DEH-P8000R UC

Transcription

DEH-P8000R UC

Service
Manual
DEH-P8000R/UC
ORDER NO.
CRT2344
MULTI-CD/DAB CONTROL HIGH POWER CD PLAYER WITH RDS TUNER
DEH-P8000R
UC
MULTI-CD CONTROL HIGH POWER CD PLAYER WITH FM/AM TUNER
DEH-P8050
ES
- See the separate manual CX-916(CRT2300) for the CD mechanism description, disassembly and circuit
description.
- The CD mechanism employed in this model is one of S8 series.
SERVICE PRECAUTION
In the first production, the following parts had been mounted temporarily to support the microcomputer
<DEH-P8000R/UC> IC601 (PD5487A): R591 (RS1/16S473J), R592 (RS1/16S102J), and IC591 (Non spare part).
When replacing IC601 PD5487A, use PD5487B as IC601, and then remove the 3 parts listed above.
<DEH-P8050/ES> IC601 (PD5488A): R591 (RS1/16S473J), R592 (RS1/16S102J), and IC591 (Non spare part).
When replacing IC601 PD5488A, use PD5488B as IC601, and then remove the 3 parts listed above.
CONTENTS
1.
2.
3.
4.
5.
6.
SAFETY INFORMATION ............................................2
EXPLODED VIEWS AND PARTS LIST .......................3
BLOCK DIAGRAM AND SCHEMATIC DIAGRAM ...10
PCB CONNECTION DIAGRAM ................................28
ELECTRICAL PARTS LIST ........................................38
ADJUSTMENT..........................................................47
7. GENERAL INFORMATION .......................................51
7.1 DIAGNOSIS ........................................................51
7.1.1 TEST MODE ..............................................51
7.1.2 DISASSEMBLY .........................................55
7.2 IC ........................................................................60
8. OPERATIONS AND SPECIFICATIONS.....................71
PIONEER ELECTRONIC CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE INC. P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A.
PIONEER ELECTRONIC [EUROPE] N.V. Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936
C PIONEER ELECTRONIC CORPORATION 1999
K-ZZB. APR. 1999 Printed in Japan
DEH-P8000R,P8050
- CD Player Service Precautions
1. For pickup unit(CXX1285) handling, please refer
to"Disassembly"(see page 51).
During replacement, handling precautions shall be
taken to prevent an electrostatic discharge(protection
by a short pin).
2. During disassembly, be sure to turn the power off
since an internal IC might be destroyed when a connector is plugged or unplugged.
3. Please checking the grating after changing the service pickup unit(see page 49).
1. SAFETY INFORMATION
CAUTION
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely; you should not risk trying to do so
and refer the repair to a qualified service technician.
WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of
California to cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 - Proposition 65
2
DEH-P8000R,P8050
2. EXPLODED VIEWS AND PARTS LIST
2.1 PACKING
20
18
19
7
24
15
17
14
9
10
11
12
13
8
1
23
16
5
3
4
26
2
28
21
27
25
3
DEH-P8000R,P8050
NOTE:
- Parts marked by “*” are generally unavailable because they are not in our Master Spare Parts List.
- Screws adjacent to ∇ mark on the product are used for disassembly.
- PACKING SECTION PARTS LIST
Mark No.
1
2
*
3
*
4
5
*
*
*
*
*
Part No.
DEH-P8050/ES
CDE5854
CEA2426
CNS5031
CZA3371
CZE3188
Description
Cord Assy
Base Assy
Base
Sheet
Polyethylene Bag
DEH-P8000R/UC
CDE5854
CEA2426
CNS5031
CZA3371
CZE3188
6
7
8
9
10
•••••
Spring
Case Assy
Screw
Screw
CBH-865
CXB3520
BMZ50P060FMC
CBA-102
CBH-865
CXB3520
BMZ50P060FMC
Not used
11
12
13
14
15
Screw
Screw
Polyethylene Bag
Screw
Nut
CBA1002
CBA1120
CEG-127
CMZ50P060FMC
NF50FMC
CBA1002
CBA1120
CEG-127
CMZ50P060FMC
Not used
16
17
18
19
20-1
Polyethylene Bag
Handle
Strap
Bush
Polyethylene Bag
CEG-158
CNC5395
CNF-111
CNV1917
CEG1116
CEG-158
CNC5395
Not used
CNV1917
CEG1116
20-2
20-3
20-4
20-5
20-6
Owner’s Manual
Owner’s Manual
Installation Manual
Caution Card
Card
CRD2974
Not used
CRD2975
CRP1207
ARY1048
CRD2980
CRD2981
CRD2982
CRP1207
Not used
20-7
21
22
23
24
Caution Card
Polyethylene Bag
•••••
Battery
Carton
CRP1209
CEG1185
CRP1210
* CEG1088(Cover)
CEX1006
CHG3775
CEX1006
CHG3773
Contain Box
Protector
Protector
Remote Control Assy
CHL3775
CHP2032
CHP2033
CXB3875
CHL3773
CHP2032
CHP2033
CXB3875
25
26
27
28
- Owner's Manual, Installation Manual
Model
DEH-P8000R/UC
DEH-P8050/ES
4
Part No.
CRD2974
CRD2975
CRD2980
CRD2981
CRD2982
Language
English, French
English, French
English, Spanish
Portuguese, Arabic
English, Spanish, Portuguese, Arabic
DEH-P8000R,P8050
2.2 EXTERIOR
122
13
13
8
11
14
14
3
12
17
24
24
12
24
2
4
2
123
124
16
1
1
1
1
5
6
21
125
60
79
89
B
B
65
7
30
92
99
31
71
51
64
93
61
29
127
76
77
2
127
77
127
63
90
88
76
15
49
127
97
9
19
83
95
20
22
18
35
68
82
62
44
87
53
40
62
32
67
86
94
127
47
86
91
78
84
46
126
66 81
69
42
126
66
50
78
66
73
75
2
34
91
74
66
85
52
39
67
66
33
96
69
48
43
98
127
41
74
10
23
28
108
121
108
116
2
117
108
110
115
107
2
26
2
114
59
111
25
118
119
109
113
120
112
106
27
27
5
DEH-P8000R,P8050
(1) EXTERIOR SECTION PARTS LIST
Mark No. Description
1
2
3
4
5
*
*
6
Part No.
Screw
Screw
Cap
Cord Assy
Cord Assy
BSZ26P060FMC
BSZ30P050FMC
6
7
8
9
10
Cord Assy
Connector
Cord Assy
IC(IC301)
Transistor(Q803,921,998)
See Contrast table(2)
11
12
13
14
15
Fuse(10A)
Cap
Cord Assy
Resistor
Antenna Cable
CEK1136
CNS1472
16
17
18
19
20
Case
Holder
Earth Terminal
Holder
Spacer
CNB2426
CNC6798
21
22
23
24
25
Cushion
Cushion
Panel
Cap
PCB
CNM6065
CNM6387
26
27
28
29
30
Screw
Screw
Insulator
Cover
Tuner Amp Unit
BSZ30P200FMC
CBA1447
CNM6135
CNM6489
31
32
33
34
35
Screw
Clamper
Clamper
Clamper
Plug(CN901)
BMZ26P160FMC
CEF1004
36
37
38
39
40
•••••
•••••
•••••
Plug(CN851)
Plug(CN101)
41
42
43
44
45
Connector(CN801)
Connector(CN991)
Connector(CN681)
Connector(CN351)
•••••
46
47
48
49
50
Mini Pin Jack(CN451)
Holder
Holder
Holder
Insulator
Mark No. Description
Part No.
51
52
53
54
55
Heat Sink
FM/AM Tuner Unit
Holder
•••••
•••••
56
57
58
59
60
•••••
•••••
•••••
Chassis Unit
Panel Assy
CXB3556
CXB3578
61
62
63
64
65
Screw
Screw
Screw
Screw
Screw
BMZ20P030FMC
CBA1154
BPZ20P060FMC
CBA1060
CBA1061
66
67
68
69
70
Screw
Screw
Screw
Spring
•••••
CBA1082
CBA1430
CBA1454
CBH2130
71
72
73
74
75
Cord
•••••
Connector
Roller
Frame
CDE5960
76
77
78
79
80
Spacer
Spacer
Spacer
PCB
•••••
CNM6155
CNM6156
CNM6419
CNP5321
CEF1009
CKM1278
81
82
83
84
85
PCB
Panel
Lighting Conductor
Cover
Guide
CNP5355
CNS5247
CNV5605
CNV5610
CNV5672
CKS-786
CKS1058
86
87
88
89
90
Guide
Rack
Gear
Gear
Torque Limiter Unit
CNV5696
CNV5697
CNV5698
CNV5761
CNV5762
91
92
93
94
95
Holder
Switch(S951)
Switch(S952)
Arm Unit
Frame Unit
CNV5763
CSN1012
CSN1022
CXB3574
CXB3575
96
97
98
99
100
Holder Unit
Bracket Unit
Arm Unit
Motor(M951)
•••••
CXB3576
CXB3577
CXB3866
CXM1085
CDE5842
CDE5846
CDE5854
PAL005A
2SD2396
RS1/2PMF102J
CDH1256
CNC8170
CNP5508
CKS1532
CKS1960
CKX1046
CNC8168
CNC8169
CNR1535
CWE1501
CNC7532
CKS3997
CLA3583
CNC8201
DEH-P8000R,P8050
Mark No.
101
102
103
104
105
Description
•••••
•••••
•••••
•••••
•••••
Part No.
106
107
108
109
110
Detach Grille Assy
Screw
Screw
Button( )
Button(D)
111
112
113
114
115
Button(SOURCE)
Button(
)
Button(EQ)
Button(1-6)
Housing
BPZ20P060FMC
BPZ20P080FZK
CAC5891
Mark No.
116
117
118
119
120
121
122
123
124
125
Description
Keyboard Unit
Connector(CN1902)
Connector(CN1901)
OEL Module
Grille Unit
Cover Unit
Case Assy
Remote Control Assy
Battery Cover
Part No.
CWM6226
CKS3995
CKS3996
MXK8002
CXB3520
CXB3875
CNS5032
CD Mechanism Module(S8) CXK5251
126 Washer
127 Washer
2-1816-0035-D2-00
2-1821-0045-D2-00
CNV5606
(2) CONTRAST TABLE
DEH-P8000R/UC and DEH-P8050/ES are constructed same except for the following:
Description
Cord Assy
Cord Assy
Cord Assy
Cap
Earth Terminal
Part No.
DEH-P8000R/UC
DEH-P8050/ES
Not used
CDE5841
CDE5840
Not used
Not used
CDE5844
Not used
CNV2680
CNC7358
CNC6469(Holder)
Spacer
Panel
Cap
Tuner Amp Unit
Clamper
CNM6482
CNS5256
CNV2680
CWM6222
Not used
CNM4870(Cushion)
CSN5548
Not used
CWM6224
CEF1088
43
44
47
50
106
Connector(CN681)
Connector(CN351)
Holder
Insulator
Detach Grille Assy
Not used
CKS3606
CNC7533
CNM5967
CXB3980
CKS3597
CKS3602
Not used
Not used
CXB3288
109
111
112
113
114
Button( )
Button(SOURCE)
Button(
)
Button(EQ)
Button(1-6)
CAC5890
CAC5892
CAC5893
CAC5894
CAC5910
CAC6126
CAC5901
CAC6045
CAC5899
CAC5911
120
121
Grille Unit
Cover Unit
CXB3984
CXB4309
CXB3286
CXB4310
Mark No.
3
4
6
13
18
20
23
24
30
33
7
DEH-P8000R,P8050
2.3 CD MECHANISM MODULE
8
DEH-P8000R,P8050
- CD MECHANISM MODULE SECTION PARTS LIST
Mark No.
1
2
3
4
5
*
Description
Control Unit
Connector(CN802)
Connector(CN801)
Connector(CN701)
Connector(CN101)
Part No.
CWX2358
CKS2192
CKS2193
CKS2771
CKS3486
6
7
8
9
10
Screw
Screw
Screw(M2×3)
Screw(M2×6)
Screw
BMZ20P030FZK
BSZ20P040FZK
CBA1077
CBA1489
CBA1243
11
12
13
14
15
Screw(M2×4)
Washer
Washer
Washer
Washer
16
17
18
19
20
Mark No.
46
47
48
49
50
Description
Sheet
Ball
Belt
Roller
Arm
Part No.
