thedetectionspecialis ts

Transcription

THE DETECTION SPECIALISTS
We are the Australian distributor of the "well
known" USA manufacturer,
White's Electronics, which have been
manufacting treasure hunting and
prospecting detectors since 1950.
Today White's Electronics remain at the
forefront of new and innovative designs and
provide real value for money to everyone
from the beginner to the professional
prospector and treasure hunter.
We offer a larger range of advanced
prospecting and treasure hunting detectors,
full range of accessories, including popular
searchcoil brands like "Nugget Finder" and
"Coiltek".
Our Aim is to provide every achievable
service to our customers from
the serious professional right down to novice
beginners.
The best products, the best friendly advice,
the best goldfields in the world, everything
you could want!
Catalogue designed for Gold Search Australia
by Dean Mortimer © 2011 - 2015
INDEX
Choosing the right detector
White's Metal Detectors
TDI PRO Oz-Series
Sierra Pulse Pro (SPP)
GMT Goldmaster
MXT All Pro
Spectra V3i
Sierra Gold Trac (SGT)
Sierra Super Trac (SST)
Surf master P.I
Coinmaster GT
Coinmaster Pro
Coinmaster
MX5
TRX Pinpointer
Comparison Chart
Search Coils / Skidplates
White's
Nugget Finder
Coiltek
Accessories
............................................................
2
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
............................................................
3
4
5
6
7
8
8
9
9
10
10
11
11
12 & 13
............................................................
............................................................
............................................................
14
15
16
Control-box Cover Detector Case
17
Pick
Holder Rain Hat Harness Carry Bag
....................................................................
Power Cable Battery Holder Battery
18
Car
/ Wall Charger
....................................................................
Gold
Pan Sieves Suction Bottle
19
....................................................................
Concentrator Sluice Hand Dredge
20
AU
Trap
Panners
Mate
Display
Cases
....................................................................
Pick Sand Scoop Lesche Trowel
21
Shovel
Coin
Probe
....................................................................
Gold Maps / Books
Customer Stories
Back Page
Head Phones External Speaker
22
Lower Stems Divers Rod
....................................................................
LCD Decals Arm Strap Arm Pads
23
Velcro Strips O-Ring Black Tape
....................................................................
Control Stand Magnets Arm Cup
24
Cable
Guard Hip Stick Nut / Bolt / Washers
....................................................................
White's
Educational Books
25
....................................................................
John
Tully Maps
26
....................................................................
Doug Stone Maps
27
Stephen
Barnham Books
....................................................................
Whites
Manuals
28
....................................................................
Forgotten Gold Story
29
....................................................................
MXT'ing
for Gold
30
....................................................................
Field
Testing the White's TDI Pro
32
....................................................................
Metal Detector Hire Information
Australian Authorised Whites Agents
North VIC Engines (Diesel + Petrol Engines)
Prospectors Accommodation
1
The right detector, a brief guide
for people who are new to detecting
At Gold Search Australia we stock a good selection of detectors to cover a variety of different
uses. To get the best results it is important to buy the right detector to suit the job.
Detectors are broadly divided into 2 types, the first being VLF (Very Low Frequency) detectors
which White's have made since the early 1950's and the second being Pulse Induction which
have been around from the mid 1990's. Both have their pros and cons.
VLF Detectors
Pros (Thumbs Up)
- The Vast majority of VLF detectors have a display screen that provides information about the
target in the ground, this information is used to judge if the target is worth digging or not.
- VLF's have the ability to discriminate against ferrous objects and the better models can be set
up to ignore or accept a selected range of the targets, with a helpful variation in audio tone.
- Some high frequency VLF detectors will detect fine gold that is invisible to Pulse Induction
machines.
- VLF's are comparatively cheap and light in weight.
Cons (Thumbs Down)
- VLFs can often struggle to detect targets in highly mineralised ground, it can make them noisy
and reduce their detection depth.
- There is a limited number of search coils available for most VLF detectors.
Pulse Induction
Pros (Thumbs Up)
- Pulse Induction detectors also known as P.I detectors, can penetrate deeper into mineralised
grounds where gold is often found.
- There is a huge range of search coils available which could increase the amount of gold found.
Cons (thumbs Down)
- No display screen for information, only audio, so all targets should be dug.
- Discrimination on some brands is not reliable.
- P.I detectors prefer solid targets, very fine disseminated gold can be invisible to them
- They are more expensive, heavier and can be susceptible to electrical interference (EMI)
Suggestions
White's MXT PRO - 3 in 1 Detector: for travellers who seek a variety of detecting opportunities,
coins and relic hunting on beach or land and the ability to prospect for gold in areas where
mineralisation is not as heavy.
White's GMT Goldmaster: For chasing fine alluvial or small gold in reefs, riverbeds and
pipeclay, with the ability to ignore ferrous targets, can locate small gold that Pulse Induction
detectors can miss.
White's TDI Pro Oz-Series: A dedicated gold hunters detector, to run well on mineralised
beaches and in heavy mineralised grounds throughout the goldfields.
White's Sierra Pulse Pro: Handles areas that produce EMI (Electrical Magnetic Interference)
and runs smoother in mineralised grounds throughout the goldfields.
2
TDI PRO
OZ-SERIES
Finding gold was just the beginning! TDI was origionally designed for prospecting;
now optimized for exceptional preformance for relic, beach, even coin hunting.
Professional-level ground balancing, pulse induction detection. Unlike
any other metal detector on the market today, the TDI is capable of
remarkable depth and extreme sensitivity in the mineralised grounds.
TDI Pro Oz-series Harness
Hip / chest mountable
Carry less weight
Detect longer
(Sold seprately)
Item# TDI01
FEATURES
Fine-tune Ground Balance Controls Coarse and fine tuners
precisely balance out the iron mineralisation of hot rocks, black
sand and other tough ground conditions.
Pulse Delay control labled for best preformance settings for
small gold, wet salt and large targets.
3-Way Target Conductivity Selector allows variable audio to
hear low / high conductive targets, or both.
Volume Control Get extra sensitivity for tiny targets and still
keep volume at a comfortable level.
Hip and chest-mountable!
Frequency Control adjusts for hunting
near power lines, microwave or other
enviromental interference.
Battery Life L.E.D light.
Waterproof 12" Spider Search coil.
One 14.4v 6.8Ah (98Wh) Lithium-Ion
Rechargeable Battery.
Two Year Transferable Warranty.
Field Testing the
New white's TDI Pro
Oz-Series Story
See Page 32
3
SIERRA
PULSE PRO
Advance Quieting Technology
Specifically designed to run smoother in
HIGH Electrical Interference areas
FEATURES
Item# SPP01
4 Controls
- Threshold: Hear targets easier in the ground
- Frequency: Eliminate Electrical Interferences like powerlines,
radio towers and other detector operators.
- PWR / Gain: Switch the SPP metal detector ON / OFF
Increase Gain for better depth penetraition
- Ground Balance: operate with full ground balance capability,
can also operate without ground balance when ground
minerals are low for increased depth.
Fixed 2 Tone Conductivity
Hear all targets with either high pitch sound (low conductive) or
low pitch sound (high conductive) thus, the Sierra Super Pulse
will hear all GOLD whatever it's conductivity.
Multiple Search Coils
Supplied with, 12" Mono Aussie coil for larger deeper targets
Optional Nugget Finder and Coiltek coils available
(sold seperately)
Battery
L.E.D Battery Indicator
Includes NiMH Battery and Charger and a, slide in 8xAA
Battery Holder (8 Dry Cell Batteries Included)
Two Year Transferable Warranty
4
GMT
GOLDMASTER
48 kHz gold-power, proven ground tracking, tiny target detection,
complete ground control, finds nuggets; large and small, plus coin's too!
Used in gold fields around the world.
GMT® ignores the harsh ground found
in gold bearing areas to simplify gold
prospecting.
FEATURES
Item# GMT01
Auto Ground Balance with fast auto trac®
Tracks and adjusts while you hunt.
Grab Push pad: Sets ground balance in an instant
“FOLLOW-THE-PAYSTREAK” Displays the amount of
magnetic minerals in the ground.
Iron Target Analyzer: Determines the probability of iron as
you sweep.
Iron ID Bar Graph: Displays the percentage probability of
iron in the detected target.
48 Khz Operating Frequency, Best for gold!
Optional ID Audio Iron ID “GRUNT” Comes at the end of
the GMT’s “zip-zip” sound.
Variable Self-Adjusting Threshold (VSAT)
Waterproof 6x10” Search Coil.
“AA” Drop-In Battery System. 40 hrs. of hunting.
(Optional Nicad Rechargeable System.)
GMT Forgotten Gold Story
34 Ounces of Gold Found
see page 29
to
Simple to use!
Just set each control
and your ready to hunt.
5
MXT ALL PRO
MXT ALL PRO combines popular new features with legendary MXT performance.
An all-new keypad ... plus Tone I.D., Ground Grab, backlight, and more!
The versatility of 3 completely
separate hunting programs,
with the added deep detection
of White’s proven 10” DD
search coil.
MXT ALL PRO is sure to be a
new favorite for the weekend
prospector, coinshooter, and
the relic hunter.
FEATURES
Item# MXT-AP
Backlit Display: High-efficiency backlit display for hunting
in low light conditions.
Tone ID: Seven tones in the Coin & Jewelry Program. I.D.
different targets before you dig.
Ground Grab: A convenient way to update ground tracking
from a locked setting. Or, from a tracking setting, temporarily
lock tracking for multiple passes over questionable signals.
3 separate programs: Unique target responses, display info,
and audio frequencies.
MXT'ing
For Gold Story
See Page 30
Relic: Specifically ID’s buttons, buckles and bullets. The
