Untitled - Gentec International

www.gentec-intl.com
Providing the accessories you need from
quality brands you can rely on.
Imaging Accessories
Electronic Accessories
Mobile Phone Accessories
Everything you need is at your fingertips at www.gentec-intl.com
Sporting Goods
www.gentec-intl.com, Tel. 905.513.7733, Fax. 905.513.7740, sales@gentec-intl.com
Manfrotto Photo Accys
MANFROTTO 030 HEXAGONAL PLATE W/1/4in
FIXING SCREW
MANFROTTO 030 HEXAGONAL PLATE W/3/8in
FIXING SCREW
030-14
030-38
$44.95
$44.95
• Hexagonal quick release plate with 1/4’’ screw.
• Hexagonal quick release plate with 3/8’’ screw.
MANFROTTO 030 ARCHITECTURAL HEXAGON PLATE
W/1/4in FIXING SCREW
MANFROTTO HEXAGONAL PLATE W/VHS 1/4in
LOCATING PIN
030ARCH-14
030VHS-14
$54.95
$54.95
• Provides alignment for 90° shots with 35mm SLR camera
www.gentec-intl.com
• Hexagonal quick release plate with VHS Locating Pin 1/4’’
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO CAMERA STUD FOR 035 SUPER CLAMP
MANFROTTO MONOPOD BELT POUCH
037
080
$29.95
$44.95
• Plugs into Super Clamp 035 socket
• To mount cameras, directly or with a camera
head. 3/8” and 1/4” threads.
• Worn on a belt, the easy to use 080 pouch offers
support for the base of a Monopod.
MANFROTTO ADAPTER 1/4in TO 3/8in
MANFROTTO ADAPTER SMALL 1/4in - 3/8
088
088LBP
$19.95
$24.95
• Female 1/4”-20 to Male 3/8” Thread Adapter
www.gentec-intl.com
• Converts 1/4’’ screw to 3/8’’
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO HEAVY DUTY VIDEO DOLLY FOR 535
536 528XB 117B
MANFROTTO HEAVY DUTY VIDEO DOLLY SPIKED FEET
FOR 545G/GB 546G/GB
114
114MV
$499.95
$499.95
• Heavy duty, super sturdy dollies are designed
for use with large still and video tripods
• They feature large 127mm individually
braked wheels with cable guards
• Folds for transporting.
• Heavy duty, super sturdy dollies are designed
for use with large still and video tripods
• They feature large 127mm individually
braked wheels with cable guards
• Folds for transporting.
MANFROTTO SUCTION CUP/RETRACTABLE SPIKED
FOOT FOR 695CX
MANFROTTO SUCTION CUP/RETRACTABLE SPIKED
FEET (3) FOR 190CXPRO4
116SC1
116SCK3
$59.95
$109.95
• A rubber suction cup foot with retractable stainless steel spike
• The suction cup increases the suitable area of
the foot of the monopod by almost 20 times,
giving much greater stability when needed
• The foot can be removed and replaced
at will. For monopod 695CX.
www.gentec-intl.com
• Rubber suction cup foot (set of 3) with
retractable stainless steel spike
• The suction cup increases the suitable area of the
feet, giving much greater stability when needed
• The foot can be removed and replaced at will
• For tripod: 190CXPRO4
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO RUBBER SPIKED FOOT FOR 695CX
MANFROTTO SPIKED FEET (3) FOR 190CXPRO4
116SP1
116SPK3
$34.95
$74.95
• Reversible rubber/metal spiked foot
supplied with a dedicated fixing tool
• The spike is made of a special hard anodized
aluminum alloy extremely resistant to corrosion
• For monopod 695CX
• Reversible rubber/metal spiked feet (set of 3)
supplied with a dedicated fixing tool
• The spike is made of a special hard anodized
aluminum alloy extremely resistant to corrosion
• For tripod: 190CXPRO4
SUCTION CUP/RETRACTABLE FEET (3) for MK/
MT293A4, MKBFRA4-BH
RUBBER SPIKED FEET (3) for MK/MT293A4,
MKBFRA4-BH
12SCK3
12SPK3
$94.95
$74.95
• Suction Cup Feet for Aluminum Tripods
• Compatible with MT/MK293A4 - MKBFRA4
www.gentec-intl.com
• Spiked feet for Aluminum Tripods
• Compatible with MT/MK293A4 - MKBFRA4
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO 131 HEXAGONAL PLATE W/1/4in FLAT
SCREW
MANFROTTO 130 HEXAGONAL PLATE W/3/8in FLAT
SCREW
130-14
130-38
$49.95
$49.95
• Hexagonal quick release plate with 1/4’’ screw.