CNM6215
CNR1189
CNT1086
CNV4509
CNV5246
51
52
53
54
55
Arm
Arm
Arm
Guide
Guide
CNV5247
CNV5248
CNV5249
CNV5254
CNV5255
CBA1362
CBF1037
CBF1038
CBF1060
CBF1075
56
57
58
59
60
Gear
Gear
Guide
Damper
Arm
CNV5257
CNV5256
CNV5869
CNV5266
CNV5359
Spring
Spring
Spring
Spring
Spring
CBH2079
CBH2117
CBH2278
CBH2110
CBH2282
61
62
63
64
65
Arm
Arm
Guide
Guide
Holder
CNV5360
CNV5361
CNV5509
CNV5510
CNV5578
21
22
23
24
25
Spring
Spring
Spring
Spring
Spring
CBH2114
CBH2115
CBH2080
CBH2118
CBH2161
66
67
68
69
70
Guide
Clamper
Gear
Motor Unit(M1)
Screw Unit
CNV5751
CNV5758
CNV5813
CXB2190
CXB2191
26
27
28
29
30
Spring
Spring
Spring
Spring
Spring
CBH2163
CBH2189
CBH2249
CBH2260
CBH2262
71
72
73
74
75
Chassis Unit
Gear Unit
Arm Unit
Motor Unit(M2)
Lever Unit
CXB2192
CXB2193
CXB2194
CXB2195
CXB2553
31
32
33
34
35
Spring
Spring
Connector
Connector
Shaft
CBL1367
CBL1369
CDE5531
CDE5532
CLA3304
76
77
78
79
80
Arm Unit
Motor Unit(M3)
Arm Unit
Bracket Unit
Screw
CXB2554
CXB2562
CXB2795
CXB4071
JFZ20P025FMC
36
37
38
39
40
Screw(M2.6×6)
Frame
Frame
Lever
Arm
CBA1458
CNC7544
CNC7545
CNC7546
CNC7739
81
82
83
84
85
Screw
Washer
Pickup Unit(Service)(P8)
Screw
PCB
JGZ17P025FZK
YE15FUC
CXX1285
IMS26P030FMC
CNX2982
41
42
43
44
45
Bracket
Plate
Spacer
Sheet
Cushion
CNC7798
CNC8090
CNM3315
CNM6170
CNM6204
*
86 Photo-transistor(Q1, 2)
CPT230SX-TU
9
2
1
3
4
DEH-P8000R,P8050
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM
3.1 BLOCK DIAGRAM
A
A
TUNER AMP UNIT
B
FM/AM TUNER UNIT
ANT
GND2
FM/AM 1ST IF 10.7MHz
T51 Q51 CF51
CF52 CF53
FM FRONT END
Q3
CN451
1
FM MPX
25
27
24
32
2
39
42
44
46
63
RF TV
22
Q501
6
RDS
DECODER
46
VDD
24
fm/AM
70
54
MIXER.IF AMP DET
IC 1
PML002A
COMP
11
71
33 45
55 57
28
CF202
61 74
81
75
SYSTEM
CONTROLLER
IC 601(1/2)
PD5487A(/UC)
PD5488A(/ES)
12
/UC
X501
EEPROM
5
AM RF
6
AM 2ND IF 450kHz
49
4
IC 3
BR9010FV
97
3
94
FMSD
SL
SDBL
CE1
CK
3
2
4
2
1
SD
13
SL
8
SD2
CK
PDIO
Q401
12 15 16
CE1
22 10 14
PCE2
25
CE2
DI/DO
VCC
VDD
78
LOCL
B
POWER ON MUTE
10
Q101
IC 401
S-81250SGUP
SYS+B TUN5V
30
B.U
B.U
29
ASENBO
5
6
8
IC 101
CA008AM
5 BUS2
1
TX
2
RX
8
CN101
IP-BUS
CONNECTOR
7
IPPW
1 BUS1
42
7 BUS+L
43
11 BUS–L
44
41
40
36
E
MD
LD+
MD
37
CONTROL UNIT
LD
DAC
Q101
CN101
98
14
97
TO+
B+D/E
4
3
23
M
12
11
CN801
LOADING
MOTOR
2
3
M
TOP
SOP
9
BICK
CN701
IC 602
AK4321VF
AOUTL
AOUTR
18
17
6
17
8
15
SD/MD
TUNPCE2
PDIO
VST
VCK
VDT
LOCL
ASENBO
TX
RX
IPPW
IN3_L
IN4+_L
ELECTRICAL VO
SOURCE SELE
IN4–_L
IN2_L
IC 203
PML004AF
VREF
IN2_R
IN1_R
ROUT/DOUT
LRCK
SP601
ALARM
BUZZER
7
RF-AMP, DSP,
SERVO, DAC
16
Q641
24
PEE
LEVEL L
AGND/SCKO
ASENS
39
TELIN
HOME
DRSYS
DRSENS
S801
HOME
DRELAY
SINGLE-CD
CONTROLLER
14
FWD
REV
MUTE
1
58
28
57
21
55
CDLOAD
reset
1
2
1
VD
CONT
AVREF
60
ADENA
9
VDD
47
EJTSNS
CLAMP
V+5
CD5VON
S802
CLAMP
BMUTE
11
11
VDD
12
12
VD
21
2
22
1
Q998
VDD
4
IC 701
BA05SFP
IN
7
7
2
1
8
8
7
2
IC 601(2/2)
PD5487A(/UC)
PD5488A(/ES)
B.U
+5V REGULATOR
DSCSNS
VDCONT
D803 D802 D801
SYSPW
Q901
9
SYSTEM
CONTROLLER
B
10
CDEJET
IC 901
PE5011C
3
MUTE
2
2
Q991
1
31
48
59
13
10
20
3
Q851
BMUTE
DISC SENSE
F
TUNPCK
CN991
LOUT/LRCK
IC 201
UPD63710GC
CN802
2
TUNPCE
BSENS
4
SELECT
SENSE
SD_BW
TD/FD
SOM
COP
13 COM
10
LOP
9
LOM
1
M
34
DATA
SL
ISENS
FOP
CD DRIVER
17
CARRIAGE
MOTOR
7
X201
TOP
16
C
8
32
FOP
IC 301
BA5985FM
SPINDLE
MOTOR
LRCK
PD
30
A+C/F
24
FO+
DOUT
SCKO
HOLOGRAM
UNIT
FOCUS ACT
TRACKING ACT
LD
5
SD
IP-BUS DRIVER
Q102
PICKUP UNIT(SERVICE)
FM/AM
IC 501
PM4009A
20
21
65
35
Q201 Q204
19
IC 2 PM4008A
34 33 41 44 11
69
ANT2 TV
ANT1 TV
38
B.U
Q852
PHOTO UNIT
FLPPW
M951
AUTOMATIC
FLAP MOTOR
D
M
CN851
5
S951
CLOSE
S952
OPEN
BLUE
RED
WHITE
3
2
3
14
4
SWITCH
PCB
FLAP MOTOR
CONTROL
OUT1
OUT2
4
IC 851 FIN
BA6288FS FIN
26
FLPPW
Q853
5
DSENS
6
FLPOPN
34
11
FLPCLS
37
FLPCLS
FCLSSW
KYDT
FOPNSW
40
38
1
FCLSSW
DPDT
D
FLPILM
ALARM SENSOR
3
DOOR LOCK
2
CN681
MOTS1
DRLC1
Q684
MOSENS
5
DLSENS
6
MOSENS
OEL PW
DLSENS
SWVDD
10
2
3
3
1
4
4
Q685
ILMPW
1
3
FOPNSW
RESET
/ES
4
FLPOPN
4
4
4
5
7
6
8
DEH-P8000R,P8050
A
M
LLER
/2)
(/UC)
(/ES)
VST
VCK
VDT
B
Q911
VDD
B.U
Q913
B.U
BACKUP
1
BACKUP
2
GND
POWER AMP
LECTRICAL VOLUME/
OURCE SELECTOR
92
LEVEL L
10
FL
IC 203
PML004AF
12
IC 301
PAL005A
FL
14 RL
11
RL
9
PREL
MUTE
STBY
B.REM
22
4
25
23
RL–
21
RL+
3
FL–
5
FL+
SYSPW
B.REM
LEVEL L
ASENS
BSENS
ISENS
TELIN
DRSYS
DRSENS
DRELAY
SYSPW
IC 231
NJM2068MD
FL–
FL+
4
B.REM
ILL
3
ILL
5
ACC
8
MUTE
7
DOOR SW
Q931
3
asens
Q302
ACC
bsens
B.U
74
Q951
Q982
73
TELIN
TEL1
23
Q681
11
FRONT
L CH
7
86
7
76
11
SWL1
RLI
FLI
IC 271
PA2028A
22
Q353
9
FLO
RLO
14
Q355
2
ALARM
B.U
SUB
WOOFER
L CH
10
B.U
Q941
/UC
11
Q351
C
REAR
L CH
3
SWLO 18
Q683
Q682
DRSENS
16
Q261
SYSPW
DRSYS
6
HIGH OUT
2/2)
(/UC)
(/ES)
DOOR SW
B.U
CN351
87
M
LLER
MUTE
RL+
12
Q932
ILL
1
RL–
Q301 MUTE
LEVEL DET.
92
9
11
10
6
ALARM
DRELAY
Q942
27
Q921
DZF
Q923
SYS+B
B.U
MUTERQ
Q981
BMUTE
C
Q922
KEYBOARD UNIT
REMOTE CONTROL
SENSOR
CN1901
CN801
DSENS
47
12
1
IC 1903
RS-140
4
SWVDD
DSENS
97
DPDT
RESET
36
35
12
RESET
B
1
Q962
B.U
RESET
IC 961
S–80735ANDZI
2
9
4
8
5
33
34
VDD
6
7
2
11
11
2
OEL PW
43
IC 1902
PD8051A
ADRESS
S1925
KEY AND
OEL MODULE
CONTROLLER
KEY MATRIX
IC 1901
PD5471A
Q808
Q805
4
9
ILB
5
8
SWVDD
D
11
46
Q806
13
X1901
ILB
B.U
Q801
ILMPW
44
18 17
B.U
1-15
CN1902
Q802
Q807
SWVDD
25
DATA
DPDT
Q803
B.U
FLPILM
REM
KYDT
RST
VDD
SWVDD
DATA ROM
5
14
AVCC VDD
KYDT
OPT IN
1
OEL MODULE
MXK8002
45
11
5
6
7
8
2
1
3
4
DEH-P8000R,P8050
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)
Note: When ordering service parts, be sure to refer to “EXPLODED VIEWS AND PARTS LIST” or “ELECTRICAL PARTS
LIST”.
4
A
3
2
11 10
9
IP-BUS
A-a
A-b
CD,TUNER,IP-BUS SIGNAL
TUNER SIGNAL
IP-BUS SIGNAL
CD SIGNAL
1
6
7
5
8
A-a
E F
CD MECHANISM
MODULE
CN701
IP-BUS:+2.2dBs
Large size
SCH diagram
CD MECHANISM
A-a
A-b
Guide page
IP-BUS
DRIVER
Detailed page
R204 1K
A-a
A-b
R201 0R0
R203 1K
B
FM/AM TUNER UNIT
FM(100%):-19.5dBs
AM(30%):-30dBs
CD:+1
IP-BU
FM(10
AM(3
/UC
C
/ES
C433
100P
B
TUNER
EEPROM
AUTOMATIC FLAP
RDS DECODER
D
12
A F G
1
D
2
3
S951
CSN1012
M951
AUTOMATIC
FLAP MOTOR
CXM1085
OPEN
C
S952
CSN1022
CLOSE
/UC
SWITCH PCB
4
KEYB
5
7
6
8
DEH-P8000R,P8050
A-b
A
TUNER AMP UNIT
6
4
5
2
PRE OUT
R204 1K
3
1
R284
0R0
A
PRE OUT
/UC
/ES
E-VOL
CD:+7.8dBs
BMUTE
B
R659 0R0
CD:+18.3dBs
/UC
+1.7dBs
US:+2.2dBs
100%):-20.5dBs
30%):-31dBs
/UC
RESET
AMP
PD5487A(/UC)
PD5488A(/ES)
CEK1136
10A
BACK UP
C
GND
ILL
SYSTEM CONTROLLER
1K(1/2W)
1K(1/2W)
B REMOTE
ACC
0.5A
BUZZER
ALARM
CEK1014
DOOR SW
CELLULAR MUTE
RLFL-
VDD 5V
8V
REGULATOR
RL+
FL+
RRFRRR+
FR+
CD:+33.8dBs
SENSE
MUTE
TEL MUTE
GRILLE
ALARM SENSOR
DFS ALARM
DOOR LOCK
/ES
D
CN1901
BOARD UNIT
5
6
7
A
8
13
D
IP-BUS
7
3
14
A-a
1
6
8
1
5
IP-BUS
DRIVER
9
2
FM(100%):-19.5dBs
AM(30%):-30dBs
IP-BUS:+2.2dBs
/UC
CD,TUNER,IP-BUS SIGNAL
TUNER SIGNAL
IP-BUS SIGNAL
CD SIGNAL
CD MECHANISM
E F
CD MECHANISM
MODULE
CN701
B
11 10
4
R201 0R0
CD:+
2
3
3
2
2
R203 1K
R204 1K
CD:+1.7dBs
IP-BUS:+2.2dBs
FM(100%):-20.5dBs
AM(30%):-31dBs
E-VOL
1
1
M TUNER UNIT
A
A-a A-b
DEH-P8000R,P8050
3
4
C
4
6
7
EEPROM
/UC
RDS DECODER
OPEN
SWITCH PCB
C
A-a A-b
KEYBOARD UNIT
CN1901
SYSTEM CONTRO
PD5487A(/
PD5488A(/
7
D
M951
AUTOMATIC
FLAP MOTOR
CXM1085
AUTOMATIC FLAP
/ES
100P
C433
TUNER
CLOSE
S951
CSN1012
5
6
S952
CSN1022
5
DEH-P8000R,P8050
8
A-a D
8
15
A
B
C
FM/AM TU
B
D
2
BMUTE
C
3
RESET
R659 0R0
AMP
/UC
PRE OUT
/UC
TUNER AMP UNIT
/ES
CD:+18.3dBs
/UC
PRE OUT
3
3
CD:+7.8dBs
A
2
2
1
6
1
4
A-b
5
16
2
D
3
B
1
1
R284
0R0
A
A-a A-b
DEH-P8000R,P8050
4
4
5
BUZZER
6
DFS ALARM
MUTE
8V
REGULATOR
/ES
TEL MUTE
VDD 5V
SENSE
BACK UP
FR+
RR+
FR-
RR-
FL+
RL+
FL-
RL-
CELLULAR MUTE
DOOR SW
ALARM
ACC
B REMOTE
ILL
GND
7
A-a A-b
DOOR LOCK
ALARM SENSOR
CD:+33.8dBs
CEK1014
0.5A
1K(1/2W)
1K(1/2W)
CEK1136
10A
6
UNIT
CN1901
GRILLE
M CONTROLLER
PD5487A(/UC)
PD5488A(/ES)
AMP
5
7
DEH-P8000R,P8050
8
A-b
8
17
A
B
C
D
2
1
3
4
DEH-P8000R,P8050
3.3 FM/AM TUNER UNIT
A
A
B
Voltage of IC Terminals
Mark
None
F0
F65
F125
A0
A74
A125
Band
–
FM
FM
FM
AM
AM
AM
Input Level
–
0dBf
65dBf
125dBf
0dBµ
74dBµ
125dBµ
KV1410(23)
B
C
D
18
B
1
2
3
4
5
6
7
8
DEH-P8000R,P8050
KV1410(23)
A
B
C
D
5
6
7
B
8
19
1
2
3
4
DEH-P8000R,P8050
3.4 KEYBOARD UNIT
A
EQ-
S1901,1902:CSG1112
S1903,1904:CSG1111
S1905-1924:CSG1112
S1925:CSG1111
B
EQ+
VOL+
DISP
PGM
ENT
SOURCE
VOL-
5
3
2
1
CLOCK
LOUD
6
4
AUDIO
BAND
FUNC
EJECT
RESET
C
D
20
C
1
A
2
3
CN801
4
5
6
7
8
DEH-P8000R,P8050
A
C
KEYBOARD UNIT
B
C
D
5
6
7
C
8
21
2
1
3
4
DEH-P8000R,P8050
E
CONTROL UNIT
A
RF-AM
B
CN101
SWITCHES:
CONTROL UNIT
S801 : HOME SWITCH.....ON-OFF
S802 : CLAMP SWITCH....ON-OFF
The underlined indicates the switch position.
CD DRIVER
C
F
PHOTO UNIT
Q1 CPT230SX-TU Q2 CPT230SX-TU
CN802
SPINDLE MOTOR
M3 CXB2562
CN801
CARRIAGE MOTOR
M1 CXB2190
D
LOADING MOTOR
M2 CXB2195
5V REGULATOR
22
E F
1
2
3
4
5
7
6
8
DEH-P8000R,P8050
A
DAC
RF-AMP,SERVO,DSP,DAC
8.380MHz
B
CN991
C
CN701
A
SINGLE-CD CONTROLLER
D
5
6
7
E
8
23
DEH-P8000R,P8050
Note:1. The encircled numbers denote measuring pointes in the circuit diagram.
2. Reference voltage
REFO:2.5V
- Waveforms
1 RFI
0.5V/div. 0.5µs/div.
Normal mode: play
1 CH1: RFI
1V/div. 0.5ms/div.
2 CH2: MIRR
5V/div.
