Gas Equipment - Weld

Product Catalogue
2012
Index
Welding Consumables
3-5
Protective Wear
6-8
Gas Equipment
9 - 31
Welding Electrodes
32- 45
Mig & Tig Wires
46 - 48
TBi Torches
49 - 58
Ultra Arc Welding & Plasma Machines
59 - 68
Migatronic Welding Machines
69 - 73
SAF-FRO Welding Machines
74 - 87
Lorch Welding Machines
88 - 89
Shielding Gases Guide
90 - 91
Where to find us
92
2
www.weldcut.co.za
Welding Consumables
General Welding Consumables
WC Part no: 6111051
Testing Chemicals
Non destructive testing for weld
quality

Penetrant - Red (6111041)

Developer - White (6111040)

Cleaner (6111042)
5 Row Mild Steel
WC Part no: 6111093
5 Row Stainless Steel
WC Part no: 6111094
Chipping Hammers
Welding Screen 2 x 3 M
WC Part no: 6111092
WC Part no: 6170045
3
Welding Consumables
General Welding Consumables
Earth Clamps
Earth Clamp 200A
WC Part no: 6111067
Earth Clamp 300A
WC Part no: 6111068
Earth Clamp 600A
WC Part no: 6111069
Electrode Holders
Optimus Type 300A
WC Part no: 6111059
Optimus Type 400A
WC Part no: 6111060
Optimus Type 600A
WC Part no: 6111061
Pferd Abrasives
Comprehensive range
of
Cutting & Grinding
Discs
4
Welding Consumables
Welding Cable & Connectors
16mm
25mm
35mm
50mm
70mm
Welding cable:
200Amp Green
250Amp Blue
300Amp Grey
400Amp Red
500Amp Brown
6111088
6111089
6111090
6111091
6111087
Various sizes trailing cable available.
Machine Panel Sockets:
TEB 10-25 mm
TEB 35-50 mm
TEB 50-70 mm



6160683
6160686
6160820
Cable Sockets (F):




TB
TB
TB
TB
10-25
35-50
50-70
70-95
mm
mm
mm
mm
6160682
6160685
6160688
6160822
Cable Plug (M):




