Assembly Instruction Manual

k1 assembly
instruction manual : How to put together your
KayakPro K1 SpeedStroke Ergometer
safety
precautions
safe operation and use
Serious injury can occur if the following precautions
are not observed.
1. Always consult your physician prior to undertaking any
exercise regimen. A medical exam is advised.
2. Keep head, limbs, fingers, and hair clear of all moving
parts and flywheel cage.
Please note: SpeedStroke requires a working area of:
total width: 175 cm (69”)
total height: 178 cm (70”)
total length + space behind for paddle
shaft recovery: 343 cm (135”)
3. Inspect machine prior to use. Do not use the machine if
it appears damaged or inoperable.
table of contents
KayakPro k-1 ergometer
k-1 overview | parts
k-1 assembly
rope, bungee & paddle
notes for best use
on-board console
002
3-8
9-12
13-15
see seperate manual
4. Contact manufacturer if machine is broken or jammed.
5. Use machine only as intended.
6. Do not modify the machine.
7. Children must not be allowed near this machine.
8. Teenagers must be supervised in the use of this machine.
9. By using SpeedStroke GYM the user accepts all and full
responsibility for self.
001
official supplier of kayak
ergometers to the 2004
Athens and 2008 Beijing
olympic games
front cover:
Ed McKeever | European & World Champion
k1 assembly overview
23
24
25
29
22
26
30
14
31
33
22
32
15
11
32
16
1
17
2
3
4
5
6
19 20
18
11
12
7
8
11
9
6
13
no
1
2
3
4
5
6
7
8
9
10
11
21
33
27
name
fan (1)
m8 x 20 (2)
guide wheel (2)
shaft-43 (2)
shaft-55(2)
m6 x 12 (4)
clutch wheel(2)
m20 washer (6)
lock ring (4)
rear feet (1)
m8 x 16 (8)
no
12
13
14
15
16
17
18
19
20
21
22
28
name
front stand (1)
front feet (1)
kp1 shaft (1)
console (1)
m8 x 80 (1)
m8 washer (2)
front frame (1)
m8 nut bn (1)
m8 nut n (2)
m6 nut bn (2)
m8 x 120 (3)
10
no
23
24
25
26
27
28
29
30
31
32
33
name
m8 x 20 (2)
footrest (1)
m6 x 16 (8)
m8 nut snc (1)
rear frame (1)
sprit (1)
seat (1)
m6 x 20 (4)
rear stand (2)
m8 x 35 (2)
adjust-belt (1)
step 1 & 2 k1 assembly
1
2
M8 x 16
M8 x 16
www.kayakpro.com
k1 assembly step 3 & 4
M8 x 120
3
washer M8
4
nut M8
M8 x 12
004
step 5 k1 assembly
M8 x 35
nut M8
M8 x 35
005 www.kayakpro.com
k1 assembly step 6
M8 x 16
i
006
step 7 k1 assembly
M8 x 20
M8 x 120
M6 x 16
M6 x 20
nut M8
007 www.kayakpro.com
nut2 M6
k1 assembly step 8
M8 x 20
M8 x 80
M8 washer
nut M8
washer M8
008
what you will need before beginning
2 sets of ropes (the other 2 ropes in the package are spares- as is the additional bungee)
3 pieces of the paddle shaft
The smallest Allen wrench in the set provided.
rope bungee paddle shaft configuration
Please ensure that during transit the bungee cord
on this central roller is still located on the roller
wheel here and has not slipped onto the axle.
(see image above)
The following instructions from this point forward,
assume the internal bungee arrangement is in place
within the body of the SpeedStroke at arrival. If this
is not the case, please do not hesitate to contact us
in order to assist you further.
www.kayakpro.com
pre-instruction
Once the main structure of the SpeedStroke is
assembled, it should remain “upright.” Do not
place the machine on its side or upside down
during final assembly.
rope bungee paddle
instructions steps 1 & 2
Step 1: On one side of the SpeedStroke, run the bungee cord
around the roller on the back of the machine, under the seat. It
should go from the top of the roller to the bottom. (See image.)
PLEASE NOTE: You may need to remove the aluminum antitwist connector from the bungee, to install the rope / bungee
system. Run bungee around rear roller (again, from top to bottom), and then reattach anti-twist unit by tightening recessed
screw fully. (See image.) The anti twist connector has different
recessed screws for the rope and for the bungee end- If one
screw is found to be protruding please rotate the Anti-twist
connector and re-attach.
Step 2: Repeat on the other side.
bungee
rope
010
steps 3 - 6
rope bungee paddle
to the end of the paddle shaft
from rear of speedstroke
Step 3: On one side of the SpeedStroke, attach the
rope to the anti-twist unit. Use the smallest Allen
wrench provided to tighten the screw fully around the
rope. When you are done, the rope should be attached
to the bungee by the antitwist connector.
(As seen on page 10.)
Step 4: Repeat on the other side.
Step 5: On one side of the SpeedStroke, run the rope
around the rollers at the front of the machine, near
the Flywheel. Do this as pictured in the image below.
The rope travels around the bottom of the silver front
catch roller, exits the top of that roller, and then
(under) the bottom of the black guide roller. The rope
should exit toward the back of the machine (where the
seat is). You will leave it on the floor for now.
Step 6: Repeat on the other side.