display offers VDI range of -95 to +95, target blocks, relic
target labels, battery check, overload alert and depth reading.
Prospecting: Iron Grunt for targets with high probability of
being iron. Display offers VDI range of -95 to +95, %
probability of IRON, ground phase, battery check and overload alert.
Coin/Jewelry: Display offers VDI -95 to +95, Target Blocks,
Coin/Jewelry/Trash-target labels, battery check, overload
alert, depth reading and Tone I.D.
3 easy-adjust controls:
GAIN maximizes sensitivity and depth.
THRESHOLD allows you to hunt with a slight hum or hear
only the sound of detected targets.
DUAL control functions differently in each program.
Automatic Ground Balance: Simple, fast, and accurate.
Operating frequency: 15 kHz
Drop-in Battery Pack: 40-hour operation from 8 “AA”
batteries. (Optional Nicad or NiMH Rechargeable systems
available, sold separately.)
10” DD Waterproof Spider Search Coil
9
6
Backlit display for hunting in low light.
See what you’ve detected ...
Easy navigation menu...
just pick a program and go!
Identify targets before you
dig! Seven audio tones in
the Coin & Jewelry program
Then pull the trigger
and see how deep to dig!
SPECTRA V3i
V3i takes treasure hunting to a whole new level of performance and depth.
V3i is equipped with plenty of new treasure-finding features including wireless headphones, HD color
display, and an array of languages just to name a few. These are sure to make your hunting more fun than
ever. But the true measure of a better metal detector? “Does it go deeper? What are you finding?”
The answer: V3i users are digging older, deeper coins, relics and jewelry. In places hunted time after time
with other top-of-the-line metal detectors!
Custom-built wireless
headphones “sync”
with Spectra V3i in
just a couple of steps!
- Sold separately.
9 Pro Designed
Turn on and go! Programs
FEATURES
Item# SPC01
On-board Quick Reference Guide
Search Coil Selection More accurate depth measurements
when using accessory coils.
HD Full-Color Display
3 x 3 Target I.D. System™
9 New Turn-on-and-Go Hunting Programs
3 Optimized Hunting Frequencies
Live Controls for Real-Time Adjustments
10” DD Waterproof Search Coil
Selectable Ground Filters
Adjustable Recovery Delay
Dozens of Expert Menu Options
NiMH Rechargeable Battery System
Adjustable Backlight
Owner Registration (Software Embedded)
Languages: Spanish, French, German, Russian, Turkish,
and English.
Wireless SpectraSound® Headphones (optional)
The Search screen's Spectra Graph™ displays
each of the 3 frequencies; 2.5 kHz, 7.5 kHz and
22.5 kHz. Detect a target and analyze shows
target size and characteristics at each frequency.
See it all in HD Color! Icons, Spectra Graph
target signature, and depth.
7
SIERRA
GOLD TRAC (SGT)
I am very impressed with this detector and
would recommend it to anyone hunting for
fine alluvial gold in clay laden gravel.
~ Adam, NSW
FEATURES
48 kHz Frequency
Item# SGT01
All metal Operation: Hear all metal targets.
Simple Operation: 2 Controls, Power on /
Gain & Audio Threshold.
Light weight: The SGT is light weight and well
balanced for all-day hunting.
Waterproof elliptical "DD" 6x10 inch search
coil. (optional coils available)
"8x AA" Battery System
Can be used with any Goldmaster Series
(48 kHz - 50 kHz) coils.
SIERRA
SUPER TRAC (SST)
The SST is mounted with the popular 6 by 10 inch
Eclipse Oval Search Coil for extra ground mineral
control and target separation.
FEATURES
Item# SST01
Fast Auto Trac®
Tracks and adjusts while you hunt.
14 kHz Frequency
3 Simple Controls High performance GAIN
Maximizes sensitivity and depth.
Visual Display Operates in an All Metal /
Silent Search mode with Audio and Visual
Discrimination Indicator.
Depth Reading Detect a target, the screen
shows you how deep to dig!
1/4 inch headphone jack
Waterproof 6x10" inch Eclipse Search Coil
8
There is no learning curve, you
will be finding at once.
~ Jimmy Sierra
SURF
MASTER P.I
3 Easy Controls
PULSE DELAY reduces black
sand noise. Quieter on the beach,
more targets! Sensitive to targets
even at maximum depths.
GAIN adjusts for beach conditions to get every
inch of PI depth.
FEATURES
Item# SRF01
Pulse Induction detection for extreme depth on
coins and jewelry, especially in saltwater and
mineralized ground.
Completely waterproof to depth of 100 feet
Adjustable Pulse Delay reduces black sand noise.
12" dual field spider search coil.
Near-neutral buoyancy.
Gain control adjusts for your particular beach
conditions so you get every inch of PI depth.
Sensitive to gold even at maximum depths.
Auto. Ground Rejection
Quick Target Recovery
Power: 8 “AA” batteries
TUNER adjusts threshold tone
and checks battery.
COIN MASTER GT
The Coinmaster GT combines
high end features like Beach
Mode, Auto Ground Balance
and VDI numbers with legendary
Coinmaster simplicity!
Identify targets before you dig!
Seven audio tones
Item# CM03
FEATURES
Visual Discrimination Indication (VDI) Number
readout provides precise target information
Adjustable Notch Discrimination 9 notches cover the
full target range
Smart Notch You choose to detect or ignore nails, foil,
tabs
Depth Reading: Detect a target, the screen shows you
how deep to dig.
5-Range Discrimination
VCO Pinpointing / All-Metal Mode
Adjustable Sensitivity and Beach Mode
Backlit Display with Target I.D.
Waterproof 9" inch Spider Search Coil
Long-Life, "AA" Battery Pack Included
Target I.D., tracking ground
balance, 1/4" headphone
jack and slide in power
pack, at a great price!
9
COIN MASTER
PRO
FEATURES
Item# CM02
Target I.D. Display shows I.D. of target as you
hunt. Hear and see targets!
Tone I.D. LOW tone signals nails and iron. MED
is rings & jewelry. HIGH indicates coins.
Smart Notch: You choose to detect or ignore
nails, foil, tabs
Depth Reading: Detect a target, the screen
shows you how deep to dig.
5-Range Discrimination
Adjustable Sensitivity
Pinpoint / All-Metal Mode
Powered by 2 x "9 volt" batteries (Included)
1/4" headphone jack
COIN MASTER
FEATURES
Item# CM01
Target I.D. Display shows I.D. of target as you
hunt. Hear and see targets!
5-Range Discrimination Adjusts so you pick
what you want to see and hear.
Depth Reading: Detect a target, the screen
shows you how deep to dig.
Adjustable Sensitivity maximizes depth in
varying grounds.
Pinpoint / All-Metal Mode Makes locating your
target a snap. Just push the pad!
Powered by 2 x "9 volt" batteries (Included)
1/4" headphone jack
10
MX5
The MX5 is a versatile detector that can be
used on the beaches and in parks.
FEATURES
Item# MX5
Frequency 14 KHz VLF
All Metal Audio Selectable VCO / Non VCO
Programs Beach Mode & Coin / Jewelry Mode
Search Modes Disc / Beach / All Metal
Adjustable Notch Discrimination
Automatic Ground Balance with AutoTrac®
Search Audio Threshold with selectable Tone ID
Depth Reading & Backlit Display
Batteries 8 "AA" 20h approximately
Stand-by mode for quiet target recovery
Waterproof 9" Spider Concentric Coil
Optional Coils available Eclipse Family
Lighweight (1.76 Kgs)
1/4" headphone jack
Two year Transferable Warranty
WHITES BULLSEYE TRX
Reliable and loaded with practical hunting features you've been waiting for!
Locate valuable coins, rings, jewelry, gold and relics!
Use the Bullseye TRX Pinpointer to precisely "pinpoint" the target. No tuning. Completely automatic.
FEATURES
Item# BSYE4
Automatic Ground Balance with Tracking
Target Ratcheting
Audio and / or Vibrate Alert
Rugged, Weatherproof Design
Lost pinpointer Alarm
Automatic Power Off
Overload Indicator
LED Light
Holster (up to 3" belt)
Replaceable Shell
Ruler with convenient inch markings.
Dual Battery Operation
2 x AA Batteries or 1 x 9 Volt Battery.
Weight 6.5 ounces
Overall Length 10 inches
Two Year Warranty
Holster & Lanyard
Attachment Loop on TRX
11
WHITE'S DETECTOR COMPARISON CHART
TDI Pro OZ
SSP
Display
GMT
SGT
Surfmaster
Mono
Operating Frequency
Pulse
Pulse
Pulse
48 kHz
48 kHz
Pulse
Filters
Pulse
Search coil size (Inches)
Interchangable Search coil
12"
YES
12"
YES
YES
YES
2
6 x 10"
YES
YES
Pulse
12"
Fixed
All metal Mode
Present Programs
Custom Program Library
4
6 x 10"
YES
YES
Pinpoint Mode
Auto Ground Balance
Depth Readout
Audio Discrimination
Adjustable Discrimination
Notch Discrimination
Frequency Adjust
Adjustable Ground Balance
Adjustable Threshold
Adjustable Sensitivity
Adjustable Length
Tone I.D.
Visual Traget Readout
3x3 Target ID with Analyze
Coin Hunting
Jewelry & Beach
Scuba & Underwater
Relic Hunting
Prospecting for Gold
Headphone Jack
Wireless Headphones
Auto Memory
Stanard Battery
Rechargeable Battery
Battery Life (Approx Hours)
Weight with batteries
On-board Registration
Anti-EMI Technology
YES
YES
YES
YES
Special
YES
YES
YES
Special
YES
Special
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Fixed
Li-Ion
Li-Ion
10 - 12
2.60 Kgs
8 x AA
NiMH
5-6
1.55 Kgs
8 x AA
Optional
30 - 40
1.75 Kgs
8 x AA
Optional
30 - 40
1.60 Kgs
8 x AA
Optional
15 - 20
1.60 Kgs
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
WHITE'S HANDHELD EQUIPMENT
DX Invader (DX-1)
Accurate “Bullseye” pinpointing on coin size targets up to 2”+ deep depending on
detector settings, search coil size and ground conditions! Toggle switch shuts off coil as
it turns probe on and vise versa. DX-1 is Light weight, waterproof submersible. Probe
mounts on top of upper shaft and weigh approx 280 grams total!
For use with White’s MXT / MXT PRO / V3i / VX3 and DFX metal detectors.
Item# INVDX1
12
WHITE'S DETECTOR COMPARISON CHART
SPECTRA V3i
MXT ALL Pro
MX5
SST
Coin GT
Full Colour
Backlit LCD
Backlit LCD
Mono
Mono
Mono
Mono
2.5, 7.5, 22.5 KHZ
14 KHZ
14 KHZ
14 KHZ
8 KHZ
8 KHZ
8 KHZ
1 To 8
10"
YES
3
12"
YES
9"
YES
6 x 10"
YES
3
9"
YES
2
9"
YES
2
9"
YES
YES
YES
YES
YES
YES
YES
YES
9
25+
YES
3
2
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Auto
Optional
YES
Pre-Set
Optional
YES
Pre-Set
Optional
YES
YES
YES
9-Tone
YES
Coin Pro Coinmaster
YES
YES
YES
YES
YES
YES
YES
Auto
YES
YES
YES
YES
YES
YES
YES
3 - Tone
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
8 x AA
Optional
25 - 30
2.10 Kgs
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
8 x AA
NiMH
10 - 12
2.40 Kgs
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
8 x AA
Optional
10 - 20
1.80Kgs
8 x AA
Optional
25 - 30
1.80 Kgs
8 x AA
Optional
10 - 20
1.60 Kgs
2 x 9 Volt
Optional
10 - 20
1.20 Kgs
2 x 9 Volt
Optional
10 - 20
1.20 Kgs
WHITE'S HANDHELD EQUIPMENT
White's PCL - 600
A time saving tool for utility work. Just turn on the PCL-600 and fined exactly where the pipes
are running. Traces residential and commercial gas lines, water and sewer pipes and
electrical cabling within access or service depths.