• Hexagonal quick release plate with 3/8’’ screw.
MANFROTTO ACCESSORY ARM FOR 2 HEADS
MANFROTTO ACCESSORY ARM BLACK FOR 2 HEADS
131D
131DB
$129.95
$129.95
• Mounts on any column with 3/8’’ thread, this side arm allows
positioning of two heads on a 90° perpendicular angle.
www.gentec-intl.com
• Mounts on any column with 3/8’’ thread, this side arm allows
positioning of two heads on a 90° perpendicular angle.
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO ACCESSORY ARM BLACK FOR 4 HEADS
MANFROTTO MAGIC ARM W/RC2 QR PLATE
131DDB
143RC
$214.95
$269.95
• Mounts on any column with 3/8” thread, this side arm allows
positioning of two heads on a 90° perpendicular angle
• Two positional head mounts on the side arm
allowing the possible mounting of four heads.
• Your extra arm in the studio
• One lever locks three pivot points
• Supplied with a quick release camera plate with
secondary safety lock based on the 200PL-14 system
• Ideal for mounting a camera or a camcorder exactly at
the angle you need it. Fits any 5/8” female sockets
• Works especially well with 035 Super Clamp.
MANFROTTO FLASH SHOE 1/4in MALE ATTACHMENT
MANFROTTO SPECIAL ADAPTER 1/4in TO 3/8in (SET
OF 5)
143S
148KN
$29.95
$21.95
• Flash shoe with 1/4’’ male attachment
www.gentec-intl.com
• These special bushings adapt a 3/8Inch thread to 1/4- Inch- 20
• Great for adapting heads or cameras
• Set of 5
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO TILT-TOP HEAD WITH QUICK RELEASE
PLATE
SUCTION CUP, RETRACTABLE FEET (3) for MK/MT
293A3 190XPRO4 190GO!
155RC
15SCK3
$114.95
$84.95
• Not strictly a tripod head, but an extremely versatile
camera support for compact and 35mm cameras
used in conjunction with Super Clamp 035
• Supplied with quick release camera plate
and secondary safety lock.
• Suction Cup Feet for Aluminum Tripods
• Compatible with MT/MK293A3 - MT/
MK294A4 - MK/MT190XPRO4
RUBBER SPIKED FEET (3) - MK/MT293A3 , MK/MT
293A3 190XPRO4 190GO!
MANFROTTO SUCTION CUP/RETRACTABLE SPIKED
FOOT FOR 676B 694CX 559B
15SPK3
160SC1
$64.95
$54.95
• A rubber suction cup foot with retractable stainless steel spike
• The suction cup increases the suitable area of
the foot of the monopod by almost 20 times,
giving much greater stability when needed
• The foot can be removed and replaced at will
• For monopod 694CX.
www.gentec-intl.com
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO SUCTION CUP/RETRACTABLE SPIKED
FEET (3) for MT055CXPRO4
MANFROTTO RUBBER SPIKED FOOT FOR 676B
694CX 559B
160SCK3
160SP1
$79.95
$34.95
• Rubber suction cup foot (set of 3) with
retractable stainless steel spike
• The suction cup increases the suitable area of the
feet, giving much greater stability when needed
• The foot can be removed and replaced at will
• For tripods: 190XB, 190XDB, 190XPROB,
190CX3, 190CXPRO3, 055CXPRO4
• Reversible rubber/metal spiked foot
supplied with a dedicated fixing tool
• The spike is made of a special hard anodized
aluminum alloy extremely resistant to corrosion
• For monopod 694CX.
MANFROTTO RUBBER SPIKED FEET (3) for
055CXPRO4
MANFROTTO APRON SUPPORT FOR TRIPODS
160SPK3
166
$74.95
$64.95
• Reversible rubber/metal spiked feet (set of 3)
supplied with a dedicated fixing tool
• The spike is made of a special hard anodized
aluminum alloy extremely resistant to corrosion
• For tripods 190XB, 190XDB, 190XPROB,
190CS3, 190CXPRO3, 055CXPRO4
www.gentec-intl.com
• Three compartments hang below the column
supported by straps above the leg locks
• Fits most Manfrotto tripods
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO ALUMINUM TABLE FOR PROJECTORS
MANFROTTO 190 SHORTER CENTRE COLUMN
183
190XSCC
$84.95
$79.95
• Made of sturdy aluminum, this 9.8’’ x 13.75’’ (25cm
x 35cm) platform can support up to 44lbs (20kg)
• Ideal as a projector or monitor stand.
