P2D2A_Datasheet_Pg1_v2 - Rincon Research Corporation

PACKETS - TO -A NALOG C ONVERTER
P2A
Wideband. Reconfigurable. Scalable.

SDDS data inputs via 10G interfaces
 L-Band analog output (950–1750 MHz)

1800 MSPS 14-bit dual channel D/A converter
 6 Channel output per D/A
4 40 MHz BW streams
2 80 MHz BW streams
 1.5 GB DDR memory per D/A channel
 Allows absorption of large network latency
Independent configuration for each input stream
 Programmable attenuator (31.5dB, 0.5dB Steps)
 Accepts external 10 MHz reference (optional)

Command/Control via dedicated Ethernet interface
 Redundant, hot-swappable power supplies
RINCON RESEARCH CORPORATION’S P2A FAMILY BUILDS UPON
THE P2A’S LARGE NETWORK BUFFER FEATURE provides
A DECADE of
uninterrupted data playback even with large network latency.
experience fielding wideband RF systems. The
P2A uses multi-rate signal processing techniques to combine
The configurable network buffer also enables the P2A to
up to 6 SDDS packet streams into a single
generate long periods of continuous data even with
frequency-multiplexed D/A output.
non-coherent reference clocks.
The compact 19-inch rackmount (1U) chassis contains the RF
components required for connecting directly to L-Band analog
modems, block upconverters, or a signal distribution
infrastructure. The integrated high-performance cavity filter
provides a spectrally-clean L-Band output from 950 MHz to
BUILT UPON HIGH-PERFORMANCE FPGA TECHNOLOGY, the P2A
supports seamless in-field firmware upgrades to meet the
demands of evolving requirements. Our scalable solution
makes it easy to deploy and maintain hundreds of units.
1750 MHz.
OUTPUT SPECTRUM
The 10 G Ethernet SDDS inputs feed a flexible de-packetizer
40 MHz Bandwidth
80 MHz Bandwidth
that can be configured to receive multicast or unicast data
from multiple sources across multiple VLANs. The P2A
supports both 40 and 80 MHz bandwidth signals.
900
MHz
ADDRESS
101 N. Wilmot Rd., Ste. 101
Tucson, Arizona 85711
ORDER LINE
520.519.3131
sales@rincon.com
1000
MHz
1100
MHz
1200
MHz
1300
MHz
1500
MHz
TECH SUPPORT
520.519.3132
tech-line@rincon.com
INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE ▪ PRODUCTS ARE SUBJECT TO THE RESTRICTIONS OF THE ARMS EXPORT CONTROL ACT
1700
MHz
1800
MHz
FAX | WEB
520.519.3120
www.rincon.com
▪ V 1.2
SYSTEM: P2A
DSPBrik II – X7D2285-X330C1
1.5 GB
Buffer
10 GbE
SFP+
Six-Stream
Depacketizer
Sub-Band Combiner (x6)
40 MHz (x4)
80 MHz (x2)
DAC O
L-Band Filter
+ Amp
10 GbE
SFP+
Six-Stream
Depacketizer
Sub-Band Combiner (x6)
40 MHz (x4)
80 MHz (x2)
DAC 1
L-Band Filter
+ Amp
L-Band
950-1750 MHz
L-Band
950-1750 MHz
®
10MHz
Virtex 7 VX330T
FPGA
Timing
I/F
1PPS
1.5 GB
Buffer
IRIG-B
GENERAL
SPECIFICATIONS
AN ALOG OUTPUT
SPECIFICATIONS
ORDERING
INFORMATION
Power Connector
NEMA5-15
Analog
P2A – G D S A – A2P – C P – F B L R
Power
110/220VAC
50/60 Hz,
300 Watts (Max)
Number of 10 G
Ethernet Inputs
1 per D/A, up to 8
Number of
D/A Outputs
Up to 8
Command/Control
10/100/1000
Ethernet, RJ45
Dimensions
40 MHz: -21 dBm max,
80 MHz: -18 dBm max,
50 ohm,
AC coupled,
950-1750 MHz
SMA connector
Call for availability and custom configurations.
P2A
G: Number of 10 GbE inputs
(One per DAC channel, standard)
D: Number of wideband DAC channels
(1, 2, 4, 6, or 8)
S: Output splitter width per channel
(1, 2, 4, or 8)
A: Integrated amplifier per channel
N: Not present
A: Present on all channels
Clock/Reference
750mVpp - 2Vpp
(1.5dBm - 10dBm)
50 ohm, AC Coupled,
sine or square wave,
SMA connector
1PPS
CMOS compatible
50 ohm,
SMA connector
A2P
IRIG-B: 0.5Vpp 6Vpp, 50 ohm,
1kHz AM,
SMA NMEA-0813:
RS-232 signal Level,
LEMO connector,
DB9 adapter supplied
F: 10 GbE input media
S: Short range fiber, 850 nm
L: Long range fiber, 1310 nm
C: Direct-attach copper cable, 3 ft.
1U-19” Rack
mount x 26” D
Time
Data Connector
Digital Data
Format
ADDRESS
101 N. Wilmot Rd., Ste. 101
Tucson, Arizona 85711
10G Ethernet,
SFP+ modules
(included), SR/LR fiber
or direct attach copper
SDDS, 80 and 40 MHz
Bandwidths
Standard configuration
assumes df/dt = 0.
ORDER LINE
520.519.3131
sales@rincon.com
C: Number of L-Band ADC inputs
P: Number of 10 GbE outputs (0, 1, 2, 4,or 8)
B: X7D2285 Boot Mode
N: NFS
F: Internal flash
L: Flash Lock
U: Unlocked (write-enabled) flash
L: Locked (write-protected) flash
R: Rack-mount slides
N: no slides
28: 28 inch slides
30: 30 inch slides
TECH SUPPORT
520.519.3132
tech-line@rincon.com
INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE ▪ PRODUCTS ARE SUBJECT TO THE RESTRICTIONS OF THE ARMS EXPORT CONTROL ACT
FAX | WEB
520.519.3120
www.rincon.com
▪ V 1.2