downlite - Rambusch Lighting
Transcription
downlite - Rambusch Lighting
DOWNLITE Gives a visually smooth spread of work lighting from various mounting positions, without distracting from the aesthetics of the space. RECESSED DOWNLITES Lamp 150 150 250 250 400 400 500 500 250 250 500 500 Watt Watt Watt Watt Watt Watt Watt Watt Watt Watt Watt Watt Quartz Quartz Quartz Quartz Quartz Quartz Quartz Quartz Quartz Quartz Quartz Quartz Beam Pattern 60° Beam 60° Beam 60° Beam 60° Beam 60° Beam 60° Beam 60° Beam 60° Beam 45° Beam 45° Beam 45° Beam 45° Beam Retrofit Kits Retrofit Kits D 100/150/200W A21 Softlite 100/150/200W A21 Softlite DOWNLITE OVERVIEW 150/250W PAR 38 Flood/Spot 150/250W PAR 38 Flood/Spot 500 Watt Quartz DOWNLITES 80° Beam 80° Beam Rectangular Catalog Number Page RD-60-150-LC or B (-T30) RD-60-150-M or CC (-T30) RD-60-250-LC or B (-T30) RD-60-250-M or CC (-T30) RD-60-400-LC or B (-T30) RD-60-400-M or CC (-T30) RD-60-500-LC or B (-T30) RD-60-500-M or CC (-T30) RD-45-250-LC or B (-T30) RD-45-250-M or CC (-T30) RD-45-500-LC or B (-T30) RD-45-500-M or CC (-T30) 101A 102A 101B 102B 103A 104A 103B 104B 105 106 107 108 RD-45/60-250 or 500-LC-T30-Modified RD-45/60-250 or 500-B-T30-Modified 110A 110B RD-A-100/150/200-A21-CC or M (-T30) RD-A-100/150/200-A21-LC or B (-T30) 131 132 RD-PAR-150/250-PAR38-CC or M (-T30) RD-PAR-150/250-PAR38-LC or B (-T30) 141 142 RD-HE-60-500-Q-LC or B 151 A variety of mounting systems are available: recessed, pendant, surface and bracket. (6 OPTICAL SYSTEMS) A 21 80° T4 Mini-can Quartz 45° PREVIOUS PAGE T4 Mini-can Quartz PENDANT/BRACKET/SURFACE MIOUNT DOWNLITES 150/250/500 Watt Quartz 150/250/500 Watt Quartz 45°or 60° 45°or 60° PD-45 or -60-150/250/500-Q BD-45 or -60-150/250/500-Q 121 121 100/150/200 Watt A21 Softlite 100/150/200 Watt A21 Softlite 100/150/200 Watt A21 Softlite PD-A-100/150/200-A21 BD-A-100/150/200-A21 SD-A-100/150/200-A21 133 133 133 100/250 Watt PAR38 Flood/Spot 100/250 Watt PAR38 Flood/Spot PD-PAR-150/250-PAR38 BD-PAR-150/250-PAR38 144 144 60° NEXT ® Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *7.5 foot minimum ceiling height twist-loc Application: The Rambusch RD-60-150 with twist-loc or minimum-trim baffle has been designed specifically for use in medium to high ceiling areas (7.5 foot minimum). The extremely high efficiency (72.6%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and annular baffling. The RD-60-150 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Twist-Loc Recessed Downlite RD-60-150-Q-LC plaster ring including flanges face plate diameter aperture diameter height 97/8” 8” 5” 12” minimum-trim baffle NOTE: notch ceiling material so that the minimum trim (“B-PAN”) will sit flush with ceiling line. Minimum-Trim Baffle Recessed Downlite RD-60-150-Q-B 0-30° Tilt Twist-Loc Recessed Downlite RD-60-150-Q-LC-T30 face plate diameter aperture diameter height plaster ring including flanges face plate diameter aperture diameter height 6” 5” 12” 150 Watt Quartz 60° Beam Recessed Downlite Twist-loc & Mini-baffle wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector . socket Heavy-duty type S-25X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. twist-loc Die cast aluminum, 8” diameter, with 5” diameter chamfered aperture. Sloping ramps on frame engage lugs on lower body for fast installation from above or below. Reversible mounting frame; flange up for wet construction, and down for existing ceilings. minimum-trim baffle die formed steel mounting frame with removable ceiling trim. finish Exterior and interior baffle, section-baked high temperature black. Face plate and trim, baked white enamel. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twist-loc unit may be installed from below. For mounting details see installation sheet. lamp USHIO AMERICA 150 watt/T4 Frosted mini-can screw base maximum Lamp Catalog #215-101/ (1000378) 0-30° Tilt Minimum-Trim Baffle Recessed Downlite RD-60-150-Q-B-T30 97/8” 8” 5” 131/4” face plate diameter aperture diameter height 6” 5” 141/4” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Page 101 A NEXT> ® Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *12.0 foot minimum ceiling height twist-loc Application: The Rambusch RD-60-250 with twist-loc or minimum-trim baffle has been designed specifically for use in medium to high ceiling areas (12.0 foot minimum). The extremely high efficiency (70.4%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and annular baffling. The RD-60-250 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Twist-Loc Recessed Downlite RD-60-250-Q-LC plaster ring including flanges face plate diameter aperture diameter height 97/8” 8” 5” 12” minimum-trim baffle NOTE: notch ceiling material so that the minimum trim (“B-PAN”) will sit flush with ceiling line. Minimum-Trim Baffle Recessed Downlite RD-60-250-Q-B 0-30° Tilt Twist-Loc Recessed Downlite RD-60-250-Q-LC-T30 face plate diameter aperture diameter height plaster ring including flanges face plate diameter aperture diameter height 6” 5” 12” 250 Watt Quartz 60° Beam Recessed Downlite Twist-loc & Mini-baffle wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector . socket Heavy-duty type S-25X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. twist-loc Die cast aluminum, 8” diameter, with 5” diameter chamfered aperture. Sloping ramps on frame engage lugs on lower body for fast installation from above or below. Reversible mounting frame; flange up for wet construction, and down for existing ceilings. minimum-trim baffle die formed steel mounting frame with removable ceiling trim. finish Exterior and interior baffle, section-baked high temperature black. Face plate and trim, baked white enamel. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twistloc unit may be installed from below. For mounting details see installation sheet. lamp USHIO AMERICA 250 watt/T4 Frosted mini-can screw base maximum Lamp Catalog #215-102/ (1000360) 0-30° Tilt Minimum-Trim Baffle Recessed Downlite RD-60-250-Q-B-T30 97/8” 8” 5” 131/4” face plate diameter aperture diameter height 6” 5” 141/4” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Page 101 B NEXT> 150 Watt Quartz 60° Beam Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *7.5 foot minimum ceiling height The Rambusch RD-60-150 with conoid or multi-groove baffle has been designed specifically for use in medium to high ceiling areas (7.5 foot minimum). The extremely high efficiency (69.3%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and annular baffling. The RD-60-150 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Conoid Recessed Downlite RD-60-150-Q-CC* flange o.d. aperture diameter height wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector. socket Heavy-duty type S-25X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. conoid Hydro-formed aluminum cone. Specular finish, color as specified. Clear Alzak standard. multi groove Grooved hydroformed aluminum, matte black finish finish Exterior and interior baffle, section-baked high temperature black. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twistloc unit may be installed from below. For mounting details see installation sheet. lamp USHIO AMERICA 150 watt/T4 Frosted mini-can screw base maximum Lamp Catalog #215-101/ (1000378) conoid Application: multi-groove Multi-Groove Recessed Downlite RD-60-150-Q-M 6” 5” 12” flange o.d. aperture diameter height Recessed Downlite Conoid & Multi-Groove 6” 5” 12” 0-30° Tilt Conoid Recessed Downlite RD-60-150-Q-CC*-T30 0-30° Tilt Multi-Groove Recessed Downlite RD-60-150-Q-M-T30 flange o.d. aperture diameter height flange o.d. aperture diameter height 6” 5” 131/4” 6” 5” 141/4” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Page 102 A NEXT> 250 Watt Quartz 60° Beam Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *12.0 foot minimum ceiling height The Rambusch RD-60-250 with conoid or multi-groove baffle has been designed specifically for use in medium to high ceiling areas (12.0 foot minimum). The extremely high efficiency (70.4%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and annular baffling. The RD-60-250 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Conoid Recessed Downlite RD-60-250-Q-CC* flange o.d. aperture diameter height wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector. socket Heavy-duty type S-25X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. conoid Hydro-formed aluminum cone. Specular finish, color as specified. Clear Alzak standard multi groove Grooved hydroformed aluminum, matte black finish finish Exterior and interior baffle, section-baked high temperature black. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twistloc unit may be installed from below. For mounting details see installation sheet. lamp USHIO AMERICA 250 watt/T4 Frosted mini-can screw base maximum Lamp Catalog #215-102/ (1000360) conoid Application: multi-groove Multi-Groove Recessed Downlite RD-60-250-Q-M 6” 5” 12” flange o.d. aperture diameter height Recessed Downlite Conoid & Multi-Groove 6” 5” 12” 0-30° Tilt Conoid Recessed Downlite RD-60-250-Q-CC*-T30 0-30° Tilt Multi-Groove Recessed Downlite RD-60-250-Q-M-T30 flange o.d. aperture diameter height flange o.d. aperture diameter height 6” 5” 131/4” 6” 5” 141/4” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Page 102 B NEXT> 400 Watt Quartz 60° Beam Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *17.0 foot minimum ceiling height Application: The Rambusch RD-60-400 with twist-loc or minimum-trim baffle has been designed specifically for use in medium to high ceiling areas (17.0 foot minimum). The extremely high efficiency (69.3%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and annular baffling. The RD-60-400 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Twist-Loc Recessed Downlite RD-60-400-Q-LC plaster ring including flanges face plate diameter aperture diameter height 97/8” 8” 5” 161/4” twist-loc minimum-trim baffle NOTE: notch ceiling material so that the minimum trim (“B-PAN”) will sit flush with ceiling line. Minimum-Trim Baffle Recessed Downlite RD-60-400-Q-B 0-30° Tilt Twist-Loc Recessed Downlite RD-60-400-Q-LC-T30 face plate diameter aperture diameter height plaster ring including flanges face plate diameter aperture diameter height 6” 5” 161/4” Recessed Downlite Twist-loc & Mini-baffle wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector . socket Heavy-duty type S-25X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. twist-loc Die cast aluminum, 8” diameter, with 5” diameter chamfered aperture. Sloping ramps on frame engage lugs on lower body for fast installation from above or below. Reversible mounting frame; flange up for wet construction, and down for existing ceilings. minimum-trim baffle die formed steel mounting frame with removable ceiling trim. finish Exterior and interior baffle, section-baked high temperature black. Face plate and trim, baked white enamel. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twist-loc unit may be installed from below. For mounting details see installation sheet. lamp: USHIO AMERICA 400 watt / T4 Frosted mini-can screw base maximum Lamp Catalog #215-103/ (1000977) 0-30° Tilt Minimum-Trim Baffle Recessed Downlite RD-60-400-Q-B-T30 97/8” 8” 5” 171/2” face plate diameter aperture diameter height 6” 5” 181/2” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Page 103 A NEXT> 500 Watt Quartz 60° Beam Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *17.0 foot minimum ceiling height Application: The Rambusch RD-60-500 with twist-loc or minimum-trim baffle has been designed specifically for use in medium to high ceiling areas (17.0 foot minimum). The extremely high efficiency (65.1%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and annular baffling. The RD-60-500 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Twist-Loc Recessed Downlite RD-60-500-Q-LC plaster ring including flanges face plate diameter aperture diameter height 97/8” 8” 5” 161/4” twist-loc minimum-trim baffle NOTE: notch ceiling material so that the minimum trim (“B-PAN”) will sit flush with ceiling line. Minimum-Trim Baffle Recessed Downlite RD-60-500-Q-B 0-30° Tilt Twist-Loc Recessed Downlite RD-60-500-Q-LC-T30 face plate diameter aperture diameter height plaster ring including flanges face plate diameter aperture diameter height 6” 5” 161/4” Recessed Downlite Twist-loc & Mini-baffle wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector . socket Heavy-duty type S-25X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. twist-loc Die cast aluminum, 8” diameter, with 5” diameter chamfered aperture. Sloping ramps on frame engage lugs on lower body for fast installation from above or below. Reversible mounting frame; flange up for wet construction, and down for existing ceilings. minimum-trim baffle die formed steel mounting frame with removable ceiling trim. finish Exterior and interior baffle, section-baked high temperature black. Face plate and trim, baked white enamel. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twistloc unit may be installed from below. For mounting details see installation sheet. lamp USHIO AMERICA 500 watt / T4 Frosted mini-can screw base maximum Lamp Catalog #215-104/ (1000466 0-30° Tilt Minimum-Trim Baffle Recessed Downlite RD-60-500-Q-B-T30 97/8” 8” 5” 171/2” face plate diameter aperture diameter height 6” 5” 181/2” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Page 103 B NEXT> 400 Watt Quartz 60° Beam Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *17.0 foot minimum ceiling height wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector. socket Heavy-duty type S-25X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. conoid Hydro-formed aluminum cone. Specular finish, color as specified. Clear Alzak standard multi groove Grooved hydroformed aluminum, matte black finish finish Exterior and interior baffle, section-baked high temperature black. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twistloc unit may be installed from below. For mounting details see installation sheet. lamp: USHIO AMERICA 400 watt / T4 Frosted mini-can screw base maximum Lamp Catalog #215-103/ (1000977) Application: The Rambusch RD-60-400 with conoid or multi-groove baffle has been designed specifically for use in medium to high ceiling areas (17.0 foot minimum). The extremely high efficiency (69.3%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and annular baffling. The RD-60-400 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Conoid Recessed Downlite RD-60-400-Q-CC* flange o.d. aperture diameter height conoid multi-groove Multi-Groove Recessed Downlite RD-60-400-Q-M 6” 5” 16 1/4” flange o.d. aperture diameter height Recessed Downlite Conoid & Multi-Groove 6” 5” 16 1/4” 0-30° Tilt Conoid Recessed Downlite RD-60-400-Q-CC*-T30 0-30° Tilt Multi-Groove Recessed Downlite RD-60-400-Q-M-T30 flange o.d. aperture diameter height flange o.d. aperture diameter height 6” 5” 18 1/2” 6” 5” 18 1/2” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Page 104 A NEXT> 500 Watt Quartz 60° Beam Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector. socket Heavy-duty type S-25.X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. conoid Hydro-formed aluminum cone. Specular finish, color as specified. Clear Alzak standard multi groove Grooved hydroformed aluminum, matte black finish finish Exterior and interior baffle, section-baked high temperature black. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twistloc unit may be installed from below. For mounting details see installation sheet. lamp USHIO AMERICA 500 watt / T4 Frosted mini-can screw base maximum Lamp Catalog #215-104/ (1000466) *17.0 foot minimum ceiling height Application: The Rambusch RD-60-500 with conoid or multi-groove baffle has been designed specifically for use in medium to high ceiling areas (17.0 foot minimum). The extremely high efficiency (65.1%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and annular baffling. The RD-60-500 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Conoid Recessed Downlite RD-60-500-Q-CC* flange o.d. aperture diameter height conoid multi-groove Multi-Groove Recessed Downlite RD-60-500-Q-M 6” 5” 16 1/4” flange o.d. aperture diameter height Recessed Downlite Conoid & Multi-Groove 6” 5” 16 1/4” 0-30° Tilt Conoid Recessed Downlite RD-60-500-Q-CC*-T30 0-30° Tilt Multi-Groove Recessed Downlite RD-60-500-Q-M-T30 flange o.d. aperture diameter height flange o.d. aperture diameter height 6” 5” 18 1/2” 6” 5” 18 1/2” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Page 104 B NEXT> ® Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *17.0 foot minimum ceiling height Application: twist-loc The Rambusch RD-45-250 with twist-loc or minimum-trim baffle has been designed specifically for use in low to medium ceiling areas (17.0 foot minimum). The extremely high efficiency (72.1%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and annular baffling. The RD-45-250 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Twist-Loc Recessed Downlite RD-45-250-Q-LC plaster ring including flanges face plate diameter aperture diameter height 97/8” 8” 5” 12” minimum-trim baffle NOTE: notch ceiling material so that the minimum trim (“B-PAN”) will sit flush with ceiling line. Minimum-Trim Baffle Recessed Downlite RD-45-250-Q-B 0-30° Tilt Twist-Loc Recessed Downlite RD-45-250-Q-LC-T30 face plate diameter aperture diameter height plaster ring including flanges face plate diameter aperture diameter height 6” 5” 12” 250 Watt Quartz 45° Beam Recessed Downlite Twist-loc & Mini-baffle wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector . socket Heavy-duty type S-25X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. twist-loc Die cast aluminum, 8” diameter, with 5” diameter chamfered aperture. Sloping ramps on frame engage lugs on lower body for fast installation from above or below. Reversible mounting frame; flange up for wet construction, and down for existing ceilings. minimum-trim baffle die formed steel mounting frame with removable ceiling trim. finish Exterior and interior baffle, section-baked high temperature black. Face plate and trim, baked white enamel. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twistloc unit may be installed from below. For mounting details see installation sheet. lamp USHIO AMERICA 250 watt/T4 Frosted mini-can screw base maximum Lamp Catalog #215-102/ (1000360) 0-30° Tilt Minimum-Trim Baffle Recessed Downlite RD-45-250-Q-B-T30 97/8” 8” 5” 131/4” face plate diameter aperture diameter height 6” 5” 141/4” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Page 105 NEXT> 250 Watt Quartz 45° Beam Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *17.0 foot minimum ceiling height The Rambusch RD-45-250 with conoid or multi-groove baffle has been designed specifically for use in medium to high ceiling areas (17.0 foot minimum). The extremely high efficiency (72.1%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and annular baffling. The RD-45-250 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Conoid Recessed Downlite RD-45-250-Q-CC* flange o.d. aperture diameter height wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector. socket Heavy-duty type S-25X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. conoid Hydro-formed aluminum cone. Specular finish, color as specified. Clear Alzak standard multi groove Grooved hydroformed aluminum, matte black finish finish Exterior and interior baffle, section-baked high temperature black. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twistloc unit may be installed from below. For mounting details see installation sheet. lamp USHIO AMERICA 250 watt/T4 Frosted mini-can screw base maximum Lamp Catalog #215-102/ (1000360) conoid Application: multi-groove Multi-Groove Recessed Downlite RD-45-250-Q-M 6” 5” 12” flange o.d. aperture diameter height Recessed Downlite Conoid & Multi-Groove 6” 5” 12” 0-30° Tilt Conoid Recessed Downlite RD-45-250-Q-CC*-T30 0-30° Tilt Multi-Groove Recessed Downlite RD-45-250-Q-M-T30 flange o.d. aperture diameter height flange o.d. aperture diameter height 6” 5” 131/4” 6” 5” 141/4” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Page 106 NEXT> 500 Watt Quartz 45° Beam Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *22.0 foot minimum ceiling height Application: The Rambusch RD-45-500 with twist-loc or minimum-trim baffle has been designed specifically for use in medium to high ceiling areas (22.0 foot minimum). The extremely high efficiency (71.0%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and annular baffling. The RD-45-500 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Twist-Loc Recessed Downlite RD-45-500-Q-LC plaster ring including flanges face plate diameter aperture diameter height 97/8” 8” 5” 161/4” twist-loc minimum-trim baffle NOTE: notch ceiling material so that the minimum trim (“B-PAN”) will sit flush with ceiling line. Minimum-Trim Baffle Recessed Downlite RD-45-500-Q-B 0-30° Tilt Twist-Loc Recessed Downlite RD-45-500-Q-LC-T30 face plate diameter aperture diameter height plaster ring including flanges face plate diameter aperture diameter height 6” 5” 161/4” Recessed Downlite Twist-loc & Mini-baffle wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector . socket Heavy-duty type S-25X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. twist-loc Die cast aluminum, 8” diameter, with 5” diameter chamfered aperture. Sloping ramps on frame engage lugs on lower body for fast installation from above or below. Reversible mounting frame; flange up for wet construction, and down for existing ceilings. minimum-trim baffle die formed steel mounting frame with removable ceiling trim. finish Exterior and interior baffle, section-baked high temperature black. Face plate and trim, baked white enamel. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twistloc unit may be installed from below. For mounting details see installation sheet. lamp USHIO AMERICA 500 watt / T4 Frosted mini-can screw base maximum Lamp Catalog #215-104/ (1000466 0-30° Tilt Minimum-Trim Baffle Recessed Downlite RD-45-500-Q-B-T30 97/8” 8” 5” 171/2” face plate diameter aperture diameter height 6” 5” 181/2” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Project Specifics Page 107 NEXT> 500 Watt Quartz 45° Beam Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector. socket Heavy-duty type S-25.X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. conoid Hydro-formed aluminum cone. Specular finish, color as specified. Clear Alzak standard multi groove Grooved hydroformed aluminum, matte black finish finish Exterior and interior baffle, section-baked high temperature black. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twistloc unit may be installed from below. For mounting details see installation sheet. lamp USHIO AMERICA 500 watt / T4 Frosted mini-can screw base maximum Lamp Catalog #215-104/ (1000466) *22.0 foot minimum ceiling height Application: The Rambusch RD-45-500 with conoid or multi-groove baffle has been designed specifically for use in medium to high ceiling areas (22.0 foot minimum). The extremely high efficiency (71.0%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and annular baffling. The RD-45-500 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Conoid Recessed Downlite RD-45-500-Q-CC* flange o.d. aperture diameter height conoid multi-groove Multi-Groove Recessed Downlite RD-45-500-Q-M 6” 5” 16 1/4” flange o.d. aperture diameter height Recessed Downlite Conoid & Multi-Groove 6” 5” 16 1/4” 0-30° Tilt Conoid Recessed Downlite RD-45-500-Q-CC*-T30 0-30° Tilt Multi-Groove Recessed Downlite RD-45-500-Q-M-T30 flange o.d. aperture diameter height flange o.d. aperture diameter height 6” 5” 18 1/2” 6” 5” 18 1/2” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Project Specifics Page 108 NEXT> RD-Q THE STANDARD FOR ARCHITECTURAL SPACE SINCE 1898 < PREVIOUS PAGE NEXT JORDAN HALL AT NEC Lighting Designer: Charles Cosler Theater Consultation & Stage Design Architect: Ann Beha & Associates, Architects Objectives: To provide an even level of dimmable soft lighting for the stage and house areas of this historic concert hall. It was critical that there be as few fixtures as possible to avoid distracting the audience or to detract from the beautiful and historic ceilings. Execution: By using a recessed, highly effective quartz downlight, which has a standard 5” aperture, the designer was able to provide the needed level of illumination. By using a tilt, the slope of the ceiling could be compensated as well as the fixtures could be tilted slightly forward so the viewers below could not look directly into the light source. The light was warmed by using a gold reflector. Results: An even light level was achieved in addition to having the flexibility of the dimming, full color spectrum of light , and extended lamp life that comes with the use of tungsten-halogen lamp source. The concert hall, both house areas and main stage, have the needed light levels without detracting or impacting the historic architectural space. Fixtures: RD-45-500-Q-T30-B Rambusch Lighting Design Studios: 40 West 13th Street, New York, NY 10011-7989 • (212) 620-4687 • Fax: (212) 620-4687 Workshops: 218-230 South Parkway, Clifton, New Jersey 07014-1314 • (201) 778-8899 • Fax: (201) 778-0072 PREVIOUS PAGE NEXT RD-45/60-500-Q-LC-T30-Modified Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 RD-45/60-250-Q-LC-T30-Modified NEXT> Retrofit Kits: <PREVIOUS PAGE RD-45/60-250-Q-LC-T30Modified RD-45/60-500-Q-LC-T30Modified Page 110 A There are many thousands of old style incandescent downlites made between 1936 and 1968 by Rambusch, Century, Kliegel and others. Rambusch has a conversion kit, standard being for Rambusch, that leaves the ceiling mounting ring and plate in place. It also utilizes the same wiring, but changes the fixture itself, using the tungsten-halogen lamp. The result is either a substantial increase of the original intended light output, or a cut in half of the power consumed. Lamp life goes from c.750 hours to c.2,000 or c.4-5,000 if 130-volt lamp is used. Being a tungsten-halogen lamp means the original continuous spectrum fine-color rendition that is most easily dimmed. Gas discharge lamps do not easily or effectively dim, resulting in ballast noise (humming) as well as monochromatic-distorted colors. 1/00 There are many thousands of old style incandescent downlites made between 1936 and 1968 by Rambusch, Century, Kliegel and others. Rambusch has a conversion kit, standard being for Rambusch, that leaves the ceiling mounting ring and plate in place. It also utilizes the same wiring, but changes the fixture itself, using the tungsten-halogen lamp. The result is either a substantial increase of the original intended light output, or a cut in half of the power consumed. Lamp life goes from c.750 hours to c.2,000 or c.4-5,000 if 130-volt lamp is used. Being a tungsten-halogen lamp means the original continuous spectrum fine-color rendition that is most easily dimmed. Gas discharge lamps do not easily or effectively dim, resulting in ballast noise (humming) as well as monochromatic-distorted colors. <PREVIOUS PAGE NEXT> © 2000 Rambusch Lighting, NY RD-45/60-500-Q-B-T30-Modified Page 110 B Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 RD-45/60-250-Q-LC-T30Modified RD-45/60-500-Q-LC-T30Modified Retrofit Kits: RD-45/60-250-Q-B-T30-Modified < PREVIOUS PAGE NEXT OUR LADY OF ANGELS Chapel Baltimore, MD Architect: Kelly, Clayton & Mojescak Interior: Francis Gibbons Engineer: Spears Votta & Associates Lighting Designer: Bruce Dunlop The interior of this house of worship, like many, is a complex space. It requires having to create an environment in which an atmosphere of worship and meditation is fostered, while permitting the reading of prayer books and hymnals. The careful renovation of this rich traditional space included the refitting of the Church’s existing Rambusch lighting system of dome lights and architectural uplites. Newer, more powerful and efficient fixtures allowed for a higher level of illumination which enhanced its architectural detail without distracting from its function for the congregation and their religious activities. RD-60-500-Q-T30-RETRO Page 110 Rambusch Lighting Design Studios: 28 West 25th street, New York, NY 10010 (212) 675-0400 Fax: (212) 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, NJ 07304 (201) 433-3355 Fax: (201) 333-8377 PREVIOUS PAGE NEXT < PREVIOUS PAGE NEXT SACRED HEART Cathedral, Richmond VA Architect: Aquino & Winthrop Lighting Designer: Viggo B. Rambusch Fixtures: RD-60-500-Q-T30-RETRO (page 110) Since inventing and receiving patents on the recessed ellipsoidal Rambusch Downlight in 1937, Rambusch has continuously updated this classic fixture’s technology to reflect the many changes that have occurred over six decades of use. There are thousands of applications throughout the country where the older, less efficient fixtures are still in use. This project is a prime example where Rambusch retrofit a new optic system with current