HERE

Plas-Tool_8pg:Layout 1
6/4/08
7:31 PM
Page 1
AUCTION
P L A S -TO O L CO.
VERY CLEAN MACHINE & MOLD SHOP
7430 Croname Road • Niles, IL
Wednesday June 18th at 10:00 a.m.
Mori Seiki LL-8 Lathe
DIRECTIONS
From the intersection of Howard Street and Caldwell,
proceed East on Howard to the first light, Croname Road.
Turn right, South and proceed to auction site. Plas-Tool
is located south of Howard and North of Grosse Pointe
Road on Croname Road.
Nomura B-100SR
INTERNATIONAL
AUCTIONEERS,
INCORPORATED
Appraisals • Auctions • Liquidations
8711 West Bryn Mawr • Suite 605 • Chicago, IL 60631
Tel.: 773.864.9775 • Fax. 773.864.9776
www.iaiauctions.com
IL Auction Lic. #441.0000551
Plas-Tool_8pg:Layout 1
6/4/08
7:31 PM
Page 2
PLAS-TOOL CO. • 7430 Croname Road, Niles, IL • Wednesday, June 18th at 10:00 a.m.
Mori-Seiki DLL-1500 Lathe
Mori-Seiki SL-4 Lathe
Mori-Seiki SL-6 Lathe
Cazeneuve HB 575
Hardinge HLV
Leblond Lathe
of headstock above table, 40” table cross travel, 24” table longitudinal travel, #50 spindle taper, power draw bolt, pendant control,
metal way covers, coolant
CNC TURNING CENTERS
Mori-Seiki Model SL-6 CNC Slant Bed Turning Center: with Fanuc
System 6TA control, 28” 4 jaw chuck, 38” center to center, 12 position
turret, tailstock, chip conveyor, coolant
Nomura Model B-85SR Table Type Horizontal Boring Mill: s/n 3885;
with 3.5” spindle, 36” x 40” built-in rotary table, spindle speeds
from 10 to 1200 RPM, spindle travel 20”, Fagor 3x DRO, 40” vertical
travel of headstock above table, 40” table cross travel, 24” table
longitudinal travel, #50 spindle taper, power draw bolt, pendant
control, metal way covers, coolant
Mori-Seiki Model SL-4 CNC Slant Bed Turning Center: with Fanuc
System 5T control, 15” 4 jaw chuck, 8 position turret, 22” swing, 30”
center to center, tailstock, chip conveyor, coolant
1986 Mori-Seiki Model LL-8 CNC Turning Center: with Fanuc 11TE-A
control, 48” 4 jaw chuck, 52” swing, 2-tool posts, 72” center to center, tailstock, chip conveyor, coolant
GRINDERS
1995 Okamoto 16” x 32” Model ACC-16-32 DX Hydraulic Surface
Grinder: s/n 68301; with Kanetsu 16” x 32” electro-magnetic chuck,
operator’s console with DRO, incremental down feed, spark out,
plunge, wheel dresser, coolant system with filter, 230/460 volt
electrics
Mori-Seiki Model DLL-1500 CNC Turning Center: with Fanuc 2000C control, 36” 4 jaw chuck, 40” swing, 2-tool posts, 72” center to center,
tailstock, chip conveyor, coolant
Mori-Seiki Model LL-1500 CNC Turning Center: with Fanuc 2000C control, 36” 4 jaw chuck, 40” swing, 78” center to center, 2-tool posts,
tailstock, chip conveyor
Okamoto 8” x 20” Model 820A Automatic Hydraulic Surface Grinder:
s/n 1253; with 15.6” vertical clearance, hydraulic system, coolant
system, operator’s console, power down feed, sparkout, 230/460
electrics
TABLE TYPE HORIZONTAL BORING MILLS
Nomura Model B-100SR Table Type Horizontal Boring Mill: s/n 4917;
with 4” spindle, 45” x 50” built-in rotary table, spindle speeds from
