COMMERCIAL INVOICE DETAILS

Transcription

Introduction
V.1
This manual has been prepared to ensure that our vendors comply with the United States
Customs Regulations. By following this manual, Pitney Bowes will be able to import goods into
the US without serious delays due to missing or incorrect information. The enclosed data was
prepared based on the United States Customs Regulations.
There are four sections to this manual. They are:
1) Invoicing Standards for Commercial shipments (page 2), Return shipments (page 5), Test
Shipments (page 8) and Sample shipments (page 11). Each standard consists of three
pages.
a) The first page explains how to prepare the invoice
b) The second page provides an example of the invoice
c) The third page provides an example of a packing list
2) Alphabetized product list which requires that the product net weight be listed on the
commercial invoice or packing slip. If part of the product name that you are shipping shows
up on the list, you MUST indicate the product’s net weight (page 14).
3) Alphabetized product list, which requires additional information to be noted on the
commercial invoice for proper classification to US Customs. You may be requested to
answer the questions on section 4 below. If the product name is on the list, you must
answer all questions by either sending a copy of the questionnaire with the shipment or by
adding the details to the commercial invoice (starts page 15).
4) Product specific technical questions, which must be completed to ensure proper
classification (starts page 18).
Should there be any questions on this manual, call Robert Emma, 203-426-7328, or send
email to robert.emma@pb.com.
COMMERCIAL INVOICE DETAILS
Below you will find a list of items required on the commercial invoice supplied by Pitney Bowes (PB) vendors. If
you should require clarity on any item, please contact Robert Emma, 203-426-7328. (NOTE: One invoice
should be created for every individual shipment, not each purchase order. A shipment is equal to one bill of
lading)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
(*)
Supplier Company Name, Address, Telephone and Fax number
Supplier Invoice Number (same number issued for payment)
Invoice Date
Company Name and Address which the goods were sold to
Company Name and Address where the goods are to be shipped to
Invoicing Terms (INCO TERMS)
Form of Currency which PB is being invoiced
Country of Manufacture (origin)
a. If more than one origin, list the origin next to the product/component number.
Purchase Order Number
a. For multiple purchase orders on one invoice, list the purchase order number prior to the part
numbers shipped against that purchase order.
Product Number / Component Number
a. The Pitney Bowes product or component number must be listed. Not the supplier part number
(*)
Product Description
a. Finished Goods
i. Complete Description of the product – include as much detail as possible
b. Parts
i. Complete Description of the product/item.
ii. Product Content (ie: plastic, Steel, copper)
iii. Describe the function of the part
iv. List the finished goods or machine the part is made for
v. Belts & Bearings require the name of the actual manufacturer and Country where they
were made
Units Shipped
a. List the number of units shipped per part/item number
Price Per Unit
Net Weight Per Unit
Extended Price (Price Per Unit multiplied by the Number of Units Shipped)
Total Invoice Value
Provide any details pertaining to Assists for the product on the invoice
Finished goods where items were supplied or additional payments were made, shall include the details of
the transaction. For Example:
a. “Materials were supplied free of charge by Pitney Bowes, Inc. Under PO _______ and was
valued at $_______ per unit. These goods were shipped _CIF delivered and are not included in
the value set forth above. <OR>
b. Engineering charges of US $ ____ were previously paid by Pitney Bowes Inc. under PO
Nos. __________ and are not included in the value set forth above.
Provide all Trademark Data
Solid Wood Packing Material Statement (SWPM) <or> Certificate
HTS number if known (export only)
Buying Commissions
Selling Commissions
Toxic Substance Control Act Statement
Additional information may be required for certain products. See attachments to find a product/part name that requires additional detail
2
Commercial Invoice Example
ABC Company
Unite 1000 13th Floor
Centre 9 Science Museum Road
Osaka Japan
Tel: 215-09999-9999
Fax: 215-0999-5555
Sold To:
Pitney Bowes Inc.
11 Edmond Road
Newtown, CT 06470
Inco Terms:
EXW Osaka Factory
Date:
MM/DD/YYYY
Invoice #: abc123456789
Ship To:
35 Washington Street
Stamford, CT 06926
PO #:
See Below
Country of
Product ID
Product Name and Description
Origin
PO 4500011111
J999
Japan
Scale (2lb)
123456789
Seal Moistener
PO 45000012111
9JK9
Inserting Machine
987654
Steel Screw M 4x16
PO 5500002211
321654
Motor - 32V - 12W
Currency:
USD
Units
Price Per
Unit
50
$
35.00
$
1,750.00
China
200
$
1.25
$
250.00
China
10
$ 125.00
$
1,250.00
Japan
1000
$
0.10
$
100.00
25
$
7.25
$
181.25
$
3,531.25
Hong Kong
TOTAL
1285
1. Assist Statement if applicable
2. Solid Wood Packing Material Statement (SWPM) <or> Certificate
3
Extended
Price
Commercial Packing List Example
PACKING LIST
ABC Company
Osaka Japan
Tel: 215-09999-9999
Fax: 215-0999-5555
Ship To:
Pitney Bowes Inc.
Stamford, CT 06926
PO #: See Below
Marks and
Numbers
Product ID
Product Name and
Description
Country of
Net Weight
Origin Units
KG
Gross
Weight
KG
PO 4500011111
Carton 1-10
J999
Carton 11-13
123456789
PO 45000012111
Carton 14-18
9JK9
Carton 19
987654
PO 5500002211
Carton 20-22
321654
Scale (2lb)
Japan
50
100
120
Seal Moistener
China
200
45
50
Inserting Machine
China
10
90.71
105
1000
22.68
24.68
25
56.7
62.5
315.09
362.18
Steel Screw M 4x16 Japan
Motor - 32V - 12W Hong Kong
22 Cartons
TOTAL
1285
4
RETURN SHIPMENT INVOICE DETAILS
lading)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
(*)
Invoice Date
Invoicing Terms (INCO Terms)
Purchase Order Number (PO)/Return Authorization Number (RA)/PB Export Number (EN)
a. For multiple purchase orders on one invoice, list the PO/RA/EN number prior to the part numbers
shipped against that purchase order.
(*)
Product Description
a. Finished Goods
b. Parts
i. Complete Description of the product/item.
ii. Product Content (ie: plastic, Steel, copper)
iii. Describe the function of the part
iv. List the finished goods or machine the part is made for
v. Belts & Bearings require the name of the actual manufacturer and Country where they
were made
Units Shipped
a. List the number of units shipped per product/component number
Price Per Unit NOTE: there will be two values listed for each product if the item is a return after repair
a. Price per unit for the value of the machine prior to the repair (original sale value to PB)
