2016 Mopar Catalog - Classic Industries

Transcription

B&M Transmission Products
Fifty Years of Expertise!
Pour-in Performance!
Trick Shift™ was originally
developed by B&M for racing
applications. It’s become
so successful that it’s
the most popular high
performance fluid on
the street also! Not
an additive, this is
the best performance
ATF available! A
scientific blend of
foam inhibitors,
pressure agents and
shift modifiers that
will provide extended
transmission life and
drastically improved
shift feel. Trick Shift™
is the easiest way to
measurably improve
the transmission
performance of
your vehicle. Trick
Shift™ works with all
automatic transmissions when a firmer shift is
desired. “Pour in Performance” isn’t just a catchy
phrase - it’s reality! It can be mixed with stock-type
transmission fluids, however to attain maximum
improvement you should use Trick Shift™
exclusively. Ideal for towing, light trucks and RV
applications as well as racing.
Important: Not recommended for
electronically controlled automatic
transmissions.
Note: No further discounts apply.
223040 Original Trick Shift™ - 1 qt ....... 5.99 ea
Buy a Case & Save 11.45!
223041 Original Trick Shift™ - 12 qts ... 75.99 cs
B&M has been building extreme duty transmissions for 5 decades. From the famous B&M
Hydrostick of the 50’s to the Torkmasters and Clutchflites of the 60’s, B&M transmissions
are unequalled in quality, features, or durability and is the standard to which all performance
automatics have been measured.
Note: All transmissions are special order and must be pre-paid. No further discounts apply.
Street/Strip TF-727
B&M’s Street/Strip Transmission is a complete ready to run unit (less converter) designed to offer exceptional
performance on the street and stand up to mild drag strip use. Provides firm shifts and features a standard shift
pattern.
Torqueflite 727
Key Features:
• 2:45 first gear ratio, 1:45 second gear.
Rebuilt front pump
• Five clutch direct drum
• New low roller clutch
• B&M 5.0 servo lever
• Four pinion front carrier
• All new B&M high performance
friction plates
• Performance Frictions
• New special bellville spring
• Fully re-calibrated valve body
Important: Transmissions shipped truck freight.
MN2369
MN2370
MN2370
Street/Strip, 273-360..................................................................................................... 1289.99 ea
Street/Strip, 361-440..................................................................................................... 1914.99 ea
HoleShot For Small Block & Big Block Applications!
M
Transmission, Shifters & Clutch
Formulated For Late Models!
B&M’s Synthetic Trick Shift™
is suitable for all automatic
transmissions including late
model electronic controlled
transmissions. Formulated
as a performance
automatic transmission
fluid, it features the
latest synthetic fluid
technology. Not an
additive, this safe
and effective formula
of extreme pressure
agents and foam
inhibitors provides a
long service life for
your transmission.
Ideal for street use
and high performance
applications including
racing, off-road, towing and heavy duty fleet use.
Synthetic Trick Shift™ may be mixed with all other
types of ATF but works best by itself.
Key Features:
• Cool blue color
• Latest synthetic fluid technology
• Excellent when installing all B&M transmission
kits
• Mixes with other types of automatic transmission
fluids
• Formulated for late model vehicles
• Suitable for racing, street performance, towing and
off-road applications
• Easy pour quart bottles
• Meets or exceeds Mercon or
Dexron III
requirements.
223042 Synthetic Trick Shift™ - 1 qt .... 9.99 ea
Buy A Case & Save 15.45!
223043 Synthetic Trick Shift™ - 12 qts 113.99 cs
486
The HoleShot converter delivers a higher stall speed, providing
several advantages and benefits in vehicles with modified
engines. Big cams in particular tend to reduce low end
power and torque. A high stall converter allows the engine
to launch the car at higher rpm where more torque is
available. The HoleShot is designed for street and mild
strip use, offering better, stronger launches. Street rods
with modified engines will also benefit from a HoleShot
converter. Not recommended for use engines equipped
with nitrous oxide. Stall speed listings are based on engines
producing 230lb. ft. of torque at 2,500 rpm. More torque
at 2,500 rpm will give you a higher stall speed, less torque
at 2,500 rpm will give you a lower stall speed than the stall
speed ratings indicated.
HoleShot 2400
2300-2500 RPM Stall Speed
MN3011
TorqueFlite A-727........................................................................................................... 344.99 ea
HoleShot 3000
MN3012
TorqueFlite A-727........................................................................................................... 574.99 ea
Tork Master for Mild Performance Small Blocks!
Similar to the HoleShot series, the Tork Master is
B&M’s is an excellent all-around performance street
converter for small block Mopar. One of the best
“value priced” street converters available, the Tork
Master converter features a new precision pump
drive tube, is fully balanced and pressure tested
for reliability. It also features a new thrust washer
between the turbine and cover when required and
need thrust bearings when factory equipped. The Tork
Master torque converter is not recommended for
big block or supercharged applications.
Note: No further discounts apply
Tork Master™ 2400
MN3013
TorqueFlite A-727........................................................................................................... 254.99 ea
Toll Free Order Line 800.854.1280
B&M Transmission
In A Box!
MN2365
Provide Crisp Shifts And Eliminate Slippage
Without Removing Your Transmission!
The B&M Shift Improver Kit is the easiest way to get
stout performance out of your automatic transmission.
Choose from the Heavy Duty Stage 1 kit, and the Street/
Strip Stage 3. All you need are a few hand tools! In the
space of an afternoon, you can turn your transmission
into a B&M-tuned unit!
Stage 1-Heavy Duty
Firm, positive shifts without loss of driver comfort
for improved performance in all street vehicles.
Recommended for regular passenger vehicles.
Stage 2-Street/Strip
Provides very positive shifts for high performance
street use or for competitive events. This model is
for the enthusiast who wants the hardest, quickest
possible shift.
Key Features:
• Provides crisp shifts on any stock automatic
transmissions.
• Elimination of soft sluggish shifts, shift overlap,
and excess wear on clutches and bands due to
slippage.
• Improves transmission life.
• Transmission removal not required.
This is the most
comprehensive kit
available, with parts
or necessary part
numbers to upgrade
your Chrysler
Torqueflite A-727 into
a true performance
transmission. Comes
with instruction sheets
that provide the do-ityourselfer with all the
information needed to
completely overhaul a
A-727 to B&M specs.
Easy to understand
even if you have no
experience in this
area!
AR1447
Mopar Torque Converter Bolt Sets
You can forget about shearing a torque converter bolts
after you install these fasteners rated at 200,000 PSI.
Each set is specifically designed for each application to
provide optimum grip. Kits include hardened parallelground washers. Made in USA.
TorqueFlite 727 & 904
AR1447 w/stock converter................... 7.99 set
AR1448 w/aftermarket converter......... 11.99 set
NAG1 5-Speed Automatic
AR1449 w/stock converter................... 19.99 set
Note: No further discounts
apply.
Key Features:
• B&M Street/Strip Transmission components in a do-ityourself kit.
• Transpak modification components including special
replacement valves and springs.
• Includes all necessary parts, springs, plates, etc.,
to convert your valve body to a full B&M Manual/
Automatic valve body.
• Improved shift feel, retains full automatic features.
• B&M high performance friction materials.
• Complete overhaul gasket set & Drain
plug
MN2368 1970-76 A-727..................... 339.99 set
MN2365
MN2365
MN2365
MN2366
MN2366
1966-70
1966-76
1968-70
1971-76
1971-76
A-727.......................
A-904 w/6 cylinder .
A-904 w/V8 .............
A-727.......................
A-904 w/V8 .............
41.99
41.99
41.99
41.99
41.99
set
set
set
set
set
223204
B&M Replacement Adapters & Filter
B&M extra capacity deep pans come with an adapter
to make sure the filter is located at the proper depth
in the transmission pan.
The Transpak has all the features of the Shift Improver
Kit, plus additional driver control (Chrysler Torqueflite
only). Most stock automatic transmissions won’t
downshift into low gear above 15 mph, and upshift
at a set speed no matter what gear you’re in. With the
Transpak, you can downshift at any speed and hold the
transmission in first gear to any speed! Two sets in one
allow you to choose your level of performance. Includes
B&M performance friction materials,
complete overhaul gasket set, B&M Transpak
valves, springs, and components drain plug.
Stage 1 Heavy Duty
For street rods, normal passenger vehicles and
heavy duty use. Firmer shift feel but not harsh.
Improves transmission performance and life
dramatically without loss of comfort. Normal
automatic operation when in “Drive.”
Stage 2 Hi-Performance Street
For performance street use. Essentially the same
as Heavy Duty mode except shift is much quicker.
Retains full automatic features and
standard shift points with selector in
“Drive.”
This B&M cast aluminum deep pan adds an additional
4 quarts of fluid capacity. Lower temperatures along
with proper maintenance will extend the life of your
automatic transmission. Features built-in drain plugs,
includes filter adapter, requires no modification to
the dipstick. Fits Chrysler TorqueFlite A-727 & 518.
MN2367 1966-76 A-727, A-904 ......... 99.99 set
MN3010
Flexplate Bolt Sets
You can forget about shearing a flexplate bolts after you
install these fasteners rated at 200,000 PSI. Each set is
specifically designed for each application to provide
optimum grip. Kits include hardened parallel-ground
washers. Made in USA.
Slant Six, Small Block & Big Block
AR1444 6 bolt crank............................... 14.99 set
AR1445 8 bolt crank............................... 34.99 set
5.7L, 6.1L & 6.4L Hemi
AR1446 .................................................. 44.99 set
B&M Flexplates for
Mopar Transmissions
These SFI-approved
B&M flexplates are
manufactured to precise
tolerances to ensure the
flexplate center will
not explode at high
RPM. Dual bolt patterns
accommodate a variety of
transmission applications.
Note: *Big blocks with cast crank are externally balanced.
No further discounts apply.
B&M Cast Aluminum Transmission Pan
A-727 & 518 ........................ 169.99 ea
