bushmaster® varminter rifle

Transcription

ordering information
What goes into a bushmaster®
is What makes it a bushmaster.
Hard-coated aluminum receivers
are corrosion-proof, lightweight
and abrasion resistant.
All Bushmaster® barrels are
precision-machined from 4150
chrome moly-vanadium steel
and hardened to C26-33 on the
Rockwell scale for the utmost in
accuracy and longevity. Barrels are
also chrome lined for added
corrosion resistance.
since 1978, the finest
commercial ar-style
platform rifles in
the World
• Bushmaster® is the leading supplier of AR-style rifles
and accessories in the U.S.
• Preferred choice of domestic, state and local
law enforcement
• Serving law-enforcement agencies and militaries
of more than 50 foreign nations
• A leading choice for competitive and recreational
shooters and hunters
2
phone orders: 1.800.998.7928
Our highly efficient gas operating
system delivers impeccably smooth,
rapid cycling while significantly
reducing felt recoil.
Relentless testing with
over 6 million rounds
fired each year.
torture tested,
battle proven
• Bushmaster® firearms and accessories undergo a
rigorous testing process to ensure the highest levels
of ruggedness, longevity and precision
• Proved by 32 years of experience in law enforcement,
foreign military service, competitive shooting and
hunting worldwide
consistency, accuracy
and quality control
• Every Bushmaster® component is scrutinized and
precision-tuned to deliver unmatched accuracy
• Bushmaster® barrels are made exclusively from fine
4150 chrome moly-vanadium steel
• Unmatched quality control with the most stringent
series of inspections in the industry
ANY PROBLEM,
ONE SOLUTION.
BUShMASTER® ACRTM
(AdAPTIvE COMBAT RIfLE).
ThE wORLd’S MOST AdAPTIvE
MOdULAR RIfLE.
• The first of its kind, and designed to master
the extreme scenarios faced in the world of
law enforcement and personal defense
• Redefines the term “modular” with the extra
ordinary ability to change calibers, barrel lengths
and stock configurations in minutes — without
the use of any tools
• Born of a collaborative effort between Bushmaster,®
Magpul® and Remington® to create the ultimate
military combat weapons system
• Built specifically for law enforcement and
tactical markets
• Tested in the most brutal conditions on earth
• Now available in State Compliant, ORC,
Basic Folder, Enhanced and LE
TABLE Of CONTENTS
ACR™ .................................................................4
Large Bore Rifles...................................................6
Hunting Rifles.......................................................7
Patrolman Rifles .................................................10
MOE™ Series Rifles ............................................12
Competition Rifles ...............................................16
Law Enforcement Rifles........................................19
Price List............................................................20
Receivers ...........................................................22
Barrel Assemblies................................................27
Muzzle Brakes ...................................................37
Magazines .........................................................39
Pistol Grips and Buttstocks ...................................45
Hand Guards and Accessories ................................53
Gunsmithing Accessories ......................................56
Sights, Scopes and Mounts ..................................67
Apparel .............................................................82
www.BUShMASTER.COM
3
Bushmaster® aCrtm adaptive ComBat rifles
as mission-adaptaBle as the
professionals it’s Built to serve.
Bushmaster® ACRTM Basic ORC
(ACR SS 16M40RC B) (90836) Black
(ACR SS 16M40RC C) (90837) Coyote
Bushmaster® ACRTM A-TACS® Basic
(ACR SS 16M4 A) (90820)
one rifle for an infinite numBer
of extreme sCenarios
orC & BasiC aCrtm features
• 16 ½" cold hammer-forged barrel with melonite
coating for extreme long life
• A2 birdcage-type hider to control muzzle flash
• Adjustable, two-position, gas piston-driven system
for firing suppressed or unsuppressed, supported by
hardened internal bearing rails
• Tool-less, quick-change barrel system available in
10.5", 14.5" and 16.5" and in multiple calibers
• Multi-caliber bolt carrier assembly quickly and easily
changes from 223/5.56mm NATO to 6.8mm Rem
SPC (spec II chamber)
• Free-floating MIL-STD 1913 monolithic top rail for
optic mounting
4
phone orders: 1.800.998.7928
• Fully ambidextrous controls including magazine
release, bolt catch and release, fire selector and
non-reciprocating charging handle
• High-impact composite hand guard with heat
shield — accepts rail inserts
• High-impact composite lower receiver with
textured magazine well and modular grip storage
• Fixed high-impact composite A-frame stock with rubber butt pad and sling mounts (ORC & A-TACS®)
• Folding and six-position telescoping high-impact
polymer stock with rubber butt pad and sling
mount (basic folder only)
• Magpul® MBUS front/rear flip sights (basic only)
• Ships in oversized hard case for accessory
storage, includes 30-round PMAG™
Bushmaster® State-Compliant ACR™
State-compliant acR™ FeatuReS
• Permanently pinned and welded Izzy
muzzle brake
• Tool-less quick change-over barrel system
available in multiple calibers
• Free-floating MIL-STD 1913 monolithic top rail
for optic mounting
• Two-point push-button sling front
Bushmaster® Basic ACR™ Folder
(ACR SS 16M4BF B) (90838) Black
(ACR SS 16M4BF C) (90847) Coyote
• Folding and six-position telescoping
high-impact polymer stock with rubber butt
pad and sling mounts
Bushmaster® ACR™ Enhanced Configuration
(ACR FR 16M4 B) (90704)
Bushmaster® ACR™ Enhanced
Configuration
(ACR FR 16M4 C) (90705)
enhanced acR
tm
FeatuReS
All the attributes of the basic ACR with these
additional features:
• AAC® blackout flash hider with exceptional
signature reduction
• Three-sided aluminum hand guard with integral
MIL-STD 1913 rail for accessory mounting
™
Order #
Caliber
ACR SS 16M4 BP
ACR SS 16M4 A
ACR FR 16M4 B
ACR FR 16M4 C
ACR SS 16M4BF B
ACR SS 16M4BF C
ACR SS 16M4ORC B
ACR SS 16M4ORC C
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
• Folding and six-position telescoping
high-impact polymer stock with rubber
butt pad and sling mounts
• Two-point push-button sling front
AdAptive
ptive CombAt Rifles
(ACR SS 16M4 BP) (90720)
Complete listing of ACRTM parts
and accessories section on page 46.
Weight w/o Overall Barrel Muzzle Barrel
Magazine Length Length
8.2 lbs.
8.2 lbs.
8.2 lbs.
8.2 lbs.
8.2 lbs.
8.2 lbs.
8.0 lbs.
8.0 lbs.
35"
35"
33"-36"
35"
33"-36"
33"-36"
35"
35"
16.5"
16.5"
16.5"
16.5"
16.5"
16.5"
16.5"
16.5"
½ x 28
½ x 28
½ x 28
½ x 28
½ x 28
½ x 28
½ x 28
½ x 28
MSRP
4150 chrome-moly steel w/melonite-coated bore/chamber
$2,343
$2,540
$2,699
$2,699
$2,490
$2,490
$2,343
$2,343
www.buShmaSteR.com
5
Large BOre
The BushmasTer ® Ba50.
mOnsTrOus LOng-range pOwer meeTs LOng-range accuracy.
Bushmaster® BA50 Carbine
(BCW3M 22-50BMGLW) (90101)
Bushmaster® BA50 Rifle
(BCW3M 30-50BMGLW) (90102)
• Rifle (30" barrel) and carbine (22" barrel) versions
• Rate of twist: 1 in 15"
• Barrel free-floated within vented fore-end
• Bolt action: bolt is on left side of receiver
• Magpul® PRS adjustable buttstock with LimbSaver®
recoil pad
• High-efficiency recoil-reducing brake minimizes rearward
force comparable to 243 Win
• Disassembles like an AR-type rifle for cleaning
and maintenance
• MIL-STD 1913 rail at 12 o’clock position on
vented fore-end
• Lower receiver machined from T6-6061
aluminum billet
• Steel bipod with folding legs
• ErgoGrip Deluxe Tactical pistol grip
• Manganese phosphate finish on steel parts
• Hard anodized black finish on aluminum parts
(mil. spec.)
• Shipped with Storm hard case and two
10-round magazines
Big-BOre pOwer wiTh The speed and versaTiLiTy
Of ar-sTyLe rifLe.
450 Bushmaster® Rifle (shown)
(BCWVMS 20-45) (90431)
450 Bushmaster® Carbine
(BCWVMS 16-45) (90425)
• 20" barrel rifle or 16" barrel carbine with 1 in 24" twist
• Upper and lower receivers made of mil. spec. aluminum
• Barrels free-floated within fore-ends for peak accuracy
Order #
Caliber
BCW3M 22-50BMGLW
BCW3M 30-50BMGLW
BCWVMS 20-45
BCWVMS 16-45
50 BMG
50 BMG
450 Bushmaster
450 Bushmaster
6
• Izzy muzzle brake and gas-impingement system
reduce recoil to a moderate thump for optimum
multiple-shot control
• Shipped with hard case, yellow safety block,
5-round magazine and manual
Weight w/o Overall Barrel Muzzle
30 lbs.
30 lbs.
8.3 lbs.
8.1 lbs.
50"
58"
39.5"
35.5"
phOne
1.800.998.7928
OrdersOrders:
24 hOurs:
1.800.998.7928
22"
30"
20"
16"
1"-14UNS-ZA
1"-14UNS-ZA
11/16 x 24
11/16 x 24
Barrel
MSRP
Lothar Walther barrel, free-floating with vented fore-end
Lothar Walther barrel, free-floating with vented fore-end
4150 chrome-moly steel w/coated bore/chamber
$5,262
$5,299
$1,441
$1,426
308 HUNTING
308 hunter and 308 vista hunter.
Bushmaster® 308 Hunter Rifle
(BCWVMS 30820F Hunter) (90821)
Bushmaster® 308 Vista Rifle
(BCWVMS 30820F Vista) (90822)
• 20" fluted 4150 chrome moly-vanadium
barrel with crowned muzzle
• Mid-length gas system for smoother recoil
• Free-floating, vented aluminum fore-end
• Hogue® rubberized pistol grip
• A2 grip on Vista
• Standard A2 stock
• Two ¾" mini-risers for optics mounting
• MOE™ trigger guard for gloved finger
• Ships in lockable hard case, operator’s
safety manual and 5-round magazine
308 orc rIfle. for sHooTers wHo INTeNd To
ImmedIaTely add THIrd-parTy opTIcs.
Bushmaster® 308 ORC
(BCWVMF 30816ORCE) (90702)
• Caliber — 308 Win/7.62 NATO 18"
heavy profile with mid-length gas system
and A2 birdcage flash hider
• Receiver length Picatinny optics rail with
two ½" optics risers
• Milled gas block
Order #
Caliber
BCWVMS 30820F Hunter
BCWVMS 30820F Vista
BCWVMF 30816ORCE
308 WIN./7.62 NATO
308 WIN./7.62 NATO
308 WIN./7.62 NATO
• Heavy oval hand guards
• Six-position telescoping stock – reduces
overall length by 4" when collapsed for
convenient carry
• Shipped in a lockable hard case with
operator’s safety manual, 20-round
magazine and yellow safety block
8.2 lbs.
8.2 lbs.
7.75 lbs.
35"
35"
37.25"
16.5" 5/8 x 24
16.5" 5/8 x 24
16" 5/8 x 24
large bore/308 hunting
Available in Camo
Barrel
MSRP
Chrome-moly steel w/coated bore/chamber
$1,518
$1,618
$1,418
www.bUsHmasTer.com
7
Bushmaster® Predator rifles
Bushmaster® Predator Rifle
(PCWVMS 20FPRED8) (90629)
a slightly shorter, lighter Bushmaster ® — the quickest,
most deadly Predator in the food chain.
• 20" Bushmaster® barrel is fluted 4150 chrome molyvanadium steel (non-chrome-lined) with sharp 1 x 8"
twist rifling for the heavier bullets typically used on bigger
varmints and predators
• Features include a hybrid SAAMI spec. chamber
• Vented tubular aluminum free-floater fore-end with
bipod stud
• Hogue® rubberized pistol grip
• 5-round magazine (legal for hunting in most states)
• Shipped with safety bock and operator’s manual in a
lockable, foam-padded hard case
• Two-stage competition trigger (3 ½-lb. takeup,
1-lb. letoff)
Bushmaster® a-tacs® Predator rifles
Bushmaster® A-TACS® Predator Rifle
(PCWVMS 20FPRED8 A) (90823)
• Coated in A-TACS® digital camouflage for superior
concealment
• Two-stage competition trigger (3 ½-lb. takeup,
1-lb. letoff)
• Fluted 20" extra-heavy Bushmaster® predator barrel
(1" dia. out to gas block) with 11" competition
muzzle crown
• Shipped with 5-round magazine and manual
in a lockable, foam-padded hard case
• 1 in 8" twist (non-chrome-lined) for the heavier bullets,
free-floated with a vented aluminum fore-end
Order #
Caliber
PCWVMS 20FPRED8
PCWVMS 20FPRED8 A
5.56mm/223 Rem.
5.56mm/223 Rem.
8
8 lbs.
8 lbs.
Phone orders: 1.800.998.7928
38.25"
38.25"
20"
20"
Crowned
Crowned
Barrel
MSRP
Fluted, chrome-moly steel (non-chrome-lined)
Fluted, chrome-moly steel (non-chrome-lined)
$1,359
$1,459
Bushmaster® Varminter rifle
Bushmaster® Varminter Rifle
(PCWVMS 24FVAR9) (90641)
• 24" extra-heavy Bushmaster® varmint
barrel (1" dia. out to gas block) with 11°
competition crowned muzzle
• Shipped with hard case, 5-round magazine
and manual
• Fluted barrel (non-chrome-lined) with a
1-in-9" rate of twist is free-floated within
the vented fore-end
• Competition two-stage trigger
(3 ½-lb. takeup, 1-lb. letoff)
Bushmaster® a-tacs® Varminter rifle
223 HUNTING
extended-range accuracy, rapid follow-ups,
light recoil and Bushmaster ® reliaBility —
Built specifically for Varmint hunters.
Bushmaster® A-TACS® Varminter Rifle
(PCWVMS 24FVAR9 A) (90824)
• Coated in A-TACS® digital camouflage for
superior concealment
• Two-stage competition trigger
(3 ½-lb. takeup, 1-lb. letoff)
• Fluted 24" extra-heavy Bushmaster® varmint
barrel (1" dia. out to gas block) with 11°
competition muzzle crown
• Shipped with hard case, 5-round magazine
and manual
• 1-in-9" twist (non-chrome-lined) free-floated
with a vented aluminum fore-end
Order #
Caliber
PCWVMS 24FVAR9
PCWVMS 24FVAR9 A
5.56mm/223 Rem.
5.56mm/223 Rem.
8.4 lbs.
8.4 lbs.
42.25"
42.25"
24"
24"
Crowned
Crowned
Barrel
MSRP
Fluted, extra heavy profile/chrome-moly steel
$1,374
$1,474
www.Bushmaster.com
9
M4-Type paTrolMan’s Carbines
M4 Type Patrolman’s Carbine (shown)
(BCWA3F 16M4) (90289)
M4 Type Patrolman’s Carbine
(BCWA2F 16M4) (90216)
ouT on paTrol, aT The range or even aT hoMe.
versaTiliTy for all of The above.
• 16" barrel is chrome-lined in both bore and chamber
• Features A2 birdcage-type suppressor to control
muzzle flash
• Six-position telestock for light weight and quick handling
• A2 (fixed handle) features 1 MOA elevation and
½ MOA windage adjustments
• A3 (removable handle) features ½ MOA
elevation and ½ MOA windage adjustments
6.8MM spC & 7.62 x 39MM Carbines
6.8mm SPC Caliber (A3 – Removable Handle)
Rifle with Telestock (shown)
(BCWA3F 16M468) (90298)
7.62 x 39mm (A3 – Removable Handle)
Rifle with Telestock
(BCWA3F 16M439) (90297)
a powerful arguMenT
for versaTiliTy of The ar plaTforM.
• 6.8mm SPC (Special Purpose Cartridge) delivers the
added power and improved terminal energy of a 270
cal.; over 2600 FPS velocity with 115-gr. bullets
• 7.62 x 39mm delivers the added power and similar
performance of a 30-30 cal.; over 2300 FPS velocity
with 122-gr. bullets
Order #
Caliber
BCWA3F 16M4
BCWA2F 16M4
BCWA3F 16M468
BCWA3F 16M439
5.56mm/223 Rem.
5.56mm/223 Rem.
6.8mm SPC
7.62 x 39mm
10
• 16" M4 profile barrel fitted with Izzy
muzzle brake
• Six-position telestock standard.
Other options available
• Shipped with hard case, sling, 26-round
magazine and manual
6.7 lbs.
6.7 lbs.
6.57 lbs.
6.57 lbs.
phone orders: 1.800.998.7928
32.5"
32.5"
32.75"
32.75"
16"
16"
16"
16"
½ x 28
½ x 28
5/8 x 24
5/8 x 24
Barrel
MSRP
4150 chrome-moly steel w/chrome-lined bore/chamber
$1,224
$1,150
$1,314
$1,314
quad rail patrolman’s carbine
Quad Rail A3
Quad Rail A2
(BCWA2F 16M4 QR) (90830)
• 16" 4150 chrome moly-vanadium barrel is
chrome-lined in both bore and chamber with
A2 birdcage-type suppressor free-float quad
rail fore-end
• Free-float quad rail fore-end increases
accuracy and enables accessory mounting
• Six-position telestock for light weight and quick
handling
• Ships with a lockable hard case, operator
safety manual, yellow safety block, sling and
30-round magazine
orc® carbines
ORC Carbine with Telestock
(BCWVMF 16M4ORC) (90391)
any optics, any purpose, anywhere.
the bushmaster ® orc ® (optics ready carbine).
• 16" M4 profile barrel is chrome-lined in both
bore and chamber
• A2 (fixed handle) birdcage suppressor
• Receiver-length Picatinny optics rail featuring
two ½" optics riser blocks
Order #
Caliber
BCWA3F 16M4 QR
BCWA2F 16M4 QR
BCWVMF 16M4ORC
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem
• Bushmaster® front flip-up sight can be mounted
over the milled gas block
• Features heavy oval M4-type handguards
• Six-position telestock reduces overall length by
4" when fully collapsed
8.2 lbs.
8.2 lbs.
6 lbs.
PATROLMAN’s cARbiNes
(BCWA3F 16M4 QR) (90831)
35"
35"
32.5"
16"
16"
16"
½ x 28
½ x 28
½ x 28
Barrel
MSRP
4150 chrome-moly steel w/chrome-lined bore/chamber $1,336
www.bushmaster.com
11
mOeTm m4-Type cARbiNe
Black
(BCWA3F 16M4 MOE) (90291)
Flat Dark Earth
(BCWA3F 16M4 MOED) (90687)
MOE™ A-TACS® Carbine
OD Green
(BCWA3F 16M4 MOEA) (90826)
(BCWA3F 16M4 MOEG) (90688)
The NO. 1 AR-STyle plATfORm
iN AmeRicA, eNhANced wiTh
mAgpul ® equipmeNT.
• 16" barrel is chrome lined in both bore and chamber
• Magpul® MBUS rear flip sight
• Magpul® MOE™ adjustable buttstock with strong
A-frame design and rubber buttplate
• Magpul® MOE™ pistol grip accepts MIAD storage cores;
30-round PMAG™
• Available in Black, OD Green, Flat Dark Earth and A-TACS®
mOeTm gAS piSTON cARbiNe
Flat Dark Earth
(BCWA3F 16M4 GP MOED) (90843)
MOE™ Gas Piston Carbine
OD Green
(BCWA3F 16M4 GP MOE) (90825)
(BCWA3F 16M4 GP MOEG) (90844)
• 16" barrel is chrome-lined in both bore and chamber
with gas piston system
• Magpul® MOE™ carbine handguard fits over gas piston
system and accepts rail sections
• Magpul® MOE vertical grip
Order #
Caliber
BCWA3F 16M4 MOE
BCWA3F 16M4 MOED
BCWA3F 16M4 MOEG
BCWA3F 16M4 MOEA
BCWA3F 16M4 GP MOE
BCWA3F 16M4 GP MOED
BCWA3F 16M4 GP MOEG
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
12
• Magpul® MOE™ adjustable stock with strong A-frame
design and rubber butt pad
• Magpul® MOE™ pistol grip, accepts MIAD storage cores
• 30-round PMAG™ in Black (all SKUs)
• Available in Black, OD Green and Flat Dark Earth
phONe ORdeRS: 1.800.998.7928
6.42 lbs.
6.42 lbs.
6.42 lbs.
6.42 lbs.
6.22 lbs.
6.22 lbs.
6.22 lbs.
32.5"
32.5"
32.5"
35.5"
35.5"
35.5"
35.5"
16"
16"
16"
16"
16"
16"
16"
½ x 28
½ x 28
½ x 28
½ x 28
½ x 28
½ x 28
½ x 28
Barrel
MSRP
$1,247
$1,247
$1,247
$1,347
$1,396
$1,396
$1,396
Flat Dark Earth (BCWA3F 16M4 ML MOED) (90839)
16" MOE™ MID-LENGTH BLACK
(BCWA3F 16M4 ML MOE) (90827)
OD Green (BCWA3F 16M4 ML MOEOD) (90840)
• 16" barrel is chrome-lined in both bore and
chamber
• Magpul® MOE™ mid-length handguard,
accepts rail sections
• Magpul® MOE™ adjustable stock with strong
A-design and rubber butt pad
• Magpul® MOE™ pistol grip, accepts MIAD
storage cores
• Magpul® MOE™ vertical grip
• Available in Black, Flat Dark Earth and
OD Green
safety manual, yellow safety block sling and
30-round PMAG™ in Black (all SKUs)
MOETM 308 Mid-lEngTh
Flat Dark Earth
(BCWA3F 30816 ML MOED)
(90841)
16" MOE™ 308
(BCWA3F 30816 ML MOE) (90828)
• 308 Win./7.62 NATO 16" heavy profile
barrel with chrome-lined bore and chamber
• Magpul® MOE™ handguard, accepts rail
sections
storage cores
Order #
Caliber
BCWA3F 16M4 ML MOE
BCWA3F 16M4 ML MOED
BCWA3F 16M4 ML MOEOD
BCWA3F 30816 ML MOE
BCWA3F 30816 ML MOED
BCWA3F 30816 ML MOEG
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
308Win./7.62 Nato
308Win./7.62 Nato
308Win./7.62 Nato
OD Green
(BCWA3F 30816 ML MOEG)
(90842)
• Magpul® ACS adjustable stock storage
compartments and rubber butt pad
• 20-round MAG™ in Black (all SKUs)
• Available in Black, Flat Dark Earth and OD Green
safety manual, yellow safety block, sling and
30-round PMAG™ in Black (all SKUs)
5.9 lbs.
5.9 lbs.
5.9 lbs.
6.10 lbs.
6.10 lbs.
6.10 lbs.
32-7/8"
32-7/8"
32-7/8"
34"
34"
34"
16"
16"
16"
16"
16"
16"
½ x 28
½ x 28
½ x 28
modular carbine / moe™ series
MOETM Mid-lEngTh
Barrel
5/8 x 24 4150 chrome-moly steel w/coated bore/chamber
MSRP
$1,247
$1,247
$1,247
$1,448
$1,448
$1,448
www.bushMasTEr.cOM
13
MOE™ dissipatOr
Flat Dark Earth
(BCWA3F 16D MOED) (90845)
MOE™ Dissipator
OD Green
(BCWA3F 16D MOE) (90829)
(BCWA3F 16D MOEG) (90846)
• 16" heavy profile barrel with chrome-lined bore and
chamber, rifle length sight radius
• Magpul® MOE™ rifle length handguard, accepts rail
sections
• Magpul® ACS adjustable stock storage compartments
and rubber butt pad
storage cores
• Available in Black, Flat Dark Earth and OD Green
• Ships with a lockable hard case, operator safety
manual, yellow safety block, sling and 30-round
PMAG™ in Black (all SKUs)
a.r.M.s. M4-typE carbinE
ARMS M4-Type Carbine with Telestock
(BCWA3F 16M4 ARMS) (90290)
this M4-typE givEs yOu frOnt and rEar flip
sights, allOwing fOr Optics and irOn sights in
thE saME carbinE.
• 16" barrel is chrome-lined in both bore
and chamber
• A.R.M.S. 41-B front flip sight and A.R.M.S. 40 rear flip
sight for instant conversion to optics mounting
Order #
Caliber
BCWA3F 16D MOE
BCWA3F 16D MOED
BCWA3F 16D MOEG
BCWA3F 16M4 ARMS
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
14
• Magpul® MOE™ adjustable buttstock with
strong A-frame design and streamlined look;
30-round PMAG™
• Hogue® pistol grip for non-slip handling
6.42 lbs.
6.42 lbs.
6.42 lbs.
6.22 lbs.
phOnE OrdErs: 1.800.998.7928
32.5"
32.5"
32.5"
32.5"
16"
16"
16"
16"
½ x 28
½ x 28
½ x 28
½ x 28
Barrel
MSRP
$1,247
$1,247
$1,247
$1,568
a-tacs® m4-type carbine
(BCWA3F 16M4-ATAC) (90694)
the no. 1 ar-style platform in america,
enhanced with magpul ® original equipment.
chrome-lined in both bore and chamber
• Features A2 birdcage-type suppressor to
control muzzle flash
• A-TACS® coated upper/lower receivers, stock,
pistol grip, delta ring and hand guards
• Six-position telestock for light weight and
quick handling
• Receiver-length Picatinny optics rail
• A.R.M.S.® 40L low profile flip-up rear sight
• Shipped in a lockable hard case with operator's
safety manual, 30-round magazine, yellow safety
block and black web sling
• One-year Bushmaster® warranty
gas piston orc
Bushmaster® Gas Piston ORC
(BCWA3F 16M4 GP NS) (90805)
this gas piston carbine was developed for
shooters who intend to add 3rd-party optics.
• Ultra-reliable, cool-operating gas piston
operating system
• Accepts wider range of ammunition; less
gas pressure required to operate
• Offers improved reliability with cleaner
operation and reduced recoil
• Prevents fouling of the upper receiver and
bolt carrier
Order #
Caliber
BCWA3F 16M4-ATAC
BCWA3F 16M4 GP NS
5.56mm/223 Rem.
5.56mm/223 Rem.
• Easy cleaning of hard chrome-plated piston;
access via detented plug in the gas block
chrome-lined in both bore and chamber with
A2 birdcage-type suppressor
• Six-position adjustable telestock
• Shipped with hard case, yellow safety block,
sling, 30-round magazine and manual
6.22 lbs.
6.6 lbs.
35.5"
32.5"
16"
16"
½ x 28
½ x 28
Barrel
MOE™ SERIES/EnhancEd M4
A-TACS® M4-Type Carbine with Telestock
MSRP
4150 chrome-moly steel w/chrome-lined/chamber $1,336
4150 chrome-moly steel w/chrome-lined/chamber $1,336
www.bushmaster.com
15
COMPETITION/CarbON 15
TaC-drIvINg ar-sTylE aCCuraCy, MIlITary-PrOvEN PErfOrMaNCE.
DCM-XR (A3 – Removable Handle)
(PCWA3S 20DCM8XR) (90581)
DCM-XR (A2 – Fixed Handle) (shown)
(PCWA2S 20DCM8XR) (90543)
• Competition front sight available in either .052" or
.062" widths
• Two-stage competition trigger, factory set for a
3.5-lb. first stage and a 1-lb. letoff, per CMP/NRA
competition regulations
• Shipped with hard case, sling, two 10-round
magazines and manual
• Heavy 1", match-grade, button-rifled barrels with
1-in-8" twist
• Stay StraightTM dual aperture rear sight modified to
accept four sizes
• Buttstock features a 3.62-lb. lead
counterbalance weight
aMazINg ar-sTylE aCCuraCy IN yOur ChOICE Of ThrEE barrEls.
20" (A3 – Removable Handle)
Chrome-Lined Barrel (shown)
Chrome-Lined Barrel
Stainless Steel Barrel
20" (A2 – Fixed Handle)
Chrome-Lined Barrel
Chrome-Lined Barrel
Stainless Steel Barrel
(BCWA3S 20) (90325)
(BCWA2S 20) (90242)
(BCWA3S 24) (90333)
(BCWA2S 24) (90247)
• A2 (fixed handle) upper receiver features a
300-800 meter rear sight system (with 1 MOA
elevation and ½ MOA windage adjustments)
• A3 (removable handle) upper receiver has a
300-600 meter rear sight system with ½ MOA
elevation and windage adjustments
• Shipped with hard case, sling, 30-round magazine
and manual
Order #
Caliber
PCWA3S 20DCM8XR
PCWA2S 20DCM8XR
BCWA3S 20
BCWA2S 20
BCWA3S 24
BCWA2S 24
BCWA3S 20SS
BCWA2S 20SS
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
16
(BCWA2S 20SS) (90246)
• A3 (removable handle) upper receiver features a
Picatinny mounting rail for easy attachment of
most accessory sights, scopes or optic devices
• 4150 Chrome-moly steel barrels available
in 20" and 24" lengths
• Available with optional polished stainless
steel barrel
13.85 lbs.
13.5 lbs.
8.78 lbs.
8.43 lbs.
9.29 lbs.
8.93 lbs.
8.78 lbs.
8.43 lbs.
PhONE OrdErs: 1.800.998.7928
(BCWA3S 20SS) (90331)
38.5"
38.5"
39.5"
39.5"
43.5"
43.5"
39.5"
39.5"
20"
20"
20"
20"
24"
24"
20"
20"
Barrel
Crowned 1" diameter competition, chrome-moly vanadium steel
Crowned 1" diameter competition, chrome-moly vanadium steel
Heavy profile chrome-lined bore/chamber
½ x 28
Heavy profile chrome-lined bore/ chamber
½ x 28
½ x 28
½ x 28
Polished 416 stainless steel
½ x 28
Polished 416 stainless steel
½ x 28
MSRP
$1,381
$1,306
$1,187
$1,112
$1,202
$1,127
$1,187
$1,112
Carbon 15 Flat-top Carbine
Comes with a Flat top and Flat out-perForms
other Carbines.
(AZ-C1516M4FT) (90728)
Carbon 15 SuperLight ORC Optic
• Durable Carbon 15 composite receivers are
an amazing 40% lighter than comparable
aircraft aluminum receivers; includes
Picatinny rail for simple optics mounting
• 16" M4 profile barrel chambered for
5.56mm/.223 Rem. is chrome-lined
• Muzzle fitted with Izzy flash suppressor
(MAZ-C1516SLORC) (90689)
• AR-type front sight; dual aperture flip-up
rear sight
• SuperLight 16" threaded 1x9 barrel twist
• 4-position fiberite telestock
• Shipped with optic hard case, sling, 30-round
magazine and manual
bushmaster® pistols
For durability, reliability and outstanding
Control, there are no rivals.
Carbon 15 Type 21S
(AZ-C15P21S) (90735)
Carbon 15 (9mm) Pistol Type 21S
(AZ9-C15P21S) (90744)
Pit Viper Pistol Type AP21
(AP-21) (90711)
• Receivers and other parts are molded
of super-durable, water-resistant
Carbon 15 composite
• Stainless steel match grade barrel includes
an A2 birdcage flash suppressor
Order #
Caliber
AZ-C1516M4FT
MAZ-C1516SLORC
AZ-C15P21S
AZ9-C15P21S
AP-21
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
9mm
5.56mm/223 Rem.
• Bolt carrier is black oxide finished; other critical
steel parts are manganese phosphate finished
for superior corrosion and rust protection
• Picatinny optics rail with integral dual
aperture rear sight and an A2-type square
post front sight
5.77 lbs.
5.50 lbs.
3.25 lbs.
2.88 lbs.
3.49 lbs.
32.75"
32.75"
20"
20"
23"
16"
16"
7.25"
7.25"
7.25"
½ x 28
½ x 28
½ x 28
½ x 36
½ x 28
competition/carbon 15
Carbon 15 “Flat-Top” Carbine
Barrel
MSRP
416 match-grade stainless steel
416 match-grade stainless steel
$905
$820
$845
$845
$874
www.bushmaster.Com
17
ACRTM PATRol
ACRTM Patrol Carbine
(ACRPSS 16M4 B) (90723)
WiTh A 16 ½” Cold hAMMeR-foRged bARRel And AAC
blACkouT flAsh suPPRessoR, This Rifle is PeRfeCT foR
The lAW enfoRCeMenT PRofessionAl.
• AAC Blackout flash hider with exceptional signature reduction, compatible with AAC ratchet-mount suppressors
• Adjustable, two-position, gas piston-driven system for firing suppressed or unsuppressed, supported by hardened
internal bearing rails
• Tool-less quick-change barrel system available in
10.5", 14.5", 16.5" and in multiple calibers
• Ships in nylon soft case for law enforcement
use, includes 2-point push button sling and three
30-round PMAGs
ACRTM sPeCiAl PuRPose
ACRTM Special Purpose Carbine
(ACRPFR 14M4 B) (90721)
(ACRPFR 16M4 B) (90722)
The six-PosiTion TelesCoPing sToCk And 14 ½" bARRel effeCTively
AdAPTs To The MulTiTude of dynAMiC TACTiCAl enviRonMenTs.
All the attributes of the ACRTM Patrol model with these additional features:
• 14 ½" and 16 ½"cold hammer-forged barrel with an
innovative coating for extremely long life
• Folding and six-position telescoping high-impact polymer
stock with rubber butt pad and sling mounts
Order #
Caliber
ACRPSS 16M4 B
ACRPFR 14M4 B
ACRPFR 16M4 B
5.56mm/223 Rem.
5.56mm/223 Rem.
5.56mm/223 Rem.
18
• Ships in nylon soft case for law enforcement use,
includes single point sling and three 30-round
PMAG™ magazines
8.2 lbs.
8.3 lbs.
8.3 lbs.
Phone oRdeRs: 1.800.998.7928
35"
32-35"
32-35"
16.5"
14.5"
14.5"
½ x 28
½ x 28
½ x 28
Barrel
MSRP
POR
POR
POR
Law enforcement
whether defending freedom or enforcing Law,
the m4-type has proven reLiabLe for both.
• 14.5" barrel is chrome-lined in both bore
and chamber
• A2 birdcage flash suppressor to control
muzzle flash and rise
• Available in A2 (fixed handle) or A3
(removable handle)
• Six-position telescoping buttstock for light
weight and quick handling
• Shipped with hard case, sling, magazine
and manual
11.5" Barrel
(A3 – Removable Handle)
Entry Carbine
(BCWA3F 11.5) (90260)
compact and powerfuL, the 11.5" barreL works
hard even in tight quarters.
• Six-position telescoping buttstock for light
weight and quick handling
• Shipped with hard case, sling, magazine
and manual
• 11.5" barrel is chrome-lined in both bore
and chamber
• A2 birdcage flash suppressor to control
muzzle flash and rise
• Available in A2 (fixed handle) or
A3 (removable handle)
Order #
Caliber
BCWA3F 14M4
BCWA3F 11.5
5.56mm/223 Rem.
5.56mm/223 Rem.
6.22 lbs.
6.11 lbs.
law enforcement
M4A3 Carbine with Telestock
(BCWA3F 14M4) (90274)
31"
28"
14.5"
11.5"
½ x 28
½ x 28
Barrel
MSRP
Chrome-moly steel w/chrome-lined bore/chamber
Chrome-moly steel w/chrome-lined bore/chamber
POR
POR
www.bushmaster.com
19
PRICE LIST
AddITIonAL fIREARmS noT Shown LISTEd bELow
Order No.
AZ-C15P97S
BCWA2F 16M468
BCWA2F 11.5/5.5
BCWA3F 11.5/5.5
BCWA2F 14M4IZ
BCWA3F 14M4IZ
BCWA2F 16
BCWA3F 16
BCWA2F 16SL
BCWA3F 16SL
BCWA2F 16D
BCWA3F 16D
BCWVMF 16FMC
PCWVMS 16
PCWVMS 20AH
PCWVMS 24AH
PCWVMS 24-9SS
AZ-C15M4PRE
AZC-C15RM4FT
AZ9-C15R16FT
AZ-C15P97
Magazines
Order #
F1001693
F1001691
F1001692
F1001690
F1009066
SAP#
90737
90217
90198
90262
90207
90275
90212
90280
90218
90304
90213
90281
90386
90611
90626
90639
90636
90732
90751
90747
90736
Description
AR15 Magazine
AR15 Magazine
AR15 Magazine
AR15 Magazine
Magazine Coupler
Tools | Tool Kits
Order #
—
Description
7.25" Carbon 15 Type 97S Pistol w/Stainless Steel
16" 6.8mm SPC Carbine - A2
11.5" Carbine - A2
11.5" Carbine - A3
14.5" M4A2 Type Carbine
14.5" M4A3 Type Carbine
16" Heavy Barrel Carbine - A2
16" Heavy Barrel Carbine - A3
16" SuperLight Carbine - A2
16" SuperLight Carbine - A3
16" “Dissipator” Carbine - A2
16" “Dissipator” Carbine - A3
16" Modular Carbine w/Telestock
16" V Match Carbine
20" V Match Rifle
24" V Match Rifle
24" Stainless Varmint Special
14.5" Carbon 15 Model 4 Carbine
16" Carbon 15 “Top Loading” Carbine
16" Carbon 15 9mm Carbine
7.25" Carbon 15 Type 97 Pistol
Caliber
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
Multi-tool
Caliber
Multi-tool
Any AR Rifle
F1001694
Field Repair Kit
F1009976
Emergency Survival Kit w/ Sight tool
F1009116
Lost Parts Kit
F1009887 Bolt Carrier Assembly (with Key Staked On)
F1009935
Bolt Assembly (complete)
F1009693
Lower Receiver Parts Kit
F1009974
Charging Handle Assembly
F1009069
Izzy Flash Suppressor (Compensator)
F1009497 Armorer's Wrench (for Newest Model Telestocks)
F1009055
Drift 4 piece Punch Set
F1009325
Hand Guard Tool
F1009333
IMP1 Receiver Push Pin Tool
F1009056
Competition Trigger
F1009033
Single Point Tactical Harness
F1009022
STRAC Grip
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
Scope Mounts
Order #
Description
—
Tactical Scope Mounts
F1009397
B.M.A.S. Mini Scope Risers (½" riser)
F1009433
B.M.A.S. Rear Flip Sight (Clamp On)
F1009472
B.M.A.S. Rear Flip Sight (Low Profile)
F1009416 B.M.A.S. Front Flip Sight (For V Match Rifles & Carbines)
Stocks|Grips|Handguards|Stock Assb.
Order #
Multi-tool
F1009487
Pistol Grip (A2)
F1009538
Telestocks Butt Pad
F1009360
Telestock Assembly (Original Style Fiberite)
F1009471
4-Rail Split Handguards (Carbine)
F1009477
Handguard Rails (carbine)
Cleaning Kits
Order #
F1001695
F1008999
F1008998
F1008997
F1008996
F1008995
Chemicals
Order #
F1008994
F1008993
F1008992
F1008991
F1008990
F1008989
Description
AR Starter Kit
Universal Cleaning System w/Squeeg- e
Military Cleaning System w/Squeeg-e