• The shorter column improves the tripod’s positioning flexibility.
If you need to work with legs set at the third angle of inclination
(about 60°) but still need to be able to move the camera up
and down to achieve perfect adjust your shot perfectly, this
shorter column replaces the one supplied with the tripod.
SUCTION CUP/RETRACTABLE FEET (3) for MK/MT
294A3 190X3 190XPRO3
RUBBER SPIKED FEET (3) for MK/MT 294A3 190X
190XPRO3
19SCK3
19SPK3
$104.95
$64.95
• Suction Cup Feet for Aluminum Tripods
• Compatible with MT/MK294A3 - MK/MT190XPRO3
www.gentec-intl.com
• Spiked feet for Aluminum Tripods
• Compatible with MT/MK294A3 - MK/MT190XPRO3
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO RECTANGULAR PLATE W/1/4in FIXING
SCREW and 3/8in BUSHING
MANFROTTO ARCHITECTURAL RECTANGULAR PLATE
W/3/8in FIXING SCREW
200PL
200PLARC14
$34.95
$49.95
• Ideal for quickly attaching all compatible Manfrotto products
equipped with RC2/Q2 attachment to the camera
• The compact dimensions and the lightweight aluminum
construction allow to stay always attached under the
camera without adding weight and dimension
• The grip rubber maintains the camera safely
attached providing maximum precision
when moving and setting the camera
• Rapid Connect Architectural Mounting Plate with 1/4’’ screw.
MANFROTTO ARCHITECTURAL RECTANGULAR PLATE
W/1/4in FIXING SCREW
MANFROTTO UNIVERSAL ANTI-TWIST SPOTTING
SCOPE PLATE
200PLARC38
200USS
$49.95
$119.95
• Rapid Connect Architectural Mounting Plate with 3/8’’ screw.
www.gentec-intl.com
• This adapter plate has been specifically designed to eliminate
unwanted rotation of the spotting scope during viewing
• Its universal design means it can be used to mount
all makes of spotting scope, no matter what their foot
shape (square, rectangular, trapezium), on any Manfrotto
two-way head with rapid RC2 connector system
• The adapter is made from machine-tooled
aluminum with a black anodized finish
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO SUCTION CUP/RETRACTABLE SPIKED
FOOT FOR 679B 680B 558B
MANFROTTO SUCTION CUP/RETRACTABLE SPIKED
FEET (3) FOR 055CXPRO3
204SC1
204SCK3
$64.95
$74.95
• A rubber suction cup foot with retractable stainless steel spike
• The suction cup increases the suitable area of
the foot of the monopod by almost 20 times,
giving much greater stability when needed
• The foot can be removed and replaced at will.
• Rubber suction cup foot (set of 3) with
retractable stainless steel spike
• The suction cup increases the suitable area of the
feet, giving much greater stability when needed.
The foot can be removed and replaced at will
• For tripods: 055CX3, 055CXPRO3
MANFROTTO RUBBER SPIKED FEET (3) for
MT055CXPRO3
MANFROTTO CAMERA MOUNTING ADAPTER W/3/8in
THREAD
204SPK3
208
$64.95
$44.95
• Reversible rubber/metal spiked feet (set of 3)
supplied with a dedicated fixing tool
• The spike is made of a special hard anodized
aluminum alloy extremely resistant to corrosion
• For tripods: 055CX3, 055CXPRO3
www.gentec-intl.com
• Allows use of 3/8” camera mounting plate in to 16mm socket
• Compatible with 035 Super Clamp and
484RC2 or 486RC2 Ball Head
• Diameter: 59.5mm.
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO CAMERA MOUNTING ADAPTER
HEXAGONAL PIN W/3/8in THREAD
SUCTION CUP/RETRACTABLE FEET (3) for MK/
MT055XPRO3
208HEX
22SCK3
$44.95
$74.95
• The main feature of the 208HEX is the hexagonal pin which,
compared to the 208’s round one, gives more grip when used
to hold heavy cameras mounted on photo or video heads in
combination with accessories like the super clamp 035.
