Stimpson Product Guide - Index Fasteners, Inc.

Transcription

The
Stimpson
Product Guide
EYELETS • GROMMETS & WASHERS • ATTACHING MACHINES
HOLE PLUGS • CE® RIVETS • SNAP FASTENERS • CLAMPS • FERRULES
CONTACTS • STAMPINGS • CONNECTORS • ARROWS • SHELLS • HOOKS
QUICK RIVETS • SPINNERS • SPOTS • TERMINALS • VENTS • CORNERS
Co.
Inc.
An Introduction
to the Stimpson Company,
established 1852...
For a purchase and sales transaction to be truly successful, all parties must benefit. We realize our
success depends on YOU, our Customer. Given the opportunity, we are prepared to do our part by
providing you with friendly, helpful sevice; by maintaining the largest inventories in the industry; and
by providing products unmatched for quality, supported by on-time delivery and attractive pricing.
Our goal is SUCCESS TOGETHER
New York Plant
SHOW BOOTH
Florida Plant
2
Copyright 2002 by Stimpson Co., Inc.
Product Index
Eyelets
An Introduction . . . . . . . . 10-13
Apparel . . . . . . . . . . . . . . 20-21
Envelope . . . . . . . . . . . . . 18-19
Funnel Flange & Tapped. . . . 27
GS® . . . . . . . . . . . . . . . . . 14-15
Looseleaf Binder . . . . . . . . . . 19
Polybag . . . . . . . . . . . . . . 18-19
Pre-coiled . . . . . . . . . . . . . . . 26
Shoe . . . . . . . . . . . . . . . . 16-17
Shoulder . . . . . . . . . . . . . 19,27
Tag . . . . . . . . . . . . . . . . . 18-19
Telescoping . . . . . . . . . 7,16-17
Terminal . . . . . . . . . . . . . . . . 26
PRODUCTION
Grommets
Oblong . . . . . . . . . . . . . . . . 8-9
Rolled Rim . . . . . . . . . . . . . . 8-9
Self-Piercing . . . . . . . . . . . . . . 6
Sheet Metal . . . . . . . . . . . . . 6-7
Hole Plugs
Electrical Knockout . . . . . 24-25
Special . . . . . . . . . . . . . . 24-25
Standard . . . . . . . . . . . . . 24-25
Tubing . . . . . . . . . . . . . . . 24-25
Rivets
Caps . . . . . . . . . . . . . . . . . . . 22
C-E® . . . . . . . . . . . . . . . . 22-23
Quick . . . . . . . . . . . . . . . . 22-23
Side Prong . . . . . . . . . . . 22-23
Spot . . . . . . . . . . . . . . . . . 22-23
MACHINING CENTER
E.D.M.
Greetings...In this catalog we have attempted to provide a representative
selection of the products that we manufacture every day. But, as you will see, the
possibilities are almost endless...And for this, WE THANK YOU, our customer.
Co.
Inc.
ISO 9001 Certified
900 SYLVAN AVE., BAYPORT, NY 11705-1097
PHONE: (631) 472-2000 • FAX: (631) 472-2425
Web Site: www.stimpson.com
E-Mail: customer_service@stimpson.com
Stimpson Products...helping our Customers make their
quality products that much better.
Snap Fasteners
Battery . . . . . . . . . . . . . . . . . 26
Belt . . . . . . . . . . . . . . . . . . . . 21
Envelope . . . . . . . . . . . . . . . 19
Ring . . . . . . . . . . . . . . . . . . . 20
Standard . . . . . . . . . . . . . . . . 21
Washers
Apparel . . . . . . . . . . . . . . 20-21
Industrial . . . . . . . . . . . . . 30-31
Neck . . . . . . . . . . . . . 6-7,16-17
Oblong . . . . . . . . . . . . . . . . 8-9
Screw . . . . . . . . . . . . . . . . . . 31
Sheet Metal . . . . . . . . . . . . . 6-7
Spur . . . . . . . . . . . . . . . . . . 8-9
Teeth . . . . . . . . . . . . . . . . . . 6-7
Terminal . . . . . . . . . . . . . . . . 27
Vent . . . . . . . . . . . . . . . . . 30-31
Additional Categories
Arrows, Hands and
Spinners . . . . . . . . . . 30-31
Clamps and Tips . . . . . . . 28-29
Contacts . . . . . . . . . . . . . . . . 27
Corners . . . . . . . . . . . . . . 28-29
Envelope Clasps . . . . . . . . . . 19
Fahnestock Clips . . . . . . . . . 26
Ferrules, Shells, Caps and
Cups . . . . . . . . . . . . . 28-29
Finishes . . . . . . . . . . . . . . . . . 5
Fuse Plugs Contacts . . . . . . 26
Government Contracts . . . . . 34
Hangers and Hooks . . . . 30-31
Machinery . . . . . . . . . . . . 32-33
Ring & Spade Terminals . . . 27
Vents . . . . . . . . . . . . . . . . 30-31
Stimpson’s Newest Items . . . 35
3
Stimpson makes the products you need.
Browsing through this catalog you will note the vast selection of products Stimpson has developed
over the many years of servicing our customers. It is, therefore, very likely that the part you are
looking for will already be available. However, if your requirement is for
a custom part, or you need a variation of an existing part, Stimpson tool
and die capabilities are unmatched in the industry. In many cases an
alteration to our existing tooling may be all that is necessary, resulting
in time and cost savings to you.
What about my choice of metals, colors and finishes?
METALS
Brass, Steel, Aluminum, Copper, Zinc, Gilding Metal and Stainless Steel are our most commonly
requested metals, though other less popular metals are often used.
COLORS
Choose from a broad spectrum of standard or custom colors with bulk painted or sprayed enamel
finishes. Anodized colors are available on aluminum eyelets and grommets.
4
Co.
Inc.
FINISHES
Whether your needs are for decorative or protective purposes, STIMPSON has
its own modern in-plant facilities for these popular processes:
NICKEL PLATING
LACQUERING
PASSIVATING
BRASS PLATING
BURNISHING
ENAMELING
ZINC PLATING
ANODIZING
SPRAYING
COPPER PLATING
MOLTEN TINNING
ANNEALING
ANTIQUE BRONZE PLATING
ELECTRO TIN PLATING
SLUSH COMPOUND
BLACK NICKEL PLATING
PHOSPHATING
CHEMICAL BLACKENING
5
WASHER
Co.
Sheet Metal Grommets
Inc.
Sheet Metal Grommets #00
SHEET METAL GROMMET
#0
PLAIN WASHER
Hole Size 3/16 ’ ’
FLG
can be used interchangeably with plain, teeth or neck washers.
OD
#1
TEETH WASHER
Hole Size 1/4’’
#1J
Hole Size 9/32’’
OD
#2
Hole Size 9/32’’
Hole Size 3/8’’
LUF
FLG
.425
LUF
.135
Plain Washers -
FLG
.545
ID
LUF
.175
MT
.012
PLAIN WASHER
#0 (C83)
LUF WASHER
TEETH
OD
OD
LUF
ID
.218
ID
OD
.460
Teeth Washers -
MTI D
SHOE EYELET
.009
ID
.289
OD
.546
MT
.010
FLAT FLANGE
ROLLED FLANGE
FLG
FLG
FLG
LUF
LUF
OD
OD
OD
OD
OD
ID
.290
ID
LUF
LUF
Neck Washers -
I DO D
SHOE EYELET
FLAT FLANGE QUICK RIVETS
FLG
OD
LUF
#2 (C85)
ID
.359
MT
.012
OD
.700
ID
.453
MT
.012
OD
.835
MT
.012
#1TW
#1TW
#2TW
OD
OD
.570
ID
.350
MT
.0115
OD
.680
ID
.350
MT
.014
OD
.680
MT
.014
ID
.468
OD
.840
MT
.012
ID
SHLD
A1197* (Size #0)
FLG
LUF
FLG
.425
#1 (C84)
LUH
A1340* (Size #1)
A1334 (Size #0)
FLAT FLANGE
OBLONG GROMMET & WASHER
LUF
LUF
MT
.125O D .010
FLG
FLGFLG LUF
.531
.100
FLG
HD
DIA
OD
OD
LG
OF HEAD
TENON
LG
LUF
FLG
LUF
TELESCOPING EYELET & NECK WASHERLG
LUF
LUF
OD
MT
.013
FLG
LUF
LUF
LUF
.215
telescoping, barrel
barrel
the hole with two entire parts.
SPOT RIVETS
SIDEto
PRONG
RIVETS setting, reinforces
FLG #00)
A1155* (Size
FLG
NECKPOST
WASHER
ROLLED
RIM
GROMMET
&
FLG
SPUR WASHER
OD
.700
SHANK
TEETH WASHER
DIA
SHOULDER
OD
OD
OD
TENON
LG
LUF
PLAIN WASHER
FLG
FLG
FLG
.815
SHLD
#OTW
FLG
LUF
FLAT FLANGE
MT
.0126
DIA
WITH OPEN
END
a firmer,
grasp,
particularly inHEAD
woven
materials.
LG
FLG tighter
LUF
SHEET METAL GROMMET
ID
.359
SHOULDER
FLAT FLANGE
LUF
OD
LUF
.263
FLG CE-RIVETS
ROLLED FLANGE
WITH CLOSED END
LUF
FLG
TEETH WASHER
FLG
OD
FLG
.680
OD
FLG
TELESCOPING EYELET & NECK WASHER
MT
.012
#1 (C84)
LUF
FLG
ROLLED FLANGE
LUF
.185
basic reinforcement,
providing
FLG support for the grommet setting.
FLG
#00 (C82)
LUF
FLG
.687
ID
FLAT FLANGE
NECK WASHER
FLG
MT
.009
FLG
.562
MT
.010
A3630* (Size #2)
LUF
LUF
LUF
A1340* (Size #1)
HEAD DIA
LG
LUF
OF
PRONGS
OD
.080
MT
.009
FLG
.705
LUF
.105
LG
OF
PRONGS
MT
FLG
.705
.010
LUF
.105
FLG
.840
MT
.010
LUF
.095
MT
.013
Self-Piercing Grommets and Washers - will pierce most fabrics without
FLG
SCORED EYELETS
* INDICATES
ID
ROLLED FLANGE
O
D
SHOE EYELET
STANDARD HOLE PLUG
SHOULDER
Self PiercingOGrommet
and Washer
D
FLG
ID
SHOULDER
OD
FLG
FLG
FLG
ELECTRICAL
KNOCKOUT
PLUG
pre-punching a hole, while setting the grommet and washer
in the same
action.
LUF
LUF
OD
FLG
SHLD
SPG/SPW #0
LG
LUF
Hole Size
1/4”
SPG/SPW #1L LG
SPG/SPW #1
FLG
Hole Size 5/16 ”
Hole Size 5/16 ”
HEAD DIA
HEAD DIA.
TENON
LG
FLGO
D
OD
TENON
FLGLG
SPG/SPW #2
SHLD
SPG/SPW #3
Hole Size 3/8”
Hole Size 7/16 ”
OD
OD
FLAT FLANGE
LUF
LUF
HEAD
HEIGHT
FLG
LUF
HEAD
THICKNESS
LUF
LENGTH
OVERALL
LENGTH
OVERALL
LUF
ID
OD
LUF
OD
SPG
O DSPW
ID
FLG
.550
ID
.337
LUF
.165
OD
.575
MTO D
.015
MT
.011
SPG
SPW
FLG
.630
ID
.400
LUF
.200
OD
.655
MT
.015
MT
.011
FLG
LUF
MT
TUBING HOLE PLUG
SPG
.015
.275
.630
ID
OD
MT
SPW
.400
.655
.011
HEAD
DIA.
