Alpine has released their new 2010 Catalog

Transcription

Alpine has released their new 2010 Catalog
The 3rd Generation Velocitec Cam has
Dynamic Load Balancing, eliminating
cam lean issues...
Alpine Archery has long been known as an innovator in the
industry. With Innovation comes improvement. For 2010, Alpine
Archery is improving the Velocitec system yet again.
Introducing the Velocitec 3G! Based on the same tried and true
platform of the Velocitec cam, the 3G has features that not only
enhance the performance of the bow, but create the most user
friendly, powerful, and shootable system available in the entire
archery industry.
The Velocitec 3G will soon be hailed as the premier cam with
the full combination of speed, power, smoothness, and overall
shootability. We have added a platform under the module on the
bottom cam to allow the power buss to create a smooth, quiet
transition into the groove to complete the draw cycle.
The use of the dual payout grooves are specific to keeping the
transfer of load balanced and reducing the proverbial “cam lean”…
Alpine has refined this by helically machining the payout grooves
on the 3G Cam. This measure ensures perfect cam balance in both
static and dynamic positions while keeping the balance through
the entire draw cycle and maintains that balance during the shot
sequence. All this provides you with the most accurate cam system
available. And you thought the i-phone was technical!
The 3rd Generation...
The illustration at the right shows the take-up grooves on the
3G Velocitec Cam with the new helical groove on the cam. The
dotted lines represent the path the yoke harness will follow as the
cam is drawn.
The solid lines represent the path the yoke would follow on a cam
without helical milling of the groove.
As the cam is drawn, the force applied to the limbs change
from one side to the other, which normally induces cam lean.
Alpine’s exclusive “Dynamic Load Balancing System” with helical
grooves machined into the new Velocitec 3G Cam System, move
the balance point of the limb laterally in a continuous motion as
the cam is drawn, thereby following the load change and keeping
the cam straight, throughout the entire draw cycle.
Alpine Ball Bearing Technology...
Patent #6,415,780
2
2
Patent # 6,425,780 b1
3
The dotted lines
represent the path
the yoke will follow to
maintain a lateral shift
of about .050 of an inch.
Jim Shockey Signature
Series Yukon...
As rugged as its namesake…...
4
Licensed under
Patent
#6,990,970B-1
By now, most of you have seen or heard that Jim Shockey is bowhunting again. To build a bow for Jim, we at Alpine
knew it had to be rugged, dependable, and full of character. In 2009, we introduced the Yukon as the only bow fit to wear
the Shockey name. We knew this bow must not only meet, but exceed Jim’s expectations. Thus the Jim Shockey Signature
Series Yukon was born. As a mid-year addition to our lineup, it quickly became the most widely sought after bow in our
already impressive 2009 roster.
The Yukon’s riser is coated in an attractive black wrinkle powder coat finish, while the limbs are film dipped in Realtree
Hardwoods HD. The custom string dampener, that employs the Sims decelerator module, compliments the already
impressive noise and vibration control built into the Yukon. This bow is accented by an antiqued medallion and checkered
wood grip sporting Jim’s initials. A set of red and black pre-stretched Stone Mountain “Dakota” Bowstrings and a fiberlok
shelf pad add to the rich character of this bow. Whether you are a hardcore bowhunter or just a big fan of Jim Shockey, you
owe it to yourself to add this bow to your arsenal. NO GUFF truly describes Jim Shockey and the equipment he chooses.
Team Alpine is proud to be part of Team Shockey.
5
Alpine Silverado
Series Ventura...
Alpine Silverado
Match Grade...
Silverado Series Ventura…
Adding to its legacy…
Alpine Silverado…
Withstanding the test of time…
In 2009, the Alpine Ventura quickly made its way to the
front of the class as the most popular bow in the Alpine lineup.
Back by popular demand for 2010, the Ventura has a few more
hunting stories under its belt. Built on a solid one piece riser, the
Ventura was created for those wanting a longer axle to axle bow.
At 36 ½ inches and a very generous 7 3/8 inch brace height, the
Alpine Ventura touts a boastful 324 fps IBO speed rating.
Add the industry leading VX limb pocket design and the
stored kinetic energy in Alpine’s new 3G Velocitec Cam System
and it’s easy to see why the Alpine Ventura is the leader of the
pack.
Remember Grandpa’s old pickup that would start
when none of the others would? Remember that old
hunting dog that always seemed to run the right track?
They were reliable no matter what. Well the Alpine
Silverado is no different. Thanks to the time tested multipart riser, the Silverado has become the most stable and
cost effective bow on the market today. With a complete
vibration dampening package this bow is extremely quiet
as well as an absolute dream to shoot.
The Alpine Silverado is available in a standard
version or with the ever popular Alpine Match Grade
accessory option. The Match Grade option includes an
integrated Montana Black Gold Flashpoint Sight, an Alpine
Whisperflite Fall Away Arrow Rest, and an Alpine MR2
Stabilizer in matching camo. Visit your local Alpine Dealer
today and see for yourself why the Alpine Silverado is the
most reliable, best performing hunting bow on the market
today.
