To Our Product Catalogue

Transcription

August 2015
AIRCON FLANGE - Ph 09 636 5951, Fax 09 636 5956, 113 Mays Rd, Onehunga, Auckland
_____________CUSTOMER PROMISE
Our Purpose is to Provide a Total HVAC Buying Experience by
Providing Quality HVAC Parts & Service of the very Highest
Standard and through the Reputation Earned, Retain and
Expand upon our Loyal Customer Base.
INTRODUCTION__________________
COMPANY HISTORY
AIRCON FLANGE is a 100% New Zealand owned and operated company manufacturing and
distributing HVAC Duct Supplies, Fittings & Accessories.
We are delighted to advise that In early 2007, AIRCON FLANGE was awarded the
New Zealand/South Pacific rights as the Sole Distributor for DYNAIR, NEXUS & HARDCAST
(Carlisle Group— a Canadian Company which is one of only five in North America).
The Carlisle Group has been operating since 1987 and has a turnover in excess of 3 billion
US dollars, they design, manufacture and distribute Duct Hardware and Accessory products to the HVAC & Sheet Metal
Industries, with particular emphasis on Commercial-Industrial requirements.
DYNAIR products are of a very high quality and include Flexible Duct Connector, Damper Regulators, Air Turning Vane
assembly system, Access Door Hardware, Insulation Fasteners, etc 95% of which are produced in Canada. DYNAIR also
exports to the US, Middle East, Europe, Australia, New Zealand and the South Pacific.
DYNAIR own all their dies, moulds etc for the production of their products, some of which are manufactured by outside
contractors under agreement. DYNAIR have been dealing with the same contractors for many years.
In the later part of 2007, AIRCON FLANGE started importing additional products from other countries to compliment our
product range. We are constantly looking to broaden our product range to enhance our service and offer our valued clients
additional products as very competitive pricing.
AIRCON FLANGE is very proud of its achievements since August 2006 and remain extremely committed to providing the
Sheet Metal and HVAC Industries with excellent user friendly products and service at very competitive pricing.
For North Island Customers
For South Island Customers
Aircon Flange Ltd
Airflow Engineering (SI) Ltd
113 Mays Rd, Onehunga, AUCKLAND
500A Wairakei Rd, Burnside, CHRISTCHURCH
Ph: (09) 636 5951,
Ph: 0800 124 735,
Email:
Fax: (09) 636 5956
sales@airconflange.co.nz
Website: www.airconflange.co.nz
Email:
Fax: 0800 123 292
sales@airflo.co.nz
Website: www.airflo.co.nz
HVAC Hardware _ ___________________ AIRCON FLANGE PERFORMANCE
Ph 636 5951, Fax 636 5956, Email: sales@airconflange.co.nz, 113 Mays Rd, Onehunga, Auckland
Page 2
PICTURE INDEX OF DUCT PRODUCTS
DUCT MANUFACTURE
DUCT ACCESS
Flange, Cleats
& Corner
Angle Line/
DuraGal
Pages 4-6
Ducting/Capping
PVC Pipe & Fittings
Page 56
Access
Panels &
Doors
Pages 18
Duct Dust
Covers
Page 5,86
Wall & Roof
Brackets,
Anti-Vibration Pads
& Dampers
Page 57
Latches,
Locks,
Piano Hinge
& Handles
Pages 19-20, 95
Flexible Duct
Connector
Page 7
Damper
Regulators
& Spare Parts
Pages 8-10
HVAC SUPPORT
SYSTEMS
Rooftop Support
Pages
57,62,69,84
HVAC INSTALLATION
Vane Rail &
Vane Setter Tools
Page 11
Duct
Fasteners
Page 6, 12
Cantilever
Brackets
Page 63
Channel/Clips,
Angle Line/
DuraGal &
Accessories
Pages 38-46
58-79
Duct Suspension
& Cable Systems,
Brackets,
Clamps & Clips
Pages 21-22,
25-35
Seismic Products
Pages 26-46
Seismic Fasteners
Page 35
Duct Liner,
Duct Insulation,
Insulation
Fasteners,
Hangers &
Contact
Adhesives
Pages 13-17
Pin Spotters
& Welders
Page 14
Cable Tray &
Fittings
Pages 66-68
HVAC Tapes,
Sealants &
Strapping
Pages 22–25
HVAC
Fasteners
Pages 36-48
Cantilever
Brackets, Strut,
Angle Line/DuraGal
Pages 39-40,
58-65
DUCT
Pipe Installation
Pipe Clamps,
Saddles &
Flashings
Pages 38-41,58-64,
76-84
Passive Fire
Pages 61, 79
INSTALLATION
Flexible Duct,
Joiners,
Duct Supports
&
Air Diffusion
Pages 49-65
FASTENERS
SUNDRY ITEMS
Pages 6,12, 25-48, 70-75
Pages 85-96
Page 3
___________DUCT MANUFACTURING
_____________AIRCON FLANGE—22 Gauge Zinc Plated
 Aircon’s multipurpose NZ made Flange System can be used for both Plain or Insulated Ducting
 Unique, innovative design ensures simplicity of installing using a four bolt corner system and cleats
 Competitively Priced, Stock available all year round
 Flange is compatiable with TDC Ducting and will also join panels together
 25mm & 32mm Sizes will cover all Ducting requirements

25mm & 32mm (5m Lengths) Sizes will cover all Ducting requirements

Flange is provided with a bead of UV-resistant and waterproof sealant to ensure minimal leakage

Aircon Flange can be provided unsealed for jobs that require powder-coating
Our design ensures simplicity of installing capping for Insulated Duct suitable for 12mm, 25mm & 50mm insulation
Diagram to the left illustrates Flange with Capping added for Insulation
The diagram (left) illustrates Aircon Flange with Insulation
The diagram (right) illustrates Aircon Flange with Capping & Foam Gasket
Aircon Flange Dimensions

25mm & 32mm (5m Lengths) will cover all Ducting needs

Flange can be cut to customers specific lengths
STAINLESS STEEL FLANGE—20mm (Note: different Profile)
Please note that this product is not made on site and is a different profile

20mm available in 5m Lengths or sold by the metre

Stainless Steel Corners are sold in 500’s or separately, they are 2mm thick and are
supplied with 3 holes, 1 hole is 8.5mm diam., the other 2 holes are 6.5mm diam.
Page 4
_____DUCT MANUFACTURING
__________________________AIRCON FLANGE
25mm & 32mm Flange, Corners and Cleats
Aircon Flange Corners

2mm Mild Steel Zinc Plated

Small Aircon 1 Corners have 9mm x 14mm Slotted Hole

Small Aircon 1 Corner will accommodate 22–16 Gauge Lock-formers

Large Aircon 2 Corners have 8mm x 12mm Slotted Hole

Large Aircon 2 Corners is compatible with TDC Duct

Aircon Corners to be used with Aircon 1 (25mm Small Flange) and Aircon 2 (32mm Large Flange)

Aircon Corners are pre-punched with holes to accommodate Bolts and Sheet Metal Screws

No movement when assembled on duct, corners fit tightly into flange
Aircon Flange Cleats

1mm (#20 Gauge) Galvanized Sheet Metal can be purchased singularly

Recommended to be placed on flange 1500mm apart

One Size will fit both 25 & 32mm Aircon Flange saving costs
Diagrams illustrate Flange with Corner System
DUCT PROTECTOR—DUST COVER, Clear______________
More and more frequently, Duct Manufacturers are now asked to put a protective cover over the Duct to prevent impurities such as
dust, dirt and rain etc from getting into the newly made Duct while it is still at the manufacturers site, in transit or the project site.
Once duct has been installed, simply peel off (this product is like a heavy duty gladwrap with a sticky adhesion just on one side).
Available in 2 handy sizes, 1000mm wide for larger ducting and 500mm wide for smaller ducting.
This Duct Protection Film is made from high strength PE Film and is coated with a
unique pattern adhesive system which has excellent tack and is designed as a
temporary protection film that adheres to most surfaces without leaving adhesive
residue behind.
EXTRA TOUGH PE FILM: The film is designed to be tear and puncture resistant.
Part#
Product Description
1350 Duct Protection/Dust Cover—1000mm x 100m (100 micron)
1351 Duct Protection/Dust Cover— 500mm x 100m (100 micron)
Sold As
Pack/Ctn Qty
Each
Each
2/Ctn
4/Ctn
Page 5
______________AIRCON FLANGE, CORNERS & CLEATS
MISSION STATEMENT
To provide a high quality New Zealand manufactured Flange and Corner System for the Sheet Metal, Air-Conditioning
Heating and Ventilation Industries at competitive prices, on time to the benefit of all stake holders
Part#
Product Description
Sold As
Pkt/Ctn Qty
1004
1005
Aircon 1 Flange, Small—25mm x 5m Length
Aircon 2 Flange, Large—32mm x 5m Length
(Flange is supplied with sealant but can be supplied without sealant for Powder-Coating Applications)
Each
Each
50
50
1001
1002
Aircon 1 Corners, Small—Use with 25mm Flange
Aircon 2 Corners, Large—Use with 32mm Flange
Each
Each
500
250
1003
Aircon Cleats/Duct Clips—150mm (fits on both large & small flange)
Each
200
1458
1459
Flange—Stainless Steel, 20mm x 5m Length
- Stainless Steel Corners—20mm
***NB; this product is a different profile from Aircon Flange Flange & Corners
Each
Each
500
1082
Flange Clamp—3mm (M8 > 25mm Bolt)
Each
100
1035
1036
1258
Gasket/Duct Foam Tape—Black 5mm x 12mm x 15m
Gasket/Duct Foam Tape—Black 5mm x 15mm x 15m
Gasket/Duct Foam Tape—Black 3.2mm x 20mm x 30.5m
Each
Each
Each
25
20
20
1047
1011
1012
M8 x 16 Flanged Bolt & Nut, Hex Head, Serrated-No Washer—Zinc Plated
M8 x 25 Set Screw & Nut, Hex Head—Zinc Plated ***For Small Flange***
M10 x 30 Set Screw & Nut, Hex Head—Zinc Plated ***For Large Flange*
Pkt/100
Pkt/200
Each
1000
10 Pkt/Ctn
200
Tech Screws, Hex Head, Metal Self Drilling—#8 x 1/2‖ Zinc Plated
Tech Screws, Pan Head, Metal Self Drilling—#8 x 1/2‖ Zinc Plated
Box/1000
Box/1000
Box/1000
Box/1000
Box/1000
Pail/10000
Pail/10000
Pail/10000
Pail/6000
Pail/10000
Rivets—73SS 4-2
Rivets—73SS 4-3
Rivets—73SS 4-4
Box/1000
Box/1000
Box/1000
10 Box/Ctn
10 Box/Ctn
10 Box/Ctn
Insulation Fasteners—Stik-On Pins, 1 1/4‖ 32mm (Self Adhesive Pins)
Insulation Fasteners—Stik-On Pins, 2 1/2‖ 63mm (Self Adhesive Pins)
Insulation Fasteners—Spot On Pins, 1 1/4‖ 32mm
Insulation Fasteners—Spot On Pins, 2 1/2‖ 63mm
Insulation Fasteners—Spot On Clips/Washers, Round
Insulation Fasteners—#12 CD Pins, 1 1/4‖ 32mm
Insulation Fasteners—CD Clips/Washers, Rectangular
Pkt/100
Pkt/100
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
309600
308193
308195
308197
308209
1048
1045
1044
308162
308165
308105
308109
308325
0112-125
0112-250
0112-450
2231-0125
1514
1517
1515
Duct Liner—Novahush Polyester Black Face 2400x1200mm (25mm Insulation)
Each
Each
Each
12/Pkt
12/Pkt
6/Pkt
1049
1078
Duct Sealant—Metalseal, Bostik FR Duct Sealer, Grey, GREY 375ml
Duct Sealant—Metalseal, Galva-Mate Duct Sealant, Grey, 310ml ***Water-Based
Can be Over-Painted when Cured
Each
Each
20/Ctn
25/Ctn
1334
1331
1332
1343
Duragal Angle—Pregalv, 40mm x 40mm x 2.5mm (6M Length)
Duragal Angle—Pregalv, 40mm x 40mm x 4mm (6M Length)
Duragal Angle—Pregalv, 30mm x 30mm x 2.5mm (6M Length)
Duragal Angle—Pregalv, 30mm x 30mm x 2.5mm (3M Length) ***Slotted***
Each
Each
Each
Each
10
10
10
10
1350
1351
Duct Protection/Dust Cover—1000mm x 100m (100 micron)
Duct Protection/Dust Cover— 500mm x 100m (100 micron)
Each
Each
2/Ctn
4/Ctn

Aircon Flange is provided with a bead of UV-resistant and waterproof sealant to ensure minimal leakage

Aircon Flange can be provided unsealed for jobs that require powder-coating.

Flange can be cut to the customers specific length requirements.
Please Note: More Information on
Tech Screws & Rivets are on Page 12
Insulation Pins are on Pages 13-14
Photo shows the Aircon Flange & Corner
System on Ducting with Aircon Cleats/Clips
and External All-Weather Capping
Page 6
Double Fold
Offset Seam
_DUCT MANUFACTURING
FLEXIBLE DUCT CONNECTOR
______________________________ECONO VINYLFLEXTM
VINYLFLEX is a polyvinyl chloride coated polyester woven fabric with tremendous tear resistance.

Low Cost & Leak Proof

Wide Temperature Range (-35 to 200˚ F/ -37 to 95˚ C)

Good Abrasion, Moisture and Mildew Resistance

Used in Heating and Cooling Applications

Great Strength and Tear Resistance
RECOMMENDED USES:
VINYLFLEX can be used on both supply and return air ducts in most HVAC applications where an economical flexible
connection is required and can be used in damp locations, resisting bacterial attack.
VINYLFLEX is a replacement for canvas, which is no longer considered acceptable.
NEOPRENETM
_______________________________________________________
NEOPRENE is the choice of specifying engineers. It is the industry standard, retaining its flexibility and aging characteristics
over a long period of time.
NEOPRENE offers high resistance to a broad range of chemicals, acids and alkalis.

The Industry Standard for Indoor & Outdoor Use, High Velocity & High Pressure Systems

Airtight, Waterproof, Resistant to Mildew, Many Acids, Oils, Alkaline, Toxic Fumes
RECOMMENDED USES:
NEOPRENE can be used with confidence on all high velocity and high pressure HVAC systems or when exposed to toxic
fumes. It should not be used above 235˚ F (113˚ C)
______________________________________HYPALONTM
HYPALON is the preferred material for Outdoor Applications such as connections to Rooftops units where they may be in
direct sunlight. It is unaffected by Ozone and can be used near Electrostatic Air Cleaners with complete confidence. It is more
Abrasion-Resistant than NEOPRENE, has a slightly wider operating temperature and excellent aging qualities.
HYPALON resists a wide range of chemicals.

Waterproof & Airtight

Off-White in Colour

High Resistant to Ozone & Sunlight

Resists Abrasion Better than NEOPRENE

Wide Temperature Range (-50 to 206˚ F/ -46 to 126˚ C)

Superior Aging Characteristics

Better Weathering Capabilities (including resistance to ultraviolet & ozone)

Self Extinguishing Fire-Ratings
RECOMMENDED USES:
Flexible connections in OUTDOOR APPLICATIONS subject to direct sunlight, such as rooftops units
Part#
Product Description
Sold As
309144
Flexible Duct Connector—Vinyl Econoflex Flat, Black, 30.5m 2‖-4‖-2‖
(Indoor Applications)
Each
Can also be
sold per Metre
309737
Flexible Duct Connector—Neoprene, Flat, Black, 30.5m
(Indoor and Outdoor Applications)
Each
Can also be
sold per Metre
307886
Flexible Duct Connector—Hypalon, Flat, White, 30.5m
2‖-3‖2‖
***PREMIUM GRADE*** (Outdoor Applications) **Ideal for Direct Sunlight
Each
Can also be
sold per Metre
2‖-4‖-2‖
Page 7
QUADRANT/DAMPER REGULATORS — Up to 250 x 250mm
KWIKI residential regulators are designed to allow easy installation onto any factory-made residential quality damper blade.
The spring in the spring-loaded bearing will never bind or interfere with the blade. Both KB-1 (Spring Loaded Bearing) &
KM-1T (Threaded End Bearing) will perforate the metal with ease every time.
The special handle can also be used on both ends simply by flipping it from one end to the other.
Both ends include steel back-up washers and gaskets to resist leakage. (Kwiki Gasket Economy Bearing Included).
Part#
Product Description
Sold As
307961 Kwiki Set - Zinc Plated
(1 Box contains 10 Sets of 10 = 100 Quadrants)
Pkt/10
10 Pkts/Ctn
Set Includes: 2x Kwiki Retracting Bearing, Handle, Wingnut, Washer Steel & Gasket Economy Bearing
307962 Kwiki Set Economy - Zinc Plated
(1 Box contains 10 Sets of 10 = 100 Quadrants)
Pkt/10
10 Pkts/Ctn
Set Includes: Kwiki Retracting Bearing, Handle, Wingnut, Washer Steel, Gasket Economy Bearing & Economy Bearing
Part#
Product Description
Sold As
307964
Kwiki Retracting Bearing—Zinc Plated
Each
307966
Kwiki Economy Bearing–Zinc Plated
Each
307968
Kwiki Handle—Zinc Plated
Each
307970
Kwiki Wingnut—Zinc Plated
Each
307974
Kwiki Washer, Steel—Zinc Plated
Each
307976
Kwiki Gasket Economy Bearing
Each
307978
Kwiki Gasket Retracting Bearing
Each
MINI DIAL regulators have unique features and are
robust enough to handle both residential and light
commercial applications.
(Mini Dial has a forged high quality wing nut).
Part#
Product Description
Sold As
307981
Mini Dial Set - Zinc Plated
Each
Set Includes: MINI DIAL Regulator 1/4” & Spring Slide Bearing 1/4”
DIAL-A-MATIC sets the Highest Standard in 1/4‖ Regulators for Round or Square Duct
Part#
308003
305473
Product Description
Sold As
Ctn Qty
Dial-A-Matic Set 1/4‖ - Zinc Plated
Pkt/10
100 Sets
Dial-A-Matic Set 1/4‖ - STAINLESS STEEL
Each
Dial-A-Matic Set, Long 1/4‖ - Zinc Plated
(FOR INSULATED DUCT APPLICATIONS)
Each

Quick & Easy to Install

Shows Blade Direction

Includes Locking Wingnut & Screw

Off-set Mounting Holes Allow for
Full Open Position

Formed 16 Gauge Steel Handle
Clearly Shows Damper Position

Heavy Gauge Dial and Handle,
Reduces Rattle & Locks
Securely
100 Sets
Set Includes: DIAL-A-MATIC Dial 1/4”, Square End Bearing Long 1/4” & Spring Slide Bearing Long 1/4”
The NQK4 & ZQK5 are both a popular
economical alternative Damper Quadrant,
will take 0.75 Sheetmetal.
Commercial & Residential with
Reinforced Handle
25 Sets
Set Includes: DIAL-A-MATIC Dial 1/4”, Square End Bearing 1/4” & Spring Slide Bearing 1/4”
308004

Part#
Product Description
Sold As
Ctn Qty
1055
NQK4 Plastic Quadrant
(3 Piece)
Each
200 Sets
1055D ZQK5 Diecast Quadrant
(3 Piece)
Each
200 Sets
1269
Starlock Washer 8mm
Pkt/1000
Page 8
LARGE QUADRANT/DAMPER REGULATORS
3/8‖ Single & Double Shear Quadrant Sets —Up to 500 x 500mm
1/2‖ Single & Double Shear Quadrant Sets— Up to 750 x 750mm
Dial Regulator: 18 Gauge Steel with a 13 Gauge Handle

Clamping Action with Single Shear Feature for Rattle Free Operation

Use on Round or Rectangular Duct Application

Washer/Lock-washer Combination Locks Handle Firmly Against Dial
Single Shear Quadrants: When the Wing Nut is tightened, handle travels down towards the bottom of the Quadrant frame,
jams the square rod in Single Shear, this eliminates rattle. When taking a Single Shear regulator with the square rod in place,
you will notice when tightening the Wing Nut, the rod swings upward. When the rod is held in place by the damper (inside the
ductwork), the regulator on the outside of the ductwork pulls the rod downward and this, places the rod in Single Shear.

Heavier Gauge Off-set Handle Holds the Square Bearing Pin Firm with No Chance for ―Round-out‖ Wear

Off-set Mounting Holes Allow Full Operation of All Fastening Methods

Off-set Handle Firmly Clamps Square End Bearing in ―Single Shear‖, Securing It Against Quadrant Frame
Double Shear Quadrant: When tightening the Wing Nut, the heavy 12 gauge handle travels down towards the bottom of the
quadrant frame, this action places the square rod in Double Shear by jamming it against the Quadrant frame which eliminates
rattles and has a greater holding power making them popular with engineers.
Differences between Double Shear & Single Shear Quadrants is that with the Double Shear Quadrants, there’s no need to rely
on the damper as the Reverse Bend Handle takes care of holding the rod in two places therefore placing it in Double Shear.

Greater Holding Power than the Single Shear Regulator Sets

Reverse U-Bend Firmly Clamps Square Bearing Pin Front & Back, Secure against Quadrant Frame
CLAMPMATIC Quadrant: Slotted 12 Gauge Steel Handle with Offset

Bolt/Nut Squeezes Bearing Pin Firmly
Reverse
U-Bend
Detail

Backup Neoprene Gasket Included

The Squeezing Clamping Action of the Reverse Bend Handle, Fitted with Bolt & Nut, Assures Non-Slippage
Part#
305522
305474
Product Description
Sold As
Ctn Qty
Each
Each
100 Sets
25 Sets
Each
50 Sets
Dyn-A-Quad Set, Large Clampmatic Round Hole 3/8‖ Zinc Plated
Each
50 Sets
Dyn-A-Quad Set, Large Single Shear 1/2‖ - Zinc Plated
Each
50 Sets
Dial-A-Matic Set, Large 3/8‖ - Zinc Plated
Dial-A-Matic Set, Large 3/8‖ - STAINLESS STEEL
Includes: DIAL-A-MATIC Dial 3/8”, Square End Bearing 3/8” & Spring Slide Bearing 3/8”
308030
308042
308024
Dyn-A-Quad Set, Large Double Shear 3/8‖ - Zinc Plated
Includes: Dynaquad Double Shear 1/2”, Square End Bearing & Round End Bearing
Includes: Dynaquad Single Shear 1/2”, Square End Bearing & Round End Bearing
Page 9
QUADRANT/DAMPER ACCESSORIES
__________________END BEARINGS—ROUND & SQUARE
Product Description
Sold As
Round End Bearing, 3/8‖
***For Dyn-A-Quads***
Each
Square End Bearing, 1/2‖
Each
Round End Bearing, 1/2‖
Each
___________________________RUBBER GROMMETS
Rubber Grommets are easy to install and used to Prevent Air Leakage & Rattle around the Spring/Pivot Bearing
Part
Product Description
Pan
Hole
Drill Hole
Cut Sizes
Can be Used
With Product
1015
Rubber Grommet –Small
(Inside Diameter—4.5mm)
8mm
8mm
1016
Rubber Grommet—Large
(inside Diameter—8.0mm)
10mm
10mm
#
Sold As
Pkt Qty
Dial-A-Matic 1/4‖
Each
100/Pkt
Dial-A-Matic 3/8‖
Each
100 Pkt
INSTRUMENT TEST PORT - For Duct Performance Monitoring___
The PTP-1 is an inexpensive Instrument Test Port, consisting of a ZAMAC (zinc) alloy body casting, which is installed over a
sponge neoprene gasket. This housing is internally threaded to accept a precision molded high density polyethylene plug,
fitted with a neoprene ―O‖ ring, rendering it leak proof.
The plug is red in colour making it easy to locate when conducting pressure/velocity tests. It withstands continuous intermittent
operating temperatures of 165˚ F (72˚ C) and 215˚ F (100˚ C).
Port cap has exceptional dimensional stability and is impervious to most chemicals and freezing
temperatures down to -94˚ F (-70˚ C). The housing 3/4" port opening.

Economical, Leak Proof Cap

3/4‖ Opening Accepts Pitot or Velometer
Part#
308081
Product Description
Test Port Fitting— Includes Sponge Neoprene Gasket & “O” Ring to Eliminate Leakage
Sold As
Each
Page 10
VANE RAIL/VANE SETTER
_______________________________DYN-O-RAILTM
And Patented Vane Setter

Sturdy 24 Gauge Steel Embossed-For-Stiffness Design

Use with Single or Hollow Vanes—Up to 16 Gauge Sheet

Relief Holes in Slots, Support Vanes During Assembly

Bevel Edges Remain Straight for Better Contact

Use Patented VANE SETTER Tool to Secure Vane to Rail

Use Casting Pins for fixing Vane Rail
Part#
Product Description
Sold As
308088
Dyn-O-Rail CML 4‖ X 30.5m Roll (Commercial)
Each
308089
Dyn-O-Rail JR RSDL 2 1/4‖ X 30.5m Roll (Residential)
Ctn/2
1079
Casting Pins
Each
304639
Vane Setter
Each
308087
Impact Vane Setter—Air Operated
Each
VANE SETTER—For Fabricating Turning Vane Assemblies__
The Dyn-O-Rail used in conjunction with the Vane-Setter Tool will save VALUABLE TIME in assembling Turning Vane
Systems. It’s so RELIABLE and SIMPLE that one can hardly believe it actually works.
More and more Sheetmetal shops are converting to this system as price competitiveness escalates.
Made especially for use with Dyn-O-Rail, the Vane Setter will save considerable assembly time and money. It produces
perfect, dependable turning vane assemblies. The tool is made to exactly fit the rail depressions, is self-centering and, when
activated, splits, bends over and sets the vane in place so that it cannot work loose.
When placed into the vane depression, the Vane Setter holds the rail firmly against the vane edge. One sharp hammer blow
does it all! It works every time and it works equally well on double or hollow vanes!

Combination of Vane ―Dimple‖ configuration & Vane Setter yield the most reliable Vane-to-Rail Assembly in the Industry

Punched Holes at Both Ends of Slot ―Claws‖ to Hold Vane End Secure & Allow Vane Thicknesss up to #16 Gauge
AIR OPERATED IMPACT VANE SETTER—For Use With Dyn-O-Rail
The AVST-2 AIR OPERATED IMPACT VANE SETTER is an inexpensive tool, which uses the patented VST-1 Vane setter
system, but goes one step further. This medium duty air tool simplifies and speeds up fabrication of air turning vane
assemblies. It can be used to set both single and hollow vanes.
The AVST-2 is designed to be used with DYN-O-RAIL and may not perform satisfactorily with other rails. The nose of the tool
fits exactly into the button depressions of DYN-O-RAIL for which it was made.

One Hand Operation which is Quick and Convenient

Sets Vanes from 26–16 Gauge & Operates at 40 psi Shop Air Pressure

Self Centers in Vane Buttons Produces a Positive Vane Lock
Vane
Setter Tip
Page 11
FASTENERS
_________TECH SCREWS for SHEETMETAL, Self Drilling
Tech Screws ( known as Self-Drilling Fasteners) drill and tap into heavy gauge applications quickly & securely.
The forged drill point combined with special threads eliminates the need for centre punching or pre-drilling holes.
Part#
Product Description
Sold As
Pkt/Ctn Qty
309600
308193
308195
308197
Tech Screws — Hex Head #8 x 1/2‖ Zinc Plated
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pail/10000
Pail/10000
Pail/10000
Pail/6000
308209
1370
Tech Screws — Pan Socket #8 x 1/2‖ Zinc Plated
Square Drill Bit—No.2, 50mm
Pkt/1000
Each
Pail/10000
308199
308201
307540
Chuck Driver, Magnetic — Hex Head 1/4‖ (for #8 Tech)
Chuck Driver, Magnetic — Hex Head 5/16‖(for#10 Tech)
Chuck Driver, Magnetic — Hex Head 3/8‖
Each
Each
Each
12/Pkt
12/Pkt
12/Pkt
NB: MORE TECH SCREWS FOR HVAC INSTALLATION ARE FEATURED ON PAGE 47
POP RIVETS ______________________________
Part#
Product Description
1048
1045
1044
1230
1104
1158
1234
1159
Rivets—73SS 4-2
Rivets—73SS 4-3
Rivets—73SS 4-4
Rivets—73SS 4-6
Rivets—73SS 4-8
Rivets—73SS 6-4
Rivets—73SS 6-6
Rivets—73SS 6-8
1048A
1044A
1230A
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Rivets—AS 4-2 Aluminium
Sold As
Pkt/Ctn Qty
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/500
Pkt/500
Pkt/1000
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
Pkt/1000
Pkt/1000
Pkt/1000
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
NB: OTHER TYPES & SIZES OF RIVETS
ALSO AVAILABLE, POA
POP RIVET GUNS ARE ON PAGE 48
Use #1092 1/8” Double Ended Drill
Bit for 73SS4 Series Rivets
Use #1088 3/16” Double Ended Drill
Bit for 73SS6 Series Rivets
__________DRILL BITS—Masonry, Double Ended & Jobber
Part#
Product Description
Sold As
Pkt Qty
1356
1357
1539
1344
1345
1346
1358
1359
1347
1360
1361
1348
1461
Jobber Drill, HSS—3.0mm
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
10
10
10
10
10
10
10
10
10
10
10
10
10
1092
1088
1565
Double Ended Drill Bit—1/8‖ #30 (3.2mm) **For 4 Series
Double Ended Drill Bit—3/16‖#11 (4.9mm) **For 6 Series
Double Ended Drill Bit—
#20 (4.09mm **For 5 Series
Pkt/10
Pkt/10
Pkt/10
100
100
1362
1562
1363
1364
1563
1365
1366
SDS Multi-Fit Hammer Drill—5.0 x 110mm
Each
Each
Each
Each
Each
Each
Each
10
10
10
10
10
10
10
We stock the most
popular sizes of Drill
Bits for HVAC but if
you need another
size, please ask,
POA
HVAC
1370 Driver
Hardware
Bit, Square_#No.2
___________________
–75mm
AIRCON
Each FLANGE
10
PERFORMANCE
1370L
Driver
Bit,636
Square
#No.2
–75mm
10
Ph
636 5951
, Fax
5956,
Email:
sales@airconflange.co.nz, 113 Mays Rd, Onehunga,
Auckland
Page 12
INSULATION FASTENERS
STIK-ONS (Also known as Self Adhesive Pins) are 14 gauge steel insulation pins which are permanently
staked through 2x2‖ galvanized/steel base plates. A pressure-sensitive adhesive backing provides a
permanent bond between the Pins & ductwork
STIK-ONS can be used to hold low and medium density insulation where the temperature will not exceed 180˚ F (82˚ C).
Product Technical Data
Temperature Range:
-30˚ F (-35˚ C) - 180˚ F (82˚ C)
Application Temperature:
above 40˚ F (4˚ C)
Holding Power:
3 lbs. per unit
Part#
Product Description
Pictures left and right
illustrate Nylon Protective
Caps by themselves and
in use with pins
Metric Size
Sold As
308162
308164
308165
Stik-On with Clips 1 1/4‖
Stik-On with Clips 2‖
(32mm)
(50mm)
(63mm)
***Also known as Self Adhesive Pins***
Pkt/100
Pkt/100
Pkt/100
308167
308169
308170
Stik-On with Clips 2‖
(32mm)
(50mm)
(63mm)
Ctn/1000
Ctn/1000
Ctn/1000
1070
Nylon Protection Caps
Pkt/1000
WELD-ONS (also known as Rib Pins) are manufactured with consistently sharp points to ensure positive contact
with sheet metal to which they are to be welded.
Produced from a special carbon alloy steel, the point of the welding pin is hardened in a unique cold form process.
This hardens the points giving them a steel temper, which unlike other welding pins, will not blunt or flatten when applied.
The sharper point of contact results in a better weld and creates fewer sparks to ignite adhesives or burn substrates.
WELD-ONS are easily applied using any conventional portable or automatic resistance welding unit.
Cup style washer is designed to sufficiently depress the insulation surface without tearing it.
Part#
308111
308113
308114
308115
304972
Product Description
Metric Size
Weld-Ons Cup Head 1/2‖
Weld-Ons Cup Head 1‖
Weld-Ons Cup Head 1 1/8‖
Weld-Ons Cup Head 1 1/4‖
Weld-Ons Flat Head 2‖
(12mm) ***Also known as Rib Pins**
(25mm)
***Also known as Rib Pins**
(28.6mm) ***Also known as Rib Pins**
Grip Length
Sold As
.500‖
.940‖
1.125‖
1.25‖
2.00‖
Pail/1000
Pail/5000
Pail/3000
Pail/3000
Pail/3000
SPOT-ONS and companion clips, sold separately, are a convenient and proven method for
fastening insulation blanket or board to sheet metal.
The SPOT-ON Serrated (Ring Shanked) pins are made of 14 gauge low carbon steel,
annealed and zinc-plated.
Part#
Apply using any Portable
or Automatic Welding
Unit with Hollow
Magnetic Tip
308105
308107
308109
308325
1070
Product Description
Insulation Size
Sold As
Pkt/Ctn Qty
Spot-On Pins, 1 1/4‖ (32mm)
25mm
Spot-On Pins, 2‖
(50mm)
50mm
Spot-On Pins, 2 1/2‖ (63mm)
50mm
Spot–On Clips/Washers (14 Gauge for All Serrated Pins)
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
Nylon Protective Caps
Pkt/1000
Page 13
INSULATION FASTENERS, PIN WELDERS & DUCT LINER
Capacitor Discharge (CD) Pins and clips, sold separately, are a convenient and proven method for fastening insulation blanket
or board to sheet metal. CD Pins can accommodate Insulation 1/2‖-4‖ thick. The CD Pins are smooth and made of 12 gauge
low carbon steel, annealed and are Zinc Plated
Part#
0112-0110
0112-0125
0112-0200
0112-0250
0112-0300
0112-0400
0112-0450
2231-0125
1070
Product Description
Sold As
CD Pins, 1‖
(25mm)
CD Pins, 1 1/4‖ (32mm)
CD Pins, 2‖
(50mm)
CD Pins, 2 1/2‖ (63mm)
CD Pins, 3‖
(75mm)
CD Pins, 4‖
(100mm)
CD Pins, 4 1/2‖ (113mm)
CD Clips/Washers (Square)
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Nylon Protective Caps
Pkt/1000
All CD Pins are compatible and recommended for use
with all brands of Capacitor Discharge (CD) stud
welding equipment.
Apply using any stationary
resistance welding unit
with hollow magnetic tip.
Pin Welders For Fastening Spot-Ons to Sheet Metal Only
A reliable, easy to maintain, medium to heavy-duty pin welder.

Weld SPOT-ON Pins to Galvanized and Cold Rolled Light Gauge Sheet Metal

Well Balanced & Use of One Hand Operation

Can Be Hung from a Retractable Overhead Cable Reel

Fitted with Dual Switches Actuated by a Single Trigger Switch and has a Weld Timer to Assure Good Welds

Application Rate Up to 8 per Minute on 19-22 Gauge and Up to 12 Per Minute on 24 Gauge and Lighter

Fuse 20 Amps/ 220 Volt Machine which includes Carry Case to Protect Unit
Pin Welders For Fastening Weld-Ons (Rib Pins) & Spot-Ons to Sheet Metal.

Solid State Timer and Weld Relay

Heavy Duty Transformer Unit with Rugged 16 Gauge Case

Weld On Lamp

Super Lightweight Gun 730grams
Part#
Product Description
Sold As
308179
304643
Spot-On Pin Welder—220 Volt & Case
Spot-On Pin Welder Magnetic Tip
Each
Each
304644
304645
Weld-On Pin Welder—Solid State Resistance ***Also Does Spot-On Pins ***
Weld-On Pin Welder Magnetic Tip
***Also Does Spot-On Pins ***
Each
Each
__DUCT LINER, Novahush—Polyester
Novahush Duct Liner is made from 100% Flame Resistant Polyester. It meets all the Building Codes and is
installed within the Ducting to Reduce Heat Loss & Noise being transferred along the Duct System.
The Black Facing is a universal Duct Liner to the HVAC industry, for use in all types of Air Conditioning Systems ie. Rectangular
Ducting, Silencers, Oval and Round Sheetmetal Ducting.