6
ROLLED RIM GROMMET &
SPUR WASHER
LENGTH
OVERALL
FLG
HEAD
HEIGHT
SPG
SPW
FLG
.750
ID
.437
LUF
.200
OD
.770
MT
.015
MT
.011
SPG
SPW
FLG
.970
ID
.546
LUF
.185
OD
.970
MT
.015
MT
.011
with Plain, Teeth and Neck Washers
Stimpson Grommets and Washers are made from Brass, Aluminum and Zinc, and are available in base metal or with
popular finishes such as Nickel or Dull Black Chemical. Many sizes are also available in Stainless Steel.
#2J
FLG
.840
LUF
.260
MT
.016
FLG
.970
LUF
.295
OD
.835
ID
.530
#2JTW
ID
.468
OD
.840
FLG
.840
LUF
.095
FLG
1.050
MT
.016
MT
.013
ID
.545
MT
.013
ID
.585
MT
.013
LUF
.125
LUF
LUF
.330
ID
.740
MT
.013
MT
.016
FLG
1.750
OD
1.205
ID
.720
MT
.016
OD
1.190
MT
.0135
ID
.875
FLG
1.050
LUF
.125
MT
.020
OD
1.828
MT
.020
PACKAGING: Normally Grommets
and Washers are shipped in bulk,
however they may also be packed in
1, 5 or 10 gross boxes at additional
cost. Self-Piercing Grommets and
Washers are packed 500 pieces to a
box at no additional cost.
MT
.017
AVAILABILITY: Stimpson maintains
the largest inventory of Grommets
and Washers in the industry. In most
cases, even orders calling for popular
finishes will be in stock.
A3721* (Size #4)
MT
.014
LUF
.232
#6 (C288)
#5TW
OD
1.050
GOVERNMENT CONTRACTS:
Stimpson Grommets and Washers
conform to U.S. Military specifications
and may be ordered by Military Type
and Class Numbers.
MT
.015
TEETH WASHER
All dimensions are in inches.
Photos approximate actual size.
Hole size is approximate measurement after setting.
MT= metal thickness
Telescoping Eyelets with Neck Washers
OD
G
Hole Size 13/16 ’ ’
#5 (C88)
OD
1.062
ID
.593
A3655* (Size #3)
FLG
.945
FLG
1.220
#4TW
OD
.945
PLAIN WASHER
MT
.016
#4 (C87)
OD
.955
#6
Hole Size 5/8’’’
LUF
.374
#3TW
A3630* (Size #2)
AL GROMMET
MT
.014
#3 (C86)
MT
.0126
#5
Hole Size 1/2’’
Hole Size 7/16 ’ ’ ’
#2 (C85)
ID
.453
#4
#3
Hole Size 3/8’’
ID
OD
ID
The eyelet alternative in a telescoping setting. Additional sizes are available.
ASHER
FLAT FLANGE
A1445/A1155*
Hole Size .273
A1998/A1197*
Hole Size .270
A1333/A1334
Hole Size .274
FLG
FLG
LUF
A1181/A1197*
Hole Size .177
LUF
LUF
LUF
G
FLG
FLANGE
LG
SHOE EYELET
FLG
LUF
MT
OD
.403/.425
.210/.125
.0135/.010
FLG
LUF
MT
SHOULDER
FLG
.535/.531
.155/.100
.010/.010
FLG
LUF
MT
.540/.531
.120/.100
.016/.010
FLG
LUF
MT
.545/.562
.145/.080
.013/.009
7
LUF
FLG
ID
Rolled Rim Grommets with Spur Washers
ID
LUF
OD
FLAT FLANGE
COPING EYELET & NECK WASHER
OD
Made from Brass, Zinc, and inFLG
many sizes, Stainless Steel, Stimpson Rolled Rim Grommets and Spur Washers interlock,
with their teeth grasping the material, providing a rugged, unyielding setting. Also available in popular finishes such as
NickelROLLED
and Dull
Black Chemical.
RIM GROMMET &
FLG
LUF
LUF
SPUR WASHER
LUF
Hole Size 9/32”
OD
FLG
FLG
#0
#0L
FLG Hole Size 9/32”
Hole Size 9/32”
#0XL
LUF
LUF
SHOE EYELET
SHOULDER
FLG
ID
FLG
OD
Hole Size 9/16 ”
#4TENON
Grommet Dimensions
LUF
.175
Washer
SHLD Dimensions
ID LG
OD
.345
.645
FLG
.670
OD
OD
LG
Hole Size 5/8”
FLG
.670
MT
.016
MT
.016
ID
OD
#5
ID
.345
Grommet Dimensions
LUF
.240
Washer Dimensions
OD
.645
MT
.016
FLG
.670
MT
.016
ID
.345
Hole Size 3/4”
Grommet Dimensions
LUF
.300
Washer Dimensions
OD
.645
#6
MT
.016
MT
.016
LUF
OD
Grommet Dimensions
LUF
.320
Washer Dimensions
ID
OD
.645
1.120
FLG
1.120
MT
.020
FLG
1.285
ID
.777
MT
.020
Grommet Dimensions
LUF
.380
Washer Dimensions
OD
1.270
FLG
A670/C501
ID
.275 X .930
8
Grommet Dimensions
Washer Dimensions
ID
.875
Grommet Dimensions
LUF
.420
Washer Dimensions
OD
1.505
MT
.025
MT
.025
Inc.
Oblong Grommets & Washers
ID
OD
FLG
1.315 X .665
MT
.021
FLG
1.535
All dimensions are in inches.
MT= metal thickness
LUF
Co.
MT
.021
A1496/C714
A671/C264
LUF
.225
OD
.625 X 1.290
FLG
2.015 X .915
ID
.420 X 1.532
Grommet Dimensions
Washer Dimensions
LUF
.332
OD
.915 X 2.010
FLG
2.375 X .965
ID
.468 X 1.812
Grommet Dimensions
Washer Dimensions
LUF
.308
OD
.968 X 2.375
Stimpson maintains the largest inventory of Grommets and Washers in the industry.
All Stimpson Grommets and Washers meet with the latest Military and Commercial Specifications.
#1
Hole Size 13/32”
FLG
.790
ID
.455
Hole Size 7/16 ”
Grommet Dimensions
LUF
.205
Washer Dimensions
OD
.790
MT
.016
FLG
.890
MT
.016
ID
.512
#7
Hole Size 29/32”
FLG
1.725
ID
1.062
#2
Hole Size 7/16”
Grommet Dimensions
LUF
.255
Washer Dimensions
OD
.890
FLG
.890
MT
.018
ID
.512
MT
.018
#8
Hole Size 1-3/32”
Grommet Dimensions
LUF
.446
Washer Dimensions
OD
1.725
FLG
1.865
MT
.020
MT
.020
ID
1.195
Grommet Dimensions
LUF
.465
Washer Dimensions
OD
1.910
#2XL
Grommet Dimensions
LUF
.348
Washer Dimensions
OD
.890
#3
Hole Size 15/32”
MT
.018
FLG
.970
MT
.018
ID
Hole Size 1-1/2”
ID
1.560
MT
.020
MT
.020
MT
D 5 2 8 2 / D 5 2 74
FLG
2.390
MT
.025
Grommet Dimensions
LUF
.255
Washer Dimensions
OD
Grommet Dimensions
LUF
.355
Washer Dimensions
OD
2.360
MT
.020
MT
.020
Stimpson Oblong Grommets and Washers can be made from Brass,
Aluminum, Zinc or Stainless Steel. Our most popular sizes are displayed below.
A591/C189
FLG
1.125 X .690
ID
.400 X .800
Grommet Dimensions
Washer Dimensions
A 3 5 37 / C 8 2 9
A113/C118
LUF
.222
OD
.685 X 1.125
FLG
1.406 X .565
ID
.312 X 1.187
Grommet Dimensions
Washer Dimensions
LUF
.269
OD
.562 X 1.437
FLG
1.405 X 1.035
ID
.925 X .575
Grommet Dimensions
LUF
.285
Washer Dimensions
OD
1.405 X 1.035
MT
.014
MT
.014
9
An
Introduction to
Eyelets
Co.
Inc.
Terminology
HEAD DIA.
The
Flange
Small, inexpensive, and often
not seen, STIMPSON
EYELETS are an indispensable
ingredient in the successful
production of most every
manufacturing industry. On the
pages that follow, we will introduce you to some of the over
3,800 sizes and styles we ship
worldwide. For more information regarding STIMPSON
EYELETS, please request our
Eyelet Catalog.
We now provide the following “Introduction to Stimpson
Eyelets” to acquaint you with their many characteristics,
and we invite you to speak with our Customer Service
Representatives about your eyeleting needs. STIMPSON
EYELETS are the low cost, reliable solution to
thousands of fastening requirements.
Standard Tolerances
SHEET METAL GROMMET
SHOE EYELET
Measuring the Eyelet
FLG.
Flange Diameter (FLG)
+/-.005”
Outside Diameter
+/-.002”
Length Under Flange
+/-.005”
usually .005”
smaller than mean
inside diameter
LUF
Length
Under
Flange
(LUF)
Outside
Diameter
(OD)
Hole Diameter
NECK WASHER
Inside Diameter
(ID)
Settings
LUF.
SHEET METAL GROMMET
FLG.
Tolerance
Flange Diameter
Hole Diameter
LENGTH
OVERALL
The Hole
(Piercing)
No matter where you are, you’re always surrounded by
STIMPSON EYELETS. They’re all over your home; in
your appliances, electrical circuits, tools, children’s toys,
clothing, shoes, sneakers, furniture, lighting fixtures,
outlets and switches, heating units, alarms, and more.
They’ll surround you in your car, on planes, trains,
buses...even in space shuttles; and when you go to
work, shopping or the gym, you’ll find them there also.
Dimensions
The Barrel
HEAD
The
HEIGHT
Wall
FLG.
ROLL
SCORED
FLARED
LUF
There are three basic types of settings...Roll (or coil), Scored,
or Flared. The most common is the Roll which provides a
smooth, rounded, uniform surface. A Scored setting divides
the end of the barrel into equal segments to provide extra grip
strength in soft materials. A Flared setting is commonly used
in PC boards and provides a funnel appearance often used
for soldering.
10
NECK WASHER
T
The Flange
Rolled Flange: A finished and decorative appearance make the Rolled Flange
a popular choice. When set, the under
edges of the flange lend well to obtaining a tight setting by gripping the work.
Flat Flange: Usually selected when
minimum above surface projection is
desired, or where a recessed hole is
used for clearance requirements. In soft
or thin materials they may be chosen
to avoid the flange cutting through the
material.
Bell Flange: Also ideal for easy
acceptance of leads. The rounded inner
contour reduces abrasion where wire,
cord, or rope is passed through the
length of the barrel.
Embossed Flange: Combines the contour of the rolled and flat flange to provide the holding power of the roll with a
flat outer edge to reduce the chance of
cutting through the work.
Clipped Flange: Where space constraints require virtually no flange, the
usual flange area is clipped (trimmed)
as close as possible to the outside
diameter of the barrel.
The Barrel
Straight Barrel: Straight barrel eyelets
are the most commonly used. The
holes in the materials to be fastened
together are usually the same size, and
the straight barrel aids in alignment.