Shotgun Cleaning System w/Squeeg-e
Rifle Cleaning System w/Squeeg-e
Pistol Cleaning System w/Squeeg-e
Description
Bore Cleaner/Polish
Bore Cleaner/ Polish
Bore Rinse
Bore Rinse
Premium Lubricant
Premium Lubricant
Capacity
5
10
20
30
30
Materials
Stainless steel
Stainless steel
Stainless steel
Stainless steel
Polymer
Packaging
Clampack
Clampack
Clampack
Clampack
Clampack
Each UPC#
604206116932
604206116925
604206116918
604206116901
604206129635
MSRP
$23.90
$23.90
$25.90
$25.90
$26.20
Details
Materials
Packaging Each UPC#
10 AR specific tool bits, carbon scrapper, dental pick,
3/16" pin punch, flat blade screwdriver on pocket clip,
Machined Steel
Box
—
A2 front sight adjustment tool, 8/32 threaded end
Includes: High breakage and loss items for AR15
—
Clampack 604206116895
Packed in a belt mountable carrying case
—
Clampack 604206129376
Most critical springs, detents, inserts, pins
—
Clampack 604206129383
Complete bolt & bolt carrier assembly
Chrome-lined
Clampack 604206129390
Bolt, extractor assb., pins, gas rings, ejector assb.
—
Clampack 604206129406
Everything necessary to completely build up lower
—
Clampack 604206129413
Precision machined with spring loaded latch installed 7075T6 anodized aircraft aluminum, mil. spec. finish Clampack 604206129420
3 gas ports, ribbed, closed bottom
Gun steel/manganese phosphate finished
Clampack 604206129444
Hvy combo wrench for 6 position tele & bbl nut
—
Clampack 604206129499
1/16", 3/32", 1/8", 5/32"
Steel
Clampack 604206129505
Helps remove AR15/M16 two-piece handguards
—
Clampack 604206129529
For installation & removal of pivot & takedown pins
Black nylon
Clampack 604206129536
3 ½ lb.(1st Stage) and 1 lb. (2nd Stage)
—
Clampack 604206129581
—
—
Clampack 604206129642
—
Advanced polymer
Clampack 604206129659
Caliber
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
AR15 .223 Cal. / 5.56mm
Capacity
—
1 ¼" long x ½" tall
Flip-up auxiliary sight, ½ MOA windage adjustment
Flip-up sight, thumb screw, stem
Sight clamps around milled sight bases/gas blocks
Materials
Packaging Each UPC#
Z2 Alloy & Steel
Clampack
—
Anodized aircraft aluminum
Clampack 604206129574
Aircraft aluminum, black oxide finish Clampack 604206129550
Steel base, aluminum stem
Clampack 604206129567
Clampack 604206129475
Caliber
Details
Materials
AR15 .223 Cal. / 5.56mm
Standard A2 hollow grip
Molded black plastic
AR15 .223 Cal. / 5.56mm
Fits ribbed-style 6 position telestocks
Black rubber
AR15 .223 Cal. / 5.56mm
4 position
Fiberite with aluminum extrusion extension tube
AR15 .223 Cal. / 5.56mm
Position placement is 12,3,6,9 o'clock
AR15 .223 Cal. / 5.56mm Fits AR15/M16 handguards, placement 12 & 6 o'clock
Size & Container
13.5" x 5.5" x 2.5"
6" x 7.5" x 4"
6" x 7.5" x 4"
6" x 7.5" x 4"
6" x 7.5" x 4"
6" x 7.5" x 4"
Size & Container
4 oz. bottle
½ oz. bottle
4 oz. bottle
1 oz. bottle
4 oz. bottle
½ oz. bottle
Packaging
Clampack
Clampack
Clampack
Clampack
Clampack
Clampack
Packaging
Bottle
Bottle
Bottle
Bottle
Bottle
Bottle
Ask our sales representative about state-compliant rifles.
Bushmaster® Packaged Parts & Accessories (dealer sales only).
20
MSRP
$875
$1,239
$1,135
$1,209
$1,150
$1,224
$1,135
$1,209
$1,135
$1,209
$1,150
$1,224
$1,680
$1,150
$1,165
$1,180
$1,374
$905
$905
$905
$800
PhonE oRdERS: 1.800.998.7928
Each UPC
604206116888
604206129918
604206129925
604206129932
604206129949
604206129956
Each UPC
604206129963
604206129970
604206129987
604206129994
604206130006
604206130013
Packaging
Clampack
Clampack
Clampack
Clampack
Clampack
Qty Per Ctn.
10
10
10
10
10
MSRP
Qty Per Ctn.
$80.00
10
$35.90
$105.60
$11.80
$177.00
$69.50
$73.40
$37.00
$46.00
$60.80
$51.70
$33.60
$11.30
$78.00
$67.50
$52.50
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
MSRP Qty Per Ctn.
$87.30
10
$99.00
10
$151.40
10
$148.00
10
$138.00
10
Each UPC#
MSRP Qty Per Ctn.
604206129543 $24.80
10
604206129482 $22.40
10
604206129437 $124.00
10
604206129468 $254.00
10
604206129451 $67.00
10
MSRP
$65.80
$59.90
$45.90
$37.90
$37.90
$41.90
MSRP
$5.00
$2.50
$5.60
$3.70
$6.90
$2.90
Qty Per Ctn.
10
5
5
5
5
5
Qty Per Ctn.
6
12
6
12
6
12
ACCESSORIES
www.buShmAStER.COm
21
Lower receivers
A rock-soLid, reLiAbLe bAse:
bushmAster moduLAr Lower
receiver
• Receivers and components some of the most reliable on the
market
• Modular design makes part replacement/maintenance simple
• Available as complete assemblies or as stripped housings, with
or without buttstocks
Lower Receiver Assembly with Pistol Grip
(A LOW W/O STK) ............................................. $285.00
Available for Multi-Caliber
(A LOW W/O STK-MUL) ...................................... $285.00
six position teLestock And
pistoL Grip Lower receivers
• Complete lower unit with all Bushmaster components, ready to snap
onto your upper receiver
• FFL is required for purchase, or order through
your FFL dealer
* Note: Assemblies with telestocks may still be illegal in some
states. Check your state and country statutes to determine
legality. Also available — lower assembly with ATF-approved
fixed length tele-style stock.
Lower w/Telestock (A LOW TELEP) ....................... $370.00
Available for Multi-Caliber (A LOW TELE-MUL).......... $370.00
Lower w/Fixed Telestock (A LOW PERMX) ............. $370.00
stripped Lower receivers
• Build a Bushmaster rifle from the ground up with
our stripped lower receiver housings
• Machined from highest quality aircraft aluminum forgings
• Requires a Bushmaster complete lower receiver parts kit and
your choice of buttstock
• Bushmaster offers a complete rifle build-up video,
or you may also reference the U.S. government
M16A2 technical manual
Stripped Lower for 5.56mm (9349102-S)............. $200.00
Stripped Lower for Multi-Caliber (9349102-S-MUL) . $200.00
cArbon
rbon 15
stripped Lower receivers
• Molded of carbon fiber, these units are lightweight,
durable and cooler
• They are solid color throughout — no finish to wear through
• These are the same receivers we use on our “flat-top” carbine
and others
• Standard AR parts (like our lower receiver parts kit) are ready
to drop right in
C15 M4 Type Receiver (AZ15780) ...................... $200.00
C15 R21/97/97S Receiver (AZ15180) ............... $200.00
C15 P21/97 Pistol Receiver (AZ15179) .............. $200.00
trApdoor And skeLeton stock Lower receivers
• Available in solid A2 buttstock with trapdoor storage compartment or sleek, lightweight skeleton stock
• Skeleton stock features a rubber butt pad, neoprene foam sleeve over extension tube
and multiple mounting points for the Q.D. sling swivel (included)
5.56mm/.223 Caliber (A LOW STD) .................... $345.00
Available for Multi-caliber (A LOW STD-MUL) ........... $345.00
Lower w/Ace Skeleton Stock (A LOW Skeleton) ..... $425.00
*Note: FFL required for purchase of any lower receiver.
22
Phone orders: 1.800.998.7928
upper receivers
BushmAster A1
upper receivers
• This version includes an elevation adjustment
• Forward assist assembly available in either “teardrop” type
button or round type
• Aircraft quality aluminum forgings are used for superior strength,
and they include integral cartridge case deflector
• Finish is a mil. spec., non-reflective hard anodized with a baked
on dry film lube coating inside to ensure long wear and smooth
carrier operation
Complete A1 Upper Receiver Assembly (A1UR-M2 ... $160.00
Stripped A1 Upper Receiver Assembly
(8448524-M2) ................................................. $125.00
v mAtch (FlAt top)
upper receiver
• The A3 “flat-top” with its Picatinny rail allows virtually unlimited
mounting of scopes, sights and optics
• Carefully machined from 7075T6 aircraft aluminum forgings and
is complete as shown with ejection port cover and forward assist
V Match (Flat Top) Upper Receiver (VUR-M2) ......... $190.00
stripped v mAtch (FlAt top)
upper receiver
• Fully machined and hard anodize finished aircraft quality
aluminum forging ready for assembly
• Requires ejection port cover assembly and forward assist
assembly for completion
Stripped V Match (Flat Top) Upper Receiver
(8448524-V-M2)............................................... $155.00
complete A2 upper receiver
• Forged of 707 aircraft aluminum, units are machined to meet or
exceed mil. spec.
• Hard anodized to a dark gray non-reflective finish
• Includes an Integral brass deflector and a baked-on dry film lube
coating inside for long wear and smooth carrier operation
• Charging handle not included
Complete A2 Upper Receiver (A2UR-M2) ............... $195.00
BushmAster A2 stripped
upper receiver
• Fully machined, hard anodize finished forging is dry-lubed and
ready to assemble
• Ready to assemble with top Bushmaster quality parts
• Requires a rear sight, forward assist assembly and ejection port
cover assembly for completion
Bushmaster A2 Stripped Upper Receiver
(9349063-M2) ................................................. $125.00
cArBon 15 molded
upper receivers
• Tough yet lightweight, these upper receivers are molded
of carbon fiber composite originally developed for the
aerospace industry
• Impervious to corrosion, they are solid color throughout — no
surface finish to wear off
• Use these receivers to build the lightest AR-type rifle around; no
ejection port covers or forward-assist assemblies required
Carbon 15 Flat-Top Upper Receiver (AZ15747)........ $155.00
Carbon 15 Flat-Top Upper Receiver
w/Forward Assist & Dust Cover (AZ15747FADC) .... $190.00
Carbon 15 Pistol Upper Receiver (AZ15067) ............. $139.95
www.bushmaster.com
23
Lower receiver Parts & Kits
two-stage trigger griP
As used in our Predator/Varmint rifles
(TR-TS) ............................................................. $129.95
comPLete Lower receiver
Parts Kit
• Everything necessary to completely build up your lower receiver
• Kits available with either AR15-Type or M16* components
(lower receiver and auto sear are not included)
AR15-Type Lower Parts Kit
(ALOW KIT) ......................................................... $69.50
M16 Lower Parts Kit
(MLOW KIT) ........................................................ $69.50
*NOTE: M16 parts require FFL or MG Tax Stamp. M16 parts are
NOT legal for sale in California.
Dcm comPetition
comPLete
Lower receiver
Parts Kit
• Parts shown above plus our adjustable two-stage competition trigger
AR15-Type Lower Parts Kit
(ALOWKITCOMP) ................................................ $170.95
fieLD rePair Kit
• High breakage and loss items in a
heavy zip-lock bag
AR-15 (A FIELD) .......... $31.95
M-16 (M FIELD) .......... $31.95
*NOTE: M16 parts are NOT legal for sale in California.
Bushmaster Ba50 fieLD rePair Kit
• All necessary parts for emergency field repairs on the new
Bushmaster BA50 .50 BMG caliber rifle and carbine
Bushmaster BA50 Field Repair Kit
(BMG FIELD) ....................................................... $74.95
Lost Parts Kit for ar15-tyPe rifLe
• Contains all the most critical
springs, detents, inserts and pins
— will get your gun back to full
function in short order
Competition Trigger
(CP-KIT) ..................... $13.50
Bushmaster
receiver
sPring
PacKage
• Top quality Bushmaster
Spring Kit
(SM SPRING PACK) ................................................. $2.95
24
Phone orders: 1.800.998.7928
Xm15/ar15-tyPe/m16
emergency survivaL Kit
• Survival kit is packed in a belt mountable Olive Drab carrying
case
• Specify with part numbers below: A1 Type (round front sight
post) or A2 Type (square front sight post) and AR15-Type (AR)
or M16 (M) parts
Survival Kit w/A1 Sight Tool
AR-15(AR EMERG A1) M-16(M EMERG A1).............. $63.95
Survival Kit w/A2 Sight Tool
AR-15(AR EMERG A2) M-16(M EMERG A2).............. $63.95
Note: M16 parts require an FFL or Form 4 for purchase.
comPLete ar15tyPe sPare
Parts Kit
• One “super-kit” that will take
care of all your AR15-Type rifle’s
spare parts needs
Complete AR15-Type Spare Parts
Kit w/Rifle Buffer Spring
(ARPARTSKIT) .............. $39.50
Complete AR15-Type Spare Parts
Kit w/Carbine Buffer Spring
(ARPARTSKIT-C) ............$39.50
Note: If you have our fixed length
telestock, please choose the rifle
buffer spring package.
ar15-tyPe sPring
PacKage
• Normal wear springs in the gun,
including the buffer spring
Telestock Carbine
(A COMP SPR PKG-C) ............................................ $10.50
Standard A2 Solid Stock
(A COMP SPR PKG)............................................... $10.50
magPuL enhanceD
aLuminum trigger
guarD for ar15tyPe/m16
• Drop-in oversized trigger guard that
replaces the standard plastic or metal type
• Made in U.S.A. Instructions included.
(MAG015) $19.95
ar15-tyPe or M16*
aMbidextrous safety seLector
• Installs easily into your lower receiver
• For the M16 part, an FFL or a copy of your Form 4 is required
for sale
AR15-Type (MMT-0007K) ...................................... $36.95
M16* (MMT-0006K)............................................ $36.95
*M16 parts are NOT legal in California.
ar15-tyPe/M16 accu-wedge
• Accu-Wedge eliminates play
between upper and lower
receivers for a more solid feel
• Easily installed, no modifications required
• Buffers the cycling system to reduce wear on the
impacting surfaces
Accu-Wedge (ACU1B) .............................................. $6.50
aMbidextrous
Magazine reLease
• Release magazines from either side of the receiver
• Uses stock button and spring
• Made in U.S.A.
Ambidextrous Magazine Release
(8448638-ambi) ................................................. $95.95
ar15-tyPe boLt reLease
extension
• A finely machined aluminum lever to help high
power competitors get back on target faster
by keeping the forearm hand in place
(SSP-1) ..................................... $47.95
QuicK-PuLL taKedown
Pin for carbon 15
toP Loading carbine
• Makes opening the receivers of the
top loading carbine easier and faster
Quick-Pull Takedown Pin
(AZC-15120) ......................................................... $3.95
exPandabLe tensioning Pin f
for
aLL ar15-tyPe rifLes
• Designed to cure a loose fit
between older upper and
lower receivers
Expandable Tensioning Pins
(ARTP) ................................................................ $36.95
anti-waLK Pins
for xM15, ar15tyPe and M16
• Designed to prevent trigger or sear pin walkout under rapid fire
conditions
Set of Two Pins with Circlips
(WE-002) ............................................................. $6.50
offset Pin
• Adapts a Colt lower receiver
(with large hole) to M16 forward assist type upper receiver
with smaller hole
Offset Pin
(NES-06) .............................................................. $6.50
individuaL Lower receiver Parts
for Late ModeL coLt ar15-tyPes
• These are the hard-to-find parts for the late model Colts requiring
the larger .172" diameter hammer and trigger pins
Hammer (8448612-SCK) ...................................... $23.50
Trigger (8448592-SC) .......................................... $21.50
Disconnector (8448635-SC) .................................... $7.50
Hammer or Trigger Pin (8448609 C) ........................ $3.50
All 5 parts in a kit (AR COLT KIT) ............................. $53.95
M16*a2 three
shot burst set
• Installation of this set in your
M16A1 machine gun will
give you a “three-shot-burst”
capability as in the M16A2
• An FFL is required for sale,
or a copy of your Form 4.
Not legal for installation in
anything but a licensed machine gun.
M16 A2 Three Shot Burst Set
(3SHOT BURST KIT) .............................................. $63.95
M16* fuLL auto
sear
• Includes pivot pin, bushing and
spring
• Note: An FFL or Tax Stamp is
required for purchase
M16 Full Auto Sear
(8448595)......................................................... $31.95
ar15-tyPe or
M16* “re-hab” Kit
• Hammer, trigger, safety selector
and disconnector
• M16 kit must be used in a Title
II receiver for legality – an FFL
or Tax Stamp is required for sale
For Semi-Auto AR15-Type
(A REHAB) ........................................................... $35.95
For Full-Auto M16
(M REHAB) .......................................................... $35.95
*Note: M16 parts are NOT legal for sale in California.
www.bushmaster.com
25
Lower receiver parts & kits
Note the differeNces* betweeN the correspoNdiNg parts iN each drawiNg.
AR15-Type Parts
M16 Parts
Hammer with J pin 8558612-SK
Hammer with J pin 8558612-K
Note “closed” area
Trigger
8448592-S
Safety
Selector
Lever
9381367-S
Safety Selector Lever
9381367
Note “closed” area
Trigger
8448592
Disconnector
8448635
Disconnector
9349114-S
Bolt Carrier
8448507-S
Individual Parts for Lower Receivers
Bolt Catch Assembly (A BCAT ASS) ............................... $6.50
Bolt Catch (8448628) ............................................... $5.50
Bolt Catch Spring (8448633) ...................................... $ .55
Bolt Catch Plunge (8448634)...................................... $ .55
Bolt Catch Pin (MS16562-119) ................................... $ .55
Buffer Detent (8448582) .......................................... $1.60
Buffer Detent Spring (8448583) .................................. $ .55
AR15-Type Disconnector (9349114-S) ......................... $5.95
M16 Disconnector* (8448635) .................................. $5.95
Disconnector Spring (8448594) ................................... $ .55
AR15-Type Hammer w. J pin (8448612-SK) ............... $14.95
M16 Hammer w. J pin* (8448612-K) ....................... $14.95
Hammer Pin (8448609), Trigger Pin (8448609),
or Sear Pin* (8448599) each .................................... $1.00
Hammer Spring (8448611) ....................................... $1.00
Magazine Catch Assembly (A MC ASS) ......................... $4.95
Magazine Catch (8448638) ....................................... $3.50
Magazine Catch Button (8448636)............................. $1.50
Magazine Catch Spring (8448637) .............................. $ .55
Pistol Grip A2 (9349127) ........................................ $12.95
Pistol Grip Screw (AN501D416-18) .............................. $ .65
Pistol Grip Screw Washer (MS35335-61) ...................... $ .45
Pivot Pin — Front (8448621) ................................... $4.20
Bolt Carrier
8448507
Pivot Pin Detent (8448585) ........................................ $ .55
Pivot Pin Spring (8448586) ........................................ $ .55
AR15-Type Safety Selector (9381367-S) .................... $10.95
M16 Safety Selector* (9381367) ............................ $10.95
Safety Detent (8448631) .......................................... $1.00
Safety Detent Spring (8448516) ................................. $ .85
Take Down Pin — Rear (8448584) ........................... $4.20
Take Down Pin Detent (8448585) ............................... $ .55
Take Down Pin Spring (8448586) ................................ $ .55
Trigger for M16* (8448592) ................................... $11.95
Trigger for AR15-Type (8448592-S) ........................... $11.95
Trigger w. Spring for AR15-Type (9349115-S) ............. $12.95
Trigger Spring (8448593) .......................................... $1.00
Trigger Guard (8448587)........................................... $5.50
Trigger Guard Roll Pin (MS16562-35) ........................... $ .55
a statemeNt from bushmaster regardiNg machiNe guN parts
The position of the Bureau of Alcohol, Tobacco and Firearms (ATF) is that if your AR15-Type rifle contains even one M16 component, it is a
machine gun. If you own an AR15-Type from any manufacturer, check to make sure there are no M16 components in its assemblies. If there
are, remove them immediately. Machine them to AR configuration, or replace them and destroy the M16 components. Refer to the illustrations
below to determine if you have M16 components in your assemblies. If you have any questions about your parts, give us a call and we’ll be
glad to supply you with the legally acceptable parts.
Sales of M16 components by Bushmaster Firearms International, LLC will only be made to the following categories of customers: (1) Class 3 (NFA)
Dealer, (2) Individual who has a registered NFA weapon, (3) Federal Firearms Licensee with a customer who has a registered NFA weapon.
26
Phone orders: 1.800.998.7928
upper receiver/
barrel assemblies
precision-crafted, modular
design. bushmaster upper
receiver/barrel assemblies.
• Infinite configuration possibilities – the versatile Bushmaster
modular AR platform
• Barreled upper receivers can be used on existing AR rifle or
carbine lower units
• All receivers feature integral brass deflectors and hard anodized
finish
• Each assembly is factory headspaced, test-fired and ready to use
• Bushmaster 4150 chrome moly-vanadium steel barrels
feature hard chrome lining in both bore and chamber for
extended barrel life
• Optional stainless steel barrels offer exceptional durability and
weather resistance
• Threaded muzzles
.450 caliber upper assembly
• Add the hard-hitting punch of the 450 Bushmaster to your
Bushmaster lower receiver instantly
• AR-type gas operating system drastically reduces recoil for
excellent second shot control
• Aluminum forearm free-floats the barrel for optimum accuracy
• Heavy barrel is hard-chrome lined in bore and chamber for
exceptional durability and features 1 in 24" twist rifling,
optimized for the .450 bullet
• Includes 5-round .450 specific magazine
Bushmaster .450 – 20" Bbl Rifle Upper Assembly
(BURVMB 20-45)............................................... $795.00
Bushmaster .450 – 16" Bbl Carbine Upper Assembly
(BURVMB 16-45)............................................... $785.00
6.8mm spc caliber
upper assembly
• 6.8mm SPC (Special Purpose Cartridge) was specifically developed for military applications and is now available commercially
• Velocity averages 2600 FPS with 115-gr. bullets
• The 6.8mm SPC was specially adapted to fit the AR15-Type
magazine
• 16" M4-profile barrel is fitted with Izzy muzzle brake
• 26-round magazine included
Bushmaster 6.8mm SPC – 16" Bbl A3 Rifle Upper Assembly
(BURA3B 16M468) ........................................... $785.00
Bushmaster 6.8mm SPC – 16" Bbl A2 Rifle Upper Assembly
(BURA2B 16M468) ........................................... $685.00
7.62x39mm caliber
upper assembly
• Same features as the 6.8mm SPC (below left)
Bushmaster 7.62x39mm –
16" Bbl A3 Rifle Upper Assembly
(BURA3B 16M439) ........................................... $785.00
Bushmaster 7.62x39mm –
16" Bbl A2 Rifle Upper Assembly
(BURA2B 16M439) ........................................... $685.00
5.56mm/.223 caliber gas
piston upper assembly
• Bushmaster Gas Piston system offers improved reliability and
control to the already dependable AR-type rifle platform
• Eliminates carbon buildup, gas leaks and heat within the upper
receiver
• Requires less gas pressure to operate – functions with a wider range
of ammunition with reduced recoil
• Includes A3 handle on flat-top upper, or solid handle on A2
version
• B.M.A.S. flip-up front sight and birdcage suppressor
on both
Bushmaster 5.56mm/.223 Caliber A3 Gas Piston Upper
Assembly
(BURA3B 16M4-GP) ........................................ $1,130.00
Bushmaster 5.56mm/.223 Caliber A2 Gas Piston Upper
Assembly
(BURA2B 16M4-GP) ........................................ $1,030.00
varminter/predator .223 cal.
upper assembly
• Vented free-floating fore-end and scope risers on a flat-top upper
• 11˚ competition muzzle crown and milled gas block
• Fluted, extra heavy, non-chrome-lined 20" barrel with 1 in 8"
twist
Bushmaster Predator Upper Assembly
(PURVMB 20FPRED8) ......................................... $775.00
• Fluted, extra heavy, non-chrome-lined 24" barrel with 1 in 9"
twist
Bushmaster Varminter Upper Assembly
(PURVMB 24FVAR9)........................................... $785.00
www.bushmaster.com
27
upper receiver/
barrel assemblies
stainless varmint special .223
cal. upper assembly
• Vented free-floating fore-end and scope risers on a flat-top upper
with milled gas block
• Stainless steel, heavy, non-chrome-lined 24" barrel
with 1 in 9" twist
Stainless Steel Varmint Special
(PURVMB 24-9SS) ............................................. $785.00
• Stainless steel, heavy, non-chrome-lined 24" barrel
with 1 in 9" twist
Varmint Special Upper without Bolt, Carrier Assembly and
Charging Handle
(PURVM 24-9SS) ............................................... $635.00
modular carbine
upper assembly
• Fluted, chrome-lined, chrome moly steel 16” barrel with 1 in
9” twist
• Milled gas block, flip-up sights, 4-rail fore-end with rail covers
• Bipod/sling stud, flat-top upper receiver with bolt carrier, charging handle and forward assist
Complete Upper Receiver
(BURVMB 16FMC) ............................................. $990.00
Without Bayonet Lug or Suppressor
(PURVMB 16FMC) ............................................. $990.00
bushmaster 14.5" m4-type
upper assembly w/ izzy
suppressor
M4A3 .223 Caliber Upper Assembly
(BURA3B 14.5M4 IZ) ......................................... $725.00
Same Assembly Less Bolt, Carrier and Charging Handle
(BURA3 14.5M4 IZ) ........................................... $575.00
M4A2 .223 Caliber Upper Assembly
(BURA2B 14.5M4 IZ) ......................................... $625.00
(BURA2 14.5M4 IZ) ........................................... $475.00
State-compliant uppers also available.
28
Phone orders: 1.800.998.7928
16" heavy carbine upper assembly
• 16” barrel carbines offer compact size, balanced swing weight, and
great accuracy called for in many tactical situations
• Standard issue for many law enforcement and military units
• Available in both A3 and A2 versions, with or without bolt,
carrier, and charging handle
16” Heavy A3 Carbine Upper Assembly
(BURA3B 16) .................................................... $685.00
Same Heavy A3 Assembly Less Bolt, Carrier and Charging Handle
(BURA3 16) ..................................................... $535.00
16” Heavy A2 Carbine Upper Assembly
(BURA2B 16) .................................................... $585.00
Same Heavy A2 Assembly Less Bolt, Carrier and Charging Handle
(BURA2 16) ...................................................... $435.00
16” m4 patrolman’s carbine
upper assembly
• Similar to our M4-type carbines, but with additional barrel length
(16”) to make them legal for sale to individual officers
• Forged, lightweight 7075T6 aircraft-quality aluminum receivers
incorporate all M16A2 design improvements including cartridge
case deflector, bolt catch assembly and raised ribs for protection
against accidental magazine release
• Available in both A3 and A2 versions, with or without bolt,
carrier, and charging handle
16” A3 Patrolman’s Carbine Upper Assembly
(BURA3B 16M4) ............................................... $695.00
Same A3 Assembly Less Bolt, Carrier and Charging Handle
(BURA3 16M4) ................................................ $545.00
16” A2 Patrolman’s Carbine Upper Assembly
(BURA2B 16M4) ............................................... $595.00
(BURA2 16M4) ................................................. $445.00
bushmaster 16” dissipator
carbine upper assembly
• Gas block located behind the front sight base and under the
full-length handguards to guard against heat buildup
A3 Dissipator Carbine Upper Assembly
(BURA3B 16D) .................................................. $705.00
(BURA3 16D) .................................................... $555.00
A2 Dissipator Carbine Upper Assembly
(BURA2B 16D) .................................................. $605.00
(BURA2 16D) .................................................... $455.00
bushmaster 16” superlight
upper assembly
Superlight A3 Carbine Upper Assembly
(BURA3B 16SL) ................................................. $695.00
(BURA3 16SL) ................................................... $545.00
Superlight A2 Carbine Upper Assembly
(BURA2B 16SL) ................................................. $595.00
(BURA2 16SL) ................................................... $445.00
bushmaster “v match”
16”/20”/24” upper assembly
bushmaster 11.5” barrel
upper assembly with 5.5”
Flash suppressor
A3 Carbine Assembly with 5.5” Flash Suppressor
(BURA3B 11.5/5.5) .......................................... $695.00
(BURA3 11.5/5.5) ............................................ $545.00
A2 Carbine Assembly with 5.5” Suppressor
(BURA2B 11.5/5.5) .......................................... $595.00
(BURA2 11.5/5.5) ............................................ $445.00
16” V Match Carbine Upper Assembly
(BURVMB 16) ................................................... $625.00
(BURVM 16) ..................................................... $475.00
20” V Match Rifle Upper Assembly
(BURVMB 20AH)................................................ $625.00
(BURVM 20AH) ................................................. $475.00
24” V Match Rifle Upper Assembly
(BURVMB 24AH)................................................ $635.00
(BURVM 24AH) ................................................. $485.00
upper receiver/barrel assemblies
For NFa class 3 & pistols
bushmaster 20”/24” NatioNal
match target upper assembly
bushmaster 11.5” barrel
upper assembly
20” A3 w/A3 Carry Handle
(BURA3B 20) .................................................... $685.00
(BURA3 20) ...................................................... $535.00
20” A2 Solid Carry Handle
(BURA2B 20) .................................................... $585.00
(BURA2 20) ...................................................... $435.00
24” A3 w/A3 Carry Handle
(BURA3B 24) .................................................... $695.00
(BURA3 24) ...................................................... $545.00
24” A2 Solid Carry Handle
(BURA2B 24) .................................................... $595.00
(BURA2 24) ...................................................... $445.00
20” A3 Stainless w/A3 Handle
(BURA3B 20SS) ................................................ $735.00
Same Assembly Less Bolt, Carrier adn Charging Handle
(BURA3 20SS .................................................... $585.00
20” A2 Stainless Solid Carry Handle
(BURA2B 20SS .................................................. $635.00
(BURA2 20SS .................................................... $535.00
State-compliant uppers also available.
Due to BATF regulations restricting barrel length, the upper
receiver/barrel assemblies below are legal for installation
only on weapons registered as short barreled rifles, full autos
or pistols, and cannot be sold to the general public without
proper paperwork and permitting. For any questions regarding
these uppers, please consult our sales professionals.
A3 Carbine Upper Assembly
(BURA3B 11.5) ................................................. $685.00
(BURA3 11.5) ................................................... $535.00
A2 Carbine Upper Assembly
(BURA2B 11.5) ................................................. $585.00
(BURA2 11.5) ................................................... $435.00
bushmaster 14.5” m4 barrel
upper assembly
M4A3 Carbine Upper Assembly
(BURA3B 14.5M4) ............................................ $695.00
Same M4A3 Assembly Less Bolt, Carrier and
Charging Handle
(BURA3 14.5M4) .............................................. $545.00
M4A2 Carbine Upper Assembly
(BURA2B 14.5M4) ............................................ $595.00
Same M4A2 Assembly Less Bolt, Carrier and
Charging Handle
(BURA2 14.5M4) .............................................. $445.00
14.5” heavy barrel uppers also available.
www.bushmaster.com
29
Upper receiver parts
BUshmaster complete Bolt &
Bolt carrier assemBly
AR15-Type
(8448501-S)..................................................... $137.95
M16
.(8448501)....................................................... $137.95
*NOTE:.M16.parts.are.NOT.legal.for.sale.in.California.
ar15-type or m16 Bolt carrier
