EarthWay® EV-N

Transcription

EarthWay® EV-N
™
55Accurate Spreading
with the New
SideSpred-Control™
from EarthWay®
55NO need for a side
deflector
55Uniform application
rates
55Keeps fertilizer off
sidewalks or out of
flower beds
55Great for up to the
edge spreading
EarthWay® the LEADER
in broadcast spreading
technology!
SideSpred-Control™
Spread Pattern - front and
to the right
EarthWay® EV-N-SPRED®
Broadcast Spreaders
CO
NT
RO
L
™
SideSpred-Control™
D-
HWAY WARRANT
ART
DE
SI
E
Y
SP
RE
Y
E
with the exclusive
HWAY WARRANT
ART
© 2016 Earthway Products, Inc. All rights reserved. EarthWay® EV-N-SPRED ®, FLEX-SELECT®, and SPRAY-PRO ® are registered trademarks of Earthway Products, Inc.
Use of trademarks are prohibited unless approved by Earthway Products, Inc. 1009 Maple Street Bristol, Indiana 46507
EarthWay® EV-N-SPRED®
SideSpred-Control™
The NEW EarthWay® EV-N-SPRED® with SideSpredControl™ broadcast spreader models are built in
the USA and are engineered for extremely accurate
application rates, easy operation, and long life.
EV-N-SPRED® models are lightweight, highly
maneuverable spreaders that apply any granular material
or grass seed fast, easy and accurately. The models are
designed for maximum user comfort and convenience
with controls logically placed for easy use.
The SideSpred-Control™ is a new innovation that
eliminates the need to use a side deflector, which can
adversely affect your application rate, to prevent material
from being spread into flowerbeds, on sidewalks, or
driveways. The SideSpred-Control™ maintains the
correct application rate while it is activated, giving you
excellent results in seeding or spreading while controlling
the spread pattern on the left side of the spreader. The
SideSpred-Control™ is an EarthWay® exclusive.
Operation
The SideSpred-Control™ lever is located on the
back of the hopper at the bottom. To operate the SideSpred-Control™, slide the control lever from the left,
to the right. This will activate the SideSpred-Control™ for a partial spread pattern and prevent material
from being spread to the left side of the spreader. Position the left wheel of your spreader 12”-16” from the
sidewalk, flowerbed, or driveway and spread as normal. When you have completed this spreading pass, open the
SideSpred-Control™ by sliding the control lever from right to left, for a full spread pattern.
Patents pending
™
VIDEO

Similar documents

2040PiPlus Manual 2012 - 52214PIR.indd

2040PiPlus Manual 2012 - 52214PIR.indd  Clean your spreader thoroughly after each use. Wash with clean water and dry thoroughly and spray a light coating of oil on all metal parts (inside all of the tubing) to help prevent corrosion. ...

More information