Alpine Ball Bearing Technology...
Patent #6,415,780
Dave Fowler from Lenore, Idaho with a fine caribou he
killed in Alaska this summer. Dave used a Silverado Series
Ventura to get the job done.
Licensed under Patent
#6,990,970B-1
6
6
Dustin Bomley, Alpine Production Manager, with a fine Old Mexico
Whitetail taken with his Silverado Match Grade. Dustin hunted with Jim
Shockey at Bomex Outfitters. Jim also arrowed a fine buck on that trip.
7
The new “LXP Pocket System”...
2010 marks a year that Alpine Archery is doing the same thing that we always
do…
At Alpine Archery, we believe in making products that are functional and at the
same time, different. We do not settle for status quos. Every year we have a new
item, different idea, and create something better. This ideology will not change.
We continue to press forward and think of cool things that work for today’s
technically advanced and average joe bowhunters.
With all of the innovations to date, we are still pressing on to create products
that function to their maximum performance while being trouble free and
affordable. We are forward thinkers, carving out a path in the archery
industry and leaving our mark to never be overlooked. Alpine Archery is
and will continue to bring you products that are ahead of their time.
Alpine is proud to introduce our “LXP” design. The Laterally eXreme
Pocket design is new for 2010 and available on a broad array of bow
models. If your passion is speed, accuracy, stability, or you are
draw length challenged, there is an Alpine Bow that is fitted with
the “LXP” just for you. The new “LXP” design is an extended
pocket system that will produce the speed of an extreme reflex
bow, with the stability of a straight handle design, and some
modest cost savings to you.
Don’t get caught up trying to “Catch up if you can”. Join
the innovative crowd and be a forward thinker! Shoot
an Alpine bow with “LXP” and leave the others in the
dust.
Alpine Assault...
New for 2010, the Alpine Assault carries features like the LXP
Pocket System, a radical reflex riser, and the New 3G Velocitec
Cam! These features culminate to form the most racy looking and
shootable speed bow on the market to date.
The Alpine Assault has a black wrinkle powder coated riser
for many durable hours of shooting and hunting. The sleek riser is
accented by new Skulz camo limbs, and rich Alpine brown anodized
hardware.
Sporting a 3G Velocitec Cam, the Alpine Assault boasts
a moderate brace height and lengthened axle to axle to provide
a powerful yet smooth shooting machine. With features such as
these, the blazing speeds that are associated with reflex style bow
designs are made possible. At Alpine, we believe speed should also
be accurate. With the Assault you get the best of all worlds.
The 3 & 5 arrow Soft Loc Quivers are
available in the Skulz camo this year, to
compliment the Assault.
Assault bow shown in the new Skulz camo.
8
8
9
Alpine Nitrous N20...
Alpine Eclipse G2...
The New 2010 Alpine Nitrous N2O employs a
neutral riser design to provide accurate and forgiving
shooting, shot after shot. The power train of this speedster
is driven by the new 3G Velocitec Cam. Combine the two
and you have the ultimate in agility and horsepower all
packed into one awesome package. This system is then
topped off with the new LXP pocket which assures it will be
touted as the smoothest, most accurate hunting bow in the
Alpine lineup for 2010.
Finished in G1 Vista camo, the stylish lines,
overall look, and astounding shootability of the Alpine
Nitrous N2O will keep you on the range and in the woods
wanting to shoot more than ever before.
Short draw at its best...
The Nitrous N20 will also be available in a custom
full camo version of the new Skulz camo, at a minimal
$25.00 up charge.
Please allow 3 weeks for delivery.
Dusty Powers, with a huge Utah bull elk. Dusty is the son of 6
time world IBO winner, Dave Powers, who also shoots Alpine.
10
10
Based on the success of the Eclipse and Sienna bow models
over the past couple years, Alpine has gone the extra mile to improve
even more on what was already two great shooting machines!
For 2010, we have created several new features on these
two bow models. First, we have updated the Mini Velocitec Cam to
the new 3G technology, then shifted our focus to the limb pockets. We
employed the new LXP Pocket System to dramatically increase the
performance of these already racy little bows. While adding the LXP
system, we also addressed riser designs. By using the neutral riser
and shortening the limbs, we were able to increase the brace height
and still increase speed at the same time. This ultimately created a
bow that generates higher velocities while still providing a smooth and
forgiving shooting experience.
What was already great just got better! The shorter draw,
smaller framed archer can go afield or on the course with more
confidence than ever before!
Eva Shockey is shooting the Silverado Eclipse.
Eva will be seen shooting some critters on Jim
Shockey’s Hunting Adventures this year.
11
Silverado Series Ventura Target...
Sienna G2 Target...
Ventura Target
Unbelievably accurate……..
Never settle for 2nd place...
