Glazing Rubber Products, Inc.

Transcription

2
Index
Introduction
4
Glazing System Conversion Chart
7
Setting Blocks
19
EPDM Blocks/Silicone Blocks
20
Santoprene Blocks
21
EPDM / Silicone Rolls
21
Clear Mirror Blocks
21
Anti-Walk Side Spacers / W-Blocks
22
7# Light Density PVC Foam Tape
23
Polyolefin Glazing Tape
24
Structural Tape
25
Cords and Tubing
26
Weep Baffles
26
Plastic Horseshoe Shims
27
Stack Shims
28
EPDM & Silicone U-Channels
29
Terms and Conditions
30
Glazing Rubber Products, Inc. is a custom rubber and plastic extrusion company. We are in
no way related to or affiliated with any of the companies of the conversion parts we extrude.
All of the parts we manufacture are equal to or exceed the standards set forth by ASTM. For
more information, please do not hesitate to contact us, and as always, thank you for your
business.
Lead times for NON-standard parts is 3 to 4 weeks, and minimum quantities may be required,
please call for details. There is a $50.00 minimum on all orders.
4
GRP, Inc. is a leader in custom rubber and plastic extrusions located in North
Georgia since 2003. Our extrusions are used throughout the storefront,
construction, military, industrial, auto and marine industries. We offer a variety
of compounds along with color matching on any extrusion. Our compounds
(EPDM, Silicone, Neoprene, PVC and Santoprene) meet or exceed ASTM
standards. GRP will work with its customers throughout the process of design
to insure consistent quality and dimensional tolerances. The results are a
longer service life without failure! It is also aesthetically pleasing for use in
environments where the appearance is critical. These are complex processes
and the service is one we are proud of.
71 Easy Street | Dawsonville, GA 30534 | 1.800.851.1086 | Fax 706.344.1463
5
Storefront Gaskets
GRP manufactures and stocks a complete line of storefront glazing
products including extruded profiles for the construction and repair
of Kawneer, Bonnell, Vistawall, Amarlite, US Aluminum, YKK, PPG,
and Tubelite storefront glass systems.
New cross-sections are constantly being developed from a wide
variety of materials. A drawing can also be provided to give you an exact dimensional overview of part. Some parts
are produced with non-stretch cord embedded in the cross-section to reduce the amount of stretch encountered
by the gasket during installation.
Vulcanization or Molding
The majority of cross-sections can be produced in spliced frames if that is required in
your particular application. Splicing or joining the ends of gaskets can be performed by
several different means. The strongest and most widely used method is vulcanization.
This process is performed in a heated mold and permanently joins the gasket to form
rings or corners.
This process can be used to give the customer a small or extremely large gasket
without a large investment in a compression or injection tool. Gaskets of this type
are used in construction as well as industrial applications and the sizes of the finished
gasket are easily adjusted for the proper fit.
Compatibility
The assurance of compatibility of sealants cannot be overemphasized. Every glass installation involves
at least two sealants and frequently several more. These can be:
a) Sash joinery sealant
b) Exterior glazing sealant
c) Interior glazing sealant
d) Heel or toe bead
e) Insulating glass sealant
f) Butyral laminate in laminated glass
The proven compatibility of all materials involved is essential to the long term success of any glazing
installation. Chemical reaction from physical contact of incompatible materials can occur. Less frequently,
volatile constituents given off by one material can adversely affect another within the closed confines
of the glazing rabbet. Sealant manufactures generally are willing to conduct compatibility test in their
laboratories and to give the results in writing. Compatibility should always be investigated and never
assumed.
6
Plastic/PVC Extrusions
When it comes to performance, the right plastic extrusion material makes all the difference. Whether
you need your material to be strong yet lightweight, flexible, colorable or weatherized, GRP materials
experts help you select the best material for your application. Our relationship with leading plastic
compounders gives us quick access to the best materials with just the right properties to meet your
requirements.
Silicone Extrusions
GRP Specializes in colored silicones which have become widely popular with customers and architects