b. Cost to repair the unit. This must encompass all costs contributing to repairing the item.
Net Weight Per Unit
Total Invoice Value
Buying Commissions
Selling Commissions
Toxic Substance Control Act Statement –Chemicals Only (inks, dies etc.)
If the repair is FREE OF CHARGE to PB, then the statement “NO CHARGE TO PITNEY BOWES –
REPAIR FREE OF CHARGE” must be noted on the invoice.
If the return is for other reasons than “ after repair”, please state the reason for the return on the invoice.
(ie: incorrect goods shipped, returned from exhibition, defective goods, etc.)
5
Return Shipment Invoice Example
ABC Company
Osaka Japan
Tel: 215-09999-9999
Fax: 215-0999-5555
Sold To:
Pitney Bowes Inc.
11 Edmond Road
Newtown, CT 06470
Inco Terms:
EXW Osaka Factory
Date:
MM/DD/YYYY
Ship To:
Stamford, CT 06926
PO #:
Product ID
J999
Scale (2lb) Returned after Repair (*)
Return ID
333355555
Currency:
USD
Country of
Origin
Units
Price Per
Unit
China
50
Repaired in Japan
Repair Value for Customs Purposes Only (**)
$
35.00
Extended
Price
$
$
1,750.00
148.00
$
1,898.00
NO CHARGE TO PITNEY BOWES - REPAIR FREE OF CHARGE
TOTAL
50
6
Return Shipment Packing List Example
PACKING LIST
ABC Company
Osaka Japan
Tel: 215-09999-9999
Fax: 215-0999-5555
Ship To:
Pitney Bowes Inc.
Stamford, CT 06926
PO #: Return ID 333355555
Marks and
Numbers
Product ID
Product Name and
Description
J999
Scale (2lb)
Carton 1-10
Country of
Net Weight
Origin Units
KG
China
Gross
Weight
KG
50
100
120
50
100
120
10 Cartons
TOTAL
7
TEST EQUIPMENT INVOICE DETAILS
lading)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
(*)
Invoice Date
Purchase Order Number
(*)
Product Description
a. Finished Goods
b. Parts
vi. Complete Description of the product/item.
vii. Product Content (ie: plastic, Steel, copper)
viii. Describe the function of the part
ix. List the finished goods or machine the part is made for
x. Belts & Bearings require the name of the actual manufacturer and Country where they
were made
Units Shipped
a. List the number of units shipped per product/component number
b. Price Per Unit - A price MUST be established for Test items.
Net Weight Per Unit
Total Invoice Value
Buying Commissions
Selling Commissions
Toxic Substance Control Act Statement – Chemicals Only (inks, dies etc.)
If the test item is FREE OF CHARGE to PB, then the statement “Values are for US Customs Purposes
Only. No charge to Importer. Items are for testing purposes only. Not for resale”
If the test equipment is to be returned to the vendor, then the following statement must be noted on the
invoice “Temporary Import-Te Be Returned After Testing”
8
Test Equipment Invoice Example
ABC Company
Osaka Japan
Tel: 215-09999-9999
Fax: 215-0999-5555
Sold To:
Pitney Bowes Inc.
11 Edmond Road
Newtown, CT 06470
Inco Terms:
Date:
MM/DD/YYYY
Ship To:
Stamford, CT 06926
Atten: John Walker
EXW Osaka Factory
450000000009 Currency:
PO #:
Country of
Origin
Units
USD
Price Per
Unit
Extended
Price
Product ID
J999
Scale (2lb)
Japan
50
$
35.00
$
1,750.00
9JK9
Inserting Machine
China
10
$ 125.00
$
1,250.00
$
3,000.00
Values are for US Customs Purposes only. No charge to Importer.
Items are for testing purposes only. Not for resale.
To be returned after testing
TOTAL
60
9
Test Equipment Packing List Example
PACKING LIST
ABC Company
Osaka Japan
Tel: 215-09999-9999
Fax: 215-0999-5555
Ship To:
Pitney Bowes Inc.
Stamford, CT 06926
PO #: 450000000006
Marks and
Numbers
Country of
Net Weight
Origin Units
KG
Gross
Weight
KG
Product ID
Product Name and
Description
Carton 1-10
J999
Scale (2lb)
Japan
50
100
120
Carton 11-15
9JK9
Inserting Machine
China
10
90.71
105
60
190.71
225
15 Cartons
TOTAL
10
SAMPLE SHIPMENT INVOICE DETAILS
lading)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
(*)
Invoice Date
a. Indicate the identification number of the bulk items being shipped (if any)
(*)
Product Description
a. Items
i. Complete Description each item (i.e.: size of envelope/paper)
ii. Product Content (i.e.: wood pulp)
iii. Describe the function of the item
Units Shipped
a. List the number of units shipped for each item
b. Price Per Unit - A price MUST be established for Test items.
Net Weight Per Unit
Total Invoice Value
Buying Commissions
Selling Commissions
Toxic Substance Control Act Statement - Chemicals Only (inks, dies etc.)
If the test item is FREE OF CHARGE to PB, then the statement “Values are for US Customs Purposes
Only. No charge to Importer. Samples for testing purposes only. Not for resale” must be noted on the
invoice.
11
Sample Shipment Invoice Example
ABC Company
29 London Avenue
United Kingdom
Date:
MM/DD/YYYY
Tel: 215-09999-9999
Fax: 215-0999-5555
Sold To:
Pitney Bowes Inc.
11 Edmond Road
Newtown, CT 06470
Inco
Terms:
Ship To:
Stamford, CT 06926
Atten: Joe Foster
EXW UK Factory
PO #:
450000000009
Currency:
USD
Product ID
Country of
Origin
Units
Price Per
Unit
Extended Price
J999
Envelopes - Standard white [net weight 0.2 g]
UK
200
$
0.15
$
30.00
9JK9
Paper - plain 8.5 x 11 inch [net weight
0.3g}
Germany
200
$
0.10
$
20.00
$
50.00
Values are for US Customs Purposes only. No charge to Importer. Not for resale
Samples for testing machines.
TOTAL
400
1. Solid Wood Packing Material Statement (SWPM) <or>
Certificate
12
Sample Shipment Packing List Example
PACKING LIST
ABC Company
29 London Avenue
United Kingdom
Tel: 215-09999-9999
Fax: 215-0999-5555
Ship To:
Pitney Bowes Inc.
Stamford, CT 06926
PO #: 450000000006
Marks and
Numbers
Country of
Total Net
Origin Units Weight KG
Product ID
Product Name and
Description
Carton 1
J999
Paper - plain 8.5 x 11 inch
Carton 1
9JK9
Paper - plain 8.5 x 11 inch Germany
UK
Total
Gross
Weight
KG
200
1.5
1.8
200
2
2.2
400
3.5
4
1 Cartons
TOTAL
13
Alphabetized product list requiring the product net weight .
The following list of items REQUIRES a Net Weight. For each item shipped, you MUST
indicate the item net weight on the packing list/commercial invoice. If only part of the item
name is in the product being shipped, then you MUST indicate the net weight also.
A4 Sheet
Airshaft
Angle Complete
Anti Static Coating
Axel
Bearing
Belt
Belt Pulley
Blade
Bolt
Box
Bracket
Bracket Mounting Pin
Brush
Bushing
Cable Strap
Cap
Cardboard
Castor
C-Clip
Chain
Cover Lock Assy
Cutsheets
Cutter
Damper
Decal
Display Overlay
Dust Ring
Eccentric Pillar
Electrodes
Encoder Mounting Plate
Envelopes
Fiber Optic Support
Flange
Flexible Cable Wires
Forms
Gear
Gearbox
Generator
Glue
Grease
Ground Braid
Ink Cartridge
Inserts
Keyboard Membrane
Knob
Label
Latch
Leaflets
Lens Packers
Letters
Lever
Locking Housing
Moistener
Nut
O ring
Open Ended Ring Spanner
Packing Insert
Paper
Paper Retard
Pin
Piston
Pivot Insert Frame
Plastic Ball
Pulley
Roller
Screw
Seal
Sealer
Shaft
Silicon Oil
Slide Assy
Spindle
Spring
Steel Ball
Stud
Tape Adhesive
Technical Documentation
