vl - Jan Willem Boon

Transcription

2016 Catalog
€
prices
in euro
´30-´36 VL Models
Jan Willem Boon
Meppelerweg 3
7963 RV Ruinen
The Netherlands
Phone: +31 (0)522-471177
Fax: +31 (0)522-473433
E-mail:
jw@jwboon.com
Web: www.jwboon.com
How to use this catalog:
Part number:
All numbers that begin with a letter
(R, C) are reproduction parts, other
numbers are original Harley parts
(new old stock).
€
Price:
Prices are in Euro’s.
Prices include sales-tax.
Sales-tax will be deducted on
shipments outside the EC.
Sales-tax is 21%, except books (6%).
Refers to letter in picture.
In this case you can choose
between four part numbers.
A.
“
“
“
B.
“
2326-38
R2326-38P
R2326-38
R2326-38C
C8115-1
C8114-1
Hex plug
Hex plug
Hex plug
Hex plug
Hex plug
Hex plug
´38-´51
´38-´51
´38-´51
´38-´51
´52-´73
´52-´73
park
park
cad
chrome
cad
chrome
Finish of the part:
park = parkerized (black)
cad = cadmium plated
15.00
8.50
8.50
12.00
7.00
11.00
✪
✪
✪
✪
✪
✪
The little star ✪ means the part was
manufactured in the USA.
No star means not USA-made or we do not know.
(we rely on information from our suppliers)
How to order:
Info:
You can order by phone, fax, e-mail, or website form.
Pictures in this catalog are for illustration purpose only, do
not use for technical reference.
Most paper gaskets need to be soaked in water for 10
minutes to regain their original size.
When ordering parts you need to give your name and
address, and the list of part numbers you require.
The part numbers are the bold printed numbers in this
catalog.
You must use part numbers from this catalog, do not use
Harley “oem” part numbers.
Payment and shipping depend on the size of the order, and
to which country it is shipped. Actual shipping cost.
Jan Willem Boon
Meppelerweg 3
7963 RV Ruinen
The Netherlands
+31 (0)522-471177
+31 (0)522-473433
jw@jwboon.com
www.jwboon.com
mailorder only
The Harley-Davidson part numbers are for reference only.
For up to date information check our on-line database:
www.jwboon.com
Minimum order: € 75.00
Phone:
Fax:
E-mail:
Web:
Visa card and Master card are
accepted. Include card number and
expiration date with order.
About nuts:
Early 1940's and earlier nuts
were mostly manufactured
by H-D and were machined
from stock. These nuts are
clearly different than the
later style nuts.
Hex bolt head markings:
´41 and earlier bolts were usually
made by Harley and were not
marked (plain head). War-time
production saw the arrival of
other suppliers, these could be
marked "1035 cp" or “1038cp”
See the “Bolts and Nuts”
section in the back of this
catalog for a complete list
See the “Bolts and Nuts” section in
the back of this catalog for a
complete list
9.00-17.00 weekdays
Contents
Manuals
Spare Parts Catalogs
Service Manuals
Service Department Bulletins (Shop Dope)
”The Enthusiast”
Owner’s Manuals / Riders Handbooks
Accessory Catalogs
Miscellaneous Books
Upper Engine Parts
Stock Hardware Kit
Cylinder Head Gaskets
Cylinder Head Bolts
Cylinder Base
Spark Plugs
Valves
Valve Spring Covers
Tappets
Pistons
Lower Engine Parts
Connecting Rod Bearing
Engine Shafts
Crankcase Bearings
Motor Mounting, lower
Top Motor Mount
Crankcase Bolts and Studs
Timing Hole Plugs
Exhaust systems
Carburetor Manifold Parts
Generator
Timer / Spark Coil
Chains & Sprockets
Starter Pedal
Shifter Parts
Clutch Parts
Fork Parts
Steering Damper
Rear Chain Adjusters
Rear Stand Parts
Footboards
Solo Seat
Seat Post
Handlebar Parts
2
2
2
2
3
3
3
4
7
7
7
7
7
8
8
9
9
10
11
11
11
12
12
12
12
13
14
14
16
18
19
19
20
20
21
22
22
22
22
23
24
25
Petrol & Oil Tank
Petrol & Oil Tank / Tool Box
Tool Box Parts
Petrol & Oil Lines
Petrol Filter, ´32-´36
Fender
Chainguard / Axle
Rear Axle Parts
Rear Brake
Front Brake
Electrical
Battery Box Parts
Wiring Kit
Switches / Horn
Relay
Horn Mounting Parts
´35-´36 Headlamp and Parts
Taillight Lenses
Accessories
Ride Control Parts ´33-´36
Roller Bearing Roller Guide
Tools
Heli-Coil® / Special size Taps & Dies
Taps and Dies, Special Sizes
Taps, Dies, Drills
Drills
Screws, Bolts, Nuts
Round Head Screws
Fillister Head Screws
Oval Countersunk Head Screws
Hex Head Bolts
Nuts
Washers
Lockwashers
Steel Balls
Rivets
Special lockwashers
Grease Fittings
Cotter pins
Standard Hardware
phone: +31 (0)522 471177 | fax: +31 (0)522 473433 | e-mail: jw@jwboon.com
26
27
27
28
28
29
30
30
31
32
34
34
34
35
35
35
36
36
37
38
38
39
40
40
41
41
42
42
42
42
43
44
45
46
46
46
46
46
46
47
1
€
prices
in euro
Manuals
Spare Parts Catalogs
Essential information for restoring your Harley-Davidson.
Books 500 to 503 have photos, later books have exploded views.
L500 ´13-´21 Twins
L501A ´22-´28 all except opposed Twin
L502 ´28-´32 all models
95 p.
90 p.
105 p.
16.00 ✪
12.00
15.00
L516
L503
´26-´39 all models
´30-´40 Twins
175 p.
150 p.
20.00 ✪
22.00
L504
´37-´49 Big Twins
148 p.
15.00
L505
L541
L542
´40-´50 750cc civilian and Servi-car
´40-´43 WLA military models
´42-´43 WLC (Canada) military
124 p.
124 p.
60 p.
15.00
15.00
25.00
L506
L508
´49-´57 Twins incl. Servi-car
´58-´73 Servi-car
156 p.
127 p.
18.00 ✪
16.00 ✪
L507A ´54-´65 KH, XLH, XLCH
99451-80 ´79-´80 Sportster
106 p.
104 p.
18.00 ✪
45.00 ✪
L498
L499
52 p.
62 p.
16.00 ✪
16.00 ✪
149 p.
233 p.
104 p.
141 p.
15.00
45.00
45.00
45.00
45 p.
16.00
´48-´55 Lightweight models
´56-´65 Lightweight models
L509A
99455-80
99438-80
99438-82
´58-´68 Panhead/Shovel
´71-´80 FX
1980 FLT
´80-´82 FLT
✪
✪
✪
✪
Service Manuals
L525
1928 Schebler Carburetor Manual
L543
´41-´45 WLA Maintenance Manual 206 p.
16.00
This manual contains assembly, maintenance,
organisational and test procedures for WLA or other 750cc
models. Army #TM 9-879, use with overhaul manual L544.
L544
´41-´45 WLA Overhaul Manual
216 p.
16.00
Best manual available for all 750cc models ´41-up.
Army #TM 9-1879, use with L543 maintenance manual.
L546
1942 Uncrating and Assembly
WLA, full page photos.
L547
1943 Motorcycle mechanics book
134 p.
WLA and XA. “The Armored School”, Fort Knox.
20.00
L548
WLC Service and operators manual
14.00
L521
L522
Service Manual ´40-´47 Big Twins
Service Manual ´48-´57 Panhead
21 p.
80 p.
7.50
15.00 ✪
n.a.
99485-84
99483-80
99483-81
Sidecar Manual ´79-´84 CLE/TLE
Service Manual 1980 FLT
Service Manual ´80-´81 FLT
30.00 ✪
45.00 ✪
45.00 ✪
99498-77
L536
Service Manual ´77-´78 XLCR
Service Manual ´59-´66 Lightweights
50.00 ✪
17.00 ✪
Service Department Bulletins (Shop Dope)
Collections of bulletins the factory sent to the dealers.
L530
L531
L532
2
Volume I
Volume II
Volume III
All models
?-´29
All models ´30-´40
All models ´41-´56
18.00 ✪
18.00 ✪
18.00 ✪
prices
in euro
€
Manuals
Owner’s Manuals / Riders Handbooks
Includes wiring diagram, lubricating instructions, adjustments, etc.
L561
L562
L563
L587
L545
1926
Singles
36 p.
1929
´20’s Pocket-valves 63 p.
(includes supplement covering ´15-´29 models)
1935
750cc (R models)
40 p.
1936
VL models
40 p.
´43 WLC, also WLA and WL
36 p.
n.a.
9.00
9.00 ✪
9.00 ✪
9.00
L565C
L565A
L565B
1950
1955
´58-´64
Panhead
Panhead
Panhead
54 p.
68 p.
60 p.
11.00 ✪
11.00 ✪
11.00 ✪
L583
L583A
L584
L585
L586
1976
1977
1978
1978½
1979
FL, FX
FL, FX
FL, FX
FL, FX
FL, FX
70 p.
72 p.
76 p.
80 p.
80 p.
15.00
15.00
15.00
15.00
15.00
✪
✪
✪
✪
✪
L576
L576B
L577
L578
L578A
L571
L579
L569
1972
1974
1975
1976
1977
1977
1978
1981
Sportster
Sportster
Sportster
Sportster
Sportster
XLCR
Sportster
FLT
60 p.
60 p.
60 p.
60 p.
64 p.
56 p.
64 p.
118 p.
20.00
17.00
15.00
15.00
15.00
20.00
15.00
15.00
✪
✪
✪
✪
✪
✪
✪
✪
Accessory Catalogs
”The Enthusiast”
Every year, usually late summer, the new models were announced in
“The Enthusiast”. Now you have an opportunity to buy the issue that
announced your Harley, 1924 to 1958, barring World War II years. These
Enhusiasts are also fascinating period magazines often with articles,
letters and pictures from all over the world, technical hints, race reports,
police department news, etc.
Quality reprints, 21½ x 14 cm. , about 24 pages.
L151 1924 models
L168 1941 models
L152 1925 models
L169 1947 models
L153 1926 models
L170 1948 models
L154 1927 models
L171 1949 models
L155 1928 models
L172 1950 models
L156 1929 models
L173 1951 models
L157 1930 models
L174 1952 models
L158 1931 models
L175 1953 models
L159 1932 models
L176 1954 models
L160 1933 models
L177 1955 models
L161 1934 models
L178 1956 models
L162 1935 models
L179 1957 models
L163 not available
L180 1958 models
L164 1937 models
L165 1938 models
Military Editions
L166 1939 models
L181 October 1942
L167 1940 models
L182 December 1942
1 copy
6 copies
12 copies
9.00 ✪
32.00 ✪
60.00 ✪
Showing all accessories available that year, including buddy-seats,
saddlebags mirrors, spotlights, wind screens, lap aprons, air cleaners,
clothing, hats, badges, police accessories, tools, special workshop tools,
goggles, etc, etc.
L550
1918-1919
94 p.
16.00
L552
1934
32 p.
12.00 ✪
L553
1936
32 p.
9.00
L554
1941
72 p.
15.00 ✪
L555
1947
69 p.
15.00
L556
1957
60 p.
15.00 ✪
L557
1960
30 p.
15.00 ✪
L590
L591
L534
1916 Sales Brochure
1917 Sales Brochure
1950 WR/WRTT sales brochure
www.jwboon.com
24 p.
5 p.
4 p.
15.00 ✪
3.00
7.00
3
Miscellaneous Books
“ Cross Index of Harley-Davidson Part Numbers”
Parts catalogs from 1950 and earlier use the “old” part numbers,
1951 and later parts catalogs use the “new” parts numbers.
This manual is a cross-index between the old and new numbers.
L593 Cross index of H-D part numbers
53 pages
18.00
“Harley-Davidson Flatheads”
“The Big Book Of Harley-Davidson”
by Jerry Hatfield
One of the most versatile motorcycles ever built, the Flathead anchors
the Harley-Davidson lineage. Flathead engines powered The Motor
Company’s success in the 1930s when a fourth of all workers were laid
off, and were the Army’s “weapon of choice” during World War II. Author
Jerry Hatfield chronicles 55 years of the type’s engineering, military
service, racing adventures, and sales success. Restorers will find this
book indispensible, but any H-D enthusiast will enjoy this colorful factfilled account of The Motor Company’s jack-of-all-trades, the Flathead.
L645
Flatheads 128 pages
26.00
by Thomas C. Bolfert
1996 edition
Beautiful hard cover, full color, large size book,
10" x 12½" / 25 x 32 cm, 300 pages
Follow the trail of this American succes story as it winds through history,
decade by decade, influenced by wars, depressions, and severe
competition from domestic and foreign sources, only to emerge in the
1990´s stronger and more popular than ever. Told in an easy narrative
style, and illustrated by over a thousand colorful photos dating back to
the turn of the century, the story of Harley-Davidson is fitted against a
historical timeline that helps put its long past into the proper perspective of the prevailing times.
L619 Big Book of H-D
300 pages
70.00
4
Books
“H-D Classics 1903-1965”
“Motorcycle Memorabilia”
-Illustrated Buyer´s Guideby Jerry Hatfield
Harley-Davidson was synonymous with raw power and speed in the
early days of motorcycling. Those tremendous machines are chronicled
here, from the early singles to the Panhead Big Twins and Sportsters.
Each bike is covered year by year, with ratings for collectibility, smoothness of ride, passenger accommodations, reliability, and parts and
service availability. This formidable group of data is supplanted with the
author´s riding impressions, which put you in the driver´s seat of dozens
of collectible Harley-Davidson motorcycles. With this comprehensive
book, you´ll be well-equipped to select the year and model perfect for
your needs, whether it is a 1914 Twin with sidecar, 1941 WLD, 1936
Model EL Knucklehead, or 1957 Sportster.
L639
Buyer’s Guide 1903-1965
192 pages
20.00
by Roger Pribbenow.
Motorcycle Memorabilia is an enjoyable look at the sport of motorcycling from its beginning around 1900 to the mid-1960’s. Photographed
in full color are a great variety of items illustrating the scope of memorabilia collecting and items available to the collector. From catalogs and
brochures to motorcycle toys and clothing, manufacturers pins and oil
containers, you’ll find it all here. Covers all American-made motorcycles.
L647 Motorcycle Memorabilia
78 pages
18.00
“Classic H-D 1903-1941”
“Harley-Davidson in the 1960s”
by Herbert Wagner
Delving into the depths of Harley-Davidson history, author Herbert
Wagner brings readers many new discoveries on the evolution of the
Harley-Davidson Motorcycle. From the turn-of-the-century singlecylinder prototype to the 1941 74 OHV Big Twin Knucklehead, Classic
Harley-Davidson 1903-1941 captures the dream of Bill Harley and the
Davidson brothers. Over 80 color photographs help illustrate this
amazing story, depicting such models as: 1903 to 1905 Singles - Early Vtwins, World War I military models, JDH and JH models (two-cam)- 21"
and 45" OHV models - VL and VLH Flatheads - EL and FL Knuckleheads
L644
Classic H-D 1903-1941
96 pages
18.00
by Allan Girdler & Jeff Hackett.
“Harley-Davidson in the 1960s” chronicles The Motor Company's efforts
to survive the Asian onslaught, a struggle that transforms HarleyDavidson-a familiy run businness concern-into a division of AMF. In the
process it tells the story of some of the most exciting motorcycles of all
time. Covers all models; Duo-Glide, Early-Shovel, Sportster, KR-TT racer,
Sprint, Topper scooter, etc.
L655 H-D in the 1960's
95 pages
16.50
5
€
prices
in euro
6
prices
in euro
€
Upper Engine Parts
Stock Hardware Kit
This kit includes all the stock bolts, nuts, screws and washers to rebuild
the motor. Cad plated and parkerized as original.
C8323CAD Stock hardware kit early´30
cad/park
C8318CAD Stock hardware kit late´30-´36 cad/park
260.00 ✪
245.00 ✪
Cylinder Head Gaskets
R11-30
R11-36Acop
R11-36Ate
Gasket
.050" ´30-´35 blue teflon
Gasket, 9 bolt head ´36-only copper
Gasket, 9 bolt head ´36-only blue teflon
8.00
6.00
8.00
Cylinder Head Bolts
Cylinder Headbolt Kits
- Early 1930 only bolt has 7/16"-20 thread.
- Late 1930-1936 bolts have 7/16"-16 thread.
14-30
Head bolt early 1930 only
R14-30BP
Head bolt late ´30-´36
R14-30B
R14-30BC
R0232P
Washer, head bolt
0232
Washer, head bolt
R0232
Washer, head bolt
R0232C
Washer, head bolt
Kits include 18 bolts with washers, 7/16"-16 thread.
C9728-36
Headbolt kit
park
C7712-36
Headbolt kit
cad
C8218-36
Headbolt kit
chrome
14-30S
Oversize bolt
1/2"-13
✪
✪
✪
✪
✪
✪
✪
✪
park
park
cad
chrome
park
cad
cad
chrome
6.00
5.00
5.00
6.00
0.70
1.00
0.75
1.00
park
7.00 ✪
90.00 ✪
90.00 ✪
110.00 ✪
Heli-Coil® thread repair
Special 7/16"-16 thread for cylinder repair.
Heli-Coil thread repair kit comes complete with 6 inserts,tap, installation
tool and instructions. Order drill seperately.
H5540-7
Heli-Coil repair kit
7/16"-16
150.00 ✪
HR389-7-2
Set inserts only (6)
24.00 ✪
M6129D
Drill, use with kit
29/64"
15.00 ✪
Cylinder Base
R29-30
C8856-8
0134
R0134P
R0134
R0134C
R0134NI
R0265P
R0265
R0265C
Stud, cylinder base
Set cylinder base studs
Nut, cylinder base
Nut, cylinder base
Nut, cylinder base
Nut, cylinder base
Nut, cylinder base
Lockwasher
Lockwasher
Lockwasher
Cylinder Base Nut Kits
Kits include 8 nuts with lockwashers
C9623-16
Stock nuts
C8105-16
Stock nuts
C8104-16
Stock nuts
C7017-16
Acorn nuts
C8437-16
Cap nuts
C9716-8
Lockwashers only
C8171-8
Lockwashers only
C9715-8
Lockwashers only
Stock
Acorn
Cap
R46-21
R46-21-X
Gasket, cylinder base
Gasket, cylinder base
park
park
cad
chrome
Nickle
park
zinc
chrome
3.85
30.00
2.00
1.35
1.45
2.50
2.50
0.55
0.60
0.75
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
park
cad
chrome
chrome
chrome
park
cad
chrome
14.00
14.00
20.00
20.00
21.00
4.30
4.50
5.30
✪
✪
✪
✪
✪
✪
✪
✪
rubber metal base
2.00 ✪
15.00 ✪
7
€
prices
in euro
Upper Engine Parts
Spark Plugs
R37-09A-6
R37-09A-7
Spark plug NGK (standard # 3 heat range) 3.50
Spark plug NGK (colder # 4 heat range)
3.50
40-08
Gasket, spark plug
1.50 ✪
R11929-40
Spark plug wrench
22.00
(This wrench is for use with original style spark plugs, 1-1/8" wrench size,
does not fit above plugs)
To repair stripped spark plug hole threads
18mm-1.50 thread
Kit includes piloted tap, installation tool and 24 inserts.
H5523-18
Thread repair kit
280.00 ✪
HR514-6
Set insert only (6)
24.00 ✪
Valves
A. R163-30
R165-30
Valve, inlet
Valve, exhaust
20.00
20.00
B.
"
"
R166-30
R166-30.1
R166-30.2
Valve guide
Valve guide
Valve guide
170-30
Valve collar, early 1930 only
4.00 ✪
R168-30B
R170-30A
R171-30
172-30
Valve spring
Collar
Collar
Keys, valve (2)
6.50
6.50
6.50
3.00 ✪
O.D.
oversize
oversize
0.596"
+.001"
+.002"
16.00 ✪
17.00 ✪
17.00 ✪
B.
A.
E.
D.
E.
F.
G.
late´30-´36
late´30-´36
late´30-´36
15-0016
Valve spring kit
late´30-´36
Includes springs, collars & keepers
70.00
D.
F.
G.
Valve Guide Drivers
- 3/8" driver can be used for 1200cc Flathead, Knuckle, Pan, Shovel etc.
- Set also includes drivers for 750cc and Sportster.
R1001-1
R1001
Driver
Set of three sizes
.370"
(3/8")
22.00 ✪
35.00 ✪
Valve Spring Covers
C2885-24
8
Set valve spring covers cad ´30-´36
175.00 ✪
15-0016
prices
in euro
€
Upper Engine Parts
Tappets
B.
“
“
R200-29
R200-29.005
R200-29.010
Tappet Std. O.D.
Tappet
Oversize
Tappet
Oversize
0.730"
+.005"
+.010"
n.a.
n.a.
n.a.
R200-29jims Tappet Std. O.D.
R200-29.005jims
Oversize
0.730"
+.005"
85.00 ✪
95.00 ✪
B.
J.
K.
C.
Tappets without holes, includes screw and nut.
C. R200-52
Tappet Std. O.D.
0.730"
“ R200-52.005 Tappet
Oversize
+.005"
“ R200-52.010 Tappet
Oversize
+.010"
“ R200-52.015 Tappet
Oversize
+.015"
“ R200-52.020 Tappet
Oversize
+.020"
“ R200-52.025 Tappet
Oversize
+.025"
“ R200-52.030 Tappet
Oversize
+.030"
“ R200-52.035 Tappet
Oversize
+.035"
“ R200-52.040 Tappet
Oversize
+.040"
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
55.00 ✪
56.00 ✪
56.00 ✪
D. R208-29
" R208-29set
E. R214-29
Tappet roller kit
Set tappet roller kits (4)
Pin only, tappet roller
10.00 ✪
34.00 ✪
0.60 ✪
F.
R221-40
R221-40A
G. 223-38
" R223-38
Screw, tappet
9/32"-32
Tappet screw & nut
Nut, tappet screw 9/32"-32
Nut, tappet screw 9/32"-32
5.50
7.25
3.50
2.00
H. 237-30
Gasket, tappet guide
1.00 ✪
✪
✪
✪
✪
H.
F.
G.
B.
E.
D.
Tappet Guide Screws
1/4"-24 thread
J. R057P
" R057
" R057C
" R057NI
K. R0365P
" R0365
park
cad
chrome
Nickle
park
zinc
0.90
0.95
1.75
1.75
0.30
0.25
✪
✪
✪
✪
✪
✪
Kits includes 8 screws with lockwashers
C9622-16
Kit, slotted head screws park
C8103-16
Kit, slotted head screws cad
C8102-16
Kit, slotted head screws chrome
C7131-8
Kit, acorn head screws chrome
C8447-8
Kit, cap head screws
chrome
C8760-16
Kit, allen head screws
chrome
11.50
12.00
13.00
24.00
24.50
15.50
✪
✪
✪
✪
✪
✪
Screw, slotted head
Screw, slotted head
Screw, slotted head
Screw, slotted head
Lockwasher
Lockwasher
Slotted
Acorn
M1421T
Cap
Tap 1/4"-24 for tappet guide screws
7.00 ✪
Repair kit includes 12 inserts, tap and installation tool, order drill
seperately.