TSB
TSB
TSB
TSB
10-25
35-50
50-70
70-95
mm
mm
mm
mm
6160684
6160687
6160821
6160823
5
Protective Wear
Safety Spectacles
HC 8401
Shaded safety spectacles,
polycarbonate lens and
temple, rubber temple feet.
WC Part number: 617 0088
DD612
Clear wraparound safety
spectacles , polycarbonate
lens and temple.
WC Part number: 617 0085
HC7430
Clear executive safety spectacles, polycarbonate lens and
temple, rubber temple feet.
WC Part number: 617 0080
6
Protective Wear
Protective Gear
Welding Spats, Aprons & Gloves
Chrome Leather Welding Spats
WC Part no: 6110539
Chrome Leather Glove 2” Cuff
WC Part no: 6170049
Chrome Leather Glove 16” Cuff
WC Part no: 6170051
Gauntlet Leather Glove 2” Cuff
WC Part no: 6170058
Gauntlet Leather Glove 16” Cuff
WC Part no: 6170058
V.I.P. Argon TIG Glove 2” Cuff
WC Part no: 6170047
Welders Apron
WC Part no: 6170054
7
Protective Wear
Welding Helmets
Flip Front
Welding Helmets
Part Number: 6170018
Part Number: 6170037
A full range of replacement lenses are available.
8
Harris Compliance Certificates
Encapsulated Seat with Internal Filter
9
Gas Equipment
Single stage regulators
Model 801
Harris
Oxygen
Model 801 D-4-OX 3/8”
Weld-Cut Part no. 6110430
Max Inlet Pressure - 23,000 kPa
Delivery Pressure - 0 - 1,000 kPa
Acetylene:
Model 801 B-1.5-AC 3/8”
Weld-Cut Part no. 6110431
Max Inlet Pressure - 2,500 kPa
Delivery Pressure - 0 - 150 kPa
Model 825
Harris
Oxygen
Model 825 D-1000-OX 3102 3/8”
Weld-Cut Part no. 6110425
Max Inlet Pressure - 23,000 kPa
Delivery Pressure - 0 - 1,000 kPa
Acetylene:
Model 825-1502-AC 3101 3/8”
Weld-Cut Part no. 6110426
Max Inlet Pressure - 2,500 kPa
Delivery Pressure - 0 - 150 kPa
LPG:
Model 825-4-LP 3101 9/16”
Weld-Cut Part no. 6110470
Max Inlet Pressure - 2,500 kPa
10
Gas Equipment
Double stage regulators
Model 896 Regulator
Update on Model 92
Harris
Oxygen
Model 896 D-1000-OX 1547 9/16”
Weld-Cut Part no. 6110428
Max Inlet Pressure - 23,000 kPa
Delivery Pressure - 0 - 1,000 kPa
Acetylene:
Model 896-1502-AC-1546 9/16”
Weld-Cut Part no. 6110429
Max Inlet Pressure - 2,500 kPa
Delivery Pressure - 0 - 150 kPa
Model 899 Regulator
Harris
Oxygen
Model 899 - 10 -OX 1547 9/16”
Weld-Cut Part no. 6110434
(Pre-Set 6110436)
Max Inlet Pressure - 23,000 kPa
Delivery Pressure - 0 - 800 kPa
Acetylene:
Model 899-1.5-AC 1546 9/16”
Weld-Cut Part no. 6110435
(Pre-Set 6110437)
Max Inlet Pressure - 2,500 kPa
Delivery Pressure - 0 - 150 kPa
11
Gas Equipment
Line and Flow Regulators
Pipeline 847-15
Harris
Pipeline Regulator
Model 847-10-Ox 9/16”
Weld-Cut Part no. 6110487
Max Inlet Pressure - 25 Bar
Delivery Pressure 0 - 10 Bar
Model 847-15-Ox 9/16”
Weld-Cut Part no. 6110466
Max Inlet Pressure - 25 Bar
Delivery Pressure 0 - 15 Bar
Available for Argon, CO2 , Nitrogen, etc.
Argon Flow-Regulator
Harris
Argon / Co2
Model 801D-15-F-AR/CD 3/8”
Weld-Cut Part no. 6110432
Max Inlet Pressure - 23,000 kPa
Flow meter - 0 - 15 (L/m)
12
Gas Equipment
Cutting Torch
Technical Data Model 242-NM (GB)
Inlet Size
3/8”
Nozzle Type
ANM / ANME or PNM/PNME (Universal Type)
Weight
1.25 Kg
Weld-Cut Part number
6110400
Cutting capacity 200 mm.
One torch suitable for use with all fuel gases: simply change the tip for
cutting, heating or gouging.
Toughest design-triangular stainless steel tubes, solid forged brass
head.
Fast heating and cutting.
Ease-on cutting oxygen control smoother starts.
Head mixing and equal pressure design for maximum operator safety.
Harris design quality control and reputation makes this the “safest”
long life torch.
13
Gas Equipment
Cutting Torch
Model 62-5F
Technical Data Model 62-5F
Inlet Size
3/8” or 9/16”
Nozzle Type
6290 NFF (Flat Seat)
Weight
1.27 Kg
Weld-Cut Part number
3/8” # 6110402
Weld-Cut Part number
9/16” # 6110411
Low pressure “F” injector torch for maximum performance with
alternative fuels.
Solid forged head resists abuse and distortion.
Triangular tube design is compact and lightweight with exceptional
strength and rigidity.
Brazed connections prevents leaks.
Protected torch union nut protects seats and o-rings from abuse.
Solid-forged lever for exceptional strength.
Ease-on oxygen for smoother start.
14
Gas Equipment
Cutting Torch
Model 28
Technical Data Model 28
Inlet Size
9/16”
Nozzle Type
2890-F / P (Screw Type)
Weight
1.42 Kg
Weld-Cut Part number
6110401
Hand cutting torch for Acetylene and LPG.
Heavy duty cutting applications.
Stainless steel gas tubes.
Tip mixing principle.
15
Gas Equipment
Cutting Torch
Update on Model 28
Also available
Model H 28
Technical Data Model H28
Inlet Size
9/16”
Nozzle Type
2890-F / P (Screw Type)
Weight
1.25 Kg
Weld-Cut Part number
6110403
Hand cutting torch for Acetylene and LPG.
Cutting capacity 350mm.
Toughest design - triangular stainless steel tubes.
Solid forged brass head.
Fast heating and cutting.
Tip mixing principle.
16
Gas Equipment
Cutting Kits
Model 43/49-STD-UP
Technical Data Model 43/49-STD-UP
Inlet Size
9/16”
Nozzle Type
6290 (Flat Seat)
Weld-Cut Part number
6110450
Cuts up to 50mm
Welds up to 9mm
 43-2 handle in forged brass with connection piece in Stainless Steel.
Cutting attachment with triangular S/S tube construction for maximum strength.
 Head mixing for operator safety.
 Flat-seat cutting nozzles for longer life.
 49-3 Cutting attachment.
 Cutting Nozzles - 6290- 2 .
 Welding assemblies: 23-A-90- 3/5/8 .
 Wrench I-62-X , Steel Case.
17
Gas Equipment
Cutting Kits