Test mode: Tracking open
1 CH1: RFI
1V/div.
0.5ms/div.
2 CH2: MIRR 5V/div.
Normal mode: The defect part
passes 800µm
REFO →
REFO →
REFO →
REFO →
REFO →
3 CH1: FD
0.5V/div.
0.2s/div.
4 CH2: FO+
2V/div.
Test mode: No disc, Focus close
3 CH1: FD
0.5V/div.
0.2s/div.
5 CH2: FOK
2V/div.
Normal mode: Focus close
6 CH1: FE
0.5V/div.
1ms/div.
7 CH2: XSI
2V/div.
Normal mode: Focus close
REFO →
REFO →
REFO →
REFO →
REFO →
REFO →
8 CH1: TE
0.5V/div. 0.5ms/div.
9 CH2: TD
0.5V/div.
Test mode: 32 tracks jump (REV)
8 CH1: TE
0.5V/div. 0.5ms/div.
9 CH2: TD
0.5V/div.
Test mode: Single jump (REV)
GND →
8 CH1: TE
0.5V/div.
5ms/div.
9 CH2: TD
0.5V/div.
Test mode: 100 tracks jump (REV)
REFO →
REFO →
REFO →
REFO →
REFO →
REFO →
6 CH1: FE
0.1V/div.
3 CH2: FD
0.2V/div.
Normal mode: Play
20ms/div.
3 CH1: FD
0.5V/div. 0.5s/div.
0 CH2: MD
1V/div.
Normal mode: Focus close (12cm)
3 CH1: FD
0.5V/div. 0.5s/div.
0 CH2: MD
1V/div.
Normal mode: Focus close (8cm)
REFO →
REFO →
REFO →
REFO →
REFO →
REFO →
24
DEH-P8000R,P8050
8 CH1: TE
0.2V/div.
9 CH2: TD
0.2V/div.
Normal mode: play
20ms/div.
REFO →
8 CH1: TE
0.5V/div.
5ms/div.
! CH2: SD
0.5V/div.
TEST mode: 100 Tracks jump(FWD)
0 MD
0.5V/div.
0.1s/div.
Normal mode: Play (12cm)
REFO →
REFO →
REFO →
REFO →
0 MD
1V/div.
Normal mode:
Long Search (12cm)
10ms/div.
@ EFM
1V/div.
5µs/div.
Normal mode: play
8 CH1: TE
1V/div.
2ms/div.
# CH2: TEC
1V/div.
Test mode: Focus close
Tracking open
REFO →
REFO →
REFO →
REFO →
GND →
8 CH1: TE
0.5V/div.
0.2s/div.
6 CH2: FE
0.5V/div.
Normal mode: AGC after focus close
$ PLCK
2V/div.
0.5µs/div.
Normal mode: play
% SCKO
2V/div.
1µs/div.
Normal mode: play
REFO →
REFO →
^ Dout
2V/div.
Normal mode: play
10µs/div.
REFO →
REFO →
GND →
GND →
& LRCK
2V/div.
Normal mode: play
20µs/div.
* VD
5V/div.
50ms/div.
Normal mode: No disc
GND →
REFO →
REFO →
GND →
GND →
25
DEH-P8000R,P8050
( CH1: R OUT 1V/div.
0.2ms/div.
) CH2: L OUT 1V/div.
Normal mode: Play (1kHz 0dB)
6 CH1: FE
0.2V/div.
1ms/div.
3 CH2: FD
0.5V/div.
Normal mode: During AGC
8 CH1: TE
0.2V/div.
1ms/div.
9 CH2: TD 0.5V/div.
Normal mode: During AGC
REFO →
REFO →
REFO →
REFO →
REFO →
REFO →
1 CH1: RFI
1V/div.
0.5ms/div.
⁄ CH2: HOLD 5V/div.
Normal mode: The defect part passes
800µm(B.D)
3 CH1: FD
1V/div.
0.5ms/div.
800µm(B.D)
9 CH1: TD
0.1V/div.
0.5ms/div.
800µm(B.D)
REFO →
REFO →
REFO →
REFO →
REFO →
REFO →
26
DEH-P8000R,P8050
27
2
1
3
4
DEH-P8000R,P8050
4. PCB CONNECTION DIAGRAM
CORD ASSY
MAIN ANTENNA
4.1 TUNER AMP UNIT
NOTE FOR PCB DIAGRAMS
A
1. The parts mounted on this PCB
include all necessary parts for
several destination.
For further information for
respective destinations, be sure
to check with the schematic diagram.
2. Viewpoint of PCB diagrams
Connector
Capacitor
SIDE A
P.C.Board
Chip Part
A
SIDE B
PRE OUT
TUNER AMP UNIT
B
C
E
CN701
D
28
A
1
M951
2
D
3
4
5
7
6
8
DEH-P8000R,P8050
B
SIDE A
A
IP-BUS IN
B
CORD ASSY
C
D
C
5
6
CN1901
7
A
8
29
1
2
3
4
2
3
4
DEH-P8000R,P8050
A
TUNER AMP UNIT
A
B
C
D
30
A
1
5
6
7
8
DEH-P8000R,P8050
SIDE B
A
B
C
D
5
6
7
A
8
31
2
1
3
4
DEH-P8000R,P8050
4.2 FM/AM TUNER UNIT
SIDE A
A
A
B
FM/AM TUNER UNIT
C
B
D
32
B
1
2
3
4
1
2
3
4
DEH-P8000R,P8050
SIDE B
A
B
FM/AM TUNER UNIT
C
B
D
1
2
3
B
4
33
2
1
3
4
DEH-P8000R,P8050
4.3 KEYBOARD UNIT
C
KEYBOARD UNIT
SIDE A
C
KEYBOARD UNIT
SIDE B
OEL MODULE
6
A
T.I
CN801
CLOCK
EJECT
BAND
FUNC
AUDIO
A
2
3
4
5
B
D
34
C
1
SOURCE
EQ-
RESET
VOL-
VOL+
EQ+
DISP
ENT
PGM
1
C
2
3
4
1
2
3
4
DEH-P8000R,P8050
4.4 SWITCH PCB
A
F
SWITCH PCB
BLUE
RED
WHITE
A
CN851
B
C
D
1
2
3
F
4
35
E
D
36
1
E F
F
A
E
CN802
F
2
2
3
3
3
2
1
CN991
M3 SPINDLE MOTOR
M1 CARRIAGE MOTOR
M2 LOADING MOTOR
1
PHOTO UNIT
REFO
C
EF
CONTROL UNIT
DEH-P8000R,P8050
4
SIDE A
A
B
4
1
3
2
4
DEH-P8000R,P8050
SIDE B
A
B
C
1
25
76
50
CONTROL UNIT
100
26
75
51
E
D
1
2
3
E
4
37
DEH-P8000R,P8050
5. ELECTRICAL PARTS LIST
NOTES:
- Parts whose parts numbers are omitted are subject to being not supplied.
- The part numbers shown below indicate chip components.
Chip Resistor
RS1/_S___J,RS1/__S___J
Chip Capacitor (except for CQS.....)
CKS....., CCS....., CSZS.....
=====Circuit Symbol and No.===Part Name
--- -----------------------------------------------
A
Part No.
-------------------------
Unit Number : CWM6222(DEH-P8000R/UC)
Unit Number : CWM6224(DEH-P8050/ES)
Unit Name
: Tuner Amp Unit
MISCELLANEOUS
--- -----------------------------------------------
Part No.
-------------------------
Q
Q
Q
Q
D
981
982
991
998
231
Transistor
Transistor
Transistor
Transistor
Diode Network
2SC2412K
2SC2412K
IMD2A
2SD2396
DA204U
IC
IC
IC
IC
IC
101
203
231
271
301
IC
IC
IC
IC
IC
CA0008AM
PML004AF
NJM2068MD
PA2028A
PAL005A
D
D
D
D
D
232
233
234
401
402
Diode Network
Diode Network
Diode Network
Diode
Diode
DA204U
DA204U
DA204U
1SR154-400
HZS16(2)
IC
IC
IC
IC
IC
401
501
601
851
961
IC
IC
IC
IC
IC
S-81250SGUP
See Contrast table
See Contrast table
BA6288FS
S-80735ANDZI
D
D
D
D
D
683
801
802
803
804
LED
Diode Network
Diode Network
Diode Network
Diode Network
BR4361F
DA204U
DA204U
DA204U
DA204U
Q
Q
Q
Q
Q
101
102
261
301
302
Transistor
Transistor
Transistor
Transistor
Transistor
2SA1162
DTC124EK
IMD2A
DTC124EK
DTC124EK
D
D
D
D
D
805
806
807
808
809
Diode
Diode
LED
LED
LED
MA3056(M)
HZS9L(C2)
CL170PGCD
CL170PGCD
CL170PGCD
Q
Q
Q
Q
Q
351
352
353
354
355
Transistor
Transistor
Transistor
Transistor
Transistor
2SC3326
2SC3326
2SC3326
2SC3326
See Contrast table
D
D
D
D
D
810
851
852
853
901
Diode
Diode
Diode
Diode
Diode
MA3062(M)
HZS7L(C3)
1SS133
1SS133
ERA15-02VH
Q
Q
Q
Q
Q
356
401
501
641
681
Transistor
Transistor
Transistor
Transistor
Transistor
See Contrast table
2SC2412K
See Contrast table
DTC114EK
2SA1162
D
D
D
D
D
902
903
911
912
921
Diode
Diode
Diode
Diode
Diode
ERA15-02VH
ERA15-02VH
ERA15-02VH
HZS6L(B1)
HZS9L(C1)
Q
Q
Q
Q
Q
682
683
684
685
801
Transistor
Transistor
Transistor
Transistor
Transistor
DTC124EK
2SC2412K
See Contrast table
See Contrast table
2SD1760F5
D
D
D
D
D
931
932
933
941
942
Diode
Diode
Diode
Diode
Diode
HZS7L(A1)
HZS7L(C3)
ERA15-02VH
ERA15-02VH
ERA15-02VH
Q
Q
Q
Q
Q
802
803
805
806
807
Transistor
Transistor
Transistor
Transistor
Transistor
IMD2A
2SD2396
2SC2412K
2SB1238
DTC143EK
D
D
D
D
D
951
961
981
982
983
Diode
Diode
Diode
Diode
Diode
MA152WK
MA152K
MA152WK
HZS9L(A2)
MA152K
Q
Q
Q
Q
Q
808
851
852
853
911
Transistor
Transistor
Transistor
Transistor
Transistor
IMD2A
2SD1760F5
DTA114EK
DTC124EK
2SD1760F5
D
D
D
ZNR
L
984
985
991
451
101
Diode
Diode
Diode
Inductor
MA152WK
1SS133
HZS9L(B1)
DSPS-201M-S00B
LAU3R3K
Q
Q
Q
Q
Q
913
921
922
923
931
Transistor
Transistor
Transistor
Transistor
Transistor
IMD2A
2SD2396
DTC114EK
2SB1238
IMX1
L
L
L
L
L
251
271
401
402
403
Ferri-Inductor
Ferri-Inductor
Ferri-Inductor
Inductor
Inductor
LAU2R2K
LAU101K
LAU2R2K
LCTB4R7K2125
CTF1420
Q
Q
Q
Q
Q
932
941
942
951
962
Transistor
Transistor
Transistor
Transistor
Transistor
DTC114EK
2SB1243
DTC124EK
2SA1162
2SC2412K
L
L
L
L
L
404
501
502
601
801
Inductor
Inductor
Inductor
Inductor
Inductor
LCTA1R0J3225
See Contrast table
See Contrast table
LAU100K
LAU100K
38
DEH-P8000R,P8050
--- -----------------------------------------------
Part No.
-------------------------
--- -----------------------------------------------
Part No.
-------------------------
L
L
X
X
SP
Inductor
Ferri-Inductor
Crystal Resonator 3.648MHz
Radiator 10.00MHz
Buzzer
CTF1484
LAU2R2K
See Contrast table
CSS1475
CPV1012
R
R
R
R
R
371
372
373
374
375
RS1/16S471J
RS1/16S471J
See Contrast table
See Contrast table
RS1/10S0R0J
FM/AM Tuner Unit
CWE1501
R
R
R
R
R
376
377
401
402
403
RS1/10S0R0J
See Contrast table
RS1/10S473J
RS1/10S473J
RS1/10S681J
R
R
R
R
R
404
409
410
411
412
RS1/10S681J
RS1/16S681J
RS1/16S103J
RS1/16S681J
RS1/16S681J
R
R
R
R
R
413
414
415
416
417
RS1/16S681J
RS1/16S473J
RS1/16S472J
RS1/16S473J
RS1/16S473J
R
R
R
R
R
418
419
420
423
424
RS1/10S473J
RS1/10S222J
RS1/10S222J
RS1/10S0R0J
RS1/16S393J
R
R
R
R
R
431
501
502
503
507
RS1/8S151J
See Contrast table
See Contrast table
See Contrast table
See Contrast table
R
R
R
R
R
508
511
512
513
514
See Contrast table
See Contrast table
See Contrast table
See Contrast table
See Contrast table
R
R
R
R
R
518
591
592
601
602
See Contrast table
RS1/16S473J
RS1/16S102J
RS1/16S473J
RS1/16S472J
R
R
R
R
R
603
604
605
606
607
RS1/16S221J
RS1/16S682J
RS1/16S221J
RS1/16S682J
RS1/16S102J
R
R
R
R
R
608
609
610
611
614
RS1/16S102J
RS1/16S473J
RS1/16S473J
RS1/16S473J
RS1/16S221J
R
R
R
R
R
615
616
617
618
619
RS1/16S682J
RS1/16S221J
RS1/16S473J
RS1/16S221J
RS1/16S682J
R
R
R
R
R
620
623
627
628
633
RS1/16S473J
RS1/16S473J
RS1/16S473J
RS1/16S473J
RS1/10S0R0J
R
R
R
R
R
634
637
641
642
654
RS1/10S102J
RS1/16S473J
RS1/10S202J
RS1/10S102J
RS1/10S0R0J
802
951
501
601
641
RESISTORS
R
R
R
R
R
101
102
103
104
105
RS1/10S101J
RS1/10S620J
RS1/10S101J
RS1/10S222J
RS1/10S103J
R
R
R
R
R
106
107
108
109
110
RS1/10S562J
RS1/10S332J
RS1/16S102J
RS1/16S102J
RS1/16S223J
R
R
R
R
R
111
112
113
151
152
RS1/16S223J
RS1/16S181J
RS1/16S181J
RS1/10S0R0J
RS1/10S0R0J
R
R
R
R
R
161
162
163
164
201
RS1/16S272J
RS1/16S272J
RS1/16S162J
RS1/16S162J
RS1/10S0R0J
R
R
R
R
R
203
204
205
231
232
RS1/10S102J
RS1/10S102J
RA3C102J
RS1/10S474J
RS1/10S474J
R
R
R
R
R
233
234
235
236
283
RS1/10S104J
RS1/10S104J
RS1/10S273J
RS1/10S273J
RS1/10S203J
R
R
R
R
R
284
301
302
303
304
RS1/10S0R0J
RS1/10S103J
RS1/10S103J
RS1/10S103J
RS1/10S331J
R
R
R
R
R
351
352
353
354
355
RS1/10S820J
RS1/10S820J
RS1/10S820J
RS1/10S820J
See Contrast table
R
R
R
R
R
356
357
358
359
360
See Contrast table
RS1/16S223J
RS1/16S223J
RS1/16S223J
RS1/16S223J
R
R
R
R
R
361
362
363
364
365
See Contrast table
See Contrast table
RS1/16S103J
RS1/16S103J
RS1/16S103J
R
R
R
R
R
366
367
368
369
370
RS1/16S103J
See Contrast table
See Contrast table
RS1/16S471J
RS1/16S471J
39
DEH-P8000R,P8050
--- -----------------------------------------------
Part No.