Torx Head Screw
Valve
Washer
Wetting Cloth
Wheel Pivot
Wick Assy
14
Product List.
DIRECTIONS:
Product
Description
Simply click on the page number and you will be brought to the form.
Information Needed for U.S. Classification
Assignment
Part also known as
Assemblies
Battery
Bearing
Belts
Bolt
What are the components and function of the
assembly? See Multifunctional Assemblies Guide
See 'Battery' guide.
See 'Bearing' guide.
See 'Belt' guide.
See 'Bolt' guide.
Bottle/Containers
What is the composition (plastic, glass, etc) and
volume (550 ml, etc) of the bottle/container?
55
Bracket
Brake
Brush
Bushing
Cable
Capacitor
Cardboard
Castor
Chain
What is the purpose and the composition of the
bracket?
Is the brake electromagnetic or not?
What is the use of the brush and its composition?
Confirm this is not a bearing. If a bearing see guide
See 'Wire and Cable' guide.
See 'Capacitor' guide.
How is the cardboard used and is it corrugated?
What is the diameter of the castor with the tyre?
See 'Chain' guide.
55
55
55
19
54
24
55
55
25
Circuit breaker
Is the circuit breaker in a molded case and what is
the voltage?
55
Circuit, Integrated
See ‘Integrated Circuit” Guide (Revision 1) (2 pages)
32
Clamp
What is the purpose and the composition of the
clamp?
55
Clip
Clutch
What type of clip, ie.circlip? What is the composition
of the clip? What is the clip used for?
Is the clutch electromagnetic or not?
55
55
Collar
Connectors
Contactor
Control panel
What is the composition of the collar and how does
it function?
See 'Plugs, Sockets And Connectors' guide.
See 'Switch' guide. (2 pages)
Does control panel include the keyboard?
55
43
50
55
Cord
C-ring
Documents
E-ring
Fan
Filter
See 'Electric Cable' guide.
See 'Pin' guide.
See “printed Documents With Text” guide
See 'Pin' guide.
See 'Fan' guide.
See 'Filter' guide.
Folder
Fuse
Gasket
Gear
Is this a table top machine or does it stand on the
floor?
See 'Gasket' guide.
See 'Gear Box' guide.
15
fold roller;motor;cup
moistener;docu.hopper
Page #
connector cord;
handset cord
37
18
19
20
23
27
42
45
42
28
29
55
50
30
31
Product
Description
General Goods
Handles & knobs
Harness
Hinge
Holder
Hook
IC
Assignment
Part also known as
See ‘General Goods’ guide
What is the composition (plastic, metal, etc)?
See 'Electric Cable' guide.
wiring harness
What is the composition?
What is the function?
See 'Screw' guide.
See 'Integrated Circuit' guide. (Revision 1) (2 pages)
Indicator Panel
See ‘Indicator Panel’ guide.
56
Ink
See ‘INK’ guide
57
Inserter
Instruction sheet
Inverter
Kits
Is this a table top machine or does it stand on the
floor?
What is the composition and how many pages?
See 'Power Supply' guide.
See 'Kit' guide.
55
55
44
34
Label
Lamp
Latch
LED
Lens
Lever
Magnet
Memory
Mirror
Motor
Nut
O-ring
Paper (blank)
Paper with Text
Pawl
Pin
Plug
Potentiometer
Power supply
What is the composition; dimensions and does it
contain adhesive?
See 'Lamp' guide.
What is the composition and function?
See 'Diodes, Transistors' guide.
Is this optically worked and is it mounted?
What is the composition and use?
Is this made of metal?
See 'Integrated Circuit' guide. (Revision 1) (2 pages) memory cards
Is this optically worked and is it mounted?
See 'Motor' guide.
See 'Nut' guide.
See 'O-ring' guide.
See “Blank Paper’ guide (2 pages)
See “Printed Documents with Text” guide
See 'Pin' guide.
See 'Plugs, Sockets, Connectors' guide.
Is this wire wound or variable; what is the wattage?
55
35
55
26
55
55
55
32
55
36
38
39
21
45
55
42
43
55
44
Printed Circuit
See ‘Printed Circuit’ guide
58
Does it contain relays, circuit breakers, fuses, or
Printed circuit board switches?
Does it contain relays, circuit breakers, fuses, or
Printed wiring board switches?
Printer
See ‘Printer’ guide.
Pulley
Is this a grooved pulley?
Rectifier
Relay
16
Page #
55
55
27
55
55
47
32
PCB;P C Board
55
PWB; P W board
55
59
55
44
50
Product
Description
Resistor
Ring
Assignment
See 'Resistor' guide.
What is the composition?
Scale
Screws
Seal
See ‘Scale’ guide.
See 'Screw' guide.
See 'Seal' guide.
60
47
48
Sensors
Shaft
Is this a photo sensor, optical coupled sensor, safety
light curtain, or a solid-state switch?
See 'Transmission' guide.
55
52
Sheet
Socket
Solenoid
Spacer
Sponge
Spring
Stopper
Stud
Switch
Terminal
Tool
What is the composition; dimensions and does it
contain adhesive?
See 'Plugs, Sockets, Connectors' guide
Is this electromagnetic?
See 'Spring' guide.
What is the composition and is it threaded?
See 'Plugs, Sockets, Connectors' guide.
How is the tool used?
55
43
55
55
55
49
55
55
50
55
55
Transformer
Washer
Is this a liquid transformer? What is the kVA rating?
If less than 1kVA what is the VA rating?
See 'Washer' guide.
55
53
See 'Wire and Cable' guide; See 'Electric Cable'
guide.
54
See ‘General Goods’ guide
55
Wire
ANY PRODUCT
NOT LISTED
17
Part also known as
Page #
46
55
CLASSIFICATION GUIDE FOR BATTERIES
Please answer the following questions regarding BATTERIES (choose 1. Primary OR 2. Electric
storage and then the appropriate details):
Part#_________________________________
1. If PRIMARY Cells or Batteries(Circle a, b, c ,d, e, or ,f, and appropriate details as necessary):
a. Manganese dioxide
b. Mercuric oxide
i. Having an external volume not exceeding 300 cm3
ii. Other
c. Silver oxide
i. Having an external volume not exceeding 300 cm3
ii. Other
d. Lithium
e. Air-zinc
f. Other
2. If ELECTRIC STORAGE BATTERIES (Circle a, b, c, d, or , e , and appropriate details as
necessary):
a. Lead-acid storage batteries, of a kind used for starting piston engines
i. 12V batteries
1. NOT exceeding 6 kg in weight
2. exceeding 6 kg in weight
ii. Other
b. Other lead-acid storage batteries
i. Used as the primary source for electrically powered vehicles
ii. 6 V batteries
iii. 12 V batteries
iv. 36 V batteries
v. Other
c. Nickel-cadmium storage batteries
ii. Sealed
iii. Other
d. Nickel-iron storage batteries
ii. Other
e. Other storage batteries
i. Used as the primary source of electrically powered vehicles
ii. Other
18
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: BEARINGS
I). Please answer the following questions regarding this product line:
1) Is the item a ball bearing, roller bearing or combined ball/roller bearing (circle one)?
2) Who is the actual manufacturer of the item? _________________________________
3) What is the country of manufacture of the item? ______________________________
II). If the bearing is a ball bearing, answer the following:
1) Does the bearing have an integral shaft (yes or no)?
A)If it does have an integral shaft, is the outside diameter more or less (circle one) than 30 mm?
2) If the ball bearing does not have an integral shaft, please indicate the specific type:
a)___ Thrust bearing
b)___ Linear bearing
c)___ Angular contact bearing
d)___ Radial bearing**see 3 & 4 below