Somewhere throughout history the archery industry decided a
good target bow had to be over 40 inches long. Well... someone forgot
to tell that to the Ventura Target! With many impressive wins on the IBO
and ASA circuits along with incredible victories in the highly intense
NFAA schedule, 2009 proved to be a great year for Alpine Archery and
the Ventura. With a 36 ½ inch axle to axle bow, shooters from all over
the country proved that this “X” shooting machine could compete side
by side at local and national levels with any other bow model out there.
Back for 2010, the Ventura target is sure to be a common sight along
shooting lines across the country. Shooters sporting the new Blue and
Gold “Team Alpine” colors will be taking advantage of the forgiving 7
3/8 inch brace height and impressive 324 fps IBO speed rating. If you
have not yet tried this thing of beauty, you owe it to yourself to get to
your local dealer and demand to see what the Ventura can do for you.
Available in Candy Apple Red
and Vader Black with silver
anodized hardware.
Based on the success of the Eclipse and Sienna bow
models over the past couple years, Alpine has gone the extra mile
to improve even more on what was already two great shooting
machines!
For 2010, we have created several new features on these
two bow models. First, we have updated the Mini Velocitec Cam to
the new 3G technology, then shifted our focus to the limb pockets.
We employed the new LXP Pocket System to dramatically
increase the performance of these already racy little bows. While
adding the LXP system, we also addressed riser designs. By
using the neutral riser and shortening the limbs, we were able to
increase the brace height and still increase speed at the same
time. This ultimately created a bow that generates higher velocities
while still providing a smooth and forgiving shooting experience.
What was already great just got better! The shorter draw,
smaller framed archer can go afield or on the course with more
confidence than ever before!
Alpine Ball Bearing Technology...
Patent #6,415,780
VX Pocket System…
Proven positive year after year...
Introduced in 2003, the Alpine VX Pocket System has proven to be the most
secure way to hold split limbs to a bow riser. Since the inception of this design, few
have achieved the extreme control that this pocket system displays. By clamping
the pockets together like a vise, the limb is held so tightly that it exhibits no
movement during the draw cycle or shot sequence. This extreme control allows for
outstanding accuracy and noise control that, to date, has yet to be matched by any
other manufacturer.
12
12
Available in Lollipop Pink
and Vader Black with silver
anodized hardware.
Licensed under Patent
#6,990,970B-1
13
Frontier Bow Package...
The best performance for
your dollar...
The Alpine Frontier was first introduced in 2006 and
remains a very popular bow in the Alpine line up. It is known
for its high quality craftsmanship, awesome performance,
and a very affordable price tag. This lightweight and reliable
machined handle bow is fitted with machined aluminum
components. There are no cut rate plastic cams or pockets
to be found on this little performer. The Frontier sports an
Alpine Advantage One Cam that features an adjustable
draw length and is finished in Next G-1 camo with accented
brown anodized hardware.
Micro Elite...
The perfect performance bow for
the ladies and young adults...
The price point, sharp
look, comfortable
feel, and precision
craftsmanship have
made the Alpine Frontier
a desirable hunting partner.
Each Alpine Frontier is set up
at the factory with Alpine’s own
dampening accessories, making
the Alpine Frontier as silent as
a sniper.
The Alpine Micro will not only meet, but will exceed the
expectations of quality and performance that have been mounted on
this gem of a bow. With rich, brown anodized components, a classy riser
design and impeccable film dip finish, the Alpine Micro boasts nothing
less than quality. Compared to the competition, there are no plastic
components found here. Alpine Archery takes no short cuts. Both the
limb pockets and cams are machined from 6061 aluminum. The Micro
features a full 8 inches of draw length adjustment and peak weights
that range from 40 to 50 pounds. Quality and performance on this little
bow are paramount even for the young, at an amazing 280 fps IBO.
Try the Alpine Micro and you will be amazed at the scores that will be
posted and the trophies that will be taken. If your concern is quality and
performance, this little jewel is the perfect fit.
Package items include...
* Match Grade dual ball bearing Fall Away Arrow Rest
* 5 Arrow Soft Loc Quiver
* Pro Flex Stabilizer
* Montana Black Gold Fiber Optic
Sight
* Wood Panel Grip
14
14
The Micro Elite Package Bow comes standard with a value packed
accessory package. This package includes Alpine’s own Fall Away Arrow
Rest, Alpine 3 Arrow Bear Claw Quiver, and a Cobra Fiber Optic Sight.
The Micro is also available in a bow only option without the accessory
package.
Stalker II Cam with 8 inches of
draw adjustment...
Machined 6061 aluminum cams
with 8 inches of rotating draw
adjustment. Just remove a screw
and rotate the draw module to the
desired draw length.
15
Note: Bow overall lengths and axle to axle lengths are approximate due to soft harness systems.