H5540-4
Heli-coil thread repair kit
1/4"-24
125.00 ✪
HR389-4
Set Heli-coil inserts only
(12)
24.00 ✪
M6117D
Drill 17/64", use with kit
5.00 ✪
9
€
prices
in euro
Pistons
Pistons
Piston Ring Sets
´30-´36 74" (1200cc)
Pistons are sold each, including:
- 1/16" compression rings, 3/16" oil ring
- piston pin with late style pin keepers ( 22582-52 )
( install with tool R96780-58A )
Set is for two pistons (6 rings)
- 1/16" compression rings, 3/16" oil rings
R256-30B
R256-30D
R256-30E
R256-30F
R256-30G
R256-30H
R256-30JA
R256-30KA
R256-30MA
R256-30Q
Piston
Piston
Piston
Piston
Piston
Piston
Piston
Piston
Piston
Piston
standard
oversize
oversize
oversize
oversize
oversize
oversize
oversize
oversize
oversize
3.437"
+.010"
+.020"
+.030"
+.040"
+.050"
+.060"
+.070"
+.080"
+.090"
R262-37
R262-37D
R262-37E
R262-37F
R262-37G
R262-37H
R262-37JA
R262-37KA
R262-37MA
R262-37Q
87,27 mm
87,52 mm
87,77 mm
88,02 mm
88,26 mm
88,53 mm
88,79 mm
89,05 mm
89,30 mm
89,55 mm
Ring set
Ring set
Ring set
Ring set
Ring set
Ring set
Ring set
Ring set
Ring set
Ring set
standard
oversize
oversize
oversize
oversize
oversize
oversize
oversize
oversize
oversize
+.010"
+.020"
+.030"
+.040"
+.050"
+.060"
+.070"
+.080"
+.090"
45.00
45.00
45.00
45.00
45.00
45.00
45.00
45.00
45.00
45.00
280-32
Lock ring, piston pin split ring type
n.a.
R280-32
Lock ring, piston pin split ring type
n.a.
This type lock ring is used on original pistons, install. tool R96780-32A
R22582-52
Lock ring, piston pin expanding ring type 0.80
These lock rings are used with above pistons, install. tool R96780-58A
R295-36
R295-36B
R295-36C
R294-36A
R294-36B
R294-36C
Bushing, piston pin
Bushing, piston pin
Bushing, piston pin
Bushing, piston pin
Bushing, piston pin
Bushing, piston pin
Piston Tools
R96780-32A
R96780-58A
Piston pin lock ring tool, for 280-32
Piston pin lock ring tool, for 22582-52
R95970-32C
Piston pin bushing tool
Use to replace bushings without removing rods
39.00 ✪
115.00 ✪
110.00 ✪
R96780-32A
R95970-32C
R1235
R1236
Piston ring compressor set
85.00 ✪
Supplied with 6 bands ranging from 2-3/16" to 4-3/8" (does not fit 750cc
models). Fine tooth ratcheting motion to compress bands in small
increments for accurate compression. (will not break or damage rings)
R1235
Piston ring expander tool
24.00 ✪
Remove and install rings without fear of breakage.
Smooth gripping edges firmly hold rings to eliminate possible ring
damage. Expands rings gently to install in grooves.
10
R1236
0.896" O.D.
0.902" O.D.
0.907" O.D.
1.006" O.D.
1.008" O.D.
1.011" O.D.
4.00
4.00
4.00
12.50 ✪
13.00 ✪
13.00 ✪
prices
in euro
€
Lower Engine Parts
Connecting Rod Bearing
95.00 ✪
CRR-KZK
Set of rod races (3)
(Timken bearing steel)
R305-15
305-15D
305-15F
305-15H
305-15KA
R305-15MA
Roller, standard
Roller, oversize
Roller, oversize
Roller, oversize
Roller, oversize
Roller, oversize
0.2498" x .726"
+.0002"
+.0004"
+.0006"
+.0008"
+.0010"
0.60
n.a.
1.50
1.50
1.50
0.60
✪
R304-15
R304-15D
R304-15F
304-15H
304-15KA
304-15MA
Roller, standard
Roller, oversize
Roller, oversize
Roller, oversize
Roller, oversize
Roller, oversize
0.2498" x .360"
+.0002"
+.0004"
+.0006"
+.0008"
+.0010"
0.60
0.60
0.60
1.00
1.00
1.00
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
Rod Bearing Tools
R1003
Rod race removal & installation tool
165.00 ✪
Kit includes collars for use on all Big Twin, 750cc and Sportster rods.
R11944-X
R96740-36-4
Rod lapping arbor
Replacement lap head
1-1/2"
1-1/2"
185.00 ✪
140.00 ✪
R96740-36
Rod lapping set
325.00 ✪
Includes 1-1/2" & 1-5/8" lap to lap all connecting rod races from 1915
and later.
R1003
R96740-36-4
R11944-X
Engine Shafts
Crank pin (Jims)
Crank pin (Eastern)
Sprocket shaft
Gear shaft, includes pinion nut
R365-15
R364-30
1650-18
Nut, crank pin
Nut, sprocket and gear shaft
Key, crank pin
9.00 ✪
6.00 ✪
2.00 ✪
R361-12
R030Z
Key, sprocket & gear shaft
Screw, shaft nut lockwashers
1.45 ✪
0.30 ✪
R358-17A
Set of flywheel thrust collars (11 sizes)
372-21
R372-21
R372-21B
R372-21C
R11967-38
Washer, flywheelStd. .055" (1,39 mm) ´30-´35
Washer, flywheelStd. .055" (1,39 mm) ´30-´35
Washer, flywheel O.S. .060" (1,52 mm) ´30-´35
Washer, flywheel O.S. .067" (1,70 mm) ´30-´35
End play gauge
95.00
95.00
55.00
145.00
✪
✪
✪
✪
R348-15
R348-30
R352-30
R355-30
42.00 ✪
10.00
7.00
8.50
9.00
✪
✪
✪
✪
45.00 ✪
11
€
prices
in euro
Lower Engine Parts
Crankcase Bearings
L.
"
"
"
"
"
"
"
"
"
43.00 ✪
R413-30
Right crankcase bushing
R416-30
R416-30B
R416-30C
R416-30D
417-30
Left bearing race std. O.D.
Left bearing race oversize
Retainer, left bearing roller
R2289-25
R9219
R2289-25D
R9218
R2289-25F
R9217
R2289-25H
R2289-25KA
R2289-25MA
R2289-25MA2
Roller, standard
Roller, oversize
Roller, oversize
Roller, oversize
Roller, oversize
Roller, oversize
Roller, oversize
Roller, oversize
Roller, oversize
Roller, oversize
2.002"
+.002"
+.005"
+.010"
70.00
71.00
72.00
73.00
20.00
✪
✪
✪
✪
✪
0.2498" x .490"
+.0001"
+.0002"
+.0003"
+.0004"
+.0005"
+.0006"
+.0008"
+.0010"
+.0020"
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
Motor Mounting, lower
5.00 ✪
5.00 ✪
6.00 ✪
Washer
Washer
Washer
Washer
park
cad
chrome
Nickle
0.50
0.50
0.70
0.70
✪
✪
✪
✪
0128
R0128P
R0128
R0128C
R0128NI
Castle nut
Castle nut
Castle nut
Castle nut
Castle nut
park
park
cad
chrome
Nickle
2.50
1.60
1.70
1.85
2.00
✪
✪
✪
✪
✪
R0291P
R0291
Cotter pin
Cotter pin
park
zinc
0.15
0.15
Bolt
Bolt
Bolt
R0224P
R0224
R0224C
R0224NI
All bearings include original (new old stock) retainers.
R419-30
Bearing, sprocket shaft
standard
R419-30C
+.0001"
R419-30D
+.0002"
R419-30E
+.0003"
R419-30F
+.0004"
R419-30G
+.0005"
R419-30H
+.0006"
R419-30KA
+.0008"
R419-30MA
+.0010"
R419-30MA2 Bearing, sprocket shaft
+.0020"
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
50.00
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
Motor Mount Kits, lower
park
cad
chrome
R437-26P
R437-26
R437-26C
B413-30
“1035 cp”
“1035 cp”
Top Motor Mount
Complete kits include bolts, nuts, washers, cotter pins
C9626-16
Kit
“1035 cp”
park
C8825-16
Kit
“1035 cp”
cad
C9625-16
Kit
chrome
31.50 ✪
32.50 ✪
36.00 ✪
Top Motor Mount Kits
Mounts cylinder head bracket to frame
2807-30
Bolt
2641-30
Nut
R0231P
Washer
R0234
Shim .015"
✪
✪
✪
✪
park
park
park
5.00
2.00
1.00
0.60
park
cad
chrome
3.50 ✪
3.50 ✪
4.25 ✪
black
cad
zinc
black
cad
6.00
6.00
6.00
6.00
6.00
✪
✪
✪
✪
✪
park
cad
chrome
Nickle
0.95
1.00
0.75
1.35
✪
✪
✪
✪
Include bolt, nut, washer, lockwasher and shims.
C9781-5
Mounting kit
park
C9780-5
Mounting kit
cad
C9779-5
Mounting kit
chrome
9.00 ✪
9.00 ✪
12.00 ✪
Crankcase Bolts and Studs
R444-30P
R444-30
R444-30C
Bolt, crankcase
Bolt, crankcase
Bolt, crankcase
R446-30
R446-30cad
447-30
R447-30
R447-30cad
Stud, crankcase
Stud, crankcase
Stud, crankcase
Stud, crankcase
Stud, crankcase
R0117P
R0117M
R0117C
R0117NI
Nut, crankcase stud
Nut, crankcase stud
Nut, crankcase stud
Nut, crankcase stud
5"
5"
6"
6"
6"
R472-30
12
Chain guard stud
cad
8.00 ✪
prices
in euro
€
Lower Engine Parts
Timing Hole Plugs
´31-´36 Standard size plugs 5/8"-18 thread
2326-26
Timing hole plug
R2326-26P
Timing hole plug
R2326-26
Timing hole plug
R2326-26C
Timing hole plug
12.00
8.00
8.50
10.00
✪
✪
✪
✪
Oversize plugs, to repair stripped threads 11/16"-16 thread
Note: oversize plugs are late style with 3/4" hex size (wrench size).
C9714-1
Oversize plug
park
5.00
C9404-1
Oversize plug
cad
5.00
C9304-1
Oversize plug
chrome
7.50
C9407-1
Tap
11/16"-16
36.00
C2282-1
Special tap can be used on assemb. cases
36.00
✪
✪
✪
✪
✪
park
park
cad
chrome
Heli-Coil® thread repair, 5/8"-18
Repair kit includes 6 inserts, tap and installation tool.
H5528-10-2
Thread repair kit
5/8"-18 thread
HR1191-10-2 Set inserts only
(6)
R2326-26C
C9407-1
140.00 ✪
38.00 ✪
Gear Cover Screws
park
park
cad
chrome
Nickle
1.50
1.30
1.35
1.65
1.65
✪
✪
✪
✪
✪
Gear Cover Screw Sets, include 12 screws
C9621-12
Stock (slotted) heads
park
C8150-12
cad
C8149-12
chrome
C8755-12
Allen heads
chrome
C7129-12
Acorn heads
chrome
C8445-12
Cap heads
chrome
15.00
16.00
19.00
23.50
34.00
33.00
✪
✪
✪
✪
✪
✪
A.
B.
"
C.
D.
"
E.
R636-30A
620-30
R620-30
R636-30
644-30
R644-30
R658-15
Idler gear stud assembly
Bushing, idling gear
Bushing, idling gear
Stud, idling gear
Screw, idler gear stud
Screw, idler gear stud
Spring ring, idler gear stud
13.00
13.00
12.00
8.50
5.00
5.00
0.60
✪
✪
✪
✪
✪
F.
G.
H.
J.
R660-30
R662-29
R662-30
R662-34
661-31
R661-31
Bushing, cam gear shaft
Bushing, timer shaft, right
Bushing, cam gear shaft, right
Bushing, oiler drive shaft
´34-´36
Pin, cam bushing
´31-´36
Pin, cam bushing
´31-´36
17.00
24.00
21.00
21.00
0.80
0.30
✪
✪
✪
✪
✪
✪
R663-26
R664-26
Fibre washer, cam shaft
Fibre washer, cam shaft
1/64"
1/32"
1.00 ✪
1.00 ✪
R361-12
0142
R355-16
Key, pinion gear
Nut, pinion gear
Nut, pinion gear - left hand thread
1.45 ✪
3.50 ✪
8.50 ✪
672-32
R0202
674-32
Adjusting screw, chain oiler ´33-´36
Washer, adjusting screw
1/16"
Shim, adjusting screw
.002"
n.a.
0.60 ✪
0.80 ✪
713-34
716-34
717-34
724-34
726-34
Cam shaft end plate
Cam shaft lever screw
Lever clamp nut
Cam adjusting stud
Cam adjusting plate
056
R056P
R056
R056C
R056NI
Screw, gear cover
Screw, gear cover
Screw, gear cover
Screw, gear cover
Screw, gear cover
´34-´36
´34-´36
´34-´36
´34-´36
´34-´36
12.00
5.00
6.00
14.00
12.00
M1421T
die160-005
7.00 ✪
n.a.
1/4"-24
1/4"-24
H5540-4
Thread repair kit
1/4"-24
125.00 ✪
(includes 12 inserts, tap and installation tool, order drill seperately)
HR389-4
Set Heli-coil inserts only (12)
24.00 ✪
M6117D
Drill, use with repair kit 17/64"
5.00 ✪
A.
✪
✪
✪
✪
✪
✪
Tap
Die
D.
C.
B.
E.
G.
F.
R589-34
R680-34
H.
Gasket, oil pump
Gasket, oil pump
J.
´34-´36
´34-´36
2.00 ✪
2.00 ✪
13
€
prices
in euro
Exhaust
Exhaust System
R1004-30
R1034-30TT
R1034-30
R1034-34
Pipe set (2pcs)
Pipe set (2pcs)
chrome
138.00 ✪
172.00 ✪
R1007-30
R1007-30C
Rear pipe only
rear pipe only
chrome
23.00 ✪
28.00 ✪
R1034-30TT
Muffler, twin tube, 1930
R1034-30
R1034-30C
Muffler
Muffler
chrome
105.00 ✪
135.00 ✪
R1034-34
R1034-34C
R1070-34
Muffler, 1934 style
Muffler, 1934 style
Rear hanger clamp 1934
chrome
park
118.00 ✪
140.00 ✪
21.00 ✪
R1064-32
R1064-32C
Rear muffler clamp ´32-´36
Rear muffler clamp ´32-´36 chrome
7.50 ✪
11.50 ✪
R1061-32
R1061-32C
R1061-32BP
Front pipe clamp
´32-´36 park
Front pipe clamp
´32-´36 chrome
Front clamp spacer, bolt and nut park
8.50 ✪
12.50 ✪
8.50 ✪
R1065-32
R1065-32C
Clamp reinforcement ´32-´36 park
Clamp reinforcement ´32-´36 chrome
5.50 ✪
8.50 ✪
295.00 ✪
R1030-32
Center exhaust clamp ´32-´36 park
32.00 ✪
R1030-32C
Center exhaust clamp ´32-´36 chrome
38.00 ✪
Mounts front of muffler to brake crossover tube, includes bolt and nut.
R1032-32
Clamp bolt only
´32-´36 park
9.00 ✪
R0123P
Nut only
´32-´36 park
1.20 ✪
R1061-32
R1030-32
R1065-32
R1004-30
R1004-30C
R1064-32
R1032-32P
R1061-32BP
Carburetor Manifold Parts
Nut
Nut
Nut
1-1/4" carbs
1-1/4" carbs
1-1/4" carbs
R1118-30
Bushing
1-1/4" carbs
1121-21
R1121-39
R1121-29
Gasket
Gasket
Gasket
1-1/4" carbs
1-1/4" carbs
1" carbs
1123-29
R1123-29
R1123-29C
Screw, 1/4"-24
Screw, 1/4"-24
Screw, 1/4"-24
1123-30
Screw, 5/16"-18 1-1/4" carbs park
2.50 ✪
R12002-30
Wrench
n.a.
1" carbs
1" carbs
1" carbs
1-1/4" carbs
park
cad
chrome
14.00 ✪
14.00 ✪
17.00 ✪
R1115-30P
R1115-30
R1115-30C
8.00 ✪
.005"
.062"
0.50 ✪
2.00 ✪
2.00 ✪
park
cad
chrome
1.50 ✪
2.50 ✪
3.25 ✪
Special Carburetor Taps and Dies
tap160-002
tap160-003
die160-008
14
Tap
Tap
Die
1/4"-40
1/4"-32
3/4"-20
15.00
10.00
n.a.
High speed needle valve (adjustable & non-adjustable), lever 1292-27.
Float lever pin and screw (1196-16, 1197-16), bowl drain screw (1269-39)
Bowl nut 1268-29 (to repair thread on carburetor body)
prices
in euro
€
Carburetor
A. R1152-11
B. R1153-11
C. R1154-11
Screw, needle valve adjusting
Lockscrew, needle valve
Lockspring, needle valve
zinc
E.
F.
G.
H.
R1261-27A
R1262-27
R1264-27
R1293-27
Low speed needle cpt. 1-1/4" carbs
Collar, spring
Spring, needle valve
Screw, needle valve lever
1251-33
R1251-33
1263-24
R1263-24
Plug, idle passage
´33-´36
Plug, idle passage
´33-´36
Plug screw, idle passage
Plug screw, idle passage
8.50
0.40 ✪
2.00
1231-33
1232-24
R1234-24
R1296-26
R1297-26
R010Z
Shaft, air intake
Disc, air intake
Screw, intake lever
Spring, friction
Ball, friction
Screw, intake disc
T.
"
"
"
U.
R1242-26
Throttle shaft
R1242-26o-ringThrottle shaft with seal
1243-24
Throttle shaft
R1243-24o-ringThrottle shaft with seal
1244-24
Throttle disc
R010Z
Screw, throttle disc
V. R1245-24
Bushing, throttle shaft
W. R1247-32
Spring, throttle shaft
´33-´36
´33-´36
1" carbs
1" carbs
1-1/4" carbs
1-1/4" carbs
1-1/4" carbs
´31-´36
C.
23.00 ✪
3.00
0.80 ✪
3.00 ✪
7.00 ✪
2.50
3.00 ✪
2.20
L. R1254-27
High speed needle valve 1-1/4" carbs
15.00
M. R1254-27S
High speed needle valve 1-1/4" carbs
16.00
This needle has extra long threads to be used when first part of thread
in carburetor is damaged. Clean up with 1/4"-40 tap first.
N.
O.
P.
R.
S.
B.
E.
A.
G.
L.
F.
H.
M.
?
?
4.20
0.80 ✪
0.35 ✪
0.30
12.50
13.00
14.00
13.50
13.00
0.30
3.00
1.00
✪
O.
W.
V.
N.
✪
V.
✪
✪
✪
S.
R.
P.
U.
R27376-52
2.00 ✪
1196-11
1197-16
Gasket, float bowl K-model
´52-´56
(will fit all Flathead models)
Pin, float lever except late´32 & ´33
Screw, lever pin except late´32 & ´33
R1265-29A
R1265-30A
C2822-1
R1265-30B
Venturi 7/8"
for 1" carburetor
Venturi 1-1/16" for 1-1/4" carburetor
+.025" oversize
Venturi 1-1/8" for 1-1/4" carburetor
38.00
38.00
38.75
40.00
R1271-33
R1272-33
R1272-33A
AA. R1273-33A
Float “Rubber Ducky”
Lever, float
Stud and screw, float mount
Float valve & seat
´33-´36
´33-´36
´33-´36
´33-´36
36.00 ✪
12.50
4.00
14.00
AE.
AB.
"
AC.
AD.
AE.
Cap, bowl
brass
Cap, bowl
cad
Washer, inlet nipple
Spring, nozzle
cad
Main nozzle
´33-´36
´33-´36
´33-´36
´33-´36
´33-´36
5.50 ✪
5.25 ✪
0.80 ✪
1.20
11.00
AD.
X.
"
"
"
Y.
Z.
R1275-33
R1275-33cad
R1285-33
R1257-33
R1258-33
AF. 1268-29
" R1268-29
" R1268-29C
R1269-28
AG. R1110-33
R0127P
R0127
R0127NI
Nut, bowl lock
Nut, bowl lock
Nut, bowl lock
Gasket, bowl lock nut
Bracket, support
Nut, support bracket
cad
cad
chrome
park ´33-´36
park
cad
Nickle
T.
7.00 ✪
3.00 ✪
15.00
11.00
13.00
1.65
9.00
1.20
1.30
1.60
AB.
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
AC.
X.
AA.
AF.
Z.
Y.
AG.
15
€
prices
in euro
Generator
Generator is ´32 and later type, complete unit will fit ´30-´36 models.
1501-32
Generator, 6 Volt “32E” three brush,
not available
complete except for drive gear and mounting screws.
R1527-30 Gasket, generator
R30144-32 Shim, paper, use 1, or more if neccesary
0.70 ✪
1.50 ✪
Mounting Parts
R1523-29A
R1523-30P
R1523-30
R1523-30C
Screw,
Screw,
Screw,
Screw,
fastening
fastening (late style)
A.
"
B.
"
1528-30
R1528-30C
R1529-30P
R1529-30
Strap, fastening
Strap, fastening
Washer,strap
Washer,strap
C.
D.
"
E.
"
"
"
F.
"
"
058
R0370P
R0370
R0117P
R0117M
R0117C
R0117NI
R0259P
R0259
R0259C
Screw, strap
Lockwasher
Lockwasher
Nut, strap
Nut, strap
Nut, strap
Nut, strap
Lockwasher
Lockwasher
Lockwasher
cad
park
cad
chrome
4.00
4.50
4.50
6.50
✪
✪
✪
✪
black
chrome
park
cad
?
n.a.
1.65 ✪
1.65 ✪
park
zinc
park
cad
chrome
Nickle
park
zinc
chrome
3.00
0.40
0.30
0.95
1.00
0.75
1.35
0.20
0.20
0.30
"late style"
A.
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
B.
F.
E.
D.
C.
M1421T
Tap, 1/4"-24 (mounting screws)
7.00 ✪
Thread repair kit includes tap, 12 inserts and installation tool.
H5540-4
Heli-Coil thread repair kit
1/4"-24
125.00 ✪
HR389-4
Set Heli-Coil inserts
(12)
24.00 ✪
M6117D
Drill, use with kit
17/64"
5.00 ✪
1696-32
R1696-32C
Cover, commutator
Cover, commutator
black
chrome
?✪
n.a.
R037P
R037
R037C
R037NI
R632-30
R634-32
Screw
Screw
Screw
Screw
Gear, generator
Pin, generator gear
park
cad
chrome
Nickle
0.50
0.55
0.90
0.90
7.00
0.45
✪
✪
✪
✪
Relay
Electronic, use with 32E three-brush generator.
“ V-Tronic”
R4785-26
Relay, without cover
´30-´36
R4786-26DR Cover
black ´30-´36
R4786-26DRC Cover
chrome ´30-´36
R051P
R051
R051C
Mounting screw
Mounting screw
Mounting screw
park
cad
chrome
38.00
14.50
17.00
1.15 ✪
1.20 ✪
2.10 ✪
R8375-47
Voltage regulator 6V
79.00
R8375-32
Voltage regulator 12V
77.00
Special electronic regulator designed to convert from three-brush to two-brush generators ´32-´57 models.
Without cover. (V-Tronic)
R4786-38DR Cover
black
14.00
R4786-38DRC Cover
chrome
16.50
16
prices
in euro
€
Generator
32E Generator Parts
B.
A. 1504-32M
B. 1505-32
C. R1506-32
H5521-1
Frame, includes field coils
End, frame
Screw, frame
12-24
Heli-Coil repair kit
12-24 thread
n.a.
n.a.
9.00 ✪
57.00 ✪
D. R1507-32
E. R1508-32
Field coil, shunt,
Field coil, regulating
25.00
25.00
F.
"
R010Z
1512-18
R1512-18
white dot
orange dot
Screw
Screw, pole shoe
Screw, pole shoe
D.
0.30
3.00 ✪
1.65 ✪
E.
F.
A.
C.
G. R037
R1636-32
H. 1641-30A
J. 1641-33
Screw, retainer
Armature, 6V
Retainer, oil, inner
Retainer, oil ,outer
K.
L.
M.
"
"
Armature end washer, fibre
Gasket, bearing housing
Washer (.033")
Washer (.070")
Washer (.072")
R1642-29
R1642-30
R1643-29
R1643-29S
1643-30
0.55 ✪
n.a.