-------------------------
--- -----------------------------------------------
Part No.
-------------------------
R
R
R
R
R
655
656
658
659
681
RS1/10S0R0J
RS1/10S0R0J
RS1/16S473J
RS1/16S0R0J
RS1/8S102J
R
R
R
R
R
953
954
962
963
964
RS1/10S472J
RS1/16S102J
RS1/10S102J
RS1/10S473J
RS1/10S822J
R
R
R
R
R
682
683
685
686
687
See Contrast table
See Contrast table
See Contrast table
RS1/10S103J
RS1/10S223J
R
R
R
R
R
981
982
983
984
985
RS1/16S223J
RS1/10S473J
RS1/10S103J
RS1/10S473J
RS1/10S102J
R
R
R
R
R
688
689
690
691
692
RS1/10S223J
RS1/10S223J
RS1/10S272J
See Contrast table
See Contrast table
R
R
R
R
986
989
991
992
RS1/10S224J
RS1/10S473J
RD1/4PU221J
RS1/10S221J
R
R
R
R
R
693
694
695
696
697
See Contrast table
See Contrast table
RS1/16S473J
See Contrast table
See Contrast table
CAPACITORS
R
R
R
R
R
698
699
700
801
802
RS1/8S471J
RS1/10S102J
RS1/10S103J
RS1/8S222J
RS1/8S222J
R
R
R
R
R
803
804
805
806
807
RS1/8S222J
RS1/8S103J
RS1/8S472J
RS2PMF220J
RS1/8S221J
R
R
R
R
R
809
810
811
812
813
RS1/10S103J
RS1/10S222J
RD1/4PU102J
RS1/10S152J
RS1/4S221J
R
R
R
R
R
814
818
819
820
821
RD1/4PU391J
RS1/10S103J
RS1/8S221J
RS1/10S1R0J
RS1/10S1R0J
R
R
R
R
R
851
852
853
862
864
RD1/4PU271J
RS1/10S102J
RS1/10S102J
RS1/10S102J
RS1/10S102J
R
R
R
R
R
911
912
913
914
921
RS1/10S0R0J
RS1/10S152J
RS1/10S512J
RS1/10S1R0J
RS1/10S1R0J
R
R
R
R
R
922
923
924
926
931
RD1/4PU221J
RS1/10S102J
RS1/4S152J
RS1/10S223J
RS1/10S472J
R
R
R
R
R
932
933
934
935
936
RS1/10S473J
RS1/10S103J
RS1/10S473J
RS1/10S103J
RS1/10S103J
R
R
R
R
R
941
942
943
951
952
RS1/10S472J
RS1/4S221J
RS1/4S221J
RS1/8S153J
RS1/10S472J
40
C
C
C
C
C
101
102
161
162
171
CKSQYB104K16
CKSQYB104K16
CKSQYB183K25
CKSQYB183K25
CEJA470M16
C
C
C
C
C
172
173
203
204
205
CKSQYB104K16
CEJA100M16
CKSYB225K16
CKSYB225K16
CKSYB224K16
C
C
C
C
C
206
207
208
209
210
CKSYB224K16
CKSYB105K16
CKSYB105K16
CKSYB105K16
CKSYB105K16
C
C
C
C
C
211
212
213
214
215
CEJANP4R7M16
CEJANP4R7M16
CEJANP4R7M16
CEJANP4R7M16
CKSQYB473K50
C
C
C
C
C
216
217
218
219
220
CKSQYB473K50
CKSQYB473K50
CKSQYB473K50
CKSYB105K16
CKSYB105K16
C
C
C
C
C
221
222
223
224
225
CKSYB105K16
CKSYB105K16
CKSYB105K16
CKSYB105K16
CKSQYB333K50
C
C
C
C
C
226
227
228
229
231
CKSQYB123K50
CKSQYB473K50
CKSQYB153K50
CKSQYB153K50
CKSQYB103K50
C
C
C
C
C
233
234
235
236
237
CKSQYB474K16
CKSQYB474K16
CKSQYB104K16
CKSQYB104K16
CKSQYB104K25
C
C
C
C
C
238
239
240
241
242
CKSQYB104K25
CCSQCH470J50
CCSQCH470J50
CKSQYB152K50
CKSQYB152K50
C
C
C
C
C
262
277
278
279
280
CKSYB475K10
CEJA4R7M35
CEJA101M16
CEJA100M16
CEJA100M16
DEH-P8000R,P8050
--- -----------------------------------------------
Part No.
-------------------------
--- -----------------------------------------------
Part No.
-------------------------
C
C
C
C
C
281
282
283
286
287
CKSYB225K16
CEJA330M25
CEJA330M25
CASAQ3R3M16
CKSYB684K25
C
C
C
C
C
807
808
809
810
811
CKSQYB102K50
CKSYB221K50
CKSYB103K50
CKSYB475K10
CKSYB225K16
C
C
C
C
C
301
302
303
304
306
CKSQYB224K16
CKSQYB224K16
CKSQYB224K16
CKSQYB224K16
CEJA330M10
C
C
C
C
C
812
813
814
851
852
CCSCH101J50
CKSQYB103K50
CKSQYB105K10
CKSQYB103K50
CKSYB104K16
C
C
C
C
C
307
309
310
311
351
CCH1339
CKSQYB104K16
CEJA100M16
CKSYB105K16
CEJA100M35
C
C
C
C
C
853
855
856
857
901
CEJA220M16
CKSQYB102K50
CCSQCH101J50
CCSQCH101J50
CKSYB103K50
C
C
C
C
C
352
353
354
355
356
CEJA100M35
CEJA100M35
CEJA100M35
See Contrast table
See Contrast table
C
C
C
C
C
911
912
913
914
915
470µF/16V
C
C
C
C
C
357
358
359
360
361
CKSRYB222K50
CKSRYB222K50
CKSRYB222K50
CKSRYB222K50
See Contrast table
C
C
C
C
C
921
922
923
931
951
330µF/10V
C
C
C
C
C
362
403
404
405
406
See Contrast table
CKSQYB473K16
CEJA101M10
CKSQYB103K50
CEJA220M10
C
C
C
C
C
961
962
963
981
991
CKSQYB102K50
CKSQYB104K16
CEJA2R2M50
CEJA220M16
CKSQYB473K50
C
C
C
C
C
407
408
409
411
413
CKSQYB103K50
CKSQYB223K50
CKSQYB223K50
CKSRYB472K50
See Contrast table
C
C
992
993
CKSQYB102K50
CEJA101M10
C
C
C
C
C
431
432
433
435
502
CEJA101M16
CKSQYB104K16
See Contrast table
CCSQCH101J50
See Contrast table
C
C
C
C
C
503
504
505
506
507
See Contrast table
See Contrast table
See Contrast table
See Contrast table
See Contrast table
C
C
C
C
C
508
509
511
512
601
See Contrast table
See Contrast table
See Contrast table
See Contrast table
CEJA4R7M35
C
C
C
C
C
602
603
604
605
651
CKSQYB103K50
CCSQCH101J50
CCSQCH150J50
CCSQCH220J50
CKSYB225K16
C
C
C
C
C
683
684
685
686
801
CKSQYB103K50
See Contrast table
See Contrast table
CKSQYB473K16
CKSYB475K10
C
C
C
C
C
802
803
804
805
806
CKSQYB104K16
CEJA470M10
CKSQYB103K50
CEJA470M10
CKSQYB103K50
470µF/16
470µF/16V
CCH1183
CKSQYB472K50
CKSQYB103K50
CEJA470M10
CCH1183
CCH1181
CKSQYB103K50
CEJA101M16
CKSYB105K16
CKSYB103K50
41
DEH-P8000R,P8050
CONTRAST TABLE of TUNER AMP UNIT
DEH-P8000R/UC and DEH-P8050/ES are constructed same except for the following:
Part No.
Symbol and Description
IC501
IC
IC601
IC
Q355,356
Transistor
Q501
Transistor
Q684,685
Transistor
DEH-P8000R/UC
PM4009A
PD5487A
2SC3326
DTA124EK
Not used
DEH-P8050/ES
Not used
PD5488A
Not used
Not used
2SC2412K
L501
L502
X501
R355,356
R361,362
CTF1295
CTF1420
CSS1447
RS1/10S820J
RS1/16S223J
Not used
Not used
Not used
Not used
Not used
R367,368
R373,374
R377,514
R501,502,503,511
R507
RS1/16S103J
RS1/16S471J
RS1/10S0R0J
RS1/16S102J
RS1/10S0R0J
Not used
Not used
Not used
Not used
Not used
R508,512
R513
R518
R682,683
R685
RS1/16S0R0J
RS1/16S225J
RS1/16S681J
Not used
Not used
Not used
Not used
Not used
RS1/8S102J
RS1/10S103J
R691,693
R692,694
R696,697
C355,356
C361,362
Not used
Not used
Not used
CEJA100M35
CKSRYB222K50
RS1/10S223J
RS1/10S272J
RS1/16S473J
Not used
Not used
C413,511
C433
C502
C503,504
C505
CKSQYB103K50
Not used
CCSQCH101J50
CCSQCH270J50
CKSQYB104K16
Not used
CCSQCH101J50
Not used
Not used
Not used
C506,507
C508
C509
C512
C684,685
CKSQYB471K50
CKSQYB104K16
CEJA220M6R3
CCSRCH101J50
Not used
Not used
Not used
Not used
Not used
CKSQYB103K50
42
Inductor
Inductor
DEH-P8000R,P8050
--- -----------------------------------------------
B
Part No.
-------------------------
Unit Number : CWE1501
Unit Name
: FM/AM Tuner Unit
MISCELLANEOUS
IC
IC
IC
Q
Q
1
2
3
1
2
IC
IC
IC
Transistor
Transistor
PML002A
PM4008A
BR9010FV
2SC4081
DTC124EU
Q
Q
Q
Q
Q
3
51
201
202
204
FET
Transistor
FET
Transistor
Transistor
3SK263
2SC4081
2SK932
DTC124EU
2SC4081
D
D
D
D
D
1
2
6
201
202
Diode
Diode
Diode
Diode
Diode
KV1410(23)
1SV248
KV1410(23)
MA143
MA147
D
D
L
L
L
903
904
1
3
4
Diode
Diode
Coil
Inductor
Coil
KV1410(23)
SVC253
CTC1155
LCTB1R5K2125
CTC1155
L
L
L
L
L
201
202
203
901
902
Inductor
Inductor
Inductor
Coil
Inductor
LCTB330K1608
CTF1287
LCTA121J3225
CTC1154
LCTA3R3J3225
L
L
T
CF
CF
904
905
51
51
52
Inductor
Inductor
Coil
Ceramic Filter
Ceramic Filter
LCTBR47K1608
LCTBR47K1608
CTE1132
CTF1442
CTF1442
CF
CF
X
53
202
901
Ceramic Filter
Ceramic Filter
CTF1442
CTF1476
CSS1432
RESISTORS
R
R
R
R
R
1
2
5
7
8
RS1/16S183J
RS1/16S103J
RS1/16S0R0J
RS1/16S273J
RS1/16S473J
R
R
R
R
R
9
10
11
12
13
RS1/16S223J
RS1/16S473J
RS1/16S221J
RS1/16S103J
RS1/16S104J
R
R
R
R
R
16
17
18
19
20
RS1/16S223J
RS1/16S221J
RS1/16S221J
RS1/16S473J
RS1/16S470J
R
R
R
R
R
31
51
52
53
54
RS1/16S0R0J
RS1/16S470J
RS1/16S103J
RS1/16S103J
RS1/16S331J
R
R
R
R
R
55
56
57
58
59
RS1/16S331J
RS1/16S560J
RS1/16S560J
RS1/16S102J
RS1/16S225J
R
R
R
R
R
60
61
101
102
103
RS1/16S133J
RS1/16S433J
RS1/16S333J
RS1/16S103J
RS1/16S333J
--- -----------------------------------------------
Part No.
-------------------------
R
R
R
R
R
104
106
108
110
111
RS1/16S562J
RS1/16S0R0J
RS1/16S0R0J
RS1/16S154J
RS1/16S273J
R
R
R
R
R
113
114
115
116
202
RS1/16S222J
RS1/16S333J
RS1/16S334J
RS1/16S473J
RS1/16S472J
R
R
R
R
R
203
204
205
206
208
RS1/16S225J
RS1/16S102J
RS1/16S220J
RS1/16S471J
RS1/16S104J
R
R
R
R
R
209
210
213
902
904
RS1/16S104J
RS1/16S563J
RS1/16S223J
RS1/16S103J
RS1/16S473J
R
R
R
R
907
908
909
914
RS1/16S103J
RS1/16S681J
RS1/16S473J
RS1/16S562J
CAPACITORS
C
C
C
C
C
1
6
8
10
11
CCSQCH4R0C50
CKSQYB105K10
CKSRYB222K50
CCSRCH220J50
CCSRCH150J50
C
C
C
C
C
12
14
15
16
17
CCSRCH8R0D50
CCSRCJ3R0C50
CKSRYB103K50
CKSRYB222K50
CKSRYB222K50
C
C
C
C
C
18
19
20
21
24
CCSRCJ3R0C50
CKSRYB103K50
CKSRYB103K50
CKSRYB103K50
CKSQYB334K16
C
C
C
C
C
26
30
32
35
51
CKSRYB472K50
CCSRCH220J50
CCSRCH470J50
CKSRYB103K50
CKSRYB103K50
C
C
C
C
C
52
53
54
55
56
CKSRYB473K16
CCSRCK2R0C50
CKSRYB103K50
CKSRYB104K16
CKSRYB104K16
C
C
C
C
C
58
101
102
103
105
CKSQYB224K16
CEALNP100M10
CCSRCH151J50
CKSRYB473K16
CKSRYB682K25
C
C
C
C
C
106
107
108
109
110
CEALR68M50
CKSRYB103K50
CKSQYB474K16
CKSQYB474K16
CKSRYB104K16
C
C
C
C
C
111
112
113
114
115
CKSRYB104K16
CKSRYB104K16
CKSRYB123K25
CEAL220M6R3
CKSRYB473K16
43
DEH-P8000R,P8050
--- -----------------------------------------------
Part No.