10 to 1200 RPM, spindle travel 26”, Fagor Innova 3x DRO, 50” vertical
travel of headstock above table, 60” table cross travel, 43” table longitudinal travel, #50 spindle taper, power draw bolt, pendant control,
metal way covers, saddle supports, coolant, 20 hp main motor
Nomura Model B-85SR Table Type Horizontal Boring Mill: s/n 8934;
with 3.5” spindle, 36” x 36” built-in rotary table, spindle speeds from
10 to 1200 RPM, spindle travel 20”, Fagor 3x DRO, 40” vertical travel
Okamoto 6.12/14 Linear Surface Grinder: s/n 2707U; with Fagor 2x
DRO, Brown & Sharpe Perma-Sine magnetic chuck, Bijur lube,
coolant system, work light
Gardner 10” x 15” No. 1 ½ Surface Grinder: s/n 510-9; with 10” x
15” electro-magnetic fine line chuck with controls, coolant system
2
3-Boyar-Schultz Six Twelve DeLuxe Surface Grinders: s/n 16447,
16448 & 10619; with Brown & Sharpe Perma-Sine tilting magnetic
chuck, 1 hp spindle motor
Plas-Tool_8pg:Layout 1
6/4/08
7:31 PM
Page 3
INSPECTION: Day before sale from 9:00 a.m. to 4:00 p.m. and Morning of sale from 8:00 to 10:00 a.m.
Nomura B-85SR with 36” x 36” table
Nomura B-85SR with 36” x 40” table
Boko WF2 Mill with 32” x 47” table
Boko WF2 Mill with 25” x 40” table
Parker-Majestic O.D. – I.D. Universal Cylindrical Grinder: s/n 1964-16C66; with 10” x 24” capacity, accessories, Gusher coolant pump, Bijur
lube, 220 volt electrics
Boko Hydro-Mill Universal Bed-Type Vertical Mill: with Fagor 2x DRO,
25” x 40” indexing table, spindle speeds from 31.5 to 2800 R.P.M.,
#50 taper, 24” table cross travel, 40” table longitudinal travel, 32”
throat, 25” headstock vertical travel, power down feed, hydraulic tank
and pump, coolant, work lights
Sakazaki SEC Model SG-6 Universal Cutter Grinder: s/n 8128; with collets
2-Deckel Model SO Single Lip Grinders: s/n 13510 & 10674; with collets
Bridgeport 2 HP Variable Speed Ram Type Vertical Mill: s/n BR259283;
with Acu-Rite Millmate 2x DRO, 9” x 42” table, 4” riser, spindle speeds
from 60 to 4200 R.P.M., chrome ways, Bijur lube, R-8 collets, work
lights
Gorton Model 375 Cutter Grinder: s/n 45120; with cabinet base, collet set
Sellers Type 6G Drill Grinder: s/n E6410; with Gusher coolant pump
MILLING MACHINES
Boko WF2 Hydro-Mill Universal Bed-Type Vertical Mill: with Fagor 2x
DRO, 32” x 47” indexing table, spindle speeds from 31.5 to 2800
R.P.M., #50 taper, 32” table cross travel, 47” table longitudinal travel,
32” throat, power down feed, hydraulic tank and pump, coolant,
work lights
2-Bridgeport 2 HP Variable Speed Ram Type Vertical Mill: s/n
BR259321 & BR259285; with Acu-Rite Millmate 2x DRO, 9” x 42”
table, spindle speeds from 60 to 4200 R.P.M., chrome ways, Bijur lube,
R-8 collets, work lights
3
Bridgeport 2 HP Variable Speed Ram Type Vertical Mill: s/n BR259326;
with Newall Topaz 2x DRO, 9” x 42” table, spindle speeds from 60 to
4200 R.P.M., chrome ways, Bijur lube, R-8 collets, work lights
Plas-Tool_8pg:Layout 1
6/4/08
7:32 PM
Page 4
PLAS-TOOL CO. • 7430 Croname Road, Niles, IL • Wednesday, June 18th at 10:00 a.m.