Item# PCL600
White's Spectra Scan Handheld Metal Detector
Designed for the rigorous requirements of security enviroments including
airports, correctional facilities, schools, concerts, sporting events, and public and private
buildings. Item# SPC05
13
WHITES SEARCH COIL RANGE
ALL WHITES SEARCH COILS ARE WATERPROOF
SPECTRA V3i / VX3 / MXT ALL PRO / DFX / SST / MX5
6 x 4" Eclipse
5.3" Eclipse Round
14 x 8" DeepScan
950 / 9.5" Round
Finds the good stuff
in areas heavily
littered with trash. .
Item# ECL04
Excellent speed
hunting loop with
quick and accurate
audio discrimination.
Item# ECL05
Provides better
separation between
targets in high trash
areas.
Item# ECL02
10" DD Round
Built for target response
and enhanced ground
coverage.Item# ECL07
Concentric Coil,
Arguably best all
around general
purpose
Item# ECL01
Specialised to punch
deeper in difficult
mineralised grounds.
Item# ECL03
12" Round
Ideal for soils with
predominately high
magnetic susceptibility
Item# ECL06
GMT / GOLDMASTER 2 / 3 / 4 / VSAT / 4B / SGT
6 x 4" Goldmaster
DD Shooter search coil
50 kHz best for hunting
small tiny nuggets.
Item# GMT03
6 x 10" Eclipse
6 x 10" Goldmaster
14 x 8" GoldMax
20% plus increase in
detection depth on
medium to large
nuggets.
Item# GMT04
Provides superior
performance in extreme
conditions.
Item# GMT02
COINMASTER / COIN PRO / COIN GT / PRIZM SERIES
6 x 4" Prizm Mini
9" Spider Round
Provides excellent trash
rejection while maintaining
good detection depth on small
targets. Item# CM05
Open spider design. Epoxy filled,
less buoyant, reduced sweep
resistance. Item# CM04
TDI PRO OZ-SERIES / SPP / SL
Ideal for soils with predominately
high magnetic viscosity (slow signal
decay rates) typical of Australia.
Jimmy TDI Folded
9 x 5 ½" folded mono coil for
quieter detection in mineralised
soils. Pin-point easier with it's
elliptical shape!
Item# JIM01
Jimmy Sierra Digger TDI Mono
14 x 8" Single field Mono.
more depth than the Jimmy Folded
coil and more coverage.
Item# JIM02
12" MONO Aussie Item# WMA01
7.5" MONO Aussie Item# WMA02
SKID PLATES
Search coil cover / skid plates
are also available for All Whites
Search Coils. Item# SKP0
For use with Early 1980 Models
Target separation & enhanced depth on
small metal targets. Use with White's
models: XLT, 6000XL, QXT, IDX, ID,
CL III, and 5900.
5.3 Bullseye 6.59kHz Item# BSYE3
14
6x4 Bluemax 6.59kHz Item# BLU01
NUGGET FINDER ADVANTAGE MONO COILS
ALL NUGGET FINDER SEARCH COILS ARE BUILT WITH LITZWIRE!
COME WITH A FULL 3-YEAR WARRANTY
AND FITTED WITH CABLE CLIPS, CAP PLUG, COIL BOLT & PROTECTIVE SKID PLATE!
12" Round Spoked
12" Round Solid
14" Round Spoked
Weight: 700g
Size - 30 cm
Item# NF12R-SP
Weight: 770g
Size - 30 cm
Item# NF12R-SO
Weight: 750g
Size - 36 cm
Item# NF14R-SP
14" Round Solid
Weight: 920g
Size - 36 cm
Item# NF14R-SO
16" Round Spoked
Weight: 800g
Size - 40 cm
Item# NF16R-SP
16" Round Solid
Weight: 1080g
Size - 40 cm
Item# NF16R-SO
18" Round Spoked
18" Round Solid
20" Round Spoked
Weight: 860g
Size - 45 cm
Item# NF18R-SP
Weight: 1230g
Size - 45 cm
Item# NF18R-SO
Weight: 940g
Size - 51 cm
Item# NF20R-SP
25" Round Spoked
Weight: 1060g
Size - 63 cm
Item# NF25R-SP
8x6" Elliptical Solid
Weight: 470g
Size - 20 cm x 15 cm
Item# NF86-SO
Weight: 640g
Item# NF127-SO
14x9" Elliptical Spoked
Weight: 690g
Item# NF147-SO
Weight: 680g
Item# NF149-SP
Weight: 750g
Item# NF149-SO
Weight: 750g
Item# NF17E-SP
Weight: 920g
Item# NF17E-SO
Weight: 920g
Item# NF30P-SP
Weight: 850g
Size - 61 cm x 30cm
Item# NF24E-SP
Weight: 1140g
Size - 61 cm x 30cm
Item# NF24E-SO
Weight: 1040g
Item# NF30P-SO
15
NUGGET FINDER ADVANTAGE SKID PLATES
12" Spoked
Weight: 68g
12" Solid HD
Weight: 184g
12" Spoked HD
Weight: 146g
12" Solid
Weight: 102g
14" Spoked
Weight: 81g
14" Solid
Weight: 128g
14" Solid HD
Weight: 245g
14" Spoked HD
Weight: 155g
18" Spoked
Weight: 114g
18" Solid
Weight: 206g
Item# NF12K-SP
Item# NF14K-SP
16" Spoked
Weight: 109g
Item# NF16K-SP
Item# NF12H-SO
Item# NF14K-SO
16" Solid
Weight: 174g
Item# NF16K-SO
20" Spoked
Weight: 142g
Item# NF86K-SO
12x7 Old Style
Weight: 54g
Item# NF127-OS
14x9 Spoked HD
Weight: 126g
Item# NF149H-SP
8x6 Solid HD
Weight: 67g
Item# NF86H-SO
14x7 Solid
Weight: 54g
Item# NF147K-SO
14x9 Solid
Weight: 91g
Item# NF149K-SO
17x11 Spoked HD
Weight: 163g
17x11 Spoked
Weight: 78g
24x12 Solid
Weight: 202g
24x12 Spoked
Weight: 107g
Item# NF17H-SP
Item# NF24K-SO
Item# NF17K-SP
Item# NF24K-SP
Item# NF12K-SO
Item# NF14H-SO
Item# NF14H-SP
Item# NF18K-SP
20" Solid
Weight: 262g
Item# NF20K-SO
Item# NF20K-SP
8x6 Solid
Weight: 34g
Item# NF12H-SP
Item# NF18K-SO
25" Spoked
Weight: 142g
Item# NF25K-SP
12x7 Solid
Weight: 50g
Item# NF127K-SO
14x7 Solid HD
Weight: 128g
Item# NF147H-SO
14x9 Solid HD
Weight: 162g
Item# NF149H-SO
17x11 Solid
Weight: 119g
Item# NF17K-SO
30x7 Spoked
Weight: 100g
Item# NF30K-SP
12x7 Solid HD
Weight: 107g
Item# NF127H-SO
14x9 Spoked
Weight: 54g
Item# NF149K-SP
14x9 Old Style
Weight: 66g
Item# NF149-OS
17x11 Solid HD
Weight: 240g
Item# NF17H-SO
30x7 Solid
Weight: 124g
Item# NF30K-SO
COILTEK COILS
6" Sniffer
Weight: 417g
Item# CT6GS
16
10.5 Joey
Weight: 612g
Item# CT105
14x9 Blitz
Weight: 695g
Item# CT149
14" Round
Weight: 695g
Item# CT14R
CARRY BAG / HARNESS / CONTROL BOX COVER
White's and Gold Search Australian Caps
Low profile, "stand up" front
heavy weight brushed cotton,
Velcro back adjustment. One size
fits all. Item# CAP0
White's Padded Gun Style Detector Bag
Fits all models except TM 808.
Does not require dis-assembly
of instrument. Item# PDB02
Trash and Treasure Bag
Nylon with zipper closer. Built-in
adjustable belt (up to 50”) with
quick-click buckle. Separate
pockets for trash and treasure.
Item# TTB01
Trash and Treasure Apron
White canvas material with
white’s logo and separate trash
and treasure pouches.
Item# TTB02
LCD Rain Hat - GMT
For use with the White’s GMT
Goldmaster. Protects the LCD
Screen from dirt, mud, light rain
and general wear.
Item# LCDGM
LCD Rain Hat - Spectra V3i / V3 / VX3
For use with the White’s Spectra
V3i / V3 / VX3 detector models.
Protects the LCD Screen from
dirt, mud, light rain and general
wear. Item# LCDSP
LCD Rain Hat - MXT / SST / M6
Fits the White’s SST / MXT
E-Series / MXT Pro / M6 detector
models. Protects the LCD Screen
from dirt, mud, light rain and
general wear. Item# LCDRH
Detector Backpack (Deluxe)
Fits most White’s models. Two
12” x 12” zippered accessory
pockets. Adjustable shoulder
straps, padded back, and
hanging loops. Item# PDB03
TDI Pro Oz-Series Harness
The Harness is constructed of
Heavy Duty Cordura for
durability Item# TDI03
White's Control Box Cover (standard)
For the White’s GMT / GMZ / DFX
/ MXT / MXT Pro / Spectra V3i / V3
& VX3 detector models. Canvas
made, helps protect the control
box from dirt, mud, scratches and
wear. Item# CBC01
White's Control Box Cover (TDI Pro Oz-Series)
For White’s TDI / TDI Pro Oz
Series Canvas made, helps
protect the control box from dirt,
mud, scratches and general wear.
Item# TDI08
Genuine Leather Lesche Sheath
Built to last, Fits a belt up to 4”
inches thick (Lesche Saw Tooth
Digging tool - sold separately)
Item# LS002
Axe Blade Cover
Genuine leather cover, protects
your axe head blade from
weather conditions.
Item# ABC01
Genuine Leather Pick Holder
Pick Holder slides through your
Harness stap or Belt. Made from
genuine leather.
Item# GLP01
Genuine Leather Clip on Pick Holder
Clip on Pick Holder attaches to
your Harness or Belt, made from
genuine leather.
Item# CPH07
Treasure / Drink Holder
Made from canvas, store 600ml
bottle of drink or use as a finds
bag, pull cord top for easy securing
items or drinks. Item# CDB01
Belt with Pick Holder
Made from genuine leather to last
with the pick holder designed to
position pick at an angle away
from leg. Size available: Medium
1200mm Item# PHB01
Canvas Battery Pouch for SD / GP / GPX Batteries
Replace standard battery holder
on harnesses. or use with a belt
using loops on the reverse side.
Item# CBP01
Genuine Leather and Canvas Gaitors
Security Hand Held Holster
Security Handheld Holster for
whites Spectra-scan
Item# SHH01
Protect your legs from thorns and
snake bites. Velcro strips to adjust
desirable leg width.
Leather Gairors Item# LG001
Canvas Gaitors Item# LG002 17
BATTERY / CHARGERS / POWER CABLES / ADAPTER
TRX (2 x AA Cell) Battery Holder
Replace broken or lost TRX (AA) Battery
Holder. 9 Volt Connector on side.
Item# 2CELL
6 Volt (4 x AA Cell) Battery Holder
Plastic container holds four 1.5v AA
batteries (6v total) used in many older
detector models.
Item# 4CELL
International Wall Cube
Universal NiMH Charger with plugs.
Do away with stepdown transformers
as the NiMH Charger automatically
adapts to all International voltage &
current types. Item# NIC10
Nicad Rechargeable Battery Kit
For DFX, XLT, GMT. Includes:
Battery, Wall Charger and
Stepdown Transformer
(For use with batteries PN: 802-5151-1)
Item# NIC05
Plastic container holds six 1.5v AA
batteries (9v total) used in many models
from 1968 to 1988.
PN: 523-0005
Item# 6CELL
NiMH Rechargeable Battery Kit
Premium Rechargeable Battery Kit for
White’s SPECTRA V3/i, DFX, MXT,
detector models. 3 hours to full charge.
(For use with batteries
PN: 802-5281 / 802-5321)
Item# NIC01
Plastic container holds eight 1.5v AA
batteries (12v total).
Used in many models from 1968 to date.
Battery Holder.
PN: 523-0006
Item# 8CELL
Heavy Duty NiMH Rechargeable Battery
Heavy Duty (2200 mAh)
Rechargeable Battery Can be used
with SPP, MXT, XLT, DFX, VX3 and V3i
‘models. Must be recharge only with
NiMH Rechargable Kit.
Item# NIC09
Slide-In 8xAA battery holder
Holds eight 1.5v AA batteries.
Used with: White’s SPP, SGT, SST,
GMT Goldmaster, Spectra V Series,
MXT Series, DFX Series, GMZ and XLT.
PN: 802-7150
Item# S8AAH
6-T 8xAA Battery Holder
Holds 8 “AA” batteries.
Combination Battery door/battery holder
Used with: White’s MX5, Coinmaster GT
and Prizm 6T. Batteries not included!
Item# 6TABH
TDI Lithium-Ion High Capacity Rechargeable Battery
Replacement or Spare Lithium-Ion
Battery for the TDI Pro.
High Capacity: lasts 30% longer than
standard TDI Batteries, approximately
10 hours running time.
Item# TDI02
TDI Auto Accessory 12v Car Charger
Car charger for the White’s TDI Pro
Oz-Series metal detectors.
(P/N 509-0041)
Item# TDI04
C-Cell Battery Holder
Holds 4 “C” size non-rechargeable
batteries. Used in mid-range and top of
the line models from 1983 to date.
P/N: 802-5185
Item# CCELL
TDI Smart Wall Charger
Wall charger for the White’s TDI and
TDI Pro. Includes TDI Power Cable.
(P/N 509-0040)
Item# TDI05
Tecxus TC6000 Wall / Car Battery Charger
Charges all popular consumer cells
(AAA, AA, C, D and 9V) Suitable for