assemBly with Key staKed on
•.Chrome-lined.for.smooth.bolt.functioning.and.long.life
AR15-Type
(8448505-S)....................................................... $92.50
M16*
(8448505).......................................................... $92.50
Bolt cam pin
•..Machined.of.hardened.steel.to..
military.specs..or.better
•..Manganese.phosphated.for..
protection.against.rust.or.corrosion
Bolt.Cam.Pin
(8448502)............................................................ $4.50
chrome steel Firing pin
•.A.standard,.mil..spec..firing.pin.for.the.AR15-Type.or.M16
AR15-Type
(8448503-S)......................................................... $7.50
M16
.(8448503)........................................................... $7.50
NOTE:..M16.bolt.carriers.must.be.used.in.Title.II.receivers.for.legality...
An.FFL.or.Tax.Stamp.is.required.for.purchase..
*M16.parts.are.NOT.legal.for.sale.in.California.
complete ar15-type
Bolt assemBly
•..Includes.bolt,.extractor.assembly,.pins,.gas.rings,.ejector.
assembly
titaniUm
Um Firing pin
•..Titanium.is.40%.lighter.than.steel.for.faster.lock.time.and.
greater.accuracy
•..Patented,.precision.machined.pin.improves.safety.by.reducing.
the.possibility.of.a.“slam.fire”
AR15-Type
(13-7015)........................................................... $42.50
Complete.AR15-Type.Bolt.Assembly
(8448509).......................................................... $56.00
ar15-type or m16 Bolt carrier withoUt Key
•..Same.quality.chrome-lined.carrier,.but.without.the.carrier.key
AR15-Type
(8448507-S)....................................................... $78.95
M16*
(8448507).......................................................... $78.95
CAUTION:..Bolt.carrier.keys.must.be.“staked”.onto.the.carrier.for.safe.and.proper.functioning.in.your.rifle..For.information.on.this.procedure,.or.
any.AR15-Type.assembly/disassembly.work,.we.recommend.the.Bushmaster.video.or.the.U.S..government.M16.technical.manual.
(see.Gunsmithing.Section).
*M16.parts.are.NOT.legal.for.sale.in.California.
30
Phone orders: 1.800.998.7928
Bolt Carrier reBuild Kit
• Includes all parts shown to rebuild your bolt and carrier
AR15-Type
(A BC REBUILD) ................................................... $37.95
M16*
M BC REBUILD) .................................................... $37.95
*NOTE: M16 parts are NOT legal for sale in California. WARNING: Key must be staked onto carrier.
tion Port Cover assemBly
ejeCtion
• Manganese phosphate finished in matte gray/black color to match hard anodized uppers
Ejection Port Cover Assembly
(A EJ COV ASS) .................................................... $12.95
Forward assist
assemBlies —
teardroP or
round style
• Machined from 4140 ordinance steel • Manganese phosphate finished Teardrop Style
(9349086-TD KIT) ............................................... $21.50
Round Style
(9349086 KIT) ................................................... $21.50
Charging handle assemBly
• Precision machined from 7075T6 aircraft-quality aluminum forgings, they are hard anodize finished per U.S. mil. spec. — with spring-loaded latch installed
Charging Handle Assembly
(8448517) ......................................................... $26.50
AR15-Type/M16 (Charging Handle with Tactical Latch)
(8448517-TL) ..................................................... $42.95
ar15-tyPe/m16
e/m16 Charging handle
taCtiCal latCh
• Sturdy steel construction – improves on the standard charging handle latch and allows easy weapon charging, or left- handed operation when using a scope or other optics
AR15-Type/M16 (Latch Only)
(1005-249-02) ................................................... $21.95
enidine hydrauliC
BuFFer –
rate reduCer
• Drop-in replacement for standard buffers, with units designed for either rifles or carbines
designed for either rifles carbines
• Quality alloy steels with a black oxide finish; action rod is nickel plated for smooth operation
• Rear “bumper” is molded black polyurethane
For Carbines
(HB-1A) .............................................................. $89.95
For Rifles
(HB-2A) .............................................................. $99.95
individual Parts
For uPPer reCeivers
Bolt Cam Pin
(8448502) ........................................................... $4.50
Bolt Carrier Key with screws/must be staked
(AR BC KEY/SCREW) ............................................ $15.95
Bolt Gas Rings (set of 3)
(8448511K) ......................................................... $3.15
Ejector Assembly
(A EJECT ASS) ........................................................ $3.50
Extractor Assembly
(A EXTRAC ASS) ................................................... $14.95
Extractor
(8448512) ......................................................... $13.95
Extractor Pin
(8448513) ........................................................... $1.00
Extractor Spring
(8448755SP) ....................................................... $1.50
Extractor Spring Insert
(8448754) ............................................................ $ .80
Firing Pin
(8448503-S) ........................................................ $7.50
Firing Pin Retaining Pin
(8448504) ........................................................... $1.00
www.bushmaster.com
31
Barrels
Bushmaster Barrels are the finest AR15-Type/M16-Type barrels made – machined from 4150
chrome moly-vanadium steel. We also offer 20"/24" heavy profile barrels machined from stainless steel. Most
Bushmaster barrels are hard chrome-lined (except the Stainless Steel, Varminter, Predator, DCM and 9mm) to offer
corrosion resistance in the bore and chamber. The chrome lining is much harder than barrel steel and effectively
doubles barrel life with proper care (exactly why the military specifies the process). Chrome’s lubricity (i.e.,
“slipperiness”) reduces friction, increases velocity, aids in chambering and extraction, and speeds barrel cleaning.
Bushmaster barrels are manganese phosphate finished (except the Stainless) to guard against exterior rust or
corrosion, and to provide the same matte black, non-reflective finish found on quality military-type arms.
Rifling. Bushmaster barrels have 6 grooves and lands, right hand
twist, 1 turn in 9” (except for DCM & Predator barrels – 1 in 8”).
The 1 in 9” twist offers optimal results for the widest variety of
commercially available .223/5.56mm ammunition.
Forged Front Sights. Our standard front sights are machined from
steel forgings to offer superior tensile strength. We do not use castings, which may crack or break if you accidentally drop your rifle.
Headspacing. Barrel assemblies are headspaced at the factory and
are shipped ready for assembly and use. Barrel assemblies can
be ordered with either a stepped, crowned muzzle or a threaded
muzzle for attachment of a flash suppressor or muzzle brake. BATF
rulings permit permanent factory installation of muzzle brakes/
suppressors on barrels if the overall length (barrel & brake, etc.)
equals at least 16”. Ask your Bushmaster representative about
factory-installed muzzle brake/compensator/flash suppressor
options available, or see muzzle brakes/suppressors in this catalog.
Purchase Two Ways. In the listings below, Bushmaster barrels can
be purchased as “Complete Assemblies,” which include all parts
forward of the upper receiver: handguards; gas tube; delta ring kit;
etc. as shown here:
Bushmaster barrels can also be purchased as “Barrel Only,” which
includes the barrel, barrel nut, handguard cap and complete front
sight assembly (with sight post and sling swivel) as a savings
to those shooters who already have handguards. An example of
”Barrel Only” configuration is shown here:
Note: “Barrel Only” assemblies of 16” or longer length will not
include flash suppressors; order those separately from our Muzzle
Brakes/Suppressors/Compensators Section.
32
Phone orders: 1.800.998.7928
Barrel Fluting Option. Fluting is the process of milling 6 grooves
into the barrel’s surface to increase cooling capability by increasing
the barrel’s surface area. Depending upon barrel length, fluting
increases surface area by as much as 180% and can reduce barrel
weight by as much as 20%. Because of the extensive machining
involved, order fulfillment on fluted barrels can take longer. Ask
your sales representative about availability when ordering fluted
barrels. To order a barrel with fluting, simply add $50.00 to the
price of the barrel (or assembly), and add an “F” to the end of the
part number. Note: Fluting is not available on some barrels, such
as the A2 Gov’t. Profile, the M4-Type barrel and some Stainless
Steel barrels. Fluting is included on Varminter and Predator barrels
(Predator shown below).
Pre-ban/Post-ban. A caution for our customers: when the Assault
Weapons Ban of 1994 expired on Sept. 13th, 2004, it became
legal to again offer features on the AR15-Type rifle such as flash
suppressors and bayonet lugs that had been deemed illegal for
those previous 10 years. Though that federal legislation has
expired, certain states have retained their own versions of assault
weapons ban statutes. Buyers should check their own state and
county laws to determine the local legality of rifles or parts such as
barrels with these features and accessories.
Barrel asseMBlies
223 reM/5.56MM CaliBer
stainless steel replaCeMent
Barrels for CarBon 15 rifles
& pistols
• Match Grade 416 Stainless Steel factory replacement barrels
—.223/5.56mm cal. — precision machined, polished and 1
X 9” twist rifled, these barrels require factory installation (special
torqueing with a unique barrel wrench — no charge)
Carbon 15 R21 & Bushmaster Lady Rifle Barrel
14.5" M4 Barrel only with
izzy CoMpensator
With Bayonet Lug
(A BBL-14M4 IZFH) ............................................ $240.00
Without Bayonet Lug
(P BBL-14M4IZ) ................................................. $240.00
(AZ15367) ....................................................... $159.95
Carbon 15 R97 Rifle Barrel
(AZ15368) ....................................................... $209.95
R97S & R97F Barrel
(AZ15368T) ...................................................... $209.95
P21 Pistol Barrel
(AZ15313) ....................................................... $139.95
P21S Pistol Barrel
(AZ15313T) ...................................................... $139.95
P97 Pistol Barrel
(AZ15314) ....................................................... $179.95
P97S Pistol Barrel
(AZ15314T) ...................................................... $179.95
BushMaster “short
Barrelled” asseMBlies
• These chrome-lined barrel assemblies (either 11.5” or 14.5”)
with A2 birdcage suppressors may only be used on registered
short barrelled rifles or full auto models for legality. Can be
installed on pistols as well.
14.5” M4-type Barrel asseMBly
• Chrome-lined, 1 x 9” twist barrel with birdcage
suppressor – machined for the addition of the M203 grenade
launcher with the narrow “government” profile under the
handguards for light weight like the original A1 rifle barrel
14.5” M4-Type Barrel Assembly
(A BBL-14M4A) ................................................. $235.00
14.5” M4-type Barrel only
• Less handguards, gas tube, delta ring kit and
birdcage flash suppressor
14.5” M4 Barrel Only
(A BBL-14M4) ................................................... $205.00
16” M4 “patrolMan’s
CarBine” Barrel asseMBly
• 16” M4 profile chrome-lined barrel with A2 birdcage suppressor on
threaded muzzle – one of our most popular configurations
11.5” Barrel Assembly
(A BBL-11.5A) ................................................... $225.00
11.5” Barrel Only
(A BBL-11.5) ..................................................... $195.00
14.5” Heavy Barrel Assembly
(A BBL-14.5A) ................................................... $225.00
14.5” Heavy Barrel Only
(A BBL-14.5) ..................................................... $195.00
With Bayonet Lug
(A BBL-16M4A) ................................................. $235.00
Without Bayonet Lug or Threaded Muzzle
(P BBL-16M4A).................................................. $235.00
NOTE: With a permanently installed Izzy compensator, or other 2
3/16” suppressor, the 14.5” heavy barrel assembly becomes
a legal 16” barrel. Ask your Bushmaster salesperson for details.
With Bayonet Lug
(A BBL-16M4) ................................................... $205.00
(P BBL-16M4) ................................................... $205.00
14.5" M4 Barrel asseMBly with
izzy CoMpensator
• M4 profile chrome-lined barrel with pinned and welded Izzy
compensator — is BATF legal for semi-auto rifles. Total length
is just over 16".
With Bayonet Lug
(A BBL-14M4 IZFHA) .......................................... $270.00
Without Bayonet Lug
(P BBL-14M4IZA) ............................................... $270.00
16” M4 “patrolMan’s
CarBine” Barrel only
• Less handguards, gas tube, delta ring kit and suppressor
16” heavy CarBine Barrel asseMBly
• Heavy profile 16” chrome-lined barrel with A2
birdcage suppressor on threaded muzzle — many
other suppressors & brake will screw on
With Bayonet Lug
(A BBL-16A) ...................................................... $225.00
(P BBL-16A........................................................ $225.00
www.bushmaster.com
33
Barrel assemBlies
223 rem/5.56mm CaliBer
16” Heavy CarBine Barrel only
16” Dissipator m4 Barrel only
With Bayonet Lug
(A BBL-16) ........................................................ $195.00
(P BBL-16) ........................................................ $195.00
With Bayonet Lug
(A BBL-16DM4) ................................................. $225.00
(P BBL-16DM4) ................................................. $225.00
16” superligHt Barrel assemBly
• The lightest 16” chrome-lined barrel we offer — with A2
birdcage suppressor on threaded muzzle. Tapers from .670”
to .565” under handguards, .625” under sight base, and to
.570” at the muzzle (similar to the original Vietnam era A1
barrel profile).
With Bayonet Lug
(A BBL-16SLA) ................................................... $235.00
(P BBL-16SLA) ................................................... $235.00
Note: Due to diameter at muzzle, no “slip-on/pinned” type muzzle brakes
will fit this barrel. Use only 1/2”x 28 t.p.I. threaded accessories.
16” superligHt Barrel only
With Bayonet Lug
(A BBL-16SL)..................................................... $205.00
(P BBL-16SL)..................................................... $205.00
16" Dissipator Heavy
Barrel assemBly
• A 16" chrome-lined barrel with carbine position gas block, and full
length, heat-shielded handguards for excellent cooling and the full
sight radius designed into the A2 sight system
With Bayonet Lug
(A BBL-16DA) .................................................... $245.00
(P BBL-16DA) .................................................... $245.00
16" Dissipator Heavy Barrel only
With Bayonet Lug
(A BBL-16D) ...................................................... $215.00
(P BBL-16D) ...................................................... $215.00
16” Dissipator m4
Barrel assemBly
• As described above but with M4 profile for lighter weight.
Carbine position gas block, heat shielded rifle handguards, full
sight radius designed of the A2 sight system
With Bayonet Lug
(A BBL-16DM4A) ............................................... $255.00
(P BBL-16DM4A)................................................ $255.00
34
Phone orders: 1.800.998.7928
20” m16 a2-type
Barrel assemBly
• A gov’t. profile chrome-lined barrel — light in weight and
reduced in diameter under the handguards —ideal for restoring that
older rifle or building a new lightweight
With Bayonet Lug & A2 Birdcage Suppressor
(A BBL-20A2A) .................................................. $235.00
With Plain Muzzle & no Bayonet Lug
(P BBL-20A2A) .................................................. $235.00
20” m16 a2-type Barrel only
With Bayonet Lug
(A BBL-20A2) .................................................... $205.00
(P BBL-20A2) .................................................... $205.00
20” target Heavy
Barrel assemBly
• A 20” heavy profile barrel chrome-lined in both bore and chamber
— with A2 birdcage flash suppressor and all parts forward of the
upper receiver
With Bayonet Lug
(A BBL-20A) ...................................................... $225.00
(P BBL-20A) ...................................................... $225.00
20” target Heavy Barrel only
With Bayonet Lug
(A BBL-20) ........................................................ $195.00
(P BBL-20) ........................................................ $195.00
20” stainless steel
Heavy Barrel assemBly
• Per request of many high power competition shooters, the
accurate 1 in 9” twist Bushmaster barrel is available in brush
finished, non-chrome-lined, 416 Stainless Steel
With Bayonet Lug and Birdcage
(A BBL-20SSA) .................................................. $275.00
Plain Muzzle & no Bayonet Lug
(P BBL-20SSA) .................................................. $275.00
20” StainleSS Steel Heavy
Barrel Only
With Bayonet Lug
(A BBL-20SS) .................................................... $245.00
(P BBL-20SS) .................................................... $245.00
20” PredatOr Barrel aSSemBly
• Similar to Varminter but 20” Fluted length and rifled 1 x 8” for
the heavier bullets used on Predators – non-chrome-lined, with
an 11° competition muzzle crown
• V Match sight base/gas block and vented fore-end with sling
stud — assembly by gunsmith recommended
20” Predator Barrel Assembly
(P BBL-20FPRED8A) ........................................... $381.95
20” PredatOr Barrel Only
• Same as above: barrel, bolt and V Match milled gas block
— less vented free-float fore-end and gas tube. Shipped
unassembled; gunsmithing recommended.
20” Predator Barrel Only
(P BBL-20FPRED8) ............................................. $303.95
24” target Heavy
Barrel aSSemBly
• 24” heavy profile chrome-lined barrel
With Bayonet Lug
(A BBL-24A) ...................................................... $235.00
(P BBL-24A........................................................ $235.00
24” target Heavy Barrel Only
With Bayonet Lug
(A BBL-24) ........................................................ $205.00
(P BBL-24) ........................................................ $205.00
24” varminter
Barrel aSSemBly
• 24” fluted, non-chrome-lined barrel based on DCM competition
design — button rifled 1 x 9”. Features a hybrid SAAMI
spec. chamber with longer throat or “leade” to accommodate
5.56mm ammunition.
• It is 1” in diam. out to the gas block with an 11° competition
muzzle crown; V Match sight base/gas block and Varminter
vented fore-end with bipod/sling stud, and includes a bolt
• We recommend assembly onto your upper receiver
by an experienced AR15-Type gunsmith to achieve full
accuracy — shipped unassembled (as shown)
24” Varminter Barrel Assembly
(P BBL-24FVAR9A) ............................................. $391.95
24” varminter Barrel Only
• Same as above: barrel, bolt and V Match milled gas block
— less Varminter vented fore-end and gas tube. Shipped
unassembled; gunsmithing recommended.
24” Varminter Barrel Only
(P BBL-24FVAR9) ............................................... $313.95
24” StainleSS varminter
Barrel aSSemBly
• A highly accurate 24” barrel as used in our stainless Varminter
special rifle — brush-finished 416 stainless steel in 1 in 9” twist
complete with vented aluminum free-floater fore-end, sling stud,
gas block, gas tube, bolt and barrel extension
• Shipped unassembled; requires gunsmithing
24” Stainless Varminter Barrel Assembly
(P BBL-24A-SS) .................................................. $391.95
24” StainleSS varminter
Barrel Only
• Includes 24” 1 X 9” twist stainless steel barrel with gas block,
bolt and barrel extension
24” Stainless Varminter Barrel Only
(P BBL-24SS) .................................................... $313.95
www.bushmaster.com
35
barrel parts/compensators/
suppressors/muzzle brakes
A
B
C
“car 15” Flash suppressors
• High quality, manufactured in the U.S.A. — the six-slot design
makes these suppressors very effective on the short barrelled
carbine
• For threaded muzzles only (threaded 1/2" x 28 t.p.I.)
A. Shorty Look Slip-over Flash Suppressor
(Std Barrels .610@Muzzle)
(MMT-0019) ....................................................... $15.95
A. Shorty Look Slip-over Flash Suppressor
(Hvy Barrels .720@Muzzle)
(9349SFSH) ....................................................... $20.95
Internal threads allow a “slip-over” installation onto the barrel, giving your
gun a “shorty” look without sacrificing accuracy – 5” overall length
B. CAR 15 Extended Flash Suppressor
(MMT-500) ......................................................... $15.95
5.5” overall length — threaded for all pre-ban barrels
C. CAR 15 “Original” Flash Suppressor
(1005-914-3902) ............................................... $15.95
This is the original 4.5" M177 carbine design
Gas tubes
• Quality materials and machining, properly bent for a perfect fit
and flawless functioning in your rifle
Rifle-length Gas Tube
(8448567)......................................................... $14.95
Carbine-length Gas Tube
(1005-914-3504) ............................................... $12.95
Gas Tube Roll Pin
(MS16562-106) ..................................................... $.50
A
B
C
handGuard caps
• Manganese phosphate finished steel handguard caps in three
different types for standard or heavy profile barrels
• NOTE: Rifle-length handguards take the triangular cap; Standard
carbine handguards take the round cap; M4 (oval profile)
carbine handguards take either round cap (B or C)
A. Triangular Cap (Standard Barrel)
(SGW-10) ............................................................. $6.50
A. Triangular Cap (Heavy Barrel)
(9349053)........................................................... $6.50
36
Phone orders: 1.800.998.7928
B. Round Cap (Standard Barrel)
(SGW-09) ............................................................. $6.50
B. Round Cap (Heavy Barrel)
(SGW-10F)............................................................ $6.50
C. M4 Cap (Notched for M203)
(SGW-10F-M) ........................................................ $6.50
NOTE: Diameter of standard barrel = .625”
Diameter of heavy barrel = .750”
A
B
D
C
IndIvIdual delta rInG parts
A. Aluminum Delta Ring
(8448712)........................................................... $7.50
B. Handguard Weld Spring
(8448555)........................................................... $5.25
C. Handguard Snap Ring
(MS16626-1137) ................................................. $2.75
D. Gas Tube Roll Pin
(MS16562-106) ..................................................... $.50
Delta Ring Kit (includes all parts below)
(8448712K) ....................................................... $13.95
A
C
D
B
IndIvIdual barrel parts
A. Front Sling Swivel
(8448571)........................................................... $3.50
B. Front Sling Swivel Rivet
(8448697)............................................................. $.80
C. Barrel Extension
(9349054BE) ..................................................... $15.95
D. Barrel Nut
(9349054BN)..................................................... $12.95
A
B
Bushmaster Izzy Flash
suppressor/Compensator
• One of a series designed by a Bushmaster employee
• Features 3 gas ports, a machine turned ribbed design, and a
closed bottom
• Functions as a flash suppressor, but also effectively controls
muzzle rise in rapid fire
• Machined from quality gun steel – manganese
phosphate finished
A. Bushmaster Izzy Flash Suppressor/Compensator
(IZ-102660-FH) ................................................... $36.95
• For plain muzzle 5.56mm/.223 cal. post-ban guns. Similar to
above but slips over .700” diam. muzzles and is pinned on with a
taper pin and high strength Loctite® for extra safety.
B. Bushmaster Izzy Flash Suppressor/Compensator
(IZ-102660-SFH) ................................................ $36.95
Warning: Requires factory installation or professional gunsmithing
to drill and install the taper pin
NOTE: Bushmaster does NOT sell front sight bases separately due
to the difficulties of drilling and retro-fitting them to barrels.
a2 “Crush” Washer
(12991533B) ............................ $2.95
• Used at Bushmaster factory for positioning suppressor and muzzle
brake installations – for one time use only
a2 peel Washer
(9349052) ................................ $3.15
• A re-usable multi-layer washer for the correct timing of suppressor or brake installations on threaded muzzle barrels
a1 Flash hIder
loCk Washer
(8448577) ............................................................ $.60
450 Crushwasher
(12991533B-45) ................................................. $2.95
6.8/7.62/308 Crushwasher
(TD308002-3) ..................................................... $6.50
A
B
Bushmaster Izzy muzzle Brake
(5.56mm/.223 Cal.)
Production approved by the BATF – featuring four gas ports and a
ribbed design to improve cooling. Machined of 4140 gun steel with
a manganese phosphate finish – very effective in controlling muzzle
rise. Slip-on/taper pinned version for barrels with plain crowned
muzzles, and threaded model (shown left - threaded 1/2” x 28
t.p.I.) can be installed without regard to port location (timing) and
will still be effective; however, most are installed with ports positioned
12–3–6–-9 o’clock. The slip-on, pinned version requires factory
installation or professional gunsmithing to drill and install the taper
pin, and for extra safety, high strength Loctite® should be used in
addition to the taper pin.
A. Threaded Izzy Brake (for 1/2” x 28 t.p.I. threaded barrels
— requires lock washer)
(IZ-102660-PRBF)................................................ $36.95
B. Slip-on Izzy Brake (for plain muzzles .700” diameter —
requires gunsmithing)
(IZ-102660-PSTF) ............................................... $36.95
.308 Izzy Brake (for .308 Cal. threaded barrels (5/8” x 24)
— requires crush washer) (not shown)
(IZ-308-PRBFH) ................................................... $36.95
phantom Flash suppressor
Precision CNC machined from quality
gun steel – phosphate coated to
military standards – with 5 equally
spaced gas slots, it eliminates most of the
flash and offers excellent performance with night
vision equipment. Superior strength to earlier forked type, and
it won’t hang up on brush or clothing; 2 3/16” overall for threaded
muzzles only (1/2” x 28 t.p.I.). Requires no specific timing, so only a
lock washer is needed.
Phantom
(YHM-29) ........................................................... $36.95
phantom 2 Flash suppressor
• An improved version of the
Phantom – no bottom slot avoids
a dust signature when firing prone
• Superior flash hiding in all conditions
• For standard muzzles (1/2” x 28 t.p.I.),
machined from quality gun steel with a final phosphate coating
to mil. specs
Phantom
(YHM-28-5C1) ..................................................... $36.95
Note: Crush washer or peel washer is required for correct timing.
www.bushmaster.com
37
BArrel pArTs/CoMpensATors/
suppressors/Muzzle BrAKes
A2 BirdCAge FlAsh suppressor
uppressor
• Five-slot design (threaded 1/2” x 28 t.p.I.) without a bottom slot to avoid dust signature when shooting prone position • Peel washer or crush washer is required for correct installation timing
AAC BrAKes & suppressors
A2 Birdcage Flash Suppressor
(9349051) ........................................................... $6.50
Note: Even if pinned on/welded over, this suppressor is NOT long enough to make a 14.5” barrel legal for use on a semi-auto rifle.
uppressor
A1 BirdCAge FlAsh suppressor
• Original birdcage from the Vietnam all
era — has six equally spaced slots all timing.
around — needs no specific slot timing. Standard 1/2" x 28 t.p.I. threading.
• For installation use the flash hider lock washer (p. 37)
washer (p. 37)
A
B
Muzzle Brake
• Reduce recoil & stay on target. Highly-efficient muzzle brake design and compatible with AAC sound suppressors. Constructed with aerospace-grade heat-treated 17-4 stainless steel and SCARmor™ coated for high surface hardness and durability.
A. (10047) ...................................................... $150.00
B. (10048) ...................................................... $150.00
A1 Birdcage Flash Suppressor
(8448576) ........................................................... $6.50
gov’T. issue-Type BlAnK Firing
AdApTers
• Allows the AR15-Type gas system to function with blank ammo
• Made of heavy steel with a finish of bright paint for safety — fits over A2 birdcage flash suppressor on 16” & 20” barrels
• Warning! Remove these adapters BEFORE firing live ammo!
Red Firing Adapters (16” & 20” barrels) ....... (RAY-008) $15.95
Yellow Firing Adapters (11.5” & 14.5” barrels) ....(RAY-010) $15.95
russiAn design AK74-Type
Muzzle BrAKe
• A 5.56/.223 caliber copy of the very effective Russian military brake found standard on the AK74 rifle
• Screws onto threaded muzzle barrels and locks in place with an Allen head set screw (Note: a peel washer or crush washer is required for correct timing during installation); 3" overall length
• Muzzle climb is controlled by three upper gas ports — recoil is diminished by four 45° ports directing gas at an angle from the weapon, and a contoured flat at the end of the brake directs gas sideways
• Post-ban model slips over non-threaded muzzles (.700” diam.) and pins in place (taper pin included)
For Threaded Muzzles
(MMT-0012A) .................................................... $27.95
Fits standard threaded barrels — 1/2" x 28 t.p.I.
Post-ban Model for Non-Threaded Muzzles
(MMT-0012PB) ................................................... $27.95
Requires taper pin drilling/pinning. Bushmaster factory installation is recommended.
38
Phone orders: 1.800.998.7928
C
D
Flash Suppressors
• The BLACKOUT™ flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT™ is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high-strength, corrosion-resistant aerospace alloy and ultra-hard SCARmor™ finish provide the highest level of durability. Military tested and selected. C. (10043) ........................................................ $99.00
D. (10025) ........................................................ $99.00
• Eliminate flash, even on the shortest barrels, as tested by the U.S. military. Patent-pending three-prong design for exteme efficiency and with more E
strength than a four-prong. Symmetrical design for the most accuracy. Two machined flats allow simple installation with a standard size wrench. Constructed with aerospace-grade heat-treated 17-4 stainless steel and SCARmor™ coated for high surface hardness and durability. Fits 5.56 NATO (.223) caliber, 1/2 x 28 t.p.l. threaded barrels only. E. (10026) ........................................................ $59.00
magazines/
magazine accessories
Bushmaster magazines
• Offer durability, value, and guaranteed fit and function in .225/5.56mm AR15-Type rifles
• Boxes stamped with progressive die for tightest tolerances
• Seam welding process optimized for weld ingot, strength and military-standard compliance
30 Round
5 & 10 Round
20 Round
Bushmaster stainless steel
.223 magazines
30 Round Magazine
(8448670SS) ..................................................... $20.95
As shipped with most Bushmaster rifles.
20 Round Magazine
(8448670-20SS) ................................................ $20.95
Shorter, slightly curved body.
10 Round Magazine
(8448670-10SS) ................................................ $20.95
5 Round Magazine
(8448670-5SS) .................................................. $20.95
