IND-Smith Welding and Fabrication Equipment 5/21/2015

IND-Smith Welding and Fabrication Equipment 5/21/2015
GENERAL TERMS AND CONDITIONS OF SALE -THURSDAY MAY 21, 2015
ORDER OF SALE:
ITEMS WILL BE SOLD IN NUMERICAL ORDER. It will be at the discretion of the Auctioneer to sell items out of sequence, divide or
consolidate lots.
REGISTRATION:
By registering as a Bidder and/or participating as a Bidder at the auction sale Bidder is bound by the Terms & Conditions set forth herein
and announced on the day of sale. Bidder agrees that such Terms & Conditions are binding on the Bidder whether or not the Bidder was
present and/or heard such announcements. Bidder agrees that Auctioneer is in control of the conduct of the auction sale and has the right
to reject any bid by any Bidder at the auction sale. It is at the sole discretion of the Auctioneer as to whether or not any bid is in
conformity with the Terms & Conditions of the auction sale. Furthermore, Auctioneer may refuse to accept a bid whenever, in his sole
discretion bid is not in good faith or Bidder appears to be under the influence or have some incapacity at time of sale. ALL PERSONS
must be registered to bid and will be identified by number to facilitate the speed of the auction.
TIE -BIDS
Auctioneer will rule in case of "TIE" Bids. In the event of a TIE BID or any uncertainty as to offered last and highest bid the Auctioneer
has a right to resolve any such at the time by accepting the Bid that the Auctioneer believes is in good faith and was the last, highest and
best bid. Auctioneer may open the bidding between the parties at his discretion and option and such decision will be final and binding on
affected parties.
SALES TAX:
Sales tax will be collected if applicable. Dealers can present Resale Certificates.
REMOVAL:
Auctioneer and Seller assume no responsibility for items left on sale site at sale's conclusion. Buyer is URGED to REMOVE ITEMS as
soon as possible or to self insure for potential loss. Removal will be until 5:00 pm today or 1-hour following the sale, whichever is later.
Additional Removal: FRIDAY MAY 22nd AND TUESDAY MAY 26th FROM 8:00 am TO 4:00 pm. AFTER WHICH ITEMS WILL
BE CONSIDERED ABANDONED BY BUYER AND DISPOSED OF.
NOTICE TO INSPECT "AS_IS WHERE IS":
Auctioneer presents all information in brochures, catalogs, and other advertisements from sources believed to be accurate. These are
representations of the Auctioneer. Prospective Buyers should inspect all items to their own satisfaction. "BUYER BEWARE" Items are
available for public inspection and the foregoing are merely guides. ALL ITEMS are being sold AS IS-WHERE-IS with no warranty or
guarantee-actual or implied.
TERMS:
A 12% Buyer's Premium will be collected, an additional 5% Buyer's Premium for Online Bidders. Payment must be made in full day of
sale by CASH, WIRE TRANSFER, CASHIER'S CHECK or COMPANY CHECK if Accompanied by BANK LETTER of GUARANTY,
CREDIT CARDS to include: MASTERCARD or VISA ONLY. After an item has been sold, it becomes the sole responsibility of the
Purchaser. No items can be removed until complete settlement has been made. Settlement can be made at any time during the sale.
Furrow Auction Company
Page: 2
IND-Smith Welding and Fabrication Equipment 5/21/2015
Settlement must be made today and an invoice with the paid item receipt will be supplied to the Purchaser upon settlement. The PAID
receipt ticket will be required in order to remove items from the site. All checks should be made payable to Furrow Auction Company.
"ALL SALES ARE FINAL"
ONLINE BIDDING TERMS:
Online Bidders should review the "Online Terms & Conditions" in detail and will be held to those terms.
SAFETY DEVICES:
Items purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards as required by law. It is
Purchaser's responsibility that items purchased be so equipped and safeguarded to OSHA and any other requirement before placing items
into operation.
All Riggers, Contractors or Buyer's conducting specialized removal must provide a "Certificate of Insurance" with a minimum $1 million
total liability and naming Furrow Auction Company and Seller as "LOSS PAYEE". Qualified and Insured Riggers must perform removal
of items that may affect the Real Property. Damage responsibility will be the responsibility of the Riggers and Buyers of item removed.