* Alpine Bearing Patent # 6,415,780
Designed and built in America
BOW MODEL
IBO
Rating
Draw
Length
Draw
Weight
Brace
Height
Bow
Overall
Length
Bow
Axle
to
Axle
Bow
Mass
Weight
Color/
Pattern
Cam
Style
Cam
Bearing
Limb Style
& Length
Grip
Material
String
Length
Buss
Length
String
Material
SILVERADO YUKON
324 fps
@ 30”
29-32”
modules
60, 70#
7.375”
41”
36.5”
4.3#
Black &
Camo
Velocitec
Hybrid
* Precision
ball bearing
13 inch
Parallel
Rosewood
1 piece
59”
33.875”
+ yoke
8125
328 fps
@ 30”
27-30”
modules
60, 70#
7.25”
35.75”
31”
4.2#
Mossy Oak
Treestand
Velocitec
Hybrid
* Precision
ball bearing
13 inch
Parallel
Rosewood
1 piece
54.125
28.5”
+ yoke
8125
324 fps
@ 30”
29-32”
modules
60, 70#
7.375”
41”
36.5”
4.3#
Next G-1
Vista
Velocitec
Hybrid
* Precision
ball bearing
13 inch
Parallel
Rosewood
1 piece
59”
33.875”
+ yoke
8125
80%
310 fps
@ 29”
26-29”
modules
60, 70#
7.25”
39.5”
36”
4.3#
Next G-1
Vista
Mini
Velocitec
Hybrid
* Precision
ball bearing
13 inch
Parallel
Rosewood
1 piece
55”
32.875”
+ yoke
8125
75%
298 fps
@ 27”
24-27”
modules
50,60#
7.25”
36.25”
32”
3.9#
Next G-1
Vista
Mini
Velocitec
Hybrid
* Precision
ball bearing
12 inch
Parallel
Rosewood
1 piece
51.375”
29.5”
+ yoke
8125
75%
310 fps
@ 29”
26-29”
modules
60, 70#
7.375”
39.5”
36”
4.3#
Vader Black
/Silver
Candy Apple
Red/Silver
Mini
Velocitec
Hybrid
* Precision
ball bearing
13 inch
Parallel
Rosewood
1 piece
55”
32.875”
+ yoke
8125
75%
324 fps
@ 30”
29-32”
modules
60, 70#
7.375”
41”
36.5”
4.3#
Vader Black
/Silver
Candy Apple
Red/Silver
Velocitec
Hybrid
* Precision
ball bearing
13 inch
Parallel
Rosewood
1 piece
59”
33.875”
+ yoke
8125
80%
298 fps
@ 27”
24-27”
modules
40, 50#
7.25”
36.25”
32”
3.9#
Pink/Silver
Black/Silver
Mini
Velocitec
Hybrid
* Precision
ball bearing
12 inch
Parallel
Rosewood
1 piece
51.375”
29.5”
+ yoke
8125
75%
328 fps
@ 30”
27-30”
modules
60, 70#
6.125”
38.5”
34”
4.2#
Black/
Skulz camo
Velocitec
Hybrid
* Precision
ball earing
13 inch
Parallel
Rosewood
1 piece
57”
31.75”
+ yoke
8125
320 fps
@ 30”
28-31”
modules
60, 70#
7.25”
37.75”
33.25”
4.2#
Next G-1
Vista
Velocitec
Hybrid
* Precision
ballbearing
12 inch
Parallel
Rosewood
1 piece
56.5”
30.875”
+ yoke
8125
FRONTIER BOW
PACKAGE
300 fps
26-30”
rotating
60, 70#
7.25”
39”
35”
3.5#
Next G-1
One
cam
Bronze
bearing
14.5 inch
Power Tuff
wood
2 piece
93”
38.5”
Fast
Flight
MICRO
280 fps
@ 28”
21-28”
rotating
40, 50#
6.00”
35”
32”
3.0#
Next G-1
Stalker
II
Bronze
bearing
13 inch
Power Tuff
ABS
2 piece
50”
33.5”
Fast
Flight
MICRO ELITE PACKAGE
280 fps
@ 28”
21-28”
rotating
40, 50#
6.00”
35”
32”
3.0#
Next G-1
Stalker
II
Bronze
bearing
13 inch
Power Tuff
ABS
2 piece
50”
33.5”
Fast
Flight
shipped with 29”/30” mods
SILVERADO & MATCH
GRADE
shipped with 28”/29” mods
SILVERADO VENTURA
shipped with 29”/30” mods
YUKON & VENTURA
MINI VELOCITEC CAM
shipped with 27”/28” mods
SILVERADO ECLIPSE G2
MINI VELOCITEC CAM
shipped with 25”/26” mods
SILVERADO VENTURA
TARGET
MINI VELOCITEC CAM
shipped with 27”/28” mods
SILVERADO VENTURA
TARGET
shipped with 29”/30” mods
SILVERADO SIENNA G2
MINI VELOCITEC CAM
shipped with 25”/26” mods
SILVERADO ASSAULT
shipped with 28”/29” mods
SILVERADO NITROUS N2O
shipped with 29”/30” mods
16
16
17
Match
Grade
Option
Package
Option
Let-off
80%
•
80%
80%
Full Skulz
camo
80%
•
80%
65%
•
65%
New Skulz camo on the Soft Loc 5 Arrow. Works
great on all black bows. It matches the limbs on
our New Silverado Assault bow.