in storefront applications. Any of our extrusions can be made to match the colors you need. There is a
minimum on footages. Call for pricing.
Gasket Sample
Die Cutting/Tooling
Die Cutting Machine
At GRP, we cut all of our own extrusion dies in house. Whether for prototype or production tooling, our
tool and die team applies their extensive knowledge using advanced CAD/CAM software, machining
and the latest EDM technology to custom build the highest quality tools. GRP can make parts from a
blueprint, duplicate an existing extrusion or prototype, or we can custom design a product to satisfy
your needs. Think of us as your off-site design department, available to assist you with whatever part of
the process with which you need help. If you have an upcoming project that you want to talk over with
a GRP designer, call us and we’ll work with you to create the solution.
In the following pages you will see many of our extrusions designed for all types of applications.
Drawings are not to scale. We are able to produce 8” to 1/8th inch width extrusions. If you do not see
what you are looking for in the catalog please call our sales department. We will be happy to help you
identify a part you may be looking for or custom design it just for you.
7
Stocked Items Discount Schedule
Less than 10,000 feet.....................................................................................................List Price
10,000 to 25,000 feet.......................................................................................................Less 5%
25,000 to 50,000 feet...................................................................................................Less 7.5%
More than 50,000 feet..........................................................................................Call For Quote
The above discount schedule is for gasket extrusions from page 8 through page 18. Call for Pricing or go to our online
store to order all of the following products.
8
Cross section Profile
Glazing Product Number
Conversion Part
Number
Quantity Per
Box
70EPD-0862-500F
Arch/Amarlite
05430
500’
70EPD-0389-500F
Arch/Amarlite
05421
500’
70EPD-0085-500F
Arch/Amarlite
05212
500’
70EPD-0643-500F
Arch/Amarlite
05337
500’
70EPD-0353-500F
Arch/Amarlite
05427
500’
70EPD-0594-300F
Arch/Amarlite
H-63
05150
300’
70EPD-0008-500F
Arch/Amarlite
H63A
05151
500’
70EPD-0652-250F
Arch/Amarlite
H163-A
05153
250’
Arch/Amarlite
H-163
05152
250’
PR-111
PR-111A
PR-111B
PR-533
PR-110 WITH CORD
PR-116
PR-115
PR-147
70EPD-0561-250F
G-561
*Drawings are not to scale.
Call for Pricing
9
Conversion Part
Number
Quantity Per
Box
70EPD-0559-001K
CMI
Architectural
19-051
1000’
70EPD-0612-001K
CMI
Architectural
19-053
1000’
70EPD-2122-001K
CMI
Architectural
19-077
1000’
70EPD-0670-250F
EFCO
W-102
250’
70EPD-0758-250F
EFCO
W-107
250’
70EPD-0917-250F
EFCO
W-111
250’
70EPD-0427-300F
EFCO
W-132P
300’
70EPD-0968-250F
EFCO
WNE-O
250’
70EPD-1449-250F
EFCO
WEB-4
250’
PR-151
PR-109
PR-277
PR-102
PR-107
PR-2499
PR-132
PR-2494
PR-004
Call for Pricing
10
Conversion Part
Number
Quantity Per
Box
EFCO
WEB-9
250’
Kawneer
27-074
250’
70EPD-0303-250F
Kawneer
27-076
250’
70EPD-0659-500F-001
Kawneer
27-077
500’
70EPD-0354-500F-001
Kawneer
27-200
250’
70EPD-0423-500F-001
Kawneer
27-221
500’
70EPD-0422-500F-001
Kawneer
27-222
500’
70EPD-0186-500F-001
Kawneer
27-285
500’
70EPD-0212-500F
Kawneer
27-815
500’
70EPD-1277-250F
PR-009
70EPD-1438-250F
PR-129
PR-176
PR-177 WITH CORD
PR-113 WITH CORD
PR-106 WITH CORD
PR-104 WITH CORD
PR-105 WITH CORD
PR-815
Call for Pricing
11
Conversion Part
Number
Quantity Per
Box
70EPD-0020-500F
Kawneer
27-810
500’
70EPD-0256-250F
Kawneer
27-851
250’
70EPD-0090-250F
Kawneer
27-850
250’
80EPD-0804-250F
Kawneer
27-852
250’
70EPD-0641-500F
Kawneer
27-857
500’
70EPD-0960-250F
Kawneer
163-303
250’
70EPD-0356-250F
PR-162
Kawneer
162-310
250’
80EPD-0499-04IN-000-100P
PR-853
Kawneer
27-853
100 pcs.
PR-126
PR-851
PR-850
PR-852
PR-857
PR-163
Call for Pricing
12
80EPD-0302-04IN-000-100P
PR-073
80EPD-1452-04IN-000-100P
PR-080
Quantity Per
Box
x 11/4 x 4”
Kawneer
27-073
100 pcs.
x 11/4 x 4”
Kawneer
27-080
100 pcs.
5/8
11/16
50EPD-0098-500F
Pivot Window
Dart Sponge
500’
70EPD-0009-500F
U.S. Aluminum
NP-225
500’
U.S. Aluminum
1254
250’
70EPD-1044-250F
U.S. Aluminum
1256
250’
70EPD-0984-500F
U.S. Aluminum
NP-270
500’
70EPD-0505-500F
U.S. Aluminum
VB-150
500’
G-098
PR-225 WITH CORD
70EPD-1043-250F
PR-1254
PR-1256
PR-473
PR-125
Conversion Part