Tapered Barrel: The barrel has a
definite tapering down of diameter from
just under the flange to the bottom end.
Desirable primarily in fastening soft
materials since the taper provides an
easy insertion into the work.
Shoulder Eyelets: So called because
the barrel consists of two distinct diameters resulting in a stepped shoulder
effect. Used to join parts with dissimilar
hole sizes; or with the upper (larger)
barrel portion acting as a spacer.
Funnel Flange: Popular in the electronics industry for easy insertion of
leads, and/or trapping of solder flow on
PC boards. Used for costume jewelry
where gem stones are glued into the
funnel contour.
Custom Flanges: A wide variety of
custom shape flanges are available for
unique applications. Most of our standard eyelets can be altered to provide
the configuration you may need.
Closed End: A closed end can be used
to fasten different pieces together while
eliminating the pass through of air, dirt,
grease, or other foreign matter. To set,
the end of the barrel is bumped to collapse tightly against the work pieces.
Also commonly used as a press fit into
materials as a hole reinforcement to
seat dowel, rods, etc.
Oblong and Square Barrels: In
addition to the most common barrel
styles described above, Oblong and
Square Barrels are popular for
specialized applications.
Coil/Grip Ranges
No two applications being alike, it’s impossible to offer specific standards as to how much barrel length there should be
to obtain proper coil/grip. Too much length can result in
barrel buckling (collapsing). Too little may mean loss of grip
strength. Rigid materials usually need less; soft flexible
Pre-Coiled: Normally used as spacers,
they are frequently molded in place in
rubber or plastics.
materials will need more, as a wide coil (to grip more material) is desirable. If parts fastened are exposed to unusual
stresses, extra length is usually desirable, even though
materials may be rigid in nature.
As a general guide in preliminary selection, the following should be helpful:
Eyelet Diameter:
3/64” to 1/16”
3/32” to 1/8”
5/32” to 3/16”
1/4” or more
Additional Length:
1/32”
1/16”
3/32”
1/8”
For final determination as to proper length, after selecting an eyelet let us make actual settings for your functional testing. Or, send samples of your components and we’ll select an eyelet and forward the settings for your review.
11
Stimpson eyelets, over 3,800
FLAT FLANGE
BELL FLANGE
12
CLOSED END
SHOULDER
FUNNEL FLANGE
sizes and styles to choose from
ROLLED FLANGE
SQUARE BARREL
TELESCOPING
OBLONG
13
OUTSIDE
DIAMETER
GS® Eyelets
Co.
Stimpson “Graduated Size” (GS®)
Eyelets are as their name indicates...
a system of standard eyelets incorporating a series of graduated increases
(1/32 of an inch) in both length and
outside barrel diameters. The result is
72 eyelets which will meet the
requirements of most general purpose
eyeleting applications.
Inc.
LENGTH
UNDER
FLANGE
FLANGE
DIAMETER
Measurement in Inches
Nominal Hole Size
Outside Diameter
Flange Diameter
Metal Thickness
Length Under Flange
Nominal Hole Size
Outside Diameter
Flange Diameter
Metal Thickness
Length Under Flange
Nominal Hole Size
Outside Diameter
Flange Diameter
Metal Thickness
Length Under Flange
Outside Diameter
Flange Diameter
Metal Thickness
Length Under Flange
.010
3/32
.093
4/32
3.18
.125
5/32
GS 2-6
3.96
.156
6/32
GS 3-5
GS 3-4
2.36
.093
4/32
GS 4-3
3/32
3.18
.125
5/32
GS 4-4
2.36
.093
4/32
GS 2-7
4.75
.187
7/32
GS 3-6
3.96
.156
6/32
GS 4-5
3/32
2.36
.093
4/32
.125
5/32
5.56
.219
GS 3-7
4.75
.187
7/32
GS 4-6
3.18
3.96
.156
6/32
GS 3-8
5.56
.219
8/32
6.35
.250
GS 4-8
GS 4-7
.125
5/32
3.96
4.75
.187
7/32
.156
6/32
GS 6-5
4.75
5.56
.219
8/32
GS 5-7
GS 5-6
GS 5-5
GS 6-4
GS 6-3
.183
3.18
GS 5-4
GS 5-3
6/32
.187
7/32
5.56
.250
GS 5-8
.219
8/32
GS 6-7
GS 6-6
6.35
6.35
.250
GS 6-8
.290
.0105
3/32
.011
Flange Diameter
.385
3/32
.093
4/32
2.36
3/32
2.36
3.18
.125
5/32
GS 7-4
.093
4/32
GS 8-3
.246
.011
2.36
GS 7-3
.215
8/32
Metal Thickness
2.36
GS 3-3
.152
Nominal Hole Size
Length Under Flange
GS 2-5
.200
.0095
.340
Outside Diameter
3/32
.121
Flange Diameter
Length Under Flange
.062
4/32
7/32
Metal Thickness
GS 2-4
.150
.009
Nominal Hole Size
Outside Diameter
1.58
.089
.245
Nominal Hole Size
2/32
3/32
Flange Diameter
Length Under Flange
GS 2-3
.105
.007
5/32
Metal Thickness
14
.059
Nominal Hole Size
Outside Diameter
GS 2-2
2/32
3.18
4/32
3.18
.156
6/32
.125
5/32
3.96
.156
6/32
5/32
3.96
.187
7/32
4.75
.156
6/32
4.75
5.56
.219
8/32
GS 7-7
.187
7/32
5.56
.187
7/32
5.56
6.35
.250
GS 7-8
.219
8/32
GS 8-7
GS 8-6
GS 8-5
.125
4.75
GS 7-6
GS 7-5
GS 8-4
.093
3.96
6.35
.250
GS 8-8
.219
8/32
6.35
.250
INS. DIM.
INSIDE DIM.INS. DIM.
OUTSIDE
INSIDE
DIM.DIM.
OUTSIDE DIM.
ED FLANGE
CLOSED END
INSIDE DIM.
OUTSIDE DIM.
OUTSIDE DIM.
OUTSIDE DIM.
In addition to our Rolled Flange GS® Eyelets shown in the chart below,
GS® Eyelets can also be made with a Flat Flange, or with a Closed End.
ROLLED FLANGE
ROLLED
WITH
OPENFLANGE
END
LG. DIA.
ROLLED FLANGE
ROLLED
FLANGEWITH OPEN END
ROLLED FLANGE
WITH
CLOSEDEND
END
WITH CLOSED
FLATFLANGE
FLANGE
FLAT
WITHOPEN
OPENEND
END
WITH
WITH OPEN END
FLG. DIA.
FLG. DIA.
FLG. DIA.
LUF
LUF
LUF
O.D.
FLG. DIA.
FLG. DIA.
LUF
O.D.
O.D.
FLG. DIA.
LUF
LUF
O.D.
ROLLED FLANGE
WITH OPEN END
FLAT FLANGE
WITH OPEN END
LUF
O.D.
O.D.
O.D.
Measurement in Millimeters
GS® Eyelets are most commonly requested in brass,
and are normally inventoried in large quantities.
GS® Eyelets can also be made from steel, stainless
steel, aluminum and copper.
1.50
2.67
ALL PHOTOS APPROXIMATE ACTUAL SIZE.
.178
QUICK RIVETS
CE-RIVETS
HEAD DIA.
POST
GS 3-11
GS 3-10
GS 3-9
GS 3-12
FLG DIA.
FLG DIA.
2.26
O.D.
SHANK
DIA.LUF
O.D.
9/32
O.D.
LUH
.281
10/32
7.14
.312
7.92
11/32
12/32
9.53
LUH
.375
FLG. DIA.
.229
LUF
FLG. DIA.
.281
7.14
10/32
SPOT RIVETS
.312
7.92
11/32
HD.
DIA.
.344
12/32
9.53
.375
HD.
DIA.
HEAD DIA.
LG. OF HEAD
9/32
7.14
.281
10/32
LG.
OF
PRONGS
7.92
.312
11/32
.344
12/32
9.53
.375
Outside Diameter
.241
Metal Thickness
7.14
.281
10/32
7.92
.312
11/32
.344
12/32
Outside Diameter
.254
Metal Thickness
6.22
9.53
GS 6-14
GS 6-13
.375
4.65
Outside Diameter
.267
Metal Thickness
13/32
10.31
.406
14/32
11.10
.437
GS 7-14
GS 7-13
7.14
.281
10/32
7.92
.312
11/32
SKETCH NO.
USED ON:
9/32
7.14
.281
DATE:
10/32
7.92
12/32
.312
11/32
CHECKED:
9.53
.375
.344
10.31
.406
5.46
USED ON:
9.53
.375
13/32
11.10
.437
GS 8-14
DATE:
12/32
14/32
GS 8-13
DRAWN:
8.74
13/32
GS 8-12
GS 8-11
GS 8-10
GS 8-9
8.74
.344
10.31
.406
14/32
11.10
.279
USED ON:
9.78
.437
SKETCH NO.
Outside Diameter
Flange Diameter
Metal Thickness
Length Under Flange
6.25
CHECKED:
Flange Diameter
Length Under Flange
8.64
9/32
Flange Diameter
Length Under Flange
GS 7-12
GS 7-11
GS 7-10
GS 7-9
8.74
Flange Diameter
3.86
7.37
9/32
O.D.
Length Under Flange
LG.
OF
PRONGS
LG.
OF
PRONGS
GS 6-12
GS 6-11
GS 6-10
GS 6-9
LG.
8.74
OF
PRONGS
3.07
HEAD DIA.
OF HEAD
GSLG.
5-12
GS 5-11
GS 5-10
GS 5-9
8.74
Flange Diameter
Metal Thickness
Length Under Flange
5.08
SPOT RIVETS
9/32
Outside Diameter
O.D.
GS 4-12
GS 4-11
GS 4-10
GS 4-9
8.74
.344
LUF
3.81
LUF
HANK
DIA.
Length Under Flange
POST
FLG DIA.
LUF
QUICK RIVETS
Metal Thickness
QUICK RIVETS
CE-RIVETS
HEAD DIA.
Outside Diameter
Flange Diameter
.279
Outside Diameter
SK
Flange Diameter
Metal Thickness
Length Under Flange
15
Shoe Eyelets
Co.
....Always a step Ahead
Inc.
Stimpson Shoe Eyelets provide the variety of sizes,
styles
andHOLE
fashion
STANDARD
PLUG finishes needed to complement
your fine footwear styling.
Trade Size
#00
TUBING HOLE PLUG
ELECTRICAL KNOCKOUT PLUG
HEAD
DIA.
HEAD DIA.
HEAD DIA.
LENGTH
OVERALL
HEAD
HEIGHT
HEAD
HEIGHT
HEAD
THICKNESS
LENGTH
OVERALL
LENGTH
OVERALL
#1 ROLL
A1928 Aluminum
SHOE EYELET
ROLLED FLANGE
FLG. DIA.
FLG.
Trade Size
FLAT FLANGE
#1 FLG. OD
Trade Size
#3
FLG.
#3 ROLL
A2014 Aluminum
SHEET METAL GROMMET
LUF
Hexagon &
Boot Eyelets
SMALL HEXAGON
A3660 Brass
OD
.185
4.70
LUF
.175
4.45
FLG
.330
8.38
LUF
.142
3.61
FLG
.345
8.76
MT
.016
0.41
MT
.011
0.28
LARGE HEXAGON LONG
LARGE HEXAGON HVY
A3467 Brass NECK WASHER
A2626 Brass
#3 ROLL
A2235 Brass & Steel
TENON
LG.
