Wan Mazlina Wan Mohamed - Faculty of Mechanical Engineering

Wan Mazlina Wan Mohamed - Faculty of Mechanical Engineering

Wan Mazlina Wan Mohamed
CONTACT
Faculty of Mechanical Engineering
UiTM
40450 SHAH ALAM
Phone (office)
: 03 – 5543 5212
Fax
: 03 - 5543 5160
Phone (mobile)
: 019-3095068
E-mail Address : wmazlina@salam.uitm.edu.my
POSITION
Senior lecturer, Faculty of Mechanical Engineering
Senior Research Fellow, Malaysian Institute of Transport (MITRANS)
FIELD OF SPECIALISATION
Aircraft Maintenance, Aviation Management, Airport Operations
Research Interest







Air Transportation
Airports Operation and Management
Airlines Management
Operations Research
Operations Management
Railway Management
Unmmaned Aerial Vehicle
EDUCATION
Degrees
Airframe & Powerplant FAA
Certificate
Year
1987
University
Parks College of St Louis
University, USA
B.Sc in Aircraft Maintenance
Engineering
1989
Parks College of St Louis
University, USA
B.Sc in Aerospace Engineering
1989
M.Sc in Air Transport Management
1999
Parks College of St Louis
University, USA
Cranfield University, UK
PERSONAL AFFLIATION
Board of Engineers Malaysia
Member of German Aerospace Research Society (GARS)
LANGUAGE
Malay
English
Basic Dutch
WORKING EXPERIENCE
Universiti Teknologi MARA, Faculty of Mechanical Engineering, Shah Alam
Dec 2011 – present
PhD Researcher & Senior Lecturer
Conducting research on regional airport airside operations and analyse the impact on
airport aeronautical revenues and noise. Developing the aeronautical revenue
optimisation model for regional airports. Conduct airport operations (airside and
landside) courses. Teaching Industrial Management (MEM575) course.
Delft University of Technology, Faculty of Aerospace Engineering, Netherlands
Apr 2007 – Jul 2010
PhD Researcher, Air Transport & Operations Dept
Brief experience on low noise, low emission aircraft design. Developed knowledge-base
design technique using Lisp language and GDL software to design airfoil and aircraft
part. Conduct research in regional airport operations. Collaborate with Rotterdam The
Hague Airport, The Netherlands and published several publications regarding the issues
at Rotterdam The Hague Airport. Visited several airports such as Schiphol Airport,
Eindhoven Airport and Dubrovik Airport, Croatia. Conducted several interviews with
Ministry of Transport (Air Regulations), and Airport consultants (ADECS, NACO).
Supervised intern students from Chile and Italy, Masters students’ project and degree
students JAVA programming project in forecasting airport revenues.
Universiti Teknologi MARA, Faculty of Mechanical Engineering, Shah Alam
Jan 2005 – Mac 2007
Head, Aerospace & Materials, Centre of Studies
Teach Aerodynamics, Introduction to Aerospace and Air Transport Management
courses. An Academic Advisor to 24 degree students. Responsible of developing
Aerospace and Material Sciences laboratories, staff training and development, managing
staff teaching hours and expertise, budget allocation, and developing new aerospace
program and curriculum. Supervising final year project students, involved in aerospace
students’ activities, as an advisor to Aero-Model Association, involve in national and
international exhibitions and competitions, and official launching of National University
Games (MASUM06) and organizing the MOU signing ceremony between UiTM and 5
international companies.
Jun 2003 – Dec 2004
Senior Lecturer
Teaching KJT 370 – Lectures in Aerospace and KJT 318 – Aircraft Control Theory for
Diploma in Aerospace Engineering program. Experienced as Internal ISO Auditor and
active member of ISO 9001:2000 working team. Supervised 6 final year students in the
developing the Unmanned Aerial Vehicle (UAV) system and technology. Member of
Research and Consultancy Unit, Faculty of Mechanical Engineering (UPP-FKM).
