docEndopore Implants with external hex
download 
Report Transcription
Endopore Implants with external hex
PerfeCT SURFACE Osteotome PROCEDURES EXTERNAL HEX peRfect INTERNAL HEX INTERNAL ENDOPORE Product Catalog ® PERFECT SURFACE Implant Placement Procedure ENDOPORE® Table of Contents ENDOPORE® Contents Endopore Implants with internal connection Endopore Implants with external Hex 4 E ndopore Implants with internal connection for one-stage surgery 5 Case Planning Chart 21 E ndopore External Hex Connection implants for one-stage and two-stage surgery 23 Case Planning Chart 7 7 7 8 Crown and Bridge Restorations Cover Screws Cementable Abutments ECO Abutment System Octabutment System 9 10 10 Overdenture Restorations Locator System Dalla Bona Abutment System O-Ring Abutment System Endopore Implants with internal Hex 11 E ndopore Implants for one-stage and two-stage surgery 12 Case Planning Chart 14 14 15 15 15 16 16 17 Crown and Bridge Restorations Cover Screws Healing Abutments Transfer Copings Implant Analogs Retaining Screws Hexed Abutments Angled Abutments UCLA Abutments 18 19 19 20 Overdenture Restorations Locator System O-Ring Abutment System Dalla Bona Abutment System UMA System Internet 26 26 27 28 28 29 30 30 31 Crown and Bridge Restorations Cover Screws Healing Abutments Transfer Copings Implant Analogs Retaining Screws Hexed Abutments Angled Abutments Temporary Titanium Abutments UCLA Abutments 32 32 33 34 Overdenture Restorations Locator System O-Ring Abutment System Dalla Bona Abutment System UMA System 36 Prosthetic Instrumentation Surgery 38 Endopore Surgical Kits 39 Endopore Surgical Instrumentation 42 Articles in alphabetical order All print material released by Oraltronics is available online, too. Product catalogs and insertion brochures as well as information for patients or current case reports – it takes you only 4 steps to get to the print product desired. Just click under www.oraltronics.com ENDOPORE® Internal connection E ndopore Implants with internal connection for one-stage surgery The Endopore implants have a standard Morse Taper implant-to-abutment interface and are supplied in both 4.1 mm and 5.0 mm implant diameters, each having a 4.8 mm abutment platform diameter. This allows both the 4.1 mm and 5.0 mm diameter implants to accept the same prosthetic components. Each implant diameter is available with a 1.8 mm transgingival collar. A 1 mm low profile cover screw is packaged with each implant. AP* TC* Length Item No. Implant Ø 4.1 mm 4.8 mm AP* 4.8 mm 1.8 mm 7 mm 01S-7I1.8 4.8 mm 1.8 mm 9 mm 01S-9I1.8 4.8 mm 1.8 mm 12 mm 01S-12I1.8 1.8 mm TC* Length Diameter * AP– Abutment Platform Ø **TC – Transgingival Collar Implant Ø 5.0 mm 4.8 mm 1.8 mm 5 mm 01WS-5I1.8 4.8 mm 1.8 mm 7 mm 01WS-7I1.8 4.8 mm 1.8 mm 9 mm 01WS-9I1.8 4.8 mm 1.8 mm 12 mm 01WS-12I1.8 ENDOPORE® BICORTICAL Internal connection ® Case Planning Chart One-stage Surgery Angled Cementable Straight Cementable Crown ECO Abutment Octabutment Bridge Locking Crown Non-Locking Bridge Bar ENDOPORE® Internal connection Case Planning Chart One-stage Surgery Locator System O-Ring System Impression Stage Laboratory Processing Final Restoration Overdenture Dalla Bona System Internal connection ENDOPORE® BICORTICAL ® Crown and Bridge Restorations Cover Screws Length Item No. Cover Screw (replacement) A 1 mm cover screw is packaged with each implant. 1 mm 2 mm 3 mm 4 mm 02S-1HS 02S-2HS 02S-3HS 02S-4HS Cementable Abutments Length Item No. Straight Cementable Abutments 4.0 mm 5.5 mm 7.0 mm 05S-4.0FS 05S-5.5FS 05S-7.0FS Angled Cementable Abutments Angle 15° Angle 25° 05S-15FA 05S-25FA 15° ECO Abutment System Item No. ECO Abutment and Cap for cementable restorations Length 5.0 mm (7.0 mm with cap) 05S-5ABUT/WC ECO Analog 7.0 mm 06S-ANALOG ECO Coping – Indexed 06S-COPING/I ECO Coping – Non Indexed 06S-COPING 5.0 mm ECO Abutment ECO Analog ECO Coping – Indexed ECO Coping – Non Indexed ENDOPORE® Internal connection Octabutment System Item No. The Octabutment System is used for all procedures where a removable prosthesis is required, or where a working model incorporating an abutment analog is desired. Octabutment 07S-0010 Octabutment Cap with Screw 07S-2100 Transfer Coping with Guide Pin for Octabutment 07S-0090 Octabutment Analog 07S-0015 Temporary Abutment for Octabutment locking 07S-0303 Temporary Abutment for Octabutment non-locking 07S-0353 Octabutment Cap with screw Transfer Coping Octabutment Analog locking non-locking locking non-locking Temporary abutments include an octabutment retaining screw. Plastic Coping for Octabutment locking 07S-0203 Plastic Coping for Octabutment non-locking Note: Plastic copings include an octabutment retaining screw. 07S-0253 Octabutment Retaining Screw 07S-0053 Accessories Item No. Insertion Tip for the ECO and Cementable Abutment 07S-0176 Insertion Tip for Octabutment 07S-0175 Driver Housing 07-0190 Driver Tip 0.05“ Hex Tip 06-TWHT Hex Tip 12.5 mm Insertion Tip Insertion Tip for Octabutment Driver Housing 0.05“ Hex Tip Internal connection ENDOPORE® BICORTICAL ® Overdenture Restorations Locator Abutments Impl. Ø mm Collar Item No. The Locator abutment is an attachment with a self-aligning feature. This feature will aid patients in seating their denture and eliminate additional wear from improper seating. 