Soft Loc Quivers
Soft Loc Special Edition Quivers...
Alpine has raised the bar with some new entries into
the Soft Loc line. These Special Edition Quivers feature a
full camo option for a custom, tricked out look on your bow
setup!
We have built these beauties in Lost Camo for the
folks with Mathews bows and in the new Realtree APG
HD for the wide array of bows currently availability in that
pattern. The APG HD is a very universal green camo that
will match many other camo patterns available in today’s
market.
Since the introduction of the Soft Loc Quiver System back in 2001, it has only gained in popularity.
The Soft Loc quickly became known as the quietest, mid-priced quiver available. When mounted on a bow,
this quiver actually reduces felt vibrations, therefore acting as a great and very practical vibration dampener.
The many awards for quality and innovation have posted this system to be quoted as “The best quiver
system on the market”!
The beauty of the “system” is the extreme versatility of the quiver itself due to the unique rubber
mount and dual guide rails. Attach or detach the quiver quickly and quietly. Vertical adjustment, vibration
dampening, hip holsters, and compact mounts are all features that a great quiver must have. All are
present in the Soft Loc family.
If you are looking for a quiver that is unequalled in quality, innovation, dampening, and price, look no further
than Alpine Archery.
New, Soft Loc
Mounting Assembly...
Soft Loc Special Edition
in Realtree APG HD.
Alpine has re-designed the mounting
assembly for the Soft Loc Quivers.
The new mount will hold the quiver
more securely in place and is slightly
longer to help stabilize the mounting
platform.
Soft Loc Special Edition
in Mathews Lost Camo.
Available in 3, 5, and 7
arrow versions...
Soft Loc Quivers are available in
these popular camo patterns..
* Mossy Oak New Break-Up
* Realtree Hardwoods Green HD
* Realtree Hardwoods HD
* Realtree APG HD
* Next G-1
* Mathews Lost Camo
* Advantage Max-4 (3 & 5 arrow only)
* Mossy Oak Treestand (3 & 5 arrow only)
* Skulz Camo (3 & 5 arrow only)
* Next G1 Vista (3 & 5 arrow only)
* Black (5 arrow only)
18
18
Patent #6,672,299
Jay Gregory, host of The WIld Outdoors, with a fine
Wyoming lope. Jay has used our Soft Loc Quivers for years.
19
The Special Edition Soft Loc is only
available in the 5 arrow version.
Soft Loc
Mounting Assembly...
When purchased separately, this
item is very popular for mounting
to a hard bow case, or hard
surface such as an ATV or UTV.
Soft Loc Accessories
Compact Screw-in Quiver Mount...
The Compact Screw-in Quiver Mount was
first introduced a few years back and has quickly
become a must have accessory if you remove
your quiver from your bow while in the treestand.
Secure your Soft Loc Quiver to any tree with a
flip of the wrist and a simple twist. This unique
Quiver Clip is a great way, pioneered by Alpine
Archery, to securely attach your Soft Loc Quiver
to the tree.
The screw-in version of the quiver mount
has a very sharp lag screw that tucks neatly
into the body of the mount for transportation
and storage. This compact feature allows you
to pack the quiver mount in your pocket or any
pouch of your hunting pack without injury or
damage.
Compact Treestand Quiver Mount...
If you prefer to attach your
quiver to your stand, the Compact
Treestand Mount has the same great
receiver as the screw-in version and
can be attached to the side rail of
any treestand with provided zip tie
straps. This too can be carried in a
pocket or pouch easily. Alpine also
has designed this mount so it can be
attached to any hard surface such as
a cargo box on a 4 wheeler or a hard
bow case.
Just zip tie the mount to your stand
and go...
This setup is perfect for all treestands.
20
20
Tension Pin Set...
The Tension Pin Set for the Alpine arrow gripper is the answer for
holding smaller diameter arrows being produced in today’s market. Each pin
is molded in an oval shape and designed to increase arrow tension on the
Alpine Soft Loc and Bear Claw Quivers. Simply slip a pin into the outbound
hole in the lower gripper. Twist slightly, to increase or decrease tension. 7 pins
included.
Vertical Quiver Mounting Bracket...
Used when shooting shorter bows, this bracket will mount your quiver
2.5” higher to avoid having your nocks contact the ground while resting
the bow on the lower cam.
Soft Loc Replacement
Foam...
Always hunt safe! When your foam gets worn
out, it should be replaced. The Soft Loc Replacement
Foam is not your ordinary foam. It is cut from top
quality ethafoam and will hold up much longer than
generic type quiver foam. New foam insures your
broadheads and arrows will be held
safely in place.