Experienced in organising seminars and workshops. Been appointed by Ministry of
Science and Technology Malaysia as a Panel in evaluating a project under IGS scheme,
for the research of “Underwater Unmanned Vehicle”. Club Advisor for FKM Aero-Model
Club and UiTM Paragliding Club
Universiti Tenaga Nasional (UNITEN), Mechanical Engineering Department,
Kajang
1 Jun 2001- May 2003
Senior Lecturer
Taught Engineers in Society and Statics courses. Supervising twenty students for final
year projects and been appointed as an Academic Advisor in Mechanical Engineering
Department. Appointed as Industrial Training Coordinator for Mechanical Engineering
Department.
Universiti Sains Malaysia, School of Aerospace Engineering, Tronoh, Perak
14 Oct 1998 –May 2001
Deputy Dean of Post Graduate and Research
Teaching Introduction to Aerospace Engineering, Aircraft Systems, Aircraft
Performance, Basic Management for Engineers, and Remotely Piloted Vehicle courses.
Preparing exams and notes for the courses taught. An Academics Advisors for Aerospace
students, a Coordinator for Industrial Training, Advisor for the Aerospace Clubs,
Member of Bahasa Malaysia Committee, and Member of Engineering Sciences for the
Research Committee. Involved in conducting research in design and development of a
small remotely piloted vehicle (RPV) aircraft for civil use.
AIROD Sdn. Bhd., Subang Airport, Selangor
2 Oct 1989 – May 1993
Aerospace Engineer, Propulsion & Aero-Component Dept.
Conduct the viability study in procuring test equipment such as hydraulic test stand, fuel
pump test stand, and oil pump test stand for the Aero-Component department and
installation of automatic data acquisition system for engine test cells.
May 1993 – Mar 1995
Aircraft Superintendent, Aircraft Maintenance Dept.
In-charge of a RM 40 million project, C130H aircraft crash recovery program. A threeyear project involved of modifications of the C130B nose to fit C130H aircraft,
prefabricated left-hand wing of the C130H aircraft, avionics upgrade and engine change.
In-charge of planning, managing working schedule, procuring spare-parts and
supervising more than 100 technicians from various fields (airframe, powerplant,
avionics, electrical, communications, quality control, purchasing etc).
Mar 1995 – Sept. 1997
Technical Training Manager, Technical Training Dept.
Managing the Technical Training Department with more than 20 instructors in the field
of Airframe, Power Plant, Sheet Metal, Electrical & Electronics, Instruments/Avionics
and Radio & Navigation. Conduct Technical and Quality Awareness Courses to AIROD
Personnel. Managed to secure a RM3 million contracts to conduct Apprentice Training
for the Malaysian Army Air Wings Unit.
A1. TEACHING AND LEARNING
A.1.1 List of Courses Taught
1.
2.
3.
4.
5.
6.
7.
Engineers in Society
Operations Management
Air Transport Management
Airport Operations & Management
Statics
Introduction to Aerodynamics
Introduction to Flights
B. RESEARCH GRANTS
Been awarded IRPA long-term research grant RM134,000 by the Malaysian Ministry of
Science, Technology and Environment (MOSTI) in 1999 (Universiti Sains Malaysia) to
develop a small Remotely Piloted Vehicle (RPV) for civil use (aerial surveillance and
photography) (Project Leader).
Been awarded another IRPA long-term research grant of RM182,000 by MOSTI , for
research in Active Noise and Vibration Cancellation in 2001 (Universiti Tenaga Nasional)
(Project leader).
Received RM40,000 from Universiti Teknologi MARA (UiTM) Institute of Research,
Development and Commercialisation (IRDC) for the research on The Application of
Unmanned Aerial Vehicle (UAV) for Tenaga Nasional Berhad (TNB) High Tension Cable
Inspection (Project Leader).
Received RM35,000 from Universiti Teknologi MARA (UiTM) Institute of Research,
Development and Commercialisation
(IRDC) for the research on Design and
Development of Unmanned Aerial Vehicle for Crop Spraying (Project Leader)
Received RM20,000 from Universiti Teknologi MARA (UiTM) Institute of Research,
Development and Commercialisation (IRDC) for the research on The Performance
Analysis of a One stage Solid Propellant Rocket. (Project Leader).
Received RM39,000 from Universiti Teknologi MARA (UiTM) for the research on
‘Development of Hybrid Vehicle’ (project member).