011 www.kayakpro.com
Step 7: You will now assemble the paddle shaft (3
pieces). The piece without the ferrule installs in the
middle. The other two pieces install on the outside
with the screw pointed outward. For now, place the
paddle shaft in its narrowest position, so it is as short
as possible.
steps 7 - 11
rope bungee paddle
you can adjust the length of the rope here
Step 8: Unscrew the tip (insert) of the shaft on one
side and remove the insert. Run the rope on that side
through the hole in the insert. Tie a knot on the rope
on the “inside” of the tip, leaving about 10 cm of loose
rope for placement inside the shaft. (It does not have
to be exactly 10 cm, but you should measure from the
knot to the end - you will need to match this on the
other side.) The screw should now be attached to the
front side of the shaft.
Step 9: Repeat on the other side.
Step 10: Once the paddle shaft is attached on both
sides, use the two ferrules to adjust the length of the
shaft to your own personal preference. Make sure the
distance from the ferrules to the end of the shaft is
uniform on both sides. Adjusting the length of the
shaft will alter the paddling resistance; the longer the
shaft, the greater the resistance, the shorter the shaft,
the less the resistance.
Step 11: The shaft-length adjustment will also allow
you to customize SpeedStroke to replicate precisely
the paddling “feel” of your own boat.
012
notes for best use
paddle shaft
The shaft length and the Set-able resistance lever on the
flywheel should be set in balance with one another in order
to provide the resistance level that best mimics your boat
and paddle set-up.
As an approximate guide, a SpeedStroke shaft length of
approx: 170 cm- (67 Inches) should equate to approx 219220 cm paddle length, with a medium size blade area.
Do not extend the paddle shaft length over the “Max”
length marks.
When extending the paddle shaft length it is very important
that the shaft length is adjusted equally,( in relation to the
shaft insert piece) – if this is not done – bending of the shaft
[for which we cannot be responsible] may occur.
013 www.kayakpro.com
notes for best use
ultra high frequency stroke rates
When short or intense efforts are being done on SpeedStroke
GYM, usually over 125 strokes per minute (spm), and up to
180 spm, as would be typical on a 200m workout- we restrict
the continuous rope action, in order to be able to achieve the
higher stroke rate needed.
SpeedStroke’s action is made better by the “continuous
rope” system that is in place on your Ergometer, this thereby
allows a more “real” paddling action. This continuous rope
system allows better end-of-stroke recovery, and greater
freedom to rotate whilst paddling.
When paddling at an Ultra high frequency- At a stroke rate
above approx. 125 spm the rope in its continuous rope configuration will not allow recovery sufficiently quickly to allow
you to paddle at a higher frequency.
However- by the addition of a simple bungee clip system
(which attaches to the underside of the SpeedStroke GYM
bungees). See image right- This High Frequency adjuster will
allow you to paddle at frequencies of up to 180 strokes
per minute.
notes for best use
tension adjuster
Another mechanism in order to
ensure maximum connectivity of
the paddling action is the rope
tension adjuster, located under the
Ergometer (see image).
Simply pull the rope and clamp
toggle downward to increase the
rope tension and in reverse simply
release the rope clamp toggle to
reduce the rope tension.
Again the rope tension preferences
should be adjusted in balance and
harmony with the ability to shorten
the total rope length in the [shaft
rope] figure see page 012.
015 www.kayakpro.com
direction of movement
of tensioner
pull rope downward
to increase the tension
on the tension roller
avaliable
software
to enhance SpeedStroke GYM preformance
iRaceExpress >>>
iRaceExpress is KayakPro’s Interactive; real-time
Regatta course format based interactive software.
iRaceExpress allows one or Multiple SpeedStroke
Ergometers to be connected together on a custom
settable interactive regatta course. iRaceExpress
allows you to train individually with live partners or you have the option to set up to 12 other virtual
pace paddlers to accompany you and your paddling
partners. The iRaceExpress software also allows
you to set variable split and pace times for
the pace paddlers.
eMonitorPro2 >>>
eMonitorPro2 is the leading analytical scientific
and evaluation software, able to record your
training data from your SpeedStroke GYM
Ergometer. It is able to display in graphic or
numeric formats, isolating individual parameters
to display/analyze and even overlay to
compare them.
KayakPro software can be found at:
www.kayakpro.com/speedstrokegym/software.php
try our other products
check out more at:
www.skifastergo.com
SkiFast Ergometer brings the undoubted fitness and health benefits of outdoor
XC skiing, inside - available at any time.
VirtuaRace software
KayakPro has developed with our partners FitCentric Technologies, Inc. VirtuaRace – software for virtual fitness and fitness data
management.
FitCentric NetAthlon immerses you in your workout world and
challenges you with online training and racing (Web Racing®)
bringing the excitement of real-time head-to-head or group racing
to homes, fitness clubs, on a global scope; Connecting trainers,
racers, and fitness enthusiasts together is our goal.
Imagine training with your friends from any location world-wide
on the same course, with head to head racing.
KayakPro USA LLC
6538 Collins Ave Suite 306
Miami Beach, FL 33141
For a full list of international dealers go to:
www.kayakpro.com/speedstrokegym/dealers.php
contact us | www.kayakpro.com | +1 914 740 5055 | sales@kayakpro.com
Offical suppliers of kayak egrometers to the
2004 Athens & 2008 Beijing Olympic games.
GYM