Number
Call for Pricing
13
Conversion Part
Number
Quantity Per
Box
70EPD-0469-500F
U.S.
Aluminum
1/8” Lock in
3/8” Face
NP-260
500’
70EPD-0016-300F
PR-130
Vistawall
FG-1133
300’
80EPD-0373-02IN-000-250P
PR-1136
2” LONG
Vistawall
FG-1136
250 pcs.
80EPD-0416-04IN-000-500P
PR-3146
4” LONG
Vistawall
FG-3146
500 pcs.
80EPD-0418-02IN-000-500P
PR-717
2” LONG
Vistawall
HP-17
500 pcs.
70EPD-0357-250F-001
E20052
YKK
250’
70EPD-1263-250F-001
E20052
YKK
250’
70EPD-0484-250F
E20100
YKK
250’
70EPD-0486-250F
E20101
YKK
250’
PR-119
PR-E252 (OLD)
WITH CORD
PR-E352 (NEW)
WITH CORD
PR-E100
PR-E101
Call for Pricing
14
70EPD-0758-250F
PR-2472
Quantity Per
Box
E20120
YKK
250’
Silicone
or EPDM
E20126
YKK
Silicone
or EPDM
E20127
YKK
Silicone
or EPDM
E20128
YKK
250’
E20053
YKK
300’
70EPD-0421-500F
.125 Face
Clearance
.062 Lock-in
500’
70EPD-0026-500F
.187 Face
Clearance
.062 Lock-in
500’
70EPD-0251-500F
.250 Face
Clearance
.062 Lock-in
500’
70EPD-0664-250F
.547 Face
Clearance
.250 Lock-in
250’
70SIL-0735-250F
70EPD-0735-250F
PR-E0126
70SIL-0734-250F
70EPD-0734-250F
PR-E0127
70SIL-0733-250F
70EPD-0733-250F
PR-E0128
70EPD-0158-300F
PR-158
PR-134
PR-135
PR-136
PR-1170
Conversion Part
Number
250’
250’
Call for Pricing
15
Conversion Part
Number
Quantity Per
Box
70EPD-0024-250F
.550 Face
Clearance
.250 Lock-in
250’
70EPD-0007-250F
.580 Face
Clearance
.250 Lock-in
250’
70EPD-1451-250F
.750 Face
Clearance
.250 Lock-in
250’
.800 Face
Clearance
.250 Lock-in
250’
70EPD-0646-500F
Columbia
9093
500’
70EPD-0428-300F
Columbia
9900
300’
70EPD-0630-250F
Columbia
P-9092
250’
70EP-0678-250F
Columbia
P-9982
250’
70EPD-0675-250F
Columbia
V-3596
250’
PR-1051
PR-1015
PR-1145
70EPD-0025-250F
PR-1052
PR-9093
PR-9900
PR-630
PR-2426
PR-2425
Call for Pricing
16
Conversion Part
Number
Quantity Per
Box
70EPD-0812-500F
Preset
500’
02SPG-0330-300F
Garage Door
Seal Sponge
300’
70EPD-0082-250F
G-082
250’
70EPD-1450-500F
Dense
Preset
500’
70EPD-0652-250F
5/8” Flush
Glaze
250’
70EPD-0013-500F
Skylight
Gasket
500’
70EPD-0057-500F
Spacer
.125 Face
Clearance
500’
70EPD-0060-500F
Preset Spacer
500’
70EPD-0178-250F
5/16” Face
1/8” Lock-in
250’
PR-142
G-330
PR-1155
PR-1179
PR-1165
PR-1030
PR-1121
PR-1123
PR-112
Call for Pricing
17
Conversion Part
Number
Quantity Per
Box
70EPD-0264-250F
1/4” Face
1/8” Lock-in
250’
70EPD-0667-500F
G-667
500’
70EPD-0061-500F
Preset
Spacer
500’
70EPD-0062-500F
Spacer
500’
70SIL-0945-500F
3/8” Face
3/16” Lock-in
500’
70EPD-0174-250F
R-178
250’
70EPD-0152-500F
Stylemark
500’
70EPD-0699-500F
PPG
17-004-6300
500’
PPG
14-441-6300
500’
PR-2487
PR-667
PR-1124
PR-1125
PR-2340
PR-178
PR-013
PR-118
70EPD-0666-500F
PR-441
Call for Pricing
18
Conversion Part
Number
Quantity Per
Box
70EPD-0103-500F
G-1040
500’
06SPG-0023-250F
Sponge
Preset
250’
70EPD-0783-500F
Bulb Gasket
500’
70EPD-0018-250F
Tubelite
P-528
250’
70EPD-1238-500F
G-1238
Tubelite
P-2728
500’
70EPD-0719-600F
Tubelite
300’
70EPD-0718-600F
Tubelite
300’
50EPD-0037-500F
Tubelite
P-302
500’
70EPD-0897-500F
Wedge
Gasket LG
500’
70EPD-0864-500F
Wedge
Gasket SM
500’
PR-114
PR-1050
PR-783
PR-202
PR-2528
PR-1043
PR-133
G-897
G-864
Call for Pricing
19
19
Setting Blocks
GRP manufactures and stocks a complete line of EPDM, Silicone, and Santoprene setting
blocks for use in installing and repairing storefront glass systems. Setting blocks are
used to position the glass into the frame. Setting blocks are generally produced in EPDM
or Neoprene with a Shore A hardness of 80-90 durometer. There are other durometers
available for your special glazing needs. Other polymers, such as silicone may be used
as glazing systems require. When used in combination with heel and toe beads, they
should be first buttered with sealant, then placed prior to installing glass. This ensures
an uninterrupted seal between the glass and sash member.
As a general rule, setting blocks should be centered at 1/4” points. However, engineering
requirements may dictate an alternate location for block placement. Setting blocks should
be designed to prevent shifting, provide life long support of the full thickness of the in fill,
establish minimum recommended bite and edge clearance, allow for the flow of water
by the block to the drainage system, and provide for the installation of glazing seals and
assembly of the system.
Stocked Items Discount Schedule
2,500 pieces per size.......................................................................................................................................................................................Less 10%