-------------------------
--- -----------------------------------------------
Part No.
-------------------------
C
C
C
C
C
116
117
120
121
122
CEAL2R2M50
CKSRYB102K50
CKSRYB183K25
CKSRYB332K50
CKSRYB562K25
L
L
L
L
L
1904
1905
1906
1907
1908
Inductor
Inductor Array
Inductor Array
Inductor
Inductor
LCTA220J2520
CTF1421
CTF1421
CTF1295
CTF1295
C
C
C
C
C
123
125
126
127
128
CKSRYB681K50
CKSRYB103K50
CKSRYB103K50
CEAL2R2M50
CKSRYB103K50
X
S
S
S
S
1901
1901
1902
1903
1904
Ceramic Resonator 15.62MHz
Push Switch
Push Switch
Push Switch
Push Switch
CSS1458
CSG1112
CSG1112
CSG1111
CSG1111
C
C
C
C
C
201
202
203
204
205
CCSRCH471J50
CCSRCH100D50
CKSRYB104K16
CKSRYB332K50
CKSRYB103K50
S
S
S
S
S
1905
1906
1907
1908
1909
Push Switch
Push Switch
Push Switch
Push Switch
Push Switch
CSG1112
CSG1112
CSG1112
CSG1112
CSG1112
C
C
C
C
C
206
207
208
209
210
CKSRYB104K16
CKSRYB473K16
CCSRCH560J50
CEAL470M6R3
CKSRYB103K50
S
S
S
S
S
1910
1911
1912
1913
1914
Push Switch
Push Switch
Push Switch
Push Switch
Push Switch
CSG1112
CSG1112
CSG1112
CSG1112
CSG1112
C
C
C
C
C
211
212
215
216
217
CKSRYB103K50
CCSRCH101J50
CKSRYB223K25
CKSQYB334K16
CKSRYB103K50
S
S
S
S
S
1915
1916
1917
1918
1919
Push Switch
Push Switch
Push Switch
Push Switch
Push Switch
CSG1112
CSG1112
CSG1112
CSG1112
CSG1112
C
C
C
C
C
219
220
221
222
223
CKSQYB105K10
CKSRYB104K16
CKSRYB473K16
CKSQYB334K16
CKSQYB474K16
S
S
S
S
S
1920
1921
1922
1923
1924
Push Switch
Push Switch
Push Switch
Push Switch
Push Switch
CSG1112
CSG1112
CSG1112
CSG1112
CSG1112
C
C
C
C
C
224
225
226
902
904
CKSRYB104K16
CKSRYB272K50
CKSRYB682K25
CCSRCH270J50
CKSRYB223K25
S
1925
Push Switch
CSG1111
C
C
C
C
C
905
906
907
909
910
CKSRYB103K50
CCSRTH100D50
CCSRTH150J50
CCSRTH100D50
CKSRYB332K50
C
C
C
C
C
912
913
914
915
916
CKSQYB474K16
CKSRYB223K25
CKSRYB682K25
CKSQYB223K25
CKSQYB474K16
C
C
C
C
C
917
918
919
920
921
CKSYB475K10
CKSRYB223K25
CKSQYB225K10
CCSRCH270J50
CCSRCH270J50
C
C
922
923
CKSYB105K16
CKSRYB103K50
C
Unit Number : CWM6226
Unit Name
: Keyboard Unit
MISCELLANEOUS
IC
IC
IC
D
D
1901
1902
1903
1901
1902
IC
IC
HIC Module
Diode Network
Diode Network
PD5471A
PD8051A
RS-140
DA204U
DA204U
D
D
L
L
L
1904
1905
1901
1902
1903
Diode
LED
Chip Inductor
Chip Inductor
Inductor
MA110
CL170UBX
LCTA2R2J3225
LCTA2R2J3225
CTF1484
44
RESISTORS
R
R
R
R
R
1901
1902
1903
1904
1905
RS1/16S154J
RS1/16S473J
RA4C101J
RA3C101J
RA3C101J
R
R
R
R
R
1906
1907
1908
1909
1910
RA4C101J
RS1/16S473J
RA3C101J
RA3C101J
RA4C101J
R
R
R
R
R
1911
1912
1913
1914
1915
RA4C101J
RA4C101J
RA3C101J
RA4C101J
RA4C101J
R
R
R
R
R
1922
1923
1924
1925
1930
RS1/10S121J
RS1/10S2R2J
RS1/8S222J
RS1/8S222J
RS1/16S472J
R
R
R
R
R
1931
1956
1957
1958
1959
RS1/16S473J
RS1/10S0R0J
RS1/10S0R0J
RS1/10S0R0J
RS1/10S0R0J
R
R
R
R
R
1960
1961
1962
1963
1964
RS1/8S911J
RS1/8S911J
RS1/10S511J
RS1/10S511J
RS1/10S511J
R
R
R
R
R
1965
1966
1967
1968
1969
RS1/10S511J
RS1/8S511J
RS1/8S511J
RS1/8S511J
RS1/8S511J
DEH-P8000R,P8050
--- -----------------------------------------------
Part No.
-------------------------
--- -----------------------------------------------
Part No.
-------------------------
R
R
R
R
R
1970
1971
1972
1973
1974
RS1/8S511J
RS1/8S511J
RS1/8S511J
RS1/8S511J
RS1/8S751J
R
R
R
R
R
503
504
505
506
511
RS1/16S681J
RS1/16S681J
RS1/16S681J
RS1/16S681J
RS1/16S0R0J
R
R
R
1975
1976
1977
RS1/8S751J
RS1/8S751J
RS1/8S751J
R
R
R
R
R
601
602
603
604
606
RS1/16S102J
RS1/16S102J
RS1/16S223J
RS1/16S223J
RS1/16S0R0J
CAPACITORS
C
C
C
C
C
1901
1902
1903
1904
1906
CKSQYB105K10
CKSRYB103K25
CSZS100M6R3
CSZS100M6R3
CKSQYB103K25
R
R
R
R
R
607
612
801
802
901
RS1/16S0R0J
RA4C0R0J
RS1/8S751J
RS1/8S751J
RS1/16S222J
C
C
C
C
C
1907
1908
1911
1914
1916
CSZS100M6R3
CKSRYB473K16
CKSRYB473K16
CKSRYB103K25
CKSQYB104K25
R
R
R
R
R
902
903
904
905
906
RS1/16S473J
RS1/16S222J
RS1/16S473J
RN1/16SE1502D
RS1/16S473J
C
C
C
1917
1918
1919
CSZSR100M16
CKSRYB102K50
CCSQCH221J50
R
R
R
R
R
908
909
910
911
912
RS1/16S222J
RS1/16S104J
RS1/16S103J
RS1/16S223J
RS1/16S473J
R
917
RS1/16S0R0J
D
S
S
E
Unit Number :
Unit Name
: Switch PCB
951
952
Switch(CLOSE)
Switch(OPEN)
CSN1012
CSN1022
Unit Number : CWX2358
Unit Name
: Control Unit
MISCELLANEOUS
IC
IC
IC
IC
IC
201
301
602
701
901
IC
IC
IC
IC
IC
UPD63710GC
BA5985FM
AK4321VF
BA05SFP
PE5011C
Q
Q
D
D
TH
101
901
801
802
901
Transistor
Transistor
LED
LED
Thermistor
2SB1132
UN2111
CL200IRX
CL200IRX
CCX1037
X
X
S
S
201
901
801
802
Ceramic Oscillator 16.934MHz
Radiator 8.380MHz
Spring Switch(HOME)
Spring Switch(CLAMP)
CSS1456
CSS1453
CSN1051
CSN1052
RESISTORS
R
R
R
R
R
101
102
103
201
205
RS1/8S120J
RS1/8S100J
RS1/16S222J
RS1/16S104J
RS1/16S103J
R
R
R
R
R
206
207
208
210
212
RS1/16S393J
RS1/16S182J
RS1/16S304J
RS1/16S0R0J
RS1/16S103J
R
R
R
R
R
213
214
215
216
217
RS1/16S103J
RS1/16S123J
RS1/16S273J
RS1/16S273J
RS1/16S681J
R
R
R
R
R
218
309
310
501
502
RS1/16S681J
RS1/16S473J
RS1/16S473J
RS1/16S102J
RS1/16S681J
CAPACITORS
C
C
C
C
C
101
102
103
104
105
CCSRCH102J25
CKSQYB104K16
CEV101M6R3
CEV470M6R3
CKSQYB334K16
C
C
C
C
C
106
107
201
202
203
CKSQYB334K16
CKSQYB334K16
CKSQYB104K16
CEV101M6R3
CKSQYB104K16
C
C
C
C
C
204
205
206
207
208
CKSRYB332K50
CKSQYB104K16
CKSRYB392K50
CKSQYB224K16
CCSRCH270J50
C
C
C
C
C
209
210
211
212
213
CCSRCJ3R0C50
CCSRCH221J50
CCSRCH101J50
CKSRYB682K25
CKSQYB104K16
C
C
C
C
C
214
215
216
217
218
CKSRYB104K16
CKSQYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
C
C
C
C
C
219
220
223
301
601
CKSRYB104K16
CKSRYB104K16
CKSQYB471K50
CEV101M10
CEV4R7M35
C
C
C
C
C
602
603
604
605
606
CEV4R7M35
CCSQSL152J50
CCSQSL152J50
CEV470M6R3
CKSRYB104K16
C
C
C
C
C
607
608
609
610
612
CKSRYB104K16
CKSRYB104K16
CEV100M16
CKSRYB104K16
CKSRYB104K16
45
DEH-P8000R,P8050
--- -----------------------------------------------
Part No.
-------------------------
C
C
C
C
C
701
702
703
801
802
CEV101M6R3
CCH1300
CKSQYB334K16
CKSRYB103K25
CKSRYB103K25
C
C
C
901
902
903
F
Q
Q
22µF/6.3V
CKSRYB472K50
CKSYB475K10
CKSRYB103K25
Unit Number :
Unit Name
: Photo Unit
1
2
Photo-transistor
Photo-transistor
CPT230SX-TU
CPT230SX-TU
Miscellaneous Parts List
M
M
M
M
46
1
2
3
951
Pickup Unit(Service)(P8)
Motor Unit(CARRIAGE)
Motor Unit(LOADING)
Motor Unit(SPINDLE)
Motor (AUTO FLAP)
CXX1285
CXB2190
CXB2195
CXB2562
CXM1085
DEH-P8000R,P8050
6. ADJUSTMENT
6.1 CD ADJUSTMENT
1) Precautions
• This unit uses a single power supply (+5V) for the regulator. The signal reference potential, therefore, is
connected to REFO(approx. 2.5V) instead of GND.
If REFO and GND are connected to each other by mistake during adjustments, not only will it be impossible to measure the potential correctly, but the servo
will malfunction and a severe shock will be applied to
the pick-up. To avoid this, take special note of the following.
Do not connect the negative probe of the measuring
equipment to REFO and GND together. It is especially
important not to connect the channel 1 negative
probe of the oscilloscope to REFO with the channel 2
negative probe connected to GND.
Since the frame of the measuring instrument is usually at the same potential as the negative probe, change
the frame of the measuring instrument to floating status.
If by accident REFO comes in contact with GND,
immediately switch the regulator or power OFF.
• Always make sure the regulator is OFF when connecting and disconnecting the various filters and wiring
required for measurements.
2) Test Mode
This mode is used for adjusting the CD mechanism
module of the device.
• Test mode starting procedure
Reset while pressing the 4 and 6 keys together.
• Test mode cancellation
Switch ACC, back-up OFF.
• After pressing the EJECT key, do not press any other
key until the disk is completely ejected.
• If the ] or [ key is pressed while focus search is in
progress, immediately turn the power off (otherwise
the actuator may be damaged due to adhesion of the
lenses).
• Jump operation of TRs other than 100TR continues
after releasing the key. CRG move and 100TR jump
operations are brought into the “Tracking close” status when the key is released.
• Powering Off/On resets the jump mode to “Single TR
(91)”, the RF AMP gain setting to 0 dB, and the automatic adjustment value to the initial value.
• Before proceeding to further adjustments and measurements after switching regulator ON, let the player
run for about one minute to allow the circuits to stabilize.
• Since the protective systems in the unit's software are
rendered inoperative in test mode, be very careful to
avoid mechanical and /or electrical shocks to the system when making adjustment.
• Disc detection during loading and eject operations is
performed by means of a photo transistor in this
unit.Consequently, if the inside of the unit is exposed
to a strong light source when the outer casing is
removed for repairs or adjustment, the following malfunctions may occur.
*During PLAY, even if the eject button is
pressed,the disc will not be ejected and the unit
will remain in the PLAY mode.
*The unit will not load a disc.
When the unit malfunctions this way, either re-position the light source, move the unit or cover the photo
transistor.
47
DEH-P8000R,P8050
- Flow Chart
4
6
Test Mode In
Reset
SOURCE
Sourse CD
New test mode
BAND
TRK
MIN
6
*1
Power ON
(Adjustment for T.Offset)
Power ON
(Not adjustment for T.Offset)
SEC
00 00 00
Display
2
3
TRK
Display
MIN
SEC
RF AMP Gain Select
TRK
99 99 99
MIN
SEC
GG GG GG
Power OFF
BAND
3
TRK
MIN
SEC
TRK
Display
<Tracking Servo Close>
MIN
[
*8
*2
Focus Mode
Select
91 91 91
Display
]
1
6
Focus Close/
S Curve Check
TRK
SEC
0x 0x 0x
MIN
CRG+
SEC
TRK
00 00 00
MIN
MIN
SEC
TRK
MIN
TRK
99 99 99
MIN
SEC
00 00 00
or
SEC
*3
Auto Adjustment
Display Select
CRG-
00 00 00
or
TRK
2
*8
or
SEC
TRK
99 99 99
MIN
SEC
99 99 99
Power OFF
3
]
[
2
RF AGC Coefficient Display/
Rough Servo and RF AGC
CRG+
CRG-
T.Balance
Adjustment
6
1
BAND
T.Close and
F,T AGC and
RF AGC and
Fit Servo
T. Close and
Fit Servo
TRK
Display
MIN
TRK
SEC
MIN
or
or
TRK
MIN
SEC
8x 8x 8x
8x 8x 8x
TRK
SEC
MIN
SEC
9x 9x 9x
9x 9x 9x
Tracking
Open
Power OFF
*7
*5
F, T, RF AGC/
F.Bias Display Select
F, T AGC and
RF AGC
[
]
6
3
1
BAND
CRG/TR Jump NO.