Research member for the research on ‘Process management and Strategic Human
Resources process measurement in Lean Implementation’. Received RM 32,000 from
Research Intensive Fund (RIF) in Jun 2012.
Project leader for the research on ‘Compressive Properties of a Novel Fibre Reinforced
Polymer composite Laminates’. Received RM32,000 from Research Intensive Fund (RIF)
in Aug 2012.
Project leader for the research on “Characterisation of Air Traffic Movements Behaviour
and Risk Factors”. Received RM128,400 from FRGS (1 Dec 2014 – 30 Nov 2016)
Research member for the research on “Assessing Mental Workload Associated with Air
Traffic Control Activities”. Received RM80,000 from RAGS (1 Dec 2014 – 30 Nov 2016)
C. PUBLICATION
1. B. Basuno & W.M. Mohamed, “The Aerodynamic Design of a Prototype Remotely
Piloted Vehicle (RPV) With 5kg Payload” – Unmanned Air Vehicle Systems 16th
International Conference, Bristol, UK., April 2-4, 2001 (Presenter).
2. W.M. Wan Mohamed and M.J. Zulkifli, “Eagle 150 – Malaysia Aerial
Reconnaissance UAV” – Unmanned Air Vehicle Systems 17th International
Conference, Bristol, U.K., 8-10 April 2002 (Presenter).
3. Wan Mazlina Wan Mohamed, “The Evaluation of Vehicle Free Ramps Airport”,
National Aerodynamics Conference, School of Mechanical Engineering, Universiti
Sains Malaysia, 27 December 2001 (Presenter).
4. Cosmas Pandit Pagwiwoko and Wan Mazlina Wan Mohamed, “Aero-Elastic
Vibration Analysis of Long Span Flexible Wing,” 2nd World Engineering Congress,
Kuching, Sarawak, Malaysia, 22-25 July 2002.
5. Faris Torlachan, Wan Mazlina Wan Mohamed and Julaidi Rasidi, “Stiffness
Behaviour of Composite Laminate Using two Different Hand Lay-up Methods: A
Qualitative Study,” 4th International Materials Technology Conference and
Exhibition (IMTCE 2004), Kuala Lumpur, Malaysia, 23-26 March 2004.
6. Wan Mazlina Wan Mohamed and Valliyappan D. Natarajan, “Utilisation of
Working Models to Enhance the Learning of Lectures in Aerospace Course,”
International Conference on University Learning and Teaching (InCULT 2004),
Shah Alam, Malaysia, 27-28 July 2004. (Presenter)
7. Valliyappan D. Natarajan, Wan Mazlina Wan Mohamed & Jamaluddin Mahmud,
“An Effective Approach to the Teaching and Learning of Engineering Mechanics,”
International Conference on University Learning and Teaching (InCULT 2004),
Shah Alam, Malaysia, 27-28 July 2004.
8. W.M. Wan Mohamed & Z.A.K. Baharin, “High Tension Cable Inspection using
UAV,” Unmanned Air Vehicle Systems 20th International Conference, Bristol, U.K.,
11-13 April 2005 (Presenter).
9. Wan Mazlina Wan Mohamed & Zainal Abidin Kamarul Baharin, “The
Application of Unmanned Aerial Vehicle for TNB High Tension Cable Inspection”,
Conference on Scientific & Social Research (CSSR) 2005, Kuala Terengganu,
Malaysia, 10-12 June 2005.
10. Wan Mazlina Wan Mohamed, “Current Job Requirements and Research
Prospects in Aviation and Aerospace Engineering Fields”, Keynote Speaker, FKM
Colloquium Series 2005, UiTM Shah Alam, Malaysia, 1 September 2005.
11. Wan Mazlina Wan Mohamed, “UAV for Civil Applications”, Langkawi
International Maritime and Aerospace Exhibition (LIMA 2005), Langkawi,
Malaysia, 8 December 2005.