5,000 pieces per size.......................................................................................................................................................................................Less 15%
10,000 pieces per size................................................................................................................. ..............................................................Call For Quote
Custom sized Setting Blocks are available. If you don’t see your required size of block, please
call for pricing.
20
80 +/-5 Durometer EPDM Setting Blocks
Thickness
Widths
Lengths
1/16”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
2”, 4”, 6”, Custom
1/8”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
2”, 4”, 6”, Custom
3/16”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
2”, 4”, 6”, Custom
1/4”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
2”, 4”, 6”, Custom
3/8”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
2”, 4”, 6”, Custom
1/2”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
2”, 4”, 6”, Custom
3/4”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
2”, 4”, 6”, Custom
5/8”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
2”, 4”, 6”, Custom
1”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
2”, 4”, 6”, Custom
PSA/Adhesive
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
2”, 4”, 6”, Custom
Sold in Packages of 100.
80 +/-5 Durometer Silicone Setting Blocks
Thickness
1/16”
1/8”
3/16”
1/4”
3/8”
1/2”
Widths
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
Lengths
2”, 4”, 6”, Custom
2”, 4”, 6”, Custom
2”, 4”, 6”, Custom
2”, 4”, 6”, Custom
2”, 4”, 6”, Custom
2”, 4”, 6”, Custom
Discount Schedule
2,500 pieces per size ..................................................................................................................................................................................... Less 10%
5,000 pieces per size ......................................................................................................................................................................................Less 15%
10,000 pieces per size ............................................................................................................ .............................................................. Call For Quote
21
80 +/-5 Durometer Santoprene Setting Blocks
Thickness
1/16”
1/8”
1/4”
Widths
Lengths
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
1”, 1-1/8”, 1-1/4”, 1-1/2”
2”, 4”, 6”, Custom
2”, 4”, 6”, Custom
2”, 4”, 6”, Custom
80 +/-5 Durometer EPDM/Silicone Rolls
Thickness
1/16”
1/8”
3/16”
1/4”
3/8”
1/2”
Add for PSA
Widths
1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4”,
1-1/2”, 2”, 3”, 4”
1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4”,
1-1/2”, 2”, 3”, 4”
1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4”,
1-1/2”, 2”, 3”, 4”
1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4”,
1-1/2”, 2”, 3”, 4”
1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4”,
1-1/2”, 2”, 3”, 4”
1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4”,
1-1/2”, 2”, 3”, 4”
1/2”, 5/8”, 3/4”, 1”, 1-1/8”, 1-1/4”,
1-1/2”, 2”, 3”, 4”
Lengths
50 ft
50 ft
50 ft
50 ft
50 ft
4 ft
Add for PSA
Minimum quantities will be required per order. Dense rolls with PSA application will be sold in stock lengths. Please call
for details.
Clear Mirror Setting Blocks
Thickness / Width / Length
1/16” x 1/4” x 2”
1/8” x 1/4” x 2”
1/4” x 1/4” x 2”
Custom sized setting blocks are
available . If you don’t see your
required size of block, please call for
pricing.
22
Anti-Walk Side Spacers (W Blocks) 80 +/-5 Duro. EPDM
Available
Widths
Widths
1/4”
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
7/8”
1”
1-1/8”
1-1/4”
1-1/2”
The Anti-Walk Side Spacers will be priced per 100 pieces. A minimum order of $50.00 is required.
Available with 1/8” wall. Other cut sizes are available upon request. W Blocks can also be made in
Santoprene and Silicone.
*Drawings Not To Scale.
Anti-Walk or “W” Spacers are used on the perimeter of storefront glass to prevent “walking” due to
vibration, temperature and wind variation. Glass to metal contact leads to breakage and subsequent air
and water leakage. The Anti-Walk or “W” Spacers is self supporting and prevents this from happening.
Simply follow these instructions:
1) Cut the spacer to a length that considers the depth of your pocket minus the “bite” of the glass minus