Model 43/49SUAC
Technical Data Model 43/49-SUAC
Inlet Size
9/16”
Nozzle Type
6290 (Flat Seat)
Weld-Cut Part number
6110451
Cuts up to 150mm
Welds up to 50mm
 43-2 handle in forged brass with connection piece in Stainless Steel.
Cutting attachment with triangular S/S tube construction for maximum strength.
 Head mixing for operator safety.
 Flat-seat cutting nozzles for longer life.
 49-3 Cutting attachment.
 Cutting Nozzles - 6290- 0 / 2/ 4 .
 Welding assemblies: L-43- 3/5/6/9/15 .
 Wrench I-62-X, Twin wheel circle cutting attachment (I-69-6) .
18
Gas Equipment
Cutting Kit Equipment
Handle Model 43-2
WC # 6110419
Cutting Attachment Model 49-3
WC # 6110416
Uses AC Nozzle type 6290
Mixer Model E2-43
WC # 6110440
Welding
23-A-90-0
23-A-90-1
23-A-90-3
23-A-90-5
23-A-90-6
& Brazing Tips Model 23-A-90
WC # 6110443
Weld 0.2 - 0.5
WC # 6110444
Weld 0.5 - 1.0
WC # 6110445
Weld 1.0 - 2.0
WC # 6110447
Weld 2.0 - 4.0
WC # 6110448
Weld 4.0 - 6.0
Circle Cutting Attachment Model R-69-3B
WC # 6110455
Wrench Model I-62-X
WC # 6110438
19
Gas Equipment
Ancillary Equipment
Flexible Hose
Flexible Hose Oxygen 9/16”
Flexible Hose Fuel 9/16”
20
WC # 6110352
WC # 6110352
Cutting Nozzles
Type 6290
21
Cutting Nozzles
Type 6290
22
Cutting Nozzles
Type 8290
23
Cutting Nozzles
Type 8290
24
Cutting Nozzles
Type 2890
25
Gas Equipment
Flashback Arrestors
Model 188 T
Harris
Regulator Mount:
Oxygen
Model 188TR 9/16”
Model 188TRGB 3/8”
Fuel:
Model 188TL 9/16”
Model 188TLGB 3/8”
Part no. 6110408
Part no. 6140183
Part no. 6110409
Part no. 6140184
Model 188-3T Resettable
Harris
Regulator Mount:
Oxygen
Model 188-3-TGBR 3/8” Part no. 6110406
Fuel:
Model 188-3-TGBL 3/8” Part no. 6110407
Model 188 1G
Harris
Torch Mount:
Oxygen
Model 188-1R6 9/16”
Model 188-1GBR8 3/8”
Model 188-1R8 9/16”
Part no. 6140193
Part no. 6110483
Part no. 6110485
Fuel:
Model 188-1L6 9/16”
Part no. 6140194
Model 188-1GBL8 9/16” Part no. 6110482
Model 188-1L8 9/16”
Part no. 6110484
Model 188 GG
Harris
Torch Mount:
Oxygen
Model 188-GGR 9/16” Part no. 6110753
Model 188-GGGBR 3/8” Part no. 6110751
Fuel:
Model 188-GGL 9/16” Part no. 6110752
Model 188-GGGBL 3/8” Part no. 6110750
26
Gas Equipment
Quick Coupling Flashback Arrestors
Model 188QC
Regulator Mount:
Oxygen
Model 188DGNDKR 9/16”
Model 188DGNDKRGB 3/8”
Part no. 6140290
Part no. 6140190
Fuel:
Model 188DGNKL 9/16”
Model 188DGNKLGB 3/8”
Part no. 6140289
Part no. 6140185
Quick Coupling Pin 8mm Hose :
Oxygen
Model CPR 8
Part no. 6140272
Fuel:
Model CPL 8
Part no. 6140271
Model 188QC
Torch Side 8 mm Hose:
Oxygen
Model 188DKSTL8R
Part no. 6140292
Fuel:
Model 188DKSTL8L
Part no. 6140291
Torch Mount Quick Coupling Pin:
27
Oxygen
Model CPR 9/16”
Model CPRGB 3/8”
Part no. 6140299
Part no. 6140175
Fuel:
Model CPL 9/16”
Model CPLGB 3/8”
Part no. 6140298
Part no. 6140172
Gas Equipment
Quick Couplers
Regulator Mount:
Oxygen
Model QACRGB 3/8”
Part no. 6110740
Fuel:
Model QACLGB 3/8”
Part no. 6110741
Quick Coupling Pin 8mm Hose :
Oxygen
Model CPR 8
Part no. 6140272
Fuel:
Model CPL 8
Part no. 6140271
Torch Side 8 mm Hose:
Oxygen
Model QACR8
Part no. 6110742
Fuel:
Model 188DKSTL8L
Part no. 6140291
Torch Mount Quick Coupling Pin:
28
Oxygen
Model CPR 9/16”
Model CPRGB 3/8”
Part no. 6140299
Part no. 6140175
Fuel:
Model CPL 9/16”
Model CPLGB 3/8”
Part no. 6140298
Part no. 6140172
Gas Equipment
LPG Regulator
High Pressure “Red Devil”
WC # 6140147
Triple Flint Lighters
Triple Flint Lighter
Replacement Flints
WC # 6140205
WC # 6140206
LPG Heating Torches
LPG heating torches for the plumbing and
electrical trade. Also suitable for low volume
heating applications.
29
Gas Equipment
Cylinder Trolleys
Single Cylinder Trolley
WC Part no: 6140281
Large Cylinder Trolley
WC Part no: 6140279
Small Cylinder Trolley
Ideal for 10 liter type cylinders
WC Part no: 6140280
30
Gas Equipment
Oxygen and Acetylene Hose
I.D. 8mm
O.D. 16mm
Max. WP 1,500 kPa
Oxygen
Acetylene
6140218
6140217
Tube
SBR Compound
Reinforcement
Multiple fiber braid
Cover
Synthetic rubber, ribbed
Temperature range -25°C + 75°C
Burst Pressure
Working pressure x 4
Meets BS 5120/A Standard
LPG Hose
I.D. 8mm
O.D. 15mm
Max. WP 1,750 kPa
WC Part - 6140216
Tube
Black Rubber
Reinforcement
Textile yarn
Cover
Orange rubber
Temperature range -30°C + 60°C
Meets BS EN559 Standard
Hose Joining Clips
Various Types &
Sizes Hose clamps
31
Welding Electrodes & Wires
Gemini Electrode Range
Unsurpassed quality at market related prices, the Gemini
range of MMA electrodes offers products for welding Mild
Steel (GP, IP, LH), Stainless Steel, Problem Steel, Cast
Iron and Hard Facing applications.
32
33
34
35
36
37
38
39
Ideal for problem
steels
40
41
42
43
44
SAF-FRO Low Hydrogen 7018-1 H4
6160924 SAFER NF 510S 7018-1 Electrodes 3.2mm
6160925 SAFER NF 510S 7018-1 Electrodes 4.0mm
6160926 SAFER NF 510S 7018-1 Electrodes 5.0mm
45
MIG / TIG Wire
MIG Wire
A full range of quality wire is available
Ultra Arc MIG wire.
ER 70S-6 15KG spools available in 0.8 , 0.9 , 1.0 &
1.2mm
Fusto Blu Bulk Packs
ER 70S-6 SG-2 250KG
Available in 1.0 & 1.2 mm
46
Aluminium MIG / TIG Wire
We supply high quality wire from Indalco / Canada.
All popular grades and sizes in stock:
4043
5356
Stainless Steel MIG / TIG Wire
We supply high quality wire from KTM.
All popular grades and sizes in stock:
308LSi
309LSi
310
312
316LSi
430
47
SAF-FRO Sub-Arc Consumables
We have popular grades of Fluxes:

AS 589

AS 450

AS 461
Sub-arc Wire: AS 35 ( EM 12 K)
Flux Cored Wire: Steelcord 19HD (E71 T1—H4)
48
MIG Torches
49
MIG Torches
50
MIG Torches
51
MIG Torches
52
MIG Torches
53
MIG Torches
54
TIG Torches (Air cooled)
55
TIG Torches (Water Cooled)
56
57
TIG Torches
Standard range of ceramic nozzles for all
TIG applications including “gas lens” type.
58
DIY Inverter - MMA
Accessories

Welding cable with electrode holder 1 piece

Earth cable with earth clamp
1 piece
ECONOARC 200






Single phase, portable inverter stick welder, light, air-cooled.
Smooth DC output, built-in hot start function.
Overheating and voltage surge protection.
Suitable for all electrode types.
Includes Electrode holder, cables and earth clamp
Ideal equipment to weld mild steel, mild alloy steel, stainless and cast iron in
DIY job and light industry use
DIY
Light industry
Process

Stick (SMAW)
Technical Data
Model
ECONOARC 200
Input power (V)
220
Rated input current (A)
32.3
Rated input capacity (KVA)
7.1
Rated open circuit voltage (V)
60
Welding current adjustment range (A)
20 –180
Rated output (A)
60% @ 180
Weight (Kg)
10
Electrode diameter (mm)
1.6—5.0
Packing dimensions LxWxH (mm)
460 x 270 x 345
Part Number
6151243
59
DIY Inverter - MMA & TIG
Accessories

Welding cable with electrode holder 1 piece

Earth cable with earth clamp
1 piece
CARiARC –160







Single phase, portable inverter stick welder, light, air-cooled
Smooth DC output, built-in arc force and hot start function
Lift arc TIG function
Overheating and voltage surge protection
Suitable for all electrode types
Includes Electrode holder, cable and earth clamp
Ideal equipment to weld mild steel, mild alloy steel, stainless and cast iron in
DIY job and light industry use
DIY
Light industry
Process

Stick (SMAW)

TIG
Technical Data
Model
CARiARC-160
Input power (V)
220
Rated input current (A)
30
Rated input capacity (KVA)
6.9
Rated open circuit voltage (V)
65
Welding current adjustment range (A)
20 –160
Rated output (A)
25% @ 160
Weight (Kg)
5.3
Electrode diameter (mm)
1.6—5.0
Packing dimensions LxWxH (mm)
600 x 165 x 400
Part Number
6151120
Recommended TIG torch = TBi SR17 - WC # 6160090
(Sold Separately)
60
DIY Inverter - MMA & TIG
HANDY TIG-200SW






Single phase, IGBT DC TIG/Stick welder, light, portable, air-cooled
Smooth DC output, HF arc-piloting, built-in gas pre–flow and gas post–flow,
allow ±20% power supply fluctuation and generator friendly.
Overheating and voltage surge protection
Suitable for all electrode types
Ideal equipment to weld carbon steel, stainless steel and titanium or nickel alloy
steel in DIY and light industry use
Includes TIG Torch, cable and earth clamp
DIY
Light industry
Process

TIG (GTAW)

Stick (SMAW)
Technical Data
Model
HANDY TIG 200SW
Input power (V)
220
Rated input current (A)
35
Rated input capacity (KVA)
8.1
Output open circuit voltage (V)
52
Welding current adjustment range TIG (A)
5-200
Welding current adjustment range STICK (A)
5-180
Rated output (A)
40% @ 200
Weight (Kg)
9.8
Packing dimensions LxWxH (mm)
440 x 245 x 410
Part Number
6151121
61
Inverter - TIG & MMA
Foot Control
Wave 200 AC/DC






IGBT Inverter technology, with safety check and protective function.
Power switch with no fuse circuit breaker, large range of power and voltage.
Excellent weld quality for stainless, titanium, aluminium and copper.
AC / DC pulsed TIG, and DC MMA welding.
Ergonomically design, user friendly controls.
Includes TIG Torch, cable and earth clamp


Optional: Harris argon regulator
: Foot control (P No. 6151258)
Light industry
Heavy industry
Process

HF TIG (GTAW)

HF Pulsed TIG (GTAW-P)

Stick (SMAW)
Technical Data
Model
Wave 200
Input power (V)
220
Rated input current (A)
31
Rated input capacity (KVA)
6.8
Output open circuit voltage (V)
45
AC / DC TIG Output current TIG (A)
10-200
DC MMA Output current STICK (A)
10-130
Rated output (A)
60% @ 200
Weight (Kg)
20
Packing dimensions LxWxH (mm)
570 x 320 x 600
Part Number (Wave 200)
6151257
62
Inverter - TIG & MMA
Foot Control
EconoWave 200 AC/DC








Inverter technology, with safety check and protective function.
Power switch with no fuse circuit breaker, large range of power and voltage.
Excellent weld quality for stainless, titanium, aluminium and copper.
AC / DC pulsed TIG, and DC MMA welding.
Ergonomically design, user friendly controls.
Includes TIG Torch, cable and earth clamp
Light industry
Heavy industry
Optional: Harris argon regulator
Process
: Foot control (P No. 6151258)

HF TIG (GTAW)

HF Pulsed TIG (GTAW-P)

Stick (SMAW)
Technical Data
Model
EconoWave 200
Input power (V)
220
DC , TIG
DC , MMA
AC , TIG
25.5
36.0
23.8
Rated input capacity (KVA)
5.6
8.0
5.0
Output open circuit voltage (V)
65
65
65
10 - 180
10 - 180
10 - 180
60% @ 200
35% @ 200
60% @ 200
Rated input current (A)
Output current (A)
Rated output (A)
Weight (Kg)
25
Packing dimensions LxWxH (mm)
610 x 460 x 420
Part Number (Wave 200)
6151244
63
Inverter - MIG & MMA
Fluxcored Wire 0.9 mm 4.5kg spools
WC Part No. 6111268
Handy MIG 160A





Single phase, IGBT inverter MIG/MAG welder, built-in wire feeder, light, portable, air-cooled.
Smooth DC output, step less current and wire feed control, gas pre-flow and
post-flow settings, undercut, crater-filling.
Excellent for both flux core and solid wire welding.
Thermal overload protection.
Ideal machine to weld mild carbon steel, mild alloy steel, aluminium and
stainless steel in DIY and light industry use.
DIY
Light industry
Process:

MIG/MAG (GMAW)

Flux Cored (FCAW)