Key Features:
• SFI spec 29.1 approved
• NHRA/IHRA legal
• SFI spec 29.1 certification
• sticker included
• Ideal for street applications to extreme duty
racing and high RPM use, above 6,000 RPM
• Dual bolt pattern (10" & 11-1/8") on A-727
flexplates.
TorqueFlite A-727
Small Block
MN3015 1962-92 273-318, 6-bolt crank.... 101.99
MN3016 1962-92 273-318, 8-bolt crank.... 101.99
MN3021 1971-76 340 ................................ 99.99
MN3019 1971-92 360............................ 101.99
Big Block*
MN3015 1962-78 internally, 6-bolt crank .. 101.99
MN3016 1962-78 internally, 8-bolt crank .. 101.99
MN3017 1971-78 externally balanced ...... 101.99
TorqueFlite A-904
MN3016 1962-92 273-318, 8-bolt crank... 101.99
MN3018 1971-92 360 ............................ 101.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
487
Transmission, Shifters & Clutch M
Recalibrate Your Transmission
for Optimum Performance
Replacement Adapters
MN3022 A-727 ....................................... 49.99 ea
Replacement Filter for B&M Pans
223204 A-727 ....................................... 15.99 ea
AR1444
Performance Transmissions
MN2506
MN2509
1 year warranty from day of use
New clutches, steels, seals & gaskets
Updated boost valve system
New overdrive & lower roller sprag
Updated servo piston
Hardened forward clutch hub
300M billet input shaft
Updated shift valve springs
Wide kickdown band
Electronic speed sensor
New valve body separator plate
Better lubrication system
All new Torrington bearings
All new thrust washers
New fill tube and indicator
Energy suspension trans mount
Custom billet stall converter
Bowler dependability & durability
1 year warranty from day of use
New clutches, steels, seals & gaskets
Updated boost valve system
Updated lower roller sprag
Heavy Duty reverse band
Blue printed pump
Updated shift valve springs
New bushings
New valve body separator plate
All new Torrington bearings
All new thrust washers
Shallow steel pan
New fill tube and indicator
New transmission mount
Custom billet stall converter
Bowler dependability & durability
Bowler Custom Torque-Flite 727 High Performance Transmissions
Get the right transmission the first time! Bowler transmissions are built to order,
customized to your vehicle specifications. Unlike assembly-built transmissions,
every bowler transmission is built by a qualified individual technician, then dyno
tested before being packaged and shipped. Bowler has been building transmissions
since 1963 and knows what it takes to meet the demands of your vehicle. Allow 4
to 6 weeks for your custom transmission to be built.
Note: Shipped truck freight, No further discounts apply.
Bowler Custom 4L80E High Performance 4 Speed AT for Mopar
If your Mopar produces 650 to 1000 ft lbs of torque, you need a Bowler custom
4L80E performance transmission. Bowler transmissions are built to order, tailored
to your specifications, and unlike assembly-built transmissions, every Bowler unit
is built by an individual technician start-to-finish and dyno tested before shipping.
Includes bellhousing, flexplate, converter, computer and accessories. Does not come
with driveshaft or crossmember. Modifications may be needed for fitment. Please
allow 4 to 6 weeks for your custom transmission to be built.
MN2506
MN2507
MN2508
1960-76
1960-76
1960-76
TF-727 rated at 375 ft lbs torque ................ 2599.99 ea
Performance Automatic Racing Street Smart Transmissions
Note: Special order, must be pre-paid. Shipped truck freight.
No further discounts apply.
M
MN2509
MN2510
MN2511
1960-76
1960-76
1960-76
4L80E rated at 650 ft lbs torque ................. 7699.99 ea
4L80E rated at 800 ft lbs torque ................. 8419.99 ea
4L80E rated at 1000 ft lbs torque ............... 9115.99 ea
MN2372
MP800115
A&A Restoration Transmissions
A&A has long been recognized for its quality transmission rebuilds. They offer basic
rebuilt restoration style transmissions. Features: Blasted and prepped case, bolt-in
sprag, 3- or 4-pinion aluminum planetaries that use stock thrust washers, stock ratio
is 2.45/1.45/1:1, reconditioned front pump and support, A&A modified valve body.
727 Transmission
MP800115 1966-76
MP800113 1966-76
904 Transmission
MP800116 1966-76
488
small block.................................................. 1885.99 ea
big block ..................................................... 1885.99 ea
small block.................................................. 1625.99 ea
11" 2400-2800 stall torque converter
Dipstick with tube
Transmission mount
Alto racing clutches
High performance bands
Transgo shift kit
Heavy duty intermediate sprag/race
Chrysler A-904 and A-727 transmissions have been the backbone of Chrysler for
over 40 years. These Performance Automatic Racing Street Smart transmissions
units get a deep sump pan, a thorough rework, and complete dyno testing to handle
high levels of horsepower. Backed by a lifetime warranty.
Note: Shipped truck freight. No further discounts apply.
MN2371
MN2372
MN2373
A-904
A-727
A-727
400 hp, with steel pan ................................. 1914.99 ea
600 hp, small block, with aluminum pan.... 2104.99 ea
600 hp, big block, with aluminum pan ....... 2319.99 ea
Optimal for Engines Making Up To 450hp!
MN2408
MN2410
TCI Automatic Transmissions
The TCI StreetFighter transmission is strong enough to withstand the rigors of even the toughest street machines.
It is ideal for use with non-supercharged engines producing 450 horsepower using pump gasoline. Each TCI
transmission is triple tested.
Note: Shipped truck freight. No further discounts apply.
Small Block
MN2408
A-727
MN2409
A-904
Big Block
MN2410
A-727
318, 340 & 360, with 18-3/8" tailshaft ....................................................... 1299.99 ea
318, 340 & 360 ........................................................................................... 1299.99 ea
383, 400, 426 and 440, with 18-3/8" tailshaft ............................................ 1299.99 ea
Royal Purple Max ATF
Max ATF is a synthetic, highperformance, automatic
transmission fluid. Its
low co-efficient of
friction and high
film strength help
to dramatically
reduce heat and
wear. Additionally,
Max ATF is
more oxidation
stable than other
transmission fluids
for longer fluid
life. Max ATF is
recommended for
a wide variety of
transmissions. Max
ATF significantly
reduces heat to
extend the life of
your transmission.
Automatic
transmissions generate a great deal of heat and
depend upon the transmission fluid for cooling and
protection. Max ATF is fully compatible and can
be mixed with other automatic transmission fluids;
however, for the best results drain or flush the
current oil and then fill with Max ATF.
RP01320 quart ..................................... 15.99 ea
RP12320 case of 12 quarts .................. 172.99 cs
No More Messy Oil Splash!
Only a few
automatic
transmissions are
equipped with drain
plugs from the
factory, but you can
install one yourself
very easily. Simply
remove the pan
once, drill a hole,
bolt the B&M drain
plug kit in, and
eliminate messy oil
splash forever. Non
magnetic. Universal fit.
223300
drain plug ...............................
9.99 ea
1745000
Gear Vendors Under/Overdrive
Give your Mopar vehicle up to twice the forward gear ratios with the Under/Overdrive auxiliary transmission
from Gear Vendors. This supplemental planetary gearbox adapts to the output shaft of your existing transmission
to provide an extra gear of 0.78:1. The initial benefit is the addition of a 22% overdrive in high gear, but because it
can be engaged in any gear, it doubles the number of ratios available in any transmission. Increase fuel economy
and use your engine's power more efficiently!
Note: Special order, must be prepaid. Shipped truck freight. No further discounts apply.
A 833 Manual transmission
MN2404
with 18" tailhousing......................................................................................................
A 904 Automatic transmission
MN2405
A 727 Automatic transmission
MN2406
with 8" tailhousing........................................................................................................
MN2407
2894.99 ea
2794.99 ea
2794.99 ea
2794.99 ea
Reduce the Chance of Rolling the Lights &
Produce More Effective Burn Outs with the
original Hurst Roll/Control!
Used primarily in drag racing to provide positive
locking action to the front wheels of race cars. In tests,
the Hurst Roll/Control has proved a 1/100,000 of a
second release time and vibration tests have seen up
to 30 G’s applied without mechanical
failure.
1745000
5671510
Hurst Roll/Control set ........... 114.99 ea
installation set ....................... 44.99 set
489
MN2404
Transmission Oiling Parts
MD2550
223309
1962-76 Transmission Dust Shield
Transmission dust shield for small block, big
block models equipped with a 727, 904 automatic
transmission. This part bolts to the transmission
bellhousing to prevent debris from entering the torque
converter area. Bolts are black phosphate and sold
separately.
Note: Depending on starter some modifications may be
necessary.
Transmission Dust Shields
MD2550 1962-76 small block, 727 .
MP800117 1962-76 big block, 727 .....
MP800118 1966-76 small block, 904 .
Dust Shield Bolt Sets
MP800120 1962-76 SB, 727/904 ........
MP800119 1962-76 big block, Hemi ..
20.99 ea
51.99 ea
45.99 ea
Transmission Oil Cooler/Filter
This automatic transmission oil cooler and filter
combination assembly uses a finned aluminum heat sink
design to dissipate heat in racing applications. It can
also be used as an inline auxiliary cooler in conjunction
with the stock cooler. It's compact one pound 3" x
12" aluminum body gives it excellent heat transfer
capabilities. An internal filter with magnet traps particles
over 5 microns to reduce transmission wear. Includes
filter cartridge and two 1/4" NPT to 3/8" line fittings.
241200
................................................. 99.99 ea
17.49 set
22.99 set
B&M Transmission Super Cooler
B&M SuperCoolers are constructed from 100%
aluminum using sandwiched stamped plates. The
Super-Coolers intended for automatic transmission
fluids and offers an additional feature known as “Low
Pressure Drop”. A unique bypass feature allows a
viscosity-controlled amount of ATF to bypass the
cooler when the fluid is cold. Fluid is returned directly
to the lube circuit through bypass openings in the core.
As the temperature increases, more ATF is directed
through the core. This highly efficient design provides
improved protection against lube system failure in cold
climates. Includes installation kit.
223309
223310
223311
11" x 6" x 1-1/2" ..................... 94.99 ea
11" x 7-1/2" x 3/4" .................. 79.99 ea
11" x 5-3/4" x 3/4" .................. 74.99 ea