#3 SCORED
A2227 Aluminum
LUF
.122
3.10
OUTSIDE DIM.
OD
FLG MT
.158
.253 .015
4.01
6.43 0.38
LUF
.135
3.43
FLG MT
.250 .008
6.35 0.20
LUF
.166
4.22
FLG MT
.375 .0126
9.53 0.32
OD
.228
5.79
LUF
.230
5.84
FLG
.380
9.65
OD
.157
3.99
OUTSIDE DIM.
LUF
.122
3.10
FLG
.253
6.43
MT
.015
0.38
MT
.011
0.28
BOOT
MILITARY
MILITARY BOOT LONG
A2639 Aluminum
A3476 Aluminum
OD
.221/.216
5.61/5.49
LUF FLG MT
.190 .468 .012
4.83 11.89 0.30
OD
.230/.221
5.84/5.61
LUF
.220
5.59
EX. HVY LOGGING BOOT
A3603 Brass
FLG.
OD
.224
5.69
16
LUF FLG MT
.212 .463 .012
5.38 11.76 0.30
FLG.
OD
.225/.220
5.72/5.59
LUFLUF.
FLG MT
.190 .468 .014
4.83 11.89 0.36
OD
.297/.285
7.54/7.24
LUF
LUF FLG MT
.198 .490 .016
5.03 12.45 0.41
OD
.297/.285
7.54/7.24
FLG.
LUF FLG MT
.153 .343 .011
3.89 SHLD.
8.71 0.28
LG.
O.D.
Trade Size
#2
O.D.
#3 SCORED
A1202 Brass & Steel
OD
.201
5.11
LUF
.155
3.94
FLG
.345
8.76
MT
.016
0.41
#2 ROLL
A2187 Aluminum
OD
.177
4.50
LUF
.138
3.51
FLG
.300
7.62
MT
.016
0.41
#3 LONG ROLL
A2263 Aluminum
OD
.158
4.01
LUF
.135
3.43
FLG MT
.250 .008
6.35 0.20
OD
.158
4.01
LUF
.150
3.81
FLG
.255
6.48
MT
.015
0.38
LARGE HEXAGON
INSIDE DIM.
A3293 Brass
INSIDE DIM. AA HEXAGON
MEDIUM HEXAGON
A2096 Brass
A3680 Brass
OD
.226/.216
5.74/5.49
OD
.204
5.18
TEETH WASHER
PLAIN WASHER
OD
.157
3.99
FLG.
LUF
NOTES REGARDING DIMENSIONS:
O.D.
O.D.OD
OD = Outside Diameter.
Eyelets with two
measurements indicate a tapered barrel.
LUF = Length Under Flange
FLG = Flange Diameter
MT = Metal Thickness
1st Line = Inches
2nd Line = Millimeters
O.D.
#1 SCORED
A2000 Aluminum
SHOULDER
.208/.192
5.28/4.88
LUF
LUF
#1 ROLL
A2282 Brass & Steel
LUF FLG MT
.218 .490 .016
5.54 12.45LUF
0.41
FLG
.390
9.91
MT
.018
0.46
Telescoping Eyelets
and Neck Washers
Invisible
Eyelets
INCHES
MILLIMETERS
#00 ROLL
A1967 Aluminum
OD
.277
7.04
LUF FLG MT
.157 .490 .016
3.99 12.45 0.41
Trade Size
AA
AA LONG ROLL
A2030 Aluminum
OD
.220
5.59
LUF
.188
4.78
FLG MT
.390 .015
9.91 0.38
#1 SCORED
A2041 Brass & Steel
OD
.204
5.18
LUF
.153
3.89
FLG MT
.343 .011
8.71 0.28
#2 ROLL
A1387 Brass & Steel
OD
.173
4.39
LUF
.142
3.61
FLG
.300
7.62
MT
.012
0.30
#3 LONG SCORED
A2265 Aluminum
OD
.158
4.01
LUF
.150
3.81
FLG
.255
6.48
MT
.015
0.38
#1 EYELET
A1928 Aluminum
#1 INVISIBLE
A2601 Aluminum
OD
.230/.209
5.84/5.31
LUF
.135
3.43
FLG
.333
8.46
MT
.014
0.36
#00 ROLL
A2400 Brass & Steel
OD
.275
6.99
LUF FLG MT
.150 .495 .011
3.81 12.57 0.28
#2 INVISIBLE
A3639 Aluminum
OD
.184/.156
4.67/3.96
LUF
.136
3.45
FLG
.298
7.57
MT
.014
0.36
#00 LONG ROLL
A 3625 Aluminum
OD
.282
7.16
LUF FLG MT
.182 .493 .016
4.62 12.52 0.41
AA ROLL SHORT
A2690 Aluminum
AA ROLL
A2269 Aluminum
OD
.220
5.59
LUF
.125
3.18
FLG
.390
9.91
OD
.220
5.59
LUF
.168
4.27
FLG
.390
9.91
OD
.215
5.46
LUF
.188
4.78
FLG MT
.388 .010
9.86 0.25
OD
.227/.220
5.77/5.59
LUF
.220
5.59
FLG MT
.385 .018
9.78 0.46
MT
.015
0.38
AA LONG ROLL
A2617 Brass & Steel
#1 FLAT SCORED
A3115 Brass & Steel
OD
.202
5.13
LUF
.180
4.57
FLG MT
.360 .009
9.14 0.23
#2 SCORED
A2101 Aluminum
OD
.177
4.50
LUF
.138
3.51
FLG
.300
7.62
MT
.016
0.41
MT
.015
0.38
AA EX. LONG ROLL
A3138 Aluminum
#1 LONG ROLL
A1979 Aluminum
OD
.200/.190
5.08/4.83
LUF
.182
4.62
FLG
.343
8.71
MT
.016
0.41
#2 SCORED
A2058 Brass & Steel
OD
.183
4.65
LUF
.142
3.61
FLG
.300
7.62
MT
.010
0.25
#3 LONG SCORED
A2647 Brass & Steel
OD
.156
3.96
LUF
.160
4.06
FLG
.255
6.48
LUF
.130
3.30
FLG MT
.298 .0085
7.57 0.22
#00 LONG ROLL
A2620 Brass & Steel
OD
.280/.272
7.11/6.91
LUF FLG MT
.180 .488 .012
4.57 12.40 0.30
OD
.215
5.46
LUF
.150
3.81
FLG
.390
9.91
OD
.228
5.79
LUF
.217
5.51
FLG MT
.390 .012
9.91 0.30
MT
.008
0.20
AA EX. LONG ROLL
A3433 Brass & Steel
#1 LONG ROLL
A2380 Brass & Steel
OD
.204
5.18
LUF
.185
4.70
FLG MT
.345 .009
8.76 0.23
#2 LONG ROLL
A2343 Aluminum
OD
.180
4.57
LUF
.165
4.19
FLG
.300
7.62
MT
.013
0.33
AA LONG EYELET
A2030 Aluminum
OD
.220
5.59
LUF
.168
4.27
MT
.015
0.38
OD
.220
5.59
LUF
.188
4.78
LUF FLG MT
.095 .435 .013
2.41 11.05 0.33
OD
.255
6.48
LUF FLG MT
.095 .435 .013
2.41 11.05 0.33
LUF
.142
3.61
FLG
.345
8.76
MT
.016
0.41
OD
.200/.190
5.08/4.83
LUF
.182
4.62
FLG
.343
8.71
MT
.016
0.41
FLG
.390
9.91
#1 WASHER
A2217 Aluminum
AA WASHER
A2578 Aluminum
OD
.240
6.10
LUF
.090
2.29
FLG
.388
9.86
MT
.012
0.30
OD
.240
6.10
LUF
.090
2.29
FLG
.388
9.86
MT
.012
0.30
OD
.255
6.48
#3 INVISIBLE
A2050 Aluminum
OD
.157/.132
3.99/3.35
FLG
.390
9.91
MT
.015
0.38
AA WASHER
A2578 Aluminum
LUF
.124
3.15
FLG
.238
6.05
MT
.016
0.41
#00 EX. LONG ROLL
A3654 Aluminum
OD
.280
7.11
LUF FLG MT
.210 .495 .016
5.33 12.57 0.41
AA FLAT
A3575 Brass
AA ROLL
A2605 Brass & Steel
AA EYELET
A2269 Aluminum
OD
.208/.192
5.28/4.88
#1 WASHER
A2217 Aluminum
OD
.181/.150
4.60/3.81
Trade Size
#4 & #5
MT
.010
0.25
#1 LONG EYELET
A1979 Aluminum
#2 INVISIBLE
A2179 Brass & Steel
OD
.235/.220
5.97/5.59
LUF FLG MT
.190 .400 .013
4.83 10.16 0.33
LUF
.188
4.78
FLG MT
.390 .015
9.91 0.38
#1 EX. LONG ROLL
A1685 Aluminum
OD
.200
5.08
LUF
.212
5.38
FLG
.343
8.71
MT
.016
0.41
#2 LONG ROLL
A2372 Brass & Steel
OD
.180
4.57
LUF
.162
4.11
FLG
.303
7.70
MT
.009
0.23
#4 ROLL
A2013 Brass & Steel
OD
.157
3.99
LUF
.102
2.59
FLG
.235
5.97
MT
.010
0.25
#404 EYELET
A1983 Alum. & Brass
OD
.268/.212
6.81/5.38
LUF FLG MT
.165 .455 .016
4.19 11.56 0.41
#202 WASHER
A2384 Alum. & Brass
OD
.255
6.48
OD
.175/.146
4.45/3.71
LUF
.124
3.15
FLG
.255
6.48
MT
.016
0.41
J.L. ROLL
A1942 Aluminum
OD
.321/.288
8.15/7.32
LUF FLG MT
.222 .515 .018
5.64 13.08 0.46
AA SCORED
A2272 Aluminum
AA LONG SCORED
A2236 Aluminum
OD
.220
5.59
#3 INVISIBLE
A2068 Aluminum
LUF FLG MT
.119 .448 .013
3.02 11.38 0.33
OD
.220
5.59
LUF
.168
4.27
FLG MT
.390 .015
9.91 0.38
OD
.215
5.46
LUF
.190
4.83
FLG MT
.388 .010
9.86 0.25
AA LONG SCORED
A2711 Brass & Steel
#1 LONG SCORED
A2374 Aluminum
OD
.200/.190
5.08/4.83
LUF
.187
4.75
FLG
.343
8.71
MT
.016
0.41
#2 EX. LONG ROLL
A2627 Brass & Steel
OD
.180
4.57
LUF
.190
4.83
FLG
.300
7.62
MT
.013
0.33
#3 INVISIBLE
A2557 Brass & Steel
OD
.166/.134
4.22/3.40
LUF
.130
3.30
FLG MT
.255 .009
6.48 0.23
J.L. ROLL
A3165 Brass & Steel
OD
.290/.270
7.37/6.86
LUF FLG MT
.225 .510 .013
5.72 12.95 0.33
AA SCORED
A289 Brass & Steel
OD
.215
5.46
LUF
.165
4.19
FLG
.390
9.91
MT
.008
0.20
OD
.215
5.46
LUF
.215
5.46
FLG
.388
9.86
MT
.010
0.25
AA EX. LONG SCORED
A3592 Brass & Steel
#1 LONG SCORED
A2379 Brass & Steel
OD
.204
5.18
LUF
.185
4.70
FLG
.345
8.76
MT
.009
0.23
#2 LONG SCORED
A2367 Brass & Steel
OD
.180
4.57
LUF
.162
4.11
FLG
.303
7.70
MT
.009
0.23
#4 LONG ROLL
A2180 Aluminum
#5 ROLL
A2232 Aluminum
OD
.158
4.01
OD
.127
3.23
LUF
.122
3.10
FLG
.235
5.97
MT
.012
0.30
#505 EYELET
A2095 Aluminum
LUF
.105
2.67
FLG
.195
4.95
MT
.012
0.30
J.L. EYELET
A1942 Aluminum
OD
.307/.295
7.80/7.49
LUF FLG MT
.150 .537 .016
3.81 13.64 0.41
OD
.321/.288
8.15/7.32
LUF FLG MT
.222 .515 .018
5.64 13.08 0.46
OD
.335
8.51
LUF FLG MT
.100 .545 .009
2.54 13.84 0.23
OD
.335
8.51
LUF FLG MT
.100 .545 .009
2.54 13.84 0.23
#303 WASHER
A1950 Aluminum
#303 WASHER
A1950 Aluminum
17
For Tags,
Envelopes,
Binders,
Polybags
“Tag and Polybag” Flat Flange Eyelets
A3730
Zinc
OD
.194/.188
4.93/4.78
LUF
.089
2.26
FLG
.256
6.50
A1951
Zinc
MT
.0115
2.92
OD
.195/.190
4.95/4.83
LUF
.093
2.36
FLG
.254
6.45
A168
Aluminum, Brass, Zinc
MT
.0115
.292
OD
.196
4.98
LUF
.095
2.41
FLG
.250
6.35
MT
.008
.203
A34
Brass & Zinc
OD
.215/.205
5.46/5.21
LUF
.092
2.34
Designed and manufactured to run in today’s high
speed machinery, Stimpson eyelets provide the exacting
tolerances needed to insure uninterrupted production.