Blocked for hunting use.
Bushmaster 6.8mm
sPc magazine
• Specific to 6.8mm SPC Rifle
• 5 round and 10 round models have same shell
as 26 round but blocked to indicated capacities
• Includes anti-tilt followers
6.8mm
26 Round
(8448670-68) .................................................... $35.95
10 Round
(8448670-68-10) ............................................... $35.95
5 Round
(8448670-68-5) ................................................. $35.95
762X39 (Built to same quality
as 6.8 mag)
26 Round
(8448670-76239-26) ......................................... $35.95
10 Round
(8448670-76239-10) ......................................... $35.95
5 Round
(8448670-76239-5) ........................................... $35.95
.308 mag
20 Round
(8448670-308-20) ............................................. $44.95
5 Round
(8448670-308-5) ............................................... $44.95
Bushmaster 10
round straight-Body
magazine
• 10 round capacity steel mag
• Black finish and follower
• NRA/CMP Service Rifle match approved
10 Round Straight-Body Magazine
(30-452) ............................................................ $20.95
30 round
magazines
for Bushmaster
9mm Pistol
& carBine
• Either molded black polymer
composite or metal
• Can be disassembled for cleaning
• Metal magazine has indicator
holes and quantity markings
Black Polymer
(AZ9-00001)....................................................... $28.95
Black Steel
(AZ9-00003)....................................................... $59.95
40 round magazine
for the ar15-tyPe/m16
16
• Matte gray finished box
• Mil. spec. green follower
• Check local regulations
40 Round Magazine for the AR15-Type/M16
(MG-0007) ......................................................... $24.95
Bushmaster
450 magazine
• Heavy-duty stainless steel AR-Type
magazine box
• Single stack follower
9 Round
(8448670-45-9) ................................................ $44.95
5 Round
(8448670-45-5) ................................................. $35.95
www.bushmaster.com
39
magazines/
ba50 rifle &
carbine magazine
• Heavy steel box magazine
• Laser engraved
Bushmaster logo
• Manganese phosphate finish
with black follower and
removable floorplate
BA50 Rifle & Carbine Magazine
(BMG-17972A).................................................... $99.95
standard magazine
rebuild Kits
• Mil. spec. parts to refresh magazine
30 Rd. Mag. Rebuild Kit
(8448670-30K) .................................................... $6.50
20 Rd. Mag. Rebuild Kit
(8448670-20K) .................................................... $6.50
magazine
followers
• Plastic replacements for 5.56mm/.223
Remington magazines
30 Round
(8448672)........................................................... $1.95
bushmaster magazine springs
• Quality tempered steel springs for long memory
and positive feed
20 Round Magazine Spring
(8448671-20) ...................................................... $3.95
30 Round Magazine Spring
(8448672)........................................................... $3.95
enhanced magazine rebuild Kit
for 5.56/.223 30 rd. magazines
• Enhanced drop-in, anti-tilt follower
• Chrome silicon spring (USGI design)
Enhanced Magazine Rebuild Kit
(MAG205-Gray) .................................................. $11.95
Follower Only
(MAG111-Gray) ..................................................... $1.95
NOTE: With the 2004 “sunset” of the Federal Gun Legislation
of 1994, many features of AR15-Type rifles are again
available — BUT not in all states! Some states have their
own statutes regarding the legality of assault weapons and
the high-capacity magazines used in them. To avoid legal
problems, check your local statutes (both state and county)
before ordering high capacity magazines (greater than 10
round capacity). If in doubt, consult the Bushmaster sales
dept. (1-800-998-7928).
40
Phone orders: 1.800.998.7928
the l.u.l.a.
mag loader
(8448670-LULA) ................. $25.50
• L.U.L.A. is a “loader/unloader accessory” that will load a 30 round mag in
about 35 seconds and unload it in 5
• Fits all capacity 5.56mm/.223 AR15-Type/M16-Type magamaga
zines, including thermolds and orlites
“L.U.L.A.” Mag Loader for 9mm
(24218)............................................................. $31.95
ar15-type/m16 magazine
connector
(51-08-01) ........................................................ $25.50
Hold twice the ammo with this side-by-side
magazine clamp — fits both 20 and
30 round mags. When you empty one
magazine, drop it out, move over to the
full one, and quickly reinsert. Made of
heavy steel with flat black finish. Screw
slot is sized for use with a coin — works
with AR180 magazines as well.
Magazines not included
the original magpul (set of 3)
• Accessory for the AR15-Type/M16 for quick magazine change
• Molded black rubber Magpul with rough exterior
texture and finger loop
Magpul (Set of 3)
(MP-3) .....$10.95
Magazine not
included
Fits V Match /
Varminter /
Predator
Bag style Brass catcher
(2693828)......................................................... $42.50
Buttstock
Mag Pouches for the ar15-tyPe
• Strap an extra magazine on with these heavy duty pouches
• Models available for ambidextrous installation on either the A2
trapdoor buttstock or the CAR telescoping stock
• Black nylon webbing construction with heavy-duty Velcro flap
A2 Solid Buttstock Magazine Pouch
(TTMP) ............................................................... $31.95
Telestock Magazine Pouch
(TTTS) ................................................................ $31.95
coMPetition shell
Deflectors
• Snap onto AR15-type models to
keep hot brass under control and
away from other competitors on
the firing line
A
• Allowed under NRA High Power
Competition rules
A. A2 Fixed Carry Handle
(BD-A2) ..................... $22.95
B. A3 Flat-tops
(BD-A3-Flattop) ............ $22.95
B C. A3 Removable Handle
(BD-A3-Handle) ............ $22.95
C
• Black Cordura nylon bag with an internal frame and a zippered
opening on the underside for easy emptying of shell cases
• 2" wide Velcro strap wraps around the handguard to hold
the bag and frame in place so that it fits flat-top and other
AR15-Type rifles
Magazines not included
three Magazine Pouch
• Sewn of Cordura nylon, with a silent clasp, suspension ring and
two belt clips
Black
(6451) .................................................... $16.95
Olive Drab
(6452)..................................................... $16.95
A2-Type —others
similar
rigiD Brass catchers for ar15tyPe rifles
• Hard plastic brass catchers hold a minimum of 60 casings
• Molded of black, nylon reinforced plastic
AR15/M16 A2 Fixed Handle Rifles
(EL-AR-001)......................................................... $37.95
AR15/M16 “Flat-top” Rifles w/o A3 Type Carry Handle
(EL-AR-002) ........................................................ $37.95
AR15/M16 A3 Removable Carry Handle
(EL-AR-003)......................................................... $37.95
www.bushmaster.com
41
magazines/
mag-Brush
•..Keeps.your.magazine.well.and.mags.clean.–.helps.keep.your.
firing.chamber.clean
AR15,.Mini.14.&.9mm.UZI
(MAG206)............................................................. $6.50
.22;.10.mm;..38.Super
(MAG204)............................................................. $6.50
Magazine..
not.included
ar15-type/m16 magazine
Dust covers
(ATI15223)............................................................ $7.50...
spec-ops mamBa comBat sling
for telestockeD m4 & other
carBines
(100240101)...................................................... $39.95
•.First.sling.designed.for.full.contact.engagement
•.Left-.or.right-handed.shooters
•..Offers.fast.and.easy.transitions.with.a.“tensioned.triangle”.
design.to.eliminate.interference.with.body-mounted.load.
bearing.equipment
•..Its.tubular.web.construction.is.super.strong,.and.twist-.and.
tangle-free
•..Compatible.with.SOPMOD.components,.the.Mamba’s.static-side.
“traverse”.strap.prevents.sling.from.tangling.in.weapon’s.
mounted.sighting.or.lighting.systems.
•..Does.not.use.any.metal.snap.clips,.velcro.or.other.noise-making.
hardware
•..Flexible,.molded.black.rubber.caps.snap.over.the.magazine.top.
to.keep.out.dust.and.water
•..Sold.in.sets.of.four.—.designed.to.fit.standard.AR15/M16.
metal.magazines
mamBa comBat sling for fixeD
stock rifles
(100240201)...................................................... $39.95
universal magazine tool
(UMT)................................................................... $6.50...
•..Pocket-sized.tool.that.will.load.or.unload.any.magazine.on.the.
market.today
•..Molded.of.heavy.black.plastic.—.includes.a.convenient.brass.
key.chain
•..Designed.with.a.custom.positioning.“Speed-Lok”.feature
•..Spec..ops.Mamba.slings.allow.the.wearer.to.balance.and.position.the.weapon.according.to.situational.requirements
•..Unique.stretch.section.built.into.the.sling.allows.the.user.to.strike.an.
opponent.with.the.weapon’s.muzzle.(”barrel.thump”).while.still.
keeping.the.weapon.slung.and.in.ready.position
•..Adjusting.buckles.allow.“pre-setting”.the.sling.for.operator’s.
body.size
Also.available:.
The.Spec-Ops.Universal.Mamba.Sling
(100240501)...................................................... $49.95
stripper clip
(EGSS-01)........................................................ $.35.(ea.)
$.30.(ea..in.quantities.of.25.or.more)
stripper clip guiDes
(EGSS-02)......................... $1.00.(ea.)...
Stamped.steel.with.phosphate.finish
42
Phone orders: 1.800.998.7928
For.ambidextrous.mounting.to.either.carbines.or.full.stocked.rifles.
—.with.all.the.spec..ops..Mamba.features.described.above.
The.Master.Blaster.Combat.Sling
(100300101)...................................................... $29.95
Designed.for.combat.shotguns.and.tactical.rifles..Features.two.
adjustments.for.quick.transitions.&.body.sizing,.and.quality..
tubular.web.construction.
Bushmaster
moDular
accessory
system BIPoD
aDaPter
Government Issue slInG
(12624561).......................................................... $5.50
•..A.1-1/4".wide.black.nylon.web.sling;.54".long,.with.two.black.
metal.buckles
(YHM-638).......................................................... $31.95
•..This.attachment.will.adapt.Harris.(or.other).bipods.to.the.
B.M.A.S.
•..Triple.mount.or.other.accessory.rail.segments
•..Machined.from.aircraft.aluminum,.then.black..
anodized.to.a.mil..spec..finish;.with.steel.bipod.stud
•..Mounts.to.any.Picatinny.or.Weaver.type.rail
Bushmaster moDular
accessory system
a
raIl slInG mount
r
Button slInG DouBle BunGee
“throw & Go” sInGle PoInt
tactIcal carBIne slInG
(YHM-9485S)...................................................... $24.50
•..High.quality.black.nylon.tubing.with.internal.bungee.cords.make.
this.sling.uniquely.adaptable.to.tactical.situations
•..The.sling.attaches.to.the.rifle.with.the.“button”.endplate.
(shown.below),.and.offers.length.adjustment,.comfort.and.
instant.readiness
•..Attach.a.sling.to.any.accessory.rail.(Picatinny.or.Weaver.type).
with.this.B.M.A.S..rail.sling.mount
•..Clamps.onto.a.rail.system.or.fore-end.rail.segment.and.locks.
down.with.one.button.head.Allen.screw.
•..Includes.the.swiveling.sling.stud.below.mounted.on.an.anodized.
aluminum.base
(TGPT)................................................................. $39.95
Button.sling.endplate.in.position......
on.carbine.for.right-handed.carry
Bushmaster moDular
accessory system
swIvel slInG stuD
(YHM-9469)................................... $4.75
Button slInG carBIne enDPlate
•..This.phosphated.finished.steel.endplate.replaces.the.telestock.
locking.collar.on.your.carbine.to.provide.a.solid.mounting.point.
for.the.one-point.sling.(above).
•..Heavy.duty.tab.slips.onto.the.button.for.a.secure.mount
Right-handed.shooter
(M4-M16)........................................................... $19.95
Left-handed.shooter
(M4L-M16).......................................................... $19.95
QuIck Detach slInG swIvels
(KNS-4).......................................................$12.95.(pair)
(pair)
•..These.1.1/4".loop.quick.detach.sling..
swivels.are.heavy.steel.with.a..
phosphate.finish.and.a.screw..
locking.knob.to.ensure.that.the..
sling.won’t.work.loose.from.the.rifle..
swivel
•..Fits.any.firearms.with.standard.sling.swivel..
studs.installed
••..Fits
Fits.our.Four-Rail.Forearms.and.other.B.M.A.S...
our Four-Rail
accessories.to.provide.a.sling.attachment.point..
that.won’t.deflect.the.barrel.when.pulled.tight
•..Rotates.360°.–.machined.steel.with.black..
phosphate.finish.–.threaded.5/16.x.32
•..Use.with.any.standard.Q.D..sling.loop
Bushmaster slInG/BIPoD stuD
A..F1009028.(Stud)............................................... $4.95
B..F1009027.(Washer).. ......................................... $1.00
•..Mounts.to.any.standard,.quick..
detach-type.sling.swivel.
•.3/8".shaft.is.threaded.10/32
•.Use.a.#21.drill.bit.before.tapping
A
B
www.bushmaster.com
43
slings & bipods
steel side-sling AdApter
(12598617K)...................................................... $24.95
•..Allows.mounting.a.sling.to.the.side.of.the.barrel.for.easier.ready.
position.carry
•..Machined.from.gun.steel,.it.is..
adaptable.to.both.standard..
(.625".diam.).and.heavy..
barrels.(.750".diam.)
Shown.installed.and.
separately.
A2 buttstock sling stud
(KNS-5)......................................... $14.95
•..This.phosphate.finished.steel.stud.replaces.
the.old.rear.sling.loop.on.standard.A2.solid.
buttstocks
•..Accepts.any.standard.Quick.Detach.type.sling.
any
type
swivel
sling stud
for MAgpul prs
bushMAster ModulAr
Accessories systeM front
sight sling Mount
(YHM-9468)........................................................ $31.95
•..This.Bushmaster.modular.accessories.system.sling.mount.installs.
easily.(with.three.Allen.Screws).to.position.the.sling.along.the.
side.of.the.front.sight.for.a.comfortable.carry.
•..Includes.a.swiveling.stud.which.accepts.standard.quick.detach.
sling.mounts
(10011)......................................................$5.00.(pair)
....................................................$5.00
•..Replaces.one.of.the.four.socket.button.head.cap.screws.found.
on.the.Magpul.Precision.rifle.stock.(PRS).with.a.sling.stud
•..Threaded.straps.can.be.reversed.giving.8.choices.for.stud.placement
•..Each.BT14.comes.with.a.black.polymer.spacer
sling Mount loops
•..For.vertical.carry.mounting,.the.front.loop.mounts.onto.the.sight.
assembly
•..For.buttstock.application,.attach.the.loop.onto.the.stock’s.rear.
sling.loop
•..Phosphate.finished,.heavy.spring.steel.wire
Front.&.Rear.Set.—.2.Loops
(2698877K).......................................................... $8.50.
or,.Sold.Individually
(2698877)................................................... $5.50.(ea.)
$5.50 (ea.)
Shown.
installed.and.
separately.
bushMAster
ster
ModulAr
Accessories systeM front
sling Mount & Accessory rAil
(YHM-9574)........................................................ $78.50
•..Designed.to.clamp.into.the.standard.AR.front.sight,.this.mount.
combines.a.sling.stud.and.Picatinny.rail.section.for.attachment.
of.flashlight.or.laser.accessories
•..Two.discs.fit.into.the.sight,.lock.together.with.Allen.head.screws,.
then.the.rail.screws.into.those.and.is.oriented.by.means.of.the.
large.knurled.nut
•..Anodized.aluminum.with.steel.screws.and.stud
44
Phone orders: 1.800.998.7928
Shown.
installed.and.
separately.
bushMAster ModulAr
Accessories systeM tActicAl
sling AdApter
(1005-914-2942-T).............................................. $14.95
•..A.tactical.sling.adapter.made.for.attaching.various.types.of.slings
•..Allows.mounting.either.web.type.slings.or.those.that.have.
“lobster.claw”.type.clips
•..Phosphate.finished.steel.adapter.plate.replaces.your.telestock.receiver.end.plate.and.allows.ambi.sling.mounting.on.the.primary,.
or.offside,.shoulder.position.for.a.comfortable.“tactical”carry
pistol grips & buttstocKs
Harris ultraligHt bipods
•.Versatile,.sturdy,.light,.and.fast
fast
•...Folding.legs.w/completely.adjustable.spring-return.extensions.
extensions
•.Sling.swivel.attaches.to.the.
clamp
•..Quality.manufactured.with.heat.
heat
treated.steel.and.hard.alloys.–.
–
all.black.anodized.finish
•.Swivel.45°.for.instant.leveling.
on.uneven.ground.
•..Leg.length:.13".Extended/9"Retracted;.Harris.Model.L.will.
mount.directly.onto.Varminters.&.Predator
•..V.Match.rifles.require.installation.of.sling.bipod.stud
•..Ribbed.AR.handguards.require.the.HE-001.adaptor
•..For.mounting.to.accessory.rails,.use.the.Command.Arms.FBSBP1.or.our.Bushmaster.modular.accessories.system.aluminum.
bipod.adapter
Harris.Model.L.—.for.XM15/AR15-Type/M16.&.others
.(HE-002)........................................................... $118.95.
Harris.Bipod.Adapter.for.AR15-Type.Handguards
.(HE-001)............................................................. $14.95
ergo grip tactical
deluxe pistol grip Kit
it
(ARG-KIT)............................................................. $42.00
•..Ambidextrous.grip.that.mounts.universally.to.any.AR15-Type/
M16.rifle.lower.receiver
•..Injection.molded.with.an.overmolded.rubber.Sure.Grip™..
textured.finish,.and.offers.a.raised.rear.extension.for.improved.
hand.web.support.and.weapon.control
busHMaster Modular
accessories systeM
Folding Foregrip
(YHM-9640).
$79.50
•..The.mounting.base.incorporates.a.push-button.mechanism.for.
fast.deployment.
•..Base.mounts.to.any.Picatinny.rail.with.one.Allen.head.screw.–.
can.be.mounted.to.fold.the.grip.forward.or.backward.according.
to.preference.or.other.accessory.usage
tHe “gapper”
a2 standard pistol grip
(9349127).......................................................... $12.95
(SCH4085)............................................................ $3.95
•..Fills.void.between.the.pistol.grip.and.the.back.of.the.trigger..
polyurethane
guard.—.molded.of.flexible.black.polyurethane
•..Standard.A2.hollow.pistol.grip.of..
molded.black.plastic.with.raised.finger..
ridges,.checkered.panels.and.a..
ribbed.backstrap
Pistol.Grip.Screw
(AN501D416-18)..................................................... $.65
Pistol.Grip.Washer
(MS35335-61)........................................................ $.45
pistol grip plug
(SCH-5)............................................ $4.50
•..Turns.any.standard.A2.pistol.grip.into.a.“stowaway”.grip.for.storage.of.small.items
•..M
olded.of.black.rubber,.snug.friction.fit.holds.it.inside.the.grip.
Molded
of black
cavity
Hogue ar15/M16
pistol grip
•..Easy,.one.screw.installation.on.your.AR15/M16
Pistol.Grip.only
(15000).............................................................. $31.95
ar15/M16 tactical grip
rip
(ARG01).............................................................. $63.95
•..Adjustable.palm.swell.style.grip.adapts.easily.to.different.sized.
hands.and.puts.pressure.in.the.palm.of.the.hand.to.allow.a.
deliberate.and.calculated.trigger.pull
•.Molded.of.heavy.black.plastic
ar15/M16a2
stowaway grip
(56PT87SPG2).. ................................................... $13.95
•..This.M16A2.configuration.grip.—.with.a.serrated.backstrap.and.
finger.groove.—.features.a.trap.door.storage.compartment.for.
holding.cleaning.gear.or.small.parts.
ergogrip
Vertical Fore-end
(ARG-FWD).............................. $52.95
•..Mounts.to.all.Picatinny.rail.and.Weaver.base.
type.rails
www.bushmaster.com
45
ACR ACCessoRies
ACR tRi-RAil hAndguARd
Black (F1000241) ............................................ $124.99
Coyote Brown (F1007088) ................................. $124.99
ACR fixed stoCk
Black (F1000268).............................................. $99.95
Coyote Brown (F1000269) ................................... $99.95
• Made of high-impact composite polymer with a rubber butt pad
• A-Frame design creates stabilized shooting support with a fixed
length of pull of 12.5.” An adjustable, locking cheek weld piece
can raise ½” for better sight alignment with optics.
• A sling can be attached to two of the integral webbing loops,
to a quick detach coupler that can swap to either side or to the
single sling loop, which is also swappable.
ACR telesCoping/folding stoCk
Black (F1000263) ................................................ $149.95
Coyote Brown (F1000264) .................................... $149.95
• Made of high-impact composite polymer with a rubber butt pad
• The seven-position telescoping stock has an adjustable length of
pull from 11” to 14”. The stock also unlocks and folds to the
right side and is held open by a hinge detent, allowing for the
rifle to become more compact but still able to be fired.
• A sling can be attached to two of the integral webbing loops, to
a quick detach coupler that can swap to either side, or to the
single sling loop.
ACR polymeR hAndguARd
Black (F1000234)............................................... $59.95
Coyote Brown (F1000235) ................................... $59.95
• Made of a high-impact composite polymer, reinforced with
a heat shield. The handguard free-floats the barrel, features
superior ergonomic shaping with a small forward lip to prevent
the hand from slipping off the front and the vented slots at the
3–6–9 o’clock positions are sized to accept Magpul MOE rail
sections.
• A single captured pin anchors the handguard to the trunnion.
46
Phone orders: 1.800.998.7928
• Made of 6061-T1 aluminum
with a hard-anodized finish for
extreme durability.
• Free-floats the barrel, has an
integral quick detach plate on
each side for sling attachment,
features MIL-STD Picatinny 1913 rails at 3 and 9 o’clock positions
(measuring 8 ½” with 20 slots) and the 6 o’clock position (measuring 6” with 15 slots) and in conjunction with the monolithic
top rail provides a four-sided accessory mounting solution.
blue foRCe geAR 2-point sling
Black (F1000549)............................................... $49.95
Brown (F1000917) ............................................. $49.95
• A simple 2-point sling designed
specifically for the Bushmaster
ACR.
• Highly adjustable to fit a wide
range of users.
• Constructed of mil. spec.
push-button swivels and low
IR reflective webbing
blue foRCe geAR
udC single-point sling
Black (F1054606)............................................... $42.95
• Made with the finest webbing and sewn with super
heavy-duty #138 bonded
nylon thread.
• Military grade genuine
Fastex™ side release
buckles on both the body
loop and at the connection to the weapon.
• Completely adjustable, ambidextrous, sized for use over body armor.
• Short universal loop adapter for connection to the weapon
mount and compatible with any other Blue Force Gear modular
SOC-C™ system adapters.
• Available in black. Made in the U.S.A.
MAGPUL ACCessoRies
essoRies
30 RoUNd PMAG
WiTH WiNdoW MAGAziNe
(F1001545) ....................................................... $17.95
• Constant-curve internal geometry
for smooth feeding
• Anti-tilt follower for increased
reliability
• Storage/dust cover
• Stainless steel spring for corrosion resistance
• Textured gripping surface
• Ambidextrous MagLevel round indicator windows
Moe iLLUMiNATioN KiT
• Includes everything needed to mount a 1913 Picatinny rail
compatible weapon light to a MOE handguard.
• Four-piece kit includes a short rail section, cantilever rail mount,
two Surefire® optimized pressure switch pad mounts (both old
and new styles), and all mounting hardware.
Black (MAG402-BLK) .............................................$19.95
MissioN AdAPTABLe (MiAd) AR15TyPe/M16 GRiP BAsiC KiT
(F1001538) ......................................................... $35.95
Front
MAGPUL MBUs (FRoNT)
Black (F10001553) or Coyote Brown (F1006838) . $39.95
Rear
• Grip kit has removable/replaceable
front and rear
panels for a custom
fit over multiple
hand sizes
• Features improved
ergonomics and positive anti-slip texture on both sides and
rear backstrap
• Removable inner core that allows for storage (3 round plug
included); custom storage of batteries (waterproof) or bolt/firing
pin is available with optional cores
• Kit includes 3 size backstraps (S, M, L); 4 frontstraps, including
integrated enhanced trigger guard; 3 round core plug; and
installation hardware
MAGPUL MBUs (ReAR)
Black (F1001554) or Coyote Brown (F1006840) ... $57.95
MAGPUL Ms3 sLiNG
Designed and built to allow for weapon connector hardware to be
customized for shooter’s weapon set-up. Design adjusted to adapt
quickly between single and two-point configuration allowing for
easy transition from “weapon shoulder” to “reaction shoulder.”
MAGPUL PMAG 20 & 30 RoUNd
W/BUsHMAsTeR LoGo
30 Round
Black (F1001574) or Coyote Brown (F1001575) ...............$14.95
20 Round
Black (MAG217-BLK) .........................................................$13.95
• Compatible w/ASAP, RSA & Standard sling systems
• Polymer construction for reduced weight and silent operation
• Modular D-ring design
• Optimized for use with the ASAP & RSA
• Webbing adjustable for shooter size and preference
• Quick detach buckle for emergency situations
• High strength tubular nylon webbing
Flat Dark Earth (MAG5403-FDE), OD Green (MAG503-ODG) or
Black (MAG503-BLK) ............................................. $49.95
www.bushmaster.com
47
MAGPUL ACCESSORIES
PRS.Stock.–.left.side.
showing.std..butt.pad.
and.sling.loop
MAGPUL ASAP (AMbIdExtROUS
SLInG AttAChMEnt POInt)
•.ASAP.(Ambidextrous.Sling.Attachment.Point).allows.a.range.of.
motion.greater.than.180.degrees,.enabling.true.ambidextrous.
weapon.manipulation.for.both.left-.and.right-handed.shooters
•.Replaces.the.standard.AR15-Type/M4.carbine.stock.receiver.end.
plate,.providing.a.tactical.advantage.by.minimizing.snagging.
and.facilitating.easy.transition.to.and.from.weapon.and.reaction.
side.shoulders
(MAG500)........................................................... $29.95
PRS.Stock.with.slip-on.
LimbSaver®.Recoil.Pad.
mounted.(sold.separately)
.50.Cal.LimbSaver®
MAGPUL PRS PRECISIOn RIfLE StOCk
(MAG300-BLK)................................................... $255.00
MAGPUL RSA (RAIL SLInG
AttAChMEnt)
•.The.RSA.provides.a.forward.sling.attachment.point.for.the.
Magpul.MS2.or.MS3.and.other.clip-in.systems.
•.Made.from.precision.cast.black.manganese.phosphatized.steel,.
the.RSA.attaches.to.any.standard.1913.Picatinny-spec.rail..The.
RSA.has.been.proven.to.withstand.stress.tests.of.over.300.lbs.
(MAG502)........................................................... $29.95
CtR tELEStOCk
(MAG311-BLK).(F1001558).................................. $97.00
•..Mounts.on.commercial.carbine.receiver.extension.tube..
(not.included)
•..Premium.chrome-silicon.spring.provides.positive.locking.and.
long.service.life
•..Supplemental.friction.lock.eliminates.accuracy.robbing.wobble
•..Sloping.cheek.weld.combines.a.slim.profile.with.user.comfort
•..Shielded.release.latch.prevents.snagging.and..
accidental.operation
•..Side.mounting.slots.accept.optional.cheek.risers.for.non-AR15/
risers for non-AR15/
M16.applications
•..Compatible.with.Single-Point
Single-Point®.sling.mounts
sling mounts
•..Rear.—.Push-button.Q.D..sling..
Q.D. sling
mounts.accommodate.up.to..
up to
1.5".swivels.(ambidextrous)
(ambidextrous)
•..Rear/bottom.—.1.25".sling.loops
sling loops
•..Toe.—.Lanyard.hole.for.custom..
custom
para-cord.rigs
•.Black.in.color
48
Phone orders: 1.800.998.7928
•..The.Generation.II.Precision.Rifle.Stock.(PRS™).is.designed.to.be.
a.field.precision.stock
•..Adjustable.for.both.height.and.length.of.pull,.at.its.shortest.LOP.
it.is.about.the.length.of.an.A1.type.stock.and.extends.about.
1/2”.longer.than.an.A2.stock
•..Features.a.billet.machined.buttplate.with.a.rubber.butt-.ad,.mil..spec..
phosphated.steel.shafts,.and.aluminum.ball.detent.knobs
•..The.PRS.easily.replaces.the.standard.AR15/M16.stock.and.
uses.stock.A1/A2.rifle.length.receiver.extension.without.the.A2.
spacer.–.comes.with.all.mounting.hardware.and.two.ambidextrous.1.25”.sling.loops.that.can.be.positioned.front.or.rear
•.Weight:.1.855.pounds./.Retracted
•..Length:.10.45"./.Extended.length:.11.45"./.Height.adjustment:.0.75"./.Rubber.butt.pad.thickness:.0.25"
MAGPUL ACCESSORIES
MOE POLyMER RAIL SECtIOnS
MOE polymer rail sections allow the attachment of various
1913 Picatinny spec rail mounted accessories to be installed.
• Designed for use with MOE handguards & standard plastic
handguards
ACS (AdAPtAbLE CARbInE/
StORAGE) StOCk
• Use with lights, verticals grips & other rail accessories
• Available in 4 lengths
The ACS carbine stock is a drop-in replacement for the standard
M4 stock body, offering enhanced strength, stability, battery/
equipment storage, and improved cheek weld.
• Reinforced polymer construction
• Sloping cheek weld for comfort
• Dual-side battery storage tubes & integral storage compartment
• Friction locking mechanism to eliminate excess stock movement
• 0.30” thick rubber butt pad included
MOE RAIL L2, 5 slots — MAG406-BLK...................... $5.95
ACS Carbine Stock Milspec (for mil. spec. diameter receiver
extensions) LOP 11.1”-14.4” — MAG370-FDE, MAG370FOL, MAG370-ODG, MAG370-BLK ........................ $134.95
Black MAG401-BLK ............................................. $ 59.95
Flat Dark Earth MAG401-FDE................................. $ 59.95
OD Green MAG401-ODG ....................................... $ 59.95
• Premium chrome-silicon lock spring provides positive locking
and long service life
• Sloping cheek weld combines a slim profile with user comfort
• Shielded release latch prevents snagging and accidental
operation
• Side mounting slots accept optional cheek risers for nonAR15-Type/M16 applications
• Compatible with Magpul ASAP® and other receiver-mount
sling attachments
ACS Carbine Stock Commercial (for commercial diameter
receiver extensions) LOP 11.1”-15.2” — MAG371-FDE,
MAG371-FOL, MAG371-ODG, MAG371-BLK ........... $134.95
MOE RAIL L5, 11 slots — MAG409-BLK.................... $8.95
MOE StOCkS
MOE HAndGUARdS (CARbInE)
MOE CARbInE StOCk
The MOE carbine stock is a cost-effective drop-in replacement
for the standard M4 stock body, offering enhanced strength
and ergonomics.
• Original Magpul engineering and material quality in an
economical package
• A-Frame design
• Reinforced polymer construction
• Streamlined exterior
• Rubber butt pad and shielded operation lever included
Black MAG405-BLK ............................................. $ 29.95
Flat Dark Earth MAG405-FDE................................. $ 29.95
OD Green MAG405-ODG ....................................... $ 29.95
• Replaces standard M4 carbine-type handguards
• Easy to install utilizing existing front handguard retaining cap
and delta ring
• MIL-STD 1913 Picatinny rail mounting slots at the 2–6–10
o’clock positions
• Reinforced, heat-resistant polymer construction
• Integral aluminum heat shield
• Front lip and side extensions, shields hand from hot gas block
MOE Carbine Stock Milspec (for mil. spec. diameter receiver
extensions) LOP 10.4”-13.7” — MAG400-FDE, MAG400FOL, MAG400-ODG, MAG370-BLK .......................... $59.95
MOE Carbine Stock Commercial (for commercial diameter
receiver extensions) LOP 10.7”-14.5”— MAG401-FDE,
MAG401-FOL, MAG401-ODG, MAG401-BL ............... $59.95
www.bushmaster.com
49
pistol grips & buttstocks
Moe hanDguarDs (MiD-length)
Black.MAG418-BLK................................................ $34.95
Flat.Dark.Earth.MAG418-FDE.................................. $.34.95
OD.Green.MAG418-ODG........................................ $.34.95
•.Replaces.standard.AR15-Type.mid-length.handguards
•..Easy.to.install.utilizing.existing.round.or.triangular.front.
handguard.retaining.cap.and.delta.ring
•..Slots.at.the.2–6–10.ten.o’clock.positions.for.mounting.MIL-STD.
1913.Picatinny.rails
•.Reinforced,.heat-resistant.polymer.construction
•.Integral.riveted.aluminum.heat.shield
•.Front.lip.and.side.extensions,.shields.hand.from.hot.gas.block
Moe hanDguarDs (rifle)