• Suction Cup Feet for Aluminum Tripods
• Compatible with MK/MT055XPRO3
RUBBER SPIKED FEET (3) for MK/MT055XPRO3
MANFROTTO TRIPOD SNOW SHOES
22SPK3
230
$69.95
$44.95
• Spiked feet for Aluminum Tripods
• Compatible with MK/MT055XPRO3
www.gentec-intl.com
• Attach to tripod feet or monopods to provide
stability in snow, mud or soft ground (set of 3).
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO SPIKED FOOT FOR MONOPOD
MANFROTTO PUMP CUP WITH FLAT BASE
236
241FB
$49.95
$144.95
• Converts 679, 680 and 681 series monopods’
rubber foot to a spiked foot.
• Suction Cap for lightweight photographic and
video equipment, such as 35mm SLR, digital
cameras and lightweight video cameras
• The 60mm diameter disc with a 3/8” W male
thread is built in the pump cup and enables you
to mount most of Manfrotto’s heads.
MANFROTTO CAR WINDOW POD
MANFROTTO VARIABLE FRICTION ARM W/RC2 QR
PLATE
243
244RC
$54.95
$249.95
• Can be fixed to surfaces up to 60mm thick
• Has 2 x 3/8’ male threads for mounting ball head and camera.
www.gentec-intl.com
• Articulated arm with large locking knob
• Variable friction and locking of arm
obtained by adjusting the knob
• Supplied with quick release camera plate with secondary
safety lock based on the 200PL-14 camera plate mechanism
• Ideal for mounting a photographic or video
camera exactly at the angle you need it
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO FLASH ADAPTER FOR METZ
MANFROTTO SUCTION CUP/RETRACTABLE SPIKED
FOOT FOR 681B 557B
248
250SC1
$29.95
$64.95
• A special long 1/4” camera screw used in
conjunction with the hexagonal 030 camera plate
which allows you to fit the Metz flash bracket.
• A rubber suction cup foot with retractable stainless steel spike
• The suction cup increases the suitable area of
the foot of the monopod by almost 20 times,
giving much greater stability when needed
• The foot can be removed and replaced at will.
MANFROTTO RUBBER SPIKED FOOT FOR 681B 557B
MANFROTTO EXTENSION FOR TABLE TOP TRIPOD
1/4in THREAD
250SP1
259B
$34.95
$54.95
• Reversible rubber/metal spiked foot
supplied with a dedicated fixing tool
• The spike is made of a special hard anodized
aluminum alloy extremely resistant to corrosion
• For monopod: 681B
www.gentec-intl.com
• The Manfrotto 259B Extension is designed to be used
with the Bogen Manfrotto 209 Table Top Tripod
• This extension gives 6”-10” height adjustment for your pod.
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO ADAPTER FOR NIKON FLASH
MANFROTTO TELEPHOTO LENS SUPPORT
262
293
$29.95
$129.95
• Converts Nikon flash mount to universal flash bracket.
• Support for medium telephoto lens
• The length of the bracket is adjustable to take
different length lenses and different diameters
by tilting the Tilt Head 234RC (included)
• Length from head to lens support
adjustable from 200 to 295mm
• Attachments: four 3/8” female and three 1/4” female.
MANFROTTO ADDITIONAL CAEMRA PLATE FOR
322RC2
MANFROTTO RECTANGULAR QR ADAPTER
322RA
323
$64.95
$69.95
• Camera plate attachment assembly for the 322RC2 can
also be available as a separate accessory in case you
want the camera to be as close as possible to the tripod’s
center of gravity, which provides a higher rate of stability.
www.gentec-intl.com
• Supplied with 1/4” camera fixing screws
• Fixing 1/4” and 3/8” tread
• 200PL rectangular plate included.
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO MACRO BRACKET SUPPORT
MANFROTTO HOT SHOE 2 AXIS BUBBLE LEVEL
330B
337
$104.95
$69.95
• Allows two flash heads to be mounted
with a camera onto a tripod head
• Attachments: 3/8” & 1/4” female threads
& 1/4” camera fixing screw.
• The 337 is a double axis spirit level that mounts to
the hot shoe of any standard 35mm SLR camera
to help you achieve a finer degree of accuracy and
consistency in panoramic photo sequences.