7.00 ✪
7.00 ✪
cad
3.00
0.85
0.80
0.80
2.00
✪
✪
✪
✪
✪
Bearing, small
Bearing, large
10.00
10.00
P.
R.
R1646-31
1647-29A
1647-31A
S. 1647-31B
" R1647-31B
T. 1647-31C
U. 1647-31D
1647-31E
V. 1647-32
Oil deflector
Spring ring, bearing plate
Rivet, bearing housing
Spring, drive end
Spring, drive end
Washer, drive end felt
Ring, drive end spring
Plate, drive end felt washer
Housing, drive end bearing
8.00
2.00
0.50
2.00
1.00
1.50
3.00
5.00
17.00
W. R1660-32
X. 1661-32
Y. 1662-32
Positive brush holder assembly
Holder, main brush
Holder, third brush
44.00
12.00 ✪
?✪
R010Z
AA. R1663-32
AB. R1663-32A
Screw
Insulation, positive brush holder
Insulation, field coil terminal
0.30
0.85
0.60
AC.
AD.
AE.
AF.
AG.
AH.
"
Screw, positive terminal
Complete terminal
Bushing
Washer, insulating
Lockwasher
Nut, terminals
Nut, terminals “machined”
Die, 10-32 thread
3.50
6.75
1.50
1.40
0.20
0.70
1.30
8.00
copper
copper
Gasket
Screw, terminal
Nut, brush holder
1669-32A
R1669-32A
Brushes, set (3)
Brushes, set (3)
R1674-26
R1674-32
Spring only, third brush
Spring only, main brush
cad
M.
Y.
K.
✪
✪
✪
✪
✪
✪
✪
✪
✪
R.
AK.
V.
H.
S.
P.
O.
T.
U.
AD.
X.
AB.
✪
✪
AC.
AL.
X.
AA.
AE.
✪
✪
✪
AF.
AG.
AK. 1697-30
AL. R036
AM. 1667-32
G.
L.
N.
N. R1644-18
O. R1644-30
R1664-32
R1664-32A
R1665-32
R1666-32
R0354
0105cop
0105copM
M6131DI
J.
1.00 ✪
0.55 ✪
1.50 ✪
AM.
AD.
W.
AH.
AH.
20.00 ✪
7.00
1.0––0
1.00
17
€
prices
in euro
Timer / Spark Coil
R1569-30A
R1574-30
R018
Points set, breaker (with spring)
Spring only, breaker points
Screw, breaker points fastening
9.00
0.70 ✪
0.50 ✪
R1571-30
R035
Circuit breaker rebuild kit (stud) with tool 19.00 ✪
Screw, circuit breaker mounting cad
0.55 ✪
1618-30
R1629-30
R1629-47
Washer (fibre)
Condenser (original style)
Condenser (late style)
1.50 ✪
5.00
3.00
1614-18
Terminal and eyelet
3.00 ✪
R1569-30A
R1571-30
1614-18
R1629-47
Spark Coils
R1722-29K6
Coil, round model
6 Volt black
38.00
Includes late style mounting bracket, custom fit on ´47-earlier models.
Coil Mounting
A. R1723-29
R0107P
R0107C
U-bolt, with nuts
Nut only
Nut only
park
´30-´32
park
´30-´32
chrome ´30-´32
11.00 ✪
0.90 ✪
0.70 ✪
"
1723-30
0109
0109C
U-bolt, with nuts
Nut only
Nut only
park
´33-´36
park
´33-´36
chrome ´33-´36
9.75 ✪
2.00 ✪
2.30 ✪
B.
R1724-29
Strap, for U-bolt
´30-´36
11.00 ✪
C.
D.
E.
"
R1725-30P
R1726-30P
1728-30
R1728-30
Screw, coil mounting 1/4"-28 ´30-´32
Screw plate
1/4"-28 ´30-´32
Plate, coil mounting
´30-´32
Plate, coil mounting
´30-´32
1.50
4.50
22.00
11.50
C2327-23
Mounting kit
59.00 ✪
R021P
R021
R021C
Screw, coil terminal park
Screw, coil terminal cad
Screw, coil terminal chrome
0.50 ✪
0.50 ✪
0.60 ✪
R1596-32
R1595-35M
Kit, spark plug cable(hooked ends)
Spark plug cable, per meter
n.a.
n.a.
R1599-27
R1599-27A
R0211
C7804-6
Cable packing washer (seal) rubber
Cable packing nut
cad
Washer
Set packing nuts & washers cad
´30-´36
2.00
7.00
0.50
18.00
A.
B.
E.
✪
✪
✪
✪
C2327-23
C.
D.
✪
✪
✪
✪
C7804-6
18
prices
in euro
€
Chains & Sprockets
R2028-30
R2028-30B
R2030-30
R2030-30B
R2031-30
Motor sprocket
Motor sprocket
Motor sprocket
Motor sprocket
Motor sprocket
R2050-30
R361-12
Nut, motor sprocket
Key, motor sprocket
11.00 ✪
1.45 ✪
R2049-30A
R4034-30
2048-35kit
Rear wheel sprocket 51 T, with rivets
Dust ring, brake drum
Rivet & dowel pin kit
32.00
9.50
10.00 ✪
R2001-30D
R2003-102
R2003-110
Front chain
90 links
Rear chain 3/8" x 5/8" 102 links
Rear chain 3/8" x 5/8" 110 links
(chains include connecting link)
Link, connecting
"Diamond" rear
Link, double repair "Duckworth" rear
Link, connecting
"Duckworth" front
Link, double repair "Duckworth" front
80.00 ✪
65.00 ✪
70.00 ✪
R2080-16
2084-24
2092-16T
Lockwasher, starter crank
Spring, starter crank
Starter pedal, bicycle type
1.15
20.00 ✪
n.a.
R2092-17
R2092-17BL
R2092-17G
R2092-17R
R2092-17W
Rubber, pedal
Rubber, pedal
Rubber, pedal
Rubber, pedal
Rubber, pedal
black
blue
green
red
white
C2783-5
C2761-5
R0224P
R0261P
0129
R0129P
Pedal axle and cover kit
Pedal axle and cover kit
Washer, pedal axle
Lockwasher
Nut, pedal axle
Nut, pedal axle
park
cad
park
park
park
park
R2098-17A
R2099-29
End plate
End cover
cad
7.00 ✪
7.00 ✪
R2101-31
R2102-30
2100-16
R2100-41
R2100-41C
Bushing, pedal pin
Spring washer, pedal pin
Bolt
“dome head”
Bolt
Bolt
park
zinc
chrome
1.00
1.25
4.00 ✪
1.00
1.50
R0104P
R0104Z
R0104C
R0254P
R0254
R0254C
Nut, pedal rod
Nut, pedal rod
Nut, pedal rod
Lockwasher
Lockwasher
Lockwasher
park
zinc
chrome
park
zinc
chrome
0.40
0.40
0.50
0.20
0.20
0.30
✪
✪
✪
✪
✪
✪
2144-31
2155-31
R2155-31A
R2155-31B
Starter sector gear
Starter main shaft gear
Bushing, starter O.D. 0.924"
Bushing, starter O.D. 0.907"
´31-´36
´31-´36
´31-´36
´31-´36
85.00
85.00
16.00
19.00
✪
✪
✪
✪
Nickel
park
Nickel
park
43.50
40.00
28.00
27.00
✪
✪
✪
✪
park
park
40.00 ✪
27.00 ✪
2006-15
2015-15
2007-39
2015-39
21 T
22 T
23 T
24 T
25 T
n.a.
3.00
5.00
8.00
10.00
✪
✪
✪
✪
Starter
n.a.
5.00 ✪
5.00 ✪
5.00 ✪
n.a.
2084-24
Transmission cover mounting kits ´15-´30
C2377-36
Transmission top cover kit
C2379-36
C2381-24
Transmission side cover kit
C2382-24
Transmission cover mounting kits ´31-´36
C2380-36
C2383-24
29.50
29.50
0.50
0.20
1.50
1.15
✪
✪
✪
✪
✪
✪
2092-16T
2144-31
2155-31
19
€
prices
in euro
Shifter / Clutch
B.
Shifter Parts
A. 2205-31
Ball, gear shifter
" R2205-31B
Ball, gear shifter
" R2205-31C
Ball, gear shifter
(Shifter balls are ´41-up style)
B.
"
J.
K.
?
15.00
23.00
14.00 ✪
13.00 ✪
22.50 ✪
17.50 ✪
12.00 ✪
R0125P
Shifter rod
cad ´30-´35
Clevis, shifter rod end cad ´30-´36
Bolt, shifter rod end
cad ´30-´36
(includes collar 2226-30)
Nut, shifter shaft
park
´30-´36
R0112P
R0112
R0112NI
R0213P
R0213NI
Nut, cover stud
Nut, cover stud
Nut, cover stud
Washer, stud nut
Washer, stud nut
park
cad
Nickle
park
Nickle
R2272-25
R2272-31
R2284-25
R2285-25
Mainshaft
Mainshaft
Outer race, roller bearing
Inner race, roller bearing
(bearing rollers; see page 38)
R2287-17
Spring washer
R2288-17
Plate, roller bearing
1930
´31-´36
H.
J.
K.
G.
3.00
8.00 ✪
3.00 ✪
1.50 ✪
17.00
18.00
23.00 ✪
O. R2300-16
" R2300-32
P. R2308-16set
Countershaft
´30-´31
Countershaft
´32-´36
Set end play washers
( includes 7 washers; .076"-.100" )
Collar, countershaft bearing
Mounting collar, left std.
Mounting collar, left +.002"
Mounting collar, left +.005"
4.50
22.00
23.00
24.00
Nut, bottom stud
Drain plug, gear box
Screw, front chain adjuster
1.20 ✪
6.00 ✪
15.00 ✪
R0125P
T. R453-10A
U. R2328-25
F.
n.a.
n.a.
n.a.
n.a.
Gasket, side cover
Gasket, top cover
Oil retainer, small
Oil retainer, large
Bushing, main drive gear
R2309-16
R2312-16
R2312-16B
R2312-16C
D.
✪
✪
✪
✪
✪
R2132-26
R2261-15
L. R2163-15
M. R2294-15
N. R35094-65
R.
E.
1.20 ✪
1.00
1.10
1.20
0.40
0.50
C.
A.
Nut, shifter guide clamp chrome
Nut, shifter guide clamp Nickle
R2210-16C
R2210-16NI
C. R2212-30
D. R4068-14
E. R2225-30
F.
"
G.
H.
black ´31-´36
brass ´31-´36
chrome ´31-´36
´31-´36
park
cad
cad
n.a. ✪
58.00 ✪
35.00 ✪
N.
M.
L.
O.
✪
✪
✪
✪
R.
P.
U.
T.
Clutch Parts
C2352-1
0129
R0129P
0142
V.
W.
V. R2422-30
W. R2422-30A
" R2422-30AC
2423-30
0207
R0290P
R0290
Clevis, clutch rod, front
Clevis, clutch rod, rear
Clevis, clutch rod, rear
Pin, clutch rod clevis
Washer, clevis pin
Cotter pin, clevis pin
Cotter pin, clevis pin
X.
R2424-30
R0117P
R0117M
R0117C
R0117NI
Clutch rod
Nut, clutch rod
Nut, clutch rod
Nut, clutch rod
Nut, clutch rod
Z.
R2445-30
R0125P
R2470-15
Pull rod 13-9/16" long
Nut, pull rod
Key, clutch hub
X.
Z.
20
Spring stud (2411-32) ´32-´36 park
Nut, friction stud
´30-´35 park
Nut, friction stud
´30-´35 park
Nut, friction stud
´36
park
park
park
chrome
park
park
zinc
´30-´35 cad
park
cad
chrome
Nickle
park
park
8.50
1.50
1.15
3.50
✪
✪
✪
✪
17.00
14.00
6.00
1.00
1.00
0.15
0.15
✪
✪
22.50
0.95
1.00
0.75
1.35
✪
✪
✪
✪
✪
✪
✪
25.00 ✪
1.20 ✪
1.85
prices
in euro
€
Fork Parts
A.
"
"
"
"
R2634-30AP
R2634-30A
R2634-30AC
R2634-36
R2634-36C
Top nut
Top nut
Top nut
Top nut, acorn
Top nut, acorn
park
cad
chrome
park
chrome
B.
"
"
2634-30
R2634-30
R2634-30C
Nut, spring rod
Nut, spring rod
Nut, spring rod
park
cad
chrome
´30-´35
´30-´35
´30-´35
1936
1936
2.00
2.00
2.75
4.00
4.50
✪
✪
✪
✪
✪
Cad upper nuts, chrome top nuts ´30-´35
Cad upper nuts, park top nuts
´30-´35
Cad upper nuts, chrome top nuts 1936
C. R2618-30A
" R2618-30AB
" R2618-30AC
Spring, upper outer (14.5cm)
park
8.00
black
9.00
chrome 14.00
D. R2631-30
Spring rod
park
( includes check spring )
Spring rod
park
( includes check spring )
Bushing, spring rod
park
Bushing, spring rod
cad
Nut, spring rod, bottom end
´30
25.00 ✪
´31-´36
24.00 ✪
´31-´36
´31-´36
19.00 ✪
19.00 ✪
2.00 ✪
R2631-31
E.
"
R2632-31P
R2632-31
2633-30A
C.
10.00 ✪
6.25 ✪
6.50 ✪
Top Nut Sets
C9416-4
C9417-4
C7613-2
"
A.
B.
C7613-2
19.00 ✪
17.50 ✪
20.00 ✪
D.
E.
Rocker Parts
S.
M.
H.
F.
"
G.
H.
"
J.
K.
L.
P. or R.
G.
F.
O.
C7611-2
C7606-26
2641-30
2641-30C
R2642-30
Nut, rocker plate stud
Nut, rocker plate stud
Lockwasher
J.
K.
“
L.
“
M.
R2642-31A
R2643-31
R2643-31cad
R2644-31P
R2644-31
R2645-30
C7611-2
Lockwasher, front park
Nut, rocker stud
park
Nut, rocker stud
cad
Spacer, front stud park
Spacer, front stud cad
Bushing, rocker plate
Bushings installation tool
N.
"
O.
P.
“
R.
“
S.
"
"
"
"
T.
"
"
"
2646-32
Screw, rear stud
park
R2646-32cad Screw, rear stud
cad
2647-32
Lock, rear stud screw park
3732-34
Brace clip lock, left park
R3732-34
Brace clip lock, left park
3732-34A
Brace clip lock, right park
R3732-34A
Brace clip lock, right park
0128
Castle nut, use with long stud
R0128P
R0128
R0128C
R0128NI Castle nut, use with long stud
0129
Nut, short rocker stud
R0129
R0129C
0129NI
´31-´36
´31-´36
´31-´36
´31-´36
´31-´36
10.00
10.00
28.00
10.00
10.00
✪
✪
✪
✪
✪
2.50 ✪
park
1930
chrome 1930
park
1930
2.00 ✪
3.00 ✪
2.25 ✪
T.
K.
M.
2639-31
Rear stud
park
2639-31cad
Rear stud
cad
R2640-31
Front stud, short
cad
2640-31E
Front stud, long
park
2640-31Ecad Front stud, long
cad
( long stud is used with front stand )
R3011-30
Spacer, front stand park
N.
´31-´36
´31-´36
´31-´36
´31-´36
´31-´36
´31-´36
´31-´36
2.25
1.70
1.75
5.00
5.00
10.50
21.00
✪
✪
✪
✪
✪
✪
✪
´32-´36
´32-´36
´32-´36
´34-´36
´34-´36
´34-´36
´34-´36
park
park
cad
chrome
Nickle
park
cad
chrome
Nickle
6.00
6.00
2.50
9.00
5.50
9.00
5.50
2.50
1.60
1.70
1.85
2.00
1.50
1.25
1.35
1.80
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
Rebuild Kits ´32-´36
include studs, bushings, nuts, lockwashers, etc.
Note: these kits include the ´41-up spacers.
R2638-36
Kit with short studs
C7606-26
Kit with short studs (colony)
R2638-36B
Kit with long studs
(long studs are used for fitting front stand)
150.00 ✪
175.00 ✪
100.00 ✪
21
€
prices
in euro
Steering Damper / Footboards
Steering Damper
H.
A.
B.
"
C.
"
D.
E.
F.
G.
R2783-30
R2784-30P
R2784-30
R2785-30P
R2785-30
R2787-30
R2788-30
R2790-30
2791-30
Washer, steering damper
Washer, adjusting
Washer, adjusting
Nut, adjusting
Nut, adjusting
Release spring
Washer, release spring
Washer, fibre friction
Disc, steel
H.
"
"
"
0129
R0129P
R0129
R0129C
Nut, damper rod
Nut, damper rod
Nut, damper rod
Nut, damper rod
bakelite
park
cad
park
cad
2.00
5.00
5.00
6.00
6.00
4.00
1.00
4.00
park
10.00
( ´39-up style )
park
1.50
park
1.15
cad
1.25
chrome
1.35
✪
✪
✪
✪
C.
B.
A.
✪
D.
F.
✪
✪
✪
✪
E.
G.
C2069-5
R2826-30
R3011-30
Kit
cad/park
Screw, rear axle adjusting
cad
Spacer
park
20.00 ✪
10.00 ✪
2.50 ✪
C2069-5
Footboards
C9886-12
Rear Stand Parts
R3060-26
R3061-24P
R3061-24
C8840-10
22
Shoulder bolt, rear stand
park
Spring, rear stand ´30-´35 park
Spring, rear stand ´30-´35 cad
7.00 ✪
1.75 ✪
1.75 ✪
Mounting kit
´30-´35 park
17.00 ✪
(mounting kit includes two bolts with springs and nuts)
R2938-14
R2938-14B
Set of footboards, bare (without mats)
Set of footboards, black (without mats)
R2941-14
Set of footboard mat rivets (28)
C2604-12
Set mounting studs (4)
2945-14
2952-35
Rivet, footboard
Washer, spacing
R2954-14
0108
R0108P
R0256P
C9886-12
Footboard hinge bolt
Nut
Nut
Lockwasher
Hinge bolt kit
R13344-33
R13344-33C
Set extensions
Set extensions
74.00 ✪
91.00 ✪
6.00 ✪
park
41.00 ✪
´35-´36 park
1.00 ✪
2.50 ✪
park
park
park
park
park
´33-´36 park
´33-´36 chrome
2.75
1.50
0.90
0.20
12.75
✪
✪
✪
✪
✪
83.00 ✪
106.00 ✪
prices
in euro
€
3111-12
A. 3111-29
B. 3112-29
“ R3112-29
Solo Seat
Pin, cotter pin type
Pin, seat bar clevis
Spring, pin
Spring, pin
1.50 ✪
7.00 ✪
9.00 ✪
2.50
park
park
A.
B.
C.
D.
C. 3113-29
C2087-1
Bushing, seat post
Seat post bushing installer
7.00 ✪
14.25 ✪
D.
E.
F.
G.
3117-29
3118-29
3119-13
R3107-25
Link, plunger
Rivet, plunger link
Bushing, plunger link
Seat tee pivot bolt
n.a.
n.a.
5.00 ✪
15.00 ✪
R0340
Grease nipple, Alemite
F.
E.
G.
3.00 ✪
Nickle
C2087-1
Solo Seat Mounting
H.
"
J.
"
3187-34
R3187-34
3189-34
R3189-34
Bolt, front
Bolt, front
Washer
Washer
K.
L.
"
"
M.
"
"
"
"
R0225P
R0261P
R0261
R0261C
0129
R0129P
R0129
R0129C
0129NI
Washer
Lockwasher
Lockwasher
Lockwasher
Nut
Nut
Nut
Nut
Nut
´34-´36
´34-´36
´34-´36
´34-´36
park
cad
park
cad
5.00
8.00
4.00
2.50
✪
✪
✪
✪
park
park
zinc
chrome
park
park
cad
chrome
Nickle
0.50
0.20
0.20
0.30
1.50
1.15
1.25
1.35
1.80
✪
✪
✪
✪
✪
✪
✪
✪
✪
N.
“
O.
"
"
"
R.
"
"
S.
"
"
"
3205-34
R3205-34
R3209-31P
R3209-31
R3209-38P
R3209-38
R0259P
R0259
R0259C
R0117P
R0117M
R0117C
R0117NI
Stud
Stud
Spacer 1/4"
Spacer 1/4"
Spacer 1/2"
Spacer 1/2"
Lockwasher
Lockwasher
Lockwasher
Nut
Nut
Nut
Nut
´34-´36
´34-´36
´31-´36
´31-´36
´31-´36
´31-´36
park
park
park
cad
park
cad
park
zinc
chrome
park
cad
chrome
Nickle
5.00
3.25
2.50
2.50
2.00
2.00
0.20
0.20
0.30
0.95
1.00
0.75
1.35
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
N.
H.
O.
J.
S.
R.
J.
K.
L.
M.
Solo Seat Mounting Kit , ´34-´36
Includes front bolt and washers, rear studs with spacers, etc.
C9696-18
Solo seat mounting kit park
C8873-18
Solo seat mounting kit cad
29.50 ✪
30.00 ✪
C8873-18
23
€
prices
in euro
Seat Post
Seat Post Springs and Parts
A. R3128-31
Spring, cushion
5-1/8"
B. 3129-31
Spring, cushion
2-3/4"
C. R3129-31C
Spring, extra heavy
3-3/16"
" R3129-31A
Spring, extra heavy, with collars
D. R3133-30
Spring, recoil
1"
E. R3135-30
Spring, auxiliary
2-15/16"
F. R186-10
Spring, auxiliary
2-7/16"
Note: Auxiliary springs fit in plunger above rod.
G. R3138-31
" R3138-29A
Collar guide,standard springs
Collar guide,heavy springs
H.
"
J.
K.
R3137-30
R3137-30S
3141-29
3143-25
Rod, 15¾"/ 40 cm
standard length
Rod, 16¾"/ 42,5 cm extra long
Nut, plunger lock
Nut, seat post rod
L.
M.
N.
O.
"
3144-25
R0269P
3147-29A
0129
R0129P
Nut, rod lock
Lockwasher
Nut, spring adjusting
Nut, lock
Nut, lock
park
park
park
park
12.00
5.00 ✪
11.00
18.00
3.50
4.00
5.00
E.
D.
F.
J.
4.50 ✪
4.50 ✪
18.00
19.00
18.00
3.50
✪
✪
✪
✪
5.00
0.85
3.50
1.50
1.15
✪
✪
✪
✪
✪
H.
A.
G.
B. or C.
G.
N.
O.
O.
K.
A.
M.
L.
Seat Post Spring Sets
Seat post spring sets are available standard or extra
heavy, depending on weight of rider, see chart.
If lighter spring set is needed, order springs
seperately. Each set also includes two spring
guides, except set 3128-29, which includes only
one (as original).
24
Standard spring sets
3128-29
Lower springs only (3)
R3128-31A Complete set
(6)
32.00 ✪
37.00
Extra heavy spring sets
R3128-29A Lower springs only (3)
R3128-31B Complete set
(6)
33.00
45.00
prices
in euro
€
Handlebar Parts
Handlebar Spirals and Parts
R3310-09
R3310-35B
R3310-35W
K.
Pair of handlebar grips black
Pair of handlebar grips black
Pair of handlebar grips white
´16-´34
´35-´48
´35-´48
n.a.
8.00
9.00
E.
F.
D.
G.
A. R3312-16
" R3312-16C
" R3312-16NI
Spiral
Spiral
Spiral
bare
´30-´34
chrome ´30-´34
Nickle ´30-´34
31.00
40.00
40.00
"
"
"
"
R3312-35
R3312-35C
R3312-35A
R3312-35AC
Spiral
Spiral
Spiral, left throttle
Spiral, left throttle
bare
´35-´36
chrome ´35-´36
bare
´35-´36
chrome ´35-´36
31.00
40.00
31.00
40.00
B.