Part#
1514
1517
1515
1560
1560S
User Friendly (no Fibre Health issues)
Meets all Building Codes


Complies with NZBC C3 (achieved Group 1S)
No special Equipment needed to Install
Product Description
Duct Liner, Novahush 2400x1200mm Sheet Polyester (25mm Insulation)
Bahco Insulation ProfCut Handsaw– 550mm (Resharpable)
Bahco Insulation ProfCut Handsaw Sharpener
Sold As
Each
Each
Each
Each
Each
Pkt/Ctn Qty
12/Pkt
12/Pkt
6/Pkt
-
Page 14
_DUCT MANUFACTURING
DUCT LINER & DUCT INSULATION
___DUCT LINER, Novahush—Polyester




Novahush Duct Liner is made from 100% Flame Resistant Polyester.
It meets all the Building Codes and is installed within the Ducting to
Reduce Heat Loss & Noise being transferred along the Duct System.
The Black Facing is a universal Duct Liner to the HVAC industry, for
use in all types of Air Conditioning Systems ie. Rectangular Ducting,
Silencers, Oval and Round Sheetmetal Ducting.
Bahco Insulation Handsaw (Swedish Made) is Specially developed for Cutting Insulation Material like Fibreglass, Polyester,
Wool, EPS (Expanded Polystyrene, cellular plastic up to 75mm) & XPS (Extruded Polystyrene like Styrofoam up to 75mm).
It has a Resharpable Blade that has a Wave Formed Sharpened
Edge (WT Toothing) that allows it to slice through material creating
Minimal Waste
Part#
Product Description
1514
1517
1515
1560
1560S
308239
308239B
Sold As
Pkt/Ctn Qty
Each
Each
Each
Each
Each
12
12
6
-
Cutter—Sterling 25mm Screwlock Heavy Duty
Cutter Blades—25mm (Pkt/10)
DUCT LINER, Thermobreak AcoustiPlus—Hospital Grade**
Thermobreak AcoustiPlus is
a new generation Duct Liner
which is an Open Cell
physically Crosslinked
Polyolefin Foam specially
designed for Hospital use.
It has Excellent Acoustic Absorption at Low Thickness
which is Extremely Lightweight, Durable & Erosion Resistant
Part#


Anti-Microbial to ASTM G21
Low VOC for Improved Indoor Air Quality




Fibre Free, PVC free (contains no Biocides)
Excellent Ozone & UV Resistance
Operating Temperature; -80˚C to +100˚C (no Adhesive)
BS476 Parts 6 & 7, Class 0 Fire Rated

AS1530 Part 3 Ignitability, Spread of Flame, Heat
Evolved Index = 0
Product Description
Duct Liner—Thermobreak AcoustiPlus—15mm x 1200mm x 20m (24m2)
Duct Liner—Thermobreak AcoustiPlus—15mm x 1200mm x 20m with Adhesive
TBA
POA
Sold As
Each
Each
Each
Each
CONTACT ADHESIVES—Brush & Spray Applications
Ideal and very Popular for HVAC Applications such as Gluing Insulation to Metal Ducting
Bostik Supertak NF (Non-Flammable) Sprayable Contact Adhesive is a New Generation of Synthetic Rubber/
Resin Adhesives where its High Solids/Low Solvent Formula produces a Quicker, Stronger, More Aggressive
Bonding System which Out-Performs most Conventional Adhesives.
Bostik NF Supertak is Totally Non Flammable when Fully Cured, is Tested to over 110˚C & won’t
delaminate in High Temperature Situations Dependant on Bond Line Stress
Part#
304159
304159C
1549
1549C
1599
1599R
HVAC
1550
Product Description
Bostik 1222 Contact Adhesive—500ml Brush On
Bostik 1222 Contact Adhesive—4L Can Brush On
Sabre Grip S20 Contact Adhesive—500ml Aerosol Spray On (6m Coverage)
Sabre Grip S20 Contact Adhesive—17kg Canister **Spray On (200m Coverage)
Bostik NF Supertak Contact Adhesive—17kg Canister **Clear** Spray On
Bostik NF Supertak Contact Adhesive—17kg Canister **Red**
Spray On
Hardware
_ ___________________
AIRCON FLANGE
Spray Gun & Hose
Set
Sold As
Pkt/Ctn Qty
Each
Each
10
2
Each
12
Each
Each
Each
PERFORMANCE
EAch
Page 15
______DUCT MANUFACTURING
DUCT LINER AND DUCT INSULATION
DUCT INSULATION—Thermobreak Foil Insulation
Thermobreak is a High-performance, closed cell cross-linked Polyolefin Foam which outperforms rubber,
fiberglass and all non-cross-linked products. As well as being extremely long-lasting, Thermobreak is quick,
safe to install, has a low environmental impact.
It is designed for a range of industrial applications but in the HVAC market, it is used as an Interior or
Exterior wrap on Rectangular, Square or Oval Ducting & is an alternative to Fiberglass & Polyester Ducting.
It’s Labour Saving with a Peel and Stick application option where fibre products have to be mechanically
fixed, edges sealed and taped.
Part#
1558
1558A
1559
1559A
Product Description
Sold As
Thermobreak Foil Face, 5mm—1200mm Wide x 50m Length Roll (60m2 roll)
Thermobreak Foil + Adhesive, 5mm—1200mm Wide x 50m Length Roll (60m2 roll)
Each
Each
Each
Each
Can be sold
by Square
Metre
Also
HVAC ALUMINIUM FOIL TAPES____________________
Part#
Product Description
Sold As
Ctn Qty
1033
1212
HVAC Aluminium Foil Tape—48mm x 45m
Each
Each
24
16
1034
1213
Reinforced Fire Rated HVAC Aluminium Foil Tape—48mm x 50m
Each
Each
24
16
CONTACT ADHESIVES—Brush & Spray
Popular for HVAC Applications such as Gluing Insulation to Metal Ducting
Bostik 1222 Contact Adhesive is a general purpose adhesive formulated to give a High Bond Strength & High Heat
Resistance (Temp. Range: –20˚C to 150˚C). It’s an excellent choice for the Adhesion of Roofing Butyl & for HVAC Uses

Totally Non Flammable when Fully Cured

Forms a Water Resistance Bond when Fully Cured (Ideal for Bathroom, Kitchen & Marine Applications)

Tested to over 110˚C & won’t delaminate in High Temperature Situations Dependant on Bond Line Stress
Sabre Grip S20 (was Tensorgrip F20) has been developed to provide very Fast Tack Times. Its High Solids & Pressure
Sensitive Adhesive Technology makes this product popular with all types of Production Processes.
Part#
304159
304159C
1549
1549C
1599
1599R
1550
HVAC

Fast Drying

Good Green Strength

Long Open Time

Good Heat Resistance

Good & Fast Tack

Portable & Convenient
Product Description
Bostik 1222 Contact Adhesive—500ml Brush On
Bostik 1222 Contact Adhesive—4L Can Brush On
Sabre Grip S20 Contact Adhesive—17kg Canister **Spray On (200m Coverage)
Bostik NF Supertak Contact Adhesive—17kg Canister **Clear** Spray On
Bostik NF Supertak Contact Adhesive—17kg Canister **Red**
Spray On
Spray Gun & Hose
Set
Hardware
_ ___________________
AIRCON FLANGE
Sold As
Ctn Qty
Each
Each
10
2
Each
12
Each
Each
Each
EAch
PERFORMANCE
Page 16
__________DUCT MANUFACTURING
DUCT INSULATION
___QuietStuf DUCT WRAP (NZ Made)
Duct Wrap or Insulation Blanket (25mm & 50mm) is a lightweight, flexible, Acoustic/Thermal Insulation
manufactured from Thermally Bonded Polyester with a Fire Resistant Foil Laminate Facing on one
side.
Duct Wrap is used for external lining of Air-conditioning Ductwork and provides Noise Absorption and
Thermal Insulation for the ducting. It also acts as a Moisture Blanket preventing condensation on cold
Air Systems that could otherwise lead to Corrosion and Staining of Ceilings if not Insulated.
Part#
1339
1339T
Product Description
Sold As
Duct Wrap—1200mm Wide x 10m Length Roll (25mm)
Each
Each
HVAC ALUMINIUM FOIL TAPES___________________
Part#
Product Description
Sold As
Ctn Qty
1033
1212
Each
Each
24
16
1034
1213
Each
Each
24
16
_____THERMOBREAK FOIL INSULATION
Thermobreak is a High-performance, closed cell cross-linked Polyolefin Foam which
Outperforms Rubber, Fiberglass and all Non-cross-linked products. As well as being
extremely long-lasting, Thermobreak is quick, safe to install, has a low environmental
impact.
It is designed for a range of industrial applications but in the HVAC market, it is used as
an Interior or Exterior wrap on Rectangular, Square or Oval Ducting and is an
alternative to Fiberglass & Polyester Ducting.
It’s Labour Saving with a Peel and Stick application option
where fibre products have to be mechanically fixed, edges
sealed and taped.
Part#
1558
1558A
1559
1559A

Quick, Safe & Easy to Install

Low Environmental Impact

Labour Savings

Out-Performs Rubber, Fibreglass and all non-cross-linked products
Product Description
Sold As
Each
Each
Each
Each
Can be sold
by Square
Metre
Also
***All Data Specifications & Material Data Safety Sheets are Available on request***
Page 17
__________DUCT MANUFACTURING
ACCESS DOORS & PANELS
___________________________CIRCULAR DUCT
Curved Aluminium Access Door for Round Duct are designed for trouble-free access to Volume and Fire Control Dampers and
associated Ventilation and Air-conditioning equipment mounted within Ductwork.
Every Access Door comes with a self-adhesive Template which aides in Accurate & Easy Installation on the Spiral Duct.
Part#
Product Description
Door Size
Diameter
Sold As
Ctn Qty
1338
1133
1134
1135
1136
Curved Access Door for Round Duct
250x150mm
250x150mm
250x150mm
250x150mm
250x150mm
150mm
200mm
250mm
315mm
400mm
Each
Each
Each
Each
Each
5
5
5
5
5
1217
1218
1219
1220
1221
1222
400x300mm
400x300mm
400x300mm
400x300mm
400x300mm
400x300mm
400mm
450mm
500mm
560mm
630mm
710mm
Each
Each
Each
Each
Each
Each
5
5
5
5
5
5
FLAT DUCT ACCESS DOORS—Square or Rectangular Duct
Part#
1631
1632
1633
1634
1635
1636
Product Description
Size
Flat Oval Access Door for Square Duct
180x80mm
250x150mm
300x200mm
400x300mm
500x400mm
600x450mm
Sold As
Ctn Qty
Each
Each
Each
Each
Each
Each
10
5
5
5
5
5
FLAT DUCT ACCESS PANELS–Square/Rectangular
Easy Re-sealable ways of Access to Rigid Air-Conditioning Ducts for Maintenance & Cleaning Purposes

Galvanised Steel with Insulated Double-skin, 25mm Sandwich Construction of Lift-off type

Removable Door with Extruded ―Bulb-Type‖ Integral Gasket positioned door lower periphery

Removable Door is retained in Frame by Camlock to ensure a Positive Seal
Flat Access Doors are 25mm Sandwich Galvanised Steel construction with Fibreglass Insulation infill. They are a Lift-off type
having a minimum of 2 Retaining Camlock locks for fixing to Ductwork Frame. The Bulb-Type Integral Gasket ensures the
removable Door shall be effectively Sealed.
Part# Product Description
1137
1138
1139
1140
Access Panel—Small
Access Panel—Medium
Access Panel—Large
Access Panel—X-Large
Opening Size
Door Size
Frame Size
Market Size
Sold As
Ctn Qty
115x205mm
195x330mm
320x460mm
462x610mm
147x237mm
232x367mm
360x500mm
502x653mm
191x281mm
279x414mm
412x552mm
550x705mm
AP3
AP2
AP1
AP0
Each
Each
Each
Each
10
10
5
5
Page 18
______LATCHES, LOCKS & HANDLES
___________________QUICK RELEASE FASTENER

Hold removable access doors, panels, grills, covers, screens, filters, windows, placards, signs etc

Ideal for Blast gate Panels on Duct

Easy to install and no tools to operate

Are durable, strong and have a long life

Stops vibration
All metal
thickness
is 0.050
Part A, the spring plate, is the same size in all styles. Zinc-plated carbon steel fasteners are furnished with one hole
(.203‖ diameter). Spring with two holes are available. Stainless fasteners are furnished with two holes.
Part#
309068
309927
Product Description
Sold As
Pkt Qty
Each
Each
100
100
Fastener Quick Release (Style A1) - Zinc Plated
Fastener Quick Release (Style A1) - Stainless Steel
HOLD-DOWN LATCH—Nickel Plated______

Maximum Load = 55kg, Ultimate Tension = 150kg

Plain Latch available in Stainless Steel, POA

Padlock Option with 4mm size hole, POA, see picture below
Part#
1161
PLAIN
Product Description
Sold As
Hold-Down Latch—Plain (Nickel Plated)
Each
Pkt Qty
100
PADLOCK OPTION
_______________________________________SWIVEL LOK

An Economical and Dependable Closure for Smaller Access Doors and Panels

Spring Steel Washer that keeps Vibrations from Opening Doors

Heavy Stamped Steel Parts—Zinc Plated

Riveted Assembly—Large Diameter Rivet

Mount with 3/16‖ Rivet or #10 Screw
Part#
308098
Product Description
Sold As
Swivel-Lok
Each
Pkt Qty
100
CAM LOCK (sometimes called a Sash Lock)_____________

A Two Piece Door Locking Fastener (for either Flush or Right Angle Applications

An Economical Alternative to other types of Door Fastening Systems
Part#
1283
Product Description
Cam Lock—for Applications on same level or flush surface
Cam Lock—for Applications where a Corner or Right Angle
1283C Attachment is required—simply drill holes and pop rivet in
desired position (picture B)
Sold As
Pkt Qty
Each
100
Each
100
B
Page 19
______LATCHES, LOCKS & HANDLES
____________________________PIANO HINGE
Other sizes & finishes are available on request, POA
Part#
Product Description
Sold As
1054 Steel Hinge——1800mm x 32mm (Zinc Plated)
1054H Steel Hinge——1800mm x 32mm (Zinc Plated) ***with Holes***
1054S Steel Hinge——1800mm x 32mm (304 Stainless Steel)
Each
Each
Each
_____________ACCESS DOOR HANDLE—3/8‖ Shaft Size

Strong Zinc Alloy Casting, Finger Grip allows for Opening from the Inside

Recommended for Doors Up to 24‖ x 24‖

Accommodates Door/Frame Up to 2‖ (1 5/8‖ with Collar)

Steel and Neoprene Washers (2 Each) Provide Airtight Performance
ACCESS DOOR HANDLE—1/2‖ Shaft________________
Designed to meet today’s needs, Handle Set has aesthetically pleasing appearance and is functional in operation.

Strong Zinc Alloy Casting

Recommended for Doors Up to 48‖ x 48‖

Accommodates Door/Frame Up to 2‖ (1 5/8‖ with Collar) & Doors Up to 2‖ Thick

Steel and Neoprene Washers (2 Each) Provide Airtight Performance

Set Comes Complete with Two Steel Washers and Two Neoprene Washers for Airtight Installation
________
ACCESS DOOR HANDLE—Heavy Duty
A versatile, industry leading, heavy duty handle set for equipment cabinets with door thicknesses of up to 4‖.

1/2‖ Diameter Cold-Rolled Steel Shaft, Zinc Plated and Fully Secured Handle

High Strength ZAMAC 3, Mounting Plate and Door Pull/Stop

Flat Milled Threaded Shaft with Knurled Set Screw Secures Handle

Threaded Shaft Accepts 1/2‖ x 13 Threaded Locknut

Inner Handle Safety Feature

Leak Resistant Neoprene Washer
Part#
308099
308100
308101
308102
Product Description
Access Door Handle— 3/8‖ (9.5mm) Shaft
Access Door Handle— 1/2‖ (12.5mm) Shaft
Access Door Handle— 2‖ (50mm) Doors
Access Door Handle— 3‖ (75mm) & 4‖ (100mm) Doors
Sold As
Each
Each
Each
Each
Page 20
_HVAC INSTALLATION
________DUCT BRACKET/HOLDERS

―L‖ Bracket is for Suspension of Rectangular Ductwork

―V‖ Brackets is for Suspension of Circular Ductwork using Threaded Rod.

―Z‖ Bracket is a Universal Duct Hanger using 10mm or 12mm Threaded Rod.

―DSM10‖ Duct Support Bracket has been designed for Rectangular/Square Ductwork suspension using
M10 Threaded Rod, is Easy to Install and comes with 4 handy Screw-holes
Part#
Product Description
Sold As
Ctn Qty
1071
1072
1073
1074
Duct Bracket, L—Zinc Plated (includes isolator pad)
Duct Bracket, V—Zinc Plated (includes isolator pad)
Duct Bracket, Z—Zinc Plated (includes isolator pad)
Isolater Pad, Black (Rubber)
Each
Each
Each
Each
100
100
100
500
1262
1202
Duct Nut, M10 Hex—Zinc Plated
Duct Nut, M8 Hex—Zinc Plated
Each
Each
100
100
Duct Support Bracket, DSM10—Zinc Plated
Duct Support Bracket, DSM10—Zinc Plated
Each
Each
250
Universal Joint, 3 Piece, UG M10— Zinc Plated
(800kg Load Capacity) ***Use with M10 Threaded Rod
Each
Each
50
Seismic Fixing Bracket—Zinc Plated
Seismic Fixing Bracket—HDG
Each
Each
100
100
Retrofit Bracket—Zinc Plated *Ideal for Seismic Applications
Each
100
1075
1075G
1201
1112
1112G
1209
(Also called a Duct
Hanger Bolt)
(Used with Wire Cable & then Hooks around Threaded Rod)
SIMPLEFIX TOP BRACKET—Zinc Plated_________
Simplefix Top Bracket makes it possible to support large diameter light-weight tubing with a Bracket System
that accommodates most large sizes suitable for PVC pipe and Round Ducting.
The cleverly designed Top Bracket will mould itself to fit the shape of any round surface, simply
cut the Zinc Plated Strapping to suit any Pipe or Round Duct Size
Part#
1409
Product Description
Sold As
Simplefix Top Bracket (Popular with the Simplefix 0.55x25mm
Ctn Qty
Each
100
Each
10
Strap but designed for 0.75x25mm Simplefix Strap)
1038
Simplefix Galvanised Strap—0.55 x 25mm x 25m
CIRCULAR DUCT CLAMPS, LINED —Zinc Plated/HDG
Part#
2 Piece Circular Duct/
Pipe Clamp are for the
easy installation of Spiral,
Circular or Round Duct
and it comes with Lining
to reduce vibration.
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1576
1577
Product Description
Duct Clamp with Lining,
Diam Size
100Ǿmm Zinc Plated
125Ǿmm Zinc Plated
150Ǿmm Zinc Plated
200Ǿmm Zinc Plated
250Ǿmm Zinc Plated
300Ǿmm Zinc Plated
355Ǿmm Zinc Plated
400Ǿmm Zinc Plated
450Ǿmm Zinc Plated
500Ǿmm Zinc Plated
560Ǿmm Zinc Plated
630Ǿmm Zinc Plated
Spiral/Round Duct Clamps (Outside Use)
Other sizes available,
POA
HVAC Hardware
Material
Load Kg
20x1.8mm
20x1.8mm
20x1.8mm
20x1.8mm
25x1.8mm
25x1.8mm
25x1.8mm
25x1.8mm
25x2.5mm
25x2.5mm
25x2.5mm
25x2.5mm
800
800
800
800
800
800
800
800
1200
1200
1200
1200
Sold As
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Permanent
Load Capacity
0.38kN
Each
1570 Duct Clamp, 150Ǿmm HDG (Safety Factor 2.5) 25x3.0mm
0.38kN
Each
0.38kN
Each
1.78kN
Each
1.78kN
Each
1.78kN
40x6.0mm
Each
1575
Duct
Clamp,
400Ǿmm
HDG
(Safety
Factor
2.5)
_ ___________________ AIRCON FLANGE PERFORMANCE
Page 21
______________HVAC INSTALLATION
_________________CLAMPS—BEAM & FLANGE/CORNER

Flange Clamps are ideal for joining additional joints onto ducting eliminating costs in drilling & pre-assembly

Quick & Easy to Install
Part#
Product Description
Sold As
Ctn Qty
1080
Beam Clamp—M10
Each
100
1082
Flange Clamp—3mm (M8 > 25mm Bolt)
Each
100
PURLIN CLIP______________________________
Purlin Clips (sometimes called Purlin Hangers or Purlin Brackets) are ideally suited for HVAC Hanging Services
Part#
Product Description
1518
Purlin Clip—M10 Zinc Plated
Sold As
Pkt Qty
Each
50
_______________________________DUCT NUT—M8 & M10
Part#
1202
1262
Product Description
Sold As
Duct Nut, Hex Head—M8 (Zinc Plated)
Duct Nut, Hex Head—M10 (Zinc Plated)
Also Called a Duct Hanger Bolt
Ctn Qty
Each
Each
100
100
MULTI-CLAMP & CLAMP BAND____________
The Clamp Band comes with a handy plastic container having 30M Strip inside and with a Multi-Clamp enabling the user to cut
it to any size to accommodate all sizes of Ducting.
Sold As
Pkt Qty
Band: 9mm width, 0.6mm thickness with rounded edges and
Each
50
smooth underside of banding prevents any risk of damage to the 1083 Multi-Clamp
1084 Clamp Band—30m
Each
10
Ducting or Pipe being clamped.
STEEL & POLYWEAVE DUCT STRAPPING____
Made of galvanized perforated steel with assorted holes which allow for the fixing of :

Threaded Rod, Threaded Clamps, Bolts (takes M8 Bolt) etc

The small holes can be used with rivets, screws or nails

A Hanging System that Adjusts to fit all sizes of Pipe and Ducting
Part#
Product Description
Sold As
Ctn Qty
1085
Multi-hole Suspension Strap/Band, 0.55 x 25mm x 25m—Galvanised
Each
10
1038
Simplefix Strapping, 0.55 x 25mm x 25m— Galvanised
Each
10
1108
1109
Blue Strapping—19mm x 1000m
Poly Buckles—19mm
Each
Each
3
1000
Page 22
_________GASKET/DUCT FOAM & INSULATION TAPE

Single Sided PVC Closed Cell Tape offering great Sealing Properties and Coated with an
Aggressive Acrylic Adhesive. Foam has excellent Resistance to Ageing, Sound Transmission,
Water Absorption, Ozone and Solvents.
APPLICATIONS:
Suitable for sealing Rigid Air Conditioning Duct Flanges, Ventilation Grilles and
Fire Dampers as foam non-toxic when burnt
Part#
1035
1036
1258
Product Description
Sold As
Ctn Qty
Each
Each
Each
25
20
20
Foam Gasket Tape, Black—5mm x 12mm x 15m
Foam Gasket Tape, Black—5mm x 15mm x 15m
Foam Gasket Tape, Black—3.2mm x 20mm x 30.5m
ADHESIVE HVAC TAPES____________________
PVC & Aluminium Foil Tapes

Plasticised PVC Sealing and Joining Tape is ideal where a Tight Seal is required on Irregular Shaped Objects.
The 4258 PVC Sealing and Joining Tape is more suitable to colder conditions and has higher specifications.

Aluminium Foil Tape— Premium Grade Aluminium Foil Coated with a High Tack Permanent Acrylic Adhesive.
Resistant to UV Light , Ageing and High Temperatures. Suitable for Air-Conditioning Ductwork and creating Moisture
Barriers in Refrigeration units.

Reinforced Tape—Premium Grade Reinforced Aluminium Foil that can easily be torn by hand. Ideal for use in
Duct Insulation on Sheetmetal and Flexible Air Conditioning Ductwork/Acoustic Wraps as well as Joining Foil
Insulation used in Wall and Roof Insulation.
Part#
Product Description
1030B PVC Sealing & Joining Tape, 48mm x 30m—Black
1030 PVC Sealing & Joining Tape, 48mm x 30m—White
1037 PVC 4258 PREMIUM Sealing & Joining Tape, 48mm x 30m—Grey
(Ideal for Colder Conditions)
Sold As
Ctn Qty
Each
Each
Each
60
60
36
1033
1212
Each
Each
24
16
1034
1213
Each
Each
24
16
Page 23
____HVAC INSTALLATION
DUCT SEALANTS & SILICONE
Metal Adhesive, Silicone, Water Based & High Temp Sealants
Product Specifications are available on Request for all Sealants
Part#

BOSTIK MS Safetech is a Multipurpose odour free, isocyanate free, solvent free highly flexible sealant for construction
& building. It’s UV Safe and fully Paintable according to DIN 52452, Part 4 which is suitable to most common building
materials & all connection & movable joints, indoor and outdoor. It’s ideal for all construction joints but not designed to
seal immersed joints, below water applications or floor joints.
**DO NOT USE: On Bitumen, Polyethylene & Teflon. It is also available in White

BOSTIK FR Duct Sealer is a fire retardant, non slump, fast drying sealer. Once fully dried, FR Duct Sealer remains
Flexible, performing over a wide temperature range on both internal and external surfaces. It is paintable and bonds well
to most commonly found Construction Surfaces such as Zinc Plated Steel, Foils used in Ducting, other Metals, Wood &
Concrete. It can be used to seal Lap Joints in Heating, Air Conditioning Ducts & Roofing.
**DO NOT USE: With Blown Polystyrene Panels due to Solvent Attack

BOSTIK Industrial Grade Clear Silicone Sealant/Adhesive is a high performance premium quality neutral cure Silicone
Sealant designed for sealing and adhering to a wide variety of products and surfaces while offering Glazing and
Weather-seal applications. It remains Permanently Flexible and is suitable for both indoor and outdoor Applications.
It cures by absorption of the atmosphere moisture to form a Flexible and Durable Elastomeric sealant. It has a Low
Odour and is Waterproof, unaffected by Rain, Snow, Extreme Temperature Change and Constant UV Exposure.
Ideal for using in lap joints in Metal Guttering, Aluminium Roofing, Flashings, Down Pipes, seals between Glass and
Aluminium, Timber and Glass, Perimeter seals between Aluminium Window Frames, Brick and Masonry, Airseals in
Concrete Panels, Electrical Applications, Marine Work or as a Multi-Purpose Sealant/Adhesive in General Construction
and Industrial Maintenance Applications

GALVA MATE is a High Performance Adhesive and Sealant specifically designed for sealing High & Low Velocity
Ducting in Heating and Ventilation Applications. It remains Permanently Flexible and has a Very Strong Adhesion to
Zinc Plated and Stainless Steel surfaces. Can be Over-painted when cured.

HEAT MATE is a High Modulus, Reactive Curing Silicone Sealant specifically designed for High Temperature Use.
HEAT MATE cures quickly to reduce dirt pick up and remains Permanently Flexible, forming a Weathertight, Waterproof
Rubber-like Seal. Heat Mate is ideal as a Gasket Sealant or for using in Joints & Assemblies like Ducting, Metal
Chimneys, Industrial/Domestic Ovens and Heating Appliances. ***DON’T USE on Porous surfaces like Masonry.

FIRE MATE (Intumescent Fire Protection & Acoustic Sealant) is a Fire Retardant Sealant that swells when exposed
to temperatures in excess of 125° to prevent the passage of Fire & Smoke. In suitably designed joints, a fire rated joint
of up to 5 hours may be achieved (when tested to BS476 Part 20/EN1366-4 (2006)). It has excellent Acoustic properties
for Sound Deadening and is Halogen Free. It is also Permanently Flexible (+/-12.5% movement accommodation) and
has excellent Non-Slump properties for Overhead Use and can be Overpainted.
Uses: Sealing/Filling Gaps in Fire-Rated Partition Walls/Structures, Sealing Glass to Timber/Aluminium in Fire-rated
Glazing applications, Sealing Gaps in Fire-Rated Walls and Service Trunkings, Sealing around Door Frames, Sound
Deadening around Plasterboard Panels & Joints, Sealing Low Movement Construction Joints.

EVERFLEX Black Silicone is a low modulus, Neutral Cure RTV silicone sealant that adheres to a wide range of both
Porous and Non-porous surfaces without the need for Priming. It has excellent adhesion to most common surfaces
including Glass, Metals, Plastics & Wood with an excellent flexibility of +/- 25%. It can be used over Waterbased and
Solvent based paints and is suitable for use on Polycarbonate. It has excellent External Weathering Properties.
Uses: Perimeter Pointing internally/externally around PVC/Wood & all other Window Frames, Sealing adhesive onto PVC,
Plastic Trims & Components, Bedding Insulated Glass Units, Suitable as an Expansion Joint Sealant, Weather Sealing/
Joint Sealing Pre-formed Panels, Sealing soft Metals as Lead, Copper & Zinc, General Glazing Sealing and Draughtproofing (including repair work over existing sealant), Glass to Glass and also Glass to Aluminium Sealing,
Product Description
Sold As
Ctn Qty
1341
Bostik MS Safeseal—Grey 550gm Silicone ***Paintable **Also avail in White
Each
12
1049
Bostik FR Duct Sealer—Grey, 375ml
Each
20
1260
Bostik Industrial Neutral Cure Sealant—Clear, 300ml
Each
20
1078
Galvamate Duct Sealer—Grey, 310ml **Water Based/Paintable when cured**
Each
25
307992 Fire Mate Intumescent Fire Protection & Acoustic Sealant– 300ml (-50 to 285° C)
Each
25
309983 Heat Mate High Temperature Silicone Sealant—300ml (up to 300° C)
Each
12
25
1455
Everflex Silicone—Black Neutral Cure (300ml)
Each
1333
Professional Caulking/Sealing Gun ***300-380ml Capacity***
(sturdy skeleton gun with hexagonal rod, reinforced ring & hook end)
Each
Page 24
_________HVAC INSTALLATION
_DUCT STRAPPING OPTIONS & DUCT STRAPPING TOOL
Nylon Duct Straps are a cost effective way to secure flexible duct to pipes, fittings or outlets.
This method ensures a fast, clean application eliminating the need for clamps, screws or tape.
Ductstraps are come packed in 50 per Packet and there are 40 Packets per Carton (Carton of 2000)
Part#
308241
308242
308243
305529
1050
1051
1056
1057
1108
1109
1109W
Product Description
Duct Straps/Cable Ties, Natural — 24‖/610mm
Duct Strapping Tool
Duct Diam
(< 150mm Diam)
(< 250mm Diam)
(< 350mm Diam)
Sold As
Pkt/Ctn Qty
Each
Each
Each
Each
Pkt/50 Ctn/2000
Pkt/50 Ctn/2000
Pkt/50 Ctn/2000
Cable Ties, White—300mm x 3.6mm
Cable Ties, Black—300mm x 3.6mm
Each
Each
Each
Each
100
100
100
100
Buckles, Poly (for Blue Strapping #1108)
Buckles, Wire (for Blue Strapping #1108)
Each
Each
Each
3
1000
1000
STEEL & POLYWEAVE DUCT STRAPING_
Made of galvanized perforated steel with assorted holes which allow for the fixing of Threaded Rod, Threaded
Clamps, Bolts (takes M8 Bolt) etc.
The small holes can be used with rivets, screws or nails.
A Hanging System that Adjusts to fit all sizes of Pipe and Ducting
Part#
Product Description
Sold As
Ctn Qty
1085
Multi-hole Suspension Band/Strap, Galvanised—0.55 x 25mm x 25m
Each
10
1038
Each
10
1409
Simplefix Top Bracket (Popular with the Simplefix 0.55x25mm Strap but
Each
100
designed for 0.75x25mm Simplefix Strap)
Page 25
_____________________CABLE SYSTEM
Wire Rope/Cable Systems are quick, convenient and user friendly methods system when installing service applications like
Roof Suspension Systems, HVAC, Hanging Mechanical Services, Electrical Services, Installing Cable Trays, Channel, and
Catenary. It is particularly popular now with Seismic Applications.
The product is used for Suspending or Bracing:

Mechanical and Electrical Services

Heating, Ventilation and Air-Conditioning Services

Panels for Cold Rooms

Seismic Bracing

Other Suspended Services
Part#
Product Description
Sold As
1429
Pkt/Ctn Qty
Wire Rope/Cable—2.5mm, Galvanised Plated 7/7 (100m Reel)
Breaking Load 360 kg
1086R Wire Rope/Cable—3mm, Galvanised 7/19 (100m Reel)
Breaking Load 480kg
1087R Wire Rope/Cable—4mm, Galvanised 7/19 (100m Reel)
Breaking Load 850kg
Each
1501S Wire Rope/Cable—2.0mm, Stainless Steel 7/7
Each
Each
Each
Can be sold
by the Metre
Also
Each
Each
Each
Each
500
500
500
500
1335
1561
1116
1349
Alloy Ferrules, Swage or Crimps—2mm
Alloy Ferrules, Swage or Crimps—2.5mm
Alloy Ferrules, Swage or Crimps—3mm
Alloy Ferrules, Swage or Crimps—3.5mm
***Alloy is for Indoor Use only****
1335S Copper Ferrules, Swage or Crimps —2mm
***Outdoor Use**
1349S Copper Ferrules, Swage or Crimps—2.5mm
***Outdoor Use**
1116S Copper Ferrules, Swage or Crimps—3mm
***Outdoor Use**
***These are actually Nickel Plated Copper Swage for use with
Stainless Braided Wire Rope and has a Stainless look*
1379
Crimping/Swage Tool—Hand Operated (includes Cutting Device)
(For Cutting Wire Rope 1.5mm—3.0mm thick)
1379L Crimping/Swage Tool—Hand Operated (includes Cutting Device)
Each
Can be sold
by the Metre
Also
Each
Each
Each
Each
Each
Each
1211
Cable/Wire Cutters
Each
1209
Retrofit Bracket—Pregalv
(Used with Wire Cable and then Hooks around Threaded Rod)
***Ideal for Seismic Applications***
Each
100
Each
Each
100
100
Zinc (Yelllow)
Each
100
Zinc Plated
Each
100
1112 Seismic Fixing Bracket—Pregalv Plated
1112G Seismic Fixing Bracket—Hot Dipped Galv
1544
Tech Screw, Eye Screw Metal Purlin—14 x 55mm
1394
Eye Screw—M10
Seismic Kits are available on Page 30
Page 26
______CABLE SUSPENSION SYSTEM—KwikWire
The KwikWire Clamp/Wire Rope system is designed to suspend static loads. Its Hanging and Installing service applications
include Ducting, Roof Suspension Systems, HVAC, Signs, Hanging Mechanical Services, Electrical Services, Installing Cable
Trays, Channel, Lights, Shade Sails, Mining Supports, Balustrade and Catenary.
Rectangular/Circular duct is one of the most common applications used with KwikWire Clamp. The hangers can be attached to
bearers, fastening points on the duct if available, or used in a cradle method.
Suspend ducting from the ceiling is simple and fast using the versatile and flexible KwikWire Clamp Cable System
1
2
3
4
5
Application Notes
(1) Pass the wire rope through the KwikWire™ Clamp
(2) Loop wire rope through/around support
(3) Pass wire rope back through KwikWire™ Clamp
(4) Push wire rope through clamp leaving 2‖ to 3‖ tail, then apply tension on wire rope
(5) To adjust, remove tension and pull wire rope slightly to disengage teeth, slide
adjustment pin in direction shown by arrow to release wire rope.
No tools are required.
RMD =
Recommended Minimum Distance
= 3 times the width of duct/tray etc
The KwikWire Clamps can be installed both quickly and easily. The product is used for Suspending or Bracing :


Seismic Bracing


Other Suspended Services


Reduces Installation time
KwikWire Clamp Working Loads*
KwikWire
Wire Rope
Lbs/Kg Safety
Clamp
Diameter
Factor 5
BKC100
BKC100
BKC200
BKC200
1/16”/1.6mm
3/32”/2.3mm
1/8”/3.2mm
3/16”/4.8mm
0-75 (0-34kg)
25-150 (11-68kg)
25-250 (11-113kg)
50-640 (22-290kg)
* Working Loads shown are for hanging Vertically.
For Suspending at 15˚, 30˚,45˚,60˚ angles
from Vertical, use the following percentage
of the working loads from the chart
15˚ = 96%
30˚ = 86%
45˚ = 70%
60˚ = 50%
Part#
Product Description
1086
1087
KwikWire Clamp—BKC100 (1/16‖/1.6mm & 3/32‖ /2.3mm)
KwikWire Clamp—BKC200 (1/8‖/3.2mm & 3/16‖/4.8mm)
1463
1464
1465
1466
1211
KwikWire Wire Rope (Uncoated 7/7 Galvanised Wire) - 1/16‖/1.6mm x 152m
KwikWire Cable Cutter—for cutting all Wire Rope Sizes (prevents fraying)
Working Load
96 Lbs/43.5 Kg
184 Lbs/83.4 Kg
340 Lbs/154.2 Kg
840 Lbs/381.0 Kg
Sold As
Ctn Qty
Each
Each
100
50
Each
Each
Each
Each
Each
Can be
Sold by
Metre
Also
KwikWire System Recommendations:

Do not Exceed the Safe Working Load of the products

KwikWire Clamp loadings are guaranteed only when used in conjunction with KwikWire Wire Rope above

Do not apply Lubricant, or use in Chlorinated or Caustic atmospheres, for use in Dry locations only

Do not use if Cable or Components are Visibly Distorted or Worn. Remove Damaged Cable prior to use

Do not Paint Cable near Working Area of KwikWire Clamp

Do not use Clamp on Coated Wire Rope

Page 27
_____CABLE SUSPENSION SYSTEM—Kwikwire
KwikWire Hanger
KwikWire Hanger combines the versatility of a bolt with an adjustable wire rope solution.

Can be quickly installed in existing anchors or metal brackets with a nut.