1962-76 A-727 Chrome Transmission Pan
Replacement chrome transmission pan for all 727
automatic transmissions. Includes drain plug.
MD2537 1962-76 chrome pan ......... 31.99 ea
Heavy Duty Transmission Oil Cooler
This high performance transmission oil cooler features
an heavy duty 7-1/2" x 20" x 3/4" core for extreme
conditions. Comes complete with all hardware, hoses,
fittings, adapters and vinstructions. Made in USA.
FL4120
universal .............................. 54.99 ea
M
MD2549
A-727 Cast Aluminum Transmission Pan
These cast aluminum pans for A-727 automatic
transmission are 2" deeper than stock and made without
the drain plug, as original, to prevent changing the
transmission fluid without changing the filter. Available
as cast or with a polished finish. Made in the USA.
MN2504 1960-76 as cast ................. 229.99 ea
MN2505 1960-76 polished .............. 285.99 ea
FTM180
Transmission Pan FilterMag
FilterMag’s powerful rare-earth magnets trap and hold
wear inducing metal particles smaller than 40-microns
down to 1-micron that the filter cannot stop. The superstrong magnetic force holds FilterMag to a steel trans
pan, is reusable, and will reduce maintenance costs
by extending the life of your oil. The super-strong
automatic transmission FilterMag mounts to the outside
bottom of the pan and will keep metal particles from
harming your transmission.
FTM180
2.93" x 1.93" ........................ 34.99 ea
FTM360
3.18" x 2.93" ........................ 59.99 ea
490
B&M Hi-Tek Transmission Cooler
The Hi-Tek automatic transmission cooler is perfect for
demanding street/strip and even towing applications.
At 175°, a thermal switch activates the high-flow 12
volt 7" electric fan. Durable, oven brazed aluminum
construction promises years of performance. The 1/2"
NPT fittings are easily adaptable to AN fittings and
steel-braided cooler lines, or can be used with standard
rubber or steel lines. Measures 10" x 7-1/2" x 4" and
includes electrical connectors and detailed instructions.
1962-76 Automatic Dipsticks & Tubes
Replacement transmission dipsticks and tubes for
1966-76 727 and 904 automatic transmissions. Your
choice of black powdercoated, locking with zinc finish,
or locking with chrome finish. Includes tube, dipstick
and o-ring. Made in the USA.
70298
................................................ 291.99 ea .
Note: *Fits RH side of head.
Black Powdercoated - Non-Locking
MP800111 1967-69 big block w/727 ..
MP800102 1970-71 big block w/727 ..
MD2549 1966-71 Hemi w/727 ........
Zinc - Locking
MP800103 1962-76 big block w/727 ..
MP800104* 1966-76 Hemi w/727 ........
MP800105 1966-76 small block w/727
MP800106 1966-76 small block w/904
Chrome - Locking
MP800107 1962-76 big block w/727 ..
MP800108* 1966-76 Hemi w/727 ........
MP800109 1966-76 small block w/727
MP800110 1966-76 small block w/904
69.99 set
69.99 set
59.99 set
55.99
55.99
55.99
55.99
set
set
set
set
79.99
79.99
79.99
79.99
set
set
set
set
1966-70 Transmission Cooler Brackets
Replacement transmission cooler mounting bracket set.
This set mounts the transmission cooler to the radiator
and grill support on 1966-70 vehicles equipped with a
Hemi engine and an automatic transmission.
MD2547 1966-70 two piece set ....... 42.99 set
1960-74 Dipstick O-Ring
1962-74 Transmission Cooler Line Bracket
Original style automatic
transmission dipstick components. MD2553
MD2553 1960-74 O-ring ................. 2.99 ea
This stainless steel bracket mounts to the bellhousing
and keeps the transmission cooler lines in place.
MD2546 1962-74 all models ........... 18.99 ea
Automatic Transmission Parts
Auto Transmission Cooler Lines
Correct replacement transmission
cooler lines which run from the
transmission to the radiator. Choose
between OEM-style galvanized
steel lines or long lasting stainless
steel which will not rust. Each
transmission line is meticulously
produced to original specifications
for a and guaranteed perfect fit!
Replace Your Transmission Cooler Lines With OEM
Material For Originality Or High Quality, Long Lasting,
Stainless Steel!
1963-75 A-Body Transmission Cooler Lines
Each line is produced using a precision manufacturing process that
creates the correct bends that match factory original equipment.
Couple meticulous manufacturing techniques with choice material
selection and you can be sure that you are installing the best
transmission cooler lines on the market. These lines, produced in
your choice of original material or never-rust stainless steel, will
fit your A-Body application and save you the hassle of bending
up your own lines. Applications available for a variety of A-Body
vehicles including 1964-69 Barracuda, 1963-75 Dart, Valiant and
1970-75 Demon/Dart Sport, Duster and Scamp.
Original Material - A-Body
MA3449M
MA3450M
MA3451M
MA3452M
MA3453M
MA3454M
MA3455M
MA3456M
MA3457M
MA3458M
MA3459M
1963
1964-68
1964-66
1967-69
1969-75
1967-72
1969-71
1969-72
1972-73
1974
1975
904 (3 line set) ..............................................
Slant 6 w/904 ................................................
w/V8..............................................................
727 w/loop 12" from radiator........................
Slant 6 w/904 ................................................
318 w/904......................................................
340 ci w/727..................................................
727 w/loop near radiator ...............................
340 w/727......................................................
Dart, 318 w/904 ............................................
Swinger .........................................................
Stainless Steel - A-Body
44.99
39.99
39.99
39.99
39.99
39.99
39.99
39.99
39.99
39.99
44.99
set
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
MA3449S
MA3450S
MA3451S
MA3452S
MA3453S
MA3454S
MA3455S
MA3456S
MA3457S
MA3458S
MA3459S
1963
1964-68
1964-66
1967-69
1969-75
1967-72
1969-71
1969-72
1972-73
1974
1975
904 (3 line set) ..............................................
Slant 6 w/904 ................................................
w/V8..............................................................
727 w/loop 12" from radiator........................
Slant 6 w/904 ................................................
318 w/904......................................................
340 ci w/727..................................................
727 w/loop near radiator ...............................
340 w/727......................................................
Dart, 318 w/904 ............................................
Swinger .........................................................
74.99
69.99
69.99
69.99
69.99
69.99
69.99
69.99
69.99
69.99
74.99
set
pr
pr
pr
pr
pr
pr
pr
pr
pr
pr
1963-74 B-Body Transmission Cooler Lines
and save you the hassle of bending up your own lines. Applications
available for 1962-74 B-Body vehicles including 1962 Dodge Dart,
Polara 500, 1963 Dodge 330, 440, Polara, Polara 500, 1962-64
Plymouth Savoy, Belvedere, Fury, Sport Fury, 1965 Belvedere,
Satellite, 1966-74 Belvedere, Charger, Coronet, GTX, Road Runner,
Satellite and Super Bee.
Original Material - B-Body
MB2609M
MB2610M
1963-65
1966-69
MB2611M
MB2612M
MB2613M
MB2614M
MB2615M
1966-70
1966-70
1966
1966-70
1970
ME5028M
ME5027M
MB2618M
1971-74
1971-74
1971-72
all vehicles, 2 lines ........................................
Hemi w/auxiliary cooling (except Charger
w/hidden headlights) 4 pcs............................
727 small block .............................................
727 big block.................................................
Hemi Charger w/hidden headlights (4 pcs)...
small block w/904 trans ................................
727 big block.................................................
727 small block .............................................
318 ci w/904..................................................
Stainless Steel - B-Body
39.99 set
74.99
39.99
39.99
74.99
39.99
set
pr
pr
set
pr
74.99
39.99
39.99
39.99
set
pr
pr
pr
MB2609S
MB2610S
1963-65
1966-69
MB2611S
MB2612S
MB2613S
MB2614S
MB2615S
1966-70
1966-70
1966
1966-70
1970
ME5028S
ME5027S
MB2618S
1971-74
1971-74
1971-72
all vehicles, 2 lines ........................................
727 small block .............................................
727 big block.................................................
Hemi Charger w/hidden headlights (4 pcs)...
small block w/904 trans ................................
727 big block.................................................
727 small block .............................................
318 ci w/904..................................................
69.99 set
114.99
69.99
69.99
114.99
69.99
set
pr
pr
set
pr
114.99
69.99
69.99
69.99
set
pr
pr
pr
1970-74 E-Body Transmission Cooler Lines
Each line is manufactured using a special process that duplicates
the correct bends that match factory original equipment. Couple
precise manufacturing techniques with choice material selection and
you can be sure that you are installing the best transmission cooler
lines on the market. These lines, produced in your choice of original
steel or never-rust stainless steel, will fit your E-Body and save you
the hassle of bending up your own lines. Applications available for
E-Body vehicles such as Barracuda, ‘Cuda and Challenger.
Original Material - E-Body
ME5026M
ME5027M
ME5028M
1970-71
1970-74
1970-74
Hemi 3 lines .................................................. 44.99 set
727 or 904, 2 lines......................................... 39.99 pr
727 big block, 2 lines .................................... 39.99 pr
Stainless Steel - E-Body
ME5026S
ME5027S
ME5028S
1970-71
1970-74
1970-74
Hemi 3 lines .................................................. 74.99 set
727 or 904, 2 lines......................................... 69.99 pr
727 big block, 2 lines .................................... 69.99 pr
491
Each line is produced using a special process that duplicates the
correct bends that match factory original equipment. Couple
precise manufacturing techniques with choice material selection
and you can be sure that you are installing the best transmission
cooler lines on the market. These lines, produced in your choice
of original steel or never-rust stainless steel, will fit your B-Body
Transmission Parts
Transmission Output Shaft Seal
Output shaft seal for Torqueflite 727 transmissions.
This seal fits all versions of the transmission for all
models. The transmission rear seal is easily replaced
after removing the driveshaft. A new seal is cheap
insurance against nasty leaks that can saturate the
underside of the car with transmission fluid.
MN2190 all............................................. 11.99 ea
B-Body Transmission Conversion Mount
Installing a 1966 or newer transmission into an early
model B-Body Mopar just got easier, thanks to this