e)___ Ball bearing other then above options
3) If the ball bearing is a radial bearing, does it contain single or double (circle one) ball bearings?
4) If the radial ball bearing is a single row bearing,
a) Is it maximum or full capacity type?
b) Please indicate outside diameter ______mm
III). If the bearing is a roller bearing, please indicate the specific type:
a)___ Tapered roller bearing, with cup and cone assemblies entered as a set
b)___ Tapered roller bearing, with cone assemblies entered separately
c)___ Spherical roller bearing , single row
d)___ Spherical roller bearing, double or more rows
e)___ Needle roller bearing , please indicate roller length ______mm & diameter _____mm
f)___ Cylindrical roller bearing
g)___ Roller bearings other than above options
IV). If bearing is a combination ball/roller bearing, please indicate specific type:
a)___ Combined ball and spherical roller bearing
b)___ Combined ball and needle roller bearing
c)___ Combined ball and cylindrical roller bearing
d)___ Combined ball/roller bearing other than above options
V). If the bearing is a plain shaft bearing is it in a housing (yes / no)?
a) If housed, is it a rod end bearing (yes / no)?
b) If not housed, is it spherical (yes / no)?
If other than any of the above please describe, including such items as bushings , bearing housings for ball,
roller or other (please specify), flange, take-up cartridge, & hanger units, or other (please specify) and housed
bearings incorporating ball or roller bearings (please specify or describe below)
______________________________________________________________________________
______________________________________________________________________________
Part or Item numbers this would apply to:
__________________________________________________________________________________________
_____________________________________________________
19
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: BELTS
Please answer the following questions about BELTS:
1) Type of belt: (Choose one)
a. Conveyor
b. V-belt
c. Synchronous
d. Other
2) Material: (Choose one) a)plastic, b)rubber, or c)textile and the appropriate additional information as
applicable)
A)If Plastic:
1) Does the belt contain textile fibers? Please specify textile component that predominates by
weight over any other textile fiber.
2) Other
B) If Vulcanized Rubber: (please provide details for 1,2 &3)
1) Circumference of belt in cm.
2) Width of belt in cm
3) Please specify if the belt is reinforced with any or all of the following components:
a) Metal
b) Plastics
c) Textile materials—please specify the textile component that predominates
weight
by
d) Not reinforced
C) If Textile Material: (choose one)
1) Man-made fibers
2) Other
3) Name of Actual Manufacturer of the belt:
4) Country of Origin of the belt:
Part number:_______________________________________________________________________________
20
PRODUCT GUIDE FOR BLANK PAPER
Please choose the appropriate type of paper and answer the corresponding questions.
What type of paper is this:
A) Newsprint
1) Standard newsprint in rolls or sheets?
2) Other newsprint in rolls or sheets?
B) Is this paper & paperboard of a kind used for Writing, printing, or other graphic
purposes?
1)
2)
3)
4)
Is paper coated or uncoated?_____________
If coated, what is it coated with?_____________
If coated, One or both sides?__________________
Handmade paper & paperboard
5) Paper & paperboard of a kind used as a base for photosensitive,
heat-sensitive or electro sensitive paper or paperboard.
a) Provide dimensions of this type of paper _________cm X ___________cm
b) Basic paper to be sensitized for use in photography
c) What is the % of cotton fiber in this paper?_______%
6) Is this carbonizing base paper?
a) Please provide dimensions
b) What is the weight of this paper __________g/m2?
c) What is the % of cotton fiber in this paper?________%
7) Other paper or paperboard
a) Is the content of fiber obtained by a mechanical or chemi-mechanical
process? ___________
If yes, more than 10% of
weight OR less than 10% of
weight ____________________
b) What is the weight of this paper __________g/m2?
c) Is this writing paper?
d) Is this India & bible paper?
e) Is it strips, rolls, sheets, or other
(please
specify)_______________
f) Is this printed*, embossed, or perforated?
g) Is this drawing paper?
h) Is this hole-punched loose leaf paper?
i) Basic paper to be sensitized for use in photography?
j) What is the cotton fiber content weight of this paper?
k) What are the dimensions of this paper _______cm X _______cm? (IF folded,
measure in unfolded state)
C) Kraft paper & paperboard other than above
a) Is it coated or uncoated?______________
b) Is this Kraftliner, Sack kraft paper or other kraft paper (please
specify)?__________________________-c) Is this unbleached?
d) Is it strips, rolls or sheets (please specify)______________
e) What are the dimensions _________cm x ___________cm.
f) Is it condenser paper?
21
g) Is it wrapping paper?
h) Is it cards or card material, not punched, for punchcard
machines?_________________________
i) What is the weight of this Kraft paper ____________g/m2?
D) Other paper
1) Is this vegetable parchment, greaseproof paper, tracing paper and glassine and other
glazed transparent of translucent paper?
2) Is this paper in rolls or sheets?
E) Is this Composite paper & paperboard
1) Is this paper laminated internally with bitumen, tar or asphalt?
2) Is this straw paper & paperboard?
3) Is this cloth lined or reinforced paper?
4) Is this any other type of composite paper & paperboard?
F) Is this corrugated paper or paperboard; creped, crinkled, embossed or perforated in
rolls or sheets (please specify type)?
G) Is this carbon, self copy, and other copying , or transfer paper (please specify type)?
1) What is the weight of this paper __________g/m2?
2) Are these rolls or sheets?_________________
3) What are the dimensions ____________cm x ____________cm?
* Printed is defined as: colored, marbled, designed or motif print incidental to primary use. Does NOT
include text or printing for primary use of paper.
22
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: BOLTS
Please answer the following questions regarding this product line:
1) Does the bolt have shanks or threads with a diameter of more or less (circle one) than 6 mm?
2) What material is bolt made of (circle one): iron, steel, aluminum, copper, brass,
other_______________(please specify)?
3) What kind of head does the bolt have:
___ round head
___ hexagonal head
___ head other than round or hexagonal
4) Please specify type of bolt this is:
___ track bolt
___ structural bolt
___ bent bolt
___ bolt other than above options
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
23
Product Classification Guide for Capacitors