Select
2
*4 CRG-/TR Jump- *4
CRG+/TR Jump+
*6
TRK
Power OFF
Display
TRK
2
TYP
+6dB
06 06 06
+12dB
12 12 12
TRK
Display
*2
Display
*3
Focus Close
00 00 00
(99 99 99)
F.Offset Display
TRK
F.Cansel Display
*4 Single TR/32TR/100TR
Single TR
Display 9x(8x):91(81)
32TRK
92(82)
100TRK
93(83)
CRG Move
94(84)
*6 CRG Move, 100TR Jump Only
*7
TRK, MIN, SEC
F.AGC Gain
T.AGC Gain
RF AGC Gain
(F,T.AGC Gain = (Present Value/Initial Value) ¥ 20)
*8 Voltage of CRG Motor = 2 [V]
48
MIN
SEC
9x 9x 9x
F.Cancel Value = {Top Rank 8bit of Set Value (7F [H] to 80 [H] ) + 128} / 4
= 63 [D] to (32 [D] ) to 00 [D]
*5
SEC
8x 8x 8x
or
S Curve Check
01 01 01
RF.Offset Display
MIN
MIN
SEC
9x 9x 9x
Tracking
Open
Display
SEC
or
BAND
*1
MIN
8x 8x 8x
DEH-P8000R,P8050
6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT
• Note :
The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted
PU unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if
the PU unit must be changed, the grating should be checked using the procedure below.
• Purpose :
To check that the grating is within an acceptable range when the PU unit is changed.
• Symptoms of Mal-adjustment :
If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform
track search operations, or taking a long time for track searching.
• Method :
• Measuring Equipment
• Measuring Points
• Disc
• Mode
• Oscilloscope, Two L.P.F.
• E, F, REFO
• ABEX TCD-784
• TEST MODE
CONTROL UNIT
E
F
L.P.F.
E
REFO
Xch
100kΩ
390pF
REFO
F
Ych
Oscilloscope
100kΩ
390pF
REFO
L.P.F.
• Checking Procedure
1. In test mode, load the disc and switch the 5V regulator on.
2. Using the ] and [ buttons, move the PU unit to the innermost track.
3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance adjustment the display should now read "81". Press key 3 2 times. The display will change, returning to "81" on the
fourth press.
4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase difference is within 75° . Refer to the photographs supplied to determine the phase angle.
5. If the phase difference is determined to be greater than 75° try changing the PU unit to see if there is any
improvement. If, after trying this a number of times, the grating angle does not become less than 75° then the
mechanism should be judged to be at fault.
• Note
Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be
seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle.
• Hint
Reloading the disc changes the clamp position and may decrease the "wobble".
49
DEH-P8000R,P8050
Grating waveform
Ech → Xch 20mV/div, AC
Fch → Ych 20mV/div, AC
0°
30°
45°
60°
75°
90°
50
DEH-P8000R,P8050
7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 TEST MODE
- Error Messages
If a CD is not operative or stopped during operation due to an error, the error mode is turned on and cause(s) of the
error is indicated with a corresponding number. This arrangement is intended at reducing nonsense calls from the
users and also for facilitating trouble analysis and repair work in servicing.
(1) Basic Indication Method
1) When SERRORM is selected for the CSMOD (CD mode area for the system), error codes are written to DMIN (minutes display area) and DSEC (seconds display area). The same data is written to DMIN and DSEC. DTNO remains
in blank as before.
2) Main unit display examples
Depending on display capability of LCD used, display will vary as shown below. xx contains the error number.
8-digit display
ERROR–xx
6-digit display
ERR–xx
OR
Err–xx
4-digit display
E–xx
(2) Error Code List
Code Class
Displayed error code Description of the code and potential cause(s)
10
Electricity Carriage Home NG
CRG can't be moved to inner diameter.
CRG can't be moved from inner diameter.
→ Failure on home switch or CRG move mechanism.
11
Electricity
Focus Servo NG
Focusing not available.
→ Stains on rear side of disc or excessive vibrations on REWRITABLE.
12
Electricity
Spindle Lock NG
Spindle not locked. Sub-code is strange (not readable).
→ Failure on spindle, stains or damages on disc, or excessive vibrations.
Subcode NG
A disc not containing CD-R data is found. Turned over disc are found,
though rarely.
→ Failure on home switch or CRG move mechanism.
RF AMP NG
An appropriate RF AMP gain can't be determined.
→ CD signal error.
17
Electricity
Setup NG
APC protection doesn't work. Focus can be easily lost.
→ Damages or stains on disc, or excessive vibrations.
30
Electricity
Search Time Out
Failed to reach target address.
→ CRG tracking error or damages on disc.
A0
System
Power Supply NG
Power (VD) is ground faulted.
→ Failure on SW transistor or power supply (failure on connector).
Remarks: Mechanical errors are not displayed (because a CD is turned off in these errors).
Unreadable TOC does not constitute an error. An intended operation continues in this case.
A newly designed main unit must conform to the example given above.
Upper digits of an error code are subdivided as shown below:
1x: Setup relevant errors, 3x: Search relevant errors, 3x: Search relevant errors, Ax: Other errors.
51
DEH-P8000R,P8050
- New Test Mode
S-CD plays the same way as before.
If an error such as off focus, spindle unlocking, unreadable sub-code, or sound skipping occurs after setup, its
cause and time occurred (in absolute time) are displayed.
During setup, operational status of the control software (internal RAM: CPOINT) is displayed.
These displays and functions are prepared for enhancing aging in the servicing and efficiency of trouble analysis.
(1) Shifting to the New Test Mode
1 Turn on the current test mode by starting the reset from the key (it varies between the products).
2 Select S-CD for the source through the specified procedure including use of the [SOURCE] key, and inserting the
disc. Then, press the [ 6 ] key while maintaining the regulator turned off.
3 After the above operations, the new test mode remains on irrespective of whether the S-CD is turned on or off.
You can reset the new test mode by turning on the reset start.
* With some products, the new test mode can be reset through the same operations as that employed for shifting to
the STBY mode (while maintaining the Acc turned off).
(2) Key Correspondence
Key
Test mode
Power Off
Power On
BAND To power on
To power off
(offset adjustment performed)
]
–
In-play
–
New test mode
Error Production
Time/Err.No. switching
FWD-Kick
FF/TR+
–
[
–
REV-Kick
REV/TR-
–
1
–
Scan
–
2
RF AMP gain switching
T.Close (AGC performed)
/parameter display switching
Parameter display switching
/T.BAL adjustment/T.Open
F.Close/RF AGC/F.T.AGC
Mode
–
3
To power on
–
–
(offset adjustment not performed)
6
–
F.Mode switching
Auto/Manu T.No./Time switching
/T.Close (no AGC)/Jump switching
Note: Eject and CD on/off is performed in the same procedure as that for the normal mode.
(3) Cause of Error and Error Code
Code Class
Contents
40
Electricity Off focus detected.
Description and cause
FOK goes low.
→ Damages/stains on disc, vibrations or failure on servo.
41
Electricity
Spindle unlocked.
FOK = Low continued for 50 msec.
42
Electricity
Sub-code unreadable.
Sub-code was unreadable for 50 msec.
43
Electricity
Sound skipping detected.
Last address memory function was activated.
Note: Mechanical errors during aging are not displayed.
The error codes should be indicated in the same way as in the normal mode.
52
DEH-P8000R,P8050
(4) Display of Operational Status (CPOINT) during Setup
Status No. Contents
00
CD+5V ON process in progress.
01
Servo LSI initialization (1/3) in progress.
02
Servo LSI CRAM initialization in progress.
03
04
Offset adjustment (1/3) in progress.
05
06
07
FZD adjustment in progress.
08
10
Carriage move to home position started.
11
Carriage move to home position started.
12
Carriage is moving toward inner diameter.
13
Carriage is moving toward outer diameter.
14
15
20
21
22
23
24
25
Carriage outer kick in progress.
Carriage outer diameter feed (1 second) in progress.
Servo close started.
Pre-processing for focus search started.
Spindle rotation and focus search started.
Waiting for focus close (XSI=Low).
Standing by after focus close is over.
Focus search preprocessing is in
progress while setup protection is turned on.
Focus search preprocessing is in
progress while focus recovery is turned on.
Wait time after focus close is set up.
Standing by after focus close is over.
Setup (1/2) before T balance adjustment is started.
Setup (2/2) before T balance adjustment is started.
T balance adjustment started.
T balance adjustment (1/2).
T balance adjustment (2/2).
Waiting for spindle rotation to end.
Spindle rough servo.
Standing by after spindle rough servo is over.
RF AGC started.
RF AGC started.
RF AGC ending process in progress.
Tracking close in progress.
Standing by after tracking is closed.
Carriage closing in progress.
Focus/tracking AGC started.
Focus AGC started.
Focus AGC in progress.
Tracking AGC in progress.
Standing by after focus/tracking AGC are over.
Spindle processes applicable servo.
Check for servo close is started.
Check of LOCK pin started.
RF AGC started.
RF AGC in progress.
Standing by after RF AGC is over.
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
Protective action
None
None
None
None
None
None
None
None
None
None
None
Specified 10 seconds has been passed or failure
on home switch.
Specified 10 seconds has been passed or failure
on home switch.
None
None
None
None
None
Specified focus search time has been passed.
Specified focus search time has been passed.
None
None
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus.
Off focus or spindle not locked.
Off focus.
Off focus.
Off focus.
53
DEH-P8000R,P8050
(5) Display Examples
1) During Setup (When status no. = 11)
TRK No.
MIN.
SEC.
11
11'
11"
2) During Operation (TOC read, TRK search, Play, FF and REV)
The same as in the normal mode.
3) When a Protection Error Occurred
Switch to the following displays (A) and (B) using the [BAND] switch:
(A) Error occurrence timing display in absolute time.
An example: Error occurred in 12th tune at 34'56" in absolute time.
TRK No.
12
MIN.
34'
SEC.
56"
(B) Error No. display
An example: Error #40 (Off focus is detected)
ERROR-40
54
DEH-P8000R,P8050
A
7.1.2 DISASSEMBLY
A
CD Mechanism Module
A
A
- Removing the Case (Not shown)
1. Remove the two screws, and then remove the Case.
- Removing the CD Mechanism Module
1. Remove the four screws A.
2. Disconnect the connector, and then remove the CD
Mechanism Module.
A
- Removing the Tuner Amp Unit (1/2)
1. Disconnect the two connectors.
2. Remove the four screws A.
3. Disconnect the two stoppers indicated by arrows,
and then remove the Grille Assy.
A
A
A
Grille Assy
55
DEH-P8000R,P8050
- Removing the Tuner Amp Unit (2/2)
Antenna Cable
1. Remove the screw A, four screws C, and then
remove the Antenna Cable and Holder.
2. Remove the screw B.
3. Stretch the four tabs, and then remove the Tuner
Amp Unit.
A
B
Holder
C
C
C
C
Tuner Amp Unit
56
DEH-P8000R,P8050
- Removing the Upper Frame
1. Remove six Springs A, two Springs B and four
Screws.
2. Remove two Tabs situated on rear side of the Upper
Frame, remove two Arms on the front side, then
remove two Tabs on the front side.
A
Upper Frame
A
A
A
B
A
Arm
Arm
B
- Removing the Carriage Mechanism
Carriage Mechanism Section
1. Disengage the Carriage Mechanism from the two
dampers situated in the front side by driving it up,
then disengage and remove the mechanism from the
two dampers by driving it up aslant into front side
direction.
Note : When assembling the Carriage Mechanism, coat
the dampers with alcohol prior to the assembly.
- Removing the Clamp Arm Assy
A
A
Clamp Arm Assy Section
1. Remove a Spring A, a B and a Spring C.
2. Drive the Clamp Arm Assy up into rear side direction,
then disengage the arm from its current position
Finally, drive the assembly approximately 45 degrees
upward, then slide the assembly toward right side to
remove it.
B
C
57
DEH-P8000R,P8050
- Removing the Guide Arm Assy
1. Remove a connector, a spring A and B
2. Drive the Guide Arm Assy up aslant into rear side
direction, then remove it from a Pin. Finally, drive the
assembly approximately 45 degrees upward, then
slide the assembly toward left side to remove it.
Note : When assembling the guide arm assembly, route
the cord inside the assembly. In this operation,
care must be exercised so that cord may be
caught by the gear.
Guide Arm Assy Section
A
B
Pin
LO Arm Assy Section
- Removing the LO Arm Assy
1. Remove two Pins to dismount the LO Arm Assy.
- Removing the Control Unit and the Spindle
Short Pin
Motor
1. Remove from the connector after mounting the short
pin on the flexible PCB of the pickup unit.
2. Remove two Soldered joints, then remove two
Screws A.
3. Remove two connectors and a Screw B.
4. Disengage the Control Unit from two Tabs, then dismount the unit by sliding it toward left.
5. Dismount the Spindle Motor.
Spindle Motor
B
Control Unit
A
58
A
DEH-P8000R,P8050
- Removing the Loading Motor and Carriage
C
Motor
1. Remove the Spring and two Screws A.
2. Dismount the Loading Motor.
3. Remove the Belt, a Screw B, two Screws C, a Guide
and a Screw Unit.
4. Dismount the Carriage Motor.
Note : When assembling the Belt, use care so that it
may not be contaminated by grease.
Guide
B
Screw Unit
Carriage Motor
Belt
C
A
A
Loading Motor
- Removing the Pickup Unit
1. Remove two Screws and a Shaft.
2. Dismount the Pickup Unit.
Pickup Unit
Shaft
59
DEH-P8000R,P8050
7.2 IC
PML004AF
PA2028A
PAL005A
S-81250SGUP
PM4009A
PML004AF
60
PD5487A, PD5488A
BA6288FS
BR9010FV
PD5471A
UPD63710GC
BA5985FM
PE5011C
61
1
2
3
GND
VIN
VOUT
+
-
3
2
1
19
18
17
16
15
14
13
12
11
10
9
OUT1+
8
P-GND1
7
OUT1-
6
VCC
5
OUT2+
4
STBY
25
24
23
22
21
Amp4
Mute
20
Amp3
IN1
SVR
Amp1
IN2
Amp2
S-GND
VCC
Mute
IN4
OUT4+
Mute
IN3
MUTE
Mute
Ac_gnd
OUT4-
STBY
TAB
OUT3+
P-GND4
Protector
OUT2-
P-GND2
OUT3-
P-GND3
Switch_out
S-81250SGUP
PA2028A
PAL005A
DEH-P8000R,P8050
DEH-P8000R,P8050
PM4009A
- Pin Functions (PD5487A, PD5488A)
Pin No.
1
2
3
4
5
6
7
8,9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
62
Pin Name
TUNPDO
TUNPCK
TUNPCE
TUNPCE2
MOSENS
DLSENS
IPPW
VSS1,2
ASENBO
TELIN
RESET
OSC1
VSS3
OSC2
VCC1
NMI
rck
NC
DALMON
RX2
SYSPW
ISENS
PEE
RDS57K
FLPPW
MUTE
NC
RX
TX
I/O
O
O
O
O
I
I
O
O
I
I
O
O
I
O
I
O
I
O
I
O
O
I
O
Function and Operation
PLL data output
PLL clock output
PLL chip enable output
PLL chip enable output 2
Motion/window damage sensor input
Door lock sense input
IP-BUS power supply control output
GND
IP-BUS slave power supply control output
Cellular mute input
Reset input
Oscillator connection pin 1
GND
Oscillator connection pin 2
5V
Pull up
RDS clock input
Not used
DFS alarm output
IP-BUS data input 2
System power supply control output
Illumination sense input
Beep tone output
57kHzBP-OUT sense input
Flap motor driver power ON/OFF output
Mute output
Not used
IP-BUS data input
IP-BUS data output
DEH-P8000R,P8050
Pin No.