Black.MAG419-BLK................................................ $39.95
Flat.Dark.Earth.MAG419-FDE................................... $39.95
OD.Green.MAG419-ODG......................................... $39.95
•..Replaces.standard.M16-Type.rifle-length.handguards
•..Easy.to.install.utilizing.existing.triangular.or.round.front.
handguard.retaining.cap.and.delta.ring
•..Slots.at.the.2–6–10.o’clock.positions.for.mounting.MIL-STD.
1913.Picatinny.rails
•..Reinforced,.heat-resistant.polymer.construction
•..Integral.riveted.aluminum.heat.shield
•.Front.lip.and.side.extensions,.shields.hand.from.hot.gas.block
•..Relieved.area.at.the.top.rear.accommodates.most.overhanging.
optic.mounts
Moe grips
Black.MAG415-BLK................................................ $20.95
Flat.Dark.Earth.MAG415-FDE................................... $20.95
OD.Green.MAG415-ODG......................................... $20.95
•.P. rovides.Magpul.quality,.feel.and.durability.in.an.economical,.drop-in.
upgrade.for.the.standard.AR15-Type/M16/M4.pistol.grip
•..Ergonomic,.hand.filling.design.combines.aggressive.texturing.with.
storage.core.capability
•..One-piece.reinforced.polymer.construction.has.the.durability.to.
withstand.operational.environments
•..Accepts.optional.storage.cores.for.gear.stowage,.includes.basic.grip.cap
•.All.mounting.hardware.included
liMbsaver® slip-on
recoil paD
(LimbSaver-M)......................... $36.99
(LimbSaver-M)
•..A.slip-on.recoil.pad.that.offers.easy.installation,.
recoil-reducing.technology.and.molding.from.
proprietary.NAVCOM™.noise.and.vibration.
control.material.
Displace.shock.on.a.0.to.2500.Hz.spectrum.and.ensures.maximum.
••..Displace
shock
0
shock.relief.with.excellent.protection.for.the.shooter
•..Fits.stocks.from.4.13/16".height.x.1.5/8".thickness.up.to.5.1/8".
x.1.3/4",.and.the.1".thick.pad.will.add.1".length.to.trigger.pull
hook style buttstock
uttstock
for ar15/M16
(16-01-02).......................................................... $44.95
Mvg™ Moe vertical grip
Black.MAG415-BLK.................................................$19.95
.Flat.Dark.Earth.MAG415-FDE...................................$19.95
OD.Green.MAG415-ODG..........................................$19.95
Foliage.MAG415-FOL..............................................$19.95
•.Designed.for.use.with.MOE.and.ACR™.handguards
•.Basic,.lightweight,.cost-effective.vertical.fore.grip
•.Attaches.directly.to.MOE.and.ACR™.handguards.without.any.rail.
needed
•.Shape.is.ergonomically.designed.for.use.as.a.traditional.vertical.grip
•.Optimized.for.use.with.the.“thumb.break.method”.of.shooting.as.
taught.by.Magpul.DynamicsSM
50
Phone orders: 1.800.998.7928
•..A.molded.fiberglass.polymer.stock.offering.the.eye.relief.of.the.
newer.M16A2.type.with.1".additional.length.of.pull
•..The.“hook”.gives.added.stability.to.sandbag.rest.when.shooting.
with.left.hand.across.the.body.and.into.the.hook
•..Uses.the.standard.issue.buttplate.but.offers.almost.double.the.storage.
—.easily.replaces.the.standard.stock
Delta style stock
cheekpiece
(6200)............................. $74.50
•..A.quality.accessory.for.your.A2.buttstock.—.designed.to.improve.
accuracy.by.eliminating.parallax.problems
•..It.shoulders.easily.and.provides.the.proper.cheek-weld.for.
telescopic.sight.use
•..Installs.with.no.alteration.to.original.butt.cap.or.sling.loop,.and.is.
designed.specifically.for.the.new.style.A2.stock.(can.be.modified.
to.fit.the.A1)
complete A2 trApdoor
buttstock Assembly
(A2.STK.COMP).................................................... $79.95
•..The.newer.A2.design.is.5/8".longer.than.original.A1.for.greater.
shooting.comfort.and.improved.trigger.pull.length.of.13.5".
•..Trapdoor.storage.space.in.the.buttstock.provides.room.for.spare.
parts.or.an.Otis.buttstock.stowage.cleaning.kit.(see.Gunsmithing.section)
•..Includes.buttstock.w/
trapdoor.buttplate,.sling.
loop,.buffer,.buffer.tube,.
buffer.spring,.spacer.and.
vented.buttplate.screw
keleton stock
the skeleton
.(SKELETON.STOCK)............................................. $112.95
•..Radically.different.stock.design.for.all.AR15-Type.rifles.offers.a.
comfortable.neoprene.foam.sleeve.and.a.skeleton.frame.
•..A.comfortable.rubber.buttplate.is.included,.as.is.a.swiveling.sling.
loop.that.can.be.mounted.forward.left.or.right,.or.on.the.bottom.
of.the.buttplate
•..Length.10.5"./.Weight.14.03.oz..
*.This.does.not.include.buffer.tube,.buffer.or.spring.(use.already.
existing.parts.or.buy.the.kit.below)
six position Fiberite
telescoping stock
Assembly
(1005-087-8988-PK)......................................... .$106.95
•..Our.standard.telestock.–.a.heavy.duty.design.incorporating.a.six.
position.latch.assembly.
•..Ribbed.body.offers.extra.strength
•..A.six.position.receiver.extension,.machined.from..
solid.aluminum.extrusion.
•..Lower.lip.face.acts.as.a.timing.edge.to.insure.the.buffer.retainer.
is.held.correctly.and.the.extension.is.positioned.correctly
complete Fixed position telestyle stock Assembly
(1005-087-8988PEK)......................................... $106.95
•..Includes.carbine.length.receiver.extension,.buffer.and.spring
originAl style Fiberite
telestock Assembly
(ALEO-001K)...................................................... $106.95
•..Original.style.fiberite.telestock.body.with.a.four.position.telescoping.
aluminum.extrusion.extension.tube
•..Original.design..
metal.telestock..
buffer.with.cylindrical..
cylindrical
weights.and.the.carbine.length.buffer..
carbine length buffer
spring.are.included
included
tube
•..Has.mil..spec..tube
skeleton stock
extended recoil pAd
d
(SKEL-1IN-BUTTPAD)................ $13.95
•..Extra.thick,.molded.rubber.recoil.pad..
fits.all.the.skeleton.stocks.including..
the.Shorty.Model
weight
•..1.inch.in.thickness,.and.3.2.oz..in.weight
•..Installs.easily.in.place.of.existing.pad.—..
screws.are.included
shorty skeleton stock kit
including cAr buFFer And spring
(SKEL-SH-STK-KIT)............................................... $148.95
•..Similar.to.the.original.Skeleton.Stock.above,.but.with.an.overall.
length.of.7.3/4".-.weight.of.12.8.oz..
•..The.neoprene.sleeve.around.the.buffer.tube.offers.a..
comfortable.cheek.weld
•..A.1/2".rubber.recoil.pad,.a.sling.swivel.(mounts.either.left.or.
right.side,.or.on.buttplate.base),.a.short.buffer.tube,.a.CAR.
buffer.and.spring,.and.all.necessary.screws.are.included.to.swap.
over.from.any.AR-Type.rifle.or.carbine
Shorty.Skeleton.Stock.without.those.parts
(SKEL-SH-STK).................................................... $134.95.
skeleton stock
kit For
chAngeover From
A telestock
(SKELETON-STOCK-K)........................................... $154.95
•..Includes.Skeleton.Stock.with.butt.pad.and.hardware.(as.above),.
plus.standard.buffer.tube,.standard.buffer.and.spring
replAcement FoAm sleeves For
skeleton stocks
Standard.Stock.(SKEL-FOAM-OT-8.2).......................... $4.50
Shorty.Skeleton.Stock.(SKEL-FOAM-OT-5.5)................ $3.95
NOTE:.These.sleeves.install.easier.with.WD40.
www.bushmaster.com
51
extended buttplate
for ar15/M16
(16-09-02) .........................................................
......................................................... $24.50
r-15 stock
• Features Advantage® Max1™ camouflage pattern
• Heavy duty design incorporating a 6-position latch assembly
• Ribbed body offers extra strength
• Six position receiver extension, machined from solid aluminum extrusion
• Lower lip face acts as a timing edge to insure buffer retainer is held correctly and the extension is positioned correctly
R15 Tele (C1005-087-8988) .............................. $139.95
cheekpiece for
bushMaster
six position
telestock
(7200) ............................................................... $37.50
• Designed to offer excellent cheekweld and appropriate head position for scope and optic use, it fits the newer Bushmaster six-position “ribbed body” telestocks
• Snaps securely onto the telestock body • Includes a watertight small parts storage compartment in the upper portion of the cheekpiece, sealed with a rubber o-ring screw-in plug
c
cheekpiece for
older fiberite
t
telestocks
(7000)
(7000) .......................... $37.50
• This
telestock cheekpiece
• This telestock cheekpiece allows the use of scope, laser or night vision devices with comfort
• Molded of tough black plastic, it snaps on to most older style fiberite telestocks with a secure pressure fit and features a builtin watertight small parts storage compartment that is sealed with an o-ring screw-in plug at top rear of the unit • Helps take all the “rattle” out of fiberite telestocks
Note: For use on fiberite telestocks — will only fit the original type telestocks
A
B
• Glass-filled, black plastic composite buttplate • Adds 1 1/4” length to the standard issue AR15/M16 buttstock • Does block access to the buttplate trapdoor
• Also fits on the Stubby Stock
1
2
9349119: Includes Stock, Trapdoor Buttplate & Sling Loop
3
8
4
5
6
7
individual a2 solid
buttstock parts
1. A2 Solid Buttstock (9349119) .......................... $37.50
2. Trapdoor Buttplate Assembly A2 (9381380) ........ $21.50
3. Buffer – Standard (8448615) ........................... $15.95
4. Stock Spacer & Screw (A2 STK SPAC/SCRW) ........ $6.50
5. A2 Buttplate Screw (9349128) ........................... $3.50
6. A1 Buttplate Screw (8448627) ........................... $3.50
7. Receiver Extension — Standard A2 (8448581) .. $21.95
8. Buffer Spring —Standard (8448629) .................. $5.95
1
3
2
4,6
5,7
8
Telestock Bodies are NOT available 9
10
11
12
13
separately.
individual telestock parts
1. Buffer – Telestock (1005-914-4578) ................. $16.95
2. Buffer – Telestock (8448730-M2) ..................... $26.50
(Heavy weight for the M16M4 machine gun)
3. Buffer Spring (Telestock) (1005-914-4564) .......... $5.50
4. CAR Receiver Extension (1005-914-2929-6) ........ $26.50
(for the newer style 6-position telestocks)
5. Telestock Locking Nut (5310-917-1154) ............... $7.50
(for the newer style 6-position telestocks)
6. CAR Receiver Extension (1005-914-2929-P) ........ $26.50
(for old style 4-position telestocks)
7. Telestock Locking Nut (5310-917-1153) ............... $7.50
rubber telestock
tock butt pads
p
• These molded black rubber pads securely fit the buttplate of the telestock to offer recoil reducing comfort and positive, non-slip shouldering
A. “Ribbed” Style Telestocks (2698828) ................. $20.50 B. Older Style Telestock (2698827) ....................... $16.95 Also fits the Carbon 15 rifles with the original design buttstock and can be modified to fit new reinforced Carbon 15 buttstock
52
Phone orders: 1.800.998.7928
(for old style 4-position telestocks)
8. Telestock Receiver Plate (1005-914-2942) ............ $7.50
9. Telestock Slide Locking Pin (1005-914-3229) ........ $6.50
10. Telestock Lock Pin Spring (1005-916-9178) ........ $1.00
11. Telestock Latch (1005-087-8987P) .................... $7.50
12. Telestock Lock Pin Nut (5310-917-1215) ............ $4.50
13. Telestock Lock Pin Roll Pin (MS16562-106) ......... $ .50
Handguards & accessories
busHmaster
usHmaster modular
accessory system
Four-rail split Handguards
• The two piece design of these B.M.A.S. handguard sets allows
quick and easy installation of a Picatinny four-rail accessory
system on most AR-Type rifles*
• Machined of quality aircraft aluminum, they snap right in place
of standard carbine or rifle handguards, and offer four full
length Picatinny rails for the flashlight/laser sight accessories
of your choice
• Rails are positioned at 12–3–6–9 o'clock
• Top handguard can be used in conjunction with an M203
grenade launcher
• Vented to keep your barrel cool, finished in mil. spec. matte black
anodize to eliminate glare and protect against corrosion
For Carbine
(YHM-9670) ..................................................... $191.50
For Rifle
(YHM-9803) ..................................................... $212.95
*Note: These sets will not fit our DCM or gas piston carbine.
busHmaster
master modular
accessory system
Handguard rails
• Add an accessory mounting point to any standard
rifle or carbine handguard with these Picatinny
configuration rails
• Mounting requires removal of handguard and inner
shield – they are screwed to the handguard through the existing
vent holes
• CAR-length rail will fit on a rifle-length handguard
• Due to possibility of movement, we do not recommend installation of optics or lasers on these rails
B.M.A.S. Rail for Rifle Handguard
(YHM-Hgd-Rail-Rif) ................................................ $60.50
B.M.A.S. Rail for CAR Handguard
(YHM-Hgd-Rail-CAR) .............................................. $40.50
A
B
sure-grip
ure-grip panels For
multi-rail Fore-ends
• Black rubber grip panels for all rail fore-ends – with
Bushmaster logo molded in
• Snap tightly onto the rails for a non-slip grip, rail protection and
handling comfort
A. Sure-Grip Full Length Rail Cover
(SCH-6L) ............................................................. $10.95
busHmaster modular
accessory system Four-rail
Free Floater Forearms
• Four Picatinny rails are machined into these free floating foreends to offer your AR type firearm unlimited mounting options
for sights, scopes, grips, lights and lasers
• Venting slots all around aid in barrel cooling, and rail front edges
are drilled and tapped to accept the B.M.A.S. swivel sling stud
• The rifle model fits 20" and longer barrels; the carbine version is
designed for 16" barrels
• Assemblies include forearm, barrel nut and jam nut (barrel
disassembly is required for installation)
Rifle Length
(YHM-9480) ..................................................... $169.95
Four-Rail Carbine Length
(YHM-9479) ..................................................... $148.95
*Note: This unit will not fit our gas piston carbine.
5 3/4" long for full length coverage on carbine fore-ends. Covers
fifteen rail slots. Molded of black rubber with 3 Bushmaster logos
between raised ribs.
B. Sure-Grip 1/3rd Length Rail Cover
(SCH-6) ................................................................ $3.95
1-3/4" black rubber grip panel (covers five rail slots)
for Picatinny rail fore-ends — with BFI logo.
low proFile rail covers
overs
B
• Covers protect your hands from sharp rail edges
A
• Smooth low profile appearance and protect
rail areas from damage
• Molded of black santoprene in two lengths — easily cut for
custom applications
A. Five Slot Low Profile Rail Cover
(SCH-4370) .......................................................... $3.95
B. Full Length Low Profile Rail Cover
(SCH-4373) ........................................................ $11.95
www.bushmaster.com
53
Handguards & accessories
a.r.M.s. #50 M-cV s.i.r.
systeM for a3 carbines
(ARMS-50M-CV SIR) ........................................... $319.00
carbine & rifle lengtH
M203 Handguards
• Bottom is open to allow attachment of the M203
Grenade Launcher or similar type flare launchers
• Government issue, molded black nylon with internal aluminum
heat shields
• Snap into the handguard cap and delta ring in place of standard
handguards
• Provides the leverage needed to compress the weld spring inside
the delta ring, and eliminates the need for a second pair of hands
to help remove AR15/M16 two-piece handguards
For Carbine
(12990563)....................................................... $51.50
For Rifle
(8448377)......................................................... $46.50
• Carbine length 5.56mm/.223 cal. “free-float”system that can be
installed in less than 5 minutes directly to the standard barrel nut
(without the delta ring)
• The front sight, gas tube, front handguard retaining cap, barrel,
and barrel nut do not need to be removed for installation, and
no special tools are required (the S.I.R. std. sling swivel is
usable for installation as it is ground with a “screwdriver blade”
on its end)
• Perfect alignment with the receiver can be accomplished via built
in alignment anti-rotation locking tabs
• Weighs 8.6 oz., includes Q.D. indirect air flow heat shields and
thoroughly vented for superior barrel cooling
• Rail segments at the 3–6–9 o’clock positions can be
exchanged, repaired or replaced without removing the top rail
Vented free-float tube fore-end
(VAR-01K) ........................................................... $95.95
a.r.M.s. #51c sliMline s.i.r.
systeM for a1/a2 carbines witH
solid carry Handle
(ARMS-SIR51-C)................................................. $429.95
• High quality technical fore-end for the AR15-Type
carbine combines barrel free-floating, light weight
and a multitude of accessory attachment rails
• Slimline Model 51C in the A.R.M.S. S.I.R. system is
intended to fit the A1/A2 solid carry handle carbines
• Leaves barrel free-floating from the barrel nut forward, and is
approximately 1/4" narrower than other S.I.R. system models
• The S.I.R. Model 51C clamps solidly onto the upper receiver’s
fixed carry handle (both the carry handle channel and the
handle front support, utilizing two A.R.M.S.® self locking
thumbnuts) to provide an extremely rigid fit with no movement
of rail or attachments
• Extended bi-level rail platform will mount various scopes,
and red-dot or holographic sights, and offers the possibility
of forward mounting optics to co-witness with the iron sights
through the channel in the upper rail
• Total weight is 18.9 oz. including the two side and one bottom
accessory rail segments and sling swivel
NOTE: This will not mount on the A3 Removable Carry Handle.
For alternate optics mounting options for the A1/A2 solid
carry handle carbines, see also the A.R.M.S. #39A2 Bi-Level Rail
(ARMS-39) ................................................................ $148.95
54
Phone orders: 1.800.998.7928
• Vented, free-floating, three piece fore-end can be
easily installed for improved accuracy on your rifle
• A new barrel nut and locking ring replace your existing barrel nut
(front sight, gas tube and barrel nut removal is required)
• Aluminum free-float tube screws on, and after “timing” the cooling
vents a locking ring holds it in position
• The center of the tube is knurled for a non-slip grip, and a
standard stud is included for bipod or sling
• High quality aircraft aluminum — black anodize finished
a2 rifle Handguards
(9349059)................................................ $21.95.(pair)
•..Compression.molded.of.black.polymer.
composite.material.(not.injection.
molded.—.these.will.not.melt.during.
full.auto.or.rapid.fire)
•..Non-reflective.matte.black.finish.and.are.designed.to.fit.rifles.
with.the.triangular.handguard.cap
•..Internal.aluminum.heat.shields.are.included.to.protect.hands.
from.barrel.heat.buildup
a2 carbine lengtH
Handguards
(1005-914-4572)...................................... $21.95.(pair)
•..Injection.molded.of.black.polymer.composite.–.internal.
aluminum.heatshields.included
•..Can.only.be.used.with.the.round.handguard.cap
NOTE:..Rifle-length.handguards.fit.into.the.triangular.cap..Standard.
carbine.handguards.fit.into.the.round.cap..M4.(oval.profile)..
carbine.handguards.fit.into.either.the.round.cap.or.the.“notched”.
round.cap..See.handguard.cap.prices.and.part.numbers.
busHMaster V MatcH
“free-floater” tubular
aluMinuM fore-ends
•..Hard.anodize.finished.aluminum.assemblies.fit.over.standard.
and.match.profile.barrels.“free-floating”.them.from.receiver.
forward.for.optimum.accuracy
•..Screwed.directly.onto.the.upper.receiver.in.place.of.existing.
handguards,.barrel.nut.and.handguard.cap
•..Installation.requires.removal.of.the.front.sight.base.
For.Rifles
(SGW-02B).......................................................... $63.95
For.Carbines
(SGW-01K).......................................................... $63.95
M4 dual HeatsHield
Handguards
(1005-914-4574)...................................... $45.50.(pair).
•..Dual.heatshields.effectively.increase.barrel.
cooling,.especially.in.
rapid.fire
•..Originally.designed.for.
use.on.full-auto.machine.
guns,.this.improved.handguard.set.will.fit.most.carbines.with.
either.type.of.round.handguard.cap
•..Molded.of.black.thermoplastic.composite.material.with.heavy.dual.
aluminum.shields.(one.finished.black/one.silver)
Also.available:
M4.Single.Heatshield.Handguards
(1005-914-4573)...................................... $42.50.(pair)
daniel defense oMega rail
(DD-OMEGA7)..................................................... $289.00.
•.Free-floating.barrel.design
•.Lightweight
•.User.installed.with.no.special.tools
•.ZERO.modification.to.host.weapon
•.Uninterrupted.upper.rail.platform
•..Integral.QD.sling.swivel.mounts.with.limited..
rotation.feature
•.Aircraft.grade.aluminum
•.Military.specification.Type.III.hard.coat..
anodized.finish
•.Military.specification.fasteners
•.Military.specification.1913.Picatinny.rails
•.Will.fit.our.gas.piston.conversion.kit
Ht Mount
snap-on forearM ligHt
•..This.heavy.plastic.base.(shown.installed,.and..
installed, and
separately).snaps.onto.AR-15/.
M16.rifle.fore-ends.(won’t.fit..
the.CAR.handguards)
for firm mount
•.Detents.grip.the.fore-end.vent.holes.for.a.firm.mount
•..On.the.side,.a.rail.segment.is.mounted.which.is..
designed.to.accept.a.variety.of.tactical.flashlights
(HPM3)............................................................... $31.95
www.bushmaster.com
55
gunsmithing Accessories
surefire g2™
2™
nitrolon® flAshlight
(G2-BK)............................................................... $36.00.
•..A.compact.(palm.size).high-intensity.incandescent.flashlight.for.
tactical,.self-defense.and.general.use.with.a.tough.polymer.body
•..Its.smooth,.brilliant,.pre-focused.tactical-level.beam.has.four.times.the.
light.of.a.two.D-cell.flashlight.–.bright.enough.to.temporarily.blind.
and.disorient.an.opponent
•..Small.size,.light.weight.and.high.output.make.it.a.perfect.
everyday.carry.light
•..Rugged,.lightweight,.corrosion-proof.Nitrolon.polymer.body.(black.
part.number.listed.here.—.olive.drab,.tan.or.yellow.flashlights.
available.on.special.order)
•.O-ring.sealed,.weatherproof.
•..Tailcap.switch:.press.for.momentary-on,.twist.for.constant-on.
•..Switch.lockout.prevents.accidental.activation.during.transport.
or.storage.
•.Max.output:.65.lumens
•.Run.time:.60.minutes.
•.Length:.4.90”/.Weight:.4.1.oz..
•.Batteries:.Two.123A.lithium
surefire m79
flAshlight mount
(M79)................................................................. $38.00.
$38.00
•..A.sturdy.aluminum.and.polymer.mount.that.will.clamp.any.1”.
diam..flashlight.to.any.rifle.or.carbine.equipped.with.a.Picatinny.
accessory.rail
•..Flashlights.are.held.with.an.adjustable.cam-type.locking.clamp
rAil mount switch Kit for
streAmlight/surefire flAshlight
Pressure switches
(SCH-4366-KT)..................................................... $12.95
•..3.piece.kit.to.mount.Streamlight.or.SureFire.switches.onto.any.
Picatinny.rail.without.adhesives.or.Velcro
•..Base.snaps.on.the.rail.and.the.insert.encapsulates.the.switch.
pad.—.molded.black.santoprene.thermoplastic
gunsmithing tools & suPPlies
Our.company.policy.is.to.offer.gunsmithing.assembly.at.no.charge.when.
parts.are.purchased.from.us.(with.the.exception.of.sight.bases)..We.
will.also.offer.our.professional.gunsmithing.services.to.any.customers.
who.care.to.ship.us.their.AR15-Type.firearms.or.assemblies.for.repair.or.
buildup.–.and.we.will.work.on.brands.other.than.Bushmaster..Gunsmithing.time.is.charged.at.$40.00.per.hour,.and.we.charge.a.flat.$16.50.
fee.for.return.shipping.of.your.rifle,.upper.or.parts..For.an.estimate.on.
your.gunsmithing.needs,.call.1-800-998-7928.during.business.hours,.
or.e-mail.a.complete.description.of.your.needs.to:.Techsupport@
bushmaster.com
5.56mm nAto cAliBer
go-gAuge
•..Used.to.determine.adequate.headspace
•..Chamber.depth.enough.for.oversized.bolt
(HGO223G)......................................................... $30.00
5.56mm
nAto cAliBer
no-go gAuge
•.Used.to.determine.excess.headspace
•.Chamber.depth.too.great,.or.undersized.bolt
(HGO223N.............................................................$30.00
surefire scout light m600B
(M600B)........................................................... $310.00.
•..Two-battery.Scout.Light.from.SureFire.clamps.to.any.
Picatinny.rail.by.means.of.a.knurled.thumb.screw.on.its.
rigid.M75.rail.mount
•..Powerful.LU60A.incandescent.lamp.module.produces.65.
lumens.of.light
•..A.momentary-on.remote.tape.switch.is.included.as.well.as.a.
tail.cap.on/off.switch.
•..Two.SureFire.lithium.SF123A.3.0.volt.batteries.(10-yr..shelf.life).
•..Output/run.time.—.max..output.of.65.lumens.with.a.
60-minute.run.time.
•..Click.on/off.and.momentary.switch.
•..Mil..spec..Type.III.hard-anodized.aluminum.body
56
Phone orders: 1.800.998.7928
5.56mm nAto
cAliBer field gAuge
•..Used.to.determine.overly.excessive.headspace.due.to.chamber.
and.bolt.wear.
(HGO223F).......................................................... $30.00
308 cAl. heAdsPAce gAuge
308.Cal..Go-Gauge.
(HGO243G)......................................................... $30.00
308.Cal..No-Go.Gauge
(HGO243N)......................................................... $30.00
308.Cal..Field.Gauge
(HGO243F).......................................................... $30.00
Also.available.—.headspace.gauges.for..50.BMG.caliber...
Call.for.pricing..
BushmAster stAndArd
Armorer’s tool Kit
• Kit includes: dual slot barrel vise jaw blocks; drift punches; barrel
wrench; receiver push pin tool; technical service manual; sight
tool; cleaning kit; spring package w/standard buffer spring; and
assorted pins and caps
(Part #s A1 ARM KIT/A2 ARM KIT) ..........................$85.95
deluxe Armorer’s tool Kit
• A complete tool kit for all necessary repairs and installations
(choose from A1 or A2 version — tools differ)
• Kit includes: dual slot barrel vise jaw blocks; drift punches;
Armorer’s barrel wrench; 20-page technical manual; sight tool;
cleaning kit; telestock wrench; go-, no-go- and field headspace
gauges; firing pin protrusion gauge; receiver push pin tool;
spring package with standard buffer spring; and assorted pins
and caps
(Part #s A1 ARM KIT / A2 ARM KIT) ..................... $180.95
mAster Armorer’s tool Kit
• Kit includes: Armorer’s Action Block kit; lower receiver vise block;
heavy duty combination Armorer’s wrench; barrel vise jaw
blocks; drift punch set; rifle cleaning kit; .223 go/no-go/field
headspace gauges; firing pin protrusion gauge; A1 and A2 sight
tools; receiver push pin tool; 200-page M16 A2 Marine Corp.
technical manual; M16 A1 technical manual; Armorer’s DVD;
Tetra gun care kit; 2 complete spring packages (with carbine
& rifle buffer springs); and an assortment of pins, detents and
caps for fast and foolproof assemblies and installations
(Part #s A MARM KIT) ......................................... $319.95
BArrel Vise
JAw BlocKs
• Dual slot design for the
installation of barrels, front
sight removal rear sight work,
cleaning, or any job that requires
immobilization
• Not limited to AR15/M16 service work
u. s. goV’t.
tech mAnuAls
• Complete maintenance, repair
and troubleshooting information
for either the A1 or A2 model
For M16A2
(TM9-1005-319-23P)........................................... $11.95
For M16A1
(TM9-1005-249-24P)........................................... $11.95
drift Punch set
• Set of four excellent Starrett
punches — 1/16”; 3/32”; 1/8”; 5/32”
(STA PNCHSET) ................................................... $22.95
the BushmAster
dVd
• Complete assembly and
buildup details for the
XM15/AR15/M16 rifle
(ADS-002) ...................$25.95
the BushmAster Video (Vhs)
(ADS-001) ......................................................... $21.95
Ar15 multi-tool
• Adjusts front sights
• Cleans bolt faces
• Includes non-mar disassembly punches
for take down and lower receiver pins
• Emergency Phillips screwdriver or scraper
• Lanyard loop to tie it to your web gear or tool bag
(BT-MCT)............................................................. $12.95
(AMER-001) ........................................................ $15.95
receiVer Push Pin tool
• Designed to push out tough takedown and pivot pins in your lower
receiver. Machined from black nylon material so it won’t mar the
gun’s finish.
• Fits into the buttstock storage compartment
(IMP-1)................................................................. $7.50
BushmAster gun cleAning PAd
• Perfect for rifles, shotguns, muzzleloaders — protects your
table and firearms from scratches and spilled cleaning fluids
• Bonded waterproof backing prevents any “soak-through”
• Absorbent, felt-like fabric
• Keeps parts organized and in place
• Durable, stain resistant and long lasting
• No. 1 seller in the country
• Made in USA
(10012)............................................................. $12.95
www.bushmaster.com
57
GunsmithinG accessories
Bushmaster operatinG
& safety manual
• Field stripping, cleaning, maintenance
on all Bushmaster XM15 and Carbon
15 models — with parts diagrams,
safety tips and sight zeroing
(BFIMANA2OP) ...................................................... $2.95
ar15/m16
hanDGuarD tool
(HGD-Tool) ............................. $21.95
• Provides the leverage needed to compress
the weld spring inside the delta ring
• Manufactured from strong, powder
coated, 1/4" round steel stock with
protective vinyl coatings
Bolt carrier carBon scraper
• A sturdy workbench tool for the AR15/M16 gunsmith
• Makes quick work of cleaning out carbon buildup
inside the bolt
• Weight: 1.25 lbs. / Length: 13”
(MBC-02)............................................................ $31.95
heavy Duty comBination
ar15 armorer’s Wrench
• Two-sided wrench at one end fits either multi-point or peg style
barrel nuts on barrels up to 1” in diameter, and a breaker bar or
torque wrench can be fitted into the 1/2” square drive opening
• Other end fits telestock locking nuts, and a large flat screwdriver
blade is also included for use on standard buttstock screws
• Two other slots fit A1 and A2 birdcage flash hiders and receiver
extensions
(1570)............................................................... $22.50
ar15 comBination armorer’s
Wrench for neWer telestocks
• A newer design Armorer’s wrench that fits the latest model
telestocks with the cuts on the locking ring
• Weight: 1.125 lbs / Length: 12.25” overall
(1570-4) ............................................................ $23.50
telestock
tock Wrench for neW
ne
style (riBBeD) telestocks
• An economical tool for the locking nuts on newer-type telestocks
(fixed and collapsible)
(223-telewrench2) ................................................. $6.50
fielD Bolt carrier
carBon scraper
• Tool steel scraper quickly removes carbon buildup
in all AR15/M16 bolt carriers
(BC01) ............................................................... $20.95
firinG pin protrusion GauGe
• Checks firing pins for minimum (.028”) and maximum (.036”)
protrusion
• Weight: 1.125 lbs. / Length: 12.25”
(MMT-0005) ....................................................... $15.95
armorer’s Barrel
Wrench
• For AR15/M16 barrel removal and installation
• Note: Will not fit our DCM profile barrels
(RM-001) ........................................................... $11.95
58
Phone orders: 1.800.998.7928
siGht aDjustment tools
• Adjustment tools for A1 &
A2 front sights, and A1
rear sight
• Machined steel with black
oxide finish — designed to fit in the stow grip or
buttstock compartment
For A1 Rifles (Round Sight Post)
(RAY-006) ............................................................. $8.50
For A2 Rifles (Square Sight Post)
(RAY-005) ............................................................. $8.50
loWer receiver
vise Block
• Clamp it in a vise and its magazine
shape locks into the magazine well of
any AR15/XM15/M16 lower receiver
for assembly or maintenance work