Please answer the following questions for capacitors: (choose fixed or variable):
1. Fixed Capacitors (circle one letter & its appropriate details)
a) If Designed for use in 50/60Hz circuits & having a reactive power handling capacity of not
less than 0.5 kvar.(power capacitors)
b) If Tantalum (choose one)
1.Metal case
2.Dipped
3.Designed for surface mounting (SMD) by contact
4.other
c) If Aluminum electrolytic
1.Please provide diameter
d) If Ceramic dielectric, single layer OR multi-layer (circle one), AND
choose 1,2, or 3:
1.Chips
2.Axial leads
3 Radial leads
e) If Dielectric of paper or plastics (choose one)
1.Alternating current-please specify voltage
2. Other—Please circle type of leads: Leadless, Axial , Radial, or Other
f) If Other (choose one)
1.Mica dielectric
2. Other
2. Variable or adjustable (pre-set) capacitors (choose one)
a) Mica, ceramic or glass dielectric
b) Other
Part#__________________________________________________
24
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: CHAIN
1) Is the chain made of iron, steel or copper (circle one)?
If chain is made of copper, stop! If chain is made of iron or steel, proceed.
2) What is the diameter of the chain – less than 8 mm, 8-10 mm, over 10 mm (circle one)?
3) Please specify the type of chain:
___ articulated link roller chain
___ articulated link welded steel chain
___ articulated link cast and combination chain
___ other type of articulated link chain
___ skid chain
___ stud chain
___ welded link, other than articulated or skid, of alloy steel
___ welded link, other than articulated or skid, of iron or non alloy steel
___ chain, other than all above options, with essentially round cross sections
___ chain, other than all above options
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
25
PRODUCT FAMILY GUIDE SHEET FOR:
A. DIODES
B. TRANSISTORS
C. THYRISTORS
d. PHOTOSENSITIVE SEMICONDUCTORS, ETC…
Please choose the correct heading and applicable details that follow
1) Diodes:
i) Light Emitting Diodes
ii) Photosensitive Diodes
(a) Unmounted chips, dice and wafers
(b) Solar cells
1. Assembled into modules or made up into panels
2. Other
(c) Other photosensitive diodes
iii) Other diodes (NOT photosensitive or light emitting)
(a) Unmounted chips , dice, and wafers
(b) Zener
(c) Microwave
(d) Other with a maximum current of 0.5 A or LESS
2) Transistors:
i) Photosensitive transistors
(a) Unmounted chips, dice and wafers
(b) Other photosensitive transistors
ii) Transistors , OTHER than photosensitive
(a) With a dissipation rate of less than 1 W
1. Unmounted chips, dice and wafers
2. With an operating frequency not less than 100 MHz
3. With an operating frequency not less than 30 MHz
3) Thyristers, diacs, and triacs NOT photosensitive:
i) Unmounted chips, dice, and wafers
ii) Other
4) Other semiconducter devices not included above:
i) Unmounted dice , chips and wafers
5) Mounted Piezoelectric crystals
i) Quartz designed for operating frequencies of:
(a) 32.768 kHz
(b) NOT exceeding 1 MHz , except 32.768kHz
(c) Exceeding 1 MHz but not exceeding 5 MHz
(d) Exceeding 5 MHz but not exceeding 20MHz
(e) Exceeding 20 MHz
ii) Piezoelectric crystals OTHER than quartz
Part#_________________________________________
26
Product classification guide for:
* Insulated wire, cable & other electrical conductors:
1. Is the cable coaxial?
2. Is it fitted with connectors?
3. Is it made of copper?
4. Is it Optical fiber cable?
If Optical Fiber, please provide length in meters.
5. Please specify voltage.
6. Is the cable of a kind used for telecommunications?
7. What is the Net weight?
Part#___________________________________________
27
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: FANS
1) Is the fan suitable for use with motor vehicles (yes or no)?
2) Please specify type of fan:
___ Centrifugal fan
___ Axial fan
___ Fan, other than centrifugal or axial
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
28
PRODUCT FAMILY CLASSIFICATION GUIDE FOR:
FILTERS
1) If this filter used for liquids or gases? (Circle one)
If for liquids, what type of liquid does it filter (check one)
___ Water
___ Beverages other than water
___ Oil or fuel, used in internal combustion engines
___ Filter other than above options
If for gases, what type of application would apply (check one)
___ Intake air filters for internal combustion engines
___ Catalytic converters
___ Dust collection and air purification for machine tools
___ Dust collection and air purification for other than machine tools
___ Gas separation equipment
___ Pneumatic fluid power filters, rated at 550 kPa or greater
___ Filter other than all above options
2) Is this item a complete filter or a part of one of the above (please specify) type of filters?
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
29
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: GASKETS
1) Please specify what the gasket is made of:
___ metal sheeting, with two or more layers of metal
___ metal sheeting, combined with other materials (i.e. paper, rubber, textile)
___ textile material
___ paper or paperboard
___ vulcanized rubber
___ hard rubber
___ plastic (any kind of plastic)
**note: if the gasket is made of more than one material, specify the predominate
material above.
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
30
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: GEAR BOXES
1) Is the product gears and gearing, or a complete gear box (circle one)?
2) If gears & gearing, is the product a toothed wheel only?
3) If the item is a gear box, specify type:
___ fixed ratio speed changer
___ multiple and variable speed changer, each ratio of which is selected by manual
manipulation
___ speed changer, other than above two options
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
31
INTEGRATED CIRCUITS
Revised 2/21/03
***The questions below must be answered for ALL integrated circuits and micro assemblies:
Please see further definition at bottom
A) Country of Origin ______________
B )If IC is an SRAM, please provide the name of the DESIGN HOUSE (not the foundry).
C) Are the integrated circuits made exclusively with passive elements? Yes or no
D) Are the integrated circuits mounted onto a circuit board? Yes or no
E) Does the assembly consist of a number of electronic microcircuits mounted on an appropriate shaped
carrier and designed as a part of digital data processing machine storage? Yes or no
F) Part# _______________________________________________________
G)Model#_____________________________________________________
TYPE OF IC:
1) Cards incorporating electronic integrated circuits (smart cards)
2) Monolithic digital integrated circuits (Digital)
i) Unmounted chips, dice and wafers:
(a) Silicon
(b) Other
ii) Other, Silicon
(a) Dynamic read write random access (DRAM)
1. Need to know the number of mega bits _____