4.1/ 5.0 mm 4.1/ 5.0 mm 4.1/ 5.0 mm 4.1/ 5.0 mm 0.73 mm 2 mm 3 mm 4 mm 8950 8951 8952 8953 Locator Attachments Item No. Locator Attachments Item No. Locator Male Processing Package 2 Sets, each Set includes: 1 Processing Replacement Male 8515, 1 Replacement Male 8524/ 8527/8529, 1 Spacer white 8519 Locator Extended Range Replacement Male green, 4 Pack 8547 8548 Locator Replacement Male clear, 4 Pack 8524 Locator Extra Light Extended Range Male red, 4 Pack 8515 Locator Light Retention Replacement Male pink, 4 Pack 8527 Locator Black Processing Replacement Male 4 Pack Locator Extra Light Retention Replacement Male, blue, 4 Pack 8529 Locator Parallel Post 4 Pack 8517 Locator Impression Coping 4 Pack 8505 Locator Female Analog 5 mm Diameter. 4 Pack 8516 Angle Measurement Guide 9530 4.8 mm Abutment Platform With the Locator’s minimal vertical height, it is ideal where interocclusal space is limited. This abutment can also accommodate up to 40° between implants. Locator Parallel Post Locator Impression Coping Female Analog Ø 5 mm Angle Measurement Guide Locator Core Tool 8393 Locator Abutment Driver 15 mm length 21 mm length 8926 8927 20 Ncm Torque Wrench (Ncm – Newton centimeters) 06-TW20 ENDOPORE® Internal connection Overdenture Restorations Dalla Bona and O-Ring Abutment Systems Item No. The ORS and the Dalla Bona abutments lie flush with the top of the implant when the abutments are inserted into the Endopore One-Stage implants. Note Please refer to pages 32 – 33 for Dalla Bona Abutment System and O-Ring Abutment System. Dalla Bona Abutment System Each Dalla Bona System includes a titanium male abutment, a brass abutment analog, a titanium female with a PVC ring and a spacer. 07S-3000 O-Ring Abutment System Each O-Ring System includes a titanium male abutment and an ORS lab kit which includes a brass abutment analog, metal housing, 3 red O-Rings and 3 white O-Rings. 07S-4000 Accessories Item No. Driver Housing 07-0190 Abutment Driver for ORS and Dalla Bona System 07-0140 Dalla Bona Activating Tool An instrument used to increase the retention of an attachment 07-1017 Dalla Bona Deactivating Tool An instrument used to reduce the retention of an attachment 07-1018 10 Note The red O-Ring is used for laboratory set-up and the white O-Ring is used for the finished overdenture. Internal hex ENDOPORE® BICORTICAL ® E ndopore Implants with internal hex for one-stage and two-stage surgery Endopore Implants with internal hex are supplied in both 4.1 mm and 5.0 mm implant platforms. A low profile cover screw is packaged with each implant. 11 SCR* Length Item No. Implant Ø 4.1 mm SCR* Length 2 mm 7 mm 01l-7I2 2 mm 9 mm 01l-9I2 2 mm 12 mm 01l-12I2 Implant Ø 5.0 mm Diameter *SCR – Smooth Coronal Region 2 mm 7 mm 01Wl-7I2 2 mm 9 mm 01Wl-9I2 2 mm 12 mm 01Wl-12I2 ENDOPORE® Internal hex Case Planning Chart 12 Flared Healing Straight Healing Abutment Abutment One- and twostage Surgery Flared Transfer Straight Transfer Coping Assembly Coping Assembly Impression Stage Flared Hexed Angled Hexed Angled Hexed Straight Hexed Hexed UCLA Non-Hexed UCLA Abutment Abutment Abutment Abutment Abutment Abutment Laboratory Processing 15° Final Restoration 25° Crown Bridge Internal hex ENDOPORE® BICORTICAL ® Case Planning Chart One- and twostage Surgery Straight Healing Abutment 13 Locator O-Ring Dalla Bona System System (ORS) System Impression Stage Laboratory Processing Final Restoration Overdenture ENDOPORE® Internal hex Crown and Bridge Restorations 14 Cover Screws Impl. Ø mm Item No. Cover Screw (replacement) A low profile cover screw is packaged with each implant. 4.1 mm 5.0 mm 02I-CS 02WI-CS Healing Abutments Impl. Ø mm Length Width Item No. Straight Healing Abutments The straight healing abutment is used in all situations except where an expanded gingival cuff is desired. 4.1 mm 4.1 mm 4.1 mm 3 mm 5 mm 7 mm 4.1 mm 4.1 mm 4.1 mm 02B-3HS 02B-5HS 02B-7HS 5.0 mm 5.0 mm 5.0 mm 3 mm 5 mm 7 mm 5.0 mm 5.0 mm 5.0 mm 02WB-3HS 02WB-5HS 02WB-7HS Flared Healing Abutments The use of a flared healing abutment allows the gingiva to heal around this expanded profile, where a more natural emergence profile is preferred. 4.1 mm 4.1 mm 4 mm 6.5 mm 5.5 mm 5.5 mm 02B-4H 02B-6.5H 5.0 mm 5.0 mm 4 mm 6.5 mm 6.4 mm 6.4 mm 02WB-4H 02WB-6.5H Width Width Length Length Straight Healing Flared Healing Abutment Abutment Internal hex ENDOPORE® BICORTICAL ® Transfer Copings The shape of the transfer coping matches the shape of the corresponding healing abutment and this allows the profile of the gingival cuff to be accurately reproduced in the working model. Transfer Copings Impl. Ø mm Length Item No. Straight Transfer Copings for use with straight healing abutments, incl. screw 4.1 mm 5.0 mm 11 mm 11 mm 06I-CTCA/S 06WI-CTCA/S Flared Transfer Copings for use with flared healing abutments incl. screw 4.1 mm 5.0 mm 11 mm 11 mm 06I-CTCA/F 06WI-CTCA/F 4.1 mm 5.0 mm 16 mm 16 mm 06B-TC/SL 06B-TC/SL Transfer Coping Screw, long for optional use with transfer copings, when an „open tray” technique is used 15 Straight Transfer Flared Transfer Transfer Coping Coping Coping Screw Implant Analogs Impl. Ø mm