Ideal for supporting light fixtures, wire basket cable tray, HVAC ducts, and sign/banner supports

Allows for tool-less adjustment of wire rope.
1. Screw KwikWire Hanger into installed hanger support
2. Push cable wire up through the bottom of KwikWire Hanger
3. Continue pushing through until 1/4‖ minimum is extending out the side of the KwikWire Hanger
4. To adjust up - pull or push more cable wire through KwikWire Hanger
5. To adjust down - push up on bottom of KwikWire Hanger and allow cable wire to feed down
6. When hanging the cable wire is complete, cut off any excess cable wire if desired
1
2
3
Part#
Product Description
Sold As
1208
KwikWire Hanger, BKF100-6
Each
5
4
Ctn Qty
100
6
KwikWire Hanger
Wire Rope
Diameter (mm)
Working Load
Lbs/Kg
Safety Factor 5
1/16”/1.6mm
3/32”/2.3mm
45 (20.4 kg)
90 (40.8 kg)
CABLE/WIRE ANCHORING SYSTEMS
The following Fastening Options are used for Suspending or Bracing and are quick, convenient and user friendly
system when installing service applications like Roof Suspension Systems, HVAC, Hanging Mechanical Services,
Electrical Services, Installing Cable Trays, Channel, and Catenary.


Part#


Seismic Bracing
Product Description
Sold As
Ctn Qty
1391
Dog Leg Anchor, Tie Head—6.5mm x 32mm
Zinc Plated
Each
100
1501
Tie Wire, Internal Threaded—M10 (has a 10mm Eye)
Zinc Plated
Each
100
1394
Eye Screw—M10
Zinc Plated
Each
100
1544
Tech Screw, Eye Screw Purlin— 14 x 55mm
Zinc (Yellow)
Each
100
1393
Swag/Cup Hook Bolt—8mm x 40mm
Zinc (Yellow)
Each
100
1392
Eye Bolt Sleeve Anchor—8mm x 40mm
Zinc (Yellow)
Each
100
1395
Eye Bolt—M10 x 75mm
Zinc Plated
Each
100
1438
1439
Eye Bolt Screw—6mm x 50mm
Zinc Plated
Zinc Plated
Each
Each
25
25
1502
1503
Swag Hook Bolt—6mm x 50mm
Zinc Plated
Zinc Plated
Each
Each
25
25
1229
Ceiling Suspension Anchor—6.5 x 25mm
Zinc (Yellow)
Each
100
1623
Powers Through-Bolt Seismic Anchor—M10 x 90mm Zinc Plated
Each
100
1209
Retrofit Bracket—PreGalv ***Ideal for Seismic Applications
Each
100
Page 28
_____HVAC INSTALLATION
__CABLE SUSPENSION SYSTEM—Rize Zip-Clip
SMACNA approved (include Seismic options to meet NZ Building Code 4219
Rize Zip-Clip (Cable Lock Mechanism & Wire Rope) - 5:1 Safety Factor
Rize Zip-Clip system is designed to support Static Loads Only, Dynamic and Shock Loadings can greatly increase the overall
weight of the product being suspended and therefore can compromise Safe Working Loads of Suspension.
To ensure Integrity and Safety of this system, only Zip-Clip Wire MUST be used with the Rize Zip-Clip
BENEFITS: *Fast & Easy with No Pre-Site Visits
*Only Wire Cutter Required
*Key-Free Release System,
*Any Spare Material can be used on Following Projects
Applications: Wrap Around Applications

HVAC & Mechanical: Spiral/Rectangular Ducts, Radiant Heat Panels, Fan Coil Units, Chilled Beams, Gas/ Water Pipes

Electrical: Luminaires, Busbar, Cable Basket, Cable Tray, Cable Ladder, Trunking, High Bays, CCTV Cameras,
Secondary Support & Sound Systems

Specialist: Seismic Bracing, Cold Rooms, Prefabrication, Signage & Shop-fitting, Bespoke Brackets, *Sports Halls
*Chlorinated Environments & *Food Environments
Please note: * For Chlorinated and Food Environments, a Stainless Steel System must be Used, POA
DO NOT: Use Coated Wire, Paint or apply any other Coating, Apply Lubricant, Use for Lifting
Part#
1600
1601
1602
1603
1600R
1601R
1602R
1603R
Product Description
Safe Working Load
Zip-Clip Rize KL50 Clip Only
(5:1 SF)
(5:1 SF)
(5:1 SF)
(5:1 SF)
Zip-Clip 200 Metre Reel—‖G‖ Green for KL50
Zip-Clip 100 Metre Reel—‖S‖ Silver for KL100
Zip-Clip 100 Metre Reel—‖Y‖ Yellow for KL150
Zip-Clip 100 Metre Reel—‖P‖ Purple for KL200
Sold As
Pkt Qty
10 kg SWL
50 kg SWL
120 kg SWL
230 kg SWL
Each
Each
Each
Each
10
10
10
10
10 kg SWL
50 kg SWL
120 kg SWL
230 kg SWL
Each
Each
Each
Each
1620
Zip-Clip Concrete Anchor—M6 x 25mm (90kg Load)
Zinc Plated
Each
50
1214
1211
Zip-Clip Tensioning Tool
Zip-Clip Wire Cutters
Each
Each
1604
Zip-Clip Corner Protector (For Square/Rectangular Ducting)
Each
50
1605
1606
Zip-Clip PVC Wire Cover—100m x 3mmǾ (For G & S Range of Wire)
Zip-Clip PVC Wire Cover—100m x 6mmǾ (For Y & P Range of Wire)
Each
Each
-
Suitable for Areas that need Wire Disguised when supporting Spiral Duct,
Aesthetically pleasing and acts as an Insulator to perform Vapour Seals
TECHNICAL DATA—FOR ZIP-CLIP & WIRE
Physical Properties (Zip-Clip)
Density
Solidification Shrinkage
Casting Shrinkage
Freezing Range
Melting Point
Specific Heat Capacity
Thermal Expansion
Thermal Conductivity
Electrical Conductivity
Electrical Resistivity
Mechanical Properties (Zip-Clip)
6,700kg/m3 at 21˚C
1.17%
0.6% (pressure diecasts)
-381 to -387˚C
400 to 420˚C
418.1 J/kg/˚C at 20 to 100˚C
27 10 (-6) linear per ˚C at 20 to 100˚C
108.9 W/m.hr/m2/˚C at 70 to 140˚C
26% IACS
6.5359 um ohm cm at 20˚C
Tensile Strength (MPa)
Shear Strength (MPa)
Elongation (% in 51mm)
Hardness (Brinell—500kg)
Impact Strength (Energy, Joules)
Fatigue Strength 5 x 10 cycles (MPa)
As Cast
328
262
7
91
65.1
56.5
Aged
269
13
80
54.2
-
Table below shows the Effect on the Safe Working Load when working at an Angle from the Vertical
Wire Code Vertical
15˚
30˚
45˚
60˚
―G‖
―S‖
―Y‖
―P‖
10kg
50kg
120kg
230kg
9.6kg
48.0kg
115.2kg
220.8kg
8.6kg
43.0kg
103.2kg
197.8kg
7.0kg
35.0kg
84.0kg
161.0kg
5.0kg
25.0kg
60.0kg
115.0kg
LOAD
100%
96%
86%
70%
50%
Construction Tensile Strength
7x7
(6/1) RHRL
High Tensile
Zinc Plated
1960N/mm2
Page 29
________HVAC INSTALLATION
CABLE SUSPENSION SYSTEM—Rize Zip-Clip
SMACNA approved and Seismic options to meet NZ Building Code 4219
Rize Zip-Clip—Seismic Kits (Fully Compliant with the Building Code 4219)
Rize Zip-Clip Seismic Kits come supplied on a pre-determined length of cable with End-fixings,
one of the Brackets already has the wire pre -looped around it, the other Bracket can go around
the rod or be attached to the duct.
The kits come in two sizes Blue 3.0mm wire rated to 84kg on 45 degree & Green 4.0mm wire
rated to 210kg on 45 degree, both with a safety factor of 5 :1.
Part#
Product Description
Sold As
Ctn Qty
1607
1608
1609
Zip-Clip Blue Seismic Restraint –2m (with Bracket & Clip, 45˚ - 84kg SWL)
Each
Each
Each
50
50
50
1610
1611
1612
Zip-Clip Green Seismic Restraint –2m (with Bracket & Clip, 45˚- 210kg SWL)
Each
Each
Each
50
50
50
1613
Zip-Clip Bracing Bracket (for Rod Suspensions 13mm)
50
1460
Zip-Clip FAZ II Seismic Ceiling Anchor—240kg
Zinc Plated
(Refer to diagram below, left for FAZ II Seismic Ceiling Anchor installed)
50
1569
1578
1580
1580B
1592
1592B
1581
1582
1591
1645
Powers Seismic Vertigo Plus Concrete Anchor, M10 x 54mm —ZP
Koken 1/2DR Impact Socket—18mm #1569
Powers Seismic Wedge-Bolt Plus Concrete, M6 x 43mm
Powers Seismic Wedge-Bolt Plus SDS Drillbit - 1/4‖
Powers Seismic Wedge-Bolt Plus, M10 x 75mm—ZP
Powers Seismic Power-Bolt Plus, M12 x 69mm—ZP
Powers Seismic Power-Bolt Plus, M12 x 94mm—ZP
Powers Seismic PBT Through--Bolt Plus Anchor M10 x 90mm—ZP
Powers Seismic Power Stud Plus SD2, 3/8‖ x 3 1/2‖ - ZP
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
50
100
100
100
100
50
100
Rize Zip-Clip
Seismic Kits are
Packaged in 5’s
Installation of Zip-Clip Seismic Bracing Systems
BASIC LAYOUT OF
BRACING SYSTEM
FIRE PROTECTION


Pass the wire through the Zip-Clip in the direction of the arrow

Loop the wire through the 8mm hole of the seismic rod bracing bracket

Pass the wire back through the Zip-Clip allowing 15cm of wire protruding

Apply tension






Install Zip-Clip rod seismic bracing bracket on to ducting and secure into
place using a bolt
Pass the wire through the Zip-Clip in the direction of the arrow
Loop the wire through the 8mm hole of the seismic rod bracing bracket
Pass the wire back through the Zip-Clip allowing 15cm of wire protruding
Apply tension
Install the Zip-Clip Seismic Ceiling Bracket using the FAZ Anchor
Ensure that the wire does not exceed a 60 degree angle
Page 30
Installation of Zip-Clip Seismic Bracing Systems—Ducting Supports
TRAPEZED RECTANGULAR DUCTING
TRANSVERSE INSTALLATION







LONGITUDINAL INSTALLATION

Install Zip-Clip rod seismic bracing
bracket on to the strut and secure into
place using the rod with stiffener

Pass the wire through the Zip-Clip in
the direction of the arrow

Loop the wire through the 8mm hole of
the seismic rod bracing bracket

Pass the wire back through the Zip-Clip
allowing 15cm of wire protruding


Apply tension
Install the Zip-Clip Seismic Ceiling
Bracket using the FAZ Anchor


Ensure that the wire does not exceed a
Transverse Bracing restrains Seismic forces perpendicular
to a run of braced Piping or Ductwork. During an earthquake, a
vertical force may be generated, therefore Rod Stiffeners are
required so as to ensure the rod does not buckle.
Install Zip-Clip rod seismic bracing bracket on
to the strut and secure into place using the
rod with stiffener
Pass the wire through the Zip-Clip in the
direction of the arrow
Loop the wire through the 8mm hole of the
seismic rod bracing bracket
Apply tension
Install the Zip-Clip Seismic Ceiling Bracket
using the FAZ Anchor
Install the Seismic Ceiling Bracket
Ensure that the wire does not exceed a 60
Longitudinal Bracing restrains Seismic forces parallel to
a run of braced Piping or Ductwork. During an earthquake, a
CIRCULAR DUCTING







Install Zip-Clip rod seismic bracing bracket
on to ducting and secure into place using a
bolt
Apply tension







to ducting and secure into place using a bolt
Apply tension
degree angle
Page 31
Installation of Zip-Clip Seismic Bracing Systems—Mechanical Pipe Supports
TRAPEZED PIPE RUNS








Install Zip-Clip rod seismic bracing
bracket on to ducting and secure into
place using threaded rod





Apply tension

degree angle
Transverse Bracing restrains Seismic forces perpendicular
to a run of braced Piping or Ductwork. During an earthquake, a
to ducting and secure into place using
threaded rod
Apply tension
degree angle
Longitudinal Bracing restrains Seismic forces parallel to
a run of braced Piping or Ductwork. During an earthquake, a
TRAPEZED CABLE TRAY SUPPORTS







on to ducting and secure into place using
threaded rod




Apply tension


60 degree angle

on to ducting and secure into place using
threaded rod
Apply tension
Page 32
__CABLE SUSPENSION SYSTEM—Rize Zip-Clip
Rize Zip-Clip Suspension Options—Cable
SMACNA approved
Rize Zip-Clip End Fixings come in a variety of length options which are designed to be used for different applications with different
weight capacities. All End-Fixing options are in Packets of 10
Please note: Most products listed on this page are available in 1m, 2m, 3m 4m, 5m & 10m in a 10kg,
50kg, 90kg SWL option, POA
Due to the numerous options available, not all product is stocked,
leadtimes may take up to 2 weeks unless advised otherwise
Rize Zip-Clip Loop-Lock & Carabiner
Zip-Clip options offer Engineers a Total Suspension Solution consisting of High Quality Products to SPEED up the Installation of
Electrical, Mechanical & HVAC Services
Zip-Clip Loop-Lock
Ideal for Looping around Beams, Purlins, Roof Trusses & other existing Building Features
Available in 1m, 2m & 3m
SWL = Safe Working Load 45kg/90kg/200kg options
Zip-Clip Carabiner
Ideal for Baskets, Trays, Chilled Beams, Radiant Heat Panels & Signage
SWL = Safe Working Load 45kg/90kg options
Rize Zip-Clip Con-Lock
The Zip-Clip Con-Lock System is a universal Concrete Anchor System to suit most Concrete types including Slagged, Reinforced,
Cracked, Slab and even Hollow Pot.
The system is Self-Setting so just a few taps with a Hammer and Job Done! No Claw Back is required
***INSTALLATION***




Simply Drill a 6mm Hole to a minimum depth of 30mm
Hammer in Fixing, Anchor is Fixed
Simply Thread wire through the Zip-Clip Con-Lock in
the direction of Arrow
Around your Service and then back through Zip-Clip
Rize Zip-Clip Thread It & Knock It—Popular for Concrete Applications and very Quick to Install
Zip-Clip Thread It—M8 x 20mm
Zip-Clip Thread It is suitable for Lighting, Trunking, Busbar & Cable Management Systems
Zip-Clip Knock It
Zip-Clip Knock It is Great for Non-Wrap Applications ie. Roofing
(available in 1-5mm clip or 5-7mm clip which is 3m long)
SWL = Safe Working Load 35kg
Page 33
______PRODUCTS USED IN SEISMIC APPLICATIONS
Please note: Structural Engineers will need to authorise these products,
it is the installers responsibility to use fit for purpose product for the application.
Specifications/Data Sheets can be supplied on request
#1086 Kwikwire BKC100 Clamp
#1087 Kwikwire BKC200 Clamp
Used for Hanging Ducting, Pipework,
Roof Suspension Systems, Cable trays etc
Kwikwire Clamps is a Cable Lock System
Use with Kwikwire Zinc Plated Rope
#1630 Hanger SC228 Rod Stiffener—Zinc Plated
Secures Channel to Hanger Rod
for Vertical Seismic Bracing
#1208 Kwikwire BKF100 Hanger
Screws into a M10 Fastener, simply
thread 1.6mm or 2.3mm Kwikwire
Cable through the bottom of Hanger
while pressing button at base of the
Hanger, releasing button locks
Kwikwire Cable in place
#1075 DSM10 Bracket—Zinc Plated
Duct Support Bracket
Used for Hanging Square/Rectangular Ducting
using Threaded Rod, Tech Screws
#1112 Seismic Fixing 45˚ Bracket—Zinc Plated
(also available in HDG)
Used in Conjunction with Wire Cable
Kwikwire Uncoated Wire Cable—Zinc Plated
#1463 1.6mm 7/7 Galv Wire (43kg load)
#1464 2.3mm 7/7 Galv Wire (83kg Load)
#1209 Retrofit Bracket —Zinc Plated
Used with Wire Cable & hooks around Threaded
#1018 M10 Threaded Rod—Zinc Plated
(also available in M8, M12 or Zinc Plated)
#1086 Kwikwire BKC100 Cable Lock
#1087 Kwikwire BKC200 Cable Lock
Fast and Easy to Use Cable Locking System,
BKC100 maximum weight 68kg & BKC200
maximum weight of 290kg. Use only with
Kwikwire Uncoated Wire Cable
Channel/Strut —PreZinc Plated or HDG
Used for Mechanical Support, Installation
of Airconditioning Applications
41x41mm profiles & 41x21mm profiles
Slotted and Unslotted options
1.5mm, 1.6mm, 2.00mm, 2.5mm thickness
Zip-Clip Seismic Restraints Kits
Comes with Bracket & 45˚ Clip
Supplied in 1m, 2m, 3m, 5m & 10m lengths
of Cable with Bracket & 45˚ Clip
84kg & 210kg SWL options
#1623 Thru Bolt HST Safety Stud Anchor-Zinc Plated
#1623S Thru Bolt HST-R Safety Stud Anchor—Stainless
M10 x 90mm
Designed to Excel in Cracked Concrete
Wire Rope/Cable & Ferrules/Crimps/Swages
#1086R 3mm 7/19 Galv Wire (480kg Load)
#1087R 4mm 7/19 Galv Wire (850kg Load)
#1335 2mm Alloy Ferrules/Swages/Crimps
#1561 2.5mm Alloy Ferrules/Swages/Crimps
#1116 3mm Alloy Ferrules/Swages/Crimps
#1349 3.5mm Alloy Ferrules/Swages/Crimps
#1460 FAZ II Seismic Ceiling Anchor
Zinc Plated (240kg capacity)
Used for Fixing of Steel & Wood Constructions,
Railings, Staircases, Consoles, Ladders, Cable
Trays, Gates, Facades & Window Elements
Suitable for Cracked/Non-cracked Concrete
C12/15, C20/25 to C50/60 & Natural Stone with
dense structure
#1201 Sikla Universal Joint is used for attaching
Non-Horizontal components which may be fixed
Image below
directly to Building Surfaces, Beam Clamps,
shows Sikla
Channels etc. Typical applications would include
Universal Joint easy On-Site manufacture of various Rod
(3 piece)
Assemblies to Support Brackets, Reinforcement
used with M10
Struts for Sliding and Fixed Point Application.
Rod

Length & Height Adjustment via Rotation of the
Grub Screw in the Threaded Pivot Head

Infinitely Variable Angle Adjustment

Length Securely Retained Threaded Pivot Head

Secure Attachment of Nut on the Adaptor Plate
(Stainless Steel Cable & Ferrules are also
available for outside applications)
V
V
Z
Sikla 41 Joints
#1556 V
#1557 Z
Z
are used when connecting 41mm Channel
allowing for Variable Angle-Adjustment
ranging from 0˚-180˚. It is suitable for
direct connection to building structures and
in combination with Channel, it can be
used as an Angular Support for Bracketry.
Nominal Load:
Fq = 2.0KN per juncture
Tightening Torgue: 50 Nm
Material:
Steel S235 JR with HCP
surface
Page 34
SEISMIC PRODUCTS MEETING BUILDING CODE 4219
Please note: Structural Engineers will need to authorise these products,
it is the installers responsibility to use fit for purpose product for the application.
Specifications/Data Sheets can be supplied on request
Powers Seismic-Approved Fixings IBC2012
As per ACI 355.2 Prescribed Qualification Tests for Seismic
#1569 Powers Seismic Vertigo Plus Concrete Rod Hanger Anchor—M10 x 54mm (3/8‖ x 2 1/8‖)
Zinc Plated Carbon Steel (Yellow Dichromate Finish)
For Cracked & Uncracked Concrete (Code Listed ICC-ES-ESR-2272, Category 1)
Simple system for all Rod-Hanging Applications in Concrete, Ease/Speed of Installation/Attachment,
Can be Installed with a Torque Impact Driver
Applications & Uses: Great for Hanging Pipe & Sprinkler Systems, Suspended Ceilings, Suspending Conduit/Cable
Trays, Lighting Systems & Overhead Utilities, HVAC Ductwork & Strut/Channel
Suitable Base Materials: Normal-weight Concrete, Structural & Lightweight Concrete, Concrete over Steel Deck
Use Koken Impact Socket with Powers Seismic Vertigo Plus Anchor
#1578 Koken 1/2 DR Impact Socket—18mm
#1580 Powers Seismic Wedge-Bolt Plus—1/4‖ x 1 3/4‖ (M6 x 43mm) - Zinc Plated
#1580B Powers Seismic Wedge-Bolt Plus SDS 1/4‖ Drillbit for #1580
#1592 Powers Seismic Wedge-Bolt Plus—3/8 x 3‖ (M10 x 75mm) - Zinc Plated
#1592B Powers Seismic Wedge-Bolt Plus SDS 3/8‖ Drillbit for #1592
One Piece, Heavy Duty Screw Anchor with Finished Hex Head (Carbon Steel)
Consistent Performance in High & Low Strength Concrete, Can be Installed through Standard Fixture Holes,
Wedge Bit size is match to Nominal Anchor diameter, Fast Installation with Powered Impact Wrench
Applications & Uses: Great for Racking, Shelving, Support Ledges, Seismic & Wind Loading, Fencing & Railing, Retrofits,
Repairs & Maintenance, Interior Applications/Low Level Corrosion Environments
Suitable Base Materials: Normal-weight Concrete, Structural Sand - Light-weight Concrete, Concrete over Steel Deck
Grout filled Concrete Masonry (CMU), Solid Clay Brick
#1581 Powers Seismic Power-Bolt Plus (PB+) —1/2‖ x 2 3/4‖ (M12 x 69mm)
#1582 Powers Seismic Power-Bolt Plus (PB+) —1/2‖ x 3 3/4‖ (M12 x 94mm)
Zinc Plated Carbon Steel Bolt, Washer, Cone Sleeve & Expansion Clip
(Assembled with Plastic Compression Ring & Retainer Clip)
Torque Controlled Heavy Duty Sleeve Anchor
Consistent Performance in High & Low Strength Concrete, Nominal Drill Bit size is the same as Anchor diameter, Anchor Design
allows for Follow-Up Expansion after setting under Tensile Loading, Higher Shear Load Capacity
Applications & Uses: Structural Connectors—Beam & Column Anchorage, Safety Related Attachments &
Tension Zone Applications, Interior Applications/ Low Level Corrosion Environments, Heavy Duty Applications
Suitable Base Materials: Normal-weight Concrete, Structural Sand - Light-weight Concrete
#1591 Powers Seismic PBT Through-Bolt —M10 x 90mm—Zinc Plated
Heavy Duty, One Piece Torque Controlled Anchor
Powers Through-Bolt PTB-ETA1-PRO is Designed and Approved for use under Seismic Loading Anchor Performance
Category C1 & C2 in accordance with EOTA TR45 recommendations.
POWERS High-Performance THROUGH-BOLT features a Strong 3-Piece Expander Sleeve for Efficient High
Slip-Load Performance. This Design provides Easy Torque Setting with Minimal Effort—Even in Porr Base Materials.
Applications & Uses: Approved for Cracked & Uncracked Concrete
#1645 Powers Seismic Power-Stud Plus SD2—3/8‖ x 3 1/2‖ ***Imperial Sizing***
Zinc Plated Carbon Steel Body with Stainless Steel Expansion Clip
For Cracked & Uncracked Concrete (Code Listed ICC-ES-ESR-2502, Category 1)
Fully Threaded, Torque Controlled, Wedge Expansion Anchor
Applications & Uses: Ideal for Structural Connections like Beam & Column anchorage, Seismic & Wind Loading, Tension
Zone Applications—Cable Trays, Strut, Pipe Supports, Fire Sprinklers, Medium to heavy Duty Purposes
Consistent Performance in High & Low Strength Concrete, Nominal Drillbit Size is the same as Anchor diameter, Can be
Installed through Standard Fixture Holes & Allows for Follow-up Expansion after Setting under Tensile Loading.
Suitable Base Materials: Normal-weight Concrete, Structural Sand - Lightweight Concrete, Concrete over Steel Deck &
Grout filled Concrete Masonry (CMU)
Page 35
_______________ ANCHORING SYSTEMS
The following Fastening Options are used for Suspending or Bracing and are quick, convenient and user friendly methods
system when installing service applications like Roof Suspension Systems, Panels for Cold Rooms, HVAC, Hanging
Mechanical Services, Electrical Services, Installing Cable Trays, Channel, Catenary & Seismic Bracing.
Part#
Product Description
Sold As
Pkt Qty
1390
Dog Leg Anchor, Pipe Head—6.5mm x 45mm
Zinc Plated
Each
100
1501
Zinc Plated
Each
100
1504
Threaded Rod Suspension Anchor—M6 x 60mm
Zinc (Yellow)
Each
50
Zinc (Yellow)
Box/100
100
(Drill Size 6mm, Fasten M10 Rod)
1101
Component Set—M12, 3 Piece Set
1202
1262
Duct Nut, Hex Head—M8 (also called a Duct Hanger Bolt)
Zinc Plated
Zinc Plated
Each
Each
100
100
1201
Sikla Universal Joint, 3 Piece—M10 (800kg Capacity)
Zinc Plated
Each
50
1204
Buzz Nut, M10
Zinc Plated
Each
100
1023
1024
1025
1568
1026
1027
1028
1029
Powers Vertigo, M10 Concrete, 38mm
Powers Vertigo, M10 Steel with Nut, 25mm
Powers Vertigo, M10 Side Hanger Steel with Nut, 25mm
Powers Vertigo, M10 Side Hanger Timber, 50mm
Powers Vertigo, M10 Timber, 50mm
Socket Driver for M10 Concrete—Blue
Socket Driver for M10 Steel & Timber—Red
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
Each
Each
Each
Each
Each
100
100
100
100
100
100
5
5
Powers Seismic Vertigo Plus Concrete Anchor, M10 x 54mm Zinc Yellow
Koken Impact 1/2DR Socket—18mm Use with above #1569
Powers Seismic Wedge-Bolt Plus, M6 x 43mm (1/4‖ x1 3/4‖) Zinc Plated
Powers Seismic Wedge-Bolt Plus SDS Drillbit 1/4‖
Powers Seismic Wedge-Bolt Plus, M10 x 75mm (3/8‖ x 3‖)
Zinc Plated
Powers Seismic Power-Bolt Plus, M12 x 69mm (1/2‖ x 2 3/4‖) Zinc Plated
Powers Seismic PBT Through-Bolt Anchor, M10 x 90mm
Zinc Plated
Powers Seismic Power-Stud Plus SD2, 3/8‖ x 3 1/2‖
Zinc Plated
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
50
1623 Safety Seismic Stud Anchor, HST Concrete M10 x 90mm
Zinc Plated
1623S Safety Seismic Stud Anchor, HST-R M10 x 90mm
Stainless Steel
Each
Each
50
50
1569
1578
1580
1580B
1592
1592B
1581
1582
1591
1645
100
100
100
100
50
100
1519
Sammy Fastener, M10 Concrete, 45mm
Zinc Plated
Each
100
1264
M8 & M10 Hilti Concrete Fastener, 35mm *140kg Capacity
Zinc Plated
Carbon Steel Concrete Screw with a M8 & M10 Internal Thread
Each
100
M8 Threaded Rod, 2M
M8 Threaded Rod, 1M
M10 Threaded Rod, 2M
M10 Threaded Rod Nylon Protection Cap-Grey
Zinc Plated
Galvanised
Zinc Plated
Galvanised
Zinc Plated
Galvanised
Each
Each
Each
Each
Each
Each
Each
Bdl/25
Bdl/25
Bdl/25
Bdl/25
Pkt/1000
Bdl/20
Bdl/20
1020
1021
1022
M8 Threaded Rod Coupler
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
100
100
100
1257
1041
1042
1157
M8 Base Plate
M10 Base Plate
M12 Base Plate
M10 Base Plate—**45 Degree Angle**
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
Each
100
100
100
100
1630
Rod Stiffener SC228 Hanger
Zinc Plated
Each
100
1209
Retrofit Bracket ***Ideal for Seismic Applications
PreGalvanised
Each
100
1017
1017G
1018
1018G
1018C
1019
1019G
1112 Seismic Fixing Bracket
PreGalvanised
Each
1112G
Fixing Bracket
Hot Dipped
GalvanisedFLANGE
Each
HVACSeismic
Hardware
_ ___________________
AIRCON
100
100
PERFORMANCE
Page 36
_____________ ANCHORING SYSTEMS
Part#
Product Description
1620
1460
Zip-Clip FAZ II Seismic Ceiling Anchor (240kg Load)
1117
Tie Down Screwbolt—M12 x 100mm
1391
Sold As
Pkt Qty
Zinc Plated
Each
Each
50
50
Zinc (Yellow)
Each
25
Zinc Plated
Each
100
1394
Eye Screw—M10
Zinc Plated
Each
100
1544
Zinc (Yelllow)
Each
100
1393
Zinc (Yellow)
Each
100
1392
Zinc (Yellow)
Each
100
1395
Zinc Plated
Each
100
1438
1439
Zinc Plated
Galvanised
Each
Each
25
25
1502
1503
Galvanised
Galvanised
Each
Each
25
25
1504
Zinc (Yellow)
Each
50
1229
Zinc (Yellow)
Each
100
Hollow Wall Anchor—M4 x 40mm (10-16mm Wall Thickness)
Hollow Wall Anchor Setting Tool—PLIER Type (A)
Hollow Wall Anchor Setting Tool—PISTOL Type (B)
Powers Vertigo Wall-Dog Anchor—6.5mm x 32mm
Zinc Plated
Powers Vertigo Wall-Dog Anchor—6.5mm x 32mm
Galvanised
Each
Each
Each
Each
Each
100
1478
1009
1215
Nylon Nail In Anchor—5mm x 25mm (Round Head)
Metal Pin Anchor—5mm x 22mm
(Mushroom Head)
Metal Pin Anchor—6.5mm x 32mm (Mushroom Head)
Zinc Plated
Zinc Plated
Each
Each
Each
100
100
100
1569
1578
1623
Powers Seismic Vertigo Plus Concrete Anchor, M10 x 54mm— Zinc
Powers Seismic PBT Through-Bolt Anchor, M10 x 90mm Zinc Plated
Each
Each
Each
50
1102
1165
1103
1052
1052T
Drop In Anchor, Lipped—M10 x 30mm
Zinc (Yellow)
Drop In Anchor—M10 x 40mm
Zinc (Yellow)
Drop In Anchor Wedge Tool
Powers Hollow Set Drop In Anchor—M10 (Internally Threaded Expansion
Powers Hollow Set Setting Tool, 10mm
Box/50
Box/50
Each
Each
Each
50
50
1428
1368
1369
1495
1495G
1098 Sleeve Anchors—M8 x 40mm
1098G Sleeve Anchors—M8 x 40mm
HVAC
Hardware _ ___________________
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
AIRCON
Galvanised
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
FLANGE
Each
A
100
100
B
50
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
PERFORMANCE
50
Page 37
______HVAC INSTALLATION
PIPE INSTALLATION
__________CHANNEL & ROD MOUNT CLIPS
Tool-less Pipe Support Clip that Snaps into Channel or Threaded Rod
Cooper B-Line Kwik-Clip Mounting Clips are a one-piece that snaps into Channel or onto
Threaded Rod at any location which greatly reduces installation time to support piping.
The clips can be be used with insulation to help maintain an unbroken barrier seal and help
eliminate pipe sweating.

No Tools required to install

One Piece design greatly reduces installation time

Easily snaps into Channel or Threaded Rod

Non-metallic design eliminates metal-to-metal contact helping prevent galvanic corrosion

Meets UL2043 requirements for plenum rating and UL94 HB flame rating

Working temperature range of -40°F to +275°F
Insert in Channel
Twist into Place
Lay Tubing/Pipe into Clip
All Rod &
Channel Clips
come in Pkt/25
Metric
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
Channel Mount Clip, BPIC062—OD 5/8‖
Channel Mount Clip, BPIC100—OD 1‖
Channel Mount Clip, BPIC112—OD 1 1/8‖
15mm
19mm
22mm
25mm
28mm
32mm
35mm
40mm
42mm
50mm
54mm
1531
1532
1533
1534
1535
1536
1537
1538
Channel Mount Clip, BPSC037—OD 3/8‖
Channel Mount Clip, BPSC112—OD 1 1/8‖
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
Rod Mount Clip, BPRC062—OD 5/8‖
Rod Mount Clip, BPRC100—OD 1‖
Rod Mount Clip, BPRC112—OD 1 1/8‖
Snap Clip Closed
Copper/PEX/CTS/CPVC
1/2‖
5/8‖
3/4‖
Sold As
2‖
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
10mm
12mm
15mm
19mm
22mm
28mm
35mm
42mm
1/4‖
3/8‖
1/2‖
5/8‖
3/4‖
1‖
1 1/4‖
1 1/2‖
Each
Each
Each
Each
Each
Each
Each
Each
15mm
19mm
22mm
25mm
28mm
32mm
35mm
40mm
42mm
50mm
54mm
1/2‖
5/8‖
3/4‖
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
1‖
1 1/4‖
1 1/2‖
1‖
1 1/4‖
1 1/2‖
2‖
Page 38
HVAC INSTALLATION
SIKLA DUCT & PIPE INSTALLATION

Sikla Channel is a lighter duty option for Air Movement instead of the more
costlier & over-specified normal Channel/Strut

For Product Specifications,
Technical Data etc, visit
www.sikla.co.uk
Sikla Duct System is a much more Efficient, Fast and Secure Assembly System with built-in Safety Features to hang Air
Conditioning Square, Rectangular or Round Ducting than the usual Strut/Channel and Fittings. The range is Compact, Quick
and Easy to use when installing with Channel Nuts that pivot and automatically lock into the profile so that they can’t fall out,
then it can easily be adjusted by tightening the nut.
The Moulded 3D-corrugated edges/sides on most of the Channel guarantee a high degree of Stability and Torsional Stiffness.
Strut/Channel Speed Nut is useful for Installation in Vertical Channels or in places of Difficult Access.
*
No getting stuck on Bolt-heads when Sliding in Channel & No Appearance of Settlement after Tightening
After Inserting Speed Nut into Channel Opening, exert slight Axial Pressure causing the Nut to Turn Right, Engaging,
Then Tighten Part to be Connected (No Tools needed for Installation/De-Installation)
Configuration: With Adaptor
Plate & Locking Nut
Installation: Screw the Grub Screw completely into the Pivot Head (Visual Control).
Fix the Adjusted Angle by Tightening the supplied Nut against the Adaptor Plate.
Sikla Universal Joint is used for attaching Non-Horizontal components which may be fixed
directly to Building Surfaces, Beam Clamps, Channels etc. Typical applications would include easy On-Site manufacture
of various Rod Assemblies to Support Brackets, Reinforcement Struts for Sliding and Fixed Point Application.
*
*
*
*
Length & Height Adjustment via Rotation of the Grub Screw in the Threaded Pivot Head
Infinitely Variable Angle Adjustment Length
Securely Retained Threaded Pivot Head
V
Z
Sikla 41 Joint are used when connecting 41mm Channel allowing for
Variable Angle-Adjustment ranging from 0˚-180˚. It is suitable for direct
connection to building structures and in combination with Channel, it can be
used as an Angular Support for Bracketry.
Nominal Load: Fq = 2.0KN per juncture Tightening Torgue: 50 Nm
Right image
show Sikla
Universal Joint
(3 piece) used
Z
V
Sikla Block PBH41 is Quick-Installation for Mounting Pipe Clamps and other components to Channel.
*
It is Time-Saving due to Pre-Assembled Block (replaces 2 individual parts)
*
Due to the fore of the Integrated Spring, Self Supporting if used for Vertical Channels
Part#
Product Description
1440
1441
1442
1223S
Sikla Channel, Slotted
Pregalv 41 x 21 x 1.5mm **6m Length
Pregalv 41 x 21 x 2mm **6m Length
Pregalv 41 x 41 x 2mm **6m Length
Pregalv 41 x 41 x 2.5mm **6m Length
Sold As
Ctn Qty
Each
Each
Each
Each
25
25
25
25
1456
1457
Sikla Speed Nut CC M8 (For Channel with 41mm width) Zinc Plated
Sikla Speed Nut CC M10 (For Channel with 41mm width) Zinc Plated
Each
Each
50
50
1201
Sikla Universal Joint, 3 Piece—UG M10
Zinc Plated
Each
50
1556
1557
1156
Sikla 41 Joint V—Use for Connecting Strut to Strut
Sikla 41 Joint Z—Use for Connecting to Buildings
Sikla Block PHB 41—M10
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
50
50
50
1518
Purlin Clip, M10
Zinc Plated
Each
50
Z
V
DUCT or PIPE CLAMPS –Zinc Plated____________
Part#
Product Description
Diam Size
Material
1467 Duct Clamp with Lining, 100Ǿmm
20x1.8mm
20x1.8mm
20x1.8mm
20x1.8mm
25x1.8mm
25x1.8mm
25x1.8mm
25x1.8mm
25x2.5mm
25x2.5mm
25x2.5mm
1577
Duct
Clamp
with
Lining,
630Ǿmm
25x2.5mm
HVAC Hardware _ ___________________
Load Kg
800
800
800
800
800
800
800
800
1200
1200
1200
1200
AIRCON
Sold As
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
FLANGE
PERFORMANCE
Page 39
____HVAC & MECHANICAL SUPPORT
____________________METAL FRAMING CHANNEL/STRUT

Thickness:

Material: 250MPa (Min yield Stress) mild steel
Part#
2.5mm & 1.6mm
Load Values for Channel should be calculated utilising
Product Description
Sold As
Ctn Qty
1224PG
1223PG
1225S
1225PG
1224P
Channel, Pregalvanised—41 x 41 x 1.6mm, 6M Length
Channel, Pregalvanised—41 x 21 x 2.5mm, 6M Length ***Slotted***
Each
Each
Each
Each
Each
25
25
25
25
25
1223H
1224S
1224H
1226S
1223C
1223ES
Channel, HDG—41 x 41 x 2.5mm, 6M Length
Channel, HDG—41 x 41 x 2.5mm, 6M Length ***Slotted***
Channel, HDG—41 x 41 x 2.5mm, 6M Length ***Back to Back/Combination
Channel Endcap Square (Plastic) Grey
Each
Each
Each
Each
Each
Each
25
25
25
25
100
1223
1224
1225
1226
1227
1228
Springnut, M8—Zinc Plated
Springnut, M8—HDG
Springnut, M10—HDG
Each
Each
Each
Each
Each
Each
100
100
100
100
100
100
1518
Purlin Clip, M10—Zinc Plated
Each
50
1204
Buzz Nut, M10—Zinc Plated
Each
100
1334
1331
1332
Duragal Angle, Pregalvanised—40mm x 40mm x 2.5mm
Each
Each
Each
10
10
10
1337
1162
1203
1545
Cutting Wheel/Disk—100mm x 1.0mm x 16
Each
Each
Each
Each
50
50
50
20
Threaded Rod, M10—Zinc Plated (2M)
Threaded Rod, M10—Galvanised Plated (2M)
Each
Bdl/25
Pallet/1000
Rod Stiffener SC228 Hanger—Zinc Plated
Each
100
1018
1018G
1630
(10mm Metric)
(Secures Channel to Hanger Rod for Vertical Seismic Bracing)
1267
saBesto Zinc Spray—400ml (Excellent for Spot Welds)
Each
12
1544
Tech Screw, Eye Screw Metal Purlin Self Drilling, 14 x 55mm
Zinc Yelllow
Each
100
1569
Powers Seismic Vertigo Plus Concrete Anchor, M10 x 54mm 3/8‖x2 1/8‖
Zinc Yellow
Each
100
1556
1557
Sikla 41 Joint—V (Use for Connecting Strut at any Angle)
Sikla 41 Joint—Z (use for Connecting Strut to Buildings)
Each
Each
50
50
Zinc Plated
Zinc Plated
Buzz Nut Slip-On Lock Nut Washer _
Quick Slip-On Design Allows Washer to Lock into Place Anywhere around Threaded Rod
The BUZZNUT Slip-On Lock Nut Washer can be installed at any desired position on all Threaded Rod, eliminating the need to
thread hex nuts up the entire length of the rod. It slips on easily, allows installers to retro-fit a trapeze without disassembling the
entire existing Support System. The design has been time tested


Combination design reduces on-site material handling
Can be easily removed and adjusted


Replaces jam nuts in high vibratory applications
Load capacities similar to all Threaded Rod
_________________SIKLA 41 JOINING BRACKETS
Sikla 41 Joint are used when connecting 41mm Channel allowing for Variable Angle-Adjustment ranging from 0˚-180˚.
It’s suitable for direct connection to building structures and in combination with Channel, it can be used as an Angular Support
for Bracketry.
Nominal Load: Fq = 2.0KN per juncture
Material: Steel S235 JR with HCP surface
Page 40
_______HVAC INSTALLATION
_ENGINEERING NUTS, BOLTS & WASHERS
Part#
Product Description
Sold As
Pkt/Ctn Qty
1132
1132G
M6 Washer, M6 x 19 x 1.6mm (1/4 x 3/4‖) - Zinc Plated
M6 Washer, M6 x 19 x 3mm (1/4 x 3/4‖) Heavy Steel—Galvanised
Pkt/200
Pkt/100
Pkt/200
Pkt/100
1011
1011G
1268
M8 x 25mm Bolt & Nut—Zinc Plated (Thread goes to top of Bolt)
M8 x 25mm Bolt & Nut—Galvanised (Thread goes to top of Bolt)
M8 x 30mm Bolt & Nut—Zinc Plated (Thread goes to top of Bolt)
Pkt/200
Each
Each
Pkt/200
Pkt/200
Pkt/200
1284
1284G
1216
1216G
1285
1285G
1091S
1506
1506G
1205
1205G
M8 x 20mm Bolt –Zinc Plated (Thread goes to top of Bolt)
M8 x 20mm Bolt –Galvanised (Thread goes to top of Bolt)
M8 x 25mm Bolt—Zinc Plated (Thread goes to top of Bolt)
M8 x 25mm Bolt—Galvanised (Thread goes to top of Bolt)
M8 x 30mm Bolt—Nylon (Hex Head)
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/100
Pkt/75
Pkt/75
Pkt/75
Pkt/75
1105
1105G
1091
M8 Nut, Hex Head—Zinc Plated
M8 Nut, Hex Head—Galvanised
M8 Nut, Hex Head—Nylon
Each
Each
Each
Pkt/200
Pkt/200
Pkt/100
1013
1552
1282G
1164
1297
1297G
1269
M8 Washer, M8 x 16 x 1.6mm Flat Round—Zinc Plated
M8 Washer, M8 x 22 x 3mm Flat Round Heavy Steel Galv—(5/16 x 1‖)
M8 Washer, M8 x 32 x 1.6mm Flat Round Penny—Zinc Plated (5/16 x 1 1/4
M8 Washer, Spring—Zinc Plated
M8 Washer, Spring—HDG
M8 Washer, Starlock 8mm, Plain (For Diecast Quadrants)
Pkt/200
Pkt/200
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Pkt/1000
Pkt/200
Pkt/200
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Pkt/1000
1047B
1047N
M8 x 16mm Flanged Bolt, Hex Head—Zinc Plated
M8 x 16mm Flanged Nut, Hex Head—Zinc Plated
Pkt/100
Pkt/100
Ctn/1500
Ctn/1500
1012
1012G
M10 x 30mm Bolt & Nut, Hex Head—Zinc Plated (Thread goes to top
M10 x 30mm Bolt & Nut, Hex Head—Galvanised (Thread goes to top
Each
Each
Pkt/200
Pkt/200
1286
1286G
1300
1300G
1163
1163G
1090S
1505
1505G
1336
1336G
1507
1507G
1454
1454G
M10 x 20mm Set Screw—Zinc Plated (Thread goes to top of Bolt)
M10 x 20mm Set Screw—Galvanised (Thread goes to top of Bolt)
M10 x 30mm Set Screw—Nylon (Hex Head)
M10 x 35mm Set Screw—Zinc Plated
M10 x 35mm Set Screw—Galvanised
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/100
Pkt/75
Pkt/75
Pkt/75
Pkt/75
Pkt/75
Pkt/75
Pkt/50
Pkt/50
1043
1043G
1340
1541
1090
M10 Nut, Hex Head (16mm AF)-Zinc Plated
M10 Nut, Hex Head, Nyloc—Zinc Plated
M10 Nut, Flanged, Serrated—Zinc Plated
M10 Nut, Hex Head—Nylon
Each
Each
Each
Each
Each
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/100
1014
1014G
1114
1115
1279
1279G
1280
M10 Washer, M10 x 21 x 1.6mm Flat Round—Zinc Plated (3/8 x 1‖ x 16g)
M10 Washer, M10 x 25 x 3mm Flat Round Heavy Steel—Galvanised
M10 Washer, M10 x 32 x 1.6mm Flat Round—Stainless (3/8 x 1 1/4‖ )
M10 Washer, M10 x 32 x 1.6mm Flat Round Penny—Zinc Plate (3/8 x 1 1/4
M10 Washer, 40 x 40 x 3mm Flat Square—HDG
Pkt/200
Pkt/100
Pkt/100
Pkt/100
Each
Each
Each
Pkt/200
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Pkt/50
1259
1259G
M12 x 30mm Bolt & Nut, Hex Head—Galvanised
Each
Each
Pkt/75
Pkt/75
1118
1118G
M12 Nut, Hex Head—Zinc Plated
Each
Each
Pkt/200
Pkt/200
Pkt/100
Pkt/100
Each
Pkt/50
1010
M12 Washer, M12 x 28 x 3mm Flat Round Heavy Steel—Galvanised
Ph
636 5951
Fax 636Spring—Zinc
5956, Email:Plated
sales@airconflange.co.nz, 113 Mays Rd, Onehunga,
Auckland
1298
M12,Washer,
Each
Pkt/100
1295G
M12 Washer, 40 x 40 x 3mm Flat Square—HDG
Page 41
_____________________________________FASTENERS
Component Set (above)
& In Use (below)
Metal Pin
Anchor
Drop In Anchor & Wedge Tool
Powers
Vertigo
Drop In
Anchor
Kit
Nylon Nail In
Anchor
Powers Hollow Set Drop In Anchor
& Setting Tool
Sold As
Pkt Qty
Zinc Yellow
Pkt/100
100
Zinc Plated
Zinc Plated
Each
Each
Each
100
100
100
1101
(To take M10 Threaded Rod, Loading 650kg)
1478
1009
1215
Nylon Nail In Anchor—5 x 25mm, Round Head
Metal Pin Anchor—M5 x 22mm, Mushroom Head **Called MacDrive ***
Metal Pin Anchor—M6.5 x 32mm, Mushroom Head *Called MacDrive***
1102
1165
1103
Drop In Anchor, Lipped —M10 x 30mm (Loading 310kg—Safety Factor 3)
Drop In Anchor —M10 x 40mm (Loading 310kg—Safety Factor 3)
Drop In Wedge Anchor Tool—M10
Zinc Yellow
Zinc Yellow
Pkt/50
Pkt/50
Each
50
50
Powers Hollow Set Drop In Anchor—M10
Powers Hollow Set Setting Tool—10mm
Zinc Plated
Each
Each
100
Powers Vertigo —Drop In Anchor Kit
(500x M10 x 30mm Lipped Drop In Anchors, 2 x Drivers, 1x Tool
Zinc Yellow
Bucket
500
1052
1052T
1265
POWERS VERTIGO—THREADED FASTENING FOR THREADED ROD
Self Drilling Rod Hanging System for Steel, Timber and Concrete

The Powers Vertigo Screws are a base plate and screw in one piece
Part#
Product Description
Sold As Pkt Qty
1023
Powers Vertigo M10 x 38mm Concrete
Zinc Plated
Each
100
1024
Powers Vertigo M10 x 25mm Steel with Nut
Zinc Plated
Each
100
1025
Powers Vertigo M10 x 25mm Side Hanger Steel with Nut
Zinc Plated
Each
100
1026
1027
Powers Vertigo M10 x 50mm Timber
Powers Vertigo M10 x 25mm Timber
Zinc Plated
Zinc Plated
Each
Each
100
100
1568
Powers Vertigo M10 Side Hanger x 50mm Timber
Zinc Plated
Each
100
1028
1029
Socket Driver for Steel & Timber—Red
Each
Each
5
5
50
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
50
50
50
100
Zinc Plated
Each
100
1569
1578
1580
1580B
1592
1592B
1581
1582
1591
1645
1264
Powers Seismic Vertigo Plus Concrete Anchor, M10 x 54mm
Powers Seismic Wedge-Bolt Plus, M10 x 75mm
Powers Seismic Power-Bolt Plus, M12 x 69mm
Powers Seismic PBT Through-Bolt Plus Anchor M10 x 90mm
Powers Seismic Power Stud Plus SD2, 3/8‖ x 3 1/2‖
M8 & M10 Hilti Concrete Fastener—HUS-I6 x 35mm
Zinc Plated
Zinc Plated
Zinc Plated
50
50
Carbon Steel Concrete Screw with a M8 & M10 Internal Thread, 140kg Cap
1202
1262
M8 Duct Nut, Hex Head (Also called Duct Hanger Bolt)
M10 Duct Nut, Hex Head (Also called Duct Hanger Bolt)
Zinc Plated
Zinc Plated
Each
Each
100
100
1519
Sammy M10 x 45mm Concrete Fastener
Zinc Plated
Each
100
Page 42
_______________ ANCHORING SYSTEMS
Part#
Product Description
Sold As
Pkt Qty
1390
Zinc Plated
Each
100
1501
Zinc Plated
Each
100
1504
Zinc (Yellow)
Each
50
Zinc (Yellow)
Box/100
100
1101
1202
1262
Zinc Plated
Zinc Plated
Each
Each
100
100
1201
Zinc Plated
Each
50
1204
Buzz Nut, M10
Zinc Plated
Each
100
1023
1024
1025
1568
1026
1027
1028
1029
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
Each
Each
Each
Each
Each
100
100
100
100
100
100
5
5
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
50
Zinc Plated
Stainless Steel
Each
Each
50
50
1569
1578
1580
1580B
1592
1592B
1581
1582
1591
1645
100
100
100
100
50
100
1519
Zinc Plated
Each
100
1264
Zinc Plated
Each
100
M8 Threaded Rod, 2M
M8 Threaded Rod, 1M
Zinc Plated
Galvanised
Zinc Plated
Galvanised
Zinc Plated
Galvanised
Each
Each
Each
Each
Each
Each
Each
Bdl/25
Bdl/25
Bdl/25
Bdl/25
Pkt/1000
Bdl/20
Bdl/20
1020
1021
1022
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
100
100
100
1257
1041
1042
1157
M8 Base Plate
M10 Base Plate
M12 Base Plate
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
Each
100
100
100
100
1630
Zinc Plated
Each
100
1209
PreGalvanised
Each
100
1017
1017G
1018
1018G
1018C
1019
1019G
PreGalvanised
Each
1112G
Fixing Bracket
Hot Dipped
GalvanisedFLANGE
Each
HVACSeismic
Hardware
_ ___________________
AIRCON
100
100
PERFORMANCE
Page 43
HVAC INSTALLATION
FASTENING/ANCHORING SYSEMS
Part#
Product Description
Sold As
Pkt Qty
1620
Zinc Plated
Each
50
1460
Zinc Plated
Each
50
1390
1391
Zinc Plated
Zinc Plated
Each
Each
100
100
1501
Zinc Plated
Each
100
1394
Eye Screw—M10
Zinc Plated
Each
100
1544
Zinc (Yelllow)
Each
100
1393
Zinc (Yellow)
Each
100
1392
Zinc (Yellow)
Each
100
1395
Zinc Plated
Each
100
1438
1439
Galvanised
Galvanised
Each
Each
25
25
1502
1503
Galvanised
Galvanised
Each
Each
25
25
1504
Zinc (Yellow)
Each
50
1229
Zinc (Yellow)
Each
100
1117
Zinc (Yellow)
Each
25
1202
1262
Duct Nut, Hex Head — M8
Duct Nut, Hex Head—M10
Zinc Plated
Zinc Plated
Each
Each
100
100
1264
Hilti HUS-I6—M8 & M10 Concrete, 35mm
Zinc Plated
Each
100
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
Each
Each
Each
Each
Each
100
100
100
100
100
100
5
5
Powers Seismic Vertigo Plus Concrete Anchor, M10 x 54mm Zinc Plated
Zinc Plated
Powers Seismic Wedge-Bolt Plus, M10 x 75mm
Zinc Plated
Zinc Plated
Zinc Plated
Powers Seismic PBT Through-Bolt Plus Anchor M10 x 90mm Zinc Plated
Powers Seismic Power Stud Plus SD2, 3/8‖ x 3 1/2‖
Zinc Plated
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
50
50
50
50
100
Sammy Rod Fastener—M10 x 45mm Concrete
Each
100
Each
Each
50
50
Each
100
Each
50
1023
1024
1025
1568
1026
1027
1028
1029
1569
1578
1580
1580B
1592
1592B
1581
1582
1591
1645
1519
Powers Vertigo, M10 x 38mm Concrete
Powers Vertigo, M10 x 25mm Steel with Nut
Powers Vertigo, M10 x 25mm Side Hanger Steel with Nut
Powers Vertigo, M10 x 50mm Side Hanger Timber
Powers Vertigo, M10 x 50mm Timber
Powers Vertigo, M10 x 25mm Timber
1623 Thru Bolt HST Safety Stud Concrete Anchor, M10 x 90mm—ZP
1623S Thru Bolt HST-R Safety Stud Anchor, M10 x 90mm—Stainless
1080
Beam Clamp—M10 (Diecast—Threaded)
1201
Universal Joint, 3 Piece—UG M10 (800kg Capacity)
Zinc Plated
50
50
Use with M10 Threaded Rod (as per image to the right
Page 44
__HVAC INSTALLATION
___________SLEEVE ANCHORS—Hex Head
Part#
Sleeve Anchors, sometimes called
Dyn-A-Bolt Fasteners are designed to
be used in solid concrete, brick or
block base material.
They work by inserting them into a
hole drilled into concrete.
Turning the nut pulls the working end
of the Sleeve Anchor up through the
sleeve, expanding and anchoring itself
securely in concrete, brick or block.
1098
1098G
1099
1099G
1100
1100G
1093
1093G
1094
1094G
Drop In Anchors are female concrete
1095
anchors designed for anchoring into
concrete. Drop anchor into pre-drilled 1095G
1096
hole, use setting tool to expand the
anchor into concrete. They are lipped 1096G
to ensure that the Anchor avoids going 1097
1097G
into drilled hole and are internally
threaded and for use with Bolts, Set
1288
Screws or Threaded Rod.
1288G
1291
1291G
1292
1292G
Product Description
Sold As Pkt Qty
Sleeve Anchors—M8 x 40mm
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
WALL-DOG WALL ANCHOR__________________
The Wall-Dog is an all steel, one piece, threaded fastener which is used to fasten various fixtures Directly to Drywall.
Wall-Dog fasteners are Faster than conventional Screw Anchors which require the secondary step of threading a Sheet metal
Screw into the Anchor, the Wall-Dog is installed Directly through the Fixture into the Drywall.
Part#
Product Description
1495 Powers Vertigo Wall-Dog Anchor—6.5mm x 32mm
1495G Powers Vertigo Wall-Dog Anchor—6.5mm x 32mm
Zinc Plated
Galvanised
Sold As
Pkt Qty
Each
Each
100
100
__HOLLOW WALL ANCHOR (also called a Rawl Plug)
Other sizes available on request, POA Part#

Sold As
Pkt Qty
1428
Hollow Wall Anchor—M4 x 40mm
(10-16mm Wall Thickness)
Each
100
1368
1369
Hollow Wall Anchor Tool—Plier Type A
Hollow Wall Anchor Tool—Pistol Type B
Each
Each
-
Great for Installing Heatpump Units
A
Product Description
B
WALL PLUG—NYLON____________________
Part#
1621
1622
Product Description
Wall Plug, Nylon—5 x 25mm
Wall Plug, Nylon—8 x 40mm
Sold As
Pkt Qty
Each
Each
100
100
PLASTERBOARD SCREW—Self Drilling___________

Fast & Easy Installation

Self Drilling point gives Right Size Hole Every time

No Maximum or Minimum Plasterboard Thickness

Fixing can be Easily Removed by simply Unscrewing
Part#
Product Description
1299
Plasterboard Screws—Metal
Sold As
Each
Pkt Qty
100
Page 45
_______THREADED ROD, COUPLERS & BASE PLATES

Used for Hanging Duct

Other finishes and sizes are available, POA
i.e. Galvanised, Stainless, 1M Lengths etc
Part#
Product Description
Sold As
Pkt Qty
1017
1017G
1018
1018G
1018C
1019
1019G
M8 Threaded Rod, 2M—Zinc Plated
M8 Threaded Rod, 1M—Galvanised
M10 Threaded Rod Protection Cap-Grey
Each
Each
Each
Each
Each
Each
Each
Bdl/25
Bdl/25
Bdl/25 or Pallet/1000
Bdl/25 or Pallet/1000
Pkt/1000
Bdl/20
Bdl/20
1020
1021
1021G
1022
M8 Threaded Rod Coupler—Zinc Plated
M10 Threaded Rod Coupler—HDG
Each
Each
Each
Each
100
100
100
100
1257
1041
1042
1157
M8 Base Plate—Zinc Plated
M10 Base Plate—Zinc Plated **45 Degree
Each
Each
Each
Each
100
100
100
100
1394
Eye Screw—M10, Zinc Plated
Each
100
1202
1262
Duct Nut, Hex — M8, Zinc Plated
Duct Nut, Hex — M10, Zinc Plated
(Also called a Duct Hanger Bolt)
Each
Each
100
100
1201
Universal Joint, 3 Piece—UG M10, Zinc Plated
(800kg Capacity)
Use with M10 Threaded Rod (as per image to the right)
Each
50
1630
Hanger, Rod SC228 Stiffener—Zinc Plated
Each
100
THREADED ROD CUTTER___________________
The Threaded Rod Cutter is supplied with a Pre-set, Ready-to-use M10 Cutting Blade.
Other sized and Additional Cutting Blade Sets are also available as an optional extra.

Cuts Threaded Rod with little effort leaving Thread undamaged after cutting,

No Burr Removal required, enabling immediate use of all Thread

Suitable for 6mm, 8mm and 10mm Threaded Rod

Cutting Components made from Heat Treated Alloy Steel for Sharpness and Durability
Part#
Product Description
Sold As
1040
Threaded Rod Cutter
Each
1040B Threaded Rod Cutting Blade/Jaw Set—M10
Set
Page 46
_____________ HVAC INSTALLATION
FASTENERS
_TECH SCREWS for SHEETMETAL—Hex Head, Self Drilling
Tech Screws ( known as Self-Drilling Fasteners) drill and tap into heavy gauge applications quickly & securely.
The forged drill point combined with special threads eliminates the need for centre punching or pre-drilling holes.
Part#
Sold As
Pkt/Ctn Qty
Tech Screws, Hex Head—#8 x 1/2‖ Zinc Plated
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pail/10000
Pail/10000
Pail/10000
Pail/6000
308209 Tech Screws, Pan Socket—#8 x 1/2‖ Zinc Plated
1370 Driver Bit, Square #No.2 –75mm
1370L Driver Bit, Square #No.2 –100mm
Pkt/1000
Each
Each
Pail/10000
10
10
Each
Each
Each
12
12
12
309600
308193
308195
308197
Product Description
308199 Chuck Driver, Magnetic, Hex Head 1/4‖ (for #8 Techs)
308201 Chuck Driver, Magnetic, Hex Head 5/16‖(for #10 Techs)
307540 Chuck Driver, Magnetic, Hex Head 3/8‖
TECH SCREWS for WOOD & METAL—Hex Head, Galvanised
Part#
1143
1144
1145
1685
1146
1389
1624
1625
1564
1147
1147N
1148
1089
1089N
1149
1542
1150
1543
1544
Product Description
Sold As
Ctn Qty
Tech Screws, Hex Head, Wood—12 x 25mm, Galvanised
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/100
Pkt/100
Pkt/100
Pkt/100
1000
1000
1000
1000
1000
1000
1000
1000
1000
Tech Screws, Hex Head, Metal—10 x 16mm, Galvanised
Tech Screws, Hex Head, Metal—10 x 16mm with Neo, Galvanised
Tech Screws, Hex Head, Metal—12 x 25mm with Neo, Galvanised
Tech Screws, Eye Screw Metal Purlin—14 x 55mm, Zinc Yelllow
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/100
Each
1000
1000
1000
1000
1000
1000
1000
1000
1000
100
Tech Screws can
also be supplied
with Neo, POA
_____________________COACH SCREWS—Galvanised
Part#
1312
1313
1314
1281
1315
1287
1296
Product Description
Coach Screws, Hex Head—M8 x 40mm
Sold As
Pkt Qty
Each
Each
Each
Each
Each
Each
Each
100
100
100
100
100
100
100
SURE FIX SCREWS—SELF DRILLING—ZINC PLATED____
Part#
1151
1152
1153
1154
1155
1370
1370L
Product Description
Square Drive, Countersunk—8 x 3/4‖
Square Drive, Countersunk—8 x 1‖
Square Drive, Countersunk—8 x 1 1/4‖
Driver Bit, Square #No.2 –75mm
Driver Bit, Square #No.2 –100mm
Sold As
Ctn Qty
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Each
Each
1000
1000
1000
1000
1000
10
10
Page 47
______________ HVAC INSTALLATION
FASTENERS
__________________POP RIVETS & RIVETERS
Blind Pop Rivets are ideal when access to the back of a job/task is not available.
Part#
Product Description
1048
1045
1044
1230
1104
1158
1234
1159
Rivets—73SS 4-2
Rivets—73SS 4-3
Rivets—73SS 4-4
Rivets—73SS 4-6
Rivets—73SS 4-8
Rivets—73SS 6-4
Rivets—73SS 6-6
Rivets—73SS 6-8
1048A
1044A
1230A
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Sold As
Ctn Qty
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/500
Pkt/500
Pkt/1000
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
Pkt/1000
Pkt/1000
Pkt/1000
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
1266
Riveter, Hand— SRC502H
Each
1231
Riveter, Hand—HR-708 (3 JAW)
Each
1232
Riveter, Long Arm—HR-730 (3 JAW)
Each
1233
Riveter, Extendable Reach—HR710H
Each
SRC502H
HR-708
HR-730
HR-710
HR-708 Hand Riveter is a light duty with a capacity is up to 4.8mm (3/16‖) and is made from High-Grade Aluminium
die-cast housing and carbon steel forged and heat treated handle.
HR-730 Long Arm Lever Riveter is an industrial duty with a capacity of up to 6.4mm (1/4‖) for all materials. The Lever
design reduces physical strength for all rivet sizes, Grips are designed for comfort, safety, and utility Length: 540mm
HR-710 Slim Design Manual Hand Riveter for Industrial Use and Hard to Reach Riveting Application. Rivet steering
capacity: up to 6.4mm (1/4 inch) for all materials, Length: (closed) 300mm, (open) 810mm, The Lattice levering system
reduces operator's fatigue
NB: OTHER TYPES OF POP RIVETERS ARE ALSO AVAILABLE, POA
DRILL BITS—Masonry, Double Ended, Jobber & Hammer_
Part#
Product Description
Sold As
Pkt Qty
1356
1357
1539
1344
1345
1346
1358
1359
1347
1360
1361
1348
1461
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
10
10
10
10
10
10
10
10
10
10
10
10
10
1092
1088
1565
Double Ended Drill Bit—1/8‖ #30 (3.2mm) *For 4 Series Rivets
Double Ended Drill Bit—3/16‖#11 (4.9mm) *For 6 Series Rivets
Double Ended Drill Bit
#20 (4.09mm) *For 5 Series Rivets
Pkt/10
Pkt/10
Pkt/10
100
100
1352
1353
1354
1355
Masonry Drill—6mm x 100mm
Masonry Drill—6.5mm x 100mm
Each
Each
Each
Each
10
10
10
10
We stock the most
popular Drill Bits
Sizees for HVAC but
if you require another
size, please ask, POA
1362
Each
10
1562
Each
10
1363
Each
10
1364
Each
10
1563
Each
10
HVAC
Hardware
_ ___________________
AIRCONEach
FLANGE
1365
SDS
Multi-Fit Hammer
Drill—10.00 x 160mm
10 PERFORMANCE
SDS
Multi-Fit
Hammer
Drill—12.00
x 160mm
10
Ph1366
636 5951
, Fax
636 5956,
Email:
sales@airconflange.co.nz,
113 MaysEach
Rd, Onehunga,
Auckland Page 48
_________ DUCT INSTALLATION
_____________DUCT SADDLES & STRAPPING
Use Duct Saddle Strapping to secure Duct Saddles around Flexible Duct, simply slide Strapping into slots
at each end of the Duct Saddle, then secure with 2x Locking Pins.

Stops Extreme Kinking, Eliminates Pinching & Compression of Insulation

Increases & Maximises Airflow

One Size Fits All

Hang Around Flexible Duct in Open Ceilings
Part#
Product Description
Sold As
Pkt/Ctn Qty
1289
Duct Saddle
Each
Pkt/25
Ctn/250
1290
Duct Saddle Strapping—25mm x 30m
Each
10
1039
Locking Pins
Each
100
1108
Each
3
Each
Each
1000
1000
1109 Buckles, Poly —for Blue Strapping
1109W Buckles, Wire—for Blue Strapping (Heavier Duty)
1085
Multi-hole Suspension Band/Strap, Galvanised—0.55 x 25mm x 25m
Each
10
1038
Each
10
DUCT STRAPS, DUCT STRAPPING TOOL_
Nylon Duct Straps are a cost effective way to secure flexible duct to pipes, fittings or outlets.
This method ensures a fast, clean application eliminating the need for clamps, screws or tape.
Part#
308241
308242
308243
305529
1050
1051
1056
1057
Product Description
Duct Strapping Tool
Duct Diam
(< 150mm Diam)
(< 250mm Diam)
(< 350mm Diam)
Sold As
Pkt/Ctn Qty
Each
Each
Each
Each
Pkt/50 Ctn/2000
Pkt/50 Ctn/2000
Pkt/50 Ctn/2000
Each
Each
Each
Each
100
100
100
100
_____________DUCT TAPE & ALUMINIUM FOIL TAPE
Part#
Product Description
1030B PVC Sealing & Joining Tape, 48mm x 30m—Black
1030 PVC Sealing & Joining Tape, 48mm x 30m—White
1037 PVC 4258 PREMIUM Sealing & Joining Tape, 48mm x 30m—Grey
Sold As
Ctn Qty
Each
Each
Each
60
60
36
1033
1212
Each
Each
24
16
1034
1213
HVAC Aluminium Reinforced Foil Tape—48mm x 45m
Each
Each
24
16
Page 49
______________ DUCT INSTALLATION
PLAIN & INSULATED FLEXIBLE DUCTING—PROUDLY NZ MADE

Metalised Sleeve, Polyester Flexible Duct (3-Zero)

Black Inner Core with Metalised Outer Surface Multi-Layered Construction containing High Level Grade Flame
Retardant Water Based Adhesive with Wire is a High Tensile Steel Helix Encapsulated

Thermally Insulated with Polyester Fibre Blanket to achieve Thermal rating of R0.6

(Temperature Range: –10° to 80°C
Part#
Product Description
Sold As
All Flexible Duct fully complies to AS/NZ
Standard Codes AS4254, AS4508 &
AS1503.3 Fire Test & has been Branz
Tested and complies to ISO 9705:1993
1192
1192S
1193
1178
1178S
1179
1179S
1180
1180S
1181
1181S
1182
1182S
1183
1183S
1184
1184S
1194
1194S
Flexible Duct, Plain/Nude - 100mm x 3m
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
1196
1196S
1185
1185S
1186
1186S
1187
1187S
1188
1188S
1189
1189S
1190
1190S
1191
1191S
1198
1198S
Flexible Duct, Insulated RO.6 - 100mm x 3m
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
1119
1120
1121
1122
1123
1124
1141
1053
Joiner, Galvanised—150mm
Each
Each
Each
Each
Each
Each
Each
Each
Part#
Product Description
1030B
1030
1037
PVC Sealing & Joining Tape, 48mm x 30m—Black
PVC Sealing & Joining Tape, 48mm x 30m—White
PVC 4258 PREMIUM Sealing & Joining Tape, 48mm x 30m—Grey
Each
Each
Each
60
60
36
Each
Each
Each
Each
24
16
24
16
1033
1212
1034
1213
For Flexible Duct Requirements of
R1.2, this is made on request, POA
Please Allow 3.-5 Working Days
Leadtime
Joiners are used to join Flexible
Ducting together using PVC or
HVAC Tape.
The Building code states that a
Joiner should be used at every
3m length of Flexible Duct
Sold As
Ctn Qty
Page 50
______________DUCT INSTALLATION
ACOUSTIC INSULATED RATED RO.6 FLEXIBLE DUCTING
Part#
Top Photo shows
the Flexible
Reducer as sold.
Product Description
Sold As
1125
1126
1127
1128
1129
1130
1293
1294
Flexible Duct, Acoustic RO.6—150mm x 3m
Each
Each
Each
Each
Each
Each
Each
Each
1200
Flexible Reducer - 300-100mm x 1m
(Not Fire Rated) Simply Cut to suit your requirement
All Reducers are Handmade so sizes may vary slightly
Each
SEMI-RIGID ALUMINIUM FLEXIBLE DUCTING___
Semi-Rigid Aluminium Flexible Ducting is designed for High Aerodynamic Performance & Durability.
It’s supplied in a Compressed Form, is about 1000mm Long for Easily Transported and Stretched On-Site.