NiMH & NiCd. LCD display and LED
indicators. Includes car adapter.
Item# TXC01
TRX 9 Volt Connector
Replace worn, broken or lost TRX 9 Volt
connector.
Item# TRX9V
TDI Power Cable
SD - GP Power Cable
SD - GP (4 Pin Plug)
Curly Power cable
Item# GPX03
Step-down Transformer 240v - 115v (100Watt)
Use with NiCAD and optional for NiMH
Rechargeable battery kits.
Item# NIC08
18
TDI Power Cable to be used with TDI
Smart Wall Charger
Item# TDI06
GPX Power Cable
GPX (5 Pin Plug)
Curly Power cable
Item# GPX04
PANS / SIEVES / BUCKETS
9'' inch Tin Pan
Tin gold pan, use to look for gold!
Weight: 340g.
Item# PAN03
10" inch Mini Turbo Pan
10” (25cm) Turbopan
Weight: 128g.
Item# PAN14
10.5'' inch Poly Pan (Black)
Poly gold pan, use to look for gold!
Weight: 118g.
Item# PAN07
11" Plastic Gold Pan with Double Riffles (Blue)
Weight: 145g.
Item# PAN12
12'' inch Tin Pan
Weight: 525g.
Item# PAN04
13.5'' inch Poly Pan (Black)
Weight: 145g.
Item# PAN08
14'' inch Tin Pan
Weight: 765g.
Item# PAN05
14" inch Plastic Pan (Green)
Green in color for good visual
contrast with black sands and fine gold
particles. Weight: 315g.
Item# PAN10
14" Plastic Gold Pan with Double Riffles (Blue)
Weight: 145g.
Item# PAN11
16" Turbo Pan
16” (40cm) Turbopan
Weight: 390g.
Item# PAN13
White Grip Bowl to suit Aluminum Sieve
Hold up to 10 Litres of water or mineral soil,
Sturdy Hand grips on left and right sides.
Aluminum Sieve not included. 33cm rim.
16.5cm deep. Weight: 365g (appoximately)
Item# ASB01
Green Panning Sieve
Eliminate unwanted debris from getting into
the pan, saving time & effort.
Frame: 320mm top and 265mm bottom.
Mesh: 9mm Square / 12mm Diagonal.
Weight: 333g (appoximately)
Item# GSS04
Turbo Panning Sieve (Plastic)
Made for the 16” inch Turbo Pan to
eliminate unwanted debris from getting into
the pan. Height: 10cm, Mesh: 5mm Square
Weight: 362g (appoximately)
Item# TBS01
Prospectors Bucket
Hold 11 Liters of water or mineral soil, metal handle with white plastic grip.
Bucket Height: 23cm
Empty Weight: 470g.
Green Panning Sieve not included.
Item# SBU01
Course Aluminium Sieve
Aluminum Frame. 13”/330mm rim, 2”/50mm
deep. Course & Fine stainless steel mesh
sizes. Weight: 450g. (appoximately)
Item# GSS01
Fine Aluminium Sieve
Aluminum Frame. 13”/330mm rim, 2”/50mm
deep. Course & Fine stainless steel mesh
sizes. Weight: 450g. (appoximately)
Item# GSS02
Plastic Suction Bottle (Large)
Plastic suction bottle for retrieving your gold
from a pan. Small & Large sizes
Available.
Item# PSB02
15" inch Plastic Pan (Maroon)
Plastic Suction Bottle (Small)
16" inch Tin Pan
Plastic suction tweezers
Easy view of black sands and gold. Large
15” size with 3 layer built in
ripples on one-third of pan edge.
Weight: 440g. Item# PAN02
Weight: 910g.
Item# PAN06
Plastic suction bottle for retrieving your gold
from a pan. Small & Large sizes
Available.
Item# PSB01
Retrieve tiny & hard bits of gold from Pans.
Tweezer Length: 16 cm
Item# PST01
19
SLUICE / CONCENTRATOR / DISPLAY CASES
Mini Gold Concentrator
The Mini Gold Concentrator grades the
wash dirt as the operator operates the
two handles on top, back and forth.
Gravity does the rest, with the heavies
concentrating in the receiving bowl and
the light material being displaced over
the inside lip Item# MGC01
AU Trap “Recon” Sluice
Dual Flare / Dual Step Riffles 28” x 8”
x 3” (Variable) This New Stream Sluice
Box will amaze you at its Fine Gold
Recovery. The Intake Flare accelerates
the water flow speed & pressure the Exit
Flare suddenly drops the pressure and
spreads the material out over a wider
area allowing the Gold to easily fall out
and is instantly grabbed by the riffles.
Item# AUT01
BLUE DOG Hand Dredge
Supplied with four nozzles this
prospecting tool will allow a prospector to
setup in one or another of multiple
nozzle configurations to easy retrieve
gold or gem bearing materials under
various prospecting conditions.
??cm long x 6cm diameter.
Weight ???g Item# BD001
FAT BOY Hand Dredge
This tool will allow the prospector to
collect large amounts of material with
every cylinder load. Under the right
conditions two or three strokes could fill
this unit to capacity. The more loose
material the better the suction.
95cm long x 6cm diameter.
Weight 1070g Item# FB001
Alluvial Nugget Sucker
Belt Mounted, Manual suction crevice
dredge designed to remove fine alluvial,
small and tiny gold from the bottom of
narrow cracks and crevices in bedrock.
Nozzle: 5mm(W) x 12mm(L)
Weight: 475g. Item# ANS02
Crevice Nugget Sucker
Used to get nuggets and flakes out of
those difficult crevices and hard to reach
cracks. Sturdy construction, includes a
stainless tube, cap and rod.
63cm long x 6cm diameter.
Weight 780g (so it doesn’t float away in
the water) Item# CNS01
Panners Mate
The Panners Mate is an effective
concentrator for a wide range of different
minerals. Made from Stainless Steel and
is easily operated by hand without the
need for pumps or motors. Can be used
directly in a creek or dam when no water
is available. Weight 4 Kgs.
Item# PMATE01
20
Glass Sample Bottle
Ideal for small / tiny gold, found from
panning. Available in:
1 ounce Item# GZB01
Half ounce Item# GZB02
2 ounce Item# GZB05
Plastic Sample Bottle
Ideal for small / tiny gold, found from
panning. Available in:
1 ounce Item# GZB03
Half ounce Item# GZB04
Square Display Case - Shallow Base
Square display case for displaying small
nuggets.
Length & Width: 4cm, Height: 1cm
Item# NC001
Square Display Case - Deep Base
Square display case for displaying small
nuggets.
Length & Width: 4cm, Height: 1.5cm
Item# NC002
Circle Nugget Display Case
Circle display case for displaying small
nuggets. Plastic perspex,1” inch in size.
Item# NC006
Standard Nugget Display Box
Display box to show off small
nuggets and finds to friends and family.
Includes: 8 x Square display cases
Item# NC004
Deluxe Nugget Display Box
Display box to show off small
nuggets. Fits 30, “1 inch square
display cases. (Included)
Item# NC005
Stylish Display Box
Ideal display box to show off small
nuggets. Fits 25, “1 inch Circle display
cases. (Included)
Item# NC009
Elegant 10 Circle Pod, Display Case
Present your small nugget finds in this
elegant display pod arrangement.
Size: 19cm(L) x 10cm(W) x 3cm(H)
Includes: 10 x Circle Display Pods
Item# NC003
Collectors 18 Square Pod, Display Case
Display small nuggets in this
Collective display pod arrangement.
Size: 19cm (L) x 10cm (W) x 3cm (H)
Includes: 18 x Square Display Pods.
Item# NC007
Serious Prospectors Nugget Display Case
Sturdy Construction with clear glass
lid, display a large proportion of
small gold nuggets, includes: 50 x 1”
inch round pods. Item# NC008
PICKS / SHOVEL / SCOOP / TROWEL / DIGGING TOOL
8" inch Coin Probe
8” inch steel shaft with brazed ball
bearing tip. 4” wire wrapped wood
handle. Item# 8CP01
Stainless Steel Super Pro - Long Handle Sand Scoop
Shortened by unscrewing the rubber
black hand grip in the middle of the sand
scoop handle. Handle Length: 105cm
Basket diameter: 13cm
Weight: (appoximately)
Item# LHS04
Coin Hunting Trowel (Orange Handle)
Slice and lever through turf
without disurbing much surface area.
Length: 13cm,
Blade from center: 13.5cm
Weight: 165g. (appoximately)
Item# CDT01
Coated Steel Standard - Long Handle Sand Scoop
scoop handle. Handle Length: 72cm
Weight: 1.457 Kgs (appoximately)
Item# LHS01
Lesche Saw Tooth Digging Tool
For serious coin hunters who like to
detect in turf or lawned areas.
Its saw tooth edge can slice through
grass roots enabling a perfect ‘plug’ of
turf. Length: 12cm, Blade: 18cm
Item# LS001
Plastic Digging Trowel
Pointed shaped, plastic made digging
trowel. Perfect for scooping up sand.
Item# PBHT1
Coated Steel Big Basket - Long Handle Sand Scoop
scoop handle. Handle Length: 105cm,
Weight: 1.457 Kgs (appoximately)
Item# LHS02
Glass Fiber - Pick Mattock
Prospectors Shovel
Sturdy handled perfect for digging out
loose dirt from holes. Blade is made
of tempered steel. Length 69 cm
(Blade 21 cm) Blade Width: 15 cm,
Weight 800g (appoximately)
Item# PM006
Lesche Mini Shovel - (Long Handle)
Strong sturdy shovel, Serrated edges
to help cut through plant and roots
and turf. Overall Length: 62 cm
Blade Length: 18cm.
Weight: 1.060g (appoximately)
Item# LMS01
Miners Pick
Geologist Pick
Aluminium Sand Scoop
Made from Aluminium and
features a sturdy handle with
rubber gripping.
Item# ASC01
Nugget Scoop
Great for beach work, made from
harden plastic, durable to salt
water conditions. *Color may vary.
Item# NSC01
Stainless Steel Shorty - Long Handle Sand Scoop
Can not be shortened.
Handle Length: 26cm
Weight: (appoximately)
Item# LHS03
Ideal for digging or moving dirt.
Handle Length: 60cm Blade Length from
center: 15 cm. Weight: 920g
(appoximately) Item# PM003
Ideal for digging or moving dirt
Item# GEOP1
Wooden Handle - Pick Mattock
Dig dirt with ease, ideal for prospectors
& metal detector operators.
Handle: 39cm Blade Length from
center: 14cm Weight: 900g.
(appoximately) Item# PM001
Lesche Mini Shovel - (Short Handle)
Strong sturdy shovel, Serrated edges
to help cut through plant and roots
and turf. Overall Length: 27 cm
Blade Length: 18cm.
Weight: 0.890g (appoximately)
Item# LMS02
Ideal for digging or moving dirt.
Handle Length: 39cm.
Blade Length from center: 14 cm.
Item# PM005
Walco Picks
Mini - Metal handle.
Weight: 755 grams (appoximately)
Handle 400mm, tip to blade 15.5 cm.
Item# WAL01
No.3 Small
Handle 540mm, tip to blade 28 cm.
Item# WAL02
No.1 Standard
Item# WAL03
Heavy Duty Large
Item# WAL04
Jumbo Heavy Duty Prospectors Pick
21
Item# WAL05
DIGGING TOOLS / HEADPHONES / REPLACEMENT PARTS
Nugget Cup
Quickest and easiest way to
isolate a tiny piece of gold, Made
from Heavy Duty ABS plastic,
Orange color for easy spotting in the
bush. Item# NCP01
Mini Folding Shovel
A great item for hiking, walking the
dog, in the garden. Includes cover.
Handle Length: 12cm
Spade Length: 12cm
Weight: 150g Item# PM004
White's Spectra V3i / V3 Wireless Headphones
Multiple channels to choose from to
avoid picking up signals from other
Spectra V3i/V3’s in the area, or set
two headphones up to hear targets
from one detector. A terrific tool for
teaching about target sounds!
Item# SPC03
White's Royal GT Headphone (30 ohms)
Hear those smaller, deeper targets
with these quality built headphones.
Right and left volume controls.
Mylar stereo speakers with titanium
coating, gold plated 1/4’’ right-angle
stereo plug. Item# RGT01
RPG Headphone (8 ohms)
Fully adjustable headband with large
soft vinyl ear cushions to reduce
unwanted noise. 1/4’’ stereo plug.
Right and left volume controls.
Item# RPG01
White's ProStar Headphones