• Machined from high density polyethylene. Use to mount lower receiver
in either upright or inverted position.
• Will not distort receiver or harm its finish. Also available, a
larger version for the Bushmaster 308.
(OM-006) ........................................................... $31.95
(OM-007)(for Bushmaster 308)............................. $37.95
Bushmaster armorer’s action
clamp for all ar15/m16-type rifles
• Works with all AR-Type rifles — even early A1’s and A3 “flattop” uppers with carry handle in place
• Used in conjunction with an Armorer’s barrel wrench, this clamp
eliminates barrel vise jaw blocks for removing or replacing barrel
assemblies, and is necessary when installing tubular aluminum
V Match handguards or competition free-floating tubes. Also
available, a larger Bushmaster .308.
(Upper receiver is not included)
(OM-003) ........................................................... $41.50
(OM-004)(for Bushmaster 308)............................. $53.95
Gunslick® .22/.223 cal.
cleaninG kit
• These quality kits are offered in either .22 caliber
or .30 - .32 caliber versions
(62008-223) ..................................................... $15.95
Gunslick® .308
cal. cleaninG kit
(62014-308) ...................................................... $15.95
Dewey .50 caliBer
two-piece cleaninG roD
• 54” long, two piece rod perfect for the new Bushmaster BA50
.50 BMG cal. rifle
• 44” of coated rod with 5/16 stainless steel extension
• Cleans everything from .35 caliber and up. Supplied with 50-J brass
jag and adapter to accept 8/32 brushes.
(DEWEY-50C54) .................................................. $42.95
Dewey ar15/m16
Breech roD GuiDe
• Guides cleaning rod straight into the barrel from breech end
• O-rings seal off the chamber to prevent any back-flow of cleaning
solvents and debris into the action, trigger and magazine areas
• For barrels 24” and longer, we recommend using a 36” rod
with this rod guide (see Dewey Rod Dewey-22CM-36). Also
available — Dewey .308 breech rod guide.
(Dewey-1000)..................................................... $23.95
safety Block for ar15/m16
rifles anD others
• Molded plastic with the
Bushmaster name
• Cone end inserts into the firing
chamber, handle protrudes to indicate a
safe firearm condition
(SBBFI) ................................................................ $2.50
Dewey coateD roDs
• Top quality one-piece rods featuring an unbreakable ball bearing
handle and a nylon coating to protect rifling and preserve
accuracy
• 8/32 female threaded to accept standard brushes or other
manufacturer’s accessories
• Universal brass patch loop included
Dewey cleaninG roD aDaptor
• A machined brass adaptor threaded (female 8-36 / male 8-32) to
accept the military type cleaning brushes – allowing them to be
used with Dewey and other commercial cleaning rods
(DEWEY-22-M-ADPT) ............................................... $3.25
Dewey 22CF-24” (For barrels to 20”)
(DEWEY-100) ...................................................... $27.95
Dewey 22CF-30” (For barrels to 24”)
(DEWEY-200) ...................................................... $27.95
Dewey 22CF-36” (For barrels longer than 24”)*
(DEWEY-22CM-36) ............................................... $28.95
Dewey Delrin
cleaninG roD
GuiDes
• Maintain the original accuracy of
your rifle by protecting the all
important muzzle of the barrel
*8/32 male threaded with an adapter. Use with a breech rod
guide in barrels 24" or longer.
Models for:
AR15/M16 Post-ban (.700” diam. at muzzle)
(DEWEY-1100)...................................................... $9.95
AR15/M16 Pre-ban (DEWEY-300)............................ $7.95
M1 Garand (DEWEY-400) ........................................ $7.95
M14 & M1A (DEWEY-500)...................................... $7.95
Mini 14 (DEWEY-600) ............................................ $7.95
Mini 30(DEWEY-700) (also fits Bullpup) .................... $7.95
Ruger 10-22 (DEWEY-800)...................................... $7.95
Dewey .308 cleaninG roD
• A 36” long, one piece, .30 cal. nylon coated rod
with jag and brush adapter (12/28 male thread)
• Thick nylon coating protects the bore from
scratches, and ball bearing handle allows the
rod to spin as it tracks the rifling
(DEWEY-30C-36) .................................................. $28.95
www.bushmaster.com
59
the otis .50 cal.
cleaninG system
ystem
• Specifically designed for
all your .50 caliber rifles
and pistols, and fits in a
handy Cordura zippered pouch
• Includes two .50 caliber Memory-Flex cleaning rods, an 8”
length for .50 caliber pistols, and a 40” for .50 caliber rifles,
along with a large heavyweight brass obstruction remover and
a slotted tip
• Weight: 0.735 lbs. / Dimensions: 4” x 4” x 2.5”
(250)................................................................. $51.66
otis buttstock stoWaGe
cleaninG kit
• A 16-piece cleaning kit for
the AR15/M16 packed
in a wedge shaped Cordura
pouch shaped to fit inside
the rifle’s buttstock storage
compartment — lifetime
guaranteed by Otis Technology
• Includes bore and chamber brushes, Memory-Flex rod, doubleend brush, slotted patch tip, patches, NATO adapter, bore light,
chamber rod, T-handle, CLP solvent, and more
(224-2) .............................................................. $46.95
otis tactical cleaninG system
• 23-part weapons maintenance
system cleans all rifles .177 to
50 caliber, shotguns .410 to
10 gauge, and pistols .177
to 45 caliber
• Packed into a zippered,
round, black nylon soft-pak (4" by 2")
• Includes 5 brass bore brushes, 3 forged brass tips, 3 Memory-Flex
rods, T-handle, shotgun adapter, all caliber patches and patch
savers, 1/2 oz. bottle of bore solvent, NATO adaptor for military
brushes and bore reflector/safety flag
(750)................................................................. $47.95
otis technoloGy
Gun cleaninG cD
• All the tips, techniques and information needed to keep any rifle, pistol,
shotgun or black powder piece in
perfectly functioning, spotless condition
— compiled in a handy MiniDisc CD
format
• A full color printed brochure with
highlights from the CD is included; both
are packaged in a ziplock bag – “The
Industry Guide to the Proper Care and
Cleaning of Firearms”
(2001)................................................................. $5.95
60
Phone orders: 1.800.998.7928
hoppe’s
boresnake —
WorlD’s
Fastest Gun bore
cleaner®
• Cleaning system for all .22 caliber centerfire and rimfire rifles
(24011)............................................................. $17.90
5.56mm/.223 rem. caliber
bore & chamber brushes
• High quality tools for barrel cleaning
• 8-36 threads
Chamber Brush
(BR-001) .............................................................. $2.00
Bore Brush
(A190) ................................................................. $1.65
neW .50 bmG cal. cleaninG Gear
Bore Brush
(B-50) .................................................................. $1.95
Chamber Brush
(SB-12) ................................................................ $1.95
Chamber Rod
(EWEY-CHR-50) .................................................... $19.95
Chamber Brush Adapter
(DEWEY-SBA) ......................................................... $2.95
kleenbore bore brushes
• Top quality materials all threaded 8-32 for commercially
available rods
6.8mm /.270 Caliber Bore Brush
(A-179) ................................................................ $1.65
7.62mm /.30 Caliber Bore Brush
(A-180) ................................................................ $1.65
9mm /.38 Caliber Bore Brush
(A-181) ................................................................ $1.65
.44 /.45 Caliber Bore Brush
(A-182) ................................................................ $1.65
neW rem oil 2oz
bottle
• Proven superior for cleaning,
lubricating and corrosion-protecting
fine firearms
• Ideal for all outdoor sports and
marine equipment
(10013) ...................................... $1.94
Gov’t. issue m16 cleaninG Kit
• Kit includes a T-handle, a four-piece rod, swab holder, bore and
chamber brushes
• Will fit in the standard buttstock compartment of the AR15,
XM15 or M16 rifle
• All threading is Military 8-36 threading
Birchwood casey suPer BlacK
touch-uP Pens
• Touch up nicks and scratches on black anodized aluminum and
polished or matte finished alloy gun receivers, trigger guards,
scopes or black painted surfaces — a fast-drying, lead-free
paint with superior adhesion and durability for gunsmithing uses
• The felt tip chisel point touch-up pen holds 1/3 fl. oz.
For Gloss Black Finish
(Gloss-15101) ....................................................... $6.95
For Flat Black Finish
(15102)............................................................... $6.95
(A CLEAN) ........................................................... $10.50
cleaninG Kit case
• New gov’t. issue nylon cases with snaps and Velcro closures
• Great for holding all sorts of small parts and gear
• Available in Olive Drab (PO3030D) or Black
(PO303B) .....................................................$8.95 each
Bushmaster cleaninG Kit comBo
• The 7-piece gov’t. issue cleaning kit packed in a nylon cleaning
case kit
Cleaning Kit in Black Case
(cleankitB) .......................................................... $16.95
Cleaning Kit in Olive Drab Case
(cleankitOD) ........................................................ $16.95
the tetra Gun
cleaninG PacK
A superior firearms maintenance
and preservation system based on a
revolutionary breakthrough in
synthetic polymer technology.
Tetra’s gun cleaning pack contains:
• 1 oz. Tetra Gun lubricant: A synthetic, polymer based lubricant
and conditioner for action and all moving parts
• 1 oz. Tetra Gun grease: Synthetic polymer based white grease for
use on all metal to metal contact surfaces
• 3.75 oz. Tetra Gun spray: Synthetic polymer-based cleaner and light
lubricant — removes dirt, combustion residue, old lubricants and
solvents, and offers corrosion protection
• 4 oz. Tetra copper solvent: Concentrated copper, lead, powder,
and plastic remover. Removes stubborn fouling from barrels and
provides fast, effective cleaning without “barrel etching.”
(5337100802)................................................... $23.50
tetra Gun Grease
1 oz. Tube (5337100005) ..................................... $5.50
tetra Gun oil
the Bushmaster Gun Pad
• Sturdy countertop protector for gunsmithing assembly work, and
it doubles as a computer mouse pad
• This big (18” x 12”) brightly colored pad has crisp images
of Bushmaster rifles, a protective laminate surface, and soft,
non-skid, foam padded backing
1 oz. (5337100006) ........................................... $4.50
4 oz. (5337100303) ........................................... $7.95
8 oz. (5337100304) ......................................... $12.95
tetra Gun sPray cleaner
3.75 oz.(5337100201) ....................................... $7.50
8 oz. (5337100202) ......................................... $11.95
(QP-014) .............................................................. $9.95
www.bushmaster.com
61
tetra FieLD Kit
• All the necessities to keep your gun functioning on the range
or in the field
• Includes: 1 oz. tube Tetra Gun grease and 1 oz. plastic bottle
Tetra Gun oil
(TETRAFIELDKIT) ..................................................... $7.95
tetra Gunsmith’s Kit
• Professional size quantities of high quality Tetra products: Two
1 oz. tubes of Tetra Gun grease / 8 oz. Tetra Gun oil / 8 oz.
Tetra Gun spray
(TETRAKIT) ......................................................... $31.95
tetra Gun BLue & rust remover
• Removes old bluing and rust
quickly and effectively without
damage to base metal — a
necessity before re-bluing or
browning — 3 fl. oz.
(5337100001) .................................................... $5.50
tetra Gun LiquiD
Gun BLue
• A great product for touch-up or complete re-bluing of firearms
(not for aluminum — steel only)
(5337100002) .................................................... $5.50
NOTE: Competition Rifle Parts can be fitted to
standard models as well.
Bushmaster Dcm 1/4 minute
winDaGe comPetition rear
siGht conversion Kit
• Convert your old A2 sight to 1/4 minute of
windage adjustment (MOA) configuration with these
high-quality competition parts
• Kit includes 1/4 MOA. drum, pin, detent springs and balls
(AR 1/4MIN CONVK) ........................................... $21.50
Dcm comPetition Lower
receiver assemBLies:
All include our factory set DCM two-stage competition trigger
comPLete Dcm comPetition
Lower assemBLy
• Lower receiver with A2 buttstock, competition buttstock weight,
pistol grip and two-stage trigger (as shown)
(A LOW STD W/CGWT) M.S.R.P. .......................... $430.00
Dcm Lower assemBLy
• Same assembly as above less buttstock weight
(A LOW STD W/CG) M.S.R.P. .............................. $410.00
tetra Gun coPPer
soLvent
(5337100501) .................................$8.50
cLeaninG Patches
• Bag of 100
• Sized for the AR15/M16 rifle bore
Dcm Lower receiver
assemBLy minus ButtstocK
• Includes pistol grip, DCM two-stage trigger and all internal parts
(as shown above)
(ALOW W/OSTK W/CG) M.S.R.P.......................... $360.00
(923) .................................................................. $5.50
FirePower FP-10 “cLP”
tyPe LuBricant
• A cleaner, lubricant, and preservative for
weapons & weapons systems, Firepower
FP-10 is a semi-synthetic CLP specifically
formulated for the serious shooter, soldier,
law enforcement officer, sportsman
and professional armorer
1 oz. Bottle (FP-10-1) ........................................... $4.25
4 oz. Bottle (FP-10-4) ........................................... $6.50
16 oz. Bottle (FP-10-16) ..................................... $14.95
a2 ButtstocK BaLance weiGht
• Fits snugly in the standard A2 buttstock compartment without
rattle — a 3.62 lb. chunk of lead that can be trimmed to help
achieve a perfectly balanced rifle
• Its wedge shape and rubber pressure pad ensure a tight,
rattle-free fit
(Part # 9349119SW) ......................................... $21.50
comPetition hanDGuarD
BaLance weiGht
• This lead balancing weight fits inside the bottom half of the
standard A2 handguard to add fore-end weight to your competition rifle (a companion to the buttstock weight below)
• Weighs approx. 3.5 lbs. and can be cut down to achieve perfect
balance
(GPSS-HBW) ....................................................... $31.95
62
Phone orders: 1.800.998.7928
comPetition riFLe Parts
Ge
Bushmaster two staGe
comPetition triGGer
shown plus
• Includes all the specially modified parts shown plus
1st Stage and a 1 lb.
• Can be set for a 3 1/2 lb. DCM legal 1st Stage and a 1 lb. lowers
(2nd Stage) letoff. NOTE: This trigger will not fit in Colt lowers with a “block” over the safety, and is not designed to work with large Colt pivot pins
(8448592-SCGK) .............................................. $127.95
Also available: Two-stage Competition Trigger with Bushmaster Ambidextrous Safety
(8448592-SCGKA) ............................................ $148.95
moLy-sLiDe™
LuBricatinG Paste
• A 60% molybdenum disulfide (MoS2) lubricating paste for wear resistance, anti-seizing and anti-galling on cams, bushings and other sliding surfaces
• Has a very wide working temperature range with minimal evaporative loss
• The 1 oz. jar will usually last the average shooter/gunsmith for years
(MS-100) ............................................................ $8.50 Dcm comPetition
a2 uPPer receiver
assemBLy with
“stay straiGht” a2 comPetition
rear siGht
• Includes forward assist, ejection port cover and one competition sight micro-aperture in your choice of four “peep” sizes — please specify size
DCM Upper Receiver Assembly with 1/2 Minute Rear Sight (A2URCG2XR) ................................................... $223.95
DCM Upper Receiver Assembly with 1/4 Minute Rear Sight
A2URCG4XR) .................................................... $223.95
Bushmaster comPetition “stay
straiGht” a2 rear siGht assemBLy
• Highly accurate rear sight assemblies with the new “StayStraight” dual detent mechanism (keeps the sight from moving or canting) for the serious competition shooter
• Elevation and windage mechanisms are available in either 1/2 or 1/4 minute of adjustment
• The flip-up is machined to allow installation of different interchangeable micro-apertures (one aperture included with each complete sight or flip-up assembly) • These precision machined inserts are available in 4 aperture sizes: .036”; .040” Standard (9 out of 10 shooters find the .040” standard aperture works best, your eyes may differ); .046”; or .052”
1/2 MOA Rear Sight with choice of aperture size
(9349072CGA2XR) ............ $122.50
1/4 MOA Rear Sight with choice of aperture size
(9349072CGA4XR) ............ $122.50
Bushmaster Dcm comPetition
uPPer receiver/BarreL assemBLy
• For the serious high power competitor — this upper Assembly includes all the competition modifications needed to win
• Redesigned “Stay-Straight” dual detent rear sight with competition hood
• Assembly includes the matching bolt and bolt carrier
(PURA2B 20CG8XR) .......................................... $790.00
Bushmaster Dcm comPetition
heavy BarreL with Factory
matcheD BoLt anD Front
siGht Base
• A lapped 20” barrel — button rifled in 1 x 8 right hand twist — features an 11° crowned muzzle designed for competition and a custom match hybrid chambering with longer throat, or “leade,” to accommodate 5.56mm ammunition
• Chrome moly-vanadium steel (non chrome-lined) with a manganese phosphate finish
• Diameter from the barrel extension forward to the sight base step is a full 1”. NOTE: Requires assembly by an experienced gunsmith to achieve optimal accuracy.
(9349054-20CGA) ........................................... $313.95
With std. muzzle threading for flash suppressors
(9349054-20CGAPRB) ....................................... $313.95
Note: Assembly by a gunsmith recommended for optimum accuracy.
Bushmaster Dcm “Free-FLoater”
Kit — a BarreL nut/Free-FLoater
tuBe/hanDGuarD comBination
• This fore-end system meets all regulations for DCM competition and free floats the barrel from barrel nut forward for optimum accuracy
• A sling swivel loop is mounted onto the front of the tube — handguards, delta ring, weld spring, snap ring and a special gas tube are included
(9349059CGA) ................................................ $159.95
Dcm Free-FLoater tuBe/
custom Gas tuBe set
• Add your own rifle length handguards to this competition freefloat tube — includes a custom bent gas tube
• Minor modifications to handguards are required for fitting
• Upper receiver disassembly and front sight removal are necessary for assembly onto rifle
• As installed on DCM rifle
(2698823) ....................................................... $132.95
www.bushmaster.com
63
COMPETITION RIFLE PARTS
BuShMASTER
MASTER COMPETITION SIghT
SERvICE TOOL
• A combination front sight adjustment tool and rear shroud insert “screwdriver” machined of steel with black finish and knurled for a non-slip grip
• Length: 2”
(CG-MPT) ........................................................... $10.95 “ThE hOOd KIT”
• Includes our competition flip-up, the hood sight shroud and your choice of one competition aperture; aperture;
numbers below indicate the size of the aperture opening Choose from: .036” (CGF36HK) / .040” (CGF40HK) / .046” (CGF46HK) / .052” (CGF52HK) ................. $40.50
“ThE hOOd”
• A competition rear sight shroud (center in photo above), this tubular, threaded insert for our competition flip-up eliminates all glare and improves your sight picture
• Internally threaded to accept the micro-aperture of your choice
(9349075CGH) .................................................. $15.95
ExTRA COMPETITION
SIghT APERTuRES*
• These thread directly into the flip-up in your competition sight
• Your vision determines which micro-aperture suits you best (most shooters prefer the .040” standard aperture)
Choose from: .036” (CGI36) / .040” Std. (CGI40) / .046” (CGI46) / .052” (CGI52) ...........................................$10.95 ea.
*Any three apertures can be purchased as a set ......... $25.95
A2 COMPETITION “FLIP” SIghT
• Shipped with one micro-aperture
Choose from these 4 Aperture sizes:
.036” (CGF36) / .040” (CGF40) / .046” (CGF46) / .052” (CGF52) ......................... $26.50
SAFETy BLOCK FOR AR15/M16
RIFLES ANd OThERS
• A plastic safety block with Bushmaster name molded in — the cone end is inserted inserted
into firing chamber, and the “handle” end protrudes to show safe condition of rifle
• Bushmaster includes this safety block with every complete rifle sold
• 4-piece set
(SBBFI) ............................................................... $2.50
ShORT
COMPETITION hOOd
• This variation on the competition rear sight shroud above was created to allow shooters who wear glasses to get as close as possible to the rear sight without scratching their glasses
(9349075CGH-S) ............................................... $15.95
ChAMBER ChECKER SAFETy FLAg
• Tough yellow plastic flag slips into the chamber
• Close the bolt, and it clearly shows your rifle’s range-safe status
(CC Chamber Check) .............................................. $2.50
64
Phone orders: 1.800.998.7928
SINgLE-ShOT MAgAzINE FOLLOwER
• A blue plastic follower that installs easily inside most AR-Type .223/5.56mm magazines
• Allows single shot loading of extra long competition handloads that won’t function in regular magazines
• Magazine not included
(SS-FOL) ............................................................. $13.95 SINCLAIR INTERNATIONAL SIghT
ANd MuzzLE COvER SET
• Often seen on the DCM ready line, these popular protective covers are molded from durable bright yellow vinyl to protect “sight zero”
“sight
• To keep dirt out of the muzzle and to offer high visibility
• Set includes front and rear sight covers and two sizes of muzzle guard covers — one for rifles with flash suppressors and another for rifles with plain competition crowned muzzles
(14-200) ........................................................... $14.95
TuRNER
SAddLERy
LEAThER
COMPETITION
SLINg
• National match police tactical rifle sling is premium quality, black, 11 oz. strap leather — 54” in length with numbered holes
• Mil. spec. Parkerized steel hardware and copper rivets
• Keepers are 7/8” wide and hand stitched
(TS-NMPTRS) ...................................................... $52.95
CREEdMOOR dELuxE SERvICE RIFLE
ShOOTINg STOOL
• Custom sewn by Creedmoor for Bushmaster of red Cordura with black webbing and the Bushmaster snake logo
• Carry all your “necessaries” in the handy hanging compartmentalized bag — accessible through half moon YKK zippered openings on both sides
• Carry up to four AR-15 magazines in the outside pouches — protected from dirt and rain with a Velcro flap
• A zippered pocket above the magazine pouch accommodates your score book, and large outside pockets on three other sides offer huge storage capacity
• Carrying bag is 12.5” tall x 11” wide x 12.5” deep, and overall weight is only 6 lbs.
CREEdMOOR
dELuxE CART
CONvERSION kIT
• A quality kit that attaches to the Creedmoor deluxe shooting stool (below, left) to add easy rolling portability and a compact size when folded down
• Machined from 3/8” bar stock aluminum and the finest heavy duty hardware and wheels
• Folds down in seconds for car trunk stowage, or disassembles easily to fit in a standard suitcase as the longest piece is only 23”
(BFI-Cartcon) .................................................... $124.95 CREEdMOOR ShOOTINg
EquIPMENT RAIN COvER
• This cover was designed so the competitor can saddle his rifle and gear on the shooting stool (below, left) for protection against the nastiest weather or potential tampering
• Black nylon pack cloth, it can be secured with its own strap around a shooting stool • Weight: 2 lbs.
(BFI-N045) ........................................................ $29.95
ShOOTINg STOOL ShOuLdER
STRAP
• A convenient, 1.5” wide black polypropylene webbing shoulder carrying strap for the Creedmoor shooting stool
• Weight: 1 lb.
(BFI-N026) .......................................................... $5.95
CREEdMOOR RIFLE dATA SCORE BOOk
• Essential data is arranged in a simple check off format with enlarged target overlays (double overlays for 200 and 300 yard rapid fire stages) • Ample pages for 200/300/600 and 1000 yard shooting — in a convenient 8.5” x 5.5” spiral bound format
(BFI-N075) .......................................................... $8.95 (BFI-N051) ........................................................ $69.95 www.bushmaster.com
65
COMPETITION RIFLE PARTS
CREEdMOOR
BuShMASTER ROLL-uP
ShOOTINg MAT
• A popular — and necessary — part of high power competition gear, is this rollup shooting mat done in Bushmaster colors by Creedmoor Sports
• Features a waterproof vinyl bottom in Bushmaster black, and Cordura nylon top in Bushmaster red with our snake logo embroidered on for maximum visibility • Oversize textured rubber elbow pads
• Mat rolls up for convenient storage and carry
• Dimensions are 29.5” wide x 68” long, and weight is approx. 8 lbs.
(BFI-N040) ........................................................ $79.95
CREEdMOOR BuShMASTER
hARd BACk hEAvy CORduRA
ShOOTINg COAT
• Creedmoor Sports’ most popular shooting jacket, sewn in Bushmaster’s red & black colors of heavy Cordura material — ideal for high power or smallbore competition shooting
• A stiff interior center back panel of heavy cotton canvas gives it the “hard-back” name and provides maximum back support for the standing position
• Custom sewn to fit the individual shooter (male or female) and is available in sizes 34 thru 48 — for the right- or left-handed competitor
• To achieve an exact fit, Bushmaster sales Bushmaster sales
people will refer you to Creedmoor’s Creedmoor’s
expert tailoring staff who will guide guide
you through the fitting process process
• Choose from standard or tapered tapered
cut, and you’ll have to provide exact measurements around your chest (under armpits) and around stomach (widest point) • Specific alterations to achieve length
perfect sleeve and body length Creedmoor
should be discussed with Creedmoor
$310.95 ....................................................(BFI-N002) (BFI-N002)
For extra large sizes (50 - 52 - 54) Add $20.00
A1 ROuNd FRONT SIghT POST
• Original M16A1 round post
(8448572) ........................................................... $3.95
66
Phone orders: 1.800.998.7928
A1 REAR SIghT ASSEMBLy
(A1 RSITE ASSY) ....................... $12.95
• The original M16A1 configuration — adjustable with A1 sight tool or bullet tip
A1 Sight Aperture (8448539) .......................................................... $6.50
A1 Windage Screw (8448534) .......................................................... $3.15
A1 Windage Drum (8448535) .......................................................... $3.15
Rear Sight Flat Blade Spring
(8448536) .......................................................... $ .55
A1 Windage Drum Detente (8448537) .......................................................... $ .55
A1 Windage Drum Roll Pin (MS16562-96) .................................................... $ .55
A1 Drum Detente Spring
(8448538) .......................................................... $ .55
AdjuSTMENT kNOB FOR
A1 REAR SIghT
• Knob converts the A1 rear sight to the latest M16A1E1 configuration
• Phosphate finished steel knob is knurled for quick adjustment (no sight tool needed) and more precise half-click calibration (LMT-001K) .......................................................... $9.95 COMPLETE A1 REAR SIghT
ASSEMBLy wITh OuR A1
AdjuSTMENT kNOB
• Includes knob, A1 sight aperture, A1 windage screw, flat spring, ball, spring and roll pin
(A1-RSIGHT-KIT) .................................................. $14.95
COMPLETE REAR
SIghT ASSEMBLIES
• Latest M16A2 design with dual apertures with knob adjustment for elevation and windage. Dial in targets out to 800 meters in 100-meter increments. Manganese phosphate finish steel.
A2-RSIGHT-KIT
(AR A2 RSA) ....................................................... $53.50
A3 Rear Sight Assembly
(AR A3 RSA) ....................................................... $53.50
1/2 MOA rear sight assembly for the A3 removable carry handle
(adjusts out to 600 meters) SIGHTS/SCOPES/MOUNTS
WILLIAMS FIRE SIGHT FOR AR15/M16
• This front sight design incorporates a light gathering element (the tubular piece that mounts along front edge of the AR sight base) for low light situations • The assembly is elevation adjustable, and all sight pieces are CNC machined of black finished aluminum
• No drilling or tapping is required for installation on your front sight base
(9349054FSB-WFS) ........................................... $42.50
Front Sight Replacement/Repair Parts
Front Sight Detent
(8448573) .......................................................... $1.50
Front Sight Detent Spring
(8448574) ...........................................................$ .85
Front Sight Taper Pin
(9349054BTP) ..................................................... $1.00
Rear Sight Replacement/Repair Parts
Rear Sight Elevation Index
(9349066) .......................................................... $7.50
Rear Sight Elevation Index Screw
(9349065) ......................................................... $1.00
Rear Sight Elevation Knob
(9349067) .......................................................... $6.50
Rear Sight Elevation Spring
(9349070) ......................................................... $2.25
Rear Sight Elevation Spring Pin
(MS16562-121) ...................................................$ .55
Rear Sight Helical Spring
(9349069) ............................................. [3 req’d] $ .55
Rear Sight Ball Bearing
(MS19060-4808) ................................... [3 req’d] $ .55
Rear Sight Windage Knob
(9349077) .......................................................... $6.50
Rear Sight Windage Screw
(9349076) .......................................................... $4.50
Rear Sight Windage Knob Pin
(MS16562-98) .................................................... $ .55
Rear Sight Flat Blade Spring
(8448536) ........................................................... $ .55
Rear Sight Flip-up Aperture
(9349075) .......................................................... $8.50
Rear Sight Base
(9349074) ........................................................ $23.50
TRIjICON LUMINOUS
TRITIUM FRONT
SIGHT POST
• AR-Type front sight post is functionally identical to the standard front sight post and fits either A1 or A2 models and includes sight tool
• Illumination from the tritium inserts are guaranteed for 10 years by Trijicon (CP-25F) ............................................................ $57.95
TRIjICON REAR SIGHT APERTURE
• An effective ghost ring style flip-up aperture for the AR
• Houses two tritium inserts in the larger aperture
(CP-25R) ........................................................... $38.00
TRIjICON TRITIUM SIGHT SET
• Both front and rear sights (as shown above), plus front sight detent and A1/A2 sight adjustment tool
(CP-25) ............................................................. $89.95
TRIjICON TA51 MOUNT FOR ACOG
• Knurled thumbnuts allow quick installation/removal on mil. spec.
• Picatinny rail flat-tops
• The ACOG scope mounts into this with two screws — use Loctite to keep it from “shooting loose”
(TA51) ............................................................... $84.95
KNS PRECISION FRONT SIGHTS
• Quality replacement front sights for the AR15/M16 offering .010 diam. crosshair wires for a precise sight picture and hooding for reduced glare
