Schneider Conext XW Application Note

Schneider Electric
Conext XW
Conext XW System
TM
One Solution for Global Power
Conext XW is an adaptable pure sine wave, single-phase and three-phase inverter/charger system with global grid-tie functionality and dual AC
power inputs. Available solar charge controllers, monitoring, and automated generator control modules enable further adaptability. From single
Conext XW units to multiple clusters of units, up to 36kW each, the Conext XW is a scalable system that allows for the integration of solar capacity
as required.
Adaptable and scalable, the Schneider Electric Conext XW system is the One Solution for global grid-interactive and off-grid, residential and
commercial, solar and backup power applications.
Why Select Conext XW?
Easy to Install
• Devices Configure Quickly into a Stylish Wall Mounted System
• Inverters Connect Both Grid and Generator Power with Dual
AC Input
Flexible
• Adapts to Single and Three-phase Systems
• Scales for Residential or Large Power Installations
• Supports DC Coupled and AC Coupled Solutions
Easy to Service
• Remote Monitoring and Configuration
• Replaceable Boards and Components
• Global Support
Higher Return on Investment
Products Shown:
Schneider Electric Conext XW inverter/charger, XW PDP,
XW CB, and MPPT 60 150 solar charge controller
• Sell Power to the Utility with Global Grid Sell Function
• Harness the Continuously Declining Production Cost of Solar Power
• Hybrid Integration of Generator Reduces Diesel Fuel Costs
Applications for the Conext XW
> Residential Backup Power
> Commercial Backup Power
> Residential Grid-interactive
Solar with Battery Backup
> Commercial Grid-interactive
Solar with Battery Backup
> Residential Off-grid Solar
> Commercial Off-grid Solar
with Battery Backup
> Community Electrification
The Future
The Conext XW grid interactive feature-set is a key enabler for residential self consumption systems and utility demand
response systems. Conext XW supports both AC Coupled and DC Coupled self-consumption models. Communications
functionality allows utility operators remote access to Conext XW. Conext XW is compatible with Lithium Ion battery packs.
> Commercial Backup Power
Battery
Grid
Conext XW
Generator
Commercial Load
Conext XW integrates with commercial building switchgear to seamlessly and instantly convert power from battery reserves to maintain operation
of critical loads such as security, data and communication systems, as well as pumps and machinery when the power grid fails or browns out.
When utility power is readily available, the Conext XW will keep the battery bank fully charged, ready for the next time.
Conext XW systems can be scaled up to 36kW and configured for single-phase, split-phase or three-phase power. The Conext XW easily
integrates with a generator for extended backup time.
> Commercial Grid-interactive Solar with Battery Backup
PV Modules
Battery
Grid
Solar Charge
Controller
Generator
Conext XW
Commercial Load
In addition to providing backup power for commercial operations, the Conext XW easily integrates Photovoltaic (PV) power reducing business
dependency on utility power by offsetting consumption and increasing the return on investment. Conext XW can also manage load shifting to
avoid expensive time-of-day electricity charges. Integrating PV power in regions with weak or intermittent grid power will allow businesses to
operate for extended periods of time without grid power.
Conext XW systems can be scaled up to 36kW and configured for single-phase, split-phase or three-phase power. The Conext XW easily
integrates with a generator to further increase business operating time when the grid is down. The control and monitoring capabilities of the
Conext XW system provides businesses with management information to ensure dependability is maintained and systems operate as they should.
> Commercial Off-grid Solar
PV Modules
Battery
Solar Charge
Controller
Generator
Conext XW
Residential Load
Wherever independent off-grid power is required for the operation of remote farms, monitoring stations, telecom towers or work camps, the
Conext XW is a cost effective replacement for a diesel generator.
If PV production is insufficient or unavailable to meet demand, a generator can be integrated by the Conext XW and managed by the Automatic
Generator Start (AGS) module to assist with loads and recharge batteries as required. For existing off-grid diesel generator power systems,
integrating a Conext XW will facilitate the decrease in both generator run time and corresponding fuel costs.
The control and monitoring capabilities of the Conext XW system provides power management information for operators and peace of mind that
remote property is secure and power dependent systems are operating as they should.
> Residential Backup Power
Battery
Grid
Generator
Conext XW
Residential Load
Homeowners embrace the Conext XW because it allows for fully-automated, hassle-free, backup power.
Unlike a plug-in backup power pack or portable generator, the Conext XW inverter/charger is integrated into the electrical system and seamlessly
converts power from battery reserves to support critical loads such as pumps, security systems, refrigerators and electronics in the event of a power
outage or brown-out. When utility power is readily available, the XW will keep the battery bank fully charged and ready for the next grid failure.
