MediaStar IR Blaster Module (911-4153)

Transcription

MediaStar IR Blaster Module (911-4153)
MediaStar IR Blaster Module (911-4153)
Key Features
●
●
●
●
IR Blaster fitted with 2.0M cable
3.5mm 4 pole jack plug
Adjustable Infra Red power output
Covers 30, 33, 36, 38, 40, and 56KHz IR
modulation frequencies
The IR Blaster module can be connected to MediaStar
Encoders and LAN-Casters and then attached to colocated IR controlled headend source devices. This
enables IR commands to be passed back to the headend
source device from any display screen equipped with a
MediaStar Media Decoder.
MediaStar Media Decoders can distinguish between their own
infra red commands and those received from third party IR
devices. This enables these IR commands to be passed back
through the IP network to the MediaStar Media Encoders and
LAN-Caster Media Gateways and then on to the source device,
using the IR Blaster Module, for example a satellite receiver or
DVD player.
Alternatively, it can be set in a dynamic mode, where the IR
signals are routed back to the headend device (Encoder or
LAN-Caster) transmitting the channel being viewed at that time.
The exact routing path can be determined in a number of
ways. It can be locked between two specific devices, for
example a single Media Decoder at a screen and a specific
encoder identified by its IP address.
Model options: 911-4153
Head Office
Cabletime LTD, 65 Greenham Road, Newbury, United Kingdom
RG14 7HX
T:+44 1635 35111 E:sales@cabletime.com www.cabletime.com
USA Office
Cabletime USA T:973 770 8070 E:usa@cabletime.com
Asia Office
Cabletime ASIA T:+852 3101 2650 E:asia@cabletime.com
1/1