Available for 3, 5, and 7
arrow versions.
“Quick Draw” Hip Quiver System,
switch from your bow to your hip in
seconds ...
Alpine’s Quick Draw Hip
Quiver System features a rugged
full grain leather holster with
a rotating mount and a quick
detach rail gripper. This is a very
unique hip quiver designed with
the flexibility to adapt to brushy
or open conditions in seconds.
Simply purchase the Soft Loc of
your choice (3, 5, or 7 arrow) and
mount it to your bow. Then once
you purchase the hip quiver, you
are set and ready to go with a
mount on your bow and on your
hip. This allows you to switch
back and forth from the bow to
your hip in seconds.
21
Bear Claw
Mounting Assembly...
Alpine’s Bear Claw Quiver
When you want the best on a budget...
Cousin to the Soft Loc… The Alpine Bear Claw Quiver is a great, cost effective way to carry your arrows. The
Bear Claw 3 and 5 arrow versions are designed to have more refined features than any other price point quiver
available.
The Bear Claw Quiver is a universal quiver system designed with the treestand hunter in mind. With the Bear
Claw you have a lightweight, inexpensive quiver that easily detaches and will accept any common arrow size. The Bear
Claw has a wide range of vertical adjustment, so you can move the quiver to avoid rest or sight conflicts and keep your
nocks out of the mud. Conventional broadheads are no problem and the convenient pre-cut holes in the quiver foam
allow you to use mechanical broadheads without the extra weight and expense of an additional arrow gripper.
This is a very popular item. It is normally
mounted to hard bow cases and/or on
ATVs for extra storage.
Bear Claw Compact
Screw-in Mount...
The latch makes the
difference...
The latch on the Bear Claw is fast
and easy to use. This positive
locking latch will allow you to
vertically adjust or remove the
quiver to suit your needs. Just
rotate the lever 90 degrees to lock.
Lever is shown in the open position
in the photo above.
Secure your Bear Claw Quiver to any tree with a flip of the wrist and a
simple twist. This Quiver Clip is a unique way, pioneered by Alpine Archery, to
securely attach your Bear Claw Quiver to the tree.
The screw-in version of the quiver mount has a very sharp lag screw that
tucks neatly into the body of the mount for transportation and storage.
Also available in Compact Treestand Mount. This mount attaches with wire
ties for a more permanent mounting solution.
Always hunt safe!
Works great
with mechanical
broadheads!
Bear Claw Quiver, the ideal
treestand quiver, in all of
the hot camo patterns...
* Mossy Oak New Break-Up
* Realtree Hardwoods Green HD
* Realtree Hardwoods HD
* Realtree APG HD
* Next G-1
* Mathews Lost Camo
* Advantage Max-4
* Mossy Oak Treestand
* Skulz Camo
* Next G1 Vista
* Black (5 arrow only)
22
22
When your foam gets worn out, you should replace it. The
Bear Claw Replacement Foam is cut from top quality ethafoam and
will hold your arrows safely until you are ready for that next shot.
Available for 3 and 5 arrow versions.
23
WhisperFlite Rests
This solid model, exploded view shows the bearing
assembly as it fits into the rest body.
Match Grade quality, with instrument grade
ball bearings...
Affordable, innovative, rugged, and easy to set up...
When the engineers at Alpine Archery sit down and brain storm… Look out!!!
Alpine is always trying to design a better way to do things… In 2006, Alpine introduced
the Whisperflite Fall Away Arrow Rests and today the legacy continues to grow. Independent
testing on over 15 different fall away rests awarded Alpine the #1 best pick in the “Best Bang
For The Buck” category in a recent head to head comparison. This innovative rest is a “no
bones about it” product… Alpine has achieved this by taking into account every possible
feature… Built in arrow holder on the launcher, independent windage and vertical adjustment,
universal mounting holes, buss cable or cable slide pull option, sealed ball bearings, brown
anodize, a silver anodized target color, and the list goes on…
When you stop and look at all of the features, this rest is a “must want”… When you
look at the price, the Whisperflite Fall Away Arrow Rest becomes a “must have”!!!!
Alpine’s Match Grade Whisperflite Rest is built using dual ball bearings with one
bearing mounted into each side of the mounting bracket to assure absolute accuracy
shot after shot for years of trouble free shooting.
Windage adjustment is a
snap with the innovative
launcher mounted on a
unique stainless steel, hex
launcher bar. Just loosen the
three socket head screws
and slide to your desired
setting.
Your choice, cable slide or buss pull...
Just thread your rope into different holes in the radial pull lever to
change the direction of pull.
Alpine’s launcher acts as a built in
arrow holder...
The launcher on the
Whisperflite Rest is
designed to cradle
the arrow while in the
lowered position. Two self
adhesive fleece pads are
provided to reduce noise
as you draw and fire the
bow.
Easy vertical adjustment...