lamp technology, to provide more light using less energy. (500W electrical consumption versus the old 750W lamp, and new lamp life of 2,000 hours versus the older 500 hours.) The new optic with a 500W lamp provides more light than the old 750W lamp. Utilizing the existing power connection, a new fixture is mounted on the existing face plate, without requiring any alteration to the ceiling wiring or installation. This change resulted in more light and at considerable savings to the church, and there was a three-year payback. Rambusch Lighting Design Studios: 40 West 13th Street, New York, NY 10011-7989 (212) 675-0400 Fax: (212) 620-4687 Workshops: 218-230 South Parkway, Clifton, NJ 07014-1314 (201) 778-8899 Fax (201) 778-0072 PREVIOUS PAGE NEXT 500 Watt Quartz Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 Application: The Rambusch Hospital Examination Recessed Downlite has been designed specifically for use over patient’s beds in hospitals and in hospital examination rooms (meets VA photometric requirements). The high efficiency (56.3%) and low brightness of the downlite is achieved through our use of a specular Alzak reflector, special lens, and a combination regressed aperture and baffle system which projects a rectangular beam over the length of the patient. Listed by Underwriters Laboratories, the RD-HE-60-500 carries the I.B.E.W. label. twist-loc minimum-trim baffle NOTE: notch ceiling material so that the minimum trim (“B-PAN”) will sit flush with ceiling line. Twist-Loc Hospital Examination Recessed Downlite RD-HE-60-500-Q-LC Minimum-Trim Baffle Hospital Examination Recessed Downlite RD-HE-60-500-Q-B plaster ring including flanges 9 7/8” face plate diameter 8” aperture diameter 5” height 16 1/4” face plate diameter 6” aperture diameter 5” height 16 1/4” Rectangular beam Hospital Examination Recessed Downlite wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector . socket Heavy-duty type S-25X, minican, screw base (Cat. No. 201-124). radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge), with 1/2” diameter vent holes. reflector Specular Alzak .040” finished thickness, 85% reflectance modified for desired distribution (install luminaire so that ‘ears’ run parallel to bed/table length). lens 6”diameter linear spread lens. twist-loc Die cast aluminum, 8” diameter, with 5” diameter chamfered aperture. Sloping ramps on frame engage lugs on lower body for fast installation from above or below. Reversible mounting frame; flange up for wet construction, and down for existing ceilings. minimum-trim baffle die formed steel mounting frame with removable ceiling trim. finish Exterior and interior baffle, section-baked high temperature black. Face plate and trim, baked white enamel. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit, Osram/Sylvania RP-8A. lamp USHIO AMERICA 250 watt/T4 Frosted mini-can screw base maximum Lamp Catalog #215-102/ (1000360) or USHIO AMERICA 500 watt / T4 Frosted mini-can screw base maximum Lamp Catalog #215-104/ (1000466) Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add AUX to catalog number <PREVIOUS PAGE Photometrics Page 151 NEXT> ® Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 150/250/500W Quartz 45°/60° Beam Downlite Pendant & Bracket Mount For minimum mounting heights refer to Recessed Downlite pages. wire 14 AWG Teflon® stranded wire rated 600V at 250° C to thermal protector. socket Heavy-duty type S-25X, minican, screw base (Cat. No. 201-124). sink Die cast aluminum heat sink for maximum heat dissapation from socket/lamp area. housing Heavy gauge one piece spun aluminum cylinder (.090” thick). reflector Specular Alzak .040” finished thickness, 85% reflectance. pyrex disc Standard issue, in compliance with U.L. requirements. Moveable to allow for relamping from below. pendant canopy and stem Maximum 5/8” nominal o.d. stem length with U.L. label 5’0” standard and 6” diameter universal canopy suitable for mounting on ceiling from 0°- 60° slope. Note: U.L. requires 24” stem minimum on 500 Watt units. PENDANT MOUNTED BRACKET MOUNTED PD-60-150-Q BD-60-150-Q (60° beam with 150W lamp) (60° beam with 150W lamp) PD-60-250-Q BD-60-250-Q (60° beam with 250W lamp) (60° beam with 250W lamp) PD-60-500-Q BD-60-500-Q (60° beam with 500W lamp) (60° beam with 500W lamp) PD-45-250-Q BD-45-250-Q (45° beam with 250W lamp) (45° beam with 250W lamp) PD-45-500-Q BD-45-500-Q (45° beam with 500W lamp) (45° beam with 500W lamp) bracket canopy 5 3/4” diameter for mounting to outlet box with threaded center stud (supplied by others). finish Interior surfaces backed high temperature black, exterior standard finish baked white enamel. Other finishes available (additional cost). servicing For mounting details see installation sheet. lamp USHIO AMERICA: Frosted mini-can screw base 150w (215-101), 250w (215-102), 400w (215-103), 500w (215-104). bracket Cast aluminum adjustable bracket can be set and locked in any (2) direction up to 12 degrees from vertical, and 45 degrees right and left. Application: The Rambusch PD and BD series have been designed specifically for use in a variety of public spaces, in locations where an efficient downlighting system with exposed luminaires are required or where recess space is not available.. The extremely high efficiency (upto 74%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and a combination regressed aperture and baffle system. The PD and BD series are listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. They carry the I.B.E.W. Local 3 label. Pendant mounted Downlite Bracket mounted Downlite housing o.d. aperture diameter height stem length housing o.d. aperture diameter height bracket length 8” 5” 121/4” 5’ 0” 8” 5” 121/4” 5 3/4” Use only “Frosted” Mini-can screw based lamps. For optimum performance use either USHIO AMERICA or Osram/Sylvania lamps. For gold anodized reflector, add G to catalog number. For auxiliary emergency circuit, add “AUX”, for special finish “SF” to catalog number <PREVIOUS PAGE Technical Drawings Project Specifics Photometrics Page 121 NEXT> Page 121 THE STANDARD FOR ARCHITECTURAL SPACE SINCE 1898 © Peter Mauss/Esto < PREVIOUS PAGE NEXT B'NAI JESHURUN SYNAGOGUE NEW YORK CITY Architect: Bromley, Caldari Architects PC Lighting Designer: Charles Cosler Theatre Design, Inc. In renovating this turn-of-the-century synagogue in Manhattan, the damaged, ornate plasterwork ceiling had to be replaced and a completely new lighting scheme devised to fulfill its aesthetic and functional demands. The plaster ceiling was removed and in its place the architects designed a bold structural framework for the new lighting system (with 4 types of lighting...ambient, accent, uplighting and special mood lighting), programmed to preset "moods" that could accommodate various seating configurations, religious uses and occasions. Rambusch pendant downlites were hung from the ceiling through the 'structure'...PAL-88 Uplites were mounted on a perimeter catwalk...amber and blue gelled lighting was projected on to the ceiling above...and decorative fixtures in alcoves were upgraded and tied into the overall system. By being able to select one of the five standard Uplite light patterns, the designer was able to choose the shape of indirect light needed for this specific architectural space. Appropriately, the newly renovated synagogue was opened for worship during Hanukkah, the Jewish "festival of lights". Fixtures: PD-60-500-Q-B (page 121) Rambusch Lighting Design Studios: 28 West 25th Street, New York, NY 10010 • (212) 675-0400 • Fax: (212) 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • (212) 333-2525 • Fax: (201) 433-3355 PREVIOUS PAGE NEXT PREVIOUS PAGE NEXT > YERBA-BUENA GARDENS - THEATER Lighting Designer: Synergy Consultants Architect: James Stewart Polsheck & Partners Objectives: To provide a dimmable lighting source that would blend into the structural elements of the catwalk system. The lighting fixtures must provide a visually even light level within the beam distribution of light. The light level must be the same even though the mounting heights vary throughout the theater space. Execution: By adjusting the standard recessed fixture into a flexible mounting system for the catwalk application, a fixture that provided the needed lighting distribution in a flexible mounting system was accomplished. Results: A fixture that met both the performance and mounting needs of the space was created. In addition, the fixture could easily be serviced from the catwalk above. Due to the design of the catwalk mounting system, when the optic was replaced it would return to the previous adjustment and thus previous light distribution. Fixtures: RD-BD-60-500-Q-CAT-MOD Technical Drawing Rambusch Lighting Design Studios: 40 West 13th Street, New York, NY 10011-7989 • (212) 620-4687 • Fax: (212) 620-4687 Workshops: 218-230 South Parkway, Clifton, New Jersey 07014-1314 • (201) 778-8899 • Fax: (201) 778-0072 PREVIOUS PAGE NEXT <<RETURN NEXT> <PREVIOUS PAGE NEXT> ST. MARY’s Church Alexandria, MN Architect: HGA Liturgical Designer: Br. Frank T. Kacmarcik Obl.S.B. For the dramatic space of this contemporary house of worship, the lighting system had to be multi-functional for the varied use of the space and its congregation. Additionally, the lighting had to maintain the atmosphere of the interior for both its daytime infusion of natural light and in the evenings. The array of suspended pendant light fixtures provide a delicate, unobtrusive element in this architectural interior that is flexible, functional and in keeping with the spirit of the surroundings. Rambusch Pendant downlite fixtures were modified to include added uplites to achieve the desired lighting effect. Technical Drawing PD-45-500-Q-MOD Page 121 Rambusch Lighting Design Studios: 28 West 25th street, New York, NY 10010 (212) 675-0400 Fax: (212) 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, NJ 07304 (201) 333-2525 Fax: (201) 433-3355 PREVIOUS PAGE NEXT > <PREVIOUS PAGE NEXT> < PREVIOUS PAGE NEXT CHRIST CHURCH, Cranbrook, Michigan Architect: Jickling Lymon Powell Associates Lighting Designer: Viggo Bech Rambusch Fixtures: BD-60-500-Q-SF (page 121) A critical task was to create a lighting system that would deliver adequate light so that the congregation could read and worship comfortably. The installation of lowerable Rambusch Downlites in front of the wooden trusses provided light unobtrusively, barely visible to the congregation below and behind, while it achieved the needed levels of light for reading and worship. This allowed for light without impacting upon the integrity of the worship space. Technical Drawing Rambusch Lighting Design Studios: 40 West 13th Street, New York, NY 10011-7989 (212) 675-0400 Fax: (212) 620-4687 Workshops: 218-230 South Parkway, Clifton, NJ 07014-1314 (201) 778-8899 Fax (201) 778-0072 PREVIOUS PAGE NEXT > 100/150/200W A21 80° beam Softlite TM Recessed Downlite Conoid & Multi-Groove Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 7.5 foot minimum ceiling height wire 14 AWG, SF-2 stranded wire rated 600V at 200° C to thermal protector. socket Medium base porcelain. box 4"x 4" galvanized steel splice box baffle Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance.* conoid Hydro-formed aluminum cone. Specular finish, color as specified. Clear Alzak standard. * multi-groove Grooved hydro-formed aluminum, matte black finish. finish Exterior and interior baffle, section-baked high temperature black. Application: conoid The Rambusch RD-A-100/150/200-A21 with conoid or multi-groove has been designed specifically for use in low to medium ceiling areas (7.5 foot minimum) where the "A" type lamps are most practical. The high efficiency (56.4%) and low brightness of this Softlite TM recessed downlite are achieved through our use of a specular Alzak reflector and ceiling trim. The RDA-100/150/200-A21 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. servicing Must have access from above to install (twist-loc unit may be installed from below see page 132). Maintenance and relamping from below. For mounting details see installation sheet. lamp 100/150/200 A21/I.F. multi-groove Conoid Softlight Recessed Downlite RD-A-100/150/200-A21-CC* Multi-Groove Softlight Recessed Downlite RD-A-100/150/200-A21-M 0-30° Tilt Conoid Softlight Recessed Downlite RD-A-100/150/200-A21-CC*-T30 0-30° Tilt Multi-Groove Recessed Downlite Softlight RD-A-100/150/200-A21-M-T30 flanges o.d. aperture diameter height flanges o.d. aperture diameter height flanges o.d. aperture diameter height flanges o.d. aperture diameter height 6” 5” 11” For mounting details see installation sheet *For gold anodized reflector. add “G”. from the family of Rambusch® Downlites <PREVIOUS PAGE 6” 5” 11” Photometrics 6” 5” 13” 6” 5” 13”” For separate auxiliary circuit add, "AUX" to catalog number. Page 131 NEXT> 100/150/200W A21 80° beam Softlight TM Recessed Downlite Twist-loc & Mini-baffle Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 7.5 foot minimum ceiling height wire 14 AWG, SF-2 stranded wire rated 600V at 200° C to thermal protector. socket Medium base porcelain. box 4"x 4" galvanized steel splice box baffle Die drawn steel .037” (20 gauge). reflector Specular Alzak .040” finished thickness, 85% reflectance.