Made from Incombustible, Corrosion Stable
Material

100% Hermetic Seam due to High Quality
Lock Seam

Can be Insulated with 25mm Polyester

Total Thickness: 70 & 100 microns

Temperature Range: –30° to 250°C

Air Velocity: 30m/s Max

Maximum Operating Pressure: 10000 Pa

Minimum Bending Radius: 0.73 x D
Part#
Supplied in a Standard
3M Length but other lengths are
Available on Request, POA
Product Description
Sold As
1081
1166
1167
1168
1169
1170
1171
Aluminium Semi– Rigid Duct—100mm x 3m
Each
Each
Each
Each
Each
Each
Each
1172
1173
1174
1175
1176
1177
Aluminium Semi-Rigid, Insulated Duct—150mm x 3m
Each
Each
Each
Each
Each
Each
Page 51
_________ DUCT INSTALLATION
_______________ DUCT LINER & DUCT WRAP
Duct Wrap or Insulation Blanket (25mm & 50mm) is a lightweight, Flexible, Acoustic and Thermal Insulation made from Thermally
Bonded Polyester with a Fire Resistant Foil Laminate Facing on one side.
QuietStuf Duct Wrap is used for external lining of Air-conditioning Sheetmetal Ductwork and provides Noise Absorption and
Thermal Insulation for the ducting. It also acts as a Moisture Blanket preventing condensation on cold Air Systems that could
otherwise lead to Corrosion and Staining of Ceilings if not Insulated.
Novahush Duct Liner is made from 100% Flame Resistant Polyester. It meets all the Building Codes and is installed within the
Ducting to Reduce Heat Loss & Noise being transferred along the Duct System.
The Black Facing is a universal Duct Liner to the HVAC industry, for use in all types of Air Conditioning Systems ie. Rectangular
Ducting, Silencers, Oval and Round Sheetmetal Ducting.
Part#
1339
1339T
1033
1212
1034
1213
1514
1517
1515
1560
1560S
308239
308239B
Product Description
Sold As
Ctn Qty
Duct Wrap—1200mm Wide x 10m Length (25mm) Foil Face
Duct Wrap—1200mm Wide x 10m Length (50mm) Foil Face
Each
Each
1
1
Reinforced Fire Rated HVAC Alu.Foil Tape—48mm x 50m
Reinforced Fire Rated HVAC Alu.Foil Tape—72mm x 50m
Each
Each
Each
Each
24
16
24
16
Duct Liner, Novahush 2400x1200mm (25mm Insulation)
Each
Each
Each
Each
Each
Each
Pkt
12
12
6
1
1
10
12
THERMOBREAK FOIL INSULATION_______
Thermobreak is a High-performance, closed cell cross-linked
Polyolefin Foam which outperforms rubber, fiberglass and all
non-cross-linked products. As well as being extremely
long-lasting,
Thermobreak is quick, safe to install, has a low environmental
impact.
It is designed for a range of industrial applications but in the HVAC market, it is used as
an Interior or Exterior wrap on Rectangular, Square or Oval Ducting and is an alternative
to Fiberglass & Polyester Ducting.
It’s Labour Saving with a Peel and Stick application option where fibre products
have to be mechanically fixed, edges sealed and taped
Part#
Product Description
1558
1558A
1559
1559A
1033
1212
1034
1213
Sold As
Ctn Qty
Each
Each
Each
Each
Sold by the
Square
Metre
Also
Each
Each
Each
Each
24
16
24
16
Page 52
_____________ DUCT INSTALLATION
________________DUCTING ACCESSORIES—FITTINGS
Y Branch/Splitter & Double Branch Take Off—Poly, Uninsulated

This item isn’t always kept in stock, 1 days notice required

Other sizes available on request

Insulated & Galvanised finish available on request, POA
Part#
Product Description
Sold As
1381
Y Branch—150/150/150mm (Y)
Each
1382
Y1 Branch—200/150/150mm (Y1)
Each
1383
Y2 Branch—200/150/150mm (Y2)
200/200/200mm
200/200/150mm
250/150/150mm
250/200/150mm
250/200/200mm
Each
1384
Y3 Branch—250/250/250mm (Y3)
250/250/200mm
250/200/200mm
300/200/200mm
300/250/200mm
300/250/250mm
Each
1385
Y4 Branch—300/300/300mm (Y4)
300/300/250mm
300/250/250mm
350/250/250mm
350/300/250mm
350/300/300mm
Each
1386
Y5 Branch—350/350/350mm (Y5)
350/300/300mm
400/300/300mm
400/350/300mm
400/350/350mm
Each
1387
Y6 Branch—400/350/300mm (Y6)
400/400/300mm
400/400/350mm
450/350/300mm
450/350/300mm
450/350/350mm
450/400/300mm
450/400/350mm
450/400/400mm
Each
1388
Double Branch Take-Off—200/150/150/150mm
Each
REDUCERS—Poly & Flexible

This item isn’t always kept in stock, 1 days notice required, other sizes available on request
Part#
Product Description
Sold As
1396
1397
1398
1399
Reducer—200>150mm
Reducer—250>200mm
Reducer—300>250mm
Reducer—350>300mm
Each
Each
Each
Each
1200
Flexible Reducer—300-100mm x 1m
(Not Fire Rated) Simply Cut to suit your requirement
All Reducers are Handmade so sizes may vary slightly
Each
Top Photo shows the
Flexible Reducer
as sold.
Page 53
__________VENTILATION PRODUCTS
________________________AIR DIFFUSION– ALUMINIUM
One Piece Diffusers (Off-White Only)


One Piece Pressed Aluminium

Powder Coated, Standard Off-White

Removable Core, No Joints, Smooth Airflow

Side Entry Cushion Boxes also available

Please note that other Neck Adaptor sizes are available, allow 1 day lead-time
4 Way
Diffuser
Poly Neck
Adaptor
Part#
Product Description
Overall Size LxW
Neck Size
Sold As
1235
1236
1237
1238
1239
4 Way Diffuser—150 x 150mm
4 Way Diffuser—450 x 450mm Lay-In T Rail
300 x 300mm
375 x 375mm
450 x 450mm
525 x 525mm
598 x 598mm
(145x145mm)
(220x220mm)
(295x295mm)
(370x370mm)
(438x438mm)
Each
Each
Each
Each
1400
1401
Neck Adaptor, Poly—225 x 225mm:150mm
Neck Adaptor, Poly—225 x 225mm;200mm
(also called a Square to Round
or Grille Adaptors)
Each
Each
1402
1403
or Grille Adaptors)
Each
Each
1407
1404
1405
1406
or Grille Adaptors)
Each
Each
Each
Each
1496
1497
1498
1499
1500
or Grille Adaptors)
Each
Each
Each
Each
Each
Eggcrate Grille—Fixed Core & With Filter


Manufactured in high quality Aluminum

Flush Face Finish, Powder Coated Off-White

**595x595mm ―Lay-In‖ T-Rail

Hinged with Quality Removable Filters

Replacement Filters also available on Request
Part#
Product Description
Neck Size
Sold As
1245
1246
1247
1248
1249
Eggcrate Grille—Fixed Core
150 x 150mm
200 x 200mm
300 x 300mm
400 x 400mm
550 x 550mm
Each
Each
Each
Each
Each
1250
1251
1252
Eggcrate Grille—with Filter, Hinged
Eggcrate Grille—with Filter, Hinged
***Eggcrate Grille—with Filter, Hinged
300 x 300mm
350 x 350mm
550 x 550mm
Each
Each
Each
Page 54
__________VENTILATION PRODUCTS
_____________AIR DIFFUSION– ALUMINIUM & PLASTIC
Double Deflection Grille—Wall Diffuser (White Only)

Manufactured in high quality Aluminum Extrusion Profiles

Designed with Nylon Brushers for Efficient, Smooth & Quiet Operation

Deflection Blades (standard 20mm Blade Spacing) are Adjustable Individually
Part#
Product Description
Sold As
1241
1242
1243
1244
Double Deflection Grille—Wall Diffuser, 300 x 100mm
Each
Each
Each
Each
Floor Grille—Metal & Plastic
This item isn’t always kept in
stock, 1 days notice required

Metal is Powder Coated Beige Only

Plastic is available in Cream, Beige & Slate

Adjustable Damper
Part#
Product Description
Neck Size
Sold As
1380
Floor Grille— Metal 300x100mm (Side Flow) 300 x 100mm
Each
1380P
Floor Grille—Plastic 300x100mm (Side Flow) 300 x 100mm
Each
1380B
Floor Grille Boot—300x100;150mm diameter
(comes with Adjustable Damper for 300x100mm Grille)
Each
Cone Ceiling Diffuser—Plastic

Spring Loaded Fixing Clips

Positive Lock Duct Tabs with

Adjustable Screw In Centre Cone
Part#
Product Description
Sold As
1253
1254
1255
1256
Cone Ceiling Diffuser—150mm
Each
Each
Each
Each
1371
Bordo Multi-Function Hole Cutter
(cuts 30-290mm Diameter Holes, 50mm Maximum Depth)
Each
____________________GLOVES—White Poly/Cotton
The Poly/Cotton Knitted Polka Dot Gloves are great when
installing Ceiling/Wall Grilles and Diffusers to keep surfaces
clean and free from fingerprints.
Part#
308237
Product Description
GLOVES—Poly/Cotton Knitted
Sold As
Pair
SPRINGS— Tension Winds___________________________

Part#
1131
Extremely Handy and very Popular for keeping Grilles/Diffusers in place
Product Description
Tension Spring—10mm Outside Diameter x 1mm x 1m
Sold As
Each
Page 55
HVAC & MECHANICAL SUPPORT
DUCTING/CAPPING/TRUNKING
for Heatpump & Air Conditioning Units
Made from uPCV Material which is Water & Sunlight Resistant (Light Beige in Colour)
EZ Ceiling Cap
EZ Joiner
EZ Capping
EZ Flexible Duct
EZ Flat Corner 90˚
Part#
1637
1638
1639
1640
1641
1642
1643
EZ Elbow
Product Description
EZ Wall Cover
Sold As
EZ Wall Cover—75mm
EZ Flat Corner, 90˚—75mm
EZ Elbow—75mm
EZ Joiner—75mm
EZ Capping, 2m long—75mm
EZ Ceiling Cap—75mm
EZ Flexible Duct, 480mm long—75mm
Each
Each
Each
Each
Each
Each
Each
EZ Comes with a
2 Year Warranty
ProPipe Ducting for
100mm Size also
available, POA
Pressure Pipe & Fittings—PVC ___________
Tee 90˚
Reducing
Socket
Reducing Bush
Pipe
Saddle
45˚ Elbow
Double End
Socket
Union
90˚ Elbow
Male Faucet
Socket
Female Valve
Socket
Clear
Tubing
Sold As
1650
1651
1652
PVC Pressure Pipe—15mm x 3.9m
Each
Each
Each
1653
1654
1655
1656
1657
1658
PVC Pressure Pipe Elbow, 90˚ - 15mm
Each
Each
Each
Each
Each
Each
1659
1660
1661
PVC Pressure Pipe Tee, 90˚ - 15mm
Each
Each
Each
1662
1663
1664
PVC Pressure Pipe Double End Socket - 15mm
Each
Each
Each
1665
1666
1667
PVC Pressure Pipe Reducing Socket, 20 x 15mm
Each
Each
Each
1668
1669
1670
PVC Pressure Pipe Reducing Bush, 20 x 15mm
Each
Each
Each
1671
1672
1673
1674
1675
PVC Pressure Pipe Female Faucet Socket, 15mm
PVC Pressure Pipe Male Valve Socket, 15mm
PVC Pressure Pipe Male Valve Socket, 20mm
Each
Each
Each
Each
Each
1676
1677
1678
PVC Pressure Pipe Union—15mm
Each
Each
Each
1679
1680
1681
PVC Pressure Pipe Saddle—15mm
Each
Each
Each
1682
1683
1684
Drain Pipe—16mm x 50m
Tubing, Clear—6mm x 30m
PVC Solvent—250ml
Each
Each
Each
Page 56
___HVAC & MECHANICAL SUPPORT
MOUNTING BRACKETS FOR AIR-CONDITIONING UNITS
Standard Support Brackets

Supplied with associated Fixings & Rubber Mounts
Part#
Product Description
1110
1111
Standard Wall Bracket—PL-18
Standard Wall Bracket—PL-24
B
450mm 390mm
550mm 490mm
Load
Sold As
120 kg
150kg
Pair
Pair
B
Ctn Qty
4
4
A
C
B
A
A
Adjustable Wall Bracket

Part#
1113
Supplied with associated Fixings & Rubber Mounts
Product Description
A
Adjustable Wall Bracket -PSB-24
B
C
Load
550mm 490mm 800mm
150 kg
Sold As Ctn Qty
Each
4
Adjustable Roof Support Brackets

To Install on Roofs or Sloping Surfaces

Bolt, Anti-Vibration Feet, complete with Assembly, Anti-Vibration Rubber Accessories
Part#
1142
A
Product Description
A
Adjustable Roof Support Bracket—R822
Load 120 Kg
B
500
mm
C
Sold As
Ctn Qty
Each
4
250 800
mm mm
B
C
MOUNT—Ground Base/Setting Block_
Setting Block for Air Conditioning & Heatpump Units up to 100kg
Overall Size; 510mm long x 140mm wide
Buy in Pairs
1644
Mount, Ground Base—Grey
Sold As
Each
_______ANTI VIBRATION DAMPERS
Anti-Vibration Dampers are useful for isolating and minimizing vibrations
caused by Air-Conditioners, Generators, Electric Motors and Instruments.
Part
Product Description
1076
1077
Anti-Vibration Dampers—AG35
Anti-Vibration Dampers—AG45
1074
Isolater Pad, Black
Size
20x40mm
30x45mm
Rod Size Kg
M8
M8
30
50
Sold As
Ctn Qty
Set/4
Set/4
40
40
Each
500
Made from natural rubber, each
set has 4 pieces complete
with washers & nuts.
ANTI VIBRATION PAD – Ribbed Neoprene______
Vibra Trol NNP Pad are ideal for Dampening Noise & Vibration in Floor caused by Medium & High Speed
Equipment. The NNP is made of Oil-Resistant Neoprene which has an Alternate Height Ribbed Pattern
to Minimise Slip.
Rated Load is 450lbs/204kg (2.00 kN) and has a Deflection of 1/8‖ (3.1mm), for Greater Deflection use multiple pads in layers.
Typical Uses: Air Conditioning Units, Cooling
Towers, Compressors, Fans, Generators,
Pumps, Piping, Process Equipment,
Transformers etc.
Part#
1554
Product Description
Vibra Trol—NNP Ribbed Neoprene Vibration Pad 3x3‖
Sold As
Each
Page 57
HVAC INSTALLATION

ALL Sikla Products are Pre-galvanized & Slotted

www.sikla.co.uk
*
No getting stuck on Bolt-heads when Sliding in Channel
*
No Appearance of Settlement after Tightening
After Inserting Speed Nut into Channel Opening, exert slight Axial Pressure causing the Nut to Turn Right, Engaging, Then
Tighten Part to be Connected (No Tools needed for Installation/De-Installation)
Configuration: With Adaptor Plate & Locking Nut
Sikla Universal Joint is used for attaching Non-Horizontal components which may be fixed directly to Building Surfaces,
Beam Clamps, Channels etc. Typical applications would include easy On-Site manufacture of various Rod Assemblies
to Support Brackets, Reinforcement Struts for Sliding and Fixed Point Application.
*
*
*
*
Right image show
Sikla Universal
Joint (3 piece)
used with M10
Sikla 41 Joints are used when connecting 41mm Channel allowing for Variable Angle-Adjustment ranging from 0˚-180˚.
It is suitable for direct connection to building structures and in combination with Channel, it can be used as an Angular Support
for Bracketry.
Nominal Load:
Material:
Steel S235 JR with HCP surface
V
Z
V
Z
*
*
(however it can still be easily moved along channel by hand)
Installation: Insert the Block into Channel, turn Holding Bracket 90˚ to the right, the Channel Nut Locks into the
Stop Position, then Tighten Nut or other Connecting Part
Part#
1440
1441
1442
1223S
Product Description
Sold As
Pkt/Ctn Qty
Sikla Channel, Slotted Pregalv 41 x 21 x 1.5mm **6m Length
Sikla Channel, Slotted Pregalv 41 x 21 x 2mm **6m Length
Each
Each
Each
Each
25
25
25
25
1456
1457
Sikla Speed Nut CC M8 (For Channels with 41mm width)
Each
Each
50
50
1201
Sikla Universal Joint, 3 Piece—UG M10 (Zinc Plated)
Each
50
1556
1557
1156
Sikla 41 Joint V—Use for Connecting Strut to Strut etc
Each
Each
Each
50
50
50
Z
V
Page 58
HVAC INSTALLATION
___DUCT & PIPE INSTALLATION
DUCT or PIPE CLAMPS for Spiral/Round Duct—M10 Thread
Part#
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1576
1577
Product Description
Diam Size
Material
100Ǿmm Zinc Plated
125Ǿmm Zinc Plated
150Ǿmm Zinc Plated
200Ǿmm Zinc Plated
250Ǿmm Zinc Plated
300Ǿmm Zinc Plated
355Ǿmm Zinc Plated
400Ǿmm Zinc Plated
450Ǿmm Zinc Plated
500Ǿmm Zinc Plated
560Ǿmm Zinc Plated
630Ǿmm Zinc Plated
20x1.8mm
20x1.8mm
20x1.8mm
20x1.8mm
25x1.8mm
25x1.8mm
25x1.8mm
25x1.8mm
25x2.5mm
25x2.5mm
25x2.5mm
25x2.5mm
Duct Clamp, 150Ǿmm HDG
800
800
800
800
800
800
800
800
1200
1200
1200
1200
Sold As
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Permanent
Load Capacity
Spiral/Round Duct Clamps
(for Outside Applications)
1570
1571
1572
1573
1574
1575
Load kg
(Safety Factor 2.5)
(Safety Factor 2.5)
(Safety Factor 2.5)
(Safety Factor 2.5)
(Safety Factor 2.5)
(Safety Factor 2.5)
25x3.0mm
25x3.0mm
25x3.0mm
40x6.0mm
40x6.0mm
40x6.0mm
0.38kN
0.38kN
0.38kN
1.78kN
1.78kN
1.78kN
Each
Each
Each
Each
Each
Each
Other Sizes
Available, POA
MUNZING RINGS–M10 Boss (120kg Capacity)

Zinc Plated Steel Clamp with Resistance Welded (Closed) Nut

Rubber Lined Munzing Rings are High Performance Dammprofile EPDM lining (Temperature Range from –50˚C to +110˚C)

Rubber Lined Munzing Rings are Resistant to Ageing, Ozone, UV rays, Salt Water, Diluted Acids & Bases
Part
Product Description
To Fit
Grip Range
Sold As
Ctn Qty
1410
1411
1412
1413
1414
1415
1540
Munzing Ring, 2 Piece—Unlined
15NB Arc-Welded Boss
80 NB Arc-Welded Boss
20-24mm
23-27mm
31-36mm
39-44mm
46-52mm
58-64mm
87-95mm
Each
Each
Each
Each
Each
Each
Each
150
150
100
75
50
50
50
1629
1416
1417
1418
1419
1420
1421
1626
1627
1628
Munzing Ring, 2 Piece—Rubber Lined
Copper 15 & 20
Copper 20/15NB/1/2‖
Munzing Ring, 2 Piece—Rubber Lined Copper & Waste 32/25NB/1‖
Munzing Ring, 2 Piece—Rubber Lined Copper & Waste 40/32NB/1 1/4‖
40NB/1 1/2‖
Copper & Waste 50
Copper & Waste 65
Copper & Waste 80
80NB
15-19mm
20-24mm
23-28mm
31-36mm
38-44mm
44-50mm
50-56mm
63-69mm
77-85mm
83-93mm
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
100
100
100
75
50
50
50
50
50
50
_____PIPE SADDLES—Light Gauge (Galvanised Iron)
Pipe Saddles are also available in
Larger Sizes and Other Finishes
eg. HDG, Copper & Chrome
POA
Part#
Product Description
1422
1423
1424
1425
1426
1427
Pipe Saddles—15mm, Plain
Sold As
(Light Duty)
(Light Duty)
(Light Duty)
(Light Duty)
(Light Duty)
(Light Duty)
Each
Each
Each
Each
Each
Each
Page 59
______HVAC INSTALLATION
______________________PIPE INSTALLATION
CHANNEL & ROD MOUNT CLIPS
Tool-less Pipe Support Clip that Snaps
into Channel or Threaded Rod






Insert in Channel
Part
#
All Channel &
Rod Mount Clips
come 25/Pkt
Twist into Place
Product Description
Snap Clip Closed
Metric
Copper/PEX/CT
CPVC Pipe
1/2‖
5/8‖
3/4‖
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
15mm
19mm
22mm
25mm
28mm
32mm
35mm
40mm
42mm
50mm
54mm
1531
1532
1533
1534
1535
1536
1537
1538
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
Sold
As
2‖
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
10mm
12mm
15mm
19mm
22mm
28mm
35mm
42mm
1/4‖
3/8‖
1/2‖
5/8‖
3/4‖
1‖
1 1/4‖
1 1/2‖
Each
Each
Each
Each
Each
Each
Each
Each
15mm
19mm
22mm
25mm
28mm
32mm
35mm
40mm
42mm
50mm
54mm
1/2‖
5/8‖
3/4‖
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
1‖
1 1/4‖
1 1/2‖
1‖
1 1/4‖
1 1/2‖
2‖
Page 60
PASSIVE FIRE PROTECTION—PIPEWORK
PROMASTOP UniCollar is a new generation of Fire Collars designed to protect uPVC, HDPE, PP & other Plastic Pipe which pass
through Fire Rated Elements of Building Construction.
PROMASTOP UniCollar have been Tested and Approved to the relevant criteria of most International Standards
which include AS1530: Part 4, BS 476: Part 20 and has UL Certification for FRL up to 240 minutes.
PROMASTOP UniCollar is intumescent device designed to maintain the integrity of the fire resistant elements
through which various plastic pipes pass. It is suitable for installation in various floors and walls similar to that in
which it has been tested. In the event of a fire, the intumescent material in the PROMASTOP UniCollar rapidly
expands, closing off the plastic pipe or combustible insulation and forming an insulating barrier.
The UniCollar has been tested with many new and existing types of plastic using uPVC as a benchmark.
The UniCollar is packed in individual boxes containing 2250mm length of collar
(or 152 segments), fixing accessories are included. The collar is designed so that it can
be cut and snapped in modules of 15mm. For a guide to the approximate number of
collar sizes per strip, please refer to the table below.
APPLICATION: Plastic Pipe Penetration Seals through Floors & Walls
Video Clips, More Information, Specifications & Test Data available on Request
Outer Diameter
mm
43
50
55
63
69
75
83
90
110
114
125
140
160
200
Outer Diameter
inches
1.25
1.5
-
2
-
2.5
-
3
-
4
-
5
6
-
Segments per Collar
(UL listing if featured)
15
17
18
20
(19)
21
22
24
25
29
30
33
36
40
(42)
49
Approximate number of
Collars per Box
10
8.5
8
7.5
7
6.5
6
6
5
5
4.5
4
3.5
3
Number of Brackets per
Collar for Floor Application
2
2
2
2
2
3
3
3
3
3
4
5
5
5
Collar for Wall Application
2*
2*
2*
2*
2*
3
3
3
3
3
3
5
5
5
* Three Brackets are recommended for Framed Walls if framing is not available to be fixed on
PROMASEAL FlexiWrap is made using Intumescent Technology where it is designed to provide
Fire Resistance where Combustible Insulation is used as a Thermal Lagging/Insulation around Metal
Pipework and Air-Conditioning Units. The Insulation is made of Combustible Material and as such,
when penetrating Fire Resistance elements such as Walls/Floors, it could present a Risk of Fire &
Smoke breaching the Integrity of the System
PROMASEAL FlexiWrap is supplied in Sheet Form—450mm x 880mm x 6mm thick
PROMASEAL FlexiWrap has been successfully Tested & Assessed to AS1530: Part 4, BS 476:
Part 20 for both Walls & Floors, achieving a Fire Resistance Level of up to 120 minutes in both
Wall & Floor Applications.
PROMASEAL AN Acrylic Sealant is an Environmental Friendly, Water Based Acrylic Sealant.
If installed correctly, once cured PROMASEAL AN Acrylic Sealant should not Crack and it can be OVERPAINTED.
It has Good Resistance to Water Characteristics & some Movement Capabilities.
Not Recommended: Exterior Use, in areas where Continuous Water Immersion is likely, in
Wet/Damp/High Humidity areas or for using around Services where High Movement may occur
+/- 15%.
APPLICATION: Typical deflection Head & Control Joint Seals in Drywall Partitions & Wall
Slabs, Electrical Cable/Cable Tray Penetration Seals through Drywall Partitions, Metal Pipe
Penetration Seals through Drywall Partitions & Floor Slabs
1343
1343B
1597
1598
PROMASTOP UniCollar—2250mm long (includes 24 Brackets)
UniCollar Single Brackets (recommended 3 Brackets/Collar)
PROMASEAL AN Acrylic Sealant—White 300ml
PROMASEAL FlexiWrap—Intumescent Wrap 880 x 450 x 6mm Sheet
Sold As
Pkt/Ctn Qty
Each
Each
Each
Each
8
24
12
6
Each
Each
100
50
(it is recommended to use 2x PROMASEAL Acrylic Sealant with every Sheet)
1051 Cable Ties, Black—300mm x 3.6mm
308241 Cable Ties, Natural—610mm
Page 61
_______HVAC INSTALLATION
____________________ROOF-TOP SUPPORTS
DURA-BLOK is made from 100% Recycled Rubber and Qualifies for LEED Credits.
Reflective Strips on both sides allow for Easy Visibility. DURA-BLOK is an Economical Support
for Piping Systems, Cable Tray, HVAC equipment and many other applications.
DURA-BLOK is UV Resistant and suitable for any type of Roofing Material or other Flat Surfaces,
the Material effectively accepts Strut/Channel & Screw Fasteners for Securing Accessories
Channels are through bolted for Added Strength and a 1‖ (25.4mm) gap between Blocks allows
water to flow freely around longer assemblies.
Product composition is not Sharp or Abrasive, helping to extend Roof Life and no Penetration through the Roof is Required.
The DURA-BLOK dampens Vibration, needs no supplemental Rubber Pad and will not Float or Blow Away
DURA-BLOK can be used to support Piping, HVAC/Ducts, Roof Walkways. Conduit & Cable Tray
1553
Load Capacity
Sold As
DURA-BLOK DBP Rooftop Support—Base Only 500lbs/226Kg (2.22kN)
(101 x 152 x 244mm (HxWxL)
Each
CHANNEL/STRUT for Services, HDG______________
Part#
1223H
1224S
1224H
1226S
1223ES
1162
1203
Product Description
Channel, HDG—41 x 41 x 2.5mm , 6M Length
Channel, HDG—41 x 41 x 2.5mm , 6M Length***Slotted
Channel Plastic Endcap, Grey
Sold As
Pkt/Ctn Qty
Each
Each
Each
Each
Each
Each
Each
25
25
25
25
100
50
50
Can be
Sold in 3M
Lengths
Also
__________CHANNEL CLIPS for PIPE—2 Piece, HDG
Part#

Very Popular for mounting pipes directly on
Support with Cantilever Brackets &
Channel,

Channel Clip eliminates the need to use
Spring Nuts

Other sizes are available for Insulated
Pipe/Tubing, POA
1430
1431
1432
1433
1434
1435
1436
1437
Product Description
Sold As
Channel Clip—34mm (OD of the Pipe or ID of the Clip)
Each
Each
Each
Each
Each
Each
Each
Each
Page 62
____CANTILEVER BRACKETS—UNBRACED & BRACED
Part#
Product Description
SWL=2.5
Sold As
Pkt/Ctn Qty
1271
1272
1273
1274
Cantilever Bracket—Unbraced, HDG 300mm
120 kg
160 kg
200 kg
245 kg
Each
Each
Each
Each
10
10
10
10
1276
Cantilever Bracket—Braced, HDG 450mm
(Actual Leg Length 470mm)
230 kg
Each
10
340 kg
Each
10
380 kg
Each
10
Each
100
1277
1278
1223ES Channel End Cap Square (Plastic) Grey
Fits on Channel & Cantilever Arms for Safer & Better Looking Finish
1160
1160T
1160C
Cantilever Bracket Kit—Complete (Timber & Concrete)
Cantilever Bracket Kit—Timber Only
Cantilever Bracket Kit—Concrete Only
Kit
Kit
Kit
Includes: 4x M8 Spring Nut HDG, 4x M8x30 Set Screws HDG, 2x Endcaps &
4x 12x60 Sleeve Anchor HDG (Concrete) OR 4x 12x65 Coach Screws (Timber)
1223
1225
1227
Springnut, M8 —Zinc Plated
Springnut, M12—ZIinc Placed
Each
Each
Each
100
100
100
1224
1226
1228
Springnut, M8 —HDG
Each
Each
Each
100
100
100
1280
Square Washer, M10 40 x 40 x 3mm—HDG
Each
50
1630
Rod Stiffener Hanger SC228—Zinc Plated
Secures Channel to Hanger Rod for Vertical Seismic Bracing
Each
100
1267
Each
12
1337
1162
1203
1545
Each
Each
Each
Each
50
50
50
20
CHANNEL CLIPS for PIPE—2 Piece, HDG _________

Very Popular for mounting pipes directly on Support with Cantilever Brackets & Channel,

Channel Clip eliminates the need to use Spring Nuts

Other sizes are available for Insulated Pipe/Tubing, POA
Part#
1430
1431
1432
1433
1434
1435
1436
1437
Product Description
Sold As
Each
Each
Each
Each
Each
Each
Each
Each
Other Sizes
are
Available
on
Request,
POA
Page 63
____________________METAL FRAMING CHANNEL/STRUT

Thickness:

Material: 250MPa (Min yield Stress) mild steel
Part#
2.5mm & 1.6mm
Load Values for Channel should be calculated utilising
Product Description
Sold As
1224PG
1223PG
1225S
1225PG
1224P
Channel, Pregalvanised—41 x 21 x 2.5mm, 6M Length ***Slotted***
Channel, Pregalvanised—41 x 21 x 2.5mm, 6m Length
1223H
1224S
1224H
1226S
1223C
1223ES
Channel, HDG—41 x 41 x 2.5mm, 6M Length *Back to Back/Combination
Channel Endcap Square (Plastic) Grey
Pkt/Ctn Qty
Each
Each
Each
Each
Each
25
25
25
25
25
$145.00
$185.00
$115.00
$155.00
$399.00
Each
25
25
25
25
100
1223
1224
1225
1226
1227
1228
Springnut, M8—HDG
Each
Each
Each
Each
Each
Each
100
100
100
100
100
100
1518
Purlin Clip, M10—Zinc Plated
Each
50
1204
Buzz Nut, M10—Zinc Plated
Each
100
1334
1331
1332
Each
Each
Each
10
10
10
1337
1162
1203
1545
Each
Each
Each
Each
50
50
50
20
Each
Each
Bdl/25
Pallet/1000
Each
100
1018
1018G
1630
(10mm Metric)
Threaded Rod, M10—2M
Threaded Rod, M10—2M
Zinc Plated
Galvanised
Rod Stiffener SC228 Hanger—Zinc Plated
(Secures Channel to Hanger Rod for Vertical Seismic Bracing)
1267
Each
12
1544
Tech Screw, Self Drilling Eye Screw Metal Purlin—14 x 55mm .
.
Zinc (Yelllow)
Each
100
1569
Powers Seismic Vertigo Plus Concrete Anchor, M10 x 54mm .
.
3/8‖ x 2 1/8‖ Zinc Plated
Each
100
1556
1557
Each
Each
50
50
Zinc Plated
Zinc Plated
Buzz Nut Slip-On Lock Nut Washer _
Quick Slip-On Design Allows Washer to Lock into Place Anywhere around Threaded Rod
The BUZZNUT Slip-On Lock Nut Washer can be installed at any desired position on all Threaded Rod, eliminating the need to
thread hex nuts up the entire length of the rod. It slips on easily, allows installers to retro-fit a trapeze without disassembling the
entire existing Support System. The design has been time tested


Combination design reduces on-site material handling
Can be easily removed and adjusted


Replaces jam nuts in high vibratory applications
Load capacities similar to all Threaded Rod
_________________SIKLA 41 JOINING BRACKETS
Sikla 41 Joint are used when connecting 41mm Channel allowing for Variable Angle-Adjustment ranging from 0˚-180˚.
It’s suitable for direct connection to building structures and in combination with Channel, it can be used as an Angular Support
for Bracketry.
Nominal Load: Fq = 2.0KN per juncture
Material: Steel S235 JR with HCP surface
Page 64
__________________FITTINGS FOR CHANNEL/STRUT
EM1047
EM1026
EM1546
EM4047
EM1067
EM1065
EM1326
EM1325
***Other fittings are available on request,
POA***
EM2785
Part#
EM2072a
Product Description
1301
1302
1303
1477
1304
1306
1307
1309
1310
1311
1316
U-Shaped metal Framing Bracket 41mm—HDG
2 Hole Plate Fitting—HDG
4 Hole Plate Fitting—HDG
45° 2 Hole Metal Framing Angle 76x60mm—HDG
90° 2 Hole Metal Framing Angle 51x48mm—HDG
90° 4 Hole Metal Framing Angle —HDG
90° 3 Hole Metal Framing Angle —HDG
Base Plate, Heavy Duty 100x100mm—HDG
Beam Clamp with Square Plate, U-Bolt & Nuts—HDG
3 Hole U-Shaped Metal Framing Bracket—HDG
Grey Plastic Closure Strip—3m
1556
1557
V
(EM1047)
(EM1065)
(EM1067)
(EM1546)
(EM1026)
(EM1325)
(EM1326)
(EM2072a)
(EM2785)
(EM4047)
(EM1184)
Zinc
Zinc
Sold As
Pkt/Ctn Qty
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
20
20
20
20
100
20
20
20
20
20
20
Each
Each
50
50
Sikla 41 Joints are used when connecting 41mm Channel allowing for
Variable Angle-Adjustment ranging from 0˚-180˚. It is suitable for direct
connection to building structures and in combination with Channel,
it can be used as an Angular Support for Bracketry.
Nominal Load:
Material:
Steel S235 JR with HCP surface
V
Z
Z
Page 65
____________CABLE TRAY & FITTINGS
Cable Tray is 0.75mm Thick, Pregalvanised Finish
Tee Bracket
Hold
Down
Washer
Radius
Plate
Pressing
Please Note
Hot Dipped Galvanised &
Stainless Steel Cable Tray
Are also Available
POA
Cable Tray—Leadtime 1-2 Days
Splice Plate
Hold
Down
Bracket
Link
Plate
Part # Product Description
Height
Sold As
Bdl Qty
1588
1589
1317
1590
1318
Cable Tray, Pregalvanised— 75mm Wide x 3m Long, Rolled Edge
Cable Tray, Pregalvanised—100mm Wide x 3m Long, Rolled Edge
35mm
35mm
35mm
35mm
35mm
Each
Each
Each
Each
Each
24
24
24
24
24
1319
1320
Cable Tray, Pregalvanised—450mm Wide x 3m Long, Straight Edge
Cable Tray, Pregalvanised—600mm Wide x 3m Long, Straight Edge
50mm
50mm
Each
Each
24
24
Please note—50mm High Cable Tray Straight Edge is also available in the
150mm & 300mm wide options, POA
Other Cable Tray Finishes are also available ie. Aluminium & HDG, POA
Page 66
CABLE TRAY FITTINGS—450 & 600mm
Splice Plate EMT3
Radius Pressing Plate EMT3-RPP
Tee Bracket EMT3-TB
Hold Down Bracket EMT3-HDB
Link Plate EMT3-LP
Part#
Product Description
1321
1322
1323
1324
1325
1326
1327
1328
Splice Plate, Pregalvanised
EMT Joining Bolt, Zinc Plated
EMT Joining Nut, Zinc Plated
Hold Down Washer, Pregalvanised
Hold Down Z Bracket, Pregalvanised
Link Plate, Pregalvanised
Radius Plate Pressing, 2400mm, Pregalv
Tee Bracket, Pregalvanised
Hold Down Washer EMT3-HDW
Sold As
(EMT3-SP)
(EMTB)
(EMTN)
(EMTS-HDW)
(EMT3-HDB)
(EMT3-LP)
(EMT3-RPP)
(EMT3-TB)
Each
Each
Each
Each
Each
Each
Each
Each
Page 67
CABLE TRAY Rolled Edge Pregalvanised Fittings
For 75, 100, 150, 200 & 300mm Wide
Horizontal 90˚ Bend
Internal Riser
Equal Tee
External Riser
Horizontal Tee Couple
Adjustable Vertical Elbow
Hanger Bracket
4 Way Cross
Universal Bend Coupler
Adjustable Horizontal Bend 90–180˚
Divider Strip—3m
Locking
Clip
Please Note: All Rolled Edge Cable Tray Fittings are not held in stock,
Please allow 1-2 days delivery, POA
Part#
Product Description
Sold As
1329
1330
Hanger Bracket (for 75mm, 100mm & 150mm Rolled Edge Cable Tray)
Hanger Bracket (for 200mm & 300mm Rolled Edge Cable Tray)
Each
Each
1583
Fast Locking Clip for Rolled Edge Cable Tray—Stainless Steel 316
Each
1584
1585
Bolt, Gutter Bolt M6 x 16mm—Zinc Plated
Nut, Flanged Serrated M6—Zinc Plated
Each
Each
Page 68
HVAC & MECHANICAL SUPPORT
_________________________ROOF-TOP SUPPORTS
1553
DURA-BLOK DBP Rooftop Support—Base Only
101 x 152 x 244mm (HxWxL)
Load Capacity
Sold As
500lbs/226Kg (2.22kN)
Each
Part#
1223H
1224S
1224H
1226S
1223ES
1162
1203
Product Description
Sold As
Pkt/Ctn Qty
Each
Each
Each
Each
Each
Each
Each
25
25
25
25
100
50
50
Can be
Sold in 3M
Lengths
Also
Part#