12. Wan Mazlina Wan Mohamed, Poster Presentation – “Parametric Shape
Modeling for An Aerodynamic Initiator using Knowledge Based Engineering” –
PHD Symposium Delft University of Technology, The Netherlands, 18 December,
2007
13. Dave Cooper, Michel van Tooren and Wan Mazlina Wan Mohamed – “Keys to
Success with Knowledge-based Technique”, SAE 2008 Wichita Aviation
Technology -Congress & Exhibition (WATC), Century II Convention Center,
Wichita, Kansas, USA, 19-21 August, 2008,.
14. Dave Cooper, Michel van Tooren and Wan Mazlina Wan Mohamed – Aircraft
Design Process, Software Book (Book Chapter) – ISBN Number: 978-0-76802057-1, Date Published: August 2008 - “Keys to Success with Knowledge-based
Techniques”,
15. Wan Mazlina Wan Mohamed – “Sustainable Regional Airport Infrastructure
Design and Operations Planning for the Future” – ADIO PhD Afternoon, Delft
University of Technology, The Netherlands, 21 November 2008.
16. Wan Mazlina Wan Mohamed, Richard Curran, Frank van der Zwan and Steven
van der Kleij, “Evaluating the impact of noise constraints on regional airport
capacity and economics: The case of Rotterdam Airport, The Netherlands”, GARS
Workshop - Airport and Environment, Bremen, Germany, 5-7 July, 2009
17. Wan Mazlina Wan Mohamed, Richard Curran, Frank van der Zwan and Paul
Roling, “Modeling the Effect of Night Time Penalties on Commercial and Business
Flights for Regional Airport Noise and Business Flights for Regional Airport Noise
and Economics: Rotterdam Airport Case Study”, AIAA ATIO/ANERS Conference,
Hilton Head, S.C, U.S.A., 21-23 September, 2009. art. no. 2009-7086 {SCOPUS}
18. Wan Mazlina Wan Mohamed, “The Value of Noise at Regional Airports - The
case of Rotterdam The Hague Airport”, Leonardo Times – Journal of Society of
Aerospace Engineering Students, TU Delft, The Netherlands, Mac 2010
19. Wan Mazlina Wan Mohamed, Richard Curran, Ahmed Jaffar, and Adibah Shuib,
“Evaluating the Effect of Noise Restriction on Airport Economics: Rotterdam
Airport Case Study ”, International Conference Advances in Mechanical
Engineering (ICAME 2010), SACC Shah Alam, Selangor, Malaysia, 2-5 December,
2010.
20. Wan Mazlina Wan Mohamed, Ahmed Jaffar and Adibah Shuib, “Towards the
Development of Airport Operation Value Model using Bayesian Networks
Approach”, 15th Annual Air Transport Research Society (ATRS) World
Conference, Sydney, Australia, 29 Jun – 2 July, 2011.
21. Aidah Jumahat, Nurulnatisya Ahmad, Wan Mazlina Wan Mohamed, “Fracture
Toughness of Nanomodified-Epoxy Systems”, Journal of Applied Mechanics and
Materials, Volume 393, page 206- 211, 2013.
22. Wan Mazlina Wan Mohamed, Ahmed Jaffar and Adibah Shuib, “Influential
Variables Inducing Aeronautical Revenues at Regional Airports”, International
Conference on Advances in Mechanical Engineering 2015 (ICAME 2015), 26 – 27
August 2015, Bali, Indonesia.