These proven industry standards have been developed
over time to meet almost any production requirement.
Our GS® Eyelets, Grommets & Washers, CE® Rivets
and Corners provide the complete package of fastener
products for your industry.
Co.
Inc.
TUBING HOLE PLUG
TUBING HOLE PLUG
TUBING HOLE PLUG
HEAD
ELECTRICAL
KNOCKOUT DIMENSIONS:
PLUG
NOTES REGARDING
HEAD DIA. Diameter. Eyelets with two
OD = Outside
HEAD DIA.
OD measurements
indicate a tapered barrel.
LUF = Length
Under Flange
HEAD DIA.
FLG = Flange Diameter
HEAD
HEAD MT = Metal Thickness
HEIGHT
HEAD
HEAD
THICKNESS
1st Line = Inches LENGTH
HEIGHT
THICKNESS
HEAD
LENGTH
OVERALL
HEAD
HEIGHT
DIA.
HEAD
DIA.
HEAD
DIA.
LENGTH
OVERALL
LENGTH
OVERALL
LENGTH
OVERALL
OVERALL
THICKNESS
LENGTH
OVERALL
Measuring the Eyelet...
FLANGE
ROLLED
ROLLED
FLANGE
ROLLED
FLANGE
ROLLED FLANGE
FLAT
FLANGE
FLAT
FLANGE
FLANGE
FLAT
SHOULDER
SHOULDER
SHOULDER
SHOULDER
FLAT FLANGE
FLG.
FLG.
FLG.
FLG.
FLG.
FLG.
FLG.
FLG.
FLG.
SHLD.
O.D.
O.D.
O.D.
O.D.
O.D.
O.D.
PLAIN WASHER
PLAIN WASHER
PLAIN WASHER
OUTSIDE DIM.
OUTSIDE DIM.
OUTSIDE DIM.
18
SHLD.
SHLD.LG.
LG. LG.
LUF
LUF
LUF
LUF
LUF
LUF
TENON
TENON
TENON
LG. LG.
LG.
INSIDE DIM.
O.D. O.D.
O.D.
Supporting product lines
found elsewhere in this catalog...
TEETH WASHER
TEETH WASHER
TEETH WASHER
OUTSIDE DIM.
OUTSIDE DIM.
OUTSIDE DIM.
ALL PHOTOS ARE APPROXIMATE ACTUAL SIZE.
INSIDE DIM.
O.D. O.D.
O.D.
INSIDE DIM.
INSIDE DIM.
GROMMETS & WASHERS PGS. 6-9
FLG
.330
8.38
MT
.008
.203
A2491
Brass, Steel, Zinc
OD
.245
6.22
LUF
.095
2.41
FLG
.324
8.23
A35
Aluminum, Brass, Steel,
Zinc
MT
.010
.254
OD
.260/.250
6.60/6.35
“Button and
String
Envelope”
Eyelets
LUF
.132
3.35
FLG
.375
9.53
MT
.008
.203
A2658
Aluminum, Brass, Steel
OD
.341
8.66
A1403
Brass (scored)
OD
.148/.140
3.76/3.56
LUF
.149
3.78
FLG
.218
5.54
LUF
.115
2.92
FLG
.450
11.43
MT
.008
.203
A22
Brass & Zinc
MT
.007
.178
Rolled Flange Eyelets
for Ribbons, Folders,
Financial and Legal
Documents
OD
.148/.140
3.76/3.56
LUF
.149
3.78
FLG
.218
5.54
LUF
.145
3.68
FLG
.312
7.92
MT
.007
.178
MT
.008
.203
Shoulder Eyelets
for
Looseleaf Binders
Envelope Snaps and Clasps
D4980
Snap Set
GS® EYELETS PGS. 14-15
OD
.342
8.69
LUF
.092
2.34
FLG
.460
11.68
MT
.008
.203
A38
Brass & Zinc
OD
.343
8.71
A1119
Brass & Zinc (scored)
A942
Zinc
OD
.185
4.70
A36
Zinc
OD
.151/.147
3.84/3.73
LUF
.117
2.97
FLG
.225
5.72
MT
.008
.203
A211
Zinc
OD
.185
4.70
LUF
.147
3.73
FLG
.285
7.24
MT
.010
.254
A3417
Steel
OD
.204/.176
5.18/4.47
Shldr
FLG
Lg
.375 .357
9.53 9.07
D5689
CE® RIVETS PGS. 22-23
LUF
.131
3.33
FLG
.468
11.89
A558
Brass & Zinc
MT
.009
.229
OD
.356
9.04
OD
.148/.140
3.76/3.56
LUF
.148
3.76
FLG
.218
5.54
MT
.008
.203
LUF
.182
4.62
D2756
Shldr
OD
FLG
Lg
.237/.178 .375 .329
6.02/4.52 9.53 8.36
MT
.010
.254
FLG
.285
7.24
OD
.151/.147
3.84/3.73
LUF
.117
2.97
FLG
.225
5.72
MT
.008
.203
A740
A737
Brass, Steel, Zinc
OD
.185/.175
4.70/4.45
FLG
.475
12.07
A3577
Brass
A3576
Brass
MT
.010
.254
OD
.185
4.70
A3634
Steel
Tenon
Lg
MT
.062 .012
1.57 .305
LUF
.110
2.79
LUF
.102
2.59
FLG
.285
7.24
MT
.009
.229
A2145
Brass & Steel
Tenon
Lg
MT
.062 .014
1.57 .356
Shldr
OD
FLG
Lg
.237/.180 .375 .495
6.02/4.57 9.53 12.57
Tenon
Lg
MT
.094 .0145
2.39 .368
D4756
CORNERS PGS. 28-29
19
Eyelets for
the Apparel
Industry
Industry
Standards
A2058
Brass & Steel
OD
.183
4.65
LUF
.142
3.61
FLG
.300
7.62
ANTIQUE BRONZE
JAPANNING
C62
ID
.218
5.54
OD
.375
9.53
ID
.218
5.54
Most Snap Fasteners are available in both brass and steel,
with varying sized posts to accommodate material thickness.
Popular finishes include nickel and dull black chemical.
CAP
Stimpson Ring Snaps conform to MIL-F-10884, MS 27980 and
MS 27981.
Please see page 19 for Envelope Snaps and page 26 for
Battery Snaps, and page 35 for the latest additions to this
product line.
ATTACHED SNAP SET
20
LUF
.145
3.68
FLG
.312
7.92
MT
.008
0.20
OD
.215
5.46
LUF
.160
4.06
C63
OD
.375
9.53
FLG
.330
8.38
ID
.188
4.78
OD
.224
5.69
MT
.008
0.20
LUF
.212
5.38
FLG
.390
9.91
MT
.013
0.33
C790
OD
.375
9.53
ID
.220
5.59
FLG
.463
11.76
OD
.463
11.76
A2727
Brass
A3467
Brass
MT
.011
0.28
FLG
.390
9.91
MT
.012
0.30
OD
.225
5.72
LUF
.220
5.59
FLG
.510
12.95
MT
.014
0.36
SET D4617
SET D4902
D4543
D4861
Cap
Diameter
.598
15.19
Length
Under Cap
.177
4.50
D4511
(20 Line)
Cap
Diameter
.510
12.95
Length
Under Cap
.142
3.61
D4858
SET D4862
(20 Line Long)
D4861
Cap
Diameter
.510
12.95
Length
Under Cap
.142
3.61
D4858
D4547
D4859
D4859
D4629
D4902
D4862
STUD
SOCKET
POST
LUF
.175
4.45
LUF
.165
4.19
A3624
Aluminum
A3660
Brass
OD
.185
4.70
OD
.215
5.46
SOCKET
MATERIAL
MATERIAL
OD
.185
4.70
(24 Line)
The combinations displayed are a representation of the variety
of quality Snap Fasteners offered by Stimpson.
STUD
MT
.008
0.20
Ring Snap Sets
Snap Fasteners
CAP
FLG
.312
7.92
C62
Popular
Fashion
1st Line = Inches
LUF
.145
3.68
A289
A3607
Aluminum
Ruffled
Flange
Washers
ANODIZED
OD
.185
4.70
MT
.010
0.25
From Industry Standards, dressed-up with
popular finishes such as nickel, brass or
shades of antique bronze...to decorative
flanges anodized in 30 eye-catching colors...
the choice is yours.
PLATING
A942
POST
Head
Diameter
.562
14.27
Length
Under Head
.239
6.07
Head
Diameter
.495
12.57
Length
Under Head
.179
4.55
Head
Diameter
.495
12.57
Length
Under Head
.234
5.94
A618
OD
.273
6.93
OD
.275
6.99
LUF
.185
4.70
FLG
.450
11.43
A2983
Aluminum
LUF
.150
3.81
FLG
.495
12.57
A500
MT
.008
0.20
OD
.332
8.43
A2917
Aluminum
MT
.0115
0.29
OD
.332
8.43
LUF
.205
5.21
C83
ID
.289
7.34
LUF
.185
4.70
FLG
.593
15.06
FLG
.593
15.06
MT
.012
0.30
MT
.010
0.25
OD
.332
8.43
ID
.359
9.12
OD
.413
10.49
A2917
Brass
LUF
.205
5.21
C84
OD
.546
13.87
A928
Aluminum, Brass, Zinc
FLG
.593
15.06
LUF
.250
6.35
ID
.359
9.12
MT
.014
0.36
OD
.175
4.45
MT
.012
0.30
OD
.318
8.08
C85
LUF
.135
3.43
OD
.700
17.78
ID
.453
11.51
FLG
.860X.395
21.84X10.03
Co.