Channel,

Spring Nuts

Pipe/Tubing, POA
1430
1431
1432
1433
1434
1435
1436
1437
Product Description
Sold As
Each
Each
Each
Each
Each
Each
Each
Each
Page 69
_HVAC SUPPORT - Installation Accessories
Part#
Product Description
Sold As
Pkt Ctn Qty
1017 M8 Threaded Rod, 2M—Zinc Plated
1017G M8 Threaded Rod, 1M—Galvanised
1018 M10 Threaded Rod, 2M—Zinc Plated
Each
Each
Each
1018G
1018C
1019
1019G
M10 Threaded Rod Endcap—Grey (Vinyl)
Each
Each
Each
Each
Bdl/25
Bdl/25
Bdl/25 or
Pallet/1000
Bdl/25
Pkt/1000
Bdl/20
Bdl/20
1020
1021
1021G
1022
M8 Rod Connector (Coupler), Zinc Plated
M10 Rod Connector (Coupler), HDG
Each
Each
Each
Each
Pkt/100
Pkt/100
Pkt/100
Pkt/100
M8 Base Plate, Zinc Plated
M10 Base Plate, Zinc Plated ***45 Degree
Each
Each
Each
Each
Pkt/100
Pkt/100
Pkt/100
Pkt/100
1011 M8 x 25mm Set Screw & Nut, Hex Head, Zinc Plated
1011G M8 x 25mm Set Screw & Nut, Hex Head, Galvanised
Pkt/200
Each
Each
10 Pkt/Ctn
Pkt/200
Pkt/200
1012G M10 x 30mm Set Screw & Nut, Hex Head, Galvanised
Each
Each
Pkt/200
Pkt/200
1047N M8 x 16mm Flanged Nut—Hex (Serrated, No Washer), ZP
1047B M8 x 16mm Flanged Bolt—Hex (Serrated, No Washer), ZP
Pkt/100
Pkt/100
Ctn/1500
Ctn/1500
1257
1041
1042
1157
1284
1284G
1216
1216G
1285
1285G
1506
1506G
1205
1205G
M8 x 20mm Set Screw, Hex Head, Zinc Plated
M8 x 20mm Set Screw, Hex Head, Galvanised
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/75
Pkt/75
Pkt/75
Pkt/75
1286
1286G
1300
1300G
1163
1163G
1505
1505G
1336
1336G
1507
1507G
1454
1454G
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/75
Pkt/75
Pkt/75
Pkt/75
Pkt/75
Pkt/75
Pkt/50
Pkt/50
1259 M12 x 30mm Set Screw, Hex Head, Zinc Plated
1259G M12 x 30mm Set Screw, Hex Head, Galvanised
Each
Each
Pkt/75
Pkt/75
1105 M8 Nuts, Hex Head—Zinc Plated
1105G M8 Nuts, Hex Head—Galvanised
Each
Each
Pkt/200
Pkt/200
M10 Nuts, Hex Head—Zinc Plated
Each
1340 M10 Nuts, Hex Head, Nyloc—Zinc Plated
1541 M10 Nuts, Flanged/Serrated—Zinc Plated
Each
Each
Each
Pkt/200 or
Ctn/2000
Pkt/200
Pkt/200
Pkt/200
1118 M12 Nuts, Hex Head—Zinc Plated
Each
Each
Pkt/200
Pkt/200
1043
Page 70
HVAC SUPPORT - Installation Accessories
Part#
Product Description
Sold As
Pkt/Ctn Qty
1132
1132G
M6 Washer, M6 x 19 x 1.6—Zinc Plated (1/4‖ x 3/4‖)
M6 Washer M6 x 19 x 3 Heavy Steel—Galvanised
Pkt/200
Pkt/100
Pkt/200
Pkt/100
1013
1552
1282G
1164
1297
1297G
1269
M8 Washer, M8 x 22 x 3 Flat Round Heavy Steel—Galvanised
M8 Washer, M8 x 32 x 1.6 Flat Round—Zinc Plated
M8 Washer, Starlock—Plain
Pkt/200
Pkt/200
Pkt/100
Pkt/100
Each
Each
Pkt/1000
Pkt/200
Pkt/200
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Pkt/1000
1014
1014G
1114
1115
1279
1279G
1280
M10 Washer, M10 x 21 x 1.6 Flat Round—Zinc Plated
M10 Washer, M10 x 25 x 3 Flat Round Steel—Galvanised
M10 Washer, M10 x 32 x 1.6 Flat Round—Stainless
M10 Washer, M10 x 32 x 1.6 Penny, Flat Round—Zinc Plated
M10 Washer, 40 x 40 x 3mm, Flat Sqaure—HDG
Pkt/200
Pkt/100
Pkt/100
Pkt/100
Each
Each
Each
Pkt/200
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Pkt/50
1010
1298
1298G
1295G
M12 Washer, M12 x 28 x 3 Flat Round Steel—Galvanised
M12 Washer, 40 x 40 x 3mm, Flat Square—HDG
Pkt/100
Pkt/100
Pkt/100
Each
Pkt/100
Pkt/100
Pkt/100
Pkt/50
Each
Each
Each
Each
Each
Each
each
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Pkt/100
1312
1313
1314
1281
1315
1287
1296
Coach Screws, Timber, Hex Head—M8 x 40mm Galvanised
1143
1144
1145
1685
1146
1389
1624
1625
1564
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/100
Pkt/100
Pkt/100
Pkt/100
1000
1000
1000
1000
1000
1000
1000
1000
1000
1147
1147N
1148
1089
1089N
1149
1542
1150
1543
1544
Tech Screws, Hex Head, Metal with Neo—10 x 16mm, Galvanised
Tech Screws, Hex Head, Metal with Neo—12 x 25mm, Galvanised
Tech Screws, Eye Screw Metal Purlin—14 x 55mm, Zinc Yelllow
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/200
Pkt/100
Pkt/100
1000
1000
1000
1000
1000
1000
1000
1000
1000
100
309600
308193
308195
308197
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pail/10000
Pail/10000
Pail/10000
Pail/6000
308209
1370
1370L
Tech Screws, Pan Socket—#8 x 1/2‖ Zinc Plated
Square Driver Bit, #No.2 –75mm
Pkt/1000
Each
Each
Pail/10000
10
10
308199
308201
307540
Each
Each
Eacg
12
12
12
1151
Square Drive, Countersunk—8 x 3/4‖
1152
1153
1154
1155
1370
HVAC
Hardware _ ___________________
1370L Square Driver Bit, #No.2 –100mm
AIRCON
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Pkt/100
Each
FLANGE
Each
1000
1000
1000
1000
1000
10
PERFORMANCE
10
Page 71
Part#
1048
1045
1044
1230
1104
1158
1234
1159
Product Description
Rivets—73SS 4-2
Rivets—73SS 4-3
Rivets—73SS 4-4
Rivets—73SS 4-6
Rivets—73SS 4-8
Rivets—73SS 6-4
Rivets—73SS 6-6
Rivets—73SS 6-8
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Steel Stem
Sold As
Pkt/Ctn Qty
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/1000
Pkt/500
Pkt/500
Pkt/1000
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
1048A
1044A
1230A
Pkt/1000
Pkt/1000
Pkt/1000
10 Pkt/Ctn
10 Pkt/Ctn
10 Pkt/Ctn
1356
1357
1539
1344
1345
1346
1358
1359
1347
1360
1361
1348
1461
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
10
10
10
10
10
10
10
10
10
10
10
10
10
1092
1088
1565
Double Ended Drill Bit—1/8‖ #30 (3.2mm) For 4 Series Rivets
Double Ended Drill Bit—3/16‖#11 (4.9mm) For 6 Series Rivets
Double Ended Drill Bit
#20 (4.09mm) For 5 Series Rivets
Pkt/10
Pkt/10
Pkt/10
100
100
1352
1353
1354
1355
Each
Each
Each
Each
10
10
10
10
1362
1562
1363
1364
1563
1365
1366
Each
Each
Each
Each
Each
Each
Each
10
10
10
10
10
10
10
HSS Pilot Drill—89mm Short Clam
HSS Pilot Drill—115mm Long Clam
Each
Each
10
10
1586
Euroboor Cutting & Threading Oil—Spray Can—400ml
Each
12
1367
1372
Step Drill (4mm—20mm)
Step Drill (4mm—30mm) Has 2mm increments
Each
Each
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
Holesaw—22mm
Holesaw—25mm
Holesaw—29mm
Holesaw—32mm
Holesaw—35mm
Holesaw—38mm
Holesaw—40mm
Holesaw—41mm
Holesaw—43mm
Holesaw—44mm
Holesaw—45mm
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
1508
1508L
(7/8‖)
(1‖)
(1 1/8‖)
(1 1/4‖)
(1 3/8‖)
(1 1/2‖)
(1 9/16‖)
(1 5/8‖)
(1 11/16‖)
(1 3/4‖)
Other Sizes
are Available
on Request
POA
1373
Wrecking Saw Blade 6‖ x 6TPI
150 x 22mm
Each
10
1374
225 x 22mm
Each
10
1375
305 x 22mm
Each
10
1376
Demolition & Rescue Saw Blade 6‖ x14TPI 152 x 25mm
Each
10
1377
Each
10
1378
Each
10
1492
Hacksaw Blade 300 x 12 x 18TPI‖
Each
10
1493
Each
10
1494
Hacksaw
Blade
300
x
12
x
32TPI‖
Each
HVAC Hardware _ ___________________ AIRCON FLANGE10PERFORMANCE
Page 72
HVAC SUPPORT—Installation
Part#
Product Description
Sold As
Pkt Qty
1390
Zinc Plated
Each
100
1501
Zinc Plated
Each
100
1504
Zinc (Yellow)
Each
50
Zinc (Yellow)
Box/100
100
1101
1202
1262
Zinc Plated
Zinc Plated
Each
Each
100
100
1201
Zinc Plated
Each
50
1204
Buzz Nut, M10
Zinc Plated
Each
100
1023
1024
1025
1568
1026
1027
1028
1029
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
Each
Each
Each
Each
Each
100
100
100
100
100
100
5
5
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
50
Zinc Plated
Stainless Steel
Each
Each
50
50
1569
1578
1580
1580B
1592
1592B
1581
1582
1591
1645
100
100
100
100
50
100
1519
Zinc Plated
Each
100
1264
Zinc Plated
Each
100
M8 Threaded Rod, 2M
M8 Threaded Rod, 1M
Zinc Plated
Galvanised
Zinc Plated
Galvanised
Zinc Plated
Galvanised
Each
Each
Each
Each
Each
Each
Each
Bdl/25
Bdl/25
Bdl/25
Bdl/25
Pkt/1000
Bdl/20
Bdl/20
1020
1021
1022
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
100
100
100
1257
1041
1042
1157
M8 Base Plate
M10 Base Plate
M12 Base Plate
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
Each
100
100
100
100
1630
Zinc Plated
Each
100
1209
PreGalvanised
Each
100
1017
1017G
1018
1018G
1018C
1019
1019G
PreGalvanised
Each
1112G
Fixing Bracket
Hot Dipped
GalvanisedFLANGE
Each
HVACSeismic
Hardware
_ ___________________
AIRCON
100
100
PERFORMANCE
Page 73
HVAC SUPPORT—Installation
Part#
Product Description
Sold As
Pkt Qty
1620
Zinc Plated
Each
50
1460
Zinc Plated
Each
50
1390
1391
Zinc Plated
Zinc Plated
Each
Each
100
100
1501
Zinc Plated
Each
100
1394
Eye Screw—M10
Zinc Plated
Each
100
1544
Zinc (Yelllow)
Each
100
1393
Zinc (Yellow)
Each
100
1392
Zinc (Yellow)
Each
100
1395
Zinc Plated
Each
100
1438
1439
Galvanised
Galvanised
Each
Each
25
25
1502
1503
Galvanised
Galvanised
Each
Each
25
25
1504
Zinc (Yellow)
Each
50
1229
Zinc (Yellow)
Each
100
1117
Zinc (Yellow)
Each
25
1202
1262
Duct Nut, Hex — M8
Duct Nut, Hex Head—M10
Zinc Plated
Zinc Plated
Each
100
1264
Hilti HUS-I6—M8 & M10 Concrete, 35mm 130kg Capacity
Zinc Plated
Each
100
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
Each
Each
Each
Each
Each
100
100
100
100
100
100
5
5
Powers Seismic Vertigo Plus Concrete Anchor, M10 x 54mm
Powers Seismic Wedge-Bolt Plus, M6 x 43mm (1/4‖ x1 3/4‖)
Powers Seismic Power-Bolt Plus, M12 x 69mm (1/2‖ x 2 3/4‖)
Powers Seismic Power-Bolt Plus, M12 x 94mm (1/2‖ x 3 3/4‖)
Zinc Yellow
50
Zinc Plated
Zinc Plated
Zinc Plated
Zinc Plated
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Sammy Rod Fastener—M10 Concrete 45mm
For Vertical Applications
Zinc Plated
Each
100
1623 Thru Bolt HST Safety Stud Concrete Anchor, M10 x 90mm
Zinc Plated
1623S Thru Bolt HST-R Safety Stud Anchor, M10 x 90mm
Stainless Steel
Each
Each
50
50
1023
1024
1025
1568
1026
1027
1028
1029
1569
1578
1580
1580B
1592
1592B
1581
1582
1591
1645
1519
Zinc Plated
Zinc Plated
100
100
100
100
50
100
1080
Beam Clamp—M10 (Diecast—Threaded)
Each
100
1201
Universal Joint, 3 Piece—UG M10
Zinc Plated
(800kg Capacity) Use with M10 Threaded Rod (as per image to the right
Each
50
Page 74
_FASTENING/ANCHORING SYSTEMS
The following Fastening Options are used for Suspending or Bracing and are quick, convenient and user friendly method
system when installing service applications like Roof Suspension Systems, HVAC, Hanging Mechanical Services, Electrical
Services, Installing Cable Trays, Channel, and Catenary.


Part#


Seismic Bracing
Product Description
1428 Hollow Wall Anchor—M4 x 40mm (10-16mm Wall Thickness)
1495 Powers Vertigo Wall-Dog Anchor—6.5mm x 32mm
Zinc Plated
1495G Powers Vertigo Wall-Dog Anchor—6.5mm x 32mm
Galvanised
Sold As
Pkt/Ctn Qty
Each
Each
Each
100
100
100
A
1368
Hollow Wall Anchor Setting Tool—PLIER Type (A)
Each
1369
Hollow Wall Anchor Setting Tool—PISTOL Type (B)
Each
1478
Each
100
1009
1215
Nylon Nail In Anchor—5mm x 25mm (Round Head)
(Other Types of Head ie. Mushroom Head can be ordered, POA)
Metal Pin Anchor—5mm x 22mm (Mushroom Head) Zinc Plated
Metal Pin Anchor—6.5mm x 32mm (Mushroom Head) Zinc Plated
Each
Each
100
100
1620
Each
50
1621
1622
Wall Plugs, Nylon—5 x 25mm
Wall Plugs, Nylon—8 x 40mm
Each
Each
100
100
1299
Plasterboard Self-Drilling Screws
Each
100
1102
1165
1103
Drop In Anchor, Lipped—M10 x 30mm
Drop In Anchor—M10 x 40mm
Pkt/50
Pkt/50
Each
-
1265
POWERS VERTIGO—DROP IN ANCHOR KIT
Kit includes; 500x M10 x 30mm Lipped Drop In Anchors Zinc Yellow
Kit
Kit
Each
Each
100
-
Pkt/100
Pkt/100
Zinc Plated
Zinc (Yellow)
Zinc (Yellow)
B
2x Drivers, 1x Anchor Tool
1052 Powers Hollow Set Drop In Anchor—M10
1052T Powers Hollow Set Setting Tool—10mm
1101
1201
Universal Joint, 3 Piece—UG M10 (800kg Capacity)
Zinc Plated
Use with M10 Threaded Rod (as per image to the right)
Each
50
1623 Thru Bolt HST Safety Stud Concrete Anchor, M10 x 90mm Zinc
1623S Thru Bolt HST-R Safety Stud Anchor, M10 x 90mm
Stainless
Each
Each
50
50
1098
1098G
1099
1099G
1100
1100G
1093
1093G
1094
1094G
1095
1095G
1096
1096G
1097
1097G
1288
1288G
1291
1291G
1292
1292G
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Zinc (Yellow)
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Zinc (Yellow)
Galvanised
Page 75
HVAC INSTALLATION

ALL Sikla Products are Pre-galvanized & Slotted

www.sikla.co.uk
*
No getting stuck on Bolt-heads when Sliding in Channel & No Appearance of Settlement after Tightening
After Inserting Speed Nut into Channel Opening, exert slight Axial Pressure causing the Nut to Turn Right, Engaging,
Then Tighten Part to be Connected (No Tools needed for Installation/De-Installation)
Configuration: With Adaptor
Plate & Locking Nut
Sikla Universal Joint is used for attaching Non-Horizontal components which may be fixed
directly to Building Surfaces, Beam Clamps, Channels etc. Typical applications would include easy On-Site
manufacture of various Rod Assemblies to Support Brackets, Reinforcement Struts for Sliding and Fixed Point
*
*
*
*
Right image show
Sikla Universal
Joint (3 piece)
used with M10
Sikla 41 Joints are used when connecting 41mm Channel allowing for Variable Angle-Adjustment ranging from 0˚-180˚.
It is suitable for direct connection to building structures and in combination with Channel, it can be used as an Angular Support
for Bracketry.
V
Nominal Load:
Z
Z
V
*
*
(however it can still be easily moved along channel by hand)
Installation: Insert the Block into Channel, turn Holding Bracket 90˚ to the right, the Channel Nut Locks into the Stop Position,
then Tighten Nut or other Connecting Part
Sold As
Pkt/Ctn Qty
1440
1441
1442
1223S
Each
Each
Each
Each
25
25
25
25
1456
1457
Each
Each
50
50
1201
Sikla Universal Joint, 3 Piece—UG M10 (Zinc Plated)
Each
50
1556
1557
1156
Sikla 41 Joint V—Use for Connecting Strut to Strut etc
Each
Each
Each
50
50
50
___________CHANNEL CLIPS for PIPE—2 Piece, HDG
Part#
Product Description
Sold As
1430 Channel Clip—34mm (OD of the Pipe or ID of the Clip) Each
Channel Clip eliminates the need to use Spring Nuts 1433 Channel Clip—60mm (OD of the Pipe or ID of the Clip) Each
Other sizes are available for Insulated Pipe/Tubing, 1435 Channel Clip—76mm (OD of the Pipe or ID of the Clip) Each
POA
1437 Channel Clip—115mm
of the PipePERFORMANCE
or ID of the Clip) Each
HVAC Hardware _ ___________________
AIRCON (OD
FLANGE
Very Popular for mounting pipes directly on Support
with Cantilever Brackets & Channel,
Page 76
HVAC INSTALLATION
___DUCT & PIPE INSTALLATION
DUCT or PIPE CLAMPS for Spiral/Round Duct—M10 Thread
Part#
Product Description
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1576
1577
Diam Size
100Ǿmm Zinc Plated
125Ǿmm Zinc Plated
150Ǿmm Zinc Plated
200Ǿmm Zinc Plated
250Ǿmm Zinc Plated
300Ǿmm Zinc Plated
355Ǿmm Zinc Plated
400Ǿmm Zinc Plated
450Ǿmm Zinc Plated
500Ǿmm Zinc Plated
560Ǿmm Zinc Plated
630Ǿmm Zinc Plated
Load Kg
Sold As
20x1.8mm
20x1.8mm
20x1.8mm
20x1.8mm
25x1.8mm
25x1.8mm
25x1.8mm
25x1.8mm
25x2.5mm
25x2.5mm
25x2.5mm
25x2.5mm
800
800
800
800
800
800
800
800
1200
1200
1200
1200
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Permanent Load
Spiral/Round Duct Clamps
(for Outside Applications)
1570
1571
1572
1573
1574
1575
Material
(Safety Factor 2.5)
(Safety Factor 2.5)
(Safety Factor 2.5)
(Safety Factor 2.5)
(Safety Factor 2.5)
(Safety Factor 2.5)
25x3.0mm
25x3.0mm
25x3.0mm
40x6.0mm
40x6.0mm
40x6.0mm
Capacity
0.38kN
0.38kN
0.38kN
1.78kN
1.78kN
1.78kN
Each
Each
Each
Each
Each
Each
MUNZING RINGS–M10 Boss (120kg Capacity)

Zinc Plated Steel Clamp with Resistance Welded (Closed) Nut

Rubber Lined Munzing Rings are High Performance Dammprofile EPDM lining (Temperature Range from –50˚C to +110˚C)

Rubber Lined Munzing Rings are Resistant to Ageing, Ozone, UV Rays, Salt Water, Diluted Acids & Bases
Part
Product Description
To Fit
Grip Range
Sold As
Pkt/Ctn Qty
1410
1411
1412
1413
1414
1415
1540
80 NB Arc-Welded Boss
20-24mm
23-27mm
31-36mm
39-44mm
46-52mm
58-64mm
87-95mm
Each
Each
Each
Each
Each
Each
Each
150
150
100
75
50
50
50
1629
1416
1417
1418
1419
1420
1421
1626
1627
1628
Copper 15 & 20
Munzing Ring, 2 Piece—Rubber Lined Copper & Waste 32/25NB/1‖
Munzing Ring, 2 Piece—Rubber Lined Copper & Waste 40/32NB/1 1/4‖
40NB/1 1/2‖
Copper & Waste 50
Copper & Waste 65
Copper & Waste 80
80NB
15-19mm
20-24mm
23-28mm
31-36mm
38-44mm
44-50mm
50-56mm
63-69mm
77-85mm
83-93mm
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
100
100
100
75
50
50
50
50
50
50
_____PIPE SADDLES—Light Gauge (Galvanised Iron)
Pipe Saddles are also available
in
Larger Sizes and Other Finishes
eg. HDG, Copper & Chrome
Part#
Product Description
1422
1423
1424
1425
1426
1427
Sold As
(Light Duty)
(Light Duty)
(Light Duty)
(Light Duty)
(Light Duty)
(Light Duty)
Each
Each
Each
Each
Each
Each
Page 77
______PIPE INSTALLATION
__________CHANNEL & ROD MOUNT CLIPS
Tool-less Pipe Support Clip that Snaps into Channel or Threaded Rod






Insert in Channel
All Channel &
Rod Mount Clips
come 25/Pkt
Twist into Place
Part
#
Product Description
Metric
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
15mm
19mm
22mm
25mm
28mm
32mm
35mm
40mm
42mm
50mm
54mm
1531
1532
1533
1534
1535
1536
1537
1538
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
Snap Clip Closed
Copper/PEX/CT
CPVC Pipe
1/2‖
5/8‖
3/4‖
Sold As
2‖
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
10mm
12mm
15mm
19mm
22mm
28mm
35mm
42mm
1/4‖
3/8‖
1/2‖
5/8‖
3/4‖
1‖
1 1/4‖
1 1/2‖
Each
Each
Each
Each
Each
Each
Each
Each
15mm
19mm
22mm
25mm
28mm
32mm
35mm
40mm
42mm
50mm
54mm
1/2‖
5/8‖
3/4‖
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
1‖
1 1/4‖
1 1/2‖
1‖
1 1/4‖
1 1/2‖
2‖
Page 78
____PIPE INSTALLATION
PASSIVE FIRE PROTECTION—PIPEWORK
PROMASTOP UniCollar is a new generation of Fire Collars designed to protect uPVC, HDPE, PP & other Plastic Pipe which pass
through Fire Rated Elements of Building Construction.
PROMASTOP UniCollar have been Tested and Approved to the relevant criteria of most International Standards
which include AS1530: Part 4, BS 476: Part 20 and has UL Certification for FRL up to 240 minutes.
PROMASTOP UniCollar is intumescent device designed to maintain the integrity of the fire resistant elements
through which various plastic pipes pass. It is suitable for installation in various floors and walls similar to that in
which it has been tested. In the event of a fire, the intumescent material in the PROMASTOP UniCollar rapidly
expands, closing off the plastic pipe or combustible insulation and forming an insulating barrier.
The UniCollar has been tested with many new and existing types of plastic using uPVC as a benchmark.
The UniCollar is packed in individual boxes containing 2250mm length of collar
(or 152 segments), fixing accessories are included. The collar is designed so that it can
be cut and snapped in modules of 15mm. For a guide to the approximate number of
collar sizes per strip, please refer to the table below.
APPLICATION: Plastic Pipe Penetration Seals through Floors & Walls
Video Clips, More Information, Specifications & Test Data available on Request
Outer Diameter
mm
43
50
55
63
69
75
83
90
110
114
125
140
160
200
Outer Diameter
inches
1.25
1.5
-
2
-
2.5
-
3
-
4
-
5
6
-
Segments per Collar
(UL listing if featured)
15
17
18
20
(19)
21
22
24
25
29
30
33
36
40
(42)
49
Approximate number of
Collars per Box
10
8.5
8
7.5
7
6.5
6
6
5
5
4.5
4
3.5
3
Collar for Floor Application
2
2
2
2
2
3
3
3
3
3
4
5
5
5
Collar for Wall Application
2*
2*
2*
2*
2*
3
3
3
3
3
3
5
5
5
* Three Brackets are recommended for Framed Walls if framing is not available to be fixed on
PROMASEAL FlexiWrap is made using Intumescent Technology where it is designed to provide
Fire Resistance where Combustible Insulation is used as a Thermal Lagging/Insulation around Metal
Pipework and Air-Conditioning Units. The Insulation is made of Combustible Material and as such,
when penetrating Fire Resistance elements such as Walls/Floors, it could present a Risk of Fire &
Smoke breaching the Integrity of the System
PROMASEAL FlexiWrap is supplied in Sheet Form—450mm x 880mm x 6mm thick
PROMASEAL FlexiWrap has been successfully Tested & Assessed to AS1530: Part 4, BS 476:
Part 20 for both Walls & Floors, achieving a Fire Resistance Level of up to 120 minutes in both
Wall & Floor Applications.
PROMASEAL AN Acrylic Sealant is an Environmental Friendly, Water Based Acrylic Sealant.
If installed correctly, once cured PROMASEAL AN Acrylic Sealant should not Crack and it can be OVERPAINTED.
It has Good Resistance to Water Characteristics & some Movement Capabilities.
Not Recommended: Exterior Use, in areas where Continuous Water Immersion is likely, in
Wet/Damp/High Humidity areas or for using around Services where High Movement may occur
+/- 15%.
APPLICATION: Typical deflection Head & Control Joint Seals in Drywall Partitions & Wall
Slabs, Electrical Cable/Cable Tray Penetration Seals through Drywall Partitions, Metal Pipe
Penetration Seals through Drywall Partitions & Floor Slabs
1343
1343B
1597
1598
PROMASTOP UniCollar—2250mm long (includes 24 Brackets)
UniCollar Single Brackets (recommended 3 Brackets/Collar)
PROMASEAL AN Acrylic Sealant—White 300ml
PROMASEAL FlexiWrap—Intumescent Wrap 880 x 450 x 6mm Sheet
Sold As
Pkt/Ctn Qty
Each
Each
Each
Each
8
24
12
6
Each
Each
100
50
(it is recommended to use 2x PROMASEAL Acrylic Sealant with every Sheet)
1051 Cable Ties, Black—300mm x 3.6mm
308241 Cable Ties, Natural—610mm
Page 79
_________PIPE INSTALLATION
___________THERMOBREAK FOIL INSULATION
Thermobreak is a High-performance, closed cell cross-linked Polyolefin Foam which outperforms
rubber, fiberglass and all non-cross-linked products. As well as being extremely long-lasting,
Thermobreak is quick, safe to install, has a low environmental impact.
It is designed for a range of industrial applications but in the HVAC market, it is used as an Interior or
Exterior wrap on Rectangular, Square or Oval Ducting and is an alternative to Fiberglass & Polyester
Ducting.
It’s Labour Saving with a Peel and Stick application option where fibre products have to be
mechanically fixed, edges sealed and taped.
Part#
Product Description
1558
1558A
1559
1559A
1033
1212
1034
1213
Sold As
Ctn Qty
Each
Each
Each
Each
Sold by the
Square
Metre
Also
Each
Each
Each
Each
24
16
24
16
THERMOBREAK TUBE INSULATION for Steel & Copper Pipes
Thermobreak Tube is preformed Tube Insulation for Steel & Copper Pipes, it is made from a
Physically Crosslinked (irradiation) Closed-cell, Polyolefin Foam, Factory Bonded to Reinforced
Aluminium Foil and Backed with a specially developed Acrylic Tissue Interlayer Adhesive System.
With a Lower Thermal Conductivity than any other Flexible Insulation Material, almost Zero Vapour
Permeability along with its all-in-one concept, Thermobreak provides Superior Energy Saving Performance,
Fast & Simple Installation and Trouble-free Operation in numerous Environments.
Thermobreak is GREEN Building Compliant, Certified Green Star Product (VOC), Zero Global Warming Potential (GWP) and
made without Ozone destroying agents such as CFC’s or HCFCs.
Thermobreak Tubing is available in a variety of thicknesses and diametres to suit R-Value requirements.
Great for HVAC Applications, Ducting, Tank Insulation & Pipe Insulation

Best Insulation of any Flexible Insulation Material (0.032 W/mK) @ 23 Deg C

Better Vapour Permeability Resistance than other Flexible Insulation Material 8.19 x 10-15Kg/Pa.s.m)

Non-Fibrous, Anti-microbial (will not allow Bacterial growth)

Cost Effective with Fast Installation with no additional Vapour Barriers or Coatings required

Pre-Slit for Faster Installation

Flexible, Tough & Durable with a wide range of Operating Temperature Range (-80˚C to 100˚C)

Excellent Chemical and Ozone Resistance

Engineering Cell size for Optimum Insulation Performance

Certified to International Fire & Smoke Standards, such as British (BS), ASTM Australian (AS), ISO and UL Standards
Due to the many various thicknesses and diameters of this product, Pricing is Available on
Request once we have ascertained what size & sort of pipe you wish to Insulate
Page 80
_______________PIPE INSTALLATION
DEKTITE—WATERPROOF FLEXIBLE FLASHING SYSTEMS
MINI DEKTITE #0 is ideal for smaller Plumbing and Electrical penetrations, increasing on the job versatility even further.
They’ve been specifically designed for flashing applications such as P.V.C Conduits, Electrical Wiring, Solar Heating or Hot
Water Overflows, Refrigeration Overflows and other small diameter Wall/Roof penetrations including Small-bore Copper Tubing
and Lightning Conductors.

Providing a Perfect Weatherproof and Flexible Seal

Quick & Easy to Install without special tools

Resistant to Ozone & UV Light Damage

Maintenance Free Leak-proof Seal that Flexes with whatever material they’re mounted to.
Larger size Dektites are the essential way to flash and seal pipe penetrations through most roof sheet profiles. Dektites are
designed to enable practically any pipe flashing operation to be completed within minutes.
Dektite protects against leakage on a wide range of pipe or vent projections and is designed to confirm to most roof profiles and
pitch. For a maintenance-free seal on pipes from 0-750mm diameter, it’s more than a flexible solution to pipe flashing.
It’s a means of saving time and money! Dektite Pipe Flashings can also be used to flash square pipes. Just add 30%
to the pipe diameter and trim the cone to suit.
Dektite Combo—Flash Over or Around (A Standard Dektite & Retrofit all in One)
This unique cone design makes the combo range suitable for both Standard and Retrofit
applications. When a Retrofit Dektite is needed, just cut and apply clips (clips included) for
ease of use

Simple to Install without special tools and very Effective


Provides 10-20mm Continuous Contact with Flashed Pipe for a Perfect Weatherproof and Flexible Seal

Clear Markings makes for Easier Cutting to Pipe Size

20 Year Warranty (just fit it and forget it)
For higher temperature applications, a Red Silicone Retrofit Dektite can be supplied which can withstand
constant temperatures at the roofline of –50˚C to 200˚C and up to 250˚C intermittently.
The Red Silicone Retrofit Dektites are a non-stock item which have a 2 day leadtime, POA.
Pipe Sizes are 20-70mm (Base Size 160mm Diameter), 50-185mm (Base Size 273mm Diameter) &
85-255mm (Base Size 369mm)
Part
1058
1059
1060
1061
1007
1062
1063
1064
1408
1065
1579
Product Description
Mini Dektite Pipe Flashing, Black #0
Dektite Combo Pipe Flashing, Black #1
Fits Pipe OD
Base
Pitch
Sold As
0-35mm
5-65mm
45-80mm
5-127mm
75-175mm
108-190mm
125-230mm
150-280mm
175-330mm
254-483mm
400-750mm
100x100mm
139x139mm
177x177mm
221x221mm
285x285mm
366x366mm
366x366mm
454x454mm
454x454mm
705x705mm
995x965mm
0-60˚
0-40˚
0-40˚
0-40˚
0-40˚
0-40˚
0-40˚
0-40˚
0-40˚
0-40˚
0-40˚
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Pkt/Ctn Qty
20
15
15
15
10
10
10
10
5
5
1
EPDM withstands temperatures from –50˚ C—115˚ C & up to 150˚ C intermittently
_____ROOF SEALANT & TECH SCREWS—Self Drilling
BOSTIK Industrial
Grade Clear Silicone
Sealant/Adhesive is
designed for sealing lap
joints in Metal Guttering,
Aluminium Roofing,
Flashings & Down Pipes
Part#
1260
1089
1089N
1147
1147N
Product Description
Bostik Industrial Neutral Cure—Clear, 300ml Silicone
Metal Tech Screws, Hex Head —12 x 25mm Galv
Metal Tech Screws, Hex Head —12 x 25mm Galv with NEO
Metal Tech Screws, Hex Head —10 x 16mm Galvanised
Metal Tech Screws, Hex Head —10 x 16mm Galv with NEO
Sold As
Ctn Qty
Each
20
Pkt/200
Pkt/200
Pkt/200
Pkt/200
1000
1000
1000
1000
Page 81
_______________PIPE INSTALLATION
__________________________DEKTITE SOAKER
The perfect Flashing for all Tray Roofs
The fastest and easiest way to flash on low pitch and deep profile roofs—without risk of damming.
The large base of the Dektite Soaker dramatically reduces rainwater back up on very low or very high roof pitches and deep
ribbed roofing profiles.
Dektites Soakers are ready to flash straight from the pack. They’re faster to flash than old-fashioned methods. Dektite’s
unique corrosion resistant aluminium flange is ideal for low pitch and deep profile roofs, providing a positive leak-proof seal,
without the risk of damming.

Providing a Perfect Weatherproof and Flexible Seal & Quick & Easy to Install without special tools


Maintenance Free Leak-proof Seal that Flexes with whatever material they’re mounted to
Part
Ea
#
1066
1067
1068
Product Description
Dektite Soaker, Grey—DF 603
To fit
Base
Pitch
Pipe mm
mm
114-254
255-410
410-610
485x460
708x635
1006x905
0-60˚
0-60˚
0-60˚
Pipe
Pitch
Sold As
0-40˚
0-40˚
0-40˚
Each
Each
Each
mm
165-255
365-410
370-610
EPDM withstands temperatures from –50˚ C—115˚ C & up to 150˚ C intermittently
___________________________________ROOF SEALANT
BOSTIK Industrial Grade Clear Silicone Sealant/Adhesive is a high performance premium quality neutral cure Silicone
Sealant designed for sealing and adhering to a wide variety of products and surfaces while offering Glazing and
Weather-seal applications. It remains Permanently Flexible and is suitable for both indoor and outdoor Applications.
It cures by absorption of the atmosphere moisture to form a Flexible and Durable Elastomeric sealant. It has a Low Odour
and is Waterproof, unaffected by Rain, Snow, Extreme Temperature Change and Constant UV Exposure.
Ideal for using in lap joints in Metal Guttering, Aluminium Roofing, Flashings, Down Pipes, seals between Glass & Aluminium,
Timber & Glass, Perimeter seals between Aluminium Window Frames, Brick and Masonry, Airseals in Concrete Panels,
Electrical Applications, Marine Work or as a Multi-Purpose Sealant/Adhesive in General Construction & Industrial Maintenance
Part#
1260
Product Description
Bostik Industrial Neutral Cure—Clear, 300ml Silicone Sealant (Plumbers & Roofers)
Sold As
Ctn Qty
Each
20
ROOF TECH SCREWS—Metal Tech
Part#
1089
1089N
1147
1147N
Product Description
Metal Tech Screws, Hex Head —12 x 25mm Galvanised with NEO
Metal Tech Screws, Hex Head —10 x 16mm Galvanised with NEO
Self Drilling
Self Drilling
Self Drilling
Self Drilling
Sold As
Pkt/Ctn Qty
Pkt/200
Pkt/200
Pkt/200
Pkt/200
1000
1000
1000
1000
Page 82
_________PIPE INSTALLATION
_________TOP HAT ROOF PENETRATION KITS
The Top Hat Roof Penetration Kit consists of 4 components that, when installed together create a Roof Penetration System
that gives the best insurance against water leaks. It is the only product of its type on the market and it is the only product that
directly caters for the penetration of HVAC, solar and plumbing pipe work, electrical conduits and cables.
Kit Contains: 1x Rubber Boot Flashing 1x PVC Slotted Pipe
1x PVC Cap (white)
12x Hex Head Tek Screws
1x PVC Flashing Cover (white)
1x 55ml Bostik Silicone
The 4 Main Components are as follows:
Standard Rubber Boot Flashing: The TopHat kit uses a Rubber Boot Flashing which creates a seal between
Roof Cladding and the PVC Tube (which is part of the kit). Silicone sealant is used to assist with creating the
seal between the base of the Boot Flashing and the Roof Cladding. Hex head Screws fasten the base of the
Boot Flashing to the Roof Cladding.
PVC Over Flashing: The moulded PVC Over Flashing protects the seal between the Boot Flashing and the
PVC Tube. A PVC solvent cement connection between the PVC Tube and the PVC Over Flashing stops water
from running down the PVC Tube and sitting on the Boot Flashing-PVC Tube seal. The ―umbrella‖ coverage of
the Over Flashing also protects the top part of the Boot Flashing from U.V rays. The Over Flashing is moulded
to fit the PVC Tube.
PVC Tube: The PVC Tube provides a Mechanically Protective Path and Support for Services from the
Ceiling Space to above the Roof Line. It also ensures that the Boot Flashing seals against a consistent
circumference surface. The slot cut into the top of the PVC Tube enables the Services to be easily bent through
180 degrees without kinking pipe work or drain pipe.
PVC Cap: The PVC Cap connects onto the top of the PVC Tube once the Services have been installed and
routed through the PVC Pipe slot. It is held onto the top of the PVC Tube via a neat fit socket and is ultimately
held into place by a bonded PVC solvent cement connection between the Cap and the PVC Tube. The Cowl of
the Cap means that any Services must follow a path downwards before being able to travel upwards and the
Over Flashing is moulded to fit the PVC Tube.
The fact that the Services must slop downwards before being able to travel upwards is the
Safeguard of the TopHat Penetration Kit that ensures water cannot travel up the Services from
the Roof & into the PVC Tube.
Part
1206
1206M
1206L
1206T
Product Description
Top Hat Roof Penetration Kit—65mm
Top Hat Roof Penetration Kit—Twin 65mm
Sold As
Ctn Qty
Each
Each
Each
Each
4
4
4
4
_______________ROOF SEALANT & FASTENERS

Part#
1260
1089N
BOSTIK Industrial Grade Clear Silicone Sealant/Adhesive is a high performance premium quality neutral cure
Silicone Sealant designed for sealing and adhering to a wide variety of products and surfaces while offering Glazing
and Weather-seal applications. It remains Permanently Flexible and is suitable for both indoor and outdoor
Applications. It cures by absorption of the atmosphere moisture to form a Flexible and Durable Elastomeric sealant.
It has a Low Odour and is Waterproof, unaffected by Rain, Snow, Extreme Temperature Change and Constant UV
Exposure.
Ideal for using in lap joints in Metal Guttering, Aluminium Roofing, Flashings, Down Pipes, seals between Glass
and Aluminium, Timber and Glass, Perimeter seals between Aluminium Window Frames, Brick and Masonry,
Airseals in Concrete Panels, Electrical Applications, Marine Work or as a Multi-Purpose Sealant/Adhesive in General
Construction and Industrial Maintenance Applications
Product Description
Bostik Industrial Neutral Cure—Clear, 300ml Sealant (Plumbers & Roofers)
Tech Screws—Hex Head, Metal 12 x 25mm Galvanised with Neo Washer
Sold As
Each
Pkt/200
Ctn Qty
20
1000
Page 83
PIPE INSTALLATION
_________________________ROOF-TOP SUPPORTS
1553
DURA-BLOK DBP Rooftop Support—Base Only
101 x 152 x 244mm (HxWxL)
Load Capacity
Sold As
500lbs/226Kg (2.22kN)
Each
Part#
1223H
1224S
1224H
1226S
1223ES
1162
1203
Product Description
Sold As
Pkt/Ctn Qty
Each
Each
Each
Each
Each
Each
Each
25
25
25
25
100
50
50
Can be
Sold in 3M
Lengths
Also
Part#

Channel,

Spring Nuts

Pipe/Tubing, POA
1430
1431
1432
1433
1434
1435
1436
1437
Product Description
Sold As
Each
Each
Each
Each
Each
Each
Each
Each
Page 84
______________SUNDRY
DUCT LINER & DUCT INSULATION
___DUCT LINER, Novahush—Polyester




Novahush Duct Liner is made from 100% Flame Resistant Polyester.
It meets all the Building Codes and is installed within the Ducting to
Reduce Heat Loss & Noise being transferred along the Duct System.
The Black Facing is a universal Duct Liner to the HVAC industry, for
use in all types of Air Conditioning Systems ie. Rectangular Ducting,
Silencers, Oval and Round Sheetmetal Ducting.
Bahco Insulation Handsaw (Swedish Made) is Specially developed for Cutting Insulation Material like Fibreglass, Polyester,
Wool, EPS (Expanded Polystyrene, cellular plastic up to 75mm) & XPS (Extruded Polystyrene like Styrofoam up to 75mm).
It has a Resharpable Blade that has a Wave Formed Sharpened
Edge (WT Toothing) that allows it to slice through material creating
Minimal Waste
Part#
Product Description
1514
1517
1515
1560
1560S
308239
308239B
Sold As
Pkt/Ctn Qty
Each
Each
Each
Each
Each
Each
Pkt/10
12
12
6
10
12
DUCT LINER, Thermobreak AcoustiPlus—Hospital Grade**
Thermobreak AcoustiPlus is
a new generation Duct Liner
which is an Open Cell
physically Crosslinked
Polyolefin Foam specially
designed for Hospital use
It has Excellent Acoustic Absorption at Low Thickness
which is Extremely Lightweight, Durable & Erosion Resistant
Part#
TBA
POA


Anti-Microbial to ASTM G21




Fibre Free, PVC free (contains no Biocides)

AS1530 Part 3
Low VOC for Improved Indoor Air Quality
Excellent Ozone & UV Resistance
Operating Temperature; -80˚C to +100˚C (no Adhesive)
BS476 Parts 6 & 7, Class 0 Fire Rated
Ignitability, Spread of Flame, Heat Evolved Index = 0
Smoke Developed Index = 0-1
Product Description
Sold As
Each
Each
Each
Each
CONTACT ADHESIVES—Brush & Spray Applications

Popular for Gluing Insulation to Metal Ducting
Using Sabre Grip S20 (was Tensorgrip) Spray System is a much Faster Application Time, Reducing
Labour costs and is an great alternative to using Ados F2
Part#
Product Description
304159 Bostik 1222 Contact Adhesive—500ml Brush On
304159C Bostik 1222 Contact Adhesive—4L Can Brush On
1549
1549C
1550
Sabre Grip S20 Contact Adhesive—17kg Cannister Spray On (200m Coverage)
Spray Gun & Hose Set
Sold As
Ctn Qty
Each
Each
10
2
Each
Each
Each
12
-
Page 85
__________SUNDRY
___QuietStuf DUCT WRAP (NZ Made)
Duct Wrap or Insulation Blanket (25mm & 50mm) is a lightweight, flexible, Acoustic/Thermal Insulation
manufactured from Thermally Bonded Polyester with a Fire Resistant Foil Laminate Facing on one side.
Duct Wrap is used for external lining of Air-conditioning Ductwork and provides Noise Absorption and
Thermal Insulation for the ducting. It also acts as a Moisture Blanket preventing condensation on cold
Air Systems that could otherwise lead to Corrosion and Staining of Ceilings if not Insulated.
Part#
1339
1339T
1033
1212
1034
1213
Product Description
Sold As
Ctn Qty
Each
Each
1
1
Each
Each
Each
Each
24
16
24
16
THERMOBREAK INSULATION__________
Thermobreak is a High-performance, closed cell cross-linked Polyolefin Foam which
Outperforms Rubber, Fiberglass and all Non-cross-linked products. As well as being
extremely long-lasting, Thermobreak is quick, safe to install, has a low environmental
impact.
It is designed for a range of industrial applications but in the HVAC market, it is used
as an Interior or Exterior wrap on Rectangular, Square or Oval Ducting and is an
alternative to Fiberglass & Polyester Ducting.
It’s Labour Saving with a Peel and Stick application option
where fibre products have to be mechanically fixed, edges
sealed and taped.