unique B-Body transmission conversion mount for
1962-65 models! This handy mount eliminates the
need for crossmember fabrication. Manufactured with
high quality polyurethane. Made in USA.
MB2431 1962-65 conversion ............ 129.99 ea
MN2709
MN2708
1967-76 Prothane Transmission Mount Sets
Polyurethane transmission mounts limit unwanted
movement and control torque to transfer more energy
to the wheels and also reduce the chance of breakage.
Polyurethane mounts are very durable and resistant to
oil, chemicals and road contaminants that deteriorate
rubber mounts. Gain performance for the street or
track with these nearly indestructible transmission
mounts! Made in USA.
1963-76 Polyurethane Transmission Mounts
Energy Suspension offers an upgraded transmission
mount with rigid and durable polyurethane construction
for better performance and longevity. Polyurethane is
unaffected by all automotive fluids and contaminants.
Featuring strong interlocking metal construction, this
mount replaces the complete original transmission
mount and is for use with both automatic or manual
transmissions. Available in red (R) or black (G) colored
polyurethane. Please specify color code when ordering.
Made in USA.
A-Body
51112
1963-73 Dart, all .................... 49.99 ea
51112
1967-69 Barracuda, all .......... 49.99 ea
51112
1971-72 Demon, all ............... 49.99 ea
51112
1971-76 Dart Swinger, all...... 49.99 ea
51112
1970-72 Duster, all ................ 49.99 ea
51112
1973-76 Scamp, all ................ 49.99 ea
51112
1960-76 Valiant, all ............... 49.99 ea
B-Body
51112
1966-71 Charger, all .............. 49.99 ea
51112
1965-70 Coronet, all .............. 49.99 ea
51112
1969-71 Road Runner, all ...... 49.99 ea
51112
1969-71 Satellite, all .............. 49.99 ea
E-Body
51112
1970-71 all ............................. 49.99 ea
Internal/External Snap Ring Pliers
A handy combination tool for the removal or installation
of internal and external snap rings.
Y46000 ................................................ 15.99 ea
Note: *Changed mid-year.
M
MN2708 1967-72
MN2709 1973-76
MN2708 1966-70
MN2709* 1971
MN2709 1972-74
MN2709 1970-74
A-Body ...................
A-Body ...................
B-Body ...................
B-Body ...................
B-Body ...................
E-Body ...................
49.99
49.99
49.99
49.99
49.99
49.99
set
set
set
set
set
set
Mopar Performance Kickdown Cables
Mopar Performance kickdown cables for engine and
transmission swaps when production kickdown linkage
will not work or is unavailable. Choose between the
Torqueflite set that includes the bracket, spring and
hardware or the cable alone for single 4 bbl applications.
MN2236 Torqueflite ............................... 149.99 set
Polyurethane Transmission Mount Kit
MD4228
1962-76 Polyurethane Transmission Mount
Schumacher polyurethane transmission mount for
various 1962-76 Mopar muscle cars. These direct
replacement mounts are designed to look like the
originals while offering the strength and durability
of polyurethane. Made in USA.
A-Body
MD4228 1963-66 2-stud ...................... 129.99 ea
MD4229 1967-72 1-stud ...................... 129.99 ea
MD4230 1973-76 bolt-through ............ 129.99 ea
B-Body
MB2668 1962-65 w/auto ..................... 114.99 ea
MD4228 1962-65 w/4 speed ................ 129.99 ea
MB2431 1965-65 conv to 66 & newer 129.99 ea
MD4229 1966-70 1-stud ...................... 129.99 ea
E-Body
492
Transmission Mounts
Energy Suspension offers an upgrade to the
Mopar transmission mount with rigid and durable
polyurethane. For use with automatic or manual
transmissions. Includes two polyurethane bushings
and one metal sleeve to rebuild your original mount.
Available in red (R) or black (G) colored polyurethane.
Please specify color code when ordering.
Note: Must reuse the original mounting bracket.
A-Body
51101
51101
51101
51101
51101
51101
51101
B-Body
51101
51101
51101
51101
51101
E-Body
51101
1967-70
1971-76
1971-72
1971-76
1973-76
1973-76
1973-76
Dart, 318 ..................
Dart, 318, 340, 360 ..
Demon, 318, 340 .....
Dart Swinger, all......
Duster, all ................
Scamp, all ................
Valiant, all ...............
16.99
16.99
16.99
16.99
16.99
16.99
16.99
kit
kit
kit
kit
kit
kit
kit
1969-70
1969-70
1971-76
1972-74
1972-74
Charger, 318, 440 ....
Coronet, 318, 440 ....
Charger, all ..............
Road Runner, all ......
Satellite, all ..............
16.99
16.99
16.99
16.99
16.99
kit
kit
kit
kit
kit
1970-74 all ............................. 16.99 kit
MN2236
1962-76 Torqueflite Kickdown Cable Set
This complete kickdown kit for your Torqueflite
transmission works on all 1962-76 carbureted,
rear wheel drive Mopar models with Torqueflite
transmission. Fit everything from 2 barrel 6 cylinders
to Hemi and 440 Six-Packs, with just about any
intake manifold. This patented kit gives you proper
throttle pressure, correct shift points, versatile
installation combinations, and provide longevity to
your Torqueflite.
MN2236 1962-76 ................................... 149.99 set
MN2238 replacement cable .................... 109.99 ea
Transmission Parts
1530040
Hurst T-Handles
MN2375
MN2376
Hammer Head T-Handle
This stylish Hammer Head T-handle, the same
ergonomic handle on B&M Hammer shifters, fits all
B&M shifters and most aftermarket and OEM (SAE
or USS thread) shifters with 1/2"-20, 3/8"-24, 3/8"-16
& 5/16"-18-thread pattern.
223014
chrome aluminum finish ........... 41.99 ea
Add a Hurst T-Handle to your shifter for a firmer grip
during shifting. Quality die-cast aluminum T-Handle
is embossed with the familiar Hurst logo and comes
in your choice of chrome, polished or brushed finish.
Order direct fit by the size and finish. SAE universal
fit includes adapters in 1/4-28, 5/16-18, 3/8-16, 1/220. Metric/SAE universal fit includes 3/8-16, 3/8-24,
7/16-20, 1/2-20, M10x1.25, M10x1.5, M12x1.25
and M12x1.75.
Note: *Does not include SAE 3/8-24
and 7/16-20. No further discounts apply.
Chrome Finish T-Handle
1530032 SAE universal fit ................... 39.99 ea
Polished Aluminum T-Handle
1530040 Metric/SAE universal fit ....... 39.99 ea
Brushed Aluminum T-Handle
1530020* Metric/SAE universal fit ....... 34.99 ea
MN2378
223009
MN2379
223011
Grab a T-Handle for Positive Shift Results!
1630050
T-Handles fit all B&M and most other aftermarket and
OEM shifters. Includes thread inserts to fit 1/2"-20,
3/8"-24, 3/8"-16, and 5/16"-18 thread shifters.
223009
223010
223011
T-handle chrome aluminum ...... 34.99 ea
T-handle brushed aluminum ..... 29.99 ea
T-handle black plastic ............... 21.99 ea
Hi-Tech Kickdown Kits
Lokar’s “U-Cut-to-Fit” Hi-Tech Kickdown Cables are
designed with a specially extruded liner - not ordinary
brake hose, and use aluminum fittings with ferrule
to eliminate frayed cable ends and extend cable life.
Available with a plain or polished black housing, a
plain or polished stainless steel braided housing, or a
black stainless steel braided housing. Adaptable for all
types of manifolds including tunnel ram and blower
manifolds. Complete instructions included.
Stainless Steel Housing
MN2375 A 727 ....................................... 89.99 set
MN2376 A 904 ....................................... 81.99 set
Polished Stainless Steel Housing
MN2381 A 727 ....................................... 104.99 set
MN2382 A 904 ....................................... 104.99 set
Black Stainless Steel Housing
MN2377 A 727 ....................................... 89.99 set
MN2378 A 904 ....................................... 89.99 set
Black Housing
MN2379 A 727 ....................................... 81.99 set
MN2380 A 904 ....................................... 81.99 set
Polished Black Housing
MN2383 A 727 ....................................... 104.99 set
MN2384 A 904 ....................................... 104.99 set
1530003
223007
223012
B&M Round Shift Knobs
Grab a B&M round shift knob for a universal fit and
classic or modern appearance. The high-impact, stainresistant white shift knob or CNC-machined billet
aluminum knob both feature the B&M logo and fit
shift levers with 1/2"-20, 3/8"-24, 3/8"-16 or 5/16"-18
threads with adapters. Fits most B&M and other shifters
with SAE or USS threads.
Competition Knobs/T-Handles with Switch
The Hurst Competition Knob and T-Handle features
a heavy-duty, quick release 12 volt normally open
switch with 24" long wire lead. Ideal for use with Roll/
Control, trans brake, nitrous or other 12 volt accessory.
Choose round solid plastic black knob or brushed
finish aluminum T-Handle with embossed Hurst logo.
White Ball Shift Knob
223007 SAE thread ............................... 29.99 ea
Billet Shift Knob
223012 SAE thread ............................... 59.99 ea
Round Plastic Knob With Switch
1630050 black knob 7/16"-20 thread ...... 71.99 ea
Aluminum T-Handle With Switch
1530003 Hurst T-Handle 3/8"-16 thread . 59.99 ea
493
MN2381
Auto Shifter Components
1966-68 Console Shifter
Replace the worn shifter on
your 1966-68 A or B-Body
vehicle or convert your
column shift car to
floor shift with this
brand new shifter
assembly. This
exact replacement
features chrome
knob with matching
button. Fits 196668 A-Body models
equipped with
optional center
console.
MD4010 1966-68 AT w/console ......... 204.99 ea
MP71015
MP71016
1966-76 Lower Shifter Linkage Rods
MD4031
Reproduction lower shift linkage rods for 1966-76 A,
B, and E-Body models. These reproduction rods link
the shifter torque shaft to the transmission control
lever. Includes the swivel assembly.
MP71015 1967-76 A-Body................ 49.99 ea
MP71015 1966-70 B-Body ................ 49.99 ea
MP71016 1970-76 B-Body ................ 49.99 ea
MP71016 1971-74 E-Body ................ 49.99 ea
1969-76 Console Shifter Assembly
Replace the worn
shifter on your 196976 A-Body or 1969-70
B-Body vehicle or convert
your column shift car to
a floor shift vehicle with
this brand new shifter
assembly. This shifter
features a woodgrain
knob with black
button. Fits 1969-76
A-Body models or
1969-70 B-Body
models equipped
with optional center
console.
1969-76 A-Body
MD4011 1969-76 AT w/console ......... 204.99 ea
1969-70 B-Body
MD4011 1969-70 AT w/console ......... 204.99 ea
MD4012
1966-68 A & B-Body Shift Knob
M
Add a pistol grip handle to the factory Slap-Stik shifter
in your 1970-74 B-Body or E-Body vehicle. Provides
for more control over shifting while eliminating the
original shift ball on 1970 models or the troublesome
factory T-handle on 1971-74 models. Woodgrain
pistol grip handle with thumb rest provides for a
very comfortable feel. Applications are available for
1970-74 B-Body and E-Body vehicles equipped with
factory Slap-Stik shifter.
Pistol Grip Shift Handle Conversion Set
MD4031 1970