1/8”. 2) Slip the spacer past the glass bite. 3) The spacer will then assume a “Locked” position.
EPDM Anti-Walk Side Spacers Discount Schedule
2,500 pieces per size.................................................................................................................................................Less 10%
5,000 pieces per size.................................................................................................................................................Less 15%
10,000 pieces per size.....................................................................................................................................Call For Quote
23
Light Density PVC Foam Tape
With Pressure Sensitive Adhesive On One Side
Minimum Order: One Standard Case.
Series
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
PVC 710
Thickness
& Width
Quantity Per Case
Rolls
Feet
1/16” x 1/4”
1/16” x 3/8”
1/16” x 1/2”
1/16” x 3/4”
1/16” x 1”
1/8” x 3/8”
1/8” x 1/2”
1/8” x 3/4”
1/8” x 1”
3/16” x 3/8”
3/16” x 1/2”
3/16” x 3/4”
3/16” x 1”
1/4” x 3/8”
1/4” x 1/2”
1/4” x 3/4”
1/4” x 1”
3/8” x 3/8”
3/8” x 1/2”
3/8” x 3/4”
3/8” x 1”
1/2” x 1/2”
1/2” x 3/4”
1/2” x 1”
72
48
36
24
18
48
36
24
18
48
36
24
18
48
36
24
18
48
36
24
18
36
24
18
100’/7200’
100’/4800’
100’/3600’
100’/2400’
100’/1800’
100’/4800’
100’/3600’
100’/2400’
100’/1800’
50’/2400’
50’/1800’
50’/1200’
50’/900’
50’/2400’
50’/1800’
50’/1200’
50’/900’
25’/1200’
25’/900’
25’/600’
25’/450’
25’/900’
25’/600’
25’/450’
Light density PVC foam tape is AAMA approved under the 810.1-85 specification.
Color: .................................................................................. Black/White
Density: ............................................................................................ 7 Lbs
Liner: ................................................................................ Polypropylen
Compress/Deflect: ........................................................................... 3.6
Water Absorption: ...................................................... 3% by Weight
Force to Compress (psi): ................................................................ 3.6
Tensile Strength:............................................................................30psi
Tape Discount Schedule
Less than 10,000 feet ........................................................... List Price
10,000 to 25,000 feet ............................................................. Less 5%
25,000 to 50,000 feet ........................................................... Less 10%
More than 50,000 feet ........................................... Call For Quote
24
Polyolefin Glazing Tape
With Pressure Sensitive Adhesive On Two Sides
F971
F971
F971
F971
F971
F971
F971
F972
F972
F972
F972
F972
F972
F972
F974
F974
F974
F974
F974
F974
F974
Thickness
& Width
1/32” x 1/4”
1/32” x 3/8”
1/32” x 1/2”
1/32” x 5/8”
1/32” x 3/4”
1/32” x 7/8”
1/32” x 1”
1/16” x 1/4”
1/16” x 3/8”
1/16” x 1/2”
1/16” x 5/8”
1/16” x 3/4”
1/16” x 7/8”
1/16” x 1”
1/8” x 1/4”
1/8” x 3/8”
1/8” x 1/2”
1/8” x 5/8”
1/8” x 3/4”
1/8” x 7/8”
1/8” x 1”
Quantity Per Case
Rolls
Feet
72
48
36
29
24
20
18
72
48
36
29
24
20
18
72
48
36
29
24
20
18
216’/15552’
216’/10368’
216’/7776’
216’/6264’
216’/5184’
216’/4320’
216’/3888’
108’/7776’
108’/5184’
108’/3888’
108’/3132’
108’/2592’
108’/2160’
108’/1944’
54’/3888’
54’/2592’
54’/1944’
54’/1566’
54’/1296’
54’/1080’
54’/972’
This glazing tape is AAMA approved under the 810.1-92 specification. Notes: This tape was developed with an aggressive
acrylic adhesive system for optimum compatibility to a variety of sash materials (eg. Treated wood, vinyl and aluminum
sash materials), while the liner side is used to seal light surfaces. This tape is also compatible with acrylic and polycarbonate
materials.
Color: .................................................................................. Black/White
Density: ....................................................................................... 4-6 Lbs
Liner: .............................................................................. Polypropylene
Compress/Strength: ................................................ 10.35 (psi 25%)
Force to Compress (psi): ................................................................. 10
Tensile Strength: ....................................................................... 70-130
Elongation at Break (%): ...................................................... 180-220