Quick, Safe & Easy to Install

Low Environmental Impact

Labour Savings

Out-Performs Rubber, Fibreglass and all non-cross-linked products
Part#
1558
1558A
1559
1559A
Product Description
Sold As
Each
Each
Each
Each
Can be sold
by Square
Metre
Also
_DUCT PROTECTOR—DUST COVER, Clear
More often, Duct Manufacturers are now asked to put a protective cover over the Duct to prevent impurities such as dust, dirt and
rain etc from getting into the newly made Duct while it is at the manufacturers site, in transit or the project site. Once duct has
been installed, simply peel off (this product is like a heavy duty gladwrap with a sticky adhesion just on one side).
Duct Protection Film is made from high strength PE Film and is coated with a unique pattern adhesive system which has excellent
tack and is designed as a temporary protection film that adheres to most surfaces without leaving adhesive residue behind.
EXTRA TOUGH PE FILM:
Film is designed to be
tear & puncture resistant.
Part#
Product Description
1350
1351
Duct Protection/Dust Cover—1000mm x 100m (100 micron)
Duct Protection/Dust Cover— 500mm x 100m (100 micron)
Sold As
Ctn Qty
Each
Each
2
4
Page 86
_________________________SUNDRY
SPRAYS & ADHESIVES
ZINC SPRAY—Long Term Protection & Repair of Metallic Surfaces
Restorative Coating fortified with Zinc, Preventing Rust & Corrosion on Ferrous Metal Surfaces

Zinc-Rich (65% Pure Zinc) Dry Film Spray Formula for Long-lasting Protection

Stops Rust & Corrosion on any Iron or Steel Surface

Restores Galvanised Surfaces to the Bright Look of Hot-Dipped

Sacrifical Anodization cause Zinc to Sacrifice itself to Protect the Base Metal Surface

Zinc Fuses to Metal Substrates for Protection Equal to or Better than Hot Dipped Galvanising
USES: Repair of Welds, Handrails, Rims, Guardrails, Pipes, Corrugated Metal or anything where the look of Hot-Dipped is needed
Part#
Product Description
1267
Sold As
saBesto Galvanising Premium Zinc Spray (400ml)
Excellent for Spot Welds, Good Adhesion on bare Metal
Each
Ctn Qty
12
Not suitable as Adhesive base
for PU, MS-Polymer & Hybrid
Sealing Components
100+ hours of
Salt-Spray Resistant
BLACK PAINT, Lacquer Spray_____________________
High Quality Nitroalkydal Spray Lacquer which may be painted over onto all known Primers, Fillers, Lacquer Types.
Ideal for Heating Elements, Windows, Structural Steel

Indoor & Outdoor Use

Great Coverage

Durable Nitroalkydal

Temperature Stability up to +80˚C
Part#
1046
Product Description
Black Paint—Matt, Lacquer Spray (400ml)
Sold As
Ctn Qty
Each
12
PAINT, Coloured for Construction Sites________
Part#
Fast Drying, Weather Resistant High Quality Pigment
Colour Markings

Good Adhesion on Absorbent, Non-Absorbent &
Slightly Moist Substrates.
308021
308027
Product Description
Paint—Pink (600ml)
Paint—Yellow (600ml)
Sold As
Ctn Qty
Each
Each
12
12
USES: Asphalt, Grass, Soil, Stone, Concrete, Wood, etc for Identification of damages on road and in construction areas.
The spray canister is used upside down, enabling well-aimed clear marking. The line width is made variable depending on
the distance to the ground. Note: Hold the can upright and spray to clean the spray head.
BLACK SILICONE—Neutral Cure_____________________
EVERFLEX Black Silicone is a low modulus, Neutral Cure RTV silicone sealant that has excellent adhesion to most
common surfaces including Glass, Metals, Plastics & Wood with an excellent flexibility of +/- 25%.
It can be used over Water based and Solvent based paints.
Uses: Perimeter Pointing internally/externally around PVCu/Wood & all other Window Frames, Sealing adhesive
onto PVC, Plastic Trims & Components, Bedding Insulated Glass Units, Suitable as an Expansion Joint Sealant,
Weather Sealing/Joint Sealing Pre-formed Panels, Sealing soft Metals as Lead, Copper and Zinc, General Glazing
Sealing/Draughtproofing (including repair work over existing sealant), Glass to Glass and also Glass to Aluminium
Sealing, Parapet & Roof Weather Sealing applications.
***DO NOT USE in conjunction with Bitumen Asphalt, Neoprene, Some Organic Elastomers, in the Manufacture of
Aquariums, on substrates that Bleed Oil, Solvents or Plasticisers, Don’t Overpaint or use as a Mirror Adhesive
Part#
Product Description
1455
Black Silicone, Neutral Cure—300ml

Suitable for Use on Polycarbonate

Indoor & Outdoor Use (Excellent External Weathering Properties

Excellent Adhesion to a wide range of Porous & Non-Porous Surfaces without Priming
Sold As
Ctn Qty
Each
25
Page 87
_________________________SUNDRY
SPRAYS & ADHESIVES
______________EXACT GAP FOAM—Expandafoam
Suitable for Plumbing, Insulating around Door & Window Fames and many other Building Applications

Controlled Application (has application straw

Expands between 5-10%

Sold As
1516 Exact Gap Foam—750ml
Unique Safety Valve-rubber free valve means no clogs or leaks
Ctn Qty
Each
12
SABRE FIX PS CONSTRUCTION ADHESIVE (Liquid Nails)
Sabre Fix PS is a Polystyrene Safe High Strength Construction Adhesive with great Gap Filling properties providing Extra
Bond Strength. It’s Solvent Based Adhesive has Excellent Early Grab properties for use in Vertical & Horizontal Positions.
Uses; bonding Gib Board, Timber Cement Sheets, Particle Board, Concrete, Brick Steel, Ceramic, Aluminium, MDF & other
Construction Based Materials.
Sold As Ctn Qty

Excellent Adhesion/Bond Strength
1210 Sabre Fix PS Construction Adhesive,
Each
20

Exceptional Early Grab Properties
Brown (375ml), Polystyrene Safe

Excellent External Weathering
Quick Drying Early Bond Strength
___________________BOSTIK CONTACT ADHESIVES
Bostik 1222 Contact Adhesive is a general purpose adhesive formulated to give a High Bond Strength & High Heat
Resistance (Temp. Range: –20˚C to 150˚C). It’s an excellent choice for the Adhesion of Roofing Butyl & Very
Popular for HVAC Applications such as Gluing Insulation to Metal Ducting.
Use for bonding Plastic Laminates, Carpet, Cotton Backed Sheet Vinyls, Stair Nosings, most common Metals
(Zinc Surfaces, Stainless Steel & Aluminium), Zinc, Leather, Resin Rubber & E.V.A
Bostik Supertak NF is Very Popular for HVAC Applications such as Gluing Insulation to Metal Ducting.

Totally Non Flammable when Fully Cured

Forms a Water Resistance Bond when Fully Cured (Ideal for Bathroom, Kitchen & Marine Applications)

Tested to over 110˚C & won’t delaminate in High Temperature Situations Dependant on Bond Line Stress
Part#
304159
304159C
1599
1599R
Product Description
Sold As
Ctn Qty
Each
Each
Each
Each
10
2
-
Bostik 1222 Contact Adhesive, Brush On—500ml
Bostik 1222 Contact Adhesive, Brush On—4L Can
Bostik Supertak NF Contact Adhesive, Clear —Sprayable 17kg Cannister
Bostik Supertak NF Contact Adhesive, Red —Sprayable 17kg Cannister
SABRE GRIP S20 HIGH TACK CONTACT ADHESIVE—Spray On
Sabre Grip S20 (was Tensorgrip F20) has been developed to provide very Fast Tack Times.
Its High Solids & Pressure Sensitive Adhesive Technology makes this product popular with all types
of Production Processes.
Uses: Decorative Surfaces, Soft Fabric, Leather, most Hard Plastic, Insulation Quilt & Slab, Carpet
to most Porous/Non-Porous Substrates eg. Plywood, MDF, Chipboard, Sheetmetal etc

Popular for HVAC Applications such as Gluing Insulation to Metal Ducting

Fast Drying

Long Open Time
Part#

Good & Fast Tack

Good Green Strength

Good Heat Resistance
1549 Sabre Grip S20 Aerosol Adhesive—500ml (6m Coverage)
1549C Sabre Grip S20 Aerosol Adhesive—17kg Cannister
(Faster Application Time, approximately 200m Coverage)
1550 Spray Gun & Hose Set

Portable & Convenient
Product Description
Sold As
Ctn Qty
Each
Each
12
-
Each
-
Page 88
__________________SUNDRY
CLEANERS & DISINFECTANTS
______________________SUPERCELL COIL CLEANER
Formulated for use in Commercial & Industrial facilities.
Supercell Coil Cleaner is an extremely effective Self Rinsing Alkaline Coil Cleaner ideal for Applications in
the HVAC Industry, Restaurants, Shopping Malls, Dairies, Butchers, Fisheries etc.
Supercell Coil Cleaner can be Diluted up to 20 Parts Cold Clean Water for Lightly Soiled Areas
For HVAC Applications, it is popular to Dilute Supercell Coil Cleaner 1/3 Parts or 1/4 Parts Water

Self Rinsing

Non Acidic

1546
Biodegradable

Can be Diluted to suit Application

Great Degreaser

Clear Liquid (doesn’t leave any smears, streaks or residue on
equipment if not wiped dry)
Sold As
Supercell Coil Cleaner—5L
Ctn Qty
Each
4
Heavy Clean—Full Strength
General Purpose Clean —1 /10 Parts Water
Light Clean—1/20 Parts Water
SUPERCELL COIL & DUCT DISINFECTANT_________
Use with Supercell Coil Cleaner to kill any Bacteria after the Cleaning Process.
Use in well Ventilated Areas and Avoid Breathing Fumes & Wear Protective Gloves and Eyewear

Ready to Use Microbiocidal
Part#
Product Description

Disinfects & Deordorises
1547 Supercell Coil & Duct Disinfectant—5L

Kills Germs, Mould & Bacteria

Eliminates Unpleasant Odours
Sold As
Ctn Qty
Each
4
Heavy Clean—Full Strength
General HVAC Applications —1 /3 Parts Water
Light Clean—1/20 Parts Water
__SILFOS OR PRO SILVER 15 Self Fluxing BRAZING ALLOY
Pro Silver 15 is used for High Vibration Joints on Refrigeration Copper Pipes & also for Brazing Contacts onto Copper-based parts
because of its Good Flow Characteristics and Good Electrical Conductivity.
It is not suitable for steel or alloys containing more than 10% Nickel. Standard AS/NZS 1167.1
1551
Sold As
ProSilver 15 (2.5mm x 750mm) - 0.5kg
Per 500gm
METAL CUTTING & THREADING SPRAY______________
Super-Active Drilling, Tapping & Cutting Oil for Difficult Work.

Lubricates & Cools Effectively

Increases the Lifespan of Drills & Drill Heads even at High Speeds

Highly Suitable as Drilling & Tapping Lubricant for Average to Difficult Work.

Increases Efficiency

Ideal for General Metal Work Use
1586
EUROBOOR Cutting & Threading Oil (Spray Can) 400ml
Sold As
Ctn Qty
Each
12
Material Safety Data Sheets are Available on Request for the Products listed above
Page 89
_________________________SUNDRY
___________________________STEP DRILL
Step Drills are ideal for Electrical Contractors and Sheetmetal Workers, they are designed for drilling repetitive holes in Steel,
Stainless Steel, Copper, Brass, Aluminium, Plastic, Plexiglass, Laminates and many other materials

Titanium Nitride coating helps Dissipate Heat, Reduces Friction

Cold Welding increases Tool Life

HSS material for High Strength and Tool Life

Double Fluted Ground Cutting Edge (Longer Life)

5mm Step Depth
Part#
1367
1372
Product Description
Sold As
Has 2mm increments
Each
Each
DRILL BITS—SDS Multi-fit Hammer Drills

Material: Chrome, Nickel, Molybdenum Steel Alloy

Surface Material: Shot Peened

Point type: Vacuum Brazed Carbide

Shank type: SDS Plus –
Suits all Rotary Hammers fitted with an SDS plus chuck
1362
1562
1363
1364
1563
1365
1366
Sold Pkt Qty
Each
Each
Each
Each
Each
Each
Each
10
10
10
10
10
10
10
_____________________________________PILOT DRILLS
Part#
Product Description
1508
1508L
Sold As Pkt Qty
Blu-Mol HSS Pilot Drill, Short 89mm Clam
Blu-Mol HSS Pilot Drill, Long 115mm Clam
Each
Each
10
10
DRILL BITS—Masonry, Double Ended, & Jobber _
We stock the most popular
Drill Bits asked of us but if
you require another size,
please ask, POA
HVAC Hardware _
Part#
Product Description
Sold As
Pkt Qty
1356
1357
1539
1344
1345
1346
1358
1359
1347
1360
1361
1348
1461
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
10
10
10
10
10
10
10
10
10
10
10
10
10
1092
1088
1565
Double Ended Drill Bit 1/8‖ #30 (3.2mm) For 4 Series Rivets
Double Ended Drill Bit 3/16‖#11 (4.9mm) For 6 Series Rivets
Double Ended Drill Bit #20
(4.09mm) For 5 Series Rivets
Pkt/10
Pkt/10
Pkt/10
100
100
1362 SDS Multi-Fit Hammer Drill—5.0 x 110mm
1366 SDS Multi-Fit Hammer Drill—12.0
x 160mm
___________________
AIRCON
FLANGE
Each
10
Each
10
Each
10
Each
10
Each
10
Each
10
Each
10
PERFORMANCE
Page 90
_________________________SUNDRY
___BLADES AND SAWS
HOLESAWS____________________________________
Holesaws ADVANTAGES are Shock Resistant Teeth, Reduces Tooth Strippage, Less Vibration and the Heavy Duty
Backing Plate Eliminates Drive Hole Elongation.

Bi-Metal Construction for Sharper, Longer Lasting Teeth

4/6 Variable Tooth for Smoother Cuts

M3 High Speed Steel cutting Edge for Faster Cutting

48mm Cutting Depth

5mm Thick Heavy Duty Backing Plate Eliminates the need for Drive Plate
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1587
Size Inch
Use in Steel, Aluminium, Brass, Cast
Iron, Plastic or Wood
Sold As
Holesaw—22mm
(7/8‖)
Holesaw—25mm
(1‖)
Holesaw—29mm
(1 1/8‖)
Holesaw—32mm
(1 1/4‖)
Holesaw—35mm
(1 3/8‖)
Holesaw—38mm
(1 1/2‖)
Holesaw—40mm
(1 9/16‖)
Holesaw—41mm
(1 5/8‖)
Holesaw—43mm
(1 11/16‖)
Holesaw—44mm
(1 3/4‖)
Holesaw—45mm
3/8‖ Quick Change Mandrel, Hex Shank with Pilot Drill
(for Holesaws 32-152mm)
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Other Holesaws up
to 210mm & Other
Mandrels are
available, POA
_________RECIPROCATING BLADES
Wreaking Blades & Demolition Blades
have a 1/2” Universal Shank
14 TPI Demolition Sabre Saw Blades (Standard Cut)
Bi-Metal Demolition Reciprocating Blades for Cutting Pipe, Angle Iron,
Nail Embedded Wood, Structural Steel, Slab Construction
6 TPI Wrecking Sabre Saw Blades (Curved Cut)
Bi-Metal Wreaking Reciprocating Blades for Cutting Wood, Sleepers,
Part#
1373
1374
1375
1376
1377
1378
Product Description
Demolition Saw Blade 6‖ x 14TPI
Metric Size
Sold As
Pkt Qty
150mm
225mm
305mm
152mm
225mm
305mm
Each
Each
Each
Each
Each
Each
10
10
10
10
10
10

Flexible & Shatter-proof

Made in Germany
TPI = Teeth Per Inch
HACKSAW BLADES______
Cuts Medium Gauge Metals (1/16-1/4”) eg. Sheetmetal, Angle Iron, Bolts, Channel/Strut, Threaded Rod, Drill Rods, Pipes
& Tubing
Sold As Pkt Qty

Bi-Metal with 8% Cobalt for Extreme Performance
1492 Hacksaw Blade 300 x 12 x 18TPI‖
Each
10

Lasts up to 30% Longer than Standard Bi-Metal
Each
10
Each
10

Shatterproof High Grade Industrial Quality Blade

High Speed Steel Cutting Edge
__INSULATION HANDSAW & SHARPENER
Bahco Insulation Handsaw (Swedish Made) is Specially developed for Cutting Insulation Material like Fibreglass, Polyester, Wool,
EPS (Expanded Polystyrene, cellular plastic up to 75mm) & XPS (Extruded Polystyrene like Styrofoam up to 75mm
It has a Resharpable Blade that has a
Wave Formed Sharpened Edge
(WT Toothing) that allows it to slice
through material creating Minimal Waste
Part#
Product Description
Sold As
1560 Bahco Insulation ProfCut Handsaw—550mm (Resharpable)
1560S Bahco Insulation ProfCut Sharpener
Each
Each
Page 91
_________________________SUNDRY
______KNIFES/CUTTERS & BLADES
CUTTING DISCS/WHEELS, FLAP DISCS, GRINDING DISKS
Cutting Wheels are an all-round cutting Disk combined with outstanding service life with High Cutting speed.
Extremely Resistant when cutting materials with sharp edges and thin-walled profile capable of cutting even faster &
more precisely. USE ON: Cutting Metal Profile, Steel, Mesh, Aluminium & Stainless Steel.
Flap Discs abrasive grain is less hard but very tough, giving disc very good all purpose characteristics. Use for demanding
operations such as Deburring, Machining, Welding
Seams and Breaking Edges.
Sold As Pkt/Ctn Qty
The Glass Fibre Backing gives an even
1337 Cutting Disc—100mm x 1.0mm x 16
Each
50
grinding finish until all the Abrasive Grain is
Each
50
worn away. Leaves no Scratches on the
Each
50
Workpiece.
Each
50
USE ON: Cast, Normal & Stainless
1646 Flap Disc—115mm x 22mm (60 Grit)
Each
5
Steel
1647 Flap Disc—125mm x 22mm (60 Grit)
Each
5
1648 Grinding Disc—115mm x 6mm x 22mm
Each
5
Grinding Discs are a medium-hard disc with
1649 Grinding Disc—125mm x 6mm x 22mm
Each
5
Zirconium Corundum which has a very High
Lifetime & Outstanding Removal rate at
Minimum Effort.
USE ON: Stainless Steel, High Alloy Stainless Steel, Sheet Stainless Steel, Rust/Acid Resistant Stainless Steel, Cast,
Non-Ferrous Metal
ADJUSTABLE HOLE CUTTER—Bordo____________

Quickly & Safely Cuts Neat Round Holes (popular for installing Round Diffusers)

Tungsten Carbide Blade cuts to a Maximum Depth of 50mm

30-290mm Diameter Holes
Part#
1371
Product Description
Sold As
BORDO Adjustable Multi-Function Hole Cutter
Each
_____SHEETMETAL TIN SNIPS—Up to 18 Gauge
Left Cut, Right Cut, cuts left/right from tight curves to straight or Straight Cut, cuts straight (left or right)
Part#
1342
Product Description
Sold As
Sheetmetal Tin Snips—Straight, Left or Right Cut
Set is Left, Right & Straight Snips
Each
Ctn Qty
12
CUTTERS & KNIVES_____________________
Sterling 25mm Screwlock Cutter provides peace of mind when tightening blades, the rubber grip
on back reduces hand slipping when applying pressure and has a extra thick Stainless Steel Sleeve for longer life.
The Orange 18mm Economy Cutter has a pull back safety lock which stops blade slipping
Also available is the Sterling replacement blades.
Part#
308239
308239B
1006
1006B
Product Description
Sold As Ctn Qty
Cutter, Sterling Heavy Duty Screwlock Cutter—25mm
(supplied with 2 Blades)
Cutter Blades, Sterling Cutter Blades—25mm
Cutter, Economy Cutter—18mm (Orange)
Cutter Blades, Economy —18mm
Each
10
Pkt/10
Each
Pkt/10
12
12
12
____________________________WIRE/CABLE CUTTERS
Part#
Product Description
1211
Cable/Wire Cutters
Sold As
Each
Page 92
SUNDRY— TOOLS
Part#
Product Description
Sold As Pkt Qty
1479
1480
Spanner/Speed Wrench—13mm, (Ring & Open End)
Each
Each
1
1
1342
Sheetmetal Tin Snips—Straight, Left or Right Cut
Each
12
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1587
Holesaw—22mm
(7/8‖)
Holesaw—25mm
(1‖)
Holesaw—29mm
(1 1/8‖)
Holesaw—32mm
(1 1/4‖)
Holesaw—35mm
(1 3/8‖)
Holesaw—38mm
(1 1/2‖)
Holesaw—40mm
(1 9/16‖)
Holesaw—41mm
(1 5/8‖)
Holesaw—43mm
(1 11/16‖)
Holesaw—44mm
(1 3/4‖)
Holesaw—45mm
3/8‖ Quick Change Mandrel, Hex Shank with Pilot Drill
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
1
1
1
1
1
1
1
1
1
1
1
1
1373
1374
1375
1376
1377
1378
1492
1493
1494
Demolition/Rescue Saw Blade 6‖ x 14TPI
Each
Each
Each
Each
Each
Each
Each
Each
Each
10
10
10
10
10
10
10
10
10
Handsaw, Bahco Insulation ProfCut —550mm (Resharpable)
Handsaw Sharpener, Bahco Insulation ProfCut
Each
Each
1
1
1367
1372
Each
Each
1
1
1362
1562
1363
1364
1564
1365
1366
Each
Each
Each
Each
Each
Each
Each
10
10
10
10
10
10
10
Pilot Drill, HSS Short 89mm Clam
Pilot Drill, HSS Long 115mm Clam
Each
Each
1
1
1356
1357
1539
1344
1345
1346
1358
1359
1347
1360
1361
1348
1461
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
Each
10
10
10
10
10
10
10
10
10
10
10
10
10
1092
1088
1565
Double Ended Drill Bit—1/8‖ #30 (3.2mm) For 4 Series Rivets
Double Ended Drill Bit—3/16‖#11 (4.9mm) For 6 Series Rivets
Double Ended Drill Bit #20
(4.09mm) For 5 Series Rivets
Pkt/10
Pkt/10
Pkt/10
100
100
1352
1353
1354
1355
Each
Each
Each
Each
10
10
10
10
1370
1370L
Square Driver Bit #No.2 –75mm
Square Driver Bit #No.2 –100mm
Each
Each
10
10
308199
308201
307540
Chuck Driver, Magnetic — Hex Head 1/4‖ (for #8 Tech)
Chuck Driver, Magnetic — Hex Head 5/16‖(for#10 Tech)
Each
Each
Each
12
12
12
1560
1560S
1508
1508L
HVAC
Hardware
___________________
AIRCON
FLANGE
PERFORMANCE
1028
Socket
Driver for_M10
Concrete—Blue
Each
5
Socket
for Steel
& Timber—Red
5
Ph1029
636 5951
, FaxDriver
636 5956,
Email:
sales@airconflange.co.nz, 113 MaysEach
Rd, Onehunga,
Auckland
Page 93
________________________SUNDRY
Part#
Product Description
Sold As Pkt Qty
304639
Vane Setter
Each
12
308081
Test Port Fitting
Includes Sponge Neoprene Gasket & “O” Ring to Eliminate Leakage
Each
25
305529
Duct Strapping Tool
Each
1
Crimping/ Swage Tool—Hand Operated (includes Cutting Device)
Crimping/ Swage Tool—Hand Operated (includes Cutting Device)
Each
1
Each
1
Cable/Wire Cutters
Each
1
Threaded Rod Cutter
Threaded Rod Cutter Blades/Jaws M10
Each
Set/2
1
1
1368
1369
Hollow Wall Anchor Setting Tool—PLIER Type ***Red Tool***
Hollow Wall Anchor Setting Tool—PISTOL Type ***Blue Tool***
Each
Each
1
1
1103
Each
1
1266
Riveter, Hand— SRC502H
Each
1
1231
Riveter, Hand—HR-708 (3 JAW)
Each
1
1232
Riveter, Long Arm—HR-730 (3 JAW)
Each
1
1233
Riveter, Extendable Reach—HR710H
Each
1
1371
Bordo Multi-Function Hole Cutter
(cuts 30-290mm Diameter Holes, 50mm Maximum Depth)
Each
1
1337
1162
1203
1545
1646
1647
1648
1649
Cutting Disc—100mm x 1.0mm x 16
Flap Disc—115mm x 22mm (60 Grit)
Flap Disc—125mm x 22mm (60 Grit)
Grinding Disc—115mm x 6mm x 22mm
Grinding Disc—125mm x 6mm x 22mm
Each
Each
Each
Each
Each
Each
Each
Each
50
50
50
50
5
5
5
5
Cutter, Sterling Screwlock Heavy Duty Cutter—25mm
Cutter Blades—25mm (Snap Off)
Cutter, Economy 18mm (Orange)
Cutter Blades—18mm
Each
Each
Each
Each
10
12
10
10
1267
saBesto Galvanising Premium Zinc Spray (400ml)
Excellent for Spot Welds, Good Adhesion on bare Metal
Each
12
1210
Gun A Nail—Extra Adhesive, Beige (385ml)***like No More Nails***
Quick Drying Early Bond Strength
Each
12
1263
1263E
Tape Measure—8m x 25mm, Metric ***Sterling Professional***
Tape Measure—8m x 25mm, Metric ***Tape-Tech***
Each
Each
12
12
1479
1480
Each
Each
1
1
1214
Zip-Clip Tensioning Tool
Each
1
1586
Euroboor Cutting & Threading Oil—Spray Can—400ml
Metal Cutting Fluid for Increased Lifespan of Drills & Drill Heads
Each
12
1379
1379L
1211
1040
1040B
308239
308239B
1006
1006B
_TOOLS
Page 94
________________________SUNDRY
SPANNER—SPEED RATCHET WRENCH, Ring & Open End
Part#
1479
1480
A
Product Description
Sold As
Each
Each
___________TAPE MEASURE—8m x 25mm Metric
Sterling Professional Tape Measure has Double Nylon Coated Matte Finish Blade for Abrasion Resistance
along with Rubber Sides/Grip for comfort. It has an Extra Thick Blade for Superior Life with Fully Graduated
Millimetre Markings to Limit 100mm Syndrome. It also has a Thickened True Zero End Hook to Maintain
Accuracy along with 4 rivet end hook for extra strength.
Sterling Tape-Tech Tape Measures have a Rubber Back Case with a 3 Rivet End Hook
Part#
Product Description
Sold As
Ctn Qty
Each
Each
12
12
1263 Tape Measure—8m x 25mm**Sterling Professional (Picture A)
1263E Tape Measure—8m x 25mm **Sterling Tape Tech
(Picture B)
B
PLEASE NOTE; POPULAR FLOURESCENT Tape Measures are also Available, POA
TIE DOWNS—New Zealand Made__________________

Ideal for Trades-people, Ladders & General Use

Non-Stretch, Heat-Treated, UV Resistant Polyester Web

Quick Tighten/Release Cam Buckle (Rate 350kg)

Tested Breaking Strain 700kg
Part#
Product Description
Sold As
1555
EZI-Tie—25mm x 1m
(Set of 2 Tie-Downs)
Set
__________HVAC STRAP/MANIFOLD GAUGE HANGER
The HVAC Strap/Manifold Gauge Hanger is constructed from Heavy Duty Woven
Material with an Attached Vinyl Coated Magnet which attaches Quickly & Easily
to the Manifold Gauge, its Magnet allows the Technician to Hang the Gauge
almost ANYWHERE

Safety (no High Voltage near Gauges)

No Damage (Vinyl Coating eliminates Scratching & Damaging)