Okamoto 820A Grinder
Okamoto 1632 Grinder
Gardner Grinder
Okamoto 612 Grinder
Parker Majestic Grinder
Gorton 375 Grinder
SEC Grinder
Bridgeport 2 HP Series 1 Variable Speed Ram Type Vertical Mill: s/n
12BR210963; with Acu-Rite 3x DRO, 9” x 48” table, spindle speeds
from 60 to 4200 R.P.M., chrome ways, R-8 collets, work lights
Bridgeport 1 HP J-Head Ram Type Vertical Mill: s/n 12BR105431; with
9” x 42” table, spindle speeds from 80 to 2720 R.P.M., Bijur lube, R-8
collets, work lights
Bridgeport 1.5 HP Variable Speed Ram Type Vertical Mill: s/n
12BR128882; with Trak model 102 2x DRO, 9” x 42” table, 4” riser,
spindle speeds from 60 to 4200 R.P.M., Bijur lube, R-8 collets, work
lights
MACHINE ACCESSORIES
Troyke 12”Compound Rotary Table, Advance 14”Compound Rotary
Table, 6-Troyke 18” Model R-18 Rotary Tables, Troyke 15” Rotary Table,
Troyke 10” Rotary Table,
Bridgeport 15” Rotary Table, 12-6” machine vises, Bridgeport milling
attachment, 4-Bridgeport quill attachments, Bridgeport 7.5” riser, Boko
right angle milling attachment, P&W 16” tilting rotary table, large
angle plates, dividing heads, sine plates, Harig grind-all, magnetic
sines & V-blocks, 5C collet spinners, C-clamps, holddowns, etc.
2-Bridgeport 1.5 HP Variable Speed Ram Type Vertical Mill: s/n
12BR128930 & 12BR90934; with Trak model 102 2x DRO, 9” x 42”
table, spindle speeds from 60 to 4200 R.P.M., Bijur lube, R-8 collets,
work lights
Bridgeport 1.5 HP Variable Speed Ram Type Vertical Mill: s/n
12BR128899; with 9” x 42” table, spindle speeds from 60 to 4200
R.P.M., Bijur lube, R-8 collets, work lights
4
LATHES
Hardinge 11” x 18” Model HLV-H Precision Lathe: s/n HLV-H-7219-S;
with threading, spindle speeds from 125 to 3000 R.P.M., power feed to
Plas-Tool_8pg:Layout 1
6/4/08
7:32 PM
Page 5
INSPECTION: Day before sale from 9:00 a.m. to 4:00 p.m. and Morning of sale from 8:00 to 10:00 a.m.
Bridgeport 2HP V.S. Mill
Bridgeport 2HP V.S. Mill
Bridgeport 2HP V.S. Mill
Bridgeport 2HP V.S. Mill
Eisele Bandsaw
G&L Bickford Radial Drill
Marvel Bandsaw
Deckel Model KF-12
Deckel Model KF3S
Deckel Model GK-21
carriage, tailstock, quick collet closure, 5C collets, coolant
SAWS
Marvel 18” Series 8 Model 8/M2/M8 Vertical Bandsaw: s/n 88348;
from 20 to 200 FPM, coolant, chip pan
LeBlond Regal Servo-Shift 32” x 54” Sliding Bed Gap Type Engine
Lathe: s/n 5H-476; with 32” 4 jaw chuck, 54” swing in gap, 28”
swing over bed, spindle speeds from 9 to 720 RPM, tailstock, coolant,
chip pan, 2.25” hole in spindle
Bama Eisele 11” Model HB 280 Horizontal Bandsaw: with power
clamping, coolant
Craftsman 12” Vertical Bandsaw, Kalamazoo K1 8” Abrasive Chop Saw
Cazeneuve 22” x 64” Model HB 575 Engine Lathe: s/n 13104-G10;
with inch/metric threading, spindle speeds from 25 to 2000 R.P.M.,
10” 3 jaw chuck, 16” 4 jaw chuck, tailstock, 2” hole in spindle,
coolant, chip pan, work light
Cazeneuve 22” x 64” Engine Lathe: s/n 8521-G7; with inch/metric
threading, spindle speeds from 25 to 2000 RPM, 2” hole in spindle,
tailstock, steady rest, coolant, chip pan,
RADIAL DRILL
Giddings & Lewis Bickford Chipmaster 4’ Arm x 11” Column Type
952 Radial Drill: s/n 00126; with spindle speeds from 40 to 1600
R.P.M., base extension, box table and tilting box table, power clamping, hydraulic counter-balance to spindle, coolant
5
Plas-Tool_8pg:Layout 1
6/4/08
7:32 PM
Page 6
PLAS-TOOL CO. • 7430 Croname Road, Niles, IL • Wednesday, June 18th at 10:00 a.m.