CO2

Stick (SMAW)
Technical Data
Model
Handy MIG 160A
Input power (V)
220
Rated input current (A)
21
Rated input capacity (KVA)
4.8
Output open circuit voltage (V)
75
Welding current adjustment range (A)
30– 160
Flux wire diameter (mm)
0.8 - 0.9
MIG wire diameter (mm)
0.6 - 1.0
Rated output (A)
30% @ 160
Weight (Kg)
16.3
Packing dimensions LxWxH (mm)
540 x 550 x 320
Part Number
6151240
Recommended torch = TBi 150 - WC # 6160042 (Sold Separately)
64
Inverter - MIG/MAG
Economig MIG 201





Single phase, IGBT inverter MIG/MAG welder, built-in wire feeder, on wheels, air
-cooled
Smooth DC output, step less current and wire feed control, 2-step & 4-step
function.
Volt and amperage display.
Thermal overload protection.
Ideal equipment to weld mild carbon steel, mild alloy steel, aluminium and
stainless steel in light industry use
Light industry
Process

MIG/MAG (GMAW)

CO2
Technical Data
Model
ECONMIG MIG 201
Input power (V)
220
Rated input current (A)
32.5
Rated input capacity (KVA)
7.2
Output open circuit voltage (V)
42
Welding current adjustment range (A)
50- 200
Wire diameter (mm)
0.8 - 1.0
Rated output (A)
60% @ 200
Weight (Kg)
33,9
Packing dimensions LxWxH (mm)
750 x 350 x 730
Part Number
6151241
Recommended torch = TBi 250 - WC # 6160049 (Sold Separately)
65
Inverter - MIG/MAG
Economig MIG 250





3 phase 380 volt, IGBT inverter MIG/MAG welder, built-in wire feeder, on
wheels, air-cooled
Smooth DC output, step less current and wire feed control, 2-step & 4-step
function.
Volt and amperage display.
Thermal overload protection.
Ideal equipment to weld mild carbon steel, mild alloy steel, aluminium and
stainless steel in light industry use
Light industry
Process

MIG/MAG (GMAW)

CO2
Technical Data
Model
ECONOMIG 250
Input power (V)
380
Rated input current (A)
15
Rated input capacity (KVA)
9.8
Output open circuit voltage (V)
44
Welding current adjustment range (A)
50- 250
Wire diameter (mm)
0.8 - 1.0
Rated output (A)
60% @ 250
Weight (Kg)
39,1
Packing dimensions LxWxH (mm)
830 x 420 x 730
Part Number
6151242
Recommended torch = TBi 250 - WC # 6160049 (Sold Separately)
66
Inverter - Plasma Cutter
EconoCUT 60





Portable inverter plasma cutter.
Air-cooled, Hi frequency.
Gas post-flow adjustment.
Thermal overload protection.
Ideal equipment to cut all kinds of conductive material.

Includes Torch, gas hose with connector, cable and earth clamp
DIY
Light industry
Process:
Air Plasma Arc Cutting
Technical Data
Model
EconoCUT 60
Input power (V)
380
Rated input current (A)
14.5
Rated input capacity (KVA)
10.4
Output open circuit voltage (V)
250
Cutting current adjustment range (A)
20 - 60
Cutting thickness (mm)
8
Rated output (A)
60% @ 60
Weight (Kg)
9
Packing dimensions LxWxH (mm)
460 x 270 x 345
Part Number
615
67
Inverter - Plasma Cutter
INVERCUT 120



3 phase 380 volt, IGBT inverter Plasma cutting, on wheels, air-cooled
Smooth DC output, HF arc piloting, narrow and smooth cutting seam.
Ideal equipment for all conducive metal cutting.

Includes Torch, gas hose with connector, cable and earth clamp
Industrial use
Process:
Air Plasma Arc Cutting
Technical Data
Model
INVERCUT 120
Input power (V)
380
Rated input current (A)
36
Rated input capacity (KVA)
25
Output open circuit voltage (V)
280
Cutting current adjustment range (A)
40– 120
Suggested cutting thickness (mm)
35
Rated output (A)
80% @ 120
Weight (Kg)
80
Packing dimensions LxWxH (mm)
830 x 560 x 670
Part Number
615
68
(42 Max)
MIG/MAG Welding
MIG Machines
Automig 273
Robust, step-regulated MIG/MAG classics for
auto business, trade and industry
Technical Data
Model
Automig 273
Current Range
20—250 A
Voltage Steps
10
Duty Cycle @ 35%
200 A
Open Circuit Voltage
15 – 34 V
Mains Voltage
3 x 230 ^ 400 V
Fuse 230/400V
10 A
Wire diameter
0.6—1.2 mm
Spool Size
5 - 15 Kg
Spot Time, sec.
0.15 - 2.5
Interval Time, sec.
0.15 - 2.5
Burnback, sec.
0.05 - 0.5
Protection Class
IP 21
Standards
EN 60974-1; EN 50199
Dimensions L x W x H (mm)
720 x 380 x 700 mm
Net weight
66 kg
69
MIG/MAG Welding
MIG Machines
MIG 305 C
Automig 231
Robust, step-regulated
MIG/MAG classics for auto
business, trade and industry
Technical Data
Model
Automig 231
Mig 305C
Current Range
20—200 A
40-300 A
Voltage Steps
11
20
Duty Cycle
140 A @ 35%
170 A @ 100%,215 A @ 60%,
285 A @ 35%
Mains Voltage
1 x 230 V
3 x 400 V
Fuse 230/400V
16 A
25/10 A
Wire diameter
0.6—1.2 mm
Spool Size
5 - 15 Kg
Spot Time, sec.
0.15 - 2.5
Interval Time, sec.
0.15 - 2.5
Burnback, sec.
0.05 - 0.5
2 Tack / 4 Tack & Spot timer
Protection Class
IP 21
Standards
EN 60974-1; EN 50199
Dimensions L x W x H (mm)
720 x 380 x 700 mm
960 x 480 x 1260 mm
Net weight
54 kg
121 kg
Weld-Cut #
6150064
6151315
70
MIG/MAG Welding
MIG Machines
The Fully Digital Workhorse
Automig 273i
Technical Data
Model
Automig 273i
Mains Voltage
3 x 400 V
Fuse
10 A
Duty
Duty
Duty
Duty
Cycle
Cycle
Cycle
Cycle
100% @ 40° C
60% @ 40° C
100% @ 20° C
60% @ 20° C
175
195
230
245
A
A
A
A
Current Range
10—270 A
Protection Class
IP 21
Standards
EN 60974-1; EN 50199
Dimensions L x W x H (mm)
720 x 380 x 700 mm
Net weight
66 kg
71
MIG/MAG Welding
MIG Machines
MIG 445xC
Step-regulated MIG/MAG Machines for Industrial
Welding - from Sheet Metal to
Heavy Duty Construction
Technical Data
Model
MIG 445x C
Fuse 230 / 400 V
50 / 20 A
Voltage Steps
24
Duty Cycle @ 100%
Duty Cycle @ 60%
Duty Cycle @ 35%
265 A
315 A
405 A
Current Range
40 - 445 A
Inductance Tappings
2
Efficiency Rate
0.85
Cooling Tank, Litre
3.5
Cooling System Capacity
700 W
Protection Class
IP 21
Standards
IEC 60974-1; - 5; - 10
Dimensions L x W x H (mm)
960 x 480 x 850 mm
Net weight
163 kg
72
MIG/MAG Welding
MIG Machines
MIG 545xS
Step-regulated MIG/MAG Machines for Industrial
Welding - from Sheet Metal to
Heavy Duty Construction
Technical Data
Model
MIG 545x S
Fuse 230 / 400 V
50 / 35 A
Voltage Steps
36
Duty Cycle @ 100%
Duty Cycle @ 60%
Duty Cycle @ 35%
350 A
430 A
505 A
Current Range
40 - 545 A
Inductance Tappings
4
Efficiency Rate
0.89
Cooling Tank, Litre
3.5
Cooling System Capacity
800 W
Protection Class
IP 21
Standards
IEC 60974-1; - 5; - 10
Dimensions L x W x H (mm)
960 x 480 x 1 260 mm
Net weight
220 kg
73
MMA Welding
Buffalo 350i CC/CV





