february 2012 pricelist 5” gauge section maxitrak – mts 5”

Transcription

FEBRUARY 2012 PRICELIST
5” GAUGE SECTION
MAXITRAK – MTS 5” GAUGE PLANET



Steel body with moulded details. 2 motor drive.
Available in Maroon, Green and in Cane Train Yellow
MTS Special Features: Headlight, Battery Condition Indicator, Upgraded Power Controller,
MU System with Hand Controller
You can buy the loco on its own, in which case you need to provide a driving car with a latching hand
brake, a deep cycle battery and power cabling with a power cut-off switch, or look at our packages.
Loco Only
$2,595
Power Cable and Switch Set to suit
$165
(Required if you are providing your own driving car)
MU Jumper Cable set for double heading - $89
Package Deal
$4,750
Loco, 1.2m Driving Car, Quality USA made DC27 Deep Cycle Battery & Battery Charger
Starter Trainset
$6,100
As “Package Deal” above, plus an oval of 2.5m radius track
Deluxe Trainset
$9,100
As above with passenger car added, larger 3.8m radius oval and a siding $8995
Let us tailor a package to suit you!
Page 1 of 12
Copyright © 2012 Mini Train Systems Pty Ltd – ABN 58 003 948 392
PO Box 264, Penrith NSW 2751 – C/O The Train Shed, Vicary’s Winery, The Northern Rd, Luddenham NSW 2745
(02) 4739 0199 – info@minitrains.com.au - www.minitrains.com.au
MAXITRAK 5” GAUGE 4 & 6 MOTOR ELECTRIC LOCOS

All locos are available either ready to run or as a painted or an unpainted kit. Assembly
complexity varies between models, with the F7 being the most complex and the Class 20
being the simplest.

Prices are for specific liveries and may vary with simpler or more complex decorations.

Super detail kits are included with some models. These kits normally provide the fittings for
one end of the loco only.

All models feature MTS Multi-Unit control systems and include a hand held control unit.

All models can be plugged together to run in MU from the one controller, when fitted with
usually optional front MU connectors.

All locos are wired for 24V operation and require a driving car and batteries (available at a
discount when buying the loco). If you are providing your own driving car we have power
switch and cable harnesses available.

All locos are supplied with a substantial steel ballast weight for maximum traction.
BR CLASS 73



Classic “Electro Diesel” design – still in revenue
service and in preservation.
Fibreglass body with plenty of detail. Factory
paintwork is exceptional.
Premium “Pullman” livery shown – BR Blue is
standard
BR CLASS 20



First generation British Diesel yet still in service and
many preserved.
Fibreglass body with lots of detail
Standard livery is BR green with or without yellow
warning panels.
BR CLASS 66




Popular modern prototype
Top of the range from Maxitrak
Steel Body with moulded detail parts
6 Motor Drive
Page 2 of 12
GM-EMD F7





The definitive US diesel
Fibreglass body with lots of detail.
4 motor drive
Various liveries available. Specific price shown is for Santa Fe.
Powered “near prototype” B-Units also available – slaves off the A Unit control system and
effectively doubles the power compared to an “A” unit on its own.
4 & 6 MOTOR LOCO PRICING:
Livery
Ready to Run
Painted Kit
Unpainted Kit
Motors
Super detailing kit
Class 20
BR Green
$8,795
$6,895
$5,395
4
included
Class 73
Pullman
$9,795
$7,895
$5,595
4
included
Accessories
 1.8m driving car with 2 x DC27 batteries
 Intelligent Battery Charger
 1.8m passenger car
 Power Cable and Switch Set to suit
 Front MU Connectors
 MU Jumper Cable set for double heading
 POA for other liveries
Class 66
Freightliner
$13,995
$10,995
$ 7,995
6
included
F7A
SantaFe
$11,995
$10,195
$ 6,995
4
n/a
F7B
SantaFe
$10,995
$ 9,695
$ 6,595
4
n/a
$2,000 (discount price when purchased with a loco)
$ 159
$1,695
$ 165 (required when using your own driving car)
$ 150 (standard in F7B)
$ 89
LEAD TIME ON ALL OF THESE LOCOS (IF NOT IN STOCK) IS 12 TO 16 WEEKS DEPENDING ON LIVERY
Page 3 of 12
5” GAUGE STEAM LOCOS from MAXITRAK
QUARRY HUNSLET 0-4-0ST – “ALICE”