Accessories
Angle Plate
Angle Plates
P & W Rotary Table
Rotary Tables
Machine Vises
Tooling
Elox 12-4832 EDM
Nelmor Granulator
DME Temp. Controller
Hyd. Core Pull
Pump and Filter
DECKEL MILLS
Deckel Model GK-21 Pantograph Engraving and Profile Milling
Machine: s/n 7821; 17” x 17” work table, 10” x 28” work area, spindle speeds to 20,000 rpm, accessories
PLASTIC INJECTION MOLDER & AUXILIARY EQUIPMENT
Deckel Model KF3S Universal Copy Milling Machine: s/n 0175; 47” x
25” work table, 16” x 16” copy table, 27” x 22” maximum work area,
spindle speeds to 20,000 rpm, accessories
D-M-E 12 Zone Mold Temperature Controller: with 8 modules
Deckel Model KF-12 Universal Copy Mill: s/n 2934
2-Jiffy-Shot Model MS-101 Mold Sampler: s/n 2831 & 2033
ELECTRICAL DISCHARGE MACHINES
Elox Model 12-4832 Ram Type EDM: with TCV-200 power supply,
Anilam Microwizard 2x DRO, AEC chiller
Walter Norris Hydraulic Core Pull
Elox Model 8-62 Ram Type EDM: s/n 032666; with Newall 2x DRO
IMPCO 700 Ton Model MA700-FA125 Toggle Plastic Injector Molder:
s/n C-3619-70
Westhoff High Speed Carbide Drill
Nelmor Model G1012M1 Plastic Granulator: s/n 78-12-13150; with 10
hp motor
D-M-E 13 Zone Mold Temperature Controller
AEC 30 Ton Portable Air Chiller
6
Trinco Model 48x48/BP2 Shot Blast: s/n 14361-8; with dust collector
Plas-Tool_8pg:Layout 1
6/4/08
7:32 PM
Page 7
INSPECTION: Day before sale from 9:00 a.m. to 4:00 p.m. and Morning of sale from 8:00 to 10:00 a.m.
2002 Mercedes S500 Sedan
Chevy H.D. 3500 Truck
Crane Scale
Hardness Testers
Clark Truck
Inspection
Joy Twistair air compressor
Joy Twistair air compressor
HOISTS
7-Coffing 2 Ton Electric Hoists, Coffing 3 Ton Electric Hoist
WELDER
Miller Dialarc HF 250 Amp AC/DC Gas Tungsten Arc Welder: s/n
HH072148;
MATERIAL HANDLING EQUIPMENT
Clark 7,000 lb. Model C70 LPG Forklift Truck: s/n C70-184-797; with
99” maximum lift, dual mast, solid tires, automatic, safety cage
INSPECTION EQUIPMENT
Co-Check Model 100 Coordinate Measuring Machine: with 10” optical
screen, 10.5” x 12.5” table
Galileo Hardness Tester: s/n 108621
Wilson Rockwell Model 4JR Hardness Tester: s/n 4961
14” Optical Comparator, granite surface plates, height gages, Jo
blocks, pin gage sets, micrometers, V-blocks, etc.
