ Setup - AudaClty
~!p;;. ~
License AglIl'ement
Please re."j the folowing ~t¥ll nOllTlation before continui1g.
PIe"se leoo the following License Agreement You !TRJst ~cept the terms 0/ this
~eemeot before contirUrlg with the instal.!l:ion
Note: Audacity is dctributed lXlder the terms 0/ the GNU GPL
Tm ncludes everylhng in the s(Uee code dstribution
except code in the lib-SIC oiIed",y. Code in the Iib-src
dliectOly ~ be released unde! ... da'ferenl license
(which is GPL·e«opatible~ For o!I S\.rllI"MIV. see the
README_lid file. MICI fe" speclic: deI.5iIs. see the k:ense
"ormation inside each StbirectOl'J 0/ Iib-src.
The I.... te:.rt 0/ the GNU GPL folows:
~
_ _ _ _ _~G::::
NU GENERAL PUBLIC LICENSE
C@,~cePfihe,e5i~
O r:Jo noIl1CCept the ~eement
8
v
1.4. Presa "next" to go forward;
~ Setup - Aud acity
~ ....
Info".etion
PI" .. reod the f ~ ~t ....: r.t«"'-'ot"'" beI« .
coroo:~
udoci,y: A F,... C,c>.-F'I>tlorm DigiI:>1 Audo Edio:or
01';"' 1. 2,6
For chrrgeIog, tH ~,. botlom oi l", downenI,
h!IQ' 1itud4!' ,,",«coiO/Q!I r.tIl
Emat ar..dao<)J-heIp@Ut., ..... ceforlll,'*
Leod Delo'eiopero:
Dominic M....... !projed leader)
Moll Brct>ock
Jome. Crook
Y,~,J ,*,,"""
v
15. ChOOIIII the dcIritination location, andpRlllll to go forward;
'~Setup
~ ..... ~
Aud aCIty
Se lect De.tinotion L""otion
'Where ohoUd Audoci,y be imlolod?
<
.TI !
,if'"
I
AI leosl 9.3 '-4B 01 1,0. <ht space ~ ,eqied
9
t
t OWte
b
1.6. Press ''next'' to go forward;
~ Setup - Audac~ty
~ -
Select Additional Ta s h
\\IIic:h acIdtionoI t...h .hooJd be ped""...ed?
Seled the addil:ionaI laik. you """"-':l like Selup to peflDml ..... rJ!IaIi-lo A~. then
dick N~ >1
AdditIonaIlCOrn:
o 2.~~fs9=~O!j
O..... ta.k.
o euocu:e Audady proied tile.
1.7. Waitting fur installation finished. and press "fiDish" to end the installation;
Completing the Audacity Setup
Wizard
s ~ hM lrished;.,' I..... Aurnc.yonycu~ OI. The
~ ion 1M'} be Iao.n::hed by - . . . the ;", loIed >cons
1.8. Choose the language as users need;
AudaClty JI" s t Run
ct.o . ..
~04;'
rRl
c., b doc;ty to '... ImiiiC!!miiiiiiiiiiiiiI3
",]
r8J
2.Recording:
2.1. Open the software;
2.2. Choose "Edit" menu, then choose "Preferences";
.0<
Ctrl+Z
ClrHY
II
•
Ctrl+X
Ct.-He
Ct .. l+V
Ctrl+T
Ctrl+K
CtrHL
Ctrl+D
S.l . ct
Fu,d Ze .. ,> Crossincs Z
2.3.Audacity Preferences
..... :/11'•.1.· • • ] .."
'........
•.... 1_
fB";--.IC> ~
.~~,,~
IJ
: : : : , : - 0,
o
,
0
'
.....
..
- - -,
'w .." I <I . , ..... ~. I ..... 'N ... I I••~ 'u. I •• ,...N~
...
"1.,~.~~"._;:;;;;_;;;;c.~,._",-------__,,3
,.
I)
I)
,.
.!l.!J
==-"""_____3
~
r 11 ... . ,y... .ok> .",L ............ .,.
r .. " ..... ".,...... ,3'1 ...... ..-... ... "
,." .. "" ,, '
,.
, .Iio
SSS USB Audio Dovico
bot_.-."'...""..I ..... ""'III ......
0-.'."."" __ 1-",'"
11
L
NOTE: you need to check your computer audio properties,the
sound recording should be selected "sss usb Audio Device" as below.
So\.nd *,Nci;
'0
Qda./!lieJc;e
~~T"' hdo
r-cc",,"--n-.-'11
,~
01 nutoC
Jc,iI!lQIId
~t:.:d.
~ Oet&.l!cIe;rte
..:=:::J ""~ os WnetSj. sw So,'Ith
I ""'" I
OK
2.4. Adjust the output and input volume.
Output Volume
Input Volume
2.5.Select the record button· to record the disc, the left and right tracks
will show on the interface;
flit tel
.J.fJ-'l
... fl' _ _... OfOlJ - - . . I!OI>
~
*
N
"
• ..
p ...
j'"
0
rj_III.I_l!!.:.;
".
m
"
D
Is.....