Delightful narrow gauge loco
Silver soldered copper boiler
Full Stephenson’s valve gear
Axle Pump and hand pump
Lots of details
Perfect starter steam loco
Char grate available to order
 READY TO RUN
Loco Only
Package



$7,595
$9,495
(Loco with 1.2m driving car with coal bunker)
Lead time: 4 weeks
Matching 1.2m passenger cars are also available from $1,495 if purchased with the loco.
Boiler design has been accepted by AMBSC however some clubs require modification of
safety valves.
Page 4 of 12
5” GAUGE ROLLING STOCK
MTS builds a range of driving cars and matching passenger cars for both electric and steam locos.





Driving cars for electric locos are fitted out to take DC27 deep cycle batteries (not included)
and include industrial quality safety power cut-off switches. Acid resistant battery boxes are
also included.
Driving cars for steam locos include a coal bunker and space for a water tank under the
driver’s seat.
All use the popular Sandberg bogies.
Driving cars have latching hand brake (rear bogie on 1.2m cars, both bogies on 1.8m cars)
Available with black steel frames and with timberwork in Indian Red or Grey, or (small
surcharge) in any colour you like – including green as shown!
1.2m Straddle Car
Steam
Driving
$1,695
1.8m Straddle Car
$1,895
Electric
Driving
$1,895
Passenger
Car
$1,495
(12V)
(un-braked)
$2,195
$1,695
(12V or 24V)
(un-braked)
DC27 Battery
$315
Sandberg 5” gauge Bogies (each) separately:
Un-braked
$389 with vacuum brakes
$495
Mech brakes $429 Electric Actuator
$220
All include heavy duty pivot pin assemble and retaining RPage 5 of 12
Clip to MTS specs.
5” GAUGE MODULAR STEEL TRACK



25x10mm flatbar steel rails MIG
welded to 50x6mm flatbar sleepers
and painted in red oxide.
 Small Points are 1.5m long and
same radius and angle as #2 Radius
Curves.
 Straights are multiples of 1.5m
 Smaller curves are multiples of
22.5 degrees
 Gauge spread 3mm on curves
 Track spacing approx. 1.25m
Availability depends mainly on quantity of track required and current workshop
commitments.
QUANTITY DISCOUNTS AVAILABLE
Unit
Straight
2.5m Radius
3.8m Radius
5.0m Radius
Half
$80
na
na
$100
10m Radius
$225 – 15 degree
12m Radius
14m Radius
$285 – 15 degree
$320 – 15 degree
Left or Right Hand Points:
3.8m radius, 1.5m long, 22.5 degree
10m radius, 3.0m long, 15 degree
Single
$130
$100
$130
$165
Double
$245 Custom length straights available to order.
$175
$245
$310
$575
$770
Other:
Diamonds 15 to 45 degree from $440
Electric point motors
$350
4 Channel Remote Control Kit $595 (see Feb 2012 Newsletter for details)
Plain Buffer Stop
$120
5”+ 3 ½” DUAL GAUGE TRACK
Available in straights, curves 5m radius and above and in 10m radius points. Add 20% to 5” gauge
plain track prices above for straights and curves. Points are $1100 each due to complexity including
blading the “K” crossing.
SEE THE 7 ¼” GAUGE TRACK SECTION FOR OUR RANGE OF TOOLS TO BUILD YOUR OWN TRACK
Page 6 of 12
FEBRUARY 2012 PRICELIST
7 ¼” GAUGE SECTION
We currently have two electric locomotives available, other types being designed and built to order
including steam outline electric powered locos.
MAXITRAK- MTS PLANET 2

All the great features of the 5” gauge version
(including MTS MU system), plus 4 motor
drive and ball race axle bearings!

Available in maroon or green liveries.

Includes the British 4QD DLF2 controller now
used in all Maxitrak locos sold by MTS.

Supplied with MTS’s standard hand held
control unit.
MTS BR Class 04

Close scale model of BR Class 04
“Drewry” shunter used in
various countries. This is the
inside framed standard gauge
version.

This is a heavy duty,
maintainable, commercial
operation quality locomotive
able to haul at least three
enclosed passenger cars and 910 adults depending on grades.