MT
.016
0.41
SET D1934
SET D4579
D1934
D1934
(16 Line - Brass)
D1934
FLG
.250
6.35
MT
.012
0.30
OD
.835
21.21
LUF
.165
4.19
FLG
.540
13.72
OD
.955
24.26
MT
.009
0.23
LUF
.155
3.94
OD
.264
6.71
LUF
.150
3.81
FLG
.500
12.70
MT
.013
0.33
A1129
Brass
MT
.013
0.33
Inc.
Cap
Height
.125
3.18
(16 Line - Steel)
Cap
Diameter
.400
10.16
D1934
LUF
.170
4.32
FLG
.593
15.06
OD
1.500
38.10
MT
.010
0.25
LUF
.180
4.57
SET D1975
(18 Line - Brass)
Cap
Diameter
.450
11.43
D1934
SET D5222
SET D4498
D1934
D4326
(16 Line - Brass)
Cap
Height
.135
3.43
Cap
Diameter
.400
10.16
D1997
Cap
Height
.125
3.18
Cap
Diameter
.395
10.03
D1997
D1934
D1997
D1997
D1934
D1983
D1934
D1997
D4514
Head
Diameter
.437
11.10
Length
Under Head
.257
6.53
Head
Diameter
.325
8.26
MT
.013
0.33
(16 Line - Steel)
D2041
Length
Under Head
.265
6.73
FLG
1.937
49.20
Belt Snap Sets
D1975
Cap
Height
.125
3.18
OD
.332
8.43
D1934
Head
Diameter
.325
8.26
FLG
1.312
33.32
A2893
Brass
Standard Snap Sets
Cap
Diameter
.400
10.16
LUF
.158
4.01
A2799
Low Brass & Steel
A330
Brass
OD
.673X.190
17.09X4.83
A1124
Brass
A2158
Brass
A1303
Brass
C84
OD
.700
17.78
FLG
.750
19.05
Special Designer
Length
Under Head
.265
6.73
Head
Diameter
.345
8.76
Length
Under Head
.285
7.24
Head
Diameter
.345
8.76
Cap
Height
.145
3.68
Length
Under Head
.310
7.87
21
C-E® Rivets
O.D.
O.D.
O.D.
QUICK RIVETS
CE-RIVETS
C-E®
Rivets are made from brass and steel. They can
FLG DIA.
be plated in a nickel, brass, antique
bronze or a variety of other
finishes. Designed for today’s light to medium riveting
O.D.
LUF
applications, C-E® Rivets
are uniform, strong and coil better
LUF
than conventional tubular rivets. A full line of
foot, electric
and pneumatic machines support their application.
HEAD DIA.
SHANK
DIA.
LUH
POST
O.D.
FLG. DIA.
Rivet Caps Available for C-E 100, C-E 123, C-E 125
SPOT RIVETS
series, rivet caps add strength and provide a more finished
FLG. DIA.
appearance. HD.
HEAD DIA.
DIA.
Caps
may be hand fed toLUF
the bottom of set tool.
LG. OF HEAD
SPUR WASHER
FLG. DIA.
SPUR WASHER
LG.
OF
PRONGS
LG.
DOF
5416
PRONGS
D4285
For use
INSIDE
DIM.® 100
w/C-E
For use
w/C-E® 123
D3995
OUTSIDE DIM.
For use
w/C-E® 125
FLG. DIA.
LUF
LUF
FLG. DIA.
FLG. DIA.
ROLLED FLANGE
WITH OPEN END
FLAT FLANGE
WITH OPEN END
LUF
LUF
FLG. DIA.
INS. DIM.
with cap
LUF
OUTSIDE DIM.
INSIDE DIM.
LUF
Quick Rivets
INS. DIM.
O.D.
OUTSIDE DIM.
O.D.
INSIDE DIM.
OUTSIDE DIM.
OUTSIDE DIM.
ROLLED FLANGE
WITH CLOSED END
ROLLED FLANGE
WITH OPEN END
FLAT FLANGE
WITH OPEN END
FLG. DIA.
FLG. DIA.
ROLLED FLANGE
WITH CLOSED END
FLG. DIA.
1st Line = Inches
without cap
FLG. DIA.
FLG. DIA.
LUF
D2391
ROLLED FLANGE
FLG. DIA.
WITH OPEN END
FLAT FLANGE
WITH OPEN END
LUF
FLG. DIA.
LUF
QUICK RIVETS
LUFO.D.
LUF
POST
O.D.
CAP
FLG DIA.
O.D.
O.D.
DRAWN:
DATE:
O.D.
LUF
LUF
O.D.
FLG. DIA.
POST
HEAD DIA.
FLG DIA.
O.D.
LUF
O.D.
LUF
FLG
.233
MT
.008
A1179
A2053
OD
.111/.095
FLG
.210
LUF
.270
MT
.010
OD
.111/.095
FLG
.281
MT
.010
Lg of
Prongs
.145
MT
.018
LUF
.275
LUF
Side Prong and Spot Rivets
LUH
LUF
LUH
HEAD DIA.DIA.
LUF
.115
QUICK RIVETS
CE-RIVETS
HEAD DIA.
SHANK
DIA.
SHANK
OD
.125
O.D.
CHECKED:
CE-RIVETS
O.D.
LUF
Stimpson Quick Rivets are ideal for quick, simple
fastening/joining of light
weight materials. Easy to
SKETCH NO.
USED ON:
use, these parts can be collapsed by use of a
hammer or inexpensive hand machine through a
pre-punched hole. For production quantity usage,
automatic
feed machines are available for feeding
QUICK RIVETS
one or both parts. Available in most sizes in both
POST
brass and steel, they can be plated in a variety of
FLG DIA.
finishes to meet your requirements.
FLG. DIA.
FLG. DIA.
O.D.
O.D.
P587
LG.
OF
PRONGS
P456
SPOTRIVETS
RIVETS
SPOT
HD.
HD.
DIA.
DIA.
HEAD
DIA.DIA.
HEAD
LG.OF
OF HEAD
HEAD
LG.
LG.
LG.
OF
OF
PRONGS
PRONGS
LG.
LG.
OF
OF
PRONGS
PRONGS
Stimpson Side Prong and Spot Rivets are made
from steel and brass and can be plated in a variety of finishes to meet your needs. Most of these
items can be furnished in varying lengths and
special design heads showing trademarks, monograms, etc. can be made to order. The following
is a sampling of the types of Side Prong and Spot
Rivets which are available.
22
CHECKED:
USED ON:
SKETCH NO.
HD
DIA
.094
HD
DIA
.120
Lg of
Head
.094
Lg of
Prongs
.125
P453
Lg of
Prongs
.138
MT
.015
MT
.018
HD
DIA
.126
HD
DIA
.120
Lg of
Head
.172
P471
Lg of
Prongs
.155
MT
.018
C-E® 100 Series (roll setting)
C-E 100 5/32
Shk Dia
.120
3.05
Head Dia
.218
5.54
C-E 100 4/16
C-E 100 7/32
LUH
.156
3.96
Shk Dia
.120
3.05
Head Dia
.218
5.54
LUH
.218
5.54
C-E 75 2/16
C-E® 75
Series
(roll setting)
Shk Dia
.120
3.05
Head Dia
.218
5.54
C-E 100 5/16
LUH
.250
6.35
Shk Dia
.120
3.05
Head Dia
.218
5.54
Head Dia
.190
4.83
LUH
.125
3.18
Shk Dia
.091
2.31
Head Dia
.190
4.83
LUH
.187
4.75
Shk Dia
.091
2.31
Head Dia
.190
4.83
LUH
.250
6.35
Shk Dia
.091
2.31
Head Dia
.190
4.83
LUH
.312
7.92
Shk Dia
.120
3.05
Head Dia
.218
5.54
LUH
.375
9.53
Shk Dia
.120
3.05
Head Dia
.218
5.54
LUH
.437
11.10
Shk Dia
.120
3.05
Head Dia
.218
5.54
LUH
.500
12.70
Shk Dia
.120
3.05
Head Dia
.218
5.54
LUH
.562
14.27
Shk Dia
.142
3.61
Head Dia
.312
7.92
LUH
.250
6.35
Shk Dia
.142
3.61
Head Dia
.312
7.92
LUH
.312
7.92
Shk Dia
.142
3.61
Head Dia
.312
7.92
LUH
.375
9.53
Shk Dia
.142
3.61
Head Dia
.312
7.92
LUH
.437
11.10
C-E 100 6/16
LUH
.312
7.92
C-E® 125
Series
(roll setting)
Shk Dia
.142
3.61
Head Dia
.312
7.92
C-E 125 4/16
LUH
.187
4.75
Shk Dia
.142
3.61
Head Dia
.312
7.92
C-E 125 5/16
LUH
.250
6.35
Shk Dia
.142
3.61
Head Dia
.312
7.92
C-E 123 5/16
C-E 125 6/16
LUH
.312
7.92
Shk Dia
.142
3.61
Head Dia
.312
7.92
C-E 100 8/16
C-E 100 7/16
C-E 123 4/16
C-E 123
Series
(scored setting)
C-E 125 7/16
LUH
.375
9.53
Shk Dia
.142
3.61
Head Dia
.312
7.92
A1411
P591
HD
DIA
.160
HD
DIA
.150
Lg of
Head
.160
Lg of
Prongs
.250
P414
Lg of
Prongs
.187
LUF
.342
FLG
.280
A3103
MT
.008
OD
.130/.118
MT
.017
HD
DIA
.178
HD
DIA
.219
Lg of
Head
.312
Lg of
Prongs
var
P583
Lg of
Prongs
.312
LUF
.342
FLG
.270
MT
.030
MT
.025
HD
DIA
.190
HD
DIA
.263
Lg of
Head
.312
Lg of
Prongs
var
P425
Lg of
Prongs
.230
LUF
.134
A3036
MT
.008
OD
.130/.118
P403
P400
MT
.025
C-E 123 7/16
C-E 125 8/16
LUH
.437
11.10
Shk Dia
.142
3.61
Head Dia
.312
7.92
C-E 125 9/16
LUH
.500
12.70
Shk Dia
.142
3.61
Head Dia
.312
7.92
LUH
.562
14.27
D5414
Inc.
OD
.165
OD
.130/.118
C-E 100 9/16
C-E 123 6/16
D3048
Co.
C-E 75 5/16
C-E 75 4/16
Shk Dia
.091
2.31
®
C-E 125 3/16
C-E 75 3/16
LUF
.337
FLG
.406
MT
.018
HD
DIA
.200
HD
DIA
.262
Lg of
Head
.375
Lg of
Prongs
var
P410
Lg of
Prongs
var
MT
.008
OD
.165
LUF
.120
A3027
MT
.013
OD
.126/.118
P407
MT
var
FLG
.330
LUF
.490
MT
var
HD
DIA
.250
HD
DIA
.312
Lg of
Head
.605
FLG
MT
.285 .0105
Lg of
Prongs
.505
P426
Lg of
Prongs
.250
MT
.008
D5238
OD
.126/.118
P473
MT
var
FLG
.360
LUF
.475
FLG
.312
D5234
MT
.0105
OD
.130/.118
MT
.018
HD
DIA
.255
HD
DIA
.500
Lg of
Head
.422
Lg of
Prongs
.250
P592
Lg of
Prongs
.312
FLG
.312
MT
.008
Lg of
Prongs
var
MT
.025
P411
P455
MT
var
LUF
.325
MT
.025
MT
.020
HD
DIA
.310
HD
DIA
.500
Lg of
Head
.385
P569
Lg of
Prongs
.344
MT
.020
23
OD
OD
OD
SIDE PRONG RIVETS
Co.