(b) Static read write random access (SRAM)
1. Need to know the number of kilo bits _____
(c) Electrically erasable programmable read only memory (EEPROM)
1. Need to know the number of kilo bits _____
(d) Erasable (except electrically) programmable read only memory (EPROM)
1. Need to know the number of kilo bits ____
(e) Other memory
iii) Other, Silicon including microprocessors, controllers, application specific integrated(ASIC)
and programmable logic arrays (PLA):
(a) Microprocessors having an internal data bus of:
(i) Need to know the number of bits _____
(b) Other, Transistor-transistor logic(TTL)____________
(c) Other, Emitter-coupled logic(ECL)_______________
(d) Other Logic__________________________________
iv) Monolithic Integrated Circuit, Digital, Other than Silicon
(a) Memory, _________________
(b) Other, including logic
32
3) Other monolithic integrated circuits, Not Digital
i) Unmounted chips, dice and wafers
ii) Other:
(a) With an operating frequency not less than 100 MHZ
(b) Other:
1. Other, including mixed signal (analog/digital):
i. Logic
ii. Other
2. Other___________
4) Hybrid integrated circuits:
i) With an operating frequency not less than 30 MHZ
ii) Other
5) Electronic microassemblies
6) Parts
ELECTRONIC INTEGRATED CIRCUITS AND MICROASSEMBLIES ARE:
1) Monolithic integrated circuits in which the circuit elements (diodes, transistors, resistors,
capacitors, interconnections, etc.) are created in the mass (essentially) and on the surface of a
semiconductor material (doped silicon, for example) and are inseparably associated.
2) Hybrid integrated circuits in which passive elements (resistors, capacitors, interconnections, etc.)
obtained by thin- or thick-film technology and active elements (diodes, transistors, monolithlic
integrated circuits, etc.) obtained by semiconductor technology, are combined to all intents and
purposes indivisibly, on a single insulating substrate (glass, ceramic, etc.). These circuits may
also include discrete components.
3) Microassemblies of the molded module, micromodule or similar types, consisting of discrete,
active or both active and passive, components which are combined and interconnected.
33
Product Guide for Kits
Please answer the following questions for Kits:
Part#_________________________
What is the purpose of this kit?
Please list the components & the value of each component in this kit:
34
Product Guide for Lamps
Please choose the appropriate type of lamp, and answer the question accordingly:
A) Sealed beam lamp units
1) Is the sealed beam lamp unit under 15.24cm?
2) Is the sealed beam lamp unit for a vehicle?
a) If so, what type of vehicle?
B) Ultraviolet or Infrared lamps & arc lamps:
1) Is this an Ultraviolet lamp?
2) Is this an Infrared lamp?
3) Is this an arc lamp?
C) Other filament lamps (EXCLUDING ultraviolet or infrared)
1) If Tungsten Halogen:
a) What is the voltage?
b) Is it designed for a vehicle?
1) If so, what type of vehicle?
2) Other filament lamps:
a) What is the Voltage?
b) What is the Wattage?
c) Is it a Christmas tree lamp?
d) Is it a 3-way lamp?
e) Is it a decorative lamp?
f) Is it used in cystoscopes or other surgical instruments?
g) Is it a Flashlight lamp?
D) Dishcarge lamps, (OTHER THAN ultraviolet)
Answer for ALL discharge lamps:
What is the Wattage?
What is the Voltage?
1) Flourescent, hot cathode?
a) Is the straight tube over 1.2 m?
b) What type of base does lamp have:(choose one)
1) Plug-in
2) Screw-in
3) Other
2) Mercury vapor lamp?
3) Sodium vapor lamp?
4) Metal halide lamp?
35
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: MOTORS
1) What is the output wattage?
2) Please specify if the motor is:
___ Universal AC/DC motor
___ DC motor
___ AC motor, single-phase
___ AC motor, single-phase, gear motor
___ AC motor, multi-phase
___ AC motor, multi-phase, gear motor
3) If the motor is under 18.65 watts, is the motor synchronous?
4) If a DC motor not exceeding 37.50 watts, is it a brushless motor?
5) What is the Country of Origin of the motor?
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
36
Product Guide for Multifunctional Assemblies
(Addl.U.S.note 2, HTS)
Please note: to be considered here, a unit must contain at least 2 of the items listed in
the applicable assembly.
a) Control or command assemblies, incorporating MORE than one of the following: printed
circuit assembly, hard or flexible(floppy) disk drive, keyboard, user interface;
b) Light source assemblies, incorporating MORE than one of the following: light emitting
diode assembly, gas laser, mirror polygon assembly, base casting;
c) Laser imaging assemblies, incorporating MORE than one of the following: photoreceptor
belt or cylinder, toner receptacle unit, toner developing unit, charge/discharge units, cleaning
unit;
d) Image fixing assemblies, incorporating MORE than one of the following: fuser, pressure
roller, heating element, release oil dispenser, cleaning unit, electrical control;
e) Ink jet marking assemblies, incoporating MORE than one of the following: thermal print
head, ink dispensing unit, nozzle and reservoir unit, ink heater;
f) Maintenance/sealing assemblies, incorporating MORE than one of the following: vacuum
unit, ink jet covering unit, sealing unit, purging unit;
g) Paper handling assemblies, incorporating MORE than one of the following: paper
transport belt, roller, print bar, carriage, gripper roller, paper storage unit, exit tray;
h) Thermal transfer imaging assemblies, incorporating MORE than one of the following:
thermal print head, cleaning unit, supply or take-up roller;
i)
Ionographic imaging assemblies, incorporating MORE than one of the following: ion
generation and emitting unit, air assist unit, printed circuit assembly, charge receptor belt or
cylinder, toner receptacle unit, toner distribution unit, developer receptacle and distribution
unit, developing unit, charge/discharge unit, cleaning unit;
j)
Combinations of the above specified assemblies.
Part#____________________________
Model#__________________________
37
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: NUTS
1) Please specify what material nut is made of (ie.steel, stainless steel, iron, aluminum, etc.)?
2) Are these lugnuts (yes or no)?
3) If the nut is a lugnut, please specify type:
___ non-locking chrome-plated nut
___ locking nut
___ nut other than above options
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
38
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: O-RINGS
1) Please specify what the gasket is made of:
___ metal sheeting, with two or more layers of metal
___ metal sheeting, combined with other materials (i.e. paper, rubber, textile)
___ hard rubber
**note: if the o-ring is made of more than one material, specify the predominate
material above.
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