Similar locos have been in commercial use running more than 150 days every year for many
years at The Train Shed.

The control system is the latest version of MTS’s “H-Chopper” FET design that has no relays
and provides pulse controlled driving and braking for smooth and efficient operation.
Supplied with MTS control panel including throttle, brake, key operated reverser, light and
horn switches plus battery voltmeter and load ammeter.
Small steam outline electric locos available for similar prices.


Page 7 of 12
7 ¼” GAUGE LOCO SPECIFICATIONS
Wheel arrangement
Drive
Maxitrak-MTS Planet 2
0-4-0
4 motors geared to axles
Power
Voltage
320W
12V or 24V
MTS BR Class 4
0-6-0
Chassis mounted motor
with chain drive
1000W
48V
Control System
Operator Controller
MU Control
Braking
4QD DLF2
Hand Held
- Fwd/Rev Switch
- Variable Throttle
- On/Off Brake
- Headlight Switch
- Horn/Aux Switch
- Brake Indicator
- Motor Isolated Indicator
- Battery Condition Indicator
Yes
Basic Electromagnetic
MTS PS5
Driving Car mounted Control Panel
- Fwd/Rev Key operated switch
- Notched Variable Throttle
- Notched Variable Brake
- 4 Light/Aux Switches
- 2 Horn Buttons
- Brake and Drive Indicators
- Pulse Control & Fault Indicators
- Voltmeter and Ammeter
Yes (not compatible with Planet)
Fully Controlled Regenerative
Suspension
Connecting rods/jackshaft
3 point spring each axle
No
Axle boxes and springs
Yes
$4,995
$3,000 (12V or 24V)
$ 350 (12V only)
$14,995
$ 3,500 (48V)
na
$ 165
$ 195
Prices
Loco Only
Driving Car & battery pack
Internal Battery Option
(includes battery)
Power Cable and Switch Set
(required when using your own driving car)
MU Jumper Cable set
$
89
$
99
(for double heading)
Page 8 of 12
7 ¼” GAUGE ROLLING STOCK
1.5m 48V Driving Car (shown with control box – not included)
1.5m 24V Driving Car
STRADDLE TYPE DRIVING AND PASSENGER CARS




Fitted out to take DC24 deep cycle batteries and include industrial quality safety power cutoff switches. Acid resistant battery boxes are also included in 12V and 24V versions.
Use MTS Type “F” inside framed bogies
Driving cars have latching hand brake - rear bogie on 24V cars and single pack 48V cars, both
bogies on 48V “double pack” cars.
Available with black steel frames and with timberwork in Indian Red or Grey, or (small
surcharge) in any colour you like.
1.5m Driving Car
Voltage
12V or 24V
48V
Batteries (not included)
2 x DC24
4 x DC24
(“single pack”)
$2500
$2700
1.6m Driving Car
48V
8 x DC24
$2900
(“double pack”)
DC24 Battery
$295
“F” TYPE BOGIES
Heavy duty commercial rated bogies with loco
style axleboxes with compensated suspension.
These are designed to carry the extra heavy
loads of batteries and crew on driving cars.
As shown, with mechanical brakes $1045 ea.
Also available without brakes for $895 each
Page 9 of 12
ENCLOSED PASSENGER CARS







Essential for all commercial applications and
strongly recommended for private and club
use, enclosed passenger cars provide a far
greater level of passenger safety than
straddle cars and mean that there is no
footwear restriction on passengers.
As an added bonus, the large sides allow the
owner a wide range of decoration options to
customise their train and give it real
character.
Available as independent cars or as
articulated multi car sets.
Articulated sets require:
o an “A” type car at the front. This has
two bogies, a bar coupler at the
front and a ball coupling at the rear.
o A “B” type car at the rear. This has
just one bogie (at the rear) and
shares its weight onto the back of
the “A” car through a ball socket
coupling and tilt limit bars.
o Sets can be extended by adding intermediate “C” cars or by bar coupling to other
sets.
Electric train brakes are available as an option. Many clubs require train brakes for sets
longer than two cars.
Standard cars are approx. 2.5m long between coupler centres - approx. 2.2m seat length. A
five car set will fit (just) in one piece into a 40ft shipping container.
MTS “G” type bogies are standard.
Cars are supplied with frames in primer and with bare unpainted cladding to allow for decoration.
Decorated cost depends on design and prices are available on application.
“Independent” Car with two “G” type bogies
“A” Car with two “G” type bogies
“B” Car with one “G” type bogie
“C” Car with one “G” type bogie
$3290
$3490
$2795
$2995
“G” Type Bogie Only (as shown - unbraked)
“G” Type Bogie Only (mechanical brakes)
Electric Brake Actuator
$695
$845
$220
Page 10 of 12
7 ¼” GAUGE and 5”+7 ¼”
DUAL GAUGE STEEL TRACK

This is our tried and proven
commercial grade track.