replaces ball ........... 189.99 set
MD4032 1971-74 replaces T-handle ... 189.99 set
1966-70 B-Body Reverse Light Switch
Replace the worn or missing shift knob on your 196668 A or B-Body with these brand new shift knob parts.
The knob assembly features chrome knob with chrome
button. The replacement knob button is manufactured
in plastic and chromed as original.
MD4012 1966-68 knob assembly ......... 84.99 ea
MP80105 1966-68 button....................... 24.99 ea
1966-70 Console Shift Lever Set
Replace the worn
shift levers on
your 1966-69
A-Body or 196670 B-Body. 196669 A-Body fits
fastback, hardtop
and convertible
models equipped
with optional
center console
including
MA2005
Barracuda
and Dart.
1966-70
B-Body
fits hardtop and convertible models equipped with
optional center console.
AT w/Console
MA2005 1966-69 A-body................... 158.99 set
MB564 1966-70 B-body ................... 159.99 set
MD4032
1970-74 B-Body & E-Body
Slap-Stik to Pistol Grip Conversion Set
Age certainly
can take its toll
on the plastics,
metal springs and
contacts within
vintage electronic
switches. Our
brand new reverse
light switch for automatic transmission equipped
1966-70 B-Body vehicles can reverse the effects of
aging and get your lighting working properly once
again. Manufactured to exact specifications, each
switch fits 1966-70 B-Body hardtop and convertible
models equipped with optional center console.
MB568 1966-70 automatic ............... 119.99 ea
MD4013
1969-76 Automatic Shift Knob
MD2540
Replace the missing or worn shift knob assembly on
your 1969-76 model or repair it with brand new parts
from Classic Industries®. The complete assembly
features a woodgrain knob with an 8-coil spring and
a black button. Components are also sold separately.
Complete Assembly
MD4013 1969-76 knob, button & spring 49.99 set
Individual Components
MD4014 1969-76 button, black ............ 8.99 ea
MD4015 1969-76 spring, 8 coil ............ 4.99 ea
A-727 Gearshift Control Torque Bracket
Lower gearshift control torque bracket. This bracket
fits various Mopar applications with floor-shifted 727
automatic transmissions and mounts to the transmission
housing. Comes complete with correct coni keps nuts
and correct style bushing.
A-Body
MD2540 1966-74 all ............................ 34.99 ea
B-Body
MD2540 1966-70 all ............................ 34.99 ea
MD2541 1971-74 with T-handle .......... 34.99 ea
E-Body
MD2540 1970
all ............................ 34.99 ea
MD2541 1971-74 with T-handle .......... 34.99 ea
1964-68 Neutral Safety Switch
Replacement single post neutral safety
switch for 1964 through 05/05/68
Mopar vehicles with automatic
transmissions. This mounts to the
transmission so that when the manual
valve operating lever fingers press
against the contact in park or neutral the
vehicle will start.
MP700208 1964-68 automatic ............. 64.99 ea
494
1971-74 B-Body, E-Body Slap-Stik T-Handle
Replace the factory Slap-Stik T-handle in your 1971-74
B-Body or E-Body vehicle with our T-handle to match
your original shifter’s appearance. Includes the hard-tofind mounting screw and installation instructions. Fits
vehicles equipped with factory Slap-Stik shifter, center
console and automatic transmission. Made in USA.
MD4054 1971-74 .................................... 49.99 ea
Automatic Transmission Shifters
1967-74 Torque Shaft Bushing
Torque shaft bushing for column and floor shift
automatic applications. Made from the correct natural
nylon for an OE appearance.
MD2542 1967-74 2 required .................. 4.99 ea
Shifters
The Most Comfortable Shifter We Offer!
Classic Style and Stout Performance!
The B&M HammerTM shifter may be the most
comfortable automatic shifter you can buy. The
handle feels like it was molded for your hand, and
the spoon-shaped, multi-position trigger allows easy
finger operation in a multitude of grip positions. For
use with 1966 & later Torqueflite A727 & A904 3
speed automatic transmissions.
The B&M QuickSilverTM shifter is a top of the line
ratchet action shifter that provides performance shifting
without a trigger. To get into park or reverse from
drive, just lift the knob/stick assembly and move it
forward into position! And it's cable operated for easy
installation and precise shifting. For use with 1966
& later Torqueflite A727 & A904 3 speed automatic
transmissions.
Important: Not for use with original consoles.
Key Features:
• Unique multi-positioned trigger for user
comfort in various shifter positions.
• Base can be trimmed to custom fit any floor.
• Reverse lockout feature meets NHRA and
IHRA requirements.
• Neutral safety switch, back-up light switch,
lighted gear indicator, polished
aluminum T-handle & cable.
• Can be used with a reverse
pattern valve body.
223016 Hammer™ shifter ..................... 221.99 ea
Key Features:
• Universal floor mount application. Base can be
trimmed to custom fit any floor.
• Cable operated for quick installation and
accurate shifting. You can’t miss a gear.
• Neutral safety switch, back-up light switch,
lighted gear indicator, chrome
knob & cable.
pattern valve body.
223018 QuickSilver™ shifter ................ 291.99 ea
High Performance Ratchet Action!
The Megashifter TM is one of B&M's all-time
classic designs due to timeless good looks and high
performance ratchet action. It's ideally suited for most
popular applications that use a 1966 & later Torqueflite
A727 & A904 3 speed automatic transmissions.
Key Features:
• Universal floor mount application. Base can
be trimmed to custom fit any floor.
accurate shifting.
• Neutral safety switch, backup light switch,
lighted gear indicator, polished
aluminum T-handle, & cable.
pattern valve body.
223017 Megashifter™ shifter ................ 324.99 ea
Key Features:
• Neutral safety switch, back-up
light switch,
lighted gear indicator, black
T-handle & cable.
223019 Sport Shifter™ shifter............... 214.99 ea
Key Features:
accurate shifting.
• Reverse lockout feature meets NHRA and IHRA
requirements.
• Neutral safety switch & polished
aluminum
T-handle & cable.
223020
StarShifter™ shifter .................. 199.99 ea
More Bang for the Buck!
The B&M Z-GateTM shifter combines classic styling,
performance, and a popular price. If you're building
a project on a budget, or simply want to upgrade your
automatic shifter, the Z-Gate™ is the only choice! Great
for most 3-speed automatics, the patented 'Z'shaped
architecture eliminates the possibility of overshifting
and missing a gear. Even more, this easy to operate
shifter has many of the features found in our top of the
line units, and it includes a T-handle and T-trigger - so
you get the most bang for your buck! For use with
1966 & later Torqueflite A727 & A904 automatic
transmissions.
Key Features:
• Reverse lockout feature meets NHRA and IHRA
requirements.
• Neutral safety switch, back-up
light switch, black T-handle &
cable.
223021
Z-Gate™ shifter ........................ 189.99 ea
B&M Transmission Shifters
495
The Perfect Shifter for Your Daily Driver!
The Sport ShifterTM is the low cost alternative to B&M's
top of the line MegaShifter™ that performs as if it was
twice the price! The Sport Shifter™ is not a ratchet
shifter and not intended for racing applications, but it
makes a perfect addition to any street machine - making
daily driving something to look forward to. Utilizing
a simple detent action between First, Second, High
and Neutral, it features a lighted gear indicator, black
plastic T-handle, neutral safety switch, back-up light
switch and flat aluminum stick. For use with 1966
& later Torqueflite A727 & A904 3 speed automatic
transmissions.
Straight Line Detent Shifter with Timeless Style!
The B&M StarShifter is a versatile three speed
automatic shifter in a clean, timelessly styled package!
In normal mode, the StarShifter is a straight line detent
shifter. With the lever is in Low, lift the trigger and
pull the stick back to convert to ratchet action. Move
the stick forward for the 1-2 and 2-3 shifts. Cannot
be used with reverse pattern valve body. For use with
1966 & later Torqueflite A727 & A904 automatic
transmissions.
Shifter & Components
MN2580
MN2584
1960-76 Single & Dual Action Automatic Shifters
FMS6727EM
These shifters are manufactured from steel and offer unique front, mid, and rear mounting options, multi axis
adjustments, and true craftsmanship. Available with single-action push-button operation, or combination pushbutton and side-shift dual-action. Shift however you want!
Important: You can use any shift knob with the dual action shifter but will lose the push button operation.
Note: Single action shifters will work with factory consoles but are not direct factory replacements, single action shifter
moves in a straight line that will allow you to position the console in the stock or near-stock location.
XFMSS6727EB
M
Floor Mount Shifters
Upgrade the shifter in your classic with one of these
premium Lokar floor mounted shifters. Designed to
operate on solid adjustable linkage, these shifters
include the neutral safety switch with positive safety
lockout in park and neutral. They also feature gold
iridited bracketry and a teflon lined button for smooth
operation. These shifters for bucket seats include an 8",
10" and 12" chrome or black handle, and the bench seat
shifter includes a 16" curved chrome or black handle.
Includes a mushroom style knob with a brushed finish
or black anodized finish. All mounting hardware and
instructions are included.
Chrome Handle w/Brushed Finish Knob
Bucket Seats
FMS6727CM
727
12" .......... 269.99 ea
FMS6727DM
727
10" .......... 269.99 ea
FMS6727EM
727
8" ............ 269.99 ea
FMS6904CM
904
12" .......... 269.99 ea
FMS6904DM
904
10" .......... 269.99 ea
FMS6904EM
904
8" ............ 269.99 ea
Bench Seats
FMS6727GM
727
16" .......... 304.99 ea
FMS6904GM
904
16" .......... 304.99 ea
Black Handle w/Black Anodized Knob
Bucket Seats
XFMS6727CB
727
12" .......... 269.99 ea
XFMS6727DB
727
10" .......... 269.99 ea
XFMS6727EB
727
8" ............ 269.99 ea
XFMS6904CB
904
12" .......... 269.99 ea
XFMS6904DB
904
10" .......... 269.99 ea
XFMS6904EB
904
8" ............ 269.99 ea
Bench Seats
XFMS6727GB
727
16" .......... 304.99 ea
XFMS6904GB
904
16" .......... 304.99 ea
496
Single Action Shifters
1960-76 Torqueflite 727 Transmission
MN2512
8" arm with black knob...................................................................................................
MN2513
8" arm with deluxe knob.................................................................................................
MN2514
10" arm with black knob.................................................................................................
MN2515
10" arm with deluxe knob...............................................................................................