A premium headphone “Made in the
USA” by White’s specifically for our
metal detectors, Rugged, over-sized
ear-cups, Water resistant chassis,
50 OHM Mylar Speakers with
Titanium Coating, 5k Audio Taper
with R/L ratcheting volume controls,
Soft, coiled cord stretches to over 6
feet. Item# WPR01
White's StarLite Headphone
Lightweight,1/4” 90 degree,
nickel-plated stereo plug. 32 OHM,
frequency response 20-20kHZ.
6-ft. soft, coil cord. Padded
headband with adjustment, padded
swivel ear-cups. Item# SLH01
External Speaker
For Minelab GPX 4500 / 5000
Detector models
Item# GPX02
22
Headphone Jack Cover Plug
Protect headphone jack from dirt, sand,
water, when headphones are not used.
Item# HPJ01
White's Replacement Speakers
4 ohm Speaker, (paper cone) fits most
older White’s models. Item# RSP02
16 ohm Speaker, (Mylar cone) fits most
current White’s models. Item# RSP01
(electronic skills required)
TELEX Underchin Headphones
Superb quality sound, very lightweight
and worn under the chin or behind your
neck. No need to use an annoying
speaker anymore during hot weather
Item# TLX01
White's Extension Rod
Aluminum center rod section, Can be
added to any White’s model between
the lower fiber rod and upper Aluminum
“S” rod. Extends adjustable length 4.5”
to 12” inch. Item# LFS05
White's 'S' Rod (Surfmaster)
Replacement Aluminum “S” Joiner
Stem, Standard equipment length with
Cam Lock and eyelets to hold the
Surfmaster P.I Control box
Item# LFS07
White's 'S' Rod
Replacement Aluminum “S” Joiner
Stem, Standard equipment length with
Cam Lock. For MXT, MXT PRO, GMT,
SPECTRA V3i, and TDI Pro
Item# LFS04
White's Lower Fiber Stem (Standard)
Replacement lower stem
section for white’s detector
models. Connecting the search
coil to the upper aluminum rod.
Length: 22” inches. Item# LFS02
White's Lower Fiber Stem (Tall Man)
Replacement lower stem
section for white’s detector
models. Connecting the search
coil to the upper aluminum rod.
Length: 30” inches. Item# LFS03
White's Lower Fiber Stem (Child)
The Child Lower Fiber Rod
measures at total of 18 inches
long, it is 5 inches shorter than the
standard lower fiber rods. Ideal for
small children. Item# LFS06
REPLACEMENT PARTS
Diver Rod Kit
Converts the handheld
Surfmaster PI’s ‘S Rod’ into a
straight rod. Recommended for
better buoyancy while scuba
diving. Item# DRK01
White's Search Coil Steady Bracket
Lock the search coil angle in place for
working in brush or tall weeds. Fits
all white’s search coils. Angle can be
adjused. Item# SBR01
White's GMT "Display Screen Decal"
Replace old, worn, scratched or
broken decal windows helps protect
screen from dirt, mud and fading from
sunlight. Item# WD02
White's MXT / SST "Display Screen Decal"
White's DFX "Display Screen Decal"
White's SPECTRA V3/ V3i "Display Screen Decal"
Nugget Finder - Coil Plug Protective Boot
Protect any unused coils from
getting dirt and dust in the coil plugs
pin sockets. Item# NFCP
Spring Clip for White's stem pieces
Replace old, worn, broken spring clips
that lock the stem into place.
Item# SPR01
Multipurpose Knuckle
sunlight. Item# SH005
Black Searchcoil Tape
Use to fix a search coil skid plate cover
to the base of the search coil.
Item# SCT01
ARM Cup Strap
Replacement arm cup strap for lost
or worn original equipment.
Item# ARM03
TDI Conductivity Boot
Protect the switch from dust particles,
grit, mud, fine stones & residue.
Includes: TDI screw nut.
Item# TCS01
TDI Conductivity Switch
Replace broken, worn or damaged
conductivity switch on a White’s TDI
Pro Oz-Series detector.
Item# TCS02
White's Control Box Knob
Replace broken, damaged or worn
Control-box knobs. Fits most White’s
models from 1980 to date.
Item# WCK01
White's Surfmaster Control Box Knob
Replace broken, damaged or worn
Control-box knobs.
Item# WSK01
White's Surf Master PI / Beach Hunter 'O' Ring
To be used to replace the worn,
cracked or abradded “O” ring seal
around main control box lid.
Item# SRF06
White's Surfmaster PI Silica Gel Bag
Absorbent silica draws moisture away
from internal components.
Item# SGB01
ARM Cup Foam Pad Kit
Pair of foam pads for all White’s Arm
Cups (elbow supports). Peel and stick.
Item# ARM01
White's ARM Cup Thumb Bolt
Used for lost, worn or broken
original equipment
Item# ARM02
Rubber Feet for White's Control Box
Pair (2) Peel & Stick rubber feet. 1/2
inch rise. Replacement for lost or worm
original equipment or add to any
detector model. Item# WRF01
Velcro Strips - 2 per Pack
Use a velcro stip to secure the coil
cable around lower stems and upper
shafts. Item# VEL01
¼" Bolt, Wing Nut and Teardrop Washer Set
Use with Minelab, Nugget Finder and
Coiltek Searchcoils.
Includes 2 x tear drop washers
Item# NFCT02
23
REPLACEMENT PARTS / Accessories
White’s Replacement Nut / Bolt / Washer Set
White’s Replacement Nut / Bolt /
Washer Set. Item# NBS01
¼" Bolt / Wing Nut
Secure the lower stem onto the
Searchcoil bracket, designed for
Nugget Finder and Coiltek Search
coils. Item# NFCT01
Coil Cable Clips - 3 Clips per Pack
These Clips are used to Fasten
the Coil Lead to detector stem.
Item# SH007
White's Coinmaster / PRIZM Battery Door
Replace broken Coinmaster or
Prizm battery door covers
Item# CPBD1
White's Coinmaster ARM Cup Set
For Coinmaster, Coinmaster Pro
and early Prizm models. Includes:
Arm / Cup, Base & Bolt.
Item# CMA01
White's Heavy Duty ARM Cup
Non adjustment hole position.
Comes with arm cup strap.
* Does not fit Coinmaster or early
Prizm detector models.
Item# HDA01
White's Universal Search Coil Adapter Kit
Needed if replacing 1979 to early
1992 clevis or isolator with the
later version lower fiber rod.
Item# UAK01
White's Heavy Duty Clevis Kit Obsolete
Old-style separate clevis for pre1988 models. Connects loop to
lower rod. Thumb bolt and washers included.
Item# HCK01
Pinpoint Toggle Switch for MXT / V3i
Fits White’s MXT, MXT PRO,
Spectra V3i Models.
Replace worn or broken pinpoint
toggle. Item# PTS01
SST VDI Screen Decal
Peel and stick to replace VDI
decal. Replace worn, scratched,
or damaged VDI number chart
(below LCD Screen).
Item# WD05
24
Control Arm Kit (for Minelab Detectors)
Use your detector like a whipper
snipper. Swivel design allows the
detector operator to have a large
sweep without straining your
shoulders and back. Designed to be
used with Minelab GP / GPX
models. Item# SH001
Control Arm Kit (for White's Detectors)
Swivel design allows the detector
operator to have a large sweep
without straining your shoulders
or back. Designed to be used with
White’s detector models.
Item# SH008
Detector Cable Guard
Designed for Minelab metal
detectors to help prevent against
falsing at Control Box by preventing
hip touching cable. Item# SH006
Jeweler's Loupe
Glass Jeweler Loupe Eye
Magnifier Two Sizes Available:
10 x 21mm / 30 x 21mm
Item# GJL0
Mosquito Head Net (Green)
Ideal protection from flies &
mosquitoes. Packs down small for
easy storage.
Item# MSQ01
HipStick
This is a “Must Have” if you have
shoulder or back problems as it
eases the load on your shoulder.
Small, Medium and Large sizes
available. Item# HIP0
White's Standard Control Box Stand
For GMT / MXT / MXT Pro / SGT
/ SST and Spectra V3i. Mounts to
control box using existing control
box screws. - Screws Included
Item# SCB01
TDI PRO OZ-Series Control Box Stand
For the TDI Pro Oz-Series / TDI Pro
and past models that have a large
control box. Mount to control box
using existing control box screws.
Keep control box out of wet grass,
mud, dirt and off abrasive ground.
Item# TDI07
8mm Bungee Cord
8mm thick bunji cord with quick
adjustment hook. Help take weight
off your shoulders when using the
detector or large search coils.
Item# BJC01
GOLD BOOKS / MAPS
German Water Bottle with Cup
Compact design includes a
water bottle, insulation case, cup
and a strap to hold it all together.
Holds 600ml Item# GER01
Super Force - Rare Earth Magnets
Collect metal rubbish from your dig
holes by either attaching a hollow
magnet to the end of your pick. or
by holding the solid magnet in your
hand. Item# MAG0
Digital Scales
Perfect for weighing small
nuggets. Easy calibration using
‘tare’ button. Includes leather case
and instructional leaflet.
Sizes: 1000g x 0.1g / 200g x 0.01g.
Item# DS00
Successful Treasure Hunting
The Art of Mental Detecting
Discussion on mental prepartion, goal
setting and research to develop the
positive attitude necessary to
succeed. By Lance Comfort.
Item# STH01
Metal Detecting for Beginners
This popular book is a favorite in the
industry and a new offering by White’s.
Authored by Ed Tisdale, one of
Florida’s top White’s dealers, it’s a
great book for new hobbyists.
Item# MTB01
The World of the Relic Hunter
Recommended for anyone thinking
about relic hunting as a hobby or the
seasoned pro wishing to pick up a few
extra tips. 183 pages.
Item# WRH01
Pan for Gold the Basics
A comprehensive guide to the basics
of panning for gold. Where to go,
equipment, and more. Lots of great
tips from veteran panner and
prospector, Rita Houston.
28 Pages.
Item# PAN01
In Search of Treasure
An excellent resource book packed
full of down-to-earth information. This
book will get you hunting in the right
places and finding some great stuff.
- By Dick Stout Item# DDSOT
Coin Hunting In Depth by Dick Stout
If you own a metal detector or are
considering purchasing one, and you
want to increase your odds of finding
old and valuable coins, this book is
for you. 160 Pages.
Item# DSCHD
Fists Full Of Gold
In this 360+ page book US
Geologist Chris Ralph takes a unique
approach in teaching the geological
“trade skills” of prospecting.
360 pages.
Item# FFG01
Inside the Metal Detector
An encyclopedia on the history of
metal detector technology with
indepth analysis on all types of metal
detection, from induction balance to
pulse induction to VLF. Co-authored
by White’s Engineering Manager,
Carl Moreland. 282 pages.
Item# IDM01
Advanced Nugget Shooting - By James McCulloch
MXT the Edge by Jeff Foster
This spiral bound guide is packed with
information on selecting the proper
metal detector, tuning, ground
balancing, other necessary equipment
and techniques, where to go and how
to find those elusive gold nuggets.
Item# ANS01
The MXT Edge, provides detailed
information on the use, operation,
and technology of the White’s MXT as
well as vital information on the related
topics of ground mineralization and
target metal characteristics.
114 Pages. Item# MXT03
25
GOLD BOOKS / MAPS
Pulse Power: Finding Gold at the shore
In this detailed and informative book
Mr. Clynick draws on his 30 years of
detecting experience and that of top
pros worldwide to produce this
advanced guide for the serious water
and shoreline treasure hunter.