FLG
Inc.
HD
Hole Plugs
SPOT RIVETS
Hole Dia
1/8
HD
DIA
LG
your OF
need
PRONGS
With
minor
HEAD DIA
Most of our Hole Plugs can be made from brass, steel and #1050 Carbon Steel, as
LG
requires. Other metals, such as Stainless Steel,
areOF
available for special situations.
LG OF HEAD
LUF
PRONGS
tooling
modifications
most
parts
can
be
furnished
stamped
with your logo, with a different hole
OD
size in head, or with one or LUF
more prongs removed.
LG
Standard
Hole
STANDARD HOLE PLUG
PlugsELECTRICAL KNOCKOUT PLUG
FLG
SHANK
DIA
LUF
FLG
D4290
Hole Dia
1
HEAD DIA
STANDARD HOLE PLUG
Head Ht
1/16
Hole Dia
7/16
Thk of Work
1/32 to 1/16
D2783
D4036
Hole Dia
1
L Overall
15/64
Head Ht
5/64
L Overall
1/4
Thk of Work
3/32 to 1/8
LUH
Head Dia
1-9/64
OD
LUF
HEAD DIA
Head Ht
3/32
Head Dia
1-9/64
L Overall
21/64
HEAD DIA.
Head Ht
3/32
L Overall
5/16
D3632
Hole Dia
1-1/2
HEAD DIA.
HEAD DIA
FLG
Thk of Work
1/32 to 3/32
Head Dia
21/64
Head Dia
21/32
OF
LG
With a fax of your print and/or
details of your application, OF
we will be pleased to recommend
PRONGS
CE-RIVETS
PRONGS
a Standard or Special
Hole
Plug
appropriate
for
your
application.
OD
ommet and Washer
Thk of Work
3/64 to 5/64
HEAD DIA
DIA for display on these pages. However, if you
We’ve
chosen some of our most popular Hole Plugs
QUICK RIVETS
SIDE PRONG RIVETS
can’t find one to fit your requirements,
don’t be concerned for we have overSPOT
300RIVETS
additional Hole
LG OF HEAD
Plugs to choose from. In addition, new Hole Plugs are continually being developed to meet our
customers’ special
LUFFLGapplications (see page 35 for examples).
ROLLED FLANGE
WITH OPEN END
D3159
Thk of Work
1/32 to 1/16
FLG
LUF
HEAD
SIDE PRONG RIVETS
HEIGHT
HEAD
HEIGHT
SPOT RIVETS
LENGTH
OVERALL
ID
OD
HD
DIA
HEAD HEAD
THICKNESS
THICKNESS
LENGTH
OVERALL
OVERALL
Head Dia
1-41/64
HEAD DIA
Tubing
Hole
Plugs
LG OF HEAD
TUBING HOLE PLUG
LG
OF
PRONGS
Electrical
Knockout
Plugs
Head Dia
25/64
LENGTH
OVERALL
Head Ht
3/32
L Overall
9/16
HEAD
HEIGHT
D3683
HEAD DIA.
HEAD
THICKNESS
TUBING HOLE PLUG
All dimensions are in inches
HEAD
ALL PHOTOS APPROXIMATE ACTUAL DIA.
SIZE
LENGTH
OVERALL
HEAD
HEIGHT
D3720
Elect KO Size 1/2
LENGTH
OVERALL
LENGTH
OVERALL
24
Tube Out Dia
25/64
LENGTH
OVERALL
HEAD
HEIGHT
L Overall
13/32
D4167
HEAD
DIA.
HEAD
DIA.
Head Ht
3/32
Tube Ins Dia
1/4 to 9/32
TUBING HOLE PLUG
LG
OF
PRONGS
OLE PLUG
DIA
LENGTH
LENGTH
OVERALL
Head Dia
1-5/64
Head Thk
1/16
D3833
Elect KO Size 3/4
L Overall
23/64
Head Dia
1-1/4
Stimpson
Special
Hole
Plugs
Head Thk
1/16
Elect KO Size 1
L Overall
5/16
D4110
Special Character
Turned in Legs
Thk of Wk
1/32 to 1/16
Head Dia & Ht
21/32-5/64
Head Dia
1-1/2
Hole Dia
1/2
L Overall
7/32
Head Thk
5/64
L Overall
11/32
D4603
Special Character
Prong Variation
Thk of Wk
1/16 to 3/32
Head Dia & Ht
59/64-5/64
Hole Dia
3/4
L Overall
19/64
Hole Dia
3/16
D2707
Head Dia
11/32
Head Ht
5/64
Hole Dia
1/2
Head Dia
21/32
Hole Dia
7/32
Thk of Work
1/64 to1/16
D3161
Head Dia
17/32
L Overall
13/64
Hole Dia
1
Head Dia
1-9/64
Thk of Work
3/64 to 9/64
Head Ht
3/32
Hole Dia
9/16
Thk of Work
1/32 to 1/16
Head Ht
5/64
D4653
L Overall
9/32
Head Dia
1-13/16
Head Ht
1/16
Head Ht
7/64
Head Dia
17/32
Head Dia
1-5/16
Head Ht
3/32
Head Ht
5/64
Head Dia
1-15/16
Thk of Wk
Head Dia & Ht
1/32 to 3/32 23/32-1/16
L Overall
19/64
Head Dia
59/64
Thk of Work
1/32 to 1/8
Hole Dia
1-1/4
D2690
Head Ht
5/64
Head Dia
17/32
Head Ht
1/16
Head Ht
1/16
Hole Dia
3/8
Hole Dia
7/8
Head Dia
1-1/16
D3463
Head Ht
5/64
D3868
Head Ht
5/64
D3103
Head Ht
1/8
L Overall
3/4
Head Ht
1/16
D3560
L Overall
15/64
Thk of Work
1/16 to 3/32
Head Ht
1/16
L Overall
19/64
Thk of Work
3/64 to 1/8
L Overall
13/32
L Overall
5/16
D5608
Tube Out Dia
Head Dia
1-9/16 sq
D3924
Thk of Work
1/32 to 3/64
Thk of Work
1/32 to 1/16
Tube Ins Dia
Tube Out Dia
1
1-13/32 Square
Head Ht
9/64
L Overall
9/16
D4455
Elect KO Size 1-1/2
Head Thk
5/64
Head Dia
1-1/16
Head Dia
1-9/16
D3031
Head Ht
7/32
Hole Dia
7/8
L Overall
1/4
D4855
Head Dia
1/2
L Overall
15/64
Hole Dia
1-3/8
Head Dia
2-1/4
Head Dia
63/64
Hole Dia
3/8
Thk of Work
1/32 to 3/32
L Overall
11/32
L Overall
11/32
L Overall
25/64
Head Ht
1/16
D4286
Hole Dia
2
Tube Ins Dia
7/8
Thk of Work
3/64 to 1/16
Thk of Work
1/16 to 3/32
Head Ht
3/32
Thk of Work
1/32 to 3/32
D3005
Head Dia
1/2
L Overall
1/4
L Overall
19/64
Head Dia
1-7/16
Head Ht
3/32
Thk of Work
3/64 to 5/64
Thk of Work
1/16 to 3/32
Tube Out Dia
17/32
Head Dia
2-7/32
D4298
Hole Dia
3/4
D2730
Head Dia
7/16
D4410
Tube Ins Dia
29/64
D3916
Special Character
Hole in Head
L Overall
17/64
D4197
L Overall
23/64
L Overall
25/64
Head Thk
1/16
Head Ht
1/16
Hole Dia
5/16
L Overall
11/32
Elect KO Size 1-1/4
Head Dia
1-13/16
Thk of Work
1/64 to 1/16
Thk of Work
1/16 to 3/32
Hole Dia
1-3/4
Thk of Work
1/32 to 1/8
D2666
Head Dia
13/32
D2859
D3561
Hole Dia
1-1/8
Hole Dia
9/32
L Overall
15/64
Head Dia
13/16
Tube Out Dia
17/32
Head Ht
1/16
Head Ht
1/16
Hole Dia
5/8
D4149
Tube Ins Dia
3/8
Thk of Work
1/32 to 1/16
L Overall
9/32
L Overall
21/64
D4212
Hole Dia
1-5/8
D2587
Thk of Work
3/64 to 3/32
Thk of Work
1/8 to 5/32
Head Ht
3/32
Head Dia
13/32
L Overall
13/32
D3558
Head Dia
23/32
D3550
Hole Dia
1/4
Elect KO Size 2
Head Dia
2-11/16
L Overall
23/64
Head Thk
5/64
L Overall
3/8
L Overall
5/16
Hole Dia
9/16
L Overall
9/32
D5590
Special Character
Extruded Head
Thk of Wk
1/32
Head Dia & Ht
13/16
Hole Dia
5/8
L Overall
19/64
D5617
Special Character
Mesh Top
Thk of Wk
.015 to .020
Head Dia & Ht
13/16-3/64
Hole Dia
5/8
L Overall
15/64
D5655
Special Character
Sq/Pointed Prongs
Thk of Wk
0.093 sq
Head Dia & Ht
1-5/64-1/16
Hole Dia
0.92 sq
L Overall
23/64
D5660
Special Character
Rect/Reverse Legs
Thk of Wk
Tubing
Hole Dia
1-5/32-13/32
Head Dia & Ht
1-1/4-1/2 rect
-3/32
L Overall
11/32
25
Terminals, Contacts, Eyelets
and Additional Products for
the Electrical, Appliance and
Electronics Industries
The items displayed on these pages, commonly used by the Electrical, Appliance and Electronics Industries,
are a representative sampling of the items available within each of these product groups.
In addition to these items, we refer you to our Eyelets and Hole Plugs, two product groups also commonly
used by the Electrical, Appliance and Electronics Industries. For Eyelet information please see “An
Introduction to Eyelets” on pages 10-13 and “GS® Eyelets” on pages 14-15. As an additional source of
information regarding the over 3,800 different sizes of Stimpson Eyelets, please request the Stimpson
Eyelet Catalog.
Hole Plug information, descriptions and sizes are available on pages 24-25.
Fuse
Plug
Contacts
D4440
D5672
D5673
Battery
Snaps
D2803
D2297
D3444
Pre-coiled
Eyelets
26
D5456
D5458
D3915
D5667
Fahnestock
Clips
D4429
D4854
D4668
D4664
D4668
Eyelet Terminals
D3594
D5640
D2149
D3754
D5702
D4568
D5574
D5560
D5623
D5489
D2390
Contacts
D2234
D4817
D4907
Co.
Funnel Flange Eyelets
A2059
A3552
A3008
Shoulder
Eyelets
Tapped
Eyelets
D2971
A2755
A2018
A2207
A2056
A2145
A3024
D5096
D5047
D5361
D5379
D3337
D3019
Terminal Washers
D1869
D3025
Inc.
Ferrules
A2352
A3029
A2362
D5052
D3085
D4495
Spade and Ring Terminals
D1296
D4335
D2355
D3252
D1306
27
Ferrules, Shells, Caps and Cups
An Endless Variety...