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50–61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89,90
91
92
93
94
95
96
97
98
99
100
Pin Name
BSO
BSI
BSCK
FLPOPN
DPDT
KYDT
FLPCLS
FOPENSW
NC
FCLSSW
DLED
NC
FLPILM
ILMPW
SWVDD
OELPW
DSENS
ST
SD
NC
VCC3
NC
VSS4
VCK/ROMCLK
VDT/ROMDATA
VST/BSRQ2
NC
BRXEN
BRST
BSRQ
NC
BSENS
ASENS
NC
DRELAY
LOCH
LOCL
NC
NC
FM/AM
TMUTE
DRST
RDSLK
RDT
DRSENS
DRSYS
TESTIN
NC
LEVELR
LEVELL
NC
SD_BW
NC
VSS5
SL
VREF
VCC4
TUNPDI
I/O
O
I
I/O
O
O
I
O
I
I
O
O
O
O
O
I
I
I
O
O/I
O/I
I/O
O
I/O
I
I
O
O
O
O
O
O
I
I
I
O
I
I
I
I
I
I
P-BUS communication data output
P-BUS communication data input
P-BUS serial clock input/output
Flap motor open output
Display serial data output
Display enable data input
Flap motor close output
Flap open switch input
Not used
Flap close switch input
Alarm LED output
Not used
Inside of flap illumination output
Illumination power supply control output
Display chip select output
OEL module power supply control output
Grille detach sense input
FM stereo input
SD input
Not used
5V
Not used
GND
E-VOL clock output / ROM correction clock output
E-VOL data output / ROM correction data input
E-VOL strobe pulse output / P-BUS communication input/output
Not used
P-BUS communication input/output
P-BUS reset output
P-BUS communication request input/output
Not used
Back up power sense input
ACC power sense input
Not used
External relay output
Local “H” output
Local “L” output
Not used
Open
FM/AM power select output
Tuner mute output
RDS decoder reset output
RDS lock signal input
RDS data input
Door open/close sense input
Door system select output
Test mode IN/test enable
Not used
Level meter “R“ AD input
Level meter “L“ AD input
Not used
SD input
Not used
GND
Signal level input
A/D converter reference voltage
5V
PLL data input
63
DEH-P8000R,P8050
1
30
*PD5487A, PD5488A
31
100
IC's marked by* are MOS type.
Be careful in handling them because they are very
liable to be damaged by electrostatic induction.
50
16
15
14
13
RIN
RNF
OUT2
BA6288FS
VREF
80
51
81
12
11
10
9
7
8
DRIVER
CONTROL LOGIC
POWER
SAVE
TSD
3
4
5
6
VM
VCC
FIN
2
GND
1
OUT1
DRIVER
BR9010FV
NC
VCC
1
8
WC
GND
CS
2 CS : Chip select input
7
SK : Serial data clock input
DI : Serial data input
DO : Serial data output
3 WC: Write control input
6
SK
4
DI
64
5
DO
DEH-P8000R,P8050
- Pin Functions (PD5471A)
Pin Name
NC
REM
BYTE
CNVSS
NC
reset
XOUT
VSS
XIN
VDD
nmi
NC
kd1-4
ks1-6
NC
ILMD
KYDT
DPDT
NC
OEL
rdy
NC
hold
NC
rd
NC
wr
NC
cs2
cs1
cs0
A19
NC
A17-9
VDD
A8
VSS
A7-1
NC
D15-0
NC
AVSS
NC
VREF
AVCC
NC
50
*PD5471A
I/O
Format
I
I
I
I
O
I
I
I
I/O
O
O
I
C
C
O
I
C
I
O
C
O
C
O
O
O
O
C
C
C
C
O
C
O
C
O
C
I/O
Not used
Remote control reception
External data BUS width select input
Processor mode select input
Not used
Reset input
Crystal oscillating element connection pin
GND
Crystal oscillating element connection pin
VDD
NMI input
Not used
Key data 1-4
Key strobe input/output 1-6
Not used
Dual illumination
Key data output
Display data input
Not used
OEL controller ON
OEL controller ready input
Not used
Hold input
Not used
Read strobe
Not used
Write strobe
Not used
Bank address (High)
Bank address (Low)
External ROM chip select
Address bus Output
Not used
Address bus Output
VDD
Address bus Output
GND
Address bus Output
Not used
Data bus input/output
Not used
Connect to VSS
Not used
Connect to VSS
Connect to VCC
Not used
26
Pin No.
1–4
5
6
7
8,9
10
11
12
13
14
15
16
17–20
21–26
27–31
32
33
34
35
36
37
38
39
40,41
42
43
44
45
46
47
48
49
50
51-59
60
61
62
63–69
70
71–86
87–93
94
95
96
97
98-100
25
51
Format
C
Meaning
C MOS
1
100
76
75
65
DEH-P8000R,P8050
- Pin Functions (UPD63710GC)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14, 15
16
17
18
19
20
21
22
23
24
25
26
27
28
66
Pin Name
GND
HOLD
MIRR
FOK
rst
A0
stb
sck
SO
SI
VDD
DA.VDD
NC
DA.GND
NC
DA.VDD
R+
RLL+
X.VDD
xtal
XTAL
X.GND
VDD
EMPH
FLAG
I/O
I/O
I/O
O
I
I
I
I
O
I
O
O
O
O
O
I
O
O
29
30
31
32
33
34
DIN
DOUT
SCKIN
SCKO
LRCKIN
LRCK
I
O
I
O
I
O
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
WDCK
TX
GND
C16M
LIMIT
VDD
LOCK
RFCK
WFCK
PLCK
GND
C1D1
C1D2
C2D1
C2D2
C2D3
VDD
PACK
TSO
TSI
tsck
TSTB
GND
TEST
O
O
O
I
O
O
O
O
O
O
O
O
O
O
O
I
I
I
I
Logic circuit GND
Defect detection output
MIRR output
RFOK signal output
Reset signal input
Command/parameter identification signal input
Data strobe signal input
Clock signal input for serial data input/output
Serial data and status signal output
Serial data input
Positive power supply terminal to logic circuit
Positive power supply terminal to D/A converter
Not used
D/A converter GND
Not used
Positive power supply terminal to D/A converter
Right channel audio data output
Right channel audio data output
Left channel audio data output
Left channel audio data output
Positive power supply terminal to crystal oscillation circuit
Crystal oscillator connect pin
Crystal oscillator connect pin
Crystal oscillation circuit GND
Output pin for the pre-emphasis data in the sub-Q code
Flag output pin to indicate that audio data currently being output consists
of noncorrectable data
Serial data input to internal DAC
Serial audio data output
Serial clock input to internal DAC
Audio data that is output from DOUT changes at rising edge of this clock
LRCK signal input to internal DAC
Signals to distinguish the right and left channels of the audio data output
from DOUT
Output double the frequency of LRCK
Digital audio interface data output
Logic circuit GND
Oscillator clock buffering output
Status of the pin is output at Bit 5 of the status output
EFM synchronous detection signal
Frame synchronous signal of XTAL-system
Frame synchronous signal of PLL-system
Monitor pin of bit clock
Logic circuit GND
Output pin for indicating the C1 error correction results
CD-TEXT PACK synchronous signal
CD-TEXT data serial output
CD-TEXT control parameter serial input
CD-TEXT serial clock input
CD-TEXT parameter strobe signal input
Logic circuit GND
Test pin
DEH-P8000R,P8050
Pin No.
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Pin Name
ATEST
RFMODE
A.GND
FD
TD
SD
MD
DACO
FBAL
TBAL
TEVCA
A.VDD
EFM
ASY
C3T
RFI
AGCO
AGCI
RFO
EQ2
EQ1
RFA.GND
A
C
B
D
F
E
A.VDD
REFOUT
FEFEO
TETEO
TE2
TEC
A.GND
PD
LD
PN
A.VDD
I/O
I/O
I
O
O
O
O
O
O
O
O
O
I
I
O
I
O
I
I
I
I
I
I
I
O
I
I/O
I
I/O
I/O
I
I
O
I
Test pin
Use/not use select for internal RF amplifier
Analog circuit GND
Focus drive output
Tracking drive output
Sled drive output
Spindle drive output
DAC output for adjustment
Power supply terminal to analog circuit
EFM signal output
EFM comparator reference voltage input
3T detection capacitor additional pin
RF signal input for EFM data regulation
RF signal output of after gain adjustment
RF-AGC amplifier input
RF summing amplifier output
RF amplifier equalizer parts additional pin
RF amplifier equalizer parts additional pin
RF summing amplifier inverted input
Analog circuit GND
Photo detector A input
Photo detector C input
Photo detector B input
Photo detector D input
Photo detector F input
Photo detector E input
Positive power supply terminal to analog circuit
Reference electric potential output
Focus error amplifier inverted input
Focus error amplifier output
Tracking error amplifier inverted input
Tracking error amplifier output
Tracking error output of after amplification
Tracking comparator input
Analog circuit GND
PD detection signal input for LD output monitor
LD control current output
APC circuit control polarity set pin
Positive power supply terminal to analog circuit
26
50
*UPD63710GC
75
1
100
25
76
51
67
DEH-P8000R,P8050
- Pin Functions (BA5985FM)
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
BA5985FM
68
Pin Name
FWD
OPIN1(+)
OPIN1(−)
OPOUT1
OPIN2(+)
OPIN2(−)
OPOUT2
VCC
VOL(−)
VOL(+)
VO2(−)
VO2(+)
VO1(−)
VO1(+)
VO4(+)
VO4(−)
VO3(+)
VO3(−)
GND
BIAS
MUTE
OPOUT3
OPIN3(−)
OPIN3(+)
OPOUT4
OPIN4(−)
OPIN4(+)
REV
I/O
I
I
I
O
I
I
O
O
O
O
O
O
O
O
O
O
O
I
O
I
I
O
I
I
I
Loading driver FWD input
CH1 pre-amplifier input
CH1 pre-amplifier inverted input
CH1 pre-amplifier output
Power supply
Loading driver negative output
Loading driver positive output
Driver CH2 negative output
Driver CH2 positive output
GND
Bias input
Mute control
Loading driver REV input
DEH-P8000R,P8050
- Pin Functions(PE5011C)
Pin No.
1
2
3
4
5-8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23, 24
25
26
27
28
29
30
31
32, 33
34
35-44
45
46
47
48
49
50
51
52
53, 54
55
56
57
58
59
60
61, 62
63-66
67
68
69
70
71
72
73
74
75
76
Pin Name
EJTSNS
DSCSNS
VDSENS
TEMP
NC
AVREF
reset
XT1
XT2
IC(VPP)
X1
X2
VDD
VSS
xsck
XSO
XSI
brst
pack
NC
XA0
xstb
xrst
FOK
MIRR
LOCK
CD5VON
NC
EMPH
NC
VSS
VDD
adena
VDCONT
NC
csens
BRXEN
bsrq
NC
CONT
CDMUTE
CDEJET
CDLOAD
BMUTE
clamp
NC
NC
TXARI
fsck
FTXD
FRXD
bsck
BDATA
testin
NC
TSTB
NC
I/O
Format
I
I
I
O
O
I
C
C
O
O
O
I
I
I
O
C
C
C
O
C
O
O
C
C
I
I/O
O
/C
C
O
O
O
O
O
I
C
C
C
C
C
C
I
O
O
O
I/O
I/O
I
C
C
C
/C
/C
O
C
Disc eject position sense input
Disc insert position sense input
VD power supply short sense input
Temperature sense input
Not used VSS
A/D reference voltage input
System reset input
VDD
Open
VSS
Main clock radiator(8.38MHz)connection
Main clock radiator(8.38MHz)connection
Power supply(+5V)
GND
CD LSI serial clock output
CD LSI serial data output
CD LSI serial data input
P-Bus reset input
CD-TEXT pack sync signal input
Not used Open
CD LSI data discrimination control signal output
CD LSI strobe output
CD LSI reset output
Focus OK input
Specular surface detection input
Spindle lock input
CD +5V power supply control output
Not used Open
Emphasis information output
Not used Open
GND
Power supply(+5V)
A/D reference voltage supply control output
VD power supply control output
Not used Open
Flap close sense input
Input/output by which P-Bus can be received
P-Bus polling request output
Not used Open
Servo driver power supply control output
CD mute control output
Load/Eject motor Eject control output
Load/Eject motor Load control output
Bus mute output
Disc clamp input
Not used Open
Not used VDD or VSS
Tx output set selection input
Flash writing clock input(Open)
Flash writing data output(Open)
Flash writing data input(Open)
P-Bus serial clock input/output
P-Bus serial data input/output
Test program start input
Not used Open
CD-TEXT strobe output
Not used Open
69
DEH-P8000R,P8050
Pin No.
77
78
79
80
Pin Name
tsck
TSO
TSI
AVSS
I/O
O
O
I
Format
C
C
80
40
61
60
21
41
70
1
20
*PE5011C
CD-TEXT serial clock output
CD-TEXT serial data output
CD-TEXT serial data input
A/D GND
IP-BUS input (Blue)
This Product
Fuse holder
Fuse holder
Black (ground)
To vehicle (metal) body.
Orange/White
To lighting switch terminal.
Perform these connections when using a
different amp (sold separately).
Subwoofer
Rear speaker
Rear speaker
Left
Front speaker
≠
+
≠
+
≠
+
≠
+
≠
+
Blue/white
To system control terminal of
the power amp or Auto-antenna
relay control terminal.
(Max. 300 mA 12 V DC.)
Front speaker
Subwoofer output
or Non-Fading output
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Fuse resistor
Red
Fuse resistor
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
White/yellow
Brown
See the section “DFS Alarm
Installation”.
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
IP-BUS cable
Multi-CD player
(sold separately)
Antenna jack
Rear output
Front output
Green/black
Green
White/black
White
Violet/black
Violet
Gray/black
Gray
System remote control
Connecting cords
with RCA pin plugs
(sold separately)
≠
+
≠
+
≠
+
≠
+
≠
+
Subwoofer
Rear speaker
Rear speaker
Right
Front speaker
Front speaker
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
DEH-P8000R,P8050
8. OPERATIONS AND SPECIFICATIONS
- Connection Diagram (DEH-P8000R/UC)
71
72
IP-BUS input (Blue)
This Product
Fuse holder
Fuse holder
Black (ground)
To vehicle (metal) body.
Orange/White
To lighting switch terminal.
Perform these connections when using a
different amp (sold separately).
Subwoofer
Rear speaker
Left
Front speaker
Front speaker
Blue/white
To system control terminal of
the power amp or Auto-antenna
relay control terminal.