MN2516
MN2543
MN2544
MN2545
MN2546
MN2547
MN2548
MN2549
Dual Action Shifters
MN2578
MN2579
MN2580
MN2581
MN2582
MN2583
MN2584
MN2585
MN2586
MN2587
MN2588
MN2589
MN2573
MN2574
MN2575
MN2576
229.99 ea
239.99 ea
229.99 ea
239.99 ea
235.99 ea
245.99 ea
229.99 ea
239.99 ea
229.99 ea
239.99 ea
235.99 ea
245.99 ea
279.99 ea
289.99 ea
279.99 ea
289.99 ea
285.99 ea
295.99 ea
279.99 ea
289.99 ea
279.99 ea
289.99 ea
285.99 ea
295.99 ea
MN2577
Shifter Accessories
Add a touch of elegance to your vehicle with these shifter accessories. The nostalgic chrome cap installs easily
on vertical shift boots to accent the shift lever, while the boot kits dress up your shifter with a synthetic leather
boot in your choice of black, gray, or tan. Finish off your shifter with a precision stamped stainless steel trim
ring, mount screw openings for a smooth look.
Nostalgic Chrome Cap
MN2573
chrome cap........................................................................................................................ 7.99 ea
Shifter Boots
MN2574
black boot ......................................................................................................................... 19.99 ea
MN2575
gray boot ........................................................................................................................... 19.99 ea
MN2576
tan boot ............................................................................................................................. 19.99 ea
Round Boot Trim Ring with Hardware
MN2577
trim ring ............................................................................................................................ 19.99 ea
Automatic Transmission Shifters
Hurst Shifters
3160009
The Floor Mount Hurst Quarterstick Provides a Positive Shift Feel!
Pistol-Grip Quarter Stick Provides a Firm Natural Grip!
The Hurst Pistol-Grip Quarter Stick automatic shifter is designed for a firm
comfortable natural grip, providing a positive feel when shifting. The Pistol-Grip
handle is CNC-machined from billet aluminum and features a precision snap action
thumb switch that is ideal for operating a Hurst Roll/Control, nitrous system or
trans brake. Optional shifter cover can be trimmed to fit any floorpan. For a stock
console look, choose the distinctive black textured plastic cover kit. Or, for a racier
look, order the aluminum cover kit that attaches to the shifter with 2 quick release
pins. Both are sold separately. The Hurst Pistol-Grip Quarter Stick fits Mopar A727,
A904 transmissions.
Important: For use on vehicles without factory consoles.
Key Features:
• Forged aluminum stick.
• CNC Machined Billet Pistol-Grip handle.
• Snap action thumb switch for operating roll/control,
nitrous or trans brake.
• One-hand operated, spring loaded reverse lock-out mechanism.
• Factory installed neutral safety switch.
• Cable operated.
• Optional cover kits sold separately.
The Hurst Quarter Stick automatic shifter is designed to provide positive gear
change control for street or strip applications. Detent activation is controlled by a
chrome plated trigger contoured to fit comfortably into the driver’s hand. Optional
shifter cover can be trimmed to fit any floorpan. For a stock console look, choose
the distinctive black textured plastic cover kit. Or, for a racier look, pick the
aluminum cover kit that attaches to the shifter with 2 quick release pins. Both are
sold separately. The Hurst Quarter Stick shifter fits A727 and A904 transmissions.
Key Features:
• Forged aluminum stick.
• One-hand operated, spring loaded reverse lock-out mechanism.
• Factory installed neutral safety switch.
• Cable operated.
• Optional cover kits sold separately.
Forward Valve Body
3160009
A727, A904........................................................................ 279.99 ea
Reverse Valve Body
3160014
A727, A904........................................................................ 279.99 ea
Reverse Valve Body
3162014
A727, A904....................................................................... 364.99 ea
1300041
Quarter Stick Covers Come in Two Distinctive Styles!
One of the nice features of the Hurst Quarter Stick Shifter is the ability for you
to choose the finished look you want through the availability of two distinctive
cover kit designs.
1531000
1536210
Universal Pistol-Grip Shifter Handle
Need a serious grip for power shifts? Wrap your hand around the Hurst pistol grip
shifter handle! It’s designed to provide a firm, natural grip to help prevent missed
shifts. Manufactured from aluminum featuring the Hurst name embossed on both
sides. Available with a 12 volt 10 amp normally open switch to operate roll control,
nitrous, or other accessories. Choose from natural and black anodized finishes. The
handle has a 16mm-1.50 internal thread and includes jam nuts as well as the following
SAE and Metric adapters: 3/8"-16, 1/2"-20, 10mm-1.25, 10mm-1.50, 12mm-1.25,
& 12mm-1.75.
1531000
1536200
1536210
natural finish ...................................................................... 54.99 ea
natural finish with switch................................................... 69.99 ea
black finish with switch ..................................................... 69.99 ea
Style One-Plastic Cover Set:
• Adds a “factory option” look to your Hurst shifter.
• Textured black plastic can be trimmed to fit any floor contour.
• Mounting plate & button head screws are included.
1300055
plastic cover set ................................................................. 84.99 set
Style Two-Aluminum Cover Set:
• Adds a “race car” look to your Hurst shifter.
• Attaches to shifter with two quick release pins.
1300041
aluminum cover set............................................................ 74.99 set
Retro Hurst Emblem
Based on original Hurst
blueprints, this Hurst
Equipped emblem is an authentic reproduction of the one used on the late 60’s
muscle cars. Equipped with a factory Hurst shifter. Made of durable ABS plastic
with 3M adhesive tape backing for permanent mounting. Measures 1-1/4" x 5-1/4".
1361000
Hurst Equipped emblem .................................................... 19.99 ea
Hurst Transmission Shifters
497
1300055
Manual Transmission
Billiard Ball Shift Knobs
These billiard shift knobs are made from authentic,
2-1/4" diameter billiard balls with precision threaded
adapter inserts to ensure a snug fit in your vehicle.
This unique knob will provide a smooth, solid shift
feeling. Choose the classic 8-ball or the ball of your
favorite color! Shift balls include a built in 16mm x 1.5
threaded insert with jamb nut and detailed instructions
for easy installation. Adaptors for other thread sizes
are available separately.
MN2550 1 ball ...................................... 19.99 ea
MN2551 2 ball ...................................... 19.99 ea
MN2552 3 ball ...................................... 19.99 ea
MN2553 4 ball ...................................... 19.99 ea
MN2554 5 ball ...................................... 19.99 ea
MN2555 6 ball ...................................... 19.99 ea
MN2556 7 ball ...................................... 19.99 ea
MN2557 8 ball ...................................... 14.99 ea
MN2558 9 ball ...................................... 19.99 ea
MN2559 10 ball .................................... 19.99 ea
MN2560 11 ball .................................... 19.99 ea
MN2561 12 ball .................................... 19.99 ea
MN2562 13 ball .................................... 19.99 ea
MN2563 14 ball .................................... 19.99 ea
MN2564 15 ball .................................... 19.99 ea
MN2565 white 8 ball with red center ... 29.99 ea
M
MN2566
MN2568
Royal Purple Synchromax
Transmission Rebuild Set for A-833
Classic Industries® has put together a comprehensive
transmission rebuild set for all Chrysler A-833
transmissions. Set includes large and small bearing
sizes to accommodate all applications. Comes with all
the gaskets, seals, synchro rings and all small items
needed to rebuild your transmission.
MN2374 ............................................... 259.99 set
This manual transmission fluid increases performance
and the life of your equipment. It improves shifting,
reduces gear noise and increases power transfer to
the wheels. It also lowers operating temperatures
and provides outstanding wear protection for longer
transmission life. Synchromax is recommended
for manual transmissions that specify an automatic
transmission fluid. It’s also ideal for 4×4 transfer
cases and motorcycle gear boxes. Synchromax is fully
compatible with all types of friction materials. It provides
excellent corrosion and oxidation protection without
affecting the soft metals commonly found in manual
transmission synchronizers. Synchromax is formulated
with Royal Purple’s proprietary Synerlec technology for
unsurpassed performance and protection.
RP01512 quart ..................................... 18.99 ea
RP12512 case of 12 qts........................ 205.99 cs
MN2567
MN2569
Manual Transmission Fluid
This 80W lightweight fully synthetic manual
transmission oil reduces parasitic drag and provides
race proven protection.
JG1206 quart ....................................... 19.99 ea
JG1207 case of 12 qts .......................... 239.99 cs
CB40043
MN2570
MN2571
Cue Ball Shift Knobs
These cue ball shift knobs are 2-1/4" in diameter and
come with a built-in precision threaded insert that
includes adapters to ensure a snug fit. Made from
authentic unused billiard cue balls. Choose from the
most popular shift patterns. Shift balls include a built in
16mm x 1.5 threaded insert with jamb nut and detailed
instructions for easy installation. Adaptors for other
thread sizes are available separately.
MN2566 4-speed.................................. 29.99 ea
MN2567 4-speed.................................. 29.99 ea
MN2568 5-speed.................................. 29.99 ea
MN2569 5-speed.................................. 29.99 ea
MN2570 6-speed.................................. 29.99 ea
MN2571 6-speed.................................. 29.99 ea
498
Manual Transmission
natural
black
grey
Ringbrothers Billet Clutch Reservoir
This Ringbrothers billet clutch reservoir will add some
high tech look under the hood. Machined from 6061-T6
billet aluminum. Replaces the stock GM plastic clutch
reservoir for hydraulic clutches. Accepts 1/8" NPT to
AN fitting. Includes mounting bracket and 5/16" nickel
plated hose barb fitting. Available in natural, black and
grey finish. Can be used for many custom applications.
CB40043 natural ................................... 134.99 ea
CB40044 black ..................................... 144.99 ea
CB40045 grey ....................................... 144.99 ea