Best described as drawn metal shells with little or no flange, Ferrules can be made in various configurations; straight or
tapered, with a shoulder, closed end, or with almost any size or shape hole in the bottom. The shape of the bottom can
vary from flat to spherical. This limited selection shows the wide range of styles available.
D5642
D5680
Clamps
& Tips
D5349
D3880
D4391
D4985
An introductory display of some of our most popular Clamps and Tips...
D1087
Corners
D5119
D2140
D128
D225
D2103
D2044
D4026
D3374
D5205
and a selection of our Corners...
D5625
D5624
D4925
D4882
D4885
28
D3918
D5698
D4578
D5611
D4743
D2557
D754
D753
D752
D3625
D2659
D5704
D4959
D4688
D4964
D3920
D5476
D4523
D5644
D5423
D2957
D5094
D2174
D3405
D877
D5592
D4456
D3525
D755
P470
D2741
D5021
P466
P468
D5576
D5651
D5278
D3885
P574
Co.
D5588
P568
D5619
D4396
D2444
Inc.
D5581
D5526
D4132
29
Vents and Washers
D4792
C790
Used in mattresses, rain gear, boots, hats...for air circulation or drainage.
Shown with matching washer, where appropriate.
D53
C658
Washers
Commonly found with our grommets, vents and apparel eyelets, Stimpson
washers also have numerous industrial applications.
CIRCULAR WASHERS
SQUARE/RECTANGULAR WASHERS
OBLONG WASHERS
Hangers and Hooks
D372
D2267
An introductory sampling of these products are displayed for your interest.
D4840
Arrows,
Hands
and
Spinners
30
D2486
D770
D311
D175
D4965
D4259
D122
D112
D708
D5650
C790
D2084
C755
D2260
C754
D1918
C528
D54
C755
D2421
C755
D2263
C754
D3097
C528
D2228
C754
D4395
C83
D3738
C62
#4 Screw
C148
D3787
FLUSH TYPE
#8 Screw
C169
D4019
#10 Screw
C145
D2389
D4590
D4771
D1216
#4 Screw
C336
CUP TYPE
#8 Screw
C198
D4322
HOLLOW COUNTERSUNK
#4 Screw
#8 Screw
#10 Screw
C511
C149
C119
#10 Screw
C199
D1661
A3477
D5573
D5595
D5125
Co.
D5313
D1144
D4060
Inc.
D5311
D5312
31
Co.
Attaching Machines
Inc.
Quality fasteners need to be supported by quality tooling and attaching machines. Whether your requirements are
for a hand operated bench machine, or a fully automatic dual feed grommeting machine, Stimpson makes available to you the finest quality products in the marketplace...insuring that your investment in new tooling or a new
machine will be a wise one.
The following is intended to be a brief introduction of machinery offered by the Stimpson Company, and therefore
not all models or variations are shown.
For more information regarding Stimpson attaching machines and tooling, please ask to speak to one of our
Machinery Customer Service Consultants, who will be happy to assist you. Additional information is also available
on our website at www.stimpson.com.
405 Bench Press
Hand Drive
Model J-239/J-239R
Dual Feed of the Grommet & Washer
Low cost and
versatile, the 405
machine is available
with either a heavy
duty cast iron frame,
or in a lighter version
aluminum frame.
Ideal for setting
Stimpson SelfPiercing Grommets
& Washers.
Used with a wooden
or rawhide mallet,
Stimpson Hand Drive
Tools can be used to
set most sizes of
brass grommets with
either plain, teeth or
spur washers.
Model J-237
Single Feed of the Grommet with
a Washer Shuttle
Models J-239 and J-239R are fully
automatic, dual feed grommeting machines
which will, in a single action, punch out a
hole in your material while simultaneously
setting both the grommet and washer.
They are completely electronic and do not
require pneumatic service.
Model C1
The low cost choice for setting Stimpson
C-E® and Quick Rivets in light to medium riveting applications. Available with
an automatic feed in a foot power
model, or as a hand feed model with
foot, pneumatic or electric power.
32
Model 479
Model 489
Model 479 is a hand feed machine, ideal where
production is limited, available in either foot,
pneumatic or electric power formats. Model
489 eyeleting machine is equipped as an automatic feed in the foot power version and as a
hand feed in pneumatic and electric models.
The Model J-237 is the single feed version
(requires the hand feeding of the washer)
of the Model J-239. In place of an
automatic feed of the washer, the J-237
uses a hand operated shuttle device to
move the washer into place, maintaining
the operator’s hands at a safe distance
from the setting dies.
Note: Safety devices as required are provided with your machine. Safety guards or other operational safety devices provided
should never be removed, disabled or over-ridden during operation since they are designed to reduce the potential of injury to the
operator.
*Photographs may vary from actual machines due to minor design changes.
Model S-90
Model S-96
Model S-83
Model S-92
This pneumatic eyeleting
machine is specifically designed
for inserting small eyelets into
light-duty applications.
Raceways and setting tools are
interchangeable and the machine
is easily converted from one size
eyelet to another in a matter of
minutes.
Provides automatic feeding
and attaching of Stimpson
CE® Rivets in light to
medium applications.
Engineered for versatility,
this pneumatic machine
can be fitted with optional,
interchangeable roadways,
hopper boxes and setting
tools, allowing for use with
the entire line of Stimpson
CE® Rivets.
Designed to use small to mid
size eyelets in most moderate
volume applications, the very
popular Model S-83 is highly
versatile and can be used to
make single or multiple eyelet
settings. Models S-G83 and
S-G2R-83 are used to set
grommet sizes #00 to #2 in
conjunction with a hand fed
washer.
This heavy duty, electrically powered
grommeting machine is designed to
accommodate grommets from size
#00 to #5 inclusive. It is available as
a single or double revolution model.
The single revolution machine can
be used for grommet settings where
materials are pre-punched. The
double action model will cut a hole
on the first revolution and feed and
roll set the grommet on the second.
Model S-98
Model S-83 GW
Model S-92 GW
The Model S-98 is a heavy duty grommeting
machine which will, in a single revolution,
punch out a hole in your material while
simultaneously feeding and setting the
grommet. Using advanced cutting
technology, the S-98 can punch a hole in
even the most challenging of fabrics such
as nylon or kevlar. A material thickness
compensator allows materials with thickness
difference of up to 1/8” to be set without a
setting tool adjustment.
A dual feed, heavy duty grommeting
machine which pierces your material while
it automatically feeds and sets both the
grommet and the washer all with one
tripping of the electric foot switch.
Available for rolled rim grommet sizes
#0 to #4 with matching spur washer, and
plain grommet and matching neck washer,
sizes #00 to #4.
The S-92 GW is a dual feed, heavy duty
grommeting machine. It offers the attractive
advantage of being able to make settings in
heavy duty industrial fabrics by punching out
the hole and then attaching the grommet &
washer in a single cycle. In addition, a
material thickness compensator allows
materials with thickness difference of up to
1/8” to be set without a setting tool adjustment. Available for grommet & washer sizes
#00 to #4 inclusive.
33
Government Contracts
Approved, and in many cases, specified...Stimpson Grommets and Washers,
Eyelets and Snap Fasteners, Clamps and Vents are manufactured in the United
States of America and meet with the latest Military and Commercial Specifications.
Whether your product is a tent,
field pack, duffel bag, parachute...
Stimpson products can help you make your quality
products that much better.
We are proud of the quality of our product and service and
look forward to working together with you..
by providing free samples...
making test settings in your products...
quoting attractive pricing...or just by providing a friendly,
knowledgeable voice on the other end of the phone.
MIL-G-16491
NASM16491
MIL-E-20652
MS 20230
HAT VENT & WASHER
MIL-F-10884
MS 27980/81
MATTRESS VENT
ORD# 8720124
MAIL BAG GROMMET & WASHER
Co.
BOOT VENT & WASHER
Displayed are some of our most requested items.
Stimpson Cage Code #57771
34
ISO 9001 Certified
Inc.
PHONE: (631) 472-2000 • FAX: (631) 472-2425
WEB SITE: www.stimpson.com
E-MAIL: customer_service@stimpson.com
Newest Additions to our Product Guide
Specially Designed Hole Plugs
Newly manufactured to our customer specifications
D5708
D5723
Hole Dia. 1-5/32”
Elect KO Size 1/2”
D5726
D5731
Hole Dia. 1/2”
Hole Dia. 5/8”
D5749
Hole Dia. 9/16”
Hole In Head
.250”
Hole Dia. 1-5/32”
HEAD DIA.
1-5/64”
HEAD HT.
1/16”
HEAD DIA.
1-1/4” sq.
LOA
5/16 ”
HEAD HT.
1/8”
HEAD DIA.
3/4”
LOA
35/64 ”
HEAD HT.
5/32”
HEAD DIA.
5/8” sq.
LOA
11/32”
Model J-596A (Cap & Socket) / J-596B (Stud & Post)
HEAD HT.
5/64”
LOA
3/8”
HEAD DIA.
23/32”
A3822
D5729
OD FLG
LUF
.088” .200” .160”
MT
.015 ”
OD FLG
.089” .180”
Special
Eyelet
MIL F 10884
STYLE 2 / Size 2
MS 27980-27
Flange
Diameter
.560”
Length
Under Flange
.170”
CE® Rivet for
Boot Speed
Laces
D5057 Stud/Eyelet
Combination
MIL F 10884
STYLE 2 / Size 1
MS 27980-26
Flange
Diameter
.560”
LUH
5/16”
Head
Diameter
.562”
Length
Under Flange
.130”
Connector
D5746
C-E 166
SHK DIA HEAD DIA
.157”
.285”
D5740
Post with
Embossed Flange
OD
.360”
.275”
.190”
Special Oval
Grommet
A3821
Tenon Shoulder LOA
OD Length
.383”
The flat design
of both the
Eyelet and
the Washer
make these
parts ideal
for use
with fabric
samples, sample
books and
display racks.
D5755
Screw Stud
Flange
Diameter
.500”
FLG
.902” x .660”
LUF MT
.198” .010 ”
Flange
1.062”
OD
LUF
.300” .255”
MT
.020”
“Swatch Book”
Eyelet and Washer
3/8” Stainless Steel Screw
Length
Under Head
.239”
MT
.010 ”
A3768
FLG
LUF MT
.250” x .187 ” .237” .008”
New Ring Snap Components from Stimpson
D4512 Stud/Eyelet
Combination
LUF
.187”
String Tie
Eyelet
A3838
• Completely Electronic
• Minimal Maintenance
• Simple to Operate
• Quiet Operation
LOA
9/32”
Tongue
Eyelet
Eyelet
Terminal
Fully automatic, dual feed snap fastener machines
(To be used with D4511 Brass Socket, see page 20)
HEAD HT.
1/16”
Overall
Length
.575”
A3717 / C317
Eyelet Dimensions
OD FLG
.132” .788”
ID
.580”
LUF
.127”
Washer Dimensions
OD
.875”
MT
.011 ”
MT
.013 ”
Vent
D5768
OD FLG
.218” .460”
LUF
.165”
MT
.010 ”
35
Co.
Inc.
ISO 9001 Certified
Phone: (631) 472-2000 • Fax: (631) 472-2425
E-mail: customer_service@stimpson.com
Web Site: www.stimpson.com

Stimpson Product Guide - Index Fasteners, Inc.

Transcription

Similar documents

January 16, 2013 Regular Board Meeting Agenda

Honda - Smoky Motion Products