Buffalo reliability and ruggedness that defy and face the most severe conditions.
Gouging and also TIG or MIG welding with additional unit.
Whatever your application is you will find in the BUFFALO range.
Compact design (29 kg) Power pack.
Offers high range power and availability , all types of electrodes up to 6,3mm
diameter (cellulosic up to 4 mm)
Coupling two installations is possible.

Technical Data
Model
Buffalo 350i CC/CV
Power supply (three phase)
400 V ± 56-60 Hz
Primary consumption at I max.
28.5 A
No-load voltage
93 V
Welding current
5—350 A
Protection class
IP 23
Standards
EN 60974-1;-10
Duty cycle
10 min. cycle
(@ 40° C)
Electrode
Diameter
@ 100%
@ 60%
@ 35%
250 A
300 A
350 A
Welding
Gouging
1.6 to 6.3mm
Up to 6.0mm
Dimensions L x W x H (mm)
525 x 300 x 390
Net weight
29 kg
To order






Power Source : W/C #: 6150915
Optional Extras:
Electrode holder, earth clamp, connectors and cables.
Remote control
DV 441i 10 m Wire feeder
T.B.I. Torch
74
MMA Welding
Buffalo 650 DC
Specially designed for welding in the most difficult conditions
5 decisive advantages:

The BUFFALO range offers an exceptional multi-use

They originally have a characteristic’s selector CC or CV—MMA/gouging/TIG and MIG

In MIG mode (CV) BUFFALO DC sets will provide optimum results with the DEVIDARC add-on unit

The power unit is oversized allowing a large reserve of power

Even with long lengths of welding cables BUFFALO DC sets will remain efficient for all applications
Technical Data
650DC
Power supply (three phase)
220-230/380-400/
415-440V 50-60Hz
Primary consumption at I max.
130/73/68 A
No-load voltage
75 V
Welding current
30—630 A
Protection class
IP 23
Standards
EN 60974-1;-10
Duty cycle
10 min. cycle
(@ 40° C)
Electrode
Diameter
@ 100%
@ 60%
@ 35%
Welding
Gouging
370 A
470 A
630 A
1.6 to 6.3mm
Up to 13.0mm
Dimensions L x W x H (mm)
820 x 510 x 570
Net weight
190 kg
To order


BUFFALO 650: W/C Part no: 6150914
Wire Feeder for MIG welding SAF DEVIDARC 615114
75
MIG/MAG Welding
Filcord 171 C
6 decisive advantages:

Specialized in thin sheet

User-friendly front panel

2T and spot modes

European connector

2 rollers plate

6 steps adjustment voltage
Technical Data
Model
FILCORD 171 C
Power supply (three phase)
230 V ± 10% - 50-60 Hz
Primary consumption at I max.
24 A
No-load voltage
18—32 V
Welding current
30-170
Protection class
IP 21
Duty cycle
10 min. cycle
(@ 40° C)
@ 100%
@ 60%
@ 35%
60 A
75 A
140 A (at 18%)
Number of rollers
2
Wire diameter
0.6—1.0mm
Dimensions L x W x H (mm)
440 x 670 x 750 mm
Net weight
38.5 kg
Standards
EN 60974-1;-10
Torch types
TBi
To order

Standard equipment: W/C Part no: 6151150
1 power source with wheels
1 cylinder holder
1 connected primary cable L = 3m long
1 ground cable with clamp
1 equipped gas hose 2m long
1 kit accessories for solid wires 0.6—0.8 mm
76
MIG/MAG Welding
Filcord 253 C
6 decisive advantages:

User-friendly front panel

2T/4T and spot models

4 rollers plate

Inversion of polarity

10 steps adjustment voltage

2 reactance plugs
Technical Data
Model
FILCORD 253 C (Compact)
Power supply (three phase)
230-400V ± 10% - 50Hz
Primary consumption at I max.
27—16 A
No-load voltage
18—40 V
Welding current
35-250 A
Protection class
IP 23
Duty cycle
10 min. cycle
(@ 40° C)
@ 100%
@ 60%
@ 35%
140 A
170 A
250 A (at 30%)
Number of rollers
4
Wire diameter
0.6—1.0mm
Dimensions L x W x H (mm)
500 x 870 x 950
Net weight
80 kg
Standards
EN 60974-1;-10
Torch type
TBi
To order

Standard equipment: W/C Part no: 6150746
1 power source with wheels
1 ergonomic lower cylinder holder
1 upper cylinder support with torch rest
1 connected primary cable L = 3m long
1 ground cable L = 3m with clamp and DINSE connector
1 equipped gas hose 2m long
1 kit accessories for solid wires 0.8—1.0mm
77
MIG/MAG Welding
Filcord 453 S
8 decisive advantages:

Power source with self protected safety switches

Separate wire feeder with digital display

1 kit accessories for solid wires 1.0—1.2mm

User-friendly front panel

2T/4T and spot modes

4 rollers

3 x 7 steps adjustment voltage

3 inductance plugs
Technical Data
Model
FILCORD 453 S
Power supply (three phase)
230-400V ± 10% - 50Hz
Primary consumption at I max.
60—34.5 A
No-load voltage
19—54 V
Welding current
35-450 A
Protection class
IP 23
Duty cycle
10 min. cycle
(@ 40° C)
@ 100%
@ 60%
@ 35%
270 A
345 A
450 A
Number of rollers
4
Wire diameter
0.6—1.2mm
Dimensions L x W x H (mm)
610 x 915 x 1 030 mm
Net weight
135 kg
Standards
EN 60974-1;-10
Torches types
TBi

Standard equipment: W/C Part no: 6150964
1 power source with handle and wheels
1 ergonomic lower cylinder holder
1 upper cylinder support with torch rest
1 connected primary cable L = 3m long
1 ground cable L = 5m with clamp and DINSE connector
1 equipped gas hose 2m long
78
MIG/MAG Welding
Digi@wave 400 W
DIGI@WAVE has been designed for all applications
requiring very high quality welding for all thicknesses
and all materials used in the main industrial sectors.
A wide graphic screen allows the operator to navigate
easily around a menu bar for adjusting the various
parameters of the unit.
User-friendliness and high level performance make
the DIGI@WAVE the ideal partner for your manual,
automatic and robotic welding.
Standard equipment: W/C Part no: 6150964
79
Plasma Cutting
Saxojet
Product Features

Light and portable (12kg)

Input current < 16 A, can be used with a domestic plug

Digital display of parameters, friendly and easy interface

Built-in compressor: just plug in and cut

Delivered ready to use

Cuts without earth clamp up to 2 mm
Technical Data
Model
SAXOJET: Built-in compressor unit
Primary input Single phase
Primary input Max. input
230 V - 50-60 HZ
16 A
Output Cutting current
Output Duty cycle at 40° C
10 - 20 A
20 A at 50° C
Protection index
IP 23
Insulation class
H
Standards
EN 6097-1; EN 6097-7; EN 6097-10
Dimension characteristics
Dimensions
Net weight
435 x 185 x 306 mm
12 kg
To order
Power source
Wear parts for JET CP 0.5
FL electrode
FL 0.65 nozzle
TN skirt for drag cutting
Key wrench
W/C Part no: 6150916
W
W
W
W
000
000
000
000
302
302
302
302
80
575
623
630
578
Plasma Cutting
Prestojet 1
Product features:

Superior quality drag cutting with patented wear parts

High performance , 8 mm genuine cut

Light weight (8 kg)

Great savings due to low current and air consumption.

Reliable and strong: PRESTO “heavy duty” design

Digital display for easy ,precise and repeatable regulation

Microprocessor control technology to improve cutting
quality
Technical Data
Model
PRESTOJET 1
Power supply
230 V 50-60 HZ single-phase
Max input
23 A
Compressed Air
4 bar—100 l/mn
Insulation index
H
Protection Index
IP 23
Dimensions L x W x H (mm)
435 x 185 x 306 mm
Net weight
8kg
Standards
EN 60974-1;-7;-10
To order

Ready to use: W/C Part no: 6150744
81
TIG Welding
Saxotig 160 DC
4 decisive advantages:

HF striking

Simple welding cycle: pre-gas, slope-down and
post-gas adjustable on the front panel,
MMA or TIG DC modes
2T-4T modes


Technical Data
Model
SAXOTIG 160 DC
Power supply three-phase
230 V ±10% - 50-60 HZ single-phase
Primary consumption at I max.
19 A
No-load voltage
82 V
Welding current
5—150 A
Protection class
IP 21C
Duty cycle
10 min. cycle
(@ 40° C)
@ 100%
@ 60%
@ 30%
100 A
120 A
150 A (at 35%)
Electrode diameter
4.0 mm
Dimensions L x W x H (mm)
420 x 175 x 300 mm
Net weight
10 kg
Standards
EN 60974-1;-10
Torch type
RL S family
To order

Standard equipment: W/C Part no: 6150752
1 SAXOTIG 160 DC
1 primary cable L = 3 m with SHOKO plug
1 earth cable L = 3 m with earth clamp and DINSE connector
1 equipped gas hose L = 3 m
Cat. No. W 000 056 001
82
TIG Welding
Saxotig 170 DC
7 decisive advantages:

Pulsed TIG current

Complete welding cycle

Digital display of the parameters

MMA or TIG DC modes

HF-PAC arc striking
2T-4T modes
Choice of two current levels

Technical Data
Model
SAXOTIG 170 DC
Power supply three-phase
230 V ±10% - 50-60 HZ single-phase
Primary consumption at I max.
22 A
No-load voltage
66 V
Welding current
5—160 A
Protection class
IP 23C
Duty cycle
10 min. cycle
(@ 40° C)
@ 100%
@ 60%
@ 30%
110 A
140 A
160 A (at 35%)
Electrode diameter
4.0 mm
Dimensions L x W x H (mm)
430 x 190 x 320 mm
Net weight
10 kg
Standards
EN 60974-1;-10
Torch type
RL S family
To order

