BHG Courts Landing 12ft x 10ft Valance Gazebo ASSEMBLY

BHG Courts Landing 12ft x 10ft Valance Gazebo ASSEMBLY

BHG Courts Landing 12ft x 10ft Valance Gazebo
ASSEMBLY INSTRUCTIONS
ITEM# BH15-092-099-16
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Questions, problems, missing parts with this product? Do not return to your
retailer,please call our customer service department 9:00 a.m. to 5:00 p.m.
Eastern Standard Time Monday through Friday Phone # 1-800-457-4652
or contact us at www.numarkcustomerservice.com
DON’T RETURN TO STORE
1
WARNINGS AND CAUTIONS
＊ This gazebo is made for explicit purpose of providing limited outdoor sun shade and is
not to be used as a toy, shelter or tent. This pergola is not intended for inclement weather
in any form including, but not limited to: rain, hail, sleet, snow and/or wind. Do not locate
structure near any open flame. Do not use structure as a support. Do not shake, lean or
climb on structure. Children under age of 10, near the structure, should be supervised by
a competent adult at all times.
＊ Read through all the instructions before beginning assembly. Unpack and identify
all the parts.
＊ Assembly by four people is recommended.
＊ Estimated Assembly Time: 90 minutes
CLEANING AND MAINTENANCE
＊ Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not
use bleach or solvents. Cover furniture with outdoor furniture covers when not in use.
＊ Keep
all flame and heat sources away from canopy fabric.
The canopy is made with flame-resistant fabric which meets CPAI-84 specifications.
It is not fireproof. The canopy fabric will burn if left in continuous contact with
flame source. The application of any foreign substance to the canopy fabric may
render the flame-resistant properties ineffective with.
DON’T RETURN TO STORE
2
Remove all components from the polybag and unwrap all package materials. Please
count the components, there are:
NO.
Part
Description
Quantity
A1
A
Short Slim Bar
2
A2
Short Slim Bar
2
B1
Long Slim Bar
2
B21
B2
Long Slim Bar
2
C1
Short Panel
2
C2
Short Panel
2
C3
Long Panel
2
H
C4
Long Panel
2
2
D1
Leg Post
4
D2
Post Top Decorative
44
E
Supporting Bar
8
F1
Canopy Frame
1
F2
Canopy Connection Bar
4
G
Canopy Fabric
1
H
Net
4
I
Base Plate
4
J
Post Base
4
DON’T RETURN TO STORE
3
DON’T RETURN TO STORE
4
ACCESSORIES
NO.
Part
Description
Quantity
K1
Counter Sink
Bolt
8+1 spare
K2
M6x15L Bolt
50+2 spare
K3
M6x20L Bolt
48+2 spare
K4
M6x25L Bolt
K5
M6x30L Bolt
K6
M6 Metal Washer
122
K7
M6 Nut
4
4
16+1 spare
K8
L-shaped Bracket
4
K9
Triangle Bracket
4
K10
S-Hook
1
K11
Canopy Decorative Finial
1
K12
Lawn Stake
16
K13
Allen Wrench
2
K14
Open Hex Wrench
1
K15
Long Allen Wrench
1
K16
Assembly
instructions sheet
1
DON’T RETURN TO STORE
5
Step 1
K2 x 4
M6x15L Bolt
K6 x 4
M6 Metal Washer
NOTE: Please strictly complying with the graphic to tighten the bolts.
Do not tighten completely.
Repeat procedure for the other pair A1&A2.
Step 2
K6 x 6
K2 x 6
M6x15L Bolt
M6 Metal Washer
NOTE: Please strictly complying with the graphic to tighten the bolts.
Do not tighten completely.
Repeat procedure for the other pair B1&B2.
DON’T RETURN TO STORE
6
Step 3
K3 x 8
M6x20L Bolt
K6 x 8
M6 Metal Washer
K8 x 4
L-Shaped Bracket
NOTE: Please use the middle hole only for this step.
Do not tighten completely.
Repeat procedure for the other three corners.
Step 4
K6 x 8
K2 x 8
M6 Metal Washer
M6x15L Bolt
NOTE: The 2 brackets should be meanwhile inserted into the holes.
Do not tighten completely.
Repeat procedure for the other pair C1 and C2.
DON’T RETURN TO STORE
7
Step 5
K2 x 8
M6x15L Bolt
K6 x 8
M6 Metal Washer
NOTE: The 2 brackets should be meanwhile inserted into the holes.
Do not tighten completely.
Repeat procedure for the other pair C3 and C4.
Step 6
K2 x 4
M6x15L Bolt
K3 x 24
M6x20L Bolt
K6 x 28
M6 Metal Washer
NOTE: (1)The ‘inside’ means the panel with the bracket should face inside.
(2)The blank side of the post top decorative should face inside.
Do not tighten completely.
Repeat procedure for the other three post top decorative D2.
DON’T RETURN TO STORE
8
Step 7
K3 x 8
M6x20L Bolt
K6 x 8
M6 Metal Washer
NOTE: the oblique side should be upside for the bracket K9.
Do not tighten completely.
Repeat procedure for the other three brackets.
Step 7
K4 x 4
M6x25L Bolt
K6 x 8
M6 Metal Washer
K7 x 4
M6 Nut
NOTE: The side with the label’TOP’ should be upside on the bar F2
Do not tighten completely.
Repeat procedure for the other three bars F2.
DON’T RETURN TO STORE
9
K11 x 1
Step 8
Canopy Decorative Finial
Step 9
K2 x 4
M6x15L Bolt
K6 x 12
K3 x 8
M6x20L Bolt
M6 Metal Washer
Do not tighten completely.
Repeat procedure for the other three brackets K9．
DON’T RETURN TO STORE
10
Step 10
K1 x 8
Counter Sink Bolt
NOTE:The side with the counter sink hole should be
outside for the bracket J.
Repeat procedure for the other three legs．
Tighten all the bolts.
Step 11
K2 x 16
M6x15L Bolt
K6 x 16
M6 Metal Washer
Tighten all above the step’s bolts.
Repeat procedure for the other three legs D1．
DON’T RETURN TO STORE
11
Step 12
K5 x 16
M6x30L Bolt
K6 x 16
M6 Metal Washer
Tighten all the bolts.
Repeat procedure for the other supporting bars E．
Step 13
K10 x 1
M6 Metal Washer
NOTE: the side with the label’short’ on the canopy fabric should be correspondent
with the side marking the ‘short’ label on the slim bar.
DON’T RETURN TO STORE
12
K12 x 16
Step 14
Lawn Stake
Step 15
NOTE: The entrance of the nets should be in the middle of the 2 leg post D1.
DON’T RETURN TO STORE
13
Step 16
Now you can use your gazebo!．
DON’T RETURN TO STORE
14
Printed in China.