Rigging and Removal is the responsibility of the Buyer. All removal activity must be in accordance with OSHA Guidelines and
Standards. Removal may begin when auction has concluded and complete payment has been made.
OUR STAFF
SAM FURROW - OWNER/AUCTIONEER
BLAKE WILSON - VP INDUSTRIAL DIVISION, AUCTIONEER
WIL WAUGH - AUCTIONEER/PROJECT MGR
YOU CAN REACH US AT OUR EMAIL ADDRESS:
FURROW@FURROW.COM
VISIT WWW.FURROW.COM TO VIEW ALL UPCOMING AUCTIONS. OUR FAX NUMBER IS 865 525-4179.
1
SKIL Saw, 1/2" Electric Drill
2
(2) 1/2" Electric Drills, (1) Ridgid, (1) Milwaukee
3
Bosch Mdl 11224VSR Rotary Hammer Drill
4
Dewalt 1/2" Drive Electric Impact Wrench
5
(3) Electric Jig Saw,(1) Dewalt, (2) Black & Decker
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
6
Belt Sander
7
(3) Sanders Palm & Orbital
8
Dewalt Reciprocating Saw
9
Set Precision Balance Scales
10
Watsco Mdl WC-5 Micro-Flash, W/Recovery System
11
Air Hoses and Vacuum Pump
12
Ryobi 10" Portable Table Saw
13
1hp Air Compressor, Storage Tank
14
Central Pneumatics 40LB
Page: 3
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
15
Viper 4316, 1-Man Auger, W/6", 8" Auger
16
2500PSI Pressure Washer, Honda Gas Engine
17
Ryobi 3100PSI, 2.5 Gallon Pressure Washer, W/Honda Gas Engine
18
Miller Dial arc Arc Welding Power Source, W/Tig Welder, Leads
19
Miller Millermatic 251 Wire Feed Welder
20
Miller 250 Wire Feed Welder
21
Miller Millermatic 250 Wire Feed Welder
22
Changshundianqi Mdl NBC-270 Welder
23
Miller Blue Star 3500 Watt Generator/140Amp Gas Welder, W/Honda 9HP gas Engine
Page: 4
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
24
Miller Spectrum 875 Auto Line DC Plasma Cutter
25
Miller Spectrum 300 Plasma Cutter
26
Lincoln SP-135T Wire Feed
26A Lincoln 225, 225Amp Arc Welder
27
Taylor-Winfield Spot Welder
28
Miller Spoolmatic 30A Aluminum Spool Gun
29
Cutting Torches, Regulators, etc
30
Various Welding leads
31
Various Welding leads
Page: 5
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
32
Scotchman Portafab 45, 45Amp Iron Worker
33
Northern Industrial 7" X 12" Horizontal Band Saw
34
Pro-Cut 7" X 12" Horizontal Band Saw
35
Ridgid 14" Abrasive Chop Saw
36
Wilton 20" Vertical Drill Press, 12sp
37
Craftsman 50" 12sp Vertical Drill Press
38
M & M 16sp Mdl H-406S Vertical Drill Press
39
Toledo Scale, W/Sterling Digital Controller, Digital Read-out, 5,000lb
40
Skat Blast Sand Blast Cabinet
Page: 6
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
41
Rockwell Mdl 50004, 3hp Vacuum, 55 Gallon Drum
42
Hotsy Mdl 500 Steam Type Pressure Washer
43
Power Pro 2400PSI, 5 1/2hp Honda Pressure Washer
44
Readi-Heater 170C, 170,000 BTU Forced Air Heater
45
Readi-Heater Pro 115, 115,000 BTU Forced Air Heater
46
Vacuum
47
Wrought Iron Inserts, etc (on 3-shelves)
48
Shelving W/Contents, Safety Hats, Nuts, Bolts, Fasteners, etc
49
Maxair 40" Shop Fan
Page: 7
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
50
Maxair 40" Shop Fan
51
Custom Built 36" Box Fan
52
Excalibur 4,000LB Engine Hoist
53
Unibor Mdl EQ50 Magnetic Drill
54
Custom Built Shop Cart, W/6" Jaw Vise, Bench Grinder, etc
55
Electric Air Compressor, 2hp
56
Milwaukee Portable Band Saw
57
Dewalt Portable Band Saw
58
(4) Foundation Jacks
Page: 8
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
59
Custom Built Metal Shop Cart
60
Custom Built Metal Rack, (2) Metal Carts, etc
61
Torch Cart, W/Hoses, Torches, Tooling, etc