MANFROTTO LEVELLING BASE
MANFROTTO TABLE MOUNT CAMERA SUPPORT
W/234 MONOPOD HEAD
338
355
$209.95
$84.95
• The 338 is fitted between tripod and head and
is used in combination with tripods that don’t
have built-in leveling mechanisms
• Its three adjustment dials enable the operator
to make fine, finger tip adjustments up to +/- 5
degrees to ensure the camera is perfectly level
• The dials also have locking rings to ensure
stability once the right position is reached
www.gentec-intl.com
• This simple table mounting support is supplied
with three holes for fixing or clamping
• Comes complete with the Monopod Tilt Head 234.
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO WALL MOUNT CAMERA SUPPORT
W/234 MONOPOD TILT HEAD
MANFROTTO SLIDING PLATE ADAPTER W/357PLV
PLATE
356
357
$84.95
$89.95
• As for the 355 but designed to be mounted to a wall
• Comes complete with the Monopod Tilt Head 234.
• This Quick Release adapter gives you the freedom to remove
the camera from the head and put it on any other support
• Supplied with two 1/4” and two 3/8” camera screws
• Sliding travel of plate: 80mm.
MANFROTTO LONG LENS SUPPORT
MANFROTTO SHOULDER BRACE FOR MONOPOD
359-1
361
$149.95
$54.95
• This Manfrotto Long Lens Support is a very useful addition
to any photographer’s complement of attachments.
• Complete with Super Clamp 035 and Mini Ball Head 482.
• Fully adjustable between 40cm and 60cm with
a simple telescopic locking device.
www.gentec-intl.com
• Designed to fit to the top end of any make of
Monopod to give additional stability
• Adjustable length with pivoting shoulder support.
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO SET OF 3 LEG WARMERS FOR 055
TRIPOD SERIES
MANFROTTO inDOVE TAILin PLATE ADAPT
380
384
$59.95
$109.95
• Set of 3 Manfrotto Patented Leg Warmers, which have a zip
system so they can be easily fitted and will not slip down in use
• Offers good grip
• Protect the legs and insulate your hands
when using the tripod in cold weather.
• Supplied with 1/4” and 3/8” camera fixing screws
• Fixing 1/4” and 3/8” thread
• 384PL and 384PLARCH plates included.
MANFROTTO inDOVE TAILin PLATE W/1/4 FIXING
SCREW
MANFROTTO inDOVE TAILin ARCHITECTUR PLATE
W/1/4in FIXING SCREW
• Plate with 1/4” screw.
www.gentec-intl.com
384PL-14
384PLARC14
$49.95
$49.95
• Provides alignment for 90° shots with 35mm SLR
camera 384PLARCH-14 with 14’ screw.
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO TABLE CENTERPOST AIR CUSHIONED
MANFROTTO LONG LENS MONOPOD BRACKET
385
393
$109.95
$339.95
• Centre column equipped with a standard 58mm disc and
three grub screws as used on Manfrotto 190 and 055 tripods
• Column can be combined with any head from our range
• The bottom of the column has an 80mm disc which can be
screwed directly to countertop/table or, alternatively, bolted
to the included second disc on the underside of the countertop
• Column diameter: 30mm/26mm. Minimum Height 36cm
Maximum Height 62cm Weight 1.1 kg Load capacity 10 kg
• Specifically developed for use with very
long lenses on Monopods
• Friction base which enables the bracket to pan
on Monopod, also can be used on a tripod
• Two rubber hand grips plus rubber protection to
prevent damage to lens when tilted to maximum
• Variable center height adjustment in three steps.
MANFROTTO QUICK RELEASE PLATE ADAPTER
MANFROTTO DOUBLE ARTICULATING ARM 2-SECTION
W/143BKT CAMERA BRACKET
394
396B-2
$94.95
$179.95
• This Manfrotto 394 low profile Quick Release Plate
Adapter is supplied with 1/4” and 3/8” fixing
screws on both camera and tripod ends.
• Includes 410PL plate.
• Equipped with 2 built-in spirit levels.
www.gentec-intl.com
• Excellent performance: robustness, lightness and versatility
• The 396 family has been developed to provide greater
robustness than the 196 range and to support heavier
loads (upto 5kg), though keeping versatility thanks
to its extendable sliding arm system (extends upto
860mm), further enhanced by its quick lock system
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO ACCESSORY PLATE W/1/4in a 3/8in
FIXING SCREWS
MANFROTTO LONG PLATE W/DOUBLE ATTACHMENT
410PL
430
$39.95
$119.95
• 410PL (RC4 style) supplied with 1/4’’ and 3/8’’ screw.