Length Qty. Item No. Implant Analogs Material: Stainless Steel 4.1 mm 5.0 mm 9 mm 9 mm 1 1 06I-PIA 06WI-PIA Retaining Screws (replacement) Impl. Ø mm Item No. Titanium Alloy Replacement Screw 4.1/ 5.0 mm 05B-2RS Gold Alloy Replacement Screw 4.1/ 5.0 mm 05B-2RS/G for use with hexed and UCLA abutments All abutments are packaged with a titanium retaining screw. ENDOPORE® Internal hex Hexed Abutments Impl. Ø mm Length Collar Item No. 4.1 mm 4.1 mm 4.1 mm 7 mm 9 mm 11 mm 1.5 mm 3.5 mm 5.5 mm 05I-7FN 05I-9FN 05I-11FN 5.0 mm 5.0 mm 5.0 mm 7 mm 9 mm 11 mm 1.5 mm 3.5 mm 5.5 mm 05WI-7FN 05WI-9FN 05WI-11FN These abutments are used for cement retain ed crown or bridge restorations. Straight Hexed Abutments Retaining screw included The straight hexed abutment has a parallel sided transgingival collar. Length Collar 16 Flared Hexed Abutments Retaining screw included The flared hexed abutment is designed for restorations requiring a natural emergence profile. 4.1 mm 8.5 mm 2 mm 05I-8.5UN 5.0 mm 8.5 mm 2 mm 05WI-8.5UN Length Collar Angled Abutments Impl. Ø mm Length Angle Item No. Angled Hexed Abutments Retaining screw included Angled abutments compensate for large diver gences in implant alignment. Angled guide pins are available in the Prosthetic Instrumentation section of this catalog. 4.1 mm 4.1 mm 11 mm 11 mm 15° 25° 05I-15FA 05I-25FA 5.0 mm 5.0 mm 11 mm 11 mm 15° 25° 05WI-15FA 05WI-25FA 15° 25° Internal hex ENDOPORE® BICORTICAL ® UCLA Abutments UCLA abutments provide a foundation to which wax can be added to shape a screwretained crown or bridge or a custom abut ment. See the Prosthetic Instrumentation section for the lapping tool used to polish the cast surface that will mate with the implant. A reamer is also available to clean out the retaining screw hole in the casting. Gold base Hexed UCLA abutments should be used for custom abutments and for supporting crowns as they will resist the rotational forces associated with single tooth screw retained restorations. UCLA Abutments Impl. Ø mm Item No. 4.1 mm 5.0 mm 06I-UCLA/H 06WI-UCLA/H 4.1 mm 5.0 mm 06I-UCLA 06WI-UCLA UCLA Plastic Abutments Retaining screw included Hexed Non-Hexed UCLA Gold Base Abutments Non-Ceramic Alloy Retaining screw included Hexed abutments have machined surfaces and will not require finishing with these tools. 17 4.1 mm 5.0 mm 06I-UCLA/H/GNC 06WI-UCLA/H/GNC Non-Hexed 4.1 mm 5.0 mm 06I-UCLA/GNC 06WI-UCLA/GNC Important The melting range is 1,400 – 1,490˚C (2,550 – 2,710˚F), refer to package instructions for further details. UCLA Plastic UCLA Plastic UCLA Gold Base UCLA Gold Base Abutment Abutment Abutment Abutment Hexed Non-Hexed Hexed Non-Hexed ENDOPORE® Internal hex Overdenture Restorations Locator Abutments Impl. Ø mm The Locator abutment is an attachment with a self-aligning feature. This feature will aid patients in seating their denture and eliminate additional wear from improper seating. 4.1 mm 4.1 mm 4.1 mm 4.1 mm 4.1 mm 4.1 mm 0 mm 1 mm 2 mm 3 mm 4 mm 5 mm 8145 8146 8147 8148 8149 8150 5.0 mm 5.0 mm 5.0 mm 5.0 mm 5.0 mm 5.0 mm 1 mm 2 mm 3 mm 4 mm 5 mm 6 mm 8164 8165 8166 8167 8168 8169 With the Locator’s minimal vertical height, it is ideal where interocclusal space is limited. This abutment can also accommodate up to 40° between implants. 18 Collar Item No. Locator Attachments Item No. Locator Attachments Item No. Locator Male Processing Package 2 Sets, each Set includes: 1 Processing Replacement Male 8515, 1 Replacement Male 8524/ 8527/8529, 1 Spacer white 8519 Locator Extended Range Replacement Male green, 4 Pack 8547 Locator Extra Light Extended Range Male red, 4 Pack 8548 Locator Black Processing Replacement Male 4 Pack 8515 Locator Replacement Male clear, 4 Pack Locator Light Retention Replacement Male pink, 4 Pack 8524 8527 Locator Extra Light Retention Replacement Male, blue, 4 Pack 8529 Locator Parallel Post 4 Pack 8517 Locator Impression Coping 4 Pack 8505 Locator Female Analog 4.1 mm Diameter. 4 Pack 5.0 mm Diameter. 4 Pack 8530 8516 Angle Measurement Guide 9530 Locator Core Tool 8393 Locator Abutment Driver 15 mm length 21 mm length 8926 8927 20 Ncm Torque Wrench 06-TW20 Locator Parallel Post Locator Impression Coping Female Analog Ø 4.1 mm Female Analog Ø 5.0 mm Angle Measurement Guide Internal hex ENDOPORE® BICORTICAL O-Ring Abutment System (ORS) Impl. Ø mm Collar Length Item No. O-Ring Abutment System The red O-Ring is used for laboratory set-up and the white O-Ring is used for the finished overdenture. The O-Ring abutment system can accommodate up to 5 degrees of divergence between implants. Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 1 mm 2 mm 3 mm 4 mm 5 mm 6 mm 7 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 04I-1ORS 04I-2ORS 04I-3ORS 04I-4ORS 04I-5ORS 04I-6ORS 04I-7ORS Note Please refer to page 32 for O-Ring Abutment System. Ø5.0 Ø5.0 Ø5.0 Ø5.0 Ø5.0 Ø5.0 1 mm 2 mm 3 mm 4 mm 5 mm 5 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm O-Ring Accessories Item No. Item No. O-Ring Lab Kit 06-ORS 06-O/ORS Metal Housing 07-0044 Dalla Bona Abutment System Impl. Ø mm Collar Length Item No. Dalla Bona Abutment System The Dalla Bona abutment is a ball & socket type connector. Its spherical design allows up to 15 degrees divergence between the abutments. Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 1 mm 2 mm 3 mm 4 mm 5 mm 6 mm 7 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 04I-1DB 04I-2DB 04I-3DB 04I-4DB 04I-5DB 04I-6DB 04I-7DB Ø5.0 Ø5.0 Ø5.0 Ø5.0 Ø5.0 Ø5.0 Ø5.0 1 mm 2 mm 3 mm 4 mm 5 mm 6 mm 7 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 04WI-1DB 04WI-2DB 04WI-3DB 04WI-4DB 04WI-5DB 04WI-6DB 04WI-7DB Each O-Ring System includes a titanium male abutment and an ORS lab kit which includes a brass abutment analog, metal housing, 3 red O-Rings and 3 white O-Rings. Each Dalla Bona System includes a titanium male abutment, a brass abutment analog, a titanium female with a PVC ring and a spacer. Note Please refer to page 33 for Dalla Bona Abutment System. Dalla Bona Accessories Item No. Dalla Bona Replacement Female Cap Includes a brass abutment analog, a titanium female with a PVC ring and a spacer. 07-1012 Dalla Bona Activating Tool An instrument used to increase the retention of an attachment. 07-1017 Dalla Bona Deactivating Tool An instrument used to reduce the retention of an attachment. 07-1018 ® 04WI-1ORS 04WI-2ORS 04WI-3ORS 04WI-4ORS 04WI-5ORS 04WI-6ORS White O-Rings Package of 10 19 ENDOPORE® Internal hex UMA System Impl. Ø mm Collar Item No. UMA System Abutments The UMA (Universal Modification Abutment) system is used for screw retained restorations where it is desired to have the points of attachment superior to the soft tissue. Where there is insufficient clearance to use a UMA or when a sub-gingival separation is desired, a UCLA abutment can be used to achieve separation of the restoration at the implant level. Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 2.0 mm 3.0 mm 4.0 mm 5.0 mm 6.0 mm 7.0 mm 8.0 mm 02I-2.0UMA 02I-3.0UMA 02I-4.0UMA 02I-5.0UMA 02I-6.0UMA 02I-7.0UMA 02I-8.0UMA Ø5.0 Ø5.0 Ø5.0 Ø5.0 3.0 mm 4.0 mm 5.0 mm 6.0 mm 02WI-3.0UMA 02WI-4.0UMA 02WI-5.0UMA 02WI-6.0UMA The UMA is a transmucosal collar that should be secured to the implant with 30 Ncm of torque. The UMA screw used to secure the restoration to the abutment is packaged with each UMA plastic coping. A 0.05“ hex driver is used to secure the screw which should only be tightened to 20 Ncm. 20 Note Please refer to pages 34 – 35 for UMA System. External hex ENDOPORE® BICORTICAL ® E ndopore Implants with external hex for one-stage and two-stage surgery Endopore Implants with external hex are compatible with a wide variety of prosthetic products for crown and bridge and overdenture restorations including UCLA, UMA, Dalla Bona, Overdenture and O-Ring Abutment Systems. All implants are packaged with colour coded labels that identify their diameters. All prosthetic components must be matched to the diameter of implant to which they are to be connected. Abutment labels have the same color coding as the corresponding implants. 21 ENDOPORE® External hex Endopore Implants with external hex The Endopore External Hex Connection implants are available in three diameters: 3.5 mm, 4.1 mm and 5.0 mm. A low profile cover screw is packaged with each implant. The 4.1 mm and 5.0 mm diameter are available with a 1 mm or 2 mm smooth coronal region. The 3.5 mm diameter implant is available in a 1 mm smooth coronal region. 22 3.5 mm diameter implant The 3.5 mm diameter implant is packaged in a red labeled box (01M-range). This implant has a 0.9 mm high x 2.0 mm flat-toflat hex and a UNF thread. 4.1 mm diameter implant The 4.1 mm diameter implants with the industry standard hex are packaged in green labeled boxes (01B-range). These implants have a 0.7 mm high x 2.7 mm flat-to-flat hex and a metric thread. 5.0 mm diameter implant SCR* The 5.0 mm diameter implants are packaged in turquoise labeled boxes (01WB-range). These implants have a 0.9 mm high x 2.7 mm flat-to-flat hex and metric thread. Length SCR* Diameter Length Item No. SCR* 1 mm Implant Ø 3.5 mm Length 1 mm 9 mm 01M-9I1 Implant Ø 4.1 mm Diameter SCR* 2 mm 1 mm 2 mm 7 mm 7 mm 01B-7I1 01B-7I2 1 mm 2 mm 9 mm 9 mm 01B-9I1 01B-9I2 1 mm 2 mm 12 mm 12 mm 01B-12I1 01B-12I2 Implant Ø 5.0 mm Length *SCR – Smooth Coronal Region Diameter 1 mm 5 mm 01WB-5I1 1 mm 2 mm 7 mm 7 mm 01WB-7I1 01WB-7I2 1 mm 2 mm 9 mm 9 mm 01WB-9I1 01WB-9I2 1 mm 2 mm 12 mm 12 mm 01WB-12I1 01WB-12I2 External hex ENDOPORE® BICORTICAL ® Case Planning Chart One- and twostage Surgery Flared Healing Straight Healing Abutment Abutment Impression Stage Flared Transfer Straight Transfer Coping Assembly Coping Assembly Flared Hexed Angled Hexed Angled Hexed Straight Hexed Hexed UCLA Non-Hexed UCLA Abutment Abutment Abutment Abutment Abutment Abutment Laboratory Processing 15° Final Restoration 25° Crown Bridge 23 ENDOPORE® External hex Case Planning Chart One- and twostage Surgery Straight Healing Abutment 24 Locator O-Ring Dalla Bona System System System Impression Stage Laboratory Processing Final Restoration Overdenture External hex ENDOPORE® BICORTICAL ® Case Planning Chart UMA Healing Cap Standard UMA System Abutment One- and twostage Surgery 25 Single Crown Bridge, Bar and Clip O-Ring Impression Stage Step 1 Step 1 Step 2 Step 2 Laboratory Processing Final Restoration Crown Bridge Bar Overdenture ENDOPORE® External hex Crown and Bridge Restorations 26 Cover Screws Impl. Ø mm Item No. Cover Screw (replacement) A low profile cover screw is packaged with each implant. 