Item# CJC01
Dunolly and Tarnagulla Goldfields (CD)
Dunolly and Tarnagulla Goldfields
E-Book by John Tully. A book that was
once “out of print” is now available on
CD in PDF E-Book format. 56 Page
E-Book, Requirements: PC-CDROM,
Adobe Reader 8 or later.
Item# JTM012
Gold Mining in the 21st Century
A thorough introduction to efficient,
modern day methods of finding gold,
this volume offers 279 pages of expert
information on locating, retrieving,
geology for gold, panning, sluicing,
dredging, dry washing, metal
detecting and much more
(fully illustrated) Item# GM21C
Castlemaine Goldfield Maps by John Tully
Detailed maps covering Castlemaine
and includes the surrounding areas
of Chewton, Golden Point, Moonlight
Flat, Campbells Creek, Barkers Creek,
Vaughan, Irishtown, Fryerstown,
Elphinstone and Taradale.
Item# JTM01
SPECTRA V3 / V3i Manual (Replacement)
Replace lost, worn, rippered or
misplaced (Full color) Spectra V3i
Owners Manual.
Item# SPC04
Dunolly Goldfield Maps by John Tully
Detailed maps covering the Dunolly
goldfields in Victoria and includes the
surrounding areas of Moliagul,
Inkerman, Golds borough, Burnt Creek,
Bromley, Bet Bet and
Waanyaara.
Item# JTM02
Metal Detecting Previously Hunted Sites
Metal detecting tips, techniques and
secrets for hunting in flogged areas.
Author Vincent C. Pascucci. 96 Pages
Item# PHS01
Kingower Goldfield Maps by John Tully
Dunolly's Brothells
This book is about the brothels of the
1860 - 1880 period in Dunolly, Central
Victoria and the men and women
associated with them. By John Tully
Item# JTM010
Majorca & Homebush Goldfield Maps by John Tully
Dunolly Goldfields Nugget Reference Map
This is the most comprehensive list
of gold nuggets found in the Dunolly
district. By John Tully
Item# JTM09
Maryborough Goldfield Maps by John Tully
Tunstalls a Forgotten Gold Town (CD)
Tunstalls a Forgotten Gold Town
E-Book by John Tully. A book that was
once “out of print” is now available on
CD in PDF E-Book format. 42 Page
E-Book, Requirements: PC-CDROM,
Adobe Reader 8 or later.
Item# JTM011
26
Talbot Goldfield Maps by John Tully
Detailed maps covering the
Kingower goldfields in Victoria and
includes the surrounding areas of
Rheola, Wehla, Glenalbyn and
Smugglers Glen.
Item# JTM03
Detailed maps covering the Majorca
and Homebush goldfields in Victoria and
Lamplough, Bung Bong, Snake Hill,
Adelaide Lead, Dunach and Red Lion.
Item# JTM04
Maryborough goldfields in Victoria and
Havelock, Carisbrook, Craigie, Timor,
Alma and Adelaide Lead.
Item# JTM05
Detailed maps covering the Talbot
goldfields in Victoria and includes the
surrounding areas of Daisy Hill,
Emu and Caralulup.
Item# JTM06
GOLD BOOKS / MAPS
Tarnagulla Goldfield Maps by John Tully
Tarnagulla goldfields in Victoria and
Waanyarra, Llanelly, Newbridge and
Long Bush.
Item# JTM07
Gold & Relics Sites of VIC by Doug Stone
Clearly identifying the location of
critical features of interest to the
prospector, such as reefs, alluvial
leads, relics of past mining activity and
locations. See pricelist for complete list
of maps available for Victoria.
Item# DSV0
Whipstick Goldfield Maps by John Tully
Detailed maps covering the Whipstick
and Kamarooka sections of the
Greater Bendigo National Park in
Victoria. Included are the areas of
Neilborough and Eaglehawk.
Item# JTM08
Gold & Relics Sites of NSW by Doug Stone
of maps available for NSW.
Item# DSN0
NEW! Inglewood Goldfield Maps by John Tully
Detailed maps covering the Whipstick
and Kamarooka sections of the
Greater Bendigo National Park in
Victoria. Included are the areas of
Neilborough and Eaglehawk.
Item# JTM08
Gold & Relics Sites of WA by Doug Stone
of maps available for WA.
Item# DSW0
Metal Detecting for Gold in Australia
Hard cover book with over 400 pages
in colour. Jam-packed with prospecting
tips, detailed descriptions and over 150
detailed maps of Australia’s ‘major gold
nugget producing areas through-out
the country. A must for prospecting
enthusiasts! Item# DSV02
The Innovative Gold Prospector
The manual looks at aspects of
panning, sluicing, cradles, trommels,
hard rock prospecting & stone
crushing, mercury amalgamation and
numerous small tips and ideas from the
point of view of learning. By Stephen
Barnham. Item# SBM016
Gold Atlas of Western Australia by Doug Stone
Contains all the map areas from the
WA Gold & Relics Sites, plus more.
Alluvial gold diggings, mines, reefs
and public lands are marked UTM
map grids. Spiral bound for easy use.
Measurements: 400mm x 265mm
Item# DSW06
Gold & Relics Sites of NSW by Doug Stone
NSW Gold & Relics Sites, plus many
more. Alluvial gold diggings, mines,
reefs and public lands.
Spiral bound for easy use.
Item# DSN04
Gold Atlas of Victoria by Doug Stone
Victorian Gold & Relics Sites - Alluvial
gold diggings, mines, reefs and public
lands. Spiral bound for easy use.
Item# DSV01
Gold Prospecting by Doug Stone
This is an earlier edition by Doug
Stone. He gives considerable detail
about gold bearing ground and ways to
trace & extract alluvial deposits.
Item# DSGP01
Trentham - Blackwood Gold Prospecting Guide
The district for the most part is very
rough, steep and wet. Although these
fields are close to Melbourne, the
country must be taken seriously and
should be left alone if you do not have
bush experience. 9 maps and notes.
By Stephen Barnham. Item# SBM017
Malmsbury & Taradale Gold Detecting Guide
This book provides a set of 4 maps
and notes on areas around Taradale &
Malmsbury to go gold detecting.
By Stephen Barnham.
Item# SBM018
27
GOLD BOOKS / MAPS
Stray Places Gold Detecting/Prospecting Guide
5 maps and notes covering Bacchus
Marsh (Goodman Creek), Mt Doran
between Ballarat & Geelong,
Clydesdale near Yandoit, Cambelltown
between Newstead and Creswick and
the Barfold Ranges reefing field north
of Kyneton. By Stephen Barnham.
Item# SBM015
Ballarat (Nerrina) Gold Detecting Guide
Three maps covering the Little
Bendigo Goldfield (Nerrina) to the
north east of Ballarat. It covers the
Nerrina area, White Swan reservoir
and the heads of Slaty Creek. By
Stephen Barnham.
Item# SBM02
Daylesford and District Gold Panning
This book is about gold panning in the
Daylesford area and is aimed at
people with no experience.
By Stephen Barnham.
Item# SBM07
Daylesford Gold Detecting Guide
This second edition book is a set of
11 basic maps and notes covering the
gold areas around Daylesford.
By Stephen Barnham.
Item# SBM08
Gold Detecting For the More Serious
This title contains material about
procedures and attitudes to help you
help yourself to become a confident
and successful detector operator.
By Stephen Barnham.
Item# SBM010
Gold Panning for Novices
This title looks at different types of
pans, how to pan, useful tools, how
to prospect, useful tips, other uses for
pans other than basic panning, exotic
pans, how to find out about places to
go and a few safety tips. By Stephen
Barnham. Item# SBM011
Leonards Hill & Barkstead Gold Detecting Guide
This is the second edition, still with 4
maps but now centred on Leonards
Hill and Barkstead; an area located
between Daylesford and Ballan.
By Stephen Barnham.
Item# SBM012
28
Maldon - Newstead Gold Detecting Guide
10 basic maps and notes covering the
gold areas around Maldon and
Newstead. The area has a history of rich
areas and nuggetty gold.
By Stephen Barnham.
Item# SBM013
Porcupine Ridge Gold Detecting Guide
5 maps and notes on areas south of
Taradale to go gold detecting.
The maps are of a basic mud map style
designed to get you into the
areas. By Stephen Barnham.
Item# SBM014
A Manual for the Novice Gold Prospector
Author Stephen Barnham writes about
the basics of detecting, panning and
sluicing. This book is about how to get
from having no idea about gold
prospecting to having the basic
knowledge you need. Item# SBM01
Ballarat District Gold Panning
This book provides a set of seven maps
and notes on several areas around
Ballarat to go gold panning as well as
how to use a pan and what to look for.
By Stephen Barnham.
Item# SBM03
Bealiba & District Gold Detecting Guide
This guide of seven maps and notes
covers some of the gold producing
areas around Bealiba.
By Stephen Barnham.
Item# SBM04
Bullarto - Blakeville Gold Prospecting Guide
5 maps and notes. There is a belt of
reefs and a history of rich finds.
By Stephen Barnham.
Item# SBM05
Creswick Gold Detecting Guide
Set of 9 maps and notes on areas
around Creswick to go gold detecting.
By Stephen Barnham.
Item# SBM06
Gold Detecting for Novices
Aimed at people with little or no
experience. It is not specifically about
detectors, but does explore the issues of
coil sizes and types as well as the
typical detecting mistakes people make.
By Stephen Barnham.
Item# SBM09
Left: Thirty-four ounces of gold found by
author and his mate around Dunolly.
By Mick
With my holidays fast approaching I
contacted one of my prospecting mates,
Rob and after some discussion we
decided to have a go at prospecting
some of the Golden Triangle areas in
Victoria. Since the gold rush days of the
1800s, this area has been well known for
producing some of the largest nuggets in
the world and with this in mind, we were
filled with excitement and high hopes
about what our trip might bring. It was
December 2008 and my holidays finally
arrived so Rob and I left Western Australia
in search of our share of Victorian gold.
Upon arriving in Dunolly and armed with our new Minelab 4500 GPX detectors, we agreed to head out into the
surrounding bushland just around Dunolly itself. The goldfields in Victoria are a lot different to what we were used
to in Western Australia but they look great none-the-less with diggings and mullock heaps every-where we looked.
Deciding to work the diggings before we did any real prospecting proved to be a good decision as we found a few
small nuggets up to around six grams total. Returning to our campsite late that afternoon we made plans for the
next day.
The following day the weather was changing for the worst and our new 4500s got increasingly noisy due to bad
atmospherics. This made things a little more difficult especially with any quiet, deep sounds, so we decided to
take a break from prospecting and have a look at the local museum where there are replica nuggets on display of
those that have been found on the surrounding goldfields. There was even an anvil where the largest nugget in
the world, the “Welcome Stranger”, was broken up into smaller pieces and later melted down.
Across the road we spotted the detector shop “Gold Search Australia”,
owned by Tony Mills, who we had dealt with previously by phone. We asked
Tony about different machines he had available which got us thinking about the