10,000 to 25,000 feet ............................................................. Less 5%
25,000 to 50,000 feet ........................................................... Less 10%
Series
25
Structural Thermalbond Tape
Series
V2204
V2204
V2204
V2204
V2204
V2206
V2206
V2206
V2206
V2206
V2208
V2208
V2208
V2208
V2208
V2212
V2212
V2212
V2212
Thickness
& Width
1/8” x 1/4”
1/8” x 3/8”
1/8” x 1/2”
1/8” x 3/4”
1/8” x 1”
3/16” x 1/4”
3/16” x 3/8”
3/16” x 1/2”
3/16” x 3/4”
3/16” x 1”
1/4” x 1/4”
1/4” x 3/8”
1/4” x 1/2”
1/4” x 3/4”
1/4” x 1”
3/8” x 3/8”
3/8” x 1/2”
3/8” x 3/4”
3/8” x 1”
Quantity Per Case
Rolls
Feet
72
50’/3600’
48
50’/2400’
36
50’/1800’
24
50’/1200’
18
50’/900’
72
50’/3600’
48
50’/2400’
36
50’/1800’
24
50’/1200’
18
50’/900’
72
50’/3600’
48
50’/2400’
36
50’/1800’
24
50’/1200’
18
50’/900’
48
25’/1200’
36
25’/900’
24
25’/600’
18
25’/450’
This tape is a medium density vinyl foam coated (two sides) with solvent-based acrylic pressure sensitive adhesive. It is
designed for structural silicone curtainwall applications as well as others that rely on costly high density urethane gasketing
for spacing, vibration, dampening or cushioning. To be used as a spacer only until the silicone sealant sets up. For indoor
application only to hold out the light.
Color: ............................................................................................... Black
Density: .......................................................................................... 20 Lb
Liner: ................................................................................. Polyethylene
Elongation: ............................................................................... 120.00
Tensile Strength: .............................................................................. 150
Force to Compress (psi): ........................................................... 19-2
Tear Strength: .............................................................................. 25min
Static Sheer Adhesion (hrs): ................................................... 1000+
Service Temperature: ................................................. 40oF to 180oF
10,000 to 25,000 feet ............................................................. Less 5%
25,000 to 50,000 feet ........................................................... Less 10%
26
Cords and Tubing
GRP produces a variety of cords and tubing for any type of application: Silicones, EPDM, PVC, and
sponges. Minimum order is one standard box. Larger quantities can be packaged on wooden (large)
spools if required.
Package
.125”
1,000’
.188”
1,000’
.250”
1,000’
.312”
1,000’
.375”
500’
.437”
500’
.500”
500’
.625”
400’
.750”
400’
.875”
300’
1.00”
300’
Call for Pricing
Minimum order - one standard box.
Open Cell Weep Baffles
30 PPI-PVC Coated Polyurethane Foam
Thickness
Widths
Lengths
1/2”
1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”, 1-1/2”
Any Size
3/4”
1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”, 1-1/2”
Any Size
1”
1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”, 1-1/2”
Any Size
Please Call for Pricing or Request a Quote Online Other sizes available upon request so don’t hesitate to call for a quote.
Minimum order of $50.00 required.
Diameter
27
Plastic Horseshoe Shims
Series No.
Test data is available on request.
16
18
14
26
28
24
36
38
34
56
58
54
Length
Width
Key
Slot
2”
1 1/2”
1/2”
3”
2 5/16”
13/16”
3 1/2”
1 1/2”
1/2”
4”
3”
13/16”
Thickness
Color
Pieces per
Box
1/16”
1/8”
1/4”
1/16”
1/8”
1/4”
1/16”
1/8”
1/4”
1/16”
1/8”
1/4”
Blue
Red
Black
Blue
Red
Black
Blue
Red
Black
Blue
Red
Black
1,000
1,000
1,000
1,000
1,000
500
1,000
1,000
500
500
500
400
G
Notes: Glazing Rubber Products Plastic Horseshoe Shims are made to simplify leveling problems
wherever they may occur. Applications for GRP Horseshoe Shims include installation of windows,
doors, curtainwalls, storefronts and insulated glass units. GRP Horseshoe Shims are molded from a
fire retardant engineered co-polymer plastic. They are classed as slow burning with no toxic fumes.
They have a compressive strength of 10 to 12,000 psi with no fracture even at 35,000 psi.
28
Stack Shims
Stack shims allow up to 5 length adjustments and up to 16 thickness adjustments. 3-1/2” and 4-1/4”
lengths are available. 16 shims are heat sealed into 1” inch stacks. Fire resistant, will not rust, stain or
leach.
• Adjustable Heights
• Conveniently Packaged
• Easy to Install
• Adjustable Lengths
• Available in Two Sizes
• Time and Labor Saving
Series No.
A
B
C
D
Standard Package