3.5 mm 4.1 mm 5.0 mm 02M-CS 02B-CS 02WB-CS Healing Abutments Impl. Ø mm Length Straight Healing Abutments The straight healing abutment is used in all situations except where an expanded gingival cuff is desired. Ø 3.5 Ø 3.5 Ø 3.5 Ø4.1 Ø4.1 Ø4.1 Flared Healing Abutments The use of a flared healing abutment allows the gingiva to heal around this expanded profile, where a more natural emergence profile is preferred. Width Item No. 3 mm 5 mm 7 mm 3.5 mm 3.5 mm 3.5 mm 02M-3HS 02M-5HS 02M-7HS 3 mm 5 mm 7 mm 4.1 mm 4.1 mm 4.1 mm 02B-3HS 02B-5HS 02B-7HS Ø5.0 Ø5.0 Ø5.0 3 mm 5 mm 7 mm 5.0 mm 5.0 mm 5.0 mm 02WB-3HS 02WB-5HS 02WB-7HS Ø 3.5 Ø 3.5 4 mm 6.5 mm 4.7 mm 4.7 mm 02M-4H 02M-6.5H Ø4.1 Ø4.1 4 mm 6.5 mm 5.5 mm 5.5 mm 02B-4H 02B-6.5H Ø5.0 Ø5.0 4 mm 6.5 mm 6.4 mm 6.4 mm 02WB-4H 02WB-6.5H Width Width Length Length Straight Healing Flared Healing Abutment Abutment External hex Transfer Copings Impl. Ø mm Length Width Item No. ENDOPORE® BICORTICAL ® The shape of the transfer coping matches the shape of the corresponding healing abutment and this allows the profile of the gingival cuff to be accurately reproduced in the working model. Straight Transfer Copings for use with straight healing abutments Flared Transfer Copings for use with flared healing abutments Transfer Coping Screw, long for optional use with transfer copings, when an „open tray” technique is used Ø 3.5 Ø 3.5 11 mm 16 mm 3.5 mm 3.5 mm 06M-CTCA/S 06M-CTCA/SL Ø4.1 Ø4.1 11 mm 16 mm 4.1 mm 4.1 mm 06B-CTCA/S 06B-CTCA/SL Ø5.0 Ø5.0 11 mm 16 mm 5.0 mm 5.0 mm 06WB-CTCA/S 06WB-CTCA/SL Ø 3.5 11 mm 4.7 mm 06M-CTCA/F Ø4.1 Ø4.1 11 mm 16 mm 5.5 mm 5.5 mm 06B-CTCA/F 06B-CTCA/FL Ø5.0 11 mm 6.4 mm 06WB-CTCA/F Ø 3.5 16 mm 06-TC/SL Ø4.1 16 mm 06B-TC/SL Ø5.0 16 mm 06B-TC/SL 27 Closed Impression Straight Transfer Copings 11 mm Flared Transfer Copings 11 mm marking marking marking marking marking Ø 3.5 Open Impression Ø 4.1 marking Ø 5.0 Ø 3.5 Transfer Coping Screw for optional use 16 mm marking Ø 3.5 Ø 4.1 Ø 5.0 Ø 4.1 Ø 5.0 ENDOPORE® External hex Implant Analogs Impl. Ø mm Implant Analogs Material: Aluminum Ø 3.5 Ø 3.5 Implant Analog Material: Stainless Steel Length Qty. Item No. 9 mm 9 mm 1 5 06M-IA/1 06M-IA Ø4.1 Ø4.1 9 mm 9 mm 1 5 06B-IA/1 06B-IA Ø5.0 Ø5.0 9 mm 9 mm 1 5 06WB-IA/1 06WB-IA Ø 3.5 Ø 3.5 9 mm 9 mm 1 5 06M-PIA 06M-PIA/5 Ø4.1 Ø4.1 9 mm 9 mm 1 5 06B-PIA 06B-PIA/5 Ø5.0 Ø5.0 9 mm 9 mm 1 5 06WB-PIA 06WB-PIA/5 Aluminum Stainless Steel 28 Ø 3.5 Ø 4.1 Retaining Screws Ø 5.0 Ø 3.5 Impl. Ø mm Item No. Retaining Screw (replacement) for use with hexed and UCLA abutments Titanium Alloy Replacement Screw Gold Alloy Replacement Screw All abutments are packaged with a titanium retaining screw. Ø 3.5 05-2RS Ø4.1/5.0 05B-2RS Ø 3.5 05M-2RS/G Ø4.1/5.0 05B-2RS/G Ø 4.1 Ø 5.0 External hex Hexed Abutments Impl. Ø mm Length Collar Item No. ENDOPORE® BICORTICAL ® These abutments are used for cement retained crown or bridge restorations. Straight Hexed Abutments Retaining screw included The straight hexed abutment has a parallel sided transgingival collar. These abutments are available in both regular (grooved – FS) and thick wall (not grooved – FN) versions. Ø 3.5 Ø 3.5 Ø 3.5 7 mm 7 mm 9 mm 1.5 mm 1.5 mm 3.5 mm 05M-7FS 05M-7FN 05M-9FN Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 7 mm 7 mm 9 mm 9 mm 11 mm 11 mm 1.5 mm 1.5 mm 3.5 mm 3.5 mm 5.5 mm 5.5 mm 05B-7FS 05B-7FN 05B-9FS 05B-9FN 05B-11FS 05B-11FN Ø5.0 Ø5.0 Ø5.0 Ø5.0 Ø5.0 Ø5.0 7 mm 7 mm 9 mm 9 mm 11 mm 11 mm 1.5 mm 1.5 mm 3.5 mm 3.5 mm 5.5 mm 5.5 mm 05WB-7FS 05WB-7FN 05WB-9FS 05WB-9FN 05WB-11FS 05WB-11FN Length Length Collar FN Flared Hexed Abutments Retaining screw included The flared hexed abutment is designed for restorations requiring a natural emergence profile. These abutments are available in both regular (grooved – UF) and thick wall (not grooved – UN) versions. FS Ø 3.5 Ø 3.5 8.5 mm 9 mm 2 mm 2 mm 05M-8.5UN 05M-9UF Ø4.1 Ø4.1 Ø4.1 8.5 mm 10 mm 11.5 mm 2 mm 2 mm 3.5 mm 05B-8.5UN 05B-10UF 05B-11.5UN Ø5.0 Ø5.0 Ø5.0 8.5 mm 8 mm 10.5 mm 1.5 mm 1.5 mm 3.5 mm 05WB-8.5UN 05WB-8UF 05WB-10.5UN Length Length Collar UN UF 29 ENDOPORE® External hex Hexed Abutments Impl. Ø mm Length Angle Item No. Angled Hexed Abutments Retaining screw included Angled abutments compensate for large divergences in implant alignment. Angled guide pins are available in the Prosthetic Instrumentation section of this catalog, pages 36 – 37. Ø 3.5 Ø 3.5 11 mm 11 mm 15˚ 25˚ 05M-15FA 05M-25FA Ø4.1 Ø4.1 11 mm 11 mm 15˚ 25˚ 05B-15FA 05B-25FA Ø5.0 Ø5.0 11 mm 11 mm 15˚ 25˚ 05WB-15FA 05WB-25FA 15° Temporary Titanium Abutments 30 Impl. Ø mm 25° Item No. Temporary Abutments Retaining screw included Hexed Temporary Abutment Non-Hexed Temporary Abutment Ø 3.5 05M-TEMP/H Ø4.1 05B-TEMP/H Ø5.0 05WB-TEMP/H Ø 3.5 05M-TEMP Ø4.1 05B-TEMP Ø5.0 05WB-TEMP External hex ENDOPORE® BICORTICAL ® Crown and Bridge Restorations UCLA Abutments UCLA abutments provide a foundation to which wax can be added to shape a screw-retained crown or bridge or a custom abutment. See the Prosthetic Instrumentation section for the lapping tool used to polish the cast surface that will