*** twist-loc Die cast aluminum, 8” diameter, with 5” diameter chamfered aperture. Sloping ramps on frame engage lugs on lower body for fast installation from above or below. Reversible mounting frame; flange up for wet construction, and down for existing ceilings. minimum-trim baffle die formed steel mounting frame with removable ceiling trim. The Rambusch RDA-100/150/200-A21 with twist-loc or minimum-trim baffle has been designed specifically for use in low to medium ceiling areas (7.5 foot minimum) where the "A" type lamps are most practical. The high efficiency (50.2%) and low brightness of this Softlight recessed downlite are achieved through our use of a specular Alzak reflector and ceiling trim. The RDA-100/150/200-A21 is listed by the Underwriters’ Laboratories for use in both fire-proof and non-fireproof construction and is approved by the The Canadian Standards Association. It carries the I.B.E.W. Local 3 label. Twist-Loc* Softlight Recessed Downlite RD-A-100/150/200-A21-LC plaster ring including flanges 97/8” face plate diameter 8” aperture diameter 5” height 10 1/4” face plate diameter aperture diameter height Photometrics 6” 5” 10 1/4” servicing Minimum-trim must have access from above to install, twist-loc unit may be installed from below. Maintenance and relamping from below. For mounting details see installation sheet. lamp 100/150/200 A21/I.F. 0-30° Tilt Twist-Loc* Softlight Recessed Downlite RD-A-100/150/200-A21-LC-T30 plaster ring including flanges 9 7/8” face plate diameter 8” aperture diameter 5” height 11 3/4” 0-30° Tilt Minimum-Trim Baffle** Softlight Recessed Downlite RD-A-100/150/200-A21-B-T30 face plate diameter aperture diameter height 6” 5” 11 3/4” *Reversible mounting frame, add minimum of 1/ 2” to height of clear structure above ceiling. ***For gold anodized reflector. add “G”. from the family of Rambusch® Downlites <PREVIOUS PAGE minimum-trim baffle NOTE: notch ceiling material so that the minimum trim (“B-PAN”) will sit flush with ceiling line. Minimum-Trim Baffle** Softlight Recessed Downlite RD-A-100/150/200-A21-B For mounting details see installation sheet ** Access above ceiling required. finish Exterior and interior baffle, sectionbaked high temperature black. Face plate and trim, baked white enamel. thermal protector In accordance with U.L. requirements, an outlet box with thermal cut-off is attached to each unit. twist-loc Application: For separate auxiliary circuit add, "AUX" to catalog number. Page 132 NEXT> ® Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 100/150/200w A lamp Pendant Softlite Downlite Pendant / Bracket / Surface 7.5 foot minimum ceiling height wire No. 14AWG, SF-2 stranded wire rated 600V at 200°C to thermal protector. socket Medium base porcelain. housing Heavy gauge one piece spun aluminum cylinder (.090” thick). reflector Specular Alzak .040” finished thickness, 85% reflectance. aperture Combination 5” dia. regressed aperture and baffle system. pendant canopy and stem Maximum 5/8” nominal o.d. stem length with U.L. label 5’0” standard and 6” diameter universal canopy suitable for mounting on ceiling from 0°- 60° slope. Note: U.L. requires 24” stem minimum on 500 Watt units. bracket canopy 5 3/4” diameter for mounting to outlet box with threaded center stud (supplied by others). finish Interior surfaces backed high temperature black, exterior standard finish baked white enamel. Other finishes available (additional cost). servicing For mounting details see installation sheet. Pendant mounted Softlite Downlite PD-A-100/150/200-A21 housing o.d. aperture diameter height stem length lamp 100/150/200 A21/I.F. 8” 5” 121/4” 5’ 0” bracket Cast aluminum adjustable bracket can be set and locked in any (2) direction up to 12 degrees from vertical, and 45 degrees right and left. 5 3/4” Application: 121/4” The Rambusch PD, BD and SD series have been designed specifically for use in a variety of public spaces, in locations where an efficient downlighting system with exposed luminaires are required or where recess space is not available.. The extremely high efficiency (upto 50.2%) and low brightness of this recessed downlite are achieved through our use of a specular Alzak reflector and a combination regressed aperture and baffle system. The PD, BD and SD series are listed by the Underwriters’ Laboratories for use in both fireproof and non-fireproof construction and is approved by the The Canadian Standards Association. They carry the I.B.E.W. Local 3 label. For gold anodized reflector, add G to catalog number. <PREVIOUS PAGE Photometrics 13” Bracket mounted Softlite Downlite BD-A-100/150/200-A21 Surface mounted Softlite Downlite SD-A-100/150/200-A21 housing o.d. aperture diameter height bracket length housing o.d. aperture diameter height 8” 5” 121/4” 5 3/4” 8” 5” 13” Page 133 NEXT> ® Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 7.5 foot minimum ceiling height 150W 12.0 foot minimum ceiling height 250W 150/250 Watt PAR 38 FLOOD/SPOT Recessed PAR Downlite Conoid & Multi-Groove wire No. 14 AWG, SF-2 stranded wire to thermal protector rated 600V at 200°C. socket Medium base porcelain. Radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). conoid Hydro-formed aluminum cone. Specular finish, color as specified. Clear Alzak standard. multi groove Grooved hydroformed aluminum, matte black finish. finish Exterior and interior baffle, section-baked high temperature black. Application: conoid The RD-PAR38 series has been designed for supplemental and accent lighting. The use of PAR lamps provides both narrow and wide beam patterns. The RD-PAR38 series is listed by the Underwriters Laboratories for both fireproof and non-fireproof construction. These luminaries bare the UL /C UL label and are approved by CSA Testing Laboratories. They carry the I.B.E.W./AFL label. Conoid* Recessed Downlite RD-PAR-150-PAR38-CC RD-PAR-250-PAR38-CC plaster ring including flanges face plate diameter aperture diameter height servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twistloc unit may be installed from below. For mounting details see installation sheet. 97/8” 8” 5” 12” lamp 150/250 PAR38 multi-groove Multi-Groove* Recessed Downlite RD-PAR-150-PAR38-M RD-PAR-250-PAR38-M 0-30° Tilt Conoid* Recessed Downlite RD-PAR-150-PAR38-CC-T30 RD-PAR-250-PAR38-CC-T30 0-30° Tilt Multi-Groove* Recessed Downlite RD-PAR-150-PAR38-M-T30 RD-PAR-250-PAR38-M-T30 face plate diameter aperture diameter height plaster ring including flanges face plate diameter aperture diameter height face plate diameter aperture diameter height 6” 5” 12” 97/8” 8” 5” 131/4” 6” 5” 141/4” For mounting details see installation sheet * Access above ceiling required. from the family of Rambusch® Downlites <PREVIOUS PAGE Photometrics Page 141 NEXT> ® Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 7.5 foot minimum ceiling height 150W 12.0 foot minimum ceiling height 250W 150/250 Watt PAR 38 FLOOD/SPOT Recessed PAR Downlite Twist-loc & Mini-baffle wire No. 14 AWG, SF-2 stranded wire to thermal protector rated 600V at 200°C. socket Medium base porcelain. Radiator Die cast aluminum with eight (8) fins for maximum heat dissipation. housing and two annular baffles Die drawn steel .037” (20 gauge). twist-loc Die-cast aluminum, 8” diameter, with 5” diameter chamfered aperture. Sloping ramps on frame engage lugs on lower body for fast installation from above or below. Reversible mounting frame; flange up for wet construction, flange down for dry construction and existing ceilings. minimum-trim baffle Die formed steel mounting frame with removable ceiling trim. Application: twist-loc The RD-PAR38 series has been designed for supplemental and accent lighting. The use of PAR lamps provides both narrow and wide beam patterns. The RD-PAR38 series is listed by the Underwriters Laboratories for both fireproof and non-fireproof construction. These luminaries bare the UL /C UL label and are approved by CSA Testing Laboratories. They carry the I.B.E.W./AFL label. Twist-Loc* Recessed Downlite RD-PAR-150-PAR38-LC RD-PAR-250-PAR38-LC plaster ring including flanges face plate diameter aperture diameter height finish Exterior and interior baffle section-baked black enamel. Face plate and trim baked white enamel. 97/8” 8” 5” 12” minimum-trim baffle NOTE: notch ceiling material so that the minimum trim (“B-PAN”) will sit flush with ceiling line. Minimum-Trim Baffle** Recessed Downlite RD-PAR-150-PAR38-B RD-PAR-250-PAR38-B 0-30° Tilt Twist-Loc* Recessed Downlite RD-PAR-150-PAR38-LC-T30 RD-PAR-250-PAR38-LC-T30 face plate diameter aperture diameter height plaster ring including flanges face plate diameter aperture diameter height For mounting details see installation sheet 6” 5” 12” 97/8” 8” 5” 131/4” servicing Specially formed and tempered steel security devices to allow for easy relamping from above. Minimum-trim must have access from above to install, twistloc unit may be installed from below. For mounting details see installation sheet. lamp 150/250 PAR38 0-30° Tilt Minimum-Trim Baffle** Recessed Downlite RD-PAR-150-PAR38-B-T30 RD-PAR-250-PAR38-B-T30 face plate diameter aperture diameter height 6” 5” 141/4” *Reversible mounting frame, add minimum of 1/ 2” to height of clear structure above ceiling. ** Access above ceiling required. from the family of Rambusch® Downlites <PREVIOUS PAGE Photometrics Page 142 NEXT> ® Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 100/250 Watt Par 38 FLOOD/SPOT PAR Downlite Pendant / Bracket / Surface 7.5 foot minimum ceiling height wire No. 14AWG, SF-2 stranded wire rated 600V at 200°C to thermal protector. socket Medium base porcelain. housing Heavy gauge one piece spun aluminum cylinder (.090” thick). aperture Combination 5” dia. regressed aperture and baffle system. pendant canopy and stem Maximum 5/8” nominal o.d. stem length with U.L. label 5’0” standard and 6” diameter universal canopy suitable for mounting on ceiling from 0°- 60° slope. bracket canopy 5 3/4” diameter for mounting to outlet box with threaded center stud (supplied by others). finish Interior surfaces backed high temperature black, exterior standard finish baked white enamel. Other finishes available (additional cost). servicing For mounting details see installation sheet. lamp 100/250 PAR38 Pendant mounted Softlite Downlite PD-PAR-150/250-PAR38 housing o.d. aperture diameter height stem length 8” 5” 121/4” 5’ 0” bracket Cast aluminum adjustable bracket can be set and locked in any (2) direction up to 12 degrees from vertical, and 45 degrees right and left. 5 3/4” Application: 121/4” 13” The Rambusch PD, BD and SD series have been designed specifically for use in a variety of public spaces, in locations where an efficient downlighting system with exposed luminaires are required or where recess space is not available. The use of PAR lamps provides both narrow and wide beam patterns. The PD, BD and SD series are listed by the Underwriters’ Laboratories for use in both fireproof and non-fireproof construction and is approved by the The Canadian Standards Association. They carry the I.B.E.W. Local 3 label. Bracket mounted Softlite Downlite BD-PAR-150/250-PAR38 Surface mounted Softlite Downlite SD-PAR-150/250-PAR38 housing o.d. aperture diameter height bracket length housing o.d. aperture diameter height 8” 5” 121/4” 5 3/4” 8” 5” 13” Page 144 <PREVIOUS PAGE Photometrics NEXT> 150 Watt Quartz 60° Beam Recessed Downlite Twist-loc & Mini-baffle Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-4687 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *7.5 foot minimum ceiling height CONE OF LIGHT DIAGRAM, 90% OF LIGHT IN BEAM PATTERN I.T.L. Report # 47907 (diameter shown is where fc value is half the fc at nadir) angle 0 5 15 25 35 45 55 65 75 85 90 luminaire distribution data mean vertical* zone 0-30 0-40 0-60 0-90 90-180 0-180 zonal lumen summary all values represents use with Pyrex lens. candela 3075 3005 2457 2002 104 7 2 0 0 0 0 lumens 1829 1952 1969 1959 0 1959 % lamp 67.7 72.3 72.6 72.6 0.0 72.6 lumens 281 698 850 123 5 2 0 0 0 % fixture 93.3 99.6 100.0 100.0 0.0 100.0 Mounting Height in feet FC Diameter in feet 6.0 85.4 5.5 8.0 48.0 7.3 10.0 30.8 9.1 12.0 21.4 10.9 14.0 15.7 12.8 16.0 12.0 14.6 TOTAL LUMINAIRE EFFICIENCY = 72.6% point-by-point footcandle calculations* horizontal distance from CL of Downlite (ft.) 1. all calculated footcandle values and photometric data are based on the use of a 150 watt 2700 lumens frosted mini-can screw base tungsten halogen lamp and ITL report 47907. 2. all footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium, .80; poor, .75). 3. maximum spacing and mounting height ratio above workplane: 0.8 4. for gold anodized reflectors, multiply readings by .85 5. for extended lamp life use 130v. lamp and multiply readings by .75 vertical distance from Downlite to workplane ceiling wall coefficients of utilization,* floor cavity reflectance: 20% * by zonal-cavity method, IES preferred practice. ft. 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 room cavity ratio 0 1 2 3 4 5 6 7 8 9 10 70% 86 83 79 76 73 70 67 64 62 59 57 0 30.8 25.4 21.4 18.2 15.7 13.7 12.0 10.6 9.5 8.5 7.7 7.0 6.4 5.8 5.3 4.9 80% 50% 30% 10% 86 86 86 81 79 78 76 74 72 72 69 67 68 65 62 65 61 58 62 58 55 59 55 52 56 52 49 53 49 47 51 47 45 2 25.6 21.8 18.7 16.3 14.3 12.6 11.2 10.0 9.0 8.1 7.3 6.7 6.1 5.6 5.2 4.8 70% 84 81 78 75 72 69 66 63 61 59 56 4 17.7 15.5 13.6 12.1 10.9 9.9 9.0 8.3 7.6 7.0 6.4 5.9 5.4 5.0 4.7 4.4 6 4.2 6.9 8.5 8.9 8.5 7.9 7.2 6.6 6.1 5.6 5.2 4.9 4.5 4.3 4.0 3.8 8 0.1 0.3 1.0 2.0 3.1 4.2 4.8 5.0 4.9 4.7 4.4 4.1 3,9 3.6 3.4 3.2 70% 50% 30% 10% 84 84 84 80 78 77 75 73 71 71 68 66 67 64 62 64 61 58 61 57 55 58 55 52 55 52 49 53 49 47 51 47 45 50% 81 77 73 69 66 63 60 57 55 52 50 10 12 14 16 18 0.1 0.2 0.6 1.1 1.7 2.3 2.8 3.1 3.2 3.2 3.1 3.0 2.8 0.1 0.2 0.4 0.7 1.1 1.4 1.7 2.0 2.1 2.2 0.1 0.1 0.3 0.5 0.7 0.9 1.1 0.1 0.1 0.3 0.4 0.1 50% 30% 10% 81 81 76 74 71 69 67 65 63 61 60 58 57 55 54 52 51 49 49 47 47 45 30% 50% 30% 10% 77 77 77 74 73 72 71 69 68 68 66 64 65 62 60 62 59 57 59 56 54 56 54 51 54 51 49 52 49 47 49 47 44 20 10% 50% 30% 10% 74 74 74 71 71 70 69 68 66 66 64 63 63 61 60 61 58 57 58 56 54 56 53 51 53 51 49 51 48 46 49 46 44 Page 101 A 1/00 Patent Pending © 2000 Rambusch Lighting, NY <PREVIOUS PAGE <<RETURN NEXT> 250 Watt Quartz 60° Beam Recessed Downlite Twist-loc & Mini-baffle Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-4687 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *12.0 foot minimum ceiling height CONE OF LIGHT DIAGRAM, 90% OF LIGHT IN BEAM PATTERN I.T.L. Report # 47863 (diameter shown is where fc value is half the fc at nadir) angle 0 5 15 25 35 45 55 65 75 85 90 luminaire distribution data mean vertical* zone 0-30 0-40 0-60 0-90 90-180 0-180 zonal lumen summary all values represents use with Pyrex lens. candela 2726 2992 3499 3445 592 10 2 0 0 0 0 lumens 2819 3367 3378 3378 0 3378 % lamp 58.7 70.1 70.4 70.4 0.0 70.4 lumens 301 973 1546 548 9 1 0 0 0 % fixture 83.5 99.7 100.0 100.0 0.0 100.0 Diameter in feet 6.0 75.7 7.3 8.0 42.6 9.8 10.0 27.3 12.2 12.0 18.9 14.6 14.0 13.9 17.1 16.0 10.6 19.5 horizontal distance from CL of Downlite (ft.) 1. all calculated footcandle values and photometric data are based on the use of a 250 watt 4800 lumens frosted minican screw base tungsten halogen lamp and ITL report 47863. 2. all footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium, .80; poor, .75). 3. maximum spacing and mounting height ratio above workplane: .90 4. for gold anodized reflectors, multiply readings by .85 5. for extended lamp life use 130v. lamp and multiply readings by .75 ft. 