~,9 p" f;..
"'
'u
"'
h ., '"
;,
~
"'
i~
" OJ'.,
.,
"'
..
.W
O"' __ ' ...... .,.,_~6..,...
_"'" ' '<11
.... 1.......
0..",.""<0,,,,"'_
~''''''l
12
~
" "l
' ''
L
2.5.1 Press this button ·,start recording.
2.5.2® Click the ~ button to skip to
2.5.3(7)Click the ~ button to skip to end;
2.5.4®Click the ~ button to play;
2.5.5®Click the II button to pause the record play,
2.5.6@)Clickthe _ button to stop the recording.
3. Export the Music Files for WAV,MP3,Format.
• Once you have finished recording, you should save your music to the
computer.
• Click File menu and move down to Export as WAV format,MP3format or
Ogg Format.
• Click on any format to save the music. and you will be asked for the file
name of the music recording.
• Note: Audacity does not export MP3 files directly, you should download
the LAME MP3 encoder. Alink to find LAME MP3 can be found at
http://audacity.sourceforge.net
Ifdo not see the sund waves on the Interface,when recording please
adjust the line in volume as follows;
Specific Steps as follows:
3.1) Download"lame-enc.dll"file,and install it to the software list.
3.2) Open the"Audacity"software,click Main Menu. Select"edit",
"Parameter", "File Formats", and dick the "Searcher"
li10 l o... t. I Spoo1roV ....
1Dirocl .r i .. 1Into.f..,. 1l.yb.ord I lou," I
M
rh."
r
r.
i.porti", un<o.pr .... d .udi. £i l .. into Aud.,;ty
..ko. COPT of tl>. fil. b.{OTO . dit; .., (..fo.)
Rud di r.oUr fr ... ,h. ori,inol £il . (f " '.r)
Un' ..p . .... d bport lond
I....v OI;« ... {I
1& b it I'CI )
iJ
....V OiIier.nit), Si",.d 16 b,. I'CII
OGG bpor l SHup
OGG ..... olily :
rs
O
---t---- "
Mf3 bporl S,lup
11"3 Lib.ary V.nion
I.J.III ..3.\12
BitRo...
~
Find l.ib • ...-,.
C.,..,ol
13
I
OK
I
L
3.3)After opened, it will come to the following menu, click"YES" to go to
"Uame-enc. dll", and find the file"s location.
Audanty Preferences
' i1.
" r~ ."
IS•• dr' .,- ... . I Dir. ot ori .. 1I n'.r h o< I r.yb , .,-~ I I ou ..
I h .n i o, ortin, uno oo.r . .. . . . udio f i l .. into J.ud" ity
10k • • copy , f ,h. fi1 . b . f or • • • itin, (.. f .r)
Road dir.dly f r o. ,h. ori , ino.l f i l . (f u t.r)
r
r.
Uno oopr . .. . d !x. or' For . .'
jlAY
(IIi"" ,n
::::J
15 bit I'CI )
UV (\'I i " " , n ), Si ",. d 15 b it I'CII
OOG lx. ort S.tu.
OOG
~uo.l i t y :
rs
0
Aud"ity d, .. not oxp ort I P3 fi1 .. dir.dly, but in. t .. d u . .. ,h.
f rooly .voi hbl . lJ.I! l i br ..-y to 1." ,,11 . 1f3 fi1 • • nco din, . I ou ou . t
, , "in l _ ,_,no. oll ... . .-.'.ly, by d" nl " din,
lJ.I! 1f3 .nco • • r, and th.n
f or h d. city . I ou only n .. d t o do , hi . on"
,h.
1".,. ,hi. fil .
3.4)After you find the"lame-enc.dl"file,open it and dick "yo to finish the
installation.
Auduily
oonh,
d. t .
l ••m
RourL... U5
,
· t~k ~l~~ L.__-=:-__-r,===:::::::::::::::::::::=:,,______~~-;
(J(L
(1)
:::oJ
:::::J
Il.o_onc
jOnly 1"'_0.... <Ill
r
OJ
14
(11.)
L
THE TURNTABLE DRIVE BELT IS FACTORY FITTEDUSE THESE INSTRUCTIONS ONLY IF THE TURNTABLE
FAILS TO REVOLVE ....
STEP 1
Use a screwdriver to remove the black iron C-clip and lift
the turntable off the phonograph mechanism.
~~H(}f,~
Iron binder ~..\.)~~~
Small column point
STEP 2
Retrieve the dropped black rubber turntable drive belt
and replace it around the column on the bottom of the
turntable, then pull it out gently without overstretching
and hook the band around the small column point at the
edge of the turntable, as shown in the diagram.
STEP3
To fix the turntable back onto the phonograph mechanism,
make sure the column point is positioned over the correct
place on the phonograph mechanism, while placing the
axis of the turntable in the hole on the phonograph
mechanism, as shown in the diagram.
STEP 4
Gently turn the turntable until a 'pop' sound is heard,
which indicates the repositioning of the rubber band.
Replace the C-clip to secure the turntable.
15
Rubberband
~
I
I
I
I
I
0