Standard equipment: W/C Part no: 6150966
1 SAXOTIG 170 DC
1 primary cable L = 3 m
1 equipped gas hose L = 2 m
Cat. No. W 000 263 655
83
TIG Welding
Prestotig 210 DC
7 decisive advantages:

Complete welding cycle pre/post-gas, up/down slope
current with setting
MMA or TIG DC modes
Pulsed and synergic pulsed TIG current
2T-4T modes and spot mode selection
HF-PAC arc striking
Digital meter
Electric generator compatibility






Technical Data
Model
PRESTOTIG 210 DC
Power supply three-phase
230 V single-phase—50-60 HZ
Primary consumption at I max.
28 A
No-load voltage
80 V
Welding current
5—200 A
Protection class
IP 23C
Duty cycle
10 min. cycle
(@ 40° C)
@ 100%
@ 60%
@ 30%
130 A
150 A
200 A
Electrode diameter
4.0 mm
Dimensions L x W x H (mm)
410 x 180 x 390 mm
Net weight
16.5 kg
Standards
EN 60974-1;-10
Torch type
RL C5B family
To order

Standard equipment: W/C Part no: 6150751
1 PRESTOTIG 210 DC
1 equipped primary cable L = 3 m with plug
1 earth cable L= 3 m with earth clamp and DINSE connector
1 equipped gas hose L = 1,5 m
Cat. No. W 000 262 979
84
TIG Welding
Saxotig 160 AC / DC
Product advantages:

HF arc striking

Pulsed function

Single welding cycle,

TIG DC / AC / MMA modes

2T-4T Spot mode

Pre and post—gas adjustment
Technical Data
Model
Saxotig 160 AC / DC
Power supply three-phase
230 V single-phase—50-60 HZ
No-load voltage
82 V
Welding current
5—150 A
Protection class
IP 23
Duty cycle
10 min. cycle
(@ 40° C)
@ 100%
@ 60%
@ 30%
80 A
100 A
150 A
Dimensions L x W x H (mm)
420 x 230 x 450 mm
Net weight
21 kg
Standards
EN 60974-1;-10
Torch type
RLS family
To order

Standard equipment: W/C Part no: 6150750
1 SAXOTIG 160 AC / DC
1 primary cable L = 3 m with SHOKO plug
1 earth cable L = 3 m with earth clamp and DINSE connector
1 equipped gas hose L = 3 m
Cat. No. W 000 056 001
85
TIG Welding
Prestotig 240 AC / DC
8 decisive advantages:

AC/DC welding currents

Complete welding cycle: pre/post gas—up/down slope cur





rent with setting
MMA or 2T-4T TIG and spot mode selection
Pulsed and synergic pulsed TIG current
HF-PAC arc striking
Digital meter
Memorization of 9 programs
Electric generator compatibility
Technical Data
Model
PRESTOTIG 240 AC/DC
Power supply three-phase
230 V ±15% - 50-60 HZ
Primary consumption at I max.
3.9 kVA
Open circuit voltage
58 V
Welding Range TIG
Welding Range MMA
3—230 A / 19.2 V
10—180 A / 27.2 V
Protection class
IP 23C
Duty cycle
10 min. cycle
(@ 40° C)
@ 40%
@ 60%
@ 30%
230 A
200 A
180 A
Processes TIG
Processes MMA
Additional feature
Programmes
DC - AC - Mix AC/DC - Pulsed
AC - DC- / DC+
Level tack for thin material
Compotig
10
Dimensions L x W x H (mm)
475 x 200 x 405 mm
Net weight
17 kg
Standards
EN 60974-1;-10
Torch type
RL C5B family
86
TIG Welding
Prestotig 250 AC / DC
8 decisive advantages:

AC/DC welding currents

Complete welding cycle: pre/post gas—up/down slope cur





rent with setting
MMA or 2T-4T TIG and spot mode selection
Pulsed and synergic pulsed TIG current
HF-PAC arc striking
Digital meter
Memorization of 9 programs
Electric generator compatibility
Technical Data
Model
PRESTOTIG 250 AC/DC
Power supply three-phase
230 / 400 V ±10% - 50-60 HZ
Absorbed Power @ maximum Intensity
7.5 kVA
No-load Voltage
70 V DC
Adjustment Range
3—250 A (DC) 10 - 250 A (AC)
Protection class
IP 23C
Duty cycle TIG
(@ 40° C)
@ 100%
@ 70%
220 A
250 A
Welding Cycle Functions
Pre and post-gas, arc rise and fading
ramps with settings, memorization of 9
programmes, DC and AC electrode welding (+/- polarity), TIG DC, pulsed TIG
Welding Cycles
2T - 4T - Spot
Dimensions L x W x H (mm)
690 x 260 x 550 mm
Net weight
39 kg
Standards
EN 60974-1;-10
87
MIG Speed Welding
88
MIG Speed Welding
89
Shielding Gases Guide
90
Shielding Gases Guide
91
Head Office
www.weldcut.co.za
3 Vereeniging Road
Alrode, Alberton
Phone:
011 389-7000
Fax:
011 617-7519
E-Mail: gert.vanaswegen@weldcut.co.za
Branches
Johannesburg
344 Commissioner Street
Fairview, Johannesburg
Phone:
011 618-2205
Fax:
011 614-4370
East Rand
Cnr. Yaldwin & Tudor Street
Jet Park
Phone:
011 823-1805
Port Elizabeth
5 Gracey Street
Neave Industrial, Port Elizabeth
Phone:
041 451-4934
Cape Town
22 Second Ave
Montague Gardens, Cape Town
Phone:
92
021 551-4433