purpose and use of each model, such as looking for gold in highly mineralised
ground or discriminator machines for use in the, the junky areas. He also talked
about what he considered to be neglected gold, that is, gold found in old deep
lead mines, trashy/junky areas, as well as old camp sites. Rod and I thought
about this over a cuppa and then, after a lengthy discussion, we decided to buy
a White’s GMT and have a crack at some of this “forgotten gold”. Setting out
the next morning with new enthusiasm regarding what we might find, we soon
arrived at an old camp site a mate had previously told us about. Rob had his
Minelab 4500 and I was using the new White’s GMT.
The area had some deep lead dumps on it which were just full of rubbish so we figured that with any luck we might
come across some of this “forgotten gold”. It didn’t take me very long to understand the functions and operation
of the White’s GMT and after checking some of Rob’s targets with the built-in discriminator, I soon realised the
advantages of using this detector. After about half an hour and discriminating lots of rubbish targets, I came across
our first piece of forgotten gold weighing around half an ounce. I was rapt to say the least and when I showed it
to Rob he just about fell over. It was obvious the White’s GMT detector worked because more gold nuggets kept
coming out from amongst the rubbish. The feeling of finding gold so early into the trip was amazing and with each
piece found we gave our mate who put us onto the spot a quiet ‘thanks mate, we owe you one’. He drinks Bourbon
so it was going to be the best bottle we could lay our hands on as a way of thanks. You’d be a mongrel not to,
wouldn’t you? After a few days we had found plenty more gold with much of it fantastic looking specimens of gold
in quartz. We couldn’t believe our luck and even though at the time we weren’t exactly sure how much gold we’d
found, we knew it was ounces and not just grams.
Over the course of our two week holiday to the Dunolly goldfields we found a total of 34 ounces of gold including
plenty of small bits that were hard pressed to register a weight on the scales. We will still use our Minelab 4500s
for highly mineralised ground in the goldfields as they are great machines but the White’s GMT has definitely
found a full-time home in our prospecting kit, especially around the trashy areas.
29
By BT
It’s no secret that the Whites MXT has been around
for a few years now but in that time it has been a
bit of a sleeper in Australia. In the United States
however it has gained a pretty good reputation
as a gold getting VLF detector. Recently I had the
opportunity to discover first hand if it could live up to
its reputation in our gold hunting environments.
Much of the MXT’s prospecting mode is based upon
the highly successful Whites GMT platform with
the use of Fast Auto Track and the legendary V-Sat
control.
This control does an excellent job at smoothing out threshold fluctuations caused by rapidly changing ground
conditions in highly variable ground types. Hook this up with dedicated Coin and Relic modes and a Salt switch
and you have a highly versatile machine capable of covering almost any type of gold, coin or relic hunting
scenario. There are a number of coils available for this machine but for my first outing I chose the 5.3 inch Eclipse
concentric. This coil is actually touted as a coin hunting coil by Whites but after some initial testing and witnessing
its amazing sensitivity on small gold and specimens, I reckoned it would be a winner in some of my old hard-hit
areas.
First stop was an area in the middle of Maryborough, Victoria, near some old surface workings. Because of the
V-Sat control I was able to run the gain, or sensitivity, very high. The V-Sat controls how fast the threshold
recovers from fluctuations caused by the ground changing from positive to negative or vice versa balance.
To put it simply it greatly reduces noisy operation in bad ground.
This control is exclusive to Whites machines and has never been copied to date. With the careful selection of the
right V-Sat level you can obtain a much higher gain or sensitivity setting than would otherwise be useable without
it. In other words when you have to drop the sensitivity on another machine to a level where you lose a large
amount of depth and sensitivity due to too much ground noise, on a Whites machine that incorporates V-Sat you
can retain much of the operational power by simply upping the V-Sat level. The V-Sat range is 1 to 7 then it shifts
to ‘Hyper Sat’. Hyper Sat is for use in extremely bad ground and will flatten out threshold fluctuations dramatically
but still give you a crisp discernable target response. So here I was running 10 on the gain and 7 on the V-Sat.
The ground noises were almost non-existent, the threshold was as smooth as silk and within 5 minutes I had my
first MXT piece of gold. How big? Don’t laugh, but it was a whopping 1/15th of a gram! But I was rapt because it
was a nice buzzy little signal that popped in from an inch or so deep. Very close by was an old detector hole that
had quite possibly yielded a much bigger chunk of the good stuff. I had gone over this bit of dug ground with my
other detector on numerous occasions and to say I was surprised when I ran the MXT over it and got two distinct
signals would be an understatement. I remember looking down at the ground and thinking “no way, there can’t
be any more signals here”.
At this point I was really expecting them to be ground noise from some strange hot rock, as there were a few
in the area, but from two inches down the first one was out, 0.75 grams of gold in quartz, with the next being a
sunbaker that had half a gram of spongy gold attached. Being able to smoothly run a high gain setting, retaining
good sensitivity and virtually eliminating ground noise fluctuations were definitely the keys to finding these two
pieces.
The following week saw me at an old reef area. Id also hit pretty hard in the past. First off I ran the standard 9.5
inch concentric coil just to see how it fared on gold. It too ran nice and stable although the donut design
which is becoming so popular with coil manufacturers these days, I found to be a pain in the proverbial when
swung around this rocky environment.
It was forever getting caught up with rocks and
sticks and brought my swings to an abrupt halt
when it did. Before changing it over I did snag a
small specie with 0.2 grams inside. The verdict:
an excellent coil on coins and relics but a bit
clumsy for prospecting. Changing back to the 5.3
saw me a happy camper once again and very
soon picking up another small specimen of gold
in quartz. I half expected this piece, which was
30
lying right on the surface, to produce a mineral sound but it stayed rock solid in response after a couple of passes
with the coil. After a quick crack with the geo pick I was rewarded with another small bit of about 0.3 grams.
Often with the MXT, when you pass over a small bit of rusted iron or steel in Tracking, you will notice the response
diminishes or changes quite markedly after just two or three sweeps of the coil. Gold will stay rock solid 99% of
the time. Minerals in a rock will do the same and change after three or four sweeps but gold in the rock will stay
solid. Be careful though because the MXT has a very aggressive and highly effective tracking system. A few
sweeps would be the maximum due to this fact. Repeated passes of the coil over a target in tracking mode are
a definite no-no. The MXT also needs to “see” the ground and should never be air tested in Track. Hold a target
in the air with tracking on and you will see a marked reduction and/or alteration in signal strength as it tracks into
the target.
My next target was a very faint signal I almost missed. When I dug
it out from about two inches down I was initially disappointed to
see what appeared to be a bit of rusted iron. I say disappointed
because the MXT’s prospecting mode has the best iron ID system
I have seen or used on any VLF machine to date. Ok, so there I
was with this supposed bit of rusty iron but it read 15 on the VDI
display and registered only a 10% probability of being iron. What’s
more the audio grunt never so much as whimpered. I quickly broke
it into several pieces to reveal the culprit.
It was actually a piece of iron oxide full of fine gold – a very tricky piece indeed that could quite easily fool anyone
just giving it a once over with the naked eye. I ended up getting another six more small bits of gold here for just
over a gram and another small specie of gold in pyrites. Not a fortune in anyone’s books but for such a hard hit
place I was suitably impressed.
Next up I wanted to see how the 10 x 6 DD Eclipse coil handled the really bad ground so I went to a spot where
the gully had been gutted out leaving heaps of really reactive hot and cold rocks (rising or dropping threshold
sounds when passed over) as well as red clays and other typically noisy minerals. How did it go?
Occasionally there was a false call but compared to other manufacturer’s machines it was chalk and cheese and
a place you could happily work in. Honestly, many other VLF’s would have struggled to run a sensitivity setting
higher than just 50%.The MXT was doing it effectively at around 80%. Right on top of a small gravelly rock pile I
got a solid signal that read 10% on the Probability meter. After picking it up I was greeted with 0.7 grams of gold
in ironstone. This is a hard machine to fool.
I had really punished this spot with my previous machine, so much so
that I reckon the wildlife in the area, trees included, breathed a sigh of
relief when I finished up there a number of months back. Last up was
one of my favourite places, Crystal Hills.
Due to the MXT’s fantastic discrimination in Prospecting mode I
reckoned the best area to try was going to be amongst the rubbish
and the particular spot I chose was full of it. Again I reverted to the 5.3
Eclipse and chose the Plus range of the gain to see how sensitive it
really was running flat out. I must have passed the coil over a dozen
Iron or bad targets when one finally sung out nice and clear with a low
Iron Probability of 10%. It was a bit of quartz and it screamed.
One smack of the hammer and there was 1.5 grams of sparkly gold and
some pyrites twinkling back at me. The V-Sat control takes it to another
level altogether making it absolutely unique amongst VLF gold detectors.
The worst the ground gets, the more this feature becomes appreciated. And