Clutch Pilot Bushing
Clutch pilot bushings fit on the input shaft of manual
transmissions and can cause hard shifting and increase
transmission wear when worn out. When changing
your clutch, use one of these new bronze pilot bushing
for best results.
MN2187 all ........................................... 8.99 ea
McLeod Flywheels
McLeod Steel Flywheels
For easy stoplight acceleration, these flywheels are
ideal. The mass of these steel flywheels make them
perfect for launching a heavy car with a smaller engine
with less torque and horsepower. If you have multiple
engines that require different balance on the flywheel,
you can add or remove weights as required, without
buying another flywheel.
Note: *Flywheels use Bendix type starters.
MN2388
Clutch Pattern Notes:
4. 10", 10.5", 10.95" B&B Diaphragm
5. 11", 12" B&B Diaphragm with shouldered bolts
6. 10", 10.5" LONG & 10" Diaphragm
8. 11" LONG with 3/8" bolt holes
Part #
MN2388
MN2389
MN2390
MN2388
MN2391
MN2392
MN2391
MN2393
Years
1964-76
1972-73
1968-76
1964-76
1970-71
1970-72
1973-76
1963-72
MN2394
MN2395
MN2396
MN2397
1960-76
1966-69
1970-72
1973-76
MN2398*
MN2399*
1960-61
1966-69
MD2538
13.195” Ring Bear O.D (See Notes 4 and 5)
Engine
Description
318,340
6 bolt crank
340 w/counterbalance
sml. fly. w/6 bolt crank w/cast
360
sml. fly. w/6 bolt crank
383,400 & 440
6 bolt crank
383,400 w/counterbalance 6 bolt crank w/cast
w/4bbl & 6bbl 6 bolt crank
sml. fly. w/6 bolt crank w/cast
426 Wedge & Hemi
sml. fly. w/8 bolt crank
14.568” Ring Bear O.D (See Notes 4, 5 and 8)
383,400
lrg. fly. 0 balance, 6 bolt crank
426 Wedge & Hemi
lrg. fly. 8 bolt crank
w/4bbl & 6bbl 6 bolt crank
6 bolt crank w/cast
14.640” Ring Bear O.D (See Notes 4, 5 and 8)
331,354 & 392 Hemi
8 bolt crank, sml. crank bolts
426 Street Hemi
lrg. fly. 8 bolt crank
Teeth
130 ............ 349.99
130 ............ 359.99
130 ............ 359.99
130 ............ 349.99
130 ............ 359.99
130 ............ 359.99
130 ............ 359.99
130 ............ 349.99
ea
ea
ea
ea
ea
ea
ea
ea
143 ............ 379.99
143 ............ 379.99
143 ............ 399.99
143 ............ 389.99
ea
ea
ea
ea
Engine
Year
273
1964-69
318
1967-76
340
1968-72
361
1964-67
383
1964-71
Crank
All
All
Steel
All
Steel
Engine
383HP
400HP
413
426W
440
Year
1970-71
1972
1964-65
1964-66
1966-72
Crank
Steel
Steel
Steel
Steel
Steel
1964-76 OEM Flywheel
These replacement flywheels are designed for various
Chrysler 1964-76 models that use a 10.5" or 10.95"
clutch.
MD2538 1964-76 except 360 .............. 439.99 ea
MN2387 1971-76 360 only .................. 349.99 ea
172 ............ 469.99 ea
172 ............ 469.99 ea
HD1503
HD1593
RAM Billet Steel Flywheels
counterbalance weights for
various applications
counterbalance weight bolterd to flywheel
McLeod Steel Flywheel Weights
McLeod flywheels are designed to have counterweight simply bolted on to accommodate various engine applications.
If you have multiple engines that require different flywheel balance, you can add or remove counterweights and
use this even on a internally balanced motor, saving you the cost of buying a new flywheel.
Part #
460007
MN2401
MN2402
MN2403
MN2402
Year
1972-73
1971-76
1970-71
1970-72
1973-76
Engine
340
360
383,400
440
440
Application
C/B Location
w/cast crank only
A
all models
A
w/cast crank only
C
4bbl & 6bbl only
C
w/cast crank only
C
Weight in Grams
12
109
64.5
30.1
64.5
Inch (Ounce)
4.22...........
19.79..........
12.9...........
6.5............
12.9...........
RAM billet steel flywheels are recommended as
a replacement for factory cast flywheels in high
performance and racing vehicles. Cast flywheels are
not explosion proof and can be dangerous when used
in high performance applications at higher RPMs.
RAM billet steel flywheels are CNC machined from
certified materials and exceed SFI specifications.
After machining, the flywheels are blanchard ground
parallel to the crankshaft mounting surface ensuring
minimum runout and the optimum mating surface for
the variety of friction materials they offer. Use steel
flywheels in heavier drag race models or for the best
drivability in street driven vehicles.
41.99 ea
41.99 ea
41.99 ea
41.99 ea
41.99 ea
130-Tooth '0' Balance Flywheels
H1503 6 bolt crank.............................. 299.99
H1583 8 bolt crank.............................. 299.99
143-Tooth '0' Balance Flywheels
H1595 6 bolt crank.............................. 319.99
H1593 8 bolt crank.............................. 329.99
Manual Transmission . Flywheels
ea
ea
ea
ea
499
counterbalance weight hole locations
Flywheel & Clutch
MD2532
MD2533
MD2534
1962-76 Clutch Fork & Components
88766
1962-76 8 Cylinder Clutch Sets
Ram clutch sets contain correct, high quality replacement parts to ensure proper
fit and operation in your vehicle. These clutch sets are for models that are stock or
have minor modifications. Each set contains clutch disc, pressure plate, throw out
bearing and alignment tool. Each disc carries a 1 year/12,000 mile manufacturer’s
warranty from date of purchase.
88766
88503
88773
88504
88768
All w/23 spline 10.5" clutch ............................................. 194.99
All w/18 spline 10.95" clutch ........................................... 294.99
All w/23 spline 10.95" clutch ........................................... 251.99
All w/18 spline 11" clutch ................................................ 299.99
All w/23 spline 11" clutch ................................................ 194.99
set
set
set
set
set
Replacement clutch fork, boot, and components for various 1962-76 A, B, and
E-Body models.
Clutch Fork & Boot Set
B & E-Body - OEM
MD2532 1962-76 w/LA-series V8....................................................... 67.99 set
Clutch Fork Boot
A, B, & E-Body - Reproduction
MD2529 1964-74 w/4-spd or 3-spd column shift ............................. 24.99 ea
Replacement Hardware
B & E-Body - OEM
MD2533 1962-76 clutch fork rod adjustment nut ............................. 2.99 ea
MD2534 1962-76 clutch fork rod washer. ........................................... 9.99 ea
MD2329
MD2530
1966-76 Clutch Rod Service Kit
88766H
M
1962-76 V8 HDX Clutch Sets
Kit provides all components necessary to service the clutch adjusting rod. Includes
adjusting rod, special lock nut, clutch fork return spring, nylon wear washer, spring
retainer, conical washer, and clutch fork insulator.
A-Body
MA2329
1967-76 small block....................................................... 44.99 kit
B & E-Body
MD2530
1966-70 small block....................................................... 44.99 kit
MD2531
1971-74 big block .......................................................... 44.99 kit
HDX Clutch sets are the performance upgrade for your daily driver/hot rod. Pressure
plates feature increased clamp loads and our 200 Series organic clutch disc use
a premium organic facing material that greatly increases rotational strength. Use
HDX sets for models with bolt on mods and mild power enhancements, for street
or strip. Each set contains clutch disc, pressure plate, throw-out
bearing and alignment tool.
MB2297
88766H
88503H
88773H
88504H
88768H
all w/23 spline 10.5" clutch .............................................
all w/18 spline 10.95" clutch ...........................................
all w/23 spline 10.95" clutch ...........................................
all w/18 spline 11" clutch ................................................
all w/23 spline 11" clutch ................................................
323.99
319.99
314.99
319.99
299.99
set
set
set
set
set
MB2298
MD2578
1966-74 Flywheel Cover
Reproduction flywheel inspection covers for 1966-74 models. Available in or
ABS plastic, these are manufactured to original specifications and will replace the
original cover exactly.
Cast Iron Bellhousing
Big Block with 11" Cover
MD2577
1966-69 ABS plastic ...................................................... 41.99 ea
Aluminum Bellhousing
Big Block with 10-1/2" Cover
MD2578
1970-74 ABS plastic ...................................................... 41.99 ea
500
Manual Transmission . Clutch Parts
MB2430
1962-76 Bell Crank/Z-Bar
Replacement bell crank, also known as a “Z-bar,” for 1962-76 Mopar models. Each
bell crank is designed to replace the original exactly.
A-Body
MA2295
1962-63 small block....................................................... 91.99 ea
MA2495
1964-66 small block....................................................... 73.99 ea
MA2296
1967-76 big block .......................................................... 73.99 ea
MA2297
1967-76 small block....................................................... 73.99 ea
MA2298
1967-76 L6 ..................................................................... 73.99 ea
B-Body
MB2429
1962-65 all V8 ............................................................... 73.99 ea
MB2430
1966-72 big block .......................................................... 73.99 ea
E-Body
MB2430
1970-71 big block .......................................................... 73.99 ea
Manual Transmission Parts
MD2517
MD2519
MD2518
MD2523
MD7078
MA2330
1962-76 Replacement Clutch Linkage Parts
Replacement clutch linkage parts for various Mopar
A, B, and E-Body models. Made in USA.
Bell Crank Ball Stud Nylon Bearing
MD2517 1962-76 2 pairs required ......... 4.99 pr
Bell Crank Ball Stud Rubber Seal
MD2518 1962-76 2 required ................. 5.99 ea
Bell Crank Bearing Retaining Wire
MD2519 1962-76 .................................. 7.99 ea
Bell Crank Nylon Wear Washer
MD2523 1962-76 .................................. 1.99 ea
Bell Crank Linkage Spring Clip
MD7078 1962-76 3 required ................. 2.99 ea
1970-74 Manual Pedal Kit
Replacement pedal assembly kit for 1971-74 B-Body
and 1970-74 E-Body models. Includes the brake and
clutch pedals, bracket, spring and shaft.
ME1004 1970-74 pedal kit .................. 204.99 kit
MD7074
1966-74 Clutch Linkage Service Kit
1963-74 Clutch Pedal Stop Bumper
A complete kit to replace the clutch shaft linkage from
the clutch pedal to the clutch fork. Each kit contains
nylon bearings, snap rings, seals, washers, lock springs,
pivot ball studs and instructions. Made in USA.
MA2330 1968-71 A-Body .................... 59.99 kit
MD7074 1966-74 B & E-Body............. 59.99 kit
Clutch pedal stop bumper for various 1963-74 Dodge
and Plymouth applications.
MD2526 1963-74 pedal stop bumper ..... 5.99 ea
1966-74 B & E-Body Torque Shaft Bracket
Clutch pedal bracket stud retainer. This retainer installs
in the engine side of the firewall and secures the
clutch pedal bracket on the interior side. A must when
converting from an automatic to a 4 speed.
MD2512 1970-74 E-Body .................... 47.99 ea
MD2512 1971-74 B-Body .................... 47.99 ea
B & E-Body Bell Crank Frame Bracket Kit