62
Regulators, Torches, etc
63
Misc Welding Wire, Rods, etc
64
Angle Grinders, Electric Drills, Reciprocating Saws, etc
65
Misc Bar Clamps
66
Misc Bar Clamps
67
Contents Box, Misc Vise Grips, Clamps
Page: 9
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
68
Contents (2) Boxes, C-Clamps
69
Misc Hand Tools, Hammers, Punches, Squares, Levels, etc
70
Dewalt 14" Abrasive Chop Saw
71
Milwaukee Cordless Portable Band Saw
72
Warn 110 Volt, 1,000LB Electric Winch
73
Homelite 5500 Watt Generator
74
Impact Sockets
75
2 1/2 Ton Floor Jack
76
Hydraulic Tubing Bender
Page: 10
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
77
Clarke Portable Bender, W/Pedestal
78
(4) Jack Stands, (4) Custom Built Stands
79
48" X 72" Metal Welding Table, W/6" Jaw Vise
80
36" X 60" Custom Built Metal Welding Table on casters
81
49" X 125" Custom Built Welding Table
82
48" X 120" Custom Built Welding Table
83
Metal Stock , Square Tube, Round Bar, Channel, Flat Stock etc
84
Custom Built Metal Storage Rack
85
(5) Custom Built Metal Work Horses, (2) Roller Stands
Page: 11
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
86
Custom Built Wood Burning Heater
87
10hp Air Compressor Horizontal Tank, Single Stage
88
Caterpillar Mdl T50DSA Forklift, 5,000LB, LP Gas Solid Tire, W/Side Shift, S/N 9PB262,
188" Lift
89
Drott Mdl 3330 Carry Desk Crane, LP Gas, 3-Stage Mast, S/N 6224692
90
Bayliner 24' Cuddy Cabin Boat, W/galvanized Trailer, Mercuriser, Inboard/Outboard
91
1986 Carver 27' Cabin Cruiser, W/Twin Mercruiser, 1.7 Liter Engine, 190hp, S/N
CDRH6153F787
92
Custom Built 48" X 72" Tag-A-Long Trailer
93
1955 Chevy 2-Door, 55 Chevy Post Body, Finders, Frame (to reassemble) (no motor and
transmission)
Page: 12
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
94
1971 Chevy C-10 Short Bed (no motor no transmission)
95
1978 Suzuki GS1000 Motorcycle, ODO 33,911, Vin GS1000102575 (Title)
96
Starcraft Roadstar Truck Bed Camper (Camper Insert)
97
White Lighting Race Track Type Tool Box
98
Set 72" Warehouse Steps
99
Husky Over/Under Tool Box on casters
100
(3) Plastic Shelves, W/Contents, Misc Oils, Cleaning Chemicals, Grease, etc
101
Misc Nut Drivers, Screwdrivers, etc
102
Misc Hammers
Page: 13
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
103
Contents Box , Tape, Stud Finders
104
O-rings, Gaskets, etc
105
Misc Hand Tools, Plyers, Bar Clamps, Pullers
106
Misc Abrasives, Disc, Sand Paper, Belts, etc
107
Files, Hand Tools, Pipe Expansion Tools
108
(5) Gear Pullers, Pitman Arm Pullers, etc
110
CPS Freon Scale, etc
111
Radiator, Pressure Tester, Pressure Gauges, etc
112
(3) Set 6" Calibers, Manual, Dial, Digital, Outside Micrometer
Page: 14
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
113
Hyper Jet Power Programmer for 7.4 Liter Ford Diesel Engine
114
Dewalt 18 Volt Cordless Drill
115
Drillmaster 7" Variable Speed Polisher/Sander
116
Stapler, Black & Decker Cordless Drill
117
(2) Boxes Various Sockets, Extensions, etc
118
(2) Boxes Various Size Open End Box and Wrenches
119
Craftsman Socket Set, Box, W/Misc Sockets
120
Tape & Die Set, Drill Bits, etc
121
Misc Pneumatic Tools, Impact Gun, etc
Page: 15
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
122
Husky Tool Box on casters
123
Cornwell 2-Drawer Work Cart on casters
124
Ridgid Wet/Dry Vac
125
Janitrol Gas Shop Heater
126
Carrier Gas Hanging Type Shop Heater
127
(7) White ??????
