ENGINEERED FLOOR ≈1/2” (12 MM) THICK AND

Transcription

ENGINEERED FLOOR ≈1/2” (12 MM) THICK AND
ENGINEERED FLOOR ≈1/2”
(12 MM) THICK AND COMPOSED
OF A ≈5/32” (4MM) HARDWOOD
TOP LAYER ON ≈5/16” (8MM)
BALTIC BIRCH PLYWOOD
COMPRISING 7 LAYERS.
FEATURES & BENEFITS
INSTALLATION AREAS
Thick wear layer
Random board lengths for a more natural look
Can be installed directly on concrete
Proven technology
Excellent stability by its construction
Several installation options all with optimal performances
100% Made in Canada
No toxic volatile organic compounds (VOCs)
MAPLE
RED OAK WALNUT
ASH
HOUSE
NAILED
WHITE
OAK
HARDNESS OF SPECIES (COMPARED TO RED OAK)
%
JANKA
TEST
HIC KO RY
HARD M APLE
WHIT E OAK
ASH
1 41 %
112%
1 05 %
1 02 %
(1820)
(14 50)
(13 60)
(13 20)
R E D OAK
100%
(129 0)
Y E L LOW BI R C H 9 8 %
78 %
WAL NUT
74 %
C H E R RY
(except for exotic
species)
CONDO
INSTALLATION METHODS
AVAILABLE SPECIES
YELLOW
BIRCH
RADIANT HEAT:
YES
GLUED
FLOATING
SUGGESTED SUBFLOOR
SoundLoc 2.0 (for floating installation),
PreVap (if nailed), acoustitech (for double
glued installation) or en equivalent accepted by
the NWFA*.
FLOATING ONLY
(126 0)
(1010)
(950)
SoundLoc 2.0
* National Wood Flooring Association
Note: Information subject to change. Refer to preverco.com for the latest information.
PreVap
SPECIFICATIONS
APPLICABLE STANDARDS
½” (12 mm)
THICKNESS:
WIDTHS:
LENGTH:
3 ¼" (83 mm)
5 3/16" (131 mm)
3 ¼" (83 mm): Random lengths from 12"
(35 cm) to 78" (1,95 m)
5 3/16" (131 mm) : Random lengths from 12"
(35 cm) to 84" (2.13 m)
AVAILABLE ACCESSORIES
•Maintenance Kit
•Touch up pens
•Stain
SURFACE BURNING (ASTM-E-84):
• FSI (Flame-Spread index) 95 to 155 Class C (depending
on species)
• SD (Smoke Development) 95 to 400 (depending
on species)
SURFACE BURNING (ULC-S-102-2):
• FSV (Flame-Spread value) 65 to 155 (depending
on species)
• SDC (Smoke Development Classification) 270 to 485
(depending on species)
CRITICAL RADIANT FLUX (ASTM-E-648-94A):
•Stair Nosing
•Reducer
•Threshold
•"T" Molding
•Quarter round
•Subfloors
0,42 to 0,65 W/cm2 (depending on species)
FORMALDEHYDE EMISSION (ASTM-E-1333-02):
< 0,01 ppm
FORMALDEHYDE EMISSION (BS EN 120:1992):
1,5 mg/100 g (Class E1) (depending on species) PACKAGING DETAILS
VOC TOTAL (ASTM-D-6670-01):
3¼” (83 mm)
5 3/16” (131 mm)
Content of
a box
30 sq.ft. (2,787 m2)
34 sq.ft. (3,158 m2)
Size of a box
78 1/16" L x 10 1/16" W x 3 1/16" H
(199,4 x 25,6 x 7,8 cm)
84” L x 11” W x 3 1/16” H
(213,4 x 27,9 x 7,8 cm)
Weight of a
box (Average) 53 lb (24 kg)
55 lb (25 kg)
Content of
a pallet
40 boxes =
1 200 sq.ft. (111,5 m2)
4 boxes/W x 10 boxes/H
40 boxes =
1 360 sq.ft. (126,3 m2)
4 boxes/W x 10 boxes/H
Size of
a pallet
79" L x 41" W x 35" H
(200,6 x 104,1 x 88,9 cm)
84" L x 45" W x 35" H
(213,4 x 114,3 x 88,9 cm)
YEAR
PR E V E RCO
WARRANTY
SIGMA FINISH
(40-10-PRO)
35-years warranty for
residential application
(see full warranty brochure)
< 0.011 ppm (depending on species)
RECOMMENDATIONS
Conduct a moisture test in different areas of the subfloor
and record your readings. For plywood and OSB subfloors,
the percentage moisture difference between the hardwood
floor and the subfloor must not exceed 2 % with a
maximum of 12 % for the hardwood. For concrete subfloors,
the moisture content of the concrete should never exceed
4 %. The installer and the floor owner are both responsible
for measuring the moisture content of the subfloor and
making sure it is within the recommended level prior
to installation.
COMMERCIAL USE
3-year warranty for light commercial applications
(see full warranty brochure)
PREOIL
Refer to the paragraph in the warranty
brochure for more details concerning the
PreOil finish
Confident that its hardwood floors
PEFC/26-31-71
PEFC/26-31-71
SFI-01251
CREATING AMBIANCE™
SFI-01251
PEFC/26-31-71
SFI-01251
Promoting Sustainable
Promoting Sustainable
Forest Management
Forest Management
www.pefc.org
www.pefc.org
Promoting Sustainable
Forest Management
www.pefc.org
285, De Rotterdam Street, Saint-Augustin-de-Desmaures (Quebec) G3A 2E5, Canada
Telephone: 418 878-8930 | Toll free (Canada & USA): 1 877 667-2725 | Email: info@preverco.com
PREVERCO.COM
VERSION : 02/16
Packaging