"
R3314-35C
R3314-16NI
Replacement sleeve chrome ´30-´36
Replacement sleeve Nickle ´30-´36
15.00
15.00
C.
D.
E.
F.
G.
H.
R3316-31
305-15
R3320-10
R3321-31
R3322-31
R3324-09
C8923-8
Handlebar plunger
Plunger pin
Roller, plain
Roller, block
Screw, wire fastening
Control wire end
Handlebar roller & pin kit
´31-´36
16.00
1.50
2.00
2.50
2.50
1.00
18.00
J.
R3330-36
Nut, handlebar end park
"
R3330-31
Nut, handlebar end park
K.
R3333-31
Screw, control coil plug
7.00 ✪
(57/64"-24)
´31-´36
7.50 ✪
(13/16"-24)
´31-´36
1.00 ✪
A.
C.
H.
´31-´36
´31-´36
´31-´36
B.
J.
✪
✪
✪
✪
✪
✪
✪
´30
C8923-8
Handlebar Control Cables
L.
"
"
"
M.
"
N.
"
R3334-12
R4143-12
R3334-32
R3334-39
Control cable
Control cable
Control cable
Control cable
R3326-09
R3324-09
Wire, control
150cm
Nipple, control wire end
R3341-28
R3341-29
0129
R0129P
Adjusting sleeve
Adjusting sleeve, lower
Nut, adjusting sleeve
Nut, adjusting sleeve
O. R3370-29
130 cm
215 cm
130 cm
130 cm
Connection, carburetor
Nickle
Nickle
pvc
cotton
34.00 ✪
55.00 ✪
22.00 ✪
n.a.
L.
4.50 ✪
1.00 ✪
park
park
park
park
park
6.00
11.00
1.50
1.15
✪
✪
✪
✪
10.00 ✪
N.
O.
M.
25
€
prices
in euro
Petrol & Oil Tank
R2210-16C
R2210-16NI
Nut, shifter guide clamp
Nut, shifter guide clamp
R3507-16
R3507-35
Tank cap
Tank cap
chrome
Nickle
chrome ´30-´34
chrome ´35-´36
14.00 ✪
13.00 ✪
n.a.
n.a.
B3507-16
B3507-35
Tank Mounting Screws
A.
"
B.
"
"
R3529-10P
R3529-10
0108
R0108P
R0108NI
R3530-25
C2463-8
Screw, tank clip
Screw, tank clip
Nut, tank screw
Nut, tank screw
Nut, tank screw
Spacer, tank clip screw
Set screws with spacers
park
Nickle
park
park
Nickle
5.00
5.00
1.50
0.90
1.25
5.00
21.50
✪
✪
✪
✪
✪
✪
✪
Tank Top Screws
C.
"
"
"
"
R3532-18P
3532-18
R3532-18
R3532-18C
R3532-18NI
Screw
Screw
Screw
Screw
Screw
7/32"-32
7/32"-32
7/32"-32
7/32"-32
7/32"-32
park
cad
cad
chrome
Nickle
3.50
5.00
3.50
4.00
3.50
✪
✪
✪
✪
✪
"
“
"
"
"
3532-18S
R3532-18SP
R3532-18S
R3532-18SC
R3532-18SNI
Screw, oversize
Screw, oversize
Screw, oversize
Screw, oversize
Screw, oversize
1/4"-32
1/4"-28
1/4"-28
1/4"-28
1/4"-28
park
park
cad
chrome
Nickle
4.00
3.50
3.50
3.50
3.50
✪
✪
✪
✪
✪
E.
"
"
"
“
"
"
"
R3533-18P
R3533-18
R3533-18C
R3533-18NI
R3533-18SP
R3533-18S
R3533-18SC
R3533-18SNI
Washer
Washer
Washer
Washer
Washer, oversize screw
park
cad
chrome
Nickle
park
cad
chrome
Nickle
1.60
1.60
2.25
1.60
1.60
1.60
2.25
1.60
✪
✪
✪
✪
✪
✪
✪
✪
F.
"
3534-34
R3534-34
Paper washer
Paper washer
26
´34-´36
´34-´36
1.50 ✪
0.40 ✪
C8822-18
C8821-18
C2814-18
C8822-18os
C8821-18os
C2817-18
Set of 6
7/32"-32
Set of 6
7/32"-32
Set of 6
7/32"-32
Setof 6 oversize1/4"-28
Set of 6 oversize1/4"-28
Set of 6 oversize1/4"-28
tap160-001
M1423T
tap160-003
Tap, standard screw
Tap, oversize screw
Tap, oversize screw
cad
Nickle
park
cad
Nickle
park
7/32"-32
1/4"-28
1/4"-32
29.00
29.50
28.25
29.00
29.50
28.25
✪
✪
✪
✪
✪
✪
n.a. ✪
4.50 ✪
10.00 ✪
prices
in euro
€
Petrol & Oil Tank / Tool Box
´08-´32
1933
R5917-08S
R5922-33S
R5923-33S
Set of tank decals
´08-´32
Set of tank decals, white center 1933
Set of tank decals, black center 1933
R5917-34+AS Set of tank decals
R5917-36+AS Set of tank decals
R5919-08S
R5920-08S
Decal
Decal
´34-´35
´36-´39
“patented”
“trademark”
15.00
17.00
17.00
18.00
15.00
5.00
5.00
´34-´35
´36-´39
Tool Box Parts
8.00 ✪
3464-26
Tool box key
R3475-31A
R3477-31
R0136P
Bolt, bracket
park
Spacer, bracket bolt park
Nut, bracket bolt
park
´31-´34
´31-´34
´31-´34
10.00 ✪
5.75 ✪
1.30 ✪
R3805-30AP
R3805-30A
R3478-35P
R3478-35
Screw, tool box
Screw, tool box
Washer, screw
Washer, screw
park
cad
park
cad
´35-´36
´35-´36
´35-´36
´35-´36
4.00
4.00
2.00
2.00
C2456-10
Mounting kit
park
´31-´34
37.50 ✪
✪
✪
✪
✪
27
€
prices
in euro
Oil & Petrol Lines
Lines and Parts
R3571-30
R3571-34
R3572-30
Oil line, mechanical feed ´30-´33 cad
Oil line, mechanical feed ´34-´36 cad
Oil line, hand pump
´30-´36 cad
27.50 ✪
27.50 ✪
27.00 ✪
R3606-32
Petrol line (use with petrol filter)´32-´36
35.00 ✪
R3577-15P
R3577-15
R3577-15C
R3581-15
Nipple, oil line
Nipple, oil line
Nipple, oil line
Flare nut, oil line
park
cad
chrome
cad
4.00
4.00
5.00
3.50
G. R0140
H. R3615-15
Nut
Nipple
cad
cad
2.25 ✪
4.00 ✪
J.
K.
R3612-09
R3617-15
Nut, carburetor end
Nipple, carburetor end
(models without filter)
´30-´31
´30-´31
4.00 ✪
4.00 ✪
L.
R3585-15
Petrol line tee only
cad
11.50 ✪
(use for repairs or to make lines yourself )
E.
"
"
F.
✪
✪
✪
✪
F.
E.
H.
G.
J.
M. R3583-15
Cap, oil tank nipple
cad
1.75 ✪
Use on oil tank and oil pump when lines are disconnected, to prevent
leakage or contamination during storage.
M.
M1902
tap
1/8-27NPT
8.00
For rethreading threads for oil line nipple 3577-15 and for petrol
valves 3601-16 in tank.
Petrol Filter, ´32-´36
C9659-1
Petrol filter Nickle with brass cap
75.00 ✪
Complete filter includes screen, corks, and diamond style brass cap.
R3627-32
3629-31
C9730-3
3633-32
R3612-09
R3617-15
28
Screen, with corks
Cap, diamond knurl style
Cap, diamond knurl style
Washer, cork
Nut only
Nipple only, for repairs
genuine
brass
cad
cad
16.00
24.00
15.00
0.80
4.00
4.00
✪
✪
✪
✪
✪
✪
L.
K.
prices
in euro
€
Fender
Front Fender
R0308
Rivet
3/16" x 9/16" round head
(braces to clips)
3/16" x 3/8" truss head
(fenders to braces)
0314
Rivet
R3749-30P
R3749-30
R3749-30C
R0259P
R0259
R0259C
R0117P
R0117M
R0117C
R0117NI
Screw, fender to fork
Lockwasher
Lockwasher
Lockwasher
Nut
Nut
Nut
Nut
3732-34
R3732-34
3732-34A
R3732-34A
Brace lock, left
Brace lock, left
Brace lock, right
Brace lock, right
0.35 ✪
"round head"
"truss head"
1.00 ✪
C8009-2
´34-´36
´34-´36
´34-´36
´34-´36
park
cad
chrome
park
zinc
chrome
park
cad
chrome
Nickle
3.00
3.00
3.50
0.20
0.20
0.30
0.95
1.00
0.75
1.35
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
park
park
park
park
9.00
5.50
9.00
5.50
✪
✪
✪
✪
18.00
18.00
21.00
11.00
✪
✪
✪
✪
C8203-6
Front fender mounting kits
includes fender to fork screws and lower brace locks and nuts
C9680-6
C8203-6
C9742-6
C8009-2
Mounting kit
Mounting kit
Mounting kit
Locks only
´34-´36
´34-´36
´34-´36
´34-´36
parkerized
cad plated
chrome plated
parkerized
R3757-26
Mudflap
rubber
black
Reinforced rubber as original. Includes parkerized hardware.
R033P
R033
R033C
R0205P
R0254P
R0254
R0254C
R0104P
R0104Z
R0104C
Screw, mudflap
Screw, mudflap
Screw, mudflap
Washer
Lockwasher
Lockwasher
Lockwasher
Nut
Nut
Nut
park
cad
chrome
park
park
zinc
chrome
park
zinc
chrome
16.00 ✪
0.50
0.55
0.70
0.30
0.20
0.20
0.30
0.40
0.40
0.50
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
C9786-11
Fender lamp wire kit
´34-´36
26.00 ✪
Steel tube, clamps, nuts, connectors, wire and loom will secure wire to
fender as original.
Rear Fender
3741-34
Rear fender end brace bracket
R0308
Rivet
0314
R3743-23
R0117P
R0117M
R0117C
R0117NI
R0214P
R0214
R0214C
R0259P
R0259
R0259C
C2460-2
´34-´36
3/16" x 9/16" round head
(braces to clips)
Rivet 3/16" x 3/8" truss head
(fenders to braces)
Bolt, rear end with nut
park
Nut only
park
Nut only
cad
Nut only
chrome
Nut only
Nickle
Washer
park
Washer
cad
Washer
chrome
Lockwasher
park
Lockwasher
zinc
Lockwasher
chrome
Bolt kit (2)
park
17.00 ✪
0.35 ✪
1.00 ✪
6.00
0.95
1.00
0.75
1.35
0.40
0.40
0.40
0.20
0.20
0.30
12.00
"round head"
"truss head"
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
29
€
prices
in euro
Chainguard / Axle
A. R3805-30AP
" R3805-30A
Screw, front chain guard back
Screw, front chain guard back
park
cad
4.00 ✪
4.00 ✪
B.
Lock, front chain guard screw
park
Washer, plug
´32-´36
3.75 ✪
1.00 ✪
C. R3811-29
" R3811-29C
Cover, chain inspection
Cover, chain inspection
black
chrome
?
6.50
D. R048AP
" R048A
" R048AC
Screw, inspection cover
park
cad
chrome
0.75 ✪
0.80 ✪
1.00 ✪
Screw, chain guard/gear box ´30-´35
1.00 ✪
R3805-30B
3805-32D
C.
R3813-30
Rear Axle Parts
B.
D.
A.
Rear Axle Nut Kits
Include nuts, collar and lockwasher.
F.
"
R3957-30P
R3957-30C
R0340
Nut, rear axle, with nipple
Nut, rear axle, with nipple
Grease nipple, Alemite
park
chrome
Nickle
11.50 ✪
12.50 ✪
3.00 ✪
G.
"
"
"
3958-32
R3958-32P
R3958-32
R3958-32C
Lockwasher
Lockwasher
Lockwasher
Lockwasher
park
park
cad
chrome
8.00
5.50
5.50
6.00
Axle nut kit
Axle nut kit
5.00 ✪
5.00 ✪
7.00 ✪
Collar, sleeve
Collar, sleeve
Collar, sleeve
park
cad
chrome
J.
"
"
"
Nut, axle sleeve
Nut, axle sleeve
Nut, axle sleeve
Nut, axle sleeve
park
park
cad
chrome
12.50
11.00
11.00
12.50
cad/park
cad
park
20.00 ✪
10.00 ✪
2.50 ✪
✪
✪
✪
✪
J.
F.
G.
C9611-5
C2069-5
R2826-30
R3011-30
Kit, two screws and spacer
Screw, rear axle adjusting
Spacer only
C2069-5
Front Axle Parts
R4178-30P
R4178-30C
Nut, front axle
Nut, front axle
park
chrome
8.00 ✪
9.00 ✪
R4184-30P
R4184-30
R4184-30C
Nut, axle sleeve
Nut, axle sleeve
Nut, axle sleeve
park
cad
chrome
6.00 ✪
6.50 ✪
8.00 ✪
C9406-3
C9405-3
Kit, axle and sleeve nut
Kit, axle and sleeve nut
park
chrome
17.50 ✪
24.00 ✪
C9406-3
30
park
chrome
✪
✪
✪
✪
H. R3961-30P
" R3961-30
" R3961-30C
3963-30
R3963-30P
R3963-30
R3963-30C
C9611-5
C9610-5
H.
24.50 ✪
33.00 ✪
prices
in euro
€
Rear Brake
Rear Brake Parts
´31-´36
2.25 ✪
´35-´36
5.00
A. R4055-31
Spring washer
B.
R4059-35
Pivot stud plate
zinc
C. R2634-30AP
" R2634-30A
" R2634-30AC
Nut, pivot stud
Nut, pivot stud
Nut, pivot stud
park
´35-´36
cad
´35-´36
chrome ´35-´36
A.
C.
2.00 ✪
2.00 ✪
2.75 ✪
B.
Rear Brake Control Parts
D. R4063-30
E. R4065-30
R0117P
R0117
R0117C
R0117NI
F.
"
"
Brake rod, front
Brake rod, rear
Nut, brake rod
Nut, brake rod
Nut, brake rod
Nut, brake rod
park
park
park
cad
chrome
Nickle
18.00
19.00
0.95
0.40
0.75
1.35
✪
✪
✪
✪
✪
✪
H.
R4067-30
Clevis, long
park
´35-´52
13.50 ✪
R4067-30C
Clevis, long
chrome ´35-´52
18.00 ✪
Above “long” clevises are exact replacement parts
R4067-51C
Clevis, short (10 cm) chrome ´35-´52
12.00
G. R2422-30A
" B2422-30AC
Clevis, front rod
Clevis, front rod
park
chrome
14.00 ✪
6.00 ✪
H. 2423-30
0207
R0212P
R0212C
R0290P
R0290
Clevis pin
Washer, clevis pin
Washer, brake rod
Washer, brake rod
Cotter pin
Cotter pin
park
park
chrome
park
zinc
1.00
1.00
0.40
0.45
0.15
0.15
K.
"
"
Spring, brake lever
Spring, brake lever
Spring, brake lever
black
park
chrome
6.00 ✪
6.00 ✪
7.50 ✪
Cross-over shaft
Bushing
Bushing installing tool
Lockwasher park
Nut
Nut
´31-´36
´31-´36
R2964-26
R2964-26P
R2964-26C
L. R4075-31
M. R4075-31A
C2712-1
O. R4078-30
P. R4079-26P
R4079-26
late´30-´36
park
cad
33.00
7.50
10.50
3.50
4.75
4.75
F.
G.
H.
E.
D.
✪
✪
✪
✪
✪
✪
K.
G.
H.
M.
✪
✪
✪
✪
✪
P.
M.
O.
L.
P.
C9677-4
C7820-4
C8409-4
Nut and washer kit
Nut and washer kit
Nut and washer kit
park
cad
chrome
O.
15.50 ✪
16.00 ✪
17.50 ✪
31
€
prices
in euro
Front Brake
Front Brake Parts
4112-40
Set brake shoes with linings ´31-´36
n.a.
F.
B. 4118-35
C. 4119-35
" R4119-35
Pivot stud, front brake
Plate, pivot stud
Plate, pivot stud
´35-´36
park
zinc
15.00 ✪
7.00 ✪
5.00
D.
"
"
E.
"
"
"
Lockwasher
Lockwasher
Lockwasher
Nut, pivot stud
Nut, pivot stud
Nut, pivot stud
Nut, pivot stud
park
zinc
chrome
park
cad
chrome
Nickle
0.20
0.20
0.30
1.20
1.30
0.85
1.60
Stud, brake operating
Washer, operating stud
Spring, front brake shoe
´31-´36
n.a.
1.80
3.00
R0261P
R0261
R0261C
R0127P
R0127
R0127C
R0127NI
F. 4124-31
G. R4055-35
H. R4125-28A
G.
C.
✪
✪
✪
✪
✪
✪
✪
D.
E.
B.
H.
Brake Shackle Parts
J.
K.
L.
"
"
"
4131-28
R4133-31
R0128P
R0128
R0128C
R0128NI
Bushing, brake shackle
Stud, brake shackle
Castle nut
park
Castle nut
cad
Castle nut
chrome
Castle nut
Nickle
M.
O.
"
"
P.
"
"
R.
"
"
"
"
4137-30
R0223P
R0223
R0223C
R0261P
R0261
R0261C
0129
R0129P
R0129
R0129C
0129NI
Stud, shackle band
Washer
Washer
Washer
Lockwasher
Lockwasher
Lockwasher
Nut
Nut
Nut
Nut
Nut
C2298-10
Rebuild kit
park
cad
chrome
park
zinc
chrome
park
park
cad
chrome
Nickle
7.00
30.50
1.60
1.70
1.85
2.00
✪
✪
✪
✪
✪
✪
8.00
0.90
0.90
1.20
0.20
0.20
0.30
1.50
1.15
1.25
1.35
1.80
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
R.
P.
O.
J.
L.
M.
K.
J.
C2298-10
77.50 ✪
Brake Cables
26.00 ✪
12.00 ✪
R4142-30
4143-30B
Brake coil coupling (oiler)
Short coil, to oiler (cotton)
R3334-12
R4143-30
R4143-39
Outer cable, Nickle
130 cm
Outer cable, plastic covered 130 cm
Outer cable, cotton braided 130 cm
R4144-30P
R4144-30
R4144-30AP
Ferrule, cotton braided cables
Ferrule, cotton braided cables
End nut
4145-28
R4145-28
Wire, control (inner cable)
Wire, control (inner cable)
32
cad
park
cad
park
150 cm
160 cm
34.00 ✪
20.00 ✪
n.a.
4.00 ✪
4.00 ✪
6.00 ✪
12.50 ✪
7.50 ✪
R4142-30
prices
in euro
€
Front Brake
Front Brake Control Parts
C.
A. 4154-28
Screw, bracket clamp
park
3.00
B. R032P
park
0.50
" R032
cad
0.55
" R032C
chrome
0.65
Note: Use one 4154-28 special screw and one 032 standard screw.
park
✪
✪
✪
✪
Screw, hand lever
Spring washer, screw
E.
"
4160-28
R4160-28
F.
R4162-30
Clamp, coil to handlebar
black
15.00 ✪
Clamp, coil to handlebar
park
7.50 ✪
(includes parkerized screw and nut)
Clamp, coil to shackle stud park
5.00 ✪
053
R053P
R053C
R053NI
R0256P
R0256
R0256C
0108
R0108P
R0108M
R0108C
R0108NI
Screw
Screw
Screw
Screw
Lockwasher
Lockwasher
Lockwasher
Nut
Nut
Nut
Nut
Nut
3.00
1.25
1.80
3.00
0.20
0.20
0.30
1.50
0.90
0.95
0.70
1.25
K.
L.
M.
P.
O.
B.
D.
10.00 ✪
4.00 ✪
C. 4156-28
D. 4157-28
park
park
chrome
Nickle
park
zinc
chrome
park
park
cad
chrome
Nickle
A.
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
F.
E.
K.
"
"
R4165-28P
R4165-28
R4165-28C
Adjusting screw
Adjusting screw
Adjusting screw
park
cad
chrome
8.00 ✪
12.00 ✪
12.50 ✪
L.
"
"
R4166-28P
R4166-28
R4166-28C
Nut
Nut
Nut
park
cad
chrome
1.40 ✪
1.50 ✪
2.00 ✪
M. 4170-28
O. 4171-29
Connection, with nut
Nut only
park
park
14.00 ✪
3.00 ✪
P.
R.
Pin
Washer
Cotter pin
Cotter pin
park
park
zinc
2.00 ✪
1.00 ✪
0.15
0.15
4069-26
0207
R0290P
R0290
R.
33
€
prices
in euro
Electrical
Battery Box Parts
R4409-26C
R4409-26
Wing nut, battery cover
Wing nut, battery cover
chrome
zinc
4433-23
4434-23
4433-23A
4435-23
Screw, terminal
Nut, terminal screw
Felt, terminal
Set screws with felts
cad
cad
cad
R066P
R066Z
R066C
069
Bolt, front mounting
Bolt, rear upper mounting
R061P
R061
R061C
R0117P
R0117M
R0117C
R0117NI
Bolt, rear lower mounting
Nut, mounting bolts
Nut, mounting bolts
Nut, mounting bolts
Nut, mounting bolts
4.50 ✪
0.50 ✪
3.00
1.70
1.00
10.00
✪
✪
✪
✪
park
zinc
chrome
park
1.75
0.50
1.30
1.50
✪
✪
✪
✪
park
cad
chrome
park
cad
chrome
Nickle
1.30
1.35
1.40
0.95
1.00
0.75
1.35
✪
✪
✪
✪
✪
✪
✪
4435-23
Wiring Kit
Includes all low tension wiring, loom and original type terminals.
R4735-30
R4732-34
Complete wiring kit
Sidecar taillight wiring kit
´30-´36
´34-´36
95.00 ✪
20.00 ✪
Wire
fabric as used on ´69 and earlier models
R4712-15A
black / white tracer
R4712-15B
green / white tracer
R4712-15C
yellow / black tracer
R4712-15D
red / white tracer
R4712-15E
green
R4712-15F
red
R4712-15G
black / red tracer
R4712-15H
gray / black tracer
R4712-15K
red / black tracer
R4712-15M
blue / white tracer
R4712-15P
red / yellow tracer
R4712-15R
black
R4712-15S
white / blue tracer
R4712-15T
light blue / black tracer
R4712-15U
yellow
R4735-30
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
R4521-26 Key, switch
Wire loom
fabric as used on ´69 and earlier models
R4711-45A
I.D. 3/16"
4,7 mm
R4711-45B
I.D. 1/4"
6,3 mm
R4711-45C
I.D. 5/16"
7,9 mm
R4711-45D
I.D. 3/8"
9,5 mm
R4711-45E
I.D. 1/2" 12,7 mm
R4711-45F
I.D. 5/8" 15,8 mm
1 meter
1 meter
1 meter
1 meter
1 meter
1 meter
3.50
3.50
3.50
3.50
3.50
3.50
✪
✪
✪
✪
✪
✪
Terminals
“Early style” terminals:
R4715-18
Terminal, round solder type ´18-´37
1614-18
Terminal and eyelet
´18-´47
0.75 ✪
3.00 ✪
“Modern style” terminals:
R1520-40
Flag terminal
R1520-41
Ring terminal
R1520-42
Ring terminal
0.50 ✪
0.25 ✪
0.25 ✪
34
14-16 gauge, #10 eye
14-16 gauge, # 6 eye
14-16 gauge, #10 eye
4.50 ✪
prices
in euro
€
Switches / Horn
Horn Switch
B.
B.
C.
D.
F.