SS16
3-1/2”
1-15/16”
5/8”
1/2”
1008 pcs.
SS16L
4-1/4”
1-15/16”
5/8”
1/2”
1008 pcs.
B
D
G
A
29
C
EPDM & Silicone U-Channels
D
B
A
Series No.
Part No.
Pkg
A
B
C
D
0063-00EUC
80SIL-1072-500F
80EPD-1072-500F
500’
0.125”
0.250”
0.625”
0.03125”
0093-00EUC
80SIL-1082-500F
80EPD-1082-500F
500’
0.188”
0.375”
0.093”
0.0475”
0125-00EUC
80SIL-1083-500F
80EPD-1083-500F
500’
0.250”
0.275”
0.125”
0.062”
0188-00EUC
80SIL-0821-400F
80EPD-0821-400F
400’
0.375”
0.437”
0.188”
0.0935”
0981-00EUC
80SIL-0981-400F
80EPD-0981-400F
400’
0.437”
0.531”
0.250”
0.0935”
0313-00EUC
80SIL-0999-400F
80EPD-0999-400F
400’
0.500”
0.593”
0.313”
0.125”
0375-00EUC
80SIL-0832-250F
80EPD-0832-250F
250’
0.625”
0.750”
0.375”
0.125”
0346-00EUC
80SIL-0346-250F
80EPD-0346-250F
250’
0.750”
0.875”
0.500”
0.125”
0625-00EUC
80SIL-1084-250F
80EPD-1084-250F
250’
0.875”
1.000”
0.625”
0.125”
0750-00EUC
80SIL-1085-100F
80EPD-1085-100F
100’
1.000”
1.000”
0.750”
0.125”
0875-00EUC
80SIL-0135-100F
80EPD-0135-100F
100’
1.125”
1.125”
0.875”
0.125”
0918-00EUC
80SIL-0918-100F
80EPD-0918-100F
100’
1.250”
1.250”
1.000”
0.125”
Please Call for Pricing or Request a Quote Online
Material Standards for EPDM
Material Standards for Silicone
Color:......................................................................... Black
Hardness, Shore A: ...................................................... 82
Compression: ......................................................... 27.8%
Tensile Strength: ....................................................... 1820
Elongation at Rupture: ............................................. 300
Tear Strength: ............................................................... 218
Non-Staining: ........................ No Migratory Staining
Flame Propagation: ........................ >1 inch, No Limit
Color: ........................................................................... Black
Durometer: .............................................................. 80-85
Tensile Strength: ...................................................... 1,297
Elongation: .............................................................. 213.97
Specific Gravity: .......................................................... 1.49
Low Temperature: .......................................... No Failure
Compression: ............................................................. 18%
Flame Propagation: .................................................. Pass
30
Terms and Conditions of Sale
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY. THERE IS IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS, AS
WELL AS LIMITATIONS AND EXCLUSIONS THAT APPLY TO GLAZING RUBBER PRODUCTS OF GEORGIA, INC.’S SALE OF GOODS, SERVICES AND MATERIALS.
The following terms and conditions (the “Terms”) are incorporated by reference into all written Glazing Rubber Products of Georgia, Inc. (“GRP”) sales
orders or quotes (“Quotes”) as if expressly set forth therein. By accepting our Quote, you are indicating your acceptance of the following Terms. GRP
reserves the right to make changes to this web site and these Terms at any time, so please check the web site periodically.
1. ACCEPTANCE: GRP recognizes you may desire to use your own form of acknowledgment or acceptance of a Quote. However, the use of any such form
shall be for your convenience only. No modification of the Terms shall be effected by the acknowledgment or acceptance of a purchase order, shipping
instruction form, bill of lading, or any other document containing terms or conditions at variance with or in addition to those set forth herein. All such
varying or additional terms are hereby objected to and rejected by GRP and deemed waived by you. BY ORDERING FOR SHIPMENT ANY PRODUCT UNDER
A QUOTE FROM GRP YOU AGREE TO ALL THE TERMS CONTAINED HEREIN. Furthermore, you shall be deemed to have accepted the product and agreed
that the product is free from all defects in materials and workmanship and conforms in all material respects to your technical specifications upon the earlier
of (a) the date of installation of the product or (b) three (3) days following the delivery of the product.
2. PRICE – PAYMENT
a. All prices quoted by GRP are good as of the date of the Quote and for a period of thirty (30) days thereafter.
b. GRP shall have the continuing right to approve Buyer’s credit. GRP may at any time demand advance payment, satisfactory security or a guarantee of