39
DELETED
40
DELETED
41
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: PINS
1) Is the pin considered a cotter or cotter pin (circle one)?
2) If not a cotter pin, would it be considered another type of non-threaded fastener (yes or no)?
3) Please specify what the pin is made of:
___ iron or steel
___ aluminum
___ copper (brass)
___ plastic
___ material other than above options
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
42
Product Family Classification Guide for : Plugs, Sockets, Terminals, Connectors, etc.
Choose proper voltage: (1 or 2)
1. For a voltage exceeding 1000 V: (choose one)
a. Terminals, electrical splices & electrical couplings
b. Other connectors
c. Other
2. For a voltage under 1000 V: (choose one)
a. Coaxial connectors
b. Cylindrical multicontact connectors
c. Rack & panel connectors
d. Printed circuit connectors
e. Ribbon or flat cable connectors
f. Other connectors
Part#________________________________
43
Product Guide for Power Supplies
Please answer the following questions on Static Converters:
Part#______________________________
What is the wattage of this part?_________________
Please choose the appropriate letter & its corresponding questions:
A) Is this a speed drive controller for an electric motor?
B) Is this power supply for a dataprocessing machine?
If so, is it suitable for physical incorporation into an automatic data processing
machine?
C) Is this a static converter for telecommunication apparatus?
D) Is this a rectifier or rectifying apparatus?
1) If so, is it a power supply?
E) Is this an inverter?
F) Is it another type of Inductor?
1) What type of machine is this inductor for?
44
PRINTED DOCUMENTS w/Text
Include net kg per unit of measure
Printed Books/Brochures/Leaflets
Single Sheet whether or not Folded___________________
Provide Net Kg_____________________________
Other
Technical/Professional book___________________
Other - # of pages(excluding cover)______________
Other Printed Matter
Trade Advertising Material, Commercial catalog and the like
Printed catalogs of items for sale in US____________
Printed catalogs of items for sale in Foreign country________
Other__________________, Net Weight in Kg__________________
Other___________________________________________
45
Product Guide for Resistor’s
Is the resistor fixed or variable (circle one)?
Part Number:__________________________________________
Description: __________________________________________________________
IF FIXED….
• Can the resistor be described as a fixed carbon resistor, a composition resistor or film
type resistor (circle one)? __ Yes __ No
If YES, complete the following…
Is the resistor designed for surface mounting (SMD) by contact? __ Yes __ No
If YES, does the resistor have more than two terminals? __ Yes __ No
If NOT designed for surface mounting does the resistor have more than two leads? _ Yes __
No
Is the carbon, composition or film type resistor other than described above? __ Yes __ No
•
Is the resistor a fixed resistor other than a carbon, composition or film type?
__ Yes __ No
If YES, complete the following…
Is the resistor for a power handling capacity NOT exceeding 20 W? __ Yes __ No
Is the resistor for a power handling capacity exceeding 20 W? __ Yes __ No
Is the resistor designed for surface mounting (SMD) by contact? __ Yes __ No
Does the resistor have two or more than two terminals (circle one)?
If two terminals check which applies.
__ Flat resistor chip
__ Cylindrical leadless resistor
If more than two terminals check which applies.
__ Dual–in-line package
__ Flat packs
__ Other than the above
Does the resistor have MORE than two leads? __ Yes __ No
If more than two leads check which applies.
__ Single-in-line
__ Dual-in-line
__ Other than Single-in-line or Dual-in-line
IF VARIABLE…
•
Is the resistor a wirewound variable resistor (including rheostats and potentiometers)?
__ Yes __ No
•
Is the resistor for a power handling capacity exceeding 20 W? __ Yes __ No
•
What is the designation of the variable resistor?
__ Dimmer
__ Metal oxide varistor
__ Rheostat and resistor type motor starter and controller
__ Cerment
__ Metal glaze
__ Other than the types listed above
46
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: SCREWS
1)
2)
3)
4)
5)
6)
What material is the screw made of? Please specify ie. iron, steel, stainless steel, aluminum etc.
What is the diameter of the shank or thread?
What is the length of the screw?
Does the screw have a hexagonal head (yes or no)?
Does screw have round head (yes or no ) ?
Please specify the type of screw:
___ coach screw
___ wood screw
___ screw hook or screw ring
___ self –tapping
___ machine screw, 9.5 mm or more in length and 3.2 mm or more in diameter
___ set screws
___ socket screws
___ cap screws
___ screw, other than above options
47
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: SEALS
2) Please specify what the seal is made of:
___ base metal
___ hard rubber
**note: if the seal is made of more than one material, specify the predominate
material above.
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
48
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: SPRINGS
1) Specify what the spring is made of:
___ iron or steel
___ copper (brass)
___ aluminum
___ plastic
___ material other than above options – specify: ___________________
2) If springs is made of iron or steel, please specify what type:
___ leaf springs, suitable for motor vehicle suspension
___ leaf springs, other than above*
*Please provide thickness of leaves: _______mm
___ helical springs, suitable for motor vehicle suspension
___ helical springs**, other than above
**Please provide the cross sectional dimension of the WIRE, (not the
spring)______mm
___ hairsprings
___ springs, other than all of the above options
Net weight in Kg per unit of measure: _______
___________________________________________________________________________
___________________________________________________________________________
__________________________________________________________________
49
PRODUCT FAMILY CLASSIFICATION GUIDE FOR:
SWITCHES
1) Please specify VOLTAGE :_________Volts
A) For a voltage over 1,000 V, please indicate what kind of switch this is:
___ Fuses
__ fuse of 2300 v or more
__ fuse of less than 2300 V
___ Automatic Circuit breaker
____for a voltage less than 72.5 kV
____in circuits of 345 kV or more
___ Isolating switch
___ Made-and-break switch
___ Switch other than above options
B) For a voltage under 1,000 V, please choose ONE of the following:
___ Fuse
___ fuse in glass cartridge
___ fuse not in glass cartridge
___ Automatic Circuit breaker
a)molded case
b) other
___ Relay switch, for a voltage not exceeding 60V**see below:
___ Relay switch, for a voltage exceeding 60V**see below:
**Please provide the following for ALL RELAY switches:
1) Contact rating: _____Amps