25x12mm flatbar steel rails MIG
welded to 50x6mm flatbar sleepers
and painted in red oxide.

Straights are multiples and fractions
of 3.0m

Curves are multiples of 15 degrees

3mm gauge spread on curves

Track spacing approx. 2m when used
commercially

Availability depends mainly on
quantity of track required and
current workshop commitments.
7 ¼” Gauge
Dual Gauge
1.5m Straight
$156
$211
3.0m Straight
$294
$397
(Specify if connecting directly to a curve so that gauge can be spread at one or both ends)
10m Radius, 15 degree curve
$270
$342
$384
$365
$462
$518
Large Radius left or right points
 10m radius, 15 degrees
 3m straight length
 Electric Point motor to suit
 4 Channel Remote Control Kit
$880
$1270
$350
$595
$375
$595
$550
$880
See Feb 2012 Newsletter
30 degree diamond (1.5m straight length)
Page 11 of 12
TRACK BUILDING TOOL KITS
For building your own track, each kit comprises:







6 x Straight Gauge Bars (in gauge)
2 x Intermediate Gauge Bars (gauge + 1mm for 3 ½” gauge, gauge plus 1.5mm for 5” & 7 ¼”)
6 x Curve Gauge Bars (gauge + 2mm for 3 ½” gauge, gauge plus 3mm for 5” & 7 ¼”)
Rail end drilling jig
6 x Sample laser cut rail joiners
Rail joiner mounting jig
Track building instruction manual
These jigs are designed for flat bar steel rail as follows:
3 ½” Gauge and 5” Gauge
25x10mm
(25x12mm version also available for 5” gauge when dual with 7 ¼” gauge)
7 ¼” Gauge
3 ½” Gauge
5” Gauge
7 ¼” Gauge
25 x 12mm
$119
$119
$139
3 ½” & 5” Together
5” & 7 ¼” Together
$199
$219
TRACK COMPONENTS
Laser cut rail joiners are a great time saver and produce a better result than hand-made ones.
Sleepers can of course be cut and de-burred by file or grinder from 50x6 flat bar or other sleeper
material of your choice. From experience you’ll get pretty tired of that after a few hundred so we
also sell our 50x6 steel laser cut sleepers.
Rail Joiners – Pack of 50
Sleepers – 5” Gauge – Pack of 100
Sleepers – 7 ¼” Gauge – Pack of 100
$175
$459
$585
(295mm long. Also suits 3 ½” + 5” Dual Gauge)
(395mm long. Also suits 5” + 7 ¼” Dual Gauge)
FAQs:
Q: What tools do I need to build steel track?
A: The usual range of hand tools, plus a welder (preferably a MIG) and if building under about 10m
radius, a bar rolling machine (hand operated is OK). Overall budget $2000 to $5000.
Q: Do I need a jig to build my track in?
A: Of course you can lay and weld track in situ and shape it to suit the landscape, but for flexibility jig
built modular track works best. Jigging Straight track is easy, curved track and points are more
complex. MTS makes track building jigs to order – POA.
Q: Can triple gauge track be made?
A: Yes. Prices on application. Points are tricky but by no means impossible.
Page 12 of 12

february 2012 pricelist 5” gauge section maxitrak – mts 5”

Transcription

Similar documents

AeroForce Dual Interceptor Gauge (05

Quadco`s Forespro® delimbers are engineered with the highest

supplement - Railways of the Far South

Leveling Slitting Stretcher Leveling

The Lakeshore Special - Cuyahoga Valley S Gauge Association

HAT CHANNEL INSTRUCTIONS 1. The details

Just the Ticket

Issue No. 53

CS-X Saw Chain Sharpener

Vinyl Liner Selection