• Tactical Model dual range sight (below) offers an adjustable elevation dot for close range targets below the long range crosshairs
A. Standard Model
(KNS1) .............................................................. $37.95
B. Wide Hood Model
(KNS2) .............................................................. $37.95
C. Tactical Model
(KNS3) .............................................................. $52.95
A
B
C
www.bushmaster.com
67
SIGHTS/SCOPES/MOUNTS
A2 SqUArE FrONT SIGHT POST
• Standard M16A2 steel square post design
(9349056) ........................................................... $5.50
A2 FrONT SIGHT POST
FOr FlAT-TOP COlTS
• Colt A3 removable carry handle sights are taller than A1& A2 rear sights, and require an .040” taller front sight post • Also for use with swan sleeves & A.R.M.S. #40 sight
A.r.M.S.
.M.S. #22M68
CANTIlEvEr ExTENSION
• Designed to align the Aimpoint® CompM3 sight with the 3XMag module when used with the A.R.M.S. #22M68 ring mount (below, left). Low std. height allows perfect red dot co-witnessing on M16/M4 models
• Machined steel with gray phosphate finish
(1137) .............................................................. $35.00
(9349056-M) ...................................................... $5.50
AlUMINUM
UMINUM SCOPE MOUNT
• Anodized, machined aluminum, “see-through” Picatinny rail mount (Weaver also) which allows use of existing iron sights
• Attaches to the carry handle with a thumbnut
(RAY-002) .......................................................... $21.95
A.r.M.S. #22M68 rING MOUNT
FOr AIMPOINT® COMPM3
• A rugged A.R.M.S. mount designed with a wide clamping cradle for the CompM3
• It features a single A.R.M.S. quick throw lever locking system to guarantee repeat zero on any Picatinny rail — solid, quick, easy to mount or remove
• The “no-mar”pad built into the throw lever protects the Picatinny rail’s edges and the mount’s two pieces can be separated for use with the cantilever spacer (above right) to match the CompM3 with the 3XMag module (opposite page)
(10950) .......................................................... $138.00
AIMPOINT
IMPOINT® COMPM3 SIGHT
The Aimpoint® Comp3 Passive red dot collimator reflex sight offers capabilities not found in other sighting systems Features include: • Compatibility with every generation of NVD • ACET technology allowing 50,000 hours of operation on one single battery (on setting 7 of 10; Battery Type: 3 volt lithium battery included, type 2L76 or L1/3N) • 500,000 hours of use on NVD setting
• Magnification 1X; Reticle Size: 2 MOA • Unequalled light transmission • Submersible to 45 meters (135 feet)
• Replaceable outer black rubber cover offering protection and an additional stealth factor • Rugged, durable construction unaffected by extreme weather conditions • Unlimited field of view, unlimited eye relief, parallax-free • No laser emissions that could be harmful to your eyes • Mechanical switch for speed and reliability
• Increased aiming confidence • Reduced training time and ammunition • Switch-dot brightness: 10 settings — 4 NVD, 6 daylight • Body: Extruded, high strength aluminum, hard anodized with dark graphite gray non-glare finish • Lens covers of black, non-glare thermoplastic elastomer • Adjustments: 1 click = 10 mm at 80 meters = 13 mm at 100 meters = 1⁄2” at 100 yds • Length: 130 mm (5.1” ); Width/Height: 55 mm x 55 mm (2.2” x 2.2”); Weight – includes lens covers and protective rubber shroud: 270 grams (9.5 oz.)
(11408) .......................................................... $556.00
68
Phone orders: 1.800.998.7928
AIMPOINT® SRP-M QUICk DETACH
MOUNT fOR COMP M3 SIGHT
• A solid, simple 30mm wide-ring high
mount with a large knurled thumbnut
for easy on/easy off attachment to
any MIL-STD 1913 Picatinny rail
• Optical center over the top of the
Picatinny rail is 26.1mm (+/- 0.1
mm) — may require a riser block for
sighting over a standard AR front sight
(10830) ............................................................ $29.00
AIMPOINT® 3XMAG
MAGNIfyING MODUlE
• Compatible with the CompM3 Sight for maximum
flexibility in the field
• When combined with Aimpoint’s patented TwistMount the
3XMag offers the ability to jump from CQB (Close Quarters
Battle) to semi-sniping and vice versa
• Hunters can rapidly switch from non-magnifying to magnifying
while still being able to keep their Aimpoint® sight on the
firearm
• The versatile 3XMag can also be used as a handheld magnifying
monocular for discrete observation and identification
Unique features include:
• Mounts on rail system behind Aimpoint® sights with Aimpoint®
TwistMount or a regular 30mm ring
• Provides extended range to the operator
• No influence on point of impact, no need for re-zeroing the sight
• Eye relief at 5° FOV 40–90 mm; at full FOV 60–65 mm
• Length: 110 mm (4.3”); Width/Height: 44x41 mm (1.7” x
1.6”); Weight: 200 g (7.1 oz.)
• Body’s bottom surface has 4 screw holes for other mounting
alternatives
• Body: Anodized aluminum, dark gray, rubber covered
SPACER fOR AIMPOINT
IMPOINT®
TwISTMOUNT
• A companion piece to the
TwistMount designed for
“co-witnessing” between 3X magnifier and CompM3 on same
plane rails
• It raises the 3XMag in the TwistMount to match the height of
the CompM3
(10566) ............................................................ $11.00
lEUPOlD® MARk 4® 4.5-14 X 50MM
lR/T (lONG RANGE/TACTICAl)
ANGE/TACTICA
/T
/TACTICA
l)
M1 SCOPE
• Leupold® Mark 4® long range/
tactical riflescopes are some of
the most dependable, highest
performing riflescopes you’ll
find anywhere
• The Leupold® Index Matched Lens System® delivers
unsurpassed sharpness across the visual field, brightness, and
contrast for excellent target definition, even in low light
• Side focus parallax adjustment offers fast, easy parallax focusing
from 75 yards to infinity — from any shooting position
• Finger-adjustable 1/4 MOA windage and elevation adjustments are
clearly defined with audible, tactile clicks
• Once sighted in, adjustment knobs can be zeroed
• The Leupold® Mark 4® LR/T® is available with either the mil
dot or Duplex® reticle
• The mil dot reticle provides accuracy of range estimation for
hunters and target shooters
• 30mm maintube offers incredible strength and allows for the greater
range of windage and elevation adjustment
• Flip-open lens covers are standard issue with each Mark 4® LR/T
• Weight: 22 oz.; Overall length: 12.5”; FOV @ 100 yds.: 19’
LEUPOLD® Mark 4® 4.5-14 X 50mm LR/T
M1 Scope w. Duplex Reticle
(54660) ....................................................... $1,219.99
LEUPOLD® Mark 4® 4.5-14 X 50mm LR/T M1
Scope w. Mil Dot Reticle
(54560) ....................................................... $1,374.99
(11324) .......................................................... $535.00
AIMPOINT® TwISTMOUNT
fOR 3X MAGNIfER
• The recommended mount for the
3XMag is this Aimpoint® TwistMount —
allows for quick attachment and
detachment
• Fits any MIL-STD 1913 Picatinny rail
(11355) .......................................................... $164.00
lEUPOlD® MARk 4®
STEEl SCOPE RINGS
• Rugged, solid steel construction,
and highly recoil resistant
• Mount easily onto any Picatinny rail
• Sold per pair
Leupold® Mark 4® 30mm Scope Rings — Medium Height
(61049) .......................................................... $185.00
Leupold® Mark 4® 30mm Scope Rings — High Height
(60699) .......................................................... $185.00
www.bushmaster.com
69
LEUPOLD® Mark
4® FIxED 16 POwEr
SCOPE 16 x 40MM Lr/T (LONG raNGE/
TaCTICaL) M1 rIFLESCOPE wITH MIL
DOT rETICLE
• Incredibly rugged, absolutely waterproof
• The Multicoat 4® lens system delivers extreme clarity from edge to edge of the visual field, outstanding contrast, and a bright sight picture even in extreme low-light conditions
• Side focus parallax adjustment for fast, easy parallax focusing from 50 yards to infinity, from any shooting position
• Finger-adjustable ¼ MOA windage and elevation adjustments with audible, tactile clicks
• Once sighted in adjustment knobs can be zeroed
• Available with the mil dot reticle to provide accuracy of range estimation for hunters and target shooters
• The 30mm maintube offers incredible strength and allows for the greater range of windage and elevation adjustment (140 MOA of elevation adjustment and 45 MOA of windage adjustment)
• Flip-open lens covers are standard issue with each Mark 4® LR/T riflescope
• Rugged and absolutely waterproof, these LR/T riflescopes helped to set the Leupold® Mark 4® standards and can withstand incredible abuse
• Weight: 22.5 oz.; Overall length: 13.1”; FOV @ 100 yds.: 6.8’. Finished in matte black
(50541) ....................................................... $1,874.99
MODEL G23
• Fixed 3X magnification
• FTS (flip-to-side) mount offers shooter instant transition from 3X to 1X situation
• Mount consists of an A.R.M.S.® quick release throw lever to rapidly remove/attach system to rail
• Designed to work with all EOTech HWS models. Product includes a 7mm spacer to include for all side button or throw lever HWS products
• Ambidextrous mount accommodates both left- and right-handed shooters
• Optic includes internal adjustments to properly center the HWS reticle in the 3X sight picture
• Rubber overmold protects optic from damage
(EOT-G23) ........................................................ $589.00
MODEL xPS2-BLk
• Single transverse CR123 battery to reduce sight length
• Shortened base only requires 2.75” of rail space
• Rail space is gained by hovering the battery compartment over delta ring of rifle
• Average battery life at brightness level 12 is roughly 600 hours
• 20 brightness settings to accommodate low to bright situations
• Submersible to 10 ft. depth
• Black anodized finish
• Better sealing is achieved via a threaded battery cap and o-ring design
• Rugged aluminum hood designed to protect optics from damage
(EOT-XPS2) ...................................................... $519.00
MODEL xPS2-aTaCS
• Single transverse CR123 battery to reduce sight length
• Rail space is gained by hovering the battery compartment over delta ring of rifle
• Average battery life at brightness level 12 is roughly 600 hours.
• A-TACS® (Advanced Tactical Concealment System) pattern
(EOT-XPS2-ATAC) ............................................... $549.00
MODEL 512
• Powered by (2) AA alkaline/lithium/
rechargeable batteries • Tool-less mounting via hex bolt or thumb screw • Adaptable to either 1” Weaver or MIL-STD 1913 rails
• Average battery life at brightness level 12 is roughly 600 hours with alkaline and 1,000 with lithium
(EOT-512) ........................................................ $439.00
70
Phone orders: 1.800.998.7928
MODEL EXPS3-BLK
• Single transverse CR123 battery to
reduce sight length
• Includes an adjustable quick release
throw lever for easy removal/
attachment that is designed to accommodate all rail tolerances
• Left side button position allows NV or magnification to be mounted
directly behind HWS
• 20 brightness settings to accommodate low to bright situations; 10
additional night vision compatible settings
• Shortened base only requires 2.75” of rail space.
• Better sealing is achieved via a threaded battery cap
and o-ring design
• Rail space is gained by hovering the battery compartment over
delta ring of rifle
• 7mm raised base providing iron sight access in the lower
1/3 of window
(EOT-EXPS3) ..................................................... $639.00
MODEL EXPS3 ATAC
• Single transverse CR123 battery to
reduce sight length
• Includes an adjustable quick release
throw lever for easy removal/attachment that is designed to
accommodate all rail tolerances
• Left side button position allows NV or magnification to be mounted
directly behind HWS
• 20 brightness settings to accommodate low to bright situations; 10
additional night vision compatible settings
• A-TACS (Advanced Tactical Concealment System) pattern
• 7mm raised base providing iron sight access in the lower
1/3 of window
• Rail space is gained by hovering the battery compartment over
delta ring of rifle
TrIjICON® rEfLEX
rX30-23 — 6.5 MOA
AMBEr DOT AND
42MM OBjECTIvE
Trijicon’s technologically advanced reflex sights offer shooters the
perfect combination of speed and precision under virtually any
lighting conditions. The Trijicon advantage includes:
• A bright aiming point in low light, no light or bright light
• Quick target acquisition and pinpoint accuracy
• Big sight picture and realistic color
• Built to be tough
• Designed for “both-eyes-open” shooting
(RX30-23) ....................................................... $638.00
TrIjICON® rMr™ DUAL
ILLUMINATED SIGHT —
7.0 MOA AMBEr DOT w/
rM34 PICATINNy
rAIL MOUNT
Developed to improve precision and accuracy with any style or caliber of weapon, the Trijicon® RMR™ (Ruggedized Miniature Reflex)
is designed to be as durable as the legendary ACOG®. The RM0434 is a battery-free sight, featuring Trijicon® fiber optics and tritium.
Housed in rugged forged aluminum, the RMR™ is extremely tough
yet lightweight. New easy-to-use adjusters with audible clicks allow
for quick windage and elevation adjustments. The new Trijicon®
RMR™ is tougher than any alternative and suitable for military, law
enforcement and hunting applications.
(RMO4-34) ...................................................... $572.00
3X30 TrIjICON®
ACOG® wITH
AMBEr CHEvrON
rETICLE
The new 3x30mm model is designed for law enforcement and
military applications where the combination of ample magnification,
low light capability and long eye relief make the TA33 the Trijicon®
ACOG® of choice. The TA33-8 3x30 ACOG® Scope features Dual
Illumination amber Chevron .223 ballistic reticle.
(TA33-8) ....................................................... $1,173.00
(EOT-EXPS3-ATAC) ............................................. $669.00
www.bushmaster.com
71
4x32 TrIjICON®
ACOG® ArMy rIfLE
COMbAT OPTIC
(rCO) wITH rED
DUAL ILLUMINATED
rETICLE
No tools are needed for windage and elevation adjustments because the RCO-M150CP features external windage and elevation adjusters, making it waterproof up to 11m without caps. (TA31RC0-M15OCP) ....................................... $1,581.00
SIMMONS
AETEC®
MASTEr
SErIES™ 2.8–10 x 44MM SCOPE
• Simmons’ new Master Series™ AETEC® is one of the most innovative, high performance scopes ever designed • Featuring Simmons’ patented TrueZero™ flex erector system and new windage and elevation dials, the new AETEC® delivers remarkably consistent shot placement and precise MOA adjustments throughout the entire range
• Add Simmons’ new QTA™ (Quick Target Acquisition) eyepiece, which delivers a constant minimum 3.5 inches of eye relief and one of the most generous eye boxes in the industry, and you’ll have the confidence to know that your AETEC® will get the job done from shot to shot and season to season
• The aspherical lens system found on this quality scope was first used on expensive binoculars and cameras
• True one-piece tube construction is utilized
• It is waterproof, fog proof and weatherproof, has SureGrip™ rubber coated adjusting knobs, and HydroShield™ water and condensation resistant lens coatings Innovations to the Simmons AETEC® scope include:
• Simmons’ exclusive true one-piece tube construction for increased mounting area
• Aspherical lens technology and fully multi-coated optics for the brightest, sharpest image in its class
• HydroShield™ lens coating helps maintain a clear sight picture — regardless of weather conditions
• New SureGrip™ rubber surfaces on all eyepieces and side-focus parallax adjustments make the AETEC® one of the easiest scopes to adjust in the field
(2101) ............................................................ $189.95
TrIjICON
ICON® ACCUPOINT® — 5-20x50
VArIAbLE
MIL-DOT
IAbLE POwEr, M
CrOSSHAIr
OSSHAI wITH AMbEr DOT
Trijicon’s longest-range scope ever, it gives tactical shooters, varmint hunters and law enforcement snipers the ability to accurately extend their range in any light.
• Advanced fiber-optics and tritium aiming-point illumination speeds target acquisition and extends available shooting hours
• Dual-illumination system automatically adjusts aiming-point brightness to existing lighting conditions
• Manual brightness override allows shooters to easily adjust the reticle to suit their preferences
• 30mm tube offers a greater range of mounting options
• Rugged, aircraft-quality, hard-anodized aluminum body offers all- weather protection
• Unmatched long eye relief protects against the recoil of higher caliber rifles
• Easy-to-use external turret controls for windage and elevation adjustment
• Side parallax adjuster for enhanced accuracy at long range
(TR23-2) ....................................................... $1,224.00
MEPrOLIGHT® M-21
DAy/NIGHT
ILLUMINATED rEfLEx SIGHT
• The right solution for military, police and sportsmen when rugged construction and reliability count
• The Mepro 21 is a maintenance free, dual illuminated, red dot reflex sight especially designed for quick and instinctive accurate shooting — perfect while on the move in close quarters where the use of both eyes is critical
• The Mepro 21 provides instant, all light aiming without batteries • Illumination for the aiming point comes from a fiber optic collector in daylight situations and from a miniature, self-powered tritium light source at night
• Mounting on your weapon is easy with dual quick release levers offering solid attachment onto any Picatinny rail
• Weight: 13.23 oz.; Length: 4.53”; Width: 1.65”; Height: 2.13”
• Available in two different reticle patterns
MeproLight® M-21 Day/Night Illuminated Reflex Sight with Bulls Eye Reticle
(ML96630) ...................................................... $580.00
MeproLight® M-21 Day/Night Illuminated Reflex Sight with Open X Reticle
(ML96730) ...................................................... $580.00
72
Phone orders: 1.800.998.7928
aLUMINUM SCOPE rING SETS
• Top quality, matte black finished ring sets to fit any Picatinny rail.
U.S.A. made – heat treated aluminum with 8-32 socket head
screws in 1” low, medium or high profile horizontally split design
• 30mm style is vertically split
• Wrench included with each set
Specify:
1” Low
(W-20524) ............................................$15.95 per pair
1” Medium
(W-20515) ............................................ $15.95 per pair
1” High
(W-20525) ............................................ $15.95 per pair
30mm Medium
(W-20513) ............................................ $15.95 per pair
LEaTHErwOOd
CaMPUTEr M-1000
2.5X—10X a.r.T.
(aUTOMaTIC raNGING
& TrajECTOry) rIfLESCOPE
• Adaptable to a variety of calibers from .223 to .50 BMG
• All the shooter needs to do is place the reticle on the target,
zoom in to “frame” an area of known size (i.e. the 18”
height of a buck’s chest cavity), aim, and squeeze the trigger
• The M-1000 features multi-dial rings for up to 4 different zeroes, a new Picatinny mount with built-in windage adjustment,
and a “no math” mil dot reticle
• Construction is of quality optical glass, aircraft aluminum with
clear control knob increment markings, and a non-reflective
finish
(LW-44) ........................................................... $459.00
LEaTHErwOOd M-1200
6-24X50MM CaMPUTEr arT
rIfLESCOPE fOr .308–.50 BMG
• For ranges from 300 to 1200 meters (200m range setting
also provided)
• 50mm adjustable objective — “no math” mil dot reticle —
air-to-glass surfaces are fully multi-coated for brilliant high
resolution; adjustments are tactical-type with 1/8 minute clicks
• Includes rings and a clamp-on flat-top mount for Picatinny and
Weaver rails
(LW-50) ........................................................... $599.00
LEaTHErwOOd HI-LUX
30MM rEd dOT SIGHT
• This compact red dot sight for 5.56mm/
.223 Rem. caliber and other Picatinny or
Weaver rail applications was designed to
offer quick target acquisition and easy “two-eyes-open” shooting
• The non-magnifying Leatherwood Hi-Lux 30mm red dot features
a 1 MOA dot, highest quality optical glass, elevation and
windage adjustments,heavy aircraft aluminum construction, and
a matte black, non-reflective finish
• The brightness of the red sighting dot is controlled by an
11-position rheostat on the top of the sight with clearly marked
increments on the control knob
• Long-lasting 3 volt type ECR2032 lithium battery
• Ribbed rubber rings protect the sight body against knocks and
drops, and mounting on your rifle’s Picatinny/Weaver rail is
made simple with the two knurled thumbnuts on the sight’s
integral base
• Limited lifetime warranty
(LW-RD30) ......................................................... $83.95
a.r.M.S.® #22
THrOw LEvEr
rINGS
• Patented 30mm steel rings
secured with A.R.M.S.®
dovetail system to an extruded
aluminum platform
• “No-Mar” pads protect the rail and spring loaded levers act as
shock absorbers — guaranteed repeat zero hold
LEaTHErwOOd
HI-LUX 50MM rEd dOT
rIfLE SIGHT
• This larger Leatherwood red dot sight
offers a 50mm viewing area with an 88 foot
field of view at 100 yards
• An integral Picatinny-type rail mount with large
thumb screw clamp nuts makes installation/removal easy and
offers excellent repeat zero
• 1 MOA red dot system is powered by an ECR2032 lithium
battery (included)
• Dot brightness is controlled by a 12-step rotating switch;
windage and elevation adjustments are built in and covered by
protective caps
• Limited lifetime warranty
Available in three heights:
(LW-RD) ........................................................... $105.95
(ARMS 37) ......................................................... $29.00
Low: 1/4” rise (ARMS 22L); Medium: 1/2” rise (ARMS
22M); High: 3/4” rise (ARMS 22H) .......$123.50 per pair
a.r.M.S.® #37 rING INSErTS
• Steel inserts that allow use of 1” diameter scopes within 30mm
ring sets
www.bushmaster.com
73
SIGHtS/ScopeS/MountS
A.R.M.S.® #19 weAveR/StAnAG
tHRow leveR Mount
• Mount scopes, sights, etc. directly onto the A3 flat-top receiver with guaranteed repeat zero or, with an A.R.M.S.® #2 carry handle mount, interfaces to M16A1/A2/M4
(ARMS 19) ....................................................... $159.95
A.R.M.S.® #19A tHRow leveR
cHAnnel Mount foR AcoG SIGHtS
• The “channel” mounts Trijicon® ACOG® scopes to mil. spec. Picatinny/Weaver rails with convenient A.R.M.S.® repeat zero throw levers (positioned on left side so as not to obstruct the rifle’s ejection port)
(ARMS 19 A) (ARMS
19 A) .................................................... $170.00
A.R.M.S.® #40l low
pRofIle flIp-up ReAR SIGHt
• A design improvement on the A.R.M.S.® #40 (below), this sight achieves a super low profile (.610 height when folded) and uses the same rugged lock down quick release lever and “no knockdown” stainless steel retention spring
• A unique “sandwiched” dual aperture flip-up combines a stationary close combat aperture and a 300-meter long distance accuracy aperture
• The automatic zero stainless steel retention plate and clamping bar/pin won’t rust; other parts are matte black finished
• This sight includes a newly designed, miniaturized windage adjustment knob, will fit any mil. spec. flat-top Picatinny rail, and is as robust as the rest of the A.R.M.S.® #40 series
• It carries U.S. Pat. No. 5,533,292
Note: This sight is designed to work in conjunction with the A.R.M.S.® SIR system fore-ends in our Handguards section. Due to the aperture height on this sight, you should order the .040 taller front sight post.
(ARMS 40L) ..................................................... $119.95
A.R.M.S.® #2 Scope Mount
foR M16 A1/A2
• An excellent handle mount type scope platform for the AR15/
M16 rifles featuring the Swan universal mounting platform which accepts most all current military and police sighting systems, including NATO Stanag and Weaver-type rails, without the need for adaptors
• Other features include: see-through channel for iron sight use; fast positioning with fixed toggle bolt; self-locking thumbnut, will not loosen; repeatable zero hold
(5855-01-299-777) ........................................... $68.95
A.R.M.S.® #5 MultIBASe
• A quick detach, multiple eye relief mount featuring a spring loaded clamping bar and NATO Stanag & Weaver rail fastening
• Easily mounts to Picatinny/Weaver-type rail or flat-top receiver with locking, captivated thumbnuts
(ARMS 5) ........................................................... $68.95
74
Phone orders: 1.800.998.7928
A.R.M.S.® #40 StAndARd A2 flIpup ReAR SIGHt
• This U.S. patented flip-up rear sight locks down with a quick release lever when not in use (shown in both deployed and lock-down positions)
• Its flip-up combines a 250-300 meter close combat aperture and a 500-600 meter aperture with a horizon line feature that helps lead distant targets
• The automatic zero stainless steel retention plate and clamping bar/pin won’t rust; all other parts are matte black finished; fits any mil. spec. flat-top Picatinny rail
• This sight includes a newly designed, non-protruding, windage adjustment knob
• Due to the aperture height on this sight, you should order the .040 taller front sight post Note: This sight is designed to work in conjunction with the A.R.M.S. SIR system fore-ends shown in our Handguards section
(ARMS 40) ....................................................... $116.95
a.r.M.S.® FOldING FrONT SIGHTS
• Solves the problem of trying to fold the well-known triangle shape of the conventional non folding front sights • Barrel mounted in place • Utilizes a rugged spring loaded angled support system to eliminate getting caught up in brush and other combat hazards • Also uses the standard front sight post
(ARMS 41-B) .................................................... $147.50
(ARMS 41-BL) Includes Lug ................................ $153.50
a.r.M.S.® #39a2 BI-lEvEl raIl
• Mounts to M16A1 & A2 carry handle for multiple combinations of attachments and provides rigid support of the dovetail platform that is extended over the handguards
• A “brush breaker” on the front will prevent branches from snagging under the rail, and a “see-through” channel in the #39A2 upper rail allows the use of existing iron sights.
Note: This rail system will NOT mount on the A3 removable carry handle
B.M.a.S. FOldING FrONT SIGHT/
GaS BlOCk
• An all steel gas block/folding front sight combination easily actuated with the push of a button ; locks in the deployed position, it includes a standard AR front sight post, detent and detent spring, and is the same weight as a standard AR sight tower
• Split design allows it to be mounted onto barrels that already have pinned or welded muzzle brakes or suppressors; attaches easily with 4 cap screws (use of Loctite is recommended)
• Includes bayonet lug and sling loop; manganese phosphate finished for protection, it is shown flipped up in the foreground and folded in the shadowed image (above)
• This unit fits all standard AR15-Type barrels with a .750” diameter at gas port
(YHM-9394) ...................................................... $91.95 (ARMS 39) ....................................................... $148.95 BUSHMaSTEr® MOdUlar aCCESSOrIES SySTEM dETaCHaBlE FrONT FlIP
SIGHT aNd THrEE-raIl GaS BlOCk
• The B.M.A.S. Detachable Front Flip Sight (patent pending) clamps snugly on the gas block’s top Picatinny rail with socket head screws for repeat zero every time • Machined from aircraft aluminum billet, it locks up or flips down at the touch of a button. Standard A2 front sight post with spring and detent locking system offers elevation zeroing just as with the original M16A2 sight.
• The B.M.A.S. Three-Rail Gas Block can be ordered on new barrels as a factory installed option, or we can factory retrofit existing sight bases on .750” or .625” diameter barrels • Its three rails are in standard Picatinny configuration to allow addition of flashlight or laser as side-mounted accessories. • The B.M.A.S. Three Rail Gas Block is precision milled from alloy steel, finished in black manganese phosphate, and drilled and tapped on the bottom for the addition of a sling swivel stud (Note: this stud is not intended as a bipod mount)
B.M.A.S. Detachable Front Flip-Up Sight only (YHM-9371K) .................................................... $77.50
B.M.A.S. Three-Rail Gas Block only (YHM-9370) ...................................................... $56.50
Front Flip-Up Sight/Three-Rail Gas Block set (YHM-9370K) ................................................... $127.95
Three-Rail for .625” Barrel (YHM-9370-625) ................................................ $56.50
Three-Rail Kit for .625” Barrel
(YHM-9370-625K) ............................................ $127.95
www.bushmaster.com
75
B.M.A.S. FIxEd
ClAMP-ON FrONT SIGHT
IGHT
• A standard height front sight, this unit adds the convenience of a quick detach knurled thumbnut and clamping bar for easy removal • Returns to zero upon reattachment and includes standard AR includes standard AR
front sight post and detent system — adjustable for elevation
(YHM-9495K) .................................................... $50.50
B.M.A.S. lOw
PrOFIlE ClAMP-ON
FrONT SIGHT
• A low profile front sight of quality alloy steel that folds flat at the touch of its side button to allow clearance for any large bell scope
position with
repeatability,
• It flips up to lock in the deployed position with zero repeatability, and includes a standard, AR front sight post and detent system. Black phosphate finished; made in USA.
(YHM-9584K) .................................................... $78.95
B.M.A.S. lOw
w PrOFIlE
rEAr FlIP SIGHT
IGHT
• This flip-up rear sight for flat-top receivers features a steel base, a quick release release
thumb screw and an aluminum stem
• Locks up (deployed position) with the push of a button and folds down to .840 inches above the upper receiver
• Windage adjustment is 1/2 MOA, and a dual aperture rear peep is fitted
• Mounts to any Picatinny rail and will “co-witness” with standard AR15, M16 and M4 type front sights
• Once sighted-in, it can be removed and reattached with no loss of “zero”
• Fits behind A.R.M.S. SIR system fore-ends
(YHM-9680) ...................................................... $91.95
B.M.A.S. ClAMP-ON
rEAr FlIP-UP SIGHT
• An aircraft grade aluminum, flip-up auxiliary sight featuring dual apertures
apertures
• 1/2 MOA windage adjustment
• Convenient right hand adjustment knob and full height sight apertures
• Height when folded is 1/8” lower than similar designs
(YHM-9440) ...................................................... $79.95
BUSHMASTEr MOdUlAr
ACCESSOrIES SySTEM (B.M.A.S.)
FrONT FlIP SIGHT FOr V MATCH
rIFlES ANd CArBINES
• A high quality front sight that clamps around the V Match milled sight base/gas block — designed to be used with any open iron rear sight • This patent pending front flip sight is machined from aircraft aluminum with an anodized finish, installs with an Allen wrench, locks up or down with a push button and is elevation adjustable
• A standard front sight post is included, and the base is drilled and tapped for our B.M.A.S. sling swivel stud (see YHM-9364)
(YHM-9360K) .................................................. $106.50
76
Phone orders: 1.800.998.7928
A
B
B.M.A.S. SCOPE RISERS
ISERS
• Increase scope mounting height on flat-top style ARs by 1/2” to achieve proper cheek weld • Hard anodized aircraft aluminum — fit all Picatinny/Weaver rails
• Two required for scope mounting; sold individually
A. 3/4” Long
(YHM-9490) ..................................................... $13.50
B. 1 1/4” Long
(YHM-226) ........................................................ $15.95
RISER BlOCkS fOR PICATINNy