The Conext XW easily integrates with a generator for extended backup power.
> Residential Grid-interactive Solar with Backup
PV Modules
Battery
Grid
Solar Charge
Controller
Generator
Conext XW
Residential Load
In addition to providing residential backup power, the Conext XW’s ability to easily integrate PV power will help reduce household dependency on
utility power by offsetting consumption.
Conext XW supports DC coupled and AC coupled grid-tie systems. Conext XW’s grid-interactive feature also provides a means to sell excess
power back to the utility, qualifying homeowners for locally available feed-in tariff programs and green tax credits, further increasing the return on
investment. The Conext XW easily integrates with a generator for extended backup power.
> Residential Off-grid Solar
PV Modules
Battery
Solar Charge
Controller
Generator
Conext XW
Residential Load
For off-grid home owners, Conext XW inverter chargers provide AC power from batteries. Conext XW systems Maximum Power Point Tracking
(MPPT) solar charge controllers enable PV modules to directly charge batteries. The pure sine wave output and high surge capabilities of Conext
XW inverter/chargers start and run pumps with ease, enabling key water and sewage systems, and assisting smaller generators in starting difficult
loads. The Conext XW can integrate a fuel based generator enabling cost effective hybrid off-grid power solutions.
The control and monitoring capabilities of the Conext XW system provides off-grid home owners with management information to ensure
dependability is maintained and systems operate as they should.
> Rural / Community Electrification
PV Modules
Battery
Solar Charge
Controller
Generator
Conext XW
Community Loads
Conext XW is adaptable and scalable, powering off-grid communities around the world and helping them qualify for renewable energy funding
programs to establish reliable, high-quality localized community power plants. By coupling to renewable PV energy generation through the
DC system, Conext XW delivers a more affordable AC power solution than traditional off-grid systems that rely on power supplied from diesel
generators alone.
Conext XW community based off-grid systems scale up in 36 kW clusters and are expandable at any time. Conext XW supplies a standard
AC voltage grid, enabling communities to not only benefit from the low cost and wide variety of common AC appliances and tools, but also
from the continuously declining cost of renewable PV power generation. Conext XW will also integrate diesel generators into a hybrid off-grid
system increasing the flexibility and reliability of the entire system while still reducing community dependence on the ever increasing cost of
fuel generators.
Remote system monitoring and management is available for the supervision of Conext XW and supporting system components.
The Schneider Electric Conext XW system is the One Solution for grid-interactive and off-grid, residential
and commercial, solar and backup power applications.
Conext XW Accessories
XW PDP
(865-1015)
The XW PDP Power Distribution Panel with conduit box is factory-wired and labeled to support North American
code-compliant Conext XW inverter installations. Additional wiring and breaker kits can be added to a single
XW PDP to integrate up to three Conext XW and four MPPT solar charge controllers.
XW CB
(865-1025)
The XW CB Conduit Box attaches to the bottom of a single Conext XW concealing all wiring creating a neat and
square installation alongside both the XW PDP and MPPT Solar Charge Controllers.
XW CK
(865-1020)
The XW CK Connection Kit is a wiring kit and single conduit box used to connect a second Conext XW to the
XW PDP. All wires are measured, pre-cut and labeled for quick and easy installation.
SCP
(865-1050)
The XW SCP System Control Panel provides a single point of control to setup and monitor an entire system of
Conext XW inverter/chargers, MPPT Solar Charge Controllers, XW AGS modules.
AGS
(865-1060)
The XW AGS Automatic Generator Start module automatically controls activation of a generator to provide Conext
XW with power to recharge depleted batteries or assist with heavy loads. The XW AGS adds intelligent power
management and eliminates time spent monitoring batteries and inverter loads.
Conext Combox Communication Device
(865-1058)
Operators of Conext solar systems can now remotely monitor yield performance using devices of their
choice, such as personal computers, tablet devices, or building management systems. Conext CM is
compatible with Xanbus protocol devices.
MPPT 60 150 Solar Charge Controller
(865-1030-1)
The MPPT 60 150 Solar Charge Controller tracks the maximum power point of a photovoltaic (PV) array to deliver
the maximum available DC current directly to the battery bank for charging. Deployable as stand-alone unit or in
multiples, the MPPT 60 150 also fully integrates with the Conext XW inverter/charger as a system.