(Max. 300 mA 12 V DC.)
Subwoofer output
or Non-Fading output
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Fuse resistor
Red
Fuse resistor
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
White/yellow
Brown
White/red
White/orange
See the section “DFS Alarm
Installation”.
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
IP-BUS cable
Multi-CD player
(sold separately)
Antenna jack
Front output
≠
+
≠
+
≠
+
≠
+
Green/black
Green
White/black
White
Violet/black
Violet
Gray/black
Gray
System remote control
Connecting cords
with RCA pin plugs
(sold separately)
≠
+
≠
+
≠
+
≠
+
Subwoofer
Rear speaker
Right
Front speaker
Front speaker
Power amp
(sold separately)
Power amp
(sold separately)
DEH-P8000R,P8050
- Connection Diagram (DEH-P8050/ES)
DEH-P8000R,P8050
8.1 OPERATIONS (DEH-P8000R/UC))
DISPLAY button
RESET button
FUNCTION button
ENTERTAINMENT
button
EJECT button
5/∞/2/3 buttons
EQ button
+/– button
Buttons 1–6
PGM button
SOURCE/OFF button
BAND button
PTY button
AUDIO button
RT button
ATT button
This lets you quickly lower volume level (by about 90%).
Press once more to return to the original volume level.
+/– button
BAND button
FUNCTION button
5/∞ buttons
PGM button
AUDIO button
2/3 buttons
SOURCE/OFF button
73
74
Hold for 1 second or more
3. Source OFF.
2. Raise or lower the volume.
• In the following cases, the sound source will not change:
* No TV tuner is connected to this product.
* No Multi-CD player is connected to this product. (When “Multi-CD” display is OFF.)
* No DAB tuner is connected to this product.
* No disc is set in this product.
* No magazine is set in the Multi-CD player.
* AUX (external input) is set to OFF.
Note:
Each press of the SOURCE/OFF button selects the desired source in the following order:
Built-in CD player (Compact Disc) = TV (Television) = Tuner = DAB (Digital Audio
Broadcasting) Tuner = Multi-CD player = AUX
Each press changes the Source ...
1. Select the desired source (e.g. Tuner).
• Loading a disc in this product.
Note:
The following explains the initial operations required before you can listen to music.
To Listen to Music
Basic Operation
Seek Tuning
2 seconds or more
Broadcast station preset memory
• Up to 18 FM stations (6 in FM-1, FM-2 and FM-3) and 6 AM
stations can be stored in memory.
• You can also use the 5 or ∞ buttons to recall broadcast
stations memorized in buttons 1 through 6.
Note:
2 seconds or less
Preset station recall
FM-1 = FM-2 = FM-3
= AM
Band
Frequency Indicator
• You can memorize broadcast stations in buttons
1 through 6 for easy, one-touch station recall.
Preset Tuning
Band Indicator
Preset Number Indicator
• If you continue pressing the button for longer than 0.5 seconds, you can skip broadcast
stations. Seek Tuning starts as soon as you stop pressing the button.
• “” stereo indicator lights when a stereo station is selected.
Note:
0.5 seconds or less
0.5 seconds or more
Manual Tuning (step by step)
• You can select the tuning method by changing the length of time you
press the 2/3 button.
Manual and Seek Tuning
Basic Operation of Tuner
DEH-P8000R,P8050
• A CD TEXT disc is a CD featuring recorded text information such as Disc Title, Artist Name
and Track Title.
• If you switch a display when the disc title has not been input, “No Title” is displayed.
• If you switch a display when the disc artist has not been input, “No Artist Name” is displayed.
• If you switch a display when the track title has not been input, “No Title” is displayed.
• If you switch a display when the track artist has not been input, “No Artist Name” is displayed.
Note:
Each press of the DISPLAY button changes the display in the following order:
Playback mode (Play Time) = Disc Title = Disc Artist = Track Title = Track Artist
With text longer than 20 letters, you can scroll to see the rest of the text by pressing the
DISPLAY button for 2 seconds or more.
Switching the Display (only for CD TEXT Discs)
Track Number Indicator
Play Time Indicator
• The CD function can be turned
ON/OFF with the disc remaining in this product.
• Discs left partially inserted
after ejection may incur damage or fall out.
Note:
• If you switch a display when the disc title has
not been input, “No Title” is displayed.
Note:
Press the EJECT button, and
you can open the front panel
before ejection.
In case of opening the front
panel, you can just eject a CD.
Eject
Each press of the DISPLAY button changes
the display in the following order:
Playback mode (Play Time)
= Disc Title
Switching the Display
Basic Operation of Built-in CD Player
Basic Operation
• If a disc cannot be inserted fully or playback fails, make sure the
recorded side is down. Push the EJECT button and check the disc
for damage before reinserting it.
• If the Built-in CD player cannot operate properly, an error message
(such as “ERROR-14”) appears on the display.
Note:
If a CD is inserted, the front panel is closed automatically.
The Built-in CD player plays one standard 12 cm or 8 cm (single)
CD at a time. Do not use an adapter when playing 8 cm CD.
• Do not use with the front panel left open. If you do leave it open,
it may result in injury in the event of an accident.
WARNING:
• When opening the front panel, the 1 to 6 buttons are not available.
Note:
Press the EJECT button for 1 second or more, and you can open the
front panel without ejecting a CD.
In case of opening the front panel, you can close it.
Open
Continue pressing
0.5 seconds or less
Disc Loading Slot
Fast Forward/Reverse
Track Search
• You can select between Track Search or Fast Forward/Reverse by pressing
the 2/3 button for a different length of time.
Track Search and Fast Forward/Reverse
DEH-P8000R,P8050
75
76
Continue pressing
Fast Forward/Reverse
• If you switch displays when disc titles have
not been input, “No Title” is displayed.
Note:
Each press of the DISPLAY button changes
the display in the following order:
Playback mode (Play Time)
= Disc Title
Switching the Display
Disc Number Indicator
Magazine 1 = Magazine 2
= Magazine 3
(Displayed about for 2 seconds.)
When two or more Multi-CD
players are connected using a
multiple connection adapter,
you can select the Multi-CD
player by pressing the BAND
button.
Switching the Multi-CD Player
Disc Search
Play Time Indicator
Track Number Indicator
0.5 seconds or less
Track Search
• You can select between Track Search or Fast
Forward/Reverse by pressing the 2/3 button
for a different length of time.
Track Search and Fast Forward/Reverse
This product can control a Multi-CD player. (With certain old type Multi-CD players,
using a multiple connection adapter lets you connect multiple units which you can control
with this product.)
Basic Operation of Multi-CD Player
Basic Operation
• You can use the following two functions. Refer to Multi-CD Player’s Owner’s Manual for operation details.
* Title display switching
* Title scroll
• You cannot switch to the Disc Title Input mode in the Detailed Setting Menu.
When playing a CD TEXT disc on a CD TEXT compatible Multi-CD Player such as
the CDX-P650:
• The Multi-CD player may perform a preparatory operation, such as verifying the presence of a disc
or reading disc information, when the power is turned ON or a new disc is selected for playback.
“READY” is displayed.
• When a magazine is loaded into a 50-Disc type Multi-CD Player, information on all the discs in the
magazine is read.
If you start playing a disc on a 50-Disc type Multi-CD Player before reading of information on all
discs has been completed, reading of information stops part way through. This will prevent you
from using the ITS function. (If you try and use this function, “Not Ready” is displayed.)
If this happens, reading of information begins again when you switch to a component other than
the 50-Disc Type Multi-CD Player.
• If the Multi-CD player cannot operate properly, an error message such as
“ERROR-14” is displayed. Refer to Multi-CD Player Owner’s Manual.
• If there are no discs in the Multi-CD player magazine, “No Disc” is displayed.
• “LOADING” will be displayed in the following cases:
* If the disc in the extra tray in selected.
* If the disc in moved from the extra tray to the magazine.
(Refer to the 50-Disc Type Multi-CD Player Owner’s Manual.)
• You cannot use the “Ejecting a Single Disc”, “Frequency Play”, “Music Group Play” or “ABC
Disc Title Search” functions with this product.
Note:
• After completing a rough search, use the 5 and ∞ buttons to select a desired disc.
Note:
• Select the desired block with the 1 to 5 buttons.
This handy function lets you select discs loaded in a 50-Disc Multi-CD Player using the 1
to 5 buttons. The 50 discs are divided into five blocks, with each of the 1 to 5 buttons
assigned to a block.
Disc Number Rough Search (for 50-Disc type only)
• When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the 1 to 6
buttons for 2 seconds or longer.
Note:
• You can select discs directly with the 1 to 6 buttons. Just press the number
corresponding to the disc you want to listen to.
Disc Number Search (for 6-Disc, 12-Disc types)
DEH-P8000R,P8050
Continuous power output is 22 W per channel min. into 4
ohms, both channels driven 50 to 15,000 Hz with no more
than 5% THD.
Maximum power output ...................................... 45 W × 4
45 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω (for Subwoofer)
Load impedance
...................... 4 Ω (4 – 8 Ω [2 Ω for 1 ch] allowable)
Preout maximum output level/
output impedance .................................. 4.0 V/100 Ω
Equalizer (3-Band Parametric Equalizer)
(Low) .......................... Frequency: 40/80/100/160 Hz
Q Factor: 0.35/0.59/0.95/1.15
(+6 dB when boosted)
Gain: ±12 dB
(Mid) .......................... Frequency: 200/500/1k/2k Hz
Q Factor: 0.35/0.59/0.95/1.15
Gain: ±12 dB
(High) ................ Frequency: 3.15k/8k/10k/12.5k Hz
Q Factor: 0.35/0.59/0.95/1.15
Gain: ±12 dB
Loudness contour
(Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz)
(High) ................ +11 dB (100 Hz), +11 dB (10 kHz)
(volume: –30 dB)
HPF
Frequency ............................................ 50/80/125 Hz
Slope ........................................................ –12 dB/oct.
Subwoofer output
Frequency ............................................ 50/80/125 Hz
Slope ........................................................ –18 dB/oct.
Gain ................................................................ ±12 dB
Phase ................................................ Normal/Reverse
Audio
System .................................... Compact disc audio system
Usable discs .................................................. Compact disc
Signal format .................... Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
Frequency characteristics .............. 5 – 20,000 Hz (±1 dB)
Signal-to-noise ratio ...... 95 dB (1 kHz) (IHF-A network)
Dynamic range ............................................ 94 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ...................................... 10.0 A
Dimensions
(DIN) (chassis) ...... 178 (W) × 50 (H) × 155 (D) mm
[7 (W) × 2 (H) × 6-1/8 (D) in.]
(nose) ............ 188 (W) × 58 (H) × 20 (D) mm
[7-3/8 (W) × 2-1/4 (H) × 3/4 (D) in.]
(D) (chassis) ...... 178 (W) × 50 (H) × 160 (D) mm
[7 (W) × 2 (H) × 6-1/4 (D) in.]
(nose) ............ 170 (W) × 46 (H) × 15 (D) mm
[6-3/4 (W) × 1-3/4 (H) × 5/8 (D) in.]
Weight ........................................................ 1.8 kg (4.0 lbs)
Frequency range ...................................... 530 – 1,710 kHz
Usable sensitivity .............................. 18 µV (S/N: 20 dB)
Selectivity ................................................ 50 dB (±10 kHz)
AM tuner
Frequency range .................................... 87.9 – 107.9 MHz
Usable sensitivity .................................................... 10 dBf
(0.9 µV/75 Ω, mono, S/N: 30 dB)
50 dB quieting sensitivity .... 15 dBf (1.5 µV/75 Ω, mono)
Signal-to-noise ratio ...................... 70 dB (IHF-A network)
Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 – 15,000 Hz (±3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
Selectivity .................................................... 70 dB (2ACA)
Three-signal intermodulation
(desired signal level) ........................................ 30 dBf
(two undesired signal level: 100 dBf)
FM tuner
CD player
General
Specifications (DEH-P8000R/UC)
Continuous power output is 22 W per channel min. into 4
ohms, both channels driven 50 to 15,000 Hz with no more
than 5% THD.
Maximum power output ...................................... 45 W × 4
45 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω (for Subwoofer)
Load impedance
...................... 4 Ω (4 – 8 Ω [2 Ω for 1 ch] allowable)
Preout maximum output level/
output impedance .................................. 4.0 V/100 Ω
Equalizer (3-Band Parametric Equalizer)
(Low) .......................... Frequency: 40/80/100/160 Hz
Q Factor: 0.35/0.59/0.95/1.15
Level: ±12 dB
(Mid) .......................... Frequency: 200/500/1k/2k Hz
Q Factor: 0.35/0.59/0.95/1.15
Level: ±12 dB
(High) ................ Frequency: 3.15k/8k/10k/12.5k Hz
Q Factor: 0.35/0.59/0.95/1.15
Level: ±12 dB
Loudness contour
(Low) ..................+3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid) ..................+10 dB (100 Hz), +6.5 dB (10 kHz)
(High) ..................+11 dB (100 Hz), +11 dB (10 kHz)
(volume: –30 dB)
HPF
Frequency ............................................ 50/80/125 Hz
Slope ........................................................ –12 dB/oct.
Subwoofer output
Frequency ............................................ 50/80/125 Hz
Slope ........................................................ –18 dB/oct.
Level .............................................................. ±12 dB
Phase ................................................ Normal/Reverse
Audio
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ...................................... 10.0 A
Dimensions
(DIN) (chassis) ...... 178 (W) × 50 (H) × 155 (D) mm
(nose) .......... 188 (W) × 58 (H) × 20 (D) mm
(D) (chassis) ...... 178 (W) × 50 (H) × 160 (D) mm
(nose) .......... 170 (W) × 46 (H) × 15 (D) mm
Weight ...................................................................... 1.8 kg
General
Frequency range ........................ 531 – 1,602 kHz (9 kHz)
530 – 1,710 kHz (10 kHz)
Usable sensitivity .............................. 18 µV (S/N: 20 dB)
Selectivity .................................................. 50 dB (±9 kHz)
50 dB (±10 kHz)
AM tuner
Frequency range ...................................... 87.5 – 108 MHz
Usable sensitivity
.................. 10 dBf (0.9 µV/75 Ω, mono, S/N: 30 dB)
50 dB quieting sensitivity .... 15 dBf (1.5 µV/75 Ω, mono)
Signal-to-noise ratio ...................... 70 dB (IEC-A network)
Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 – 15,000 Hz (±3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
FM tuner
System .................................... Compact disc audio system
Usable discs .................................................. Compact disc
Signal format .................... Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
Frequency characteristics .............. 5 – 20,000 Hz (±1 dB)
Signal-to-noise ratio ...... 95 dB (1 kHz) (IEC-A network)
Dynamic range ............................................ 94 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
CD player
Specifications (DEH-P8050/ES)
DEH-P8000R,P8050
77

DEH-P8000R UC

Transcription

Similar documents

DEH-P3600MP/XM/EW