• Allows two camera mounting positions
• Supplied with 2 x 1/4” and 2 x 3/8” camera fixing screws.
MANFROTTO BALL CAMERA LEVELLER 3/8i
ATTACHMENT
MANFROTTO MICRO POSITIONING SLIDING PLATE
438
454
$139.95
$189.95
• The 438 is fitted between tripod and head and provides easy,
fast leveling for tripods without built-in leveling mechanisms
• Range of movement: 10°
www.gentec-intl.com
• Ideal for macro photography to make precise positioning
movements to achieve the perfect framed shot
• For QTVR and other precise copy/ repro work, the new sliding
plate has finger-tip control for hairs-breadth positioning
but with a simple lock-release lever for fast set-up
• Two plates can be interlocked at 90 degrees for full
lateral/forward/back movement (over 120mm)
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO LEVELING ADAPTER FOR COLUMNS IN
HORIZONTAL POSITION
MANFROTTO LEVELING CENTER COLUMN FOR 055
SERIES
553
555B
$104.95
$229.95
• Working with the centre column in the horizontal
position on Manfrotto tripod models MDEVE tripod
family has always caused a slight difficulty, in that the
head remains at 90° to the ground making it more
difficult to position the camera correctly for shooting
• Our innovative system means you can quickly level your photo
or video head without needing to make time-consuming
adjustments to the length and angle of each single tripod leg
• One of the most common problems in still photography and,
above all, video has been resolved by Manfrotto, thanks to
the use of a 50mm diameter levelling half ball mounted at
the top of a tripod centre column so as to make the angle
of the top plate independent of the rest of the tripod
MANFROTTO LEVELING CENTER COLUMN FOR 190
SERIES
MANFROTTO HEXAGONAL PLATE ADAPTER W/303
PLATE
556B
625
$219.95
$109.95
• Our innovative system means you can quickly level your photo
or video head without needing to make time-consuming
adjustments to the length and angle of each single tripod leg
• One of the most common problems in still photography and,
above all, video has been resolved by Manfrotto, thanks to
the use of a 50mm diameter levelling half ball mounted at
the top of a tripod centre column so as to make the angle
of the top plate independent of the rest of the tripod
www.gentec-intl.com
• Hexagonal plate supplied with 1/4” and
3/8” camera fixing screws
• Fixing 1/4” and 3/8” tread
• 030 hexagonal plate included
• Equipped with 2 built-in spirit levels.
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO BASIC PANORAMIC HEAD ADAPTER
MANFROTTO UNIVERSAL FOLDING BASE FOR 679B
680B 681B
627
678
$89.95
$109.95
• Basic panoramic adapter that can be mounted
on top of a head, monopod, or tripod
• The adapter camera platform has a graduated
scale in millimeters to set the camera position
during different shooting sequences and a dual
1/4” and 3/8” camera fixing screw
• This accessory can be connected to a head, monopod,
or tripod by a 3/8” female attachment.
• This unique accessory allows you to add a base
made of three foldable high strength steel
legs to the Monopods 679, 680, 681
• After using them, the legs can be folded and
stored inside the bottom section of the monopod,
ready in a few seconds when needed.
MANFROTTO QR PLATE FOR MODO/DIGI W/1/4in
FIXING SCREW
MANFROTTO UTLITY TRAY 29X29cm (11 4inX11 4in)
785PL
844
$24.95
$109.95
• Plate supplied with 1/4’’ camera fixing screw.
www.gentec-intl.com
• Optional accessory tray makes it easy to keep
meters and extra film holders at arms length.
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO L BRACKET W/Q2 QR PLATES
MANFROTTO L BRACKET W/Q5 QR PLATES
MS050M4-Q2
MS050M4-Q5
$199.95
$209.95
• The Manfrotto L bracket is a unique accessory designed
for all the professional photographer who would like to
change photo formats in an easy and fast way by quickly
flipping the camera from horizontal to vertical position
• Manfrotto L Bracket combines lightness
with maximum support
• The Manfrotto L bracket is a unique accessory designed
for all the professional photographer who would like to
change photo formats in an easy and fast way by quickly
flipping the camera from horizontal to vertical position
• Manfrotto L Bracket combines lightness with maximum support
• The magnesium structure provides a sturdy
solution in terms of stability, lightweight, and
transportability for all types of equipment
MANFROTTO L BRACKET WITH RC4 QUICK RELEASE
MANFROTTO TOP LOCK QUICK RELEASE ADAPTER
MS050M4-R4
MSQ6
$209.95
$169.95
• The Manfrotto L bracket is a unique accessory designed
for all the professional photographer who would like to
change photo formats in an easy and fast way by quickly
flipping the camera from horizontal to vertical position.