4762-26
4764-26
4766-26
4776-26
R018P
R018
R018C
Button
Spring
Insulation
Washer, horn spring
Screw
Screw
Screw
park
cad
chrome
5.00
2.00
3.00
8.00
0.45
0.50
0.60
Switch
chrome
Switch
green
Lever
Housing
chrome
Housing
green
Pin, contact (2 position)
Pin, contact (3 position)
Spring, pin
Block
Screw
park
Screw
cad
Screw
chrome
n.a.
?
6.00
n.a.
14.00
3.00
4.00
2.50
n.a.
0.45
0.50
0.60
✪
✪
✪
✪
✪
✪
✪
F.
C.
D.
Headlight Dimmer Switch
H.
"
J.
L.
"
M.
"
N.
O.
4760-29C
4760-29N
4764-29
4768-29C
4768-29N
4770-29
4770-38A
4771-29
4776-29
R018P
R018
R018C
H.
✪
✪
✪
✪
✪
✪
✪
✪
✪
N.
M.
O.
J.
L.
H.
Wire Clamps
R1602-30
R4728-25
C2492-1
R4727-30
R4730-30A
Clamp
Clamp
Clamp (4727-23)
Clamp
Clamp
park
park
park
park
park
11.50
12.00
12.00
12.00
12.00
✪
✪
✪
✪
✪
R4728-25
R4730-30A
Relay
Electronic, use with 32E three-brush generator. (V-Tronic)
R4785-26
Relay, without cover
R4786-26DR Cover
R4786-26DRC Cover
black
chrome
´30-´36
38.00
´30-´36
´30-´36
14.50
17.00
Horn Mounting Parts
W.
V. R4861-29
W. R4862-29
X. R4862-31
Spring plate, horn bracket
Spring plate, straight
Spring plate, curved
Y.
R4884-26
Z.
R4884-31
Screw, round head, short
cad
(front cover)
Screw, round head, long
cad
(plate mounting)
Fibre, terminal screw
´31-´36
4829-31
´31-´36
6.00 ✪
5.00 ✪
6.00 ✪
5.00 ✪
Z.
V.
Y.
X.
3.50 ✪
1.00 ✪
R4863-31KIT Horn mounting kit
´31-´36
55.00 ✪
Kit includes all plates, screws and nuts to mount horn to left and right brackets.
B4863-31KIT
35
€
prices
in euro
Headlight / Taillight
´35-´36 Headlamp and Parts
A. R4901-35
" R4901-35C
R4904-35B
R4904-35C
Headlamp, black/ chrome ring 6 Volt
Headlamp, chrome
6 Volt
Housing, headlamp
black
Housing, headlamp
chrome
65.00
70.00
B.
Headlamp lens
15.00
R4906-35
C. 4914-35N
" R4914-35C
4915-35
D. R4918-35P
" R4918-35
" R4918-35C
E. R4922-35kit
"Cycleray"
Door (bezel)
green
Door (bezel)
chrome
Lug, door
Screw, door fastening park
Screw, door fastening cad
Screw, door fastening chrome
Reflector, with socket and wiring
20.00
19.00
1.00
0.85
0.85
1.50
22.00
A.
L.
M.
✪
O.
✪
✪
✪
✪
F. R4925-35
Bulb, headlamp
6 Volt 35/35W
5.00
" R4925-54
Bulb, headlamp
6 Volt 50/50W
5.00
(higher than standard wattage, must be used with 2-brush generator
to prevent drainage of the battery)
" R4925-3512V Bulb, headlamp
12 Volt
7.00
C.
B.
K. J.
H.
E.
D.
F.
H. 4938-35
I. 4940-35
K. 4941-35
R0352
R0356
Block, terminal, incl. 2 screws
Screw, terminal
8-32
Screw, terminal
10-32
Lockwasher
zinc
Lockwasher
zinc
L. 4905-29
M. R4971-38AP
" R4971-38A
Bolt, headlamp fastening
Washer, head lamp
Washer, head lamp
park
cad
O.
"
"
"
"
0134
R0134P
R0134
R0134C
R0134NI
R0265P
R0265
R0265C
Nut, headlamp fastening
Lockwasher
Lockwasher
Lockwasher
park
park
cad
chrome
Nickle
park
zinc
chrome
2.00
1.35
1.45
2.50
2.50
0.55
0.60
0.75
✪
✪
✪
✪
✪
✪
✪
✪
R3475-31A
R3475-31
R3477-31
R0136P
Bolt, lamp bracket
Bolt, lamp bracket
Spacer, bracket bolt
Nut, bracket bolt
´31-´34
´35-´36
´31-´34
´31-´36
10.00
10.00
5.75
1.30
✪
✪
✪
✪
Headlamp Bracket Mounting Kits
C2456-10
Mounting kit
C2457-8
Mounting kit
C2458-8
Mounting kit
park
park
park
park
park
´31-´34
park
´35-´36
chrome ´35-´36
?
1.00
1.00
0.20
0.20
✪
✪
✪
✪
10.00 ✪
3.65 ✪
3.65 ✪
C8943-27
Headlamp restoration kit
26.00 ✪
All parts to restore and mount headlamp, includes special bolts to
replace rivets.
R4947-35
Special bolt only, with nut
cad
3.50 ✪
37.50 ✪
19.50 ✪
25.00 ✪
Taillight Lenses
36
R5054-20
R5054-34
R5065-25
Red lens
Red lens
White lens
´20-´33 models
´34-´38 models
´25-´38 models
R5058-34
R5058-47
Bulb
Bulb
´34-´36 tail/stoplight
(´47-up fitting)
6 Volt
6 Volt
26.00 ✪
26.00 ✪
26.00 ✪
6.00 ✪
2.00
prices
in euro
€
Accessories
R11350-34BL
R11350-41M
Mirror, short model
black
Mirror with extension black
27.00 ✪
33.00 ✪
R11350-41MA
R11350-41MH
Extension only
Replacement mirror head only
11.00 ✪
13.00 ✪
R11350-42C
Mirror, with clamp
10.00
chrome
R11787-XC
Set of saddlebag plates
chrome
to mount saddlebags directly to fender, 4 hole style
34.00 ✪
C8205-8
27.00 ✪
Mounting kit, 8 studs with acorn nuts
R13402-47 Front fender lamp gasket foam
R13402-35 Lens gasket
foam
´35-´48
´35-´48
n.a.
n.a.
C9786-11 Front fender lamp wire kit
26.00 ✪
Steel tube, clamps, nuts, connectors, wire and loom will secure wire to
fender as original on ´35-´47 models.
4724-15
Small tubing clamp only
10.00 ✪
Jiffy stand parts
R13202-30
R13205-30
R13205-30os
Spring, jiffy leg
Bushing, jiffy leg
Bushing, jiffy leg
5.50
10.00
10.00
1723-30
0109
0109C
U-bolt, with nuts
Nut
Nut
park
park
chrome
9.75 ✪
2.00 ✪
2.30 ✪
R0229P
R0133P
R0133
R0133C
Washer
Nut
Nut
Nut
park
park
cad
chrome
0.50
1.30
1.35
1.50
´33-´52
11.00
oversize
✪
✪
✪
✪
Buddy Seat Parts
R13304-33
Set of front clamps
13314-33
13316-33
R4409-26
Bolt, clip 1-3/8"
Bolt, clip 7/8"
Wing nut, clip bolt
park
park
zinc
´33-´36
´33-´36
´33-´36
6.00 ✪
6.00 ✪
0.50 ✪
13322-33N
R13322-33C
2641-30
2641-30C
Spring, auxiliary
Spring, auxiliary
Nut, spring
Nut, spring
green ´33-´36
chrome ´33-´36
park
´33-´36
chrome ´33-´36
20.00 ✪
13331-33N
13340-33
069
Bracket, aux. springs
Yoke hook, springs park
Bolt, aux. spring bolt park
´33-´36
´33-´36
´33-´36
2.00 ✪
3.00 ✪
n.a.
n.a.
1.50 ✪
37
€
prices
in euro
Ride Control / Bearings
Ride Control Parts ´33-´36
A.
"
"
B.
R13430-33P
R13430-33
R13430-33C
R13431-33
4.00
3.00
7.00
5.00
✪
✪
✪
✪
Friction disc cup
Friction disc cup
Friction disc cup
Friction disc
park
zinc
chrome
C. 13437-33
" R13437-33
Spring washer
Spring washer
park
park
14.00 ✪
7.00 ✪
D.
"
E.
"
R13440-33
R13440-33C
13442-33
R13442-33
Adjusting wheel
Adjusting wheel
Spring clip
Spring clip
bare
chrome
park
park
13.00
23.00
15.00
9.00
✪
✪
✪
✪
F.
"
"
"
13444-33
R13444-33P
R13444-33
R13444-33C
Wheel collar
Wheel collar
Wheel collar
Wheel collar
park
park
cad
chrome
13.00
5.00
4.50
6.00
✪
✪
✪
✪
G. R13454-33
R0231P
Rubber
Washer, plate stud
park
3.00 ✪
1.00 ✪
0129
R0129P
R0129
R0129C
0129NI
Nut, side plate stud
park
park
cad
chrome
Nickle
1.50
1.15
1.25
1.35
1.80
✪
✪
✪
✪
✪
F.
D.
E.
A.
B.
B.
A.
C.
G.
Roller Bearing Roller Guide
Forked end connecting rod
Front brake hub
Sidecar brake hub, except LE
R304-15
Roller, standard
R304-15D
Roller, oversize
R304-15F
Roller, oversize
304-15H
Roller, oversize
304-15KA
Roller, oversize
304-15MA
Roller, oversize
(24)
´30-´36
(24)
´30-´36
(28)
´30-´36
0.2498" x .360"
+.0002"
+.0004"
+.0006"
+.0008"
+.0010"
0.60
0.60
0.60
1.00
1.00
1.00
✪
✪
✪
✪
✪
✪
Single end connecting rod
Clutch sprocket
R305-15
Roller, standard
305-15D
Roller, oversize
305-15F
Roller, oversize
305-15H
Roller, oversize
305-15KA
Roller, oversize
R305-15MA
Roller, oversize
R305-15MA2 Roller, oversize
(12)
´30-´36
(12)
´30-´36
0.2498" x .726"
+.0002"
+.0004"
+.0006"
+.0008"
+.0010"
+.0020"
0.60
1.50
1.50
1.50
1.50
0.60
0.60
✪
✪
✪
✪
✪
✪
✪
Countershaft gear, standard transmission
(24)
´30-´31
R2289-17
Roller, standard
0.2498" x .270"
R2289-17D
Roller, oversize
+.0002"
R2289-17F
Roller, oversize
+.0004"
2289-17H
Roller, oversize
+.0006"
2289-17KA
Roller, oversize
+.0008"
2289-17MA
Roller, oversize
+.0010"
0.50
0.50
0.50
1.00
1.00
1.00
✪
✪
✪
✪
✪
✪
38
Left crankcase
Main drive gear
Interchangeable wheel hub
Countershaft gear, right side
R2289-25
Roller, standard
R9219
Roller, oversize
R2289-25D
Roller, oversize
R9218
Roller, oversize
R2289-25F
Roller, oversize
R9217
Roller, oversize
R2289-25H
Roller, oversize
R2289-25KA Roller, oversize
R2289-25MA Roller, oversize
R2289-25MA2 Roller, oversize
(24)
´30-´36
(20)
´30-´36
(28)
´30-´36
(12)
´32-´36
0.2498" x .490"
+.0001"
+.0002"
+.0003"
+.0004"
+.0005"
+.0006"
+.0008"
+.0010"
+.0020"
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
✪
✪
✪
✪
✪
✪
✪
✪
✪
✪
Countershaft gear, left side
R2306-32
Roller, standard
R2306-32F
Roller, oversize
2306-32H
Roller, oversize
2306-32KA
Roller, oversize
2306-32MA
Roller, oversize
(21)
´32-´36
0.152" x .625"
+.0004"
+.0006"
+.0008"
+.0010"
0.50
0.50
0.60
0.60
0.70
✪
✪
✪
✪
✪
prices
in euro
€
Tools
Feeler Gauges
MFG002
25- Blade
.0015" -
.035"
n.a.
U.S. Pitch Gauge
M3118PG
Measures number of threads per inch
8.00
Essential tool for determining all UNF/UNC and special thread sizes.
Thread Files
To restore externally damaged threads.
MTR1
Contains most popular sizes
(11, 12, 13, 14, 16, 18, 20, 24 threads per inch)
MTR2
Contains less used sizes
(9, 10, 12, 16, 20, 27, 28, 32 threads per inch)
R1080
Solid brass hammer, 48 oz.
1-1/4" head
n.a.
13.00
65.00
R1081
Solid brass punch set, 4-piece
75.00
Includes 3/8", 1/2", 5/8", 3/4" punch, use 3/8" punch for setting oil pump
check valve ball.
Grease Guns
- Alemite connections are used with “Alemite” nipples (´24-´37 models).
- Hydraulic connections are for use with ´38-up “Zerk” grease nipples.
GG1
Grease gun, with hydraulic connection
GG3
Grease gun, with Alemite connection
Grease gun for Alemite nipples uses flexible hose.
GG4
GG6
High pressure hose only
Alemite nipple head
n.a.
n.a.
9.50
26.00
GG6
R0340
Alemite grease nipple
Nickle ´24-´37
3.00 ✪
R0340
www.jwboon.com
39
€
prices
in euro
Heli-Coil® / Taps & Dies
Heli-Coil® has the most effective and universally accepted method of
thread repair. Heli-Coil® inserts quickly and permanently restore
stripped, worn or damaged threads to their original size and condition.
Heli-Coil® Thread Repair Kits
Individual kits come complete with a quantity of Heli-Coil® stainless
steel inserts, a tap and an installation tool, order correct size drill
seperately. All kits come with step-by-step instructions.
Heli-Coil® Kits, UNF-UNC
Kit
Thread
H5521-2
8-32
H5521-3
10-24
H5528-3
10-32
H5521-1
12-24
H5521-4
1/4"-20
H5528-4
1/4"-28
H5521-5
5/16"-18
H5528-5
5/16"-24
H5521-6
3/8"-16
H5528-6
3/8"-24
H5521-7
7/16"-14
H5528-7
7/16"-20
Inserts only, UNF-UNC
Set
Thread
HR1185-2
8-32
HR1185-3
10-24
HR1191-3
10-32
HR1185-1
12-24
HR1185-4
1/4"-20
HR1191-4
1/4"-28
HR1185-5
5/16"-18
HR1191-5
5/16"-24
HR1185-6
3/8"-16
HR1191-6
3/8"-24
HR1185-7
7/16"-14
HR1191-7
7/16"-20
Inserts
12
12
12
12
12
12
12
12
12
12
6
6
Inserts
12
12
12
12
12
12
12
12
12
12
6
6
Length
.246"
.285"
.285"
.324"
.375"
.375"
.469"
.469"
.562"
.562"
.656"
.656"
Length
.246"
.285"
.285"
.324"
.375"
.375"
.469"
.469"
.562"
.562"
.656"
.656"
Use drill
11/64"
13/64"
13/64"
15/64"
17/64"
17/64"
21/64"
21/64"
25/64"
25/64"
29/64"
26/64"
56.00
56.00
65.00
57.00
43.00
65.00
41.00
56.00
44.00
56.00
44.00
58.00
20.00
21.00
21.00
21.00
21.00
21.00
21.00
21.00
26.00
26.00
20.00
20.00
Heli-Coil® Kits, Special
Kit
Thread
Inserts Length
Use drill
H5540-4
1/4"-24
12
.500"
17/64"
Gear cover screws, tappet guide screws, oil pump, etc, etc.
H5540-6
3/8"-20
6
.375"
25/64"
Brake drum wheel bolts 1936-1972.
H5540-7
7/16"-16
6
.656"
29/64"
Headbolts 1930-1973 Flatheads, 1936-1947 Knucklehead.
H5521-8-2
1/2"-13
6
.375"
17/32"
Early Sportster engine and transmission.
H5528-8-2
1/2"-20
6
.375"
33/64"
Primary plug, Sportster transmission.
H5528-10-2
5/8"-18
6
.325"
41/64"
Timing hole plug ´31-up.
H5523-14
M14-1.25 30
3/8"
Spark plugs 1948-1974 Panhead, Shovelhead, Sportster.
H5523-18
M18-1.50 24
.500"
Spark plugs 1930-1973 Flatheads, 1936-1947 Knucklehead.
H5407-2
1/8"-27 NPT
Inserts only, Special
Set
Thread
Inserts
HR389-4
1/4"-24
12
HR389-6
3/8"-20
6
HR389-7-2
7/16"-16
6
HR1185-8-2
1/2"-13
6
HR1191-8-2
1/2"-20
6
HR1191-10-2 5/8"-18
6
HR512
M14-1.25 6
HR514-6
M18-1.50 6
HR327-2
1/8"-27 NPT
12
Length
.500"
.375"
.656"
.375"
.375"
.325"
3/8"
.500"
125.00
83.00
150.00
75.00
77.00
140.00
165.00
280.00
170.00
24.00
16.00
24.00
21.00
24.00
38.00
17.50
24.00
30.00
Taps and Dies, Special Sizes
tap160-001
7/32"-32
tap
n.a.
M1421T
die160-005
tap160-003
1/4"-24
1/4"-24
1/4"-32
tap
die
tap
7.00
n.a.
10.00
tap160-002
1/4"-40
tap
15.00
tap160-011
tap160-809
9/32"-32
5/16"-32
tap
tap
n.a.
10.00
tap160-807
die160-007
3/8"-20
3/8"-20
tap
die
10.00
n.a.
Wheel bolts 1936-1972.
tap160-416
die160-006
tap160-012
7/16"-16
7/16"-16
7/16"-24
tap
die
tap
n.a.
n.a.
32.00
Head bolts, all Flatheads with headbolts 1930-1973,
all Knuckleheads 1936-1947.
Oversize cylinder head studs 750cc.
tap160-010
C9407-1
7/16"-28
11/16"-16
tap
tap
n.a.
32.00
750cc models ´41-´73 clutch lever.
Oversize timing hole plug
tap160-004
die160-008
tap160-904
3/4"-18
3/4"-20
13/16"-24
tap
die
tap
n.a.
n.a.
n.a.
tap160-905
die160-009
7/8"-24
7/8"-24
tap
die
n.a.
75.00
40
Tank top filler strip 750cc ´37-´73, tank mounting, all models´18-´35.
This thread size has many applications on the older Harley’s, including
gear cover screws, tappet guide screws, oil pump nuts, etc.
Linkert carburetor float lever pin (1196-11 and 1197-16) and bowl drain
screw (1269-39), also oversize tank top screw.
Linkert carburetor low and high speed needle.
(in housing and in lever 1292-27)
Bendix carburetors.
Grease nipples, 1924 and later.
1940-1965 petrol valve nipple in tank.
Linkert carburetor bowl lock nut ( 1268-29 )
Handlebar end screw 750cc models ´31-´39, all models ´31-´35.
Handlebar end screw ( 3330-36 ), 1936-1948.
Fork stem 750cc models.
€ prices in euro €
prices
in euro
€
Taps, Dies, Drills
Taps, high carbon steel, UNF/UNC
M1111T
M1112T
M1118T
M1124T
M1128T
M1131T
M1132T
M1135T
M1412T
M1420T
M1423T
4-36
4-40
6-32
8-32
10-24
10-32
12-24
14-20
3/16"-24
1/4"-20
1/4"-28
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
4.50
M1427T
M1429T
M1434T
M1436T
M1439T
M1440T
M1444T
M1445T
M1448T
M1449T
5/16"-18
5/16"-24
3/8"-16
3/8"-24
7/16"-14
7/16"-20
1/2"-13
1/2"-20
9/16"-12
9/16"-18
5.75
5.75
6.00
6.00
7.00
7.00
8.00
8.00
11.00
11.00
5/16"-18
5/16"-24
3/8"-16
3/8"-24
7/16"-14
7/16"-20
1/2"-13
1/2"-20
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
Dies, high carbon steel, UNF/UNC
M6112DI
M6118DI
M6124DI
M6128DI
M6131DI
M6132DI
M6520DI
M6523DI
4-40
6-32
8-32
10-24
10-32
12-24
1/4"-20
1/4"-28
8.00
8.00
8.00
8.00
8.00
8.00
8.00
8.00
M6527DI
M6529DI
M6534DI
M6536DI
M6539DI
M6540DI
M6544DI
M6545DI
Drills
General purpose drills made of fine quality high speed steel.
Hardened and tempered with extreme accuracy to retain sharpness and long life.
Fractional Sizes
M6104D 1/16"
M6105D 5/64"
M6106D 3/32"
M6107D 7/64"
M6108D 1/8"
M6109D 9/64"
M6110D 5/32"
M6111D 11/64"
Letter Sizes
M4101D A
M4102D B
M4103D C
M4104D D
M4105D E
M4106D F
M4107D G
.234"
.238
.242
.246
.250
.257
.261
Number Sizes
M8101D
1
M8102D
2
M8103D
3
M8104D
4
M8105D
5
M8106D
6
M8107D
7
M8108D
8
M8109D
9
M8110D 10
M8111D 11
M8112D 12
M8113D 13
M8114D 14
M8115D 15
M8116D 16
M8117D 17
M8118D 18
M8119D 19
M8120D 20
.228
.221
.213
.209
.205
.204
.201
.199
.196
.193
.191
.189
.185
.182
.180
.177
.173
.169
.166
.161
2.00
2.00
2.00
2.00
3.00
3.00
3.00
3.00
M6112D
M6113D
M6114D
M6115D
M6116D
M6117D
M6118D
M6119D
3/16"
13/64"
7/32"
15/64"
1/4"
17/64"
9/32"
19/64"
4.00
4.00
4.00
4.00
4.00
5.00
5.00
M4108D
M4109D
M4110D
M4111D
M4112D
M4113D
M4114D
H
I
J
K
L
M
N
.266
.272
.277
.281
.290
.295
.302
M8121D
M8122D
M8123D
M8124D
M8125D
M8126D
M8127D
M8128D
M8129D
M8130D
M8131D
M8132D
M8133D
M8134D
M8135D
M8136D
M8137D
M8138D
M8139D
M8140D
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
.159
.157
.154
.152
.149
.147
.144
.140
.136
.128
.120
.116
.113
.111
.110
.106
.104
.101
.099
.098
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
4.00
3.50
3.50
3.50
3.50
3.50
3.50
2.50
2.50
2.50
3.50
3.50
3.50
5.00
5.00
5.00
5.00
7.00
M6120D
M6121D
M6122D
M6123D
M6124D
M6125D
M6126D
M6127D
5/16"
21/64"
11/32"
23/64"
3/8"
25/64"
13/32"
27/64"
5.00
5.00
5.75
5.75
5.75
6.75
6.75
M4115D
M4116D
M4117D
M4118D
M4119D
M4120D
M4121D
O
P
Q
R
S
T
U
.316
.323
.332
.339
.348
.358
.368
M8141D
M8142D
M8143D
M8144D
M8145D
M8146D
M8147D
M8148D
M8149D
M8150D
M8151D
M8152D
M8153D
M8154D
M8155D
M8156D
M8157D
M8158D
M8159D
M8160D
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
.096
.093
.089
.086
.082
.081
.078
.076
.073
.070
.067
.063
.059
.055
.052
.046
.043
.042
.041
.040
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
www.jwboon.com
7.00
9.00
9.00
8.75
9.50
9.50
9.50
12.00
M6128D
M6129D
M6130D
M6131D
M6132D
M9134D
7/16"
12.00
29/64"
15.00
15/32"
15.00
31/64"
17.00
1/2"
17.00
17/32"
32.50
( 1/2" shank )
6.75
8.00
8.00
8.00
9.75
9.75
9.75
M4122D
M4123D
M4124D
M4125D
M4126D
V
W
X
Y
Z
.377
.386
.397
.404
.413
9.75
9.75
11.50
12.50
14.50
M8161D
M8162D
M8163D
M8164D
M8165D
M8166D
M8167D
M8168D
M8169D
M8170D
M8171D
M8172D
M8173D
M8174D
M8175D
M8176D
M8177D
M8178D
M8179D
M8180D
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
.039
.038
.037
.036
.035
.033
.032
.031
.0292
.028
.026
.025
.025
.0225
.021
.020
.018
.016
.0145
.0135
2.30
2.30
2.30
2.30
2.30
2.30
2.30
2.30
2.30
2.30
2.30
2.30
2.30
2.30
2.70
2.70
2.70
2.70
2.70
2.70
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.00
2.30
2.30
2.30
2.30
2.30
41
€
prices
in euro
Screws, Bolts, Nuts
Round Head Screws
Fillister Head Screws
Oval Countersunk Head Screws
Listed by size.