Vertical adjustment is independent
from the horizontal adjustment,
making it easier to hold the desired
settings needed. The stop lever
protruding from the bottom of the
radial pull lever rests against a
socket head screw mounted in a slot
for easy adjustment.
24
24
Whisperflite Match Grade
Ball Bearing Fall Away...
Match Grade in
Brown
Match Grade in
Target Silver
25
MR Series Stabilizers, lightweight,
compact, and economical...
Adjustable, “Six Shooter
Weight System” ...
The Alpine Flex Coupler features
licensed Doinker technology. This coupler
is the heart of our unique stabilizer system.
Alpine’s design is sure to make the MR Series
Stabilizers a practical, tactical, “must have” for
every bowhunter.
The Alpine Archery stabilizer line is designed with every feature being a practical standard. The Pro Flex Stabilizer
dissipates more recoil than any other stabilizer in the industry today. The rubber body and ribbing are designed
specifically to tame any of today’s most radical bows.
The MR Series Stabilizer’s function is recoil reduction and counterbalance. The “Six Shooter” head weight is
designed to give you the ability to change the weight up to 2 oz. by adding or subtracting the 158 grain .357 slugs
that are provided with the stabilizer. Using the Flex Coupler (licensed Doinker Technology), the MR stabilizers
reduce recoil and keep vibrations to a minimum. The MR stabilizers are fitted with the Alpine exclusive
Tactical Rubber Bra. This feature works as a dampener as well as protects the stabilizer from making
noise when bumped against a treestand or brush.
If noise and recoil are an issue, Alpine Archery Stabilizers are the answer.
MR2 Stabilizer
• Adjustable “Six Shooter Weight System”
• Mass weight is 7 to 9 oz.
• Length is 5.5 inches
• Colors available:
• Mossy Oak New Break-Up
• Realtree Hardwoods Green HD
• Realtree Hardwoods HD
• Realtree APG HD
• Next G-1
• Mathews Lost Camo
6 inch Pro Flex Stabilizer...
The Pro Flex Stabilizers have been in the Alpine line
for several years now and still continue to gain popularity. They
have proven themselves time and time again to be one of the
most effective stabilizers for reducing recoil and vibrations. The
Pro Flex is an economical stabilizer with a flexible, hollow rubber
body that is very effective. It is available in black with a mass
weight of 7 ounces. If you want an awesome stabilizer that really
works, look no further.
26
26
New,
Alpine Super Duster
Wind Detection System...
Alpine’s new wind tester is designed to eliminate fumbling for, or even loosing your wind tester while stalking game
and checking wind direction. By hooking it to your belt or pack, you always know where it is, plus it allows you to keep hand
movement to a minimum and remain undetected by your quarry. It is assembled using a shock cord to give you additional
reach away from your body to pick up subtle wind movements. Since the bottle hangs with the nozzle in the down position,
your powder is always charged in the tip, and ready for action.
27
Large Bow Case...
Alpine Archery has created this cable slide by combining Teflon and
rubber into a high-tech composite housing, making the Mach 5 the best cable
slide available. Based on technology from the proven Alpine Glide Slide that
was in the line for years, this slide is the ultimate in combining craftsmanship
and function.
The large Alpine Archery soft bow
case is custom built for all Silverado Series
bows with a maximum capacity of 42 inches
overall length. Fitted with straps to securely
attach to your ATV, plus a generous arrow
case pocket and 3 small accessory pockets
for all wrenches, tools, or release aids.
Available in Realtree Max-1.
Small Bow Case...
The small Alpine soft bow case is specifically
designed for the Alpine Micro.
Many companies claim to come up with “SLICK” ideas…
Alpine Archery has taken it literally, brainstormed, and created yet another revolutionary accessory, the Alpine
Mach 5 Cable Slide.
Since the cable slide is a necessary part of your setup, we have taken every feature into account and come up
with the slipperiest, quietest, fastest cable slide available. The Mach 5 Cable Slide features a Teflon slide surface, press
fit into a rubber, vibration dampening sleeve, and capped off with a space age looking slide body that is fitted with a
termination point for a fall away rest pull cord if desired.
Cousin to the ever successful Alpine Glide Slide, this little gem is a sure fit on any bow utilizing a 3/8” diameter
cable guard. It is available in pink, blue, red, brown, or a high definition camouflage film finish. Don’t let your shot of a
lifetime vanish before your eyes because of an inferior, squeaky, or slow cable slide.
First introduced in 2008 to fit all Silverado Series Bows,
this low wrist, rosewood grip has become very popular for
archers who desire the low wrist feel.
Must be purchased separately.
This exploded view drawing shows the Mach 5
components as they are assembled into the slide.
Rope pull hole for fall away rests.
Streamlined composite body.
Rubber dampening sleeve isolates & reduces vibrations.
The Teflon liner and rubber sleeve have a locator hole to
keep them mated and aligned with the alignment post in
the composite body.
28
28
29
Team Alpine Clothing
Alpine Bow Rack...