The complete frame bracket and ball stud kit for B and
E-Body models. Includes the frame bracket, both ball
studs, flat washer and nut. A must when converting
from automatic to 4 or 5 speed. Made in USA.
MD2522 1966-74 bracket kit ................ 44.99 kit
MA2289
1970-74 Clutch Pedal Bracket Retainer
Excellent replacement of the original torque shaft
bracket installed on 1966-74 B and E-Body vehicles.
This is the steel bracket welded to the frame on all B and
E-Body models. The frame side ball stud mounts into
this bracket. This bracket is required when converting
to a manual transmission. Made in USA.
MD2535 1966-74 B & E-Body............ 24.99 ea
MD7076
MD2527
MB2427
MD7077
1963-76 Bell Crank Ball Studs
1967-74 A, B, E-Body Firewall Clutch Boot
Clutch bell crank ball studs for all manual transmission
A, B & E-Body models. Each stud is zinc plated for
an original appearance.
Frame-Side Ball Stud
MD7076 1965-76 A/B/E frame ............ 14.99 kit
Engine-Side Ball Stud
A-Body
MA2292 1967-68 big block .................. 74.99 ea
MA2289 1968-71 small block .............. 19.99 ea
MB2427 1969
big block .................. 74.99 ea
B-Body
MA2290 1963-64 big block .................. 49.99 ea
MA2291 1965
B-Body .................... 24.99 ea
MD7077 1966-76 B-Body .................... 14.99 ea
E-Body
MD7077 1970-74 B, E-Body ................ 14.99 ea
Engine Side Spacer
MB2426 1967-69 big block .................. 36.99 ea
This seals the hole in the firewall where the manual
transmission pedal rod goes through to the clutch
counter shaft.
MD2514 1967-74 A, B-Body ............... 3.99 ea
MD2514 1970-74 E-Body .................... 3.99 ea
Clutch adjusting rod. This rod connects the clutch fork
to the linkage and is threaded to allow adjustment. High
strength heat treated alloy steel. Zinc plated as original.
A-Body
MA2328 1967-76 A-Body, 7.5" L ........ 26.99 ea
B & E-Body
MD2527 1966-70 small block, 15º bend .. 26.99 ea
MD2528 1971-74 big block, 4.88" L .... 26.99 ea
MB2456
1968-74 Clutch Pedal Push Rod
This is a replacement of the clutch pedal push rod for
Models equipped with a 4 speed transmission.
MA2327 1968-72 A-Body ................... 19.99 ea
MB2456 1968-70 B-Body ................... 19.99 ea
MD2524 1971-74 B-Body ................... 19.99 ea
MD2524 1970-74 E-Body ................... 19.99 ea
1970-74 Clutch Pedal Return Spring
Heavy duty reproduction clutch pedal return spring for
1970-74 E-Body and 1971-74 B-Body models with
4-speed manual transmissions.
MP800101 1970-74 E-Body models.... 31.99 ea
MP800101 1971-74 B-Body models ... 31.99 ea
Manual Transmission . Clutch Parts
501
1966-76 Clutch Adjusting Rod
Manual Transmission Shifters
3320001
Hurst Linkage Rod Bushings & Clips
This is a set of either steel or nylon bushings and clips
for the ends of the Hurst linkage to take the “slop”
out of the shift rods. For 3, 4 and 5-speed manuals.
3320001
3327302
nylon bushings ....................... 11.99 set
steel bushings ......................... 12.99 set
MD4016
MD4027
MD4028
1970-74 B-Body & E-Body
Custom Grips for Hurst Shifters
Give the Hurst pistol grip shifter in your 4 speed
equipped 1970-74 B-Body or E-Body vehicle a custom
look. Replacement grips are offered in a variety of
custom finishes including Burlwood, Black or Carbon
Fiber. Fits 1970-74 B-Body and E-Body vehicles
equipped with Hurst pistol grip shifter. Includes screws
for installation.
Replacement Grip Set
MD4016 1970-74 burlwood grain plastic .. 49.99 set
MD4027 1970-74 black plastic ........... 49.99 set
MD4028 1970-74 carbon fiber............ 69.99 set
3916789
1965-72 B-Body Hurst Shifter
This Hurst Competition/Plus performance shifter
features heat-treated linkage rods and arms for strength
and durability and adjustable gear-stops to prevent
overshifting. Includes the shift mechanism, chrome
plated stick and custom white knob. Installation kit is sold
separately. Fits 1965-72 Mopar B-Body applications.
3916789 1965-72 B-Body w/o console... 359.99 ea
MD4030
1970-74 B & E-Body
Pistol Grip Shifter Sets & Components
1965-72 B-Body Hurst Shifter Install Set
Needed to install the Hurst Competition/Plus Shifter
this set includes linkage rods, shift arms, shifter
mounting plate and hardware.
M
3734089 1965-72 B-Body w/o console 199.99 set
Replace the Hurst pistol grip shifter in your 4-speed
equipped 1970-74 B-Body or E-Body vehicle with
our brand new grips, bezels and inserts. We have a
variety of components to make your worn shifter look
like new. The grips are very close to original in color,
shape and grain pattern. The upper and lower bezels
are manufactured of chrome plated die-cast zinc. The
plastic shift pattern inserts are available for original
4-speed pattern. A variety of applications are available
for 1970-74 B-Body and E-Body vehicles equipped
with Hurst pistol grip shifter.
Complete Set
Includes 4-speed insert, upper bezel, lower bezel,
grips and screws
MD4030 1970-74 8 piece set ............... 114.99 set
Individual Components
Upper Bezel
MD4017 1970-74 chrome die cast zinc . 29.99 ea
Shift Pattern Insert
MD4018 1970-74 4-speed ...................... 14.99 ea
Shifter Grip Set
MD4019 1970-74 woodgrain plastic ..... 39.99 set
Lower Bezel
MD4020 1970-74 chrome die cast zinc . 29.99 ea
1630040
Hurst Classic White Shift Knob
These solid white shift knobs are perfect for classic
vehicles that have been upgraded with a modern five or
six speed transmission. Each 1-3/4" shift knob features
an engraved and inlaid black gate shift pattern. 3/8-16
thread size. Includes jamb nut.
1630008
1630040
5-speed shift knob .................. 41.99 ea
6-speed shift knob .................. 39.99 ea
1530041
HURST Indy SSA 3 Speed Shifter
This universal shifter fits a wide variety of applications
and is ideal for converting column shift 3 speeds to floor
shift without console. Features a spring-loaded gate
for ease of operation and short, precise throws for less
stick travel. Chrome plated stick with black knob. All
components are plated for protection. Includes shifter
boot, hardware and instructions. Some modification
may be necessary during installation.
Reproduction Hurst Shift Handle
Chrome Shift Knob
This highly polished, triple chrome plated heavyweight
shift knob will add a unique appearance to your interior.
Note: May be installed on aftermarket shifters which have
the correct thread size.
5010002 ................................................. 249.99 ea
9793565 3/8" Hurst type shifters ............ 19.99 ea
502
Manual Transmission . Shifters
Get a firm grip on your shifts with this licensed
reproduction Hurst T-Handle shifter knob! This shift
handle is embossed with the Hurst "H" logo and 4-speed
shift pattern for a true muscle car look. Available in
your choice of black or white molded plastic.
Note: Jam nut not included.
1530041 black handle with 3/8" thread .. 44.99 ea
1530043 white handle with 3/8" thread .. 44.99 ea
Shifter Accessories
FMB71
MP80101
MP88100
MA759
MA760
Floor Mount Shifter Boot and Ring
MD4006
MA761
MP80102
MP80103
MP80104
MB561
MN1752
MB560
Floor mount shifter boots and retaining ring are
the perfect match for Lokar’s floor mount shifters.
Available with a stunning stainless steel, brilliant billet
aluminum or beautiful black billet aluminum mounting
ring. Inner ring dimensions measure 5-1/2" x 4". Outer
ring dimensions are 6-3/4" x 5-1/4".
FMB70 stainless steel ............................ 39.99 ea
FMB71 billet aluminum ........................ 64.99 ea
FMB72 black billet aluminum............... 64.99 ea
Super Boot & Plate
Designed for large hole shifter installations, the Hurst
Super Boot & Plate measures 7-3/4" x 8-3/4". Includes
boot, chrome ID plate and mounting hardware. For
Competition/Plus shifters.
1147494
MB562
MD4007
MD4008
MB761
Super Boot & Plate ................ 54.99 ea
MD4009
Note: *Not correct for 1971-72 B-Body Models with bench seat or bucket seats with fold-down armrest.
A-Body Shifter Boots
Manual Transmission
MP80101 1963-65 floor-type ............... 99.99
MP88100 1966-68 w/A383 shifter ....... 49.99
MA759 1966-76 upper, w/console.... 74.99
MA760 1966-76 lower ...................... 41.99
Automatic Transmission
MD4006 1966-74 lower, w/console.... 31.99
A-Body Shifter Boot Bezels
Manual Transmission
MA761 1966-76 w/o console............ 19.99
B-Body Shifter Boots
Manual Transmission
MP80102 1963-65 lower ...................... 164.99
MP80103 1963-65 upper, w/console.... 179.99
MP80104 1963-65 upper, w/o console. 164.99
MP88100 1966-68 w/A383 shifter ....... 49.99
MB561 1966-69 upper, w/console.... 74.99
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
ea
B-Body Shifter Boots - Continued
Manual Trans w/Hurst Pistol Grip
MB560 1970
lower, w/console.... 84.99 ea
MB562 1970
upper, w/console.... 84.99 ea
MD4007 1971-74 upper, w/console.... 41.99 ea
MD4008 1971-72 w/o console............ 44.99 ea
MD4006 1966-74 lower, with console... 31.99 ea
B-Body Shifter Boot Bezel
Manual Transmission with Hurst Pistol Grip Shifter
MB761 1967-69 w/o console............ 19.99 ea
MD4009* 1971-72 w/o console............ 19.99 ea
E-Body Shifter Boots
MD4007 1970-74 upper, w/console.... 41.99 ea
MD4008 1970-74 w/o console............ 44.99 ea
MD4006 1970-74 lower, w/console.... 31.99 ea
E-Body Shifter Boot Bezel
MD4009 1970-74 w/o console............ 19.99 ea
MA2331
ME1005
1968-74 Shifter Rod Set
Replacement shifter rod sets for 1968-74 A, B, and
E-Body vehicles. Each set includes the rods and ends
for an exact replacement.
MA2331 1968-72 A-Body ................... 94.99 set
MB2457 1968-70 B-Body ................... 94.99 set
MB2458 1971-74 B-Body ................... 94.99 set
ME1005 1970-72 E-Body ................... 124.99 set
ME1006 1973-74 E-Body ................... 114.99 set
Manual Transmission . Shift Boots
503
1963-74 Shifter Boots and Bezels
Replace your deteriorated or missing shift boot to seal the area around the shifter mechanism just like the factory
intended. Upper boots seal the area where the shifter protrudes through the console on console-equipped Models.
Lower boots seal the area where the shift mechanism passes through the floor panel. A variety of applications
are available for 1963-76 A-Body, B-Body and E-Body vehicles.

2016 Mopar Catalog - Classic Industries

Transcription

Similar documents

Rekluse was founded in 2002 on the values of performance, quality

2014 Mopar Catalog - Classic Industries

1955-57 tremec 5-speed transmission installation

Hinson Clutch Components names Chris Green the newest member

Evolution MotorSports engineers and manufactures a direct

Hinson Clutch Components Now Available for 2014 Husqvarna

Crank Rebuild Manual

1100 sr pdf.wps - Katana Owners Club UK

Order Form www.handcycle.net

STM-RT_86-95 Suzuki Samurai Transmission