AIR COMPRESSORS
Joy Twistair 10 HP Model TA-010TAN-2C Rotary Screw Tank Mounted
Air Compressor: s/n 138136; with Zurn air dryer, 125 PSI
Joy Twistair 10 HP Model TA-010T2-4 Rotary Screw Tank Mounted Air
Compressor: s/n 92588; with General air dryer, 125 PSI
Crown Electric Hi-Stacker
Rol-Lift 5500 lb. Hydraulic Pallet Jack, Lift-Rite Hydraulic Pallet Jack
TRUCK
1999 Chevrolet 3500 HD Flat Bed Truck: VIN 1GBKC34J8XF018116; with
dual tires on single axle, Monroe Versa-Line 12’ bed, automatic, air
conditioner, approx. 57,000 miles
7
AUTOMOBILE
2002 Mercedes Benz S500 4 Door Sedan: black/black, with sport
package, new Michelin tires, GPS, approx. 65,000 miles
AUCTION
P L A S -TO O L CO.
VERY CLEAN MACHINE & MOLD SHOP
7430 Croname Road • Niles, IL
INSPECTION:
Day before sale from 9:00 a.m. to 4:00 p.m.
and Morning of sale from 8:00 to 10:00 a.m.
INTERNATIONAL AUCTIONEERS, INC.
APPRAISAL SERVICES
If you require a detailed appraisal for banking, insurance, or estate
purposes, consult with the certified appraisers at International
Auctioneers, Inc. We can provide Going Concern, Fair Market or
Liquidation Value appraisals.
We can provide appraisal services for all types of industrial
manufacturing equipment.
Call us in complete confidence with your requirements.
Tel.: 773.864.9775
TERMS AND CONDITIONS
Everything will be sold to the highest bidders for cash, in accordance with the
auctioneer’s customary “Term of Sale,” copies of which will be posted on the
premises, subject to applicable federal, state and local taxes, if any.
A deposit of 25%, by cash or certified check, will be requested on all
purchase with balance immediately following the sale. ONLY CASH, CERTIFIED
CHECK OR CASHIER’S CHECK PAYABLE TO INTERNATIONAL AUCTIONEERS, INC. WILL
BE ACCEPTED. FIRM CHECKS WILL BE ACCEPTED ONLY IF ACCOMPANIED BY BANK
VERIFICATION. No personal checks. A refundable $200.00 deposit required to
register.
Although obtained from sources deemed reliable, the auctioneer makes no
warranty or guarantee, expressed or implied, as to the accuracy of the information
herein contained. It is for this reason that buyers should avail themselves of the
opportunity to make inspection prior to the sale.
WE ACCEPT PROXY BIDS.
EVERYTHING IS SOLD ‘AS IS’ AND ‘WHERE IS’ WITHOUT ANY WARRANTIES,
EXPRESSED OR IMPLIED. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR OF
FITNESS FOR ANY PURPOSE ARE SPECIFICALLY EXCLUDED.
A 12.5% Buyers’ Premium will apply to on site sales.
INTERNATIONAL
AUCTIONEERS,
INCORPORATED
Appraisals • Auctions • Liquidations
8711 West Bryn Mawr • Suite 605 • Chicago, IL 60631
Tel.: 773.864.9775 • Fax. 773.864.9776
www.iaiauctions.com
IL Auction Lic. #441.0000551
Complimentary
refreshments
provided by:
INTERNATIONAL
AUCTIONEERS,
INCORPORATED
Very Clean Machine & Mold Shop
7430 Croname Road • Niles, IL
PLAS-TOOL CO.
8711 West Bryn Mawr • Suite 605 • Chicago, IL 60631
Tel.: 773.864.9775 • Fax. 773.864.9776
www.iaiauctions.com
IL Auction Lic. #441.0000551
INTERNATIONAL
AUCTIONEERS,
INCORPORATED
Appraisals • Auctions • Liquidations
Plas-Tool_8pg:Layout 1
6/4/08
7:32 PM
PRSRT
First-Class Mail
U.S. Postage
PAID
Chicago, Illinois
Permit No. 4184
Page 8