128
(3) Hose Reels, (1) W/Hose
129
Misc Abrasives Wheels 20"
130
OX/Acyl Hose, etc
Page: 16
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
131
Pexto Edger
132
Garwood Industries Mdl A514-30 Hoist
133
Ingersoll Rand Pneumatic Hoist
134
(7) Electric Motors
135
(6) Electric Motors, (5) GE 3hp, (1) Dayton 3hp
136
Kold-Draft Ice Crusher
137
(2) Eye Wash Stations
138
Goodway Ream-a-matic Pipe Reamer
139
Nova 390 Paint Pump, W/gun
Page: 17
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
140
Juki Mdl LU-563 Walking Foot Sewing Machine
141
3 1/2hp 21" Lawn Mower
142
Rally 22" 4hp Lawn Mower
143
Shindaiwa String Trimmer
144
John Deere Pull Behind Spreader
145
55 Gallon Drum Spinner/Dolly
146
Golden Glow Wood Burning Stove
147
(8) 8' Cable Chokers
148
(16) Small Chokers, (8) 48" , (8) 60"
Page: 18
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
149
(8) 8' Cable Chokers
150
(10) Various Size Cable Chokers
151
(12) Cable Chokers
153
(10) Various Size Cable Chokers
154
Wooden Table W/Contents, Air Storage Tank, Misc Fasteners, Screws, Bolts, etc
155
Misc 4 1/2" Grinding Wheels, 7" Grinding Wheels, etc
156
Misc Fasteners, Screws, Bolts, Nuts, etc
157
Misc Paints, Degreaser, etc
158
Welding Rod Cabinet
Page: 19
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
159
20" Aluminum Extension Ladder
160
16' Aluminum Extension Ladder
161
Fuel Cans, Oil Cans, Creeper, etc
162
Vacuum Gauge, etc
163
2" Belt Sander
164
Mitre Box and Saw mounted on table
165
2-Ton Floor Jack, 1 12/-Ton Floor Jack, (3) Jack Stands
166
Misc Yard Tools, Hedge Trimmer, Pole Saw, Electric String Trimmer, Rake, etc
167
Contents (3) Containers, Hydraulic Jack Oil, Various Oils, Nails, Fasteners, etc
Page: 20
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
168
(6) Bolt Bins, Misc Bolts, Nuts, Screws, Cap Screws, Washers, etc
168A (2) 220 Volt Drop Cords
169
Under- counter Refrigerator
170
Automotive Air Conditioner Compressor, Condensers, Hoses, etc
171
Drink Vending Machine
172
(4) Pedestal Shop Lights
173
Decorative Wooden, Glass Front & Side Curio Cabinet
174
Wood and Metal Display Rack, Wooden Office Table
175
(2) Upholstered Recliners
Page: 21
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
176
(2) Metal Frame Stack Chairs
177
Wooden Drafting Table
178
Pressed Wood Credenza, W/Hutch
179
Upholstered Mid-back Office Chair
180
8' Folding Table
181
Dry Erase Boards, Cork Board, File Cart on casters
182
L-Shaped Pressed Wood Desk, W/Right hand Return, W/Hutch
183
(2) Flat Screen Computer Monitors, HP PAC 1410 All-N-One Printer
184
HP Color Laser Jet 4650N Printer
Page: 22
Furrow Auction Company
IND-Smith Welding and Fabrication Equipment 5/21/2015
185
HP Laser Jet 4300TN Printer
186
Brother MFC6550 Fax Machine, Paper Cutter
187
Misc Office Supplies Clip Boards, Pins, Files, Folders, etc
188
(2) 3-Drawer Metal File Cabinets
189
Remaining Furniture in Office, Wing Back Upholstered Chair, Task Chair on casters, Metal
Framed Glass Top Coffee Table, Office Table
Page: 23