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 vertical distance from Downlite to workplane ceiling wall * by zonal-cavity method, IES preferred practice. FC TOTAL LUMINAIRE EFFICIENCY = 70.4% point-by-point footcandle calculations* coefficients of utilization,* floor cavity reflectance: 20% Mounting Height in feet room cavity ratio 0 1 2 3 4 5 6 7 8 9 10 70% 84 80 76 73 69 66 63 60 57 55 52 0 27.3 22.5 18.9 16.1 13.9 12.1 10.6 9.4 8.4 7.6 6.8 6.2 5.6 5.2 4.7 4.4 80% 50% 30% 10% 84 84 84 78 77 75 73 71 68 69 65 63 64 61 58 61 57 54 57 53 50 54 50 47 51 47 44 48 44 41 46 42 39 2 32.6 27.0 22.6 19.1 16.4 14.2 12.3 10.8 9.5 8.5 7.6 6.8 6.2 5.6 5.1 4.7 70% 82 78 75 72 68 65 62 59 56 54 51 4 27.9 23.0 20.1 17.7 15.7 14.0 12.4 11.1 10.0 9.0 8.1 7.4 6.8 6.2 5.7 5.2 6 14.8 16.8 16.3 15.3 13.9 12.4 10.9 9.8 8.9 8.2 7.5 7.0 6.5 6.0 5.5 5.1 8 0.6 1.9 4.6 7.5 9.4 9.4 9.2 8.8 8.2 7.6 7.0 6.3 5.7 5.4 5.0 4.7 70% 50% 30% 10% 82 82 82 77 75 74 72 70 68 68 65 62 64 60 58 60 56 54 57 53 50 53 50 47 50 47 44 48 44 41 45 41 39 50% 78 74 70 66 62 59 55 52 50 47 45 10 12 14 16 18 20 0.1 0.2 0.5 1.4 2.9 4.5 5.7 6.0 6.0 5.9 5.7 5.4 5.1 4.8 4.5 0.1 0.3 0.6 1.1 2.0 2.9 3.7 4.2 4.2 4.2 4.1 4.0 0.1 0.1 0.3 0.5 0.8 1.5 2.1 2.6 3.0 3.1 0.1 0.1 0.2 0.5 0.7 1.1 1.5 0.1 0.1 0.3 0.4 0.1 50% 30% 10% 78 78 73 72 68 66 63 61 59 57 56 53 52 50 49 47 46 44 44 41 41 39 30% 50% 30% 10% 75 75 75 71 70 70 68 66 65 64 62 60 61 58 56 58 55 53 55 52 49 52 49 46 49 46 44 46 43 41 44 41 39 10% 50% 30% 10% 72 72 72 69 68 68 66 64 63 63 61 59 59 57 56 56 54 52 54 51 49 51 48 46 48 46 43 46 43 41 44 41 39 Page 101 B 1/00 Patent Pending © 2000 Rambusch Lighting, NY <PREVIOUS PAGE <<RETURN NEXT> 150 Watt Quartz 60° Beam Recessed Downlite Conoid & Multi-Groove Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-4687 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *7.5 foot minimum ceiling height CONE OF LIGHT DIAGRAM, 90% OF LIGHT IN BEAM PATTERN I.T.L. Report # 47907 (diameter shown is where fc value is half the fc at nadir) angle 0 5 15 25 35 45 55 65 75 85 90 luminaire distribution data mean vertical* zone 0-30 0-40 0-60 0-90 90-180 0-180 zonal lumen summary all values represents use with Pyrex lens. candela 3075 3005 2457 2002 104 7 2 0 0 0 0 lumens 1829 1952 1969 1959 0 1959 % lamp 67.7 72.3 72.6 72.6 0.0 72.6 lumens 281 698 850 123 5 2 0 0 0 % fixture 93.3 99.6 100.0 100.0 0.0 100.0 Diameter in feet 6.0 85.4 5.5 8.0 48.0 7.3 10.0 30.8 9.1 12.0 21.4 10.9 14.0 15.7 12.8 16.0 12.0 14.6 horizontal distance from CL of Downlite (ft.) 1. all calculated footcandle values and photometric data are based on the use of a 150 watt 2700 lumens frosted minican screw base tungsten halogen lamp and ETL report 47907. 2. all footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium, .80; poor, .75). 3. maximum spacing and mounting height ratio above workplane: .80 4. for gold anodized reflectors, multiply readings by .85 5. for extended lamp life use 130v. lamp and multiply readings by .75 ft. 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 vertical distance from Downlite to workplane ceiling wall * by zonal-cavity method, IES preferred practice. FC TOTAL LUMINAIRE EFFICIENCY = 72.6% point-by-point footcandle calculations* coefficients of utilization,* floor cavity reflectance: 20% Mounting Height in feet room cavity ratio 0 1 2 3 4 5 6 7 8 9 10 70% 86 83 79 76 73 70 67 64 62 59 57 0 30.8 25.4 21.4 18.2 15.7 13.7 12.0 10.6 9.5 8.5 7.7 7.0 6.4 5.8 5.3 4.9 80% 50% 30% 10% 86 86 86 81 79 78 76 74 72 72 69 67 68 65 62 65 61 58 62 58 55 59 55 52 56 52 49 53 49 47 51 47 45 2 25.6 21.8 18.7 16.3 14.3 12.6 11.2 10.0 9.0 8.1 7.3 6.7 6.1 5.6 5.2 4.8 70% 84 81 78 75 72 69 66 63 61 59 56 4 17.7 15.5 13.6 12.1 10.9 9.9 9.0 8.3 7.6 7.0 6.4 5.9 5.4 5.0 4.7 4.4 6 4.2 6.9 8.5 8.9 8.5 7.9 7.2 6.6 6.1 5.6 5.2 4.9 4.5 4.3 4.0 3.8 70% 50% 30% 10% 84 84 84 80 78 77 75 73 71 71 68 66 67 64 62 64 61 58 61 57 55 58 55 52 55 52 49 53 49 47 51 47 45 8 0.1 0.3 1.0 2.0 3.1 4.2 4.8 5.0 4.9 4.7 4.4 4.1 3,9 3.6 3.4 3.2 10 12 14 16 18 0.1 0.2 0.6 1.1 1.7 2.3 2.8 3.1 3.2 3.2 3.1 3.0 2.8 0.1 0.2 0.4 0.7 1.1 1.4 1.7 2.0 2.1 2.2 0.1 0.1 0.3 0.5 0.7 0.9 1.1 0.1 0.1 0.3 0.4 0.1 50% 81 77 73 69 66 63 60 57 55 52 50 50% 30% 10% 81 81 76 74 71 69 67 65 63 61 60 58 57 55 54 52 51 49 49 47 47 45 30% 50% 30% 10% 77 77 77 74 73 72 71 69 68 68 66 64 65 62 60 62 59 57 59 56 54 56 54 51 54 51 49 52 49 47 49 47 44 20 10% 50% 30% 10% 74 74 74 71 71 70 69 68 66 66 64 63 63 61 60 61 58 57 58 56 54 56 53 51 53 51 49 51 48 46 49 46 44 Page 102 A 1/00 Patent Pending © 2000 Rambusch Lighting, NY <PREVIOUS PAGE <<RETURN NEXT> 250 Watt Quartz 60° Beam Recessed Downlite Conoid & Multi-Groove Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-4687 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *12.0 foot minimum ceiling height CONE OF LIGHT DIAGRAM, 90% OF LIGHT IN BEAM PATTERN I.T.L. Report # 47863 (diameter shown is where fc value is half the fc at nadir) angle 0 5 15 25 35 45 55 65 75 85 90 luminaire distribution data mean vertical* zone 0-30 0-40 0-60 0-90 90-180 0-180 zonal lumen summary all values represents use with Pyrex lens. candela 2726 2992 3499 3445 592 10 2 0 0 0 0 lumens 2819 3367 3378 3378 0 3378 % lamp 58.7 70.1 70.4 70.4 0.0 70.4 lumens 301 973 1546 548 9 1 0 0 0 % fixture 83.5 99.7 100.0 100.0 0.0 100.0 Diameter in feet 6.0 75.7 7.3 8.0 42.6 9.8 10.0 27.3 12.2 12.0 18.9 14.6 14.0 13.9 17.1 16.0 10.6 19.5 horizontal distance from CL of Downlite (ft.) 1. all calculated footcandle values and photometric data are based on the use of a 250 watt 4800 lumens frosted minican screw base tungsten halogen lamp and ITL report 47863. 2. all footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium, .80; poor, .75). 3. maximum spacing and mounting height ratio above workplane: .90 4. for gold anodized reflectors, multiply readings by .85 5. for extended lamp life use 130v. lamp and multiply readings by .75 ft. 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 vertical distance from Downlite to workplane ceiling wall * by zonal-cavity method, IES preferred practice. FC TOTAL LUMINAIRE EFFICIENCY = 70.4% point-by-point footcandle calculations* coefficients of utilization,* floor cavity reflectance: 20% Mounting Height in feet room cavity ratio 0 1 2 3 4 5 6 7 8 9 10 70% 84 80 76 73 69 66 63 60 57 55 52 0 27.3 22.5 18.9 16.1 13.9 12.1 10.6 9.4 8.4 7.6 6.8 6.2 5.6 5.2 4.7 4.4 80% 50% 30% 10% 84 84 84 78 77 75 73 71 68 69 65 63 64 61 58 61 57 54 57 53 50 54 50 47 51 47 44 48 44 41 46 42 39 2 32.6 27.0 22.6 19.1 16.4 14.2 12.3 10.8 9.5 8.5 7.6 6.8 6.2 5.6 5.1 4.7 70% 82 78 75 72 68 65 62 59 56 54 51 4 27.9 23.0 20.1 17.7 15.7 14.0 12.4 11.1 10.0 9.0 8.1 7.4 6.8 6.2 5.7 5.2 6 14.8 16.8 16.3 15.3 13.9 12.4 10.9 9.8 8.9 8.2 7.5 7.0 6.5 6.0 5.5 5.1 70% 50% 30% 10% 82 82 82 77 75 74 72 70 68 68 65 62 64 60 58 60 56 54 57 53 50 53 50 47 50 47 44 48 44 41 45 41 39 8 0.6 1.9 4.6 7.5 9.4 9.4 9.2 8.8 8.2 7.6 7.0 6.3 5.7 5.4 5.0 4.7 10 12 14 16 18 20 0.1 0.2 0.5 1.4 2.9 4.5 5.7 6.0 6.0 5.9 5.7 5.4 5.1 4.8 4.5 0.1 0.3 0.6 1.1 2.0 2.9 3.7 4.2 4.2 4.2 4.1 4.0 0.1 0.1 0.3 0.5 0.8 1.5 2.1 2.6 3.0 3.1 0.1 0.1 0.2 0.5 0.7 1.1 1.5 0.1 0.1 0.3 0.4 0.1 50% 78 74 70 66 62 59 55 52 50 47 45 50% 30% 10% 78 78 73 72 68 66 63 61 59 57 56 53 52 50 49 47 46 44 44 41 41 39 30% 50% 30% 10% 75 75 75 71 70 70 68 66 65 64 62 60 61 58 56 58 55 53 55 52 49 52 49 46 49 46 44 46 43 41 44 41 39 10% 50% 30% 10% 72 72 72 69 68 68 66 64 63 63 61 59 59 57 56 56 54 52 54 51 49 51 48 46 48 46 43 46 43 41 44 41 39 Page 102 B 1/00 Patent Pending © 2000 Rambusch Lighting, NY <PREVIOUS PAGE <<RETURN NEXT> 400 Watt Quartz 60° Beam Recessed Downlite Twist-loc & Mini-baffle Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-4687 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *17.0 foot minimum ceiling height CONE OF LIGHT DIAGRAM, 90% OF LIGHT IN BEAM PATTERN I.T.L. Report # 47864 (diameter shown is where fc value is half the fc at nadir) angle 0 5 15 25 35 45 55 65 75 85 90 luminaire distribution data mean vertical* zone 0-30 0-40 0-60 0-90 90-180 0-180 zonal lumen summary all values represent use with Pyrex lens. candela 6657 6190 5323 5409 879 14 5 0 0 0 0 lumens 4574 5422 5437 5437 0 5437 lumens 588 1529 2457 848 12 3 0 0 0 % lamp 58.3 69.1 69.3 69.3 0.0 69.3 6.0 184.9 6.5 8.0 104.0 8.7 10.0 66.6 10.9 12.0 46.2 13.0 14.0 34.0 15.2 16.0 26.0 17.4 horizontal distance from CL of Downlite (ft.) feet. 15 16 17 18 19 vertical 20 distance from 21 Downlite to 22 workplane 23 24 25 27 30 33 36 ceiling wall room cavity ratio 0 1 2 3 4 5 6 7 8 9 10 0 29.6 26.0 23.0 20.5 18.4 16.6 15.1 13.8 12.6 11.6 10.7 9.1 7.4 6.1 5.1 70% 82 79 75 72 69 65 62 59 57 54 52 2 26.2 23.2 20.7 18.6 16.7 15.2 13.8 12.6 11.6 10.7 9.9 8.5 7.0 5.8 4.9 4 21.4 19.3 17.5 15.9 14.6 13.4 12.4 11.4 10.6 9.8 9.1 7.9 6.6 5.5 4.6 80% 50% 30% 10% 82 82 82 77 75 74 72 70 67 68 65 62 64 60 57 60 56 53 57 53 50 53 50 47 51 47 44 48 44 41 45 42 39 6 19.1 17.2 15.5 14.0 12.7 11.6 10.7 9.9 9.2 8.6 8.0 7.1 6.0 5.1 4.4 8 15.4 14.8 13.8 12.7 11.7 10.8 9.9 9.2 8.5 7.9 7.3 6.4 5.3 4.6 4.0 70% 81 77 74 71 67 64 61 59 56 53 51 10 4.6 7.1 9.0 9.7 9.9 9.5 9.0 8.4 7.9 7.4 6.9 6.1 5.0 4.3 3.7 12 0.3 0.8 1.5 3.2 4.7 5.8 6.6 6.8 6.9 6.6 6.3 5.7 4.8 4.1 3.5 70% 50% 30% 10% 81 81 81 76 74 73 71 69 67 67 64 61 63 60 57 59 56 53 56 52 50 53 49 47 50 46 44 48 44 41 45 41 39 14 16 18 20 22 24 26 28 0.1 0.1 0.3 0.7 1.2 3.4 3.3 4.1 4.7 4.9 5.0 4.5 3.9 3.4 0.1 0.2 0.3 0.7 1.0 1.8 2.4 3.4 3.8 3.6 3.2 0.1 0.1 0.2 0.3 0.6 1.4 2.6 3.0 2.9 0.1 0.1 0.3 1.2 2.0 2.4 0.1 0.3 1.0 1.5 0.1 0.3 0.8 0.1 0.3 0.1 50% 77 73 69 65 61 58 55 52 49 47 45 50% 30% 10% 77 77 72 71 67 65 63 60 59 56 55 53 52 49 49 46 46 44 44 41 41 39 30% 50% 30% 10% 74 74 74 70 69 68 67 65 64 63 61 60 60 58 56 57 54 52 54 51 49 51 48 46 49 46 44 46 43 41 44 41 39 30 10% 50% 30% 10% 71 71 71 68 67 67 65 64 61 62 60 59 59 57 55 56 54 52 53 51 49 51 48 46 48 45 43 46 43 41 44 41 39 1/00 Page 103 A <PREVIOUS PAGE Diameter in feet TOTAL LUMINAIRE EFFICIENCY = 69.3% 1. all calculated footcandle values and photometric data are based on the use of a 400 watt 7850 lumens frosted mini-can screw base tungsten halogen lamp and ITL report 47864. 2. all footcandle values are initial; inservice values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium, .80; poor, .75). 3. maximum spacing to mounting height ratio above workplane: .90 4. for gold anodized reflectors, multiply readings by .85 5. for extended lamp life use 130v. lamp and multiply readings by .75 * by zonal-cavity method, IES preferred practice. FC % fixture 84.1 99.7 100.0 100.0 0.0 100.0 point-by-point footcandle calculations* coefficients of utilization,* floor cavity reflectance: 20% Mounting Height in feet <<RETURN © 2000 Rambusch Lighting, NY NEXT> 500 Watt Quartz 60° Beam Recessed Downlite Twist-loc & Mini-baffle Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-4687 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *17.0 foot minimum ceiling height CONE OF LIGHT DIAGRAM, 90% OF LIGHT IN BEAM PATTERN I.T.L. Report # 48330 (diameter shown is where fc value is half the fc at nadir) angle 0 5 15 25 35 45 55 65 75 85 90 luminaire distribution data mean vertical* for 400 watt unit see page 103 A candela 6699 6625 5520 5349 2243 17 0 0 0 0 0 zone 0-30 0-40 0-60 0-90 90-180 0-180 zonal lumen summary all values represent use with Pyrex lens. lumens 4661 6162 6183 6183 0 6183 lumens 622 1583 2456 1501 22 0 0 0 0 % lamp 49.1 64.9 65.1 65.1 0.0 65.1 6.0 186.1 6.7 8.0 104.7 9.0 10.0 67.0 11.2 12.0 46.5 13.5 14.0 34.2 15.7 16.0 26.2 18.0 horizontal distance from CL of Downlite (ft.) feet. 15 16 17 18 19 vertical 20 distance from 21 Downlite to 22 workplane 23 24 25 27 30 33 36 ceiling wall room cavity ratio 0 1 2 3 4 5 6 7 8 9 10 0 29.8 26.2 23.2 20.7 18.6 16.7 15.2 13.8 12.7 11.6 10.7 9.2 7.4 6.2 5.2 70% 77 74 71 67 64 61 58 55 52 50 47 2 27.9 24.8 22.1 19.8 17.9 16.2 14.8 13.5 12.4 11.4 10.5 9.0 7.3 6.1 5.1 4 22.2 20.2 18.5 17.0 15.6 14.3 13.2 12.3 11.4 10.5 9.8 8.5 7.0 5.8 5.0 80% 50% 30% 10% 77 77 77 72 71 69 67 65 63 63 60 57 59 56 53 55 52 49 52 48 46 49 45 43 46 42 40 44 40 37 41 38 35 6 19.2 17.2 15.6 14.1 12.8 11.9 11.0 10.2 9.6 9.0 8.5 7.5 6.4 5.4 4.7 8 15.8 14.7 13.7 12.7 11.7 10.8 10.0 9.2 8.5 7.9 7.4 6.5 5.5 4.8 4.2 70% 76 72 69 66 63 60 57 54 51 49 47 10 8.4 10.4 10.7 10.5 10.0 9.4 8.9 8.4 7.9 7.4 6.9 6.1 5.1 4.3 3.8 12 1.1 2.3 4.0 5.8 7.1 7.4 7.4 7.1 6.9 6.5 6.2 5.6 4.8 4.1 3.5 70% 50% 30% 10% 76 76 76 71 69 68 66 64 62 62 59 57 58 55 53 55 51 49 52 48 45 49 45 42 46 42 40 43 40 37 41 37 35 14 0.1 0.2 0.5 1.1 2.1 3.1 4.3 5.2 5.4 5.5 5.4 5.0 4.4 3.9 3.4 50% 72 68 64 60 57 54 51 48 45 43 40 16 18 20 22 24 26 28 30 0.1 0.1 0.3 0.6 1.0 1.8 2.5 3.3 3.9 4.2 3.9 3.5 3.2 0.1 0.2 0.4 0.6 1.0 1.5 2.6 3.3 3.2 2.9 0.1 0.1 0.2 0.4 1.0 2.1 2.6 2.6 0.1 0.3 0.9 1.7 2.2 0.1 0.3 0.8 1.5 0.1 0.3 0.7 0.1 0.3 0.1 50% 30% 10% 72 72 67 66 62 61 58 56 54 52 51 48 47 45 45 42 42 40 39 37 37 35 30% 50% 30% 10% 69 69 69 66 65 64 62 61 59 59 57 55 56 53 51 53 50 48 50 47 45 47 44 42 44 42 39 42 39 37 40 37 35 10% 50% 30% 10% 66 66 66 64 63 62 61 59 58 57 56 54 54 52 51 52 49 48 49 46 45 46 44 42 44 41 39 42 39 37 39 37 35 1/00 Page 103 B <PREVIOUS PAGE Diameter in feet TOTAL LUMINAIRE EFFICIENCY = 65.1% 1. all calculated footcandle values and photometric data are based on the use of a 500 watt 9500 lumens frosted mini-can screw base tungsten halogen lamp and ITL report 48330. 2. all footcandle values are initial; inservice values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium, .80; poor, .75). 