• Manfrotto L Bracket combines lightness with
maximum support. The magnesium structure provides
a sturdy solution in terms of stability, lightweight,
and transportability for all types of equipment.
www.gentec-intl.com
• This adaptor allows you to fit the Manfrotto Q6 Top Lock
quick release system to an existing photo head. The Top
Lock system has been developed to offer photographers
a fast, easy to use and very secure camera quick release
mechanism suitable for heavy pro equipment.
• The camera plate clicks into the clamp from above, and
as soon as it engages, it triggers a safety pin that stops
the plate and camera from sliding out accidentally.
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
MANFROTTO TOPLOCK QUICK RELEASE PLATE
MANFROTTO TWIST GRIP - UNIVERSAL SMARTPHONE
CLAMP
MSQ6PL
MTWISTGRIP
$59.95
$69.95
• Camera attachment plate for use with Manfrotto’s Arcacompatible Q6 Top Lock quick release system, developed to
offer photographers a fast, easy to use and very secure quick
release mechanism suitable for heavy pro camera equipment.
• The plate has a redesigned screw, which can be tightened to
your camera in a number of different ways: by hand, using
the special flip-handle; using a coin, inserted into the wide
slot; or with the supplied allen key for maximum stability.
• TwistGrip is the premium universal smartphone clamp
from Manfrotto, specifically devised for all smartphone
users interested in smartphone photography who
want to increase the potential of their device.
ROUND PLATE WITH 1/4 INCH FIXING SCREW FOR
COMPACT ACTION TRIPOD KIT
RROUND-PL
$19.95
• Rounded camera plate.
• New round quick release system is fast,
adaptable and foolproof.
• Effortless camera attachment by hand.
• Compatible with Compact Action.
www.gentec-intl.com
11/19/2016
All pricing is SRP (Suggested Retail Pricing)
We’re helping retailers become more profitable.
In today’s fast-paced retail environment, the right partner can make a world of difference.
Our commitment to our clients is simple yet powerful – we work closely with them to maximize
the potential of each and every electronic, wireless telecom, photographic imaging, digital
imaging, and optical product they carry.
How do we do this? By taking the time to understand the marketplace in which our customers
operate as well as their existing product mix, by looking for ways to build on their success, by
introducing new opportunities and leading edge products, and by providing after-sales service
that is second to none.
Satisfied customers, improved sales, and increased profit margins.
At Gentec International, we achieve these results by working in partnership with our clients.
We do our homework – we understand the challenges retailers face and what their customers
want. We visit our clients’ stores to get a clear sense of what they carry and how they’re being
presented. Then, we recommend ways that we believe can help increase their sales. This might
include additions to the range of products they carry or fresh approaches to packaging, display,
and promotion. Finally, we ensure that our clients have everything they need to make the sale –
from custom displays to point-of-purchase support. And, throughout the year, we make regular
visits to provide in-store detailing.
Our clients count on us for effortless ordering and error-free fulfillment.
Gentec International’s high cube, state-of-the-art computerized 100,000 square foot warehouse
and distribution centre allows us to offer efficient, seamless service to our customers.
We manage our stock with the goal to eliminate back orders. In fact, based on our clients’
forecasts, we guarantee we’ll have 100% of the items they need in stock, 100% of the time.
Plus, when they place an order with Gentec International, most shipments leave our warehouse
within 24 hours. And we make every effort to ensure that the shipment is accurate – so that
everything they ordered arrives.
At Gentec International, we also make regular investments to ensure that our ability to serve
our clients continually improves.
A reputation for service and a head for business.
The same principles our clients used to build their companies are at work in ours. With
the support of over 100 people in the Gentec family worldwide, our management team
has the depth of experience and breadth of knowledge needed in today’s fast-paced world.
And, we’re constantly evaluating our people, processes, and products to ensure that we are
exceeding our customers’ expectations.
Together we achieve the extraordinary™
www.gentec-intl.com