prompt payment, and if such is refused, GRP may terminate this Agreement, refuse to deliver any undelivered goods, and Buyer may immediately become
liable to GRP for the unpaid price of all goods delivered and for damages.
c. Buyer agrees to pay a service charge of one percent (1%) per month , commencing thirty (30) days following invoice. Buyer’s payments on overdue
invoices shall be applied first against accrued service charges. Buyer agrees to pay all of GRP’s costs of collection of overdue invoices, including reasonable
attorney’s fees.
3. DELIVERY: All products sold by GRP are delivered FOB Dawsonville, Georgia. You will take title to the products at GRP’s loading dock and all risk of loss
for the goods will pass to you at that point.
4. DAMAGES. TO THE MAXIMIMUM EXTENT PERMITTED BY APPLICABLE LAW, GRP’S SOLE LIABILITY IS EXPRESSLY LIMITED TO, AND SHALL IN NO EVENT
EXCEED, THE AMOUNTS RECEIVED BY GRP WITH RESPECT TO THE SPECIFIC DEFECTIVE MERCHANDISE. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, GRP DISCLAIMS ALL OTHER WARRANTIES, EXPRESS, IMPLIED STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, INTELLECTUAL PROPERTY INFRINGEMENT OR THIRD PARTY RIGHTS, OR BASED
ON COURSE OF CONDUCT OR TRADE CUSTOM OR USAGE, AND IN NO EVENT SHALL GRP BE LIABLE FOR ANY LOST PROFITS OR ANY CONSEQUENTIAL,
SPECIAL, INCIDENTAL, PUNITIVE, EXEMPLARY OR INDIRECT DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY ARISING FROM THE
RELATIONSHIP BETWEEN GRP AND YOU. THE PARTIES FURTHER AGREE THAT EACH AND EVERY PROVISION OF THIS AGREEMENT THAT PROVIDES FOR
A LIMITATION OF LIABILITY, DISCLAIMER OF WARRANTIES OR EXCLUSION OF DAMAGES IS EXPRESSLY INTENDED TO BE SEVERABLE AND INDEPENDENT
OF ANY OTHER PROVISION SINCE THOSE PROVISIONS REPRESENT SEPARATE ELEMENTS OF RISK ALLOCATION BETWEEN THE PARTIES AND SHALL BE
SEPARATELY ENFORCED. BUYER AGREES THAT THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY
LIMITED REMEDY.
5. ENTIRE AGREEMENT. This agreement constitutes the entire agreement between GRP and Buyer and supersedes all prior or contemporaneous promotional
material, contracts, agreements, statements, promises, representations, warranties, purchase orders or quotations, whether written or oral. These Terms and
Conditions may not be amended, altered or modified except in writing by an authorized signatory or Seller. No other purported additions, amendments,
alterations or modifications by Buyer or any other person, whether oral or written, shall be binding on GRP, regardless of GRP’s failure to object or GRP’s
shipment of products. In the event of a conflict between these Terms and Conditions and any other part of this Agreement, these Terms and Conditions
shall govern.
6. GOVERNING LAW, JURISDICTION, AND VENUE: This agreement shall be governed and construed according to the laws of the state of
Georgia, exclusive of conflicts of laws provisions that would permit or require the application of laws of a different jurisdiction. The 1980 United Nations
Convention of Contracts for International Sale of Goods hereunder shall not govern the rights or obligations of the parties. Buyer agrees that any action
for enforcement of this agreement or any other dispute arising hereunder shall be filed exclusively in courts sitting in Dawson County, Georgia, and buyer
hereby consents and waives any objection to the jurisdiction and venue of such courts and arbitrators. Any action hereunder for breach of warranty or
contract must be commenced not later than one year from the date on which such action accrues or be forever banned.
7. NOTICES. All notices, requests or other communications hereunder to GRP shall be in writing and shall be deemed to be duly given or made when
delivered to GRP to the attention of Steve Sanvi, President, at 71 Easy Street, Dawsonville, Georgia 30534. All notices, requests, or other communications
hereunder to You shall be in writing and shall be deemed to be duly given or made when delivered to You at the address provided by you for such purpose,
or if no such address has been provided, to the address shown on your purchase order.
32
71 Easy Street
Dawsonville, GA 30534
Fax 706.344.1463

Glazing Rubber Products, Inc.

Transcription

Similar documents

Welsh Safety Signs

the Berdick Fiberglass Windows Brochure

Porsche`s 911 GT2 provides one of the most

Custom Fitting Custom Fitting

Westeck Windows and Doors

BELLWIRE

PVC Window Catalogue

102015 NEW STUFF.pub - Funtastic Novelties

View property schedule

Custom Lemsteraak 12.80 - {ModelName} Charter Brochure