3. maximum spacing to mounting height ratio above workplane: 1.0 4. for gold anodized reflectors, multiply readings by .85 5. for extended lamp life use 130v. lamp and multiply readings by .75 * by zonal-cavity method, IES preferred practice. FC % fixture 75.4 99.6 100.0 100.0 0.0 100.0 point-by-point footcandle calculations* coefficients of utilization,* floor cavity reflectance: 20% Mounting Height in feet <<RETURN © 2000 Rambusch Lighting, NY NEXT> 400 Watt Quartz 60° Beam Recessed Downlite Conoid & Multi-Groove Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-4687 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *17.0 foot minimum ceiling height CONE OF LIGHT DIAGRAM, 90% OF LIGHT IN BEAM PATTERN I.T.L. Report # 47864 (diameter shown is where fc value is half the fc at nadir) angle 0 5 15 25 35 45 55 65 75 85 90 luminaire distribution data mean vertical* zone 0-30 0-40 0-60 0-90 90-180 0-180 zonal lumen summary all values represent use with Pyrex lens. candela 6657 6190 5323 5409 879 14 5 0 0 0 0 lumens 4574 5422 5437 5437 0 5437 lumens 588 1529 2457 848 12 3 0 0 0 % lamp 58.3 69.1 69.3 69.3 0.0 69.3 6.0 184.9 6.5 8.0 104.0 8.7 10.0 66.6 10.9 12.0 46.2 13.0 14.0 34.0 15.2 16.0 26.0 17.4 horizontal distance from CL of Downlite (ft.) feet. 15 16 17 18 19 vertical 20 distance from 21 Downlite to 22 workplane 23 24 25 27 30 33 36 ceiling wall room cavity ratio 0 1 2 3 4 5 6 7 8 9 10 0 29.6 26.0 23.0 20.5 18.4 16.6 15.1 13.8 12.6 11.6 10.7 9.1 7.4 6.1 5.1 70% 82 79 75 72 69 65 62 59 57 54 52 2 26.2 23.2 20.7 18.6 16.7 15.2 13.8 12.6 11.6 10.7 9.9 8.5 7.0 5.8 4.9 4 21.4 19.3 17.5 15.9 14.6 13.4 12.4 11.4 10.6 9.8 9.1 7.9 6.6 5.5 4.6 80% 50% 30% 10% 82 82 82 77 75 74 72 70 67 68 65 62 64 60 57 60 56 53 57 53 50 53 50 47 51 47 44 48 44 41 45 42 39 6 19.1 17.2 15.5 14.0 12.7 11.6 10.7 9.9 9.2 8.6 8.0 7.1 6.0 5.1 4.4 8 15.4 14.8 13.8 12.7 11.7 10.8 9.9 9.2 8.5 7.9 7.3 6.4 5.3 4.6 4.0 70% 81 77 74 71 67 64 61 59 56 53 51 10 4.6 7.1 9.0 9.7 9.9 9.5 9.0 8.4 7.9 7.4 6.9 6.1 5.0 4.3 3.7 12 0.3 0.8 1.5 3.2 4.7 5.8 6.6 6.8 6.9 6.6 6.3 5.7 4.8 4.1 3.5 14 16 18 20 22 24 26 28 0.1 0.1 0.3 0.7 1.2 3.4 3.3 4.1 4.7 4.9 5.0 4.5 3.9 3.4 0.1 0.2 0.3 0.7 1.0 1.8 2.4 3.4 3.8 3.6 3.2 0.1 0.1 0.2 0.3 0.6 1.4 2.6 3.0 2.9 0.1 0.1 0.3 1.2 2.0 2.4 0.1 0.3 1.0 1.6 0.1 0.3 0.8 0.1 0.3 0.1 70% 50% 30% 10% 81 81 81 76 74 73 71 69 67 67 64 61 63 60 57 59 56 53 56 52 50 53 49 47 50 46 44 48 44 41 45 41 39 50% 77 73 69 65 61 58 55 52 49 47 45 50% 30% 10% 77 77 72 71 67 65 63 60 59 56 55 53 52 49 49 46 46 44 44 41 41 39 30% 50% 30% 10% 74 74 74 70 69 68 67 65 64 63 61 60 60 58 56 57 54 52 54 51 49 51 48 46 49 46 44 46 43 41 44 41 39 30 10% 50% 30% 10% 71 71 71 68 67 67 65 64 61 62 60 59 59 57 55 56 54 52 53 51 49 51 48 46 48 45 43 46 43 41 44 41 39 1/00 Page 104 A <PREVIOUS PAGE Diameter in feet TOTAL LUMINAIRE EFFICIENCY = 69.3% 1. all calculated footcandle values and photometric data are based on the use of a 400 watt 7850 lumens frosted mini-can screw base tungsten halogen lamp and ITL report 47864. 2. all footcandle values are initial; inservice values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium, .80; poor, .75). 3. maximum spacing to mounting height ratio above workplane: .90 4. for gold anodized reflectors, multiply readings by .85 5. for extended lamp life use 130v. lamp and multiply readings by .75 * by zonal-cavity method, IES preferred practice. FC % fixture 84.1 99.7 100.0 100.0 0.0 100.0 point-by-point footcandle calculations* coefficients of utilization,* floor cavity reflectance: 20% Mounting Height in feet <<RETURN © 2000 Rambusch Lighting, NY NEXT> 500 Watt Quartz 60° Beam Recessed Downlite Conoid & Multi-Groove Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-4687 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 *17.0 foot minimum ceiling height CONE OF LIGHT DIAGRAM, 90% OF LIGHT IN BEAM PATTERN I.T.L. Report # 48330 (diameter shown is where fc value is half the fc at nadir) angle 0 5 15 25 35 45 55 65 75 85 90 luminaire distribution data mean vertical* for 400 watt unit see page 104 A zone 0-30 0-40 0-60 0-90 90-180 0-180 zonal lumen summary all values represent use with Pyrex lens. candela 6699 6625 5520 5349 2243 17 0 0 0 0 0 lumens 4661 6162 6183 6183 0 6183 lumens 622 1583 2456 1501 22 0 0 0 0 % lamp 49.1 64.9 65.1 65.1 0.0 65.1 6.0 186.1 6.7 8.0 104.7 9.0 10.0 67.0 11.2 12.0 46.5 13.5 14.0 34.2 15.7 16.0 26.2 18.0 horizontal distance from CL of Downlite (ft.) feet. 15 16 17 18 19 vertical 20 distance from 21 Downlite to 22 workplane 23 24 25 27 30 33 36 ceiling wall room cavity ratio 0 1 2 3 4 5 6 7 8 9 10 0 29.8 26.2 23.2 20.7 18.6 16.7 15.2 13.8 12.7 11.6 10.7 9.2 7.4 6.2 5.2 70% 77 74 71 67 64 61 58 55 52 50 47 2 27.9 24.8 22.1 19.8 17.9 16.2 14.8 13.5 12.4 11.4 10.5 9.0 7.3 6.1 5.1 4 22.2 20.2 18.5 17.0 15.6 14.3 13.2 12.3 11.4 10.5 9.8 8.5 7.0 5.8 5.0 80% 50% 30% 10% 77 77 77 72 71 69 67 65 63 63 60 57 59 56 53 55 52 49 52 48 46 49 45 43 46 42 40 44 40 37 41 38 35 6 19.2 17.2 15.6 14.1 12.8 11.9 11.0 10.2 9.6 9.0 8.5 7.5 6.4 5.4 4.7 8 15.8 14.7 13.7 12.7 11.7 10.8 10.0 9.2 8.5 7.9 7.4 6.5 5.5 4.8 4.2 70% 76 72 69 66 63 60 57 54 51 49 47 10 8.4 10.4 10.7 10.5 10.0 9.4 8.9 8.4 7.9 7.4 6.9 6.1 5.1 4.3 3.8 12 1.1 2.3 4.0 5.8 7.1 7.4 7.4 7.1 6.9 6.5 6.2 5.6 4.8 4.1 3.5 70% 50% 30% 10% 76 76 76 71 69 68 66 64 62 62 59 57 58 55 53 55 51 49 52 48 45 49 45 42 46 42 40 43 40 37 41 37 35 14 0.1 0.2 0.5 1.1 2.1 3.1 4.3 5.2 5.4 5.5 5.4 5.0 4.4 3.9 3.4 50% 72 68 64 60 57 54 51 48 45 43 40 16 18 20 22 24 26 28 30 0.1 0.1 0.3 0.6 1.0 1.8 2.5 3.3 3.9 4.2 3.9 3.5 3.2 0.1 0.2 0.4 0.6 1.0 1.5 2.6 3.3 3.2 2.9 0.1 0.1 0.2 0.4 1.0 2.1 2.6 2.6 0.1 0.3 0.9 1.7 2.2 0.1 0.3 0.8 1.5 0.1 0.3 0.7 0.1 0.3 0.1 50% 30% 10% 72 72 67 66 62 61 58 56 54 52 51 48 47 45 45 42 42 40 39 37 37 35 30% 50% 30% 10% 69 69 69 66 65 64 62 61 59 59 57 55 56 53 51 53 50 48 50 47 45 47 44 42 44 42 39 42 39 37 40 37 35 10% 50% 30% 10% 66 66 66 64 63 62 61 59 58 57 56 54 54 52 51 52 49 48 49 46 45 46 44 42 44 41 39 42 39 37 39 37 35 1/00 Page 104 B <PREVIOUS PAGE Diameter in feet TOTAL LUMINAIRE EFFICIENCY = 65.1% 1. all calculated footcandle values and photometric data are based on the use of a 500 watt 9500 lumens frosted mini-can screw base tungsten halogen lamp and ITL report 48330. 2. all footcandle values are initial; inservice values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium, .80; poor, .75). 3. maximum spacing to mounting height ratio above workplane: 1.0 4. for gold anodized reflectors, multiply readings by .85 5. for extended lamp life use 130v. lamp and multiply readings by .75 * by zonal-cavity method, IES preferred practice. FC % fixture 75.4 99.6 100.0 100.0 0.0 100.0 point-by-point footcandle calculations* coefficients of utilization,* floor cavity reflectance: 20% Mounting Height in feet <<RETURN © 2000 Rambusch Lighting, NY NEXT> 250 Watt Quartz 45° Beam Recessed Downlite Twist-loc & Mini-baffle 17.0 foot minimum ceiling height Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 angle 62.50 57.50 52.50 47.50 42.50 37.50 32.50 27.50 22.50 17.50 12.50 7.50 2.50 0.00 E.T.L. Report # 423870 luminaire distribution data mean vertical cp 0.0 1.7 1.5 2.2 5.9 18.4 127 838 3890 6510 5860 6280 6860 6810 0 - 30 0 - 40 0 - 60 0 - 90 0 - 180 light flux values lumens acct. 3458 3458 3458 3457 3456 3454 3448 3411 3200 3260 1310 610 160 0 71.1 72.0 72.1 72.1 72.1 angle 47.50 52.50 52.50 62.50 luminaires brightness foot lamberts lumens 0 0 0 0 2 6 37 212 820 1070 700 450 160 0 2,000 3,000 4,000 5,000 6,000 7,000 40 o 40 o 35 o average 75 56 32 0 25 o 0 o 5 15 o o horizontal distance from CL of Downlite (ft.) 1. all calculated footcandle values and photometric data are based on the use of a 250 watt 4800 lumens frosted mini-can screw base tungsten halogen lamp and ETL report No. 423870. 2. all footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium, .80; poor, .75). 3. maximum spacing to mounting height ratio above workplane: .7 4. for gold anodized reflectors, multiply readings by .85 5. for extended lamp life use 130v lamp and multiple readings by .75 6. in compliance with lamp manufacturer’s recommendations a protective clear borosilicate disc is available. Multiply readings by .88 vertical distance from Downlite to workplane ceiling wall coefficients of utilization,* floor cavity reflectance: 20% room cavity ratio 1 2 3 4 5 6 7 8 9 10 Page 105 <PREVIOUS PAGE 1,000 % % % % % point-by-point footcandle calculations * by zonal-cavity method, IES preferred practice. E.T. L. Report No.423870 ft. 15 16 17 18 19 20 21 22 23 24 25 27 30 50% .82 .79 .76 .74 .72 .70 .68 .66 .65 .63 80% 30% .81 .77 .74 .72 .69 .68 .66 .64 .62 .61 0 30.2 26.6 23.6 21.0 18.9 17.0 15.5 14.1 12.9 11.8 10.9 9.3 7.6 10% .80 .75 .73 .70 .67 .66 .64 .62 .60 .59 2 27.0 24.2 21.5 19.6 17.6 16.4 14.8 13.5 12.7 11.6 10.7 9.1 7.7 50% .80 .78 .75 .73 .71 .70 .68 .66 .64 .63 4 24.8 21.6 18.9 17.0 15.3 14.1 12.9 11.9 11.0 10.1 9.5 8.3 6.7 70% 30% .79 .76 .74 .71 .69 .67 .65 .64 .62 .61 6 14.8 15.0 16.6 16.5 15.0 14.1 12.7 11.4 10.6 9.6 8.9 7.6 6.3 10% .78 .75 .72 .69 .67 .66 .64 .62 .60 .59 8 2.3 3.2 6.1 7.0 7.8 8.3 8.7 8.9 9.1 9.2 8.6 7.8 6.2 50% .78 .75 .74 .72 .70 .69 .67 .65 .64 .63 10 0.2 0.5 1.1 1.3 1.5 2.0 3.9 3.7 4.3 4.9 5.3 5.9 5.9 50% 30% .77 .74 .72 .70 .68 .67 .65 .63 .62 .60 10% .76 .73 .71 .69 .67 .65 .63 .62 .60 .59 12 14 16 18 20 0.1 0.1 0.2 0.3 0.5 0.7 0.9 1.0 1.4 2.1 3.1 3.7 0.1 0.1 0.1 0.1 0.4 0.5 0.7 1.1 2.0 0.1 0.1 0.1 0.3 0.6 0.1 0.2 0.1 50% .75 .73 .72 .71 .69 .68 .66 .65 .63 .62 30% 30% .74 .72 .71 .69 .67 .66 .64 .63 .61 .60 10% .74 .71 .70 .68 .66 .65 .63 .62 .60 .59 50% .73 .71 .71 .70 .68 .67 .66 .64 .63 .62 10% 30% .72 .71 .70 .68 .67 .66 .64 .63 .61 .60 10% .72 .70 .69 .67 .66 .64 .63 .61 .60 .59 1/00 <<RETURN © 2000 Rambusch Lighting, NY NEXT> 250 Watt Quartz 45° Beam Recessed Downlite Conoid & Multi-Groove Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 17.0 foot minimum ceiling height angle 62.50 57.50 52.50 47.50 42.50 37.50 32.50 27.50 22.50 17.50 12.50 7.50 2.50 0.00 E.T.L. Report # 423870 luminaire distribution data mean vertical cp 0.0 1.7 1.5 2.2 5.9 18.4 127 838 3890 6510 5860 6280 6860 6810 0 - 30 0 - 40 0 - 60 0 - 90 0 - 180 light flux values lumens acct. 3458 3458 3458 3457 3456 3454 3448 3411 3200 3260 1310 610 160 0 71.1 72.0 72.1 72.1 72.1 angle 47.50 52.50 52.50 62.50 luminaires brightness foot lamberts lumens 0 0 0 0 2 6 37 212 820 1070 700 450 160 0 2,000 3,000 4,000 5,000 6,000 7,000 40 o 40 o 35 o average 75 56 32 0 25 o 0 o 5 15 o o horizontal distance from CL of Downlite (ft.) 1. all calculated footcandle values and photometric data are based on the use of a 250 watt 4800 lumens frosted mini-can screw base tungsten halogen lamp and ETL report No. 423870. 2. all footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium, .80; poor, .75). 3. maximum spacing to mounting height ratio above workplane: .7 4. for gold anodized reflectors, multiply readings by .85 5. for extended lamp life use 130v lamp and multiple readings by .75 6. in compliance with lamp manufacturer’s recommendations a protective clear borosilicate disc is available. Multiply readings by .88 vertical distance from Downlite to workplane ceiling wall coefficients of utilization,* floor cavity reflectance: 20% room cavity ratio 1 2 3 4 5 6 7 8 9 10 Page 106 <PREVIOUS PAGE 1,000 % % % % % point-by-point footcandle calculations * by zonal-cavity method, IES preferred practice. E.T. L. Report No.423870 ft. 15 16 17 18 19 20 21 22 23 24 25 27 30 50% .82 .79 .76 .74 .72 .70 .68 .66 .65 .63 80% 30% .81 .77 .74 .72 .69 .68 .66 .64 .62 .61 0 30.2 26.6 23.6 21.0 18.9 17.0 15.5 14.1 12.9 11.8 10.9 9.3 7.6 10% .80 .75 .73 .70 .67 .66 .64 .62 .60 .59 2 27.0 24.2 21.5 19.6 17.6 16.4 14.8 13.5 12.7 11.6 10.7 9.1 7.7 50% .80 .78 .75 .73 .71 .70 .68 .66 .64 .63 4 24.8 21.6 18.9 17.0 15.3 14.1 12.9 11.9 11.0 10.1 9.5 8.3 6.7 70% 30% .79 .76 .74 .71 .69 .67 .65 .64 .62 .61 6 14.8 15.0 16.6 16.5 15.0 14.1 12.7 11.4 10.6 9.6 8.9 7.6 6.3 10% .78 .75 .72 .69 .67 .66 .64 .62 .60 .59 8 2.3 3.2 6.1 7.0 7.8 8.3 8.7 8.9 9.1 9.2 8.6 7.8 6.2 50% .78 .75 .74 .72 .70 .69 .67 .65 .64 .63 10 0.2 0.5 1.1 1.3 1.5 2.0 3.9 3.7 4.3 4.9 5.3 5.9 5.9 50% 30% .77 .74 .72 .70 .68 .67 .65 .63 .62 .60 10% .76 .73 .71 .69 .67 .65 .63 .62 .60 .59 12 14 16 18 20 0.1 0.1 0.2 0.3 0.5 0.7 0.9 1.0 1.4 2.1 3.1 3.7 0.1 0.1 0.1 0.1 0.4 0.5 0.7 1.1 2.0 0.1 0.1 0.1 0.3 0.6 0.1 0.2 0.1 50% .75 .73 .72 .71 .69 .68 .66 .65 .63 .62 30% 30% .74 .72 .71 .69 .67 .66 .64 .63 .61 .60 10% .74 .71 .70 .68 .66 .65 .63 .62 .60 .59 50% .73 .71 .71 .70 .68 .67 .66 .64 .63 .62 10% 30% .72 .71 .70 .68 .67 .66 .64 .63 .61 .60 10% .72 .70 .69 .67 .66 .64 .63 .61 .60 .59 1/00 <<RETURN © 2000 Rambusch Lighting, NY NEXT> 500 Watt Quartz 45° Beam Recessed Downlite Twist-loc & Mini-baffle Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 22.0 foot minimum ceiling height angle 47.50 42.50 37.50 32.50 27.50 22.50 17.50 12.50 7.50 2.50 0.00 E.T.L. Report # 424063 luminaire distribution data mean vertical cp 0.0 31.1 51.1 265 2120 7610 13270 13940 14410 14320 14060 lumens 0 11 17 78 540 1600 2190 1650 1030 340 0 E.T. L. Report No.424063 lumens acct. 7454 7454 7443 7426 7350 6810 5210 3030 1370 340 0 2,000 4,000 6,000 8,000 10,000 light flux values 0 - 30 0 - 40 0 - 60 12,000 70.0 % 71.0 % 71.0 % 14,000 40 o 40 o 35 angle 45 55 65 75 85 luminaires brightness foot lamberts average 326 240 150 160 190 25 o 0 point-by-point footcandle calculations o 5 o 15 o horizontal distance from CL of Downlite (ft.) 1. all calculated footcandle values and photometric data are based on the use of a 500 watt 10,500 lumens frosted mini-can screw base tungsten halogen lamp and ETL report No. 424063. 2. all footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium, .80; poor, .75). 3. maximum spacing to mounting height ratio above workplane: .7 4. for gold anodized reflectors, multiply readings by .85 5. for extended lamp life use 130v lamp and multiple readings by .75 6. in compliance with lamp manufacturer’s recommendations a protective clear borosilicate disc is available. Multiply readings by .88 vertical distance from Downlite to workplane ceiling wall coefficients of utilization,* floor cavity reflectance: 20% room cavity ratio * by zonal-cavity method, IES preferred practice. o 1 2 3 4 5 6 7 8 9 10 Page 107 ft. 20 21 22 23 24 25 27 30 33 36 40 45 50 55 60 70 0 35.1 31.9 29.1 26.5 24.4 22.5 19.2 15.6 12.9 10.8 8.8 6.9 5.6 4.7 3.9 2.8 50% .81 .77 .75 .73 .70 .68 .66 .65 .63 .61 2 35.3 32.1 29.4 26.8 24.7 22.7 19.5 15.9 13.0 11.0 8.9 7.0 5.7 4.7 4.0 2.9 80% 30% .79 .76 .73 .70 .68 .66 .64 .62 .60 .59 4 33.2 30.2 27.8 25.7 23.5 22.0 19.1 15.5 12.9 10.9 8.9 7.0 5.7 4.8 4.0 2.9 10% .78 .74 .71 .68 .66 .64 .62 .60 .59 .57 6 29.3 27.0 25.1 23.2 21.7 20.2 17.9 14.7 12.3 10.5 8.6 6.9 5.6 4.6 3.9 2.9 50% .79 .76 .74 .72 .70 .68 .66 .64 .63 .61 8 17.0 18.9 19.7 19.8 19.4 18.1 16.1 13.6 11.6 10.0 8.3 6.7 5.5 4.6 3.9 2.9 70% 30% .78 .75 .72 .70 .67 .66 .64 .62 .60 .59 10 4.5 6.6 6.7 7.4 9.1 10.8 13.0 12.5 10.7 9.2 7.8 6.4 5.3 4.6 3.8 2.9 10% .77 .73 .70 .68 ,66 .64 .62 .60 .59 .57 12 1.0 1.4 1.9 2.3 3.1 3.7 5.3 7.5 8.8 8.7 7.3 6.2 5.1 4.3 3.6 2.9 14 0.2 0.2 0.2 0.7 1.1 1.5 2.3 3.4 4.8 6.4 6.6 5.7 4.9 4.1 3.6 2.7 50% .76 .74 .72 .70 .69 .67 .65 .64 .62 .61 16 0.1 0.1 0.1 0.1 0.2 0.2 0.5 1.4 2.1 3.0 4.3 4.8 4.6 3.9 3.4 2.7 50% 30% .75 .73 .71 .69 .67 .65 .63 .62 .60 .58 10% .75 .72 .69 .67 .65 .64 .62 .60 .58 .57 18 20 22 24 26 28 30 0.1 0.1 0.1 0.4 0.8 1.4 2.4 3.4 3.8 3.7 3.2 2.5 0.1 0.3 0.7 1.1 1.9 2.8 3.1 3.0 2.4 0.1 0.1 0.3 0.5 1.2 1.6 2.2 2.7 2.4 0.1 0.2 0.6 1.0 1.3 1.9 2.1 0.1 0.3 0.7 1.0 1.4 1.9 0.1 0.6 0.5 0.8 1.4 0.2 0.3 0.5 1.1 50% .74 .72 .71 .69 .68 .66 .65 .63 .62 .60 30% 30% .73 .71 .69 .68 .66 .64 .63 .61 .60 .58 10% .72 .70 .68 .66 .65 .63 .61 .60 .58 .57 50% .71 .70 .69 .68 .67 .66 .64 .63 .61 .60 10% 30% .71 .69 .68 .67 .65 .64 .62 .61 .59 .58 10% .70 .69 .67 .66 .64 .63 .61 .60 .58 .57 1/00 © 2000 Rambusch Lighting, NY <PREVIOUS PAGE <<RETURN NEXT> 500 Watt Quartz 45° Beam Recessed Downlite Conoid & Multi-Groove Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 22.0 foot minimum ceiling height angle 47.50 42.50 37.50 32.50 27.50 22.50 17.50 12.50 7.50 2.50 0.00 E.T.L. Report # 424063 luminaire distribution data mean vertical cp 0.0 31.1 51.1 265 2120 7610 13270 13940 14410 14320 14060 lumens 0 11 17 78 540 1600 2190 1650 1030 340 0 E.T. L. Report No.424063 lumens acct. 7454 7454 7443 7426 7350 6810 5210 3030 1370 340 0 2,000 4,000 6,000 8,000 10,000 light flux values 0 - 30 0 - 40 0 - 60 12,000 70.0 % 71.0 % 71.0 % 14,000 40 o angle 45 55 65 75 85 luminaires brightness foot lamberts average 326 240 150 160 190 25 o 0 point-by-point footcandle calculations o 5 o 15 o horizontal distance from CL of Downlite (ft.) 1. all calculated footcandle values and photometric data are based on the use of a 500 watt 10,500 lumens frosted mini-can screw base tungsten halogen lamp and ETL report No. 424063. 