mate with the implant. A reamer is also available to clean out the retaining screw hole in the casting. Gold base abutments have ma- chined surfaces and will not require finishing with these tools. Hexed UCLA abutments should be used for custom abutments and for supporting crowns as they will resist the rotational forces associated with single tooth screw retained restorations. Non-hexed UCLA abutments should be used for supporting screw retained bridges. UCLA Abutments Item No. Impl. Ø mm UCLA Plastic Abutments Retaining screw included Hexed, green Hexed, yellow Hexed, blue Ø 3.5 Ø4.1 Ø5.0 06M-UCLA/H 06B-UCLA/H 06WB-UCLA/H Non-Hexed, white Non-Hexed, white Non-Hexed, yellow Ø 3.5 Ø4.1 Ø5.0 06M-UCLA 06B-UCLA 06WB-UCLA 31 Hexed Non-Hexed UCLA Gold Base Abutments, metal alloy for porcelain fusing Retaining screw included Important The melting range is 1232 – 1260˚C (2250 – 2300˚F), refer to package instructions for further details. Hexed Ø 3.5 Ø4.1 Ø5.0 06M-UCLA/H/G 06B-UCLA/H/G 06WB-UCLA/H/G Ø 3.5 Ø4.1 Ø5.0 06M-UCLA/G 06B-UCLA/G 06WB-UCLA/G Non-Hexed UCLA Gold Base Abutments, alloy not for porcelain fusing Retaining screw included Hexed Non-Hexed Important The melting range is 1400 – 1490˚C (2550 – 2710˚F), refer to package instructions for further details. Hexed Gold Base UCLA Abutment Ø 3.5 Ø4.1 Ø5.0 06M-UCLA/H/GNC 06B-UCLA/H/GNC 06WB-UCLA/H/GNC Non-Hexed Gold Base UCLA Abutment Ø 3.5 Ø4.1 Ø5.0 06M-UCLA/GNC 06B-UCLA/GNC 06WB-UCLA/GNC Hexed Non-Hexed ENDOPORE® External hex Overdenture Restorations Locator System Impl. Ø mm The Locator abutment is an attachment with a self-aligning feature. This feature will aid patients in seating their denture and eliminate additional wear from improper seating. 3.5 mm 3.5 mm 3.5 mm 3.5 mm 1 mm 2 mm 3 mm 4 mm 8851 8852 8853 8854 With the Locator’s minimal vertical height, it is ideal where interocclusal space is limited. This abutment can also accommodate up to 40° between implants. 4.1 mm 4.1 mm 4.1 mm 4.1 mm 0.73 mm 2 mm 3 mm 4 mm 8681 8682 8683 8684 Note Please refer to pages 9 and 18 for Locator System and its components. 5.0 mm 5.0 mm 5.0 mm 5.0 mm 1.35 mm 2 mm 3 mm 4 mm 8691 8691 8691 8691 O-Ring Abutment System (ORS) Impl. Ø mm Collar Length O-Ring Abutment System The O-Ring abutment system can accommodate up to 5 degrees of divergence between implants. Ø 3.5 Ø 3.5 Ø 3.5 Ø 3.5 Ø 3.5 1 mm 2 mm 3 mm 4 mm 5 mm 4 mm 5 mm 6 mm 7 mm 8 mm 04M-1ORS 04M-2ORS 04M-3ORS 04M-4ORS 04M-5ORS Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 1 mm 2 mm 3 mm 4 mm 5 mm 6 mm 7 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 04B-1ORS 04B-2ORS 04B-3ORS 04B-4ORS 04B-5ORS 04B-6ORS 04B-7ORS Note The red O-Ring is used for laboratory set-up and the white O-Ring is used for the finished overdenture. Ø5.0 Ø5.0 Ø5.0 Ø5.0 Ø5.0 Ø5.0 1 mm 2 mm 3 mm 4 mm 5 mm 6 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm O-Ring Accessories Item No. O-Ring Lab Kit 06-ORS Metal Housing 07-0044 White O-Rings Package of 10 06-O/ORS 32 Each O-Ring System includes a titanium male abutment and an ORS lab kit which includes a brass abutment analog, metal housing, 3 red O-Rings and 3 white O-Rings. Length Collar Collar Item No. Item No. 04WB-1ORS 04WB-2ORS 04WB-3ORS 04WB-4ORS 04WB-5ORS 04WB-6ORS External hex Dalla Bona Abutment System Impl. Ø mm Dalla Bona Abutment System The Dalla Bona abutment is a ball & socket type connector. Its spherical design allows up to 15 degrees divergence between the abutments. Ø 3.5 Ø 3.5 Ø 3.5 Ø 3.5 Ø 3.5 Ø 3.5 Ø 3.5 Each Dalla Bona System includes a titanium male abutment, a brass abutment analog, a titanium female with a PVC ring and a spacer. Length Collar Collar Length Item No. 1 mm 2 mm 3 mm 4 mm 5 mm 6 mm 7 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 04M-1DB 04M-2DB 04M-3DB 04M-4DB 04M-5DB 04M-6DB 04M-7DB Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 1 mm 2 mm 3 mm 4 mm 5 mm 6 mm 7 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 04B-1DB 04B-2DB 04B-3DB 04B-4DB 04B-5DB 04B-6DB 04B-7DB Ø5.0 Ø5.0 Ø5.0 Ø5.0 Ø5.0 Ø5.0 Ø5.0 1 mm 2 mm 3 mm 4 mm 5 mm 6 mm 7 mm 4 mm 5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 04WB-1DB 04WB-2DB 04WB-3DB 04WB-4DB 04WB-5DB 04WB-6DB 04WB-7DB Dalla Bona Plus Accessories Item No. Dalla Bona Plus Keeping the same benefits as the Dalla Bona System, the Dalla Bona Plus female attachment is a gold insert that can be easily replaced and adjusted with Dalla Bona Plus Activating/Deactivating Tool. Includes a brass abutment analog, a titanium cap with a gold female insert, and a spacer. 07-0480 Dalla Bona Plus Activating/Deactivating Tool An instrument used to increase and reduce the retention of an attachment. 07-0489 Dalla Bona Accessories Item No. Dalla Bona Replacement Female Cap Includes a brass abutment analog, a titanium female with a PVC ring and a spacer. 07-1012 Dalla Bona Activating Tool An instrument used to increase the retention of an attachment. 07-1017 Dalla Bona Deactivating Tool An instrument used to reduce the retention of an attachment. 