Increased Gauge Readability & Convenience

Labour Savings (Decreased work time in putting gauges
WHERE you want them
Part#
Product Description
1548
HVAC Strap
Manifold Gauge Hanger
Sold As Pkt Qty
Each
12
PIANO HINGE____________________________________
Other Sizes &
Finishes
Available on
Request
Part#
Product Description
1054
1054H
1054S
Steel Hinge——1800mm x 32mm (Zinc Plated)
Steel Hinge——1800mm x 32mm (Zinc Plated) ***with Holes***
Steel Hinge——1800mm x 32mm (304 Stainless Steel)
Sold As
Each
Each
Each
Page 95
_________________________SUNDRY
_____________________SAFETY EQUIPMENT
GLOVES____________________________________
The Poly/Cotton Knitted Polka Dot Gloves are great when installing Ceiling/Wall Grilles and Diffusers to keep
surfaces clean and free from fingerprints.
The Nitrile Foam Palm Coated Gloves are for Improved Grip on Oily Surfaces, they are also resistant to abrasion,
grease and oils and offer excellent comfort and flexibility.
TigerFlex Gloves are a Nitrile Chemical Resistant Protective Glove (Protection Category 2). TigerFlex Gloves
are great for Gripping on Oily/Greasy Surfaces.
The Premium Rigger Cow Grain Gloves are great for General Purpose Work, Material Handling & Driving.
The Candy Stripe Economical Gloves have a 3 piece Leather Palm and Knuckle Bar, they are great for General Purpose
The Leather Palm, Cotton Back Gloves have a knitted cuff and are a great General Purpose Glove.
The HyFlex Dyneema Glove has an unmatched combination of Comfort, Softness and Cut Protection providing more
incentive to wear. (Cut Resistence Level—EN388 Rating 3, Mechanical Hazard Rating 4343)
Latex Disposable Gloves are Resistant to Mild Chemicals, Water and Food Ingredients (complies to FDA regulations
for food handling). They have excellent Dexterity and Tactile Sensitivity. Latex Gloves also have a Beaded Cuff for
Tear Resistance (Sizes: Small, Medium, Large, Extra Large)
Part#
308237
308238
308234
308043
308044
308053
308058
1567
Product Description
Size
Gloves—Poly/Cotton Knitted Polka Dot
Large
Gloves—Nitrile Foam (Palm Coated, Grey) Nylon Large
Gloves—Rigger Premium Cow Grain, Beige
Large
Gloves—Candy Stripe, Economical
Large
Gloves—Leather Palm,Cotton Back
Large
Gloves—HyFlex Dyneema
Sizes 6-11
Gloves—Latex (Disposable), Powder-Free
Gloves—TigerFlex
Size 10
Sold As
Pkt Qty
Pair
Pair
Pair
Pair
Pair
Pair
Box/100
Pair
12
12
12
12
12
12
Box/100
12
Other Sizes are
Available
as a Non-Stock item
_______HIGH VISIBILITY VESTS—DAY & NIGHT
UMATTA Polyester Day/Night Vests are Long-Lasting Fluorescent Polyester Fabric
(Style 2 Reflective Tape) meeting AS/NZS 4602.1.2011.
Part#
Product Description
308064
308067
Vest—UMATTA High Visibility Day/Night ***Yellow
Vest—UMATTA High Visibility Day/Night ***Orange
Sold As
Each
Each
HEAD & FACE PROTECTION_____
Part#
1509
1510
1511
1512
1512A
1513
1513V
Product Description
Hard Hat, Vented
Safety Glasses, Clear, UV400 —UMATTA U401C
Ear Plugs, 3M Nitro Disposable (Box/200)
Ear Muffs with Headband, Deluxe—3M PELTOR (Class 5)
Ear Muffs Attachment to Hard Hat—3M PELTOR (33 Db)
Mask, Respiratory Flat Fold—UMATTA
Mask, Respiratory Flat Fold with Valve—UMATTA
Price
Each
Each
Box/200
Each
Each
Each
Each
Pkt/Ctn Qty
Each
20
Box/200
Each
Each
20
12
Page 96
_____CONDITIONS & TERMS OF SALE
Product Guarantee/Warranty
All product illustrated in this catalogue is guaranteed. If you receive a faulty product we will replace or repair the item free of
charge. Alternatively, we will credit your account.
Aircon Flange will not be liable for any costs to remove, inspect, freight or other charges incurred in relation to any warranty claim.
The Aircon Flange liability is limited to the value of the defective items only and no claim will be accepted for any consequential
loss due to any faulty items. To return a faulty product, please call the team at Aircon Flange Ltd who will arrange to have the
item picked up and credited from your account and appear on your next statement.
All information printed in this catalogue is to be used as a guide only, Aircon Flange does not accept liability for any loss which
may arise from information published. Aircon Flange products are to be used for their intended application, it is the installer’s
responsibility that any products purchased from Aircon Flange are suitable for their intended use.
Pricing in Catalogue—Excludes GST & Freight
All prices in this catalogue were current at the time of printing. Aircon Flange reserve the right to change prices however we will
endeavor to advise customers of such price changes if/when they occur.
Delivery & Freight Charges
Aircon Flange Ltd will endeavour to have all items in stock delivered the next working day if an order is placed by 10am the
previous day unless it is for a South island customer, then delivery is 2 working days. Freight Charges will be passed onto the
customer and included in their invoice for goods from Aircon Flange Ltd.
Payment Terms
All product sold to the customer remains the property of Aircon Flange Ltd until it is paid for in full.
Invoices are to be paid in full by the 20th of the following month unless special arrangements have been made prior to the
purchase of goods. The full copy of our terms and conditions are supplied with our account application form.
New Zealand Consumer Guarantees Act 1993:
Where the customer is a business as defined by the Act, the Consumer Guarantees Act 1993 does not apply
Copyright of Material in this Catalogue
AIRCON FLANGE LTD/CARLISLE GROUP are the owners of copyright in this catalogue publication including artwork, layout,
logo’s, text and the entire part number system. This catalogue may not be reproduced by any means in whole or in part without
written consent from AIRCON FLANGE LTD.
©AIRCON FLANGE LTD AK/162778.
________________CONTACT DETAILS
Aircon Flange Limited
Postal Address;
PO Box 51-458, Pakuranga, Auckland, New Zealand
Physical Address;
113 Mays Rd, Onehunga, Auckland, New Zealand
Phone;
0064 09 636 5951
Fax;
0064 09 636 5956
Email;
Website;
www.airconflange.co.nz
Page 97
CREDIT ACCOUNT APPLICATION
To Be Completed By Applicants
- Please complete all sections and read the Terms and Conditions of Trade overleaf.
DATE: __________________________________________________
REF No. ___________________________________________________
CLIENT’S TRADE NAME: ________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
CLIENT’S FULL or LEGAL NAME: _________________________________________________________________________________________
_____________________________________________________________________________________________________________________
Phone: __________________________________________________
Fax: ______________________________________________________
Mobile: __________________________________________________
Email: ____________________________________________________
Billing Address: ___________________________________________
Physical Address: ____________________________________________
________________________________________________________
__________________________________________________________
____________________________________ Postcode: _________
_____________________________________
Postcode: __________
COMMERCIAL CLIENTS ONLY
Company Number: __________________________________________
Requested Credit Limit: _____________________________________
Date Established: ___________________________________________
Contact 1: _______________________________________________
Contact 2: _________________________________________________
Position: _________________________________________________
Position: ___________________________________________________
Phone: __________________________________________________
Phone: ____________________________________________________
DETAILS OF OWNER (If Sole Trader) PARTNERS (If Partnership) OR DIRECTORS (If Company)
Full Name: _______________________________________________
Full Name: _________________________________________________
Home Address: ___________________________________________
Home Address: _____________________________________________
____________________________________ Postcode: _________
_____________________________________
Home Phone: _____________________________________________
Home Phone: ______________________________________________
Postcode: __________
TRADE REFERENCES
Business Name 1: _________________________________________
Business Name 2: ___________________________________________
Address or A/C No: ________________________________________
Address or A/C No: __________________________________________
Phone: __________________________________________________
Phone: ____________________________________________________
Fax: ____________________________________________________
Fax: ______________________________________________________
I certify that the above information is true and correct and that I am authorised to make this application for credit. I have read and understand
the TERMS AND CONDITIONS OF TRADE (overleaf) of Aircon Flange Limited which form part of, and are intended to be read in conjunction
with this Credit Account Application and agree to be bound by these conditions. I authorise the use of my personal information as detailed
in the Privacy Act clause therein. I agree that if I am a director or a shareholder (owning at least 15% of the shares) of the Client I
shall be personally liable for the performance of the Client’s obligations under this contract.
SIGNED (SELLER): _______________________________________
SIGNED (CLIENT): __________________________________________
Name: __________________________________________________
Name: ____________________________________________________
Position: _________________________________________________
Position: ___________________________________________________
WITNESS TO CLIENTS SIGNATURE:
ID: ______________________________
DOB:
Signed:
Name: ____________________________
Date: _________________
________________________________________________
________________
Page 98
Aircon Flange Limited—Terms & Conditions of Trade
1.
1.1
1.2
1.3
1.4
1.5
1.6
2.
2.1
2.2
2.3
2.4
2.5
3.
3.1
3.2
3.3
3.4
3.5
3.6
3.7
4.
4.1
4.2
4.3
4.4
4.5
4.6
4.7
Definitions
―Seller‖ shall mean Aircon Flange Limited its successors and assigns or any person acting on behalf of and with the authority of Aircon Flange Limited.
―Client‖ shall mean the Client (or any person acting on behalf of and with the authority of the Client) as described on any quotation, work authorisation or other form as provided by the Seller to the Client.
―Guarantor‖ shall mean that person (or persons), or entity, who agrees to be liable for the debts of the Client on a principal debtor basis.
―Goods‖ shall mean Goods supplied by the Seller to the Client (and where the context so permits shall include any supply of Services as hereinafter defined) and includes Goods described on any invoices, quotation, work
authorisation or any other forms as provided by the Seller to the Client.
―Services‖ shall mean all services supplied by the Seller to the Client and includes any advice or recommendations (and where the context so permits shall include any supply of Goods as defined above).
―Price‖ shall mean the price payable for the Goods as agreed between the Seller and the Client in accordance with clause 3 of this contract.
Acceptance
Any instructions received by the Seller from the Client for the supply of Goods and/or the Client’s acceptance of Goods supplied by the Seller shall constitute acceptance of the terms and conditions contained herein.
Where more than one Client has entered into this agreement, the Clients shall be jointly and severally liable for all payments of the Price.
Upon acceptance of these terms and conditions by the Client the terms and conditions are binding and can only be amended with the written consent of the Seller.
The Client shall give the Seller not less than fourteen (14) days prior written notice of any proposed change of ownership of the Client or any change in the Client’s name and/or any other change in the Client’s details (including
but not limited to, changes in the Client’s address, facsimile number, or business practice). The Client shall be liable for any loss incurred by the Seller as a result of the Client’s failure to comply with this clause.
Goods are supplied by the Seller only on the terms and conditions of trade herein to the exclusion of anything to the contrary in the terms of the Client’s order notwithstanding that any such order is placed on terms that purport to
override these terms and conditions of trade.
Price And Payment
At the Seller’s sole discretion the Price shall be either:
(a) as indicated on invoices provided by the Seller to the Client in respect of Goods supplied; or
(b) the Seller’s quoted Price (subject to clause 3.2) which shall be binding upon the Seller provided that the Client shall accept the Seller’s quotation in writing within thirty (30) days.
The Seller reserves the right to change the Price in the event of a variation to the Seller’s quotation. Any variation from the plan of scheduled works or specifications (including, but not limited to, any variation due to unforeseen
circumstances, or as a result of increases to the Seller in the cost of materials and labour) will be charged for on the basis of the Seller’s quotation and will be shown as variations on the invoice. Payment for all variations must be
made in full at their time of completion.
At the Seller’s sole discretion a deposit may be required.
At the Seller’s sole discretion:
(a) payment shall be due before delivery of the Goods; or
(b) payment for approved Clients shall be made by instalments in accordance with the Seller’s payment schedule; or
(c) payment for approved Clients shall be due twenty (20) days following the end of the month in which a statement is posted to the Client’s address or address for notices.
Time for payment for the Goods shall be of the essence and will be stated on the invoice or any other forms. If no time is stated then payment shall be due twenty (20) days following the end of the month in which a statement is
posted to the Client’s address or address for notices.
Payment will be made by cash, or by cheque, or by bank cheque, or by credit card, or by direct credit, or by any other method as agreed to between the Client and the Seller.
GST and other taxes and duties that may be applicable shall be added to the Price except when they are expressly included in the Price.
Delivery Of Goods
At the Seller’s sole discretion delivery of the Goods shall take place when:
(a) the Client takes possession of the Goods at the Seller’s address; or
(b) the Client takes possession of the Goods at the Client’s nominated address (in the event that the Goods are delivered by the Seller or the Seller’s nominated carrier); or
(c) the Client’s nominated carrier takes possession of the Goods in which event the carrier shall be deemed to be the Client’s agent.
At the Seller’s sole discretion the costs of delivery are:
(a) in addition to the Price; or
(b) for the Client’s account.
The Client shall make all arrangements necessary to take delivery of the Goods whenever they are tendered for delivery. In the event that the Client is unable to take delivery of the Goods as arranged then the Seller shall be
entitled to charge a reasonable fee for redelivery.
Delivery of the Goods to a third party nominated by the Client is deemed to be delivery to the Client for the purposes of this agreement.
The Client shall take delivery of the Goods tendered notwithstanding that the quantity so delivered shall be either greater or lesser than the quantity purchased provided that:
(a) such discrepancy in quantity shall not exceed 5%; and
(b) the Price shall be adjusted pro rata to the discrepancy.
The failure of the Seller to deliver shall not entitle either party to treat this contract as repudiated.
The Seller shall not be liable for any loss or damage whatsoever due to failure by the Seller to deliver the Goods (or any of them) promptly or at all, where due to circumstances beyond the control of the Seller.
5.
5.1
5.2
Risk
If the Seller retains ownership of the Goods nonetheless, all risk for the Goods passes to the Client on delivery.
If any of the Goods are damaged or destroyed following delivery but prior to ownership passing to the Client, the Seller is entitled to receive all insurance proceeds payable for the Goods. The production of these terms and
conditions by the Seller is sufficient evidence of the Seller’s rights to receive the insurance proceeds without the need for any person dealing with the Seller to make further enquiries.
6.
6.1
Title
The Seller and Client agree that ownership of the Goods shall not pass until:
(a) the Client has paid the Seller all amounts owing for the particular Goods; and
(b) the Client has met all other obligations due by the Client to the Seller in respect of all contracts between the Seller and the Client.
Receipt by the Seller of any form of payment other than cash shall not be deemed to be payment until that form of payment has been honoured, cleared or recognised and until then the Seller’s ownership or rights in respect of
the Goods shall continue.
It is further agreed that:
(a) where practicable the Goods shall be kept separate and identifiable until the Seller shall have received payment and all other obligations of the Client are met; and
(b) until such time as ownership of the Goods shall pass from the Seller to the Client the Seller may give notice in writing to the Client to return the Goods or any of them to the Seller. Upon such notice being given the rights of
the Client to obtain ownership or any other interest in the Goods shall cease; and
(c) the Client is only a bailee of the Goods and until such time as the Seller has received payment in full for the Goods then the Client shall hold any proceeds from the sale or disposal of the Goods, up to and including the
amount the Client owes to the Seller for the Goods, on trust for the Seller; and
(d) until such time that ownership in the Goods passes to the Client, if the Goods are converted into other products, the parties agree that the Seller will be the owner of the end products; and
(e) if the Client fails to return the Goods to the Seller then the Seller or the Seller’s agent may enter upon and into land and premises owned, occupied or used by the Client, or any premises where the Goods are situated as the
invitee of the Client and take possession of the Goods, and the Seller will not be liable for any reasonable loss or damage suffered as a result of any action by the Seller under this clause.
6.2
6.3
7.
7.1
7.2
7.3
7.4
7.5
7.6
Personal Property Securities Act 1999 (―PPSA‖)
Upon assenting to these terms and conditions in writing the Client acknowledges and agrees that:
(a) these terms and conditions constitute a security agreement for the purposes of the PPSA; and
(b) a security interest is taken in all Goods previously supplied by the Seller to the Client (if any) and all Goods that will be supplied in the future by the Seller to the Client.
The Client undertakes to:
(a) sign any further documents and/or provide any further information (such information to be complete, accurate and up-to-date in all respects) which the Seller may reasonably require to register a financing statement or
financing change statement on the Personal Property Securities Register;
(b) indemnify, and upon demand reimburse, the Seller for all expenses incurred in registering a financing statement or financing change statement on the Personal Property Securities Register or releasing any Goods charged
thereby;
(c) not register a financing change statement or a change demand without the prior written consent of the Seller; and
(d) immediately advise the Seller of any material change in its business practices of selling the Goods which would result in a change in the nature of proceeds derived from such sales.
The Seller and the Client agree that nothing in sections 114(1)(a), 133 and 134 of the PPSA shall apply to these terms and conditions.
The Client waives its rights as a debtor under sections 116, 120(2), 121, 125, 126, 127, 129, 131 and 132 of the PPSA.
Unless otherwise agreed to in writing by the Seller, the Client waives its right to receive a verification statement in accordance with section 148 of the PPSA.
The Client shall unconditionally ratify any actions taken by the Seller under clauses 7.1 to 7.5.
8.
8.1
Client’s Disclaimer
The Client hereby disclaims any right to rescind, or cancel any contract with the Seller or to sue for damages or to claim restitution arising out of any inadvertent misrepresentation made to the Client by the Seller and the Client
acknowledges that the Goods are bought relying solely upon the Client’s skill and judgment.
9.
9.1
Defects
The Client shall inspect the Goods on delivery and shall within fourteen (14) days of delivery (time being of the essence) notify the Seller of any alleged defect, shortage in quantity, damage or failure to comply with the description
or quote. The Client shall afford the Seller an opportunity to inspect the Goods within a reasonable time following delivery if the Client believes the Goods are defective in any way. If the Client shall fail to comply with these
provisions the Goods shall be presumed to be free from any defect or damage. For defective Goods, which the Seller has agreed in writing that the Client is entitled to reject, the Seller’s liability is limited to either (at the Seller’s
discretion) replacing the Goods or repairing the Goods.
10. Returns
10.1 Returns will only be accepted provided that:
(a) the Client has complied with the provisions of clause 9.1; and
(b) the Seller has agreed in writing to accept the return of the Goods; and
(c) the Goods are returned at the Client’s cost within fourteen (14) days of the delivery date; and
(d) the Seller will not be liable for Goods which have not been stored or used in a proper manner; and
(e) the Goods are returned in the condition in which they were delivered and with all packaging material, brochures and instruction material in as new condition as is reasonably possible in the circumstances.
10.2 The Seller may (in its discretion) accept the return of Goods for credit but this may incur a handling fee of ten percent (10%) of the value of the returned Goods plus any freight.
11. Warranty
11.1 Subject to the conditions of warranty set out in Clause 11.2 the Seller warrants that if any defect in any workmanship of the Seller becomes apparent and is reported to the Seller within twelve (12) months of the date of delivery
(time being of the essence) then the Seller will either (at the Seller’s sole discretion) replace or remedy the workmanship.
11.2 The conditions applicable to the warranty given by Clause 11.1 are:
(a) the warranty shall not cover any defect or damage which may be caused or partly caused by or arise through:
(i) failure on the part of the Client to properly maintain any Goods; or
(ii) failure on the part of the Client to follow any instructions or guidelines provided by the Seller; or
(iii) any use of any Goods otherwise than for any application specified on a quote or order form; or
(iv) the continued use of any Goods after any defect becomes apparent or would have become apparent to a reasonably prudent operator or user; or
(v) fair wear and tear, any accident or act of God.
(b) the warranty shall cease and the Seller shall thereafter in no circumstances be liable under the terms of the warranty if the workmanship is repaired, altered or overhauled without the Seller’s consent.
(e) in respect of all claims the Seller shall not be liable to compensate the Client for any delay in either replacing or remedying the workmanship or in properly assessing the Client’s claim.
11.3 For Goods not manufactured by the Seller, the warranty shall be the current warranty provided by the manufacturer of the Goods. The Seller shall not be bound by nor be responsible for any term, condition, representation or
warranty other than that which is given by the manufacturer of the Goods.
12. Consumer Guarantees Act 1993
12.1 If the Client is acquiring Goods for the purposes of a trade or business, the Client acknowledges that the provisions of the Consumer Guarantees Act 1993 do not apply to the supply of Goods by the Seller to the Client.
13. Intellectual Property
13.1 Where the Seller has designed, drawn or written Goods for the Client, then the copyright in those designs and drawings and documents shall remain vested in the Seller, and shall only be used by the Client at the Seller’s
discretion.
13.2 The Client warrants that all designs or instructions to the Seller will not cause the Seller to infringe any patent, registered design or trademark in the execution of the Client’s order and the Client agrees to indemnify the Seller
against any action taken by a third party against the Seller in respect of any such infringement.
Page 99
Aircon Flange Limited—Terms & Conditions of Trade continued
14. Default & Consequences Of Default
14.1 Interest on overdue invoices shall accrue daily from the date when payment becomes due, until the date of payment, at a rate of two and one half percent (2.5%) per calendar month (and at the Seller’s sole discretion such
interest shall compound monthly at such a rate) after as well as before any judgment.
14.2 In the event that the Client’s payment is dishonoured for any reason the Client shall be liable for any dishonour fees incurred by the Seller.
14.3 If the Client defaults in payment of any invoice when due, the Client shall indemnify the Seller from and against all costs and disbursements incurred by the Seller in pursuing the debt including legal costs on a solicitor and own
client basis and the Seller’s collection agency costs.
14.4 Without prejudice to any other remedies the Seller may have, if at any time the Client is in breach of any obligation (including those relating to payment), the Seller may suspend or terminate the supply of Goods to the Client and
any of its other obligations under the terms and conditions. The Seller will not be liable to the Client for any loss or damage the Client suffers because the Seller has exercised its rights under this clause.
14.5 If any account remains overdue after thirty (30) days then an amount of the greater of twenty dollars ($20.00) or ten percent (10%) of the amount overdue (up to a maximum of two hundred dollars ($200.00)) shall be levied for
administration fees which sum shall become immediately due and payable.
14.6 Without prejudice to the Seller’s other remedies at law the Seller shall be entitled to cancel all or any part of any order of the Client which remains unfulfilled and all amounts owing to the Seller shall, whether or not due for
payment, become immediately payable in the event that:
(a) any money payable to the Seller becomes overdue, or in the Seller’s opinion the Client will be unable to meet its payments as they fall due; or
(b) the Client becomes insolvent, convenes a meeting with its creditors or proposes or enters into an arrangement with creditors, or makes an assignment for the benefit of its creditors; or
(c) a receiver, manager, liquidator (provisional or otherwise) or similar person is appointed in respect of the Client or any asset of the Client.
15. Security And Charge
15.1 Despite anything to the contrary contained herein or any other rights which the Seller may have howsoever:
(a) where the Client and/or the Guarantor (if any) is the owner of land, realty or any other asset capable of being charged, both the Client and/or the Guarantor agree to mortgage and/or charge all of their joint and/or several
interest in the said land, realty or any other asset to the Seller or the Seller’s nominee to secure all amounts and other monetary obligations payable under these terms and conditions. The Client and/or the Guarantor
acknowledge and agree that the Seller (or the Seller’s nominee) shall be entitled to lodge where appropriate a caveat, which caveat shall be withdrawn once all payments and other monetary obligations payable hereunder
have been met.
(b) should the Seller elect to proceed in any manner in accordance with this clause and/or its sub-clauses, the Client and/or Guarantor shall indemnify the Seller from and against all the Seller’s costs and disbursements
including legal costs on a solicitor and own client basis.
(c) the Client and/or the Guarantor (if any) agree to irrevocably nominate constitute and appoint the Seller or the Seller’s nominee as the Client’s and/or Guarantor’s true and lawful attorney to perform all necessary acts to give
effect to the provisions of this clause 15.1.
16. Cancellation
16.1 The Seller may cancel any contract to which these terms and conditions apply or cancel delivery of Goods at any time before the Goods are delivered by giving written notice to the Client. On giving such notice the Seller shall
repay to the Client any sums paid in respect of the Price. The Seller shall not be liable for any loss or damage whatsoever arising from such cancellation.
16.2 In the event that the Client cancels delivery of the Goods the Client shall be liable for any loss incurred by the Seller (including, but not limited to, any loss of profits) up to the time of cancellation.
17. Privacy Act 1993
17.1 The Client and the Guarantor/s (if separate to the Client) authorises the Seller to:
(a) collect, retain and use any information about the Client and/or Guarantors, for the purpose of assessing the Client’s and/or Guarantors creditworthiness or marketing products and services to the Client and/or Guarantors; and
(b) disclose information about the Client and/or Guarantors, whether collected by the Seller from the Client and/or Guarantors directly or obtained by the Seller from any other source, to any other credit provider or any credit
reporting agency for the purposes of providing or obtaining a credit reference, debt collection or notifying a default by the Client and/or Guarantors.
17.2 Where the Client and/or Guarantors are an individual the authorities under clause 17.1 are authorities or consents for the purposes of the Privacy Act 1993.
17.3 The Client and/or Guarantors shall have the right to request the Seller for a copy of the information about the Client and/or Guarantors retained by the Seller and the right to request the Seller to correct any incorrect information
about the Client and/or Guarantors held by the Seller.
18. Unpaid Seller’s Rights
18.1 Where the Client has left any item with Seller for repair, modification, exchange or for the Seller to perform any other Service in relation to the item and Seller has not received or been tendered the whole of the Price, or the
payment has been dishonoured, the Seller shall have:
(a) a lien on the item;
(b) the right to retain the item for the Price while the Seller is in possession of the item;
(c) a right to sell the item.
18.2 The lien of the Seller shall continue despite the commencement of proceedings, or judgement for the Price having been obtained.
19. Construction Contracts Act 2002
19.1 The Client hereby expressly acknowledges that:
(a) the Seller has the right to suspend work within five (5) working days of written notice of its intent to do so if a payment claim is served on the Client, and:
(i) the payment is not paid in full by the due date for payment and no payment schedule has been given by the Client; or
(ii) a scheduled amount stated in a payment schedule issued by the Client in relation to the payment claim is not paid in full by the due date for its payment; or
(iii) the Client has not complied with an adjudicator’s notice that the Client must pay an amount to the Seller by a particular date; and
(iv) the Seller has given written notice to the Client of its intention to suspend the carrying out of construction work under the construction contract.
(b) if the Seller suspends work, it:
(i) is not in breach of contract; and
(ii) is not liable for any loss or damage whatsoever suffered, or alleged to be suffered, by the Client or by any person claiming through the Client; and
(iii) is entitled to an extension of time to complete the contract; and
(iv) keeps its rights under the contract including the right to terminate the contract; and may at any time lift the suspension, even if the amount has not been paid or an adjudicator’s determination has not been complied with.
(c) if the Seller exercises the right to suspend work, the exercise of that right does not:
affect any rights that would otherwise have been available to the Seller under the Contractual Remedies Act 1979; or
enable the Client to exercise any rights that may otherwise have been available to the Client under that Act as a direct consequence of the Seller suspending work under this provision.
20.
General
20.1 If any provision of these terms and conditions shall be invalid, void, illegal or unenforceable the validity, existence, legality and enforceability of the remaining provisions shall not be affected, prejudiced or impaired.
20.2 These terms and conditions and any contract to which they apply shall be governed by the laws of New Zealand and are subject to the jurisdiction of the courts of New Zealand.
20.3 The Seller shall be under no liability whatsoever to the Client for any indirect and/or consequential loss and/or expense (including loss of profit) suffered by the Client arising out of a breach by the Seller of these terms and
conditions.
20.4 in the event of any breach of this contract by the Seller the remedies of the Client shall be limited to damages which under no circumstances shall exceed the Price of the Goods.
20.5 The Client shall not be entitled to set off against, or deduct from the Price, any sums owed or claimed to be owed to the Client by the Seller nor to withhold payment of any invoice because part of that invoice is in dispute.
20.6 The Seller may license or sub-contract all or any part of its rights and obligations without the Client’s consent.
20.7 The Seller reserves the right to review these terms and conditions at any time. If, following any such review, there is to be any change to these terms and conditions, then that change will take effect from the date on which the
Seller notifies the Client of such change.
20.8 The provisions of the Contractual Remedies Act 1979 shall apply to this contract as if section 15(d) were omitted from the Contractual Remedies Act 1979.
20.9 Neither party shall be liable for any default due to any act of God, war, terrorism, strike, lock-out, industrial action, fire, flood, drought, storm or other event beyond the reasonable control of either party.
20.10 The failure by the Seller to enforce any provision of these terms and conditions shall not be treated as a waiver of that provision, nor shall it affect the Seller’s right to subsequently enforce that provision.
Page 100
Aircon Flange Limited
PO Box 51-458
Pakuranga
AUCKLAND 2140
Ph (09) 636 5951
Fax (09) 636 5956
Personal/Director’s Guarantee and Indemnity
IN CONSIDERATION of Aircon Flange Limited and its successors and assigns
(―the Seller‖) at the request of the Guarantor (as is now acknowledged) supplying and
continuing to supply goods and/or services to
(―the Client‖) [Insert Company Name In Box Provided]
I/WE (also referred to as the ―Guarantor/s‖) UNCONDITIONALLY AND IRREVOCABLY:
1.
GUARANTEE the due and punctual payment to the Seller of all moneys which are now owing to the Seller by the Client and all further sums of
money from time to time owing to the Seller by the Client in respect of goods and services supplied or to be supplied by the Seller to the Client
or any other liability of the Client to the Seller, and the due observance and performance by the Client of all its obligations contained or implied
in any contract with the Seller. If for any reason the Client does not pay any amount owing to the Seller the Guarantor will immediately on
demand pay the relevant amount to the Seller.
2.
HOLD HARMLESS AND INDEMNIFY the Seller on demand as a separate obligation against any liability (including but not limited to damages
costs losses and legal fees (as defined hereunder in paragraph (b) hereof)) incurred by or assessed against the Seller in connection with:
(a) the supply of goods and/or services to the Client; or
(b) the recovery of moneys owing to the Seller by the Client including the enforcement of this Guarantee and Indemnity, and including but not
limited to the Seller’s nominees costs of collection and legal costs calculated on a solicitor and own client basis; or
(c) moneys paid by the Seller with the Client’s consent in settlement of a dispute that arises or results from a dispute between, the Seller, the
Client, and a third party or any combination thereof, over the supply of goods and/or services by the Seller to the Client.
I/WE FURTHER ACKNOWLEDGE AND AGREE THAT
3.
This Guarantee and Indemnity shall constitute an unconditional and continuing Guarantee and Indemnity and accordingly shall be irrevocable
and remain in full force and effect until the whole of moneys owing to the Seller by the Client and all obligations herein have been fully paid
satisfied and performed.
4.
No granting of credit, extension of further credit, or granting of time and no waiver, indulgence or neglect to sue on the Seller’s part (whether in
respect of the Client or any one or more of any other Guarantor(s) or otherwise) and no failure by any named Guarantor to properly execute
this Guarantee and Indemnity shall impair or limit the liability under this Guarantee and Indemnity of any Guarantor. Without affecting the
Client’s obligations to the Seller, each Guarantor shall be a principal debtor and liable to the Seller accordingly.
5.
If any payment received or recovered by the Seller is avoided by law such payment shall be deemed not to have discharged the liability of the
Guarantor, and the Guarantor and the Seller shall each be restored to the position in which they would have been had no such payment been
made.
6.
The term ―Guarantor‖ whenever used in this Guarantee and Indemnity shall, if there is more than one person named as guarantor, mean and
refer to each of them individually and all of them together unless the context otherwise requires, and the obligations and agreements on the
part of the Guarantor contained in this Guarantee and Indemnity shall bind them jointly and severally.
7.
I/We have been advised to obtain independent legal advice before executing this Guarantee and Indemnity. I/we understand that
I/we am/are liable for all amounts owing (both now and in the future) by the Client to the Seller.
8.
I/we irrevocably authorise the Seller to obtain from any person or company any information which the Seller may require for credit reference
purposes. I/We further irrevocably authorise the Seller to provide to any third party, in response to credit references and enquiries about me/us
or by way of information exchange with credit reference agencies, details of this Guarantee and Indemnity and any subsequent dealings that
I/we may have with the Seller as a result of this Guarantee and Indemnity being actioned by the Seller.
9.
The above information is to be used by the Seller for all purposes in connection with the Seller considering this Guarantee and Indemnity and
the subsequent enforcement of the same.
GUARANTOR-1
SIGNED:
FULL NAME:
PRESENT ADDRESS:
SIGNATURE OF WITNESS:
NAME OF WITNESS:
OCCUPATION:
PRESENT ADDRESS:
EXECUTED as a Deed this
day of
20____
GUARANTOR-2
SIGNED:
FULL NAME:
PRESENT ADDRESS:
SIGNATURE OF WITNESS:
NAME OF WITNESS:
OCCUPATION:
PRESENT ADDRESS:
EXECUTED as a Deed this
day of
20____
Note: 1. If the Client is a sole trader or partnership the Guarantor(s) should be some other suitable person(s).
2.
If the Client is a club or incorporated society the Guarantor(s) should be the president and secretary or other committee member.
WARNING: THIS IS AN IMPORTANT DOCUMENT
YOU SHOULD SEE YOUR OWN LAWYER OR ADVISOR BEFORE SIGNING IT
Page 101
INDEX______________________________

ACCESS DOORS & HARDWARE

AIR CONDITIONING BRACKETS/MOUNTS

AIR DUFFUSION

DUCT INSTALLATION & ACCESSORIES

DUCT MANUFACTURING PRODUCTS

FASTENERS

HVAC SUPPORT SYSTEMS

PIPE INSTALLATION PRODUCTS

SUNDRY ITEMS
Page#
- Access Doors …………..…..........…...…………………………………………..…….………………18
- Door Handles, Cam Lock, Sash Locks, Latches & Swivel Locks………….……………...…..19-20
- Hinges………....…………………………..……………...………...…………...…………....…..…20,95
- Cantilever Brackets ……………………………………………...……………….....………………….63
- Channel/Strut, Accessories & Installation Fasteners…..………………...…………...…39-46,58-78
- Ducting/Capping/Trunking for Air Conditioners & Heatpumps Units ………......…….………….56
- Duragal Angle/Angle Line...……………….………..……………………………………………6,40,64
- Wall & Roof Brackets/Supports…….…………...…………………………………………..…57,62,84
- Ceiling, Floor & Wall Diffusers & Grilles...………………….……………………………..……...54-55
- Duct Fittings, Poly (Y Branches, Branch Take Offs & Reducers)……………………...…………..53
- Flexible Duct—Acoustic, Nude, Insulated & Semi-Rigid ……………………………….……..50-51
- Grilles—Floor, Wall & Eggcrate….………………………………...………………………...……54-55
- Neck Adaptors, Poly (sometimes called Square to Round)……………………………………..….54
- Springs, Tension Springs for holding Grilles & Diffusers on………………….....…………..….….55
- Acoustic, Plain & Insulated (Fire Retardant), Semi Rigid Aluminium Ducting……………......50-51
- Cable Ties/Duct Straps……………………………………………......…………………..…..……25,49
- Cable Lock System—KwikWire, Rise & Zip Lock (Including Seismic)……..……………….…26-37
- Circular Ducting Lined Clamps ………………...……...……………………………….25,39,59,76-77
- Clamps—Beam, Flange, Purlin & Multi-Clamp & Band………………………..………..…….……22
- Channel/Strut —Metal Framing, Accessories & Fasteners……………...…...…..…….39-46,58-78
- Duct Fittings—Y Branches, Double Branch Take-Offs & Reducers……...….…………………...53
- Duct Insulation, Duct Liner & Duct Wrap………………..…………...……………14-17,52,80,85-86
- Duct Joiners, Galvanised………………...……………………………………………..……….……..50
- Duct Saddles, Strapping & Tape…….………...……………………………………………...………49
- Duragalv Angle/Angle Line…………….……………...……………………....……………...…6,40,64
- Duct Brackets & Holders — L,V, Z, DSM10 & Top Bracket........................................................21
- Duct Protection Dust Covers………………………………………………………………………5,6,86
- Duct Straps (Nylon) & Duct Strap Tool……...……………………………………………..…......25,49
- Duct Sealants & Metal Adhesive…... ..……….………………………………………..……….…….24
- Ducting—Flexible, Semi Rigid & PVC……..……………………………………………...…..50-51,56
- Fasteners—Screws/Rivets/Bolts/Nuts………………………………………………...........6,12,41-48
- Flexible Duct—Plain, Insulated, Acoustic & Semi-Rigid …………………………………...…...50-51
- Gasket/Foam Tape…………..….………………...………………………………...……………...…..23
- Hole Cutter……………………………………………………………………………………..…….55,92
- Sealants & Metal Adhesives………………………………………………………………………….. 24
- Seismic Products …………..…………………………………………………………………...…..26-37
- Strapping for Suspension…..…………….…………...…………..………..…..………..…22,25-34,49
- Strut/Channel—Metal Framing, Accessories & Fasteners ………………..……………39-46,58-78
- Tapes—Aluminium Foil, Foam, HVAC & PVC. …...……..………………………..…….…………..23
- Access Doors & Panels ………………………………..………………………………………………18
- Adhesives, Glue for Insulation to Metal …………………………………………………………..15-16
- Aircon Flange 25mm & 32mm, Corners & Cleats………...……………………………..………….4-6
- Damper Regulators & Parts………………………………………………………………………….8-10
- Duct Fasteners—Tech Screws, Pop Rivets & Bolts/Set Screws………………………………...6,12
- Duct Insulation, Duct Liner & Duct Wrap…………….………….…………..…..…14-17,52,80,85-86
- Duct Protection Dust Covers………………………………………………………………………...5,86
- Flexible Duct Connector—Indoor and Outdoor Applications…………………………………………7
- Insulation Blanket/Pins/Fasteners/Hangers & Welders……….…………….…………………..13-17
- Test Port Fitting…………...……...................................................................................................10
- Vane Runner, Vane Rail………………………………………………………………………………..11
- Bolts, Nuts & Washers...…………….……………………...………………………..……….6,41,70-71
- Drill Bits (Masonry, Double Ended & Jobber)…………..……..………….…………...…12,48,72,90
- Hollow Wall Anchors (also called Rawl Plugs)…………….………...………………….……37,45,75
- Pin Anchors…………………………………………...……………………………………..…..37,42,75
- Powers Vertigo Fasteners…… ………………………………..…....………………….36,42-44,73-74
- Rivets, Riveters & Double Ended Drill Bit……………………..…………...….………...…6,12,48,72
- Screws—Tech Screws Metal/Wood & Sure Fix…...…..………………..…….……………6,12,47,71
- Screws—Coach & Surefix...…………………………………..…………...…………..…..………47,71
- Screws—Plasterboard, Self Drilling………………………………...………………………………...45
- Seismic Fasteners…………………………………………………………..…..…..…...………….26-37
- Sleeve Anchors/Drop In Anchors…..………………………………………………...…….….37,45,75
- Strapping for Suspension………………….....…..………...………….….………..…..….22,25-34,49
- Tech Screws (Metal & Wood, Self-Drilling)……………………………...……….…………6,12,47,71
- Threaded Rod, Threaded Rod Cutter/Blades, Couplers & Base Plates………….............36,46,70
- Wall Anchors…………………….……………………………………...………….............................45
- Angle Line/Duragal Angle…………………………………………………………………….…..6,40,64
- Cable Lock Systems…………………………………………….…………………………………..26-37
- Cable Tray & Fittings……………………………………………………………………………......66-68
- Channel/Strut, Fasteners & Accessories…………..……………..……..……….……….39-46,58-78
- Fasteners—Screws/Rivets/Bolts/Nuts………………………………………….…...6,12,36-48,70-72
- Rooftop Supports…………... …………………………………………...……...….…………...57,63,84
- Strut/Channel—Metal Framing, Accessories & Fasteners ….……………..…………...39-46,58-78
- Cantilever Brackets …………………………………………...……………….....………….………...63
- Channel Clips for Pipe……..………………………………...………………….…...….38,60,63,76-78
- Flashings—Dektite Waterproof Flexible Flashings……..……………………..……….….....….81-82
- Munzing Rings (also called Pipe Clamps)………………………………………………………..59,77
- Passive Fire Protection .…..…………………...………………………………………………...……79
- Pipe Clamps & Saddles…..…………………...……………………….……….………59-60,63,76-78
- PVC Pipe & Fittings…..…………………...……………………………….………………...………...56
- Rod Mounting Clips………………...……………………………...……………………………38,60,78
- Sikla Pipe Installation System………………...………………………………………………..39,58,76
- Top Hat Roof Penetration Kits…………………………………………………………………………83
- Blades & Saws (Demolition, Wrecking, Hacksaw and Holesaw)…………………………………..91
- Coil Cleaner, Degreaser & Disinfectant.………………………………………………………………89
- Cutters, Knifes, Blades & Sheetmetal Snips..………………………………………………………..92
- Cutting Discs, Flap Discs, Grinding Discs………………………………………………...…..40,63,92
- Drilling Parts (Drillbits, Step Drill, Pilot Drill, SDS Multi-fit)…..………….……….………12,48,72,90
- Duct Liner & Duct Wrap—25mm/50mm Insulation,……………….…………..……..15-17,52,85-86
- HVAC Strap/Manifold Gauge Hanger …………….…………………………………………………..95
- ProSilver 15% or Silfos..…………….………..……………………………………………..………….89
- Safety Equipment—(Gloves, Hi–Vis Vests, Hard Hats, Glasses, Ear Muffs, Masks)..….………96
- Sprays & Adhesives (Zinc Spray, Black Paint, Silicone, Expandable Foam, Glue)………….87-88
- Tools……………………… …………………………………………………………………………93-94
Page 102
Postal Address:
Physical Address:
PO Box 51-458
Pakuranga
Auckland
New Zealand
113 Mays Rd
Onehunga
Auckland
New Zealand
Phone;
Fax;
Email;
Website;
0064 09 636 5951
0064 09 636 5956
www.airconflange.co.nz
PROUD DISTRIBUTORS IN NEW ZEALAND AND PACIFIC FOR
WHO SUPPORT THE FOLLOWING ORGANISATIONS
Page 103

To Our Product Catalogue

Transcription

Similar documents

Zinc - Kwun Tong Government Secondary School

Minerals - Saskatchewan Mining Association

Micronutrient Compatibility - The Fluid Fertilizer Foundation

Top 5 tips

Facility Rental Packet

DS275-18V

boomarangs

U.S. Department ofLabor Matm`hd Safety Data Sbcet Manufacturer`s

EZGreen sales sheet_Dec12.indd

Perma-Green III