Listed by size.
Listed by size.
R016P
R016Z
R013Z
R018P
R018
R018C
4940-35
R019P
R019
R027P
R027
R026Z
R030
R030P
R030Z
R030C
R030NI
R031P
R031Z
R031C
R034
R034P
R034Z
R034C
4941-35
R041P
R041Z
R043P
R043Z
R4918-35P
R4918-35
R4918-35C
050
R050P
R050
R050C
R050NI
R051P
R051
R051C
R051NI
052
R052P
R052
R052C
053
R053
R053P
053Z
R053C
R053NI
42
6-32 x 3/8"
6-32 x 3/8"
6-32 x 7/8"
8-32 x 1/4"
8-32 x 1/4"
8-32 x 1/4"
8-32 x 1/4"
8-32 x 5/16"
8-32 x 5/16"
8-32 x 5/8"
8-32 x 5/8"
8-32 x 1"
10-24 x 3/8"
10-24 x 3/8"
10-24 x 3/8"
10-24 x 3/8"
10-24 x 3/8"
10-24 x 1/2"
10-24 x 1/2"
10-24 x 1/2"
10-32 x 1/4"
10-32 x 1/4"
10-32 x 1/4"
10-32 x 1/4"
10-32 x 1/4"
12-24 x 3/8"
12-24 x 3/8"
12-24 x 1/2"
12-24 x 1/2"
12-24 x 3/4"
12-24 x 3/4"
12-24 x 3/4"
1/4-24 x 7/16"
1/4-24 x 7/16"
1/4-24 x 7/16"
1/4-24 x 7/16"
1/4-24 x 7/16"
1/4-24 x 1/2"
1/4-24 x 1/2"
1/4-24 x 1/2"
1/4-24 x 1/2"
1/4-24 x 5/8"
1/4-24 x 5/8"
1/4-24 x 5/8"
1/4-24 x 5/8"
1/4-24 x 3/4"
1/4-24 x 3/4"
1/4-24 x 3/4"
1/4-24 x 3/4"
1/4-24 x 3/4"
1/4-24 x 3/4"
park
zinc
zinc
park
cad
chrome
zinc
park
cad
park
cad
zinc
cad
park
zinc
chrome
Nickle
park
zinc
chrome
cad
park
zinc
chrome
zinc
park
zinc
park
zinc
park
cad
chrome
park
park
cad
chrome
Nickle
park
cad
chrome
Nickle
park
park
cad
chrome
park
cad
park
zinc
chrome
Nickle
0.50
0.30
0.30
0.45
0.50
0.60
1.00
0.45
0.50
0.50
0.55
0.50
0.55
0.50
0.30
0.60
0.60
0.50
0.30
0.60
0.50
0.50
0.30
0.60
1.00
0.60
0.30
0.55
0.30
0.80
0.85
1.50
2.00
1.10
1.15
1.30
1.50
1.15
1.20
2.10
1.75
2.00
1.20
1.25
1.75
3.00
1.30
1.25
2.00
1.80
3.00
R010P
6-32 x 1/4"
zinc
R010Z
6-32 x 1/4"
zinc
R011P
6-32 x 3/8"
park
R011Z
6-32 x 3/8"
zinc
R011C
6-32 x 3/8"
chrome
R020
8-32 x 1/4"
cad
R020P
8-32 x 1/4"
park
R020Z
8-32 x 1/4"
zinc
R020C
8-32 x 1/4"
chrome
R021P
8-32 x 3/8"
park
R021
8-32 x 3/8"
cad
R021Z
8-32 x 3/8"
zinc
R021C
8-32 x 3/8"
chrome
R021NI
8-32 x 3/8"
Nickle
4918-42
8-32 x 3/8"
green
R024P
8-32 x 3/4"
park
R024Z
8-32 x 3/4"
zinc
R024C
8-32 x 3/4"
chrome
R026P
8-32 x 1"
park
R030AP
10-24 x 3/8"
park
R030A
10-24 x 3/8"
cad
R030AZ
10-24 x 3/8"
zinc
R032P
10-24 x 1/2"
park
R032
10-24 x 1/2"
cad
R032C
10-24 x 1/2"
chrome
R033P
10-24 x 5/8"
park
R033
10-24 x 5/8"
cad
R033Z
10-24 x 5/8"
zinc
R033C
10-24 x 5/8"
chrome
R033LP
10-24 x 3/4"
park
R033L
10-24 x 3/4"
cad
R033LC
10-24 x 3/4"
chrome
R033XL
10-24 x 1"
cad
R033XLC 10-24 x 1"
chrome
R035P
10-32 x 3/8"
park
R035
10-32 x 3/8"
cad
R035C
10-32 x 3/8"
chrome
R035NI
10-32 x 3/8"
Nickle
R036P
10-32 x 1/2"
park
R036
10-32 x 1/2"
cad
R036C
10-32 x 1/2"
chrome
R036NI
10-32 x 1/2"
Nickle
R037P
10-32 x 5/8"
park
R037
10-32 x 5/8"
cad
R037C
10-32 x 5/8"
chrome
R037NI
10-32 x 5/8"
Nickle
R038P
10-32 x 3/4"
park
R038Z
10-32 x 3/4"
zinc
R038C
10-32 x 3/4"
chrome
R038AP
10-32 x 7/8"
park
R038A
10-32 x 7/8"
cad
R1523-26 10-32 x 1-1/4" zinc
R042P
12-24 x 1/2"
park
R042
12-24 x 1/2"
cad
R042C
12-24 x 1/2"
chrome
R042NI
12-24 x 1/2"
Nickle
4967-42MD 12-24 x 1/2" special
R044P
12-24 x 7/8"
park
R044Z
12-24 x 7/8"
zinc
R044C
12-24 x 7/8"
chrome
0.35
0.30
0.45
0.30
0.60
0.50
0.45
0.30
0.60
0.50
0.50
0.30
0.60
0.70
0.40
0.50
0.30
0.60
0.60
0.50
0.60
0.30
0.50
0.55
0.65
0.50
0.55
0.30
0.70
0.60
0.60
0.80
0.60
0.80
0.50
0.55
0.65
0.65
0.50
0.55
0.65
0.65
0.50
0.55
0.90
0.90
0.50
0.40
0.70
0.50
0.50
1.00
0.50
0.55
0.70
0.65
1.50
n.a.
0.50
0.70
2265W
12-24 x 3/8"
R048AP
12-24 x 1/2"
R048A
12-24 x 1/2"
R048AC
12-24 x 1/2"
047
12-24 x 13/16"
R047P
12-24 x 13/16"
047cad
12-24 x 13/16"
R047
12-24 x 13/16"
R047C
12-24 x 13/16"
R1409-41MP 12-24 x 2-1/4"
R1409-41M 12-24 x 2-1/4"
R057P
1/4-24 x 13/16"
R057
1/4-24 x 13/16"
R057C
1/4-24 x 13/16"
R057NI
1/4-24 x 13/16"
R2268-36P 1/4-24 x 13/16"
R2268-36 1/4-24 x 13/16"
R2268-36C 1/4-24 x 13/16"
056
1/4-24 x 1-1/8"
R056P
1/4-24 x 1-1/8"
R056
1/4-24 x 1-1/8"
R056C
1/4-24 x 1-1/8"
R056NI
1/4-24 x 1-1/8"
2341HW 1/4-24 x 1-1/8"
R1523-32P 1/4-24 x 2"
R1523-32 1/4-24 x 2"
R1523-32C 1/4-24 x 2"
R1523-36P 1/4-24 x 3"
R1523-36 1/4-24 x 3"
R1523-36C 1/4-24 x 3"
058
5/16-18 x 13/16"
R3805-30AP 5/16-24 x 19/32"
R3805-30A 5/16-24 x 19/32"
R3749-30P 5/16-24 x 27/32"
R3749-30 5/16-24 x 27/32"
R3749-30C 5/16-24 x 27/32"
zinc
park
cad
chrome
park
park
cad
cad
chrome
park
cad
park
cad
chrome
Nickle
park
cad
chrome
park
park
cad
chrome
Nickle
zinc
park
cad
chrome
park
cad
chrome
bare
park
cad
park
cad
chrome
1.00
0.75
0.80
1.00
2.00
1.10
2.00
1.15
1.35
3.25
3.25
0.90
0.95
1.75
1.75
1.00
1.15
1.50
1.50
1.30
1.35
1.65
1.65
1.00
3.00
3.00
4.00
3.25
3.25
4.50
3.00
4.00
4.00
3.00
3.00
3.50
prices
in euro
€
Screws, Bolts, Nuts
Hex Head Bolts
About hex head markings:
'41 and earlier bolts were usually made by Harley and were not
marked (plain head). War-time production saw the arrival of other
suppliers, these could be marked "1035 cp" or "1038 cp".
Listed by size:
R4518-36
R4518-36C
R1409-36P
R1409-36
R054Z
R054C
R692-41P
R692-41
R692-41C
054A
1123-29
R1123-29
R1123-29C
053E
R053EP
7223-34
R7223-34
R7223-34C
R13332-25AP
13332-25Acad
R13332-25A
R13332-25AC
R1725-30P
R054WZ
R054WC
443-37P
443-37
061
R061P
R061Z
R061
R061C
060
R064PS
R064P
R064Z
R064
R064C
R064EP
R066PS
R066P
R066Z
R066C
R066AP
R3748-26P
R3748-26
R3748-26C
R066BP
069
068
R068PS
R068P
R068
R068C
R3529-37PS
R3529-37P
R3529-37
R3529-37C
10-32 x 5/16"
10-32 x 5/16"
12-24 x 3/8"
12-24 x 3/8"
1/4-20 x 1"
'grade'
1/4-20 x 1"
1/4-20 x 1-1/4"
1/4-20 x 1-1/4"
'grade'
1/4-20 x 1-1/4"
1/4-24 x 1/2"
1/4-24 x 5/8"
1/4-24 x 5/8"
1/4-24 x 5/8"
1/4-24 x 3/4"
1/4-24 x 3/4"
1/4-24 x 3/4"
'1035 cp'
1/4-24 x 3/4"
1/4-24 x 3/4"
1/4-24 x 1-5/8"
1/4-24 x 1-5/8"
'rockford'
1/4-24 x 1-5/8"
1/4-24 x 1-5/8"
1/4-28 x 7/16"
1/4-28 x 5/8"
1/4-28 x 5/8"
5/16-18 x 2-3/4"
5/16-18 x 2-3/4"
'1035 cp'
5/16-24 x 1/2"
'1035 cp'
5/16-24 x 1/2"
'1038 cp'
5/16-24 x 1/2"
'grade'
5/16-24 x 1/2"
'1038 cp'
5/16-24 x 1/2"
5/16-24 x 9/16"
5/16-24 x 3/4"
5/16-24 x 3/4"
'1038 cp'
5/16-24 x 3/4"
'grade'
5/16-24 x 3/4"
''1038 cp'
5/16-24 x 3/4"
5/16-24 x 7/8"
'1038 cp'
5/16-24 x 1"
'1038 cp'
5/16-24 x 1"
'1038 cp'
5/16-24 x 1"
'grade'
5/16-24 x 1"
5/16-24 x 1-1/8"
'1038 cp'
5/16-24 x 1-1/8"
'1038 cp'
5/16-24 x 1-1/8"
'grade'
5/16-24 x 1-1/8"
5/16-24 x 1-3/8"
'1038 cp'
5/16-24 x 1-3/8" dome head
5/16-24 x 1-13/16" '1035 cp'
5/16-24 x 1-13/16"
5/16-24 x 1-13/16" '1038 cp'
5/16-24 x 1-13/16" '1038 cp'
5/16-24 x 1-13/16"
5/16-24 x 2-1/4"
5/16-24 x 2-1/4"
'1038 cp'
5/16-24 x 2-1/4"
'1038 cp'
5/16-24 x 2-1/4"
cad
chrome
park
cad
zinc
chrome
park
cad
chrome
zinc
park
cad
chrome
park
park
park
cad
chrome
park
cad
cad
chrome
park
zinc
chrome
park
cad
park
park
zinc
cad
chrome
park
park
park
zinc
cad
chrome
park
park
park
zinc
chrome
park
park
cad
chrome
park
park
park
park
park
cad
chrome
park
park
cad
chrome
1.80
2.00
2.00
2.00
0.40
1.30
1.50
1.50
2.00
4.00
1.50
2.50
3.25
3.00
2.00
4.00
2.00
3.00
2.50
3.20
2.50
3.25
1.50
0.50
1.30
3.50
3.00
2.50
1.30
0.35
1.35
1.40
3.00
1.45
1.45
0.35
1.50
1.70
1.75
1.75
1.75
0.50
1.30
1.85
2.00
2.00
2.50
2.00
1.50
3.00
2.10
2.10
2.25
1.50
2.50
2.50
2.60
3.00
'1035 cp'
'1038 cp'
'grade'
Hex Head Bolts (continued)
R3529-36PS
R3529-36P
R3529-36C
R070P
R070Z
R070
R070C
R072Z
R2263-36BP
R2263-36B
R2263-36BC
R071P
R071
R071C
R073P
R073
R073C
R444-30P
R444-30
R444-30C
R074P
R074Z
R074C
R074NI
2823-26
R2823-26P
R2823-26
R2823-26C
4336W
2100-16
R079P
R079
R079C
R078C
R075
R075C
R075P
R437-26P
R437-26
R437-26C
R437-36P
R437-36
R437-36C
R438-36P
R438-36
R438-36C
2807-30
2807-3035
R080P
R080Z
R080C
R6033-30P
R6033-30
R6033-30C
14-30
5/16-24 x 2-5/8"
5/16-24 x 2-5/8"
'1038 cp'
5/16-24 x 2-5/8"
3/8-16 x 3/4"
'1035 cp'
3/8-16 x 3/4"
'grade'
3/8-16 x 3/4"
'1035 cp'
3/8-16 x 3/4"
3/8-16 x 7/8"
'grade'
3/8-16 x 1"
3/8-16 x 1"
'grade'
3/8-16 x 1"
3/8-16 x 1-3/16"
3/8-16 x 1-3/16"
3/8-16 x 1-3/16"
3/8-16 x 1-3/8"
3/8-16 x 1-3/8"
3/8-16 x 1-3/8"
3/8-16 x 3-1/4"
3/8-16 x 3-1/4"
3/8-16 x 3-1/4"
3/8-24 x 3/4"
3/8-24 x 3/4"
'grade'
3/8-24 x 3/4"
3/8-24 x 3/4"
3/8-24 x 7/8"
3/8-24 x 7/8"
3/8-24 x 7/8"
3/8-24 x 7/8"
3/8-24 x 1-1/8"
'grade'
3/8-24 x 1-1/8" 'dome head'
3/8-24 x 1-1/8"
3/8-24 x 1-1/8"
3/8-24 x 1-1/8"
3/8-24 x 1-1/4"
3/8-24 x 1-3/8"
3/8-24 x 1-3/8"
3/8-24 x 1-3/8"
3/8-24 x 1-3/4"
'1035 cp'
3/8-24 x 1-3/4"
'1035 cp'
3/8-24 x 1-3/4"
3/8-24 x 2-5/8"
3/8-24 x 2-5/8"
'1038 cp'
3/8-24 x 2-5/8"
3/8-24 x 3-5/16"
'1038 cp'
3/8-24 x 3-5/16"
'1038 cp'
3/8-24 x 3-5/16"
7/16-20 x 1"
7/16-20 x 1"
'1035 cp'
7/16-20 x 1-1/2"
7/16-20 x 1-1/2"
'grade'
7/16-20 x 1-1/2"
7/16-20 x 1-5/16"
'1035 cp'
7/16-20 x 1-5/16"
'1035 cp'
7/16-20 x 1-5/16"
7/16-20 x 1-3/4"
part numbers not starting with R or C are original new parts (new old stock)
park
park
chrome
park
zinc
cad
chrome
zinc
park
cad
chrome
park
cad
chrome
park
cad
chrome
park
cad
chrome
park
zinc
chrome
Nickle
park
park
cad
chrome
zinc
park
park
cad
chrome
chrome
cad
chrome
park
park
cad
chrome
park
cad
chrome
park
cad
chrome
park
park
park
zinc
chrome
park
cad
chrome
park
2.75
2.75
1.50
2.70
0.50
2.75
1.40
0.50
1.75
1.85
2.25
3.00
3.00
3.75
3.00
3.00
3.75
3.50
3.50
4.25
1.00
0.50
1.40
1.50
7.00
4.00
4.00
5.00
2.50
4.00
3.25
3.35
3.85
1.50
4.50
5.00
4.50
5.00
5.00
6.00
5.00
5.00
6.00
6.00
6.00
7.00
5.00
8.00
5.00
0.70
1.70
2.50
2.50
3.75
6.00
43
€
prices
in euro
Screws, Bolts, Nuts
About nuts:
Early 1940's and
earlier nuts were
mostly manufactured by H-D and
were machined
from stock. These
nuts are clearly
different than the
later style nuts.
We have marked
all the nuts on
this page with a
'm' to indicate
that they are
machined.