07-1018 ENDOPORE® BICORTICAL ® 33 ENDOPORE® External hex UMA System Impl. Ø mm UMA System Abutments The UMA (Universal Modification Abutment) system is used for screw retained restorations where it is desired to have the points of attachment superior to the soft tissue. Where there is insufficient clearance to use a UMA or when a sub-gingival separation is desired, a UCLA abutment can be used to achieve separation of the restoration at the implant level. Ø 3.5 Ø 3.5 Ø 3.5 Ø 3.5 The UMA is a transmucosal collar that should be secured to the implant with 30 Ncm of torque. The UMA screw used to secure the restoration to the abutment is packaged with each UMA plastic coping. A 0.05“ hex driver is used to secure the screw which should only be tightened to 20 Ncm. 34 Standard UMA System Abutment The upper diameter for all UMA System Abutments is 3.85 mm. Collar Item No. 3.5 mm 4.5 mm 5.5 mm 6.5 mm 02M-3.5UMA 02M-4.5UMA 02M-5.5UMA 02M-6.5UMA Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 Ø4.1 2.5 mm 3.0 mm 4.0 mm 5.0 mm 6.0 mm 7.0 mm 8.0 mm 02B-2.5UMA 02B-3.0UMA 02B-4.0UMA 02B-5.0UMA 02B-6.0UMA 02B-7.0UMA 02B-8.0UMA Ø5.0 Ø5.0 Ø5.0 Ø5.0 3.5 mm 4.5 mm 5.5 mm 6.5 mm 02WB-3.5UMA 02WB-4.5UMA 02WB-5.5UMA 02WB-6.5UMA Collar UMA Healing Cap Item No. UMA Healing Cap 2 mm length 07-2120 UMA Transfer Copings Item No. UMA Hexed Transfer Coping Single tooth open tray 07-0090 UMA Guide Pin für 07-0090 07-0062 UMA Non-Hexed Transfer Coping for bridge construction 07-0080 External hex UMA Analogs Item No. Brass 07-0015 Stainless Steel UMA retaining screw included 07-0162 Item No. UMA Temporary Non-Hexed Coping UMA retaining screw included 07-0352 UMA Hexed Plastic Coping UMA retaining screw included blue 07-0202 UMA Non-Hexed Plastic Coping UMA retaining screw included yellow 07-0252 UMA Non-Hexed Gold Coping UMA retaining screw included 07-0252/G UMA Replacement Components Item No. UMA Non-Hexed Plastic Coping for Bar 07-0270 UMA Retaining Screw 07-0052 Gold Plated Bar Clip CM Rider 07-0120 UMA Bar Kit Item No. UMA Bar Kit Includes 4 bars, a spacer bar, 4 retaining screws, 4 plastic cylinders, and 4 gold plated clips 07-5540 UMA O-Ring System Item No. UMA O-Ring System Each abutment is packaged with an ORS lab kit that includes a brass abutment analog, metal housing, 3 red O-Rings and 3 white O-Rings. 07-4400 ® Stainless Steel Brass UMA Copings ENDOPORE® BICORTICAL UMA Temporary UMA Hexed Plastic UMA Non-Hexed UMA Non-Hexed Non-Hexed Coping Coping Plastic Coping Gold Coping UMA Hexed Plastic UMA Gold Plated Coping Retaining Srew Bar Clip Note The red O-Ring is used for laboratory set-up and the white O-Ring is used for the finished overdenture. 35 ENDOPORE® Prosthetics Prosthetic Instrumentation Item No. Hex Driver, 0.05“ extra short, 9 mm 06-HDXS short, 13 mm 06-HDS long, 18 mm 06-HDL 18 mm 36 13 mm 9 mm 30 Ncm Torque Wrench 06-TW30 20 Ncm Torque Wrench For use with UMA System and Locator System (Ncm – Newton centimeters) 06-TW20 Driver Housing 07-0190 Driver Extension 07-0195 extra short short long Driver Housing Driver Extension Driver Tips fit Driver Housing and Torque Wrenches 0.05“ Hex Tip 06-TWHT 0.05“ Hex Tip – Short 06-TWHTS UMA Abutment Driver 07-1150 ORS and Dalla Bona Abutment Driver 07-0140 12.5 mm Hex Tip 6.5 mm Hex Tip short UMA Abutment ORS-, Dalla Bona Driver Abutment Driver Prosthetics Prosthetic Instrumentation Item No. Latch Driver 0.05“ Hex Latch Type Driver 07-0125 UMA Friction Grip Driver Friction driver for UMA non-hexed transfer coping and UMA O-Ring Abutment 07-0004 Guide Pin for angled abutment selection 15° angled 06-15AAGP 25° angled 06-25AAGP ENDOPORE® BICORTICAL ® 37 15° Reamer for use with UMA abutment castings for use with UCLA abutment castings 07-0150 06-REM Lapping Tool with guide pin for use with UMA and UCLA abutment castings and all platforms 07-0155WP Waxing Sleeve 06-WS 25° ENDOPORE® Surgery Surgery 38 Comprehensive Surgical Kit Item No. Endopore Surgical Kits Surgical Instrument Tray, fully equipped 06-ITSTART Content of a full equipped tray 2.3 mm Round Bur for use with all Endopore Implants with internal connection, internal hex and external hex. 06-RB 2.5 mm Twist Drill – short 2.5 mm Twist Drill – long 06-2.5TDS 06-2.5TDL 3.5 mm Implant Bur, 4.1 mm Implant Bur, 4.1 mm Implant Bur, 4.1 mm Implant Bur, 5.0 mm Implant Bur, 5.0 mm Implant Bur, 5.0 mm Implant Bur, 5.0 mm Implant Bur, 06M-9IB 06-7IB 06-9IB 06-12IB 06W-5IB 06W-7IB 06W-9IB 06W-12IB 9 mm 7 mm 9 mm 12 mm 5 mm 7 mm 9 mm 12 mm Drill Extension 06-DE 3.5 mm Trial Fit Gage, 9 mm 4.1 mm Trial Fit Gage, 7 mm 4.1 mm Trial Fit Gage, 9 mm 4.1 mm Trial Fit Gage, 12 mm 5.0 mm Trial Fit Gage, 5 mm 5.0 mm Trial Fit Gage, 7 mm 5.0 mm Trial Fit Gage, 9 mm 5.0 mm Trial Fit Gage, 12 mm 06M-9TFG/O 06-7TFG/O 06-9TFG/O 06-12TFG/O 06W-5TFG/O 06W-7TFG/O 06W-9TFG/O 06W-12TFG/O Paralleling Pins, Pack of 4 Mallet Punch Handle, straight Punch Handle, offset Stainless Steel Punch Tip Tip Wrench Hex Driver 0.05“ – short Radiographic Overlays, 2 Pack 06-PP 06-M/L 06-H 06-HOS 06-PTM 06-TW 06-HDS 06-RO Surgical Video on DVD 06-SV Surgical Instrument Tray, empty 06-ITM/S1 Endopore Osteotome Kit Item No. Endopore Osteotome Kit Osteotome Instrument Tray, fully equipped 06-OTKIT Content of a full equipped tray Osteotome Tip #1 Osteotome Tip #2 Osteotome Tip #3 06-OT1 06-OT2 06-OT3 Stainless Steel Punch Tip Punch Handle, straight, Pack of 4 Punch