RAIl flAT-TOPS
• Black anodized aluminum riser blocks offer extra height for proper sight picture and comfortable cheek weld
and comfortable cheek weld
BUSHMASTER MOdUlAR
AR
ACCESSORy SySTEM
SCOPE RISER
• This riser solves problems of scope movement or rocking that might be encountered with individual riser sections
• A 5.25” Picatinny rail section mounts on any flat-top upper to raise the platform 1/2”
• Perfect on varmint rifles — accepts most types of scopes, red dot sights and other optics
• Machined from aircraft quality aluminum and hardcoat anodized to military specifications
(YHM-227A) ....................................................... $32.95
A
B
C
(LW-RB) .................................................... $13.95 each
B.M.A.S. RAIl ExTENSIONS —
4”–7”–11.25” lENGTHS
• These precision machined rail extensions — in standard Picatinny rail dimensions — mount on all flat-top upper receivers to elevate the mounting surface approx. 1/2” • The two longer lengths can join and solidify the upper receiver to any four rail fore-end offering the extra mounting surface length necessary for very large/long scopes or “scout-style” mounting
• All 3 rails offers the convenience of quick detach/reattach with knurled thumbnuts • Anodize finished machined aluminum with phosphated steel thumbscrews and clamping bars
4” Q. D. Rail Extension
(YHM-9595) ..................................................... $39.95
7” Q. D. Rail Extension (YHM-9592) ...................................................... $62.95
11.25” Q. D. Rail Extension
(YHM-9590) ...................................................... $86.95
B.M.A.S. ANGlEd
ACCESSORy MOUNTS
• Angled rail segments designed to mount various accessories at a 45° angle on a “flat-top” upper receiver or any multi-rail type fore-end
• Useful for flashlights or laser aiming devices, or with a pair you could mount a scope in an “offset” position and still retain iron sight use
• Available in 3 different lengths: A — One slot (3/4” length); B — Three slot (1 3/8” length); and C — Five slot (2 1/8” length)
• Machined from aircraft quality aluminum and finished in matte black hard anodize, mount to your rail surface with socket head screws
A. One Slot Mount
(YHM-9486A) .................................................... $21.95
B. Three Slot Mount
(YHM-9690A) ................................................... $26.50
C. Five Slot Mount
(YHM-9691A) .................................................... $30.95
www.bushmaster.com
77
BUSHMaSTEr
USHMaSTEr a3-TyPE
rEMOvaBlE Carry HaNdlE
wITH 1/2 MOa rEar SIGHT
• Add versatility to your “flat-top”— clamps solidly onto the Picatinny rail of any V Match or “flat-top” upper receiver with knurled thumbnuts, and includes an A2 dual aperture rear sight with 1/2 MOA windage and elevation adjustment • Machined from aircraft aluminum forging, with steel sight and clamp parts
(9349063-9) ................................................... $116.95 BENNIE COOlEy CO-wITNESSING
adjUSTaBlE MOUNT
• This optics mounting platform for the A2 carry handle AR15/
M16 is the most versatile co-witnessing mounting system made
• Vertically adjustable for easy alignment and custom fitting of any red dot optic (EOTech Holosight, Trijicon Reflex, Aimpoint Comp or others) in relation to the iron sights of the rifle. Mounts with a hex-head nut/threaded post, and height adjustments are made to the Picatinny rail with 8/32 button head retaining screws and the supplied 3/32” Allen wrench.
(EOT-12) .......................................................... $165.00
B.M.a.S. TrIPlE MOUNT raIl KIT
• A quality multi-purpose accessory mount that clamps to the barrel and fits around the front sight with three separate rail surfaces to allow mounting flashlights, bipod, laser sights, etc.
• Designed to fit both Post- & Pre-ban barrels (with bayonet lug), there are insert bushings included with this kit that allow fitting to either .720” diam. rifle barrels (20”/24”) or .740” diam.
(14.5”/16”) carbine barrels
• This triple mount will accept all Picatinny/Weaver base attachments, and is machined from high quality aircraft aluminum with Allen head clamping screws. Finished in black hard anodize to match rifle.
(YHM-639K) ...................................................... $89.95 78
Phone orders: 1.800.998.7928
B.M.a.S. SUPErlIGHT
BarrEl BUSHINGS
• A set of thicker steel bushings to mount the triple rail kit (below, left) to the thinner Bushmaster SuperLight barrels
(YHM-640-4) ...................................................... $13.95 $13.95
M203 GrENadE laUNCHEr
QUadraNT SIGHTS
fOr a2 & a3 TyPE rIflES
• These are government issue quadrant sights for the M203 grenade launcher • Sights include a flip-out post & aperture system, combined with an elevating scale set in 25 meter increments from 50m to 400m
• There are models for both the A2 solid carry handle rifles and carbines and the A3 removable carry handle type (they are not interchangeable)
For A3 Removable Handle Rifles (12598114) ..................................................... $105.50
For A2 Solid Carry Handle Rifles
(9346304) ......................................................... $81.95
B.M.a.S. HaNdGUard
MOUNTEd flIP-UP SIGHT
• The Bushmaster modular accessories system solution to a handguard mounted backup iron sight is this low profile, front flip-up unit
• It attaches to any fore-end Picatinny rail and folds down out of line of sight at the push of a button
• It locks up in a deployed position and mounts easily with a large knurled thumb screw
• Low profile, durable and lightweight all steel construction and manganese phosphate finished, includes AR square post, detent and spring; elevation adjustable just like the standard sight
B.M.A.S. Handguard Mounted Flip-up Sight
(YHM-9627) ....................................................... $81.95
ACCESSORIES
B.M.A.S. FlAT-TOP
FIxEd REAR SIGHT
• This AR15-Type fixed iron
sight offers the option of
mounting optics further forward on the flat-top rail
• The sight’s base is a heavy, black anodized aluminum block;
other parts are steel
• Windage and elevation adjustments are 1/2
(YHM-643K) .................................................... $102.50
KwIK-SITE
SEE-THRU SCOPE
MOUNT ANd
SCOPE RING SET
• For A1 or A2 rifles with the solid carry handle, this mount
features a wide, see-through channel to enable
the use of existing open sights
• Mounts to the handle with a large thumbnut
• A pair of 1” horizontally split scope rings is included
ClETUS FRONT SIGHT
PICATINNy RAIlS
• Mounts on the bayonet lugs under your front sight
• Very useful for mounting items, like lights, vertical grips and
sling connectors
• Three options available:
1) Without “ring”
2) With “ring” for right-handed shooters
3) With “big ring” for left-handed shooters
(10003) ............................................................ $64.95
(KSN-M16) ......................................................... $53.95
BUSHMASTER GAS PISTON RETRO-FIT CONvERSION KIT
FOR AR15/M4-TyPE CARBINES
Now you can easily add the gas piston system benefits of reliability, ease of maintenance, ability to fire a wider variety of ammunition, cooler
running, and consistent function with this Bushmaster gas-piston
• Patent pending, short stroke piston conversion system that includes all the necessary parts to convert your gas impingement type carbine
• Low maintenance piston housed within a tubular structure that pins right into your existing front sight base
• Vents the gases under the handguard and away from the operator
• The high performance bolt carrier features increased mass, an integral impact lug and specially designed anti-wear features to protect your
receiver
• Readily installed into your factory upper receiver assembly without permanent modifications to your carbine
• Supplied with the kit are heat shielded M4 (oval) type handguards designed specifically to withstand rapid fire heat
• Fully functional for both semi-automatic and full-automatic weapons and can be easily installed at home with simple hand tools
The unit pictured below had just successfully completed — without failure — a 10,000-round non-stop endurance test!
(GP-GSR) M4 Barrel ........................................... $399.95
(GP-GSR-HB) Heavy Barrels ................................. $399.95
M4 Type
Handguards w/
Heatshields
Piston Housing
Support
Bolt
Carrier
with Striker
Face
Carrier,
Piston and
Piston
Housing
Operating Rod
with Spring
and Upper
Receiver Guide
Sleeve
www.bushmaster.com
79
accessories
M7 Bayonet with M10 scaBBard
• Fits 20” & 14.5” Bbl. AR15/M16 and AR180
(GC-BAYO SCAB KIT) ............................................ $34.95
M9 Bayonet with scaBBard
• Designed to serve as a bayonet, a fighting knife, field knife and wire cutter
• It fits many Bushmaster models, as well as other M16 and AR15-Type rifles • Features a heavy 7.25” steel blade fitted with a checkered, black composite plastic handle
• Black oxide finish blade to reduce glare, and includes machined saw teeth on back edge
• Overall length is 14.5” (36.8 cm) and weight is 28 oz. (.79 kg)
eagle Padded rifle cases for
ar-tyPe rifles & other firearMs
• Each case features a lockable outside cargo compartment; adjustable magazine pouches; reinforced 2” wide carrying handles; heavy duty YKK zippers; and a 2” wide, padded shoulder strap attached to welded steel D rings
• These quality Eagle cases will fit most standard military-type AR15/M16 rifles
Full Size Rifle Case (RC-4123) ......................................................... $79.95
• Approx. internal dimensions: 40” x 11” Carbine Sized Case (RC-36) ............................................................. $79.95
• Approx. Internal Dimensions: 36” x 11” 30” Carbine Sized Case (RC-3223) ........................................................ $79.95
• Fits FNC, LAR Para 30” & Tele AKs
Extra Long Barrelled Rifle Case (RC-4608) ......................................................... $79.95
• Approx. internal dimensions: 45” x 10”
• This case will fit FAL 44 1/2” & LAR-HB 45” rifles.
(GCC-M9 BLK BAYO) .......................................... $109.99
NOTE: Bayonets are designed to fit only 14.5” & 20” barrelled suppressors/muzzle
rifles and will only work with certain flash suppressors/muzzle brakes, Phantoms,
brakes, such as birdcage types, Izzy brakes, Phantoms, Mini & Bushmaster sales if you have questions
Y-comps. Consult Bushmaster sales if you have questions about a application.
particular application.
BushMaster logo
eMBroidered carrying cases
Logo Embroidered Carbine Case (RC-36A) ............................................................ $85.95
• Approx. internal dimensions: 36” x 11” the
he BushMaster rifle case
• EEconomical
conomical storage or travel protection for your Bushmaster, or storage or travel protection
other firearms
firearms
• 47”x 9”x 3”dimensions, this case holds a full sized AR15/M16 3”dimensions,
rifle, or a scope mounted AR with receivers separated • Shipping for first case is $7.50; additional cases: $6.00 each Bushmaster Rifle Case
Logo Embroidered Rifle Case (RC-4123A) ................ $85.95
• Approx. internal dimensions: 40” x 11” • A case for full-sized rifles, with Bushmaster logo embroidered in red and white (10483) ............................................................ $18.95
BushMaster large hard case
• Oversized, hard-sided rifle case perfect for storing an ACR® and accessories
• Clamshell-style design of durable black plastic with egg-crate foam lining and four snap closures (F1000942) ..................................................... $44.95
80
Phone orders: 1.800.998.7928
u.s. PeacekeePer nylon
dePloyMent Bag
• Designed specifically for the Bushmaster ACR® rifle
• Adjustable straps for securing the rifle, a spare barrel pocket, wide elastic bands to accommodate three 30-round magazines
• Removable padding, two drain vents, wrap-around carry handles and double zippers • Available in black with subdued Bushmaster logo
(F1006548) ...................................................... $49.95
Discreet carrying
case for carbines
• 32” black Cordura low profile case
• Includes four interior magazine pouches (for up to 40 rd. mags)
and a padded outside pocket for accessories
• Approximate internal dimensions: 32” x 13”
the “life JacKet”
safety Device
for ar15/m16 rifles
ifles
• Polycarbonate clamshell enclosure
locks up your AR-type rifle and covers
the entire action
• Two separate keyed locks and keys are included
• Foam padded interior with fixed carry handle
NOTE: To use the life jacket on a rifle with our V Match tubular
aluminum fore-end, some material will have to be removed
from the front opening.
(L J -1) .............................................................. $29.95
Discreet Case for Carbines
(DC-CAR-15) ....................................................... $85.95
Discreet Case for Rifles
(DC-M16/AR15) ................................................. $85.95
• A similarly styled model with inside dimensions of 41” x 13”
— designed for full-sized AR15/M16
Discreet Case for Uzi Short Bbl. SMGs
(DC-22) ............................................................. $85.95
• Approx. internal dimensions of 22” x 11”
bushmaster blur folDer by
Kershaw — a Ken onion Design
• Premium quality knife features a 13C26 stainless steel blade for
strength and corrosion resistance
• Specifications: Blade length — 3 3/8” (8.6 cm); Closed
length — 4 1/2” (11.3 cm); Weight — 4.2 oz.
(1670RD) .......................................................... $94.95
bushmaster
sighting-in
targets
(QP-015K) .......$2.95 / Pkg. of 12
vapor ii glasses
(R-01535) ......................................................... $12.95
• Sleek, sporty style
• Wrap-around polycarbonate lens with anti-fog coating
• Soft nose bridge prevents slipping
• Lightweight frame design
• Meets ANSI Z87+ and CSA Z94.3 standards
peltor presiDent
hearing protector
• Peltor’s President model features
exclusive liquid foam ear cushions
that are designed for all-day comfort,
and the padded stainless steel wire
headband and generously sized
earcups automatically self-align for perfect fit and protection
• The President offers a noise reduction rating of 24 decibels, and
its earcups can be adjusted in height from the headband
• The headband will fold down around the earcups for compact
storage
(AOS97069) ...................................................... $24.95
bushmaster
schematic
parts poster
(Color printed on 80# glossy stock paper)
14.5” barreled M4A3-Type carbine (shown)
(QP-010B) ................................ $4.95
20” barreled A2 Semi-Automatic Rifle
(QP-010) ............................................................. $4.95
www.bushmaster.com
81
accessories/apparel
Bushmaster logo mug
(QP-016) ............................................................. $4.95
Bushmaster Knit caps
Bushmaster logo patch
Orange Knit Cap (QP-002OR)
Black Knit Cap (QP-002B)
Navy Blue Knit Cap (QP-002N)
Gray Knit Cap
(QP-002G) ...................................................$9.95 each
Black Skully Hat
(GTB) ........................................................$12.95 each
(QP-012) ............................................................ $2.95
Bushmaster logo Decal
(QP-013) ............................................................. $1.95
Bushmaster BlacK & tan cap
Black Cap
(QP-001) ............................................................. $9.95
Tan Cap
(QP-001T) ............................................................ $9.95
Bushmaster BomBer hat
Black (QP-200B) or Khaki (OP-200S) ..................... $24.95
82
Phone orders: 1.800.998.7928
Bushmaster Blaze orange
hunter’s cap
(QP-002OH) ....................................................... $10.95
Bushmaster sport shirts
• A 50/50 blend knit sport style shirt with collared,
three button neck
• Bushmaster snake logo embroidered in two colors
on upper left chest
• Comfortable, durable, and great for the field,
range or sporting event
• Order with the part numbers shown below followed
by your size: S–M–L–XL–2XL
White
(QP-002W & size) .............................................. $24.95
Black
(QP-002 & size) ................................................. $24.95
Bushmaster two-tone cap
(QP-002TTBR) ...................................................... $9.95
Bushmaster Fleece-lined
Jackets
Bushmaster canvas cap
(QP-002BR) ......................................................... $9.95
• Lots of the folks at the Bushmaster factory stay warm all the
Maine winter long with this fleece-lined jacket
• Its Toughlan® nylon shell is windproof and water resistant; it has a
winter weight 11.5 oz. fleece lining and 3 zippered pockets
(2 outer and 1 inner)
• Bushmaster logo is embroidered in red and white on the
left chest
• Available in black with black fleece lining, or khaki tan with
green fleece lining
• Order with the part numbers shown below followed by your
size: S–M–L–XL–2XL–3XL–4XL–5XL
Black
(QP-8800BB & size) ........................................... $69.95
Khaki
(QP-8800TG & size) ............................................ $69.95
www.bushmaster.com
83
accessories/apparel
Bushmaster logo sweat shirts
• Heavy Jerzees “Super Sweats” crewneck pull-over sweatshirts (50% cotton/50% polyester)
• Bushmaster snake logo embroidered in red/white/black on upper left chest
• Order with the part numbers shown below followed by your size: S–M–L–XL–2XL
Bushmaster logo
emBroidered t-shirt
• Heavyweight and high-quality 100% cotton
• Embroidered red and black Bushmaster snake logo on upper left chest
• Order with the part numbers shown below followed by your size: M–L–XL–2XL
Khaki Tan (QP-021K & size) ............................................... $27.95
Black (QP-021B & size) ............................................... $27.95
Gray (QP-021G & size) ............................................... $27.95
White (QP-007 & size) ................................................. $14.95 Bushmaster screen
printed t-shirts
• Quality blend 50% cotton/50% polyester
• Bushmaster snake logo silkscreened in two colors on upper left chest with larger variations on the back
• Order with the part numbers shown below followed by your size: S–M–L–XL–2XL
Black
(QP-003 & size) ................................................. $15.95 White (QP-003W & size) .............................................. $15.95
84
Phone orders: 1.800.998.7928
Bushmaster long sleeve
logo emBroidered t-shirt
• Heavyweight ultrablend 50% cotton/50% polyester
• Embroidered red and black Bushmaster snake logo on upper left chest
• Order with the part numbers shown below followed by your size: M–L–XL–2XL
Black (QP-0222B-L & size) ........................................... $16.95 ORDERING INFORMATION
ORDERING INSTRUCTIONS/SHIPPING INFORMATION
FOR FASTEST ORDER PROCESSING, visit our website and order direct from our online catalog at www.bushmaster.com
Our entire catalog and more is on the Internet — offering easy and secure ordering without waiting time on the phone! Many of our orders
received via Internet are processed and shipped the same day (with the exception of back ordered items). Any orders that include e-mail addresses automatically get a return mail confirmation of shipment including the type of shipping service, a FedEx tracking number (if applicable),
and notification of multiple packages. Customer service and technical support inquiries can also be handled quickly and efficiently by e-mail.
Contact us at: Customerservice@bushmaster.com • Techsupport@bushmaster.com • Export@bushmaster.com
For Telephone Orders, Call: 1-800-998-7928
Bushmaster sales consultants are on call: Mon. through Fri.: 8:30 am–7:00 pm (Eastern Standard or Daylight Savings Time — all other hours
of the day by answering machine)
For Orders by FAX: 1-207-892-8068 • Customer Service: 1-800-883-6229
(Customer Service Phone Hours: Monday through Friday, 8:30 am–6:00 pm)
All catalog prices are in U.S. dollars — please pay in U.S. currency
CATALOG PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE!
Current pricing can be seen on our website — www.bushmaster.com
Please have your credit card available. FREE gunsmithing and assembly is available on most AR15/M16 parts at the time of purchase.
We accept purchase orders from federal, state and local governments and institutions.
SHIPPING — Orders will be shipped promptly via FedEx or First Class U.S. Mail. FedEx Ground is our standard method of shipment
Standard Overnight (1 day), FedEx 2 Day, and FedEx Express Saver (3 day) services are available upon request. All orders must be accompanied with cash, credit card information, money order or cashier's check. We request telephone numbers and/or e-mail address when you
order to provide the best possible service in case of questions. In an effort to preserve your privacy, we do not sell our mailing lists. An F.F.L.
(Federal Firearms License) is required for the purchase of complete rifles, serial numbered lower receivers, or M16 components. Other parts and
accessories do not require special licenses. Personal checks are held 15 days to clear. No refunds after 30 days of invoice date. Returned parts
will incur a 20% restocking charge.
NOTE: FedEx has a mandatory “Adult Signature Required” (21 years or older) for all complete firearms and lower receiver shipments. This
Adult Signature Requirement is a FedEx regulation and cannot be waived.
PISTOLS — Federal law requires that all pistols be shipped by Air Service. FedEx’s mandatory “Adult Signature Required” (21 years or older)
will also be in effect.
DAMAGE — If your FedEx package arrives damaged, you must alert the FedEx driver, or call FedEx to notify them of damage problems and to
initiate a claim. The FedEx toll-free national telephone line for this purpose is 1-800-GO-FEDEX.
INTERNATIONAL ORDERS — Bushmaster will now accept international orders of any amount, subject to U.S. State Department (ITAR) and
Dept. of Commerce regulations. Bushmaster does have established dealers in countries outside the U.S. who may be able to supply
— contact Bushmaster for further information.
For shipping parts only — within continental U.S.
(Shipping to Puerto Rico and other territories is charged at cost.)
Shipping, handling & insurance charges for FedEx Ground Service or U.S. Mail are:
$0.00 - $19.99 = $6.50 / $20.00 - $49.99 = $9.00 / $50.00 - $99.99 = $11.50
$100.00 - $249.99 = $14.50 / $250.00 - $499.99 = $18.00 / $500.00 and up = $21.00
For shipping complete firearms – within continental U.S.
Standard rifle: FedEx Ground — $16.50 ea.; DCM rifle: FedEx Ground — $19.50
Pistols: BY LAW — must be shipped by Air Service.
Free shipping on back-ordered “parts” only. Shipping charges on parts orders over 20 lbs. will be calculated by weight only using our FedEx
published rates plus insurance of .50¢ per $100.00 value.
FedEx Standard Overnight (1 day), FedEx 2 Day, and FedEx Express Saver (3 day) services are available upon request.
www.bushmaster.com
85
ordering information
order form
Your fastest ordering method is on the internet at www.bushmaster.com
Ship To:
Name
Customer No.
(If available – see catalog label)
Address
City
State
Phone Number
ZIP
E-mail
Method of Payment: o Check or money order enclosed (Personal checks are held for 15 days to clear.)
o MasterCard o VISA o American Express o Discover
All credit card orders must include phone number and must be shipped to address where cardholder receives credit card billing.
If payment is made with o Gift Certificate (Certificate Number)
Credit Card Account Number
Expiration Date
Signature
Ship Via: o FedEx Ground (our standard method – other services available)
o U.S. Mail – PARCEL POST (No C.O.D.s*)
Have you ordered from us before? o Yes o No
Page
No.
Qty
Would you like to receive future catalogs? o
Part No.
Price
(each)
DescriPtioN
Shipping, handling & insurance charges for parts only — FedEx Ground Service or U.S. Mail: other FedEx services are available at extra
cost — consult your salesperson.
$ 0.00 - $19.99
$20.00 - $49.99
$50.00 - $99.99
= $ 6.50
= $ 9.00
= $11.50
$100.00 - $249.99
$250.00 - $449.99
$500.00 - up
= $ 14.50
= $ 18.00
= $ 21.00
Standard Rifle – FedEx Ground – $16.50 ea. / DCM Rifle – FedEx Ground – $19.50
Pistols must be shipped by Air Service. Shipping will be free on back-ordered “parts” only.
Shipping charges on parts orders over 20 lbs. will be calculated by weight only using our FedEx
published rates plus insurance of .50¢ per $100.00 value.
Call about shipping orders to Hawaii, Alaska, Puerto Rico and other U. S. Territories.
SATISFACTION GUARANTEED, OR YOUR MONEY BACK.
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
86
Phone orders: 1.800.998.7928
SUbTOTAL
All States Sales Tax
Shipping, Handling & Insurance
ToTal amounT
amouNt
Customer serviCe, exChanges,
BaCk orders, gunsmithing, Warranty
NOTE: With the “Sunsetting” of the Gun Legislation of 1994, many features of “Pre-ban” rifles are again available — BUT not in all areas!
California, Connecticut, Hawaii, Massachusetts, Maryland, New Jersey, New York, Puerto Rico, and possibly others, all have their own statutes
regarding what they call “assault weapons.” To avoid the possibility of legal problems, check your local laws before purchasing some items
offered in this catalog.
CUSTOMER SERVICE. Our telephone personnel are highly experienced and well informed firearms enthusiasts. If you have any questions about
Bushmaster products, you'll find a courteous member of our firm willing and able to answer them — just call our toll-free customer service line
(1-800-883-6229) between 8:30 am–6:00 pm, Monday through Friday, (EST). We will also be happy to promptly answer your questions or
order inquiries via e-mail to: Customerservice@bushmaster.com
EXCHANGES. Should items you order from Bushmaster not be to your expectations, please contact our customer service department for a Return
Merchandise Authorization (RMA) number. Unused items may be returned within 30 days, include a copy of your invoice. Note: Any custom
barrel assembly — not shown in catalog — may not be returned. No refunds allowed after 15 days of invoice date. Restocking charge 20%.
Include invoice with your return — its upper left corner can be used as return label. Return all pieces of kits — wrap and package them
securely. Insure package for your protection. Include the reason for return of each item in an accompanying letter, and we will do everything
possible to speed your exchange.
BACK ORDERS. We make every attempt to deliver your order from available stock — immediately. Should there be a back order on a part,
we'll ship the bulk of your order and WE pay the shipping on the back-ordered part (with the exception of complete rifles). FedEx Standard
Overnight (1 day), FedEx 2 Day and FedEx Express Saver (3 day) services are available upon request at additional charge.
BUSHMASTER GUNSMITHING. Our company policy is to offer gunsmithing assembly at no charge when parts are purchased from us (with the
exception of sight bases). We will also offer our professional gunsmithing services to any customers who care to ship us their firearms or assemblies for repair or buildup — and we will work on brands other than Bushmaster. Gunsmithing time is charged at $40.00 per hour, and we
charge a $16.50 fee for return shipping of your rifle, upper or parts ($19.50 for DCM Rifles due to extra weight). For a gunsmithing estimate,
please call 1-800-998-7928 or e-mail to: Techsupport@bushmaster.com
BUSHMASTER LIMITED ONE YEAR WARRANTY. Bushmaster Firearms are warranted to be free from defects in materials and workmanship. Any
such defect of which Bushmaster Firearms International, LLC is given written notice, as provided below, within one year and ten days from
the date of first purchase by a customer will be remedied by Bushmaster Firearms International, LLC. This warranty is granted by Bushmaster
Firearms International, LLC, P.O. Box 1479, 999 Roosevelt Trail, Windham, Maine 04062.
To initiate a warranty claim, call Bushmaster customer service (toll free: 8:30 am to 6:00 pm EST – Monday thru Friday 1-800-883-6229) to
get an RMA number (“Return Merchandise Authorization”). Warranty claims should state (in writing) the model and serial number of the firearm concerned, a description of the difficulty experienced, and the date of purchase. The firearm concerned should be shipped (transportation
charges prepaid), to the Warranty Service Department, Bushmaster Firearms International, LLC, 999 Roosevelt Trail, Windham, ME 04062.
Firearm shipment should be insured by the owner, as Bushmaster Firearms International, LLC will accept no responsibility for loss or damage in
transit.
Shipping and insurance charges for the return of a firearm to its owner will be paid by Bushmaster Firearms International, LLC if the related
claim is a proper claim for warranty work.
Under no circumstances shall Bushmaster Firearms International, LLC be responsible for incidental or consequential damages with respect to
economic loss or injury to property, whether as a result of express or implied warranty, negligence or otherwise. Some states do not allow the
exclusion of limitation of incidental or consequential damages, so the above limitation may not apply to you. Bushmaster Firearms International, LLC will not be responsible for the results of careless handling, unauthorized adjustments, defective, low quality, reloaded, or improper
ammunition, corrosion, neglect, ordinary wear and tear or unreasonable use. Furthermore, the liability of Bushmaster Firearms International,
LLC under this warranty shall be limited solely to the obligation to repair or replace the firearm, and to pay transportation and insurance charges
for return of the firearm to owner.
NOTE: Handguns and long guns are classified as FIREARMS or DANGEROUS WEAPONS. Guns are surrendered by Bushmaster Firearms
International, LLC with the express understanding that it assumes no responsibility for resale handling under local laws and regulations.
A NOTE REGARDING LEAD. Discharging firearms in poorly ventilated areas, cleaning firearms or handling ammunition may result in exposure
to lead, a substance known to cause birth defects, reproductive harm and other serious physical injury. Have adequate ventilation at all times.
Wash hands thoroughly after exposure to lead.
www.bushmaster.com
87
Since 1978, the finest commercial AR-type platform rifles in the world.
Stringent quality and unmatched product engineering. The professional choice
of law enforcement and defenders of freedom around the world. Ready for
anything. Prepared for everything. At Bushmaster,® respect is earned.
® ®
Bushmaster
Bushmaster
Firearms
Firearmsinternational,
international,llC.
llC.
999
999roosevelt
roosevelttrail
trail• P.o.
• P.o.Box
Box1479
1479
Windham,
Windham,me
me04062
04062
www.Bushmaster.Com
www.Bushmaster.Com
Phone
Phoneorders:
orders:1-800-998-7928
1-800-998-7928
Customer
CustomerserviCe:
serviCe:1-800-883-6229
1-800-883-6229
Find Bushmaster on Facebook at
bushmaster.com/facebook.
MR 1010
Bushmaster is a trademark of Bushmaster Firearms International, LLC. Magpul is a trademark
of Magpul Industries Corp. Facebook is a registered trademark of Facebook, Inc.
© 2011 Bushmaster Firearms International, LLC, Windham, ME 04062

bushmaster® varminter rifle

Transcription

Similar documents

$50 CASH BACK BY MAIL

35 years strong. 35 years strong.

CASH BACK - walmart images

mini-beryl - Fabryka Broni

Jeff K.`s `M1917 Enfield`

25mm M242 Bushmaster

ARGENTINE M1891 "ENGINEER`S CARBINE" Caliber 7.5 Argentine

Assault Rifle Cases ARC - Elite Survival Systems

Shooters Review the ELCAN SpecterDR™

Introduction Basic principles Bore sighting