- SCM Group

ENG
easy order az
batch 1 squaring-edgebanding cell
easy order az
batch 1 squaring-edgebanding cell
Immediate and economical production
of batches ranging from single panels
to medium sized runs.
External milling unit
for a precise sizing quality.
MORE PRODUCTIVITY THANKS TO THE WATCH SUPERVISOR
•Rapid and correct insertion of the panels in the cell,
thanks to the SIDE FINDER technology that, via a display
in the operating position, shows the operator which edge
to insert in the cell next.
•Preliminary simulation of machining times.
•Immediate availability (even on mobile devices)
of the machining information relating to each panel,
regardless of where the panel is in the cycle, due to
the continuous tracking provided by the supervisor system.
•Check of machining feasibility for each component.
EASY ORDER AZ
Main technical data
Machinable dimensions with lengthwise feeding (length x width mm)
Machinable dimensions with crosswise feeding (length x width mm)
Space required (mˆ2)
Number of operators
Productivity
Machining operation with panel squaring
Panel sizing operation
Possibility of finish quality checking
Side finder technology for intelligent recognition of the edge to be inserted
Possibility to process panels with different thickness, dimensions or machining without stopping the cell
min. 250 x 130
max. 3000 x 1200
min. 130 x 250
max. 1200 x 3000
Approx. 250
1
* Approx. 800-1000
yes
yes
yes
yes
yes
Continuous optimization of the panel gap depending on the machined panel
yes
Flexible management of gluing technology
EVA/PU/SLIM LINE/
LASER
* The performance of the cell depends on the efficiency of the operator and the variety of the panel process.
7050
2510
1600
13670
3200
2260
4415
11000
1600
1440
2510
1280
440
1440
1280
25460
SIMPLE AND PRECISE PROCESSING STEPS
1
2
3
4
LENGTHWISE FEEDING
First pass - Sizing with the correct dimension of both
longitudinal sides and edge application on the first long
edge.
Second pass - Edgebanding of the second long edge.
CROSSWISE FEEDING
Third pass - Squaring, sizing machining and edgebanding
on the first short edge.
Fourth pass - Squaring, sizing machining and edgebanding
on the second short edge.
SCM GROUP SPA STEFANI - Via del Lavoro, 1/3 - PO Box 168 - 36016 Thiene (VI) - Italy
Tel. +39 0445 359511 - Fax +39 0445 359599 - stefani@scmgroup.com - www.scmgroup.com
0000555552C
Rev. n. 01 - 01.2014 - AD Lifeinpixel -