MPPT 80 600 Solar Charge Controller
(865-1032)
The MPPT 80 600 Solar Charge Controller offers an industry-first set of features and top performance that allows
for large PV array systems to be easily installed and DC Coupled to the battery bank at the lowest overall cost.
Fast Sweep™ MPPT charging technology helps harvest the most energy available from the PV array, even in
partial shade conditions. 80 A of battery charge current allows for the connection of PV arrays rated up to 600 V.
Deployable as stand-alone unit or in multiples, the MPPT 80 600 also fully integrates with the Conext XW inverter/
charger as a system.
Conext XW Series (230 V / 50 Hz)
Device short name
XW4024 230 50
XW6048 230 50
Continuous power
4.0 kVA
6.0 kVA
Surge rating 8.0 kVA (20 sec)
12.0 kVA (15 sec)
Output current
17.4 A
26.1 A
Peak output current
35 A
53 A
Input current at rated power
178 A
131 A
Type of signal
True sine wave
True sine wave
Automatic transfer relay
56 A
56 A
Typical transfer time 8 ms
8 ms
DC input voltage (nominal) 25.2 V 50.4 V
Input voltage limits 22 to 32 V
44 to 64 V
Charging current 150 A
100 A
Power factor corrected charging
0.98
0.98
Auxiliary relay output 0 to 12 V, maximum 250 mA DC
0 to 12 V, maximum 250 mA DC
Power consumption (search mode) < 7 W
<7W
AC input voltage (nominal)
230 V +/- 3%
230 V +/- 3%
Input voltage limits (bypass/charge mode)
165 to 280 V (230 V nominal)
165 to 280 V (230 V nominal)
Frequency
50 Hz +/- 0.1 Hz
50 Hz +/- 0.1 Hz
AC input frequency range (bypass/charge mode)
40 to 68 Hz (50 Hz nominal)
40 to 68 Hz (50 Hz nominal)
Total harmonic distortion (THD)
< 5% at rated power
< 5% at rated power
AC connections
AC1 (Grid), AC2 (Generator)
AC1 (Grid), AC2 (Generator)
AC input breaker
60 A single-pole
60 A single-pole
Utility interactive
Available
Available
Electrical specifications
Efficiency
Peak
94.0%95.4%
General specifications
IP degree of protection
IP20 (sensitive electric components sealed inside enclosure)
Product weight
52.5 kg (116.0 lb)
55.2 kg (121.7 lb)
Shipping weight
74.0 kg (163.0 lb)
76.7 kg (169.0 lb)
Product dimensions (H x W x D)
58 x 41 x 23 cm (23.0 x 16.0 x 9.0 in) 58 x 41 x 23 cm (23.0 x 16.0 x 9.0 in)
Shipping dimensions (H x W x D)
71.1 x 57.2 x 39.4 cm
(28.0 x 22.5 x 15.5 in)
71.1 x 57.2 x 39.4 cm
(28.0 x 22.5 x 15.5 in)
Device mounting
Wall mount (backplate included)
Wall mount (backplate included)
Ambient air temperature for operation
-25°C to 70°C (-13°F to 158°F) (power derated above 45°C (113°F))
System Network and Remote Monitoring
Available
Available
Warranty
Five-year standard
Five-year standard
Part number
865-1045-61 865-1035-61
Features and options
Display typeStatus LEDs indicate AC In status, faults/warnings, equalize mode, On/Off and equalize button battery level.
Three-character display indicates output power or charge current
Supported battery types
Flooded (default), Gel, AGM, custom Flooded (default), Gel, AGM, customFlooded (default), Gel, AGM, custom
Battery bank size
100 to 2000 Ah (scaled to PV array size)
Battery temperature sensor
Included
Included
Non volatile memory
Yes
Yes
Multiple unit configurations
Single-phase: up to four parallel units. Three-phase: two units per phase
Regulatory approval
CE marked according to the following EU directives and standards:
EMC Directive
EN61000-6-1, EN61000-6-3, EN61000-3-2, EN61000-3-3
Low Voltage Directive
EN50178
RCM Marked and Compliant
AS 4777.2, AS 4777.3, AS/NZS 3100
Specifications are subject to change without notice.