2. all footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium, .80; poor, .75). 3. maximum spacing to mounting height ratio above workplane: .7 4. for gold anodized reflectors, multiply readings by .85 5. for extended lamp life use 130v lamp and multiple readings by .75 6. in compliance with lamp manufacturer’s recommendations a protective clear borosilicate disc is available. Multiply readings by .88 vertical distance from Downlite to workplane ceiling wall coefficients of utilization,* floor cavity reflectance: 20% room cavity ratio * by zonal-cavity method, IES preferred practice. 40 o 35 o 1 2 3 4 5 6 7 8 9 10 Page 108 ft. 20 21 22 23 24 25 27 30 33 36 40 45 50 55 60 70 0 35.1 31.9 29.1 26.5 24.4 22.5 19.2 15.6 12.9 10.8 8.8 6.9 5.6 4.7 3.9 2.8 50% .81 .77 .75 .73 .70 .68 .66 .65 .63 .61 2 35.3 32.1 29.4 26.8 24.7 22.7 19.5 15.9 13.0 11.0 8.9 7.0 5.7 4.7 4.0 2.9 80% 30% .79 .76 .73 .70 .68 .66 .64 .62 .60 .59 4 33.2 30.2 27.8 25.7 23.5 22.0 19.1 15.5 12.9 10.9 8.9 7.0 5.7 4.8 4.0 2.9 10% .78 .74 .71 .68 .66 .64 .62 .60 .59 .57 6 29.3 27.0 25.1 23.2 21.7 20.2 17.9 14.7 12.3 10.5 8.6 6.9 5.6 4.6 3.9 2.9 50% .79 .76 .74 .72 .70 .68 .66 .64 .63 .61 8 17.0 18.9 19.7 19.8 19.4 18.1 16.1 13.6 11.6 10.0 8.3 6.7 5.5 4.6 3.9 2.9 70% 30% .78 .75 .72 .70 .67 .66 .64 .62 .60 .59 10 4.5 6.6 6.7 7.4 9.1 10.8 13.0 12.5 10.7 9.2 7.8 6.4 5.3 4.6 3.8 2.9 10% .77 .73 .70 .68 ,66 .64 .62 .60 .59 .57 12 1.0 1.4 1.9 2.3 3.1 3.7 5.3 7.5 8.8 8.7 7.3 6.2 5.1 4.3 3.6 2.9 14 0.2 0.2 0.2 0.7 1.1 1.5 2.3 3.4 4.8 6.4 6.6 5.7 4.9 4.1 3.6 2.7 50% .76 .74 .72 .70 .69 .67 .65 .64 .62 .61 16 0.1 0.1 0.1 0.1 0.2 0.2 0.5 1.4 2.1 3.0 4.3 4.8 4.6 3.9 3.4 2.7 50% 30% .75 .73 .71 .69 .67 .65 .63 .62 .60 .58 10% .75 .72 .69 .67 .65 .64 .62 .60 .58 .57 18 20 22 24 26 28 30 0.1 0.1 0.1 0.4 0.8 1.4 2.4 3.4 3.8 3.7 3.2 2.5 0.1 0.3 0.7 1.1 1.9 2.8 3.1 3.0 2.4 0.1 0.1 0.3 0.5 1.2 1.6 2.2 2.7 2.4 0.1 0.2 0.6 1.0 1.3 1.9 2.1 0.1 0.3 0.7 1.0 1.4 1.9 0.1 0.6 0.5 0.8 1.4 0.2 0.3 0.5 1.1 50% .74 .72 .71 .69 .68 .66 .65 .63 .62 .60 30% 30% .73 .71 .69 .68 .66 .64 .63 .61 .60 .58 10% .72 .70 .68 .66 .65 .63 .61 .60 .58 .57 50% .71 .70 .69 .68 .67 .66 .64 .63 .61 .60 10% 30% .71 .69 .68 .67 .65 .64 .62 .61 .59 .58 10% .70 .69 .67 .66 .64 .63 .61 .60 .58 .57 1/00 © 2000 Rambusch Lighting, NY <PREVIOUS PAGE <<RETURN NEXT> 150/250/500W Quartz 45°/60° Beam Downlite Pendant & Bracket Mount Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 For all Photometric data please refer to the following catalog pages: For fixture: Refer to: PD or BD-60-150-Q (60° beam with 150W lamp) RD-60-150-Q Page 101A or 102A PD or BD-60-250-Q (60° beam with 250W lamp) RD-60-250-Q Page 101B or 102B PD or BD-60-400-Q (60° beam with 400W lamp) RD-60-400-Q Page 103A or 104A PD or BD-60-500-Q (60° beam with 500W lamp) RD-60-500-Q Page 103B or 104B PD or BD-45-250-Q (45° beam with 250W lamp) RD-45-250-Q Page 105 or 106 PD or BD-45-500-Q (45° beam with 500W lamp) RD-45-500-Q Page 107 or 108 The above catalog pages contain the following photometric reports: ■ Point-bypoint footcandle calculations ■ Coefficients of utilization ■ Luminous distribution data ■ Light flux values ■ Luminous brightness foot lamberts Page 121 <PREVIOUS PAGE 10/98 <<RETURN © 1998 Rambusch Lighting, NY NEXT> 100/150/200W A21 80° beam Softlite TM Recessed Downlite Conoid & Multi-Groove Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 7.5 foot minimum ceiling height angle 72.5 67.5 62.5 57.5 52.5 47.5 42.5 37.5 32.5 27.5 22.5 17.5 12.5 7.5 2.5 0.0 Rambusch Report # 012477 luminaire distribution data mean vertical cp 0 0 2 8 31 89 196 612 1037 1157 1262 1235 1075 940 888 880 0 - 30 0 - 40 0 - 60 0 - 90 0 - 180 light flux values lumens 0 0 1 3 13 36 72 204 305 293 264 203 127 67 21 0 lumens acct. 1609 1609 1592 1589 1584 1572 1542 1476 1311 1025 727 441 231 91 22 0 34.2 52.1 56.3 56.4 56.4 Rambusch Report No.012477 200 400 600 800 1000 % % % % % 1200 40 o 40 o 30 o 30 o 20 angle 62.50 67.50 luminaires brightness foot lamberts o 20 average 232 93 10 o 0 o o 10 o point-by-point footcandle calculations horizontal distance from CL of Downlite (ft.) 1. all calculated footcandle values and photometric data are based on the use of a 150 watt 2850 lumen inside frosted A-21 lamp and Rambusch report No. 012477. 2. all footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .80; medium, .75; poor, .70). 3. maximum spacing to mounting height ratio above workplane: 1.25 4. for gold anodized reflectors, multiply readings by .85 vertical distance from Downlite to workplane ceiling wall coefficients of utilization,* floor cavity reflectance: 20% room cavity ratio * by zonal-cavity method, IES preferred practice. 1 2 3 4 5 6 7 8 9 10 Page 131 <PREVIOUS PAGE ft. 5 6 7 8 9 10 11 12 13 14 15 50% .56 .53 .51 .48 .46 .43 .41 .39 .37 .33 80% 30% .55 .52 .49 .46 .43 .41 .39 .36 .34 .30 0 35.2 24.4 17.9 13.7 10.8 8.8 7.2 6.1 5.2 4.4 3.9 10% .54 .50 .47 .44 .41 .39 .37 .34 .32 .28 2 39.3 29.1 23.6 16.2 12.9 10.9 8.5 7.0 5.9 4.9 4.3 50% .55 .53 .50 .47 .45 .43 .41 .39 .36 .32 4 5.9 12.9 15.2 12.9 11.2 9.9 8.7 7.2 6.2 5.3 4.6 70% 30% .54 .51 .48 .45 .43 .41 .38 .36 .34 .30 6 .1 .6 1.6 4.0 5.6 6.6 6.4 5.7 5.2 4.8 4.4 10% .53 .50 .47 .44 .41 .39 .37 .34 .32 .28 8 10 12 14 16 18 .1 .2 .37 .8 1.5 2.6 3.1 3.5 3.8 3.5 .03 .09 .16 .24 .52 .68 1.2 1.6 2.0 .05 .07 .11 .16 .29 .41 .65 .04 .06 .09 .08 .16 .03 .03 .05 .02 50% .53 .51 .49 .46 .44 .42 .40 .38 .36 .32 50% 30% .52 .50 .47 .45 .42 .40 .38 .36 .34 .30 10% .52 .49 .46 .43 .41 .39 .37 .34 .32 .28 50% .51 .49 .48 .45 .44 .42 .40 .38 .35 .32 30% 30% .51 .49 .46 .44 .42 .40 .38 .36 .33 .29 10% .50 .48 .45 .43 .41 .38 .36 .34 .32 .28 50% .50 .48 .47 .45 .43 .41 .39 .37 .35 .31 20 10% 30% .49 .47 .46 .43 .41 .39 .37 .35 .33 .29 10% .49 .47 .45 .42 .40 .38 .36 .34 .32 .28 1/00 <<RETURN © 2000 Rambusch Lighting, NY NEXT> 100/150/200W A21 80° beam Softlight TM Recessed Downlite Twist-loc & Mini-baffle Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 7.5 foot minimum ceiling height angle 72.5 67.5 62.5 57.5 52.5 47.5 42.5 37.5 32.5 27.5 22.5 17.5 12.5 7.5 2.5 0.0 E.T.L. Report # 438193 luminaire distribution data mean vertical cp 0 1.6 4.7 9.3 26.4 66.7 163 450 864 1090 1210 1180 1060 886 832 807 0 - 30 0 - 40 0 - 60 0 - 90 0 - 180 light flux values lumens 0 0 2 4 11 26 60 150 254 280 250 190 130 20 20 0 lumens acct. 1445 1445 1444 1442 1437 1426 1399 1339 1189 930 660 400 210 20 20 0 31.9 47.1 50.1 50.2 50.2 E.T.L. Report No.438193 250 500 750 1000 % % % % % 1250 40 o 40 o 30 o 30 o 20 angle 62.50 67.50 luminaires brightness foot lamberts 0 o o 10 o horizontal distance from CL of Downlite (ft.) 1. all calculated footcandle values and photometric data are based on the use of a 150 watt 2880 lumen inside frosted A-21 lamp and ETL report No. 438193. 2. all footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .80; medium, .75; poor, .70). 3. maximum spacing to mounting height ratio above workplane: 1.25 4. for gold anodized reflectors, multiply readings by .85 vertical distance from Downlite to workplane ceiling wall coefficients of utilization,* floor cavity reflectance: 20% room cavity ratio 1 2 3 4 5 6 7 8 9 10 Page 132 <PREVIOUS PAGE 20 10 o average 232 93 point-by-point footcandle calculations * by zonal-cavity method, IES preferred practice. o ft. 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 50% .56 .53 .51 .48 .46 .43 .41 .39 .37 .33 80% 30% .55 .52 .49 .46 .43 .41 .39 .36 .34 .30 0 32.3 22.4 16.5 12.6 10.0 8.1 6.7 5.6 4.8 4.1 3.6 3.2 2.8 2.5 2.2 2.0 10% .54 .50 .47 .44 .41 .39 .37 .34 .32 .28 2 38.6 28.1 20.8 15.6 12.3 9.5 7.7 6.3 5.4 4.5 3.9 3.4 3.0 2.6 2.4 2.1 50% .55 .53 .50 .47 .45 .43 .41 .39 .36 .32 4 6.9 11.8 12.9 12.3 11.1 9.7 8.2 7.0 6.0 5.2 4.5 3.9 3.4 3.1 2.7 2.4 70% 30% .54 .51 .48 .45 .43 .41 .38 .36 .34 .30 6 0.4 1.1 2.2 3.9 5.3 5.8 5.7 5.5 5.1 4.7 4.3 3.9 3.4 3.1 2.8 2.6 10% .53 .50 .47 .44 .41 .39 .37 .34 .32 .28 8 0.1 0.2 0.3 0.6 1.0 1.7 2.5 3.0 3.2 3.2 3.3 3.1 2.9 2.8 2.6 2.4 50% .53 .51 .49 .46 .44 .42 .40 .38 .36 .32 50% 30% .52 .50 .47 .45 .42 .40 .38 .36 .34 .30 10 12 14 16 18 20 0.1 0.1 0.2 0.4 0.6 1.0 1.2 1.6 1.9 2.1 2.1 2.1 2.0 2.0 0.1 0.1 0.2 0.3 0.4 0.6 0.8 1.0 1.2 1.3 1.5 1.5 0.1 0.1 0.1 0.2 0.3 0.4 0.6 0.6 0.8 0.9 0.1 0.1 0.1 0.2 0.2 0.2 0.6 0.4 0.1 0.1 0.1 0.1 0.2 0.2 0.1 .01 0.1 10% .52 .49 .46 .43 .41 .39 .37 .34 .32 .28 50% .51 .49 .48 .45 .44 .42 .40 .38 .35 .32 30% 30% .51 .49 .46 .44 .42 .40 .38 .36 .33 .29 10% .50 .48 .45 .43 .41 .38 .36 .34 .32 .28 50% .50 .48 .47 .45 .43 .41 .39 .37 .35 .31 10% 30% .49 .47 .46 .43 .41 .39 .37 .35 .33 .29 10% .49 .47 .45 .42 .40 .38 .36 .34 .32 .28 1/00 <<RETURN © 2000 Rambusch Lighting, NY NEXT> 100/150/200w A lamp Pendant Softlite Downlite Pendant / Bracket / Surface *7.5 foot minimum ceiling height Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 angle 72.50 67.50 62.50 57.50 52.50 47.50 42.50 37.50 32.50 27.50 22.50 17.50 12.50 7.50 2.50 0 E.T.L. Report # 938193 luminaire distribution data mean vertical* cp 0.0 1.6 1.6 9.3 26.4 66.7 163 450 864 1090 1210 1180 1060 886 832 807 52.50 47.50 42.50 37.50 32.50 light flux values lumens acct. 1445 1445 1444 1442 1437 1426 1399 1399 1189 930 660 400 210 83 20 0 500 750 1000 40 o 40 o 30 o 30 o 20 average 233 93 o 20 10 o 0 o 10 o o horizontal distance from CL of Downlite (ft.) 1. all calculated footcandle values and photometric data are based on the use of a 150 watt 2880 lumens iside frosted A-21 lamp and ETL report No. 9338193. 2. all footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .80; medium, .75; poor, .70). 3. maximum spacing to mounting height above workplane: 1.25 4. for gold anodized reflectors, multiply readings by .85 vertical distance from Downlite to workplane ceiling wall coefficients of utilization,* floor cavity reflectance: 20% room cavity ratio 1 2 3 4 5 6 7 8 9 10 Page 133 <PREVIOUS PAGE 250 1250 point-by-point footcandle calculations* * by zonal-cavity method, IES preferred practice. E.T.L. Report No.938193 26.4 66.7 163 450 864 angle 62.50 67.50 luminaires brightness foot lamberts lumens 0 0 2 4 11 26 60 150 254 280 250 190 130 63 20 0 ft. 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 50% .56 .53 .51 .48 .46 .43 .41 .39 .37 .33 80% 30% .55 .52 .49 .46 .43 .41 .39 .36 .34 .30 0 32.3 22.4 16.5 12.6 10.0 8.1 6.7 5.6 4.8 4.1 3.6 3.2 2.8 2.5 2.2 2.0 10% .54 .50 .47 .44 .41 .39 .37 .34 .32 .28 2 38.6 18.1 20.8 15.6 12.3 9.5 7.7 6.3 5.4 4.5 3.9 3.4 3.0 2.6 2.4 2.1 50% .55 .53 .50 .47 .45 .43 .41 .39 .36 .32 4 6.9 11.8 12.9 12.3 11.1 9.7 8.2 7.0 6.0 5.2 4.5 3.9 3.4 3.1 2.7 2.4 6 .4 1.1 2.2 3.9 5.3 5.8 5.7 5.5 5.1 4.7 4.3 3.9 3.4 3.1 2.8 2.6 70% 30% 10% .54 84 .51 77 .48 71 .45 66 .43 62 .41 58 .38 55 .36 52 .34 49 .30 47 8 0.1 0.2 0.3 0.6 1.0 1.7 2.5 3.0 3.2 3.2 3.3 3.1 2.9 2.8 2.6 2.4 50% .53 .51 .49 .46 .44 .42 .40 .38 .36 .32 50% 30% .52 .50 .47 .45 .42 .40 .38 .36 .34 .30 10 12 14 16 18 20 0.1 0.1 0.2 0.4 0.6 1.0 1.2 1.6 1.9 2.1 2.1 2.1 2.0 2.0 0.1 0.1 0.2 0.3 0.4 0.6 0.8 1.0 1.2 1.3 1.5 1.5 0.1 0.1 0.1 0.2 0.3 0.4 0.6 0.6 0.8 0.9 0.1 0.1 0.1 0.2 0.2 0.2 0.6 0.4 0.1 0.1 0.1 0.1 0.2 0.2 0.1 0.1 0.1 0.1 10% .52 .49 .46 .43 .41 .39 .37 .34 .32 .28 50% .51 .49 .48 .45 .44 .42 .40 .38 .35 .32 30% 30% .51 .49 .46 .44 .42 .40 .38 .36 .33 .29 10% .50 .48 .45 .43 .41 .38 .36 .34 .32 .28 50% .50 .48 .47 .45 .43 .41 .39 .37 .35 .31 10% 30% .49 .47 .46 .43 .41 .39 .37 .35 .33 .29 10% .49 .47 .45 .42 .40 .38 .36 .34 .32 .28 1/00 <<RETURN © 2000 Rambusch Lighting, NY NEXT> 150/250 Watt PAR 38 FLOOD/SPOT Recessed PAR Downlite Conoid & Multi-Groove Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-4687 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 7.5 foot min. ceiling height 150W 12.0 foot min. ceiling height 250W Q250 PAR 38 FLOOD FLOOD luminaire distribution data means vertical angle cd SPOT lumens cd 2000 lumens _________________________________________ 27.5 249 63 ------_________________________________________ 6000 12.5 5110 606 5126 608 _________________________________________ 7.5 8769 627 12937 925 _________________________________________ 12000 8000 18000 10000 2.5 11380 272 27489 657 _________________________________________ 0 11600 ---28100 ---_________________________________________ 12000 20 o FLOOD 6000 4000 22.5 897 188 ------_________________________________________ 17.5 2025 334 1474 243 _________________________________________ specular black cone Q250 PAR 38 SPOT 10 o 0 o 10 o 24000 20 o 30000 SPOT _________________________________________ 0-10 29% 51% _________________________________________ light flux values 20 o 10 o 0o 10 o 20 o 0-20 59% 78% _________________________________________ 0-30 67% 78% _________________________________________ horizontal distance from CL of Downlite (ft.) point-by-point footcandle calculation ft. 1. All calculated footcandle values and photometric data are based on the use of a 250-watt, 3120 lumen flood lamp. 2. All footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .85; medium .80; poor .75). 