2) Circle one: a)Electromechanical
b)Contactors
c)Other
___ Electronic AC switch (insulated thyristor, chip-on-chip,
electromechanical snap-action for a current not exceeding 11 amps
___ Rotary switch, rated at not over 5 A
___ Rotary switch, rated at over 5 A
___ Push-button, rated at not over 5 A
___ Push-button, rated at over 5 A
50
___ Snap-action switch, other than limit switches
___ Knife switch
___ Slide switch
___ Limit switch
___ Switches other than above options
__________________________________________________________________________________
______________________________________________________________
51
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: TRANSMISSIONS
1) Specify type:
___ Camshaft
___ Crankshaft
___ Transmission shaft, other than camshafts or crankshafts
2) Is it designed for use principally with spark-ignition internal combustion piston or rotary engines
(yes or no)?
3) Net weight in Kg per piece ___________
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
52
PRODUCT FAMILY CLASSIFICATION GUIDE FOR: WASHERS
1) Please specify type of washer:
___ spring washer
___ helical spring lock washer
___ lock washer, other than helical spring
___ washer, other than options listed above
2) Please specify which material washer is made of:
___ agglomerated cork
___ aluminum
___ copper
___ iron/steel
___ natural cork
___ plastics
___ other, please specify
3) Net weight in Kg per unit of measure: ____________
__________________________________________________________________________________
__________________________________________________________________________________
____________________________________________________
53
PRODUCT GUIDE SHEET FOR STRANDED WIRE ,CABLES,
PLAITED BANDS, ETC. NOT ELECTRICALLY INSULATED.
Please choose the proper component of the wire, cable etc. and answer yes or no to the questions that
follow that component:
1. If the wire, cable, etc. is made of ALUMINUM:
a. Is it fitted with fittings and made up into articles?
b. Does it have a steel core?
c. Is it an electrical conductor?
2. If the wire, cable etc. is made of COPPER:
a. Is it fitted with fittings or made up into articles?
b. Is it stranded wire?
c. Is it a sling?
3. If the wire , cable etc. is made of IRON or STEEL:
a. Is it stranded wire?
b. Is it made of stainless steel?
c. Is it fitted with fittings or made up into articles ?
d. Is it tire cord?
e. Does it have a lay or twist of not more than 1 revolution for a length equal to the stand
diameter multiplied by 8.5?
f. If other than stainless steel , also answer the following:
i. Is it for prestressing concrete?
ii. Is it covered with textile or other nonmetallic material?
iii. Is it brass plated?
iv. Is it galvanized?
v. Is it ACSR core strand?
g. If other than stranded wire ,also answer the following:
i. Does the diameter exceed 9.5 mm?
ii. Is it galvanized?
iii. Is it brass plated?
Part#___________________________________________
54
GENERAL GOODS
The following information is for part number:
1)
2)
3)
4)
5)
6)
7)
What material is it made of?
What is the Net weight in Kg?
What machine is this a part of?
Can this item function without the machine it is a part of?
Can the machine run without this part?
What is the function of this item?
What are the components that make up this unit?
55
INDICATOR PANELS – and parts of
1) Does this panel incorporate LCD (liquid crystal devices)?
_________________________
2) Does this panel incorporate LED (light emitting
diodes)?__________________________
3) Does this panel incorporate electric discharge(fluorescent
devices)?_________________
4) Does this panel incorporate
horns?___________________________________________5) Does this panel incorporate other sound signaling
apparatus?______________________
6) What other type of indicators are
used?_______________________________________
7) Is this a printed circuit assembly for an indicator panel? If yes, what type panel above is
it a part of (1-6)______________
8) If this a part of an indicator panel, what part is it & what type panel above is it a part of
(1-6)______________________
9) What machine is this a Panel of part of panel for(mailing machine, meter…)__________
10) What is this item’s part number?_____________________________
56
INK – Guide Sheet
1) What is the Net Weight in kg ______________________
Complete and submit TSCA form
2) What Color_____________________________________
3) If Printing Ink please specify type a-f
a)
b)
c)
d)
e)
f)
News
Flexographic
Gravure
Letterpress
Offset lithographic
Other
4) Is it drawing Ink___________________
5) Other than Printing or drawing Ink __________________________
57
PRINTED CIRCUITS
1) What does the assembly consist of? List all electronic component, connectors,
switches, and other items.
2) Describe function of each component?
3) In what device will this be used?
4) What role will the printed circuit assembly play within the device it gets assembled
into?
5) If this is a speed drive controller, where will it be used? What is the role or function of
the speed drive controller?
6) Is it a power board? If so what is it powering?
7) What is the voltage capacity?
58
PRINTERS
1) Is this an assembled unit with at least the media transport control and print
mechanism?___________
2) What type of print mechanism?
a) Laser – How many pages per minute________
b) Light bar – electronic type________________
c) Ink Jet ________________________________
d) Thermal Transfer________________________
e) Ionographic_____________________________
f) Other
Daisy Wheel _____________________
Dot Matrix _______________________
Other____________________________
3) What is the part number for this information?____________
59
SCALES
1) What is the Max capacity in Kg?_______________
2) Is this a continuous weighing scale on a convetor?__________________
3) Is this a Constant weight scale for discharging a predetermined weight of material into a container or bag
(including hopper style)?_________________________
4) Is this a Digital Scale?_________________________________________
If Digital
i. Is it for counting?__________________
ii. Retail Scale, non computing?_________
iii. Retail Scale, computing?_____________
iv. Other Digital Scale_________________
5) Other type Non-Digital Scale?______________________________________
6) This information pertains to Part number______________________________
60

COMMERCIAL INVOICE DETAILS

Transcription

Similar documents

Financial Settings

Original Green™ Diamond - Popp Dental Supply, LLC

Combination Invoice Form

completely

CANADA 4th QUARTER 2015 SPECIALS

Denticator - Arnold Dental Supply

Retourformulier.nieuw engels omtrek

KRS Bearing

Where to submit invoices for GE? iSupplier Portal (iSP)

PLASTIGAUGE®