'machined'
(sharp edges)
not 'machined'
(round edges)
44
Nuts
Nuts (continued)
Listed by size:
R0129A
3/8-24 x 7/32" x 9/16"
R0129AC 3/8-24 x 7/32" x 9/16"
R0129C
3/8-24 x 7/32" x 9/16"
0129
3/8-24 x 1/4" x 9/16"
'm'
R0129P
3/8-24 x 1/4" x 9/16"
'm'
R0129
3/8-24 x 1/4" x 9/16"
'm'
0129C
3/8-24 x 1/4" x 9/16"
'm'
0129Z
3/8-24 x 1/4" x 9/16"
'm'
R0127P
3/8-24 x 21/64" x 9/16" 'm'
R0127Z
3/8-24 x 21/64" x 9/16"
R0127
3/8-24 x 21/64" x 9/16" 'm'
R0127C
3/8-24 x 21/64" x 9/16"
R0127NI 3/8-24 x 21/64" x 9/16" 'm'
R0123P
3/8-24 x 1/2" x 9/16"
'm'
R0123
3/8-24 x 1/2" x 9/16"
'm'
R0123C
3/8-24 x 1/2" x 9/16"
R0123NI 3/8-24 x 1/2" x 9/16"
'm'
2633-30A 3/8-24 x 7/32" x 5/8"
'm'
R0125P
3/8-24 x 1/4" x 5/8"
'm'
R2318-36AP 3/8-24 x 21/64" x 5/8" 'm'
R2318-36A 3/8-24 x 21/64" x 5/8" 'm'
R2318-36AC 3/8-24 x 21/64" x 5/8" 'm'
0128
3/8-24 x 9/16" castle
R0128P
3/8-24 x 9/16" castle
R0128
3/8-24 x 9/16" castle
R0128C
3/8-24 x 9/16" castle
R0128NI 3/8-24 x 9/16" castle
3910-37
3/8-24 x 15/16" castle
R3910-37P 3/8-24 x 15/16" castle
R3910-37 3/8-24 x 15/16" castle
R3910-37C 3/8-24 x 15/16" castle
R7775P
3/8-24 x 9/16" flexloc
R7775
3/8-24 x 9/16" flexloc
R0130P
7/16-18 x 1/4" x 11/16" 'm'
R0130
7/16-18 x 1/4" x 11/16" 'm'
R0130NI 7/16-18 x 1/4" x 11/16" 'm'
R4166-28P 7/16-20 x 1/4" x 9/16" 'm'
R4166-28 7/16-20 x 1/4" x 9/16" 'm'
R4166-28C 7/16-20 x 1/4" x 9/16" 'm'
R0136P
7/16-20 x 1/4" x 5/8"
'm'
R0136
7/16-20 x 1/4" x 5/8"
'm'
R0136C
7/16-20 x 1/4" x 5/8"
'm'
R0133P
7/16-20 x 3/8" x 5/8"
'm'
R0133
7/16-20 x 3/8" x 5/8"
'm'
R0133C
7/16-20 x 3/8" x 5/8"
'm'
0134
7/16-20 x 1/2" x 5/8"
'm'
R0134P
7/16-20 x 1/2" x 5/8"
'm'
R0134
7/16-20 x 1/2" x 5/8"
'm'
R0134C
7/16-20 x 1/2" x 5/8"
'm'
R0134NI 7/16-20 x 1/2" x 5/8"
'm'
0138
7/16-20 x 5/8" castle
R7825P
7/16-20 x 5/8" flexlock
R7825
7/16-20 x 5/8" flexlock
R7872
7/16-20 x 5/8" red cap
R7872B
7/16-20 x 5/8" black cap
R7863
7/16-20 x 3/8" x 3/4"
'm'
R7863C
7/16-20 x 3/8" x 3/4"
'm'
R2644-30P 7/16-20 x 7/16" x 3/4" 'm'
R2644-30 7/16-20 x 7/16" x 3/4" 'm'
R2644-30C 7/16-20 x 7/16" x 3/4" 'm'
2641-30
7/16-20 x 9/32" x 13/16" 'm'
2641-30C 7/16-20 x 9/32" x 13/16" 'm'
R4079-26P 7/16-20 x 13/32" x 13/16"'m'
R4079-26 7/16-20 x 13/32" x 13/16"'m'
0131
7/16-24 x 1/4" x 3/4"
'm'
0135A
1/2-13 x 1/2" x 7/8"
R2634-30AP 1/2-20 x 3/8" x 3/4"
'm'
R2634-30A 1/2-20 x 3/8" x 3/4"
'm'
R2634-30AC 1/2-20 x 3/8" x 3/4"
'm'
R0101P
R0101B
R0101Z
R0103P
R0103
R0103Z
R0104P
R0104
R0104Z
R0104C
R0104FP
R0104F
R0104FNI
4434-23
0105cop
R0105cop
0105copm
0105cad
R0105Z
R0105C
R0105AP
R0105AZ
R0105AC
R0106P
R0106
R0106Z
R0107C
R0107P
R0107
0108
R0108P
R0108M
R0108C
R0108NI
0109
0109C
451-37
R451-37P
R451-37
R451-37C
R0111P
R0111Z
R0111
R0111C
R0111NI
R0112P
R0112
R0112NI
R0117BP
R0117B
R0117BC
R0117P
R0117Z
R0117
R0117M
R0117C
R0117NI
R7725
R7725C
R0117A
R0120P
R0120
R0120C
R0120NI
R0129AP
6-32 x 7/64" x 5/16"
6-32 x 7/64" x 5/16"
6-32 x 7/64" x 5/16"
8-32 x 1/8" x 11/32"
8-32 x 1/8" x 11/32"
8-32 x 1/8" x 11/32"
10-24 x 1/8" x 3/8"
10-24 x 1/8" x 3/8"
10-24 x 1/8" x 3/8"
10-24 x 1/8" x 3/8"
10-24 x 3/8" flexlock
10-24 x 1/4" x 3/8"
10-32 x 1/8" x 5/16"
10-32 x 1/8" x 5/16"
10-32 x 1/8" x 5/16"
10-32 x 1/8" x 5/16"
10-32 x 1/8" x 5/16"
10-32 x 1/8" x 5/16"
10-32 x 1/8" x 3/8"
10-32 x 1/8" x 3/8"
10-32 x 1/8" x 3/8"
12-24 x 5/32" x 7/16"
12-24 x 5/32" x 7/16"
12-24 x 5/32" x 7/16"
1/4-20 x 1/4" x 7/16"
1/4-20 x 1/4" x 1/2"
1/4-20 x 1/4" x 1/2"
1/4-24 x 5/32" x 7/16"
1/4-24 x 5/32" x 7/16"
1/4-24 x 5/32" x 7/16"
1/4-24 x 5/32" x 7/16"
1/4-24 x 5/32" x 7/16"
1/4-24 x 7/32" x 7/16"
1/4-24 x 7/32" x 7/16"
1/4-24 x 1/4" x 1/2"
1/4-24 x 1/4" x 1/2"
1/4-24 x 1/4" x 1/2"
1/4-24 x 1/4" x 1/2"
5/16-18 x 17/64" x 1/2"
5/16-18 x 17/64" x 1/2"
5/16-18 x 17/64" x 1/2"
5/16-18 x 17/64" x 1/2"
5/16-18 x 17/64" x 1/2"
5/16-24 x 17/64" x 7/16"
5/16-24 x 17/64" x 7/16"
5/16-24 x 17/64" x 7/16"
5/16-24 x 3/16" x 1/2"
5/16-24 x 3/16" x 1/2"
5/16-24 x 3/16" x 1/2"
5/16-24 x 17/64" x 1/2"
5/16-24 x 17/64" x 1/2"
5/16-24 x 17/64" x 1/2"
5/16-24 x 17/64" x 1/2"
5/16-24 x 17/64" x 1/2"
5/16-24 x 17/64" x 1/2"
5/16-24 x 1/2" flexloc
5/16-24 x 1/2" flexloc
5/16-24 x 5/16" x 9/16"
3/8-16 x 5/16" x 9/16"
3/8-16 x 5/16" x 9/16"
3/8-16 x 5/16" x 9/16"
3/8-16 x 5/16" x 9/16"
3/8-24 x 7/32" x 9/16"
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
'm'
park
0.40
brass 0.40
zinc
0.40
park
0.40
cad
0.40
zinc
0.40
park
0.40
cad
0.40
zinc
0.40
chrome 0.50
park
0.85
cad
0.85
Nickle 1.35
cad
1.70
brass 0.70
brass 0.40
brass 1.30
cad
1.00
zinc
0.30
chrome 0.50
park
0.50
zinc
0.50
chrome 0.50
park
0.40
cad
0.40
zinc
0.30
chrome 0.70
park
0.90
cad
0.95
park
1.50
park
0.90
cad
0.95
chrome 0.70
Nickle 1.25
park
2.00
chrome 2.30
park
2.00
park
0.90
cad
0.90
chrome 1.25
park
0.90
zinc
0.30
cad
0.95
chrome 0.80
Nickle 1.00
park
1.00
cad
1.10
Nickle 1.20
park
1.00
cad
1.10
chrome 1.20
park
0.95
zinc
0.30
cad
0.40
cad
1.00
chrome 0.75
Nickle 1.35
cad
1.50
chrome 1.55
park
1.15
park
1.15
cad
1.20
chrome 1.35
Nickle 1.40
park
1.00
cad
1.00
chrome 1.35
chrome 1.35
park
1.50
park
1.15
cad
1.25
chrome 2.50
zinc
2.00
park
1.20
zinc
0.30
cad
1.30
chrome 0.85
Nickle 1.60
park
1.20
cad
1.35
chrome 2.25
Nickle 1.90
bare
2.00
park
1.20
park
1.30
cad
1.35
chrome 1.50
park
2.50
park
1.60
cad
1.70
chrome 1.85
Nickle 2.00
park
3.00
park
2.75
cad
2.75
chrome 3.50
park
2.25
cad
2.25
park
1.30
cad
1.65
Nickle 1.80
park
1.40
cad
1.50
chrome 2.00
park
1.30
cad
1.35
chrome 1.40
park
1.30
cad
1.35
chrome 1.50
park
2.00
park
1.35
cad
1.45
chrome 2.50
Nickle 2.50
cad
3.20
park
3.00
cad
3.15
2.00
2.00
cad
1.50
chrome 1.80
park
2.00
cad
2.00
chrome 2.75
park
2.00
chrome 3.00
park
4.75
cad
4.75
park
2.00
zinc
3.50
park
2.00
cad
2.00
chrome 2.75
prices
in euro
€
Screws, Bolts, Nuts
Nuts (continued)
Nuts (continued)
R2634-36 1/2-20 x 3/4 acorn nut
R2634-36C 1/2-20 x 3/4 acorn nut
R2643-31 1/2-20 x 5/16" x 13/16" 'm'
R2643-31cad 1/2-20 x 5/16" x 13/16" 'm'
R6032-36P 1/2-20 x 7/16" x 7/8"
'm'
7914
1/2-20 x 7/16" x 7/8"
7907
1/2-20 x 7/16" x 7/8"
'm'
R4178-42P 1/2-20 x 7/8" castle nut
R4178-42 1/2-20 x 7/8" castle nut
R4178-42C 1/2-20 x 7/8" castle nut
R7926
1/2-20 x 9/32" x 1-3/16" 'm'
R6036-36BP 9/16-18 x 11/32" x 15/16" 'm'
R6036-36B 9/16-18 x 11/32" x 15/16" 'm'
R3996-36P 5/8-18 x 7/16" x 7/8"
'm'
R3996-36 5/8-18 x 7/16" x 7/8"
'm'
R3996-36C 5/8-18 x 7/16" x 7/8"
'm'
R7974P
5/8-18 x 7/32" x 15/16" 'm'
R7974
5/8-18 x 7/32" x 15/16" 'm'
364-29
5/8-18 x 7/32" x 15/16" 'm'
R364-29
5/8-18 x 7/32" x 15/16" 'm'
R2274-36 5/8-18 x 7/32" x 1"
'm'
park
chrome
park
cad
park
zinc
bare
park
cad
chrome
park
cad
park
cad
chrome
park
cad
4.00
4.50
1.70
1.75
1.80
4.00
3.00
5.00
6.00
7.50
6.00
2.50
2.65
2.50
2.70
4.00
2.50
2.50
8.00
6.50
3.25
Washers
2050-12
0142
R2050-30
364-37
R8011
3929-44
R3929-44P
R3929-44
R3929-44C
R8025
2932-14
R364-36
R365-15
R4005-35P
R4005-35
R4005-35C
R4184-30P
R4184-30
R4184-30C
5/8-18 x 5/16" x 1-1/16" 'm'
5/8 -24 x 7/32" x 7/8"
'm'
11/16-18 x 1" special
11/16-18 x 7/32" x 1-1/16"
11/16-18 x 7/32" x 1-3/16"
11/16-24 x 15/16" special
11/16-24 x 15/16" special
11/16-24 x 15/16" special
11/16-24 x 15/16" special
3/4-16 x 11/16" x 1-1/16"
3/4-18 x 7/16" x 1-1/16"
3/4-18 x 9/32" x 1-3/16"
13/16-18 x 1/4" x 1-3/16"
13/16-24 x 19/64" x 1-3/16"
13/16-24 x 19/64" x 1-3/16"
13/16-24 x 19/64" x 1-3/16"
13/16-24 x 3/8" x 1-3/16"
13/16-24 x 3/8" x 1-3/16"
13/16-24 x 3/8" x 1-3/16"
park
park
'm' park
'm'
'm'
'm' park
'm' park
'm' cad
'm' chrome
'm'
'm' park
'm'
'm'
'm' park
'm' cad
'm' chrome
'm' park
'm' cad
'm' chrome
7.00
3.50
10.00
4.00
5.50
6.00
7.00
7.00
9.00
8.75
6.00
8.50
9.00
11.00
11.00
12.75
6.00
6.50
8.00
park
cad
chrome
Nickle
park
park
cad
chrome
park
cad
chrome
park
cad
chrome
park
park
brass
park
park
zinc
park
cad
chrome
park
cad
chrome
park
park
cad
chrome
0.50
0.50
0.70
0.70
0.50
0.90
0.90
1.10
0.90
0.90
1.20
1.00
1.10
2.50
0.60
0.60
0.50
2.50
1.50
0.40
0.60
0.60
0.85
0.70
1.00
1.00
2.00
0.85
0.85
1.00
0.60
1.00
2.25
0.80
0.80
2.00
1.00
1.10
1.40
0.95
Washers (continued)
Listed by size:
R6189W
R0202A
R0201P
R0201
R0201A
R0205P
0207
R6099
R6099C
1417-42
R0208AP
R0207B
R0208P
R0208Z
R0208C
R0208NI
R0211
R0213P
R0213NI
R0212P
R0212
R0212C
R6316WP
R6316W
R6316WC
R0214P
R0214
R0214C
6327B
R6327B
R0215P
R0212AP
R2788-30
R6377
R0226P
R0224AP
5/32" x 25/64"x .032"
3/16" x 21/64" x 1/64"
3/16" x 7/16" x 1/32"
3/16" x 7/16" x 1/32"
13/64" x 3/8" x 1/32"
7/32" x 1/2" x 1/16"
1/4" x 7/16" x 1/32"
1/4" x 7/16" x 1/16"
1/4" x 7/16" x 1/16"
1/4" x 1/2" x 1/16"
1/4" x 9/16" x 1/16"
1/4" x 9/16" x 1/32"
1/4" x 5/8" x 1/16"
1/4" x 5/8" x 1/16"
1/4" x 5/8" x 1/16"
1/4" x 5/8" x 1/16"
9/32" x 15/32" x 1/32"
5/16" x 1/2" x 3/32"
5/16" x 1/2" x 3/32"
5/16" x 9/16" x 1/32"
5/16" x 9/16" x 1/32"
5/16" x 9/16" x 1/32"
5/16" x 5/8" x 1/16"
5/16" x 5/8" x 1/16"
5/16" x 5/8" x 1/16"
5/16" x 11/16" x 1/16"
5/16" x 11/16" x 1/16"
5/16" x 11/16" x 1/16"
5/16" x 3/4" x 1/16"
5/16" x 3/4" x 1/16"
5/16" x 15/16" x 1/16"
21/64" x 15/16" x 3/16"
3/8" x 9/16" x 1/16"
3/8" x 5/8" x 1/32"
3/8" x 5/8" x 3/64"
3/8" x 23/32" x 1/16"
brass
zinc
park
zinc
brass
park
park
zinc
chrome
park
zinc
park
zinc
chrome
Nickle
park
Nickle
park
stainless
chrome
park
cad/zinc
chrome
park
cad
Nickle
park
zinc
park
park
park
brass
park
park
0.35
0.40
0.25
0.30
0.50
0.30
1.00
0.40
0.35
0.80
0.30
0.30
0.30
0.30
0.40
0.50
0.50
0.40
0.50
0.40
0.30
0.45
0.25
0.30
0.50
0.40
0.40
0.40
1.00
0.30
0.50
0.90
1.00
0.50
0.50
0.50
R0224P
3/8" x 13/16" x 1/16"
R0224
3/8" x 13/16" x 1/16"
R0224C
3/8" x 13/16" x 1/16"
R0224NI 3/8" x 13/16" x 1/16"
R0225P
3/8" x 13/16" x 7/64"
R0223AP
3/8" x 7/8" x 1/8"
R0223A
3/8" x 7/8" x 1/8"
R0223AC
3/8" x 7/8" x 1/8"
R0223P
3/8" x 1" x 1/8"
R0223
3/8" x 1" x 1/8"
R0223C
3/8" x 1" x 1/8"
R13457-40P
3/8" x 1-1/8" x 1/8"
R13457-40cad 3/8" x 1-1/8" x 1/8"
R13457-40C
3/8" x 1-1/8" x 1/8"
R0227AP
25/64" x 13/16" x 1/8"
3572-36C
13/32" x 5/8" x 13/32"
R3572-36C
13/32" x 5/8" x 13/32"
2952-35
13/32" x 11/16" x 1/4"
0228
7/16" x 21/32" x 1/16"
R2242-36B
7/16" x 3/4" x 1/64"
R15-36P
7/16" x 3/4" x 1/8"
R15-36
7/16" x 3/4" x 1/8"
R15-36C
7/16" x 3/4" x 1/8"
R0232P
7/16" x 13/16" x 3/32"
0232
7/16" x 13/16" x 3/32"
R0232C
7/16" x 13/16" x 3/32"
0230
7/16" x 15/16" x 1/8"
R0230P
7/16" x 15/16" x 1/8"
R0230
7/16" x 15/16" x 1/8"
R0230C
7/16" x 15/16" x 1/8"
R0234
29/64" x 1-1/8" x .015"
R0231P
29/64" x 1-1/8" x 3/32"
0231W
29/64" x 1-1/8" x 3/32"
R1643-29
15/32" x 3/4" x .033"
R1643-29S
15/32" x 3/4" x .070"
1643-30
15/32" x 3/4" x .072"
R13458-36P
1/2" x 1-1/8" x 3/32"
R13458-36cad 1/2" x 1-1/8" x 3/32"
R13458-36C
1/2" x 1-1/8" x 3/32"
R6581
17/32" x 15/16" x .025"
www.jwboon.com
park
cad
park
park
cad
chrome
brass
45
€
prices
in euro
Screws, Bolts, Nuts
Lockwashers
Special Lockwashers
Listed by size:
Listed by size:
R0250
No. 4 x 17/64" x 1/32"
zinc
R0251
No. 6 x 15/64" x 1/32"
zinc
R0252P
No. 8 x 5/32" x 1/32"
park
R0252
No. 8 x 5/32" x 1/32"
zinc
R0252C
No. 8 x 5/32" x 1/32"
chrome
R0254P
No.10 x 21/64" x 3/64"
park
R0254
No.10 x 21/64" x 3/64"
zinc
R0254C
No.10 x 21/64" x 3/64"
chrome
0253
3/16" x 3/8" x 3/64"
park
R0255P
No.12 x 11/32" x 3/64"
park
R0255
No.12 x 11/32" x 3/64"
zinc
0255A
7/32" x 15/32" x 3/64"
park
R0256P
1/4" x 1/2" x 1/16"
park
R0256
1/4" x 1/2" x 1/16"
zinc
R0256C
1/4" x 1/2" x 1/16"
chrome
R0259P
5/16" x 9/16" x 1/16"
park
R0259
5/16" x 9/16" x 1/16"
zinc
R0259C
5/16" x 9/16" x 1/16"
chrome
R0261P
3/8" x 5/8" x 1/16"
park
R0261
3/8" x 5/8" x 1/16"
zinc
R0261C
3/8" x 5/8" x 1/16"
chrome
R0265P
7/16" x 11/16" x 3/32"
park
R0265
7/16" x 11/16" x 3/32"
zinc
R0265C
7/16" x 11/16" x 3/32"
chrome
R0265AP
7/16" x 3/4" x 3/32"
park
R0265A
7/16" x 3/4" x 3/32"
zinc
R0265AC
7/16" x 3/4" x 3/32"
chrome
R0266P
7/16" x 3/4" x 1/8"
park
R0266
7/16" x 3/4" x 1/8"
cad
R0266C
7/16" x 3/4" x 1/8"
chrome
0266
7/16" x 13/16" x 3/32"
park
R0269P
9/16" x 15/16" x 3/32"
park
R0269
9/16" x 15/16" x 3/32"
zinc
R7043
3/4" x 1-1/4" x 3/16"
zinc
0253, 0255A, 0266 are special lockwashers (larger o.d.)
0.20
0.20
0.20
0.20
0.30
0.20
0.20
0.30
0.25
0.20
0.20
n.a.
0.20
0.20
0.30
0.20
0.20
0.30
0.20
0.20
0.30
0.55
0.60
0.75
0.85
0.55
0.55
0.75
0.75
0.85
n.a.
0.85
0.30
0.50
Steel Balls
R1297-26
R0279
R2472-41B
R0280
R0282
R704-36
R0283
R2251-36
46
No. 4
No. 6
No. 8
No. 8
No. 8
No.10
No.10
No.12
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
5/16"
5/16"
5/16"
5/16"
5/16"
3/8"
3/8"
3/8"
3/8"
7/16"
1/2"
1/2"
5/8"
3/4"
3/4"
external tooth
internal tooth
external tooth
internal tooth
external-internal
external tooth
internal tooth
internal tooth
internal tooth
external tooth
external tooth
external-internal
countersunk
countersunk
internal tooth
external tooth
countersunk
countersunk
high collar
internal tooth
external tooth
countersunk
high collar
internal tooth
internal tooth
external tooth
external tooth
internal tooth
external tooth
zinc
zinc
zinc
zinc
zinc
zinc
zinc
zinc
zinc
park
zinc
zinc
park
zinc
zinc
zinc
park
zinc
zinc
zinc
zinc
zinc
zinc
zinc
zinc
zinc
zinc
zinc
zinc
0.20
0.20
0.30
0.20
0.25
0.20
0.20
0.20
0.20
0.30
0.20
0.35
0.30
0.25
0.20
0.20
0.40
0.30
0.30
0.20
0.25
0.35
0.30
0.20
0.25
0.25
0.30
0.30
0.30
Nickle
zinc
chrome
park
cad
zinc
3.00
1.90
2.00
1.90
3.00
2.00
zinc
park
zinc
zinc
zinc
park
zinc
zinc
park
zinc
zinc
zinc
zinc
zinc
zinc
0.20
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.25
0.15
0.20
0.25
0.25
Grease Fittings
5/32" steel ball
3/16" steel ball
7/32" steel ball
1/4" steel ball
5/16" steel ball
3/8" steel ball
3/8" stainless steel ball
1/2" steel ball
0.35
0.20
0.15
0.20
0.20
0.40
0.70
1.00
Rivets
1647-31A
4046-31
R4033-35
2485-41A
R2485-41
2485-40
0306
R0308
0314
0318
0319
R7206W
R0351
R7143
R0352
R0353
R0354
R0356
R7121
R0359
R0363P
R0363
R7229W
R0365P
R0365
R0360
R7232
R0370P
R0370
R7042
R0374
R7145W
R6027W
R7045
R0362
R7129
R0390
R7242
R7142
R7144
R0340
R0344
R0344C
R0344P
0345
R0347
Alemite fitting
Grease nipple
Grease nipple
Grease nipple
Grease nipple
Grease nipple
´24-´37
straight
straight
straight
67.5° angle
90° angle
Cotter Pins
1/8" x 9/32"
9/64" x 9/32"
5/32" x 1/2"
3/16" x 7/32"
3/16" x 9/32"
3/16" x 3/8"
3/16" x 5/16"
3/16" x 9/16"
3/16" x 3/8"
1/4" x 9/16"
1/4" x 3/4"
brass
brass
steel
brass
brass
brass
steel
steel
steel
steel
steel
tubular
tubular
round head
countersunk
countersunk
countersunk
round head
round head
truss head
round head
round head
0.50
0.30
0.25
0.20
0.20
0.20
0.50
0.35
1.00
n.a.
n.a.