Conext XW Series (120 / 240 V / 60 Hz)
Device short name
XW4024 120 240 60
XW6048 120 240 60
Continuous power
4.0 kVA
6.0 kVA
Surge rating
8.0 kVA (20 sec)
12.0 kVA (15 sec)
Peak output current
L-N: 70 A (20 sec), L-L: 35 A (20 sec)
L-N: 105 A (15 sec), L-L: 52.5 A (15 sec)
Input current at rated power
178 A
130 A
Type of signal
True sine wave
True sine wave
Automatic transfer relay
60 A
60 A
Typical transfer time
8 ms
8 ms
DC input voltage (nominal) 25.2 V 50.4 V
Input voltage limits
22 to 32 V 44 to 64 V
Charging current
150 A
100 A
Power factor corrected charging 0.98
0.98
Auxiliary relay output 0 to 12 V, maximum 250 mA DC
0 to 12 V, maximum 250 mA DC
Idle consumption (search mode) < 8 W
<8W
AC input voltage (nominal)
120 / 240 V split-phase 120 / 240 V split-phase
AC output voltage
L-N: 120 V +/- 3%; L-L: 240 V +/- 3%
L-N: 120 V +/- 3%; L-L: 240 V +/- 3%
Input voltage limits (bypass/charge mode)
L-N: 80 to 150 V (120 V nominal); L-L: 160 to 270 V (240 V nominal)
AC1 voltage range (sell mode) L-N: 108 to 130 +/- 1.5 V; L-L: 214 to 260 +/- 3.0 V (automatically adjusts when entering sell mode)
Frequency
60 +/-0.1 Hz
AC input frequency range (bypass/charge mode)
55 to 65 Hz (default); 44 - 70 Hz (allowable)
AC1 frequency range (sell mode) 59.4 to 60.4 +/- 0.05 Hz (automatically adjusts when entering sell mode)
Total harmonic distortion (THD)
< 5%
< 5%
AC connections AC1 (Grid), AC2 (Generator)
AC1 (Grid), AC2 (Generator)
AC input breaker
60 A two-pole
60 A two-pole
Utility interactive
Yes
Yes
CEC power rating 4.0 kW 5.752 kW
Electrical specifications
60 +/-0.1 Hz
Efficiency
Peak
94.0%95.4%
CEC weighted 91.0%
92.5%
General specifications
NEMA degree of protection
NEMA1R (Indoor rating) (sensitive electronic components sealed inside enclosure)
Product weight 52.5 kg (116.0 lb)
55.2 kg (121.7 lb)
Shipping weight
74.0 kg (163.0 lb)
76.7 kg (169.0 lb)
Product dimensions (H x W x D)
58 x 41 x 23 cm (23.0 x 16.0 x 9.0 in)
58 x 41 x 23 cm (23.0 x 16.0 x 9.0 in)
Shipping dimensions (H x W x D)
71.1 x 56.5 x 26.7 cm (28.0 x 22.3 x 10.5 in) 71.1 x 56.5 x 26.7 cm (28.0 x 22.3 x 10.5 in)
Ambient air temperature for operation
-25 to 70°C (-13 to 158°F) (power derated above 45°C (113°F))
System Network and Remote Monitoring
Available
Available
Warranty
Five-year standard
Five-year standard
Part number
865-1010
865-1000-01
Features and options
Display type
Status LEDs indicate AC In status, faults/warnings, equalize mode, battery level. Three-character display indicates
output power or charge current, fault/warning codes. On/off and equalize buttons
Supported battery types
Flooded (default), Gel, AGM, custom
Battery bank size
100 to 2000 Ah (scaled to PV array size)
Battery temperature sensor
Included
Multiple-unit configurations
Split-phase: up to four parallel units in 120/240 V. Three-phase: up to two units per phase (six units total)
Regulatory approvals
Safety
UL1741, CSA 107.1
EMC
FCC and Industry Canada Class B
Interconnect
IEEE 1547 and CSA 107.1
Specifications are subject to change without notice.
Flooded (default), Gel, AGM, custom
Included
Head office
Schneider Electric
35 rue Joseph Monier
CS30323
92506 Rueil-Malmaison
Tel.: +33 (0)1 41 29 85 00
France
As a global specialist in energy management with operations in more than 100 countries,
Schneider Electric offers integrated solutions across multiple market segments, including
leadership positions in energy and infrastructure, industrial processes, building automation,
and data centres/networks, as well as a broad presence in residential applications. Focused
on making energy safe, reliable, and efficient, the company's 100,000 plus employees achieved
sales of 22 billion euros in 2011, through an active commitment to help individuals and
organizations "Make the most of their energy".
re.pvsales@schneider-electric.com
www.schneider-electric.com/conextxw
Follow us on twitter @SESolar
BR20120817_XW_01
Copyright © 2012 Schneider Electric. All Rights Reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies.
The mark IEEE Std 802.3-2005TM is the registered trademark of the Institute of Electrical and Electronics Engineers, Inc.
Make the most of your energy