3. Maximum space to mounting height above work plane: is .30 for spot and .45 for flood lamp. 0 1 2 3 4 5 6 7 8 9 10 ___________________________________________________________________________________________ 10 116 106 72 35 13 6 ___________________________________________________________________________________________ 11 96 88 63 36 14 6 4 ___________________________________________________________________________________________ 12 81 77 61 38 17 7 4 4 ___________________________________________________________________________________________ 13 69 66 53 37 21 12 5 4 ___________________________________________________________________________________________ 14 60 55 48 32 21 12 7 4 3 ___________________________________________________________________________________________ 15 52 50 42 32 21 13 6 4 3 ___________________________________________________________________________________________ 16 45 44 38 28 20 13 8 5 3 2 ___________________________________________________________________________________________ 18 36 35 37 27 20 14 8 6 3 2 1 ___________________________________________________________________________________________ 20 29 28 27 22 18 14 9 6 3 2 1 ___________________________________________________________________________________________ 22 24 23 22 19 16 13 9 5 4 3 2 ___________________________________________________________________________________________ 24 20 20 19 17 13 11 9 6 4 3 3 ___________________________________________________________________________________________ 27 16 16 15 14 13 10 9 6 5 3 3 ___________________________________________________________________________________________ 30 13 13 13 12 10 10 8 7 5 4 3 ___________________________________________________________________________________________ ceiling % 80 70 50 30 0 ___________________________________________________________________________________________ walls % 70 50 30 10 50 10 50 10 50 10 0 ___________________________________________________________________________________________ room ratio 1 .73 .72 .71 .70 .71 .69 .68 .67 .66 65 .62 ___________________________________________________________________________________________ coefficients of utilization,* floor cavity reflectance: 20% 2 .71 .69 .68 .67 .68 .66 .66 .64 .65 .63 .61 ___________________________________________________________________________________________ 3 .71 .67 .66 .64 .67 .64 .65 .63 .64 .62 .60 ___________________________________________________________________________________________ 4 .68 .66 .64 .62 .66 .62 .64 .61 .63 .61 .59 ___________________________________________________________________________________________ 5 .67 .64 .62 .61 .64 .61 .63 .60 .62 .60 .59 ___________________________________________________________________________________________ 6 .66 .63 .61 .60 .63 .60 .63 .59 .61 .59 .58 ___________________________________________________________________________________________ 7 .65 .62 .60 .59 .62 .59 .61 .58 .60 .58 .57 ___________________________________________________________________________________________ 8 .64 .61 .59 .58 .61 .58 .60 .58 .60 .57 .57 ___________________________________________________________________________________________ 9 .63 .60 .58 .57 .60 .57 .59 .57 .59 .57 .56 ___________________________________________________________________________________________ *by zonal-cavity method, IES prefered practice 10 .62 .59 .57 .56 .59 .56 .58 .56 .58 .56 .55 ___________________________________________________________________________________________ Patent Pending 1/00 Page 141 <PREVIOUS PAGE © 2000 Rambusch Lighting, NY <<RETURN NEXT> 150/250 Watt PAR 38 FLOOD/SPOT Recessed Downlite Twist-loc & Mini-baffle Design Studios: 40 West 13th Street, New York, NY 10011-7989 • Tel 212/675-0400 • Fax 212/620-4687 Workshops: 218-230 South Parkway, Clifton, New Jersey 07014-1314 • Tel 973/778-8899 • Fax 973/778 0072 7.5 foot min. ceiling height 150W 12.0 foot min. ceiling height 250W 150 PAR 38 FLOOD 150 PAR 38 FLOOD FLOOD angle cd 150 PAR 38 SPOT SPOT lumens cd lumens _________________________________________ 37.5 ------------_________________________________________ luminaire distribution data means vertical 32.5 166 49 ------_________________________________________ 27.5 267 68 138 35 _________________________________________ 2000 22.5 372 78 339 71 _________________________________________ 17.5 1407 232 716 118 _________________________________________ 1000 12.5 2125 252 2378 282 _________________________________________ 7.5 2993 214 6587 471 _________________________________________ 4000 2.5 3222 77 8368 200 _________________________________________ 0.0 3450 ---8400 ---_________________________________________ 2000 6000 8000 3000 10000 FLOOD light flux values SPOT _________________________________________ 0-10 17% 39% _________________________________________ 20 o 10 o 4000 0o 10 o 20 o 10 o 5 o 0 o 5 o 10 o 0-20 45% 62% _________________________________________ 0-30 56% 68% _________________________________________ horizontal distance from CL of Downlite (ft.) point-bypoint footcandle calculation ft. 1. All calculated footcandle values and photometric data are based on the use of a 150 watt, 1730 lumen PAR-38 lamp. 2. All footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .8; medium .75; poor .7). 3. Maximum space to mounting height above work plane: is 0.45 for spot and 0.3 for flood lamp. 0 1 2 3 4 5 6 7 8 9 10 ___________________________________________________________________________________________ 5 132 98 22 5 ___________________________________________________________________________________________ 6 92 75 24 8 2 ___________________________________________________________________________________________ 7 67 57 29 12 2 ___________________________________________________________________________________________ 8 52 46 27 10 3 1 ___________________________________________________________________________________________ 9 41 37 25 13 4 2 1 ___________________________________________________________________________________________ 10 33 31 25 12 5 3 1 1 ___________________________________________________________________________________________ 12 23 22 19 12 7 6 2 .5 .2 ___________________________________________________________________________________________ 15 15 14 13 11 7 5 3 1 .6 .3 .13 ___________________________________________________________________________________________ ceiling % 80 70 50 30 0 ___________________________________________________________________________________________ walls % 70 50 30 10 50 10 50 10 50 10 0 ___________________________________________________________________________________________ room ratio 1 .66 .65 .64 .63 .64 .62 .61 .60 .59 .59 .56 ___________________________________________________________________________________________ 2 .64 .62 .60 .59 .61 .58 .59 .57 .57 .56 .54 ___________________________________________________________________________________________ coefficients of utilization,* floor cavity reflectance: 20% 3 .62 .60 .58 .56 .59 .56 .58 .55 .56 .54 .53 ___________________________________________________________________________________________ 4 .60 .58 .55 .54 .57 .54 .56 .53 .55 .52 .51 ___________________________________________________________________________________________ 5 .59 .56 .53 .52 .55 .52 .54 .51 .53 .51 .50 ___________________________________________________________________________________________ 6 .57 .54 .52 .51 .54 .50 .53 .50 .52 .50 .49 ___________________________________________________________________________________________ 7 .56 .53 .51 .49 .52 .49 .52 .49 .51 .49 .48 ___________________________________________________________________________________________ 8 .55 .51 .49 .48 .51 .48 .51 .48 .50 .47 .47 ___________________________________________________________________________________________ *by zonal-cavity method, IES prefered practice 9 .53 .50 .48 .46 .50 .46 .49 .46 .49 .46 .46 ___________________________________________________________________________________________ 10 .52 .48 .46 .45 .48 .45 .48 .45 .47 .46 .44 ___________________________________________________________________________________________ 1/00 Patent Pending Page 142 <PREVIOUS PAGE © 2000 Rambusch Lighting, NY <<RETURN NEXT> 100/250 Watt Par 38 FLOOD/SPOT ® PAR Downlite Pendant / Bracket / Surface Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 7.5 foot min. ceiling height 150W 12.0 foot min. ceiling height 250W 150 PAR 38 FLOOD 150 PAR 38 FLOOD FLOOD angle cd 150 PAR 38 SPOT SPOT lumens cd lumens _________________________________________ 37.5 ------------_________________________________________ luminaire distribution data means vertical 32.5 166 49 ------_________________________________________ 27.5 267 68 138 35 _________________________________________ 2000 22.5 372 78 339 71 _________________________________________ 17.5 1407 232 716 118 _________________________________________ 1000 12.5 2125 252 2378 282 _________________________________________ 7.5 2993 214 6587 471 _________________________________________ 4000 2.5 3222 77 8368 200 _________________________________________ 0.0 3450 ---8400 ---_________________________________________ 2000 6000 8000 3000 10000 FLOOD light flux values SPOT _________________________________________ 0-10 17% 39% _________________________________________ 20 o 10 o 4000 0o 20 10 o o 10 o 5 o 0o 5 o 10 o 0-20 45% 62% _________________________________________ 0-30 56% 68% _________________________________________ horizontal distance from CL of Downlite (ft.) point-bypoint footcandle calculation ft. 1. All calculated footcandle values and photometric data are based on the use of a 150 watt, 1730 lumen PAR-38 lamp. 2. All footcandle values are initial; in-service values can be determined by the application of an appropriate maintenance factor (e.g., good .8; medium .75; poor .7). 3. Maximum space to mounting height above work plane: is 0.45 for spot and 0.3 for flood lamp. 0 1 2 3 4 5 6 7 8 9 10 ___________________________________________________________________________________________ 5 132 98 22 5 ___________________________________________________________________________________________ 6 92 75 24 8 2 ___________________________________________________________________________________________ 7 67 57 29 12 2 ___________________________________________________________________________________________ 8 52 46 27 10 3 1 ___________________________________________________________________________________________ 9 41 37 25 13 4 2 1 ___________________________________________________________________________________________ 10 33 31 25 12 5 3 1 1 ___________________________________________________________________________________________ 12 23 22 19 12 7 6 2 .5 .2 ___________________________________________________________________________________________ 15 15 14 13 11 7 5 3 1 .6 .3 .13 ___________________________________________________________________________________________ ceiling % 80 70 50 30 0 ___________________________________________________________________________________________ walls % 70 50 30 10 50 10 50 10 50 10 0 ___________________________________________________________________________________________ room ratio 1 .66 .65 .64 .63 .64 .62 .61 .60 .59 .59 .56 ___________________________________________________________________________________________ coefficients of utilization,* floor cavity reflectance: 20% 2 .64 .62 .60 .59 .61 .58 .59 .57 .57 .56 .54 ___________________________________________________________________________________________ 3 .62 .60 .58 .56 .59 .56 .58 .55 .56 .54 .53 ___________________________________________________________________________________________ 4 .60 .58 .55 .54 .57 .54 .56 .53 .55 .52 .51 ___________________________________________________________________________________________ 5 .59 .56 .53 .52 .55 .52 .54 .51 .53 .51 .50 ___________________________________________________________________________________________ 6 .57 .54 .52 .51 .54 .50 .53 .50 .52 .50 .49 ___________________________________________________________________________________________ 7 .56 .53 .51 .49 .52 .49 .52 .49 .51 .49 .48 ___________________________________________________________________________________________ 8 .55 .51 .49 .48 .51 .48 .51 .48 .50 .47 .47 ___________________________________________________________________________________________ 9 .53 .50 .48 .46 .50 .46 .49 .46 .49 .46 .46 ___________________________________________________________________________________________ *by zonal-cavity method, IES prefered practice 10 .52 .48 .46 .45 .48 .45 .48 .45 .47 .46 .44 ___________________________________________________________________________________________ 1/00 Patent Pending Page 144 <PREVIOUS PAGE © 2000 Rambusch Lighting, NY <<RETURN NEXT> 500 Watt Quartz Rectangular beam Hospital Examination Recessed Downlite Design Studios: 28 West 25th Street, New York, New York 10010 • Tel 212 / 675-0400 • Fax 212 / 620-4687 Workshops: 160 Cornelison Avenue, Jersey City, New Jersey 07304 • Tel 201 / 333-2525 • Fax 201 / 433-3355 ITL Report # 36583 ITL Report No.36583 luminaire distribution data mean vertical angle 45 55 65 75 85 0° 5162 2785 3240 3527 0 45° 10972 1790 540 441 0 90° 4193 796 0 0 0 2237.5 4475 6712.5 zonal lumen summary zone lumens 0-30 4394 0-40 5401 0-60 5626 0-90 5685 90-180 0 0-180 5685 % lamp 43.5 53.5 55.7 56.3 0.0 56.3 % fixture 77.3 95.0 99.0 100.0 0.0 100.0 8950 40 o 35 o 25 o 0 o 5 o 15 o total luminaire efficiency = 56.3% 500 Watt Quartz Hospital Examination Recessed Downlite. B B. 300FC C. 100FC 8’ 6” ceiling wall coefficients of utilization,* floor cavity reflectance: 20% room cavity ratio * by zonal-cavity method, IES preferred practice. A A. 400FC Provides a rectangular, concentric distribution pattern of light that delivers (A) 400 footcandles of light to a patient’s torso and extending outwards to (B) 300 footcandles and (C) 100 footcandles respectively. Diagram assumes examining table surface height to be 3’ 6” off floor, with a ceiling height of 8’ 6”. 0 1 2 3 4 5 6 7 8 9 10 Page 151 70% .67 .64 .62 .60 .58 .56 .54 .52 .50 .48 .46 80% 50% 30% .67 .67 .63 .62 .60 .58 .57 .55 .54 .52 .52 .49 .50 .47 .47 .45 .45 .43 .43 .41 .41 .39 3’ 6” 10% .67 .61 .57 .53 .50 .47 .45 .43 .41 .39 .37 70% .65 .63 .61 .59 .57 .55 .53 .51 .49 .47 .45 70% 50% 30% .65 .65 .62 .61 .59 .57 .56 .54 .54 .52 .51 .49 .49 .47 .47 .45 .45 .42 .43 .40 .41 .39 10% .65 .60 .56 .53 .50 .47 .45 .43 .41 .39 .37 50% .63 .60 .57 .55 .53 .50 .49 .46 .44 .43 .41 50% 30% .63 .59 .56 .53 .51 .48 .46 .44 .42 .40 .38 10% .63 .58 .55 .52 .49 .47 .45 .43 .41 .39 .37 50% .60 .58 .56 .54 .52 .50 .48 .46 .44 .42 .40 30% 30% .60 .57 .55 .52 .50 .48 .46 .44 .42 .40 .38 10% .60 .56 .54 .51 .49 .46 .44 .42 .40 .38 .37 50% .57 .56 .54 .52 .51 .49 .47 .45 .43 .42 .40 10% 30% .57 .55 .53 .51 .49 .47 .45 .43 .42 .40 .38 10% .57 .55 .52 .50 .48 .46 .44 .42 .40 .38 .37 0% 0% .56 .54 .52 .50 .47 .45 .44 .41 .40 .38 .36 1/00 © 2000 Rambusch Lighting, NY <PREVIOUS PAGE <<RETURN