R551
R0290P
R0290
R0296
R0297
R0291P
R0291
R0298
R0292P
R0292
R513
R0293
R0294
R511
R0295
3/64" x 9/16"
1/16" x 1/2"
1/16" x 1/2"
1/16" x 5/8"
1/16" x 3/4"
3/32" x 5/8"
3/32" x 5/8"
3/32" x 7/8"
3/32" x 1"
3/32" x 1"
3/32" x 1-15/16"
1/8" x 5/8"
1/8" x 1-1/4"
9/64" x 1-1/4"
3/16" x 1"
Jan Willem Boon, The Netherlands
prices
in euro
€
Standard Hardware
Round head machine screw, zinc
Flat head machine screw, zinc
Flat head sheet metal screws, zinc
H01044005
H01044007
H01044010
H01044012
H01044015
H01054005
H01054010
H01063205
H01063207
H01063210
H01063212
H01063215
H01063220
H01063225
H01063230
H01083205
H01083207
H01083210
H01083212
H01083215
H01083217
H01083220
H01083225
H01083230
H01102407
H01102410
H01102412
H01102415
H01102420
H01102425
H01102430
H01102435
H01102440
H01103207
H01103210
H01103212
H01103215
H01103220
H01103225
H01103230
H01103235
H01103240
H01122407
H01122410
H01122412
H01122415
H01122420
H02044007
H02044010
H02044012
H02044015
H02063207
H02063210
H02063212
H02063215
H02063220
H02083207
H02083210
H02083212
H02083215
H02083220
H02102410
H02102412
H02102415
H02102420
H02102425
H02103210
H02103212
H02103215
H02103220
H02103225
H03040007
H03040010
H03040012
H03060007
H03060010
H03060012
H03060015
H03060020
H03080007
H03080010
H03080012
H03080015
H03080020
H03100010
H03100015
H03100020
H03100025
H03120010
H03120015
H03120020
H03140010
H03140015
H03140020
4 x 3/8"
4 x 1/2"
4 x 5/8"
6 x 3/8"
6 x 1/2"
6 x 5/8"
6 x 3/4"
6 x 1"
8 x 3/8"
8 x 1/2"
8 x 5/8"
8 x 3/4"
8 x 1"
10 x 1/2"
10 x 3/4"
10 x 1"
10 x 1 1/4"
12 x 1/2"
12 x 3/4"
12 x 1"
14 x 1/2"
14 x 3/4"
14 x 1"
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
H06162440
H06162445
H06181615
H06181620
H06181625
H06181630
H06181635
H06181640
H06182415
H06182420
H06182425
H06182430
H06182435
H06182440
5/16-24 x 2"
5/16-24 x 2-1/4"
3/8-16 x 3/4"
3/8-16 x 1"
3/8-16 x 1-1/4"
3/8-16 x 1-1/2"
3/8-16 x 1-3/4"
3/8-16 x 2"
3/8-24 x 3/4"
3/8-24 x 1"
3/8-24 x 1-1/4"
3/8-24 x 1-1/2"
3/8-24 x 1-3/4"
3/8-24 x 2"
1.70
1.70
1.50
1.50
1.70
1.70
1.70
1.70
1.50
1.50
1.70
1.70
1.70
1.70
4-40 x 1/4"
4-40 x 3/8"
4-40 x 1/2"
4-40 x 5/8"
4-40 x 3/4"
5-40 x 1/4"
5-40 x 1/2"
6-32 x 1/4"
6-32 x 3/8"
6-32 x 1/2"
6-32 x 5/8"
6-32 x 3/4"
6-32 x 1"
6-32 x 1 1/4"
6-32 x 1 1/2"
8-32 x 1/4"
8-32 x 3/8"
8-32 x 1/2"
8-32 x 5/8"
8-32 x 3/4"
8-32 x 7/8"
8-32 x 1"
8-32 x 1 1/4"
8-32 x 1 1/2"
10-24 x 3/8"
10-24 x 1/2"
10-24 x 5/8"
10-24 x 3/4"
10-24 x 1"
10-24 x 1 1/4"
10-24 x 1 1/2"
10-24 x 1 3/4"
10-24 x 2"
10-32 x 3/8"
10-32 x 1/2"
10-32 x 5/8"
10-32 x 3/4"
10-32 x 1"
10-32 x 1 1/4"
10-32 x 1 1/2"
10-32 x 1 3/4"
10-32 x 2"
12-24 x 3/8"
12-24 x 1/2"
12-24 x 5/8"
12-24 x 3/4"
12-24 x 1"
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.50
0.50
0.50
0.30
0.30
0.30
0.30
0.50
0.50
0.50
0.50
0.50
0.30
0.30
0.30
0.30
0.50
0.50
0.50
0.50
0.50
0.30
0.30
0.30
0.30
0.50
4-40 x 3/8"
4-40 x 1/2"
4-40 x 5/8"
4-40 x 3/4"
6-32 x 3/8"
6-32 x 1/2"
6-32 x 5/8"
6-32 x 3/4"
6-32 x 1"
8-32 x 3/8"
8-32 x 1/2"
8-32 x 5/8"
8-32 x 3/4"
8-32 x 1"
10-24 x 1/2"
10-24 x 5/8"
10-24 x 3/4"
10-24 x 1"
10-24 x 1 1/4"
10-32 x 1/2"
10-32 x 5/8"
10-32 x 3/4"
10-32 x 1"
10-32 x 1 1/4"
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
Pan head sheet metal screws, zinc
H04040007
H04040010
H04040012
H04060007
H04060010
H04060012
H04060015
H04060020
H04080007
H04080010
H04080012
H04080015
H04080020
H04100010
H04100012
H04100015
H04100020
H04100025
H04120010
H04120015
H04120020
H04140010
H04140015
H04140020
4 x 3/8"
4 x 1/2"
4 x 5/8"
6 x 3/8"
6 x 1/2"
6 x 5/8"
6 x 3/4"
6 x 1"
8 x 3/8"
8 x 1/2"
8 x 5/8"
8 x 3/4"
8 x 1"
10 x 1/2"
10 x 5/8"
10 x 3/4"
10 x 1"
10 x 1 1/4"
12 x 1/2"
12 x 3/4"
12 x 1"
14 x 1/2"
14 x 3/4"
14 x 1"
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
H06142845
H06161812
H06161815
H06161817
H06161820
H06161825
H06161830
H06161835
H06161840
H06161845
H06162412
H06162415
H06162417
H06162420
H06162425
H06162430
H06162435
1/4-28 x 2-1/4"
5/16-18 x 5/8"
5/16-18 x 3/4"
5/16-18 x 7/8"
5/16-18 x 1"
5/16-18 x 1-1/4"
5/16-18 x 1-1/2"
5/16-18 x 1-3/4"
5/16-18 x 2"
5/16-18 x 2-1/4"
5/16-24 x 5/8"
5/16-24 x 3/4"
5/16-24 x 7/8"
5/16-24 x 1"
5/16-24 x 1-1/4"
5/16-24 x 1-1/2"
5/16-24 x 1-3/4"
1.70
1.50
1.50
1.50
1.50
1.70
1.70
1.70
1.70
1.70
1.50
1.50
1.50
1.50
1.70
1.70
1.70
Hex head bolt, stainless steel
H06142012
H06142015
H06142017
H06142020
H06142025
H06142030
H06142035
H06142040
H06142045
H06142812
H06142815
H06142817
H06142820
H06142825
H06142830
H06142835
H06142840
1/4-20 x 5/8"
1/4-20 x 3/4"
1/4-20 x 7/8"
1/4-20 x 1"
1/4-20 x 1-1/4"
1/4-20 x 1-1/2"
1/4-20 x 1-3/4"
1/4-20 x 2"
1/4-20 x 2-1/4"
1/4-28 x 5/8"
1/4-28 x 3/4"
1/4-28 x 7/8"
1/4-28 x 1"
1/4-28 x 1-1/4"
1/4-28 x 1-1/2"
1/4-28 x 1-3/4"
1/4-28 x 2"
1.50
1.50
1.50
1.50
1.70
1.70
1.70
1.70
1.70
1.50
1.50
1.50
1.50
1.70
1.70
1.70
1.70
www.jwboon.com
47
€
prices
in euro
Standard Hardware
Hex head bolt, zinc
H07142010
H07142012
H07142015
H07142017
H07142020
H07142025
H07142030
H07142035
H07142040
H07142045
H07142050
H07142055
H07142810
H07142812
H07142815
H07142817
H07142820
H07142825
H07142830
H07142835
H07142840
H07142845
H07142850
H07142855
H07161812
H07161815
H07161817
H07161820
H07161825
H07161830
H07161835
H07161840
H07161845
H07161850
H07161855
H07161860
H07162410
H07162412
H07162415
1/4-20 x 1/2"
1/4-20 x 5/8"
1/4-20 x 3/4"
1/4-20 x 7/8"
1/4-20 x 1"
1/4-20 x 1-1/4"
1/4-20 x 1-1/2"
1/4-20 x 1-3/4"
1/4-20 x 2"
1/4-20 x 2-1/4"
1/4-20 x 2-1/2"
1/4-20 x 2-3/4"
1/4-28 x 1/2"
1/4-28 x 5/8"
1/4-28 x 3/4"
1/4-28 x 7/8"
1/4-28 x 1"
1/4-28 x 1-1/4"
1/4-28 x 1-1/2"
1/4-28 x 1-3/4"
1/4-28 x 2"
1/4-28 x 2-1/4"
1/4-28 x 2-1/2"
1/4-28 x 2-3/4"
5/16-18 x 5/8"
5/16-18 x 3/4"
5/16-18 x 7/8"
5/16-18 x 1"
5/16-18 x 1-1/4"
5/16-18 x 1-1/2"
5/16-18 x 1-3/4"
5/16-18 x 2"
5/16-18 x 2-1/4"
5/16-18 x 2-1/2"
5/16-18 x 2-3/4"
5/16-18 x 3"
5/16-24 x 1/2"
5/16-24 x 5/8"
5/16-24 x 3/4"
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.70
0.70
0.70
0.70
0.70
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.70
0.70
0.70
0.70
0.70
0.50
0.50
0.50
0.50
0.50
0.50
0.70
0.70
0.70
0.70
0.70
0.70
0.50
0.50
0.50
H07162417
H07162420
H07162425
H07162430
H07162435
H07162440
H07162445
H07162450
H07162455
H07181610
H07181612
H07181615
H07181617
H07181620
H07181625
H07181630
H07181635
H07181640
H07181645
H07181650
H07181655
H07181660
H07181665
H07181670
H07181675
H07182410
H07182412
H07182415
H07182417
H07182420
H07182425
H07182430
H07182435
H07182440
H07182445
H07182450
H07182455
H07182460
H07182465
5/16-24 x 7/8"
5/16-24 x 1"
5/16-24 x 1-1/4"
5/16-24 x 1-1/2"
5/16-24 x 1-3/4"
5/16-24 x 2"
5/16-24 x 2-1/4"
5/16-24 x 2-1/2"
5/16-24 x 2-3/4"
3/8-16 x 1/2"
3/8-16 x 5/8"
3/8-16 x 3/4"
3/8-16 x 7/8"
3/8-16 x 1"
3/8-16 x 1-1/4"
3/8-16 x 1-1/2"
3/8-16 x 1-3/4"
3/8-16 x 2"
3/8-16 x 2-1/4"
3/8-16 x 2-1/2"
3/8-16 x 2-3/4"
3/8-16 x 3"
3/8-16 x 3-1/4"
3/8-16 x 3-1/2"
3/8-16 x 3-3/4"
3/8-24 x 1/2"
3/8-24 x 5/8"
3/8-24 x 3/4"
3/8-24 x 7/8"
3/8-24 x 1"
3/8-24 x 1-1/4"
3/8-24 x 1-1/2"
3/8-24 x 1-3/4"
3/8-24 x 2"
3/8-24 x 2-1/4"
3/8-24 x 2-1/2"
3/8-24 x 2-3/4"
3/8-24 x 3"
3/8-24 x 3-1/4"
0.50
0.50
0.50
0.50
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.70
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.70
0.70
0.70
0.70
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
H07182470
H07182475
H07201415
H07201420
H07201425
H07201430
H07201435
H07201440
H07201445
H07201450
H07201455
H07202015
H07202020
H07202025
H07202030
H07202035
H07202040
H07202045
H07202050
H07202055
H07202060
H07221315
H07221320
H07221325
H07221330
H07221335
H07221340
H07221345
H07221350
H07221355
H07221360
H07221365
H07222020
H07222025
H07222030
H07222035
H07222040
H07222045
H07222050
H07222055
H07222060
3/8-24 x 3-1/2"
3/8-24 x 3-3/4"
7/16-14 x 3/4"
7/16-14 x 1"
7/16-14 x 1-1/4"
7/16-14 x 1-1/2"
7/16-14 x 1-3/4"
7/16-14 x 2"
7/16-14 x 2-1/4"
7/16-14 x 2-1/2"
7/16-14 x 2-3/4"
7/16-20 x 3/4"
7/16-20 x 1"
7/16-20 x 1-1/4"
7/16-20 x 1-1/2"
7/16-20 x 1-3/4"
7/16-20 x 2"
7/16-20 x 2-1/4"
7/16-20 x 2-1/2"
7/16-20 x 2-3/4"
7/16-20 x 3"
1/2-13 x 3/4"
1/2-13 x 1"
1/2-13 x 1-1/4"
1/2-13 x 1-1/2"
1/2-13 x 1-3/4"
1/2-13 x 2"
1/2-13 x 2-1/4"
1/2-13 x 2-1/2"
1/2-13 x 2-3/4"
1/2-13 x 3"
1/2-13 x 3-1/4"
1/2-20 x 1"
1/2-20 x 1-1/4"
1/2-20 x 1-1/2"
1/2-20 x 1-3/4"
1/2-20 x 2"
1/2 -20 x 2 1/4"
1/2 -20 x 2 1/2"
1/2 -20 x 2 3/4"
1/2 -20 x 3"
0.80
0.80
1.30
1.30
1.30
1.30
1.60
1.60
1.60
1.60
1.60
1.30
1.30
1.30
1.30
1.60
1.60
1.60
1.60
1.60
1.60
1.30
1.30
1.30
1.30
1.60
1.60
1.60
1.60
1.60
1.60
1.60
1.30
1.30
1.30
1.60
1.60
1.60
1.60
1.60
1.60
H05161845
H05162410
H05162412
H05162415
H05162417
H05162420
H05162425
H05162430
H05162435
H05162440
H05162445
H05181615
H05181620
H05181625
H05181630
H05181635
H05181640
H05182415
H05182420
H05182425
H05182430
H05182435
H05182440
H05201420
H05201425
5/16-18 x 2 1/4"
5/16-24 x 1/2"
5/16-24 x 5/8"
5/16-24 x 3/4"
5/16-24 x 7/8"
5/16-24 x 1"
5/16-24 x 1-1/4"
5/16-24 x 1-1/2"
5/16-24 x 1-3/4"
5/16-24 x 2"
5/16-24 x 2-1/4"
3/8-16 x 3/4"
3/8-16 x 1"
3/8-16 x 1-1/4"
3/8-16 x 1-1/2"
3/8-16 x 1-3/4"
3/8-16 x 2"
3/8-24 x 3/4"
3/8-24 x 1"
3/8-24 x 1-1/4"
3/8-24 x 1-1/2"
3/8-24 x 1-3/4"
3/8-24 x 2"
7/16-14 x 1"
7/16-14 x 1-1/4"
2.00
1.70
1.70
1.70
1.70
1.70
2.00
2.00
2.00
2.00
2.00
1.70
1.70
2.00
2.00
2.00
2.00
1.70
1.70
2.00
2.00
2.00
2.00
2.00
2.00
H05201430
H05201435
H05201440
H05202020
H05202025
H05202030
H05202035
H05202040
H05221315
H05221325
H05221330
H05221340
H05221345
H05221350
H05221355
H05222020
H05222030
H05222035
H05222040
H05222045
H05222050
H05222055
7/16-14 x 1-1/2"
7/16-14 x 1-3/4"
7/16-14 x 2"
7/16-20 x 1"
7/16-20 x 1-1/4"
7/16-20 x 1-1/2"
7/16-20 x 1-3/4"
7/16-20 x 2"
1/2-13 x 3/4"
1/2-13 x 1-1/4"
1/2-13 x 1-1/2"
1/2-13 x 2"
1/2-13 x 2-1/4"
1/2-13 x 2-1/2"
1/2-13 x 2-3/4"
1/2-20 x 1"
1/2-20 x 1-1/2"
1/2-20 x 1-3/4"
1/2-20 x 2"
1/2-20 x 2-1/4"
1/2-20 x 2-1/2"
1/2-20 x 2-3/4"
2.20
2.20
2.20
2.00
2.00
2.20
2.20
2.20
2.00
2.00
2.20
2.20
2.20
2.20
2.20
2.00
2.20
2.20
2.20
2.20
2.20
2.20
Hex head bolt, chrome plated
H05142012
H05142015
H05142017
H05142020
H05142025
H05142030
H05142035
H05142040
H05142045
H05142812
H05142815
H05142817
H05142820
H05142825
H05142830
H05142835
H05142840
H05142845
H05161812
H05161815
H05161817
H05161820
H05161825
H05161830
H05161835
H05161840
48
1/4-20 x 5/8"
1/4-20 x 3/4"
1/4-20 x 7/8"
1/4-20 x 1"
1/4-20 x 1-1/4"
1/4-20 x 1-1/2"
1/4-20 x 1-3/4"
1/4-20 x 2"
1/4-20 x 2-1/4"
1/4-28 x 5/8"
1/4-28 x 3/4"
1/4-28 x 7/8"
1/4-28 x 1"
1/4-28 x 1-1/4"
1/4-28 x 1-1/2"
1/4-28 x 1-3/4"
1/4-28 x 2"
1/4-28 x 2-1/4"
5/16-18 x 5/8"
5/16-18 x 3/4"
5/16-18 x 7/8"
5/16-18 x 1"
5/16-18 x 1-1/4"
5/16-18 x 1-1/2"
5/16-18 x 1-3/4"
5/16-18 x 2"
1.70
1.70
1.70
1.70
2.00
2.00
2.00
2.00
2.00
1.70
1.70
1.70
1.70
2.00
2.00
2.00
2.00
2.00
1.70
1.70
1.70
1.70
2.00
2.00
2.00
2.00
www.jwboon.com
prices
in euro
€
Standard Hardware
Hex nut, zinc
H20044005
H20063206
H20083206
H20102407
H20103207
H20122408
H20142008
H20142808
H20161810
H20162410
H20181611
H20182411
H20201414
H20202014
H20221315
H20222015
H20261118
H20261818
H20301022
H20301622
Hex nuts, chrome
4-40 x 1/4"
6-32 x 5/16"
8-32 x 11/32"
10-24 x 3/8"
10-32 x 3/8"
12-24 x 7/16"
1/4-20 x 7/16"
1/4-28 x 7/16"
5/16-18 x 1/2"
5/16-24 x 1/2"
3/8-16 x 9/16"
3/8-24 x 9/16"
7/16-14 x 11/16"
7/16-20 x 11/16"
1/2-13 x 3/4"
1/2-20 x 3/4"
5/8-11 x 15/16"
5/8-18 x 15/16"
3/4-10 x 1 1/8"
3/4-16 x 1 1/8"
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
Nylock nuts, zinc
H22044005
H22063206
H22083206
H22102407
H22103207
H22122408
H22142008
H22142808
H22161810
H22162410
H22181611
H22182411
H22201412
H22202012
H22221315
H22222015
H22261118
H22261818
H22301021
H22301621
4-40 x 1/4"
6-32 x 5/16"
8-32 x 11/32"
10-24 x 3/8"
10-32 x 3/8"
12-24 x 7/16"
1/4-20 x 7/16"
1/4-28 x 7/16"
5/16-18 x 1/2"
5/16-24 x 1/2"
3/8-16 x 9/16"
3/8-24 x 9/16"
7/16-14 x 5/8"
7/16-20 x 5/8"
1/2-13 x 3/4"
1/2-20 x 3/4"
5/8-11 x 15/16"
5/8-18 x 15/16"
3/4-10 x 1 1/16"
3/4-16 x 1 1/16"
10-24 x 3/8"
10-32 x 3/8"
1/4-20 x 7/16"
1/4-24 x 7/16"
1/4-28 x 7/16"
5/16-18 x 1/2"
5/16-24 x 1/2"
3/8-16 x 9/16"
3/8-24 x 9/16"
7/16-14 x 11/16"
7/16-20 x 11/16"
1/2-13 x 3/4"
1/2-20 x 3/4"
9/16-12 x 7/8"
9/16-18 x 7/8"
5/8-11 x 15/16"
5/8-11 x 1 1/4"
5/8-18 x 15/16"
5/8-18 x 1 1/4"
3/4-16 x 1 1/8"
1/4-20 x 7/16"
1/4-28 x 7/16"
5/16-18 x 1/2"
5/16-24 x 1/2"
3/8-16 x 9/16"
3/8-24 x 9/16"
7/16-14 x 5/8"
7/16-20 x 5/8"
1/2-20 x 3/4"
5/8-18 x 15/16"
Hex nuts, stainless steel
0.60
0.60
0.70
0.70
0.80
0.80
0.80
0.80
1.00
1.20
H21063206
H21083206
H21102407
H21103207
H21142008
H21142808
H21161810
H21162410
H21181611
H21182411
H21202014
H21222015
H21261818
6-32 x 5/16"
8-32 x 11/32"
10-24 x 3/8"
10-32 x 3/8"
1/4-20 x 7/16"
1/4-28 x 7/16"
5/16-18 x 1/2"
5/16-24 x 1/2"
3/8-16 x 9/16"
3/8-24 x 9/16"
7/16-20 x 11/16"
1/2-20 x 3/4"
5/8-18 x 15/16"
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.60
0.60
0.60
1.00
2.00
Nylock nuts, chrome
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.40
Acorn nuts, chrome
H25102407
H25103207
H25142008
H25142408
H25142808
H25161810
H25162410
H25181611
H25182411
H25201414
H25202014
H25221315
H25222015
H25241217
H25241817
H25261118
H25261125
H25261818
H25261825
H25301622
H24142008
H24142808
H24161810
H24162410
H24181611
H24182411
H24201412
H24202012
H24222015
H24261818
H23102407
H23103207
H23142008
H23142808
H23161810
H23162410
H23181611
H23182411
H23201412
H23202012
H23222015
H23261818
10 -24 x 3/8"
10 -32 x 3/8"
1/4 -20 x 7/16"
1/4 -28 x 7/16"
5/16-18 x 1/2"
5/16-24 x 1/2"
3/8 -16 x 9/16"
3/8 -24 x 9/16"
7/16-14 x 5/8"
7/16-20 x 5/8"
1/2 -20 x 3/4"
5/8 -18 x 15/16"
0.70
0.70
0.80
0.70
0.80
0.80
0.90
0.90
0.90
0.90
1.00
1.10
Cap nuts, chrome
1.30
1.30
1.50
1.50
1.30
1.50
1.50
1.60
1.60
2.00
2.00
3.00
3.00
3.20
3.20
4.50
6.50
5.50
7.70
6.20
H26102407
H26103207
H26142008
H26142408
H26142808
H26161810
H26162410
H26181611
H26182411
H26201414
H26202014
H26221315
H26222015
H26241217
H26241817
H26261118
H26261818
10-24 x 3/8"
10-32 x 3/8"
1/4-20 x 7/16"
1/4-24 x 7/16"
1/4-28 x 7/16"
5/16-18 x 1/2"
5/16-24 x 1/2"
3/8-16 x 9/16"
3/8-24 x 9/16"
7/16-14 x 11/16"
7/16-20 x 11/16"
1/2-13 x 3/4"
1/2-20 x 3/4"
9/16-12 x 7/8"
9/16-18 x 7/8"
5/8-11 x 15/16"
5/8-18 x 15/16"
1.50
1.50
1.50
1.50
1.30
1.50
1.50
1.70
1.70
2.00
2.00
3.00
3.00
3.20
3.20
4.50
4.50
49
€
prices
in euro
Standard Hardware
Standard flatwasher, zinc
H40042002
H40062403
H40082804
H40103203
H40123604
H40144004
H40164404
H40185204
H40206005
H40226805
4 x 5/16" x 1/32"
6 x 3/8" x 3/64"
8 x 7/16" x 1/16
10 x 1/2" x 3/64"
12 x 9/16" x 1/16"
1/4" x 5/8" x 1/16"
5/16" x 11/16" x 1/16"
3/8" x 13/16" x 1/16"
7/16" x 15/16" x 5/64"
1/2" x 1-1/16" x 5/64"
Standard flatwasher, chrome
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
Standard lockwasher, zinc
H50041202
H50061602
H50081803
H50102103
H50122404
H50143104
H50163605
H50184307
H50204908
H50225509
H50246008
H50266710
H50308012
4 x 3/16" x 1/32"
6 x 1/4" x 1/32"
8 x 9/32" x 3/64"
10 x 21/64" x 3/64"
12 x 3/8" x 1/16"
1/4" x 31/64" x 1/16"
5/16" x 9/16" x 5/64"
3/8" x 43/64" x 7/64"
7/16" x 49/64" x 1/8"
1/2" x 55/64" x 9/64"
9/16" x 15/16" x 1/8"
5/8" x 1-3/64" x 5/32"
3/4" x 1-1/4" x 3/16"
#4
#6
#8
#10
#12
1/4"
5/16"
3/8"
7/16"
8 x 7/16" x 1/32"
10 x 1/2" x 1/32"
12 x 9/16" x 1/16"
1/4" x 9/16" x 3/64"
5/16" x 5/8" x 1/16"
3/8" x 3/4" x 1/16"
7/16" x 3/4" x 3/32"
H53081803
H53102003
H53143004
H53163605
H53184306
H53204807
H53225508
H53266710
8 x 9/32" x 3/64"
10 x 5/16" x 3/64"
1/4" x 15/32" x 1/16"
5/16" x 9/16" x 5/64"
3/8" x 43/64" x 3/32"
7/16" x 3/4" x 7/64"
1/2" x 55/64" x 1/8"
5/8" x 1-3/64" x 5/32"
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
H52040000
H52060000
H52080000
H52100000
H52120000
H52140000
H52160000
H52180000
H52200000
H52220000
H52260000
H52280000
H52300000
#4
#6
#8
#10
#12
1/4"
5/16"
3/8"
7/16"
1/2"
5/8"
11/16"
3/4"
Hardened flatwasher, chrome
H42062002
H42082402
H42102804
H42143204
H42163604
H42184004
H42204804
H42225604
H42267604
H46143906
H46164306
H46185106
H46205806
H46226708
H46267308
50
H45082402
H45102803
H45144004
H45164404
H45185204
H45206004
H45226804
H45268404
8 x 3/8" x 1/32"
10 x 7/16" x 3/64"
1/4" x 5/8" x 1/16"
5/16" x 11/16" x 1/16"
3/8" x 13/16" x 1/16"
7/16" x 15/16" x 1/16"
1/2" x 1-1/16" x 1/16"
5/8" x 1-5/16" x 1/16"
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
Lockwasher, stainless steel
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
H55081802
H55102003
H55143004
H55163605
H55184406
H55204807
H55225408
H55266709
8 x 9/32" x 1/32"
10 x 5/16" x 3/64"
1/4" x 15/32" x 1/16"
5/16" x 9/16" x 5/64"
3/8" x 11/16" x 3/32"
7/16" x 3/4" x 7/64"
1/2" x 27/32" x 1/8"
5/8" x 1-3/64" x 9/64"
0.30
0.30
0.30
0.30
0.30
0.30
0.30
0.30
Internal lockwasher, zinc
AN flatwasher (small O.D.), zinc
6 x 5/16" x 1/32"
8 x 3/8" x 1/32"
10 x 7/16" x 1/16"
1/4" x 1/2" x 1/16"
5/16" x 9/16" x 1/16"
3/8" x 5/8" x 1/16"
7/16" x 3/4" x 1/16"
1/2" x 7/8" x 1/16"
5/8" x 1-3/16" x 1/16"
Flatwasher, stainless steel
0.30
0.30
0.30
0.30
0.30
0.30
0.30
Standard lockwasher, chrome
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
n.a.
0.20
0.20
External lockwasher, zinc
H51040000
H51060000
H51080000
H51100000
H51120000
H51140000
H51160000
H51180000
H51200000
H41082802
H41103202
H41123604
H41143603
H41164004
H41184804
H41244806
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
1/4" x 39/64" x 3/32"
5/16" x 43/64" x 3/32"
3/8" x 51/64" x 3/32"
7/16" x 29/32" x 3/32"
1/2" x 1-3/64" x 1/8"
5/8" x 1-9/64" x 1/8"
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
Fender washer (large O.D.), zinc
0.80
0.80
0.80
0.80
0.80
0.80
H44106404
H44146404
H44169604
H44189604
10 x 1" x 1/16"
1/4" x 1" x 1/16"
5/16" x 1-1/2" x 1/16"
3/8" x 1-1/2" x 1/16"
0.20
0.20
0.20
0.20

vl - Jan Willem Boon

Transcription

Similar documents

panhead

wl - Jan Willem Boon