D. CONFERENCES AND SEMINAR
Nama kursus
Tarikh
Air Transport & Airport
Management Seminar
Bengkel permurnian
Module MAHB
12 Feb 2014
Perutusan Naib Canselor
19 Feb 2014
Bengkel permurnian
module MAHB
Professional Talk Series –
Tun Dr. Mahathir
Case writing workshop
FYP Report Workshop
Airport Management
Issues For Academic
Research
Workshop on
Optimisation with
MATLAB
CDIO Workshop
Tempat
Masa
8.00 a.m –
5.00 p.m
9.00 a.m –
6.00 p.m
UiTM
Sama Sama
Hotel, KLIA
Hotel Grand
Bluewave,
Shah Alam
DATC, UiTM
20-21 Feb
2014
12 Mar 2014
MITRANS &
MAHB
UiTM
Sama Sama
Hotel, KLIA
DATC, UiTM
26 – 27 Mar
2014
9 Apr 2014
MiTRANS
FKM, UiTM
UiTM Puncak
Alam
Level 7, FKM
20 – 21 Jun
2014
MiTRANS &
MAHB
Sama Sama
Hotel, KLIA
25 -26 Jun
2014
FSKM UiTM
FSKM, UiTM
8.00 a.m –
5.00 p.m
10 Oct 2014
FKM, UiTM
FKM, UiTM
9.00 a.m –
17 Feb 2014
Nama
Penganjur
MiTRANS &
MAHB
MiTRANS &
AAGBS, UiTM
8.00 a.m –
5.00 p.m
9.00 a.m –
5.00 p.m
2.30 p.m –
5.30 p.m
8.00 a.m –
5.00 p.m
2.30 p.m –
5.00 p.m
8.00 a.m –
5.00 p.m
Talk on Engineering Code
of Ethics by IEM
Industry Outreach
Program
OPAL Talk
29 Oct 2014
FKM, UiTM
FKM, UiTM
5 Nov 2014
FKM, UiTM
FKM, UiTM
17 Dec 2014
FKM, UiTM
FKM, UiTM
The Way Forward
17 Dec 2014
FKM, UiTM
FKM, UiTM
BEM Code of
Ethics/Regulations
Course
9 & 10 Mac
2015
IEM
IEM Training
Centre, PJ
5.00 p.m
8.00 p.m –
10.00 p.m
8.00 a.m –
5.00 p.m
9.00 a.m –
12.00 p.m
2.30 p.m –
5.00 p.m
8.00 a.m –
5.00 p.m
BEM Engineering
Management Practice
16 & 17 Mac
2015
IEM
IEM Training
Centre, PJ
8.00 a.m –
5.00 p.m
BEM Safety & Health at
Work
23 & 24 Mac
2015
IEM
IEM Training
Centre, PJ
8.00 a.m –
5.00 p.m
ICAME 2015
26-27 Aug
2015
FKM, UiTM
Bali,
Indonesia
8.00 am –
5.00 pm
E. CONSULTANCY
Professional services for KL Airport Services on the project “Transforming and
Positioning the LCCT Sepang to be Global Logistic Hub in Region” under MITRANS. Cost
of project RM80,000.00 (9 Nov 2014 – 9 Nov 2015)
F. AWARD/RECOGNITION AND APPRECIATION
Servisair Prize – Best M.Sc Thesis for Airport Category, Cranfield University, U.K, 1998
M.Sc Research Title – “The Advantages & Disadvantages of Vehicle-Free Ramp
Airports”
Gold Medal, for “Environment Friendly Low Cost Liquid Propellant Rocket Engine
for Sattelite Launch Vehicle”, at the Inventions, Innovations and Design (IID 2006)
Exhibition, organized by UiTM, 19-20 January, 2006
Bronze Medal, for “Performance Analysis of a Single Stage Solid Propellant
Rocket”, at Malaysia Technology Expo 2006 (MTE 2006), organized by Malaysia
Association of Research Scientist (MARS), PWTC, Kuala Lumpur, 23-25 February, 2006
Bronze Medal, for ‘Environmental Friendly Low Cost Liquid Propellant Rocket
Engine’, at 17th International Invention, Innovation, Industrial Design & Technology
Exhibition (ITEX’06), organized by MINDS, Kuala Lumpur Convention Center, 19-21
May, 2006.
Gold Medal, for “Low Cost Solid Propellant Rocket”, at Brussels-Innova/Eureka
exhibition, Brussels, Belgium, 23 -27 November 2007.
Silver Medal for “Environmentally Friendly Low Cost Liquid Propellant Rocket” at
at Brussels-Innova/Eureka exhibition, Brussels, Belgium, 23 -27 November 2007.
UiTM and Bank Rakyat Award - Inventions, Innovations and Design (IID 2007) –
3rd category for lecturers – Cash RM2, 000, January 2007.
Best Paper Award for “Influential Variables Inducing Aeronautical Revenues at Regional
Airports”, International Conference on Advances in Mechanical Engineering 2015
(ICAME 2015), 26 – 27 August 2015, Bali, Indonesia.