The Alpine bow rack is custom built from Idaho
red cedar. Deep relief cut with elk and timber
background. Finished with a urethane clearcoat for
a long lasting finish.
Alpine Pro Staff Shooter Shirt...
For the ladies!!! This HOT black
ribbed boyfriend tank is 100%
cotton, has a longer length, and
is form fitting. Comes with Pink &
White Alpine logo on the chest and
“Fear the Force” across the lower
back. Black. Junior Sizes: SM,
MD, LG, XL, XXL. Retail $13.95+
This hooded sweatshirt is an 80/20
cotton/poly blend fleece. Double layer
hood, drawstrings, and kangaroo
pocket. Middle chest Alpine logo &
“Fear the Force” down left sleeve.
Dark Heather Grey. Mens Sizes: SM,
MD, LG, XL, and XXL. Retail $39.95+
Alpine long sleeve tee with front
Alpine logo & “Fear The Force”
down left sleeve. Short sleeve tees
with front Alpine logo.
NEW!! Be a part of Team Alpine!!!
Short sleeve 100% SoftCool moisture wicking fabric.
Blue & Gold. Alpine logo and “Staff Shooter” on left
chest. Fullsize logo on back. Mens Sizes: SM, MD,
LG, XL, XXL, and 3XL. Retail $32.95+
Alpine hats with embroidered
logo. Available in Camo, Black,
Sage, Brown, and Pink Camo.
One size fits all. Retail $7.95+
These short sleeved polos
have the front embroidered
Alpine logo and are stone
washed in Taupe and Coal.
Mens Sizes: SM, MD, LG,
XL, and XXL. Retail $24.95+
These tee shirts are heavyweight
100% cotton.
Long sleeve available in Prairie
Dust. Short sleeve available in
Olive Green and Steel Blue.
Mens Sizes: SM, MD, LG, XL, and
XXL. Retail $9.95+
30
30
31
www.alpinearchery.com
Business hours: Monday through Friday 8 am to 4:30 PM (Pacific Time)
Catalog requests and e-mail address: info@alpinearchery.com
Alpine Archery is licensed under one or more of the following U.S. patents.
#4,241,715 #5,368,006 #5,809,982 #4,748,962 #5,020,507 #6,990,970
Alpine Archery
PO Box 319
3101 North South Highway
Lewiston, ID 83501
208-746-4717
Alpine innovations since 1988...
1988 1st
1989 1st
1990 1st
1990 1st
1991 1st
1991 1st
1992 1st
1994 1st
1995 1st
1995 1st
1997 1st
1997 1st
1997 1st
2000 1st
2001 1st
2001 1st
2001 1st
2001 1st
2003 1st
2005 1st
2007 1st
Slide Lock Overdraw. This was the first adjustable length overdraw, with a movable carriage.
Ultra Overdraw. First overdraw reversible for right and left hand.
Alpine introduces machined riser bows. The Silverado Target Bow began the machined riser revolution. Within the next few years every manufacturer would follow Alpine’s lead.
Machined riser bows with removable limb pockets and shelves.
To integrate an overdraw system into the Silverado machined riser bow.
To build a reflexed machined riser bow.
Alpine introduces the Alpine Colt youth bow. This bow was the first compound bow scaled down to fit a child properly.
To CNC machine limbs for the closest possible dimensional control.
Alpine built the first rotating draw length cam. This cam was used on the Colt youth bow.
Alpine also introduced the Ladies Silverado bow. This little wonder was the first bow built exclusively for women.
Alpine introduced the Inverse Twin Limb Mounting System. This revolutionary system held twin limbs more securely and quietly than any other limb mounting system offered.
The T-2 cam had two different performance profiles, so one could change the feel and performance of the bow.
To bed limbs in silicone to reduce noise and vibration.
Alpine introduced the patented Fast Trac Ball Bearing Cam technology. This innovative system eliminated bearing wear associated with bronze and nylon bearings. Today most manufacturers are following Alpine’s lead. Patent #6,415,780
To introduce wide platform limb technology for more stability and torsion control.
To introduce wide body cam technology with 25% wider grooves to reduce buss and string serving wear.
The Soft Loc Quiver is the first quiver to provide a dual guide rail, friction locking quiver mount with full vertical adjustment, and a quick dismount with no mechanical fasteners or hardware. Patent #6,672,299
Quiver system with interchangeable hoods to adapt to different camo patterns. (Soft Loc Quiver)
To introduce the VX Series Pocket Mounting System. This system clamps the limbs to the riser like a vice. Still the most solid limb mounting system in the industry today.
To build integrated multi part, modular machined risers with the Tundra Series Denali. This innovative concept reduced material waste and cost and assured precise alignment of the upper and lower limbs. Today, several manufacturers continue to follow Alpine’s lead.
To introduce a hybrid cam system featuring dual payout grooves for load balancing. The Velocitec Cam System also combines different string profiles to balance power and speed with a smooth draw cycle.
32