Handle, offset, one Mallet 06-PTM 06-H 06-HOS 06-M/L Osteotome Instrument Tray, empty 06-ITM/S2 Surgery ENDOPORE® BICORTICAL ® Endopore Surgical Instrumentation Burs and Drills Item No. Crestotom for the removal of soft tissue, for smoothing and levelling of the alveor crest 1452 Initial Perforation (IP) Drill for initial perforation of the compact cortical bone, Ø 2.00 90024 Round Bur Ø 2.3 mm 06-RB 39 Twist Drill short, Ø 2.5 mm, total length 30 mm 06-2.5TDS long, Ø 2.5 mm, total length 39 mm 06-2.5TDL Implant Burs Length Item No. for implant Ø 3.5 mm 9 mm 06M-9IB for implant Ø 4.1 mm 7 mm 06-7IB 9 mm 06-9IB 12 mm 06-12IB 5 mm 06W-5IB 7 mm 06W-7IB 9 mm 06W-9IB 12 mm 06W-12IB Implant Burs for implant Ø 5.0 mm ENDOPORE® Surgery Drill Extension Item No. Drill Extension 06-DE Trial Fit Gages/Osteotome Final Tips Length Item No. 9 mm 06M-9TFG/O 7 mm 06-7TFG/O 9 mm 06-9TFG/O 12 mm 06-12TFG/O 5 mm 06W-5TFG/O 7 mm 06W-7TFG/O 9 mm 06W-9TFG/O 12 mm 06W-12TFG/O Trial Fit Gages/Osteotome Final Tips Implant Ø 3.5 mm Implant Ø 4.1 mm Implant Ø 5.0 mm 40 The trial fit gages are threaded to connect to the punch handles. The trial fit gage corresponding to the size of the implant to be placed, acts as the final osteotome tip. Paralleling Pin Item No. Paralleling Pin for use with 2.5 mm twist drill 06-PP Mallet and Punch Handles Item No. Mallet 06-M/L Punch Handles for use in conjunction with osteotome tips and trial fit gages for osteotome technique straight 06-H offset 06-HOS straight offset Surgery Punch Tips Item No. Stainless Steel Punch Tip for implant placement For use with all diameters. Connects to punch handle. 06-PTM ENDOPORE® BICORTICAL ® Osteotome Punch Tips Osteotome punch tips connect to the punch handles. Osteotome Tip #1 Osteotome Tip #2 Osteotome Tip #3 06-OT1 06-OT2 06-OT3 Tip #1 Wrench and Driver Item No. Tip Wrench The tip wrench is used for tightening or loosening trial fit gages, punch tip and osteotome tips to the punch handles. 06-TW Hex Driver 0.05” – short length 13 mm 06-HDS Tip #2 Tip #3 41 13 mm Cover Screw Trephines Item No. Cover Screw Trephines for implant Ø 3.5 mm 06M-3.5TR/CS for implant Ø 4.1 mm 06-4.1TR/CS for implant Ø 5.0 mm 06W-5.0TR/CS Tissue Punch Item No. Tissue Punch The metal tissue punch attaches to the drill handpiece and will cleanly section a 4.3 mm diameter flap of tissue over the implant. 06-TP ENDOPORE® Articles in alphabetic order Articles in alphabetic order Item 42 Angled Abutments for -External Hex -Internal Hex Cementable Abutments for Internal Connection Cover Screw for - Internal connection - Internal Hex - External Hex Cover Screw Trephines Crestotom Dalla Bona Abutment System for - Internal Connection - Internal Hex - External Hex Drill Extension Driver Extension Driver Housing Driver Tips ECO Abutment System Guide Pin Healing Abutments for - Internal Hex - External Hex Hex Driver Hex Tip 0.05" Hex Tip 0.05", short Hex Abutments for - Internal Hex - External Hex Implant Analogs for - Internal Hex - External Hex Implant Burs Implants with - Internal Connection - Internal Hex - External Hex Initial Perforation (IP) Drill Insertion Tip Latch Driver Page 30 16 7 7 14 26 41 39 10 19 33 40 36 8/10/36 36 7 37 14 26 36/41 8/36 36 16 29/30 15 28 39 4 11 22 39 8 37 Item Lapping Tool with guide pin Locator Abutments for - Internal Connection - Internal Hex - External Hex Mallet Octabutment System O-Ring Abutment System (ORS) for - Internal Connection - Internal Hex - External Hex Osteotome Instrument Tray, fully equipped Paralleling Pin Punch Handles Punch Tips Reamer Retaining Screws Round Bur Surgical Instrument Tray, fully equipped Temporary Titanium Abutments Tip Wrench Tissue Punch Torque Wrench 20 Ncm Ratchet Torque Wrench 30 Ncm Ratchet Transfer Copings for - Internal Hex - External Hex Trial Fit Gages/Osteotome Final Tips Twist Drills UCLA-Abutments for - Internal Hex - External Hex UMA O-Ring Abutment System for External Hex UMA System for - Internal Hex - External Hex UMA Abutment Driver UMA Friction Grip Driver Waxing Sleeve Page 37 9 18 32 40 8 10 19 32 38 40 40 41 37 15/28 39 38 30 41 41 9/18/36 36 15 27 40 39 17 31 35 20 34 36 37 37 PerfeCT SURFACE ENDOPORE® Implant Internal Connection Osteotome PROCEDURES Internal Hex EXTERNAL HEX peRfect External Hex INTERNAL HEX INTERNAL PERFECT SURFACE Implant Placement Procedure Innovative products PITT-EASY® ENDOPORE® BICORTICAL® BIORESORB® CYTOPLAST® INNOVA – ORALTRONICS – ATTACHMENTS INTERNATIONAL A World of Implant Solutions The dental implant platform of Sybron Dental Specialties (SDS) brings together three organizations that have been leaders in implant manufacturing, design and development since the inception of implant dentistry. Delivering two of the most respected, leading-edge dental implants on the market – ENDOPORE® and PITT-EASY® – we are giving you access to a world of implant solutions. Manufacturer: Innova Corporation 522 University Ave Suite 1200 Toronto, ON M5G 1W7 · Canada www.innovalife.com ORALTRONICS® Dental Implant Technology GmbH Herrlichkeit 4 · 28199 Bremen · Germany Phone +49 421 43939-0 · Fax +49 421 443936 www.oraltronics.com · info@oraltronics.com 07-0189: 06/07 Distributed by:
Jose Leo
Connie
Ahmed