the Iron ID system is top notch providing the operator with an impressive
array of options for indentifying targets amongst junk via an easy-to read
LCD display.
In my opinion its one of the best and most controllable VLF gold detectors
available today.
31
I don't think I'd win any prizes for
guessing that there are quite a few
people in the detecting fraternity
quietly wondering how the new
pulse induction machine from
White's Electronincs stacks up on
the Australian goldfields. Well, after
several weeks of testing, I have to
say that the TDI Pro Oz-Series is the
goods. It was taken to a variety of
places with varying ground types and
it passed with flying colours. In fact,
I was amazed to see that in one particular area I never had to adjust the manual ground balance once during
an entire day's detecting, and that includes upon start up. Of course some places did require the occasional
rebalance due to changing mineralisation and I encountered one very bad area that forced me to rebalance
every 10 - 15 minutes, but considering the overall preformance, this wasn't an issue. The areas where I tested
the machine are ones I'm very familiar with having trialled nemerous detectors on them over the years. I find
this provides a rock-solid platform on which to gauge a new detector's ability.
All Pulse Induction coils: The new White's TDI Pro Oz-series will accept all pulse induction search coils
made by Coiltek, Nugget Finder and Minelab and after trialling just a few of the various sizes and shapes
available, I settled on the Coiltek 14 x 9 elliptical mono for the purpose of these field tests. I found this a great
combination and the pinpointing of targets on the narrowed front end of the 14" Inch was exceptional.
As with any new machine there is always an unavoidable learning curve in getting accustomed to its particular
operating features and the White's TDI Pro Oz-series was no exception, That said, it's not a difficult machine
to come to grips with. The first trial was at Tarnagulla and the spot chosen is lousy with false signals caused
by numerous pockets of heavily mineralised and variable clays, many of which are of an opposing ground
balance type to the ironstone-riddled ground that surrounds them. To date they have been impossible to
completely tune out with any machine. I've used and I was keen to see how the White's TDI Pro Oz-series
fared under these conditions. Well, after the inital ground balance check and a minor adjustment I was off and
it imediately apparent that the Oz-series was a different beast to its predecessor. Not only was it running with
a much more stable audio but I was even able to increase the gain from level 5 which I'd used on the original
American TDI Pro months earlier, to a new high of 8.
Reduced level of sharpness: The clay pocket signals were still present but at a significantly reduced level
of sharpness. Gone were the full-on signal sounds previously encountered here, replaced by a more gentle
mineral sounding entry and exit signal. The odd one one still gave an occasional false alarm but the overall
reduction in false signal occurrence was about 80%. Unfortunately, I didn't snag myself any gold at this spot
but considering the difficulty of the ground and the flogging it's had, I was happy with the overall preformance
of the White's TDI Pro Oz-series. Next on the list was a spot at Moliagul where some surfacing had carried
out on very hot ground. I had purposely left the ground balance settings on the detector unchanged from the
Tarnagulla site because I wanted to see how different this Moliagul ground was. Polar opposite would be an
apt description with the TDI howling like a dingo gone mad when the coil approached the ground. Aquick
turn of the course then a bit of an adjustment of the fine ground balance control but boy did it show just how
different two similar looking areas can be. The ground at Moliagul was much hotter than the trial area at
Tarnagulla and the gain control had to be lowered to around 6 to obtain more stable running of the TDI. As
covered more ground I encountered some areas that forced me to make minor adjustments to the ground
balance evey 10 minutes or so. Obviously underfoot there were some significant mineral changes taking
place, highlighting just how bad the Victorian goldfields are and why machines that can cut it here can cut it
anywhere. Again I went unrewarded for my efforts but was pleased to see that the TDI comfortably held its
own in an area reowned as tough to hunt in.
Clean looking gold: The third trial area was near Amherst. I'd been here a number times over the years and
found some really nice, clean looking gold in yellowish orange clay so I was hoping to pull a piece or two with
the new TDI Pro Oz-series to prove it up. I decided to detect up the diggings a bit where the old boys had
dug out some of the gold-bearing clays and rocks and left piled up portions of the poorer stuff untested. Upon
start up I was suprised at just how quiet the ground was and I didn't need to adjust the ground balance at all.
I quickly detected my first target which turned out to be an old .22 slug that had probably been fired at one of
the many rabbits that plagued the area a number of years back
32
A short time later I got another signal that sounded the same and was expecting another slug be after I'd dug
out about four inches of clay and stone, the signal was coming from a couple of bits of mangy quartz and clay.
There was no bullet in sight so, I dropped the congiomeration onto the tip of the 14" Inch mono and as soon
as I moved a piece of the quartz, the Pro let out a squeal that was unmistakable, It didn't take much cleaning
to reveal a nice little specimen containing a good show of visible gold. The first gold find with the new machine
is always a real buzz but it got better because roughly five minutes later I had another bit, this time a clean bit
of gold weighing about one gram.
Stopped for a breather: I detected for another hour
without luck and was making my way back to the car
when I stopped for a breather and a drink near an old
tree stump. I noticed the dirt and clay the old roots had
pushed up looked similar to that which the old timers had
dug out so I swung the coil half-heartedly over some of
it and got a signal; soft and weak but definitely a signal.
I dug out about three inches of clay near one of the
exposed roots and scanned it. The signal was there nice
and clear and within seconds I had the gold in my hand.
When I again waved the coil over the same area I got another signal which turned out to be a nice 2 grammer,
In the end I finished up detecting an area five meters square radiating out from the stump and wound up with
seven more pieces of clean gold. None were big but the final weigh in was a healthy 11 grams. My final test
site was on a hillside not far from some old reef workings.
I'd been detecting for about 45 minutes when I got a faint signal from a large bit of flat quartz lying in plain
view I flipped it over but the signal still sounded the same. I'd left my geo hammer back in the car so I found
a solid lump of rock and pounded it down on the quartz with my sunglasses psuhed tightly into my face to
protect my eyes.
Fast flying bits of razor sharp quartz can inflict some serious damage. More than once over the years, I've
gone to wipe away what I tjought was sweat on my forehead after preforming the task, oly to be greeted with
the sight of my own claret smeared across the palm of my hand. Sometimes you don't even feel it.
Sparkly bit of gold: Anyway, the smash out was successful and inside of one of the quartz bits was a nice
sparkly bit of gold weighing about half a gram.
As I made my way further up the slope I came across a pile of rocks the old timers had placed there while
digging out what must have been a small costean. I waved the coil over it and there was an unmistakable
signal so I dug a few rocks out of the way and waved the coil back over the small excavation but the target
was out. When I then passed the coil over a lump of mineralised quartz it screamed ans I immediately got that
tingle of anticipation you get when you know you've found gold.
There were a few cracks in this bit so an easy whack with the side of the pick quickly split in open to reveal
some very nice looking rough gold inside some equally good looking mineralised quartz. Another pass of the
coil over the pile produced another signal and in no time I was holding some smaller and finer gold in the
same quartz type. There were just a couple of grams in each specimen but they were two absolutely beautiful
little keepers courtesy of the TDI pro Oz-series, I was very pleased indeed.
In summary the new White's TDI Pro Oz-series handles our Aussie ground well. The occasional area can be
challenging but no more so than with other machines.
Its learning curve is not as severe as some with
a week or two spent on the business end being
all it should take for the average person to get
a handle on things. The availability of a huge
coil range from various manufacturers is a real
bonus.
The TDI's lithium-Ion battery pack is housed in
the detector itself doing away with the need for
back packs and annoying power leads dangling
about and getting caught up and breaking.
And at just about $2,400 there shouldn't be too
many complaints in the price department.
33
A U S T R A L I A
ADVANCED DETECTION SYSTEMS
Opposite the
Town Hall
YOU COULD STRIKE IT RICH
Hire a Detector from Gold Search Australia!
We have a choice of detectors available at the best rates
HIRE for ½ DAY, FULL DAY, WEEKLY or MONTHLY
We can supply accessories if needed Victorian Miners Rights Available
Tuition available on booking Accommodation is available in town
76 Broadway Dunolly, VIC 3472
BOOKINGS ARE ESSENTIAL - Phone 03 5468 1877
AUTHORISED AUSTRALIAN
WHITES DEALERS
www.northvicengines.com.au
17 Colgan Street, Cobram, Vic
email: Matthew@northvicengines.com.au
Prospectors Accommodation - All Rooms Air Conditioned – Ensuite
Camp Kitchen -- Swimming Pool - Rooms for 1 to 7 people
Owners -- Graham & Joy Ashton
1846 Maryborough Rd Dunolly Vic 3472 Tel: ( 03 ) 5468 1166
Email: info@dunollygoldentrianglemotel.com.au
Web: www.dunollygoldentrianglemotel.com.au
Detector Hire Available from Gold Search Australia

thedetectionspecialis ts

Transcription

Similar documents

WHY THE YAKTRAX PRO WORKS

Why The Yaktrax Pro Works

RubiCoil

Connaught Place Mohali

Today, every White`s metal

MXT - KZ RV

Spec Sheet

Arc Audio

DOS SD-STD-02.01 K12 L3 ASTM F2656 M50 P1

Experience the Freedom! - Custom Quick Release Pins