Bulb, Spiderlite, 90-05 (102-811_902-949_902

Patented Technology
www.spiderlite.com
info@spiderlite.com
Tel: 416-244-0499
Expanding LED Replacement Lightbulbs
Replaces Brake, Tail, Turn Signal Lightbulbs
5X2WW2
5 ARM MODEL
WHITE COLOR
SHOWN
NEW!
Now Available in
White and Amber Colors!
5X2WR2
5X2DR2
3X2WR2
3 ARM MODEL
RED COLOR
SHOWN
5X2SR2
SEMA AWARDS WINNER!
FEATURES:
•AVAILABLE IN RED, AMBER AND WHITE!
POINT OF PURCHASE DISPLAY
•UP TO 3X THE BRIGHTER THAN THE ORIGINAL SPIDERLITE
•FORMS A BRIGHTER DISTINCTIVE PATTERN
•LEDs ON BOTH SIDES OF ARMS PRODUCES EVEN
ILLUMINATION IN TAILLIGHT MODULE
3X2WR2
•NO MODIFICATIONS TO YOUR VEHICLE REQUIRED
•CONNECTS TO STANDARD WIRE HARNESS SOCKETS
•COLLAPSES FOR INSTALLATION THROUGH A STANDARD
MOUNTING HOLE
•AUTOMATICALLY EXPANDS AFTER PASSING THROUGH THE
MOUNTING HOLE
PONTIAC SOLSTICE
ACURA TSX
NEW!
RETAIL PACKAGING
(2-PACK)
GENERAL SELECTION GUIDE
SPIDERLITE X2 APPLICATION CHART
Approximately 3.0 inches
1
5 ARM MODEL
PART No.
(SINGLES)
5 ARM MODEL
PART No.
(SET OF 2)
5X2WDGA (RED)
5X2WDGW (WHITE)
5X2WDGY (AMBER)
5X2WR2 (RED)
5X2WW2 (WHITE)
5X2WY2 (AMBER)
5X2WDGAX (RED CROSSOVER)
5X2WDGWX (WHITE CROSSOVER)
5X2WDGYX (AMBER CROSSOVER)
5X2WR2X (RED CROSSOVER)
5X2WW2X (WHITE CROSSOVER)
5X2WY2X (AMBER CROSSOVER)
REPLACES :
1157, 2057
European P21/5W
(BAY15d)
5X2BASA (RED)
5X2BASW (WHITE)
5X2BASY (AMBER)
5X2SR2 (RED)
5X2SW2 (WHITE)
5X2SY2 (AMBER)
REPLACES1:
1156 (BA15s)
3X2WR2 (RED)
3X2WW2 (WHITE)
3X2WY2 (AMBER)
3X2WDGAX (RED CROSSOVER)
3X2WDGWX (WHITE CROSSOVER)
3X2WDGYX (AMBER CROSSOVER)
3X2WR2X (RED CROSSOVER)
3X2WW2X (WHITE CROSSOVER)
3X2WY2X (AMBER CROSSOVER)
5
REPLACES2:
3156, 3356, 3456
3157, 3357, 3457
3057, 4157
5X2DR2 (RED)
5X2DW2 (WHITE)
5X2DY2 (AMBER)
3X2WDGA (RED)
3X2WDGW (WHITE)
3X2WDGY (AMBER)
4
2.80in
71mm
5X2BYDA (RED)
5X2BYDW (WHITE)
5X2BYDY (AMBER)
3 ARM MODEL
PART No.
(SET OF 2)
3
3157 BULB
1. Determine the bulb type which will be
replaced.
Refer to vehicle owners manual. In this case it
is the 3157 bulb.
1
3 ARM MODEL
PART No.
(SINGLES)
2
2. Measure the approximate size of the
lightbulb compartment
with a ruler or tape measure.
In this case, the measurement is 3.0 inches.
Spiderlite X2 requires three (3) inches or more
in diameter for the arms to open fully.
This application would take the 5 arm
Wedge socket in the small size. (Part#
5X2WR2)
3. Follow the Spiderlite installation guide.
2.60in
66mm
DO NOT FIT CHART
Spiderlite will NOT fit in taillights that do not have sufficient space for the
arms to open fully. The chart below shows taillight housings that will
NOT fit the Spiderlite.
REPLACES3:
7440, 7443
HOUSING TOO
NARROW FOR
ARMS TO
OPEN FULLY
BULB MOUNTING FROM
THE SIDE WILL TYPICALLY
NOT ALLOW ARMS TO
OPEN FULLY
HOUSING WALLS
TOO CLOSE FOR
ARMS TO OPEN
FULLY
Notes:
1. 1156 and 1157 series sockets are generally used for vehicles model year 1998 and older.
2. 3xxx series wedge sockets are generally for 1998 and newer domestically manufactured vehicles.
3. 74xx series wedge sockets are generally for late model Japanese imports.
SPIDERLITE INSTALLATION GUIDE
1. Refer to your vehicle owners manual
and review the lightbulb replacement
procedure.
2. First, connect Spiderlite to wiring harness socket.
Test the function of the Spiderlite.
Note: Wedge based Spiderlites are polarity sensitive.
If LED bulb fails to light, remove bulb, turn it 180 degrees,
and re-insert.
4. Insert Spiderlite through the
mounting hole. (Rear View)
5. Before re-mounting the wire harness socket, the
Spiderlite arm orientation can be adjusted by
rotating the body relative to the socket.
This is done to make pairs of Spiderlites symmetrical.
3. Fold Spiderlite arms into the
collapsed configuration.
6. Spiderlite automatically opens after passing
through the mounting hole. Re-mount the
wiring harness socket.